[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.35-22-generic (buildd@allspice) (gcc version 4.4.5 (Ubuntu/Linaro 4.4.4-14ubuntu4) ) #33-Ubuntu SMP Sun Sep 19 20:32:27 UTC 2010 (Ubuntu 2.6.35-22.33-generic 2.6.35.4) [ 0.000000] Command line: noprompt cdrom-detect/try-usb=true file=/cdrom/preseed/ubuntu.seed boot=casper persistent initrd=/casper/initrd.lz splash -- BOOT_IMAGE=/casper/vmlinuz [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e000 (usable) [ 0.000000] BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000c7f50000 (usable) [ 0.000000] BIOS-e820: 00000000c7f50000 - 00000000c7f65000 (ACPI data) [ 0.000000] BIOS-e820: 00000000c7f65000 - 00000000c7f66000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000c7f66000 - 00000000d0000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI present. [ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x130000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-D3FFF write-protect [ 0.000000] D4000-E3FFF uncachable [ 0.000000] E4000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FF80000000 write-back [ 0.000000] 1 base 0080000000 mask FFC0000000 write-back [ 0.000000] 2 base 00C0000000 mask FFF8000000 write-back [ 0.000000] 3 base 0100000000 mask FFE0000000 write-back [ 0.000000] 4 base 0120000000 mask FFF0000000 write-back [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000130000000 aka 4864M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000c8000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xc7f50 max_arch_pfn = 0x400000000 [ 0.000000] e820 update range: 0000000000001000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009e000 (usable) [ 0.000000] modified: 000000000009e000 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000d2000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000c7f50000 (usable) [ 0.000000] modified: 00000000c7f50000 - 00000000c7f65000 (ACPI data) [ 0.000000] modified: 00000000c7f65000 - 00000000c7f66000 (ACPI NVS) [ 0.000000] modified: 00000000c7f66000 - 00000000d0000000 (reserved) [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000130000000 (usable) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] found SMP MP-table at [ffff8800000f8220] f8220 [ 0.000000] init_memory_mapping: 0000000000000000-00000000c7f50000 [ 0.000000] 0000000000 - 00c7e00000 page 2M [ 0.000000] 00c7e00000 - 00c7f50000 page 4k [ 0.000000] kernel direct mapping tables up to c7f50000 @ 16000-1c000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000130000000 [ 0.000000] 0100000000 - 0130000000 page 2M [ 0.000000] kernel direct mapping tables up to 130000000 @ 1a000-20000 [ 0.000000] RAMDISK: 7f48e000 - 7ffff000 [ 0.000000] ACPI: RSDP 00000000000f8250 00024 (v02 PTLTD ) [ 0.000000] ACPI: XSDT 00000000c7f5c0d3 0006C (v01 HPQOEM SLIC-MPC 06040000 LTP 00000000) [ 0.000000] ACPI: FACP 00000000c7f64992 000F4 (v03 NVIDIA MCP67-M 06040000 PTL_ 000F4240) [ 0.000000] ACPI: DSDT 00000000c7f5c13f 087DF (v01 NVIDIA MCP67 06040000 MSFT 03000000) [ 0.000000] ACPI: FACS 00000000c7f65fc0 00040 [ 0.000000] ACPI: TCPA 00000000c7f64a86 00032 (v01 Phoeni x 06040000 TL 00000000) [ 0.000000] ACPI: SRAT 00000000c7f64ab8 000C8 (v01 AMD HAMMER 06040000 AMD 00000001) [ 0.000000] ACPI: SSDT 00000000c7f64b80 00206 (v01 PTLTD POWERNOW 06040000 LTP 00000001) [ 0.000000] ACPI: MCFG 00000000c7f64d86 0003C (v01 PTLTD MCFG 06040000 LTP 00000000) [ 0.000000] ACPI: HPET 00000000c7f64dc2 00038 (v01 PTLTD HPETTBL 06040000 LTP 00000001) [ 0.000000] ACPI: APIC 00000000c7f64dfa 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000) [ 0.000000] ACPI: BOOT 00000000c7f64e62 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) [ 0.000000] ACPI: SLIC 00000000c7f64e8a 00176 (v01 HPQOEM SLIC-MPC 06040000 LTP 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0 [ 0.000000] SRAT: Node 0 PXM 0 0-a0000 [ 0.000000] SRAT: Node 0 PXM 0 100000-d0000000 [ 0.000000] SRAT: Node 0 PXM 0 100000000-130000000 [ 0.000000] SRAT: Node 0 [0,a0000) + [100000,d0000000) -> [0,d0000000) [ 0.000000] SRAT: Node 0 [0,d0000000) + [100000000,130000000) -> [0,130000000) [ 0.000000] NUMA: Using 63 for the hash shift. [ 0.000000] Initmem setup node 0 0000000000000000-0000000130000000 [ 0.000000] NODE_DATA [0000000100000000 - 0000000100004fff] [ 0.000000] [ffffea0000000000-ffffea00043fffff] PMD -> [ffff880100200000-ffff8801039fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00130000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009e [ 0.000000] 0: 0x00000100 -> 0x000c7f50 [ 0.000000] 0: 0x00100000 -> 0x00130000 [ 0.000000] On node 0 totalpages: 1015518 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3926 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 800648 pages, LIFO batch:31 [ 0.000000] Normal zone: 2688 pages used for memmap [ 0.000000] Normal zone: 193920 pages, LIFO batch:31 [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] early_res array is doubled to 64 at [1b000 - 1b7ff] [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000 [ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000c7f50000 - 00000000c7f65000 [ 0.000000] PM: Registered nosave memory: 00000000c7f65000 - 00000000c7f66000 [ 0.000000] PM: Registered nosave memory: 00000000c7f66000 - 00000000d0000000 [ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000 [ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000fff80000 [ 0.000000] PM: Registered nosave memory: 00000000fff80000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:10000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880001e00000 s91520 r8192 d23168 u1048576 [ 0.000000] pcpu-alloc: s91520 r8192 d23168 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 998494 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: noprompt cdrom-detect/try-usb=true file=/cdrom/preseed/ubuntu.seed boot=casper persistent initrd=/casper/initrd.lz splash -- BOOT_IMAGE=/casper/vmlinuz [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ fb0e000000 size 32 MB [ 0.000000] Aperture beyond 4GB. Ignoring. [ 0.000000] Your BIOS doesn't leave a aperture memory hole [ 0.000000] Please enable the IOMMU option in the BIOS setup [ 0.000000] This costs you 64 MB of RAM [ 0.000000] Mapping aperture over 65536 KB of RAM @ 20000000 [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000024000000 [ 0.000000] early_res array is doubled to 128 at [1b800 - 1c7ff] [ 0.000000] Subtract (58 early reservations) [ 0.000000] #1 [0001000000 - 0001d17114] TEXT DATA BSS [ 0.000000] #2 [007f48e000 - 007ffff000] RAMDISK [ 0.000000] #3 [0001d18000 - 0001d1818c] BRK [ 0.000000] #4 [00000f8230 - 0000100000] BIOS reserved [ 0.000000] #5 [00000f8220 - 00000f8230] MP-table mpf [ 0.000000] #6 [000009e000 - 000009e571] BIOS reserved [ 0.000000] #7 [000009e69d - 00000f8220] BIOS reserved [ 0.000000] #8 [000009e571 - 000009e69d] MP-table mpc [ 0.000000] #9 [0000010000 - 0000012000] TRAMPOLINE [ 0.000000] #10 [0000012000 - 0000016000] ACPI WAKEUP [ 0.000000] #11 [0000016000 - 000001a000] PGTABLE [ 0.000000] #12 [000001a000 - 000001b000] PGTABLE [ 0.000000] #13 [0100000000 - 0100005000] NODE_DATA [ 0.000000] #14 [0001d181c0 - 0001d191c0] BOOTMEM [ 0.000000] #15 [0001d17140 - 0001d17428] BOOTMEM [ 0.000000] #16 [0100005000 - 0100006000] BOOTMEM [ 0.000000] #17 [0100006000 - 0100007000] BOOTMEM [ 0.000000] #18 [0100200000 - 0103a00000] MEMMAP 0 [ 0.000000] #19 [0001d17440 - 0001d175c0] BOOTMEM [ 0.000000] #20 [0001d191c0 - 0001d311c0] BOOTMEM [ 0.000000] #21 [0001d311c0 - 0001d371c0] BOOTMEM [ 0.000000] #22 [0001d38000 - 0001d39000] BOOTMEM [ 0.000000] #23 [0001d175c0 - 0001d17601] BOOTMEM [ 0.000000] #24 [0001d17640 - 0001d17683] BOOTMEM [ 0.000000] #25 [0001d176c0 - 0001d17998] BOOTMEM [ 0.000000] #26 [0001d179c0 - 0001d17a28] BOOTMEM [ 0.000000] #27 [0001d17a40 - 0001d17aa8] BOOTMEM [ 0.000000] #28 [0001d17ac0 - 0001d17b28] BOOTMEM [ 0.000000] #29 [0001d17b40 - 0001d17ba8] BOOTMEM [ 0.000000] #30 [0001d17bc0 - 0001d17c28] BOOTMEM [ 0.000000] #31 [0001d17c40 - 0001d17ca8] BOOTMEM [ 0.000000] #32 [0001d17cc0 - 0001d17d28] BOOTMEM [ 0.000000] #33 [0001d17d40 - 0001d17da8] BOOTMEM [ 0.000000] #34 [0001d17dc0 - 0001d17e28] BOOTMEM [ 0.000000] #35 [0001d17e40 - 0001d17ea8] BOOTMEM [ 0.000000] #36 [0001d17ec0 - 0001d17f28] BOOTMEM [ 0.000000] #37 [0001d17f40 - 0001d17fa8] BOOTMEM [ 0.000000] #38 [0001d17fc0 - 0001d17fe0] BOOTMEM [ 0.000000] #39 [0001d371c0 - 0001d371e0] BOOTMEM [ 0.000000] #40 [0001d37200 - 0001d37299] BOOTMEM [ 0.000000] #41 [0001d372c0 - 0001d37359] BOOTMEM [ 0.000000] #42 [0001e00000 - 0001e1e000] BOOTMEM [ 0.000000] #43 [0001f00000 - 0001f1e000] BOOTMEM [ 0.000000] #44 [0001d37380 - 0001d37388] BOOTMEM [ 0.000000] #45 [0001d373c0 - 0001d373c8] BOOTMEM [ 0.000000] #46 [0001d37400 - 0001d37408] BOOTMEM [ 0.000000] #47 [0001d37440 - 0001d37450] BOOTMEM [ 0.000000] #48 [0001d37480 - 0001d375c0] BOOTMEM [ 0.000000] #49 [0001d375c0 - 0001d37620] BOOTMEM [ 0.000000] #50 [0001d37640 - 0001d376a0] BOOTMEM [ 0.000000] #51 [0001d39000 - 0001d41000] BOOTMEM [ 0.000000] #52 [0020000000 - 0024000000] BOOTMEM [ 0.000000] #53 [0001d376c0 - 0001d376e0] BOOTMEM [ 0.000000] #54 [0001f1e000 - 0005f1e000] BOOTMEM [ 0.000000] #55 [0001d41000 - 0001d61000] BOOTMEM [ 0.000000] #56 [0001d61000 - 0001da1000] BOOTMEM [ 0.000000] #57 [000001c800 - 0000024800] BOOTMEM [ 0.000000] Memory: 3847636k/4980736k available (5708k kernel code, 918664k absent, 214436k reserved, 5382k data, 908k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] Verbose stalled-CPUs detection is disabled. [ 0.000000] NR_IRQS:4352 nr_irqs:512 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 40632320 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1900.445 MHz processor. [ 0.010010] Calibrating delay loop (skipped), value calculated using timer frequency.. 3800.89 BogoMIPS (lpj=19004450) [ 0.010135] pid_max: default: 32768 minimum: 301 [ 0.010222] Security Framework initialized [ 0.010302] AppArmor: AppArmor initialized [ 0.010362] Yama: becoming mindful. [ 0.010990] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.013937] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.015376] Mount-cache hash table entries: 256 [ 0.015601] Initializing cgroup subsys ns [ 0.015664] Initializing cgroup subsys cpuacct [ 0.015728] Initializing cgroup subsys memory [ 0.015797] Initializing cgroup subsys devices [ 0.015860] Initializing cgroup subsys freezer [ 0.015921] Initializing cgroup subsys net_cls [ 0.016010] tseg: 00c7f80000 [ 0.016013] CPU: Physical Processor ID: 0 [ 0.016073] CPU: Processor Core ID: 0 [ 0.016134] mce: CPU supports 5 MCE banks [ 0.016204] using C1E aware idle routine [ 0.016265] Performance Events: AMD PMU driver. [ 0.020068] ... version: 0 [ 0.020128] ... bit width: 48 [ 0.020188] ... generic registers: 4 [ 0.020249] ... value mask: 0000ffffffffffff [ 0.020311] ... max period: 00007fffffffffff [ 0.020372] ... fixed-purpose events: 0 [ 0.020432] ... event mask: 000000000000000f [ 0.022278] ACPI: Core revision 20100428 [ 0.040010] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.040078] ftrace: allocating 22680 entries in 89 pages [ 0.050100] Setting APIC routing to flat [ 0.050636] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.155601] CPU0: AMD Turion(tm) 64 X2 Mobile Technology TL-58 stepping 01 [ 0.160000] Booting Node 0, Processors #1 Ok. [ 0.020000] System has AMD C1E enabled [ 0.310093] Brought up 2 CPUs [ 0.310096] Total of 2 processors activated (7601.27 BogoMIPS). [ 0.310092] Switch to broadcast mode on CPU1 [ 0.310559] Switch to broadcast mode on CPU0 [ 0.310559] devtmpfs: initialized [ 0.311041] regulator: core version 0.5 [ 0.311142] Time: 20:00:11 Date: 12/12/10 [ 0.311251] NET: Registered protocol family 16 [ 0.311343] Trying to unpack rootfs image as initramfs... [ 0.311476] node 0 link 0: io port [1000, fffff] [ 0.311480] TOM: 00000000d0000000 aka 3328M [ 0.311544] node 0 link 0: mmio [a0000, bffff] [ 0.311548] node 0 link 0: mmio [d0000000, dfffffff] [ 0.311551] node 0 link 0: mmio [e0000000, efffffff] [ 0.311554] node 0 link 0: mmio [f0000000, fe0bffff] [ 0.311557] TOM2: 0000000130000000 aka 4864M [ 0.311618] bus: [00, ff] on node 0 link 0 [ 0.311622] bus: 00 index 0 [io 0x0000-0xffff] [ 0.311624] bus: 00 index 1 [mem 0x000a0000-0x000bffff] [ 0.311627] bus: 00 index 2 [mem 0xd0000000-0xffffffff] [ 0.311630] bus: 00 index 3 [mem 0x130000000-0xfcffffffff] [ 0.311638] ACPI: bus type pci registered [ 0.311780] PCI: MMCONFIG for domain 0000 [bus 00-04] at [mem 0xe0000000-0xe04fffff] (base 0xe0000000) [ 0.311858] PCI: MMCONFIG at [mem 0xe0000000-0xe04fffff] reserved in E820 [ 0.312478] PCI: Using configuration type 1 for base access [ 0.330000] bio: create slab at 0 [ 0.330000] ACPI: EC: Look up EC in DSDT [ 0.330000] ACPI: BIOS _OSI(Linux) query ignored [ 0.330000] ACPI: Interpreter enabled [ 0.330000] ACPI: (supports S0 S3 S4 S5) [ 0.330000] ACPI: Using IOAPIC for interrupt routing [ 0.335018] ACPI: EC: GPE = 0x10, I/O: command/status = 0x66, data = 0x62 [ 0.335514] ACPI: No dock devices found. [ 0.335577] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.335954] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.336321] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.336325] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.336328] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.336331] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000c3fff] (ignored) [ 0.336334] pci_root PNP0A08:00: host bridge window [mem 0x000c4000-0x000c7fff] (ignored) [ 0.336337] pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000cbfff] (ignored) [ 0.336340] pci_root PNP0A08:00: host bridge window [mem 0x000cc000-0x000cffff] (ignored) [ 0.336343] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored) [ 0.336346] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored) [ 0.336349] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored) [ 0.336353] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff] (ignored) [ 0.336356] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff] (ignored) [ 0.336359] pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff] (ignored) [ 0.336362] pci_root PNP0A08:00: host bridge window [mem 0x000e8000-0x000ebfff] (ignored) [ 0.336365] pci_root PNP0A08:00: host bridge window [mem 0x000ec000-0x000effff] (ignored) [ 0.336368] pci_root PNP0A08:00: host bridge window [mem 0x000f0000-0x000fffff] (ignored) [ 0.336371] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff] (ignored) [ 0.336374] pci_root PNP0A08:00: host bridge window [mem 0xd0000000-0xfebfffff] (ignored) [ 0.336555] pci 0000:00:01.1: reg 10: [io 0x3080-0x30bf] [ 0.336566] pci 0000:00:01.1: reg 20: [io 0x3040-0x307f] [ 0.336571] pci 0000:00:01.1: reg 24: [io 0x3000-0x303f] [ 0.336591] pci 0000:00:01.1: PME# supported from D3hot D3cold [ 0.336597] pci 0000:00:01.1: PME# disabled [ 0.336657] pci 0000:00:01.3: reg 10: [mem 0xf6200000-0xf627ffff] [ 0.336737] pci 0000:00:02.0: reg 10: [mem 0xf6486000-0xf6486fff] [ 0.336761] pci 0000:00:02.0: supports D1 D2 [ 0.336763] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.336767] pci 0000:00:02.0: PME# disabled [ 0.336788] pci 0000:00:02.1: reg 10: [mem 0xf6489000-0xf64890ff] [ 0.336817] pci 0000:00:02.1: supports D1 D2 [ 0.336819] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.336823] pci 0000:00:02.1: PME# disabled [ 0.336849] pci 0000:00:04.0: reg 10: [mem 0xf6487000-0xf6487fff] [ 0.336874] pci 0000:00:04.0: supports D1 D2 [ 0.336876] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.336880] pci 0000:00:04.0: PME# disabled [ 0.336901] pci 0000:00:04.1: reg 10: [mem 0xf6489400-0xf64894ff] [ 0.336930] pci 0000:00:04.1: supports D1 D2 [ 0.336933] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.336936] pci 0000:00:04.1: PME# disabled [ 0.336971] pci 0000:00:06.0: reg 20: [io 0x30c0-0x30cf] [ 0.337008] pci 0000:00:07.0: reg 10: [mem 0xf6480000-0xf6483fff] [ 0.337037] pci 0000:00:07.0: PME# supported from D3hot D3cold [ 0.337040] pci 0000:00:07.0: PME# disabled [ 0.337105] pci 0000:00:09.0: reg 10: [io 0x30f0-0x30f7] [ 0.337110] pci 0000:00:09.0: reg 14: [io 0x30e4-0x30e7] [ 0.337114] pci 0000:00:09.0: reg 18: [io 0x30e8-0x30ef] [ 0.337118] pci 0000:00:09.0: reg 1c: [io 0x30e0-0x30e3] [ 0.337122] pci 0000:00:09.0: reg 20: [io 0x30d0-0x30df] [ 0.337126] pci 0000:00:09.0: reg 24: [mem 0xf6484000-0xf6485fff] [ 0.337172] pci 0000:00:0a.0: reg 10: [mem 0xf6488000-0xf6488fff] [ 0.337177] pci 0000:00:0a.0: reg 14: [io 0x30f8-0x30ff] [ 0.337181] pci 0000:00:0a.0: reg 18: [mem 0xf6489c00-0xf6489cff] [ 0.337185] pci 0000:00:0a.0: reg 1c: [mem 0xf6489800-0xf648980f] [ 0.337208] pci 0000:00:0a.0: supports D1 D2 [ 0.337211] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.337215] pci 0000:00:0a.0: PME# disabled [ 0.337253] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.337256] pci 0000:00:0c.0: PME# disabled [ 0.337292] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.337295] pci 0000:00:0d.0: PME# disabled [ 0.337319] pci 0000:00:12.0: reg 10: [mem 0xf5000000-0xf5ffffff] [ 0.337325] pci 0000:00:12.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.337331] pci 0000:00:12.0: reg 1c: [mem 0xf4000000-0xf4ffffff 64bit] [ 0.337336] pci 0000:00:12.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.337437] PCI: peer root bus 00 res updated from pci conf [ 0.337480] pci 0000:02:05.0: proprietary Ricoh MMC controller disabled (via firewire function) [ 0.337556] pci 0000:02:05.0: MMC cards are now supported by standard SDHCI controller [ 0.337636] pci 0000:02:05.0: reg 10: [mem 0xf6100000-0xf61007ff] [ 0.337669] pci 0000:02:05.0: supports D1 D2 [ 0.337671] pci 0000:02:05.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.337675] pci 0000:02:05.0: PME# disabled [ 0.337698] pci 0000:02:05.1: reg 10: [mem 0xf6100800-0xf61008ff] [ 0.337731] pci 0000:02:05.1: supports D1 D2 [ 0.337734] pci 0000:02:05.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.337737] pci 0000:02:05.1: PME# disabled [ 0.337760] pci 0000:02:05.2: reg 10: [mem 0xf6101000-0xf61010ff] [ 0.337793] pci 0000:02:05.2: supports D1 D2 [ 0.337795] pci 0000:02:05.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.337799] pci 0000:02:05.2: PME# disabled [ 0.337822] pci 0000:02:05.3: reg 10: [mem 0xf6101400-0xf61014ff] [ 0.337855] pci 0000:02:05.3: supports D1 D2 [ 0.337857] pci 0000:02:05.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.337861] pci 0000:02:05.3: PME# disabled [ 0.337895] pci 0000:00:08.0: PCI bridge to [bus 02-02] (subtractive decode) [ 0.337961] pci 0000:00:08.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.337964] pci 0000:00:08.0: bridge window [mem 0xf6100000-0xf61fffff] [ 0.337968] pci 0000:00:08.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.337972] pci 0000:00:08.0: bridge window [io 0x0000-0xffff] (subtractive decode) [ 0.337975] pci 0000:00:08.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.337978] pci 0000:00:08.0: bridge window [mem 0xd0000000-0xffffffff] (subtractive decode) [ 0.337981] pci 0000:00:08.0: bridge window [mem 0x130000000-0xfcffffffff] (subtractive decode) [ 0.338008] pci 0000:00:0c.0: PCI bridge to [bus 04-05] [ 0.338071] pci 0000:00:0c.0: bridge window [io 0x4000-0x4fff] [ 0.338074] pci 0000:00:0c.0: bridge window [mem 0xf2000000-0xf3ffffff] [ 0.338079] pci 0000:00:0c.0: bridge window [mem 0xf0000000-0xf1ffffff 64bit pref] [ 0.338131] pci 0000:03:00.0: reg 10: [mem 0xf6000000-0xf6003fff 64bit] [ 0.338179] pci 0000:03:00.0: supports D1 D2 [ 0.360017] pci 0000:00:0d.0: PCI bridge to [bus 03-03] [ 0.360081] pci 0000:00:0d.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.360085] pci 0000:00:0d.0: bridge window [mem 0xf6000000-0xf60fffff] [ 0.360089] pci 0000:00:0d.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.360102] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.360218] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT] [ 0.360247] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR1._PRT] [ 0.360288] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT] [ 0.404082] ACPI: PCI Interrupt Link [LNK1] (IRQs 5) *10 [ 0.404568] ACPI: PCI Interrupt Link [LNK2] (IRQs 7) *11 [ 0.405051] ACPI: PCI Interrupt Link [LNK3] (IRQs 10) *0, disabled. [ 0.405577] ACPI: PCI Interrupt Link [LNK4] (IRQs 11) *0, disabled. [ 0.406104] ACPI: PCI Interrupt Link [LK1E] (IRQs 16) *0, disabled. [ 0.406630] ACPI: PCI Interrupt Link [LK2E] (IRQs 17) *0, disabled. [ 0.407156] ACPI: PCI Interrupt Link [LK3E] (IRQs 18) *0, disabled. [ 0.407683] ACPI: PCI Interrupt Link [LK4E] (IRQs 19) *10 [ 0.408163] ACPI: PCI Interrupt Link [LSMB] (IRQs *10) [ 0.408599] ACPI: PCI Interrupt Link [LUS0] (IRQs 18) *11 [ 0.409080] ACPI: PCI Interrupt Link [LUS2] (IRQs 22) *7 [ 0.409572] ACPI: PCI Interrupt Link [LMAC] (IRQs 20) *11 [ 0.410077] ACPI: PCI Interrupt Link [LAZA] (IRQs 21) *10 [ 0.410559] ACPI: PCI Interrupt Link [LGPU] (IRQs 16) *10 [ 0.411041] ACPI: PCI Interrupt Link [LPID] (IRQs 22) *0, disabled. [ 0.411568] ACPI: PCI Interrupt Link [LSI0] (IRQs 23) *11 [ 0.412049] ACPI: PCI Interrupt Link [Z018] (IRQs 18) *5 [ 0.412536] ACPI: PCI Interrupt Link [Z019] (IRQs 22) *10 [ 0.413025] ACPI: PCI Interrupt Link [LPMU] (IRQs *11) [ 0.413280] HEST: Table is not found! [ 0.413445] vgaarb: device added: PCI:0000:00:12.0,decodes=io+mem,owns=io+mem,locks=none [ 0.413525] vgaarb: loaded [ 0.413755] SCSI subsystem initialized [ 0.420000] libata version 3.00 loaded. [ 0.420000] usbcore: registered new interface driver usbfs [ 0.420000] usbcore: registered new interface driver hub [ 0.420000] usbcore: registered new device driver usb [ 0.420000] ACPI: WMI: Mapper loaded [ 0.420000] PCI: Using ACPI for IRQ routing [ 0.420000] PCI: pci_cache_line_size set to 64 bytes [ 0.420000] reserve RAM buffer: 000000000009e000 - 000000000009ffff [ 0.420000] reserve RAM buffer: 00000000c7f50000 - 00000000c7ffffff [ 0.420000] NetLabel: Initializing [ 0.420000] NetLabel: domain hash size = 128 [ 0.420000] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.420000] NetLabel: unlabeled traffic allowed by default [ 0.420000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.420000] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 [ 0.420000] hpet0: 3 comparators, 32-bit 25.000000 MHz counter [ 3.350057] Switching to clocksource hpet [ 3.361671] AppArmor: AppArmor Filesystem Enabled [ 3.361760] pnp: PnP ACPI init [ 3.361847] ACPI: bus type pnp registered [ 3.365847] pnp: PnP ACPI: found 12 devices [ 3.365909] ACPI: ACPI bus type pnp unregistered [ 3.365985] system 00:02: [mem 0xe0000000-0xefffffff] has been reserved [ 3.366054] system 00:03: [io 0x1000-0x107f] has been reserved [ 3.366118] system 00:03: [io 0x1080-0x10ff] has been reserved [ 3.366182] system 00:03: [io 0x1400-0x147f] has been reserved [ 3.366245] system 00:03: [io 0x1480-0x14ff] has been reserved [ 3.366308] system 00:03: [io 0x1800-0x187f] has been reserved [ 3.366372] system 00:03: [io 0x1880-0x18ff] has been reserved [ 3.366439] system 00:04: [io 0x0360-0x0361] has been reserved [ 3.366502] system 00:04: [io 0x04d0-0x04d1] has been reserved [ 3.366571] system 00:0b: [mem 0xffc00000-0xffffffff] could not be reserved [ 3.366636] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved [ 3.366701] system 00:0b: [mem 0xfee00000-0xfeefffff] could not be reserved [ 3.366766] system 00:0b: [mem 0xfed00000-0xfed00fff] has been reserved [ 3.366831] system 00:0b: [mem 0xfef00000-0xfef00fff] has been reserved [ 3.373304] pci 0000:00:12.0: BAR 6: assigned [mem 0xf6280000-0xf629ffff pref] [ 3.373384] pci 0000:00:08.0: PCI bridge to [bus 02-02] [ 3.373447] pci 0000:00:08.0: bridge window [io disabled] [ 3.373511] pci 0000:00:08.0: bridge window [mem 0xf6100000-0xf61fffff] [ 3.373577] pci 0000:00:08.0: bridge window [mem pref disabled] [ 3.373642] pci 0000:00:0c.0: PCI bridge to [bus 04-05] [ 3.373705] pci 0000:00:0c.0: bridge window [io 0x4000-0x4fff] [ 3.373769] pci 0000:00:0c.0: bridge window [mem 0xf2000000-0xf3ffffff] [ 3.373834] pci 0000:00:0c.0: bridge window [mem 0xf0000000-0xf1ffffff 64bit pref] [ 3.373910] pci 0000:00:0d.0: PCI bridge to [bus 03-03] [ 3.373972] pci 0000:00:0d.0: bridge window [io disabled] [ 3.374036] pci 0000:00:0d.0: bridge window [mem 0xf6000000-0xf60fffff] [ 3.374100] pci 0000:00:0d.0: bridge window [mem pref disabled] [ 3.374173] pci 0000:00:08.0: setting latency timer to 64 [ 3.374181] pci 0000:00:0c.0: setting latency timer to 64 [ 3.374187] pci 0000:00:0d.0: setting latency timer to 64 [ 3.374192] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] [ 3.374195] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff] [ 3.374198] pci_bus 0000:00: resource 6 [mem 0xd0000000-0xffffffff] [ 3.374201] pci_bus 0000:00: resource 7 [mem 0x130000000-0xfcffffffff] [ 3.374204] pci_bus 0000:02: resource 1 [mem 0xf6100000-0xf61fffff] [ 3.374207] pci_bus 0000:02: resource 4 [io 0x0000-0xffff] [ 3.374210] pci_bus 0000:02: resource 5 [mem 0x000a0000-0x000bffff] [ 3.374213] pci_bus 0000:02: resource 6 [mem 0xd0000000-0xffffffff] [ 3.374216] pci_bus 0000:02: resource 7 [mem 0x130000000-0xfcffffffff] [ 3.374219] pci_bus 0000:04: resource 0 [io 0x4000-0x4fff] [ 3.374222] pci_bus 0000:04: resource 1 [mem 0xf2000000-0xf3ffffff] [ 3.374225] pci_bus 0000:04: resource 2 [mem 0xf0000000-0xf1ffffff 64bit pref] [ 3.374228] pci_bus 0000:03: resource 1 [mem 0xf6000000-0xf60fffff] [ 3.374277] NET: Registered protocol family 2 [ 3.374575] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 3.376918] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 3.382577] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 3.383417] TCP: Hash tables configured (established 524288 bind 65536) [ 3.383484] TCP reno registered [ 3.383567] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 3.383698] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 3.383942] NET: Registered protocol family 1 [ 3.384211] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 3.384325] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 3.384444] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 3.384570] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 3.384699] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 3.384833] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 3.384900] pci 0000:00:12.0: Boot video device [ 3.384928] PCI: CLS 64 bytes, default 64 [ 3.386232] PCI-DMA: Disabling AGP. [ 3.386416] PCI-DMA: aperture base @ 20000000 size 65536 KB [ 3.386479] PCI-DMA: using GART IOMMU. [ 3.386542] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 3.391151] Simple Boot Flag at 0x36 set to 0x1 [ 3.391461] Scanning for low memory corruption every 60 seconds [ 3.391774] audit: initializing netlink socket (disabled) [ 3.391851] type=2000 audit(1292184013.380:1): initialized [ 3.620398] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 3.624727] VFS: Disk quotas dquot_6.5.2 [ 3.624860] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 3.625621] fuse init (API version 7.14) [ 3.625784] msgmni has been set to 7643 [ 3.627963] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 3.628041] io scheduler noop registered [ 3.628101] io scheduler deadline registered [ 3.628210] io scheduler cfq registered (default) [ 3.628450] pcieport 0000:00:0c.0: setting latency timer to 64 [ 3.628471] alloc irq_desc for 40 on node 0 [ 3.628473] alloc kstat_irqs on node 0 [ 3.628483] pcieport 0000:00:0c.0: irq 40 for MSI/MSI-X [ 3.628576] pcieport 0000:00:0d.0: setting latency timer to 64 [ 3.628594] alloc irq_desc for 41 on node 0 [ 3.628596] alloc kstat_irqs on node 0 [ 3.628602] pcieport 0000:00:0d.0: irq 41 for MSI/MSI-X [ 3.628678] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 3.628764] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 3.629509] ACPI: AC Adapter [ACAD] (on-line) [ 3.629662] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 [ 3.629741] ACPI: Sleep Button [SLPB] [ 3.629849] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 [ 3.630215] ACPI: Lid Switch [LID] [ 3.630341] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 [ 3.630417] ACPI: Power Button [PWRB] [ 3.630528] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 3.630604] ACPI: Power Button [PWRF] [ 3.631025] ACPI: acpi_idle registered with cpuidle [ 3.631057] ACPI: processor limited to max C-state 1 [ 4.424441] [Firmware Bug]: Invalid critical threshold (0) [ 4.425211] thermal LNXTHERM:01: registered as thermal_zone0 [ 4.425281] ACPI: Thermal Zone [THRM] (41 C) [ 4.425432] ERST: Table is not found! [ 4.425810] Linux agpgart interface v0.103 [ 4.425878] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 4.427601] brd: module loaded [ 4.428328] loop: module loaded [ 4.440085] pata_acpi 0000:00:06.0: setting latency timer to 64 [ 4.440624] ACPI: PCI Interrupt Link [LSI0] enabled at IRQ 23 [ 4.440694] alloc irq_desc for 23 on node 0 [ 4.440697] alloc kstat_irqs on node 0 [ 4.440710] pata_acpi 0000:00:09.0: PCI INT A -> Link[LSI0] -> GSI 23 (level, low) -> IRQ 23 [ 4.440804] pata_acpi 0000:00:09.0: setting latency timer to 64 [ 4.440814] pata_acpi 0000:00:09.0: PCI INT A disabled [ 4.449025] Freeing initrd memory: 11716k freed [ 4.456339] Fixed MDIO Bus: probed [ 4.456441] PPP generic driver version 2.4.2 [ 4.456553] tun: Universal TUN/TAP device driver, 1.6 [ 4.456615] tun: (C) 1999-2004 Max Krasnyansky [ 4.456776] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.457366] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 22 [ 4.457436] alloc irq_desc for 22 on node 0 [ 4.457439] alloc kstat_irqs on node 0 [ 4.457452] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUS2] -> GSI 22 (level, low) -> IRQ 22 [ 4.457550] ehci_hcd 0000:00:02.1: setting latency timer to 64 [ 4.457554] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 4.457705] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 4.457813] ehci_hcd 0000:00:02.1: debug port 1 [ 4.457880] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported [ 4.457906] ehci_hcd 0000:00:02.1: irq 22, io mem 0xf6489000 [ 4.470161] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00 [ 4.470369] hub 1-0:1.0: USB hub found [ 4.470433] hub 1-0:1.0: 7 ports detected [ 4.471034] ACPI: PCI Interrupt Link [Z019] enabled at IRQ 22 [ 4.471100] ehci_hcd 0000:00:04.1: PCI INT B -> Link[Z019] -> GSI 22 (level, low) -> IRQ 22 [ 4.471191] ehci_hcd 0000:00:04.1: setting latency timer to 64 [ 4.471194] ehci_hcd 0000:00:04.1: EHCI Host Controller [ 4.471305] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 2 [ 4.471405] ehci_hcd 0000:00:04.1: debug port 1 [ 4.471471] ehci_hcd 0000:00:04.1: cache line size of 64 is not supported [ 4.471480] ehci_hcd 0000:00:04.1: irq 22, io mem 0xf6489400 [ 4.490039] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00 [ 4.490228] hub 2-0:1.0: USB hub found [ 4.490291] hub 2-0:1.0: 2 ports detected [ 4.490435] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 4.490943] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 18 [ 4.491008] alloc irq_desc for 18 on node 0 [ 4.491011] alloc kstat_irqs on node 0 [ 4.491021] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUS0] -> GSI 18 (level, low) -> IRQ 18 [ 4.491107] ohci_hcd 0000:00:02.0: setting latency timer to 64 [ 4.491111] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 4.491220] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3 [ 4.491324] ohci_hcd 0000:00:02.0: irq 18, io mem 0xf6486000 [ 4.552152] hub 3-0:1.0: USB hub found [ 4.552217] hub 3-0:1.0: 7 ports detected [ 4.552798] ACPI: PCI Interrupt Link [Z018] enabled at IRQ 18 [ 4.552863] ohci_hcd 0000:00:04.0: PCI INT A -> Link[Z018] -> GSI 18 (level, low) -> IRQ 18 [ 4.552948] ohci_hcd 0000:00:04.0: setting latency timer to 64 [ 4.552952] ohci_hcd 0000:00:04.0: OHCI Host Controller [ 4.553069] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 4 [ 4.553157] ohci_hcd 0000:00:04.0: irq 18, io mem 0xf6487000 [ 4.612153] hub 4-0:1.0: USB hub found [ 4.612217] hub 4-0:1.0: 2 ports detected [ 4.612361] uhci_hcd: USB Universal Host Controller Interface driver [ 4.612580] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 [ 4.635469] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 4.635536] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 4.635694] mice: PS/2 mouse device common for all mice [ 4.635932] rtc_cmos 00:07: RTC can wake from S4 [ 4.636048] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 4.636152] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs [ 4.636333] device-mapper: uevent: version 1.0.3 [ 4.636491] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com [ 4.636641] device-mapper: multipath: version 1.1.1 loaded [ 4.636706] device-mapper: multipath round-robin: version 1.0.0 loaded [ 4.636950] cpuidle: using governor ladder [ 4.637015] cpuidle: using governor menu [ 4.637416] TCP cubic registered [ 4.637642] NET: Registered protocol family 10 [ 4.638237] lo: Disabled Privacy Extensions [ 4.638583] NET: Registered protocol family 17 [ 4.638689] powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-58 (2 cpu cores) (version 2.20.00) [ 4.638821] powernow-k8: 0 : fid 0xb (1900 MHz), vid 0x12 [ 4.638884] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x13 [ 4.638946] powernow-k8: 2 : fid 0x8 (1600 MHz), vid 0x14 [ 4.639008] powernow-k8: 3 : fid 0x0 (800 MHz), vid 0x1e [ 4.639262] PM: Resume from disk failed. [ 4.639276] registered taskstats version 1 [ 4.639619] Magic number: 6:23:43 [ 4.639788] rtc_cmos 00:07: setting system clock to 2010-12-12 20:00:16 UTC (1292184016) [ 4.639864] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 4.639926] EDD information not available. [ 4.640094] Freeing unused kernel memory: 908k freed [ 4.640639] Write protecting the kernel read-only data: 10240k [ 4.640902] Freeing unused kernel memory: 416k freed [ 4.641314] Freeing unused kernel memory: 1644k freed [ 4.656513] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 4.674015] udev[117]: starting version 163 [ 4.693006] ACPI: Battery Slot [BAT0] (battery present) [ 4.790106] usb 1-4: new high speed USB device using ehci_hcd and address 2 [ 4.815296] sdhci: Secure Digital Host Controller Interface driver [ 4.815363] sdhci: Copyright(c) Pierre Ossman [ 4.851028] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 4.851565] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20 [ 4.851631] alloc irq_desc for 20 on node 0 [ 4.851634] alloc kstat_irqs on node 0 [ 4.851647] forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 20 (level, low) -> IRQ 20 [ 4.851725] forcedeth 0000:00:0a.0: setting latency timer to 64 [ 4.876104] sdhci-pci 0000:02:05.1: SDHCI controller found [1180:0822] (rev 22) [ 4.876644] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 7 [ 4.876721] sdhci-pci 0000:02:05.1: PCI INT B -> Link[LNK2] -> GSI 7 (level, low) -> IRQ 7 [ 4.877841] sdhci-pci 0000:02:05.1: Will use DMA mode even though HW doesn't fully claim to support it. [ 4.878992] Registered led device: mmc0:: [ 4.880187] acpi device:23: registered as cooling_device2 [ 4.880425] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5 [ 4.880561] ACPI: Video Device [UVGA] (multi-head: yes rom: no post: no) [ 4.884142] mmc0: SDHCI controller on PCI [0000:02:05.1] using DMA [ 4.900802] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 5 [ 4.900881] firewire_ohci 0000:02:05.0: PCI INT A -> Link[LNK1] -> GSI 5 (level, low) -> IRQ 5 [ 4.901708] [drm] Initialized drm 1.1.0 20060810 [ 4.959607] Initializing USB Mass Storage driver... [ 4.959862] scsi0 : usb-storage 1-4:1.0 [ 4.960094] usbcore: registered new interface driver usb-storage [ 4.960158] USB Mass Storage support registered. [ 5.062529] usb 2-2: new high speed USB device using ehci_hcd and address 2 [ 5.150030] firewire_ohci: Added fw-ohci device 0000:02:05.0, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x0 [ 5.381208] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:1b:24:af:9d:49 [ 5.381289] forcedeth 0000:00:0a.0: highdma pwrctl mgmt lnktim msi desc-v3 [ 5.381415] pata_amd 0000:00:06.0: version 0.4.1 [ 5.381464] pata_amd 0000:00:06.0: setting latency timer to 64 [ 5.381541] scsi1 : pata_amd [ 5.381691] scsi2 : pata_amd [ 5.382222] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x30c0 irq 14 [ 5.382289] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x30c8 irq 15 [ 5.382494] ahci 0000:00:09.0: version 3.0 [ 5.382506] ahci 0000:00:09.0: PCI INT A -> Link[LSI0] -> GSI 23 (level, low) -> IRQ 23 [ 5.382639] ahci 0000:00:09.0: controller can do NCQ, turning on CAP_NCQ [ 5.382704] ahci 0000:00:09.0: controller can't do PMP, turning off CAP_PMP [ 5.382827] ahci 0000:00:09.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl IDE mode [ 5.382904] ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pio slum part [ 5.382969] ahci 0000:00:09.0: setting latency timer to 64 [ 5.383390] scsi3 : ahci [ 5.383588] scsi4 : ahci [ 5.383767] scsi5 : ahci [ 5.383927] scsi6 : ahci [ 5.384161] ata3: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 23 [ 5.384237] ata4: SATA max UDMA/133 abar m8192@0xf6484000 port 0xf6484180 irq 23 [ 5.384312] ata5: SATA max UDMA/133 abar m8192@0xf6484000 port 0xf6484200 irq 23 [ 5.386887] ata6: SATA max UDMA/133 abar m8192@0xf6484000 port 0xf6484280 irq 23 [ 5.387585] ACPI: PCI Interrupt Link [LGPU] enabled at IRQ 16 [ 5.387651] alloc irq_desc for 16 on node 0 [ 5.387654] alloc kstat_irqs on node 0 [ 5.387666] nouveau 0000:00:12.0: PCI INT A -> Link[LGPU] -> GSI 16 (level, low) -> IRQ 16 [ 5.387743] nouveau 0000:00:12.0: setting latency timer to 64 [ 5.391991] [drm] nouveau 0000:00:12.0: Detected an NV40 generation card (0x067000a1) [ 5.394060] [drm] nouveau 0000:00:12.0: Attempting to load BIOS image from PRAMIN [ 5.436240] [drm] nouveau 0000:00:12.0: ... appears to be valid [ 5.436305] [drm] nouveau 0000:00:12.0: BIT BIOS found [ 5.436368] [drm] nouveau 0000:00:12.0: Bios version 05.67.32.16 [ 5.436432] [drm] nouveau 0000:00:12.0: TMDS table script pointers not stubbed [ 5.436506] [drm] nouveau 0000:00:12.0: BIT table 'd' not found [ 5.436570] [drm] nouveau 0000:00:12.0: Found Display Configuration Block version 3.0 [ 5.436645] [drm] nouveau 0000:00:12.0: Raw DCB entry 0: 03015323 00000004 [ 5.436710] [drm] nouveau 0000:00:12.0: Raw DCB entry 1: 01000310 00000023 [ 5.436775] [drm] nouveau 0000:00:12.0: Raw DCB entry 2: 020223f1 0040c080 [ 5.436841] [drm] nouveau 0000:00:12.0: DCB connector table: VHER 0x30 5 10 2 [ 5.436906] [drm] nouveau 0000:00:12.0: 0: 0x00000000: type 0x00 idx 0 tag 0xff [ 5.436981] [drm] nouveau 0000:00:12.0: 1: 0x00001161: type 0x61 idx 1 tag 0x07 [ 5.437055] [drm] nouveau 0000:00:12.0: 2: 0x00000210: type 0x10 idx 2 tag 0xff [ 5.437130] [drm] nouveau 0000:00:12.0: 3: 0x00000211: type 0x11 idx 3 tag 0xff [ 5.437204] [drm] nouveau 0000:00:12.0: 4: 0x00000213: type 0x13 idx 4 tag 0xff [ 5.437280] [drm] nouveau 0000:00:12.0: 5: 0x00000340: type 0x40 idx 5 tag 0xff [ 5.437358] [drm] nouveau 0000:00:12.0: Parsing VBIOS init table 0 at offset 0xE333 [ 5.437451] [drm] nouveau 0000:00:12.0: ======= misaligned reg 0x001020FB ======= [ 5.437528] [drm] nouveau 0000:00:12.0: ======= misaligned reg 0x001020FB ======= [ 5.437629] [drm] nouveau 0000:00:12.0: Parsing VBIOS init table 1 at offset 0xE484 [ 5.437703] [drm] nouveau 0000:00:12.0: Parsing VBIOS init table 2 at offset 0xE485 [ 5.437792] [drm] nouveau 0000:00:12.0: Parsing VBIOS init table 3 at offset 0xE607 [ 5.437872] [drm] nouveau 0000:00:12.0: Parsing VBIOS init table 4 at offset 0xE687 [ 5.437950] [drm] nouveau 0000:00:12.0: Detected 128MiB VRAM [ 5.443227] [TTM] Zone kernel: Available graphics memory: 1964134 kiB. [ 5.443290] [TTM] Initializing pool allocator. [ 5.444228] [drm] nouveau 0000:00:12.0: 64 MiB GART (aperture) [ 5.444614] [drm] nouveau 0000:00:12.0: Allocating FIFO number 0 [ 5.445000] [drm] nouveau 0000:00:12.0: nouveau_channel_alloc: initialised FIFO 0 [ 5.445088] [drm] nouveau 0000:00:12.0: Initial CRTC_OWNER is 0 [ 5.445154] [drm] nouveau 0000:00:12.0: Saving VGA fonts [ 5.484536] [drm] nouveau 0000:00:12.0: Detected a LVDS connector [ 5.562804] ata1.00: ATAPI: HL-DT-ST DVDRAM GSA-T20L, NC08, max MWDMA2 [ 5.562898] ata1: nv_mode_filter: 0x39f&0x739f->0x39f, BIOS=0x0 (0xc600) ACPI=0x39f (120:600:0x12) [ 5.586623] [drm] nouveau 0000:00:12.0: Detected a VGA connector [ 5.586722] [drm] nouveau 0000:00:12.0: Detected a TV connector [ 5.587772] [drm] nouveau 0000:00:12.0: Setting dpms mode 3 on lvds encoder (output 0) [ 5.587848] [drm] nouveau 0000:00:12.0: Calling LVDS script 6: [ 5.587912] [drm] nouveau 0000:00:12.0: 0xD680: Parsing digital output script table [ 5.587991] [drm] nouveau 0000:00:12.0: Setting dpms mode 3 on vga encoder (output 1) [ 5.588067] [drm] nouveau 0000:00:12.0: Setting dpms mode 3 on TV encoder (output 2) [ 5.602749] ata1.00: configured for MWDMA2 [ 5.608063] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T20L NC08 PQ: 0 ANSI: 5 [ 5.619507] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 5.619585] Uniform CD-ROM driver Revision: 3.20 [ 5.619801] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 5.619885] sr 1:0:0:0: Attached scsi generic sg0 type 5 [ 5.620116] ata2: port disabled. ignoring. [ 5.632598] firewire_core: created device fw0: GUID 00241b001eff6700, S400 [ 5.730031] [drm] nouveau 0000:00:12.0: Load detected on output B [ 5.730035] ata4: SATA link down (SStatus 0 SControl 300) [ 5.730068] ata5: SATA link down (SStatus 0 SControl 300) [ 5.730100] ata6: SATA link down (SStatus 0 SControl 300) [ 5.730896] [drm] nouveau 0000:00:12.0: allocated 1280x800 fb: 0x49000, bo ffff88012a0b0c00 [ 5.744964] [drm] nouveau 0000:00:12.0: Output LVDS-1 is running on CRTC 0 using output A [ 5.744967] [drm] nouveau 0000:00:12.0: Calling LVDS script 2: [ 5.744971] [drm] nouveau 0000:00:12.0: 0xD6D8: Parsing digital output script table [ 5.920029] [drm] nouveau 0000:00:12.0: Setting dpms mode 0 on lvds encoder (output 0) [ 5.920031] [drm] nouveau 0000:00:12.0: Calling LVDS script 5: [ 5.920034] [drm] nouveau 0000:00:12.0: 0xD676: Parsing digital output script table [ 5.920039] [drm] nouveau 0000:00:12.0: Output LVDS-1 is running on CRTC 0 using output A [ 6.010560] scsi 0:0:0:0: Direct-Access SanDisk Cruzer Micro 6.51 PQ: 0 ANSI: 0 CCS [ 6.018854] sd 0:0:0:0: Attached scsi generic sg1 type 0 [ 6.021547] sd 0:0:0:0: [sda] 3910655 512-byte logical blocks: (2.00 GB/1.86 GiB) [ 6.023151] sd 0:0:0:0: [sda] Write Protect is off [ 6.023156] sd 0:0:0:0: [sda] Mode Sense: 45 00 00 08 [ 6.023159] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 6.026122] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 6.026134] sda: sda1 [ 6.029140] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 6.029145] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 6.030052] [drm] nouveau 0000:00:12.0: Setting dpms mode 0 on TV encoder (output 2) [ 6.030057] [drm] nouveau 0000:00:12.0: Output TV-1 is running on CRTC 1 using output B [ 6.030569] Console: switching to colour frame buffer device 90x36 [ 6.034328] fb0: nouveaufb frame buffer device [ 6.034330] drm: registered panic notifier [ 6.036422] Slow work thread pool: Starting up [ 6.036694] Slow work thread pool: Ready [ 6.036868] [drm] Initialized nouveau 0.0.16 20090420 for 0000:00:12.0 on minor 0 [ 6.132531] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 6.133330] ata3.00: ATA-7: FUJITSU MHW2160BH PL, 891F, max UDMA/100 [ 6.133535] ata3.00: 312581808 sectors, multi 16: LBA48 [ 6.134600] ata3.00: configured for UDMA/100 [ 6.134978] scsi 3:0:0:0: Direct-Access ATA FUJITSU MHW2160B 891F PQ: 0 ANSI: 5 [ 6.135687] sd 3:0:0:0: [sdb] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 6.135691] sd 3:0:0:0: Attached scsi generic sg2 type 0 [ 6.136569] sd 3:0:0:0: [sdb] Write Protect is off [ 6.136931] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 6.136989] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.138254] sdb: sdb1 sdb2 < sdb5 sdb6 > sdb4 [ 6.541371] sd 3:0:0:0: [sdb] Attached SCSI disk [ 7.372468] Btrfs loaded [ 7.379679] xor: automatically using best checksumming function: generic_sse [ 7.422509] generic_sse: 5937.200 MB/sec [ 7.422512] xor: using function: generic_sse (5937.200 MB/sec) [ 7.425803] device-mapper: dm-raid45: initialized v0.2594b [ 7.586125] aufs 2-standalone.tree-35-rcN-20100705 [ 7.605998] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 22.878511] Adding 6289412k swap on /dev/sdb6. Priority:-1 extents:1 across:6289412k [ 23.056187] udev[2653]: starting version 163 [ 23.572010] ACPI: PCI Interrupt Link [LK4E] enabled at IRQ 19 [ 23.572017] alloc irq_desc for 19 on node 0 [ 23.572020] alloc kstat_irqs on node 0 [ 23.572034] b43-pci-bridge 0000:03:00.0: PCI INT A -> Link[LK4E] -> GSI 19 (level, low) -> IRQ 19 [ 23.572043] b43-pci-bridge 0000:03:00.0: setting latency timer to 64 [ 23.609628] EDAC MC: Ver: 2.1.0 Sep 19 2010 [ 23.610272] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x13, vendor 0x4243) [ 23.610280] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0D, vendor 0x4243) [ 23.610287] ssb: Core 2 found: USB 1.1 Host (cc 0x817, rev 0x04, vendor 0x4243) [ 23.610294] ssb: Core 3 found: PCI-E (cc 0x820, rev 0x05, vendor 0x4243) [ 23.610314] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 [ 23.621041] i2c i2c-2: nForce2 SMBus adapter at 0x3040 [ 23.621095] i2c i2c-3: nForce2 SMBus adapter at 0x3000 [ 23.668478] EDAC amd64_edac: Ver: 3.3.0 Sep 19 2010 [ 23.675502] EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3). [ 23.675513] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 23.675515] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. [ 23.675517] (Note that use of the override may cause unknown side effects.) [ 23.675552] amd64_edac: probe of 0000:00:18.2 failed with error -22 [ 23.683315] alloc irq_desc for 42 on node 0 [ 23.683320] alloc kstat_irqs on node 0 [ 23.683333] forcedeth 0000:00:0a.0: irq 42 for MSI/MSI-X [ 23.691290] ssb: Sonics Silicon Backplane found on PCI device 0000:03:00.0 [ 23.875706] cfg80211: Calling CRDA to update world regulatory domain [ 23.901507] input: HP WMI hotkeys as /devices/virtual/input/input6 [ 24.100814] Linux video capture interface: v2.00 [ 24.121676] r852 0000:02:05.3: PCI INT B -> Link[LNK2] -> GSI 7 (level, low) -> IRQ 7 [ 24.121761] r852: Non dma capable device detected, dma disabled [ 24.121773] r852: driver loaded succesfully [ 24.132055] uvcvideo: Found UVC 1.00 device HP Webcam (064e:a101) [ 24.138127] input: HP Webcam as /devices/pci0000:00/0000:00:04.1/usb2/2-2/2-2:1.0/input/input7 [ 24.138260] usbcore: registered new interface driver uvcvideo [ 24.138264] USB Video Class driver (v0.1.0) [ 24.220103] b43-phy0: Broadcom 4311 WLAN found (core revision 13) [ 24.422761] cfg80211: World regulatory domain updated: [ 24.422766] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 24.422770] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 24.422774] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 24.422777] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 24.422779] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 24.422782] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 24.508110] phy0: Selected rate control algorithm 'minstrel' [ 24.508997] Registered led device: b43-phy0::tx [ 24.509023] Registered led device: b43-phy0::rx [ 24.509047] Registered led device: b43-phy0::radio [ 24.509142] Broadcom 43xx driver loaded [ Features: PL, Firmware-ID: FW13 ] [ 24.627023] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21 [ 24.627031] alloc irq_desc for 21 on node 0 [ 24.627033] alloc kstat_irqs on node 0 [ 24.627047] HDA Intel 0000:00:07.0: PCI INT A -> Link[LAZA] -> GSI 21 (level, low) -> IRQ 21 [ 24.627051] hda_intel: Disable MSI for Nvidia chipset [ 24.627131] HDA Intel 0000:00:07.0: setting latency timer to 64 [ 24.742245] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04713/0x200000/0x0 [ 24.823826] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8 [ 25.482605] [drm] nouveau 0000:00:12.0: Load detected on output B [ 25.538525] b43-phy0 ERROR: Firmware file "b43/ucode13.fw" not found [ 25.538531] b43-phy0 ERROR: Firmware file "b43-open/ucode13.fw" not found [ 25.538536] b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website. [ 25.670092] [drm] nouveau 0000:00:12.0: Load detected on output B [ 25.701683] [drm] nouveau 0000:00:12.0: Allocating FIFO number 1 [ 25.702044] [drm] nouveau 0000:00:12.0: nouveau_channel_alloc: initialised FIFO 1 [ 25.874792] [drm] nouveau 0000:00:12.0: Setting dpms mode 3 on lvds encoder (output 0) [ 25.874798] [drm] nouveau 0000:00:12.0: Calling LVDS script 6: [ 25.874803] [drm] nouveau 0000:00:12.0: 0xD680: Parsing digital output script table [ 25.895056] [drm] nouveau 0000:00:12.0: Output LVDS-1 is running on CRTC 0 using output A [ 25.895059] [drm] nouveau 0000:00:12.0: Calling LVDS script 2: [ 25.895062] [drm] nouveau 0000:00:12.0: 0xD6D8: Parsing digital output script table [ 26.016095] lp: driver loaded but no devices found [ 26.070088] [drm] nouveau 0000:00:12.0: Setting dpms mode 0 on lvds encoder (output 0) [ 26.070094] [drm] nouveau 0000:00:12.0: Calling LVDS script 5: [ 26.070099] [drm] nouveau 0000:00:12.0: 0xD676: Parsing digital output script table [ 26.070106] [drm] nouveau 0000:00:12.0: Output LVDS-1 is running on CRTC 0 using output A [ 26.070346] [drm] nouveau 0000:00:12.0: Setting dpms mode 3 on TV encoder (output 2) [ 26.078674] ppdev: user-space parallel port driver [ 26.141074] [drm] nouveau 0000:00:12.0: Setting dpms mode 0 on TV encoder (output 2) [ 26.141079] [drm] nouveau 0000:00:12.0: Output TV-1 is running on CRTC 1 using output B [ 29.760090] [drm] nouveau 0000:00:12.0: Load detected on output B [ 30.160044] [drm] nouveau 0000:00:12.0: Load detected on output B [ 30.352579] [drm] nouveau 0000:00:12.0: Load detected on output B [ 30.530053] [drm] nouveau 0000:00:12.0: Load detected on output B [ 34.350023] eth0: no IPv6 routers present [ 39.600026] [drm] nouveau 0000:00:12.0: Load detected on output B [ 88.012540] Clocksource tsc unstable (delta = -261974125 ns) [ 100.090351] b43-pci-bridge 0000:03:00.0: PCI INT A disabled