[ 0.000000] Linux version 5.4.0-12-generic (buildd@lcy01-amd64-006) (gcc version 9.2.1 20200117 (Ubuntu 9.2.1-24ubuntu1)) #15-Ubuntu SMP Tue Jan 21 15:12:29 UTC 2020 (Ubuntu 5.4.0-12.15-generic 5.4.8) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.4.0-12-generic root=UUID=a21f798f-9b08-449c-95e5-a31cefdae0b7 ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Hygon HygonGenuine [ 0.000000] Centaur CentaurHauls [ 0.000000] zhaoxin Shanghai [ 0.000000] x86/fpu: x87 FPU will use FXSAVE [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf55abff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bf55ac00-0x00000000bf55ebff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bf55ec00-0x00000000bf560bff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000bf560c00-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fed003ff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed9ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013bffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.5 present. [ 0.000000] DMI: Dell Inc. OptiPlex 330 /0KP561, BIOS A09 05/24/2011 [ 0.000000] tsc: Fast TSC calibration failed [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] last_pfn = 0x13c000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0BF700000 mask FFFF00000 uncachable [ 0.000000] 1 base 0BF800000 mask FFF800000 uncachable [ 0.000000] 2 base 0BF600000 mask FFFF00000 uncachable [ 0.000000] 3 base 0C0000000 mask FC0000000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000000] last_pfn = 0xbf55a max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fe710-0x000fe71f] [ 0.000000] check: Scanning 1 areas for low memory corruption [ 0.000000] BRK [0x110401000, 0x110401fff] PGTABLE [ 0.000000] BRK [0x110402000, 0x110402fff] PGTABLE [ 0.000000] BRK [0x110403000, 0x110403fff] PGTABLE [ 0.000000] BRK [0x110404000, 0x110404fff] PGTABLE [ 0.000000] BRK [0x110405000, 0x110405fff] PGTABLE [ 0.000000] BRK [0x110406000, 0x110406fff] PGTABLE [ 0.000000] BRK [0x110407000, 0x110407fff] PGTABLE [ 0.000000] BRK [0x110408000, 0x110408fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x3230d000-0x3517dfff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000FEBF0 000024 (v02 DELL ) [ 0.000000] ACPI: XSDT 0x00000000000FD033 000064 (v01 DELL B9K 00000015 ASL 00000061) [ 0.000000] ACPI: FACP 0x00000000000FD153 0000F4 (v03 DELL B9K 00000015 ASL 00000061) [ 0.000000] ACPI: DSDT 0x00000000FFF5DFEE 00332A (v01 DELL dt_ex 00001000 INTL 20050624) [ 0.000000] ACPI: FACS 0x00000000BF55AC00 000040 [ 0.000000] ACPI: FACS 0x00000000BF55AC00 000040 [ 0.000000] ACPI: SSDT 0x00000000FFF61439 0000AC (v01 DELL st_ex 00001000 INTL 20050624) [ 0.000000] ACPI: APIC 0x00000000000FD247 000092 (v01 DELL B9K 00000015 ASL 00000061) [ 0.000000] ACPI: BOOT 0x00000000000FD2D9 000028 (v01 DELL B9K 00000015 ASL 00000061) [ 0.000000] ACPI: ASF! 0x00000000000FD301 000092 (v32 DELL B9K 00000015 ASL 00000061) [ 0.000000] ACPI: MCFG 0x00000000000FD393 00003E (v01 DELL B9K 00000015 ASL 00000061) [ 0.000000] ACPI: HPET 0x00000000000FD3D1 000038 (v01 DELL B9K 00000015 ASL 00000061) [ 0.000000] ACPI: SLIC 0x00000000000FD409 000176 (v01 DELL B9K 00000015 ASL 00000061) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000013bffffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x13bfd5000-0x13bffffff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000013bffffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000bf559fff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000013bffffff] [ 0.000000] Zeroed struct page in unavailable ranges: 2824 pages [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000013bffffff] [ 0.000000] On node 0 totalpages: 1029368 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 12182 pages used for memmap [ 0.000000] DMA32 zone: 779610 pages, LIFO batch:63 [ 0.000000] Normal zone: 3840 pages used for memmap [ 0.000000] Normal zone: 245760 pages, LIFO batch:63 [ 0.000000] Reserving Intel graphics memory at [mem 0xbf800000-0xbfffffff] [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 6 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x000effff] [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf55a000-0xbf55afff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf55b000-0xbf55dfff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf55e000-0xbf55efff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf55f000-0xbf55ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf560000-0xbf560fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf561000-0xbfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfecfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfed9ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfeda0000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfef00000-0xffafffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffb00000-0xffffffff] [ 0.000000] [mem 0xc0000000-0xdfffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u262144 [ 0.000000] pcpu-alloc: s184320 r8192 d28672 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1013261 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.4.0-12-generic root=UUID=a21f798f-9b08-449c-95e5-a31cefdae0b7 ro quiet splash vt.handoff=7 [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 3897460K/4117472K available (14339K kernel code, 2394K rwdata, 4920K rodata, 2680K init, 5032K bss, 220012K reserved, 0K cma-reserved) [ 0.000000] random: get_random_u64 called from kmem_cache_open+0x2d/0x410 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Kernel/User page tables isolation: enabled [ 0.000000] ftrace: allocating 43893 entries in 172 pages [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. [ 0.000000] Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.000000] NR_IRQS: 524544, nr_irqs: 488, preallocated irqs: 16 [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] printk: console [tty0] enabled [ 0.000000] ACPI: Core revision 20190816 [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] APIC: Switch to symmetric I/O mode setup [ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.024000] tsc: PIT calibration matches HPET. 1 loops [ 0.024000] tsc: Detected 2192.890 MHz processor [ 0.000006] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1f9bf65a10e, max_idle_ns: 440795275610 ns [ 0.000010] Calibrating delay loop (skipped), value calculated using timer frequency.. 4385.78 BogoMIPS (lpj=8771560) [ 0.000013] pid_max: default: 32768 minimum: 301 [ 0.000067] LSM: Security Framework initializing [ 0.000087] Yama: becoming mindful. [ 0.000182] AppArmor: AppArmor initialized [ 0.000258] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.000283] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.000311] *** VALIDATE tmpfs *** [ 0.000573] *** VALIDATE proc *** [ 0.000675] *** VALIDATE cgroup1 *** [ 0.000677] *** VALIDATE cgroup2 *** [ 0.000752] mce: CPU0: Thermal monitoring enabled (TM2) [ 0.000756] process: using mwait in idle threads [ 0.000760] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4 [ 0.000761] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0 [ 0.000765] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.000767] Spectre V2 : Mitigation: Full generic retpoline [ 0.000768] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.000769] Speculative Store Bypass: Vulnerable [ 0.000774] MDS: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.000960] Freeing SMP alternatives memory: 36K [ 0.114267] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU E4500 @ 2.20GHz (family: 0x6, model: 0xf, stepping: 0xd) [ 0.114464] Performance Events: PEBS fmt0+, Core2 events, 4-deep LBR, Intel PMU driver. [ 0.114472] core: PEBS disabled due to CPU errata [ 0.114474] ... version: 2 [ 0.114475] ... bit width: 40 [ 0.114476] ... generic registers: 2 [ 0.114477] ... value mask: 000000ffffffffff [ 0.114478] ... max period: 000000007fffffff [ 0.114479] ... fixed-purpose events: 3 [ 0.114480] ... event mask: 0000000700000003 [ 0.114547] rcu: Hierarchical SRCU implementation. [ 0.116004] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.116008] smp: Bringing up secondary CPUs ... [ 0.116008] x86: Booting SMP configuration: [ 0.116008] .... node #0, CPUs: #1 [ 0.116114] smp: Brought up 1 node, 2 CPUs [ 0.116114] smpboot: Max logical packages: 4 [ 0.116114] smpboot: Total of 2 processors activated (8771.56 BogoMIPS) [ 0.117495] devtmpfs: initialized [ 0.117495] x86/mm: Memory block size: 128MB [ 0.120048] PM: Registering ACPI NVS region [mem 0xbf55ac00-0xbf55ebff] (16384 bytes) [ 0.120055] reboot: Dell OptiPlex 330 series board detected. Selecting BIOS-method for reboots. [ 0.120145] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.120145] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.120180] pinctrl core: initialized pinctrl subsystem [ 0.120331] PM: RTC time: 15:55:09, date: 2020-01-31 [ 0.120519] NET: Registered protocol family 16 [ 0.120651] audit: initializing netlink subsys (disabled) [ 0.120666] audit: type=2000 audit(1580486109.144:1): state=initialized audit_enabled=0 res=1 [ 0.120666] EISA bus registered [ 0.120666] cpuidle: using governor ladder [ 0.120666] cpuidle: using governor menu [ 0.120666] Simple Boot Flag at 0x7a set to 0x1 [ 0.120666] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.120666] ACPI: bus type PCI registered [ 0.120666] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.120666] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.120666] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.120666] PCI: Using configuration type 1 for base access [ 0.124125] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.128187] ACPI: Added _OSI(Module Device) [ 0.128188] ACPI: Added _OSI(Processor Device) [ 0.128189] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.128190] ACPI: Added _OSI(Processor Aggregator Device) [ 0.128192] ACPI: Added _OSI(Linux-Dell-Video) [ 0.128193] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.128194] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.155551] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.180196] ACPI: Interpreter enabled [ 0.180223] ACPI: (supports S0 S1 S3 S4 S5) [ 0.180225] ACPI: Using IOAPIC for interrupt routing [ 0.180309] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.180493] ACPI: Enabled 12 GPEs in block 00 to 1F [ 0.270212] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.270220] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.275039] PCI host bridge to bus 0000:00 [ 0.275043] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.275045] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.275046] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.275048] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000effff window] [ 0.275050] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window] [ 0.275051] pci_bus 0000:00: root bus resource [mem 0xbf600000-0xdfffffff window] [ 0.275053] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff window] [ 0.275055] pci_bus 0000:00: root bus resource [mem 0xff980800-0xff980bff window] [ 0.275056] pci_bus 0000:00: root bus resource [mem 0xff97c000-0xff97ffff window] [ 0.275058] pci_bus 0000:00: root bus resource [mem 0xfed20000-0xfed9ffff window] [ 0.275060] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.275074] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 [ 0.275448] pci 0000:00:01.0: [8086:29c1] type 01 class 0x060400 [ 0.275504] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.276322] pci 0000:00:02.0: [8086:29c2] type 00 class 0x030000 [ 0.276335] pci 0000:00:02.0: reg 0x10: [mem 0xdfe00000-0xdfe7ffff] [ 0.276340] pci 0000:00:02.0: reg 0x14: [io 0xecd8-0xecdf] [ 0.276346] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff pref] [ 0.276352] pci 0000:00:02.0: reg 0x1c: [mem 0xdff00000-0xdfffffff] [ 0.276728] pci 0000:00:02.1: [8086:29c3] type 00 class 0x038000 [ 0.276740] pci 0000:00:02.1: reg 0x10: [mem 0xdfe80000-0xdfefffff] [ 0.277136] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300 [ 0.277158] pci 0000:00:1b.0: reg 0x10: [mem 0xdfdfc000-0xdfdfffff 64bit] [ 0.277233] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.277579] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400 [ 0.277667] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.278044] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300 [ 0.278088] pci 0000:00:1d.0: reg 0x20: [io 0xff80-0xff9f] [ 0.278464] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300 [ 0.278508] pci 0000:00:1d.1: reg 0x20: [io 0xff60-0xff7f] [ 0.278894] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300 [ 0.278938] pci 0000:00:1d.2: reg 0x20: [io 0xff40-0xff5f] [ 0.279312] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300 [ 0.279355] pci 0000:00:1d.3: reg 0x20: [io 0xff20-0xff3f] [ 0.279735] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320 [ 0.279757] pci 0000:00:1d.7: reg 0x10: [mem 0xff980800-0xff980bff] [ 0.279837] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.280177] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 0.280596] pci 0000:00:1f.0: [8086:27b8] type 00 class 0x060100 [ 0.280682] pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO [ 0.280686] pci 0000:00:1f.0: quirk: [io 0x0880-0x08bf] claimed by ICH6 GPIO [ 0.280690] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0c00 (mask 007f) [ 0.280693] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 00e0 (mask 0007) [ 0.281067] pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a [ 0.281084] pci 0000:00:1f.1: reg 0x10: [io 0x01f0-0x01f7] [ 0.281093] pci 0000:00:1f.1: reg 0x14: [io 0x03f4-0x03f7] [ 0.281102] pci 0000:00:1f.1: reg 0x18: [io 0x0170-0x0177] [ 0.281110] pci 0000:00:1f.1: reg 0x1c: [io 0x0374-0x0377] [ 0.281119] pci 0000:00:1f.1: reg 0x20: [io 0xffa0-0xffaf] [ 0.281138] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 0.281140] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 0.281141] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 0.281143] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 0.281478] pci 0000:00:1f.2: [8086:27c1] type 00 class 0x010601 [ 0.281495] pci 0000:00:1f.2: reg 0x10: [io 0xfe00-0xfe07] [ 0.281503] pci 0000:00:1f.2: reg 0x14: [io 0xfe10-0xfe13] [ 0.281511] pci 0000:00:1f.2: reg 0x18: [io 0xfe20-0xfe27] [ 0.281518] pci 0000:00:1f.2: reg 0x1c: [io 0xfe30-0xfe33] [ 0.281526] pci 0000:00:1f.2: reg 0x20: [io 0xfec0-0xfecf] [ 0.281534] pci 0000:00:1f.2: reg 0x24: [mem 0xff970000-0xff9703ff] [ 0.281571] pci 0000:00:1f.2: PME# supported from D3hot [ 0.281904] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500 [ 0.281960] pci 0000:00:1f.3: reg 0x20: [io 0xece0-0xecff] [ 0.282370] pci 0000:01:00.0: [1102:0012] type 00 class 0x040300 [ 0.282396] pci 0000:01:00.0: reg 0x10: [mem 0xdfcf8000-0xdfcfbfff 64bit] [ 0.282410] pci 0000:01:00.0: reg 0x18: [mem 0xdfcfc000-0xdfcfffff 64bit] [ 0.282494] pci 0000:01:00.0: supports D2 [ 0.282582] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.282586] pci 0000:00:01.0: bridge window [mem 0xdfc00000-0xdfcfffff] [ 0.282654] pci 0000:02:00.0: [14e4:169b] type 00 class 0x020000 [ 0.282691] pci 0000:02:00.0: reg 0x10: [mem 0xdfbf0000-0xdfbfffff 64bit] [ 0.282840] pci 0000:02:00.0: PME# supported from D3hot D3cold [ 0.282962] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.282967] pci 0000:00:1c.0: bridge window [mem 0xdfb00000-0xdfbfffff] [ 0.282988] pci_bus 0000:03: extended config space not accessible [ 0.283047] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode) [ 0.283056] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.283058] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.283060] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.283062] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000effff window] (subtractive decode) [ 0.283064] pci 0000:00:1e.0: bridge window [mem 0x000f0000-0x000fffff window] (subtractive decode) [ 0.283066] pci 0000:00:1e.0: bridge window [mem 0xbf600000-0xdfffffff window] (subtractive decode) [ 0.283067] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfebfffff window] (subtractive decode) [ 0.283069] pci 0000:00:1e.0: bridge window [mem 0xff980800-0xff980bff window] (subtractive decode) [ 0.283071] pci 0000:00:1e.0: bridge window [mem 0xff97c000-0xff97ffff window] (subtractive decode) [ 0.283073] pci 0000:00:1e.0: bridge window [mem 0xfed20000-0xfed9ffff window] (subtractive decode) [ 0.304581] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15) [ 0.305060] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 15) [ 0.305593] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 15) [ 0.306098] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled. [ 0.306601] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12 15) [ 0.307125] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 15) [ 0.307599] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 15) [ 0.308263] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 9 10 11 12 15) [ 0.308734] iommu: Default domain type: Translated [ 0.308734] SCSI subsystem initialized [ 0.308734] libata version 3.00 loaded. [ 0.308734] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.308734] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.308734] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.308734] vgaarb: loaded [ 0.308734] ACPI: bus type USB registered [ 0.308734] usbcore: registered new interface driver usbfs [ 0.308734] usbcore: registered new interface driver hub [ 0.308734] usbcore: registered new device driver usb [ 0.308734] pps_core: LinuxPPS API ver. 1 registered [ 0.308734] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.308734] PTP clock support registered [ 0.308734] EDAC MC: Ver: 3.0.0 [ 0.308734] PCI: Using ACPI for IRQ routing [ 0.315716] PCI: pci_cache_line_size set to 64 bytes [ 0.315746] pci 0000:00:1f.2: can't claim BAR 5 [mem 0xff970000-0xff9703ff]: no compatible bridge window [ 0.315768] Expanded resource Reserved due to conflict with PCI Bus 0000:00 [ 0.315770] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 0.315772] e820: reserve RAM buffer [mem 0xbf55ac00-0xbfffffff] [ 0.316010] NetLabel: Initializing [ 0.316010] NetLabel: domain hash size = 128 [ 0.316010] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.316010] NetLabel: unlabeled traffic allowed by default [ 0.317149] hpet: 3 channels of 0 reserved for per-cpu timers [ 0.317154] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.317159] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.320016] clocksource: Switched to clocksource tsc-early [ 0.342989] *** VALIDATE bpf *** [ 0.343149] VFS: Disk quotas dquot_6.6.0 [ 0.343180] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.343221] *** VALIDATE ramfs *** [ 0.343226] *** VALIDATE hugetlbfs *** [ 0.343382] AppArmor: AppArmor Filesystem Enabled [ 0.343427] pnp: PnP ACPI init [ 0.347449] pnp 00:00: disabling [io 0x0800-0x085f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x0800-0x087f] [ 0.347452] pnp 00:00: disabling [io 0x0860-0x08ff] because it overlaps 0000:00:1f.0 BAR 13 [io 0x0800-0x087f] [ 0.347498] system 00:00: [io 0x0c00-0x0c7f] has been reserved [ 0.347506] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.347696] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.359745] pnp 00:02: [dma 0 disabled] [ 0.360774] pnp 00:02: Plug and Play ACPI device, IDs PNP0401 (active) [ 0.364567] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.374456] pnp: PnP ACPI: found 4 devices [ 0.376686] thermal_sys: Registered thermal governor 'fair_share' [ 0.376687] thermal_sys: Registered thermal governor 'bang_bang' [ 0.376688] thermal_sys: Registered thermal governor 'step_wise' [ 0.376689] thermal_sys: Registered thermal governor 'user_space' [ 0.376690] thermal_sys: Registered thermal governor 'power_allocator' [ 0.381191] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.381248] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000 [ 0.381251] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000 [ 0.381266] pci 0000:00:1c.0: BAR 15: assigned [mem 0xd0000000-0xd01fffff 64bit pref] [ 0.381269] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff] [ 0.381273] pci 0000:00:1f.2: BAR 5: assigned [mem 0xd0200000-0xd02003ff] [ 0.381279] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.381283] pci 0000:00:01.0: bridge window [mem 0xdfc00000-0xdfcfffff] [ 0.381289] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.381291] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] [ 0.381296] pci 0000:00:1c.0: bridge window [mem 0xdfb00000-0xdfbfffff] [ 0.381299] pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xd01fffff 64bit pref] [ 0.381305] pci 0000:00:1e.0: PCI bridge to [bus 03] [ 0.381316] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.381318] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.381320] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.381322] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000effff window] [ 0.381323] pci_bus 0000:00: resource 8 [mem 0x000f0000-0x000fffff window] [ 0.381325] pci_bus 0000:00: resource 9 [mem 0xbf600000-0xdfffffff window] [ 0.381327] pci_bus 0000:00: resource 10 [mem 0xf0000000-0xfebfffff window] [ 0.381328] pci_bus 0000:00: resource 11 [mem 0xff980800-0xff980bff window] [ 0.381330] pci_bus 0000:00: resource 12 [mem 0xff97c000-0xff97ffff window] [ 0.381332] pci_bus 0000:00: resource 13 [mem 0xfed20000-0xfed9ffff window] [ 0.381334] pci_bus 0000:01: resource 1 [mem 0xdfc00000-0xdfcfffff] [ 0.381335] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff] [ 0.381337] pci_bus 0000:02: resource 1 [mem 0xdfb00000-0xdfbfffff] [ 0.381339] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd01fffff 64bit pref] [ 0.381341] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window] [ 0.381342] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window] [ 0.381344] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.381346] pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000effff window] [ 0.381348] pci_bus 0000:03: resource 8 [mem 0x000f0000-0x000fffff window] [ 0.381349] pci_bus 0000:03: resource 9 [mem 0xbf600000-0xdfffffff window] [ 0.381351] pci_bus 0000:03: resource 10 [mem 0xf0000000-0xfebfffff window] [ 0.381353] pci_bus 0000:03: resource 11 [mem 0xff980800-0xff980bff window] [ 0.381355] pci_bus 0000:03: resource 12 [mem 0xff97c000-0xff97ffff window] [ 0.381356] pci_bus 0000:03: resource 13 [mem 0xfed20000-0xfed9ffff window] [ 0.381448] NET: Registered protocol family 2 [ 0.381768] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear) [ 0.381856] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.382054] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear) [ 0.382137] TCP: Hash tables configured (established 32768 bind 32768) [ 0.382231] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.382262] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.382337] NET: Registered protocol family 1 [ 0.382344] NET: Registered protocol family 44 [ 0.382364] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.385214] PCI: CLS 64 bytes, default 64 [ 0.385298] Trying to unpack rootfs image as initramfs... [ 0.711470] Freeing initrd memory: 47556K [ 0.711559] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.711562] software IO TLB: mapped [mem 0xbb55a000-0xbf55a000] (64MB) [ 0.711773] check: Scanning for low memory corruption every 60 seconds [ 0.712504] Initialise system trusted keyrings [ 0.712520] Key type blacklist registered [ 0.712606] workingset: timestamp_bits=36 max_order=20 bucket_order=0 [ 0.715062] zbud: loaded [ 0.715646] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.715929] fuse: init (API version 7.31) [ 0.715961] *** VALIDATE fuse *** [ 0.715963] *** VALIDATE fuse *** [ 0.716125] Platform Keyring initialized [ 0.723218] Key type asymmetric registered [ 0.723220] Asymmetric key parser 'x509' registered [ 0.723243] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) [ 0.723346] io scheduler mq-deadline registered [ 0.724388] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.724478] vesafb: mode is 1280x1024x32, linelength=5120, pages=0 [ 0.724479] vesafb: scrolling: redraw [ 0.724481] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.724503] vesafb: framebuffer at 0xc0000000, mapped to 0x(____ptrval____), using 5120k, total 5120k [ 0.724574] fbcon: Deferring console take-over [ 0.724575] fb0: VESA VGA frame buffer device [ 0.724593] intel_idle: does not run on family 6 model 15 [ 0.724705] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.724759] ACPI: Power Button [VBTN] [ 0.724835] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.724876] ACPI: Power Button [PWRF] [ 0.725236] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.745673] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.748285] Linux agpgart interface v0.103 [ 0.752004] loop: module loaded [ 0.752264] ata_piix 0000:00:1f.1: version 2.13 [ 0.753048] scsi host0: ata_piix [ 0.753219] scsi host1: ata_piix [ 0.753281] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 0.753283] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 0.753330] ata1: port disabled--ignoring [ 0.753361] ata2: port disabled--ignoring [ 0.753457] libphy: Fixed MDIO Bus: probed [ 0.753458] tun: Universal TUN/TAP device driver, 1.6 [ 0.753522] PPP generic driver version 2.4.2 [ 0.753606] VFIO - User Level meta-driver version: 0.3 [ 0.753682] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.753687] ehci-pci: EHCI PCI platform driver [ 0.754042] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 0.754050] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 0.754063] ehci-pci 0000:00:1d.7: debug port 1 [ 0.757971] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported [ 0.757989] ehci-pci 0000:00:1d.7: irq 21, io mem 0xff980800 [ 0.772860] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.772961] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 0.772964] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.772965] usb usb1: Product: EHCI Host Controller [ 0.772967] usb usb1: Manufacturer: Linux 5.4.0-12-generic ehci_hcd [ 0.772969] usb usb1: SerialNumber: 0000:00:1d.7 [ 0.773111] hub 1-0:1.0: USB hub found [ 0.773121] hub 1-0:1.0: 8 ports detected [ 0.773405] ehci-platform: EHCI generic platform driver [ 0.773419] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.773422] ohci-pci: OHCI PCI platform driver [ 0.773435] ohci-platform: OHCI generic platform driver [ 0.773443] uhci_hcd: USB Universal Host Controller Interface driver [ 0.773750] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.773757] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.773763] uhci_hcd 0000:00:1d.0: detected 2 ports [ 0.773781] uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000ff80 [ 0.773852] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04 [ 0.773854] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.773856] usb usb2: Product: UHCI Host Controller [ 0.773857] usb usb2: Manufacturer: Linux 5.4.0-12-generic uhci_hcd [ 0.773859] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.773974] hub 2-0:1.0: USB hub found [ 0.773983] hub 2-0:1.0: 2 ports detected [ 0.774406] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.774412] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.774428] uhci_hcd 0000:00:1d.1: detected 2 ports [ 0.774453] uhci_hcd 0000:00:1d.1: irq 22, io base 0x0000ff60 [ 0.774510] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04 [ 0.774513] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.774514] usb usb3: Product: UHCI Host Controller [ 0.774516] usb usb3: Manufacturer: Linux 5.4.0-12-generic uhci_hcd [ 0.774518] usb usb3: SerialNumber: 0000:00:1d.1 [ 0.774628] hub 3-0:1.0: USB hub found [ 0.774637] hub 3-0:1.0: 2 ports detected [ 0.775059] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.775065] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 0.775070] uhci_hcd 0000:00:1d.2: detected 2 ports [ 0.775097] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40 [ 0.775155] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04 [ 0.775157] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.775159] usb usb4: Product: UHCI Host Controller [ 0.775160] usb usb4: Manufacturer: Linux 5.4.0-12-generic uhci_hcd [ 0.775162] usb usb4: SerialNumber: 0000:00:1d.2 [ 0.775272] hub 4-0:1.0: USB hub found [ 0.775280] hub 4-0:1.0: 2 ports detected [ 0.775703] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 0.775708] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 0.775714] uhci_hcd 0000:00:1d.3: detected 2 ports [ 0.775741] uhci_hcd 0000:00:1d.3: irq 23, io base 0x0000ff20 [ 0.775809] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04 [ 0.775811] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.775813] usb usb5: Product: UHCI Host Controller [ 0.775814] usb usb5: Manufacturer: Linux 5.4.0-12-generic uhci_hcd [ 0.775816] usb usb5: SerialNumber: 0000:00:1d.3 [ 0.775927] hub 5-0:1.0: USB hub found [ 0.775935] hub 5-0:1.0: 2 ports detected [ 0.776132] i8042: PNP: No PS/2 controller found. [ 0.776133] i8042: Probing ports directly. [ 0.778996] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.779002] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.779146] mousedev: PS/2 mouse device common for all mice [ 0.779316] rtc_cmos 00:01: RTC can wake from S4 [ 0.779477] rtc_cmos 00:01: registered as rtc0 [ 0.779499] rtc_cmos 00:01: alarms up to one day, 242 bytes nvram, hpet irqs [ 0.779507] i2c /dev entries driver [ 0.779579] device-mapper: uevent: version 1.0.3 [ 0.779664] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com [ 0.779694] platform eisa.0: Probing EISA bus 0 [ 0.779697] platform eisa.0: EISA: Cannot allocate resource for mainboard [ 0.779699] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 0.779700] platform eisa.0: Cannot allocate resource for EISA slot 2 [ 0.779702] platform eisa.0: Cannot allocate resource for EISA slot 3 [ 0.779704] platform eisa.0: Cannot allocate resource for EISA slot 4 [ 0.779705] platform eisa.0: Cannot allocate resource for EISA slot 5 [ 0.779707] platform eisa.0: Cannot allocate resource for EISA slot 6 [ 0.779709] platform eisa.0: Cannot allocate resource for EISA slot 7 [ 0.779710] platform eisa.0: Cannot allocate resource for EISA slot 8 [ 0.779712] platform eisa.0: EISA: Detected 0 cards [ 0.779716] intel_pstate: CPU model not supported [ 0.779741] ledtrig-cpu: registered to indicate activity on CPUs [ 0.779836] drop_monitor: Initializing network drop monitor service [ 0.780122] NET: Registered protocol family 10 [ 0.794458] Segment Routing with IPv6 [ 0.794507] NET: Registered protocol family 17 [ 0.794577] Key type dns_resolver registered [ 0.794823] RAS: Correctable Errors collector initialized. [ 0.794878] microcode: sig=0x6fd, pf=0x1, revision=0xa4 [ 0.794927] microcode: Microcode Update Driver: v2.2. [ 0.794932] IPI shorthand broadcast: enabled [ 0.794941] sched_clock: Marking stable (818912327, -23991573)->(795860977, -940223) [ 0.795029] registered taskstats version 1 [ 0.795047] Loading compiled-in X.509 certificates [ 0.798700] Loaded X.509 cert 'Build time autogenerated kernel key: b859a3f0d1fb97c048eb1e12333684e1db3073ca' [ 0.798764] zswap: loaded using pool lzo/zbud [ 0.798880] Key type ._fscrypt registered [ 0.798881] Key type .fscrypt registered [ 0.812586] Key type big_key registered [ 0.819416] Key type encrypted registered [ 0.819425] AppArmor: AppArmor sha1 policy hashing enabled [ 0.819436] ima: No TPM chip found, activating TPM-bypass! [ 0.819445] ima: Allocated hash algorithm: sha1 [ 0.819455] ima: No architecture policies found [ 0.819468] evm: Initialising EVM extended attributes: [ 0.819469] evm: security.selinux [ 0.819469] evm: security.SMACK64 [ 0.819470] evm: security.SMACK64EXEC [ 0.819471] evm: security.SMACK64TRANSMUTE [ 0.819472] evm: security.SMACK64MMAP [ 0.819472] evm: security.apparmor [ 0.819473] evm: security.ima [ 0.819474] evm: security.capability [ 0.819475] evm: HMAC attrs: 0x1 [ 0.820015] PM: Magic number: 4:780:943 [ 0.820076] tty tty0: hash matches [ 0.820078] tty console: hash matches [ 0.820159] rtc_cmos 00:01: setting system clock to 2020-01-31T15:55:10 UTC (1580486110) [ 0.823264] Freeing unused decrypted memory: 2040K [ 0.824662] Freeing unused kernel image memory: 2680K [ 0.836983] Write protecting the kernel read-only data: 22528k [ 0.838211] Freeing unused kernel image memory: 2008K [ 0.838881] Freeing unused kernel image memory: 1224K [ 0.855642] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 0.855660] x86/mm: Checking user space page tables [ 0.872271] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 0.872277] Run /init as init process [ 1.015866] tg3.c:v3.137 (May 11, 2014) [ 1.017213] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x0000000000000828-0x000000000000082D (\GLBC) (20190816/utaddress-204) [ 1.017220] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x000000000000082A-0x000000000000082A (\SACT) (20190816/utaddress-204) [ 1.017224] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x0000000000000828-0x0000000000000828 (\SSTS) (20190816/utaddress-204) [ 1.017228] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 1.017267] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 1.023945] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 1.024060] ahci 0000:00:1f.2: version 3.0 [ 1.025352] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 1.025356] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part [ 1.038840] scsi host2: ahci [ 1.046513] scsi host3: ahci [ 1.054518] scsi host4: ahci [ 1.061922] scsi host5: ahci [ 1.062038] ata3: SATA max UDMA/133 abar m1024@0xd0200000 port 0xd0200100 irq 26 [ 1.062041] ata4: SATA max UDMA/133 abar m1024@0xd0200000 port 0xd0200180 irq 26 [ 1.062043] ata5: SATA max UDMA/133 abar m1024@0xd0200000 port 0xd0200200 irq 26 [ 1.062045] ata6: SATA max UDMA/133 abar m1024@0xd0200000 port 0xd0200280 irq 26 [ 1.069486] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95787) rev b002] (PCI Express) MAC address 00:1d:09:22:8f:6e [ 1.069490] tg3 0000:02:00.0 eth0: attached PHY is 5787 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) [ 1.069492] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 1.069494] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 1.108914] tg3 0000:02:00.0 enp2s0: renamed from eth0 [ 1.133574] gpio_ich gpio_ich.1.auto: GPIO from 462 to 511 [ 1.228042] usb 2-1: new low-speed USB device number 2 using uhci_hcd [ 1.374578] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.374601] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.374622] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.375900] ata4.00: ATA-6: ST340014AS, 8.12, max UDMA/133 [ 1.375904] ata4.00: 78125000 sectors, multi 8: LBA48 NCQ (depth 32) [ 1.375916] ata5.00: ATA-9: HGST HTS545050A7E680, GR2OA350, max UDMA/133 [ 1.375920] ata5.00: 976773168 sectors, multi 8: LBA48 NCQ (depth 32), AA [ 1.377306] ata5.00: configured for UDMA/133 [ 1.377382] ata4.00: configured for UDMA/133 [ 1.380952] ata3.00: ATA-8: SAMSUNG HD161GJ, 1AC01118, max UDMA/100 [ 1.380955] ata3.00: 312581808 sectors, multi 8: LBA48 NCQ (depth 32), AA [ 1.382530] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.383936] ata6.00: ATA-8: Hitachi HTS547550A9E384, JE3OA50A, max UDMA/100 [ 1.383939] ata6.00: 976773168 sectors, multi 8: LBA48 NCQ (depth 32), AA [ 1.385405] ata6.00: configured for UDMA/100 [ 1.387346] ata3.00: configured for UDMA/100 [ 1.387526] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD161GJ 1118 PQ: 0 ANSI: 5 [ 1.387820] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 1.387944] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 1.387960] sd 2:0:0:0: [sda] Write Protect is off [ 1.387963] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.387989] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.387990] scsi 3:0:0:0: Direct-Access ATA ST340014AS 8.12 PQ: 0 ANSI: 5 [ 1.388179] scsi 3:0:0:0: Attached scsi generic sg1 type 0 [ 1.388318] scsi 4:0:0:0: Direct-Access ATA HGST HTS545050A7 A350 PQ: 0 ANSI: 5 [ 1.388335] sd 3:0:0:0: [sdb] 78125000 512-byte logical blocks: (40.0 GB/37.3 GiB) [ 1.388350] sd 3:0:0:0: [sdb] Write Protect is off [ 1.388352] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.388379] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.388537] sd 4:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 1.388539] sd 4:0:0:0: [sdc] 4096-byte physical blocks [ 1.388551] sd 4:0:0:0: [sdc] Write Protect is off [ 1.388553] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 1.388573] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.388999] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 1.389142] scsi 5:0:0:0: Direct-Access ATA Hitachi HTS54755 A50A PQ: 0 ANSI: 5 [ 1.389337] scsi 5:0:0:0: Attached scsi generic sg3 type 0 [ 1.389490] sd 5:0:0:0: [sdd] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 1.389492] sd 5:0:0:0: [sdd] 4096-byte physical blocks [ 1.389506] sd 5:0:0:0: [sdd] Write Protect is off [ 1.389525] sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 1.389565] sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.419991] sda: sda1 [ 1.420541] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.423535] usb 2-1: New USB device found, idVendor=046d, idProduct=c077, bcdDevice=72.00 [ 1.423539] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.423542] usb 2-1: Product: USB Optical Mouse [ 1.423546] usb 2-1: Manufacturer: Logitech [ 1.424889] sdb: sdb1 [ 1.425382] sd 3:0:0:0: [sdb] Attached SCSI disk [ 1.432898] hidraw: raw HID events driver (C) Jiri Kosina [ 1.445610] sdd: sdd1 sdd2 [ 1.446207] sd 5:0:0:0: [sdd] Attached SCSI disk [ 1.447817] usbcore: registered new interface driver usbhid [ 1.447818] usbhid: USB HID core driver [ 1.451632] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/0003:046D:C077.0001/input/input5 [ 1.451775] hid-generic 0003:046D:C077.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1/input0 [ 1.465686] sdc: sdc1 sdc2 < sdc5 > [ 1.466351] sd 4:0:0:0: [sdc] Attached SCSI disk [ 1.647197] random: fast init done [ 1.667821] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.667838] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.667988] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.736100] tsc: Refined TSC clocksource calibration: 2192.903 MHz [ 1.736112] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1f9c028c683, max_idle_ns: 440795281442 ns [ 1.736134] clocksource: Switched to clocksource tsc [ 2.140042] usb 2-2: new full-speed USB device number 3 using uhci_hcd [ 2.306535] usb 2-2: config 1 interface 1 altsetting 0 endpoint 0x83 has wMaxPacketSize 0, skipping [ 2.306539] usb 2-2: config 1 interface 1 altsetting 0 endpoint 0x3 has wMaxPacketSize 0, skipping [ 2.306546] usb 2-2: New USB device found, idVendor=0a12, idProduct=0001, bcdDevice= 1.34 [ 2.306550] usb 2-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.888038] usb 4-2: new low-speed USB device number 2 using uhci_hcd [ 3.085057] usb 4-2: New USB device found, idVendor=03f0, idProduct=0024, bcdDevice= 3.00 [ 3.085061] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.085064] usb 4-2: Product: HP Basic USB Keyboard [ 3.085067] usb 4-2: Manufacturer: CHICONY [ 3.103692] input: CHICONY HP Basic USB Keyboard as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/0003:03F0:0024.0002/input/input6 [ 3.160178] hid-generic 0003:03F0:0024.0002: input,hidraw1: USB HID v1.10 Keyboard [CHICONY HP Basic USB Keyboard] on usb-0000:00:1d.2-2/input0 [ 4.014834] fbcon: Taking over console [ 4.014981] Console: switching to colour frame buffer device 160x64 [ 4.079113] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 4.123418] random: crng init done [ 4.123421] random: 7 urandom warning(s) missed due to ratelimiting [ 5.732716] systemd[1]: Inserted module 'autofs4' [ 5.916584] systemd[1]: systemd 244.1-0ubuntu2 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 5.936141] systemd[1]: Detected architecture x86-64. [ 5.969972] systemd[1]: Set hostname to . [ 7.764363] systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly. [ 8.188100] systemd[1]: Created slice User and Session Slice. [ 8.188247] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.188581] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.188651] systemd[1]: Reached target User and Group Name Lookups. [ 8.188674] systemd[1]: Reached target Remote File Systems. [ 8.188694] systemd[1]: Reached target Slices. [ 8.205545] systemd[1]: Listening on Syslog Socket. [ 8.205686] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.205768] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.206070] systemd[1]: Listening on Journal Audit Socket. [ 8.206210] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.206382] systemd[1]: Listening on Journal Socket. [ 8.206558] systemd[1]: Listening on udev Control Socket. [ 8.206665] systemd[1]: Listening on udev Kernel Socket. [ 8.208500] systemd[1]: Mounting Huge Pages File System... [ 8.210409] systemd[1]: Mounting POSIX Message Queue File System... [ 8.212568] systemd[1]: Mounting Kernel Debug File System... [ 8.215086] systemd[1]: Starting Journal Service... [ 8.217167] systemd[1]: Starting Set the console keyboard layout... [ 8.219533] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.311281] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.311352] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.380593] systemd[1]: Starting Load Kernel Modules... [ 8.382273] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.384647] systemd[1]: Starting udev Coldplug all Devices... [ 8.386472] systemd[1]: Starting Uncomplicated firewall... [ 8.391610] systemd[1]: Mounted Huge Pages File System. [ 8.391836] systemd[1]: Mounted POSIX Message Queue File System. [ 8.392077] systemd[1]: Mounted Kernel Debug File System. [ 8.392877] systemd[1]: Started Create list of static device nodes for the current kernel. [ 8.484705] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 8.488135] systemd[1]: Started Remount Root and Kernel File Systems. [ 8.526671] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.528261] systemd[1]: Starting Load/Save Random Seed... [ 8.529933] systemd[1]: Starting Create System Users... [ 8.531332] systemd[1]: Started Uncomplicated firewall. [ 8.717430] systemd[1]: Started Set the console keyboard layout. [ 8.770710] systemd[1]: Started udev Coldplug all Devices. [ 8.794052] lp: driver loaded but no devices found [ 8.823019] ppdev: user-space parallel port driver [ 8.886351] systemd[1]: Started Load/Save Random Seed. [ 8.905419] parport_pc 00:02: reported by Plug and Play ACPI [ 8.905496] parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,EPP,ECP] [ 9.000208] lp0: using parport0 (interrupt-driven). [ 9.017178] systemd[1]: Started Load Kernel Modules. [ 9.019067] systemd[1]: Mounting FUSE Control File System... [ 9.020988] systemd[1]: Mounting Kernel Configuration File System... [ 9.023371] systemd[1]: Starting Apply Kernel Variables... [ 9.031744] systemd[1]: Started Create System Users. [ 9.032143] systemd[1]: Mounted FUSE Control File System. [ 9.033877] systemd[1]: Starting Create Static Device Nodes in /dev... [ 9.038317] systemd[1]: Mounted Kernel Configuration File System. [ 9.100203] systemd[1]: Started Journal Service. [ 9.180715] systemd-journald[305]: Received client request to flush runtime journal. [ 11.549220] audit: type=1400 audit(1580486121.227:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=366 comm="apparmor_parser" [ 11.579020] audit: type=1400 audit(1580486121.255:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=367 comm="apparmor_parser" [ 11.717224] audit: type=1400 audit(1580486121.391:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=368 comm="apparmor_parser" [ 11.717230] audit: type=1400 audit(1580486121.391:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=368 comm="apparmor_parser" [ 11.885574] audit: type=1400 audit(1580486121.559:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=370 comm="apparmor_parser" [ 11.969154] audit: type=1400 audit(1580486121.643:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=371 comm="apparmor_parser" [ 12.060111] audit: type=1400 audit(1580486121.735:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=372 comm="apparmor_parser" [ 12.060117] audit: type=1400 audit(1580486121.735:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=372 comm="apparmor_parser" [ 12.060121] audit: type=1400 audit(1580486121.735:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=372 comm="apparmor_parser" [ 12.343972] audit: type=1400 audit(1580486122.015:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=375 comm="apparmor_parser" [ 15.120925] intel_rng: Firmware space is locked read-only. If you can't or intel_rng: don't want to disable this in firmware setup, and if intel_rng: you are certain that your system has a functional intel_rng: RNG, try using the 'no_fwh_detect' option. [ 15.289566] leds_ss4200: no LED devices found [ 17.051669] pci 0000:00:00.0: Intel G33 Chipset [ 17.051685] pci 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable [ 17.052150] pci 0000:00:00.0: detected 8192K stolen memory [ 17.053395] checking generic (c0000000 500000) vs hw (c0000000 10000000) [ 17.053397] fb0: switching to inteldrmfb from VESA VGA [ 17.054494] Console: switching to colour dummy device 80x25 [ 17.054589] i915 0000:00:02.0: vgaarb: deactivate vga console [ 17.059493] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 17.059496] [drm] Driver supports precise vblank timestamp query. [ 17.060448] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 17.066485] [drm] RC6 disabled, disabling runtime PM support [ 17.066661] [drm] Initialized overlay support. [ 17.066978] [drm] Initialized i915 1.6.0 20190822 for 0000:00:02.0 on minor 0 [ 17.102487] fbcon: i915drmfb (fb0) is primary device [ 17.102585] Console: switching to colour frame buffer device 160x64 [ 17.102626] i915 0000:00:02.0: fb0: i915drmfb frame buffer device [ 17.311366] coretemp coretemp.0: Using relative temperature scale! [ 17.315210] coretemp coretemp.0: Using relative temperature scale! [ 17.554037] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.3) [ 17.557928] intel_powerclamp: No package C-state available [ 17.584650] intel_powerclamp: No package C-state available [ 17.766107] Bluetooth: Core ver 2.22 [ 17.766138] NET: Registered protocol family 31 [ 17.766139] Bluetooth: HCI device and connection manager initialized [ 17.766146] Bluetooth: HCI socket layer initialized [ 17.766149] Bluetooth: L2CAP socket layer initialized [ 17.766154] Bluetooth: SCO socket layer initialized [ 18.694363] snd_hda_intel 0000:01:00.0: Disabling MSI [ 18.694366] snd_hda_intel 0000:01:00.0: Force to non-snoop mode [ 18.715589] usbcore: registered new interface driver btusb [ 18.838380] snd_hda_codec_ca0132 hdaudioC1D1: autoconfig for CA0132: line_outs=1 (0xb/0x0/0x0/0x0/0x0) type:line [ 18.838384] snd_hda_codec_ca0132 hdaudioC1D1: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 18.838386] snd_hda_codec_ca0132 hdaudioC1D1: hp_outs=1 (0x10/0x0/0x0/0x0/0x0) [ 18.838388] snd_hda_codec_ca0132 hdaudioC1D1: mono: mono_out=0x0 [ 18.838389] snd_hda_codec_ca0132 hdaudioC1D1: dig-out=0xc/0x0 [ 18.838391] snd_hda_codec_ca0132 hdaudioC1D1: inputs: [ 18.838393] snd_hda_codec_ca0132 hdaudioC1D1: Mic=0x12 [ 18.838395] snd_hda_codec_ca0132 hdaudioC1D1: Line=0x11 [ 18.838396] snd_hda_codec_ca0132 hdaudioC1D1: dig-in=0xe [ 19.405410] snd_hda_codec_analog hdaudioC0D0: autoconfig for AD1984: line_outs=1 (0x12/0x0/0x0/0x0/0x0) type:line [ 19.405415] snd_hda_codec_analog hdaudioC0D0: speaker_outs=1 (0x13/0x0/0x0/0x0/0x0) [ 19.405417] snd_hda_codec_analog hdaudioC0D0: hp_outs=1 (0x11/0x0/0x0/0x0/0x0) [ 19.405419] snd_hda_codec_analog hdaudioC0D0: mono: mono_out=0x0 [ 19.405420] snd_hda_codec_analog hdaudioC0D0: inputs: [ 19.405422] snd_hda_codec_analog hdaudioC0D0: Mic=0x14 [ 19.405424] snd_hda_codec_analog hdaudioC0D0: Line=0x15 [ 19.414529] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [ 19.414613] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 19.414687] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 19.414759] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 19.612259] snd_hda_codec_ca0132 hdaudioC1D1: ca0132 DSP downloaded and running [ 19.874535] input: HDA Creative Front Line Out as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/sound/card1/input11 [ 19.874620] input: HDA Creative Line Out as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/sound/card1/input12 [ 19.874696] input: HDA Creative Front Headphone as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/sound/card1/input13 [ 22.248158] Adding 4115452k swap on /dev/sdc5. Priority:-2 extents:1 across:4115452k FS [ 31.381103] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 31.381106] Bluetooth: BNEP filters: protocol multicast [ 31.381113] Bluetooth: BNEP socket layer initialized [ 37.312239] tg3 0000:02:00.0 enp2s0: Link is up at 1000 Mbps, full duplex [ 37.312252] tg3 0000:02:00.0 enp2s0: Flow control is off for TX and off for RX [ 37.312276] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready [ 67.885003] rfkill: input handler disabled [ 357.473227] perf: interrupt took too long (2506 > 2500), lowering kernel.perf_event_max_sample_rate to 79750 [ 573.511243] perf: interrupt took too long (3133 > 3132), lowering kernel.perf_event_max_sample_rate to 63750 [ 648.415757] perf: interrupt took too long (3923 > 3916), lowering kernel.perf_event_max_sample_rate to 50750 [ 1003.334305] perf: interrupt took too long (4923 > 4903), lowering kernel.perf_event_max_sample_rate to 40500