[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.4.0-34-generic (buildd@lgw01-20) (gcc version 5.3.1 20160413 (Ubuntu 5.3.1-14ubuntu2.1) ) #53-Ubuntu SMP Wed Jul 27 16:06:39 UTC 2016 (Ubuntu 4.4.0-34.53-generic 4.4.15) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-34-generic root=UUID=df989877-5f85-49ec-b989-a9fc6cf2d7b4 ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers' [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] x86/fpu: Using 'eager' FPU context switches. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009d073fff] usable [ 0.000000] BIOS-e820: [mem 0x000000009d074000-0x000000009d07afff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000009d07b000-0x000000009d4b0fff] usable [ 0.000000] BIOS-e820: [mem 0x000000009d4b1000-0x000000009d8b3fff] reserved [ 0.000000] BIOS-e820: [mem 0x000000009d8b4000-0x00000000acdcbfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000acdcc000-0x00000000ace63fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ace64000-0x00000000ad033fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000ad034000-0x00000000ad7b6fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000ad7b7000-0x00000000adffefff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000adfff000-0x00000000adffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000af000000-0x00000000cf1fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000012fdfffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: ASUSTeK COMPUTER INC. X450JB/X450JB, BIOS 202 03/13/2015 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x12fe00 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-E7FFF uncachable [ 0.000000] E8000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask 7F00000000 write-back [ 0.000000] 1 base 0100000000 mask 7FE0000000 write-back [ 0.000000] 2 base 0120000000 mask 7FF0000000 write-back [ 0.000000] 3 base 00C0000000 mask 7FC0000000 uncachable [ 0.000000] 4 base 00B0000000 mask 7FF0000000 uncachable [ 0.000000] 5 base 00AF000000 mask 7FFF000000 uncachable [ 0.000000] 6 base 012FE00000 mask 7FFFE00000 uncachable [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] original variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 4GB, type WB [ 0.000000] reg 1, base: 4GB, range: 512MB, type WB [ 0.000000] reg 2, base: 4608MB, range: 256MB, type WB [ 0.000000] reg 3, base: 3GB, range: 1GB, type UC [ 0.000000] reg 4, base: 2816MB, range: 256MB, type UC [ 0.000000] reg 5, base: 2800MB, range: 16MB, type UC [ 0.000000] reg 6, base: 4862MB, range: 2MB, type UC [ 0.000000] total RAM covered: 3566M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 32M num_reg: 7 lose cover RAM: 0G [ 0.000000] New variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2GB, range: 512MB, type WB [ 0.000000] reg 2, base: 2560MB, range: 256MB, type WB [ 0.000000] reg 3, base: 2800MB, range: 16MB, type UC [ 0.000000] reg 4, base: 4GB, range: 512MB, type WB [ 0.000000] reg 5, base: 4608MB, range: 256MB, type WB [ 0.000000] reg 6, base: 4862MB, range: 2MB, type UC [ 0.000000] e820: update [mem 0xaf000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xae000 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fd850-0x000fd85f] mapped at [ffff8800000fd850] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x02200000, 0x02200fff] PGTABLE [ 0.000000] BRK [0x02201000, 0x02201fff] PGTABLE [ 0.000000] BRK [0x02202000, 0x02202fff] PGTABLE [ 0.000000] BRK [0x02203000, 0x02203fff] PGTABLE [ 0.000000] BRK [0x02204000, 0x02204fff] PGTABLE [ 0.000000] BRK [0x02205000, 0x02205fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x33b6c000-0x35dadfff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F04A0 000024 (v02 _ASUS_) [ 0.000000] ACPI: XSDT 0x00000000AD13C098 0000AC (v01 _ASUS_ Notebook 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 0x00000000AD14CED0 00010C (v05 _ASUS_ Notebook 01072009 AMI 00010013) [ 0.000000] ACPI: DSDT 0x00000000AD13C1E0 010CED (v02 _ASUS_ Notebook 00000202 INTL 20120711) [ 0.000000] ACPI: FACS 0x00000000AD7AAF80 000040 [ 0.000000] ACPI: APIC 0x00000000AD14CFE0 000092 (v03 _ASUS_ Notebook 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 0x00000000AD14D078 000044 (v01 _ASUS_ Notebook 01072009 AMI 00010013) [ 0.000000] ACPI: SSDT 0x00000000AD14D0C0 000228 (v01 INTEL sensrhub 00000000 INTL 20120711) [ 0.000000] ACPI: SSDT 0x00000000AD14D2E8 00018F (v01 Intel zpodd 00001000 INTL 20120711) [ 0.000000] ACPI: SSDT 0x00000000AD14D478 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20120711) [ 0.000000] ACPI: SSDT 0x00000000AD14D9B8 000AD8 (v01 PmRef CpuPm 00003000 INTL 20120711) [ 0.000000] ACPI: MCFG 0x00000000AD14E490 00003C (v01 _ASUS_ Notebook 01072009 MSFT 00000097) [ 0.000000] ACPI: HPET 0x00000000AD14E4D0 000038 (v01 _ASUS_ Notebook 01072009 AMI. 00000005) [ 0.000000] ACPI: SSDT 0x00000000AD14E508 000315 (v01 SataRe SataTabl 00001000 INTL 20120711) [ 0.000000] ACPI: SSDT 0x00000000AD14E820 0037F0 (v01 SaSsdt SaSsdt 00003000 INTL 20091112) [ 0.000000] ACPI: SSDT 0x00000000AD152010 001500 (v01 SgRef SgPeg 00001000 INTL 20120711) [ 0.000000] ACPI: SSDT 0x00000000AD153510 000393 (v01 CppcTa CppcTabl 00001000 INTL 20120711) [ 0.000000] ACPI: PCCT 0x00000000AD1538A8 00006E (v05 PcctTa PcctTabl 00001000 INTL 20120711) [ 0.000000] ACPI: SSDT 0x00000000AD153918 000AC4 (v01 Cpc_Ta Cpc_Tabl 00001000 INTL 20120711) [ 0.000000] ACPI: DMAR 0x00000000AD1543E0 0000B8 (v01 INTEL HSW 00000001 INTL 00000001) [ 0.000000] ACPI: SSDT 0x00000000AD154498 00189C (v01 OptRef OptTabl 00001000 INTL 20120711) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000012fdfffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x12fdf5000-0x12fdf9fff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000012fdfffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000009d073fff] [ 0.000000] node 0: [mem 0x000000009d07b000-0x000000009d4b0fff] [ 0.000000] node 0: [mem 0x000000009d8b4000-0x00000000acdcbfff] [ 0.000000] node 0: [mem 0x00000000ace64000-0x00000000ad033fff] [ 0.000000] node 0: [mem 0x00000000adfff000-0x00000000adffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000012fdfffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000012fdfffff] [ 0.000000] On node 0 totalpages: 903471 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 10991 pages used for memmap [ 0.000000] DMA32 zone: 703379 pages, LIFO batch:31 [ 0.000000] Normal zone: 3064 pages used for memmap [ 0.000000] Normal zone: 196096 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics stolen memory at 0xaf200000-0xcf1fffff [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x9d074000-0x9d07afff] [ 0.000000] PM: Registered nosave memory: [mem 0x9d4b1000-0x9d8b3fff] [ 0.000000] PM: Registered nosave memory: [mem 0xacdcc000-0xace63fff] [ 0.000000] PM: Registered nosave memory: [mem 0xad034000-0xad7b6fff] [ 0.000000] PM: Registered nosave memory: [mem 0xad7b7000-0xadffefff] [ 0.000000] PM: Registered nosave memory: [mem 0xae000000-0xaeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xaf000000-0xcf1fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xcf200000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.000000] e820: [mem 0xcf200000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 33 pages/cpu @ffff88012fa00000 s98008 r8192 d28968 u262144 [ 0.000000] pcpu-alloc: s98008 r8192 d28968 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 889331 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-34-generic root=UUID=df989877-5f85-49ec-b989-a9fc6cf2d7b4 ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 3435516K/3613884K available (8394K kernel code, 1282K rwdata, 3944K rodata, 1480K init, 1292K bss, 178368K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8 [ 0.000000] NR_IRQS:16640 nr_irqs:488 16 [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2594.055 MHz processor [ 0.000021] Calibrating delay loop (skipped), value calculated using timer frequency.. 5188.11 BogoMIPS (lpj=10376220) [ 0.000023] pid_max: default: 32768 minimum: 301 [ 0.000027] ACPI: Core revision 20150930 [ 0.011963] ACPI: 11 ACPI AML tables successfully acquired and loaded [ 0.011977] Security Framework initialized [ 0.011979] Yama: becoming mindful. [ 0.011991] AppArmor: AppArmor initialized [ 0.012170] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.013036] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.013428] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.013431] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.013587] Initializing cgroup subsys io [ 0.013589] Initializing cgroup subsys memory [ 0.013593] Initializing cgroup subsys devices [ 0.013595] Initializing cgroup subsys freezer [ 0.013597] Initializing cgroup subsys net_cls [ 0.013598] Initializing cgroup subsys perf_event [ 0.013600] Initializing cgroup subsys net_prio [ 0.013601] Initializing cgroup subsys hugetlb [ 0.013603] Initializing cgroup subsys pids [ 0.013619] CPU: Physical Processor ID: 0 [ 0.013620] CPU: Processor Core ID: 0 [ 0.013623] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.013624] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.014360] mce: CPU supports 9 MCE banks [ 0.014371] CPU0: Thermal monitoring enabled (TM1) [ 0.014378] process: using mwait in idle threads [ 0.014381] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 [ 0.014381] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 [ 0.014639] Freeing SMP alternatives memory: 28K (ffffffff820b4000 - ffffffff820bb000) [ 0.015973] ftrace: allocating 31994 entries in 125 pages [ 0.025296] smpboot: Max logical packages: 2 [ 0.025297] smpboot: APIC(0) Converting physical 0 to logical package 0 [ 0.025301] DMAR: Host address width 39 [ 0.025302] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.025309] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a [ 0.025310] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.025312] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da [ 0.025313] DMAR: RMRR base: 0x000000ade67000 end: 0x000000ade75fff [ 0.025314] DMAR: RMRR base: 0x000000af000000 end: 0x000000cf1fffff [ 0.025315] DMAR-IR: IOAPIC id 8 under DRHD base 0xfed91000 IOMMU 1 [ 0.025316] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.025317] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 0.025573] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 0.025574] x2apic enabled [ 0.025578] Switched APIC routing to cluster x2apic. [ 0.025978] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.065666] TSC deadline timer enabled [ 0.065669] smpboot: CPU0: Intel(R) Core(TM) i7-4720HQ CPU @ 2.60GHz (family: 0x6, model: 0x3c, stepping: 0x3) [ 0.065681] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver. [ 0.065695] ... version: 3 [ 0.065696] ... bit width: 48 [ 0.065696] ... generic registers: 4 [ 0.065697] ... value mask: 0000ffffffffffff [ 0.065698] ... max period: 0000ffffffffffff [ 0.065698] ... fixed-purpose events: 3 [ 0.065699] ... event mask: 000000070000000f [ 0.066279] x86: Booting SMP configuration: [ 0.066281] .... node #0, CPUs: #1 [ 0.069836] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.069888] #2 #3 #4 #5 #6 #7 [ 0.088438] x86: Booted up 1 node, 8 CPUs [ 0.088441] smpboot: Total of 8 processors activated (41504.88 BogoMIPS) [ 0.094391] devtmpfs: initialized [ 0.096406] evm: security.selinux [ 0.096407] evm: security.SMACK64 [ 0.096408] evm: security.SMACK64EXEC [ 0.096408] evm: security.SMACK64TRANSMUTE [ 0.096409] evm: security.SMACK64MMAP [ 0.096409] evm: security.ima [ 0.096410] evm: security.capability [ 0.096453] PM: Registering ACPI NVS region [mem 0x9d074000-0x9d07afff] (28672 bytes) [ 0.096454] PM: Registering ACPI NVS region [mem 0xad034000-0xad7b6fff] (7876608 bytes) [ 0.096572] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.096639] pinctrl core: initialized pinctrl subsystem [ 0.096719] RTC time: 13:13:40, date: 08/26/16 [ 0.096798] NET: Registered protocol family 16 [ 0.106294] cpuidle: using governor ladder [ 0.122284] cpuidle: using governor menu [ 0.122290] Error parsing PCC subspaces from PCCT [ 0.122355] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.122356] ACPI: bus type PCI registered [ 0.122358] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.122423] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.122425] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.122433] PCI: Using configuration type 1 for base access [ 0.122461] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on [ 0.134600] ACPI: Added _OSI(Module Device) [ 0.134601] ACPI: Added _OSI(Processor Device) [ 0.134603] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.134604] ACPI: Added _OSI(Processor Aggregator Device) [ 0.137733] ACPI: Executed 2 blocks of module-level executable AML code [ 0.139933] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.140907] ACPI: Dynamic OEM Table Load: [ 0.140911] ACPI: SSDT 0xFFFF8800A8869400 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711) [ 0.141403] ACPI: Dynamic OEM Table Load: [ 0.141407] ACPI: SSDT 0xFFFF88012A932800 0005AA (v01 PmRef ApIst 00003000 INTL 20120711) [ 0.141922] ACPI: Dynamic OEM Table Load: [ 0.141924] ACPI: SSDT 0xFFFF8800A884DA00 000119 (v01 PmRef ApCst 00003000 INTL 20120711) [ 0.143055] ACPI : EC: EC started [ 0.179220] ACPI: Interpreter enabled [ 0.179227] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150930/hwxface-580) [ 0.179233] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580) [ 0.179248] ACPI: (supports S0 S3 S4 S5) [ 0.179249] ACPI: Using IOAPIC for interrupt routing [ 0.179269] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.183339] ACPI: Power Resource [PG00] (on) [ 0.186139] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.186143] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.186307] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME] [ 0.186397] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability] [ 0.186398] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.186645] PCI host bridge to bus 0000:00 [ 0.186647] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.186648] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.186650] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.186650] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] [ 0.186651] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] [ 0.186652] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 0.186653] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 0.186654] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] [ 0.186655] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] [ 0.186656] pci_bus 0000:00: root bus resource [mem 0xcf200000-0xfeafffff window] [ 0.186657] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.186662] pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000 [ 0.186721] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400 [ 0.186745] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.186798] pci 0000:00:01.0: System wakeup disabled by ACPI [ 0.186825] pci 0000:00:02.0: [8086:0416] type 00 class 0x030000 [ 0.186834] pci 0000:00:02.0: reg 0x10: [mem 0xf7400000-0xf77fffff 64bit] [ 0.186838] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.186841] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] [ 0.186893] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300 [ 0.186901] pci 0000:00:03.0: reg 0x10: [mem 0xf7a14000-0xf7a17fff 64bit] [ 0.186971] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 0.186993] pci 0000:00:14.0: reg 0x10: [mem 0xf7a00000-0xf7a0ffff 64bit] [ 0.187036] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.187062] pci 0000:00:14.0: System wakeup disabled by ACPI [ 0.187085] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 [ 0.187108] pci 0000:00:16.0: reg 0x10: [mem 0xf7a1e000-0xf7a1e00f 64bit] [ 0.187154] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.187208] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 0.187232] pci 0000:00:1a.0: reg 0x10: [mem 0xf7a1c000-0xf7a1c3ff] [ 0.187295] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.187330] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 0.187356] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300 [ 0.187378] pci 0000:00:1b.0: reg 0x10: [mem 0xf7a10000-0xf7a13fff 64bit] [ 0.187428] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.187471] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 0.187500] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 [ 0.187561] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.187620] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.187651] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400 [ 0.187712] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.187769] pci 0000:00:1c.2: System wakeup disabled by ACPI [ 0.187799] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400 [ 0.187859] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.187916] pci 0000:00:1c.3: System wakeup disabled by ACPI [ 0.187951] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 0.187977] pci 0000:00:1d.0: reg 0x10: [mem 0xf7a1b000-0xf7a1b3ff] [ 0.188047] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.188089] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.188120] pci 0000:00:1f.0: [8086:8c49] type 00 class 0x060100 [ 0.188269] pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601 [ 0.188289] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7] [ 0.188296] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3] [ 0.188303] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097] [ 0.188311] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083] [ 0.188318] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f] [ 0.188325] pci 0000:00:1f.2: reg 0x24: [mem 0xf7a1a000-0xf7a1a7ff] [ 0.188351] pci 0000:00:1f.2: PME# supported from D3hot [ 0.188407] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 0.188423] pci 0000:00:1f.3: reg 0x10: [mem 0xf7a19000-0xf7a190ff 64bit] [ 0.188442] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f] [ 0.188547] pci 0000:01:00.0: [10de:1347] type 00 class 0x030200 [ 0.188578] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff] [ 0.188594] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.188610] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref] [ 0.188620] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f] [ 0.188631] pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref] [ 0.188713] pci 0000:01:00.0: System wakeup disabled by ACPI [ 0.194336] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.194338] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.194340] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff] [ 0.194343] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref] [ 0.194401] acpiphp: Slot [1] registered [ 0.194407] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.194491] pci 0000:03:00.0: [168c:0036] type 00 class 0x028000 [ 0.194555] pci 0000:03:00.0: reg 0x10: [mem 0xf7900000-0xf797ffff 64bit] [ 0.194636] pci 0000:03:00.0: reg 0x30: [mem 0xf7980000-0xf798ffff pref] [ 0.194720] pci 0000:03:00.0: supports D1 D2 [ 0.194721] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.194771] pci 0000:03:00.0: System wakeup disabled by ACPI [ 0.202344] pci 0000:00:1c.2: PCI bridge to [bus 03] [ 0.202349] pci 0000:00:1c.2: bridge window [mem 0xf7900000-0xf79fffff] [ 0.202417] pci 0000:04:00.0: [1969:10a1] type 00 class 0x020000 [ 0.202465] pci 0000:04:00.0: reg 0x10: [mem 0xf7800000-0xf783ffff 64bit] [ 0.202477] pci 0000:04:00.0: reg 0x18: [io 0xd000-0xd07f] [ 0.202567] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.202599] pci 0000:04:00.0: System wakeup disabled by ACPI [ 0.210345] pci 0000:00:1c.3: PCI bridge to [bus 04] [ 0.210349] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff] [ 0.210352] pci 0000:00:1c.3: bridge window [mem 0xf7800000-0xf78fffff] [ 0.211035] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.211075] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.211114] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15) [ 0.211151] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.211188] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.211225] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.211261] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15) [ 0.211298] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 10 11 12 14 15) [ 0.211545] ACPI: Enabled 4 GPEs in block 00 to 3F [ 0.211576] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 0.211663] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 0.211664] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.211666] vgaarb: loaded [ 0.211667] vgaarb: bridge control possible 0000:00:02.0 [ 0.211824] SCSI subsystem initialized [ 0.211848] libata version 3.00 loaded. [ 0.211861] ACPI: bus type USB registered [ 0.211870] usbcore: registered new interface driver usbfs [ 0.211875] usbcore: registered new interface driver hub [ 0.211888] usbcore: registered new device driver usb [ 0.211974] PCI: Using ACPI for IRQ routing [ 0.213176] PCI: pci_cache_line_size set to 64 bytes [ 0.213220] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff] [ 0.213221] e820: reserve RAM buffer [mem 0x9d074000-0x9fffffff] [ 0.213222] e820: reserve RAM buffer [mem 0x9d4b1000-0x9fffffff] [ 0.213222] e820: reserve RAM buffer [mem 0xacdcc000-0xafffffff] [ 0.213223] e820: reserve RAM buffer [mem 0xad034000-0xafffffff] [ 0.213224] e820: reserve RAM buffer [mem 0xae000000-0xafffffff] [ 0.213225] e820: reserve RAM buffer [mem 0x12fe00000-0x12fffffff] [ 0.213290] NetLabel: Initializing [ 0.213291] NetLabel: domain hash size = 128 [ 0.213292] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.213299] NetLabel: unlabeled traffic allowed by default [ 0.213343] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.213346] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.215367] clocksource: Switched to clocksource hpet [ 0.219581] AppArmor: AppArmor Filesystem Enabled [ 0.219620] pnp: PnP ACPI init [ 0.219685] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.219688] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.219807] system 00:01: [io 0x0680-0x069f] has been reserved [ 0.219809] system 00:01: [io 0xffff] has been reserved [ 0.219810] system 00:01: [io 0xffff] has been reserved [ 0.219812] system 00:01: [io 0xffff] has been reserved [ 0.219813] system 00:01: [io 0x1c00-0x1cfe] has been reserved [ 0.219814] system 00:01: [io 0x1d00-0x1dfe] has been reserved [ 0.219815] system 00:01: [io 0x1e00-0x1efe] has been reserved [ 0.219817] system 00:01: [io 0x1f00-0x1ffe] has been reserved [ 0.219818] system 00:01: [io 0x1800-0x18fe] could not be reserved [ 0.219819] system 00:01: [io 0x164e-0x164f] has been reserved [ 0.219821] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.219837] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.219868] system 00:03: [io 0x1854-0x1857] has been reserved [ 0.219870] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.219900] system 00:04: [io 0x04d0-0x04d1] has been reserved [ 0.219902] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.219941] pnp 00:05: Plug and Play ACPI device, IDs ATK3001 PNP0303 (active) [ 0.219968] pnp 00:06: Plug and Play ACPI device, IDs FLT0102 SYN0300 SYN0302 SYN0002 PNP0f13 PNP0f03 (active) [ 0.220262] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.220264] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.220265] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.220266] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.220267] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.220269] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.220270] system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.220271] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.220273] system 00:07: [mem 0xff000000-0xffffffff] has been reserved [ 0.220274] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.220275] system 00:07: [mem 0xf7fdf000-0xf7fdffff] has been reserved [ 0.220277] system 00:07: [mem 0xf7fe0000-0xf7feffff] has been reserved [ 0.220278] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.220457] pnp: PnP ACPI: found 8 devices [ 0.226220] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.226234] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000 [ 0.226236] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000 [ 0.226238] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000 [ 0.226252] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000 [ 0.226253] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000 [ 0.226254] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 0.226255] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 0.226257] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000 [ 0.226258] pci 0000:00:1c.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000 [ 0.226261] pci 0000:00:1c.0: BAR 14: assigned [mem 0xcf200000-0xcf3fffff] [ 0.226265] pci 0000:00:1c.0: BAR 15: assigned [mem 0xcf400000-0xcf5fffff 64bit pref] [ 0.226267] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff] [ 0.226269] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.226270] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.226272] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff] [ 0.226274] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref] [ 0.226277] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.226279] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.226283] pci 0000:00:1c.0: bridge window [mem 0xcf200000-0xcf3fffff] [ 0.226286] pci 0000:00:1c.0: bridge window [mem 0xcf400000-0xcf5fffff 64bit pref] [ 0.226291] pci 0000:00:1c.2: PCI bridge to [bus 03] [ 0.226295] pci 0000:00:1c.2: bridge window [mem 0xf7900000-0xf79fffff] [ 0.226301] pci 0000:00:1c.3: PCI bridge to [bus 04] [ 0.226303] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff] [ 0.226307] pci 0000:00:1c.3: bridge window [mem 0xf7800000-0xf78fffff] [ 0.226314] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.226315] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.226316] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.226317] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window] [ 0.226318] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window] [ 0.226319] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window] [ 0.226320] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window] [ 0.226321] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window] [ 0.226322] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window] [ 0.226323] pci_bus 0000:00: resource 13 [mem 0xcf200000-0xfeafffff window] [ 0.226324] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.226324] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff] [ 0.226325] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref] [ 0.226326] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] [ 0.226327] pci_bus 0000:02: resource 1 [mem 0xcf200000-0xcf3fffff] [ 0.226328] pci_bus 0000:02: resource 2 [mem 0xcf400000-0xcf5fffff 64bit pref] [ 0.226329] pci_bus 0000:03: resource 1 [mem 0xf7900000-0xf79fffff] [ 0.226330] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff] [ 0.226331] pci_bus 0000:04: resource 1 [mem 0xf7800000-0xf78fffff] [ 0.226351] NET: Registered protocol family 2 [ 0.226455] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.226514] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.226605] TCP: Hash tables configured (established 32768 bind 32768) [ 0.226625] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.226639] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.226683] NET: Registered protocol family 1 [ 0.226693] pci 0000:00:02.0: Video device with shadowed ROM [ 0.227014] pci 0000:04:00.0: set MSI_INTX_DISABLE_BUG flag [ 0.227017] PCI: CLS 64 bytes, default 64 [ 0.227046] Trying to unpack rootfs image as initramfs... [ 0.589631] Freeing initrd memory: 35080K (ffff880033b6c000 - ffff880035dae000) [ 0.589690] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.589692] software IO TLB [mem 0xa8dcc000-0xacdcc000] (64MB) mapped at [ffff8800a8dcc000-ffff8800acdcbfff] [ 0.589745] RAPL PMU detected, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer [ 0.589746] hw unit of domain pp0-core 2^-14 Joules [ 0.589747] hw unit of domain package 2^-14 Joules [ 0.589748] hw unit of domain dram 2^-14 Joules [ 0.589748] hw unit of domain pp1-gpu 2^-14 Joules [ 0.589832] Scanning for low memory corruption every 60 seconds [ 0.590086] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.590120] audit: initializing netlink subsys (disabled) [ 0.590134] audit: type=2000 audit(1472217220.584:1): initialized [ 0.590415] Initialise system trusted keyring [ 0.590514] HugeTLB registered 1 GB page size, pre-allocated 0 pages [ 0.590515] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.591716] zbud: loaded [ 0.591869] VFS: Disk quotas dquot_6.6.0 [ 0.591892] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.592073] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.592243] fuse init (API version 7.23) [ 0.592343] Key type big_key registered [ 0.592361] Allocating IMA MOK and blacklist keyrings. [ 0.592726] Key type asymmetric registered [ 0.592729] Asymmetric key parser 'x509' registered [ 0.592750] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 0.592779] io scheduler noop registered [ 0.592780] io scheduler deadline registered (default) [ 0.592798] io scheduler cfq registered [ 0.593196] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.593200] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.593220] vesafb: mode is 1366x768x32, linelength=5504, pages=0 [ 0.593220] vesafb: scrolling: redraw [ 0.593222] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.593231] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90000800000, using 4160k, total 4160k [ 0.593291] Console: switching to colour frame buffer device 170x48 [ 0.593300] fb0: VESA VGA frame buffer device [ 0.593310] intel_idle: MWAIT substates: 0x42120 [ 0.593311] intel_idle: v0.4.1 model 0x3C [ 0.593312] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.593583] ACPI: AC Adapter [ADP1] (on-line) [ 0.593640] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 0.593668] ACPI: Lid Switch [LID0] [ 0.593690] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 0.593692] ACPI: Sleep Button [SLPB] [ 0.593712] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 [ 0.593714] ACPI: Power Button [PWRB] [ 0.593734] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 0.593735] ACPI: Power Button [PWRF] [ 0.595164] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.595166] ACPI: Thermal Zone [TZ00] (50 C) [ 0.595337] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.595338] ACPI: Thermal Zone [TZ01] (28 C) [ 0.595391] GHES: HEST is not enabled! [ 0.595509] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.596601] ACPI: Battery Slot [BAT0] (battery present) [ 0.597310] Linux agpgart interface v0.103 [ 0.599583] brd: module loaded [ 0.600524] loop: module loaded [ 0.600668] libphy: Fixed MDIO Bus: probed [ 0.600669] tun: Universal TUN/TAP device driver, 1.6 [ 0.600670] tun: (C) 1999-2004 Max Krasnyansky [ 0.600693] PPP generic driver version 2.4.2 [ 0.600727] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.600730] ehci-pci: EHCI PCI platform driver [ 0.600800] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.600804] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.600814] ehci-pci 0000:00:1a.0: debug port 2 [ 0.604717] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 0.604729] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7a1c000 [ 0.619395] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.619429] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.619431] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.619432] usb usb1: Product: EHCI Host Controller [ 0.619433] usb usb1: Manufacturer: Linux 4.4.0-34-generic ehci_hcd [ 0.619434] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.619540] hub 1-0:1.0: USB hub found [ 0.619544] hub 1-0:1.0: 2 ports detected [ 0.619720] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.619724] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.619734] ehci-pci 0000:00:1d.0: debug port 2 [ 0.623636] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 0.623655] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7a1b000 [ 0.635399] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.635428] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.635430] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.635431] usb usb2: Product: EHCI Host Controller [ 0.635432] usb usb2: Manufacturer: Linux 4.4.0-34-generic ehci_hcd [ 0.635433] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.635532] hub 2-0:1.0: USB hub found [ 0.635535] hub 2-0:1.0: 2 ports detected [ 0.635625] ehci-platform: EHCI generic platform driver [ 0.635634] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.635637] ohci-pci: OHCI PCI platform driver [ 0.635644] ohci-platform: OHCI generic platform driver [ 0.635650] uhci_hcd: USB Universal Host Controller Interface driver [ 0.635734] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.635739] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.636818] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810 [ 0.636822] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 0.636887] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.636888] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.636889] usb usb3: Product: xHCI Host Controller [ 0.636891] usb usb3: Manufacturer: Linux 4.4.0-34-generic xhci-hcd [ 0.636892] usb usb3: SerialNumber: 0000:00:14.0 [ 0.636989] hub 3-0:1.0: USB hub found [ 0.637005] hub 3-0:1.0: 14 ports detected [ 0.639437] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.639439] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.639464] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 0.639464] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.639465] usb usb4: Product: xHCI Host Controller [ 0.639466] usb usb4: Manufacturer: Linux 4.4.0-34-generic xhci-hcd [ 0.639467] usb usb4: SerialNumber: 0000:00:14.0 [ 0.639554] hub 4-0:1.0: USB hub found [ 0.639563] hub 4-0:1.0: 4 ports detected [ 0.640073] i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 0.652747] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.652749] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.652880] mousedev: PS/2 mouse device common for all mice [ 0.653173] rtc_cmos 00:02: RTC can wake from S4 [ 0.653286] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 0.653310] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.653315] i2c /dev entries driver [ 0.653347] device-mapper: uevent: version 1.0.3 [ 0.653389] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com [ 0.653400] Intel P-state driver initializing. [ 0.653627] ledtrig-cpu: registered to indicate activity on CPUs [ 0.654608] NET: Registered protocol family 10 [ 0.655051] NET: Registered protocol family 17 [ 0.655092] Key type dns_resolver registered [ 0.655892] microcode: CPU0 sig=0x306c3, pf=0x20, revision=0x17 [ 0.655939] microcode: CPU1 sig=0x306c3, pf=0x20, revision=0x17 [ 0.655990] microcode: CPU2 sig=0x306c3, pf=0x20, revision=0x17 [ 0.656005] microcode: CPU3 sig=0x306c3, pf=0x20, revision=0x17 [ 0.656052] microcode: CPU4 sig=0x306c3, pf=0x20, revision=0x17 [ 0.656099] microcode: CPU5 sig=0x306c3, pf=0x20, revision=0x17 [ 0.656145] microcode: CPU6 sig=0x306c3, pf=0x20, revision=0x17 [ 0.656169] microcode: CPU7 sig=0x306c3, pf=0x20, revision=0x17 [ 0.656339] microcode: Microcode Update Driver: v2.01 , Peter Oruba [ 0.657075] registered taskstats version 1 [ 0.657141] Loading compiled-in X.509 certificates [ 0.659420] Loaded X.509 cert 'Build time autogenerated kernel key: c40ffa48d8617ce4553ee3ab59017c95e74f2501' [ 0.659439] zswap: loaded using pool lzo/zbud [ 0.661497] Key type trusted registered [ 0.665047] Key type encrypted registered [ 0.665064] AppArmor: AppArmor sha1 policy hashing enabled [ 0.665068] ima: No TPM chip found, activating TPM-bypass! [ 0.665086] evm: HMAC attrs: 0x1 [ 0.665567] Magic number: 12:512:231 [ 0.665611] acpi device:4b: hash matches [ 0.665690] rtc_cmos 00:02: setting system clock to 2016-08-26 13:13:40 UTC (1472217220) [ 0.665763] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.665765] EDD information not available. [ 0.665833] PM: Hibernation image not present or could not be loaded. [ 0.666751] Freeing unused kernel memory: 1480K (ffffffff81f42000 - ffffffff820b4000) [ 0.666752] Write protecting the kernel read-only data: 14336k [ 0.667114] Freeing unused kernel memory: 1832K (ffff880001836000 - ffff880001a00000) [ 0.667424] Freeing unused kernel memory: 152K (ffff880001dda000 - ffff880001e00000) [ 0.668365] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 0.674708] random: systemd-udevd urandom read with 9 bits of entropy available [ 0.690946] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED [ 0.694777] wmi: Mapper loaded [ 0.716804] [drm] Initialized drm 1.1.0 20060810 [ 0.720401] ahci 0000:00:1f.2: version 3.0 [ 0.720568] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x24 impl SATA mode [ 0.720571] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst [ 0.727713] alx 0000:04:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [1c:87:2c:e1:23:0e] [ 0.728343] scsi host0: ahci [ 0.730045] scsi host1: ahci [ 0.731465] scsi host2: ahci [ 0.731582] scsi host3: ahci [ 0.735585] scsi host4: ahci [ 0.735703] scsi host5: ahci [ 0.735757] ata1: DUMMY [ 0.735759] ata2: DUMMY [ 0.735767] ata3: SATA max UDMA/133 abar m2048@0xf7a1a000 port 0xf7a1a200 irq 28 [ 0.735769] ata4: DUMMY [ 0.735770] ata5: DUMMY [ 0.735777] ata6: SATA max UDMA/133 abar m2048@0xf7a1a000 port 0xf7a1a380 irq 28 [ 0.744390] MXM: GUID detected in BIOS [ 0.744481] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95) [ 0.744542] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95) [ 0.744794] [drm] Memory usable by graphics device = 2048M [ 0.744798] checking generic (d0000000 410000) vs hw (d0000000 10000000) [ 0.744800] fb: switching to inteldrmfb from VESA VGA [ 0.744822] pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power, hda bios codec supported [ 0.744824] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEG0.PEGP handle [ 0.744847] Console: switching to colour dummy device 80x25 [ 0.744943] nouveau 0000:01:00.0: unknown chipset (118070a2) [ 0.744947] [drm] Replacing VGA console driver [ 0.744949] nouveau: probe of 0000:01:00.0 failed with error -12 [ 0.751305] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 0.751308] [drm] Driver supports precise vblank timestamp query. [ 0.751907] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 0.764119] alx 0000:04:00.0 enp4s0: renamed from eth0 [ 0.810434] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS [ 0.811914] ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no) [ 0.811918] ACPI Error: [\_SB_.PCI0.GFX0.DD02._BCL] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359) [ 0.811921] ACPI Error: Method parse/execution failed [\_SB.PCI0.PEG0.PEGP.DD02._BCL] (Node ffff88012b8fa1b8), AE_NOT_FOUND (20150930/psparse-542) [ 0.812024] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:4d/LNXVIDEO:00/input/input7 [ 0.813679] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 0.813811] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input8 [ 0.813882] [drm] Initialized i915 1.6.0 20151010 for 0000:00:02.0 on minor 0 [ 0.931429] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 0.947423] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 0.947544] fbcon: inteldrmfb (fb0) is primary device [ 0.947609] Console: switching to colour frame buffer device 170x48 [ 0.947632] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 0.955411] usb 3-4: new high-speed USB device number 2 using xhci_hcd [ 1.005675] input: FocalTechPS/2 FocalTech FocalTech Touchpad as /devices/platform/i8042/serio1/input/input6 [ 1.055433] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.058526] ata3.00: ATAPI: MATSHITA DVD-RAM UJ8HC, 1.00, max UDMA/100 [ 1.061018] ata3.00: configured for UDMA/100 [ 1.063838] usb 1-1: New USB device found, idVendor=8087, idProduct=8008 [ 1.063841] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.064067] hub 1-1:1.0: USB hub found [ 1.064259] hub 1-1:1.0: 6 ports detected [ 1.067236] scsi 2:0:0:0: CD-ROM MATSHITA DVD-RAM UJ8HC 1.00 PQ: 0 ANSI: 5 [ 1.067379] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.068714] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1.068717] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1.068719] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1.079840] usb 2-1: New USB device found, idVendor=8087, idProduct=8000 [ 1.079843] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.080055] hub 2-1:1.0: USB hub found [ 1.080155] hub 2-1:1.0: 8 ports detected [ 1.093233] ata6.00: ATA-8: TOSHIBA MQ01ABD100, AX0R2J, max UDMA/100 [ 1.093236] ata6.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.094843] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1.094847] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1.094850] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1.095052] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.095054] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.095222] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 1.095295] sr 2:0:0:0: Attached scsi generic sg0 type 5 [ 1.096207] ata6.00: configured for UDMA/100 [ 1.096441] scsi 5:0:0:0: Direct-Access ATA TOSHIBA MQ01ABD1 2J PQ: 0 ANSI: 5 [ 1.096699] sd 5:0:0:0: Attached scsi generic sg1 type 0 [ 1.096731] sd 5:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.096733] sd 5:0:0:0: [sda] 4096-byte physical blocks [ 1.096908] sd 5:0:0:0: [sda] Write Protect is off [ 1.096911] sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.097001] sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.100277] usb 3-4: New USB device found, idVendor=05e3, idProduct=0745 [ 1.100280] usb 3-4: New USB device strings: Mfr=0, Product=1, SerialNumber=2 [ 1.100282] usb 3-4: Product: USB Storage [ 1.100283] usb 3-4: SerialNumber: 000000000931 [ 1.104726] usb-storage 3-4:1.0: USB Mass Storage device detected [ 1.104809] scsi host6: usb-storage 3-4:1.0 [ 1.104851] usbcore: registered new interface driver usb-storage [ 1.105727] usbcore: registered new interface driver uas [ 1.267426] usb 3-9: new high-speed USB device number 3 using xhci_hcd [ 1.267429] sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 > [ 1.268299] sd 5:0:0:0: [sda] Attached SCSI disk [ 1.429355] usb 3-9: New USB device found, idVendor=04f2, idProduct=b3d8 [ 1.429359] usb 3-9: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 1.429360] usb 3-9: Product: USB2.0 HD UVC WebCam [ 1.429362] usb 3-9: Manufacturer: Chicony Electronics Co.,Ltd. [ 1.429363] usb 3-9: SerialNumber: 0x0001 [ 1.587405] tsc: Refined TSC clocksource calibration: 2593.991 MHz [ 1.587409] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x25640fc6114, max_idle_ns: 440795275253 ns [ 1.595406] usb 3-10: new full-speed USB device number 4 using xhci_hcd [ 1.724454] usb 3-10: New USB device found, idVendor=13d3, idProduct=3408 [ 1.724457] usb 3-10: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.104871] scsi 6:0:0:0: Direct-Access Generic STORAGE DEVICE 0931 PQ: 0 ANSI: 6 [ 2.105297] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 2.410574] sd 6:0:0:0: [sdb] 31116288 512-byte logical blocks: (15.9 GB/14.8 GiB) [ 2.411632] sd 6:0:0:0: [sdb] Write Protect is off [ 2.411635] sd 6:0:0:0: [sdb] Mode Sense: 21 00 00 00 [ 2.412664] sd 6:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 2.417618] sdb: sdb1 [ 2.421137] sd 6:0:0:0: [sdb] Attached SCSI removable disk [ 2.485603] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null) [ 2.587520] clocksource: Switched to clocksource tsc [ 2.599419] random: nonblocking pool is initialized [ 3.609662] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN) [ 3.609805] systemd[1]: Detected architecture x86-64. [ 3.618515] systemd[1]: Set hostname to . [ 5.014007] systemd[1]: Listening on Syslog Socket. [ 5.014099] systemd[1]: Listening on Journal Audit Socket. [ 5.014107] systemd[1]: Reached target Encrypted Volumes. [ 5.014200] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 5.014228] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 5.014244] systemd[1]: Listening on fsck to fsckd communication Socket. [ 5.014269] systemd[1]: Listening on Journal Socket. [ 5.014341] systemd[1]: Created slice User and Session Slice. [ 5.014350] systemd[1]: Reached target User and Group Name Lookups. [ 5.014359] systemd[1]: Reached target Remote File Systems (Pre). [ 5.014365] systemd[1]: Reached target Remote File Systems. [ 5.014391] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 5.014415] systemd[1]: Listening on udev Control Socket. [ 5.014432] systemd[1]: Listening on Journal Socket (/dev/log). [ 5.014482] systemd[1]: Created slice System Slice. [ 5.023442] systemd[1]: Mounting Huge Pages File System... [ 5.023993] systemd[1]: Starting Journal Service... [ 5.024313] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 5.024654] systemd[1]: Starting Set console keymap... [ 5.024678] systemd[1]: Reached target Slices. [ 5.024988] systemd[1]: Started Read required files in advance. [ 5.025372] systemd[1]: Mounting Debug File System... [ 5.163370] systemd[1]: Starting Load Kernel Modules... [ 5.163693] systemd[1]: Mounting POSIX Message Queue File System... [ 5.163768] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 5.555607] systemd[1]: Listening on udev Kernel Socket. [ 5.571411] systemd[1]: Started Braille Device Support. [ 5.571898] systemd[1]: Starting Uncomplicated firewall... [ 5.572744] systemd[1]: Mounted Huge Pages File System. [ 5.572758] systemd[1]: Mounted POSIX Message Queue File System. [ 5.572764] systemd[1]: Mounted Debug File System. [ 5.572895] systemd[1]: Started Create list of required static device nodes for the current kernel. [ 5.586105] systemd[1]: Starting Create Static Device Nodes in /dev... [ 5.776953] systemd[1]: Started Uncomplicated firewall. [ 5.862861] systemd[1]: Started Journal Service. [ 6.141511] lp: driver loaded but no devices found [ 6.156469] ppdev: user-space parallel port driver [ 7.921282] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro [ 8.105793] systemd-journald[939]: Received request to flush runtime journal from PID 1 [ 8.387512] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 8.665102] EDAC MC: Ver: 3.0.0 [ 8.695210] EDAC ie31200: No ECC support [ 9.008113] AVX2 version of gcm_enc/dec engaged. [ 9.008116] AES CTR mode by8 optimization enabled [ 9.058462] Bluetooth: Core ver 2.21 [ 9.058473] NET: Registered protocol family 31 [ 9.058474] Bluetooth: HCI device and connection manager initialized [ 9.058476] Bluetooth: HCI socket layer initialized [ 9.058477] Bluetooth: L2CAP socket layer initialized [ 9.058481] Bluetooth: SCO socket layer initialized [ 9.264414] usbcore: registered new interface driver btusb [ 9.528647] asus_wmi: ASUS WMI generic driver loaded [ 9.631181] asus_wmi: Initialization: 0x1 [ 9.631220] asus_wmi: BIOS WMI version: 8.1 [ 9.631246] asus_wmi: SFUN value: 0x4a0875 [ 9.631692] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input9 [ 9.632059] asus_wmi: Number of fans: 0 [ 9.873725] media: Linux media interface: v0.10 [ 10.030886] ath: phy0: WB335 2-ANT card detected [ 10.030888] ath: phy0: Set BT/WLAN RX diversity capability [ 10.039616] ath: phy0: Enable LNA combining [ 10.040881] ath: phy0: ASPM enabled: 0x43 [ 10.040882] ath: EEPROM regdomain: 0x6a [ 10.040883] ath: EEPROM indicates we should expect a direct regpair map [ 10.040884] ath: Country alpha2 being used: 00 [ 10.040885] ath: Regpair used: 0x6a [ 10.055968] usb 3-10: USB disconnect, device number 4 [ 10.056078] usbcore: registered new interface driver ath3k [ 10.061155] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 10.061355] ieee80211 phy0: Atheros AR9565 Rev:1 mem=0xffffc90000a00000, irq=18 [ 10.100118] Linux video capture interface: v2.00 [ 10.170230] ath9k 0000:03:00.0 wlp3s0: renamed from wlan0 [ 10.331156] usb 3-10: new full-speed USB device number 5 using xhci_hcd [ 10.460067] usb 3-10: New USB device found, idVendor=13d3, idProduct=3408 [ 10.460070] usb 3-10: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 10.515009] intel_rapl: Found RAPL domain package [ 10.515012] intel_rapl: Found RAPL domain core [ 10.515014] intel_rapl: Found RAPL domain uncore [ 10.515016] intel_rapl: Found RAPL domain dram [ 10.515019] intel_rapl: RAPL package 0 domain package locked by BIOS [ 10.515023] intel_rapl: RAPL package 0 domain dram locked by BIOS [ 10.567924] cfg80211: World regulatory domain updated: [ 10.567927] cfg80211: DFS Master region: unset [ 10.567928] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 10.567930] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 10.567931] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 10.567933] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 10.567934] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 10.567935] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 10.567937] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 10.567938] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 10.567939] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 10.578506] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 10.824409] uvcvideo: Found UVC 1.00 device USB2.0 HD UVC WebCam (04f2:b3d8) [ 10.825518] input: USB2.0 HD UVC WebCam as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9:1.0/input/input10 [ 10.825556] usbcore: registered new interface driver uvcvideo [ 10.825557] USB Video Class driver (1.1.1) [ 10.903588] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 10.903590] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 10.903591] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0) [ 10.903592] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 10.903593] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 10.903594] snd_hda_codec_realtek hdaudioC1D0: Mic=0x18 [ 10.903595] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12 [ 10.910544] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11 [ 10.910598] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12 [ 10.947134] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13 [ 10.947197] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14 [ 10.947253] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15 [ 11.573185] Adding 8764412k swap on /dev/sda9. Priority:-1 extents:1 across:8764412k FS [ 12.308728] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null) [ 15.344054] audit: type=1400 audit(1472217235.177:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=2551 comm="apparmor_parser" [ 15.351253] audit: type=1400 audit(1472217235.181:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=2548 comm="apparmor_parser" [ 15.378286] audit: type=1400 audit(1472217235.205:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=2553 comm="apparmor_parser" [ 15.416842] audit: type=1400 audit(1472217235.245:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=2544 comm="apparmor_parser" [ 15.416847] audit: type=1400 audit(1472217235.245:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=2544 comm="apparmor_parser" [ 15.416850] audit: type=1400 audit(1472217235.245:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=2544 comm="apparmor_parser" [ 15.416854] audit: type=1400 audit(1472217235.245:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=2544 comm="apparmor_parser" [ 15.418742] audit: type=1400 audit(1472217235.245:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=2549 comm="apparmor_parser" [ 15.428683] audit: type=1400 audit(1472217235.257:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2550 comm="apparmor_parser" [ 15.428690] audit: type=1400 audit(1472217235.257:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=2550 comm="apparmor_parser" [ 19.544809] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 19.544811] Bluetooth: BNEP filters: protocol multicast [ 19.544814] Bluetooth: BNEP socket layer initialized [ 23.739665] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 23.752328] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 23.758352] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready [ 23.761726] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready [ 24.407296] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 41.682361] Bluetooth: RFCOMM TTY layer initialized [ 41.682372] Bluetooth: RFCOMM socket layer initialized [ 41.682378] Bluetooth: RFCOMM ver 1.11 [ 46.382764] wlp3s0: authenticate with f0:29:29:2a:08:d0 [ 46.401058] wlp3s0: send auth to f0:29:29:2a:08:d0 (try 1/3) [ 46.417000] wlp3s0: authenticated [ 46.418256] wlp3s0: associate with f0:29:29:2a:08:d0 (try 1/3) [ 46.428246] wlp3s0: RX AssocResp from f0:29:29:2a:08:d0 (capab=0x431 status=0 aid=89) [ 46.428345] wlp3s0: associated [ 46.428352] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [ 46.440590] ath: EEPROM regdomain: 0x833a [ 46.440592] ath: EEPROM indicates we should expect a country code [ 46.440592] ath: doing EEPROM country->regdmn map search [ 46.440593] ath: country maps to regdmn code: 0x37 [ 46.440594] ath: Country alpha2 being used: GB [ 46.440594] ath: Regpair used: 0x37 [ 46.440595] ath: regdomain 0x833a dynamically updated by country IE [ 46.440614] cfg80211: Regulatory domain changed to country: GB [ 46.440615] cfg80211: DFS Master region: ETSI [ 46.440616] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 46.440617] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 46.440618] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 46.440619] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 46.440620] cfg80211: (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700 mBm), (0 s) [ 46.440621] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) [ 46.503550] wlp3s0: Limiting TX power to 18 dBm as advertised by f0:29:29:2a:08:d0 [ 56.641719] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 3758.409383] wlp3s0: AP f0:29:29:2a:08:d0 changed bandwidth, new config is 2437 MHz, width 0 (2437/0 MHz) [ 3758.409386] wlp3s0: AP f0:29:29:2a:08:d0 changed bandwidth in a way we can't support - disconnect [ 3758.850654] wlp3s0: authenticate with f0:29:29:2a:0c:40 [ 3758.863355] wlp3s0: send auth to f0:29:29:2a:0c:40 (try 1/3) [ 3758.866841] wlp3s0: authenticated [ 3758.867415] wlp3s0: associate with f0:29:29:2a:0c:40 (try 1/3) [ 3758.875056] wlp3s0: RX AssocResp from f0:29:29:2a:0c:40 (capab=0x431 status=0 aid=30) [ 3758.875135] wlp3s0: associated [ 3758.902566] wlp3s0: Limiting TX power to 18 dBm as advertised by f0:29:29:2a:0c:40 [ 3759.653874] cfg80211: World regulatory domain updated: [ 3759.653877] cfg80211: DFS Master region: unset [ 3759.653878] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 3759.653880] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 3759.653882] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 3759.653883] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 3759.653884] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 3759.653886] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 3759.653887] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 3759.653888] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 3759.653889] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 3759.846357] ath: EEPROM regdomain: 0x833a [ 3759.846359] ath: EEPROM indicates we should expect a country code [ 3759.846360] ath: doing EEPROM country->regdmn map search [ 3759.846361] ath: country maps to regdmn code: 0x37 [ 3759.846362] ath: Country alpha2 being used: GB [ 3759.846362] ath: Regpair used: 0x37 [ 3759.846363] ath: regdomain 0x833a dynamically updated by country IE [ 3759.846383] cfg80211: Regulatory domain changed to country: GB [ 3759.846384] cfg80211: DFS Master region: ETSI [ 3759.846384] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 3759.846386] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 3759.846387] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 3759.846388] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 3759.846389] cfg80211: (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700 mBm), (0 s) [ 3759.846390] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) [15465.429089] wlp3s0: deauthenticating from f0:29:29:2a:0c:40 by local choice (Reason: 3=DEAUTH_LEAVING) [15466.365598] cfg80211: World regulatory domain updated: [15466.365600] cfg80211: DFS Master region: unset [15466.365601] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [15466.365603] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [15466.365604] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [15466.365604] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [15466.365605] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [15466.365606] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [15466.365607] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [15466.365608] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [15466.365609] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [15468.350024] PM: Syncing filesystems ... done. [15468.897482] PM: Preparing system for sleep (mem) [15468.897633] Freezing user space processes ... (elapsed 0.200 seconds) done. [15469.098507] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [15469.099838] PM: Suspending system (mem) [15469.099861] Suspending console(s) (use no_console_suspend to debug) [15469.100073] sd 5:0:0:0: [sda] Synchronizing SCSI cache [15469.263466] sd 5:0:0:0: [sda] Stopping disk [15469.760995] PM: suspend of devices complete after 661.011 msecs [15469.778575] PM: late suspend of devices complete after 17.575 msecs [15469.779491] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [15469.779725] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [15469.779887] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [15469.792945] PM: noirq suspend of devices complete after 14.367 msecs [15469.793273] ACPI: Preparing to enter system sleep state S3 [15469.832959] ACPI : EC: EC stopped [15469.832959] PM: Saving platform NVS memory [15469.832984] Disabling non-boot CPUs ... [15469.833264] Broke affinity for irq 29 [15469.834274] smpboot: CPU 1 is now offline [15469.845524] Broke affinity for irq 28 [15469.845527] Broke affinity for irq 29 [15469.846541] smpboot: CPU 2 is now offline [15469.857478] Broke affinity for irq 28 [15469.857481] Broke affinity for irq 29 [15469.858497] smpboot: CPU 3 is now offline [15469.873422] Broke affinity for irq 18 [15469.873429] Broke affinity for irq 28 [15469.873432] Broke affinity for irq 29 [15469.874446] smpboot: CPU 4 is now offline [15469.885363] Broke affinity for irq 18 [15469.885366] Broke affinity for irq 23 [15469.885370] Broke affinity for irq 28 [15469.885372] Broke affinity for irq 29 [15469.886381] smpboot: CPU 5 is now offline [15469.897353] Broke affinity for irq 18 [15469.897355] Broke affinity for irq 23 [15469.897359] Broke affinity for irq 28 [15469.897361] Broke affinity for irq 29 [15469.898369] smpboot: CPU 6 is now offline [15469.909256] Broke affinity for irq 1 [15469.909259] Broke affinity for irq 8 [15469.909260] Broke affinity for irq 9 [15469.909263] Broke affinity for irq 12 [15469.909265] Broke affinity for irq 16 [15469.909267] Broke affinity for irq 18 [15469.909269] Broke affinity for irq 23 [15469.909271] Broke affinity for irq 27 [15469.909273] Broke affinity for irq 28 [15469.909275] Broke affinity for irq 29 [15469.910286] smpboot: CPU 7 is now offline [15469.926392] ACPI: Low-level resume complete [15469.926434] ACPI : EC: EC started [15469.926435] PM: Restoring platform NVS memory [15469.926808] Enabling non-boot CPUs ... [15469.946604] x86: Booting SMP configuration: [15469.946605] smpboot: Booting Node 0 Processor 1 APIC 0x2 [15469.950160] cache: parent cpu1 should not be sleeping [15469.950284] CPU1 is up [15469.966656] smpboot: Booting Node 0 Processor 2 APIC 0x4 [15469.970249] cache: parent cpu2 should not be sleeping [15469.970375] CPU2 is up [15469.986699] smpboot: Booting Node 0 Processor 3 APIC 0x6 [15469.990284] cache: parent cpu3 should not be sleeping [15469.990404] CPU3 is up [15470.010743] smpboot: Booting Node 0 Processor 4 APIC 0x1 [15470.014157] cache: parent cpu4 should not be sleeping [15470.014281] CPU4 is up [15470.030787] smpboot: Booting Node 0 Processor 5 APIC 0x3 [15470.034226] cache: parent cpu5 should not be sleeping [15470.034351] CPU5 is up [15470.050652] smpboot: Booting Node 0 Processor 6 APIC 0x5 [15470.053982] cache: parent cpu6 should not be sleeping [15470.054057] CPU6 is up [15470.066643] smpboot: Booting Node 0 Processor 7 APIC 0x7 [15470.069936] cache: parent cpu7 should not be sleeping [15470.070015] CPU7 is up [15470.075996] ACPI: Waking up from system sleep state S3 [15470.642598] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [15470.642664] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [15470.654617] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [15470.666462] PM: noirq resume of devices complete after 27.578 msecs [15470.686870] PM: early resume of devices complete after 20.394 msecs [15470.686973] usb usb3: root hub lost power or was reset [15470.686975] usb usb4: root hub lost power or was reset [15470.687056] ath: phy0: ASPM enabled: 0x43 [15470.687125] rtc_cmos 00:02: System wakeup disabled by ACPI [15470.690902] sd 5:0:0:0: [sda] Starting disk [15470.914448] usb 2-1: reset high-speed USB device number 2 using ehci-pci [15470.914450] usb 1-1: reset high-speed USB device number 2 using ehci-pci [15471.010441] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [15471.016199] ata3.00: configured for UDMA/100 [15471.022511] usb 3-4: reset high-speed USB device number 2 using xhci_hcd [15471.326463] usb 3-9: reset high-speed USB device number 3 using xhci_hcd [15471.566503] usb 3-10: reset full-speed USB device number 5 using xhci_hcd [15471.694630] usb 3-10: device firmware changed [15471.694891] PM: resume of devices complete after 1008.041 msecs [15471.695050] PM: Finishing wakeup. [15471.695051] Restarting tasks ... done. [15471.706313] usb 3-10: USB disconnect, device number 5 [15471.822379] usb 3-10: new full-speed USB device number 6 using xhci_hcd [15471.955399] usb 3-10: New USB device found, idVendor=13d3, idProduct=3408 [15471.955402] usb 3-10: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [15472.202411] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [15472.203956] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [15472.203958] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [15472.203960] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [15472.206869] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [15472.206871] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [15472.206872] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [15472.208236] ata6.00: configured for UDMA/100 [15473.513430] usb 3-10: USB disconnect, device number 6 [15473.782359] usb 3-10: new full-speed USB device number 7 using xhci_hcd [15474.582890] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [15474.598907] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [15474.620863] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready [15474.621185] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready [15474.847586] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [15475.811648] wlp3s0: authenticate with 18:8b:9d:2c:47:80 [15475.824391] wlp3s0: send auth to 18:8b:9d:2c:47:80 (try 1/3) [15475.825892] wlp3s0: authenticated [15475.826314] wlp3s0: associate with 18:8b:9d:2c:47:80 (try 1/3) [15475.829915] wlp3s0: RX AssocResp from 18:8b:9d:2c:47:80 (capab=0x431 status=0 aid=22) [15475.829986] wlp3s0: associated [15475.829994] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [15475.842620] ath: EEPROM regdomain: 0x833a [15475.842622] ath: EEPROM indicates we should expect a country code [15475.842623] ath: doing EEPROM country->regdmn map search [15475.842623] ath: country maps to regdmn code: 0x37 [15475.842624] ath: Country alpha2 being used: GB [15475.842625] ath: Regpair used: 0x37 [15475.842626] ath: regdomain 0x833a dynamically updated by country IE [15475.842643] cfg80211: Regulatory domain changed to country: GB [15475.842644] cfg80211: DFS Master region: ETSI [15475.842645] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [15475.842646] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [15475.842647] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [15475.842648] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [15475.842649] cfg80211: (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700 mBm), (0 s) [15475.842650] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) [15475.922299] wlp3s0: Limiting TX power to 4 dBm as advertised by 18:8b:9d:2c:47:80 [15476.374302] [drm] stuck on render ring [15476.374915] [drm] GPU HANG: ecode 7:0:0x85dfbff8, in compiz [3876], reason: Ring hung, action: reset [15476.374916] [drm] GPU hangs can indicate a bug anywhere in the entire gfx stack, including userspace. [15476.374917] [drm] Please file a _new_ bug report on bugs.freedesktop.org against DRI -> DRM/Intel [15476.374918] [drm] drm/i915 developers can then reassign to the right component if it's not a kernel issue. [15476.374918] [drm] The gpu crash dump is required to analyze gpu hangs, so please always attach it. [15476.374919] [drm] GPU crash dump saved to /sys/class/drm/card0/error [15476.377005] drm/i915: Resetting chip after gpu hang [15478.894251] usb 3-10: device descriptor read/64, error -110 [15482.314166] [drm] stuck on render ring [15482.314814] [drm] GPU HANG: ecode 7:0:0x85dfbff8, in compiz [3876], reason: Ring hung, action: reset [15482.316912] drm/i915: Resetting chip after gpu hang [15484.127306] usb 3-10: New USB device found, idVendor=13d3, idProduct=3408 [15484.127309] usb 3-10: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [15484.474245] cfg80211: World regulatory domain updated: [15484.474247] cfg80211: DFS Master region: unset [15484.474248] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [15484.474250] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [15484.474251] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [15484.474251] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [15484.474253] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [15484.474254] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [15484.474255] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [15484.474255] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [15484.474256] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [15484.722833] wlp3s0: authenticate with 80:e0:1d:9c:2b:90 [15484.741242] wlp3s0: send auth to 80:e0:1d:9c:2b:90 (try 1/3) [15484.743281] wlp3s0: authenticated [15484.746100] wlp3s0: associate with 80:e0:1d:9c:2b:90 (try 1/3) [15484.759389] wlp3s0: RX AssocResp from 80:e0:1d:9c:2b:90 (capab=0x431 status=0 aid=14) [15484.759492] wlp3s0: associated [15484.797537] wlp3s0: Limiting TX power to 7 dBm as advertised by 80:e0:1d:9c:2b:90 [15484.936830] ath: EEPROM regdomain: 0x833a [15484.936832] ath: EEPROM indicates we should expect a country code [15484.936833] ath: doing EEPROM country->regdmn map search [15484.936834] ath: country maps to regdmn code: 0x37 [15484.936835] ath: Country alpha2 being used: GB [15484.936835] ath: Regpair used: 0x37 [15484.936836] ath: regdomain 0x833a dynamically updated by country IE [15484.936856] cfg80211: Regulatory domain changed to country: GB [15484.936857] cfg80211: DFS Master region: ETSI [15484.936857] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [15484.936859] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [15484.936860] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [15484.936861] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [15484.936862] cfg80211: (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700 mBm), (0 s) [15484.936863] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) [15490.222864] wlp3s0: authenticate with 84:78:ac:8c:c2:f0 [15490.235567] wlp3s0: send auth to 84:78:ac:8c:c2:f0 (try 1/3) [15490.237046] wlp3s0: authenticated [15490.237987] wlp3s0: associate with 84:78:ac:8c:c2:f0 (try 1/3) [15490.241916] wlp3s0: RX AssocResp from 84:78:ac:8c:c2:f0 (capab=0x431 status=0 aid=61) [15490.242006] wlp3s0: associated [15490.247167] wlp3s0: Limiting TX power to 12 dBm as advertised by 84:78:ac:8c:c2:f0 [15490.381796] cfg80211: World regulatory domain updated: [15490.381799] cfg80211: DFS Master region: unset [15490.381800] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [15490.381801] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [15490.381803] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [15490.381803] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [15490.381805] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [15490.381806] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [15490.381807] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [15490.381808] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [15490.381809] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [15490.405187] ath: EEPROM regdomain: 0x833a [15490.405189] ath: EEPROM indicates we should expect a country code [15490.405190] ath: doing EEPROM country->regdmn map search [15490.405190] ath: country maps to regdmn code: 0x37 [15490.405191] ath: Country alpha2 being used: GB [15490.405192] ath: Regpair used: 0x37 [15490.405193] ath: regdomain 0x833a dynamically updated by country IE [15490.405212] cfg80211: Regulatory domain changed to country: GB [15490.405213] cfg80211: DFS Master region: ETSI [15490.405214] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [15490.405215] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [15490.405216] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [15490.405217] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [15490.405218] cfg80211: (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700 mBm), (0 s) [15490.405219] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) [15533.990164] wlp3s0: authenticate with 80:e0:1d:9c:2b:90 [15534.002784] wlp3s0: send auth to 80:e0:1d:9c:2b:90 (try 1/3) [15534.015320] cfg80211: World regulatory domain updated: [15534.015323] cfg80211: DFS Master region: unset [15534.015323] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [15534.015325] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [15534.015326] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [15534.015327] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [15534.015328] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [15534.015329] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [15534.015330] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [15534.015331] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [15534.015332] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [15534.021441] wlp3s0: authenticated [15534.025022] wlp3s0: associate with 80:e0:1d:9c:2b:90 (try 1/3) [15534.029138] wlp3s0: RX AssocResp from 80:e0:1d:9c:2b:90 (capab=0x431 status=0 aid=14) [15534.029239] wlp3s0: associated [15534.043108] ath: EEPROM regdomain: 0x833a [15534.043110] ath: EEPROM indicates we should expect a country code [15534.043111] ath: doing EEPROM country->regdmn map search [15534.043112] ath: country maps to regdmn code: 0x37 [15534.043113] ath: Country alpha2 being used: GB [15534.043113] ath: Regpair used: 0x37 [15534.043114] ath: regdomain 0x833a dynamically updated by country IE [15534.043133] cfg80211: Regulatory domain changed to country: GB [15534.043134] cfg80211: DFS Master region: ETSI [15534.043135] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [15534.043136] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [15534.043137] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [15534.043138] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [15534.043139] cfg80211: (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700 mBm), (0 s) [15534.043140] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) [15534.093175] wlp3s0: Limiting TX power to 7 dBm as advertised by 80:e0:1d:9c:2b:90 [15546.854076] wlp3s0: authenticate with 04:da:d2:aa:25:90 [15546.866625] wlp3s0: send auth to 04:da:d2:aa:25:90 (try 1/3) [15546.872546] wlp3s0: authenticated [15546.872717] wlp3s0: associate with 04:da:d2:aa:25:90 (try 1/3) [15546.877330] wlp3s0: RX AssocResp from 04:da:d2:aa:25:90 (capab=0x431 status=0 aid=7) [15546.877431] wlp3s0: associated [15546.879819] cfg80211: World regulatory domain updated: [15546.879821] cfg80211: DFS Master region: unset [15546.879822] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [15546.879823] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [15546.879824] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [15546.879825] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [15546.879826] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [15546.879827] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [15546.879828] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [15546.879829] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [15546.879830] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [15546.904909] ath: EEPROM regdomain: 0x833a [15546.904911] ath: EEPROM indicates we should expect a country code [15546.904912] ath: doing EEPROM country->regdmn map search [15546.904913] ath: country maps to regdmn code: 0x37 [15546.904914] ath: Country alpha2 being used: GB [15546.904914] ath: Regpair used: 0x37 [15546.904915] ath: regdomain 0x833a dynamically updated by country IE [15546.904935] cfg80211: Regulatory domain changed to country: GB [15546.904936] cfg80211: DFS Master region: ETSI [15546.904937] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [15546.904938] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [15546.904939] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [15546.904940] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [15546.904941] cfg80211: (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700 mBm), (0 s) [15546.904942] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) [15546.974696] wlp3s0: Limiting TX power to 6 dBm as advertised by 04:da:d2:aa:25:90 [15547.648754] usb 3-3: new high-speed USB device number 8 using xhci_hcd [15547.778528] usb 3-3: New USB device found, idVendor=04e8, idProduct=6860 [15547.778531] usb 3-3: New USB device strings: Mfr=2, Product=3, SerialNumber=4 [15547.778532] usb 3-3: Product: SAMSUNG_Android [15547.778534] usb 3-3: Manufacturer: SAMSUNG [15547.778535] usb 3-3: SerialNumber: 3204ca98018c118d [15553.216808] usb 3-3: USB disconnect, device number 8 [15553.456586] usb 3-3: new high-speed USB device number 9 using xhci_hcd [15553.585979] usb 3-3: New USB device found, idVendor=04e8, idProduct=6860 [15553.585982] usb 3-3: New USB device strings: Mfr=2, Product=3, SerialNumber=4 [15553.585983] usb 3-3: Product: SAMSUNG_Android [15553.585985] usb 3-3: Manufacturer: SAMSUNG [15553.585986] usb 3-3: SerialNumber: 3204ca98018c118d [15579.372844] wlp3s0: authenticate with 80:e0:1d:9c:2b:90 [15579.385428] wlp3s0: send auth to 80:e0:1d:9c:2b:90 (try 1/3) [15579.388711] wlp3s0: authenticated [15579.392124] wlp3s0: associate with 80:e0:1d:9c:2b:90 (try 1/3) [15579.400040] cfg80211: World regulatory domain updated: [15579.400042] cfg80211: DFS Master region: unset [15579.400043] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [15579.400044] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [15579.400045] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [15579.400046] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [15579.400047] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [15579.400048] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [15579.400049] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [15579.400050] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [15579.400051] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [15579.401330] wlp3s0: RX AssocResp from 80:e0:1d:9c:2b:90 (capab=0x431 status=0 aid=14) [15579.401446] wlp3s0: associated [15579.414272] ath: EEPROM regdomain: 0x833a [15579.414275] ath: EEPROM indicates we should expect a country code [15579.414275] ath: doing EEPROM country->regdmn map search [15579.414276] ath: country maps to regdmn code: 0x37 [15579.414277] ath: Country alpha2 being used: GB [15579.414278] ath: Regpair used: 0x37 [15579.414279] ath: regdomain 0x833a dynamically updated by country IE [15579.414298] cfg80211: Regulatory domain changed to country: GB [15579.414298] cfg80211: DFS Master region: ETSI [15579.414299] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [15579.414301] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [15579.414302] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [15579.414303] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [15579.414304] cfg80211: (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700 mBm), (0 s) [15579.414305] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) [15579.422692] wlp3s0: Limiting TX power to 7 dBm as advertised by 80:e0:1d:9c:2b:90 [15661.307261] wlp3s0: authenticate with 84:78:ac:8c:c2:f0 [15661.319908] wlp3s0: send auth to 84:78:ac:8c:c2:f0 (try 1/3) [15661.321387] wlp3s0: authenticated [15661.322093] wlp3s0: associate with 84:78:ac:8c:c2:f0 (try 1/3) [15661.325966] wlp3s0: RX AssocResp from 84:78:ac:8c:c2:f0 (capab=0x431 status=0 aid=62) [15661.326037] wlp3s0: associated [15661.332541] wlp3s0: Limiting TX power to 12 dBm as advertised by 84:78:ac:8c:c2:f0 [15661.332887] cfg80211: World regulatory domain updated: [15661.332889] cfg80211: DFS Master region: unset [15661.332890] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [15661.332891] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [15661.332892] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [15661.332893] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [15661.332894] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [15661.332895] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [15661.332896] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [15661.332897] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [15661.332898] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [15661.356794] ath: EEPROM regdomain: 0x833a [15661.356796] ath: EEPROM indicates we should expect a country code [15661.356797] ath: doing EEPROM country->regdmn map search [15661.356798] ath: country maps to regdmn code: 0x37 [15661.356798] ath: Country alpha2 being used: GB [15661.356799] ath: Regpair used: 0x37 [15661.356800] ath: regdomain 0x833a dynamically updated by country IE [15661.356819] cfg80211: Regulatory domain changed to country: GB [15661.356820] cfg80211: DFS Master region: ETSI [15661.356821] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [15661.356822] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [15661.356823] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [15661.356824] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [15661.356825] cfg80211: (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700 mBm), (0 s) [15661.356826] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) [15679.282810] wlp3s0: authenticate with 80:e0:1d:9c:2b:90 [15679.295461] wlp3s0: send auth to 80:e0:1d:9c:2b:90 (try 1/3) [15679.298597] wlp3s0: authenticated [15679.301738] wlp3s0: associate with 80:e0:1d:9c:2b:90 (try 1/3) [15679.305822] wlp3s0: RX AssocResp from 80:e0:1d:9c:2b:90 (capab=0x431 status=0 aid=16) [15679.305921] wlp3s0: associated [15679.308140] cfg80211: World regulatory domain updated: [15679.308142] cfg80211: DFS Master region: unset [15679.308143] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [15679.308144] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [15679.308145] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [15679.308146] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [15679.308147] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [15679.308148] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [15679.308149] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [15679.308149] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [15679.308150] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [15679.332829] ath: EEPROM regdomain: 0x833a [15679.332831] ath: EEPROM indicates we should expect a country code [15679.332832] ath: doing EEPROM country->regdmn map search [15679.332833] ath: country maps to regdmn code: 0x37 [15679.332834] ath: Country alpha2 being used: GB [15679.332834] ath: Regpair used: 0x37 [15679.332835] ath: regdomain 0x833a dynamically updated by country IE [15679.332855] cfg80211: Regulatory domain changed to country: GB [15679.332856] cfg80211: DFS Master region: ETSI [15679.332856] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [15679.332858] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [15679.332859] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [15679.332860] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [15679.332861] cfg80211: (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700 mBm), (0 s) [15679.332862] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) [15679.376837] wlp3s0: Limiting TX power to 7 dBm as advertised by 80:e0:1d:9c:2b:90 [16247.125840] wlp3s0: authenticate with 84:78:ac:8c:c2:f0 [16247.138626] wlp3s0: send auth to 84:78:ac:8c:c2:f0 (try 1/3) [16247.141038] wlp3s0: authenticated [16247.144236] wlp3s0: associate with 84:78:ac:8c:c2:f0 (try 1/3) [16247.148246] wlp3s0: RX AssocResp from 84:78:ac:8c:c2:f0 (capab=0x431 status=0 aid=64) [16247.148324] wlp3s0: associated [16247.160933] cfg80211: World regulatory domain updated: [16247.160936] cfg80211: DFS Master region: unset [16247.160938] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [16247.160940] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [16247.160941] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [16247.160943] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [16247.160944] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [16247.160946] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [16247.160948] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [16247.160949] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [16247.160951] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [16247.167735] wlp3s0: Limiting TX power to 12 dBm as advertised by 84:78:ac:8c:c2:f0 [16247.186121] ath: EEPROM regdomain: 0x833a [16247.186123] ath: EEPROM indicates we should expect a country code [16247.186124] ath: doing EEPROM country->regdmn map search [16247.186125] ath: country maps to regdmn code: 0x37 [16247.186126] ath: Country alpha2 being used: GB [16247.186126] ath: Regpair used: 0x37 [16247.186128] ath: regdomain 0x833a dynamically updated by country IE [16247.186147] cfg80211: Regulatory domain changed to country: GB [16247.186148] cfg80211: DFS Master region: ETSI [16247.186149] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [16247.186150] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [16247.186151] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [16247.186152] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [16247.186153] cfg80211: (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700 mBm), (0 s) [16247.186154] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) [16396.037678] wlp3s0: authenticate with 80:e0:1d:9c:2b:90 [16396.050341] wlp3s0: send auth to 80:e0:1d:9c:2b:90 (try 1/3) [16396.051821] wlp3s0: authenticated [16396.052511] wlp3s0: associate with 80:e0:1d:9c:2b:90 (try 1/3) [16396.056329] wlp3s0: RX AssocResp from 80:e0:1d:9c:2b:90 (capab=0x431 status=0 aid=16) [16396.056401] wlp3s0: associated [16396.063487] cfg80211: World regulatory domain updated: [16396.063490] cfg80211: DFS Master region: unset [16396.063491] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [16396.063493] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [16396.063494] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [16396.063496] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [16396.063498] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [16396.063499] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [16396.063501] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [16396.063502] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [16396.063504] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [16396.081391] wlp3s0: Limiting TX power to 7 dBm as advertised by 80:e0:1d:9c:2b:90 [16396.088813] ath: EEPROM regdomain: 0x833a [16396.088815] ath: EEPROM indicates we should expect a country code [16396.088816] ath: doing EEPROM country->regdmn map search [16396.088816] ath: country maps to regdmn code: 0x37 [16396.088817] ath: Country alpha2 being used: GB [16396.088818] ath: Regpair used: 0x37 [16396.088819] ath: regdomain 0x833a dynamically updated by country IE [16396.088836] cfg80211: Regulatory domain changed to country: GB [16396.088837] cfg80211: DFS Master region: ETSI [16396.088838] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [16396.088839] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [16396.088840] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [16396.088841] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [16396.088842] cfg80211: (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700 mBm), (0 s) [16396.088843] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)