[ 0.000000] microcode: microcode updated early to revision 0x2f, date = 2019-02-17 [ 0.000000] Linux version 5.3.0-40-generic (buildd@lcy01-amd64-026) (gcc version 9.2.1 20191008 (Ubuntu 9.2.1-9ubuntu2)) #32-Ubuntu SMP Fri Jan 31 20:24:34 UTC 2020 (Ubuntu 5.3.0-40.32-generic 5.3.18) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.3.0-40-generic root=UUID=39061fda-9307-47bd-b16c-043cf73dd271 ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Hygon HygonGenuine [ 0.000000] Centaur CentaurHauls [ 0.000000] zhaoxin Shanghai [ 0.000000] Disabled fast string operations [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009ffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000d66aefff] usable [ 0.000000] BIOS-e820: [mem 0x00000000d66af000-0x00000000d680efff] type 20 [ 0.000000] BIOS-e820: [mem 0x00000000d680f000-0x00000000d6e9efff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000d6e9f000-0x00000000d6f8efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000d6f8f000-0x00000000d6ffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000d6fff000-0x00000000d6ffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000f80f8000-0x00000000f80f8fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011fdfffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.00 by Phoenix Technologies Ltd. [ 0.000000] efi: ACPI=0xd6ffe000 ACPI 2.0=0xd6ffe014 SMBIOS=0xd6e27000 [ 0.000000] secureboot: Secure boot could not be determined (mode 0) [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Gateway NV47H/NV47H, BIOS V2.09 08/11/2011 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2394.667 MHz processor [ 0.002291] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.002293] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.002299] last_pfn = 0x11fe00 max_arch_pfn = 0x400000000 [ 0.002303] MTRR default type: uncachable [ 0.002304] MTRR fixed ranges enabled: [ 0.002305] 00000-9FFFF write-back [ 0.002306] A0000-BFFFF uncachable [ 0.002307] C0000-FFFFF write-protect [ 0.002308] MTRR variable ranges enabled: [ 0.002309] 0 base 000000000 mask F80000000 write-back [ 0.002311] 1 base 080000000 mask FC0000000 write-back [ 0.002311] 2 base 0C0000000 mask FE0000000 write-back [ 0.002312] 3 base 0D8000000 mask FF8000000 uncachable [ 0.002313] 4 base 0D7000000 mask FFF000000 uncachable [ 0.002314] 5 base 100000000 mask FE0000000 write-back [ 0.002315] 6 base 0FFC00000 mask FFFC00000 write-protect [ 0.002315] 7 disabled [ 0.002316] 8 disabled [ 0.002316] 9 disabled [ 0.003065] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.003197] last_pfn = 0xd7000 max_arch_pfn = 0x400000000 [ 0.014468] check: Scanning 1 areas for low memory corruption [ 0.014471] reserving inaccessible SNB gfx pages [ 0.014477] BRK [0x57201000, 0x57201fff] PGTABLE [ 0.014480] BRK [0x57202000, 0x57202fff] PGTABLE [ 0.014481] BRK [0x57203000, 0x57203fff] PGTABLE [ 0.014539] BRK [0x57204000, 0x57204fff] PGTABLE [ 0.014540] BRK [0x57205000, 0x57205fff] PGTABLE [ 0.014658] BRK [0x57206000, 0x57206fff] PGTABLE [ 0.014722] BRK [0x57207000, 0x57207fff] PGTABLE [ 0.014813] BRK [0x57208000, 0x57208fff] PGTABLE [ 0.015085] RAMDISK: [mem 0x32495000-0x35241fff] [ 0.015093] ACPI: Early table checksum verification disabled [ 0.015098] ACPI: RSDP 0x00000000D6FFE014 000024 (v02 ACRSYS) [ 0.015101] ACPI: XSDT 0x00000000D6FFE120 000084 (v01 ACRSYS ACRPRDCT 00000001 ANNI 00000001) [ 0.015107] ACPI: FACP 0x00000000D6FEB000 0000F4 (v03 ACRSYS ACRPRDCT 00000001 PTL 00000001) [ 0.015113] ACPI: DSDT 0x00000000D6FEE000 00C0C4 (v02 ACRSYS SNB-CPT 00000000 INTL 20061109) [ 0.015117] ACPI: FACS 0x00000000D6F2D000 000040 [ 0.015119] ACPI: FACS 0x00000000D6F2D000 000040 [ 0.015122] ACPI: SLIC 0x00000000D6FFD000 000176 (v01 ACRSYS ACRPRDCT 00000001 ANNI 00000001) [ 0.015125] ACPI: SSDT 0x00000000D6FFB000 001068 (v01 ACRSYS PtidDevc 00001000 INTL 20061109) [ 0.015128] ACPI: ASF! 0x00000000D6FED000 0000A5 (v32 ACRSYS ACRPRDCT 00000001 PTL 00000001) [ 0.015131] ACPI: HPET 0x00000000D6FEA000 000038 (v01 ACRSYS ACRPRDCT 00000001 PTL 00000001) [ 0.015134] ACPI: APIC 0x00000000D6FE9000 000098 (v01 ACRSYS ACRPRDCT 00000001 PTL 00000001) [ 0.015137] ACPI: MCFG 0x00000000D6FE8000 00003C (v01 ACRSYS ACRPRDCT 00000001 PTL 00000001) [ 0.015140] ACPI: SSDT 0x00000000D6FE7000 000804 (v01 PmRef Cpu0Ist 00003000 INTL 20061109) [ 0.015144] ACPI: SSDT 0x00000000D6FE6000 000996 (v01 PmRef CpuPm 00003000 INTL 20061109) [ 0.015147] ACPI: UEFI 0x00000000D6FE5000 00003E (v01 ACRSYS ACRPRDCT 00000001 PTL 00000001) [ 0.015150] ACPI: UEFI 0x00000000D6FE4000 000042 (v01 PTL COMBUF 00000001 PTL 00000001) [ 0.015153] ACPI: UEFI 0x00000000D6FE3000 000256 (v01 ACRSYS ACRPRDCT 00000001 PTL 00000001) [ 0.015162] ACPI: Local APIC address 0xfee00000 [ 0.015261] No NUMA configuration found [ 0.015262] Faking a node at [mem 0x0000000000000000-0x000000011fdfffff] [ 0.015272] NODE_DATA(0) allocated [mem 0x11fdd3000-0x11fdfdfff] [ 0.015545] Zone ranges: [ 0.015546] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.015548] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.015549] Normal [mem 0x0000000100000000-0x000000011fdfffff] [ 0.015549] Device empty [ 0.015550] Movable zone start for each node [ 0.015554] Early memory node ranges [ 0.015555] node 0: [mem 0x0000000000001000-0x0000000000057fff] [ 0.015556] node 0: [mem 0x0000000000059000-0x000000000009ffff] [ 0.015556] node 0: [mem 0x0000000000100000-0x000000001fffffff] [ 0.015557] node 0: [mem 0x0000000020200000-0x000000003fffffff] [ 0.015558] node 0: [mem 0x0000000040200000-0x00000000d66aefff] [ 0.015559] node 0: [mem 0x00000000d6fff000-0x00000000d6ffffff] [ 0.015559] node 0: [mem 0x0000000100000000-0x000000011fdfffff] [ 0.015638] Zeroed struct page in unavailable ranges: 7602 pages [ 0.015639] Initmem setup node 0 [mem 0x0000000000001000-0x000000011fdfffff] [ 0.015641] On node 0 totalpages: 1007694 [ 0.015642] DMA zone: 64 pages used for memmap [ 0.015642] DMA zone: 174 pages reserved [ 0.015643] DMA zone: 3998 pages, LIFO batch:0 [ 0.015704] DMA32 zone: 13643 pages used for memmap [ 0.015705] DMA32 zone: 873136 pages, LIFO batch:63 [ 0.028943] Normal zone: 2040 pages used for memmap [ 0.028945] Normal zone: 130560 pages, LIFO batch:31 [ 0.030779] Reserving Intel graphics memory at [mem 0xd7a00000-0xdf9fffff] [ 0.030936] ACPI: PM-Timer IO Port: 0x408 [ 0.030939] ACPI: Local APIC address 0xfee00000 [ 0.030947] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.030948] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.030958] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.030961] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.030962] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.030964] ACPI: IRQ0 used by override. [ 0.030965] ACPI: IRQ9 used by override. [ 0.030967] Using ACPI (MADT) for SMP configuration information [ 0.030968] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.030974] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.030995] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.030997] PM: Registered nosave memory: [mem 0x00058000-0x00058fff] [ 0.030999] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.031000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff] [ 0.031002] PM: Registered nosave memory: [mem 0x40000000-0x401fffff] [ 0.031004] PM: Registered nosave memory: [mem 0xd66af000-0xd680efff] [ 0.031004] PM: Registered nosave memory: [mem 0xd680f000-0xd6e9efff] [ 0.031005] PM: Registered nosave memory: [mem 0xd6e9f000-0xd6f8efff] [ 0.031006] PM: Registered nosave memory: [mem 0xd6f8f000-0xd6ffefff] [ 0.031007] PM: Registered nosave memory: [mem 0xd7000000-0xd79fffff] [ 0.031008] PM: Registered nosave memory: [mem 0xd7a00000-0xdf9fffff] [ 0.031008] PM: Registered nosave memory: [mem 0xdfa00000-0xf80f7fff] [ 0.031009] PM: Registered nosave memory: [mem 0xf80f8000-0xf80f8fff] [ 0.031010] PM: Registered nosave memory: [mem 0xf80f9000-0xfed1bfff] [ 0.031010] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.031011] PM: Registered nosave memory: [mem 0xfed20000-0xffffffff] [ 0.031013] [mem 0xdfa00000-0xf80f7fff] available for PCI devices [ 0.031014] Booting paravirtualized kernel on bare hardware [ 0.031017] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.031025] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.032792] percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u262144 [ 0.032800] pcpu-alloc: s184320 r8192 d28672 u262144 alloc=1*2097152 [ 0.032801] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.032837] Built 1 zonelists, mobility grouping on. Total pages: 991773 [ 0.032838] Policy zone: Normal [ 0.032840] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.3.0-40-generic root=UUID=39061fda-9307-47bd-b16c-043cf73dd271 ro quiet splash vt.handoff=7 [ 0.034945] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.035933] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.036035] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.067695] Calgary: detecting Calgary via BIOS EBDA area [ 0.067697] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.079190] Memory: 3759276K/4030776K available (14339K kernel code, 2387K rwdata, 4724K rodata, 2668K init, 5056K bss, 271500K reserved, 0K cma-reserved) [ 0.079198] random: get_random_u64 called from kmem_cache_open+0x2d/0x410 with crng_init=0 [ 0.079352] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.079365] Kernel/User page tables isolation: enabled [ 0.079381] ftrace: allocating 43186 entries in 169 pages [ 0.097348] rcu: Hierarchical RCU implementation. [ 0.097350] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. [ 0.097351] Tasks RCU enabled. [ 0.097352] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.097352] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.100862] NR_IRQS: 524544, nr_irqs: 488, preallocated irqs: 16 [ 0.101110] vt handoff: transparent VT on vt#7 [ 0.101118] Console: colour dummy device 80x25 [ 0.101122] printk: console [tty0] enabled [ 0.101139] ACPI: Core revision 20190703 [ 0.101268] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.101282] APIC: Switch to symmetric I/O mode setup [ 0.101351] x2apic: IRQ remapping doesn't support X2APIC mode [ 0.101767] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.121280] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x228489746cb, max_idle_ns: 440795233969 ns [ 0.121284] Calibrating delay loop (skipped), value calculated using timer frequency.. 4789.33 BogoMIPS (lpj=9578668) [ 0.121286] pid_max: default: 32768 minimum: 301 [ 0.123574] LSM: Security Framework initializing [ 0.123586] Yama: becoming mindful. [ 0.123631] AppArmor: AppArmor initialized [ 0.123675] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.123683] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.123857] *** VALIDATE proc *** [ 0.123914] *** VALIDATE cgroup1 *** [ 0.123916] *** VALIDATE cgroup2 *** [ 0.123947] Disabled fast string operations [ 0.123969] mce: CPU0: Thermal monitoring enabled (TM1) [ 0.123979] process: using mwait in idle threads [ 0.123982] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 0.123982] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.123986] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.123987] Spectre V2 : Mitigation: Full generic retpoline [ 0.123988] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.123989] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.123990] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.123991] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl [ 0.123992] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.123995] MDS: Mitigation: Clear CPU buffers [ 0.124132] Freeing SMP alternatives memory: 36K [ 0.126133] TSC deadline timer enabled [ 0.126136] smpboot: CPU0: Intel(R) Core(TM) i5-2430M CPU @ 2.40GHz (family: 0x6, model: 0x2a, stepping: 0x7) [ 0.126258] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.126264] ... version: 3 [ 0.126265] ... bit width: 48 [ 0.126265] ... generic registers: 4 [ 0.126266] ... value mask: 0000ffffffffffff [ 0.126267] ... max period: 00007fffffffffff [ 0.126267] ... fixed-purpose events: 3 [ 0.126268] ... event mask: 000000070000000f [ 0.126319] rcu: Hierarchical SRCU implementation. [ 0.127422] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.127532] smp: Bringing up secondary CPUs ... [ 0.127653] x86: Booting SMP configuration: [ 0.127654] .... node #0, CPUs: #1 [ 0.004230] Disabled fast string operations [ 0.129385] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.129457] #2 [ 0.004230] Disabled fast string operations [ 0.133370] #3 [ 0.004230] Disabled fast string operations [ 0.135679] smp: Brought up 1 node, 4 CPUs [ 0.135679] smpboot: Max logical packages: 2 [ 0.135679] smpboot: Total of 4 processors activated (19157.33 BogoMIPS) [ 0.137467] devtmpfs: initialized [ 0.137467] x86/mm: Memory block size: 128MB [ 0.137764] PM: Registering ACPI NVS region [mem 0x00058000-0x00058fff] (4096 bytes) [ 0.137764] PM: Registering ACPI NVS region [mem 0xd6e9f000-0xd6f8efff] (983040 bytes) [ 0.137764] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.137764] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.137764] pinctrl core: initialized pinctrl subsystem [ 0.137764] PM: RTC time: 23:40:50, date: 2020-03-12 [ 0.137764] NET: Registered protocol family 16 [ 0.137764] audit: initializing netlink subsys (disabled) [ 0.137764] audit: type=2000 audit(1584056450.036:1): state=initialized audit_enabled=0 res=1 [ 0.137764] EISA bus registered [ 0.137764] cpuidle: using governor ladder [ 0.137764] cpuidle: using governor menu [ 0.137764] ACPI: bus type PCI registered [ 0.137764] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.137764] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.137764] PCI: not using MMCONFIG [ 0.137764] PCI: Using configuration type 1 for base access [ 0.137764] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on [ 0.137764] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.138722] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.141410] ACPI: Added _OSI(Module Device) [ 0.141411] ACPI: Added _OSI(Processor Device) [ 0.141412] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.141412] ACPI: Added _OSI(Processor Aggregator Device) [ 0.141414] ACPI: Added _OSI(Linux-Dell-Video) [ 0.141414] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.141415] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.154209] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 0.155575] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.156140] ACPI: Dynamic OEM Table Load: [ 0.156147] ACPI: SSDT 0xFFFF9B941A84F800 000727 (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 0.157207] ACPI: Dynamic OEM Table Load: [ 0.157212] ACPI: SSDT 0xFFFF9B941A882C00 000303 (v01 PmRef ApIst 00003000 INTL 20061109) [ 0.158026] ACPI: Dynamic OEM Table Load: [ 0.158030] ACPI: SSDT 0xFFFF9B941AA1E800 000119 (v01 PmRef ApCst 00003000 INTL 20061109) [ 0.159586] ACPI: EC: EC started [ 0.159587] ACPI: EC: interrupt blocked [ 0.161712] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC [ 0.161714] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.161715] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions [ 0.161716] ACPI: Interpreter enabled [ 0.161745] ACPI: (supports S0 S1 S3 S4 S5) [ 0.161746] ACPI: Using IOAPIC for interrupt routing [ 0.161779] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.162336] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources [ 0.162346] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.162639] ACPI: Enabled 8 GPEs in block 00 to 3F [ 0.170882] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.170888] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.170950] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM [ 0.171563] PCI host bridge to bus 0000:00 [ 0.171566] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.171567] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.171568] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.171569] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff window] [ 0.171570] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window] [ 0.171572] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.171582] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000 [ 0.171689] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000 [ 0.171700] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit] [ 0.171705] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.171709] pci 0000:00:02.0: reg 0x20: [io 0x2000-0x203f] [ 0.171720] pci 0000:00:02.0: BAR 2: assigned to efifb [ 0.171831] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000 [ 0.171856] pci 0000:00:16.0: reg 0x10: [mem 0xf0605000-0xf060500f 64bit] [ 0.171931] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.172027] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 [ 0.172048] pci 0000:00:1a.0: reg 0x10: [mem 0xf060a000-0xf060a3ff] [ 0.172133] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.172229] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300 [ 0.172250] pci 0000:00:1b.0: reg 0x10: [mem 0xf0600000-0xf0603fff 64bit] [ 0.172326] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.172424] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 [ 0.172572] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.172695] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400 [ 0.172840] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.172965] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400 [ 0.173125] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.173246] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 [ 0.173267] pci 0000:00:1d.0: reg 0x10: [mem 0xf0609000-0xf06093ff] [ 0.173353] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.173449] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100 [ 0.173640] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601 [ 0.173657] pci 0000:00:1f.2: reg 0x10: [io 0x2088-0x208f] [ 0.173664] pci 0000:00:1f.2: reg 0x14: [io 0x2094-0x2097] [ 0.173671] pci 0000:00:1f.2: reg 0x18: [io 0x2080-0x2087] [ 0.173677] pci 0000:00:1f.2: reg 0x1c: [io 0x2090-0x2093] [ 0.173684] pci 0000:00:1f.2: reg 0x20: [io 0x2060-0x207f] [ 0.173691] pci 0000:00:1f.2: reg 0x24: [mem 0xf0608000-0xf06087ff] [ 0.173731] pci 0000:00:1f.2: PME# supported from D3hot [ 0.173817] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500 [ 0.173835] pci 0000:00:1f.3: reg 0x10: [mem 0xf0604000-0xf06040ff 64bit] [ 0.173854] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf] [ 0.174018] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.174158] pci 0000:02:00.0: [14e4:4358] type 00 class 0x028000 [ 0.174203] pci 0000:02:00.0: reg 0x10: [mem 0xf0500000-0xf0503fff 64bit] [ 0.174279] pci 0000:02:00.0: enabling Extended Tags [ 0.174385] pci 0000:02:00.0: supports D1 D2 [ 0.174386] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.174527] pci 0000:00:1c.1: PCI bridge to [bus 02] [ 0.174532] pci 0000:00:1c.1: bridge window [mem 0xf0500000-0xf05fffff] [ 0.174648] pci 0000:03:00.0: [14e4:16b5] type 00 class 0x020000 [ 0.174694] pci 0000:03:00.0: reg 0x10: [mem 0xf0400000-0xf040ffff 64bit pref] [ 0.174716] pci 0000:03:00.0: reg 0x18: [mem 0xf0410000-0xf041ffff 64bit pref] [ 0.174758] pci 0000:03:00.0: reg 0x30: [mem 0xfffff800-0xffffffff pref] [ 0.174882] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.175043] pci 0000:03:00.1: [14e4:16bc] type 00 class 0x080501 [ 0.175087] pci 0000:03:00.1: reg 0x10: [mem 0xf0420000-0xf042ffff 64bit pref] [ 0.175258] pci 0000:03:00.1: PME# supported from D0 D3hot D3cold [ 0.175401] pci 0000:03:00.2: [14e4:16be] type 00 class 0x088000 [ 0.175445] pci 0000:03:00.2: reg 0x10: [mem 0xf0430000-0xf043ffff 64bit pref] [ 0.175616] pci 0000:03:00.2: PME# supported from D0 D3hot D3cold [ 0.175752] pci 0000:03:00.3: [14e4:16bf] type 00 class 0x088000 [ 0.175796] pci 0000:03:00.3: reg 0x10: [mem 0xf0440000-0xf044ffff 64bit pref] [ 0.175967] pci 0000:03:00.3: PME# supported from D0 D3hot D3cold [ 0.176162] pci 0000:00:1c.3: PCI bridge to [bus 03] [ 0.176171] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf04fffff 64bit pref] [ 0.176825] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.176910] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.176994] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.177076] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.177160] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.177243] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.177332] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.177414] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.177655] ACPI: EC: interrupt unblocked [ 0.177663] ACPI: EC: event unblocked [ 0.177668] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.177670] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions and events [ 0.177740] SCSI subsystem initialized [ 0.177740] libata version 3.00 loaded. [ 0.177740] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.177740] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.177740] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.177740] vgaarb: loaded [ 0.177740] ACPI: bus type USB registered [ 0.177740] usbcore: registered new interface driver usbfs [ 0.177740] usbcore: registered new interface driver hub [ 0.177740] usbcore: registered new device driver usb [ 0.177740] pps_core: LinuxPPS API ver. 1 registered [ 0.177740] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.177740] PTP clock support registered [ 0.177740] EDAC MC: Ver: 3.0.0 [ 0.177740] Registered efivars operations [ 0.177740] PCI: Using ACPI for IRQ routing [ 0.178855] PCI: pci_cache_line_size set to 64 bytes [ 0.179014] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] [ 0.179015] e820: reserve RAM buffer [mem 0xd66af000-0xd7ffffff] [ 0.179016] e820: reserve RAM buffer [mem 0xd7000000-0xd7ffffff] [ 0.179017] e820: reserve RAM buffer [mem 0x11fe00000-0x11fffffff] [ 0.179137] NetLabel: Initializing [ 0.179138] NetLabel: domain hash size = 128 [ 0.179139] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.179153] NetLabel: unlabeled traffic allowed by default [ 0.179170] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.179170] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.182317] clocksource: Switched to clocksource tsc-early [ 0.194811] VFS: Disk quotas dquot_6.6.0 [ 0.194833] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.194864] *** VALIDATE hugetlbfs *** [ 0.194951] AppArmor: AppArmor Filesystem Enabled [ 0.194980] pnp: PnP ACPI init [ 0.195151] system 00:00: [io 0x1000-0x100f] has been reserved [ 0.195152] system 00:00: [io 0xffff] has been reserved [ 0.195153] system 00:00: [io 0xffff] has been reserved [ 0.195155] system 00:00: [io 0x0400-0x0453] has been reserved [ 0.195157] system 00:00: [io 0x0458-0x047f] has been reserved [ 0.195158] system 00:00: [io 0x0500-0x057f] has been reserved [ 0.195160] system 00:00: [mem 0xfe800000-0xfe80ffff] has been reserved [ 0.195166] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.195193] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.195256] system 00:02: [io 0x0454-0x0457] has been reserved [ 0.195260] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.195349] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.195370] pnp 00:04: Plug and Play ACPI device, IDs SYN1b45 SYN1b00 SYN0002 PNP0f13 (active) [ 0.195552] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.195554] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.195555] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.195556] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.195558] system 00:05: [mem 0xf8000000-0xfbffffff] could not be reserved [ 0.195559] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.195560] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.195561] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.195562] system 00:05: [mem 0xff000000-0xffffffff] has been reserved [ 0.195564] system 00:05: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.195567] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.195855] system 00:06: [mem 0x20000000-0x201fffff] has been reserved [ 0.195856] system 00:06: [mem 0x40000000-0x401fffff] has been reserved [ 0.195860] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.195890] pnp: PnP ACPI: found 7 devices [ 0.197293] thermal_sys: Registered thermal governor 'fair_share' [ 0.197294] thermal_sys: Registered thermal governor 'bang_bang' [ 0.197295] thermal_sys: Registered thermal governor 'step_wise' [ 0.197296] thermal_sys: Registered thermal governor 'user_space' [ 0.197297] thermal_sys: Registered thermal governor 'power_allocator' [ 0.201788] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.201820] pci 0000:03:00.0: can't claim BAR 6 [mem 0xfffff800-0xffffffff pref]: no compatible bridge window [ 0.201831] pci 0000:00:1c.3: BAR 14: assigned [mem 0xdfa00000-0xdfafffff] [ 0.201833] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.201850] pci 0000:00:1c.1: PCI bridge to [bus 02] [ 0.201856] pci 0000:00:1c.1: bridge window [mem 0xf0500000-0xf05fffff] [ 0.201868] pci 0000:03:00.0: BAR 6: assigned [mem 0xdfa00000-0xdfa007ff pref] [ 0.201869] pci 0000:00:1c.3: PCI bridge to [bus 03] [ 0.201875] pci 0000:00:1c.3: bridge window [mem 0xdfa00000-0xdfafffff] [ 0.201879] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf04fffff 64bit pref] [ 0.201888] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.201889] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.201890] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.201891] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfeafffff window] [ 0.201892] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff window] [ 0.201894] pci_bus 0000:02: resource 1 [mem 0xf0500000-0xf05fffff] [ 0.201895] pci_bus 0000:03: resource 1 [mem 0xdfa00000-0xdfafffff] [ 0.201896] pci_bus 0000:03: resource 2 [mem 0xf0400000-0xf04fffff 64bit pref] [ 0.202001] NET: Registered protocol family 2 [ 0.202204] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear) [ 0.202240] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.202346] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear) [ 0.202401] TCP: Hash tables configured (established 32768 bind 32768) [ 0.202449] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.202468] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.202559] NET: Registered protocol family 1 [ 0.202565] NET: Registered protocol family 44 [ 0.202577] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.203053] PCI: CLS 64 bytes, default 64 [ 0.203101] Trying to unpack rootfs image as initramfs... [ 0.346762] Freeing initrd memory: 46772K [ 0.346825] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.346827] software IO TLB: mapped [mem 0xcf99f000-0xd399f000] (64MB) [ 0.347059] check: Scanning for low memory corruption every 60 seconds [ 0.349205] Initialise system trusted keyrings [ 0.349214] Key type blacklist registered [ 0.349252] workingset: timestamp_bits=36 max_order=20 bucket_order=0 [ 0.350689] zbud: loaded [ 0.351084] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.351253] fuse: init (API version 7.31) [ 0.351372] Platform Keyring initialized [ 0.357316] Key type asymmetric registered [ 0.357317] Asymmetric key parser 'x509' registered [ 0.357329] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) [ 0.357374] io scheduler mq-deadline registered [ 0.357783] pcieport 0000:00:1c.1: enabling device (0000 -> 0002) [ 0.358189] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.358258] efifb: probing for efifb [ 0.358278] efifb: No BGRT, not showing boot graphics [ 0.358279] efifb: framebuffer at 0xe0000000, using 3072k, total 3072k [ 0.358280] efifb: mode is 1024x768x32, linelength=4096, pages=1 [ 0.358281] efifb: scrolling: redraw [ 0.358282] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.358329] fbcon: Deferring console take-over [ 0.358330] fb0: EFI VGA frame buffer device [ 0.358338] intel_idle: MWAIT substates: 0x21120 [ 0.358339] intel_idle: v0.4.1 model 0x2A [ 0.358549] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.358705] ACPI: AC Adapter [ADP1] (on-line) [ 0.358772] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 0.358785] ACPI: Lid Switch [LID0] [ 0.358817] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 0.358826] ACPI: Sleep Button [SLPB] [ 0.358856] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.358863] ACPI: Power Button [PWRF] [ 0.360426] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.360428] ACPI: Thermal Zone [TZS0] (46 C) [ 0.360752] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.360753] ACPI: Thermal Zone [TZS1] (29 C) [ 0.360883] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.360905] battery: ACPI: Battery Slot [BAT0] (battery absent) [ 0.362570] Linux agpgart interface v0.103 [ 0.364800] loop: module loaded [ 0.365055] libphy: Fixed MDIO Bus: probed [ 0.365056] tun: Universal TUN/TAP device driver, 1.6 [ 0.365088] PPP generic driver version 2.4.2 [ 0.365126] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.365129] ehci-pci: EHCI PCI platform driver [ 0.365300] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.365309] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.365322] ehci-pci 0000:00:1a.0: debug port 2 [ 0.369237] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 0.369252] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf060a000 [ 0.381404] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.381499] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03 [ 0.381501] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.381502] usb usb1: Product: EHCI Host Controller [ 0.381503] usb usb1: Manufacturer: Linux 5.3.0-40-generic ehci_hcd [ 0.381504] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.381737] hub 1-0:1.0: USB hub found [ 0.381746] hub 1-0:1.0: 2 ports detected [ 0.382022] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.382028] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.382039] ehci-pci 0000:00:1d.0: debug port 2 [ 0.385930] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 0.385944] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf0609000 [ 0.401399] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.401500] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03 [ 0.401501] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.401503] usb usb2: Product: EHCI Host Controller [ 0.401504] usb usb2: Manufacturer: Linux 5.3.0-40-generic ehci_hcd [ 0.401505] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.401751] hub 2-0:1.0: USB hub found [ 0.401760] hub 2-0:1.0: 2 ports detected [ 0.401898] ehci-platform: EHCI generic platform driver [ 0.401915] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.401920] ohci-pci: OHCI PCI platform driver [ 0.401931] ohci-platform: OHCI generic platform driver [ 0.401938] uhci_hcd: USB Universal Host Controller Interface driver [ 0.402002] i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.404529] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.404533] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.404718] mousedev: PS/2 mouse device common for all mice [ 0.404899] rtc_cmos 00:01: RTC can wake from S4 [ 0.405035] rtc_cmos 00:01: registered as rtc0 [ 0.405052] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.405058] i2c /dev entries driver [ 0.405102] device-mapper: uevent: version 1.0.3 [ 0.405159] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com [ 0.405178] platform eisa.0: Probing EISA bus 0 [ 0.405180] platform eisa.0: EISA: Cannot allocate resource for mainboard [ 0.405181] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 0.405183] platform eisa.0: Cannot allocate resource for EISA slot 2 [ 0.405184] platform eisa.0: Cannot allocate resource for EISA slot 3 [ 0.405185] platform eisa.0: Cannot allocate resource for EISA slot 4 [ 0.405186] platform eisa.0: Cannot allocate resource for EISA slot 5 [ 0.405187] platform eisa.0: Cannot allocate resource for EISA slot 6 [ 0.405188] platform eisa.0: Cannot allocate resource for EISA slot 7 [ 0.405189] platform eisa.0: Cannot allocate resource for EISA slot 8 [ 0.405190] platform eisa.0: EISA: Detected 0 cards [ 0.405195] intel_pstate: Intel P-state driver initializing [ 0.405423] ledtrig-cpu: registered to indicate activity on CPUs [ 0.405428] EFI Variables Facility v0.08 2004-May-17 [ 0.414605] NET: Registered protocol family 10 [ 0.421143] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 0.423580] Segment Routing with IPv6 [ 0.423607] NET: Registered protocol family 17 [ 0.423673] Key type dns_resolver registered [ 0.423892] RAS: Correctable Errors collector initialized. [ 0.423926] microcode: sig=0x206a7, pf=0x10, revision=0x2f [ 0.423968] microcode: Microcode Update Driver: v2.2. [ 0.423978] sched_clock: Marking stable (423733158, 230659)->(428915019, -4951202) [ 0.424103] registered taskstats version 1 [ 0.424111] Loading compiled-in X.509 certificates [ 0.426463] Loaded X.509 cert 'Build time autogenerated kernel key: 9c21ebfd2d85db5aed45c3b325f02e1590559b94' [ 0.426504] zswap: loaded using pool lzo/zbud [ 0.434500] Key type big_key registered [ 0.438466] Key type encrypted registered [ 0.438469] AppArmor: AppArmor sha1 policy hashing enabled [ 0.439139] ima: No TPM chip found, activating TPM-bypass! [ 0.439145] ima: Allocated hash algorithm: sha1 [ 0.439152] No architecture policies found [ 0.439161] evm: Initialising EVM extended attributes: [ 0.439162] evm: security.selinux [ 0.439162] evm: security.SMACK64 [ 0.439162] evm: security.SMACK64EXEC [ 0.439163] evm: security.SMACK64TRANSMUTE [ 0.439163] evm: security.SMACK64MMAP [ 0.439163] evm: security.apparmor [ 0.439164] evm: security.ima [ 0.439164] evm: security.capability [ 0.439165] evm: HMAC attrs: 0x1 [ 0.439507] PM: Magic number: 12:456:706 [ 0.439619] rtc_cmos 00:01: setting system clock to 2020-03-12T23:40:50 UTC (1584056450) [ 0.441281] Freeing unused decrypted memory: 2040K [ 0.441796] Freeing unused kernel image memory: 2668K [ 0.473406] Write protecting the kernel read-only data: 22528k [ 0.473994] Freeing unused kernel image memory: 2008K [ 0.474271] Freeing unused kernel image memory: 1420K [ 0.485333] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 0.485334] x86/mm: Checking user space page tables [ 0.496198] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 0.496201] Run /init as init process [ 0.597822] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00) [ 0.601712] bcma-pci-bridge 0000:02:00.0: bus0: Found chip with id 43227, rev 0x00 and package 0x08 [ 0.601740] bcma-pci-bridge 0000:02:00.0: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x25, class 0x0) [ 0.601748] sdhci: Secure Digital Host Controller Interface driver [ 0.601749] sdhci: Copyright(c) Pierre Ossman [ 0.601766] bcma-pci-bridge 0000:02:00.0: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x1E, class 0x0) [ 0.601811] bcma-pci-bridge 0000:02:00.0: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x12, class 0x0) [ 0.601834] bcma-pci-bridge 0000:02:00.0: bus0: Core 3 found: SDIO Device (manuf 0x4BF, id 0x829, rev 0x07, class 0x0) [ 0.603514] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20190703/utaddress-204) [ 0.603521] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 0.603530] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20190703/utaddress-204) [ 0.603535] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 0.603536] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20190703/utaddress-204) [ 0.603540] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 0.603541] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20190703/utaddress-204) [ 0.603545] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 0.603545] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 0.603863] tg3.c:v3.137 (May 11, 2014) [ 0.607459] sdhci-pci 0000:03:00.1: SDHCI controller found [14e4:16bc] (rev 10) [ 0.608283] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.609114] mmc0: SDHCI controller on PCI [0000:03:00.1] using ADMA 64-bit [ 0.620512] bcma-pci-bridge 0000:02:00.0: bus0: Bus registered [ 0.625052] tg3 0000:03:00.0 eth0: Tigon3 [partno(BCM57785) rev 57785100] (PCI Express) MAC address 20:6a:8a:58:0d:3d [ 0.625055] tg3 0000:03:00.0 eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) [ 0.625057] tg3 0000:03:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 0.625059] tg3 0000:03:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit] [ 0.629851] ahci 0000:00:1f.2: version 3.0 [ 0.630115] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 0.641361] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x23 impl SATA mode [ 0.641366] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst [ 0.645418] tg3 0000:03:00.0 enp3s0f0: renamed from eth0 [ 0.665932] scsi host0: ahci [ 0.666086] scsi host1: ahci [ 0.666297] scsi host2: ahci [ 0.666410] scsi host3: ahci [ 0.666545] scsi host4: ahci [ 0.666640] scsi host5: ahci [ 0.666692] ata1: SATA max UDMA/133 abar m2048@0xf0608000 port 0xf0608100 irq 27 [ 0.666694] ata2: SATA max UDMA/133 abar m2048@0xf0608000 port 0xf0608180 irq 27 [ 0.666694] ata3: DUMMY [ 0.666695] ata4: DUMMY [ 0.666696] ata5: DUMMY [ 0.666697] ata6: SATA max UDMA/133 abar m2048@0xf0608000 port 0xf0608380 irq 27 [ 0.717355] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 0.741406] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 0.874182] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 0.874183] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 0.874496] hub 1-1:1.0: USB hub found [ 0.874806] hub 1-1:1.0: 6 ports detected [ 0.897845] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 0.897851] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 0.898207] hub 2-1:1.0: USB hub found [ 0.898265] hub 2-1:1.0: 6 ports detected [ 0.985332] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.154473] ata1.00: ATA-8: WDC WD6400BPVT-22HXZT1, 01.01A01, max UDMA/133 [ 1.154479] ata1.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.158079] ata1.00: configured for UDMA/133 [ 1.158558] scsi 0:0:0:0: Direct-Access ATA WDC WD6400BPVT-2 1A01 PQ: 0 ANSI: 5 [ 1.158871] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.158966] sd 0:0:0:0: [sda] 1250263728 512-byte logical blocks: (640 GB/596 GiB) [ 1.158968] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 1.158986] sd 0:0:0:0: [sda] Write Protect is off [ 1.158989] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.159067] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.161297] usb 1-1.2: new low-speed USB device number 3 using ehci-pci [ 1.189369] usb 2-1.2: new low-speed USB device number 3 using ehci-pci [ 1.217822] sda: sda1 sda2 [ 1.218818] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.274569] usb 1-1.2: New USB device found, idVendor=046d, idProduct=c077, bcdDevice=72.00 [ 1.274571] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.274572] usb 1-1.2: Product: USB Optical Mouse [ 1.274573] usb 1-1.2: Manufacturer: Logitech [ 1.278754] hidraw: raw HID events driver (C) Jiri Kosina [ 1.282341] usbcore: registered new interface driver usbhid [ 1.282342] usbhid: USB HID core driver [ 1.284682] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:046D:C077.0001/input/input6 [ 1.284781] hid-generic 0003:046D:C077.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1a.0-1.2/input0 [ 1.290916] psmouse serio1: synaptics: queried max coordinates: x [..5576], y [..4880] [ 1.303085] usb 2-1.2: New USB device found, idVendor=046d, idProduct=c31c, bcdDevice=64.00 [ 1.303087] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.303089] usb 2-1.2: Product: USB Keyboard [ 1.303090] usb 2-1.2: Manufacturer: Logitech [ 1.305817] random: fast init done [ 1.305971] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.305981] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.305993] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.308852] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:046D:C31C.0002/input/input7 [ 1.345989] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1c0b1, caps: 0xd04771/0xa40000/0xa0400/0x0, board id: 0, fw id: 641896 [ 1.349390] tsc: Refined TSC clocksource calibration: 2394.562 MHz [ 1.349416] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x22842644443, max_idle_ns: 440795204673 ns [ 1.349466] clocksource: Switched to clocksource tsc [ 1.365684] hid-generic 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:1d.0-1.2/input0 [ 1.371839] input: Logitech USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/0003:046D:C31C.0003/input/input8 [ 1.380927] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5 [ 1.429632] input: Logitech USB Keyboard System Control as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/0003:046D:C31C.0003/input/input9 [ 1.429838] hid-generic 0003:046D:C31C.0003: input,hidraw2: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:1d.0-1.2/input1 [ 1.472810] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.475932] ata2.00: ATAPI: Slimtype DVD A DS8A5SH, XA15, max UDMA/100 [ 1.477351] ata2.00: configured for UDMA/100 [ 1.483030] scsi 1:0:0:0: CD-ROM Slimtype DVD A DS8A5SH XA15 PQ: 0 ANSI: 5 [ 1.552524] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/8x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.552526] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.552812] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.552899] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.869406] ata6: SATA link down (SStatus 0 SControl 300) [ 2.337550] fbcon: Taking over console [ 2.337640] Console: switching to colour frame buffer device 128x48 [ 2.449745] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 4.265819] systemd[1]: Inserted module 'autofs4' [ 4.462989] systemd[1]: systemd 242 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 4.481553] systemd[1]: Detected architecture x86-64. [ 4.502110] systemd[1]: Set hostname to . [ 4.516334] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument [ 4.846100] random: crng init done [ 4.846105] random: 7 urandom warning(s) missed due to ratelimiting [ 7.282041] systemd[1]: /lib/systemd/system/dbus.socket:4: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly. [ 8.503262] systemd[1]: Reached target Remote File Systems. [ 8.520395] systemd[1]: Listening on Syslog Socket. [ 8.520522] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.520537] systemd[1]: Reached target User and Group Name Lookups. [ 8.521146] systemd[1]: Created slice User and Session Slice. [ 8.815885] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro [ 9.002390] systemd-journald[336]: Received request to flush runtime journal from PID 1 [ 9.217368] Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k FS [ 9.684144] lp: driver loaded but no devices found [ 9.688778] ppdev: user-space parallel port driver [ 17.251779] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer [ 17.251781] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules [ 17.251781] RAPL PMU: hw unit of domain package 2^-16 Joules [ 17.251782] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules [ 17.422395] acer_wmi: Acer Laptop ACPI-WMI Extras [ 17.422415] acer_wmi: Function bitmap for Communication Button: 0x1 [ 17.423680] input: Acer WMI hotkeys as /devices/virtual/input/input10 [ 17.563869] cryptd: max_cpu_qlen set to 1000 [ 17.902380] AVX version of gcm_enc/dec engaged. [ 17.902381] AES CTR mode by8 optimization enabled [ 19.295016] checking generic (e0000000 300000) vs hw (e0000000 10000000) [ 19.295017] fb0: switching to inteldrmfb from EFI VGA [ 19.295100] Console: switching to colour dummy device 80x25 [ 19.295133] i915 0000:00:02.0: vgaarb: deactivate vga console [ 19.295846] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 19.295846] [drm] Driver supports precise vblank timestamp query. [ 19.296731] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 19.327392] [drm] Initialized i915 1.6.0 20190619 for 0000:00:02.0 on minor 0 [ 19.328242] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 19.331253] acpi device:37: registered as cooling_device4 [ 19.331332] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input11 [ 19.344078] fbcon: i915drmfb (fb0) is primary device [ 19.344163] Console: switching to colour frame buffer device 170x48 [ 19.344180] i915 0000:00:02.0: fb0: i915drmfb frame buffer device [ 19.697416] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 19.700023] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 20.179890] b43-phy0: Broadcom 43227 WLAN found (core revision 30) [ 20.180341] b43-phy0: Found PHY: Analog 9, Type 4 (N), Revision 16 [ 20.180351] b43-phy0: Found Radio: Manuf 0x17F, ID 0x2057, Revision 9, Version 1 [ 20.180860] Broadcom 43xx driver loaded [ Features: PNL ] [ 20.288271] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 20.339454] intel_rapl_common: Found RAPL domain package [ 20.339456] intel_rapl_common: Found RAPL domain core [ 20.339457] intel_rapl_common: Found RAPL domain uncore [ 20.339463] intel_rapl_common: RAPL package-0 domain package locked by BIOS [ 20.384088] b43 bcma0:1 wlp2s0b1: renamed from wlan0 [ 20.419185] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 20.741967] snd_hda_codec_realtek hdaudioC0D0: ALC269VB: SKU not ready 0x598301f0 [ 20.742253] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VB: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 20.742256] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 20.742258] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 20.742259] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 20.742260] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 20.742262] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x1b [ 20.742264] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18 [ 20.828021] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 20.828099] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 20.828172] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 [ 29.234206] audit: type=1400 audit(1584056479.289:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=760 comm="apparmor_parser" [ 29.285400] audit: type=1400 audit(1584056479.341:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=757 comm="apparmor_parser" [ 29.315500] audit: type=1400 audit(1584056479.369:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=766 comm="apparmor_parser" [ 29.337949] audit: type=1400 audit(1584056479.393:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=758 comm="apparmor_parser" [ 29.337958] audit: type=1400 audit(1584056479.393:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=758 comm="apparmor_parser" [ 29.337961] audit: type=1400 audit(1584056479.393:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=758 comm="apparmor_parser" [ 29.337964] audit: type=1400 audit(1584056479.393:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=758 comm="apparmor_parser" [ 29.445967] audit: type=1400 audit(1584056479.501:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=767 comm="apparmor_parser" [ 29.445974] audit: type=1400 audit(1584056479.501:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=767 comm="apparmor_parser" [ 29.445977] audit: type=1400 audit(1584056479.501:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=767 comm="apparmor_parser" [ 44.297345] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07) [ 45.330475] b43-phy0 ERROR: Radio 0x2057 rcal timeout [ 45.697514] tg3 0000:03:00.0 enp3s0f0: Link is up at 100 Mbps, full duplex [ 45.697517] tg3 0000:03:00.0 enp3s0f0: Flow control is on for TX and on for RX [ 45.697518] tg3 0000:03:00.0 enp3s0f0: EEE is disabled [ 46.548635] tg3 0000:03:00.0 enp3s0f0: Link is down [ 48.171851] tg3 0000:03:00.0 enp3s0f0: Link is up at 100 Mbps, full duplex [ 48.171853] tg3 0000:03:00.0 enp3s0f0: Flow control is on for TX and on for RX [ 48.171854] tg3 0000:03:00.0 enp3s0f0: EEE is disabled [ 49.039380] tg3 0000:03:00.0 enp3s0f0: Link is down [ 50.666373] tg3 0000:03:00.0 enp3s0f0: Link is up at 100 Mbps, full duplex [ 50.666375] tg3 0000:03:00.0 enp3s0f0: Flow control is on for TX and on for RX [ 50.666376] tg3 0000:03:00.0 enp3s0f0: EEE is disabled [ 51.529882] tg3 0000:03:00.0 enp3s0f0: Link is down [ 53.158089] tg3 0000:03:00.0 enp3s0f0: Link is up at 100 Mbps, full duplex [ 53.158091] tg3 0000:03:00.0 enp3s0f0: Flow control is on for TX and on for RX [ 53.158092] tg3 0000:03:00.0 enp3s0f0: EEE is disabled [ 54.020453] tg3 0000:03:00.0 enp3s0f0: Link is down [ 55.714000] tg3 0000:03:00.0 enp3s0f0: Link is up at 100 Mbps, full duplex [ 55.714002] tg3 0000:03:00.0 enp3s0f0: Flow control is on for TX and on for RX [ 55.714003] tg3 0000:03:00.0 enp3s0f0: EEE is disabled [ 56.641873] tg3 0000:03:00.0 enp3s0f0: Link is down [ 58.294802] tg3 0000:03:00.0 enp3s0f0: Link is up at 100 Mbps, full duplex [ 58.294804] tg3 0000:03:00.0 enp3s0f0: Flow control is on for TX and on for RX [ 58.294805] tg3 0000:03:00.0 enp3s0f0: EEE is disabled [ 59.132163] tg3 0000:03:00.0 enp3s0f0: Link is down [ 60.337321] b43-phy0 ERROR: Radio 0x2057 rcal timeout [ 60.470579] b43-phy0: Radio hardware status changed to DISABLED [ 60.529445] b43-phy0: Radio turned on by software [ 60.529450] b43-phy0: The hardware RF-kill button still turns the radio physically off. Press the button to turn it on. [ 60.755011] tg3 0000:03:00.0 enp3s0f0: Link is up at 100 Mbps, full duplex [ 60.755012] tg3 0000:03:00.0 enp3s0f0: Flow control is on for TX and on for RX [ 60.755013] tg3 0000:03:00.0 enp3s0f0: EEE is disabled [ 60.755033] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0f0: link becomes ready [ 61.622485] tg3 0000:03:00.0 enp3s0f0: Link is down [ 63.249706] tg3 0000:03:00.0 enp3s0f0: Link is up at 100 Mbps, full duplex [ 63.249740] tg3 0000:03:00.0 enp3s0f0: Flow control is on for TX and on for RX [ 63.249751] tg3 0000:03:00.0 enp3s0f0: EEE is disabled [ 64.113339] tg3 0000:03:00.0 enp3s0f0: Link is down [ 65.741269] tg3 0000:03:00.0 enp3s0f0: Link is up at 100 Mbps, full duplex [ 65.741274] tg3 0000:03:00.0 enp3s0f0: Flow control is on for TX and on for RX [ 65.741277] tg3 0000:03:00.0 enp3s0f0: EEE is disabled [ 66.603656] tg3 0000:03:00.0 enp3s0f0: Link is down [ 68.237954] tg3 0000:03:00.0 enp3s0f0: Link is up at 100 Mbps, full duplex [ 68.237956] tg3 0000:03:00.0 enp3s0f0: Flow control is on for TX and on for RX [ 68.237958] tg3 0000:03:00.0 enp3s0f0: EEE is disabled [ 69.093834] tg3 0000:03:00.0 enp3s0f0: Link is down [ 70.716800] tg3 0000:03:00.0 enp3s0f0: Link is up at 100 Mbps, full duplex [ 70.716817] tg3 0000:03:00.0 enp3s0f0: Flow control is on for TX and on for RX [ 70.716820] tg3 0000:03:00.0 enp3s0f0: EEE is disabled [ 70.946074] rfkill: input handler disabled [ 71.583904] tg3 0000:03:00.0 enp3s0f0: Link is down [ 73.207329] tg3 0000:03:00.0 enp3s0f0: Link is up at 100 Mbps, full duplex [ 73.207380] tg3 0000:03:00.0 enp3s0f0: Flow control is on for TX and on for RX [ 73.207397] tg3 0000:03:00.0 enp3s0f0: EEE is disabled [ 74.074917] tg3 0000:03:00.0 enp3s0f0: Link is down [ 75.704118] tg3 0000:03:00.0 enp3s0f0: Link is up at 100 Mbps, full duplex [ 75.704158] tg3 0000:03:00.0 enp3s0f0: Flow control is on for TX and on for RX [ 75.704166] tg3 0000:03:00.0 enp3s0f0: EEE is disabled [ 76.564732] tg3 0000:03:00.0 enp3s0f0: Link is down [ 78.279571] tg3 0000:03:00.0 enp3s0f0: Link is up at 100 Mbps, full duplex [ 78.279604] tg3 0000:03:00.0 enp3s0f0: Flow control is on for TX and on for RX [ 78.279622] tg3 0000:03:00.0 enp3s0f0: EEE is disabled [ 79.186295] tg3 0000:03:00.0 enp3s0f0: Link is down [ 80.821152] tg3 0000:03:00.0 enp3s0f0: Link is up at 100 Mbps, full duplex [ 80.821189] tg3 0000:03:00.0 enp3s0f0: Flow control is on for TX and on for RX [ 80.821197] tg3 0000:03:00.0 enp3s0f0: EEE is disabled [ 81.676658] tg3 0000:03:00.0 enp3s0f0: Link is down [ 83.300168] tg3 0000:03:00.0 enp3s0f0: Link is up at 100 Mbps, full duplex [ 83.300204] tg3 0000:03:00.0 enp3s0f0: Flow control is on for TX and on for RX [ 83.300212] tg3 0000:03:00.0 enp3s0f0: EEE is disabled [ 84.167022] tg3 0000:03:00.0 enp3s0f0: Link is down [ 85.790060] tg3 0000:03:00.0 enp3s0f0: Link is up at 100 Mbps, full duplex [ 85.790102] tg3 0000:03:00.0 enp3s0f0: Flow control is on for TX and on for RX [ 85.790120] tg3 0000:03:00.0 enp3s0f0: EEE is disabled [ 86.657541] tg3 0000:03:00.0 enp3s0f0: Link is down [ 88.286677] tg3 0000:03:00.0 enp3s0f0: Link is up at 100 Mbps, full duplex [ 88.286680] tg3 0000:03:00.0 enp3s0f0: Flow control is on for TX and on for RX [ 88.286681] tg3 0000:03:00.0 enp3s0f0: EEE is disabled [ 88.359783] rfkill: input handler enabled [ 89.147874] tg3 0000:03:00.0 enp3s0f0: Link is down [ 90.783822] tg3 0000:03:00.0 enp3s0f0: Link is up at 100 Mbps, full duplex [ 90.783827] tg3 0000:03:00.0 enp3s0f0: Flow control is on for TX and on for RX [ 90.783829] tg3 0000:03:00.0 enp3s0f0: EEE is disabled [ 91.639088] tg3 0000:03:00.0 enp3s0f0: Link is down [ 93.275344] tg3 0000:03:00.0 enp3s0f0: Link is up at 100 Mbps, full duplex [ 93.275357] tg3 0000:03:00.0 enp3s0f0: Flow control is on for TX and on for RX [ 93.275363] tg3 0000:03:00.0 enp3s0f0: EEE is disabled [ 94.128650] tg3 0000:03:00.0 enp3s0f0: Link is down [ 95.752835] tg3 0000:03:00.0 enp3s0f0: Link is up at 100 Mbps, full duplex [ 95.752873] tg3 0000:03:00.0 enp3s0f0: Flow control is on for TX and on for RX [ 95.752881] tg3 0000:03:00.0 enp3s0f0: EEE is disabled [ 96.619045] tg3 0000:03:00.0 enp3s0f0: Link is down [ 98.249655] tg3 0000:03:00.0 enp3s0f0: Link is up at 100 Mbps, full duplex [ 98.249705] tg3 0000:03:00.0 enp3s0f0: Flow control is on for TX and on for RX [ 98.249716] tg3 0000:03:00.0 enp3s0f0: EEE is disabled [ 99.109643] tg3 0000:03:00.0 enp3s0f0: Link is down [ 100.741420] tg3 0000:03:00.0 enp3s0f0: Link is up at 100 Mbps, full duplex [ 100.741457] tg3 0000:03:00.0 enp3s0f0: Flow control is on for TX and on for RX [ 100.741468] tg3 0000:03:00.0 enp3s0f0: EEE is disabled [ 101.599909] tg3 0000:03:00.0 enp3s0f0: Link is down [ 102.426545] rfkill: input handler disabled [ 103.238130] tg3 0000:03:00.0 enp3s0f0: Link is up at 100 Mbps, full duplex [ 103.238133] tg3 0000:03:00.0 enp3s0f0: Flow control is on for TX and on for RX [ 103.238135] tg3 0000:03:00.0 enp3s0f0: EEE is disabled [ 104.091107] tg3 0000:03:00.0 enp3s0f0: Link is down [ 105.715589] tg3 0000:03:00.0 enp3s0f0: Link is up at 100 Mbps, full duplex [ 105.715595] tg3 0000:03:00.0 enp3s0f0: Flow control is on for TX and on for RX [ 105.715598] tg3 0000:03:00.0 enp3s0f0: EEE is disabled [ 106.581059] tg3 0000:03:00.0 enp3s0f0: Link is down [ 108.207232] tg3 0000:03:00.0 enp3s0f0: Link is up at 100 Mbps, full duplex [ 108.207271] tg3 0000:03:00.0 enp3s0f0: Flow control is on for TX and on for RX [ 108.207276] tg3 0000:03:00.0 enp3s0f0: EEE is disabled [ 109.071345] tg3 0000:03:00.0 enp3s0f0: Link is down [ 110.704152] tg3 0000:03:00.0 enp3s0f0: Link is up at 100 Mbps, full duplex [ 110.704185] tg3 0000:03:00.0 enp3s0f0: Flow control is on for TX and on for RX [ 110.704205] tg3 0000:03:00.0 enp3s0f0: EEE is disabled [ 111.561549] tg3 0000:03:00.0 enp3s0f0: Link is down [ 113.184907] tg3 0000:03:00.0 enp3s0f0: Link is up at 100 Mbps, full duplex [ 113.184951] tg3 0000:03:00.0 enp3s0f0: Flow control is on for TX and on for RX [ 113.184966] tg3 0000:03:00.0 enp3s0f0: EEE is disabled [ 114.052531] tg3 0000:03:00.0 enp3s0f0: Link is down [ 115.678333] tg3 0000:03:00.0 enp3s0f0: Link is up at 100 Mbps, full duplex [ 115.678370] tg3 0000:03:00.0 enp3s0f0: Flow control is on for TX and on for RX [ 115.678378] tg3 0000:03:00.0 enp3s0f0: EEE is disabled [ 116.542604] tg3 0000:03:00.0 enp3s0f0: Link is down [ 118.169975] tg3 0000:03:00.0 enp3s0f0: Link is up at 100 Mbps, full duplex [ 118.169981] tg3 0000:03:00.0 enp3s0f0: Flow control is on for TX and on for RX [ 118.169984] tg3 0000:03:00.0 enp3s0f0: EEE is disabled [ 119.033772] tg3 0000:03:00.0 enp3s0f0: Link is down [ 120.686512] tg3 0000:03:00.0 enp3s0f0: Link is up at 100 Mbps, full duplex [ 120.686552] tg3 0000:03:00.0 enp3s0f0: Flow control is on for TX and on for RX [ 120.686563] tg3 0000:03:00.0 enp3s0f0: EEE is disabled [ 121.523928] tg3 0000:03:00.0 enp3s0f0: Link is down [ 123.146746] tg3 0000:03:00.0 enp3s0f0: Link is up at 100 Mbps, full duplex [ 123.146782] tg3 0000:03:00.0 enp3s0f0: Flow control is on for TX and on for RX [ 123.146787] tg3 0000:03:00.0 enp3s0f0: EEE is disabled [ 124.014276] tg3 0000:03:00.0 enp3s0f0: Link is down [ 125.674987] tg3 0000:03:00.0 enp3s0f0: Link is up at 100 Mbps, full duplex [ 125.674990] tg3 0000:03:00.0 enp3s0f0: Flow control is on for TX and on for RX [ 125.674991] tg3 0000:03:00.0 enp3s0f0: EEE is disabled [ 125.904729] tg3 0000:03:00.0 enp3s0f0: Link is down [ 141.897950] tg3 0000:03:00.0 enp3s0f0: Link is up at 100 Mbps, full duplex [ 141.897990] tg3 0000:03:00.0 enp3s0f0: Flow control is on for TX and on for RX [ 141.897996] tg3 0000:03:00.0 enp3s0f0: EEE is disabled [ 142.757345] tg3 0000:03:00.0 enp3s0f0: Link is down [ 144.386961] tg3 0000:03:00.0 enp3s0f0: Link is up at 100 Mbps, full duplex [ 144.387007] tg3 0000:03:00.0 enp3s0f0: Flow control is on for TX and on for RX [ 144.387015] tg3 0000:03:00.0 enp3s0f0: EEE is disabled [ 145.247744] tg3 0000:03:00.0 enp3s0f0: Link is down [ 146.878636] tg3 0000:03:00.0 enp3s0f0: Link is up at 100 Mbps, full duplex [ 146.878674] tg3 0000:03:00.0 enp3s0f0: Flow control is on for TX and on for RX [ 146.878682] tg3 0000:03:00.0 enp3s0f0: EEE is disabled [ 147.738161] tg3 0000:03:00.0 enp3s0f0: Link is down [ 149.375552] tg3 0000:03:00.0 enp3s0f0: Link is up at 100 Mbps, full duplex [ 149.375590] tg3 0000:03:00.0 enp3s0f0: Flow control is on for TX and on for RX [ 149.375598] tg3 0000:03:00.0 enp3s0f0: EEE is disabled [ 150.228579] tg3 0000:03:00.0 enp3s0f0: Link is down [ 151.852796] tg3 0000:03:00.0 enp3s0f0: Link is up at 100 Mbps, full duplex [ 151.852830] tg3 0000:03:00.0 enp3s0f0: Flow control is on for TX and on for RX [ 151.852844] tg3 0000:03:00.0 enp3s0f0: EEE is disabled [ 152.718980] tg3 0000:03:00.0 enp3s0f0: Link is down [ 154.344481] tg3 0000:03:00.0 enp3s0f0: Link is up at 100 Mbps, full duplex [ 154.344533] tg3 0000:03:00.0 enp3s0f0: Flow control is on for TX and on for RX [ 154.344540] tg3 0000:03:00.0 enp3s0f0: EEE is disabled [ 155.209402] tg3 0000:03:00.0 enp3s0f0: Link is down [ 156.841381] tg3 0000:03:00.0 enp3s0f0: Link is up at 100 Mbps, full duplex [ 156.841422] tg3 0000:03:00.0 enp3s0f0: Flow control is on for TX and on for RX [ 156.841429] tg3 0000:03:00.0 enp3s0f0: EEE is disabled [ 157.699808] tg3 0000:03:00.0 enp3s0f0: Link is down [ 159.338305] tg3 0000:03:00.0 enp3s0f0: Link is up at 100 Mbps, full duplex [ 159.338342] tg3 0000:03:00.0 enp3s0f0: Flow control is on for TX and on for RX [ 159.338350] tg3 0000:03:00.0 enp3s0f0: EEE is disabled [ 160.190223] tg3 0000:03:00.0 enp3s0f0: Link is down [ 161.894204] tg3 0000:03:00.0 enp3s0f0: Link is up at 100 Mbps, full duplex [ 161.894243] tg3 0000:03:00.0 enp3s0f0: Flow control is on for TX and on for RX [ 161.894251] tg3 0000:03:00.0 enp3s0f0: EEE is disabled [ 162.811708] tg3 0000:03:00.0 enp3s0f0: Link is down [ 164.435458] tg3 0000:03:00.0 enp3s0f0: Link is up at 100 Mbps, full duplex [ 164.435463] tg3 0000:03:00.0 enp3s0f0: Flow control is on for TX and on for RX [ 164.435465] tg3 0000:03:00.0 enp3s0f0: EEE is disabled [ 165.302407] tg3 0000:03:00.0 enp3s0f0: Link is down [ 166.927254] tg3 0000:03:00.0 enp3s0f0: Link is up at 100 Mbps, full duplex [ 166.927275] tg3 0000:03:00.0 enp3s0f0: Flow control is on for TX and on for RX [ 166.927284] tg3 0000:03:00.0 enp3s0f0: EEE is disabled [ 167.792554] tg3 0000:03:00.0 enp3s0f0: Link is down [ 169.424077] tg3 0000:03:00.0 enp3s0f0: Link is up at 100 Mbps, full duplex [ 169.424080] tg3 0000:03:00.0 enp3s0f0: Flow control is on for TX and on for RX [ 169.424081] tg3 0000:03:00.0 enp3s0f0: EEE is disabled [ 170.283194] tg3 0000:03:00.0 enp3s0f0: Link is down [ 171.920871] tg3 0000:03:00.0 enp3s0f0: Link is up at 100 Mbps, full duplex [ 171.920894] tg3 0000:03:00.0 enp3s0f0: Flow control is on for TX and on for RX [ 171.920897] tg3 0000:03:00.0 enp3s0f0: EEE is disabled [ 172.773252] tg3 0000:03:00.0 enp3s0f0: Link is down [ 174.398353] tg3 0000:03:00.0 enp3s0f0: Link is up at 100 Mbps, full duplex [ 174.398392] tg3 0000:03:00.0 enp3s0f0: Flow control is on for TX and on for RX [ 174.398404] tg3 0000:03:00.0 enp3s0f0: EEE is disabled [ 175.263882] tg3 0000:03:00.0 enp3s0f0: Link is down [ 176.889945] tg3 0000:03:00.0 enp3s0f0: Link is up at 100 Mbps, full duplex [ 176.889983] tg3 0000:03:00.0 enp3s0f0: Flow control is on for TX and on for RX [ 176.889995] tg3 0000:03:00.0 enp3s0f0: EEE is disabled [ 177.754232] tg3 0000:03:00.0 enp3s0f0: Link is down [ 179.386836] tg3 0000:03:00.0 enp3s0f0: Link is up at 100 Mbps, full duplex [ 179.386842] tg3 0000:03:00.0 enp3s0f0: Flow control is on for TX and on for RX [ 179.386846] tg3 0000:03:00.0 enp3s0f0: EEE is disabled [ 180.244604] tg3 0000:03:00.0 enp3s0f0: Link is down [ 181.868092] tg3 0000:03:00.0 enp3s0f0: Link is up at 100 Mbps, full duplex [ 181.868126] tg3 0000:03:00.0 enp3s0f0: Flow control is on for TX and on for RX [ 181.868132] tg3 0000:03:00.0 enp3s0f0: EEE is disabled [ 182.734962] tg3 0000:03:00.0 enp3s0f0: Link is down [ 184.358501] tg3 0000:03:00.0 enp3s0f0: Link is up at 100 Mbps, full duplex [ 184.358530] tg3 0000:03:00.0 enp3s0f0: Flow control is on for TX and on for RX [ 184.358536] tg3 0000:03:00.0 enp3s0f0: EEE is disabled [ 185.225457] tg3 0000:03:00.0 enp3s0f0: Link is down [ 186.852827] tg3 0000:03:00.0 enp3s0f0: Link is up at 100 Mbps, full duplex [ 186.852856] tg3 0000:03:00.0 enp3s0f0: Flow control is on for TX and on for RX [ 186.852862] tg3 0000:03:00.0 enp3s0f0: EEE is disabled [ 187.715964] tg3 0000:03:00.0 enp3s0f0: Link is down [ 189.369374] tg3 0000:03:00.0 enp3s0f0: Link is up at 100 Mbps, full duplex [ 189.369413] tg3 0000:03:00.0 enp3s0f0: Flow control is on for TX and on for RX [ 189.369426] tg3 0000:03:00.0 enp3s0f0: EEE is disabled [ 190.206324] tg3 0000:03:00.0 enp3s0f0: Link is down [ 191.841353] tg3 0000:03:00.0 enp3s0f0: Link is up at 100 Mbps, full duplex [ 191.841387] tg3 0000:03:00.0 enp3s0f0: Flow control is on for TX and on for RX [ 191.841393] tg3 0000:03:00.0 enp3s0f0: EEE is disabled [ 192.696584] tg3 0000:03:00.0 enp3s0f0: Link is down [ 194.320226] tg3 0000:03:00.0 enp3s0f0: Link is up at 100 Mbps, full duplex [ 194.320265] tg3 0000:03:00.0 enp3s0f0: Flow control is on for TX and on for RX [ 194.320276] tg3 0000:03:00.0 enp3s0f0: EEE is disabled [ 195.187041] tg3 0000:03:00.0 enp3s0f0: Link is down [ 196.815565] tg3 0000:03:00.0 enp3s0f0: Link is up at 100 Mbps, full duplex [ 196.815571] tg3 0000:03:00.0 enp3s0f0: Flow control is on for TX and on for RX [ 196.815574] tg3 0000:03:00.0 enp3s0f0: EEE is disabled [ 197.677430] tg3 0000:03:00.0 enp3s0f0: Link is down [ 199.307266] tg3 0000:03:00.0 enp3s0f0: Link is up at 100 Mbps, full duplex [ 199.307302] tg3 0000:03:00.0 enp3s0f0: Flow control is on for TX and on for RX [ 199.307308] tg3 0000:03:00.0 enp3s0f0: EEE is disabled [ 200.167889] tg3 0000:03:00.0 enp3s0f0: Link is down [ 201.804143] tg3 0000:03:00.0 enp3s0f0: Link is up at 100 Mbps, full duplex [ 201.804181] tg3 0000:03:00.0 enp3s0f0: Flow control is on for TX and on for RX [ 201.804190] tg3 0000:03:00.0 enp3s0f0: EEE is disabled [ 202.658382] tg3 0000:03:00.0 enp3s0f0: Link is down [ 204.281422] tg3 0000:03:00.0 enp3s0f0: Link is up at 100 Mbps, full duplex [ 204.281454] tg3 0000:03:00.0 enp3s0f0: Flow control is on for TX and on for RX [ 204.281460] tg3 0000:03:00.0 enp3s0f0: EEE is disabled [ 205.148745] tg3 0000:03:00.0 enp3s0f0: Link is down [ 206.773102] tg3 0000:03:00.0 enp3s0f0: Link is up at 100 Mbps, full duplex [ 206.773134] tg3 0000:03:00.0 enp3s0f0: Flow control is on for TX and on for RX [ 206.773139] tg3 0000:03:00.0 enp3s0f0: EEE is disabled [ 207.639103] tg3 0000:03:00.0 enp3s0f0: Link is down [ 209.269765] tg3 0000:03:00.0 enp3s0f0: Link is up at 100 Mbps, full duplex [ 209.269786] tg3 0000:03:00.0 enp3s0f0: Flow control is on for TX and on for RX [ 209.269789] tg3 0000:03:00.0 enp3s0f0: EEE is disabled [ 210.130402] tg3 0000:03:00.0 enp3s0f0: Link is down [ 217.783089] tg3 0000:03:00.0 enp3s0f0: Link is up at 100 Mbps, full duplex [ 217.783133] tg3 0000:03:00.0 enp3s0f0: Flow control is on for TX and on for RX [ 217.783141] tg3 0000:03:00.0 enp3s0f0: EEE is disabled [ 218.649437] tg3 0000:03:00.0 enp3s0f0: Link is down [ 220.278758] tg3 0000:03:00.0 enp3s0f0: Link is up at 100 Mbps, full duplex [ 220.278799] tg3 0000:03:00.0 enp3s0f0: Flow control is on for TX and on for RX [ 220.278805] tg3 0000:03:00.0 enp3s0f0: EEE is disabled [ 221.139849] tg3 0000:03:00.0 enp3s0f0: Link is down [ 222.775671] tg3 0000:03:00.0 enp3s0f0: Link is up at 100 Mbps, full duplex [ 222.775705] tg3 0000:03:00.0 enp3s0f0: Flow control is on for TX and on for RX [ 222.775711] tg3 0000:03:00.0 enp3s0f0: EEE is disabled [ 223.630225] tg3 0000:03:00.0 enp3s0f0: Link is down [ 225.252927] tg3 0000:03:00.0 enp3s0f0: Link is up at 100 Mbps, full duplex [ 225.252967] tg3 0000:03:00.0 enp3s0f0: Flow control is on for TX and on for RX [ 225.252973] tg3 0000:03:00.0 enp3s0f0: EEE is disabled [ 226.120669] tg3 0000:03:00.0 enp3s0f0: Link is down [ 227.744599] tg3 0000:03:00.0 enp3s0f0: Link is up at 100 Mbps, full duplex [ 227.744634] tg3 0000:03:00.0 enp3s0f0: Flow control is on for TX and on for RX [ 227.744640] tg3 0000:03:00.0 enp3s0f0: EEE is disabled [ 228.611075] tg3 0000:03:00.0 enp3s0f0: Link is down [ 230.241450] tg3 0000:03:00.0 enp3s0f0: Link is up at 100 Mbps, full duplex [ 230.241486] tg3 0000:03:00.0 enp3s0f0: Flow control is on for TX and on for RX [ 230.241494] tg3 0000:03:00.0 enp3s0f0: EEE is disabled [ 230.494209] tg3 0000:03:00.0 enp3s0f0: Link is down [ 256.129453] tg3 0000:03:00.0 enp3s0f0: Link is up at 100 Mbps, full duplex [ 256.129486] tg3 0000:03:00.0 enp3s0f0: Flow control is on for TX and on for RX [ 256.129492] tg3 0000:03:00.0 enp3s0f0: EEE is disabled [ 256.364340] tg3 0000:03:00.0 enp3s0f0: Link is down [ 257.929075] tg3 0000:03:00.0 enp3s0f0: Link is up at 100 Mbps, full duplex [ 257.929111] tg3 0000:03:00.0 enp3s0f0: Flow control is on for TX and on for RX [ 257.929116] tg3 0000:03:00.0 enp3s0f0: EEE is disabled [ 258.774589] tg3 0000:03:00.0 enp3s0f0: Link is down [ 260.401096] tg3 0000:03:00.0 enp3s0f0: Link is up at 100 Mbps, full duplex [ 260.401102] tg3 0000:03:00.0 enp3s0f0: Flow control is on for TX and on for RX [ 260.401106] tg3 0000:03:00.0 enp3s0f0: EEE is disabled [ 261.265130] tg3 0000:03:00.0 enp3s0f0: Link is down [ 262.892733] tg3 0000:03:00.0 enp3s0f0: Link is up at 100 Mbps, full duplex [ 262.892742] tg3 0000:03:00.0 enp3s0f0: Flow control is on for TX and on for RX [ 262.892748] tg3 0000:03:00.0 enp3s0f0: EEE is disabled [ 263.755535] tg3 0000:03:00.0 enp3s0f0: Link is down [ 265.409265] tg3 0000:03:00.0 enp3s0f0: Link is up at 100 Mbps, full duplex [ 265.409271] tg3 0000:03:00.0 enp3s0f0: Flow control is on for TX and on for RX [ 265.409274] tg3 0000:03:00.0 enp3s0f0: EEE is disabled [ 266.245961] tg3 0000:03:00.0 enp3s0f0: Link is down [ 267.869370] tg3 0000:03:00.0 enp3s0f0: Link is up at 100 Mbps, full duplex [ 267.869392] tg3 0000:03:00.0 enp3s0f0: Flow control is on for TX and on for RX [ 267.869399] tg3 0000:03:00.0 enp3s0f0: EEE is disabled [ 268.736610] tg3 0000:03:00.0 enp3s0f0: Link is down [ 270.363709] tg3 0000:03:00.0 enp3s0f0: Link is up at 100 Mbps, full duplex [ 270.363711] tg3 0000:03:00.0 enp3s0f0: Flow control is on for TX and on for RX [ 270.363712] tg3 0000:03:00.0 enp3s0f0: EEE is disabled [ 271.227501] tg3 0000:03:00.0 enp3s0f0: Link is down [ 272.855361] tg3 0000:03:00.0 enp3s0f0: Link is up at 100 Mbps, full duplex [ 272.855395] tg3 0000:03:00.0 enp3s0f0: Flow control is on for TX and on for RX [ 272.855412] tg3 0000:03:00.0 enp3s0f0: EEE is disabled [ 273.718019] tg3 0000:03:00.0 enp3s0f0: Link is down [ 275.352360] tg3 0000:03:00.0 enp3s0f0: Link is up at 100 Mbps, full duplex [ 275.352365] tg3 0000:03:00.0 enp3s0f0: Flow control is on for TX and on for RX [ 275.352367] tg3 0000:03:00.0 enp3s0f0: EEE is disabled [ 276.207423] tg3 0000:03:00.0 enp3s0f0: Link is down [ 277.830834] tg3 0000:03:00.0 enp3s0f0: Link is up at 100 Mbps, full duplex [ 277.830840] tg3 0000:03:00.0 enp3s0f0: Flow control is on for TX and on for RX [ 277.830843] tg3 0000:03:00.0 enp3s0f0: EEE is disabled [ 278.698333] tg3 0000:03:00.0 enp3s0f0: Link is down [ 280.321078] tg3 0000:03:00.0 enp3s0f0: Link is up at 100 Mbps, full duplex [ 280.321081] tg3 0000:03:00.0 enp3s0f0: Flow control is on for TX and on for RX [ 280.321082] tg3 0000:03:00.0 enp3s0f0: EEE is disabled [ 281.188463] tg3 0000:03:00.0 enp3s0f0: Link is down [ 282.818016] tg3 0000:03:00.0 enp3s0f0: Link is up at 100 Mbps, full duplex [ 282.818058] tg3 0000:03:00.0 enp3s0f0: Flow control is on for TX and on for RX [ 282.818075] tg3 0000:03:00.0 enp3s0f0: EEE is disabled [ 283.678965] tg3 0000:03:00.0 enp3s0f0: Link is down [ 285.314989] tg3 0000:03:00.0 enp3s0f0: Link is up at 100 Mbps, full duplex [ 285.315006] tg3 0000:03:00.0 enp3s0f0: Flow control is on for TX and on for RX [ 285.315011] tg3 0000:03:00.0 enp3s0f0: EEE is disabled [ 286.169429] tg3 0000:03:00.0 enp3s0f0: Link is down [ 287.806846] tg3 0000:03:00.0 enp3s0f0: Link is up at 100 Mbps, full duplex [ 287.806886] tg3 0000:03:00.0 enp3s0f0: Flow control is on for TX and on for RX [ 287.806894] tg3 0000:03:00.0 enp3s0f0: EEE is disabled [ 288.660034] tg3 0000:03:00.0 enp3s0f0: Link is down [ 290.283927] tg3 0000:03:00.0 enp3s0f0: Link is up at 100 Mbps, full duplex [ 290.283959] tg3 0000:03:00.0 enp3s0f0: Flow control is on for TX and on for RX [ 290.283963] tg3 0000:03:00.0 enp3s0f0: EEE is disabled [ 291.150625] tg3 0000:03:00.0 enp3s0f0: Link is down [ 292.781058] tg3 0000:03:00.0 enp3s0f0: Link is up at 100 Mbps, full duplex [ 292.781101] tg3 0000:03:00.0 enp3s0f0: Flow control is on for TX and on for RX [ 292.781109] tg3 0000:03:00.0 enp3s0f0: EEE is disabled [ 293.640856] tg3 0000:03:00.0 enp3s0f0: Link is down [ 295.272699] tg3 0000:03:00.0 enp3s0f0: Link is up at 100 Mbps, full duplex [ 295.272728] tg3 0000:03:00.0 enp3s0f0: Flow control is on for TX and on for RX [ 295.272745] tg3 0000:03:00.0 enp3s0f0: EEE is disabled [ 296.130895] tg3 0000:03:00.0 enp3s0f0: Link is down [ 297.769558] tg3 0000:03:00.0 enp3s0f0: Link is up at 100 Mbps, full duplex [ 297.769591] tg3 0000:03:00.0 enp3s0f0: Flow control is on for TX and on for RX [ 297.769597] tg3 0000:03:00.0 enp3s0f0: EEE is disabled [ 298.621412] tg3 0000:03:00.0 enp3s0f0: Link is down [ 300.246813] tg3 0000:03:00.0 enp3s0f0: Link is up at 100 Mbps, full duplex [ 300.246851] tg3 0000:03:00.0 enp3s0f0: Flow control is on for TX and on for RX [ 300.246856] tg3 0000:03:00.0 enp3s0f0: EEE is disabled [ 301.112226] tg3 0000:03:00.0 enp3s0f0: Link is down [ 302.738560] tg3 0000:03:00.0 enp3s0f0: Link is up at 100 Mbps, full duplex [ 302.738590] tg3 0000:03:00.0 enp3s0f0: Flow control is on for TX and on for RX [ 302.738596] tg3 0000:03:00.0 enp3s0f0: EEE is disabled [ 303.602031] tg3 0000:03:00.0 enp3s0f0: Link is down [ 305.254997] tg3 0000:03:00.0 enp3s0f0: Link is up at 100 Mbps, full duplex [ 305.255004] tg3 0000:03:00.0 enp3s0f0: Flow control is on for TX and on for RX [ 305.255008] tg3 0000:03:00.0 enp3s0f0: EEE is disabled [ 306.093499] tg3 0000:03:00.0 enp3s0f0: Link is down [ 307.716106] tg3 0000:03:00.0 enp3s0f0: Link is up at 100 Mbps, full duplex [ 307.716131] tg3 0000:03:00.0 enp3s0f0: Flow control is on for TX and on for RX [ 307.716137] tg3 0000:03:00.0 enp3s0f0: EEE is disabled [ 308.582949] tg3 0000:03:00.0 enp3s0f0: Link is down [ 310.209599] tg3 0000:03:00.0 enp3s0f0: Link is up at 100 Mbps, full duplex [ 310.209632] tg3 0000:03:00.0 enp3s0f0: Flow control is on for TX and on for RX [ 310.209648] tg3 0000:03:00.0 enp3s0f0: EEE is disabled [ 311.074298] tg3 0000:03:00.0 enp3s0f0: Link is down [ 312.701229] tg3 0000:03:00.0 enp3s0f0: Link is up at 100 Mbps, full duplex [ 312.701266] tg3 0000:03:00.0 enp3s0f0: Flow control is on for TX and on for RX [ 312.701293] tg3 0000:03:00.0 enp3s0f0: EEE is disabled [ 313.563766] tg3 0000:03:00.0 enp3s0f0: Link is down [ 315.198127] tg3 0000:03:00.0 enp3s0f0: Link is up at 100 Mbps, full duplex [ 315.198163] tg3 0000:03:00.0 enp3s0f0: Flow control is on for TX and on for RX [ 315.198183] tg3 0000:03:00.0 enp3s0f0: EEE is disabled [ 316.054564] tg3 0000:03:00.0 enp3s0f0: Link is down [ 317.677733] tg3 0000:03:00.0 enp3s0f0: Link is up at 100 Mbps, full duplex [ 317.677769] tg3 0000:03:00.0 enp3s0f0: Flow control is on for TX and on for RX [ 317.677775] tg3 0000:03:00.0 enp3s0f0: EEE is disabled [ 318.544736] tg3 0000:03:00.0 enp3s0f0: Link is down [ 320.835578] tg3 0000:03:00.0 enp3s0f0: Link is up at 100 Mbps, full duplex [ 320.835618] tg3 0000:03:00.0 enp3s0f0: Flow control is on for TX and on for RX [ 320.835626] tg3 0000:03:00.0 enp3s0f0: EEE is disabled [ 320.919667] tg3 0000:03:00.0 enp3s0f0: Link is down [ 339.103485] tg3 0000:03:00.0 enp3s0f0: Link is up at 100 Mbps, full duplex [ 339.103520] tg3 0000:03:00.0 enp3s0f0: Flow control is on for TX and on for RX [ 339.103525] tg3 0000:03:00.0 enp3s0f0: EEE is disabled [ 469.802697] kauditd_printk_skb: 40 callbacks suppressed [ 469.802699] audit: type=1400 audit(1584056918.894:52): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=4150 comm="apparmor_parser" [ 469.829871] audit: type=1400 audit(1584056918.922:53): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=4150 comm="apparmor_parser" [ 571.197269] wl: loading out-of-tree module taints kernel. [ 571.197275] wl: module license 'MIXED/Proprietary' taints kernel. [ 571.197276] Disabling lock debugging due to kernel taint [ 571.201158] wl: module verification failed: signature and/or required key missing - tainting kernel [ 571.574444] general protection fault: 0000 [#1] SMP PTI [ 571.574449] CPU: 0 PID: 6193 Comm: rmmod Tainted: P OE 5.3.0-40-generic #32-Ubuntu [ 571.574450] Hardware name: Gateway NV47H/NV47H, BIOS V2.09 08/11/2011 [ 571.574455] RIP: 0010:kfree+0x55/0x220 [ 571.574457] Code: 80 49 01 dc 0f 82 d2 01 00 00 48 c7 c0 00 00 00 80 48 2b 05 a5 b7 17 01 49 01 c4 49 c1 ec 0c 49 c1 e4 06 4c 03 25 83 b7 17 01 <49> 8b 44 24 08 48 8d 50 ff a8 01 4c 0f 45 e2 49 8b 54 24 08 48 8d [ 571.574459] RSP: 0018:ffffa71902cafdd8 EFLAGS: 00010203 [ 571.574460] RAX: 0000646c80000000 RBX: 14be04e5718ce42b RCX: 00000000820001d4 [ 571.574461] RDX: 00000000820001d5 RSI: 0000000000000001 RDI: 14be04e5718ce42b [ 571.574462] RBP: ffffa71902cafdf8 R08: 0000000000000000 R09: ffffffff9be37c00 [ 571.574463] R10: ffff9b9413930cd8 R11: 0000000000000001 R12: 0052d6b0c9c63380 [ 571.574464] R13: ffffffffc0a9f58d R14: 0000000000000000 R15: 0000000000000000 [ 571.574465] FS: 00007fc3a712c240(0000) GS:ffff9b941ba00000(0000) knlGS:0000000000000000 [ 571.574466] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 571.574467] CR2: 00007fc2a8000010 CR3: 000000004119a005 CR4: 00000000000606f0 [ 571.574469] Call Trace: [ 571.574479] b43_bcma_remove+0x6d/0xa0 [b43] [ 571.574484] bcma_device_remove+0x24/0x40 [bcma] [ 571.574487] device_release_driver_internal+0xe4/0x1c0 [ 571.574489] driver_detach+0x49/0x86 [ 571.574491] bus_remove_driver+0x59/0xca [ 571.574493] driver_unregister+0x2e/0x50 [ 571.574495] bcma_driver_unregister+0x12/0x20 [bcma] [ 571.574501] b43_exit+0x1c/0x32c [b43] [ 571.574503] __x64_sys_delete_module+0x147/0x290 [ 571.574506] ? exit_to_usermode_loop+0xea/0x160 [ 571.574508] do_syscall_64+0x5a/0x130 [ 571.574511] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 571.574513] RIP: 0033:0x7fc3a7278c8b [ 571.574515] Code: 73 01 c3 48 8b 0d 05 72 0c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d d5 71 0c 00 f7 d8 64 89 01 48 [ 571.574516] RSP: 002b:00007fffa75aecf8 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 [ 571.574517] RAX: ffffffffffffffda RBX: 000055e79a6d7780 RCX: 00007fc3a7278c8b [ 571.574518] RDX: 000000000000000a RSI: 0000000000000800 RDI: 000055e79a6d77e8 [ 571.574519] RBP: 0000000000000000 R08: 1999999999999999 R09: 0000000000000000 [ 571.574520] R10: 00007fc3a72f4ac0 R11: 0000000000000206 R12: 00007fffa75aef20 [ 571.574521] R13: 00007fffa75afd8b R14: 000055e79a6d72a0 R15: 000055e79a6d7780 [ 571.574522] Modules linked in: wl(POE) nls_iso8859_1 snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio snd_hda_intel intel_rapl_msr intel_rapl_common snd_hda_codec x86_pkg_temp_thermal b43(-) snd_hda_core intel_powerclamp cordic mac80211 snd_hwdep snd_pcm snd_seq_midi snd_seq_midi_event coretemp cfg80211 snd_rawmidi snd_seq ssb snd_seq_device libarc4 snd_timer snd i915 kvm_intel kvm soundcore irqbypass mei_hdcp drm_kms_helper drm crct10dif_pclmul crc32_pclmul ghash_clmulni_intel i2c_algo_bit mei_me aesni_intel mei fb_sys_fops syscopyarea sysfillrect sysimgblt aes_x86_64 crypto_simd input_leds joydev serio_raw cryptd acer_wmi glue_helper sparse_keymap wmi_bmof mac_hid intel_cstate intel_rapl_perf sch_fq_codel parport_pc ppdev lp parport ip_tables x_tables autofs4 hid_generic usbhid hid psmouse ahci i2c_i801 libahci sdhci_pci cqhci tg3 lpc_ich sdhci bcma wmi video [ 571.574549] ---[ end trace 175a86e911364e95 ]--- [ 571.574551] RIP: 0010:kfree+0x55/0x220 [ 571.574553] Code: 80 49 01 dc 0f 82 d2 01 00 00 48 c7 c0 00 00 00 80 48 2b 05 a5 b7 17 01 49 01 c4 49 c1 ec 0c 49 c1 e4 06 4c 03 25 83 b7 17 01 <49> 8b 44 24 08 48 8d 50 ff a8 01 4c 0f 45 e2 49 8b 54 24 08 48 8d [ 571.574554] RSP: 0018:ffffa71902cafdd8 EFLAGS: 00010203 [ 571.574555] RAX: 0000646c80000000 RBX: 14be04e5718ce42b RCX: 00000000820001d4 [ 571.574556] RDX: 00000000820001d5 RSI: 0000000000000001 RDI: 14be04e5718ce42b [ 571.574557] RBP: ffffa71902cafdf8 R08: 0000000000000000 R09: ffffffff9be37c00 [ 571.574558] R10: ffff9b9413930cd8 R11: 0000000000000001 R12: 0052d6b0c9c63380 [ 571.574558] R13: ffffffffc0a9f58d R14: 0000000000000000 R15: 0000000000000000 [ 571.574560] FS: 00007fc3a712c240(0000) GS:ffff9b941ba00000(0000) knlGS:0000000000000000 [ 571.574561] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 571.574561] CR2: 00007fc2a8000010 CR3: 000000004119a005 CR4: 00000000000606f0