[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.2.0-31-generic (buildd@allspice) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #50-Ubuntu SMP Fri Sep 7 16:16:45 UTC 2012 (Ubuntu 3.2.0-31.50-generic 3.2.28) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-31-generic root=UUID=e23f4d25-7f77-4fe5-ac71-289727630813 ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000dfe72000 (usable) [ 0.000000] BIOS-e820: 00000000dfe72000 - 00000000e0000000 (reserved) [ 0.000000] BIOS-e820: 00000000f4000000 - 00000000f8000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved) [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000120000000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.4 present. [ 0.000000] DMI: Dell Inc. XPS M1530 /0D500F, BIOS A09 07/14/2008 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x120000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FC0000000 write-back [ 0.000000] 2 base 0C0000000 mask FE0000000 write-back [ 0.000000] 3 base 100000000 mask F00000000 write-back [ 0.000000] 4 base 0DFF00000 mask FFFF00000 uncachable [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] original variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB [ 0.000000] reg 2, base: 3GB, range: 512MB, type WB [ 0.000000] reg 3, base: 4GB, range: 4GB, type WB [ 0.000000] reg 4, base: 3583MB, range: 1MB, type UC [ 0.000000] total RAM covered: 7679M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 1G num_reg: 4 lose cover RAM: 0G [ 0.000000] New variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 4GB, type WB [ 0.000000] reg 1, base: 3583MB, range: 1MB, type UC [ 0.000000] reg 2, base: 3584MB, range: 512MB, type UC [ 0.000000] reg 3, base: 4GB, range: 4GB, type WB [ 0.000000] e820 update range: 00000000dff00000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xdfe72 max_arch_pfn = 0x400000000 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480 [ 0.000000] init_memory_mapping: 0000000000000000-00000000dfe72000 [ 0.000000] 0000000000 - 00dfe00000 page 2M [ 0.000000] 00dfe00000 - 00dfe72000 page 4k [ 0.000000] kernel direct mapping tables up to dfe72000 @ 1fffa000-20000000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000120000000 [ 0.000000] 0100000000 - 0120000000 page 2M [ 0.000000] kernel direct mapping tables up to 120000000 @ dfe6c000-dfe72000 [ 0.000000] RAMDISK: 364d4000 - 37262000 [ 0.000000] ACPI: RSDP 00000000000fbc80 00024 (v02 DELL ) [ 0.000000] ACPI: XSDT 00000000dfe73a00 00064 (v01 DELL M08 27D8070E ASL 00000061) [ 0.000000] ACPI: FACP 00000000dfe7389c 000F4 (v04 DELL M08 27D8070E ASL 00000061) [ 0.000000] ACPI: DSDT 00000000dfe74000 04BC2 (v02 INT430 SYSFexxx 00001001 INTL 20050624) [ 0.000000] ACPI: FACS 00000000dfe82800 00040 [ 0.000000] ACPI: HPET 00000000dfe73b00 00038 (v01 DELL M08 00000001 ASL 00000061) [ 0.000000] ACPI: APIC 00000000dfe73c00 00068 (v01 DELL M08 27D8070E ASL 00000047) [ 0.000000] ACPI: MCFG 00000000dfe73bc0 0003E (v16 DELL M08 27D8070E ASL 00000061) [ 0.000000] ACPI: SLIC 00000000dfe73c9c 00176 (v01 DELL M08 27D8070E ASL 00000061) [ 0.000000] ACPI: OSFR 00000000dfe73200 0002C (v01 DELL M08 27D8070E ASL 00000061) [ 0.000000] ACPI: BOOT 00000000dfe737c0 00028 (v01 DELL M08 27D8070E ASL 00000061) [ 0.000000] ACPI: SSDT 00000000dfe721c0 004CC (v01 PmRef CpuPm 00003000 INTL 20050624) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000120000000 [ 0.000000] Initmem setup node 0 0000000000000000-0000000120000000 [ 0.000000] NODE_DATA [000000011fffb000 - 000000011fffffff] [ 0.000000] [ffffea0000000000-ffffea00047fffff] PMD -> [ffff88011b600000-ffff88011f5fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00120000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000dfe72 [ 0.000000] 0: 0x00100000 -> 0x00120000 [ 0.000000] On node 0 totalpages: 1048065 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 5 pages reserved [ 0.000000] DMA zone: 3914 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 16320 pages used for memmap [ 0.000000] DMA32 zone: 896690 pages, LIFO batch:31 [ 0.000000] Normal zone: 2048 pages used for memmap [ 0.000000] Normal zone: 129024 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000dfe72000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f4000000 [ 0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000f8000000 [ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000 [ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fed18000 [ 0.000000] PM: Registered nosave memory: 00000000fed18000 - 00000000fed1c000 [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000 [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fed90000 [ 0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000feda0000 [ 0.000000] PM: Registered nosave memory: 00000000feda0000 - 00000000feda6000 [ 0.000000] PM: Registered nosave memory: 00000000feda6000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee10000 [ 0.000000] PM: Registered nosave memory: 00000000fee10000 - 00000000ffe00000 [ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at e0000000 (gap: e0000000:14000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88011fc00000 s83136 r8192 d23360 u1048576 [ 0.000000] pcpu-alloc: s83136 r8192 d23360 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1029628 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-31-generic root=UUID=e23f4d25-7f77-4fe5-ac71-289727630813 ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 4030732k/4718592k available (6558k kernel code, 526332k absent, 161528k reserved, 6642k data, 920k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:16640 nr_irqs:512 16 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 33554432 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2094.157 MHz processor. [ 0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4188.31 BogoMIPS (lpj=8376628) [ 0.004010] pid_max: default: 32768 minimum: 301 [ 0.004039] Security Framework initialized [ 0.004060] AppArmor: AppArmor initialized [ 0.004062] Yama: becoming mindful. [ 0.008232] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.010609] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.011760] Mount-cache hash table entries: 256 [ 0.011935] Initializing cgroup subsys cpuacct [ 0.011942] Initializing cgroup subsys memory [ 0.011953] Initializing cgroup subsys devices [ 0.011956] Initializing cgroup subsys freezer [ 0.011958] Initializing cgroup subsys blkio [ 0.011966] Initializing cgroup subsys perf_event [ 0.012031] CPU: Physical Processor ID: 0 [ 0.012033] CPU: Processor Core ID: 0 [ 0.012036] mce: CPU supports 6 MCE banks [ 0.012046] CPU0: Thermal monitoring enabled (TM2) [ 0.012050] using mwait in idle threads. [ 0.014965] ACPI: Core revision 20110623 [ 0.020014] ftrace: allocating 27008 entries in 106 pages [ 0.024521] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.065851] CPU0: Intel(R) Core(TM)2 Duo CPU T8100 @ 2.10GHz stepping 06 [ 0.068003] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver. [ 0.068003] ... version: 2 [ 0.068003] ... bit width: 40 [ 0.068003] ... generic registers: 2 [ 0.068003] ... value mask: 000000ffffffffff [ 0.068003] ... max period: 000000007fffffff [ 0.068003] ... fixed-purpose events: 3 [ 0.068003] ... event mask: 0000000700000003 [ 0.068003] NMI watchdog enabled, takes one hw-pmu counter. [ 0.068003] Booting Node 0, Processors #1 Ok. [ 0.068003] smpboot cpu 1: start_ip = 9a000 [ 0.156041] NMI watchdog enabled, takes one hw-pmu counter. [ 0.156086] Brought up 2 CPUs [ 0.156089] Total of 2 processors activated (8376.75 BogoMIPS). [ 0.158195] devtmpfs: initialized [ 0.158195] EVM: security.selinux [ 0.158195] EVM: security.SMACK64 [ 0.158195] EVM: security.capability [ 0.160309] print_constraints: dummy: [ 0.160348] RTC time: 23:18:53, date: 09/30/12 [ 0.160384] NET: Registered protocol family 16 [ 0.160473] Trying to unpack rootfs image as initramfs... [ 0.160535] ACPI: bus type pci registered [ 0.160612] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf4000000-0xf7ffffff] (base 0xf4000000) [ 0.160615] PCI: MMCONFIG at [mem 0xf4000000-0xf7ffffff] reserved in E820 [ 0.168822] PCI: Using configuration type 1 for base access [ 0.168830] dmi type 0xB1 record - unknown flag [ 0.176250] bio: create slab at 0 [ 0.176250] ACPI: Added _OSI(Module Device) [ 0.176250] ACPI: Added _OSI(Processor Device) [ 0.176250] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.176250] ACPI: Added _OSI(Processor Aggregator Device) [ 0.177190] ACPI: EC: Look up EC in DSDT [ 0.181564] ACPI: SSDT 00000000dfe72cf6 00286 (v01 PmRef Cpu0Ist 00003000 INTL 20050624) [ 0.181800] ACPI: Dynamic OEM Table Load: [ 0.181804] ACPI: SSDT (null) 00286 (v01 PmRef Cpu0Ist 00003000 INTL 20050624) [ 0.181912] ACPI: SSDT 00000000dfe7268c 005E5 (v01 PmRef Cpu0Cst 00003001 INTL 20050624) [ 0.182133] ACPI: Dynamic OEM Table Load: [ 0.182136] ACPI: SSDT (null) 005E5 (v01 PmRef Cpu0Cst 00003001 INTL 20050624) [ 0.182324] ACPI: SSDT 00000000dfe72f7c 000C4 (v01 PmRef Cpu1Ist 00003000 INTL 20050624) [ 0.182551] ACPI: Dynamic OEM Table Load: [ 0.182555] ACPI: SSDT (null) 000C4 (v01 PmRef Cpu1Ist 00003000 INTL 20050624) [ 0.182629] ACPI: SSDT 00000000dfe72c71 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624) [ 0.182852] ACPI: Dynamic OEM Table Load: [ 0.182855] ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624) [ 0.183013] ACPI: Interpreter enabled [ 0.183017] ACPI: (supports S0 S3 S4 S5) [ 0.183034] ACPI: Using IOAPIC for interrupt routing [ 0.214464] ACPI: No dock devices found. [ 0.214468] HEST: Table not found. [ 0.214472] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.222700] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.239106] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] [ 0.239110] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] [ 0.239113] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.239115] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] [ 0.239118] pci_root PNP0A03:00: host bridge window [mem 0xe0000000-0xf3ffffff] [ 0.239121] pci_root PNP0A03:00: host bridge window [mem 0xf8000000-0xfebfffff] [ 0.239123] pci_root PNP0A03:00: host bridge window [mem 0xfec10000-0xfecfffff] [ 0.239126] pci_root PNP0A03:00: host bridge window [mem 0xfed1c000-0xfed1ffff] [ 0.239128] pci_root PNP0A03:00: host bridge window [mem 0xfed90000-0xfed9ffff] [ 0.239131] pci_root PNP0A03:00: host bridge window [mem 0xfeda7000-0xfedfffff] [ 0.239133] pci_root PNP0A03:00: host bridge window [mem 0xfee10000-0xff9fffff] [ 0.239136] pci_root PNP0A03:00: host bridge window [mem 0xffc00000-0xffdfffff] [ 0.239138] pci_root PNP0A03:00: host bridge window [mem 0x120000000-0x317ffffff] [ 0.239157] pci 0000:00:00.0: [8086:2a00] type 0 class 0x000600 [ 0.239209] pci 0000:00:01.0: [8086:2a01] type 1 class 0x000604 [ 0.239258] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.239261] pci 0000:00:01.0: PME# disabled [ 0.239317] pci 0000:00:1a.0: [8086:2834] type 0 class 0x000c03 [ 0.239377] pci 0000:00:1a.0: reg 20: [io 0x6f20-0x6f3f] [ 0.239423] pci 0000:00:1a.1: [8086:2835] type 0 class 0x000c03 [ 0.239481] pci 0000:00:1a.1: reg 20: [io 0x6f00-0x6f1f] [ 0.239544] pci 0000:00:1a.7: [8086:283a] type 0 class 0x000c03 [ 0.239571] pci 0000:00:1a.7: reg 10: [mem 0xfed1c400-0xfed1c7ff] [ 0.239682] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.239688] pci 0000:00:1a.7: PME# disabled [ 0.239720] pci 0000:00:1b.0: [8086:284b] type 0 class 0x000403 [ 0.239743] pci 0000:00:1b.0: reg 10: [mem 0xfebfc000-0xfebfffff 64bit] [ 0.239851] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.239857] pci 0000:00:1b.0: PME# disabled [ 0.239888] pci 0000:00:1c.0: [8086:283f] type 1 class 0x000604 [ 0.240005] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.240020] pci 0000:00:1c.0: PME# disabled [ 0.240055] pci 0000:00:1c.1: [8086:2841] type 1 class 0x000604 [ 0.240169] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.240174] pci 0000:00:1c.1: PME# disabled [ 0.240211] pci 0000:00:1c.4: [8086:2847] type 1 class 0x000604 [ 0.240327] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.240332] pci 0000:00:1c.4: PME# disabled [ 0.240365] pci 0000:00:1d.0: [8086:2830] type 0 class 0x000c03 [ 0.240423] pci 0000:00:1d.0: reg 20: [io 0x6f80-0x6f9f] [ 0.240468] pci 0000:00:1d.1: [8086:2831] type 0 class 0x000c03 [ 0.240526] pci 0000:00:1d.1: reg 20: [io 0x6f60-0x6f7f] [ 0.240571] pci 0000:00:1d.2: [8086:2832] type 0 class 0x000c03 [ 0.240629] pci 0000:00:1d.2: reg 20: [io 0x6f40-0x6f5f] [ 0.240692] pci 0000:00:1d.7: [8086:2836] type 0 class 0x000c03 [ 0.240717] pci 0000:00:1d.7: reg 10: [mem 0xfed1c000-0xfed1c3ff] [ 0.240827] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.240833] pci 0000:00:1d.7: PME# disabled [ 0.240858] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604 [ 0.240959] pci 0000:00:1f.0: [8086:2815] type 0 class 0x000601 [ 0.241076] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO [ 0.241083] pci 0000:00:1f.0: quirk: [io 0x1080-0x10bf] claimed by ICH6 GPIO [ 0.241088] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0900 (mask 007f) [ 0.241093] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 006c (mask 0007) [ 0.241098] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0c80 (mask 003f) [ 0.241158] pci 0000:00:1f.1: [8086:2850] type 0 class 0x000101 [ 0.241175] pci 0000:00:1f.1: reg 10: [io 0x01f0-0x01f7] [ 0.241188] pci 0000:00:1f.1: reg 14: [io 0x03f4-0x03f7] [ 0.241201] pci 0000:00:1f.1: reg 18: [io 0x0170-0x0177] [ 0.241214] pci 0000:00:1f.1: reg 1c: [io 0x0374-0x0377] [ 0.241226] pci 0000:00:1f.1: reg 20: [io 0x6fa0-0x6faf] [ 0.241277] pci 0000:00:1f.2: [8086:2828] type 0 class 0x000101 [ 0.241299] pci 0000:00:1f.2: reg 10: [io 0x6eb0-0x6eb7] [ 0.241312] pci 0000:00:1f.2: reg 14: [io 0x6eb8-0x6ebb] [ 0.241325] pci 0000:00:1f.2: reg 18: [io 0x6ec0-0x6ec7] [ 0.241338] pci 0000:00:1f.2: reg 1c: [io 0x6ec8-0x6ecb] [ 0.241350] pci 0000:00:1f.2: reg 20: [io 0x6ee0-0x6eef] [ 0.241363] pci 0000:00:1f.2: reg 24: [io 0xeff0-0xefff] [ 0.241412] pci 0000:00:1f.2: PME# supported from D3hot [ 0.241417] pci 0000:00:1f.2: PME# disabled [ 0.241434] pci 0000:00:1f.3: [8086:283e] type 0 class 0x000c05 [ 0.241451] pci 0000:00:1f.3: reg 10: [mem 0xfebfbf00-0xfebfbfff] [ 0.241495] pci 0000:00:1f.3: reg 20: [io 0x10c0-0x10df] [ 0.241588] pci 0000:01:00.0: [10de:0427] type 0 class 0x000300 [ 0.241608] pci 0000:01:00.0: reg 10: [mem 0xfd000000-0xfdffffff] [ 0.241630] pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.241652] pci 0000:01:00.0: reg 1c: [mem 0xfa000000-0xfbffffff 64bit] [ 0.241666] pci 0000:01:00.0: reg 24: [io 0xdf00-0xdf7f] [ 0.241681] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.241791] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.241795] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff] [ 0.241798] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfeafffff] [ 0.241803] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] [ 0.241896] pci 0000:09:00.0: [11ab:4354] type 0 class 0x000200 [ 0.241931] pci 0000:09:00.0: reg 10: [mem 0xf9ffc000-0xf9ffffff 64bit] [ 0.241950] pci 0000:09:00.0: reg 18: [io 0xce00-0xceff] [ 0.242106] pci 0000:09:00.0: supports D1 D2 [ 0.242108] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.242115] pci 0000:09:00.0: PME# disabled [ 0.248043] pci 0000:00:1c.0: PCI bridge to [bus 09-09] [ 0.248049] pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff] [ 0.248055] pci 0000:00:1c.0: bridge window [mem 0xf9f00000-0xf9ffffff] [ 0.248231] pci 0000:0b:00.0: [14e4:4315] type 0 class 0x000280 [ 0.248303] pci 0000:0b:00.0: reg 10: [mem 0xf9efc000-0xf9efffff 64bit] [ 0.248693] pci 0000:0b:00.0: supports D1 D2 [ 0.248695] pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold [ 0.248707] pci 0000:0b:00.0: PME# disabled [ 0.248887] pci 0000:00:1c.1: PCI bridge to [bus 0b-0b] [ 0.248895] pci 0000:00:1c.1: bridge window [mem 0xf9e00000-0xf9efffff] [ 0.248964] pci 0000:00:1c.4: PCI bridge to [bus 0c-0d] [ 0.248969] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.248974] pci 0000:00:1c.4: bridge window [mem 0xf9c00000-0xf9dfffff] [ 0.248983] pci 0000:00:1c.4: bridge window [mem 0xf0000000-0xf01fffff 64bit pref] [ 0.249048] pci 0000:03:09.0: [1180:0832] type 0 class 0x000c00 [ 0.249073] pci 0000:03:09.0: reg 10: [mem 0xf9bff800-0xf9bfffff] [ 0.249178] pci 0000:03:09.0: supports D1 D2 [ 0.249181] pci 0000:03:09.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.249186] pci 0000:03:09.0: PME# disabled [ 0.249209] pci 0000:03:09.1: [1180:0822] type 0 class 0x000805 [ 0.249232] pci 0000:03:09.1: reg 10: [mem 0xf9bff500-0xf9bff5ff] [ 0.249336] pci 0000:03:09.1: supports D1 D2 [ 0.249338] pci 0000:03:09.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.249344] pci 0000:03:09.1: PME# disabled [ 0.249366] pci 0000:03:09.2: [1180:0592] type 0 class 0x000880 [ 0.249390] pci 0000:03:09.2: reg 10: [mem 0xf9bff600-0xf9bff6ff] [ 0.249494] pci 0000:03:09.2: supports D1 D2 [ 0.249496] pci 0000:03:09.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.249501] pci 0000:03:09.2: PME# disabled [ 0.249524] pci 0000:03:09.3: [1180:0852] type 0 class 0x000880 [ 0.249547] pci 0000:03:09.3: reg 10: [mem 0xf9bff700-0xf9bff7ff] [ 0.249650] pci 0000:03:09.3: supports D1 D2 [ 0.249652] pci 0000:03:09.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.249658] pci 0000:03:09.3: PME# disabled [ 0.249716] pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode) [ 0.249725] pci 0000:00:1e.0: bridge window [mem 0xf9b00000-0xf9bfffff] [ 0.249734] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.249736] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.249739] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.249742] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode) [ 0.249748] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xf3ffffff] (subtractive decode) [ 0.249750] pci 0000:00:1e.0: bridge window [mem 0xf8000000-0xfebfffff] (subtractive decode) [ 0.249753] pci 0000:00:1e.0: bridge window [mem 0xfec10000-0xfecfffff] (subtractive decode) [ 0.249756] pci 0000:00:1e.0: bridge window [mem 0xfed1c000-0xfed1ffff] (subtractive decode) [ 0.249759] pci 0000:00:1e.0: bridge window [mem 0xfed90000-0xfed9ffff] (subtractive decode) [ 0.249761] pci 0000:00:1e.0: bridge window [mem 0xfeda7000-0xfedfffff] (subtractive decode) [ 0.249764] pci 0000:00:1e.0: bridge window [mem 0xfee10000-0xff9fffff] (subtractive decode) [ 0.249767] pci 0000:00:1e.0: bridge window [mem 0xffc00000-0xffdfffff] (subtractive decode) [ 0.249770] pci 0000:00:1e.0: bridge window [mem 0x120000000-0x317ffffff] (subtractive decode) [ 0.249809] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.250027] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] [ 0.250119] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 0.250154] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.250198] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 0.250243] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT] [ 0.250285] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.250289] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d [ 0.250291] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.258112] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 11) *7 [ 0.258181] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10 [ 0.258246] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *5 [ 0.258302] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 11) *0, disabled. [ 0.258368] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.258435] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.258503] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 0.258562] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.258720] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.258725] vgaarb: loaded [ 0.258727] vgaarb: bridge control possible 0000:01:00.0 [ 0.258846] i2c-core: driver [aat2870] using legacy suspend method [ 0.258848] i2c-core: driver [aat2870] using legacy resume method [ 0.258922] SCSI subsystem initialized [ 0.258991] libata version 3.00 loaded. [ 0.259049] usbcore: registered new interface driver usbfs [ 0.259062] usbcore: registered new interface driver hub [ 0.259094] usbcore: registered new device driver usb [ 0.259198] PCI: Using ACPI for IRQ routing [ 0.261820] PCI: pci_cache_line_size set to 64 bytes [ 0.262022] reserve RAM buffer: 000000000009f000 - 000000000009ffff [ 0.262024] reserve RAM buffer: 00000000dfe72000 - 00000000dfffffff [ 0.262142] NetLabel: Initializing [ 0.262144] NetLabel: domain hash size = 128 [ 0.262145] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.262161] NetLabel: unlabeled traffic allowed by default [ 0.262212] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.262218] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.262223] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.272090] Switching to clocksource hpet [ 0.280894] AppArmor: AppArmor Filesystem Enabled [ 0.280933] pnp: PnP ACPI init [ 0.280956] ACPI: bus type pnp registered [ 0.289294] pnp 00:00: [bus 00-ff] [ 0.289298] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.289301] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.289303] pnp 00:00: [io 0x0d00-0xffff window] [ 0.289306] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.289308] pnp 00:00: [mem 0x000d0000-0x000dffff window] [ 0.289310] pnp 00:00: [mem 0xe0000000-0xf3ffffff window] [ 0.289313] pnp 00:00: [mem 0xf8000000-0xfebfffff window] [ 0.289315] pnp 00:00: [mem 0xfec10000-0xfecfffff window] [ 0.289317] pnp 00:00: [mem 0xfed1c000-0xfed1ffff window] [ 0.289319] pnp 00:00: [mem 0xfed90000-0xfed9ffff window] [ 0.289322] pnp 00:00: [mem 0xfeda7000-0xfedfffff window] [ 0.289324] pnp 00:00: [mem 0xfee10000-0xff9fffff window] [ 0.289326] pnp 00:00: [mem 0xffc00000-0xffdfffff window] [ 0.289328] pnp 00:00: [mem 0x120000000-0x317ffffff window] [ 0.289416] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.289430] pnp 00:01: [io 0x004e-0x004f] [ 0.289432] pnp 00:01: [io 0x0068-0x006f] [ 0.289434] pnp 00:01: [mem 0xff800000-0xff8fffff] [ 0.289436] pnp 00:01: [mem 0xffc00000-0xffcfffff] [ 0.289511] system 00:01: [mem 0xff800000-0xff8fffff] has been reserved [ 0.289514] system 00:01: [mem 0xffc00000-0xffcfffff] has been reserved [ 0.289518] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.289546] pnp 00:02: [irq 12] [ 0.289573] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.289589] pnp 00:03: [io 0x0060] [ 0.289591] pnp 00:03: [io 0x0064] [ 0.289593] pnp 00:03: [io 0x0062] [ 0.289595] pnp 00:03: [io 0x0066] [ 0.289601] pnp 00:03: [irq 1] [ 0.289625] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.289641] pnp 00:04: [io 0x0070-0x0071] [ 0.289647] pnp 00:04: [irq 8] [ 0.289649] pnp 00:04: [io 0x0072-0x0077] [ 0.289677] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.289693] pnp 00:05: [io 0x0061] [ 0.289695] pnp 00:05: [io 0x0063] [ 0.289697] pnp 00:05: [io 0x0065] [ 0.289699] pnp 00:05: [io 0x0067] [ 0.289727] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.289742] pnp 00:06: [io 0x0c80-0x0cff] [ 0.289788] system 00:06: [io 0x0c80-0x0cff] could not be reserved [ 0.289792] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.289810] pnp 00:07: [dma 4] [ 0.289812] pnp 00:07: [io 0x0000-0x000f] [ 0.289817] pnp 00:07: [io 0x0080-0x0085] [ 0.289819] pnp 00:07: [io 0x0087-0x008f] [ 0.289821] pnp 00:07: [io 0x00c0-0x00df] [ 0.289823] pnp 00:07: [io 0x0010-0x001f] [ 0.289825] pnp 00:07: [io 0x0090-0x0091] [ 0.289827] pnp 00:07: [io 0x0093-0x009f] [ 0.289853] pnp 00:07: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.289868] pnp 00:08: [io 0x00f0-0x00ff] [ 0.289874] pnp 00:08: [irq 13] [ 0.289904] pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.289940] pnp 00:09: [mem 0xfed00000-0xfed003ff] [ 0.289994] system 00:09: [mem 0xfed00000-0xfed003ff] has been reserved [ 0.289997] system 00:09: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) [ 0.290114] pnp 00:0a: [io 0x0900-0x097f] [ 0.290116] pnp 00:0a: [io 0x0092] [ 0.290118] pnp 00:0a: [io 0x00b2-0x00b3] [ 0.290120] pnp 00:0a: [io 0x0020-0x0021] [ 0.290122] pnp 00:0a: [io 0x00a0-0x00a1] [ 0.290125] pnp 00:0a: [irq 0 disabled] [ 0.290127] pnp 00:0a: [io 0x04d0-0x04d1] [ 0.290129] pnp 00:0a: [io 0x1000-0x1005] [ 0.290131] pnp 00:0a: [io 0x1008-0x100f] [ 0.290146] pnp 00:0a: disabling [io 0x1000-0x1005] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] [ 0.290149] pnp 00:0a: disabling [io 0x1008-0x100f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] [ 0.290203] system 00:0a: [io 0x0900-0x097f] has been reserved [ 0.290206] system 00:0a: [io 0x04d0-0x04d1] has been reserved [ 0.290210] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.290229] pnp 00:0b: [io 0xf400-0xf4fe] [ 0.290231] pnp 00:0b: [io 0x0086] [ 0.290233] pnp 00:0b: [io 0x1006-0x1007] [ 0.290235] pnp 00:0b: [io 0x100a-0x1059] [ 0.290237] pnp 00:0b: [io 0x1080-0x10bf] [ 0.290239] pnp 00:0b: [io 0x10c0-0x10df] [ 0.290241] pnp 00:0b: [io 0x1010-0x102f] [ 0.290243] pnp 00:0b: [io 0x0809] [ 0.290257] pnp 00:0b: disabling [io 0x1006-0x1007] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] [ 0.290261] pnp 00:0b: disabling [io 0x100a-0x1059] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] [ 0.290264] pnp 00:0b: disabling [io 0x1010-0x102f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] [ 0.290321] system 00:0b: [io 0xf400-0xf4fe] has been reserved [ 0.290324] system 00:0b: [io 0x1080-0x10bf] has been reserved [ 0.290327] system 00:0b: [io 0x10c0-0x10df] has been reserved [ 0.290330] system 00:0b: [io 0x0809] has been reserved [ 0.290333] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.300243] pnp 00:0c: [mem 0x00000000-0x0009efff] [ 0.300247] pnp 00:0c: [mem 0x0009f000-0x0009ffff] [ 0.300249] pnp 00:0c: [mem 0x000c0000-0x000cffff] [ 0.300251] pnp 00:0c: [mem 0x000e0000-0x000fffff] [ 0.300253] pnp 00:0c: [mem 0x00100000-0xdfe71fff] [ 0.300255] pnp 00:0c: [mem 0xdfe72000-0xdfefffff] [ 0.300257] pnp 00:0c: [mem 0xdff00000-0xdfffffff] [ 0.300259] pnp 00:0c: [mem 0xffe00000-0xffffffff] [ 0.300261] pnp 00:0c: [mem 0xffa00000-0xffbfffff] [ 0.300263] pnp 00:0c: [mem 0xfec00000-0xfec0ffff] [ 0.300265] pnp 00:0c: [mem 0xfee00000-0xfee0ffff] [ 0.300267] pnp 00:0c: [mem 0xfed20000-0xfed8ffff] [ 0.300269] pnp 00:0c: [mem 0xfeda0000-0xfeda3fff] [ 0.300271] pnp 00:0c: [mem 0xfeda4000-0xfeda4fff] [ 0.300273] pnp 00:0c: [mem 0xfeda5000-0xfeda5fff] [ 0.300275] pnp 00:0c: [mem 0xfeda6000-0xfeda6fff] [ 0.300282] pnp 00:0c: [mem 0xfed18000-0xfed1bfff] [ 0.300284] pnp 00:0c: [mem 0xf4000000-0xf7ffffff] [ 0.300395] system 00:0c: [mem 0x00000000-0x0009efff] could not be reserved [ 0.300398] system 00:0c: [mem 0x0009f000-0x0009ffff] could not be reserved [ 0.300402] system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved [ 0.300404] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.300407] system 00:0c: [mem 0x00100000-0xdfe71fff] could not be reserved [ 0.300410] system 00:0c: [mem 0xdfe72000-0xdfefffff] has been reserved [ 0.300413] system 00:0c: [mem 0xdff00000-0xdfffffff] has been reserved [ 0.300416] system 00:0c: [mem 0xffe00000-0xffffffff] has been reserved [ 0.300419] system 00:0c: [mem 0xffa00000-0xffbfffff] has been reserved [ 0.300422] system 00:0c: [mem 0xfec00000-0xfec0ffff] could not be reserved [ 0.300424] system 00:0c: [mem 0xfee00000-0xfee0ffff] has been reserved [ 0.300427] system 00:0c: [mem 0xfed20000-0xfed8ffff] has been reserved [ 0.300430] system 00:0c: [mem 0xfeda0000-0xfeda3fff] has been reserved [ 0.300433] system 00:0c: [mem 0xfeda4000-0xfeda4fff] has been reserved [ 0.300436] system 00:0c: [mem 0xfeda5000-0xfeda5fff] has been reserved [ 0.300439] system 00:0c: [mem 0xfeda6000-0xfeda6fff] has been reserved [ 0.300442] system 00:0c: [mem 0xfed18000-0xfed1bfff] has been reserved [ 0.300444] system 00:0c: [mem 0xf4000000-0xf7ffffff] has been reserved [ 0.300448] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.300503] pnp: PnP ACPI: found 13 devices [ 0.300505] ACPI: ACPI bus type pnp unregistered [ 0.307072] PCI: max bus depth: 1 pci_try_num: 2 [ 0.307136] pci 0000:00:1c.1: BAR 15: assigned [mem 0xf0200000-0xf03fffff 64bit pref] [ 0.307141] pci 0000:00:1c.1: BAR 13: assigned [io 0x2000-0x2fff] [ 0.307145] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf0400000-0xf05fffff 64bit pref] [ 0.307149] pci 0000:01:00.0: BAR 6: assigned [mem 0xfc000000-0xfc01ffff pref] [ 0.307152] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.307155] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff] [ 0.307160] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfeafffff] [ 0.307163] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] [ 0.307168] pci 0000:00:1c.0: PCI bridge to [bus 09-09] [ 0.307172] pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff] [ 0.307178] pci 0000:00:1c.0: bridge window [mem 0xf9f00000-0xf9ffffff] [ 0.307184] pci 0000:00:1c.0: bridge window [mem 0xf0400000-0xf05fffff 64bit pref] [ 0.307193] pci 0000:00:1c.1: PCI bridge to [bus 0b-0b] [ 0.307197] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff] [ 0.307203] pci 0000:00:1c.1: bridge window [mem 0xf9e00000-0xf9efffff] [ 0.307209] pci 0000:00:1c.1: bridge window [mem 0xf0200000-0xf03fffff 64bit pref] [ 0.307217] pci 0000:00:1c.4: PCI bridge to [bus 0c-0d] [ 0.307220] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.307227] pci 0000:00:1c.4: bridge window [mem 0xf9c00000-0xf9dfffff] [ 0.307232] pci 0000:00:1c.4: bridge window [mem 0xf0000000-0xf01fffff 64bit pref] [ 0.307241] pci 0000:00:1e.0: PCI bridge to [bus 03-03] [ 0.307247] pci 0000:00:1e.0: bridge window [mem 0xf9b00000-0xf9bfffff] [ 0.307279] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.307283] pci 0000:00:01.0: setting latency timer to 64 [ 0.307292] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.307297] pci 0000:00:1c.0: setting latency timer to 64 [ 0.307309] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.307315] pci 0000:00:1c.1: setting latency timer to 64 [ 0.307323] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.307328] pci 0000:00:1c.4: setting latency timer to 64 [ 0.307338] pci 0000:00:1e.0: setting latency timer to 64 [ 0.307342] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.307345] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.307347] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.307350] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff] [ 0.307352] pci_bus 0000:00: resource 8 [mem 0xe0000000-0xf3ffffff] [ 0.307355] pci_bus 0000:00: resource 9 [mem 0xf8000000-0xfebfffff] [ 0.307357] pci_bus 0000:00: resource 10 [mem 0xfec10000-0xfecfffff] [ 0.307359] pci_bus 0000:00: resource 11 [mem 0xfed1c000-0xfed1ffff] [ 0.307362] pci_bus 0000:00: resource 12 [mem 0xfed90000-0xfed9ffff] [ 0.307364] pci_bus 0000:00: resource 13 [mem 0xfeda7000-0xfedfffff] [ 0.307367] pci_bus 0000:00: resource 14 [mem 0xfee10000-0xff9fffff] [ 0.307369] pci_bus 0000:00: resource 15 [mem 0xffc00000-0xffdfffff] [ 0.307371] pci_bus 0000:00: resource 16 [mem 0x120000000-0x317ffffff] [ 0.307374] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] [ 0.307378] pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfeafffff] [ 0.307381] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref] [ 0.307385] pci_bus 0000:09: resource 0 [io 0xc000-0xcfff] [ 0.307388] pci_bus 0000:09: resource 1 [mem 0xf9f00000-0xf9ffffff] [ 0.307391] pci_bus 0000:09: resource 2 [mem 0xf0400000-0xf05fffff 64bit pref] [ 0.307395] pci_bus 0000:0b: resource 0 [io 0x2000-0x2fff] [ 0.307398] pci_bus 0000:0b: resource 1 [mem 0xf9e00000-0xf9efffff] [ 0.307402] pci_bus 0000:0b: resource 2 [mem 0xf0200000-0xf03fffff 64bit pref] [ 0.307406] pci_bus 0000:0c: resource 0 [io 0xb000-0xbfff] [ 0.307409] pci_bus 0000:0c: resource 1 [mem 0xf9c00000-0xf9dfffff] [ 0.307412] pci_bus 0000:0c: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref] [ 0.307416] pci_bus 0000:03: resource 1 [mem 0xf9b00000-0xf9bfffff] [ 0.307420] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7] [ 0.307423] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff] [ 0.307426] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff] [ 0.307429] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff] [ 0.307433] pci_bus 0000:03: resource 8 [mem 0xe0000000-0xf3ffffff] [ 0.307436] pci_bus 0000:03: resource 9 [mem 0xf8000000-0xfebfffff] [ 0.307439] pci_bus 0000:03: resource 10 [mem 0xfec10000-0xfecfffff] [ 0.307443] pci_bus 0000:03: resource 11 [mem 0xfed1c000-0xfed1ffff] [ 0.307446] pci_bus 0000:03: resource 12 [mem 0xfed90000-0xfed9ffff] [ 0.307449] pci_bus 0000:03: resource 13 [mem 0xfeda7000-0xfedfffff] [ 0.307453] pci_bus 0000:03: resource 14 [mem 0xfee10000-0xff9fffff] [ 0.307456] pci_bus 0000:03: resource 15 [mem 0xffc00000-0xffdfffff] [ 0.307459] pci_bus 0000:03: resource 16 [mem 0x120000000-0x317ffffff] [ 0.307510] NET: Registered protocol family 2 [ 0.307678] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.309002] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.313691] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.314295] TCP: Hash tables configured (established 524288 bind 65536) [ 0.314298] TCP reno registered [ 0.314310] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.314365] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.314542] NET: Registered protocol family 1 [ 0.314590] pci 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.314613] pci 0000:00:1a.0: PCI INT A disabled [ 0.314625] pci 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.314646] pci 0000:00:1a.1: PCI INT B disabled [ 0.314660] pci 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 0.314712] pci 0000:00:1a.7: PCI INT C disabled [ 0.314734] pci 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.314756] pci 0000:00:1d.0: PCI INT A disabled [ 0.314764] pci 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.314786] pci 0000:00:1d.1: PCI INT B disabled [ 0.314795] pci 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 0.314816] pci 0000:00:1d.2: PCI INT C disabled [ 0.314827] pci 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.314854] pci 0000:00:1d.7: PCI INT A disabled [ 0.314892] pci 0000:01:00.0: Boot video device [ 0.314952] PCI: CLS 64 bytes, default 64 [ 0.314955] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.314958] Placing 64MB software IO TLB between ffff8800dbe6c000 - ffff8800dfe6c000 [ 0.314960] software IO TLB at phys 0xdbe6c000 - 0xdfe6c000 [ 0.314973] Simple Boot Flag at 0x79 set to 0x1 [ 0.315382] audit: initializing netlink socket (disabled) [ 0.315392] type=2000 audit(1349047133.308:1): initialized [ 0.339730] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.342388] VFS: Disk quotas dquot_6.5.2 [ 0.342450] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.343018] fuse init (API version 7.17) [ 0.343117] msgmni has been set to 7872 [ 0.343466] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.343495] io scheduler noop registered [ 0.343497] io scheduler deadline registered [ 0.343533] io scheduler cfq registered (default) [ 0.343662] pcieport 0000:00:01.0: setting latency timer to 64 [ 0.343699] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X [ 0.343753] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.343810] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X [ 0.343897] pcieport 0000:00:1c.1: setting latency timer to 64 [ 0.343954] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X [ 0.344065] pcieport 0000:00:1c.4: setting latency timer to 64 [ 0.344122] pcieport 0000:00:1c.4: irq 43 for MSI/MSI-X [ 0.344227] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.344254] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.344316] intel_idle: MWAIT substates: 0x3122220 [ 0.344318] intel_idle: does not run on family 6 model 23 [ 0.344399] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 0.344452] ACPI: AC Adapter [AC] (on-line) [ 0.344534] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0 [ 0.492356] ACPI: Lid Switch [LID] [ 0.492403] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 0.492409] ACPI: Power Button [PBTN] [ 0.492453] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 [ 0.492457] ACPI: Sleep Button [SBTN] [ 0.508085] Monitor-Mwait will be used to enter C-1 state [ 0.508129] Monitor-Mwait will be used to enter C-2 state [ 0.516026] Monitor-Mwait will be used to enter C-3 state [ 0.516039] Marking TSC unstable due to TSC halts in idle [ 0.516057] ACPI: acpi_idle registered with cpuidle [ 0.517987] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.517990] ACPI: Thermal Zone [THM] (65 C) [ 0.518020] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 0.518030] ACPI: Battery Slot [BAT0] (battery present) [ 0.518057] ERST: Table is not found! [ 0.518058] GHES: HEST is not enabled! [ 0.518187] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.536795] ACPI: Battery Slot [BAT0] (battery present) [ 0.656218] Freeing initrd memory: 13880k freed [ 0.768419] Linux agpgart interface v0.103 [ 0.770287] brd: module loaded [ 0.771209] loop: module loaded [ 0.771407] ata_piix 0000:00:1f.1: version 2.13 [ 0.771423] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.771469] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 0.771852] scsi0 : ata_piix [ 0.771953] scsi1 : ata_piix [ 0.772272] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x6fa0 irq 14 [ 0.772275] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x6fa8 irq 15 [ 0.772298] ata_piix 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.772310] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 0.772457] ata2: port disabled--ignoring [ 0.928068] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 0.928395] scsi2 : ata_piix [ 0.928485] scsi3 : ata_piix [ 0.928764] ata3: SATA max UDMA/133 cmd 0x6eb0 ctl 0x6eb8 bmdma 0x6ee0 irq 17 [ 0.928772] ata4: SATA max UDMA/133 cmd 0x6ec0 ctl 0x6ec8 bmdma 0x6ee8 irq 17 [ 0.929161] Fixed MDIO Bus: probed [ 0.929183] tun: Universal TUN/TAP device driver, 1.6 [ 0.929185] tun: (C) 1999-2004 Max Krasnyansky [ 0.929241] PPP generic driver version 2.4.2 [ 0.929371] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.929390] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 0.929419] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 0.929423] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 0.929472] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 0.929506] ehci_hcd 0000:00:1a.7: debug port 1 [ 0.933390] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported [ 0.933405] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400 [ 0.936530] ata1.00: ATAPI: Optiarc DVD+/-RW AD-7640A, JD06, max UDMA/33 [ 0.948016] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 0.948173] hub 1-0:1.0: USB hub found [ 0.948177] hub 1-0:1.0: 4 ports detected [ 0.948258] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.948272] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.948275] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.948325] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.948359] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.952253] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported [ 0.952511] ata1.00: configured for UDMA/33 [ 0.952513] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000 [ 0.954705] scsi 0:0:0:0: CD-ROM Optiarc DVD+-RW AD-7640A JD06 PQ: 0 ANSI: 5 [ 0.958241] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda caddy [ 0.958245] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 0.958374] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 0.958503] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 0.968023] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.968169] hub 2-0:1.0: USB hub found [ 0.968173] hub 2-0:1.0: 6 ports detected [ 0.968259] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.968275] uhci_hcd: USB Universal Host Controller Interface driver [ 0.968296] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.968305] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 0.968309] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 0.968363] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 0.968392] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f20 [ 0.968533] hub 3-0:1.0: USB hub found [ 0.968537] hub 3-0:1.0: 2 ports detected [ 0.968607] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.968616] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 0.968619] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 0.968675] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 0.968713] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f00 [ 0.968850] hub 4-0:1.0: USB hub found [ 0.968854] hub 4-0:1.0: 2 ports detected [ 0.968927] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.968937] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.968941] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.968988] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 0.969016] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f80 [ 0.969154] hub 5-0:1.0: USB hub found [ 0.969159] hub 5-0:1.0: 2 ports detected [ 0.969233] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.969241] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.969244] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.969291] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 0.969319] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f60 [ 0.969455] hub 6-0:1.0: USB hub found [ 0.969459] hub 6-0:1.0: 2 ports detected [ 0.969528] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 0.969536] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.969540] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.969588] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 0.969615] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40 [ 0.969754] hub 7-0:1.0: USB hub found [ 0.969759] hub 7-0:1.0: 2 ports detected [ 0.969881] usbcore: registered new interface driver libusual [ 0.969926] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.981179] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.981185] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.981334] mousedev: PS/2 mouse device common for all mice [ 0.982113] rtc_cmos 00:04: RTC can wake from S4 [ 0.982248] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 0.982282] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.982367] device-mapper: uevent: version 1.0.3 [ 0.982446] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 0.982515] cpuidle: using governor ladder [ 0.982608] cpuidle: using governor menu [ 0.982610] EFI Variables Facility v0.08 2004-May-17 [ 0.982883] TCP cubic registered [ 0.982995] NET: Registered protocol family 10 [ 0.983595] NET: Registered protocol family 17 [ 0.983600] Registering the dns_resolver key type [ 0.983806] PM: Hibernation image not present or could not be loaded. [ 0.983819] registered taskstats version 1 [ 0.991062] Magic number: 12:984:353 [ 0.991161] rapidio: hash matches [ 0.991209] rtc_cmos 00:04: setting system clock to 2012-09-30 23:18:54 UTC (1349047134) [ 0.992091] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.992093] EDD information not available. [ 1.010053] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 1.260084] usb 1-1: new high-speed USB device number 2 using ehci_hcd [ 1.620060] usb 2-3: new high-speed USB device number 2 using ehci_hcd [ 1.724156] ata3.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.724178] ata3.01: SATA link down (SStatus 0 SControl 300) [ 1.733196] ata3.00: ATA-8: WDC WD3200BPVT-00ZEST0, 01.01A01, max UDMA/133 [ 1.733202] ata3.00: 625142448 sectors, multi 8: LBA48 NCQ (depth 0/32) [ 1.749185] ata3.00: configured for UDMA/133 [ 1.749383] scsi 2:0:0:0: Direct-Access ATA WDC WD3200BPVT-0 01.0 PQ: 0 ANSI: 5 [ 1.749527] sd 2:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 1.749530] sd 2:0:0:0: [sda] 4096-byte physical blocks [ 1.749538] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 1.749586] sd 2:0:0:0: [sda] Write Protect is off [ 1.749589] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.749650] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.755402] Initializing USB Mass Storage driver... [ 1.755578] scsi4 : usb-storage 2-3:1.0 [ 1.755646] usbcore: registered new interface driver usb-storage [ 1.755648] USB Mass Storage support registered. [ 1.829105] sda: sda1 sda2 < sda5 sda6 > [ 1.829866] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.992054] usb 3-2: new full-speed USB device number 2 using uhci_hcd [ 2.276229] ata4.01: failed to resume link (SControl 0) [ 2.276286] ata4.00: SATA link down (SStatus 0 SControl 300) [ 2.276312] ata4.01: SATA link down (SStatus 0 SControl 0) [ 2.278005] Freeing unused kernel memory: 920k freed [ 2.278299] Write protecting the kernel read-only data: 12288k [ 2.283800] Freeing unused kernel memory: 1616k freed [ 2.288495] Freeing unused kernel memory: 1200k freed [ 2.305674] udevd[104]: starting version 175 [ 2.401940] sky2: driver version 1.30 [ 2.401985] sky2 0000:09:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.402002] sky2 0000:09:00.0: setting latency timer to 64 [ 2.402040] sky2 0000:09:00.0: Yukon-2 FE+ chip revision 0 [ 2.402155] sky2 0000:09:00.0: irq 44 for MSI/MSI-X [ 2.409623] b43-pci-bridge 0000:0b:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 2.409641] b43-pci-bridge 0000:0b:00.0: setting latency timer to 64 [ 2.410023] sky2 0000:09:00.0: eth0: addr 00:23:ae:1b:a0:33 [ 2.419965] firewire_ohci 0000:03:09.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.426498] sdhci: Secure Digital Host Controller Interface driver [ 2.426502] sdhci: Copyright(c) Pierre Ossman [ 2.428181] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x16, vendor 0x4243) [ 2.428200] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0F, vendor 0x4243) [ 2.428218] ssb: Core 2 found: PCMCIA (cc 0x80D, rev 0x0A, vendor 0x4243) [ 2.428236] ssb: Core 3 found: PCI-E (cc 0x820, rev 0x09, vendor 0x4243) [ 2.484151] firewire_ohci: Added fw-ohci device 0000:03:09.0, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x11 [ 2.484252] sdhci-pci 0000:03:09.1: SDHCI controller found [1180:0822] (rev 22) [ 2.484282] sdhci-pci 0000:03:09.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [ 2.485331] mmc0: no vmmc regulator found [ 2.486355] Registered led device: mmc0:: [ 2.488402] mmc0: SDHCI controller on PCI [0000:03:09.1] using DMA [ 2.500200] ssb: Sonics Silicon Backplane found on PCI device 0000:0b:00.0 [ 2.754491] scsi 4:0:0:0: Direct-Access WD My Passport 071A 2019 PQ: 0 ANSI: 4 [ 2.757427] scsi 4:0:0:1: Enclosure WD SES Device 2019 PQ: 0 ANSI: 4 [ 2.758135] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 2.758302] scsi 4:0:0:1: Attached scsi generic sg3 type 13 [ 2.760456] sd 4:0:0:0: [sdb] 976717824 512-byte logical blocks: (500 GB/465 GiB) [ 2.763472] sd 4:0:0:0: [sdb] Write Protect is off [ 2.763479] sd 4:0:0:0: [sdb] Mode Sense: 2b 00 10 08 [ 2.766350] sd 4:0:0:0: [sdb] No Caching mode page present [ 2.766354] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 2.774224] sd 4:0:0:0: [sdb] No Caching mode page present [ 2.774229] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 2.774849] sdb: sdb1 [ 2.781974] sd 4:0:0:0: [sdb] No Caching mode page present [ 2.781980] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 2.781985] sd 4:0:0:0: [sdb] Attached SCSI disk [ 2.849919] EXT4-fs (sda5): INFO: recovery required on readonly filesystem [ 2.849923] EXT4-fs (sda5): write access will be enabled during recovery [ 2.921677] EXT4-fs (sda5): orphan cleanup on readonly fs [ 2.921684] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2887292 [ 2.921738] EXT4-fs (sda5): 1 orphan inode deleted [ 2.921741] EXT4-fs (sda5): recovery complete [ 2.984225] firewire_core: created device fw0: GUID 334fc0000b10ee01, S400 [ 3.135512] ses 4:0:0:1: Attached Enclosure device [ 3.262564] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) [ 6.375409] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 6.588833] Adding 4190204k swap on /dev/sda6. Priority:-1 extents:1 across:4190204k [ 6.706580] udevd[405]: starting version 175 [ 7.860283] wmi: Mapper loaded [ 8.249819] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro [ 8.479481] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 8.610022] acpi device:31: registered as cooling_device2 [ 8.610482] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:2e/LNXVIDEO:00/input/input4 [ 8.610539] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 8.738422] r592 0000:03:09.2: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [ 8.738536] r592: driver successfully loaded [ 8.807701] Linux video capture interface: v2.00 [ 8.866038] lp: driver loaded but no devices found [ 8.875651] input: Dell WMI hotkeys as /devices/virtual/input/input5 [ 9.003707] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 9.003787] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X [ 9.003823] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [ 9.178885] uvcvideo: Found UVC 1.00 device Laptop Integrated Webcam (05a9:2640) [ 9.180488] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround. [ 9.181169] input: Laptop Integrated Webcam as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1:1.0/input/input6 [ 9.181394] usbcore: registered new interface driver uvcvideo [ 9.181396] USB Video Class driver (1.1.1) [ 9.694461] r852 0000:03:09.3: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [ 9.694567] r852: driver loaded successfully [ 9.713283] cfg80211: Calling CRDA to update world regulatory domain [ 9.714873] [drm] Initialized drm 1.1.0 20060810 [ 9.757606] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input7 [ 9.784106] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input8 [ 10.036956] type=1400 audit(1349061543.543:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=674 comm="apparmor_parser" [ 10.036968] type=1400 audit(1349061543.543:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=599 comm="apparmor_parser" [ 10.037375] type=1400 audit(1349061543.543:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=674 comm="apparmor_parser" [ 10.037383] type=1400 audit(1349061543.543:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=599 comm="apparmor_parser" [ 10.037610] type=1400 audit(1349061543.543:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=674 comm="apparmor_parser" [ 10.037619] type=1400 audit(1349061543.543:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=599 comm="apparmor_parser" [ 10.570003] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 10.570012] nouveau 0000:01:00.0: setting latency timer to 64 [ 10.571804] [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x086700a2) [ 10.577279] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN [ 10.658099] [drm] nouveau 0000:01:00.0: ... appears to be valid [ 10.658104] [drm] nouveau 0000:01:00.0: BIT BIOS found [ 10.658107] [drm] nouveau 0000:01:00.0: Bios version 60.86.51.00 [ 10.658111] [drm] nouveau 0000:01:00.0: TMDS table version 2.0 [ 10.658114] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0 [ 10.658118] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01000323 00010034 [ 10.658121] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 02012300 00000028 [ 10.658123] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 02021312 00020010 [ 10.658125] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 010333f1 00c0c080 [ 10.658127] [drm] nouveau 0000:01:00.0: Raw DCB entry 4: 0000000e 00000000 [ 10.658131] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 14 2 [ 10.658134] [drm] nouveau 0000:01:00.0: 0: 0x00000040: type 0x40 idx 0 tag 0xff [ 10.658137] [drm] nouveau 0000:01:00.0: 1: 0x00001161: type 0x61 idx 1 tag 0x07 [ 10.658140] [drm] nouveau 0000:01:00.0: 2: 0x00000200: type 0x00 idx 2 tag 0xff [ 10.658142] [drm] nouveau 0000:01:00.0: 3: 0x00000310: type 0x10 idx 3 tag 0xff [ 10.658145] [drm] nouveau 0000:01:00.0: 4: 0x00000311: type 0x11 idx 4 tag 0xff [ 10.658148] [drm] nouveau 0000:01:00.0: 5: 0x00000313: type 0x13 idx 5 tag 0xff [ 10.658153] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xC6D1 [ 10.681228] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xCA48 [ 10.697952] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xD49D [ 10.697963] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xD58F [ 10.699040] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xD789 [ 10.699043] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xD7EE [ 10.712068] b43-phy0: Broadcom 4312 WLAN found (core revision 15) [ 10.718893] [drm] nouveau 0000:01:00.0: 0xD7EE: Condition still not met after 20ms, skipping following opcodes [ 10.738099] [drm] nouveau 0000:01:00.0: 3 available performance level(s) [ 10.738105] [drm] nouveau 0000:01:00.0: 0: core 169MHz shader 338MHz memory 100MHz timing 0 voltage 1150mV fanspeed 100% [ 10.738109] [drm] nouveau 0000:01:00.0: 1: core 275MHz shader 550MHz memory 301MHz timing 1 voltage 1150mV fanspeed 100% [ 10.738114] [drm] nouveau 0000:01:00.0: 2: core 400MHz shader 800MHz memory 600MHz timing 2 voltage 1150mV fanspeed 100% [ 10.738137] [drm] nouveau 0000:01:00.0: c: core 275MHz shader 550MHz memory 302MHz voltage 1200mV [ 10.741004] [TTM] Zone kernel: Available graphics memory: 2024174 kiB. [ 10.741007] [TTM] Initializing pool allocator. [ 10.741020] [drm] nouveau 0000:01:00.0: Detected 128MiB VRAM [ 10.741027] mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining [ 10.741046] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture) [ 10.759793] [drm] nouveau 0000:01:00.0: DCB encoder 1 unknown [ 10.759796] [drm] nouveau 0000:01:00.0: TV-1 has no encoders, removing [ 10.760989] [drm] nouveau 0000:01:00.0: ACPI backlight interface available, not registering our own [ 10.784288] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 10.784293] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 10.784295] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 10.784298] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 10.784301] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 10.784303] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 10.784306] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 10.784309] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 10.784311] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 10.784314] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 10.784316] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 10.784319] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 10.784321] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 10.784324] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 10.784327] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 10.784330] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 10.784332] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 10.784335] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 10.784337] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 10.784340] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 10.784342] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 10.784345] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 10.784347] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule: [ 10.784350] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (600 mBi, 2000 mBm) [ 10.784353] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule: [ 10.784356] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (600 mBi, 2000 mBm) [ 10.784358] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule: [ 10.784361] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (600 mBi, 2000 mBm) [ 10.786611] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 10.786613] [drm] No driver support for vblank timestamp query. [ 11.096634] [drm] nouveau 0000:01:00.0: allocated 1280x800 fb: 0x310000, bo ffff880117cd4800 [ 11.096776] fbcon: nouveaufb (fb0) is primary device [ 11.096967] Console: switching to colour frame buffer device 160x50 [ 11.096992] fb0: nouveaufb frame buffer device [ 11.096994] drm: registered panic notifier [ 11.097002] [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0 [ 11.390722] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 11.391441] Registered led device: b43-phy0::tx [ 11.391463] Registered led device: b43-phy0::rx [ 11.391486] Registered led device: b43-phy0::radio [ 11.391502] Broadcom 43xx driver loaded [ Features: PNL ] [ 11.962414] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 11.962419] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 11.962422] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 11.962425] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 11.962427] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 11.962430] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 11.962432] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 11.962435] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 11.962438] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 11.962440] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 11.962443] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 11.962446] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 11.962448] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 11.962451] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 11.962453] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 11.962456] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 11.962458] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 11.962461] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 11.962464] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 11.962466] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 11.962469] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 11.962472] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 11.962474] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule: [ 11.962477] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 11.962479] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule: [ 11.962482] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 11.962484] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule: [ 11.962487] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 11.962491] cfg80211: World regulatory domain updated: [ 11.962492] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 11.962495] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 11.962498] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 11.962501] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 11.962503] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 11.962506] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 12.931652] init: failsafe main process (899) killed by TERM signal [ 14.056950] ppdev: user-space parallel port driver [ 14.567624] Bluetooth: Core ver 2.16 [ 14.567647] NET: Registered protocol family 31 [ 14.567649] Bluetooth: HCI device and connection manager initialized [ 14.567652] Bluetooth: HCI socket layer initialized [ 14.567654] Bluetooth: L2CAP socket layer initialized [ 14.567660] Bluetooth: SCO socket layer initialized [ 14.591675] type=1400 audit(1349061548.095:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=976 comm="apparmor_parser" [ 14.592168] type=1400 audit(1349061548.099:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=976 comm="apparmor_parser" [ 14.627758] Bluetooth: RFCOMM TTY layer initialized [ 14.627763] Bluetooth: RFCOMM socket layer initialized [ 14.627765] Bluetooth: RFCOMM ver 1.11 [ 14.944563] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 14.944567] Bluetooth: BNEP filters: protocol multicast [ 16.243437] type=1400 audit(1349061549.747:10): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1022 comm="apparmor_parser" [ 16.243859] type=1400 audit(1349061549.747:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1022 comm="apparmor_parser" [ 16.244134] type=1400 audit(1349061549.751:12): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1022 comm="apparmor_parser" [ 16.704946] type=1400 audit(1349061550.211:13): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1021 comm="apparmor_parser" [ 16.777667] type=1400 audit(1349061550.283:14): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=1028 comm="apparmor_parser" [ 16.778167] type=1400 audit(1349061550.283:15): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=1028 comm="apparmor_parser" [ 16.782235] type=1400 audit(1349061550.287:16): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1029 comm="apparmor_parser" [ 16.782746] type=1400 audit(1349061550.287:17): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1029 comm="apparmor_parser" [ 16.796763] sky2 0000:09:00.0: eth0: enabling interface [ 16.797327] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 16.797937] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 16.844453] type=1400 audit(1349061550.351:18): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=1023 comm="apparmor_parser" [ 16.850184] type=1400 audit(1349061550.355:19): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//launchpad_integration" pid=1023 comm="apparmor_parser" [ 17.148089] b43-phy0: Loading firmware version 478.104 (2008-07-01 00:50:23) [ 18.976331] sky2 0000:09:00.0: eth0: Link is up at 10 Mbps, half duplex, flow control none [ 23.209273] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 23.209862] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 23.210974] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 28.920819] wlan0: direct probe to 00:0e:83:28:76:c2 (try 1/3) [ 29.120070] wlan0: direct probe to 00:0e:83:28:76:c2 (try 2/3) [ 29.320051] wlan0: direct probe to 00:0e:83:28:76:c2 (try 3/3) [ 29.522149] wlan0: direct probe to 00:0e:83:28:76:c2 timed out [ 33.952076] eth0: no IPv6 routers present [ 35.865194] wlan0: direct probe to 00:0e:83:28:76:c2 (try 1/3) [ 36.064085] wlan0: direct probe to 00:0e:83:28:76:c2 (try 2/3) [ 36.264050] wlan0: direct probe to 00:0e:83:28:76:c2 (try 3/3) [ 36.464071] wlan0: direct probe to 00:0e:83:28:76:c2 timed out [ 42.792907] wlan0: direct probe to 00:0e:84:2b:4b:62 (try 1/3) [ 42.992203] wlan0: direct probe to 00:0e:84:2b:4b:62 (try 2/3) [ 43.192108] wlan0: direct probe to 00:0e:84:2b:4b:62 (try 3/3) [ 43.392050] wlan0: direct probe to 00:0e:84:2b:4b:62 timed out [ 49.729094] wlan0: direct probe to 00:0e:83:28:76:c2 (try 1/3) [ 49.928049] wlan0: direct probe to 00:0e:83:28:76:c2 (try 2/3) [ 50.128037] wlan0: direct probe to 00:0e:83:28:76:c2 (try 3/3) [ 50.328058] wlan0: direct probe to 00:0e:83:28:76:c2 timed out [ 56.640577] wlan0: direct probe to 00:0e:83:28:76:c2 (try 1/3) [ 56.840059] wlan0: direct probe to 00:0e:83:28:76:c2 (try 2/3) [ 57.040070] wlan0: direct probe to 00:0e:83:28:76:c2 (try 3/3) [ 57.240058] wlan0: direct probe to 00:0e:83:28:76:c2 timed out [ 63.592815] wlan0: direct probe to 00:0e:83:28:76:c2 (try 1/3) [ 63.792262] wlan0: direct probe to 00:0e:83:28:76:c2 (try 2/3) [ 63.992227] wlan0: direct probe to 00:0e:83:28:76:c2 (try 3/3) [ 64.192282] wlan0: direct probe to 00:0e:83:28:76:c2 timed out [ 70.720609] wlan0: direct probe to 00:0e:83:28:76:c2 (try 1/3) [ 70.920092] wlan0: direct probe to 00:0e:83:28:76:c2 (try 2/3) [ 71.120171] wlan0: direct probe to 00:0e:83:28:76:c2 (try 3/3) [ 71.320058] wlan0: direct probe to 00:0e:83:28:76:c2 timed out [ 77.612764] wlan0: direct probe to 00:0e:83:28:76:c2 (try 1/3) [ 77.812304] wlan0: direct probe to 00:0e:83:28:76:c2 (try 2/3) [ 78.012263] wlan0: direct probe to 00:0e:83:28:76:c2 (try 3/3) [ 78.212257] wlan0: direct probe to 00:0e:83:28:76:c2 timed out [ 92.308626] wlan0: direct probe to 00:0e:83:28:76:c2 (try 1/3) [ 92.508072] wlan0: direct probe to 00:0e:83:28:76:c2 (try 2/3) [ 92.708049] wlan0: direct probe to 00:0e:83:28:76:c2 (try 3/3) [ 92.908040] wlan0: direct probe to 00:0e:83:28:76:c2 timed out [ 99.224558] wlan0: authenticate with 00:0e:83:28:76:c2 (try 1) [ 99.424050] wlan0: authenticate with 00:0e:83:28:76:c2 (try 2) [ 99.624100] wlan0: authenticate with 00:0e:83:28:76:c2 (try 3) [ 99.824263] wlan0: authentication with 00:0e:83:28:76:c2 timed out [ 106.122621] wlan0: direct probe to 00:0e:83:28:76:c2 (try 1/3) [ 106.320054] wlan0: direct probe to 00:0e:83:28:76:c2 (try 2/3) [ 106.520058] wlan0: direct probe to 00:0e:83:28:76:c2 (try 3/3) [ 106.720058] wlan0: direct probe to 00:0e:83:28:76:c2 timed out [ 113.040885] wlan0: direct probe to 00:0e:83:28:76:c2 (try 1/3) [ 113.240120] wlan0: direct probe to 00:0e:83:28:76:c2 (try 2/3) [ 113.444047] wlan0: direct probe to 00:0e:83:28:76:c2 (try 3/3) [ 113.644060] wlan0: direct probe to 00:0e:83:28:76:c2 timed out [ 119.973103] wlan0: direct probe to 00:0e:83:28:76:c2 (try 1/3) [ 120.172070] wlan0: direct probe to 00:0e:83:28:76:c2 (try 2/3) [ 120.372076] wlan0: direct probe to 00:0e:83:28:76:c2 (try 3/3) [ 120.572080] wlan0: direct probe to 00:0e:83:28:76:c2 timed out [ 126.896836] wlan0: direct probe to 00:0e:83:28:76:c2 (try 1/3) [ 127.096061] wlan0: direct probe to 00:0e:83:28:76:c2 (try 2/3) [ 127.296116] wlan0: direct probe to 00:0e:83:28:76:c2 (try 3/3) [ 127.499971] wlan0: direct probe to 00:0e:83:28:76:c2 timed out [ 133.812807] wlan0: direct probe to 00:0e:84:2b:4b:62 (try 1/3) [ 134.012040] wlan0: direct probe to 00:0e:84:2b:4b:62 (try 2/3) [ 134.212924] wlan0: direct probe to 00:0e:84:2b:4b:62 (try 3/3) [ 134.412048] wlan0: direct probe to 00:0e:84:2b:4b:62 timed out [ 147.013713] wlan0: direct probe to 00:0e:83:28:76:c2 (try 1/3) [ 147.212091] wlan0: direct probe to 00:0e:83:28:76:c2 (try 2/3) [ 147.412074] wlan0: direct probe to 00:0e:83:28:76:c2 (try 3/3) [ 147.612042] wlan0: direct probe to 00:0e:83:28:76:c2 timed out [ 155.308663] wlan0: direct probe to 00:0e:83:28:76:c2 (try 1/3) [ 155.508262] wlan0: direct probe to 00:0e:83:28:76:c2 (try 2/3) [ 155.708274] wlan0: direct probe to 00:0e:83:28:76:c2 (try 3/3) [ 155.908090] wlan0: direct probe to 00:0e:83:28:76:c2 timed out [ 162.220866] wlan0: direct probe to 00:0e:83:28:76:c2 (try 1/3) [ 162.420285] wlan0: direct probe to 00:0e:83:28:76:c2 (try 2/3) [ 162.620246] wlan0: direct probe to 00:0e:83:28:76:c2 (try 3/3) [ 162.820320] wlan0: direct probe to 00:0e:83:28:76:c2 timed out [ 169.113514] wlan0: direct probe to 00:0e:83:28:76:c2 (try 1/3) [ 169.312047] wlan0: direct probe to 00:0e:83:28:76:c2 (try 2/3) [ 169.512061] wlan0: direct probe to 00:0e:83:28:76:c2 (try 3/3) [ 169.712078] wlan0: direct probe to 00:0e:83:28:76:c2 timed out [ 176.005140] wlan0: direct probe to 00:0e:83:28:76:c2 (try 1/3) [ 176.204264] wlan0: direct probe to 00:0e:83:28:76:c2 (try 2/3) [ 176.404326] wlan0: direct probe to 00:0e:83:28:76:c2 (try 3/3) [ 176.604058] wlan0: direct probe to 00:0e:83:28:76:c2 timed out [ 182.904816] wlan0: direct probe to 00:0e:83:28:76:c2 (try 1/3) [ 183.104216] wlan0: direct probe to 00:0e:83:28:76:c2 (try 2/3) [ 183.304153] wlan0: direct probe to 00:0e:83:28:76:c2 (try 3/3) [ 183.504221] wlan0: direct probe to 00:0e:83:28:76:c2 timed out [ 189.812946] wlan0: direct probe to 00:0e:83:28:76:c2 (try 1/3) [ 190.012282] wlan0: direct probe to 00:0e:83:28:76:c2 (try 2/3) [ 190.212250] wlan0: direct probe to 00:0e:83:28:76:c2 (try 3/3) [ 190.412283] wlan0: direct probe to 00:0e:83:28:76:c2 timed out [ 196.705165] wlan0: direct probe to 00:0e:83:28:76:c2 (try 1/3) [ 196.904206] wlan0: direct probe to 00:0e:83:28:76:c2 (try 2/3) [ 197.104230] wlan0: direct probe to 00:0e:83:28:76:c2 (try 3/3) [ 197.304140] wlan0: direct probe to 00:0e:83:28:76:c2 timed out [ 203.608814] wlan0: direct probe to 00:0e:83:28:76:c2 (try 1/3) [ 203.808278] wlan0: direct probe to 00:0e:83:28:76:c2 (try 2/3) [ 204.008195] wlan0: direct probe to 00:0e:83:28:76:c2 (try 3/3) [ 204.208241] wlan0: direct probe to 00:0e:83:28:76:c2 timed out [ 210.521349] wlan0: direct probe to 00:0e:83:28:76:c2 (try 1/3) [ 210.720043] wlan0: direct probe to 00:0e:83:28:76:c2 (try 2/3) [ 210.920068] wlan0: direct probe to 00:0e:83:28:76:c2 (try 3/3) [ 211.120070] wlan0: direct probe to 00:0e:83:28:76:c2 timed out [ 218.304831] wlan0: direct probe to 00:0e:83:28:76:c2 (try 1/3) [ 218.504273] wlan0: direct probe to 00:0e:83:28:76:c2 (try 2/3) [ 218.704063] wlan0: direct probe to 00:0e:83:28:76:c2 (try 3/3) [ 218.904286] wlan0: direct probe to 00:0e:83:28:76:c2 timed out [ 225.200621] wlan0: direct probe to 00:0e:83:28:76:c2 (try 1/3) [ 225.404074] wlan0: direct probe to 00:0e:83:28:76:c2 (try 2/3) [ 225.604054] wlan0: direct probe to 00:0e:83:28:76:c2 (try 3/3) [ 225.804063] wlan0: direct probe to 00:0e:83:28:76:c2 timed out [ 232.113839] wlan0: direct probe to 00:0e:83:28:76:c2 (try 1/3) [ 232.312080] wlan0: direct probe to 00:0e:83:28:76:c2 (try 2/3) [ 232.512248] wlan0: direct probe to 00:0e:83:28:76:c2 (try 3/3) [ 232.712288] wlan0: direct probe to 00:0e:83:28:76:c2 timed out [ 239.005267] wlan0: authenticate with 00:0e:83:28:76:c2 (try 1) [ 239.204099] wlan0: authenticate with 00:0e:83:28:76:c2 (try 2) [ 239.404094] wlan0: authenticate with 00:0e:83:28:76:c2 (try 3) [ 239.608055] wlan0: authentication with 00:0e:83:28:76:c2 timed out [ 245.925952] wlan0: direct probe to 00:0e:83:28:76:c2 (try 1/3) [ 246.124068] wlan0: direct probe to 00:0e:83:28:76:c2 (try 2/3) [ 246.324084] wlan0: direct probe to 00:0e:83:28:76:c2 (try 3/3) [ 246.524063] wlan0: direct probe to 00:0e:83:28:76:c2 timed out [ 252.832842] wlan0: direct probe to 00:0e:83:28:76:c2 (try 1/3) [ 253.032172] wlan0: direct probe to 00:0e:83:28:76:c2 (try 2/3) [ 253.232121] wlan0: direct probe to 00:0e:83:28:76:c2 (try 3/3) [ 253.432101] wlan0: direct probe to 00:0e:83:28:76:c2 timed out [ 259.720530] wlan0: direct probe to 00:0e:83:28:76:c2 (try 1/3) [ 259.920038] wlan0: direct probe to 00:0e:83:28:76:c2 (try 2/3) [ 260.120080] wlan0: direct probe to 00:0e:83:28:76:c2 (try 3/3) [ 260.320072] wlan0: direct probe to 00:0e:83:28:76:c2 timed out [ 266.608772] wlan0: direct probe to 00:0e:83:28:76:c2 (try 1/3) [ 266.808273] wlan0: direct probe to 00:0e:83:28:76:c2 (try 2/3) [ 267.008208] wlan0: direct probe to 00:0e:83:28:76:c2 (try 3/3) [ 267.208046] wlan0: direct probe to 00:0e:83:28:76:c2 timed out [ 273.500820] wlan0: authenticate with 00:0e:83:28:76:c2 (try 1) [ 273.700288] wlan0: authenticate with 00:0e:83:28:76:c2 (try 2) [ 273.900249] wlan0: authenticate with 00:0e:83:28:76:c2 (try 3) [ 274.100260] wlan0: authentication with 00:0e:83:28:76:c2 timed out [ 578.300912] wlan0: direct probe to 00:0e:83:28:76:c2 (try 1/3) [ 578.500295] wlan0: direct probe to 00:0e:83:28:76:c2 (try 2/3) [ 578.700276] wlan0: direct probe to 00:0e:83:28:76:c2 (try 3/3) [ 578.900281] wlan0: direct probe to 00:0e:83:28:76:c2 timed out [ 585.200726] wlan0: direct probe to 00:0e:83:28:76:c2 (try 1/3) [ 585.400223] wlan0: direct probe to 00:0e:83:28:76:c2 (try 2/3) [ 585.600288] wlan0: direct probe to 00:0e:83:28:76:c2 (try 3/3) [ 585.800264] wlan0: direct probe to 00:0e:83:28:76:c2 timed out [ 592.105227] wlan0: direct probe to 00:0e:83:28:76:c2 (try 1/3) [ 592.304151] wlan0: direct probe to 00:0e:83:28:76:c2 (try 2/3) [ 592.504281] wlan0: direct probe to 00:0e:83:28:76:c2 (try 3/3) [ 592.506620] wlan0: direct probe responded [ 592.508593] wlan0: authenticate with 00:0e:83:28:76:c2 (try 1) [ 592.708292] wlan0: authenticate with 00:0e:83:28:76:c2 (try 2) [ 592.710162] wlan0: authenticated [ 592.711382] wlan0: associate with 00:0e:83:28:76:c2 (try 1) [ 592.908237] wlan0: associate with 00:0e:83:28:76:c2 (try 2) [ 592.912449] wlan0: RX AssocResp from 00:0e:83:28:76:c2 (capab=0x421 status=0 aid=22) [ 592.912457] wlan0: associated [ 592.915243] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 592.915415] cfg80211: Calling CRDA for country: US [ 592.927536] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 592.927541] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 592.927544] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 592.927546] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 592.927549] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 592.927552] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 592.927554] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 592.927557] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 592.927559] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 592.927562] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 592.927565] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 592.927568] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 592.927570] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 592.927573] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 592.927575] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 592.927578] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 592.927581] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 592.927583] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 592.927586] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 592.927589] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 592.927591] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 592.927594] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 592.927596] cfg80211: Disabling freq 2467 MHz [ 592.927598] cfg80211: Disabling freq 2472 MHz [ 592.927600] cfg80211: Disabling freq 2484 MHz [ 592.927602] cfg80211: Regulatory domain changed to country: US [ 592.927604] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 592.927607] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 592.927610] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 592.927613] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 592.927615] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 592.927618] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 592.927621] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 603.624278] wlan0: no IPv6 routers present [ 607.304214] ieee80211 phy0: wlan0: No probe response from AP 00:0e:83:28:76:c2 after 500ms, disconnecting. [ 607.312805] cfg80211: All devices are disconnected, going to restore regulatory settings [ 607.312818] cfg80211: Restoring regulatory settings [ 607.312826] cfg80211: Calling CRDA to update world regulatory domain [ 607.322729] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 607.322741] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 607.322748] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 607.322755] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 607.322762] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 607.322769] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 607.322776] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 607.322783] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 607.322790] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 607.322797] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 607.322804] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 607.322811] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 607.322817] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 607.322825] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 607.322831] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 607.322839] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 607.322845] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 607.322853] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 607.322859] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 607.322867] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 607.322873] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 607.322881] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 607.322887] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule: [ 607.322895] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 607.322901] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule: [ 607.322909] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 607.322915] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule: [ 607.322923] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 607.322930] cfg80211: World regulatory domain updated: [ 607.322935] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 607.322942] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 607.322950] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 607.322957] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 607.322964] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 607.322971] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 608.701757] wlan0: authenticate with 00:0e:83:28:76:c2 (try 1) [ 608.900087] wlan0: authenticate with 00:0e:83:28:76:c2 (try 2) [ 609.100074] wlan0: authenticate with 00:0e:83:28:76:c2 (try 3) [ 609.300083] wlan0: authentication with 00:0e:83:28:76:c2 timed out [ 611.338649] sky2 0000:09:00.0: eth0: Link is down [ 615.605142] wlan0: direct probe to 00:0e:84:2b:4b:62 (try 1/3) [ 615.804153] wlan0: direct probe to 00:0e:84:2b:4b:62 (try 2/3) [ 616.004110] wlan0: direct probe to 00:0e:84:2b:4b:62 (try 3/3) [ 616.204325] wlan0: direct probe to 00:0e:84:2b:4b:62 timed out [ 616.292875] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 618.928625] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 622.500621] wlan0: direct probe to 00:0e:83:28:76:c2 (try 1/3) [ 622.700113] wlan0: direct probe to 00:0e:83:28:76:c2 (try 2/3) [ 622.900361] wlan0: direct probe to 00:0e:83:28:76:c2 (try 3/3) [ 623.100073] wlan0: direct probe to 00:0e:83:28:76:c2 timed out [ 648.268794] wlan0: direct probe to 00:0e:83:28:76:c2 (try 1/3) [ 648.468231] wlan0: direct probe to 00:0e:83:28:76:c2 (try 2/3) [ 648.470709] wlan0: direct probe responded [ 648.473897] wlan0: authenticate with 00:0e:83:28:76:c2 (try 1) [ 648.477515] wlan0: authenticated [ 648.478688] wlan0: associate with 00:0e:83:28:76:c2 (try 1) [ 648.676207] wlan0: associate with 00:0e:83:28:76:c2 (try 2) [ 648.685947] wlan0: RX ReassocResp from 00:0e:83:28:76:c2 (capab=0x21 status=0 aid=22) [ 648.685957] wlan0: associated [ 648.693130] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 648.693205] cfg80211: Calling CRDA for country: US [ 648.698813] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 648.698817] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 648.698820] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 648.698823] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 648.698825] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 648.698828] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 648.698831] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 648.698834] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 648.698836] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 648.698839] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 648.698841] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 648.698844] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 648.698847] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 648.698850] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 648.698852] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 648.698855] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 648.698857] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 648.698860] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 648.698862] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 648.698866] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 648.698868] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 648.698871] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 648.698873] cfg80211: Disabling freq 2467 MHz [ 648.698875] cfg80211: Disabling freq 2472 MHz [ 648.698876] cfg80211: Disabling freq 2484 MHz [ 648.698879] cfg80211: Regulatory domain changed to country: US [ 648.698881] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 648.698884] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 648.698887] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 648.698889] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 648.698892] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 648.698895] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 648.698897] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 658.948282] wlan0: no IPv6 routers present [ 663.308185] ieee80211 phy0: wlan0: No probe response from AP 00:0e:83:28:76:c2 after 500ms, disconnecting. [ 663.311018] cfg80211: All devices are disconnected, going to restore regulatory settings [ 663.311030] cfg80211: Restoring regulatory settings [ 663.311039] cfg80211: Calling CRDA to update world regulatory domain [ 663.320897] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 663.320908] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 663.320915] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 663.320922] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 663.320929] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 663.320936] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 663.320942] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 663.320950] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 663.320956] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 663.320964] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 663.320970] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 663.320978] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 663.320984] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 663.320991] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 663.320997] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 663.321005] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 663.321011] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 663.321019] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 663.321025] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 663.321033] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 663.321039] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 663.321047] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 663.321053] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule: [ 663.321060] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 663.321067] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule: [ 663.321075] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 663.321081] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule: [ 663.321089] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 663.321096] cfg80211: World regulatory domain updated: [ 663.321101] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 663.321108] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 663.321115] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 663.321122] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 663.321129] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 663.321136] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 664.692795] wlan0: authenticate with 00:0e:83:28:76:c2 (try 1) [ 664.892075] wlan0: authenticate with 00:0e:83:28:76:c2 (try 2) [ 665.092274] wlan0: authenticate with 00:0e:83:28:76:c2 (try 3) [ 665.292297] wlan0: authentication with 00:0e:83:28:76:c2 timed out [ 671.601363] wlan0: authenticate with 00:0e:83:28:76:c2 (try 1) [ 671.800122] wlan0: authenticate with 00:0e:83:28:76:c2 (try 2) [ 671.802570] wlan0: authenticated [ 671.803945] wlan0: associate with 00:0e:83:28:76:c2 (try 1) [ 672.000143] wlan0: associate with 00:0e:83:28:76:c2 (try 2) [ 672.012712] wlan0: RX ReassocResp from 00:0e:83:28:76:c2 (capab=0x21 status=0 aid=22) [ 672.012722] wlan0: associated [ 672.021186] cfg80211: Calling CRDA for country: US [ 672.026977] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 672.026982] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 672.026984] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 672.026987] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 672.026989] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 672.026992] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 672.026995] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 672.026997] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 672.027000] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 672.027003] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 672.027005] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 672.027008] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 672.027010] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 672.027013] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 672.027015] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 672.027018] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 672.027021] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 672.027024] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 672.027026] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 672.027029] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 672.027031] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 672.027034] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 672.027036] cfg80211: Disabling freq 2467 MHz [ 672.027038] cfg80211: Disabling freq 2472 MHz [ 672.027040] cfg80211: Disabling freq 2484 MHz [ 672.027043] cfg80211: Regulatory domain changed to country: US [ 672.027045] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 672.027047] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 672.027050] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 672.027053] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 672.027055] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 672.027058] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 672.027061] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 678.308094] ieee80211 phy0: wlan0: No probe response from AP 00:0e:83:28:76:c2 after 500ms, disconnecting. [ 678.320588] cfg80211: All devices are disconnected, going to restore regulatory settings [ 678.320602] cfg80211: Restoring regulatory settings [ 678.320610] cfg80211: Calling CRDA to update world regulatory domain [ 678.330327] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 678.330338] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 678.330345] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 678.330353] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 678.330359] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 678.330367] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 678.330373] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 678.330380] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 678.330387] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 678.330394] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 678.330400] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 678.330408] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 678.330414] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 678.330422] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 678.330428] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 678.330435] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 678.330441] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 678.330449] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 678.330455] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 678.330462] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 678.330468] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 678.330476] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 678.330483] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule: [ 678.330490] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 678.330496] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule: [ 678.330504] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 678.330510] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule: [ 678.330518] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 678.330526] cfg80211: World regulatory domain updated: [ 678.330530] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 678.330538] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 678.330545] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 678.330552] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 678.330559] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 678.330566] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 679.708900] wlan0: authenticate with 00:0e:83:28:76:c2 (try 1) [ 679.710784] wlan0: authenticated [ 679.711984] wlan0: associate with 00:0e:83:28:76:c2 (try 1) [ 679.908182] wlan0: associate with 00:0e:83:28:76:c2 (try 2) [ 680.108191] wlan0: associate with 00:0e:83:28:76:c2 (try 3) [ 680.308271] wlan0: association with 00:0e:83:28:76:c2 timed out [ 686.612988] wlan0: authenticate with 00:0e:83:28:76:c2 (try 1) [ 686.812128] wlan0: authenticate with 00:0e:83:28:76:c2 (try 2) [ 687.012308] wlan0: authenticate with 00:0e:83:28:76:c2 (try 3) [ 687.212252] wlan0: authentication with 00:0e:83:28:76:c2 timed out [ 693.516880] wlan0: direct probe to 00:0e:83:28:76:c2 (try 1/3) [ 693.716102] wlan0: direct probe to 00:0e:83:28:76:c2 (try 2/3) [ 693.916191] wlan0: direct probe to 00:0e:83:28:76:c2 (try 3/3) [ 694.116225] wlan0: direct probe to 00:0e:83:28:76:c2 timed out [ 694.313076] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 700.420850] wlan0: direct probe to 00:0e:84:2b:4b:62 (try 1/3) [ 700.620257] wlan0: direct probe to 00:0e:84:2b:4b:62 (try 2/3) [ 700.820292] wlan0: direct probe to 00:0e:84:2b:4b:62 (try 3/3) [ 701.020075] wlan0: direct probe to 00:0e:84:2b:4b:62 timed out [ 709.029568] sky2 0000:09:00.0: eth0: Link is up at 10 Mbps, half duplex, flow control none [ 709.030201] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 719.776150] eth0: no IPv6 routers present [ 732.452526] wlan0: direct probe to 00:0e:83:28:76:c2 (try 1/3) [ 732.652076] wlan0: direct probe to 00:0e:83:28:76:c2 (try 2/3) [ 732.852051] wlan0: direct probe to 00:0e:83:28:76:c2 (try 3/3) [ 733.052041] wlan0: direct probe to 00:0e:83:28:76:c2 timed out [ 739.380633] wlan0: direct probe to 00:0e:83:28:76:c2 (try 1/3) [ 739.580050] wlan0: direct probe to 00:0e:83:28:76:c2 (try 2/3) [ 739.780133] wlan0: direct probe to 00:0e:83:28:76:c2 (try 3/3) [ 739.980034] wlan0: direct probe to 00:0e:83:28:76:c2 timed out [ 746.313373] wlan0: direct probe to 00:0e:83:28:76:c2 (try 1/3) [ 746.512152] wlan0: direct probe to 00:0e:83:28:76:c2 (try 2/3) [ 746.712085] wlan0: direct probe to 00:0e:83:28:76:c2 (try 3/3) [ 746.912051] wlan0: direct probe to 00:0e:83:28:76:c2 timed out [ 753.228630] wlan0: direct probe to 00:0e:83:28:76:c2 (try 1/3) [ 753.428086] wlan0: direct probe to 00:0e:83:28:76:c2 (try 2/3) [ 753.628084] wlan0: direct probe to 00:0e:83:28:76:c2 (try 3/3) [ 753.828111] wlan0: direct probe to 00:0e:83:28:76:c2 timed out [ 760.125805] wlan0: direct probe to 00:0e:83:28:76:c2 (try 1/3) [ 760.324039] wlan0: direct probe to 00:0e:83:28:76:c2 (try 2/3) [ 760.528048] wlan0: direct probe to 00:0e:83:28:76:c2 (try 3/3) [ 760.728035] wlan0: direct probe to 00:0e:83:28:76:c2 timed out [ 767.036567] wlan0: direct probe to 00:0e:83:28:76:c2 (try 1/3) [ 767.236077] wlan0: direct probe to 00:0e:83:28:76:c2 (try 2/3) [ 767.436147] wlan0: direct probe to 00:0e:83:28:76:c2 (try 3/3) [ 767.636172] wlan0: direct probe to 00:0e:83:28:76:c2 timed out