[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-24-generic (buildd@vernadsky) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #41-Ubuntu SMP Thu Aug 19 01:12:52 UTC 2010 (Ubuntu 2.6.32-24.41-generic 2.6.32.15+drm33.5) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000001ffe0000 (usable) [ 0.000000] BIOS-e820: 000000001ffe0000 - 000000001ffeec00 (ACPI data) [ 0.000000] BIOS-e820: 000000001ffeec00 - 000000001fff0000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000001fff0000 - 000000001fff4000 (reserved) [ 0.000000] BIOS-e820: 000000001fff4000 - 0000000020000000 (usable) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.3 present. [ 0.000000] last_pfn = 0x20000 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CBFFF write-protect [ 0.000000] CC000-DBFFF uncachable [ 0.000000] DC000-DFFFF write-back [ 0.000000] E0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FE0000000 write-back [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] PAT not supported by CPU. [ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009f800 (usable) [ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000001ffe0000 (usable) [ 0.000000] modified: 000000001ffe0000 - 000000001ffeec00 (ACPI data) [ 0.000000] modified: 000000001ffeec00 - 000000001fff0000 (ACPI NVS) [ 0.000000] modified: 000000001fff0000 - 000000001fff4000 (reserved) [ 0.000000] modified: 000000001fff4000 - 0000000020000000 (usable) [ 0.000000] modified: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-0000000020000000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0020000000 page 2M [ 0.000000] kernel direct mapping tables up to 20000000 @ 7000-b000 [ 0.000000] RAMDISK: 1788f000 - 18027f8c [ 0.000000] ACPI: RSDP 000f6eb0 00014 (v00 PTLTD ) [ 0.000000] ACPI: RSDT 1ffe4b71 0002C (v01 PTLTD RSDT 06041120 LTP 00000000) [ 0.000000] ACPI: FACP 1ffeeb65 00074 (v01 IBM TP-16 06041120 00000000) [ 0.000000] ACPI: DSDT 1ffe4b9d 09FC8 (v01 IBM TP-16 06041120 MSFT 0100000C) [ 0.000000] ACPI: FACS 1ffef000 00040 [ 0.000000] ACPI: BOOT 1ffeebd9 00027 (v01 PTLTD $SBFTBL$ 06041120 LTP 00000001) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 512MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 20000000 [ 0.000000] low ram: 0 - 20000000 [ 0.000000] node 0 low ram: 00000000 - 20000000 [ 0.000000] node 0 bootmap 00007000 - 0000b000 [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0020000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008ddeb8] TEXT DATA BSS ==> [0000100000 - 00008ddeb8] [ 0.000000] #4 [001788f000 - 0018027f8c] RAMDISK ==> [001788f000 - 0018027f8c] [ 0.000000] #5 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] [ 0.000000] #6 [00008de000 - 00008e10f5] BRK ==> [00008de000 - 00008e10f5] [ 0.000000] #7 [0000007000 - 000000b000] BOOTMAP ==> [0000007000 - 000000b000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x00020000 [ 0.000000] HighMem 0x00020000 -> 0x00020000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[4] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000002 [ 0.000000] 0: 0x00000006 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0001ffe0 [ 0.000000] 0: 0x0001fff4 -> 0x00020000 [ 0.000000] On node 0 totalpages: 130951 [ 0.000000] free_area_init_node: node 0, pgdat c079a780, node_mem_map c1001000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3963 pages, LIFO batch:0 [ 0.000000] Normal zone: 992 pages used for memmap [ 0.000000] Normal zone: 125964 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic" [ 0.000000] APIC: disable apic facility [ 0.000000] nr_irqs_gsi: 16 [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000 [ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 000000001ffe0000 - 000000001ffee000 [ 0.000000] PM: Registered nosave memory: 000000001ffee000 - 000000001ffef000 [ 0.000000] PM: Registered nosave memory: 000000001ffef000 - 000000001fff0000 [ 0.000000] PM: Registered nosave memory: 000000001fff0000 - 000000001fff4000 [ 0.000000] Allocating PCI resources starting at 20000000 (gap: 20000000:dff80000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c1800000 s36056 r0 d21288 u4194304 [ 0.000000] pcpu-alloc: s36056 r0 d21288 u4194304 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129927 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-24-generic root=UUID=f8215b26-bea3-4881-aea5-cf22cdc0c21b ro quiet splash [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 2621440 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (00000000:00000000) [ 0.000000] Memory: 500424k/524288k available (4679k kernel code, 23004k reserved, 2124k data, 660k init, 0k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB) [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) [ 0.000000] .init : 0xc07a5000 - 0xc084a000 ( 660 kB) [ 0.000000] .data : 0xc0591e33 - 0xc07a4e88 (2124 kB) [ 0.000000] .text : 0xc0100000 - 0xc0591e33 (4679 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:256 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 896.195 MHz processor. [ 0.004010] Calibrating delay loop (skipped), value calculated using timer frequency.. 1792.39 BogoMIPS (lpj=3584780) [ 0.004064] Security Framework initialized [ 0.004141] AppArmor: AppArmor initialized [ 0.004163] Mount-cache hash table entries: 512 [ 0.008298] Initializing cgroup subsys ns [ 0.008310] Initializing cgroup subsys cpuacct [ 0.008322] Initializing cgroup subsys memory [ 0.008347] Initializing cgroup subsys devices [ 0.008356] Initializing cgroup subsys freezer [ 0.008363] Initializing cgroup subsys net_cls [ 0.008420] CPU: L1 I cache: 16K, L1 D cache: 16K [ 0.008429] CPU: L2 cache: 256K [ 0.008442] mce: CPU supports 5 MCE banks [ 0.008481] Performance Events: [ 0.008488] no APIC, boot with the "lapic" boot parameter to force-enable it. [ 0.008495] no hardware sampling interrupt available. [ 0.008501] p6 PMU driver. [ 0.008537] ... version: 0 [ 0.008543] ... bit width: 32 [ 0.008549] ... generic registers: 2 [ 0.008555] ... value mask: 00000000ffffffff [ 0.008561] ... max period: 000000007fffffff [ 0.008568] ... fixed-purpose events: 0 [ 0.008574] ... event mask: 0000000000000003 [ 0.008586] Checking 'hlt' instruction... OK. [ 0.025420] SMP alternatives: switching to UP code [ 0.039580] Freeing SMP alternatives: 19k freed [ 0.039645] ACPI: Core revision 20090903 [ 0.064564] ACPI: setting ELCR to 0200 (from 0800) [ 0.072036] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.072066] ftrace: allocating 21780 entries in 43 pages [ 0.076311] Enabling APIC mode: Flat. Using 0 I/O APICs [ 0.080028] weird, boot CPU (#0) not listed by the BIOS. [ 0.080036] SMP motherboard not detected. [ 0.080044] Local APIC not detected. Using dummy APIC emulation. [ 0.080050] SMP disabled [ 0.080825] Brought up 1 CPUs [ 0.080840] Total of 1 processors activated (1792.39 BogoMIPS). [ 0.081836] CPU0 attaching NULL sched-domain. [ 0.082279] devtmpfs: initialized [ 0.083386] regulator: core version 0.5 [ 0.083421] Time: 15:49:37 Date: 08/20/10 [ 0.083578] NET: Registered protocol family 16 [ 0.083926] EISA bus registered [ 0.084032] ACPI: bus type pci registered [ 0.084650] PCI: PCI BIOS revision 2.10 entry at 0xfd94f, last bus=7 [ 0.084658] PCI: Using configuration type 1 for base access [ 0.087521] bio: create slab at 0 [ 0.089905] ACPI: EC: Look up EC in DSDT [ 0.480150] ACPI: Interpreter enabled [ 0.480175] ACPI: (supports S0 S1 S3 S4 S5) [ 0.480249] ACPI: Using PIC for interrupt routing [ 0.697831] ACPI: EC: GPE = 0x9, I/O: command/status = 0x66, data = 0x62 [ 0.698021] ACPI: Power Resource [PSER] (off) [ 0.698122] ACPI: Power Resource [PSIO] (on) [ 0.909079] ACPI: ACPI Dock Station Driver: 3 docks/bays found [ 0.909167] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.909291] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xf8000000-0xfbffffff] [ 0.909414] pci 0000:00:02.0: reg 10 32bit mmio: [0x50000000-0x50000fff] [ 0.909443] pci 0000:00:02.0: supports D1 D2 [ 0.909451] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.909461] pci 0000:00:02.0: PME# disabled [ 0.909509] pci 0000:00:02.1: reg 10 32bit mmio: [0x50100000-0x50100fff] [ 0.909535] pci 0000:00:02.1: supports D1 D2 [ 0.909542] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.909551] pci 0000:00:02.1: PME# disabled [ 0.909604] pci 0000:00:03.0: reg 10 32bit mmio: [0xe8120000-0xe8120fff] [ 0.909618] pci 0000:00:03.0: reg 14 io port: [0x1800-0x183f] [ 0.909630] pci 0000:00:03.0: reg 18 32bit mmio: [0xe8100000-0xe811ffff] [ 0.909655] pci 0000:00:03.0: reg 30 32bit mmio pref: [0x000000-0x00ffff] [ 0.909679] pci 0000:00:03.0: supports D1 D2 [ 0.909686] pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.909695] pci 0000:00:03.0: PME# disabled [ 0.909740] pci 0000:00:03.1: reg 10 io port: [0x1840-0x1847] [ 0.909753] pci 0000:00:03.1: reg 14 32bit mmio: [0xe8121000-0xe8121fff] [ 0.909797] pci 0000:00:03.1: supports D1 D2 [ 0.909804] pci 0000:00:03.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.909813] pci 0000:00:03.1: PME# disabled [ 0.909874] pci 0000:00:05.0: reg 10 32bit mmio: [0xe8122000-0xe8122fff] [ 0.909888] pci 0000:00:05.0: reg 14 32bit mmio: [0xe8000000-0xe80fffff] [ 0.909934] pci 0000:00:05.0: supports D1 D2 [ 0.910052] pci 0000:00:07.1: reg 20 io port: [0x1850-0x185f] [ 0.910125] pci 0000:00:07.2: reg 20 io port: [0x1860-0x187f] [ 0.910217] pci 0000:00:07.3: quirk: region 1000-103f claimed by PIIX4 ACPI [ 0.910228] pci 0000:00:07.3: quirk: region 1040-104f claimed by PIIX4 SMB [ 0.910240] pci 0000:00:07.3: PIIX4 devres C PIO at 15e8-15ef [ 0.910250] pci 0000:00:07.3: PIIX4 devres I PIO at 03f0-03f7 [ 0.910258] pci 0000:00:07.3: PIIX4 devres J PIO at 002e-002f [ 0.910362] pci 0000:01:00.0: reg 10 32bit mmio: [0xf0000000-0xf7ffffff] [ 0.910394] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x00ffff] [ 0.910421] pci 0000:01:00.0: supports D1 D2 [ 0.910474] pci 0000:00:01.0: bridge 32bit mmio: [0xf0000000-0xf7ffffff] [ 0.910529] pci_bus 0000:00: on NUMA node 0 [ 0.910544] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.912145] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 0.922404] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) [ 0.922851] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) [ 0.923291] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) [ 0.923731] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) [ 0.924121] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.924130] vgaarb: loaded [ 0.924519] SCSI subsystem initialized [ 0.924744] libata version 3.00 loaded. [ 0.924978] usbcore: registered new interface driver usbfs [ 0.925018] usbcore: registered new interface driver hub [ 0.925101] usbcore: registered new device driver usb [ 0.925514] ACPI: WMI: Mapper loaded [ 0.925520] PCI: Using ACPI for IRQ routing [ 0.926033] NetLabel: Initializing [ 0.926039] NetLabel: domain hash size = 128 [ 0.926045] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.926083] NetLabel: unlabeled traffic allowed by default [ 0.926225] Switching to clocksource tsc [ 0.929861] AppArmor: AppArmor Filesystem Enabled [ 0.929932] pnp: PnP ACPI init [ 0.930015] ACPI: bus type pnp registered [ 1.041707] pnp: PnP ACPI: found 14 devices [ 1.041717] ACPI: ACPI bus type pnp unregistered [ 1.041727] PnPBIOS: Disabled by ACPI PNP [ 1.041768] system 00:00: iomem range 0x0-0x9ffff could not be reserved [ 1.041779] system 00:00: iomem range 0xc0000-0xc3fff could not be reserved [ 1.041788] system 00:00: iomem range 0xc4000-0xc7fff could not be reserved [ 1.041798] system 00:00: iomem range 0xc8000-0xcbfff could not be reserved [ 1.041807] system 00:00: iomem range 0xcc000-0xcffff could not be reserved [ 1.041817] system 00:00: iomem range 0xdc000-0xdffff could not be reserved [ 1.041826] system 00:00: iomem range 0xe0000-0xe3fff could not be reserved [ 1.041835] system 00:00: iomem range 0xe4000-0xe7fff could not be reserved [ 1.041845] system 00:00: iomem range 0xe8000-0xebfff could not be reserved [ 1.041854] system 00:00: iomem range 0xec000-0xeffff could not be reserved [ 1.041863] system 00:00: iomem range 0xf0000-0xfffff could not be reserved [ 1.041873] system 00:00: iomem range 0x100000-0x1fffffff could not be reserved [ 1.041884] system 00:00: iomem range 0xfff80000-0xffffffff has been reserved [ 1.041907] system 00:02: ioport range 0x1000-0x103f has been reserved [ 1.041917] system 00:02: ioport range 0x1040-0x104f has been reserved [ 1.041926] system 00:02: ioport range 0xfe00-0xfe0f has been reserved [ 1.041950] system 00:09: ioport range 0x15e0-0x15ef has been reserved [ 1.077084] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 1.077092] pci 0000:00:01.0: IO window: disabled [ 1.077104] pci 0000:00:01.0: MEM window: 0xf0000000-0xf7ffffff [ 1.077114] pci 0000:00:01.0: PREFETCH window: 0x30000000-0x300fffff [ 1.077126] pci 0000:00:02.0: CardBus bridge, secondary bus 0000:02 [ 1.077134] pci 0000:00:02.0: IO window: 0x001400-0x0014ff [ 1.077144] pci 0000:00:02.0: IO window: 0x001c00-0x001cff [ 1.077154] pci 0000:00:02.0: PREFETCH window: 0x20000000-0x23ffffff [ 1.077163] pci 0000:00:02.0: MEM window: 0x24000000-0x27ffffff [ 1.077173] pci 0000:00:02.1: CardBus bridge, secondary bus 0000:06 [ 1.077181] pci 0000:00:02.1: IO window: 0x002000-0x0020ff [ 1.077190] pci 0000:00:02.1: IO window: 0x002400-0x0024ff [ 1.077199] pci 0000:00:02.1: PREFETCH window: 0x28000000-0x2bffffff [ 1.077209] pci 0000:00:02.1: MEM window: 0x2c000000-0x2fffffff [ 1.077374] pci 0000:00:02.0: power state changed by ACPI to D0 [ 1.077459] pci 0000:00:02.0: power state changed by ACPI to D0 [ 1.078246] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 [ 1.078254] PCI: setting IRQ 11 as level-triggered [ 1.078265] pci 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 1.078355] pci 0000:00:02.1: power state changed by ACPI to D0 [ 1.078439] pci 0000:00:02.1: power state changed by ACPI to D0 [ 1.079144] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 [ 1.079155] pci 0000:00:02.1: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 1.079173] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 1.079181] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 1.079190] pci_bus 0000:01: resource 1 mem: [0xf0000000-0xf7ffffff] [ 1.079198] pci_bus 0000:01: resource 2 pref mem [0x30000000-0x300fffff] [ 1.079207] pci_bus 0000:02: resource 0 io: [0x1400-0x14ff] [ 1.079214] pci_bus 0000:02: resource 1 io: [0x1c00-0x1cff] [ 1.079222] pci_bus 0000:02: resource 2 pref mem [0x20000000-0x23ffffff] [ 1.079230] pci_bus 0000:02: resource 3 mem: [0x24000000-0x27ffffff] [ 1.079239] pci_bus 0000:06: resource 0 io: [0x2000-0x20ff] [ 1.079246] pci_bus 0000:06: resource 1 io: [0x2400-0x24ff] [ 1.079254] pci_bus 0000:06: resource 2 pref mem [0x28000000-0x2bffffff] [ 1.079262] pci_bus 0000:06: resource 3 mem: [0x2c000000-0x2fffffff] [ 1.079375] NET: Registered protocol family 2 [ 1.079678] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 1.080595] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 1.080953] TCP bind hash table entries: 16384 (order: 5, 131072 bytes) [ 1.081377] TCP: Hash tables configured (established 16384 bind 16384) [ 1.081386] TCP reno registered [ 1.081864] NET: Registered protocol family 1 [ 1.081931] pci 0000:00:00.0: Limiting direct PCI/PCI transfers [ 1.082039] pci 0000:01:00.0: Boot video device [ 1.082318] Simple Boot Flag at 0x35 set to 0x1 [ 1.082556] cpufreq-nforce2: No nForce2 chipset. [ 1.082625] Scanning for low memory corruption every 60 seconds [ 1.083074] audit: initializing netlink socket (disabled) [ 1.083109] type=2000 audit(1282319378.081:1): initialized [ 1.108587] Trying to unpack rootfs image as initramfs... [ 1.135023] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 1.147945] VFS: Disk quotas dquot_6.5.2 [ 1.148179] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.150315] fuse init (API version 7.13) [ 1.150610] msgmni has been set to 978 [ 1.158240] alg: No test for stdrng (krng) [ 1.158502] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.158512] io scheduler noop registered [ 1.158518] io scheduler anticipatory registered [ 1.158523] io scheduler deadline registered [ 1.158724] io scheduler cfq registered (default) [ 1.159033] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.159114] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.159751] ACPI: AC Adapter [AC] (on-line) [ 1.159993] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 1.160327] ACPI: Lid Switch [LID] [ 1.160470] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 1.160484] ACPI: Sleep Button [SLPB] [ 1.160654] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 1.160663] ACPI: Power Button [PWRF] [ 1.161057] Marking TSC unstable due to TSC halts in idle [ 1.161173] processor LNXCPU:00: registered as cooling_device0 [ 1.166718] Switching to clocksource acpi_pm [ 1.285487] thermal LNXTHERM:01: registered as thermal_zone0 [ 1.285519] ACPI: Thermal Zone [THM0] (55 C) [ 1.295723] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.296594] isapnp: Scanning for PnP cards... [ 1.310955] serial 00:0b: activated [ 1.311918] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.357012] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 [ 1.357027] serial 0000:00:03.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 1.371647] ACPI: Battery Slot [BAT0] (battery present) [ 1.377043] brd: module loaded [ 1.379718] loop: module loaded [ 1.380605] input: Macintosh mouse button emulation as /devices/virtual/input/input3 [ 1.380982] ata_piix 0000:00:07.1: version 2.13 [ 1.383090] scsi0 : ata_piix [ 1.385042] scsi1 : ata_piix [ 1.641393] ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0x1850 irq 14 [ 1.641407] ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0x1858 irq 15 [ 1.642552] Fixed MDIO Bus: probed [ 1.642666] PPP generic driver version 2.4.2 [ 1.642896] tun: Universal TUN/TAP device driver, 1.6 [ 1.642903] tun: (C) 1999-2004 Max Krasnyansky [ 1.643184] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.643244] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.643296] uhci_hcd: USB Universal Host Controller Interface driver [ 1.649216] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 [ 1.649235] uhci_hcd 0000:00:07.2: PCI INT D -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 [ 1.649263] uhci_hcd 0000:00:07.2: UHCI Host Controller [ 1.649529] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1 [ 1.649586] uhci_hcd 0000:00:07.2: irq 11, io base 0x00001860 [ 1.649928] usb usb1: configuration #1 chosen from 1 choice [ 1.650017] hub 1-0:1.0: USB hub found [ 1.650049] hub 1-0:1.0: 2 ports detected [ 1.650345] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 1.682402] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.682442] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.689138] mice: PS/2 mouse device common for all mice [ 1.689572] rtc_cmos 00:06: RTC can wake from S4 [ 1.689749] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 [ 1.689788] rtc0: alarms up to one month, y3k, 242 bytes nvram [ 1.690199] device-mapper: uevent: version 1.0.3 [ 1.690618] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 1.692407] device-mapper: multipath: version 1.1.0 loaded [ 1.692421] device-mapper: multipath round-robin: version 1.0.0 loaded [ 1.693073] EISA: Probing bus 0 at eisa.0 [ 1.693089] Cannot allocate resource for EISA slot 1 [ 1.693097] Cannot allocate resource for EISA slot 2 [ 1.693124] EISA: Detected 0 cards. [ 1.695742] cpuidle: using governor ladder [ 1.695911] cpuidle: using governor menu [ 1.697538] TCP cubic registered [ 1.698095] NET: Registered protocol family 10 [ 1.699549] lo: Disabled Privacy Extensions [ 1.701983] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 1.708596] NET: Registered protocol family 17 [ 1.708824] Using IPI No-Shortcut mode [ 1.709129] PM: Resume from disk failed. [ 1.709184] registered taskstats version 1 [ 1.709593] Magic number: 6:892:841 [ 1.709771] rtc_cmos 00:06: setting system clock to 2010-08-20 15:49:38 UTC (1282319378) [ 1.709781] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.709786] EDD information not available. [ 1.848864] ata2.01: NODEV after polling detection [ 1.862788] ata1.00: ATA-5: IBM-DJSA-220, JS4IAC6A, max UDMA/66 [ 1.862801] ata1.00: 39070080 sectors, multi 16: LBA [ 1.872828] ata2.00: ATAPI: HITACHI DVD-ROM GD-S200, 0034, max UDMA/33 [ 1.888493] ata2.00: configured for UDMA/33 [ 1.940147] ata1.00: configured for UDMA/33 [ 2.028361] isapnp: No Plug & Play device found [ 2.028825] scsi 0:0:0:0: Direct-Access ATA IBM-DJSA-220 JS4I PQ: 0 ANSI: 5 [ 2.029334] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.029823] sd 0:0:0:0: [sda] 39070080 512-byte logical blocks: (20.0 GB/18.6 GiB) [ 2.029974] sd 0:0:0:0: [sda] Write Protect is off [ 2.029984] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.030062] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.030512] sda: [ 2.045646] scsi 1:0:0:0: CD-ROM HITACHI DVD-ROM GD-S200 0034 PQ: 0 ANSI: 5 [ 2.050936] sda1 sda2 [ 2.084903] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.182860] Freeing initrd memory: 7779k freed [ 2.226016] Freeing unused kernel memory: 660k freed [ 2.229669] Write protecting the kernel text: 4680k [ 2.229769] Write protecting the kernel read-only data: 1844k [ 2.295525] udev: starting version 151 [ 2.949626] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 2.949638] e100: Copyright(c) 1999-2006 Intel Corporation [ 2.949741] e100 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 3.036309] e100 0000:00:03.0: PME# disabled [ 3.038817] e100: eth0: e100_probe: addr 0xe8120000, irq 11, MAC addr 00:03:47:90:98:2b [ 3.246473] EXT4-fs (sda1): INFO: recovery required on readonly filesystem [ 3.246489] EXT4-fs (sda1): write access will be enabled during recovery [ 12.249397] EXT4-fs (sda1): orphan cleanup on readonly fs [ 12.249430] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 135348 [ 12.249660] EXT4-fs (sda1): 1 orphan inode deleted [ 12.249671] EXT4-fs (sda1): recovery complete [ 12.563509] EXT4-fs (sda1): mounted filesystem with ordered data mode [ 15.266481] Adding 732152k swap on /dev/sda5. Priority:-1 extents:1 across:732152k [ 15.767773] udev: starting version 151 [ 16.885326] Linux agpgart interface v0.103 [ 16.917829] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 16.982051] piix4_smbus 0000:00:07.3: IBM system detected; this module may corrupt your serial eeprom! Refusing to load module! [ 16.982075] piix4_smbus: probe of 0000:00:07.3 failed with error -1 [ 17.120654] vga16fb: initializing [ 17.120674] vga16fb: mapped to 0xc00a0000 [ 17.121374] fb0: VGA16 VGA frame buffer device [ 17.730243] irda_init() [ 17.730293] NET: Registered protocol family 23 [ 17.752768] agpgart-intel 0000:00:00.0: Intel 440BX Chipset [ 17.785910] Non-volatile memory driver v1.3 [ 17.788360] agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xf8000000 [ 17.829843] yenta_cardbus 0000:00:02.0: CardBus bridge found [1014:0130] [ 17.829875] yenta_cardbus 0000:00:02.0: Using INTVAL to route CSC interrupts to PCI [ 17.829883] yenta_cardbus 0000:00:02.0: Routing CardBus interrupts to PCI [ 17.829894] yenta_cardbus 0000:00:02.0: TI: mfunc 0x00001000, devctl 0x66 [ 17.834943] parport_pc 00:0c: activated [ 17.834956] parport_pc 00:0c: reported by Plug and Play ACPI [ 17.835002] parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE] [ 17.983364] nsc-ircc 00:0d: activated [ 17.983379] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 1. [ 17.983650] nsc-ircc, chip->init [ 17.983657] nsc-ircc, Found chip at base=0x02e [ 17.983690] nsc-ircc, driver loaded (Dag Brattli) [ 17.989742] IrDA: Registered device irda0 [ 17.989756] nsc-ircc, Using dongle: IBM31T1100 or Temic TFDS6000/TFDS6500 [ 18.021360] lp0: using parport0 (interrupt-driven). [ 18.066177] yenta_cardbus 0000:00:02.0: ISA IRQ mask 0x0470, PCI irq 11 [ 18.066188] yenta_cardbus 0000:00:02.0: Socket status: 30000020 [ 18.071743] yenta_cardbus 0000:00:02.1: CardBus bridge found [1014:0130] [ 18.071771] yenta_cardbus 0000:00:02.1: Using INTVAL to route CSC interrupts to PCI [ 18.071779] yenta_cardbus 0000:00:02.1: Routing CardBus interrupts to PCI [ 18.071790] yenta_cardbus 0000:00:02.1: TI: mfunc 0x00001000, devctl 0x66 [ 18.146693] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:07/LNXVIDEO:00/input/input5 [ 18.147118] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 18.227460] ppdev: user-space parallel port driver [ 18.283439] psmouse serio1: ID: 10 00 64 [ 18.300634] yenta_cardbus 0000:00:02.1: ISA IRQ mask 0x0470, PCI irq 11 [ 18.300644] yenta_cardbus 0000:00:02.1: Socket status: 30000006 [ 18.625109] thinkpad_acpi: ThinkPad ACPI Extras v0.24 [ 18.625118] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 18.625124] thinkpad_acpi: ThinkPad BIOS 16ET32WW (1.12 ), EC unknown [ 18.632204] Registered led device: tpacpi::thinklight [ 18.632791] Registered led device: tpacpi::power [ 18.633034] Registered led device: tpacpi::standby [ 18.641846] thinkpad_acpi: Console audio control enabled, mode: monitor (read only) [ 18.642733] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input6 [ 18.731818] pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0 [ 18.731887] pci 0000:02:00.0: reg 10 32bit mmio: [0x000000-0x00ffff] [ 18.894956] Console: switching to colour frame buffer device 80x30 [ 19.109152] IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 19.175704] cfg80211: Calling CRDA to update world regulatory domain [ 19.197672] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input7 [ 20.012506] type=1505 audit(1282319396.802:2): operation="profile_load" pid=528 name="/sbin/dhclient3" [ 20.013766] type=1505 audit(1282319396.802:3): operation="profile_load" pid=528 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 20.014431] type=1505 audit(1282319396.802:4): operation="profile_load" pid=528 name="/usr/lib/connman/scripts/dhclient-script" [ 20.148831] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af: clean. [ 20.149654] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [ 20.150057] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff: clean. [ 20.150407] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7: clean. [ 20.151082] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: clean. [ 20.152641] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean. [ 20.153471] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [ 20.153874] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean. [ 20.154225] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean. [ 20.154909] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. [ 20.573481] ath5k 0000:02:00.0: enabling device (0000 -> 0002) [ 20.573510] ath5k 0000:02:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 20.573642] ath5k 0000:02:00.0: registered as 'phy0' [ 20.843615] ath: EEPROM regdomain: 0x0 [ 20.843626] ath: EEPROM indicates default country code should be used [ 20.843633] ath: doing EEPROM country->regdmn map search [ 20.843643] ath: country maps to regdmn code: 0x3a [ 20.843650] ath: Country alpha2 being used: US [ 20.843655] ath: Regpair used: 0x3a [ 21.381659] phy0: Selected rate control algorithm 'minstrel' [ 21.384693] ath5k phy0: Atheros AR5212 chip found (MAC: 0x56, PHY: 0x41) [ 21.384704] ath5k phy0: RF2112B 2GHz radio found (0x46) [ 21.384726] cfg80211: Calling CRDA for country: US [ 22.010387] cfg80211: Regulatory domain changed to country: US [ 22.010400] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 22.010410] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 22.010419] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 22.010427] (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 22.010435] (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 22.010443] (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 22.010451] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 22.237375] Sound Fusion CS46xx 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 22.869785] gameport: CS46xx Gameport is pci0000:00:05.0/gameport0, speed 1807kHz [ 28.296192] type=1505 audit(1282319405.086:5): operation="profile_load" pid=679 name="/usr/share/gdm/guest-session/Xsession" [ 28.302374] type=1505 audit(1282319405.090:6): operation="profile_replace" pid=683 name="/sbin/dhclient3" [ 28.303654] type=1505 audit(1282319405.090:7): operation="profile_replace" pid=683 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 28.305355] type=1505 audit(1282319405.094:8): operation="profile_replace" pid=683 name="/usr/lib/connman/scripts/dhclient-script" [ 28.503441] type=1505 audit(1282319405.290:9): operation="profile_load" pid=684 name="/usr/bin/evince" [ 28.522625] type=1505 audit(1282319405.310:10): operation="profile_load" pid=684 name="/usr/bin/evince-previewer" [ 28.536836] type=1505 audit(1282319405.326:11): operation="profile_load" pid=684 name="/usr/bin/evince-thumbnailer" [ 28.609982] type=1505 audit(1282319405.398:12): operation="profile_load" pid=686 name="/usr/lib/cups/backend/cups-pdf" [ 28.611560] type=1505 audit(1282319405.398:13): operation="profile_load" pid=686 name="/usr/sbin/cupsd" [ 28.670076] type=1505 audit(1282319405.459:14): operation="profile_load" pid=687 name="/usr/sbin/tcpdump" [ 29.348396] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 29.374080] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 36.175934] [drm] Initialized drm 1.1.0 20060810 [ 36.278505] pci 0000:01:00.0: power state changed by ACPI to D0 [ 36.278600] pci 0000:01:00.0: power state changed by ACPI to D0 [ 36.278623] pci 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 36.281373] [drm] Initialized savage 2.4.1 20050313 for 0000:01:00.0 on minor 0 [ 250.916860] wlan0: direct probe to AP 00:90:4c:91:00:01 (try 1) [ 250.916934] wlan0: deauthenticating from 00:90:4c:91:00:01 by local choice (reason=3) [ 250.917006] wlan0: direct probe to AP 00:90:4c:91:00:01 (try 1) [ 250.920280] wlan0: direct probe responded [ 250.920299] wlan0: authenticate with AP 00:90:4c:91:00:01 (try 1) [ 250.924620] wlan0: authenticated [ 250.924695] wlan0: associate with AP 00:90:4c:91:00:01 (try 1) [ 250.926918] wlan0: RX AssocResp from 00:90:4c:91:00:01 (capab=0x431 status=0 aid=3) [ 250.926930] wlan0: associated [ 250.928333] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 261.260037] wlan0: no IPv6 routers present [ 6329.416399] ath5k phy0: noise floor calibration timeout (2457MHz) [ 7049.836384] ath5k phy0: noise floor calibration timeout (2462MHz) [ 7169.420365] ath5k phy0: noise floor calibration timeout (2457MHz) [ 7312.675493] ath5k phy0: unsupported jumbo [10169.424217] ath5k phy0: noise floor calibration timeout (2457MHz) [10838.611570] ath5k phy0: unsupported jumbo [16169.824383] ath5k phy0: noise floor calibration timeout (2462MHz) [33089.440217] ath5k phy0: noise floor calibration timeout (2457MHz) [35489.824383] ath5k phy0: noise floor calibration timeout (2462MHz) [37289.452233] ath5k phy0: noise floor calibration timeout (2457MHz) [41609.416366] ath5k phy0: noise floor calibration timeout (2457MHz) [127756.500253] No probe response from AP 00:90:4c:91:00:01 after 500ms, disconnecting. [127757.687700] wlan0: direct probe to AP 00:90:4c:91:00:01 (try 1) [127757.884223] wlan0: direct probe to AP 00:90:4c:91:00:01 (try 2) [127758.084218] wlan0: direct probe to AP 00:90:4c:91:00:01 (try 3) [127758.284077] wlan0: direct probe to AP 00:90:4c:91:00:01 timed out [127774.821352] wlan0: direct probe to AP 00:90:4c:91:00:01 (try 1) [127775.020109] wlan0: direct probe to AP 00:90:4c:91:00:01 (try 2) [127775.220108] wlan0: direct probe to AP 00:90:4c:91:00:01 (try 3) [127775.420085] wlan0: direct probe to AP 00:90:4c:91:00:01 timed out [127785.892229] wlan0: direct probe to AP 00:90:4c:91:00:01 (try 1) [127786.092092] wlan0: direct probe to AP 00:90:4c:91:00:01 (try 2) [127786.099650] wlan0: direct probe responded [127786.099662] wlan0: authenticate with AP 00:90:4c:91:00:01 (try 1) [127786.296188] wlan0: authenticate with AP 00:90:4c:91:00:01 (try 2) [127786.496233] wlan0: authenticate with AP 00:90:4c:91:00:01 (try 3) [127786.512208] wlan0: authenticated [127786.512290] wlan0: associate with AP 00:90:4c:91:00:01 (try 1) [127786.712091] wlan0: associate with AP 00:90:4c:91:00:01 (try 2) [127786.912111] wlan0: associate with AP 00:90:4c:91:00:01 (try 3) [127786.917604] wlan0: RX AssocResp from 00:90:4c:91:00:01 (capab=0x431 status=0 aid=3) [127786.917614] wlan0: associated [127796.921681] wlan0: deauthenticating from 00:90:4c:91:00:01 by local choice (reason=3) [127797.324821] wlan0: deauthenticating from 00:90:4c:91:00:01 by local choice (reason=3) [127797.588204] wlan0: direct probe to AP 00:90:4c:91:00:01 (try 1) [127797.590079] wlan0: direct probe responded [127797.590088] wlan0: authenticate with AP 00:90:4c:91:00:01 (try 1) [127797.603910] wlan0: authenticated [127797.603970] wlan0: associate with AP 00:90:4c:91:00:01 (try 1) [127797.606160] wlan0: RX AssocResp from 00:90:4c:91:00:01 (capab=0x431 status=0 aid=3) [127797.606171] wlan0: associated [127930.556191] No probe response from AP 00:90:4c:91:00:01 after 500ms, disconnecting. [127931.745027] wlan0: direct probe to AP 00:90:4c:91:00:01 (try 1) [127931.747242] wlan0: direct probe responded [127931.747258] wlan0: authenticate with AP 00:90:4c:91:00:01 (try 1) [127931.748999] wlan0: authenticated [127931.749071] wlan0: associate with AP 00:90:4c:91:00:01 (try 1) [127931.751154] wlan0: RX AssocResp from 00:90:4c:91:00:01 (capab=0x431 status=0 aid=3) [127931.751163] wlan0: associated [196598.508993] ath5k phy0: unsupported jumbo [200562.388702] ath5k phy0: unsupported jumbo [201269.840826] soffice.bin[21943]: segfault at 17305e9 ip 017305e9 sp b3dc01a0 error 4 in libpangoft2-1.0.so.0.2800.0[17d2000+25000] [256294.328331] soffice.bin[28047]: segfault at 155e5e9 ip 0155e5e9 sp b3d4b1a0 error 4 in libnss_mdns4_minimal.so.2[1600000+2000] [400824.000355] e100: eth0 NIC Link is Up 100 Mbps Full Duplex [400824.000761] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [400834.392084] eth0: no IPv6 routers present [401030.000421] e100: eth0 NIC Link is Down