[ 0.000000] random: get_random_bytes called from start_kernel+0x42/0x4e1 with crng_init=0 [ 0.000000] Linux version 4.13.0-16-generic (buildd@lcy01-02) (gcc version 7.2.0 (Ubuntu 7.2.0-8ubuntu2)) #19-Ubuntu SMP Wed Oct 11 18:35:14 UTC 2017 (Ubuntu 4.13.0-16.19-generic 4.13.4) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.13.0-16-generic root=UUID=67f4490b-8923-4c29-88cf-43bcb1f7ea90 ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: x87 FPU will use FXSAVE [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cffdffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cffe0000-0x00000000cffe2fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000cffe3000-0x00000000cffeffff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000cfff0000-0x00000000cfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000012fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] random: fast init done [ 0.000000] SMBIOS 2.5 present. [ 0.000000] DMI: BIOSTAR Group A780X-A2/A770 A2+, BIOS 6.00 PG 10/01/2008 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] AGP: No AGP bridge found [ 0.000000] e820: last_pfn = 0x130000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FF80000000 write-back [ 0.000000] 1 base 0080000000 mask FFC0000000 write-back [ 0.000000] 2 base 00C0000000 mask FFF0000000 write-back [ 0.000000] 3 base 0100000000 mask FFE0000000 write-back [ 0.000000] 4 base 0120000000 mask FFF0000000 write-back [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000130000000 aka 4864M [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xcffe0 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000f3e40-0x000f3e4f] mapped at [ffff900dc00f3e40] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff900dc0099000] 99000 size 24576 [ 0.000000] BRK [0xc4123000, 0xc4123fff] PGTABLE [ 0.000000] BRK [0xc4124000, 0xc4124fff] PGTABLE [ 0.000000] BRK [0xc4125000, 0xc4125fff] PGTABLE [ 0.000000] BRK [0xc4126000, 0xc4126fff] PGTABLE [ 0.000000] BRK [0xc4127000, 0xc4127fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x320db000-0x35064fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F7EF0 000024 (v02 RX780 ) [ 0.000000] ACPI: XSDT 0x00000000CFFE3080 00004C (v01 RX780 AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: FACP 0x00000000CFFE8C80 0000F4 (v03 RX780 AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aEventBlock: 32/8 (20170531/tbfadt-603) [ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aControlBlock: 16/8 (20170531/tbfadt-603) [ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/PmTimerBlock: 32/8 (20170531/tbfadt-603) [ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/8 (20170531/tbfadt-603) [ 0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aEventBlock: 8, using default 32 (20170531/tbfadt-708) [ 0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock: 8, using default 16 (20170531/tbfadt-708) [ 0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/PmTimerBlock: 8, using default 32 (20170531/tbfadt-708) [ 0.000000] ACPI: DSDT 0x00000000CFFE3200 005A71 (v01 RX780 AWRDACPI 00001000 MSFT 0100000E) [ 0.000000] ACPI: FACS 0x00000000CFFE0000 000040 [ 0.000000] ACPI: FACS 0x00000000CFFE0000 000040 [ 0.000000] ACPI: SSDT 0x00000000CFFE8E40 000350 (v01 PTLTD POWERNOW 00000001 LTP 00000001) [ 0.000000] ACPI: HPET 0x00000000CFFE91C0 000038 (v01 RX780 AWRDACPI 42302E31 AWRD 00000098) [ 0.000000] ACPI: MCFG 0x00000000CFFE9200 00003C (v01 RX780 AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: APIC 0x00000000CFFE8D80 000084 (v01 RX780 AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000012fffffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x12ffd1000-0x12fffbfff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000012fffffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000cffdffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000012fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000012fffffff] [ 0.000000] On node 0 totalpages: 1048446 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 13248 pages used for memmap [ 0.000000] DMA32 zone: 847840 pages, LIFO batch:31 [ 0.000000] Normal zone: 3072 pages used for memmap [ 0.000000] Normal zone: 196608 pages, LIFO batch:31 [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xcffe0000-0xcffe2fff] [ 0.000000] PM: Registered nosave memory: [mem 0xcffe3000-0xcffeffff] [ 0.000000] PM: Registered nosave memory: [mem 0xcfff0000-0xcfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xffffffff] [ 0.000000] e820: [mem 0xd0000000-0xdfffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] percpu: Embedded 39 pages/cpu @ffff900eefc00000 s119704 r8192 d31848 u524288 [ 0.000000] pcpu-alloc: s119704 r8192 d31848 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1032041 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.13.0-16-generic root=UUID=67f4490b-8923-4c29-88cf-43bcb1f7ea90 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] AGP: Checking aperture... [ 0.000000] AGP: No AGP bridge found [ 0.000000] AGP: Node 0: aperture [bus addr 0x2bbe000000-0x2bbfffffff] (32MB) [ 0.000000] Aperture beyond 4GB. Ignoring. [ 0.000000] AGP: Your BIOS doesn't leave an aperture memory hole [ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup [ 0.000000] AGP: This costs you 64MB of RAM [ 0.000000] AGP: Mapping aperture over RAM [mem 0xbc000000-0xbfffffff] (65536KB) [ 0.000000] PM: Registered nosave memory: [mem 0xbc000000-0xbfffffff] [ 0.000000] Memory: 3925432K/4193784K available (9281K kernel code, 2477K rwdata, 3992K rodata, 2324K init, 2384K bss, 268352K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 37719 entries in 148 pages [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.000000] Tasks RCU enabled. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.004000] tsc: Detected 3100.216 MHz processor [ 0.004000] tsc: Marking TSC unstable due to TSCs unsynchronized [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6200.43 BogoMIPS (lpj=12400864) [ 0.004000] pid_max: default: 32768 minimum: 301 [ 0.004000] ACPI: Core revision 20170531 [ 0.008194] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.008247] Security Framework initialized [ 0.008249] Yama: becoming mindful. [ 0.008272] AppArmor: AppArmor initialized [ 0.009931] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.010803] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.010846] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.010875] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.011105] CPU: Physical Processor ID: 0 [ 0.011106] CPU: Processor Core ID: 0 [ 0.011108] mce: CPU supports 5 MCE banks [ 0.011114] LVT offset 0 assigned for vector 0xf9 [ 0.011116] process: using AMD E400 aware idle routine [ 0.011118] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4 [ 0.011119] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0 [ 0.011251] Freeing SMP alternatives memory: 36K [ 0.016013] process: System has AMD C1E enabled [ 0.016142] smpboot: Max logical packages: 2 [ 0.016741] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.064000] process: Switch to broadcast mode on CPU0 [ 0.064000] smpboot: CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ (family: 0xf, model: 0x6b, stepping: 0x2) [ 0.064000] Performance Events: AMD PMU driver. [ 0.064000] ... version: 0 [ 0.064000] ... bit width: 48 [ 0.064000] ... generic registers: 4 [ 0.064000] ... value mask: 0000ffffffffffff [ 0.064000] ... max period: 00007fffffffffff [ 0.064000] ... fixed-purpose events: 0 [ 0.064000] ... event mask: 000000000000000f [ 0.064000] Hierarchical SRCU implementation. [ 0.064000] smp: Bringing up secondary CPUs ... [ 0.064000] x86: Booting SMP configuration: [ 0.064000] .... node #0, CPUs: #1 [ 0.064151] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.004000] process: Switch to broadcast mode on CPU1 [ 0.140035] smp: Brought up 1 node, 2 CPUs [ 0.140035] smpboot: Total of 2 processors activated (12400.80 BogoMIPS) [ 0.140624] devtmpfs: initialized [ 0.140624] x86/mm: Memory block size: 128MB [ 0.140624] evm: security.selinux [ 0.140624] evm: security.SMACK64 [ 0.140624] evm: security.SMACK64EXEC [ 0.140624] evm: security.SMACK64TRANSMUTE [ 0.140624] evm: security.SMACK64MMAP [ 0.140624] evm: security.ima [ 0.140624] evm: security.capability [ 0.140625] PM: Registering ACPI NVS region [mem 0xcffe0000-0xcffe2fff] (12288 bytes) [ 0.140625] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.140625] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.140625] pinctrl core: initialized pinctrl subsystem [ 0.140625] RTC time: 3:31:37, date: 11/03/17 [ 0.140625] NET: Registered protocol family 16 [ 0.140625] cpuidle: using governor ladder [ 0.140625] cpuidle: using governor menu [ 0.140625] PCCT header not found. [ 0.140625] node 0 link 0: io port [d000, ffff] [ 0.140625] TOM: 00000000d0000000 aka 3328M [ 0.140625] node 0 link 0: mmio [a0000, bffff] [ 0.140625] node 0 link 0: mmio [d0000000, dfffffff] [ 0.140625] node 0 link 0: mmio [f0000000, fe02ffff] [ 0.140625] node 0 link 0: mmio [e0000000, e02fffff] [ 0.140625] TOM2: 0000000130000000 aka 4864M [ 0.140625] bus: [bus 00-02] on node 0 link 0 [ 0.140625] bus: 00 [io 0x0000-0xffff] [ 0.140625] bus: 00 [mem 0x000a0000-0x000bffff] [ 0.140625] bus: 00 [mem 0xd0000000-0xefffffff] [ 0.140625] bus: 00 [mem 0xf0000000-0xffffffff] [ 0.140625] bus: 00 [mem 0x130000000-0xfcffffffff] [ 0.140625] ACPI: bus type PCI registered [ 0.140625] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.140625] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.140625] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.140625] PCI: Using configuration type 1 for base access [ 0.140625] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.140625] mtrr: probably your BIOS does not setup all CPUs. [ 0.140625] mtrr: corrected configuration. [ 0.141314] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.144081] ACPI: Added _OSI(Module Device) [ 0.144082] ACPI: Added _OSI(Processor Device) [ 0.144083] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.144084] ACPI: Added _OSI(Processor Aggregator Device) [ 0.144277] ACPI: Executed 1 blocks of module-level executable AML code [ 0.147856] ACPI: Interpreter enabled [ 0.147879] ACPI: (supports S0 S1 S4 S5) [ 0.147880] ACPI: Using IOAPIC for interrupt routing [ 0.147949] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.148156] ACPI: Enabled 6 GPEs in block 00 to 1F [ 0.153261] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.153267] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.153271] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.153482] PCI host bridge to bus 0000:00 [ 0.153484] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.153486] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.153487] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.153488] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window] [ 0.153490] pci_bus 0000:00: root bus resource [mem 0xcfff0000-0xffffffff window] [ 0.153491] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.153500] pci 0000:00:00.0: [1002:5957] type 00 class 0x060000 [ 0.153513] pci 0000:00:00.0: [Firmware Bug]: reg 0x1c: invalid BAR (can't size) [ 0.153606] pci 0000:00:02.0: [1002:5978] type 01 class 0x060400 [ 0.153647] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.153745] pci 0000:00:12.0: [1002:4380] type 00 class 0x01018f [ 0.153766] pci 0000:00:12.0: reg 0x10: [io 0xff00-0xff07] [ 0.153776] pci 0000:00:12.0: reg 0x14: [io 0xfe00-0xfe03] [ 0.153785] pci 0000:00:12.0: reg 0x18: [io 0xfd00-0xfd07] [ 0.153795] pci 0000:00:12.0: reg 0x1c: [io 0xfc00-0xfc03] [ 0.153805] pci 0000:00:12.0: reg 0x20: [io 0xfb00-0xfb0f] [ 0.153815] pci 0000:00:12.0: reg 0x24: [mem 0xfe02f000-0xfe02f3ff] [ 0.153838] pci 0000:00:12.0: set SATA to AHCI mode [ 0.153927] pci 0000:00:13.0: [1002:4387] type 00 class 0x0c0310 [ 0.153946] pci 0000:00:13.0: reg 0x10: [mem 0xfe02e000-0xfe02efff] [ 0.154076] pci 0000:00:13.1: [1002:4388] type 00 class 0x0c0310 [ 0.154095] pci 0000:00:13.1: reg 0x10: [mem 0xfe02d000-0xfe02dfff] [ 0.154226] pci 0000:00:13.2: [1002:4389] type 00 class 0x0c0310 [ 0.154245] pci 0000:00:13.2: reg 0x10: [mem 0xfe02c000-0xfe02cfff] [ 0.154375] pci 0000:00:13.3: [1002:438a] type 00 class 0x0c0310 [ 0.154394] pci 0000:00:13.3: reg 0x10: [mem 0xfe02b000-0xfe02bfff] [ 0.154522] pci 0000:00:13.4: [1002:438b] type 00 class 0x0c0310 [ 0.154540] pci 0000:00:13.4: reg 0x10: [mem 0xfe02a000-0xfe02afff] [ 0.154675] pci 0000:00:13.5: [1002:4386] type 00 class 0x0c0320 [ 0.154698] pci 0000:00:13.5: reg 0x10: [mem 0xfe029000-0xfe0290ff] [ 0.154781] pci 0000:00:13.5: supports D1 D2 [ 0.154782] pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot [ 0.154862] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 [ 0.154888] pci 0000:00:14.0: reg 0x10: [io 0x0b00-0x0b0f] [ 0.155029] pci 0000:00:14.1: [1002:438c] type 00 class 0x01018a [ 0.155047] pci 0000:00:14.1: reg 0x10: [io 0x0000-0x0007] [ 0.155057] pci 0000:00:14.1: reg 0x14: [io 0x0000-0x0003] [ 0.155067] pci 0000:00:14.1: reg 0x18: [io 0x0000-0x0007] [ 0.155076] pci 0000:00:14.1: reg 0x1c: [io 0x0000-0x0003] [ 0.155085] pci 0000:00:14.1: reg 0x20: [io 0xf900-0xf90f] [ 0.155106] pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 0.155107] pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 0.155108] pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 0.155109] pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 0.155184] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 [ 0.155210] pci 0000:00:14.2: reg 0x10: [mem 0xfe024000-0xfe027fff 64bit] [ 0.155280] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.155352] pci 0000:00:14.3: [1002:438d] type 00 class 0x060100 [ 0.155491] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 [ 0.155607] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000 [ 0.155671] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000 [ 0.155735] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000 [ 0.155798] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000 [ 0.155907] pci 0000:01:00.0: [10de:0622] type 00 class 0x030000 [ 0.155925] pci 0000:01:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff] [ 0.155935] pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.155945] pci 0000:01:00.0: reg 0x1c: [mem 0xf8000000-0xf9ffffff 64bit] [ 0.155952] pci 0000:01:00.0: reg 0x24: [io 0xef00-0xef7f] [ 0.155959] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref] [ 0.168014] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.168018] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] [ 0.168020] pci 0000:00:02.0: bridge window [mem 0xf8000000-0xfbffffff] [ 0.168023] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.168073] pci 0000:02:07.0: [10ec:8139] type 00 class 0x020000 [ 0.168099] pci 0000:02:07.0: reg 0x10: [io 0xde00-0xdeff] [ 0.168111] pci 0000:02:07.0: reg 0x14: [mem 0xfdfff000-0xfdfff0ff] [ 0.168166] pci 0000:02:07.0: reg 0x30: [mem 0x00000000-0x0001ffff pref] [ 0.168204] pci 0000:02:07.0: supports D1 D2 [ 0.168205] pci 0000:02:07.0: PME# supported from D1 D2 D3hot [ 0.168279] pci 0000:00:14.4: PCI bridge to [bus 02] (subtractive decode) [ 0.168283] pci 0000:00:14.4: bridge window [io 0xd000-0xdfff] [ 0.168286] pci 0000:00:14.4: bridge window [mem 0xfdf00000-0xfdffffff] [ 0.168290] pci 0000:00:14.4: bridge window [mem 0xfde00000-0xfdefffff pref] [ 0.168292] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.168294] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.168295] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.168296] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode) [ 0.168298] pci 0000:00:14.4: bridge window [mem 0xcfff0000-0xffffffff window] (subtractive decode) [ 0.168448] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.168497] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.168543] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.168590] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.168636] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.168682] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.168728] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.168774] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.172009] SCSI subsystem initialized [ 0.172047] libata version 3.00 loaded. [ 0.172047] pci 0000:01:00.0: vgaarb: setting as boot VGA device [ 0.172047] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.172047] pci 0000:01:00.0: vgaarb: bridge control possible [ 0.172047] vgaarb: loaded [ 0.172047] ACPI: bus type USB registered [ 0.172057] usbcore: registered new interface driver usbfs [ 0.172065] usbcore: registered new interface driver hub [ 0.172080] usbcore: registered new device driver usb [ 0.172120] EDAC MC: Ver: 3.0.0 [ 0.172129] PCI: Using ACPI for IRQ routing [ 0.179601] PCI: pci_cache_line_size set to 64 bytes [ 0.179654] e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff] [ 0.179656] e820: reserve RAM buffer [mem 0xcffe0000-0xcfffffff] [ 0.179758] NetLabel: Initializing [ 0.179759] NetLabel: domain hash size = 128 [ 0.179759] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.179775] NetLabel: unlabeled traffic allowed by default [ 0.180067] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.180072] hpet0: 4 comparators, 32-bit 14.318180 MHz counter [ 0.185046] clocksource: Switched to clocksource hpet [ 0.199716] VFS: Disk quotas dquot_6.6.0 [ 0.199743] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.199876] AppArmor: AppArmor Filesystem Enabled [ 0.199933] pnp: PnP ACPI init [ 0.200163] pnp 00:00: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0007ffff pref] [ 0.200167] pnp 00:00: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:02:07.0 BAR 6 [mem 0x00000000-0x0001ffff pref] [ 0.200201] system 00:00: [io 0x4100-0x411f] has been reserved [ 0.200203] system 00:00: [io 0x0228-0x022f] has been reserved [ 0.200205] system 00:00: [io 0x040b] has been reserved [ 0.200206] system 00:00: [io 0x04d6] has been reserved [ 0.200207] system 00:00: [io 0x0c00-0x0c01] has been reserved [ 0.200209] system 00:00: [io 0x0c14] has been reserved [ 0.200210] system 00:00: [io 0x0c50-0x0c52] has been reserved [ 0.200212] system 00:00: [io 0x0c6c-0x0c6d] has been reserved [ 0.200213] system 00:00: [io 0x0c6f] has been reserved [ 0.200215] system 00:00: [io 0x0cd0-0x0cd1] has been reserved [ 0.200216] system 00:00: [io 0x0cd2-0x0cd3] has been reserved [ 0.200218] system 00:00: [io 0x0cd4-0x0cdf] has been reserved [ 0.200219] system 00:00: [io 0x4000-0x40fe] has been reserved [ 0.200221] system 00:00: [io 0x4210-0x4217] has been reserved [ 0.200222] system 00:00: [io 0x0b10-0x0b1f] has been reserved [ 0.200225] system 00:00: [mem 0xfee00400-0xfee00fff window] has been reserved [ 0.200229] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.200382] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.200461] system 00:02: [io 0x04d0-0x04d1] has been reserved [ 0.200463] system 00:02: [io 0x0220-0x0225] has been reserved [ 0.200465] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.200601] pnp 00:03: [dma 2] [ 0.200630] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.200838] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.201050] pnp 00:05: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.201166] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 0.201250] system 00:07: [mem 0x000f0000-0x000fffff] could not be reserved [ 0.201251] system 00:07: [mem 0x00000000-0x001fffff] could not be reserved [ 0.201253] system 00:07: [mem 0xfed00000-0xfed000ff] has been reserved [ 0.201255] system 00:07: [mem 0xcffe0000-0xcfffffff] could not be reserved [ 0.201256] system 00:07: [mem 0xffff0000-0xffffffff] has been reserved [ 0.201258] system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.201260] system 00:07: [mem 0x00100000-0xcffdffff] could not be reserved [ 0.201261] system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.201263] system 00:07: [mem 0xfee00000-0xfee00fff] could not be reserved [ 0.201265] system 00:07: [mem 0xfff80000-0xfffeffff] has been reserved [ 0.201267] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.201274] pnp: PnP ACPI: found 8 devices [ 0.208633] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.208661] pci 0000:01:00.0: BAR 6: assigned [mem 0xfb000000-0xfb07ffff pref] [ 0.208663] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.208665] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] [ 0.208668] pci 0000:00:02.0: bridge window [mem 0xf8000000-0xfbffffff] [ 0.208670] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.208674] pci 0000:02:07.0: BAR 6: assigned [mem 0xfde00000-0xfde1ffff pref] [ 0.208676] pci 0000:00:14.4: PCI bridge to [bus 02] [ 0.208678] pci 0000:00:14.4: bridge window [io 0xd000-0xdfff] [ 0.208683] pci 0000:00:14.4: bridge window [mem 0xfdf00000-0xfdffffff] [ 0.208686] pci 0000:00:14.4: bridge window [mem 0xfde00000-0xfdefffff pref] [ 0.208694] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.208695] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.208696] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.208698] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window] [ 0.208699] pci_bus 0000:00: resource 8 [mem 0xcfff0000-0xffffffff window] [ 0.208700] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.208702] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfbffffff] [ 0.208703] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.208704] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] [ 0.208706] pci_bus 0000:02: resource 1 [mem 0xfdf00000-0xfdffffff] [ 0.208707] pci_bus 0000:02: resource 2 [mem 0xfde00000-0xfdefffff pref] [ 0.208708] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7 window] [ 0.208709] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff window] [ 0.208711] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.208712] pci_bus 0000:02: resource 7 [mem 0x000c0000-0x000dffff window] [ 0.208713] pci_bus 0000:02: resource 8 [mem 0xcfff0000-0xffffffff window] [ 0.208810] NET: Registered protocol family 2 [ 0.208996] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.209133] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.209343] TCP: Hash tables configured (established 32768 bind 32768) [ 0.209435] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.209469] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.209554] NET: Registered protocol family 1 [ 0.668554] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.668560] PCI: CLS 32 bytes, default 64 [ 0.668620] Unpacking initramfs... [ 1.415718] Freeing initrd memory: 48680K [ 1.415996] PCI-DMA: Disabling AGP. [ 1.416088] PCI-DMA: aperture base @ bc000000 size 65536 KB [ 1.416088] PCI-DMA: using GART IOMMU. [ 1.416091] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 1.418870] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2cb013a1ce6, max_idle_ns: 440795215318 ns [ 1.418931] Scanning for low memory corruption every 60 seconds [ 1.419268] audit: initializing netlink subsys (disabled) [ 1.419342] audit: type=2000 audit(1509679897.419:1): state=initialized audit_enabled=0 res=1 [ 1.419624] Initialise system trusted keyrings [ 1.419633] Key type blacklist registered [ 1.419675] workingset: timestamp_bits=36 max_order=20 bucket_order=0 [ 1.421341] zbud: loaded [ 1.421821] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.422054] fuse init (API version 7.26) [ 1.424471] Key type asymmetric registered [ 1.424472] Asymmetric key parser 'x509' registered [ 1.424521] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 1.424573] io scheduler noop registered [ 1.424574] io scheduler deadline registered [ 1.424609] io scheduler cfq registered (default) [ 1.425050] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.425064] ACPI: Power Button [PWRB] [ 1.425109] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.425146] ACPI: Power Button [PWRF] [ 1.425208] ACPI: ACPI: processor limited to max C-state 1 [ 1.425496] ACPI: Invalid passive threshold [ 1.425605] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 1.425682] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.425683] ACPI: Thermal Zone [THRM] (40 C) [ 1.425708] GHES: HEST is not enabled! [ 1.425821] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.446414] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.448322] Linux agpgart interface v0.103 [ 1.450047] loop: module loaded [ 1.450311] libphy: Fixed MDIO Bus: probed [ 1.450311] tun: Universal TUN/TAP device driver, 1.6 [ 1.450357] PPP generic driver version 2.4.2 [ 1.450408] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.450412] ehci-pci: EHCI PCI platform driver [ 1.450605] ehci-pci 0000:00:13.5: EHCI Host Controller [ 1.450614] ehci-pci 0000:00:13.5: new USB bus registered, assigned bus number 1 [ 1.450618] ehci-pci 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround [ 1.450631] ehci-pci 0000:00:13.5: debug port 1 [ 1.450691] ehci-pci 0000:00:13.5: irq 19, io mem 0xfe029000 [ 1.464210] ehci-pci 0000:00:13.5: USB 2.0 started, EHCI 1.00 [ 1.464277] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.464279] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.464280] usb usb1: Product: EHCI Host Controller [ 1.464281] usb usb1: Manufacturer: Linux 4.13.0-16-generic ehci_hcd [ 1.464283] usb usb1: SerialNumber: 0000:00:13.5 [ 1.464446] hub 1-0:1.0: USB hub found [ 1.464453] hub 1-0:1.0: 10 ports detected [ 1.464721] ehci-platform: EHCI generic platform driver [ 1.464733] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.464736] ohci-pci: OHCI PCI platform driver [ 1.464921] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 1.464928] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 2 [ 1.464971] ohci-pci 0000:00:13.0: irq 16, io mem 0xfe02e000 [ 1.528255] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.528257] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.528259] usb usb2: Product: OHCI PCI host controller [ 1.528260] usb usb2: Manufacturer: Linux 4.13.0-16-generic ohci_hcd [ 1.528261] usb usb2: SerialNumber: 0000:00:13.0 [ 1.528414] hub 2-0:1.0: USB hub found [ 1.528423] hub 2-0:1.0: 2 ports detected [ 1.528708] ohci-pci 0000:00:13.1: OHCI PCI host controller [ 1.528714] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 3 [ 1.528761] ohci-pci 0000:00:13.1: irq 17, io mem 0xfe02d000 [ 1.592251] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.592254] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.592255] usb usb3: Product: OHCI PCI host controller [ 1.592256] usb usb3: Manufacturer: Linux 4.13.0-16-generic ohci_hcd [ 1.592257] usb usb3: SerialNumber: 0000:00:13.1 [ 1.592405] hub 3-0:1.0: USB hub found [ 1.592416] hub 3-0:1.0: 2 ports detected [ 1.592697] ohci-pci 0000:00:13.2: OHCI PCI host controller [ 1.592705] ohci-pci 0000:00:13.2: new USB bus registered, assigned bus number 4 [ 1.592750] ohci-pci 0000:00:13.2: irq 18, io mem 0xfe02c000 [ 1.656254] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.656257] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.656258] usb usb4: Product: OHCI PCI host controller [ 1.656259] usb usb4: Manufacturer: Linux 4.13.0-16-generic ohci_hcd [ 1.656261] usb usb4: SerialNumber: 0000:00:13.2 [ 1.656406] hub 4-0:1.0: USB hub found [ 1.656416] hub 4-0:1.0: 2 ports detected [ 1.656674] ohci-pci 0000:00:13.3: OHCI PCI host controller [ 1.656681] ohci-pci 0000:00:13.3: new USB bus registered, assigned bus number 5 [ 1.656710] ohci-pci 0000:00:13.3: irq 17, io mem 0xfe02b000 [ 1.720253] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.720256] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.720257] usb usb5: Product: OHCI PCI host controller [ 1.720258] usb usb5: Manufacturer: Linux 4.13.0-16-generic ohci_hcd [ 1.720260] usb usb5: SerialNumber: 0000:00:13.3 [ 1.720406] hub 5-0:1.0: USB hub found [ 1.720415] hub 5-0:1.0: 2 ports detected [ 1.720680] ohci-pci 0000:00:13.4: OHCI PCI host controller [ 1.720687] ohci-pci 0000:00:13.4: new USB bus registered, assigned bus number 6 [ 1.720716] ohci-pci 0000:00:13.4: irq 18, io mem 0xfe02a000 [ 1.784251] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.784253] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.784254] usb usb6: Product: OHCI PCI host controller [ 1.784256] usb usb6: Manufacturer: Linux 4.13.0-16-generic ohci_hcd [ 1.784257] usb usb6: SerialNumber: 0000:00:13.4 [ 1.784413] hub 6-0:1.0: USB hub found [ 1.784422] hub 6-0:1.0: 2 ports detected [ 1.784542] ohci-platform: OHCI generic platform driver [ 1.784550] uhci_hcd: USB Universal Host Controller Interface driver [ 1.784610] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 1.784611] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 1.784776] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.784896] mousedev: PS/2 mouse device common for all mice [ 1.785051] rtc_cmos 00:01: RTC can wake from S4 [ 1.785186] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 1.785229] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs [ 1.785236] i2c /dev entries driver [ 1.785306] device-mapper: uevent: version 1.0.3 [ 1.785393] device-mapper: ioctl: 4.36.0-ioctl (2017-06-09) initialised: dm-devel@redhat.com [ 1.785427] ledtrig-cpu: registered to indicate activity on CPUs [ 1.785870] NET: Registered protocol family 10 [ 1.790857] Segment Routing with IPv6 [ 1.790883] NET: Registered protocol family 17 [ 1.790893] Key type dns_resolver registered [ 1.791129] RAS: Correctable Errors collector initialized. [ 1.791144] microcode: AMD CPU family 0xf not supported [ 1.791313] registered taskstats version 1 [ 1.791324] Loading compiled-in X.509 certificates [ 1.794693] Loaded X.509 cert 'Build time autogenerated kernel key: 04409fd30ffab3ce9d2178c508b3c866d61d9a62' [ 1.794715] zswap: loaded using pool lzo/zbud [ 1.797132] Key type big_key registered [ 1.797135] Key type trusted registered [ 1.799355] Key type encrypted registered [ 1.799357] AppArmor: AppArmor sha1 policy hashing enabled [ 1.799360] ima: No TPM chip found, activating TPM-bypass! (rc=-19) [ 1.799382] evm: HMAC attrs: 0x1 [ 1.799614] Magic number: 9:49:512 [ 1.799617] hash matches /build/linux-XO_uEE/linux-4.13.0/drivers/base/power/main.c:884 [ 1.799750] rtc_cmos 00:01: setting system clock to 2017-11-03 03:31:39 UTC (1509679899) [ 1.799961] powernow_k8: fid 0x17 (3100 MHz), vid 0x6 [ 1.799962] powernow_k8: fid 0x16 (3000 MHz), vid 0x7 [ 1.799963] powernow_k8: fid 0x14 (2800 MHz), vid 0x9 [ 1.799963] powernow_k8: fid 0x12 (2600 MHz), vid 0xb [ 1.799964] powernow_k8: fid 0x10 (2400 MHz), vid 0xd [ 1.799965] powernow_k8: fid 0xe (2200 MHz), vid 0xf [ 1.799965] powernow_k8: fid 0xc (2000 MHz), vid 0x11 [ 1.799966] powernow_k8: fid 0xa (1800 MHz), vid 0x11 [ 1.799966] powernow_k8: fid 0x2 (1000 MHz), vid 0x12 [ 1.799994] powernow_k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ (2 cpu cores) (version 2.20.00) [ 1.799997] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.799998] EDD information not available. [ 1.800046] PM: Hibernation image not present or could not be loaded. [ 1.803658] Freeing unused kernel memory: 2324K [ 1.803660] Write protecting the kernel read-only data: 14336k [ 1.804309] Freeing unused kernel memory: 948K [ 1.804611] Freeing unused kernel memory: 104K [ 1.807078] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.809469] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 1.924045] FDC 0 is a post-1991 82077 [ 1.949778] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 1.949785] 8139cp 0000:02:07.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too [ 1.952424] 8139too: 8139too Fast Ethernet driver 0.9.28 [ 1.962604] 8139too 0000:02:07.0 eth0: RealTek RTL8139 at 0x000000000001de00, 00:a1:b0:11:78:79, IRQ 23 [ 1.962809] scsi host0: pata_atiixp [ 1.967170] scsi host1: pata_atiixp [ 1.967245] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf900 irq 14 [ 1.967246] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf908 irq 15 [ 1.968936] ahci 0000:00:12.0: version 3.0 [ 1.969121] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit [ 1.969215] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 1.969217] ahci 0000:00:12.0: flags: ncq sntf ilck led clo pmp pio ccc [ 1.972108] scsi host2: ahci [ 1.977547] scsi host3: ahci [ 1.981148] 8139too 0000:02:07.0 enp2s7: renamed from eth0 [ 1.990160] scsi host4: ahci [ 1.990303] scsi host5: ahci [ 1.990357] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22 [ 1.990359] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22 [ 1.990361] ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22 [ 1.990364] ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22 [ 2.108204] usb 2-1: new full-speed USB device number 2 using ohci-pci [ 2.127191] ata1.00: ATAPI: HL-DT-STDVD-RAM GH22NP20, 1.00, max UDMA/66 [ 2.132107] ata1.00: configured for UDMA/66 [ 2.134316] scsi 0:0:0:0: CD-ROM HL-DT-ST DVD-RAM GH22NP20 1.00 PQ: 0 ANSI: 5 [ 2.146455] sr 0:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.146458] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.146616] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 2.146675] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 2.295191] usb 2-1: New USB device found, idVendor=09da, idProduct=9090 [ 2.295194] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.295195] usb 2-1: Product: USB Device [ 2.295196] usb 2-1: Manufacturer: A4TECH [ 2.302103] hidraw: raw HID events driver (C) Jiri Kosina [ 2.312206] ata6: SATA link down (SStatus 0 SControl 300) [ 2.312251] ata5: SATA link down (SStatus 0 SControl 300) [ 2.312541] usbcore: registered new interface driver usbhid [ 2.312542] usbhid: USB HID core driver [ 2.315246] input: A4TECH USB Device as /devices/pci0000:00/0000:00:13.0/usb2/2-1/2-1:1.0/0003:09DA:9090.0001/input/input3 [ 2.372395] hid-generic 0003:09DA:9090.0001: input,hiddev0,hidraw0: USB HID v1.11 Keyboard [A4TECH USB Device] on usb-0000:00:13.0-1/input0 [ 2.372666] input: A4TECH USB Device as /devices/pci0000:00/0000:00:13.0/usb2/2-1/2-1:1.1/0003:09DA:9090.0002/input/input4 [ 2.372783] hid-generic 0003:09DA:9090.0002: input,hidraw1: USB HID v1.11 Mouse [A4TECH USB Device] on usb-0000:00:13.0-1/input1 [ 2.460181] ata3: softreset failed (device not ready) [ 2.460232] ata3: applying PMP SRST workaround and retrying [ 2.464204] ata4: softreset failed (device not ready) [ 2.464256] ata4: applying PMP SRST workaround and retrying [ 2.620188] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.620856] ata3.00: ATA-11: KINGSTON SUV400S37240G, 0C3FD6SD, max UDMA/133 [ 2.620858] ata3.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.621151] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd [ 2.622099] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd [ 2.622101] ata3.00: configured for UDMA/133 [ 2.622334] scsi 2:0:0:0: Direct-Access ATA KINGSTON SUV400S D6SD PQ: 0 ANSI: 5 [ 2.624219] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.626804] ata4.00: ATA-8: SAMSUNG HD321KJ, CP100-12, max UDMA7 [ 2.626805] ata4.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.626807] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd [ 2.629650] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd [ 2.629651] ata4.00: configured for UDMA/133 [ 2.652383] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 2.652577] scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD321KJ 0-12 PQ: 0 ANSI: 5 [ 2.652584] sd 2:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB) [ 2.652587] sd 2:0:0:0: [sda] 4096-byte physical blocks [ 2.652601] sd 2:0:0:0: [sda] Write Protect is off [ 2.652603] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.652640] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.653157] sda: sda1 [ 2.653559] sd 2:0:0:0: [sda] Attached SCSI disk [ 2.680538] sd 3:0:0:0: Attached scsi generic sg2 type 0 [ 2.680556] sd 3:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 2.680571] sd 3:0:0:0: [sdb] Write Protect is off [ 2.680573] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.680602] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.684077] sdb: sdb1 [ 2.684146] usb 1-3: new high-speed USB device number 3 using ehci-pci [ 2.684514] sd 3:0:0:0: [sdb] Attached SCSI disk [ 2.950944] usb 1-3: New USB device found, idVendor=046d, idProduct=0817 [ 2.950947] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=2 [ 2.950948] usb 1-3: SerialNumber: D12615A0 [ 3.068203] usb 1-5: new high-speed USB device number 4 using ehci-pci [ 3.217867] usb 1-5: New USB device found, idVendor=1a40, idProduct=0101 [ 3.217869] usb 1-5: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 3.217870] usb 1-5: Product: USB 2.0 Hub [ 3.218434] hub 1-5:1.0: USB hub found [ 3.218799] hub 1-5:1.0: 4 ports detected [ 3.340196] usb 1-6: new high-speed USB device number 5 using ehci-pci [ 3.489863] usb 1-6: New USB device found, idVendor=1a40, idProduct=0101 [ 3.489865] usb 1-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 3.489867] usb 1-6: Product: USB 2.0 Hub [ 3.490434] hub 1-6:1.0: USB hub found [ 3.490795] hub 1-6:1.0: 4 ports detected [ 3.698504] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 3.890652] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.899780] systemd[1]: systemd 234 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid) [ 3.899926] systemd[1]: Detected architecture x86-64. [ 3.900434] systemd[1]: Set hostname to . [ 4.049469] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 4.049768] systemd[1]: Created slice System Slice. [ 4.049836] systemd[1]: Listening on fsck to fsckd communication Socket. [ 4.049872] systemd[1]: Reached target User and Group Name Lookups. [ 4.049939] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 4.050817] systemd[1]: Mounting Kernel Debug File System... [ 4.050977] systemd[1]: Listening on Syslog Socket. [ 4.097378] lp: driver loaded but no devices found [ 4.106405] ppdev: user-space parallel port driver [ 4.108936] parport_pc 00:05: reported by Plug and Play ACPI [ 4.109025] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 4.196122] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 4.204746] lp0: using parport0 (interrupt-driven). [ 4.249828] systemd-journald[225]: Received request to flush runtime journal from PID 1 [ 4.324523] Adding 2097148k swap on /swapfile. Priority:-1 extents:6 across:2260988k SSFS [ 4.632377] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 4.641480] audit: type=1400 audit(1509679902.341:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/3247/usr/lib/snapd/snap-confine" pid=352 comm="apparmor_parser" [ 4.641485] audit: type=1400 audit(1509679902.341:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/3247/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=352 comm="apparmor_parser" [ 4.647767] audit: type=1400 audit(1509679902.347:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=351 comm="apparmor_parser" [ 4.647773] audit: type=1400 audit(1509679902.348:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=351 comm="apparmor_parser" [ 4.647775] audit: type=1400 audit(1509679902.348:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=351 comm="apparmor_parser" [ 4.647777] audit: type=1400 audit(1509679902.348:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=351 comm="apparmor_parser" [ 4.657548] audit: type=1400 audit(1509679902.357:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=355 comm="apparmor_parser" [ 4.665001] audit: type=1400 audit(1509679902.365:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=356 comm="apparmor_parser" [ 4.691684] audit: type=1400 audit(1509679902.391:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-soffice" pid=357 comm="apparmor_parser" [ 4.912172] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 4.912288] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb10 [ 5.001069] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 [ 5.001229] k8temp 0000:00:18.3: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 5.073973] media: Linux media interface: v0.10 [ 5.245343] Linux video capture interface: v2.00 [ 5.355655] snd_hda_codec_realtek hdaudioC0D3: autoconfig for ALC662 rev1: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line [ 5.355659] snd_hda_codec_realtek hdaudioC0D3: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 5.355660] snd_hda_codec_realtek hdaudioC0D3: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 5.355661] snd_hda_codec_realtek hdaudioC0D3: mono: mono_out=0x0 [ 5.355662] snd_hda_codec_realtek hdaudioC0D3: dig-out=0x1e/0x0 [ 5.355663] snd_hda_codec_realtek hdaudioC0D3: inputs: [ 5.355665] snd_hda_codec_realtek hdaudioC0D3: Front Mic=0x19 [ 5.355667] snd_hda_codec_realtek hdaudioC0D3: Rear Mic=0x18 [ 5.355668] snd_hda_codec_realtek hdaudioC0D3: Line=0x1a [ 5.388137] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input5 [ 5.388252] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input6 [ 5.388324] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input7 [ 5.388392] input: HDA ATI SB Line Out as /devices/pci0000:00/0000:00:14.2/sound/card0/input8 [ 5.388460] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input9 [ 5.432975] nvidia: loading out-of-tree module taints kernel. [ 5.432983] nvidia: module license 'NVIDIA' taints kernel. [ 5.432984] Disabling lock debugging due to kernel taint [ 5.451295] nvidia: module verification failed: signature and/or required key missing - tainting kernel [ 5.776362] uvcvideo: Found UVC 1.00 device (046d:0817) [ 5.820785] random: crng init done [ 5.918356] uvcvideo 1-3:1.0: Entity type for entity Extension 4 was not initialized! [ 5.918360] uvcvideo 1-3:1.0: Entity type for entity Extension 8 was not initialized! [ 5.918362] uvcvideo 1-3:1.0: Entity type for entity Extension 10 was not initialized! [ 5.918363] uvcvideo 1-3:1.0: Entity type for entity Extension 12 was not initialized! [ 5.918364] uvcvideo 1-3:1.0: Entity type for entity Extension 11 was not initialized! [ 5.918366] uvcvideo 1-3:1.0: Entity type for entity Processing 2 was not initialized! [ 5.918367] uvcvideo 1-3:1.0: Entity type for entity Extension 13 was not initialized! [ 5.918368] uvcvideo 1-3:1.0: Entity type for entity Camera 1 was not initialized! [ 5.918370] uvcvideo 1-3:1.0: Entity type for entity Extension 14 was not initialized! [ 5.923557] input: UVC Camera (046d:0817) as /devices/pci0000:00/0000:00:13.5/usb1/1-3/1-3:1.0/input/input10 [ 5.923604] kvm: Nested Virtualization enabled [ 5.932400] IPv6: ADDRCONF(NETDEV_UP): enp2s7: link is not ready [ 5.932537] 8139too 0000:02:07.0 enp2s7: link up, 100Mbps, full-duplex, lpa 0xD1E1 [ 5.934338] usbcore: registered new interface driver uvcvideo [ 5.934341] USB Video Class driver (1.1.1) [ 6.057281] nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem [ 6.059446] MCE: In-kernel MCE decoding enabled. [ 6.063570] [drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:01:00.0 on minor 0 [ 6.063580] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 340.104 Thu Sep 14 17:13:13 PDT 2017 [ 6.095080] EDAC amd64: Node 0: DRAM ECC disabled. [ 6.095083] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 6.812485] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) [ 6.848475] nvidia_uvm: Loaded the UVM driver, major device number 244 [ 33.787469] rfkill: input handler disabled [ 36.836062] usb 1-3: reset high-speed USB device number 3 using ehci-pci [ 8622.958498] perf: interrupt took too long (2523 > 2500), lowering kernel.perf_event_max_sample_rate to 79250