Oct  6 10:14:52 cecco-desktop kernel: [349807.635551] npviewer.bin[8721]: segfault at 6a4 ip 00000000f6a47f91 sp 00000000ff886370 error 6 in libflashplayer.so[f67fe000+990000]
Oct  6 11:28:51 cecco-desktop kernel: [354246.792074] nm-connection-e[11536]: segfault at 20 ip 00007f627ea0c550 sp 00007fff8922a030 error 4 in libpolkit-gnome.so.0.0.0[7f627ea08000+a000]
Oct  6 13:45:49 cecco-desktop kernel: [362464.642636] sd 6:0:0:3: [sde] 3962880 512-byte hardware sectors: (2.02 GB/1.88 GiB)
Oct  6 13:45:49 cecco-desktop kernel: [362464.643384] sd 6:0:0:3: [sde] Write Protect is off
Oct  6 13:45:49 cecco-desktop kernel: [362464.643386] sd 6:0:0:3: [sde] Mode Sense: 03 00 00 00
Oct  6 13:45:49 cecco-desktop kernel: [362464.643389] sd 6:0:0:3: [sde] Assuming drive cache: write through
Oct  6 13:45:49 cecco-desktop kernel: [362464.644011] sd 6:0:0:3: [sde] 3962880 512-byte hardware sectors: (2.02 GB/1.88 GiB)
Oct  6 13:45:49 cecco-desktop kernel: [362464.644790] sd 6:0:0:3: [sde] Write Protect is off
Oct  6 13:45:49 cecco-desktop kernel: [362464.644793] sd 6:0:0:3: [sde] Mode Sense: 03 00 00 00
Oct  6 13:45:49 cecco-desktop kernel: [362464.644795] sd 6:0:0:3: [sde] Assuming drive cache: write through
Oct  6 13:45:49 cecco-desktop kernel: [362464.644800]  sde: sde1
Oct  6 14:56:55 cecco-desktop NetworkManager: <info>  (eth0): device state change: 8 -> 3 
Oct  6 14:56:55 cecco-desktop NetworkManager: <info>  (eth0): deactivating device (reason: 38). 
Oct  6 14:56:55 cecco-desktop NetworkManager: <WARN>  check_one_route(): (eth0) error -34 returned from rtnl_route_del(): Sucess  
Oct  6 14:58:09 cecco-desktop kernel: Inspecting /boot/System.map-2.6.28-15-generic
Oct  6 14:58:09 cecco-desktop kernel: Cannot find map file.
Oct  6 14:58:09 cecco-desktop kernel: Loaded 61504 symbols from 146 modules.
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000] BIOS EBDA/lowmem at: 0009ec00/0009ec00
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000] Initializing cgroup subsys cpuset
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000] Initializing cgroup subsys cpu
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000] Linux version 2.6.28-15-generic (buildd@yellow) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #52-Ubuntu SMP Wed Sep 9 10:48:52 UTC 2009 (Ubuntu 2.6.28-15.52-generic)
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000] Command line: root=UUID=b86e8a62-c5b4-4a1d-8797-e93c775881c0 ro quiet splash locale=it_IT 
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000] KERNEL supported cpus:
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000]   Intel GenuineIntel
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000]   AMD AuthenticAMD
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000]   Centaur CentaurHauls
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000] BIOS-provided physical RAM map:
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000]  BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000]  BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000]  BIOS-e820: 0000000000100000 - 00000000cffb0000 (usable)
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000]  BIOS-e820: 00000000cffb0000 - 00000000cffbe000 (ACPI data)
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000]  BIOS-e820: 00000000cffbe000 - 00000000cfff0000 (ACPI NVS)
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000]  BIOS-e820: 00000000cfff0000 - 00000000d0000000 (reserved)
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000]  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000]  BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000] DMI present.
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working it around.
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000] last_pfn = 0x130000 max_arch_pfn = 0x3ffffffff
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000] last_pfn = 0xcffb0 max_arch_pfn = 0x3ffffffff
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000] Scanning 0 areas for low memory corruption
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000] modified physical RAM map:
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000]  modified: 0000000000000000 - 0000000000010000 (reserved)
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000]  modified: 0000000000010000 - 000000000009ec00 (usable)
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000]  modified: 000000000009ec00 - 00000000000a0000 (reserved)
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000]  modified: 00000000000e4000 - 0000000000100000 (reserved)
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000]  modified: 0000000000100000 - 00000000cffb0000 (usable)
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000]  modified: 00000000cffb0000 - 00000000cffbe000 (ACPI data)
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000]  modified: 00000000cffbe000 - 00000000cfff0000 (ACPI NVS)
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000]  modified: 00000000cfff0000 - 00000000d0000000 (reserved)
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000]  modified: 00000000fee00000 - 00000000fee01000 (reserved)
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000]  modified: 00000000fff00000 - 0000000100000000 (reserved)
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000]  modified: 0000000100000000 - 0000000130000000 (usable)
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000] init_memory_mapping: 0000000000000000-00000000cffb0000
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000]  0000000000 - 00cfe00000 page 2M
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000]  00cfe00000 - 00cffb0000 page 4k
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000] kernel direct mapping tables up to cffb0000 @ 10000-16000
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000] last_map_addr: cffb0000 end: cffb0000
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000] init_memory_mapping: 0000000100000000-0000000130000000
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000]  0100000000 - 0130000000 page 2M
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000] kernel direct mapping tables up to 130000000 @ 14000-1a000
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000] last_map_addr: 130000000 end: 130000000
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000] RAMDISK: 37868000 - 37fef39c
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000] ACPI: RSDP 000FC310, 0014 (r0 HPQOEM)
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000] ACPI: RSDT CFFB0000, 0040 (r1 HPQOEM SLIC-CPC 20070927 MSFT       97)
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000] ACPI: FACP CFFB0200, 0084 (r2 HPQOEM SLIC-CPC 20070927 MSFT       97)
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000] ACPI: DSDT CFFB0440, 5608 (r1 HPQOEM SLIC-CPC        0 INTL 20051117)
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000] ACPI: FACS CFFBE000, 0040
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000] ACPI: APIC CFFB0390, 006C (r1 HPQOEM SLIC-CPC 20070927 MSFT       97)
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000] ACPI: MCFG CFFB0400, 003C (r1 HPQOEM SLIC-CPC 20070927 MSFT       97)
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000] ACPI: OEMB CFFBE040, 0071 (r1 HPQOEM SLIC-CPC 20070927 MSFT       97)
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000] ACPI: HPET CFFB5A50, 0038 (r1 HPQOEM SLIC-CPC 20070927 MSFT       97)
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000] ACPI: GSCI CFFBE0C0, 2024 (r1 HPQOEM SLIC-CPC 20070927 MSFT       97)
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000] ACPI: SLIC CFFC00F0, 0176 (r1 HPQOEM SLIC-CPC        1 MSFT        1)
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000] ACPI: Local APIC address 0xfee00000
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000] (7 early reservations) ==> bootmem [0000000000 - 0130000000]
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000]   #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000]   #2 [0000200000 - 0000b7cbb0]    TEXT DATA BSS ==> [0000200000 - 0000b7cbb0]
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000]   #3 [0037868000 - 0037fef39c]          RAMDISK ==> [0037868000 - 0037fef39c]
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000]   #4 [000009ec00 - 0000100000]    BIOS reserved ==> [000009ec00 - 0000100000]
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000]   #5 [0000010000 - 0000014000]          PGTABLE ==> [0000010000 - 0000014000]
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000]   #6 [0000014000 - 0000015000]          PGTABLE ==> [0000014000 - 0000015000]
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000] found SMP MP-table at [ffff8800000ff780] 000ff780
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000]  [ffffe20000000000-ffffe200043fffff] PMD -> [ffff880028200000-ffff88002c5fffff] on node 0
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000] Zone PFN ranges:
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000]   DMA      0x00000010 -> 0x00001000
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000]   DMA32    0x00001000 -> 0x00100000
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000]   Normal   0x00100000 -> 0x00130000
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000] Movable zone start PFN for each node
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000] early_node_map[3] active PFN ranges
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000]     0: 0x00000010 -> 0x0000009e
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000]     0: 0x00000100 -> 0x000cffb0
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000]     0: 0x00100000 -> 0x00130000
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000] On node 0 totalpages: 1048382
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000]   DMA zone: 56 pages used for memmap
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000]   DMA zone: 2535 pages reserved
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000]   DMA zone: 1391 pages, LIFO batch:0
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000]   DMA32 zone: 14280 pages used for memmap
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000]   DMA32 zone: 833512 pages, LIFO batch:31
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000]   Normal zone: 2688 pages used for memmap
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000]   Normal zone: 193920 pages, LIFO batch:31
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000]   Movable zone: 0 pages used for memmap
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000] ACPI: PM-Timer IO Port: 0x808
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000] ACPI: Local APIC address 0xfee00000
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000] IOAPIC[0]: apic_id 4, version 0, address 0xfec00000, GSI 0-23
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000] ACPI: IRQ0 used by override.
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000] ACPI: IRQ2 used by override.
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000] ACPI: IRQ9 used by override.
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000] Using ACPI (MADT) for SMP configuration information
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000] PM: Registered nosave memory: 00000000cffb0000 - 00000000cffbe000
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000] PM: Registered nosave memory: 00000000cffbe000 - 00000000cfff0000
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000] PM: Registered nosave memory: 00000000cfff0000 - 00000000d0000000
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000fee00000
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000fff00000
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000] Allocating PCI resources starting at d4000000 (gap: d0000000:2ee00000)
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000] PERCPU: Allocating 69632 bytes of per cpu data
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000] NR_CPUS: 64, nr_cpu_ids: 4, nr_node_ids 1
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1028823
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000] Kernel command line: root=UUID=b86e8a62-c5b4-4a1d-8797-e93c775881c0 ro quiet splash locale=it_IT 
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000] Initializing CPU#0
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000] Fast TSC calibration using PIT
Oct  6 14:58:09 cecco-desktop kernel: [    0.000000] Detected 2399.994 MHz processor.
Oct  6 14:58:09 cecco-desktop kernel: [    0.004000] Console: colour VGA+ 80x25
Oct  6 14:58:09 cecco-desktop kernel: [    0.004000] console [tty0] enabled
Oct  6 14:58:09 cecco-desktop kernel: [    0.004000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Oct  6 14:58:09 cecco-desktop kernel: [    0.004000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Oct  6 14:58:09 cecco-desktop kernel: [    0.004000] allocated 49807360 bytes of page_cgroup
Oct  6 14:58:09 cecco-desktop kernel: [    0.004000] please try cgroup_disable=memory option if you don't want
Oct  6 14:58:09 cecco-desktop kernel: [    0.004000] Scanning for low memory corruption every 60 seconds
Oct  6 14:58:09 cecco-desktop kernel: [    0.004000] Checking aperture...
Oct  6 14:58:09 cecco-desktop kernel: [    0.004000] No AGP bridge found
Oct  6 14:58:09 cecco-desktop kernel: [    0.004000] Calgary: detecting Calgary via BIOS EBDA area
Oct  6 14:58:09 cecco-desktop kernel: [    0.004000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Oct  6 14:58:09 cecco-desktop kernel: [    0.004000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Oct  6 14:58:09 cecco-desktop kernel: [    0.004000] Placing software IO TLB between 0x20000000 - 0x24000000
Oct  6 14:58:09 cecco-desktop kernel: [    0.004000] Memory: 3984280k/4980736k available (4749k kernel code, 787208k absent, 208300k reserved, 2523k data, 536k init)
Oct  6 14:58:09 cecco-desktop kernel: [    0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Oct  6 14:58:09 cecco-desktop kernel: [    0.004000] hpet clockevent registered
Oct  6 14:58:09 cecco-desktop kernel: [    0.004000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
Oct  6 14:58:09 cecco-desktop kernel: [    0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4799.98 BogoMIPS (lpj=9599976)
Oct  6 14:58:09 cecco-desktop kernel: [    0.004000] Security Framework initialized
Oct  6 14:58:09 cecco-desktop kernel: [    0.004000] SELinux:  Disabled at boot.
Oct  6 14:58:09 cecco-desktop kernel: [    0.004000] AppArmor: AppArmor initialized
Oct  6 14:58:09 cecco-desktop kernel: [    0.004000] Mount-cache hash table entries: 256
Oct  6 14:58:09 cecco-desktop kernel: [    0.004000] Initializing cgroup subsys ns
Oct  6 14:58:09 cecco-desktop kernel: [    0.004000] Initializing cgroup subsys cpuacct
Oct  6 14:58:09 cecco-desktop kernel: [    0.004000] Initializing cgroup subsys memory
Oct  6 14:58:09 cecco-desktop kernel: [    0.004000] Initializing cgroup subsys freezer
Oct  6 14:58:09 cecco-desktop kernel: [    0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
Oct  6 14:58:09 cecco-desktop kernel: [    0.004000] CPU: L2 cache: 4096K
Oct  6 14:58:09 cecco-desktop kernel: [    0.004000] CPU: Physical Processor ID: 0
Oct  6 14:58:09 cecco-desktop kernel: [    0.004000] CPU: Processor Core ID: 0
Oct  6 14:58:09 cecco-desktop kernel: [    0.004000] using mwait in idle threads.
Oct  6 14:58:09 cecco-desktop kernel: [    0.004000] ACPI: Core revision 20080926
Oct  6 14:58:09 cecco-desktop kernel: [    0.004719] ACPI: Checking initramfs for custom DSDT
Oct  6 14:58:09 cecco-desktop kernel: [    0.280046] Setting APIC routing to flat
Oct  6 14:58:09 cecco-desktop kernel: [    0.280463] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
Oct  6 14:58:09 cecco-desktop kernel: [    0.322600] CPU0: Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz stepping 0b
Oct  6 14:58:09 cecco-desktop kernel: [    0.324001] Booting processor 1 APIC 0x1 ip 0x6000
Oct  6 14:58:09 cecco-desktop kernel: [    0.004000] Initializing CPU#1
Oct  6 14:58:09 cecco-desktop kernel: [    0.004000] Calibrating delay using timer specific routine.. 7199.76 BogoMIPS (lpj=14399539)
Oct  6 14:58:09 cecco-desktop kernel: [    0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
Oct  6 14:58:09 cecco-desktop kernel: [    0.004000] CPU: L2 cache: 4096K
Oct  6 14:58:09 cecco-desktop kernel: [    0.004000] CPU: Physical Processor ID: 0
Oct  6 14:58:09 cecco-desktop kernel: [    0.004000] CPU: Processor Core ID: 1
Oct  6 14:58:09 cecco-desktop kernel: [    0.408569] CPU1: Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz stepping 0b
Oct  6 14:58:09 cecco-desktop kernel: [    0.408591] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Oct  6 14:58:09 cecco-desktop kernel: [    0.412114] Booting processor 2 APIC 0x2 ip 0x6000
Oct  6 14:58:09 cecco-desktop kernel: [    0.004000] Initializing CPU#2
Oct  6 14:58:09 cecco-desktop kernel: [    0.004000] Calibrating delay using timer specific routine.. 4799.90 BogoMIPS (lpj=9599814)
Oct  6 14:58:09 cecco-desktop kernel: [    0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
Oct  6 14:58:09 cecco-desktop kernel: [    0.004000] CPU: L2 cache: 4096K
Oct  6 14:58:09 cecco-desktop kernel: [    0.004000] CPU: Physical Processor ID: 0
Oct  6 14:58:09 cecco-desktop kernel: [    0.004000] CPU: Processor Core ID: 2
Oct  6 14:58:09 cecco-desktop kernel: [    0.500569] CPU2: Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz stepping 0b
Oct  6 14:58:09 cecco-desktop kernel: [    0.500589] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
Oct  6 14:58:09 cecco-desktop kernel: [    0.504086] Booting processor 3 APIC 0x3 ip 0x6000
Oct  6 14:58:09 cecco-desktop kernel: [    0.004000] Initializing CPU#3
Oct  6 14:58:09 cecco-desktop kernel: [    0.004000] Calibrating delay using timer specific routine.. 4813.45 BogoMIPS (lpj=9626909)
Oct  6 14:58:09 cecco-desktop kernel: [    0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
Oct  6 14:58:09 cecco-desktop kernel: [    0.004000] CPU: L2 cache: 4096K
Oct  6 14:58:09 cecco-desktop kernel: [    0.004000] CPU: Physical Processor ID: 0
Oct  6 14:58:09 cecco-desktop kernel: [    0.004000] CPU: Processor Core ID: 3
Oct  6 14:58:09 cecco-desktop kernel: [    0.592598] CPU3: Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz stepping 0b
Oct  6 14:58:09 cecco-desktop kernel: [    0.592618] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
Oct  6 14:58:09 cecco-desktop kernel: [    0.596026] Brought up 4 CPUs
Oct  6 14:58:09 cecco-desktop kernel: [    0.596029] Total of 4 processors activated (21613.11 BogoMIPS).
Oct  6 14:58:09 cecco-desktop kernel: [    0.596087] CPU0 attaching sched-domain:
Oct  6 14:58:09 cecco-desktop kernel: [    0.596089]  domain 0: span 0-1 level MC
Oct  6 14:58:09 cecco-desktop kernel: [    0.596090]   groups: 0 1
Oct  6 14:58:09 cecco-desktop kernel: [    0.596093]   domain 1: span 0-3 level CPU
Oct  6 14:58:09 cecco-desktop kernel: [    0.596095]    groups: 0-1 2-3
Oct  6 14:58:09 cecco-desktop kernel: [    0.596099] CPU1 attaching sched-domain:
Oct  6 14:58:09 cecco-desktop kernel: [    0.596100]  domain 0: span 0-1 level MC
Oct  6 14:58:09 cecco-desktop kernel: [    0.596101]   groups: 1 0
Oct  6 14:58:09 cecco-desktop kernel: [    0.596104]   domain 1: span 0-3 level CPU
Oct  6 14:58:09 cecco-desktop kernel: [    0.596105]    groups: 0-1 2-3
Oct  6 14:58:09 cecco-desktop kernel: [    0.596108] CPU2 attaching sched-domain:
Oct  6 14:58:09 cecco-desktop kernel: [    0.596109]  domain 0: span 2-3 level MC
Oct  6 14:58:09 cecco-desktop kernel: [    0.596110]   groups: 2 3
Oct  6 14:58:09 cecco-desktop kernel: [    0.596113]   domain 1: span 0-3 level CPU
Oct  6 14:58:09 cecco-desktop kernel: [    0.596114]    groups: 2-3 0-1
Oct  6 14:58:09 cecco-desktop kernel: [    0.596117] CPU3 attaching sched-domain:
Oct  6 14:58:09 cecco-desktop kernel: [    0.596118]  domain 0: span 2-3 level MC
Oct  6 14:58:09 cecco-desktop kernel: [    0.596120]   groups: 3 2
Oct  6 14:58:09 cecco-desktop kernel: [    0.596122]   domain 1: span 0-3 level CPU
Oct  6 14:58:09 cecco-desktop kernel: [    0.596123]    groups: 2-3 0-1
Oct  6 14:58:09 cecco-desktop kernel: [    0.596227] net_namespace: 1400 bytes
Oct  6 14:58:09 cecco-desktop kernel: [    0.596227] Booting paravirtualized kernel on bare hardware
Oct  6 14:58:09 cecco-desktop kernel: [    0.596256] Time: 14:57:51  Date: 10/06/09
Oct  6 14:58:09 cecco-desktop kernel: [    0.596256] regulator: core version 0.5
Oct  6 14:58:09 cecco-desktop kernel: [    0.596256] NET: Registered protocol family 16
Oct  6 14:58:09 cecco-desktop kernel: [    0.596256] ACPI: bus type pci registered
Oct  6 14:58:09 cecco-desktop kernel: [    0.596256] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
Oct  6 14:58:09 cecco-desktop kernel: [    0.596256] PCI: Not using MMCONFIG.
Oct  6 14:58:09 cecco-desktop kernel: [    0.596256] PCI: Using configuration type 1 for base access
Oct  6 14:58:09 cecco-desktop kernel: [    0.596758] ACPI: EC: Look up EC in DSDT
Oct  6 14:58:09 cecco-desktop kernel: [    0.605519] ACPI: Interpreter enabled
Oct  6 14:58:09 cecco-desktop kernel: [    0.605527] ACPI: (supports S0 S1 S3 S4 S5)
Oct  6 14:58:09 cecco-desktop kernel: [    0.605543] ACPI: Using IOAPIC for interrupt routing
Oct  6 14:58:09 cecco-desktop kernel: [    0.605591] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
Oct  6 14:58:09 cecco-desktop kernel: [    0.607485] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
Oct  6 14:58:09 cecco-desktop kernel: [    0.615939] PCI: Using MMCONFIG at e0000000 - efffffff
Oct  6 14:58:09 cecco-desktop kernel: [    0.622395] ACPI: No dock devices found.
Oct  6 14:58:09 cecco-desktop kernel: [    0.622448] ACPI: PCI Root Bridge [PCI0] (0000:00)
Oct  6 14:58:09 cecco-desktop kernel: [    0.622521] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
Oct  6 14:58:09 cecco-desktop kernel: [    0.622524] pci 0000:00:01.0: PME# disabled
Oct  6 14:58:09 cecco-desktop kernel: [    0.622594] pci 0000:00:19.0: reg 10 32bit mmio: [0xfe9c0000-0xfe9dffff]
Oct  6 14:58:09 cecco-desktop kernel: [    0.622600] pci 0000:00:19.0: reg 14 32bit mmio: [0xfe9fd000-0xfe9fdfff]
Oct  6 14:58:09 cecco-desktop kernel: [    0.622606] pci 0000:00:19.0: reg 18 io port: [0xb080-0xb09f]
Oct  6 14:58:09 cecco-desktop kernel: [    0.622633] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
Oct  6 14:58:09 cecco-desktop kernel: [    0.622637] pci 0000:00:19.0: PME# disabled
Oct  6 14:58:09 cecco-desktop kernel: [    0.622690] pci 0000:00:1a.0: reg 20 io port: [0xb400-0xb41f]
Oct  6 14:58:09 cecco-desktop kernel: [    0.622755] pci 0000:00:1a.1: reg 20 io port: [0xb480-0xb49f]
Oct  6 14:58:09 cecco-desktop kernel: [    0.622820] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfe9fec00-0xfe9fefff]
Oct  6 14:58:09 cecco-desktop kernel: [    0.622857] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
Oct  6 14:58:09 cecco-desktop kernel: [    0.622860] pci 0000:00:1a.7: PME# disabled
Oct  6 14:58:09 cecco-desktop kernel: [    0.622903] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfe9f8000-0xfe9fbfff]
Oct  6 14:58:09 cecco-desktop kernel: [    0.622934] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
Oct  6 14:58:09 cecco-desktop kernel: [    0.622938] pci 0000:00:1b.0: PME# disabled
Oct  6 14:58:09 cecco-desktop kernel: [    0.622992] pci 0000:00:1d.0: reg 20 io port: [0xb800-0xb81f]
Oct  6 14:58:09 cecco-desktop kernel: [    0.623057] pci 0000:00:1d.1: reg 20 io port: [0xb880-0xb89f]
Oct  6 14:58:09 cecco-desktop kernel: [    0.623121] pci 0000:00:1d.2: reg 20 io port: [0xbc00-0xbc1f]
Oct  6 14:58:09 cecco-desktop kernel: [    0.623186] pci 0000:00:1d.3: reg 20 io port: [0xc000-0xc01f]
Oct  6 14:58:09 cecco-desktop kernel: [    0.623249] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfe9ff800-0xfe9ffbff]
Oct  6 14:58:09 cecco-desktop kernel: [    0.623286] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
Oct  6 14:58:09 cecco-desktop kernel: [    0.623291] pci 0000:00:1d.7: PME# disabled
Oct  6 14:58:09 cecco-desktop kernel: [    0.623401] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
Oct  6 14:58:09 cecco-desktop kernel: [    0.623404] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
Oct  6 14:58:09 cecco-desktop kernel: [    0.623462] pci 0000:00:1f.2: reg 10 io port: [0xc880-0xc887]
Oct  6 14:58:09 cecco-desktop kernel: [    0.623468] pci 0000:00:1f.2: reg 14 io port: [0xc800-0xc803]
Oct  6 14:58:09 cecco-desktop kernel: [    0.623474] pci 0000:00:1f.2: reg 18 io port: [0xc480-0xc487]
Oct  6 14:58:09 cecco-desktop kernel: [    0.623480] pci 0000:00:1f.2: reg 1c io port: [0xc400-0xc403]
Oct  6 14:58:09 cecco-desktop kernel: [    0.623486] pci 0000:00:1f.2: reg 20 io port: [0xc080-0xc09f]
Oct  6 14:58:09 cecco-desktop kernel: [    0.623492] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfe9ff000-0xfe9ff7ff]
Oct  6 14:58:09 cecco-desktop kernel: [    0.623508] pci 0000:00:1f.2: PME# supported from D3hot
Oct  6 14:58:09 cecco-desktop kernel: [    0.623511] pci 0000:00:1f.2: PME# disabled
Oct  6 14:58:09 cecco-desktop kernel: [    0.623542] pci 0000:00:1f.3: reg 10 64bit mmio: [0xfe9ffc00-0xfe9ffcff]
Oct  6 14:58:09 cecco-desktop kernel: [    0.623558] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
Oct  6 14:58:09 cecco-desktop kernel: [    0.623600] pci 0000:02:00.0: reg 10 64bit mmio: [0xd0000000-0xdfffffff]
Oct  6 14:58:09 cecco-desktop kernel: [    0.623608] pci 0000:02:00.0: reg 18 64bit mmio: [0xfebf0000-0xfebfffff]
Oct  6 14:58:09 cecco-desktop kernel: [    0.623612] pci 0000:02:00.0: reg 20 io port: [0xe000-0xe0ff]
Oct  6 14:58:09 cecco-desktop kernel: [    0.623620] pci 0000:02:00.0: reg 30 32bit mmio: [0xfebc0000-0xfebdffff]
Oct  6 14:58:09 cecco-desktop kernel: [    0.623626] pci 0000:02:00.0: supports D1 D2
Oct  6 14:58:09 cecco-desktop kernel: [    0.623671] pci 0000:00:01.0: bridge io port: [0xe000-0xefff]
Oct  6 14:58:09 cecco-desktop kernel: [    0.623673] pci 0000:00:01.0: bridge 32bit mmio: [0xfeb00000-0xfebfffff]
Oct  6 14:58:09 cecco-desktop kernel: [    0.623677] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
Oct  6 14:58:09 cecco-desktop kernel: [    0.623708] pci 0000:01:00.0: reg 10 io port: [0xd800-0xd8ff]
Oct  6 14:58:09 cecco-desktop kernel: [    0.623714] pci 0000:01:00.0: reg 14 32bit mmio: [0xfeafec00-0xfeafecff]
Oct  6 14:58:09 cecco-desktop kernel: [    0.623745] pci 0000:01:00.0: supports D1 D2
Oct  6 14:58:09 cecco-desktop kernel: [    0.623746] pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold
Oct  6 14:58:09 cecco-desktop kernel: [    0.623750] pci 0000:01:00.0: PME# disabled
Oct  6 14:58:09 cecco-desktop kernel: [    0.623785] pci 0000:01:05.0: reg 10 32bit mmio: [0xfeaff000-0xfeafffff]
Oct  6 14:58:09 cecco-desktop kernel: [    0.623820] pci 0000:01:05.0: supports D1 D2
Oct  6 14:58:09 cecco-desktop kernel: [    0.623822] pci 0000:01:05.0: PME# supported from D0 D1 D2 D3hot
Oct  6 14:58:09 cecco-desktop kernel: [    0.623825] pci 0000:01:05.0: PME# disabled
Oct  6 14:58:09 cecco-desktop kernel: [    0.623862] pci 0000:00:1e.0: transparent bridge
Oct  6 14:58:09 cecco-desktop kernel: [    0.623865] pci 0000:00:1e.0: bridge io port: [0xd000-0xdfff]
Oct  6 14:58:09 cecco-desktop kernel: [    0.623869] pci 0000:00:1e.0: bridge 32bit mmio: [0xfea00000-0xfeafffff]
Oct  6 14:58:09 cecco-desktop kernel: [    0.623882] bus 00 -> node 0
Oct  6 14:58:09 cecco-desktop kernel: [    0.623887] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Oct  6 14:58:09 cecco-desktop kernel: [    0.624087] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
Oct  6 14:58:09 cecco-desktop kernel: [    0.635247] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
Oct  6 14:58:09 cecco-desktop kernel: [    0.635357] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 6 7 10 11 12 14 15)
Oct  6 14:58:09 cecco-desktop kernel: [    0.635465] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
Oct  6 14:58:09 cecco-desktop kernel: [    0.635572] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
Oct  6 14:58:09 cecco-desktop kernel: [    0.635679] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *7 10 11 12 14 15)
Oct  6 14:58:09 cecco-desktop kernel: [    0.635787] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15)
Oct  6 14:58:09 cecco-desktop kernel: [    0.635894] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 *14 15)
Oct  6 14:58:09 cecco-desktop kernel: [    0.636010] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 *15)
Oct  6 14:58:09 cecco-desktop kernel: [    0.636840] ACPI: WMI: Mapper loaded
Oct  6 14:58:09 cecco-desktop kernel: [    0.636879] SCSI subsystem initialized
Oct  6 14:58:09 cecco-desktop kernel: [    0.636879] libata version 3.00 loaded.
Oct  6 14:58:09 cecco-desktop kernel: [    0.636879] usbcore: registered new interface driver usbfs
Oct  6 14:58:09 cecco-desktop kernel: [    0.636879] usbcore: registered new interface driver hub
Oct  6 14:58:09 cecco-desktop kernel: [    0.636879] usbcore: registered new device driver usb
Oct  6 14:58:09 cecco-desktop kernel: [    0.636879] PCI: Using ACPI for IRQ routing
Oct  6 14:58:09 cecco-desktop kernel: [    0.652012] Bluetooth: Core ver 2.13
Oct  6 14:58:09 cecco-desktop kernel: [    0.652028] NET: Registered protocol family 31
Oct  6 14:58:09 cecco-desktop kernel: [    0.652028] Bluetooth: HCI device and connection manager initialized
Oct  6 14:58:09 cecco-desktop kernel: [    0.652028] Bluetooth: HCI socket layer initialized
Oct  6 14:58:09 cecco-desktop kernel: [    0.652028] NET: Registered protocol family 8
Oct  6 14:58:09 cecco-desktop kernel: [    0.652028] NET: Registered protocol family 20
Oct  6 14:58:09 cecco-desktop kernel: [    0.652040] NetLabel: Initializing
Oct  6 14:58:09 cecco-desktop kernel: [    0.652041] NetLabel:  domain hash size = 128
Oct  6 14:58:09 cecco-desktop kernel: [    0.652043] NetLabel:  protocols = UNLABELED CIPSOv4
Oct  6 14:58:09 cecco-desktop kernel: [    0.652057] NetLabel:  unlabeled traffic allowed by default
Oct  6 14:58:09 cecco-desktop kernel: [    0.652102] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
Oct  6 14:58:09 cecco-desktop kernel: [    0.652106] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Oct  6 14:58:09 cecco-desktop kernel: [    0.656077] AppArmor: AppArmor Filesystem Enabled
Oct  6 14:58:09 cecco-desktop kernel: [    0.660009] Switched to high resolution mode on CPU 0
Oct  6 14:58:09 cecco-desktop kernel: [    0.660634] Switched to high resolution mode on CPU 1
Oct  6 14:58:09 cecco-desktop kernel: [    0.660897] Switched to high resolution mode on CPU 2
Oct  6 14:58:09 cecco-desktop kernel: [    0.661024] Switched to high resolution mode on CPU 3
Oct  6 14:58:09 cecco-desktop kernel: [    0.668033] pnp: PnP ACPI init
Oct  6 14:58:09 cecco-desktop kernel: [    0.668042] ACPI: bus type pnp registered
Oct  6 14:58:09 cecco-desktop kernel: [    0.670209] pnp: PnP ACPI: found 16 devices
Oct  6 14:58:09 cecco-desktop kernel: [    0.670211] ACPI: ACPI bus type pnp unregistered
Oct  6 14:58:09 cecco-desktop kernel: [    0.670218] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
Oct  6 14:58:09 cecco-desktop kernel: [    0.670224] system 00:06: ioport range 0x4d0-0x4d1 has been reserved
Oct  6 14:58:09 cecco-desktop kernel: [    0.670226] system 00:06: ioport range 0x800-0x87f has been reserved
Oct  6 14:58:09 cecco-desktop kernel: [    0.670228] system 00:06: ioport range 0x480-0x4bf has been reserved
Oct  6 14:58:09 cecco-desktop kernel: [    0.670230] system 00:06: iomem range 0xfed1c000-0xfed1ffff has been reserved
Oct  6 14:58:09 cecco-desktop kernel: [    0.670232] system 00:06: iomem range 0xfed20000-0xfed8ffff has been reserved
Oct  6 14:58:09 cecco-desktop kernel: [    0.670236] system 00:08: iomem range 0xfec00000-0xfec00fff has been reserved
Oct  6 14:58:09 cecco-desktop kernel: [    0.670238] system 00:08: iomem range 0xfee00000-0xfee00fff has been reserved
Oct  6 14:58:09 cecco-desktop kernel: [    0.670242] system 00:0b: ioport range 0xa00-0xadf has been reserved
Oct  6 14:58:09 cecco-desktop kernel: [    0.670246] system 00:0d: iomem range 0xffc00000-0xffefffff has been reserved
Oct  6 14:58:09 cecco-desktop kernel: [    0.670250] system 00:0e: iomem range 0xe0000000-0xefffffff has been reserved
Oct  6 14:58:09 cecco-desktop kernel: [    0.670255] system 00:0f: iomem range 0x0-0x9ffff could not be reserved
Oct  6 14:58:09 cecco-desktop kernel: [    0.670256] system 00:0f: iomem range 0xc0000-0xcffff has been reserved
Oct  6 14:58:09 cecco-desktop kernel: [    0.670258] system 00:0f: iomem range 0xe0000-0xfffff could not be reserved
Oct  6 14:58:09 cecco-desktop kernel: [    0.670260] system 00:0f: iomem range 0x100000-0xcfffffff could not be reserved
Oct  6 14:58:09 cecco-desktop kernel: [    0.674891] pci 0000:00:01.0: PCI bridge, secondary bus 0000:02
Oct  6 14:58:09 cecco-desktop kernel: [    0.674893] pci 0000:00:01.0:   IO window: 0xe000-0xefff
Oct  6 14:58:09 cecco-desktop kernel: [    0.674896] pci 0000:00:01.0:   MEM window: 0xfeb00000-0xfebfffff
Oct  6 14:58:09 cecco-desktop kernel: [    0.674899] pci 0000:00:01.0:   PREFETCH window: 0x000000d0000000-0x000000dfffffff
Oct  6 14:58:09 cecco-desktop kernel: [    0.674902] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01
Oct  6 14:58:09 cecco-desktop kernel: [    0.674905] pci 0000:00:1e.0:   IO window: 0xd000-0xdfff
Oct  6 14:58:09 cecco-desktop kernel: [    0.674909] pci 0000:00:1e.0:   MEM window: 0xfea00000-0xfeafffff
Oct  6 14:58:09 cecco-desktop kernel: [    0.674913] pci 0000:00:1e.0:   PREFETCH window: disabled
Oct  6 14:58:09 cecco-desktop kernel: [    0.674925] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Oct  6 14:58:09 cecco-desktop kernel: [    0.674928] pci 0000:00:01.0: setting latency timer to 64
Oct  6 14:58:09 cecco-desktop kernel: [    0.674934] pci 0000:00:1e.0: setting latency timer to 64
Oct  6 14:58:09 cecco-desktop kernel: [    0.674937] bus: 00 index 0 io port: [0x00-0xffff]
Oct  6 14:58:09 cecco-desktop kernel: [    0.674938] bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff]
Oct  6 14:58:09 cecco-desktop kernel: [    0.674940] bus: 02 index 0 io port: [0xe000-0xefff]
Oct  6 14:58:09 cecco-desktop kernel: [    0.674941] bus: 02 index 1 mmio: [0xfeb00000-0xfebfffff]
Oct  6 14:58:09 cecco-desktop kernel: [    0.674943] bus: 02 index 2 mmio: [0xd0000000-0xdfffffff]
Oct  6 14:58:09 cecco-desktop kernel: [    0.674944] bus: 02 index 3 mmio: [0x0-0x0]
Oct  6 14:58:09 cecco-desktop kernel: [    0.674945] bus: 01 index 0 io port: [0xd000-0xdfff]
Oct  6 14:58:09 cecco-desktop kernel: [    0.674947] bus: 01 index 1 mmio: [0xfea00000-0xfeafffff]
Oct  6 14:58:09 cecco-desktop kernel: [    0.674948] bus: 01 index 2 mmio: [0x0-0x0]
Oct  6 14:58:09 cecco-desktop kernel: [    0.674949] bus: 01 index 3 io port: [0x00-0xffff]
Oct  6 14:58:09 cecco-desktop kernel: [    0.674951] bus: 01 index 4 mmio: [0x000000-0xffffffffffffffff]
Oct  6 14:58:09 cecco-desktop kernel: [    0.674958] NET: Registered protocol family 2
Oct  6 14:58:09 cecco-desktop kernel: [    0.708085] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
Oct  6 14:58:09 cecco-desktop kernel: [    0.708503] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
Oct  6 14:58:09 cecco-desktop kernel: [    0.710709] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
Oct  6 14:58:09 cecco-desktop kernel: [    0.711512] TCP: Hash tables configured (established 262144 bind 65536)
Oct  6 14:58:09 cecco-desktop kernel: [    0.711514] TCP reno registered
Oct  6 14:58:09 cecco-desktop kernel: [    0.720162] NET: Registered protocol family 1
Oct  6 14:58:09 cecco-desktop kernel: [    0.720263] checking if image is initramfs... it is
Oct  6 14:58:09 cecco-desktop kernel: [    1.275633] Freeing initrd memory: 7708k freed
Oct  6 14:58:09 cecco-desktop kernel: [    1.278870] audit: initializing netlink socket (disabled)
Oct  6 14:58:09 cecco-desktop kernel: [    1.278887] type=2000 audit(1254841071.276:1): initialized
Oct  6 14:58:09 cecco-desktop kernel: [    1.285862] HugeTLB registered 2 MB page size, pre-allocated 0 pages
Oct  6 14:58:09 cecco-desktop kernel: [    1.286928] VFS: Disk quotas dquot_6.5.1
Oct  6 14:58:09 cecco-desktop kernel: [    1.286985] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Oct  6 14:58:09 cecco-desktop kernel: [    1.287435] fuse init (API version 7.10)
Oct  6 14:58:09 cecco-desktop kernel: [    1.287524] msgmni has been set to 7798
Oct  6 14:58:09 cecco-desktop kernel: [    1.287744] alg: No test for stdrng (krng)
Oct  6 14:58:09 cecco-desktop kernel: [    1.287758] io scheduler noop registered
Oct  6 14:58:09 cecco-desktop kernel: [    1.287761] io scheduler anticipatory registered
Oct  6 14:58:09 cecco-desktop kernel: [    1.287767] io scheduler deadline registered
Oct  6 14:58:09 cecco-desktop kernel: [    1.287812] io scheduler cfq registered (default)
Oct  6 14:58:09 cecco-desktop kernel: [    1.287957] pci 0000:02:00.0: Boot video device
Oct  6 14:58:09 cecco-desktop kernel: [    1.289608] pcieport-driver 0000:00:01.0: setting latency timer to 64
Oct  6 14:58:09 cecco-desktop kernel: [    1.289633] pcieport-driver 0000:00:01.0: found MSI capability
Oct  6 14:58:09 cecco-desktop kernel: [    1.289650] pcieport-driver 0000:00:01.0: irq 2303 for MSI/MSI-X
Oct  6 14:58:09 cecco-desktop kernel: [    1.289657] pci_express 0000:00:01.0:pcie00: allocate port service
Oct  6 14:58:09 cecco-desktop kernel: [    1.289667] pci_express 0000:00:01.0:pcie03: allocate port service
Oct  6 14:58:09 cecco-desktop kernel: [    1.289708] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Oct  6 14:58:09 cecco-desktop kernel: [    1.289714] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
Oct  6 14:58:09 cecco-desktop kernel: [    1.289819] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
Oct  6 14:58:09 cecco-desktop kernel: [    1.289821] ACPI: Power Button (FF) [PWRF]
Oct  6 14:58:09 cecco-desktop kernel: [    1.289858] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
Oct  6 14:58:09 cecco-desktop kernel: [    1.289860] ACPI: Power Button (CM) [PWRB]
Oct  6 14:58:09 cecco-desktop kernel: [    1.290313] ACPI: SSDT CFFC0270, 01D2 (r1 HPQOEM SLIC-CPC        1 INTL 20051117)
Oct  6 14:58:09 cecco-desktop kernel: [    1.290551] processor ACPI_CPU:00: registered as cooling_device0
Oct  6 14:58:09 cecco-desktop kernel: [    1.290814] ACPI: SSDT CFFC0450, 0143 (r1 HPQOEM SLIC-CPC        1 INTL 20051117)
Oct  6 14:58:09 cecco-desktop kernel: [    1.291035] processor ACPI_CPU:01: registered as cooling_device1
Oct  6 14:58:09 cecco-desktop kernel: [    1.291299] ACPI: SSDT CFFC05A0, 0143 (r1 HPQOEM SLIC-CPC        1 INTL 20051117)
Oct  6 14:58:09 cecco-desktop kernel: [    1.291515] processor ACPI_CPU:02: registered as cooling_device2
Oct  6 14:58:09 cecco-desktop kernel: [    1.291781] ACPI: SSDT CFFC06F0, 0143 (r1 HPQOEM SLIC-CPC        1 INTL 20051117)
Oct  6 14:58:09 cecco-desktop kernel: [    1.291994] processor ACPI_CPU:03: registered as cooling_device3
Oct  6 14:58:09 cecco-desktop kernel: [    1.321722] Linux agpgart interface v0.103
Oct  6 14:58:09 cecco-desktop kernel: [    1.321729] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
Oct  6 14:58:09 cecco-desktop kernel: [    1.322527] brd: module loaded
Oct  6 14:58:09 cecco-desktop kernel: [    1.322765] loop: module loaded
Oct  6 14:58:09 cecco-desktop kernel: [    1.322812] Fixed MDIO Bus: probed
Oct  6 14:58:09 cecco-desktop kernel: [    1.322816] PPP generic driver version 2.4.2
Oct  6 14:58:09 cecco-desktop kernel: [    1.322858] input: Macintosh mouse button emulation as /devices/virtual/input/input2
Oct  6 14:58:09 cecco-desktop kernel: [    1.322877] Driver 'sd' needs updating - please use bus_type methods
Oct  6 14:58:09 cecco-desktop kernel: [    1.322884] Driver 'sr' needs updating - please use bus_type methods
Oct  6 14:58:09 cecco-desktop kernel: [    1.322915] ahci 0000:00:1f.2: version 3.0
Oct  6 14:58:09 cecco-desktop kernel: [    1.322927] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
Oct  6 14:58:09 cecco-desktop kernel: [    1.322963] ahci 0000:00:1f.2: irq 2302 for MSI/MSI-X
Oct  6 14:58:09 cecco-desktop kernel: [    1.323045] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
Oct  6 14:58:09 cecco-desktop kernel: [    1.323048] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems 
Oct  6 14:58:09 cecco-desktop kernel: [    1.323052] ahci 0000:00:1f.2: setting latency timer to 64
Oct  6 14:58:09 cecco-desktop kernel: [    1.323374] scsi0 : ahci
Oct  6 14:58:09 cecco-desktop kernel: [    1.323477] scsi1 : ahci
Oct  6 14:58:09 cecco-desktop kernel: [    1.323546] scsi2 : ahci
Oct  6 14:58:09 cecco-desktop kernel: [    1.323611] scsi3 : ahci
Oct  6 14:58:09 cecco-desktop kernel: [    1.323701] scsi4 : ahci
Oct  6 14:58:09 cecco-desktop kernel: [    1.323770] scsi5 : ahci
Oct  6 14:58:09 cecco-desktop kernel: [    1.323906] ata1: SATA max UDMA/133 abar m2048@0xfe9ff000 port 0xfe9ff100 irq 2302
Oct  6 14:58:09 cecco-desktop kernel: [    1.323910] ata2: SATA max UDMA/133 abar m2048@0xfe9ff000 port 0xfe9ff180 irq 2302
Oct  6 14:58:09 cecco-desktop kernel: [    1.323913] ata3: SATA max UDMA/133 abar m2048@0xfe9ff000 port 0xfe9ff200 irq 2302
Oct  6 14:58:09 cecco-desktop kernel: [    1.323916] ata4: SATA max UDMA/133 abar m2048@0xfe9ff000 port 0xfe9ff280 irq 2302
Oct  6 14:58:09 cecco-desktop kernel: [    1.323919] ata5: SATA max UDMA/133 abar m2048@0xfe9ff000 port 0xfe9ff300 irq 2302
Oct  6 14:58:09 cecco-desktop kernel: [    1.323922] ata6: SATA max UDMA/133 abar m2048@0xfe9ff000 port 0xfe9ff380 irq 2302
Oct  6 14:58:09 cecco-desktop kernel: [    1.640029] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Oct  6 14:58:09 cecco-desktop kernel: [    1.657432] ata1.00: ATA-7: Hitachi HDT725032VLA380, V54OA7BA, max UDMA/133
Oct  6 14:58:09 cecco-desktop kernel: [    1.657435] ata1.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32)
Oct  6 14:58:09 cecco-desktop kernel: [    1.658199] ata1.00: configured for UDMA/133
Oct  6 14:58:09 cecco-desktop kernel: [    1.992028] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Oct  6 14:58:09 cecco-desktop kernel: [    2.004749] ata2.00: ATAPI: ATAPI   DVD A  DH16A3L, 8H1B, max UDMA/100
Oct  6 14:58:09 cecco-desktop kernel: [    2.018186] ata2.00: configured for UDMA/100
Oct  6 14:58:09 cecco-desktop kernel: [    2.352027] ata3: SATA link down (SStatus 0 SControl 300)
Oct  6 14:58:09 cecco-desktop kernel: [    2.688026] ata4: SATA link down (SStatus 0 SControl 300)
Oct  6 14:58:09 cecco-desktop kernel: [    3.024026] ata5: SATA link down (SStatus 0 SControl 300)
Oct  6 14:58:09 cecco-desktop kernel: [    3.360026] ata6: SATA link down (SStatus 0 SControl 300)
Oct  6 14:58:09 cecco-desktop kernel: [    3.376123] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HDT72503 V54O PQ: 0 ANSI: 5
Oct  6 14:58:09 cecco-desktop kernel: [    3.376205] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
Oct  6 14:58:09 cecco-desktop kernel: [    3.376219] sd 0:0:0:0: [sda] Write Protect is off
Oct  6 14:58:09 cecco-desktop kernel: [    3.376220] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Oct  6 14:58:09 cecco-desktop kernel: [    3.376240] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Oct  6 14:58:09 cecco-desktop kernel: [    3.376290] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
Oct  6 14:58:09 cecco-desktop kernel: [    3.376301] sd 0:0:0:0: [sda] Write Protect is off
Oct  6 14:58:09 cecco-desktop kernel: [    3.376303] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Oct  6 14:58:09 cecco-desktop kernel: [    3.376322] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Oct  6 14:58:09 cecco-desktop kernel: [    3.376324]  sda: sda1 sda2 sda3 sda4
Oct  6 14:58:09 cecco-desktop kernel: [    3.423506] sd 0:0:0:0: [sda] Attached SCSI disk
Oct  6 14:58:09 cecco-desktop kernel: [    3.423539] sd 0:0:0:0: Attached scsi generic sg0 type 0
Oct  6 14:58:09 cecco-desktop kernel: [    3.424727] scsi 1:0:0:0: CD-ROM            ATAPI    DVD A  DH16A3L   8H1B PQ: 0 ANSI: 5
Oct  6 14:58:09 cecco-desktop kernel: [    3.430899] sr0: scsi3-mmc drive: 40x/12x writer dvd-ram cd/rw xa/form2 cdda tray
Oct  6 14:58:09 cecco-desktop kernel: [    3.430903] Uniform CD-ROM driver Revision: 3.20
Oct  6 14:58:09 cecco-desktop kernel: [    3.430997] sr 1:0:0:0: Attached scsi CD-ROM sr0
Oct  6 14:58:09 cecco-desktop kernel: [    3.431039] sr 1:0:0:0: Attached scsi generic sg1 type 5
Oct  6 14:58:09 cecco-desktop kernel: [    3.431473] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Oct  6 14:58:09 cecco-desktop kernel: [    3.431490] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Oct  6 14:58:09 cecco-desktop kernel: [    3.431502] ehci_hcd 0000:00:1a.7: setting latency timer to 64
Oct  6 14:58:09 cecco-desktop kernel: [    3.431505] ehci_hcd 0000:00:1a.7: EHCI Host Controller
Oct  6 14:58:09 cecco-desktop kernel: [    3.431553] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
Oct  6 14:58:09 cecco-desktop kernel: [    3.435473] ehci_hcd 0000:00:1a.7: debug port 1
Oct  6 14:58:09 cecco-desktop kernel: [    3.435478] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
Oct  6 14:58:09 cecco-desktop kernel: [    3.435489] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfe9fec00
Oct  6 14:58:09 cecco-desktop kernel: [    3.448015] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
Oct  6 14:58:09 cecco-desktop kernel: [    3.448081] usb usb1: configuration #1 chosen from 1 choice
Oct  6 14:58:09 cecco-desktop kernel: [    3.448110] hub 1-0:1.0: USB hub found
Oct  6 14:58:09 cecco-desktop kernel: [    3.448117] hub 1-0:1.0: 4 ports detected
Oct  6 14:58:09 cecco-desktop kernel: [    3.448202] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
Oct  6 14:58:09 cecco-desktop kernel: [    3.448209] ehci_hcd 0000:00:1d.7: setting latency timer to 64
Oct  6 14:58:09 cecco-desktop kernel: [    3.448212] ehci_hcd 0000:00:1d.7: EHCI Host Controller
Oct  6 14:58:09 cecco-desktop kernel: [    3.448243] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
Oct  6 14:58:09 cecco-desktop kernel: [    3.452132] ehci_hcd 0000:00:1d.7: debug port 1
Oct  6 14:58:09 cecco-desktop kernel: [    3.452137] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
Oct  6 14:58:09 cecco-desktop kernel: [    3.452149] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe9ff800
Oct  6 14:58:09 cecco-desktop kernel: [    3.464014] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
Oct  6 14:58:09 cecco-desktop kernel: [    3.464072] usb usb2: configuration #1 chosen from 1 choice
Oct  6 14:58:09 cecco-desktop kernel: [    3.464098] hub 2-0:1.0: USB hub found
Oct  6 14:58:09 cecco-desktop kernel: [    3.464104] hub 2-0:1.0: 8 ports detected
Oct  6 14:58:09 cecco-desktop kernel: [    3.464188] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Oct  6 14:58:09 cecco-desktop kernel: [    3.464198] uhci_hcd: USB Universal Host Controller Interface driver
Oct  6 14:58:09 cecco-desktop kernel: [    3.464219] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Oct  6 14:58:09 cecco-desktop kernel: [    3.464224] uhci_hcd 0000:00:1a.0: setting latency timer to 64
Oct  6 14:58:09 cecco-desktop kernel: [    3.464226] uhci_hcd 0000:00:1a.0: UHCI Host Controller
Oct  6 14:58:09 cecco-desktop kernel: [    3.464255] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
Oct  6 14:58:09 cecco-desktop kernel: [    3.464282] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b400
Oct  6 14:58:09 cecco-desktop kernel: [    3.464342] usb usb3: configuration #1 chosen from 1 choice
Oct  6 14:58:09 cecco-desktop kernel: [    3.464359] hub 3-0:1.0: USB hub found
Oct  6 14:58:09 cecco-desktop kernel: [    3.464363] hub 3-0:1.0: 2 ports detected
Oct  6 14:58:09 cecco-desktop kernel: [    3.464425] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
Oct  6 14:58:09 cecco-desktop kernel: [    3.464430] uhci_hcd 0000:00:1a.1: setting latency timer to 64
Oct  6 14:58:09 cecco-desktop kernel: [    3.464432] uhci_hcd 0000:00:1a.1: UHCI Host Controller
Oct  6 14:58:09 cecco-desktop kernel: [    3.464462] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
Oct  6 14:58:09 cecco-desktop kernel: [    3.464488] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b480
Oct  6 14:58:09 cecco-desktop kernel: [    3.464544] usb usb4: configuration #1 chosen from 1 choice
Oct  6 14:58:09 cecco-desktop kernel: [    3.464561] hub 4-0:1.0: USB hub found
Oct  6 14:58:09 cecco-desktop kernel: [    3.464565] hub 4-0:1.0: 2 ports detected
Oct  6 14:58:09 cecco-desktop kernel: [    3.464626] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
Oct  6 14:58:09 cecco-desktop kernel: [    3.464631] uhci_hcd 0000:00:1d.0: setting latency timer to 64
Oct  6 14:58:09 cecco-desktop kernel: [    3.464633] uhci_hcd 0000:00:1d.0: UHCI Host Controller
Oct  6 14:58:09 cecco-desktop kernel: [    3.464662] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
Oct  6 14:58:09 cecco-desktop kernel: [    3.464683] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b800
Oct  6 14:58:09 cecco-desktop kernel: [    3.464741] usb usb5: configuration #1 chosen from 1 choice
Oct  6 14:58:09 cecco-desktop kernel: [    3.464758] hub 5-0:1.0: USB hub found
Oct  6 14:58:09 cecco-desktop kernel: [    3.464764] hub 5-0:1.0: 2 ports detected
Oct  6 14:58:09 cecco-desktop kernel: [    3.464823] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
Oct  6 14:58:09 cecco-desktop kernel: [    3.464828] uhci_hcd 0000:00:1d.1: setting latency timer to 64
Oct  6 14:58:09 cecco-desktop kernel: [    3.464830] uhci_hcd 0000:00:1d.1: UHCI Host Controller
Oct  6 14:58:09 cecco-desktop kernel: [    3.464867] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
Oct  6 14:58:09 cecco-desktop kernel: [    3.464895] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b880
Oct  6 14:58:09 cecco-desktop kernel: [    3.464946] usb usb6: configuration #1 chosen from 1 choice
Oct  6 14:58:09 cecco-desktop kernel: [    3.464964] hub 6-0:1.0: USB hub found
Oct  6 14:58:09 cecco-desktop kernel: [    3.464969] hub 6-0:1.0: 2 ports detected
Oct  6 14:58:09 cecco-desktop kernel: [    3.465029] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Oct  6 14:58:09 cecco-desktop kernel: [    3.465034] uhci_hcd 0000:00:1d.2: setting latency timer to 64
Oct  6 14:58:09 cecco-desktop kernel: [    3.465037] uhci_hcd 0000:00:1d.2: UHCI Host Controller
Oct  6 14:58:09 cecco-desktop kernel: [    3.465067] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
Oct  6 14:58:09 cecco-desktop kernel: [    3.465087] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000bc00
Oct  6 14:58:09 cecco-desktop kernel: [    3.465141] usb usb7: configuration #1 chosen from 1 choice
Oct  6 14:58:09 cecco-desktop kernel: [    3.465158] hub 7-0:1.0: USB hub found
Oct  6 14:58:09 cecco-desktop kernel: [    3.465162] hub 7-0:1.0: 2 ports detected
Oct  6 14:58:09 cecco-desktop kernel: [    3.465222] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
Oct  6 14:58:09 cecco-desktop kernel: [    3.465226] uhci_hcd 0000:00:1d.3: setting latency timer to 64
Oct  6 14:58:09 cecco-desktop kernel: [    3.465229] uhci_hcd 0000:00:1d.3: UHCI Host Controller
Oct  6 14:58:09 cecco-desktop kernel: [    3.465258] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
Oct  6 14:58:09 cecco-desktop kernel: [    3.465278] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000c000
Oct  6 14:58:09 cecco-desktop kernel: [    3.465331] usb usb8: configuration #1 chosen from 1 choice
Oct  6 14:58:09 cecco-desktop kernel: [    3.465347] hub 8-0:1.0: USB hub found
Oct  6 14:58:09 cecco-desktop kernel: [    3.465353] hub 8-0:1.0: 2 ports detected
Oct  6 14:58:09 cecco-desktop kernel: [    3.465454] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
Oct  6 14:58:09 cecco-desktop kernel: [    3.467561] serio: i8042 KBD port at 0x60,0x64 irq 1
Oct  6 14:58:09 cecco-desktop kernel: [    3.467566] serio: i8042 AUX port at 0x60,0x64 irq 12
Oct  6 14:58:09 cecco-desktop kernel: [    3.476572] mice: PS/2 mouse device common for all mice
Oct  6 14:58:09 cecco-desktop kernel: [    3.512598] rtc_cmos 00:03: RTC can wake from S4
Oct  6 14:58:09 cecco-desktop kernel: [    3.512642] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
Oct  6 14:58:09 cecco-desktop kernel: [    3.512684] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
Oct  6 14:58:09 cecco-desktop kernel: [    3.512732] device-mapper: uevent: version 1.0.3
Oct  6 14:58:09 cecco-desktop kernel: [    3.512836] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
Oct  6 14:58:09 cecco-desktop kernel: [    3.513000] device-mapper: multipath: version 1.0.5 loaded
Oct  6 14:58:09 cecco-desktop kernel: [    3.513002] device-mapper: multipath round-robin: version 1.0.0 loaded
Oct  6 14:58:09 cecco-desktop kernel: [    3.513196] cpuidle: using governor ladder
Oct  6 14:58:09 cecco-desktop kernel: [    3.513198] cpuidle: using governor menu
Oct  6 14:58:09 cecco-desktop kernel: [    3.513552] TCP cubic registered
Oct  6 14:58:09 cecco-desktop kernel: [    3.513606] NET: Registered protocol family 10
Oct  6 14:58:09 cecco-desktop kernel: [    3.513916] lo: Disabled Privacy Extensions
Oct  6 14:58:09 cecco-desktop kernel: [    3.514128] NET: Registered protocol family 17
Oct  6 14:58:09 cecco-desktop kernel: [    3.514144] Bluetooth: L2CAP ver 2.11
Oct  6 14:58:09 cecco-desktop kernel: [    3.514145] Bluetooth: L2CAP socket layer initialized
Oct  6 14:58:09 cecco-desktop kernel: [    3.514147] Bluetooth: SCO (Voice Link) ver 0.6
Oct  6 14:58:09 cecco-desktop kernel: [    3.514148] Bluetooth: SCO socket layer initialized
Oct  6 14:58:09 cecco-desktop kernel: [    3.514195] Bluetooth: RFCOMM socket layer initialized
Oct  6 14:58:09 cecco-desktop kernel: [    3.514203] Bluetooth: RFCOMM TTY layer initialized
Oct  6 14:58:09 cecco-desktop kernel: [    3.514205] Bluetooth: RFCOMM ver 1.10
Oct  6 14:58:09 cecco-desktop kernel: [    3.515162] registered taskstats version 1
Oct  6 14:58:09 cecco-desktop kernel: [    3.515247]   Magic number: 13:401:990
Oct  6 14:58:09 cecco-desktop kernel: [    3.515330] rtc_cmos 00:03: setting system clock to 2009-10-06 14:57:54 UTC (1254841074)
Oct  6 14:58:09 cecco-desktop kernel: [    3.515332] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
Oct  6 14:58:09 cecco-desktop kernel: [    3.515334] EDD information not available.
Oct  6 14:58:09 cecco-desktop kernel: [    3.515366] Freeing unused kernel memory: 536k freed
Oct  6 14:58:09 cecco-desktop kernel: [    3.515511] Write protecting the kernel read-only data: 6688k
Oct  6 14:58:09 cecco-desktop kernel: [    3.541653] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
Oct  6 14:58:09 cecco-desktop kernel: [    3.655627] e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k6
Oct  6 14:58:09 cecco-desktop kernel: [    3.655630] e1000e: Copyright (c) 1999-2008 Intel Corporation.
Oct  6 14:58:09 cecco-desktop kernel: [    3.655687] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
Oct  6 14:58:09 cecco-desktop kernel: [    3.655695] e1000e 0000:00:19.0: setting latency timer to 64
Oct  6 14:58:09 cecco-desktop kernel: [    3.655820] e1000e 0000:00:19.0: irq 2301 for MSI/MSI-X
Oct  6 14:58:09 cecco-desktop kernel: [    3.675642] 8139too Fast Ethernet driver 0.9.28
Oct  6 14:58:09 cecco-desktop kernel: [    3.675686] 8139too 0000:01:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
Oct  6 14:58:09 cecco-desktop kernel: [    3.676769] eth0: RealTek RTL8139 at 0xd800, 00:1b:11:52:4a:05, IRQ 17
Oct  6 14:58:09 cecco-desktop kernel: [    3.676770] eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
Oct  6 14:58:09 cecco-desktop kernel: [    3.685035] ohci1394 0000:01:05.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
Oct  6 14:58:09 cecco-desktop kernel: [    3.736749] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[20]  MMIO=[feaff000-feaff7ff]  Max Packet=[1024]  IR/IT contexts=[8/8]
Oct  6 14:58:09 cecco-desktop kernel: [    3.777518] usb 2-5: new high speed USB device using ehci_hcd and address 2
Oct  6 14:58:09 cecco-desktop kernel: [    3.862635] 0000:00:19.0: eth1: (PCI Express:2.5GB/s:Width x1) 00:1d:60:c2:02:c3
Oct  6 14:58:09 cecco-desktop kernel: [    3.862638] 0000:00:19.0: eth1: Intel(R) PRO/1000 Network Connection
Oct  6 14:58:09 cecco-desktop kernel: [    3.862664] 0000:00:19.0: eth1: MAC: 6, PHY: 6, PBA No: ffffff-0ff
Oct  6 14:58:09 cecco-desktop kernel: [    3.910153] usb 2-5: configuration #1 chosen from 1 choice
Oct  6 14:58:09 cecco-desktop kernel: [    3.913897] Initializing USB Mass Storage driver...
Oct  6 14:58:09 cecco-desktop kernel: [    3.914047] scsi6 : SCSI emulation for USB Mass Storage devices
Oct  6 14:58:09 cecco-desktop kernel: [    3.914144] usb-storage: device found at 2
Oct  6 14:58:09 cecco-desktop kernel: [    3.914147] usb-storage: waiting for device to settle before scanning
Oct  6 14:58:09 cecco-desktop kernel: [    3.914154] usbcore: registered new interface driver usb-storage
Oct  6 14:58:09 cecco-desktop kernel: [    3.914156] USB Mass Storage support registered.
Oct  6 14:58:09 cecco-desktop kernel: [    4.169486] PM: Starting manual resume from disk
Oct  6 14:58:09 cecco-desktop kernel: [    4.169488] PM: Resume from partition 8:4
Oct  6 14:58:09 cecco-desktop kernel: [    4.169489] PM: Checking hibernation image.
Oct  6 14:58:09 cecco-desktop kernel: [    4.169603] PM: Resume from disk failed.
Oct  6 14:58:09 cecco-desktop kernel: [    4.207797] kjournald starting.  Commit interval 5 seconds
Oct  6 14:58:09 cecco-desktop kernel: [    4.207817] EXT3-fs: mounted filesystem with ordered data mode.
Oct  6 14:58:09 cecco-desktop kernel: [    5.020205] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0011d80001889df8]
Oct  6 14:58:09 cecco-desktop kernel: [    8.912170] usb-storage: device scan complete
Oct  6 14:58:09 cecco-desktop kernel: [    8.912753] scsi 6:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
Oct  6 14:58:09 cecco-desktop kernel: [    8.913377] scsi 6:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
Oct  6 14:58:09 cecco-desktop kernel: [    8.914015] scsi 6:0:0:2: Direct-Access     Generic  USB SM Reader    1.02 PQ: 0 ANSI: 0
Oct  6 14:58:09 cecco-desktop kernel: [    8.914636] scsi 6:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
Oct  6 14:58:09 cecco-desktop kernel: [    8.915680] sd 6:0:0:0: [sdb] Attached SCSI removable disk
Oct  6 14:58:09 cecco-desktop kernel: [    8.915726] sd 6:0:0:0: Attached scsi generic sg2 type 0
Oct  6 14:58:09 cecco-desktop kernel: [    8.916435] sd 6:0:0:1: [sdc] Attached SCSI removable disk
Oct  6 14:58:09 cecco-desktop kernel: [    8.916464] sd 6:0:0:1: Attached scsi generic sg3 type 0
Oct  6 14:58:09 cecco-desktop kernel: [    8.917179] sd 6:0:0:2: [sdd] Attached SCSI removable disk
Oct  6 14:58:09 cecco-desktop kernel: [    8.917243] sd 6:0:0:2: Attached scsi generic sg4 type 0
Oct  6 14:58:09 cecco-desktop kernel: [    8.917922] sd 6:0:0:3: [sde] Attached SCSI removable disk
Oct  6 14:58:09 cecco-desktop kernel: [    8.917959] sd 6:0:0:3: Attached scsi generic sg5 type 0
Oct  6 14:58:09 cecco-desktop kernel: [   13.079054] udev: starting version 141
Oct  6 14:58:09 cecco-desktop kernel: [   13.412120] udev: renamed network interface eth0 to eth1
Oct  6 14:58:09 cecco-desktop kernel: [   13.452344] udev: renamed network interface eth1_rename to eth0
Oct  6 14:58:09 cecco-desktop kernel: [   14.268096] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
Oct  6 14:58:09 cecco-desktop kernel: [   14.283248] [fglrx] Maximum main memory to use for locked dma buffers: 3738 MBytes.
Oct  6 14:58:09 cecco-desktop kernel: [   14.283309] [fglrx]   vendor: 1002 device: 94c3 count: 1
Oct  6 14:58:09 cecco-desktop kernel: [   14.283533] [fglrx] ioport: bar 4, base 0xe000, size: 0x100
Oct  6 14:58:09 cecco-desktop kernel: [   14.283543] pci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Oct  6 14:58:09 cecco-desktop kernel: [   14.283547] pci 0000:02:00.0: setting latency timer to 64
Oct  6 14:58:09 cecco-desktop kernel: [   14.285690] [fglrx] Driver built-in PAT support is enabled successfully
Oct  6 14:58:09 cecco-desktop kernel: [   14.285755] [fglrx] module loaded - fglrx 8.60.3 [Apr  1 2009] with 1 minors
Oct  6 14:58:09 cecco-desktop kernel: [   14.323270] iTCO_vendor_support: vendor-support=0
Oct  6 14:58:09 cecco-desktop kernel: [   14.335213] input: PC Speaker as /devices/platform/pcspkr/input/input4
Oct  6 14:58:09 cecco-desktop kernel: [   14.351375] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
Oct  6 14:58:09 cecco-desktop kernel: [   14.351524] iTCO_wdt: Found a ICH9R TCO device (Version=2, TCOBASE=0x0860)
Oct  6 14:58:09 cecco-desktop kernel: [   14.351600] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
Oct  6 14:58:09 cecco-desktop kernel: [   14.460503] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume
Oct  6 14:58:09 cecco-desktop kernel: [   14.536021] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
Oct  6 14:58:09 cecco-desktop kernel: [   14.536086] HDA Intel 0000:00:1b.0: setting latency timer to 64
Oct  6 14:58:09 cecco-desktop kernel: [   14.570450] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
Oct  6 14:58:09 cecco-desktop kernel: [   14.850019] lp: driver loaded but no devices found
Oct  6 14:58:09 cecco-desktop kernel: [   14.885486] coretemp coretemp.0: Using relative temperature scale!
Oct  6 14:58:09 cecco-desktop kernel: [   14.885530] coretemp coretemp.1: Using relative temperature scale!
Oct  6 14:58:09 cecco-desktop kernel: [   14.885564] coretemp coretemp.2: Using relative temperature scale!
Oct  6 14:58:09 cecco-desktop kernel: [   14.885592] coretemp coretemp.3: Using relative temperature scale!
Oct  6 14:58:09 cecco-desktop kernel: [   14.979076] Adding 2931852k swap on /dev/sda4.  Priority:-1 extents:1 across:2931852k
Oct  6 14:58:09 cecco-desktop kernel: [   15.125375] input: PS2++ Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input5
Oct  6 14:58:09 cecco-desktop kernel: [   15.509437] EXT3 FS on sda3, internal journal
Oct  6 14:58:09 cecco-desktop kernel: [   16.435185] EXT4-fs: barriers enabled
Oct  6 14:58:09 cecco-desktop kernel: [   16.435360] kjournald2 starting.  Commit interval 5 seconds
Oct  6 14:58:09 cecco-desktop kernel: [   16.435558] EXT4 FS on sda1, internal journal on sda1:8
Oct  6 14:58:09 cecco-desktop kernel: [   16.435562] EXT4-fs: delayed allocation enabled
Oct  6 14:58:09 cecco-desktop kernel: [   16.435563] EXT4-fs: file extents enabled
Oct  6 14:58:09 cecco-desktop kernel: [   16.435725] EXT4-fs: mballoc enabled
Oct  6 14:58:09 cecco-desktop kernel: [   16.435728] EXT4-fs: mounted filesystem with ordered data mode.
Oct  6 14:58:09 cecco-desktop kernel: [   17.193513] type=1505 audit(1254833888.174:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2164
Oct  6 14:58:09 cecco-desktop kernel: [   17.224303] type=1505 audit(1254833888.205:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2168
Oct  6 14:58:09 cecco-desktop kernel: [   17.224384] type=1505 audit(1254833888.205:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2168
Oct  6 14:58:09 cecco-desktop kernel: [   17.224416] type=1505 audit(1254833888.205:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2168
Oct  6 14:58:09 cecco-desktop kernel: [   17.224443] type=1505 audit(1254833888.205:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2168
Oct  6 14:58:09 cecco-desktop kernel: [   17.285701] type=1505 audit(1254833888.270:7): operation="profile_load" name="/usr/bin/freshclam" name2="default" pid=2175
Oct  6 14:58:09 cecco-desktop kernel: [   17.370533] type=1505 audit(1254833888.354:8): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2179
Oct  6 14:58:09 cecco-desktop kernel: [   17.370687] type=1505 audit(1254833888.354:9): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2179
Oct  6 14:58:09 cecco-desktop kernel: [   17.390274] type=1505 audit(1254833888.374:10): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2183
Oct  6 14:58:11 cecco-desktop kernel: [   20.633581] /dev/vmmon[2574]: Module vmmon: registered with major=10 minor=165
Oct  6 14:58:11 cecco-desktop kernel: [   20.633595] /dev/vmmon[2574]: Initial HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
Oct  6 14:58:11 cecco-desktop kernel: [   20.633607] /dev/vmmon[2574]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
Oct  6 14:58:11 cecco-desktop kernel: [   20.633609] /dev/vmmon[2574]: Module vmmon: initialized
Oct  6 14:58:11 cecco-desktop kernel: [   20.670842] /dev/vmci[2584]: VMCI: Driver initialized.
Oct  6 14:58:11 cecco-desktop kernel: [   20.670878] /dev/vmci[2584]: Module vmci: registered with major=10 minor=57
Oct  6 14:58:11 cecco-desktop kernel: [   20.670880] /dev/vmci[2584]: Module vmci: initialized
Oct  6 14:58:11 cecco-desktop kernel: [   20.793425] ppdev: user-space parallel port driver
Oct  6 14:58:12 cecco-desktop kernel: [   21.899863] /dev/vmnet: open called by PID 3158 (vmnet-dhcpd)
Oct  6 14:58:12 cecco-desktop kernel: [   21.899877] /dev/vmnet: hub 1 does not exist, allocating memory.
Oct  6 14:58:12 cecco-desktop kernel: [   21.899885] /dev/vmnet: port on hub 1 successfully opened
Oct  6 14:58:12 cecco-desktop kernel: [   21.935972] /dev/vmnet: open called by PID 3162 (vmnet-netifup)
Oct  6 14:58:12 cecco-desktop kernel: [   21.935979] /dev/vmnet: port on hub 1 successfully opened
Oct  6 14:58:12 cecco-desktop kernel: [   21.970321] /dev/vmnet: open called by PID 3168 (vmnet-dhcpd)
Oct  6 14:58:12 cecco-desktop kernel: [   21.970328] /dev/vmnet: hub 8 does not exist, allocating memory.
Oct  6 14:58:12 cecco-desktop kernel: [   21.970336] /dev/vmnet: port on hub 8 successfully opened
Oct  6 14:58:12 cecco-desktop kernel: [   22.002825] /dev/vmnet: open called by PID 3170 (vmnet-natd)
Oct  6 14:58:12 cecco-desktop kernel: [   22.002838] /dev/vmnet: port on hub 8 successfully opened
Oct  6 14:58:13 cecco-desktop kernel: [   22.034130] /dev/vmnet: open called by PID 3174 (vmnet-netifup)
Oct  6 14:58:13 cecco-desktop kernel: [   22.034138] /dev/vmnet: port on hub 8 successfully opened
Oct  6 14:58:18 cecco-desktop kernel: [   27.260523] vboxdrv: Trying to deactivate the NMI watchdog permanently...
Oct  6 14:58:18 cecco-desktop kernel: [   27.260525] vboxdrv: Successfully done.
Oct  6 14:58:18 cecco-desktop kernel: [   27.260526] vboxdrv: Found 4 processor cores.
Oct  6 14:58:18 cecco-desktop kernel: [   27.260784] VBoxDrv: dbg - g_abExecMemory=ffffffffa052ff00
Oct  6 14:58:18 cecco-desktop kernel: [   27.260843] vboxdrv: fAsync=0 offMin=0x15f offMax=0x1d13
Oct  6 14:58:18 cecco-desktop kernel: [   27.261630] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
Oct  6 14:58:18 cecco-desktop kernel: [   27.261632] vboxdrv: Successfully loaded version 3.0.6 (interface 0x000e0000).
Oct  6 14:58:18 cecco-desktop kernel: [   27.485532] VBoxNetFlt: dbg - g_abExecMemory=ffffffffa06d1820
Oct  6 14:58:18 cecco-desktop kernel: [   27.489992] VBoxNetAdp: dbg - g_abExecMemory=ffffffffa06eefc0
Oct  6 14:58:20 cecco-desktop kernel: [   29.151320] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Oct  6 14:58:20 cecco-desktop kernel: [   29.151322] Bluetooth: BNEP filters: protocol multicast
Oct  6 14:58:20 cecco-desktop kernel: [   29.161672] Bridge firewalling registered
Oct  6 14:58:22 cecco-desktop NetworkManager: <info>  starting... 
Oct  6 14:58:22 cecco-desktop NetworkManager: <info>  (eth1): new Ethernet device (driver: '8139too') 
Oct  6 14:58:22 cecco-desktop NetworkManager: <info>  (eth1): exported as /org/freedesktop/Hal/devices/net_00_1b_11_52_4a_05 
Oct  6 14:58:22 cecco-desktop NetworkManager: <info>  (eth0): new Ethernet device (driver: 'e1000e') 
Oct  6 14:58:22 cecco-desktop NetworkManager: <info>  (eth0): exported as /org/freedesktop/Hal/devices/net_00_1d_60_c2_02_c3 
Oct  6 14:58:22 cecco-desktop NetworkManager: <info>  Trying to start the supplicant... 
Oct  6 14:58:22 cecco-desktop NetworkManager: <info>  Trying to start the system settings daemon... 
Oct  6 14:58:23 cecco-desktop kernel: [   32.385003] vmnet8: no IPv6 routers present
Oct  6 14:58:23 cecco-desktop kernel: [   32.516026] vmnet1: no IPv6 routers present
Oct  6 14:58:25 cecco-desktop kernel: [   34.555927] [fglrx] Firegl kernel thread PID: 4282
Oct  6 14:58:25 cecco-desktop kernel: [   34.606644] [fglrx] Gart USWC size:1885 M.
Oct  6 14:58:25 cecco-desktop kernel: [   34.606647] [fglrx] Gart cacheable size:60 M.
Oct  6 14:58:25 cecco-desktop kernel: [   34.606651] [fglrx] Reserved FB block: Shared offset:0, size:1000000 
Oct  6 14:58:25 cecco-desktop kernel: [   34.606653] [fglrx] Reserved FB block: Unshared offset:fc23000, size:3d9000 
Oct  6 14:58:25 cecco-desktop kernel: [   34.606654] [fglrx] Reserved FB block: Unshared offset:fffc000, size:4000 
Oct  6 14:58:26 cecco-desktop NetworkManager: <info>  (eth1): device state change: 1 -> 2 
Oct  6 14:58:26 cecco-desktop NetworkManager: <info>  (eth1): bringing up device. 
Oct  6 14:58:26 cecco-desktop NetworkManager: <info>  (eth1): preparing device. 
Oct  6 14:58:26 cecco-desktop NetworkManager: <info>  (eth1): deactivating device (reason: 2). 
Oct  6 14:58:26 cecco-desktop NetworkManager: <info>  Unmanaged Device found; state CONNECTED forced. (see http://bugs.launchpad.net/bugs/191889) 
Oct  6 14:58:26 cecco-desktop NetworkManager: <info>  Unmanaged Device found; state CONNECTED forced. (see http://bugs.launchpad.net/bugs/191889) 
Oct  6 14:58:26 cecco-desktop NetworkManager: <info>  (eth0): device state change: 1 -> 2 
Oct  6 14:58:26 cecco-desktop NetworkManager: <info>  (eth0): bringing up device. 
Oct  6 14:58:26 cecco-desktop kernel: [   35.016579] eth1: link down
Oct  6 14:58:26 cecco-desktop kernel: [   35.016781] /dev/vmnet: open called by PID 2648 (vmnet-bridge)
Oct  6 14:58:26 cecco-desktop kernel: [   35.016795] /dev/vmnet: hub 2 does not exist, allocating memory.
Oct  6 14:58:26 cecco-desktop kernel: [   35.016803] /dev/vmnet: port on hub 2 successfully opened
Oct  6 14:58:26 cecco-desktop kernel: [   35.016821] bridge-eth1: up
Oct  6 14:58:26 cecco-desktop kernel: [   35.017179] ADDRCONF(NETDEV_UP): eth1: link is not ready
Oct  6 14:58:26 cecco-desktop kernel: [   35.017447] bridge-eth1: attached
Oct  6 14:58:26 cecco-desktop kernel: [   35.152200] e1000e 0000:00:19.0: irq 2301 for MSI/MSI-X
Oct  6 14:58:26 cecco-desktop kernel: [   35.208066] e1000e 0000:00:19.0: irq 2301 for MSI/MSI-X
Oct  6 14:58:26 cecco-desktop kernel: [   35.208214] /dev/vmnet: open called by PID 2639 (vmnet-bridge)
Oct  6 14:58:26 cecco-desktop kernel: [   35.208222] /dev/vmnet: hub 0 does not exist, allocating memory.
Oct  6 14:58:26 cecco-desktop kernel: [   35.208231] /dev/vmnet: port on hub 0 successfully opened
Oct  6 14:58:26 cecco-desktop kernel: [   35.208245] bridge-eth0: up
Oct  6 14:58:26 cecco-desktop NetworkManager: <info>  (eth0): preparing device. 
Oct  6 14:58:26 cecco-desktop NetworkManager: <info>  (eth0): deactivating device (reason: 2). 
Oct  6 14:58:26 cecco-desktop kernel: [   35.209065] ADDRCONF(NETDEV_UP): eth0: link is not ready
Oct  6 14:58:26 cecco-desktop kernel: [   35.221094] bridge-eth1: disabling the bridge
Oct  6 14:58:26 cecco-desktop kernel: [   35.232519] bridge-eth1: down
Oct  6 14:58:26 cecco-desktop kernel: [   35.232577] bridge-eth1: detached
Oct  6 14:58:26 cecco-desktop kernel: [   35.232598] bridge-eth0: attached
Oct  6 14:58:28 cecco-desktop kernel: [   37.768875] 0000:00:19.0: eth0: Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
Oct  6 14:58:28 cecco-desktop kernel: [   37.769478] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Oct  6 14:58:28 cecco-desktop kernel: [   37.769549] bridge-eth0: disabling the bridge
Oct  6 14:58:28 cecco-desktop NetworkManager: <info>  (eth0): carrier now ON (device state 2) 
Oct  6 14:58:28 cecco-desktop NetworkManager: <info>  (eth0): device state change: 2 -> 3 
Oct  6 14:58:28 cecco-desktop kernel: [   37.784031] bridge-eth0: down
Oct  6 14:58:39 cecco-desktop kernel: [   48.448015] eth0: no IPv6 routers present
Oct  6 15:00:48 cecco-desktop NetworkManager: <info>  Activation (eth0) starting connection 'ufficio' 
Oct  6 15:00:48 cecco-desktop NetworkManager: <info>  (eth0): device state change: 3 -> 4 
Oct  6 15:00:48 cecco-desktop NetworkManager: <info>  Activation (eth0) Stage 1 of 5 (Device Prepare) scheduled... 
Oct  6 15:00:48 cecco-desktop NetworkManager: <info>  Activation (eth0) Stage 1 of 5 (Device Prepare) started... 
Oct  6 15:00:48 cecco-desktop NetworkManager: <info>  Activation (eth0) Stage 2 of 5 (Device Configure) scheduled... 
Oct  6 15:00:48 cecco-desktop NetworkManager: <info>  Activation (eth0) Stage 1 of 5 (Device Prepare) complete. 
Oct  6 15:00:48 cecco-desktop NetworkManager: <info>  Activation (eth0) Stage 2 of 5 (Device Configure) starting... 
Oct  6 15:00:48 cecco-desktop NetworkManager: <info>  (eth0): device state change: 4 -> 5 
Oct  6 15:00:48 cecco-desktop NetworkManager: <info>  Activation (eth0) Stage 2 of 5 (Device Configure) successful. 
Oct  6 15:00:48 cecco-desktop NetworkManager: <info>  Activation (eth0) Stage 3 of 5 (IP Configure Start) scheduled. 
Oct  6 15:00:48 cecco-desktop NetworkManager: <info>  Activation (eth0) Stage 2 of 5 (Device Configure) complete. 
Oct  6 15:00:48 cecco-desktop NetworkManager: <info>  Activation (eth0) Stage 3 of 5 (IP Configure Start) started... 
Oct  6 15:00:48 cecco-desktop NetworkManager: <info>  (eth0): device state change: 5 -> 7 
Oct  6 15:00:48 cecco-desktop NetworkManager: <info>  Activation (eth0) Stage 4 of 5 (IP Configure Get) scheduled... 
Oct  6 15:00:48 cecco-desktop NetworkManager: <info>  Activation (eth0) Stage 3 of 5 (IP Configure Start) complete. 
Oct  6 15:00:48 cecco-desktop NetworkManager: <info>  Activation (eth0) Stage 4 of 5 (IP Configure Get) started... 
Oct  6 15:00:48 cecco-desktop NetworkManager: <info>  Activation (eth0) Stage 5 of 5 (IP Configure Commit) scheduled... 
Oct  6 15:00:48 cecco-desktop NetworkManager: <info>  Activation (eth0) Stage 4 of 5 (IP Configure Get) complete. 
Oct  6 15:00:48 cecco-desktop NetworkManager: <info>  Activation (eth0) Stage 5 of 5 (IP Configure Commit) started... 
Oct  6 15:00:49 cecco-desktop NetworkManager: <info>  (eth0): device state change: 7 -> 8 
Oct  6 15:00:49 cecco-desktop NetworkManager: <info>  Policy set 'ufficio' (eth0) as default for routing and DNS. 
Oct  6 15:00:49 cecco-desktop NetworkManager: <info>  Activation (eth0) successful, device activated. 
Oct  6 15:00:49 cecco-desktop NetworkManager: <info>  Activation (eth0) Stage 5 of 5 (IP Configure Commit) complete. 
Oct  6 15:48:42 cecco-desktop kernel: [ 3051.484590] gvfsd-trash[4920]: segfault at 28 ip 0000000000410114 sp 00007fff605f71d0 error 4 in gvfsd-trash[400000+23000]
Oct  6 15:51:12 cecco-desktop kernel: [ 3201.634929] /dev/vmmon[8456]: PTSC: initialized at 2399994000 Hz using TSC
Oct  6 15:51:14 cecco-desktop kernel: [ 3203.656914] /dev/vmnet: open called by PID 8461 (vmware-vmx)
Oct  6 15:51:14 cecco-desktop kernel: [ 3203.656931] /dev/vmnet: port on hub 8 successfully opened
Oct  6 15:51:19 cecco-desktop kernel: [ 3208.145659] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 15:51:23 cecco-desktop kernel: [ 3212.035420] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 15:51:25 cecco-desktop kernel: [ 3214.059656] /dev/vmnet: open called by PID 8461 (vmware-vmx)
Oct  6 15:51:25 cecco-desktop kernel: [ 3214.059669] /dev/vmnet: port on hub 8 successfully opened
Oct  6 15:51:38 cecco-desktop kernel: [ 3227.787832] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 15:51:39 cecco-desktop kernel: [ 3228.788192] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 15:51:42 cecco-desktop kernel: [ 3231.899031] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 15:51:43 cecco-desktop kernel: [ 3232.899682] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 15:51:54 cecco-desktop kernel: [ 3243.903598] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 15:51:54 cecco-desktop kernel: [ 3243.923586] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 15:51:55 cecco-desktop kernel: [ 3244.928046] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 15:51:56 cecco-desktop kernel: [ 3245.932080] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 15:52:02 cecco-desktop kernel: [ 3251.972062] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 15:52:03 cecco-desktop kernel: [ 3252.972228] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 15:52:05 cecco-desktop kernel: [ 3254.977112] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 15:52:06 cecco-desktop kernel: [ 3255.977627] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 15:56:53 cecco-desktop kernel: [ 3542.576486] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 16:02:55 cecco-desktop kernel: [ 3904.418274] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 16:03:06 cecco-desktop kernel: [ 3915.424563] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 16:03:17 cecco-desktop kernel: [ 3926.429274] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 16:03:21 cecco-desktop kernel: [ 3930.453641] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 16:43:33 cecco-desktop kernel: [ 6342.994243] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 16:43:34 cecco-desktop kernel: [ 6343.995102] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 16:43:35 cecco-desktop kernel: [ 6344.997218] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 16:43:36 cecco-desktop kernel: [ 6345.997854] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 16:43:37 cecco-desktop kernel: [ 6346.998659] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 16:43:48 cecco-desktop kernel: [ 6358.011294] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 16:44:11 cecco-desktop kernel: [ 6380.061738] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 16:44:43 cecco-desktop kernel: [ 6412.085072] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 16:48:34 cecco-desktop kernel: [ 6643.994111] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 16:48:35 cecco-desktop kernel: [ 6644.995391] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 16:48:36 cecco-desktop kernel: [ 6645.996483] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 16:48:39 cecco-desktop kernel: [ 6648.001329] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 16:48:39 cecco-desktop kernel: [ 6649.003530] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 16:52:50 cecco-desktop kernel: [ 6899.031864] npviewer.bin[10801]: segfault at ff99cd48 ip 00000000ff99cd48 sp 00000000ffc5f7bc error 14
Oct  6 17:09:10 cecco-desktop kernel: [ 7879.290200] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 17:09:13 cecco-desktop kernel: [ 7882.293082] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 17:09:14 cecco-desktop kernel: [ 7883.295047] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 17:09:15 cecco-desktop kernel: [ 7884.295256] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 17:09:18 cecco-desktop kernel: [ 7887.301568] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 17:09:28 cecco-desktop kernel: [ 7896.931582] nm-connection-e[11779]: segfault at 20 ip 00007fe951951550 sp 00007fff5c16e820 error 4 in libpolkit-gnome.so.0.0.0[7fe95194d000+a000]
Oct  6 17:09:41 cecco-desktop kernel: [ 7910.605481] nm-connection-e[11813]: segfault at 20 ip 00007fa018c40550 sp 00007fff2345e280 error 4 in libpolkit-gnome.so.0.0.0[7fa018c3c000+a000]
Oct  6 17:09:52 cecco-desktop kernel: [ 7921.937513] nm-connection-e[11821]: segfault at 20 ip 00007fc6ce1f1550 sp 00007fffd8a0d810 error 4 in libpolkit-gnome.so.0.0.0[7fc6ce1ed000+a000]
Oct  6 17:15:00 cecco-desktop kernel: [ 8229.047089] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 17:15:01 cecco-desktop kernel: [ 8230.055628] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 17:15:06 cecco-desktop kernel: [ 8235.076077] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 17:23:33 cecco-desktop kernel: [ 8742.699458] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 17:23:34 cecco-desktop kernel: [ 8743.701097] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 17:26:06 cecco-desktop kernel: [ 8895.842600] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 17:26:17 cecco-desktop kernel: [ 8906.855905] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 17:26:23 cecco-desktop kernel: [ 8912.862108] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 17:26:50 cecco-desktop kernel: [ 8939.879143] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 17:26:51 cecco-desktop kernel: [ 8940.880061] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 17:27:04 cecco-desktop kernel: [ 8953.894911] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 17:27:05 cecco-desktop kernel: [ 8954.895192] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 17:29:48 cecco-desktop kernel: [ 9117.508552] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 17:29:49 cecco-desktop kernel: [ 9118.512351] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 17:30:00 cecco-desktop kernel: [ 9129.503733] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 17:30:00 cecco-desktop kernel: [ 9129.547797] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 17:30:01 cecco-desktop kernel: [ 9130.549054] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 17:30:14 cecco-desktop kernel: [ 9143.640521] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 17:30:15 cecco-desktop kernel: [ 9144.641822] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 17:30:19 cecco-desktop kernel: [ 9148.643856] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 17:30:30 cecco-desktop kernel: [ 9159.645610] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 17:30:37 cecco-desktop kernel: [ 9166.821559] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 17:30:48 cecco-desktop kernel: [ 9177.826351] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 17:30:55 cecco-desktop kernel: [ 9184.876300] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 17:31:06 cecco-desktop kernel: [ 9195.870051] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 17:31:06 cecco-desktop kernel: [ 9195.906123] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 17:31:07 cecco-desktop kernel: [ 9196.907377] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 17:31:11 cecco-desktop kernel: [ 9200.908823] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 17:31:16 cecco-desktop kernel: [ 9205.915215] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 17:31:27 cecco-desktop kernel: [ 9216.915626] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 17:31:27 cecco-desktop kernel: [ 9216.923738] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 17:31:28 cecco-desktop kernel: [ 9217.924554] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 17:31:29 cecco-desktop kernel: [ 9218.925452] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 17:31:36 cecco-desktop kernel: [ 9225.931072] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 17:31:47 cecco-desktop kernel: [ 9236.925577] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 17:31:47 cecco-desktop kernel: [ 9236.945074] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 17:31:52 cecco-desktop kernel: [ 9241.952123] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 17:32:03 cecco-desktop kernel: [ 9252.954186] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 17:32:03 cecco-desktop kernel: [ 9252.977131] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 17:32:06 cecco-desktop kernel: [ 9255.986089] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 17:32:07 cecco-desktop kernel: [ 9256.987141] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 17:32:10 cecco-desktop kernel: [ 9259.996501] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 17:32:11 cecco-desktop kernel: [ 9261.000220] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 17:32:12 cecco-desktop kernel: [ 9262.005205] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 17:32:23 cecco-desktop kernel: [ 9273.005208] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 17:32:35 cecco-desktop kernel: [ 9284.038841] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 17:32:36 cecco-desktop kernel: [ 9285.040322] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 17:32:42 cecco-desktop kernel: [ 9291.057315] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 17:37:12 cecco-desktop kernel: [ 9561.256396] nm-connection-e[13005]: segfault at 20 ip 00007fa153060550 sp 00007fff5d87e1d0 error 4 in libpolkit-gnome.so.0.0.0[7fa15305c000+a000]
Oct  6 17:37:31 cecco-desktop kernel: [ 9580.132735] nm-connection-e[13006]: segfault at 20 ip 00007f8d5abe5550 sp 00007fff65402d50 error 4 in libpolkit-gnome.so.0.0.0[7f8d5abe1000+a000]
Oct  6 17:39:38 cecco-desktop kernel: [ 9707.140140] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 17:40:35 cecco-desktop kernel: [ 9764.898337] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 17:40:36 cecco-desktop kernel: [ 9765.899003] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 17:40:37 cecco-desktop kernel: [ 9766.899097] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 17:40:50 cecco-desktop kernel: [ 9779.029433] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 17:41:06 cecco-desktop kernel: [ 9789.368392] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 17:41:18 cecco-desktop kernel: [ 9807.672574] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 17:41:29 cecco-desktop kernel: [ 9818.676409] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 17:42:20 cecco-desktop kernel: [ 9869.758630] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 17:42:21 cecco-desktop kernel: [ 9870.759680] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 17:43:00 cecco-desktop kernel: [ 9909.136097] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 17:43:20 cecco-desktop kernel: [ 9929.093057] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 17:43:22 cecco-desktop kernel: [ 9931.097406] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 17:43:33 cecco-desktop kernel: [ 9942.100098] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 17:43:34 cecco-desktop kernel: [ 9943.117257] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 17:43:35 cecco-desktop kernel: [ 9944.118615] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 17:43:37 cecco-desktop kernel: [ 9946.157358] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 17:43:44 cecco-desktop kernel: [ 9953.213734] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 17:43:45 cecco-desktop kernel: [ 9954.214261] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 17:43:46 cecco-desktop kernel: [ 9955.215002] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 17:43:48 cecco-desktop kernel: [ 9957.215878] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 17:43:59 cecco-desktop kernel: [ 9968.218114] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 17:44:00 cecco-desktop kernel: [ 9969.239126] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 17:44:17 cecco-desktop kernel: [ 9986.272585] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 17:44:19 cecco-desktop kernel: [ 9988.279614] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 17:44:22 cecco-desktop kernel: [ 9991.289569] /dev/vmmon[8461]: /dev/rtc open failed: -13
Oct  6 17:45:09 cecco-desktop kernel: [10038.828210] vmmon: Had to deallocate locked 128702 pages from vm driver ffff880078cd4400
Oct  6 17:45:09 cecco-desktop kernel: [10038.831890] vmmon: Had to deallocate AWE 5236 pages from vm driver ffff880078cd4400
Oct  6 17:47:11 cecco-desktop kernel: [10149.979497] nm-connection-e[13977]: segfault at 20 ip 00007fa2aa5ae550 sp 00007fffb4dcabf0 error 4 in libpolkit-gnome.so.0.0.0[7fa2aa5aa000+a000]