[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.0.0-4-generic (buildd@toyol) (gcc version 4.9.2 (Ubuntu 4.9.2-22ubuntu1) ) #6-Ubuntu SMP Tue Jun 30 20:49:28 UTC 2015 (Ubuntu 4.0.0-4.6-generic 4.0.7) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.0.0-4-generic root=UUID=ac815121-90e9-4b7f-889e-b737ff1babe1 ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000a5a3dfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000a5a3e000-0x00000000baeedfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000baeee000-0x00000000baf9efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000baf9f000-0x00000000baffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000bafff000-0x00000000bf9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff980000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013f5fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Dell Inc. Dell System XPS L322X/ , BIOS X29 08/17/2012 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] AGP: No AGP bridge found [ 0.000000] e820: last_pfn = 0x13f600 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0FF800000 mask FFF800000 write-protect [ 0.000000] 1 base 000000000 mask F80000000 write-back [ 0.000000] 2 base 080000000 mask FC0000000 write-back [ 0.000000] 3 base 0BC000000 mask FFC000000 uncachable [ 0.000000] 4 base 0BB000000 mask FFF000000 uncachable [ 0.000000] 5 base 100000000 mask FC0000000 write-back [ 0.000000] 6 base 13F800000 mask FFF800000 uncachable [ 0.000000] 7 base 13F600000 mask FFFE00000 uncachable [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC [ 0.000000] e820: last_pfn = 0xa5a3e max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000f0100-0x000f010f] mapped at [ffff8800000f0100] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x01fdf000, 0x01fdffff] PGTABLE [ 0.000000] BRK [0x01fe0000, 0x01fe0fff] PGTABLE [ 0.000000] BRK [0x01fe1000, 0x01fe1fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x13f400000-0x13f5fffff] [ 0.000000] [mem 0x13f400000-0x13f5fffff] page 2M [ 0.000000] BRK [0x01fe2000, 0x01fe2fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x120000000-0x13f3fffff] [ 0.000000] [mem 0x120000000-0x13f3fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x100000000-0x11fffffff] [ 0.000000] [mem 0x100000000-0x11fffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x1fffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x20200000-0x40003fff] [ 0.000000] [mem 0x20200000-0x3fffffff] page 2M [ 0.000000] [mem 0x40000000-0x40003fff] page 4k [ 0.000000] BRK [0x01fe3000, 0x01fe3fff] PGTABLE [ 0.000000] BRK [0x01fe4000, 0x01fe4fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x40005000-0xa5a3dfff] [ 0.000000] [mem 0x40005000-0x401fffff] page 4k [ 0.000000] [mem 0x40200000-0xa59fffff] page 2M [ 0.000000] [mem 0xa5a00000-0xa5a3dfff] page 4k [ 0.000000] RAMDISK: [mem 0x357dc000-0x36be5fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F0120 000024 (v02 DELL ) [ 0.000000] ACPI: XSDT 0x00000000BAFFE170 0000A4 (v01 DELL QA09 00000002 LOHR 00000002) [ 0.000000] ACPI: FACP 0x00000000BAFE4000 00010C (v05 DELL QA09 00000002 LOHR 00000002) [ 0.000000] ACPI: DSDT 0x00000000BAFF2000 009FF4 (v02 DELL IVB-CPT 00000000 INTL 20061109) [ 0.000000] ACPI: FACS 0x00000000BAF7C000 000040 [ 0.000000] ACPI: SLIC 0x00000000BAFFD000 000176 (v01 DELL QA09 00000002 LOHR 00000001) [ 0.000000] ACPI: SSDT 0x00000000BAFFC000 000166 (v01 DELL PtidDevc 00001000 INTL 20061109) [ 0.000000] ACPI: ASF! 0x00000000BAFF1000 0000A5 (v32 DELL QA09 00000002 LOHR 00000002) [ 0.000000] ACPI: HPET 0x00000000BAFEE000 000038 (v01 DELL QA09 00000002 LOHR 00000002) [ 0.000000] ACPI: APIC 0x00000000BAFED000 000098 (v01 DELL QA09 00000002 LOHR 00000002) [ 0.000000] ACPI: MCFG 0x00000000BAFEC000 00003C (v01 DELL QA09 00000002 LOHR 00000002) [ 0.000000] ACPI: FPDT 0x00000000BAFEB000 000064 (v01 DELL QA09 00000002 LOHR 00000002) [ 0.000000] ACPI: SSDT 0x00000000BAFEA000 0008A2 (v01 PmRef Cpu0Ist 00003000 INTL 20061109) [ 0.000000] ACPI: SSDT 0x00000000BAFE9000 000A92 (v01 PmRef CpuPm 00003000 INTL 20061109) [ 0.000000] ACPI: UEFI 0x00000000BAFE8000 00003E (v01 DELL QA09 00000002 LOHR 00000002) [ 0.000000] ACPI: UEFI 0x00000000BAFE7000 000042 (v01 PTL COMBUF 00000001 PTL 00000001) [ 0.000000] ACPI: POAT 0x00000000BAFE6000 000055 (v03 DELL QA09 00000002 LOHR 00000002) [ 0.000000] ACPI: UEFI 0x00000000BAFE3000 00027E (v01 DELL QA09 00000002 LOHR 00000002) [ 0.000000] ACPI: SSDT 0x00000000BAFE2000 0003E0 (v01 DELL AoacTabl 00001000 INTL 20061109) [ 0.000000] ACPI: DBG2 0x00000000BAFE0000 000070 (v00 DELL QA09 00000002 LOHR 00000002) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000013f5fffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x13f5f9000-0x13f5fdfff] [ 0.000000] [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013b200000-ffff88013ebfffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000013f5fffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000001fffffff] [ 0.000000] node 0: [mem 0x0000000020200000-0x0000000040003fff] [ 0.000000] node 0: [mem 0x0000000040005000-0x00000000a5a3dfff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000013f5fffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000013f5fffff] [ 0.000000] On node 0 totalpages: 937433 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 10529 pages used for memmap [ 0.000000] DMA32 zone: 673853 pages, LIFO batch:31 [ 0.000000] Normal zone: 4056 pages used for memmap [ 0.000000] Normal zone: 259584 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics stolen memory at 0xbba00000-0xbf9fffff [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff] [ 0.000000] PM: Registered nosave memory: [mem 0xa5a3e000-0xbaeedfff] [ 0.000000] PM: Registered nosave memory: [mem 0xbaeee000-0xbaf9efff] [ 0.000000] PM: Registered nosave memory: [mem 0xbaf9f000-0xbaffefff] [ 0.000000] PM: Registered nosave memory: [mem 0xbafff000-0xbf9fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbfa00000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff97ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff980000-0xffffffff] [ 0.000000] e820: [mem 0xbfa00000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 32 pages/cpu @ffff88013f200000 s92056 r8192 d30824 u262144 [ 0.000000] pcpu-alloc: s92056 r8192 d30824 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 922763 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.0.0-4-generic root=UUID=ac815121-90e9-4b7f-889e-b737ff1babe1 ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form [ 0.000000] AGP: Checking aperture... [ 0.000000] AGP: No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 3586104K/3749732K available (8053K kernel code, 1207K rwdata, 3816K rodata, 1412K init, 1300K bss, 163628K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.000000] NR_IRQS:16640 nr_irqs:488 16 [ 0.000000] Offload RCU callbacks from all CPUs [ 0.000000] Offload RCU callbacks from CPUs: 0-7. [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 1696.095 MHz processor [ 0.000050] Calibrating delay loop (skipped), value calculated using timer frequency.. 3392.19 BogoMIPS (lpj=6784380) [ 0.000054] pid_max: default: 32768 minimum: 301 [ 0.000060] ACPI: Core revision 20150204 [ 0.010960] ACPI: All ACPI Tables successfully acquired [ 0.011248] Security Framework initialized [ 0.011270] AppArmor: AppArmor initialized [ 0.011272] Yama: becoming mindful. [ 0.011678] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.013213] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.013892] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.013900] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.014148] Initializing cgroup subsys blkio [ 0.014152] Initializing cgroup subsys memory [ 0.014161] Initializing cgroup subsys devices [ 0.014164] Initializing cgroup subsys freezer [ 0.014166] Initializing cgroup subsys net_cls [ 0.014169] Initializing cgroup subsys perf_event [ 0.014172] Initializing cgroup subsys net_prio [ 0.014175] Initializing cgroup subsys hugetlb [ 0.014207] CPU: Physical Processor ID: 0 [ 0.014208] CPU: Processor Core ID: 0 [ 0.014213] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.014215] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.014773] mce: CPU supports 7 MCE banks [ 0.014785] CPU0: Thermal monitoring handled by SMI [ 0.014792] process: using mwait in idle threads [ 0.014797] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 0.014798] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.014974] Freeing SMP alternatives memory: 32K (ffffffff81e90000 - ffffffff81e98000) [ 0.016830] ftrace: allocating 30285 entries in 119 pages [ 0.036954] x2apic: IRQ remapping doesn't support X2APIC mode [ 0.037439] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.077149] TSC deadline timer enabled [ 0.077154] smpboot: CPU0: Intel(R) Core(TM) i5-3317U CPU @ 1.70GHz (fam: 06, model: 3a, stepping: 09) [ 0.077192] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver. [ 0.077220] ... version: 3 [ 0.077221] ... bit width: 48 [ 0.077223] ... generic registers: 4 [ 0.077224] ... value mask: 0000ffffffffffff [ 0.077225] ... max period: 0000ffffffffffff [ 0.077226] ... fixed-purpose events: 3 [ 0.077228] ... event mask: 000000070000000f [ 0.078426] x86: Booting SMP configuration: [ 0.078428] .... node #0, CPUs: #1 [ 0.090046] CPU1: Thermal monitoring handled by SMI [ 0.092249] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.092387] #2 [ 0.104030] CPU2: Thermal monitoring handled by SMI [ 0.106277] #3 [ 0.117819] CPU3: Thermal monitoring handled by SMI [ 0.119944] x86: Booted up 1 node, 4 CPUs [ 0.119947] smpboot: Total of 4 processors activated (13568.76 BogoMIPS) [ 0.124557] devtmpfs: initialized [ 0.127862] evm: security.selinux [ 0.127864] evm: security.SMACK64 [ 0.127865] evm: security.SMACK64EXEC [ 0.127867] evm: security.SMACK64TRANSMUTE [ 0.127868] evm: security.SMACK64MMAP [ 0.127869] evm: security.ima [ 0.127870] evm: security.capability [ 0.127951] PM: Registering ACPI NVS region [mem 0xbaeee000-0xbaf9efff] (724992 bytes) [ 0.128195] pinctrl core: initialized pinctrl subsystem [ 0.128340] RTC time: 11:24:56, date: 07/09/15 [ 0.128491] NET: Registered protocol family 16 [ 0.132344] cpuidle: using governor ladder [ 0.136347] cpuidle: using governor menu [ 0.136422] ACPI: bus type PCI registered [ 0.136424] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.136533] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.136537] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.136657] PCI: Using configuration type 1 for base access [ 0.136907] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.136908] mtrr: probably your BIOS does not setup all CPUs. [ 0.136909] mtrr: corrected configuration. [ 0.140861] ACPI: Added _OSI(Module Device) [ 0.140864] ACPI: Added _OSI(Processor Device) [ 0.140865] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.140867] ACPI: Added _OSI(Processor Aggregator Device) [ 0.144596] ACPI: Executed 2 blocks of module-level executable AML code [ 0.147400] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.147921] ACPI: Dynamic OEM Table Load: [ 0.147934] ACPI: SSDT 0xFFFF88013A343000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 0.148677] ACPI: Dynamic OEM Table Load: [ 0.148687] ACPI: SSDT 0xFFFF88013A351000 000303 (v01 PmRef ApIst 00003000 INTL 20061109) [ 0.149322] ACPI: Dynamic OEM Table Load: [ 0.149330] ACPI: SSDT 0xFFFF88013A2D3400 000119 (v01 PmRef ApCst 00003000 INTL 20061109) [ 0.152432] ACPI: Interpreter enabled [ 0.152445] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150204/hwxface-580) [ 0.152451] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150204/hwxface-580) [ 0.152470] ACPI: (supports S0 S3 S4 S5) [ 0.152471] ACPI: Using IOAPIC for interrupt routing [ 0.152512] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.159286] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.159294] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.159470] \_SB_.PCI0:_OSC invalid UUID [ 0.159471] _OSC request data:1 1f 0 [ 0.159476] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM [ 0.159989] PCI host bridge to bus 0000:00 [ 0.159993] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.159996] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.159999] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.160001] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.160004] pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xfeafffff window] [ 0.160014] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000 [ 0.160122] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000 [ 0.160137] pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd03fffff 64bit] [ 0.160146] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.160153] pci 0000:00:02.0: reg 0x20: [io 0x2000-0x203f] [ 0.160292] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330 [ 0.160322] pci 0000:00:14.0: reg 0x10: [mem 0xd0500000-0xd050ffff 64bit] [ 0.160426] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.160464] pci 0000:00:14.0: System wakeup disabled by ACPI [ 0.160525] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000 [ 0.160554] pci 0000:00:16.0: reg 0x10: [mem 0xd0515000-0xd051500f 64bit] [ 0.160649] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.160754] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320 [ 0.160780] pci 0000:00:1a.0: reg 0x10: [mem 0xd051a000-0xd051a3ff] [ 0.160891] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.160949] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 0.161007] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300 [ 0.161029] pci 0000:00:1b.0: reg 0x10: [mem 0xd0510000-0xd0513fff 64bit] [ 0.161124] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.161215] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400 [ 0.161361] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.161408] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.161479] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320 [ 0.161505] pci 0000:00:1d.0: reg 0x10: [mem 0xd0519000-0xd05193ff] [ 0.161618] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.161672] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.161730] pci 0000:00:1f.0: [8086:1e56] type 00 class 0x060100 [ 0.161932] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601 [ 0.161957] pci 0000:00:1f.2: reg 0x10: [io 0x2098-0x209f] [ 0.161967] pci 0000:00:1f.2: reg 0x14: [io 0x20bc-0x20bf] [ 0.161977] pci 0000:00:1f.2: reg 0x18: [io 0x2090-0x2097] [ 0.161987] pci 0000:00:1f.2: reg 0x1c: [io 0x20b8-0x20bb] [ 0.161997] pci 0000:00:1f.2: reg 0x20: [io 0x2060-0x207f] [ 0.162007] pci 0000:00:1f.2: reg 0x24: [mem 0xd0518000-0xd05187ff] [ 0.162066] pci 0000:00:1f.2: PME# supported from D3hot [ 0.162148] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500 [ 0.162169] pci 0000:00:1f.3: reg 0x10: [mem 0xd0514000-0xd05140ff 64bit] [ 0.162197] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf] [ 0.162580] pci 0000:01:00.0: [8086:088e] type 00 class 0x028000 [ 0.162816] pci 0000:01:00.0: reg 0x10: [mem 0xd0400000-0xd0401fff 64bit] [ 0.163786] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.163960] pci 0000:01:00.0: System wakeup disabled by ACPI [ 0.168509] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.168519] pci 0000:00:1c.0: bridge window [mem 0xd0400000-0xd04fffff] [ 0.169165] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.169241] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.169314] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.169387] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.169458] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.169530] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.169603] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 11 12 14 15) *7 [ 0.169674] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.169971] ACPI: Enabled 4 GPEs in block 00 to 3F [ 0.170092] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 0.170235] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 0.170237] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.170241] vgaarb: loaded [ 0.170242] vgaarb: bridge control possible 0000:00:02.0 [ 0.170543] SCSI subsystem initialized [ 0.170594] libata version 3.00 loaded. [ 0.170627] ACPI: bus type USB registered [ 0.170652] usbcore: registered new interface driver usbfs [ 0.170664] usbcore: registered new interface driver hub [ 0.170687] usbcore: registered new device driver usb [ 0.170879] PCI: Using ACPI for IRQ routing [ 0.172822] PCI: pci_cache_line_size set to 64 bytes [ 0.172925] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff] [ 0.172927] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff] [ 0.172929] e820: reserve RAM buffer [mem 0xa5a3e000-0xa7ffffff] [ 0.172931] e820: reserve RAM buffer [mem 0x13f600000-0x13fffffff] [ 0.173077] NetLabel: Initializing [ 0.173079] NetLabel: domain hash size = 128 [ 0.173080] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.173097] NetLabel: unlabeled traffic allowed by default [ 0.173189] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.173196] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.175244] Switched to clocksource hpet [ 0.182223] AppArmor: AppArmor Filesystem Enabled [ 0.182313] pnp: PnP ACPI init [ 0.182477] system 00:00: [io 0x0680-0x069f] has been reserved [ 0.182480] system 00:00: [io 0x1000-0x1003] has been reserved [ 0.182483] system 00:00: [io 0x1004-0x1013] has been reserved [ 0.182485] system 00:00: [io 0xffff] has been reserved [ 0.182488] system 00:00: [io 0x0400-0x0453] could not be reserved [ 0.182491] system 00:00: [io 0x0458-0x047f] has been reserved [ 0.182493] system 00:00: [io 0x0500-0x057f] has been reserved [ 0.182495] system 00:00: [io 0x164e-0x164f] has been reserved [ 0.182500] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.182547] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.182611] system 00:02: [io 0x0454-0x0457] has been reserved [ 0.182615] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.182674] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.182718] pnp 00:04: Plug and Play ACPI device, IDs DLL058b PNP0f13 (active) [ 0.182931] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.182934] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.182937] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.182940] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.182942] system 00:05: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.182945] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.182947] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.182950] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.182952] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved [ 0.182955] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.182958] system 00:05: [mem 0xfffff000-0xffffffff] has been reserved [ 0.182961] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.183228] pnp: PnP ACPI: found 6 devices [ 0.190412] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.190425] pci 0000:00:1c.0: bridge window [mem 0xd0400000-0xd04fffff] [ 0.190439] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.190442] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.190445] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.190447] pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xfeafffff window] [ 0.190450] pci_bus 0000:01: resource 1 [mem 0xd0400000-0xd04fffff] [ 0.190492] NET: Registered protocol family 2 [ 0.190704] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.190809] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.190883] TCP: Hash tables configured (established 32768 bind 32768) [ 0.190903] TCP: reno registered [ 0.190912] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.190934] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.190999] NET: Registered protocol family 1 [ 0.191018] pci 0000:00:02.0: Video device with shadowed ROM [ 0.191609] PCI: CLS 64 bytes, default 64 [ 0.191679] Trying to unpack rootfs image as initramfs... [ 0.668382] Freeing initrd memory: 20520K (ffff8800357dc000 - ffff880036be6000) [ 0.668409] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.668413] software IO TLB [mem 0xa1a3e000-0xa5a3e000] (64MB) mapped at [ffff8800a1a3e000-ffff8800a5a3dfff] [ 0.668679] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer [ 0.668786] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x12 [ 0.668797] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x12 [ 0.668809] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x12 [ 0.668820] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x12 [ 0.668890] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 0.668926] Scanning for low memory corruption every 60 seconds [ 0.669409] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.669435] Initialise system trusted keyring [ 0.669461] audit: initializing netlink subsys (disabled) [ 0.669479] audit: type=2000 audit(1436441096.656:1): initialized [ 0.670000] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.672011] zpool: loaded [ 0.672015] zbud: loaded [ 0.672242] VFS: Disk quotas dquot_6.5.2 [ 0.672289] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.672881] fuse init (API version 7.23) [ 0.673063] Key type big_key registered [ 0.673584] Key type asymmetric registered [ 0.673590] Asymmetric key parser 'x509' registered [ 0.673640] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.673694] io scheduler noop registered [ 0.673700] io scheduler deadline registered (default) [ 0.673759] io scheduler cfq registered [ 0.674070] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.674093] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.674132] vesafb: mode is 1366x768x32, linelength=5504, pages=0 [ 0.674133] vesafb: scrolling: redraw [ 0.674136] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.674157] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90004800000, using 4160k, total 4160k [ 0.674286] Console: switching to colour frame buffer device 170x48 [ 0.674310] fb0: VESA VGA frame buffer device [ 0.674332] intel_idle: MWAIT substates: 0x21120 [ 0.674333] intel_idle: v0.4 model 0x3A [ 0.674335] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.879639] ACPI: AC Adapter [ADP0] (on-line) [ 0.879793] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.879799] ACPI: Power Button [PWRB] [ 0.879846] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 0.879849] ACPI: Sleep Button [SLPB] [ 0.879895] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2 [ 0.880214] ACPI: Lid Switch [LID0] [ 0.880275] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 0.880279] ACPI: Power Button [PWRF] [ 0.880899] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.880903] ACPI: Thermal Zone [TZ00] (63 C) [ 0.881202] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.881204] ACPI: Thermal Zone [TZ01] (63 C) [ 0.881256] GHES: HEST is not enabled! [ 0.881502] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.885030] Linux agpgart interface v0.103 [ 0.887248] ACPI: Battery Slot [BAT0] (battery present) [ 0.887869] brd: module loaded [ 0.889255] loop: module loaded [ 0.889543] libphy: Fixed MDIO Bus: probed [ 0.889549] tun: Universal TUN/TAP device driver, 1.6 [ 0.889550] tun: (C) 1999-2004 Max Krasnyansky [ 0.889624] PPP generic driver version 2.4.2 [ 0.889863] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.889872] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 0.889979] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x0000b930 [ 0.889989] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 0.890105] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.890108] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.890110] usb usb1: Product: xHCI Host Controller [ 0.890112] usb usb1: Manufacturer: Linux 4.0.0-4-generic xhci-hcd [ 0.890114] usb usb1: SerialNumber: 0000:00:14.0 [ 0.890277] hub 1-0:1.0: USB hub found [ 0.890292] hub 1-0:1.0: 4 ports detected [ 0.890746] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.890752] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 0.890801] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 0.890804] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.890806] usb usb2: Product: xHCI Host Controller [ 0.890808] usb usb2: Manufacturer: Linux 4.0.0-4-generic xhci-hcd [ 0.890810] usb usb2: SerialNumber: 0000:00:14.0 [ 0.890953] hub 2-0:1.0: USB hub found [ 0.890968] hub 2-0:1.0: 4 ports detected [ 0.891414] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.891422] ehci-pci: EHCI PCI platform driver [ 0.891538] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.891544] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 0.891563] ehci-pci 0000:00:1a.0: debug port 2 [ 0.895498] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 0.895516] ehci-pci 0000:00:1a.0: irq 16, io mem 0xd051a000 [ 0.903601] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.903648] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.903650] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.903652] usb usb3: Product: EHCI Host Controller [ 0.903654] usb usb3: Manufacturer: Linux 4.0.0-4-generic ehci_hcd [ 0.903656] usb usb3: SerialNumber: 0000:00:1a.0 [ 0.903807] hub 3-0:1.0: USB hub found [ 0.903815] hub 3-0:1.0: 2 ports detected [ 0.904070] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.904077] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4 [ 0.904097] ehci-pci 0000:00:1d.0: debug port 2 [ 0.908018] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 0.908035] ehci-pci 0000:00:1d.0: irq 23, io mem 0xd0519000 [ 0.919607] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.919653] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.919656] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.919658] usb usb4: Product: EHCI Host Controller [ 0.919660] usb usb4: Manufacturer: Linux 4.0.0-4-generic ehci_hcd [ 0.919662] usb usb4: SerialNumber: 0000:00:1d.0 [ 0.919813] hub 4-0:1.0: USB hub found [ 0.919821] hub 4-0:1.0: 2 ports detected [ 0.919973] ehci-platform: EHCI generic platform driver [ 0.919988] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.919995] ohci-pci: OHCI PCI platform driver [ 0.920009] ohci-platform: OHCI generic platform driver [ 0.920021] uhci_hcd: USB Universal Host Controller Interface driver [ 0.920094] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.923215] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.923221] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.923414] mousedev: PS/2 mouse device common for all mice [ 0.923752] rtc_cmos 00:01: RTC can wake from S4 [ 0.923916] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 0.923960] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.923985] i2c /dev entries driver [ 0.924057] device-mapper: uevent: version 1.0.3 [ 0.924152] device-mapper: ioctl: 4.30.0-ioctl (2014-12-22) initialised: dm-devel@redhat.com [ 0.924182] Intel P-state driver initializing. [ 0.924461] Consider also installing thermald for improved thermal control. [ 0.924481] ledtrig-cpu: registered to indicate activity on CPUs [ 0.924833] PCCT header not found. [ 0.925084] TCP: cubic registered [ 0.925352] NET: Registered protocol family 10 [ 0.925801] NET: Registered protocol family 17 [ 0.925820] Key type dns_resolver registered [ 0.926626] Loading compiled-in X.509 certificates [ 0.929243] Loaded X.509 cert 'Magrathea: Glacier signing key: 26bf405f8656a3ada4b645519d8a4dc52b9030e1' [ 0.929307] registered taskstats version 1 [ 0.930443] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 0.931579] Key type trusted registered [ 0.936856] Key type encrypted registered [ 0.936863] AppArmor: AppArmor sha1 policy hashing enabled [ 0.936867] ima: No TPM chip found, activating TPM-bypass! [ 0.936884] evm: HMAC attrs: 0x1 [ 0.937209] Magic number: 7:222:428 [ 0.937315] rtc_cmos 00:01: setting system clock to 2015-07-09 11:24:57 UTC (1436441097) [ 0.937406] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.937407] EDD information not available. [ 0.937475] PM: Hibernation image not present or could not be loaded. [ 0.937793] Freeing unused kernel memory: 1412K (ffffffff81d2f000 - ffffffff81e90000) [ 0.937795] Write protecting the kernel read-only data: 12288k [ 0.937973] Freeing unused kernel memory: 128K (ffff8800017e0000 - ffff880001800000) [ 0.938064] Freeing unused kernel memory: 280K (ffff880001bba000 - ffff880001c00000) [ 0.947881] random: systemd-udevd urandom read with 4 bits of entropy available [ 1.189724] ahci 0000:00:1f.2: version 3.0 [ 1.189943] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1 impl SATA mode [ 1.189949] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst [ 1.191112] scsi host0: ahci [ 1.191422] scsi host1: ahci [ 1.191667] scsi host2: ahci [ 1.191946] scsi host3: ahci [ 1.195772] scsi host4: ahci [ 1.195988] scsi host5: ahci [ 1.196061] ata1: SATA max UDMA/133 abar m2048@0xd0518000 port 0xd0518100 irq 25 [ 1.196064] ata2: DUMMY [ 1.196065] ata3: DUMMY [ 1.196066] ata4: DUMMY [ 1.196068] ata5: DUMMY [ 1.196069] ata6: DUMMY [ 1.199751] usb 1-2: new high-speed USB device number 2 using xhci_hcd [ 1.215767] usb 3-1: new high-speed USB device number 2 using ehci-pci [ 1.231767] usb 4-1: new high-speed USB device number 2 using ehci-pci [ 1.348524] usb 3-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.348527] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.348830] hub 3-1:1.0: USB hub found [ 1.348928] hub 3-1:1.0: 6 ports detected [ 1.364394] usb 4-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.364397] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.364698] hub 4-1:1.0: USB hub found [ 1.364810] hub 4-1:1.0: 8 ports detected [ 1.397290] usb 1-2: New USB device found, idVendor=0b95, idProduct=7720 [ 1.397311] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.397313] usb 1-2: Product: AX88x72A [ 1.397314] usb 1-2: Manufacturer: ASIX Elec. Corp. [ 1.397316] usb 1-2: SerialNumber: 000001 [ 1.515952] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.516574] ata1.00: ATA-8: SAMSUNG SSD PM830 mSATA 128GB, CXM12D1Q, max UDMA/133 [ 1.516597] ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.517089] ata1.00: configured for UDMA/133 [ 1.517312] scsi 0:0:0:0: Direct-Access ATA SAMSUNG SSD PM83 2D1Q PQ: 0 ANSI: 5 [ 1.517714] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB) [ 1.517721] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.517812] sd 0:0:0:0: [sda] Write Protect is off [ 1.517816] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.517860] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.518726] sda: sda1 sda2 sda3 [ 1.519127] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.620184] usb 3-1.5: new high-speed USB device number 3 using ehci-pci [ 1.624367] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 1.640031] usb 4-1.5: new full-speed USB device number 3 using ehci-pci [ 1.667953] tsc: Refined TSC clocksource calibration: 1696.151 MHz [ 1.710191] systemd[1]: Inserted module 'autofs4' [ 1.710995] systemd[1]: Failed to insert module 'kdbus': Function not implemented [ 1.717369] systemd[1]: systemd 222 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT -GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN) [ 1.717492] systemd[1]: Detected architecture x86-64. [ 1.717706] systemd[1]: Set hostname to . [ 1.736245] usb 4-1.5: New USB device found, idVendor=8087, idProduct=07da [ 1.736267] usb 4-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.789133] usb 3-1.5: New USB device found, idVendor=0c45, idProduct=644d [ 1.789137] usb 3-1.5: New USB device strings: Mfr=2, Product=1, SerialNumber=0 [ 1.789139] usb 3-1.5: Product: Laptop_Integrated_Webcam_1.3M [ 1.789140] usb 3-1.5: Manufacturer: 4437E62E241F-C10D-0F1023 [ 1.837545] systemd[1]: Reached target Remote File Systems (Pre). [ 1.837556] systemd[1]: Starting Remote File Systems (Pre). [ 1.837570] systemd[1]: Reached target User and Group Name Lookups. [ 1.837577] systemd[1]: Starting User and Group Name Lookups. [ 1.837675] systemd[1]: Created slice Root Slice. [ 1.837683] systemd[1]: Starting Root Slice. [ 1.837723] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 1.837731] systemd[1]: Starting /dev/initctl Compatibility Named Pipe. [ 1.837776] systemd[1]: Listening on Journal Socket. [ 1.837789] systemd[1]: Starting Journal Socket. [ 1.838192] systemd[1]: Created slice User and Session Slice. [ 1.838200] systemd[1]: Starting User and Session Slice. [ 1.838230] systemd[1]: Listening on fsck to fsckd communication Socket. [ 1.838237] systemd[1]: Starting fsck to fsckd communication Socket. [ 1.838272] systemd[1]: Listening on udev Control Socket. [ 1.838279] systemd[1]: Starting udev Control Socket. [ 1.838355] systemd[1]: Listening on Journal Audit Socket. [ 1.838362] systemd[1]: Starting Journal Audit Socket. [ 1.838386] systemd[1]: Listening on udev Kernel Socket. [ 1.838392] systemd[1]: Starting udev Kernel Socket. [ 1.838423] systemd[1]: Listening on Journal Socket (/dev/log). [ 1.838429] systemd[1]: Starting Journal Socket (/dev/log). [ 1.838471] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 1.838478] systemd[1]: Starting Forward Password Requests to Wall Directory Watch. [ 1.838598] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 1.838607] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point. [ 1.838917] systemd[1]: Created slice System Slice. [ 1.838931] systemd[1]: Starting System Slice. [ 1.839602] systemd[1]: Starting Uncomplicated firewall... [ 1.840427] systemd[1]: Starting Setup Virtual Console... [ 1.841453] systemd[1]: Started Read required files in advance. [ 1.841606] systemd[1]: Starting Read required files in advance... [ 1.842560] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 1.842609] systemd[1]: Reached target Slices. [ 1.842634] systemd[1]: Starting Slices. [ 1.845861] systemd[1]: Started Set Up Additional Binary Formats. [ 1.846881] systemd[1]: Starting Increase datagram queue length... [ 1.847847] systemd[1]: Mounting Huge Pages File System... [ 1.848736] systemd[1]: Starting udev Coldplug all Devices... [ 1.849527] systemd[1]: Started Braille Device Support. [ 1.849597] systemd[1]: Starting Braille Device Support... [ 1.850659] systemd[1]: Mounting Debug File System... [ 1.858015] systemd[1]: Starting Load Kernel Modules... [ 1.859146] systemd[1]: Mounting POSIX Message Queue File System... [ 1.859192] systemd[1]: Reached target Encrypted Volumes. [ 1.859211] systemd[1]: Starting Encrypted Volumes. [ 1.859619] systemd[1]: Created slice system-getty.slice. [ 1.859633] systemd[1]: Starting system-getty.slice. [ 1.861157] systemd[1]: Mounted Debug File System. [ 1.861899] systemd[1]: Mounted POSIX Message Queue File System. [ 1.861933] systemd[1]: Mounted Huge Pages File System. [ 1.862736] systemd[1]: Started Uncomplicated firewall. [ 1.863680] systemd[1]: Started Setup Virtual Console. [ 1.864477] systemd[1]: Started Create list of required static device nodes for the current kernel. [ 1.865226] systemd[1]: Started Increase datagram queue length. [ 1.875146] lp: driver loaded but no devices found [ 1.880935] ppdev: user-space parallel port driver [ 1.885677] systemd[1]: Started Load Kernel Modules. [ 1.894626] systemd[1]: Starting Apply Kernel Variables... [ 1.895896] systemd[1]: Mounting FUSE Control File System... [ 1.895991] systemd[1]: Mounted Configuration File System. [ 1.896099] systemd[1]: Listening on Syslog Socket. [ 1.896125] systemd[1]: Starting Syslog Socket. [ 1.897418] systemd[1]: Starting Journal Service... [ 1.899581] systemd[1]: Starting Create Static Device Nodes in /dev... [ 1.901525] systemd[1]: Mounted FUSE Control File System. [ 1.902557] systemd[1]: Started Apply Kernel Variables. [ 1.916192] systemd[1]: Started Create Static Device Nodes in /dev. [ 1.917991] systemd[1]: Starting udev Kernel Device Manager... [ 1.934393] systemd[1]: Started Journal Service. [ 1.991758] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 2.023265] systemd-journald[246]: Received request to flush runtime journal from PID 1 [ 2.080367] audit: type=1305 audit(1436441098.640:2): audit_pid=270 old=0 auid=4294967295 ses=4294967295 res=1 [ 2.148100] input: CyPS/2 Cypress Trackpad as /devices/platform/i8042/serio1/input/input6 [ 2.367577] wmi: Mapper loaded [ 2.379584] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 2.380100] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20150204/utaddress-254) [ 2.380108] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 2.380116] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150204/utaddress-254) [ 2.380122] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB_.IAOE.GPIO) (20150204/utaddress-254) [ 2.380127] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 2.380128] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150204/utaddress-254) [ 2.380133] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB_.IAOE.GPIO) (20150204/utaddress-254) [ 2.380138] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 2.380140] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150204/utaddress-254) [ 2.380145] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB_.IAOE.GPIO) (20150204/utaddress-254) [ 2.380149] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 2.380151] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 2.400260] [drm] Initialized drm 1.1.0 20060810 [ 2.422813] cfg80211: Calling CRDA to update world regulatory domain [ 2.432244] media: Linux media interface: v0.10 [ 2.438363] Intel(R) Wireless WiFi driver for Linux [ 2.438367] Copyright(c) 2003- 2014 Intel Corporation [ 2.438584] iwlwifi 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control [ 2.440786] Bluetooth: Core ver 2.20 [ 2.440801] NET: Registered protocol family 31 [ 2.440803] Bluetooth: HCI device and connection manager initialized [ 2.440808] Bluetooth: HCI socket layer initialized [ 2.440811] Bluetooth: L2CAP socket layer initialized [ 2.440818] Bluetooth: SCO socket layer initialized [ 2.441006] Linux video capture interface: v2.00 [ 2.448218] iwlwifi 0000:01:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm [ 2.454978] usbcore: registered new interface driver btusb [ 2.506611] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUG disabled [ 2.506615] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUGFS enabled [ 2.506617] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled [ 2.506620] iwlwifi 0000:01:00.0: Detected Intel(R) Centrino(R) Advanced-N 6235 AGN, REV=0xB0 [ 2.506774] iwlwifi 0000:01:00.0: L1 Enabled - LTR Disabled [ 2.515882] random: nonblocking pool is initialized [ 2.521497] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_1.3M (0c45:644d) [ 2.542207] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 2.544870] intel_rapl: Found RAPL domain package [ 2.544874] intel_rapl: Found RAPL domain core [ 2.544876] intel_rapl: Found RAPL domain uncore [ 2.547467] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 2.548607] [drm] Memory usable by graphics device = 2048M [ 2.548612] checking generic (c0000000 410000) vs hw (c0000000 10000000) [ 2.548614] fb: switching to inteldrmfb from VESA VGA [ 2.548645] Console: switching to colour dummy device 80x25 [ 2.548717] [drm] Replacing VGA console driver [ 2.549923] input: Laptop_Integrated_Webcam_1.3M as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.5/3-1.5:1.0/input/input7 [ 2.552004] usbcore: registered new interface driver uvcvideo [ 2.552007] USB Video Class driver (1.1.1) [ 2.572426] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.572429] [drm] Driver supports precise vblank timestamp query. [ 2.572510] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 2.588402] input: Dell WMI hotkeys as /devices/virtual/input/input8 [ 2.598459] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 2.603989] acpi device:2d: registered as cooling_device5 [ 2.604111] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9 [ 2.604204] [drm] Initialized i915 1.6.0 20150130 for 0000:00:02.0 on minor 0 [ 2.630260] cfg80211: World regulatory domain updated: [ 2.630264] cfg80211: DFS Master region: unset [ 2.630265] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 2.630267] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 2.630269] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 2.630270] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 2.630272] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 2.630274] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 2.630275] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 2.630277] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 2.630278] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 2.640889] sound hdaudioC0D0: autoconfig for ALC3260: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 2.640893] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 2.640895] sound hdaudioC0D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0) [ 2.640896] sound hdaudioC0D0: mono: mono_out=0x0 [ 2.640897] sound hdaudioC0D0: inputs: [ 2.640899] sound hdaudioC0D0: Mic=0x18 [ 2.640901] sound hdaudioC0D0: Internal Mic=0x12 [ 2.650333] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 2.650428] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 2.650520] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 2.668415] [drm] GMBUS [i915 gmbus vga] timed out, falling back to bit banging on pin 2 [ 2.684457] Switched to clocksource tsc [ 2.720206] Adding 7498068k swap on /dev/sda3. Priority:-1 extents:1 across:7498068k SSFS [ 2.897966] cgroup: new mount options do not match the existing superblock, will be ignored [ 2.967720] fbcon: inteldrmfb (fb0) is primary device [ 2.967836] Console: switching to colour frame buffer device 170x48 [ 2.967869] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 2.967871] i915 0000:00:02.0: registered panic notifier [ 2.991213] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.991217] Bluetooth: BNEP filters: protocol multicast [ 2.991222] Bluetooth: BNEP socket layer initialized [ 3.004188] Bluetooth: RFCOMM TTY layer initialized [ 3.004196] Bluetooth: RFCOMM socket layer initialized [ 3.004202] Bluetooth: RFCOMM ver 1.11 [ 3.058186] rfkill: input handler disabled [ 3.198744] iwlwifi 0000:01:00.0: L1 Enabled - LTR Disabled [ 3.205565] iwlwifi 0000:01:00.0: Radio type=0x2-0x1-0x0 [ 3.213023] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.400074] [drm:intel_set_pch_fifo_underrun_reporting [i915]] *ERROR* uncleared pch fifo underrun on pch transcoder A [ 3.400099] [drm:intel_pch_fifo_underrun_irq_handler [i915]] *ERROR* PCH transcoder A FIFO underrun [ 3.477248] iwlwifi 0000:01:00.0: L1 Enabled - LTR Disabled [ 3.483895] iwlwifi 0000:01:00.0: Radio type=0x2-0x1-0x0 [ 3.564958] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 3.610230] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 4.375389] asix 1-2:1.0 eth0: register 'asix' at usb-0000:00:14.0-2, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:d3:5b:6c [ 4.375588] usbcore: registered new interface driver asix [ 4.393701] asix 1-2:1.0 eth0: link down [ 6.210916] asix 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 16.711951] asix 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 20.169488] asix 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 28.621378] asix 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 43.860755] asix 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 45.653453] asix 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 47.958094] asix 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 60.123684] asix 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 70.368580] asix 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 90.345328] asix 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 102.766983] asix 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 116.469272] asix 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 131.964528] asix 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 139.392953] asix 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 142.465039] asix 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 167.820834] asix 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 175.248229] asix 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 189.590854] asix 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 207.519853] asix 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 209.823990] asix 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 231.209676] asix 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 235.819759] asix 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 248.113368] asix 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 263.224116] asix 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 289.221008] asix 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 324.179971] asix 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 337.627057] asix 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 351.584438] asix 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 358.883751] asix 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 360.804606] asix 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 362.725476] asix 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 364.902450] asix 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 367.591714] asix 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 369.512585] asix 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 371.433457] asix 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 375.275298] asix 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 377.580210] asix 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 380.012725] asix 1-2:1.0 eth0: link down [ 382.062266] asix 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 384.111192] asix 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 386.032071] asix 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 765.212488] asix 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 767.133228] asix 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 767.389474] asix 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 946.542684] asix 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 948.719483] asix 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 948.975676] asix 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 950.768688] asix 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 952.688933] asix 1-2:1.0 eth0: link down [ 954.609881] asix 1-2:1.0 eth0: link down [ 956.274922] asix 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 958.451640] asix 1-2:1.0 eth0: link down [ 960.244456] asix 1-2:1.0 eth0: link down [ 962.037392] asix 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 962.293562] asix 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 964.471085] asix 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 966.391913] asix 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 968.185628] asix 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 970.618993] asix 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 973.180128] asix 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 975.100799] asix 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 976.892593] asix 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 978.813438] asix 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 980.989925] asix 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 982.910795] asix 1-2:1.0 eth0: link down [ 984.703278] asix 1-2:1.0 eth0: link down [ 986.497008] asix 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 988.545663] asix 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 990.850998] asix 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 992.899360] asix 1-2:1.0 eth0: link down [ 994.692720] asix 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 998.919729] asix 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 1044.508359] asix 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 1046.300126] asix 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 1048.220483] asix 1-2:1.0 eth0: link down [ 1050.141890] asix 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 1052.318831] asix 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 1054.367775] asix 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 1301.777222] asix 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 1303.568927] asix 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 1305.361867] asix 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 1307.282585] asix 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 1307.538439] asix 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 1309.460921] asix 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 1614.750548] asix 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 1617.054951] asix 1-2:1.0 eth0: link down [ 1618.848343] asix 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 1685.310049] asix 1-2:1.0 eth0: link down [ 1687.102604] asix 1-2:1.0 eth0: link down [ 1688.895451] asix 1-2:1.0 eth0: link down [ 1692.481941] asix 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 1694.273868] asix 1-2:1.0 eth0: link down [ 1697.988689] asix 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 1700.164784] asix 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 1703.750647] asix 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 1705.543535] asix 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 1708.745490] asix 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 1710.793422] asix 1-2:1.0 eth0: link down [ 1712.458223] asix 1-2:1.0 eth0: link down [ 1714.252141] asix 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 1717.837094] asix 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 1720.655170] asix 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 1723.087545] asix 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 1725.521252] asix 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 1728.466849] asix 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 1731.026588] asix 1-2:1.0 eth0: link down [ 1732.819616] asix 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 1734.996586] asix 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 1836.802859] asix 1-2:1.0 eth0: link down [ 1838.595732] asix 1-2:1.0 eth0: link down [ 1840.516913] asix 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 1842.821878] asix 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 1844.998852] asix 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 1847.304340] asix 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 1849.352879] asix 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 1852.042099] asix 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 1855.115598] asix 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 1857.036415] asix 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 1859.085395] asix 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 1862.158010] asix 1-2:1.0 eth0: link down [ 1863.950826] asix 1-2:1.0 eth0: link down [ 1865.744645] asix 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 1867.664672] asix 1-2:1.0 eth0: link down [ 1869.457323] asix 1-2:1.0 eth0: link down [ 1871.250675] asix 1-2:1.0 eth0: link down [ 1873.018130] usb 1-2: USB disconnect, device number 2 [ 1873.018395] asix 1-2:1.0 eth0: unregister 'asix' usb-0000:00:14.0-2, ASIX AX88772 USB 2.0 Ethernet [ 1875.919772] usb 1-2: new high-speed USB device number 3 using xhci_hcd [ 1876.117166] usb 1-2: New USB device found, idVendor=0b95, idProduct=7720 [ 1876.117176] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1876.117181] usb 1-2: Product: AX88x72A [ 1876.117185] usb 1-2: Manufacturer: ASIX Elec. Corp. [ 1876.117189] usb 1-2: SerialNumber: 000001 [ 1876.910409] asix 1-2:1.0 eth0: register 'asix' at usb-0000:00:14.0-2, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:d3:5b:6c [ 1877.983213] asix 1-2:1.0 eth0: link down [ 1878.778780] asix 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [10957.265835] IPv6: ADDRCONF(NETDEV_UP): vethW4CHDP: link is not ready [10957.266115] device vethW4CHDP entered promiscuous mode [10957.266174] lxcbr0: port 1(vethW4CHDP) entered forwarding state [10957.266182] lxcbr0: port 1(vethW4CHDP) entered forwarding state [10957.285177] eth0: renamed from vethW4CHDPp [10957.304871] lxcbr0: port 1(vethW4CHDP) entered disabled state [10957.321346] IPv6: ADDRCONF(NETDEV_CHANGE): vethW4CHDP: link becomes ready [10957.321396] lxcbr0: port 1(vethW4CHDP) entered forwarding state [10957.321414] lxcbr0: port 1(vethW4CHDP) entered forwarding state [10972.355338] lxcbr0: port 1(vethW4CHDP) entered forwarding state [10997.920082] lxcbr0: port 1(vethW4CHDP) entered disabled state [10997.924418] device vethW4CHDP left promiscuous mode [10997.924445] lxcbr0: port 1(vethW4CHDP) entered disabled state [11156.728264] IPv6: ADDRCONF(NETDEV_UP): veth1Y07GA: link is not ready [11156.728776] device veth1Y07GA entered promiscuous mode [11156.728957] lxcbr0: port 1(veth1Y07GA) entered forwarding state [11156.728978] lxcbr0: port 1(veth1Y07GA) entered forwarding state [11156.729088] lxcbr0: port 1(veth1Y07GA) entered disabled state [11156.749863] eth0: renamed from veth1Y07GAp [11156.785805] IPv6: ADDRCONF(NETDEV_CHANGE): veth1Y07GA: link becomes ready [11156.785886] lxcbr0: port 1(veth1Y07GA) entered forwarding state [11156.785913] lxcbr0: port 1(veth1Y07GA) entered forwarding state [11171.835355] lxcbr0: port 1(veth1Y07GA) entered forwarding state [11487.494187] lxcbr0: port 1(veth1Y07GA) entered disabled state [11489.963356] lxcbr0: port 1(veth1Y07GA) entered disabled state [11489.964568] device veth1Y07GA left promiscuous mode [11489.964582] lxcbr0: port 1(veth1Y07GA) entered disabled state [12084.588422] IPv6: ADDRCONF(NETDEV_UP): vethDQS5I0: link is not ready [12084.588609] device vethDQS5I0 entered promiscuous mode [12084.588656] lxcbr0: port 1(vethDQS5I0) entered forwarding state [12084.588665] lxcbr0: port 1(vethDQS5I0) entered forwarding state [12084.612431] eth0: renamed from vethDQS5I0p [12084.636503] lxcbr0: port 1(vethDQS5I0) entered disabled state [12084.662690] IPv6: ADDRCONF(NETDEV_CHANGE): vethDQS5I0: link becomes ready [12084.662745] lxcbr0: port 1(vethDQS5I0) entered forwarding state [12084.662762] lxcbr0: port 1(vethDQS5I0) entered forwarding state [12099.698633] lxcbr0: port 1(vethDQS5I0) entered forwarding state [12134.806835] lxcbr0: port 1(vethDQS5I0) entered disabled state [12134.808510] device vethDQS5I0 left promiscuous mode [12134.808538] lxcbr0: port 1(vethDQS5I0) entered disabled state [12456.335862] IPv6: ADDRCONF(NETDEV_UP): vethYG7PGF: link is not ready [12456.336129] device vethYG7PGF entered promiscuous mode [12456.336183] lxcbr0: port 1(vethYG7PGF) entered forwarding state [12456.336195] lxcbr0: port 1(vethYG7PGF) entered forwarding state [12456.351884] eth0: renamed from vethYG7PGFp [12456.371772] lxcbr0: port 1(vethYG7PGF) entered disabled state [12456.391889] IPv6: ADDRCONF(NETDEV_CHANGE): vethYG7PGF: link becomes ready [12456.391938] lxcbr0: port 1(vethYG7PGF) entered forwarding state [12456.391952] lxcbr0: port 1(vethYG7PGF) entered forwarding state [12456.848710] lxcbr0: port 1(vethYG7PGF) entered disabled state [12456.849852] device vethYG7PGF left promiscuous mode [12456.849867] lxcbr0: port 1(vethYG7PGF) entered disabled state [12478.014410] IPv6: ADDRCONF(NETDEV_UP): veth6BBLRD: link is not ready [12478.014663] device veth6BBLRD entered promiscuous mode [12478.015223] lxcbr0: port 1(veth6BBLRD) entered forwarding state [12478.015237] lxcbr0: port 1(veth6BBLRD) entered forwarding state [12478.037387] lxcbr0: port 1(veth6BBLRD) entered disabled state [12478.037572] eth0: renamed from veth6BBLRDp [12478.076022] IPv6: ADDRCONF(NETDEV_CHANGE): veth6BBLRD: link becomes ready [12478.076074] lxcbr0: port 1(veth6BBLRD) entered forwarding state [12478.076091] lxcbr0: port 1(veth6BBLRD) entered forwarding state [12493.119755] lxcbr0: port 1(veth6BBLRD) entered forwarding state [12508.679333] lxcbr0: port 1(veth6BBLRD) entered disabled state [12508.680973] device veth6BBLRD left promiscuous mode [12508.680993] lxcbr0: port 1(veth6BBLRD) entered disabled state [12609.618207] IPv6: ADDRCONF(NETDEV_UP): vethV8OSOO: link is not ready [12609.618463] device vethV8OSOO entered promiscuous mode [12609.618509] lxcbr0: port 1(vethV8OSOO) entered forwarding state [12609.618518] lxcbr0: port 1(vethV8OSOO) entered forwarding state [12609.639425] lxcbr0: port 1(vethV8OSOO) entered disabled state [12609.639539] eth0: renamed from vethV8OSOOp [12609.684883] IPv6: ADDRCONF(NETDEV_CHANGE): vethV8OSOO: link becomes ready [12609.684934] lxcbr0: port 1(vethV8OSOO) entered forwarding state [12609.684952] lxcbr0: port 1(vethV8OSOO) entered forwarding state [12624.697625] lxcbr0: port 1(vethV8OSOO) entered forwarding state [12642.282849] lxcbr0: port 1(vethV8OSOO) entered disabled state [12642.285593] device vethV8OSOO left promiscuous mode [12642.285618] lxcbr0: port 1(vethV8OSOO) entered disabled state [12730.655426] IPv6: ADDRCONF(NETDEV_UP): vethFE17PH: link is not ready [12730.655703] device vethFE17PH entered promiscuous mode [12730.655755] lxcbr0: port 1(vethFE17PH) entered forwarding state [12730.655767] lxcbr0: port 1(vethFE17PH) entered forwarding state [12730.672671] eth0: renamed from vethFE17PHp [12730.692536] lxcbr0: port 1(vethFE17PH) entered disabled state [12730.718464] IPv6: ADDRCONF(NETDEV_CHANGE): vethFE17PH: link becomes ready [12730.718515] lxcbr0: port 1(vethFE17PH) entered forwarding state [12730.718530] lxcbr0: port 1(vethFE17PH) entered forwarding state [12745.774901] lxcbr0: port 1(vethFE17PH) entered forwarding state [12783.332524] lxcbr0: port 1(vethFE17PH) entered disabled state [12783.334982] device vethFE17PH left promiscuous mode [12783.335002] lxcbr0: port 1(vethFE17PH) entered disabled state [12839.402989] IPv6: ADDRCONF(NETDEV_UP): veth11P9GF: link is not ready [12839.403180] device veth11P9GF entered promiscuous mode [12839.403233] lxcbr0: port 1(veth11P9GF) entered forwarding state [12839.403245] lxcbr0: port 1(veth11P9GF) entered forwarding state [12839.424542] lxcbr0: port 1(veth11P9GF) entered disabled state [12839.424913] eth0: renamed from veth11P9GFp [12839.460695] IPv6: ADDRCONF(NETDEV_CHANGE): veth11P9GF: link becomes ready [12839.460745] lxcbr0: port 1(veth11P9GF) entered forwarding state [12839.460762] lxcbr0: port 1(veth11P9GF) entered forwarding state [12839.877234] lxcbr0: port 1(veth11P9GF) entered disabled state [12839.878199] device veth11P9GF left promiscuous mode [12839.878212] lxcbr0: port 1(veth11P9GF) entered disabled state [12850.167861] IPv6: ADDRCONF(NETDEV_UP): vethT6RMOP: link is not ready [12850.168370] device vethT6RMOP entered promiscuous mode [12850.193480] eth0: renamed from vethT6RMOPp [12850.220605] IPv6: ADDRCONF(NETDEV_CHANGE): vethT6RMOP: link becomes ready [12850.220664] lxcbr0: port 1(vethT6RMOP) entered forwarding state [12850.220680] lxcbr0: port 1(vethT6RMOP) entered forwarding state [12865.251562] lxcbr0: port 1(vethT6RMOP) entered forwarding state [13190.571651] lxcbr0: port 1(vethT6RMOP) entered disabled state [13190.573711] device vethT6RMOP left promiscuous mode [13190.573730] lxcbr0: port 1(vethT6RMOP) entered disabled state [13208.786555] IPv6: ADDRCONF(NETDEV_UP): vethQWRQ5N: link is not ready [13208.786840] device vethQWRQ5N entered promiscuous mode [13208.786890] lxcbr0: port 1(vethQWRQ5N) entered forwarding state [13208.786900] lxcbr0: port 1(vethQWRQ5N) entered forwarding state [13208.803208] eth0: renamed from vethQWRQ5Np [13208.823223] lxcbr0: port 1(vethQWRQ5N) entered disabled state [13208.848310] IPv6: ADDRCONF(NETDEV_CHANGE): vethQWRQ5N: link becomes ready [13208.848368] lxcbr0: port 1(vethQWRQ5N) entered forwarding state [13208.848383] lxcbr0: port 1(vethQWRQ5N) entered forwarding state [13209.284038] lxcbr0: port 1(vethQWRQ5N) entered disabled state [13209.285929] device vethQWRQ5N left promiscuous mode [13209.285955] lxcbr0: port 1(vethQWRQ5N) entered disabled state [13217.553491] IPv6: ADDRCONF(NETDEV_UP): veth3WNGJ7: link is not ready [13217.553767] device veth3WNGJ7 entered promiscuous mode [13217.553821] lxcbr0: port 1(veth3WNGJ7) entered forwarding state [13217.553832] lxcbr0: port 1(veth3WNGJ7) entered forwarding state [13217.570900] lxcbr0: port 1(veth3WNGJ7) entered disabled state [13217.571031] eth0: renamed from veth3WNGJ7p [13217.614653] IPv6: ADDRCONF(NETDEV_CHANGE): veth3WNGJ7: link becomes ready [13217.614702] lxcbr0: port 1(veth3WNGJ7) entered forwarding state [13217.614719] lxcbr0: port 1(veth3WNGJ7) entered forwarding state [13232.645263] lxcbr0: port 1(veth3WNGJ7) entered forwarding state [13245.007712] lxcbr0: port 1(veth3WNGJ7) entered disabled state [13245.009371] device veth3WNGJ7 left promiscuous mode [13245.009387] lxcbr0: port 1(veth3WNGJ7) entered disabled state [14641.969255] IPv6: ADDRCONF(NETDEV_UP): vethP1XV47: link is not ready [14641.969456] device vethP1XV47 entered promiscuous mode [14641.969510] lxcbr0: port 1(vethP1XV47) entered forwarding state [14641.969520] lxcbr0: port 1(vethP1XV47) entered forwarding state [14641.991038] eth0: renamed from vethP1XV47p [14642.010928] lxcbr0: port 1(vethP1XV47) entered disabled state [14642.021527] IPv6: ADDRCONF(NETDEV_CHANGE): vethP1XV47: link becomes ready [14642.021577] lxcbr0: port 1(vethP1XV47) entered forwarding state [14642.021597] lxcbr0: port 1(vethP1XV47) entered forwarding state [14655.284864] lxcbr0: port 1(vethP1XV47) entered disabled state [14655.286534] device vethP1XV47 left promiscuous mode [14655.286552] lxcbr0: port 1(vethP1XV47) entered disabled state [14674.900002] IPv6: ADDRCONF(NETDEV_UP): vethGHPDMW: link is not ready [14674.900190] device vethGHPDMW entered promiscuous mode [14674.900245] lxcbr0: port 1(vethGHPDMW) entered forwarding state [14674.900255] lxcbr0: port 1(vethGHPDMW) entered forwarding state [14674.917123] eth0: renamed from vethGHPDMWp [14674.936918] lxcbr0: port 1(vethGHPDMW) entered disabled state [14674.948867] IPv6: ADDRCONF(NETDEV_CHANGE): vethGHPDMW: link becomes ready [14674.948918] lxcbr0: port 1(vethGHPDMW) entered forwarding state [14674.948934] lxcbr0: port 1(vethGHPDMW) entered forwarding state [14683.029037] lxcbr0: port 1(vethGHPDMW) entered disabled state [14683.030669] device vethGHPDMW left promiscuous mode [14683.030695] lxcbr0: port 1(vethGHPDMW) entered disabled state [14731.492841] IPv6: ADDRCONF(NETDEV_UP): vethOSDQKB: link is not ready [14731.493102] device vethOSDQKB entered promiscuous mode [14731.493177] lxcbr0: port 1(vethOSDQKB) entered forwarding state [14731.493187] lxcbr0: port 1(vethOSDQKB) entered forwarding state [14731.505910] lxcbr0: port 1(vethOSDQKB) entered disabled state [14731.506255] eth0: renamed from vethOSDQKBp [14731.534182] IPv6: ADDRCONF(NETDEV_CHANGE): vethOSDQKB: link becomes ready [14731.534231] lxcbr0: port 1(vethOSDQKB) entered forwarding state [14731.534247] lxcbr0: port 1(vethOSDQKB) entered forwarding state [14746.588211] lxcbr0: port 1(vethOSDQKB) entered forwarding state [14813.530504] lxcbr0: port 1(vethOSDQKB) entered disabled state [14813.532166] device vethOSDQKB left promiscuous mode [14813.532182] lxcbr0: port 1(vethOSDQKB) entered disabled state [16491.559761] IPv6: ADDRCONF(NETDEV_UP): veth1AJ6QQ: link is not ready [16491.560040] device veth1AJ6QQ entered promiscuous mode [16491.560088] lxcbr0: port 1(veth1AJ6QQ) entered forwarding state [16491.560098] lxcbr0: port 1(veth1AJ6QQ) entered forwarding state [16491.573362] lxcbr0: port 1(veth1AJ6QQ) entered disabled state [16491.573929] eth0: renamed from veth1AJ6QQp [16491.607336] IPv6: ADDRCONF(NETDEV_CHANGE): veth1AJ6QQ: link becomes ready [16491.607384] lxcbr0: port 1(veth1AJ6QQ) entered forwarding state [16491.607401] lxcbr0: port 1(veth1AJ6QQ) entered forwarding state [16506.647403] lxcbr0: port 1(veth1AJ6QQ) entered forwarding state [16537.638370] lxcbr0: port 1(veth1AJ6QQ) entered disabled state [16537.641206] device veth1AJ6QQ left promiscuous mode [16537.641224] lxcbr0: port 1(veth1AJ6QQ) entered disabled state [26735.736214] IPv6: ADDRCONF(NETDEV_UP): vethB4WVVM: link is not ready [26735.736509] device vethB4WVVM entered promiscuous mode [26735.736568] lxcbr0: port 1(vethB4WVVM) entered forwarding state [26735.736580] lxcbr0: port 1(vethB4WVVM) entered forwarding state [26735.753556] eth0: renamed from vethB4WVVMp [26735.773442] lxcbr0: port 1(vethB4WVVM) entered disabled state [26735.791852] IPv6: ADDRCONF(NETDEV_CHANGE): vethB4WVVM: link becomes ready [26735.791906] lxcbr0: port 1(vethB4WVVM) entered forwarding state [26735.791925] lxcbr0: port 1(vethB4WVVM) entered forwarding state [26750.847722] lxcbr0: port 1(vethB4WVVM) entered forwarding state [26751.788811] lxcbr0: port 1(vethB4WVVM) entered disabled state [26751.790367] device vethB4WVVM left promiscuous mode [26751.790383] lxcbr0: port 1(vethB4WVVM) entered disabled state [29009.240609] IPv6: ADDRCONF(NETDEV_UP): vethGOC18A: link is not ready [29009.240872] device vethGOC18A entered promiscuous mode [29009.240919] lxcbr0: port 1(vethGOC18A) entered forwarding state [29009.240929] lxcbr0: port 1(vethGOC18A) entered forwarding state [29009.259465] lxcbr0: port 1(vethGOC18A) entered disabled state [29009.259581] eth0: renamed from vethGOC18Ap [29009.307034] IPv6: ADDRCONF(NETDEV_CHANGE): vethGOC18A: link becomes ready [29009.307102] lxcbr0: port 1(vethGOC18A) entered forwarding state [29009.307119] lxcbr0: port 1(vethGOC18A) entered forwarding state [29022.173452] lxcbr0: port 1(vethGOC18A) entered disabled state [29022.174999] device vethGOC18A left promiscuous mode [29022.175013] lxcbr0: port 1(vethGOC18A) entered disabled state [70408.007646] perf interrupt took too long (2505 > 2500), lowering kernel.perf_event_max_sample_rate to 50000