[   30.506325] init: conveyor main process ended, respawning
[   30.535139] init: conveyor main process (1626) terminated with status 1
[   30.535226] init: conveyor main process ended, respawning
[   30.571991] init: conveyor main process (1631) terminated with status 1
[   30.572084] init: conveyor main process ended, respawning
[   30.601778] init: conveyor main process (1636) terminated with status 1
[   30.601850] init: conveyor main process ended, respawning
[   30.629748] init: conveyor main process (1641) terminated with status 1
[   30.629811] init: conveyor main process ended, respawning
[   30.658170] init: conveyor main process (1646) terminated with status 1
[   30.658245] init: conveyor main process ended, respawning
[   30.689882] init: conveyor main process (1651) terminated with status 1
[   30.689944] init: conveyor main process ended, respawning
[   30.718333] init: conveyor main process (1656) terminated with status 1
[   30.718405] init: conveyor main process ended, respawning
[   30.747646] init: conveyor main process (1661) terminated with status 1
[   30.747713] init: conveyor main process ended, respawning
[   30.775940] init: conveyor main process (1666) terminated with status 1
[   30.776006] init: conveyor main process ended, respawning
[   31.018980] init: conveyor main process (1673) terminated with status 1
[   31.019079] init: conveyor respawning too fast, stopped
[   33.189731] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   33.193005] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   33.242511] atl1c 0000:03:00.0: irq 44 for MSI/MSI-X
[   33.261615] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   33.268398] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   35.914838] wlan0: authenticate with 00:24:01:ce:9a:d3
[   35.936142] wlan0: send auth to 00:24:01:ce:9a:d3 (try 1/3)
[   35.938061] wlan0: authenticated
[   35.941537] wlan0: associate with 00:24:01:ce:9a:d3 (try 1/3)
[   35.944886] wlan0: RX AssocResp from 00:24:01:ce:9a:d3 (capab=0x431 status=0 aid=1)
[   35.944971] wlan0: associated
[   35.944989] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   41.488712] Bridge firewalling registered
[   42.144901] ip_tables: (C) 2000-2006 Netfilter Core Team
[   42.931284] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   43.393621] IPv6: ADDRCONF(NETDEV_UP): virbr0: link is not ready
[   49.973938] vboxdrv: Found 4 processor cores.
[   49.974661] vboxdrv: fAsync=0 offMin=0x790 offMax=0x408a
[   49.975007] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[   49.975015] vboxdrv: Successfully loaded version 4.2.10_Ubuntu (interface 0x001a0004).
[   50.322644] vboxpci: IOMMU not found (not registered)
[   52.727936] Ebtables v2.0 registered
[   52.902887] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   54.297306] init: plymouth-stop pre-start process (4578) terminated with status 1
[  352.196695] audit_printk_skb: 9 callbacks suppressed
[  352.196704] type=1400 audit(1368748760.955:39): apparmor="DENIED" operation="mkdir" parent=7702 profile="/usr/lib/telepathy/mission-control-5" name="/var/lib/gdm/.config/libaccounts-glib/" pid=7703 comm="mission-control" requested_mask="c" denied_mask="c" fsuid=113 ouid=113
[  352.217493] type=1400 audit(1368748760.975:40): apparmor="DENIED" operation="mkdir" parent=7702 profile="/usr/lib/telepathy/mission-control-5" name="/var/lib/gdm/.local/share/telepathy/" pid=7703 comm="mission-control" requested_mask="c" denied_mask="c" fsuid=113 ouid=113
[ 7869.325290] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 7869.410275] JFS: nTxBlock = 8192, nTxLock = 65536
[ 7869.527037] NTFS driver 2.1.30 [Flags: R/O MODULE].
[ 7869.697958] QNX4 filesystem 0.2.3 registered.
[10927.708844] atkbd serio0: Unknown key pressed (translated set 2, code 0x55 on isa0060/serio0).
[10927.708857] atkbd serio0: Use 'setkeycodes 55 <keycode>' to make it known.
[10929.181360] atkbd serio0: Unknown key released (translated set 2, code 0x55 on isa0060/serio0).
[10929.181376] atkbd serio0: Use 'setkeycodes 55 <keycode>' to make it known.
[14599.459820] wlan0: deauthenticating from 00:24:01:ce:9a:d3 by local choice (reason=3)
[14599.468466] cfg80211: Calling CRDA to update world regulatory domain
[14599.914054] cfg80211: World regulatory domain updated:
[14599.914068] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[14599.914077] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[14599.914085] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[14599.914092] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[14599.914100] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[14599.914107] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[14602.877180] PM: Syncing filesystems ... done.
[14603.403862] Freezing user space processes ... (elapsed 0.01 seconds) done.
[14603.419565] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[14603.435657] Suspending console(s) (use no_console_suspend to debug)
[14603.436293] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[14603.436439] sd 0:0:0:0: [sda] Stopping disk
[14603.501054] mei 0000:00:16.0: suspend
[14604.144235] PM: suspend of devices complete after 707.727 msecs
[14604.144375] PM: late suspend of devices complete after 0.137 msecs
[14604.176206] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[14604.192312] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[14604.224158] PM: noirq suspend of devices complete after 79.697 msecs
[14604.224400] ACPI: Preparing to enter system sleep state S3
[14604.224609] PM: Saving platform NVS memory
[14604.225567] Disabling non-boot CPUs ...
[14604.328240] smpboot: CPU 1 is now offline
[14604.432348] smpboot: CPU 2 is now offline
[14604.432946] Broke affinity for irq 16
[14604.432955] Broke affinity for irq 17
[14604.432964] Broke affinity for irq 23
[14604.432966] Broke affinity for irq 40
[14604.433975] smpboot: CPU 3 is now offline
[14604.435384] ACPI: Low-level resume complete
[14604.435424] PM: Restoring platform NVS memory
[14604.435910] CPU0: Thermal monitoring handled by SMI
[14604.435935] Enabling non-boot CPUs ...
[14604.435965] smpboot: Booting Node 0 Processor 1 APIC 0x1
[14604.447032] CPU1: Thermal monitoring handled by SMI
[14604.449243] Intel pstate controlling: cpu 1
[14604.449297] CPU1 is up
[14604.449311] smpboot: Booting Node 0 Processor 2 APIC 0x2
[14604.460373] CPU2: Thermal monitoring handled by SMI
[14604.462598] Intel pstate controlling: cpu 2
[14604.462650] CPU2 is up
[14604.462663] smpboot: Booting Node 0 Processor 3 APIC 0x3
[14604.473722] CPU3: Thermal monitoring handled by SMI
[14604.475966] Intel pstate controlling: cpu 3
[14604.476015] CPU3 is up
[14604.479553] ACPI: Waking up from system sleep state S3
[14604.526059] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[14604.558091] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[14604.606349] PM: noirq resume of devices complete after 126.210 msecs
[14604.606479] PM: early resume of devices complete after 0.100 msecs
[14604.606517] i915 0000:00:02.0: setting latency timer to 64
[14604.606562] mei 0000:00:16.0: irq 42 for MSI/MSI-X
[14604.606593] ehci-pci 0000:00:1a.0: setting latency timer to 64
[14604.606806] ahci 0000:00:1f.2: setting latency timer to 64
[14604.606810] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[14604.607715] ath: phy0: ASPM enabled: 0x42
[14604.607806] ehci-pci 0000:00:1d.0: setting latency timer to 64
[14604.613315] [drm] Wrong MCH_SSKPD value: 0x16040307
[14604.613316] [drm] This can cause pipe underruns and display issues.
[14604.613316] [drm] Please upgrade your BIOS to fix this.
[14604.830354] usb 1-1.6: reset full-speed USB device number 4 using ehci-pci
[14604.922631] usb 1-1.6: device firmware changed
[14604.942460] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[14604.949563] ata5.00: configured for UDMA/100
[14604.950431] ata4: SATA link down (SStatus 0 SControl 300)
[14604.970709] toshiba_bluetooth: Re-enabling Toshiba Bluetooth
[14604.994558] usb 1-1.4: reset high-speed USB device number 3 using ehci-pci
[14606.063636] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[14607.204879] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[14607.206610] ata1.00: configured for UDMA/100
[14607.221023] sd 0:0:0:0: [sda] Starting disk
[14607.252342] PM: resume of devices complete after 2643.092 msecs
[14607.252554] Restarting tasks ... done.
[14607.324944] usb 2-1.5: new high-speed USB device number 4 using ehci-pci
[14607.674083] usb 2-1.5: New USB device found, idVendor=0bda, idProduct=0138
[14607.674088] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[14607.674090] usb 2-1.5: Product: USB2.0-CRW
[14607.674092] usb 2-1.5: Manufacturer: Generic
[14607.674094] usb 2-1.5: SerialNumber: 20090516388200000
[14607.680180] usb 1-1.6: USB disconnect, device number 4
[14607.753406] usb 1-1.6: new full-speed USB device number 5 using ehci-pci
[14607.846102] usb 1-1.6: New USB device found, idVendor=0930, idProduct=0215
[14607.846106] usb 1-1.6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[14607.981826] video LNXVIDEO:01: Restoring backlight state
[14608.292878] Initializing USB Mass Storage driver...
[14608.292962] usbcore: registered new interface driver usb-storage
[14608.292965] USB Mass Storage support registered.
[14608.419356] scsi6 : usb-storage 2-1.5:1.0
[14608.419476] usbcore: registered new interface driver ums-realtek
[14608.453110] usb 2-1.5: USB disconnect, device number 4
[14608.719117] usbcore: registered new interface driver ath3k
[14608.929880] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[14608.939073] atl1c 0000:03:00.0: irq 44 for MSI/MSI-X
[14608.956558] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[14608.964829] usb 1-1.6: USB disconnect, device number 5
[14609.295108] usb 1-1.6: new full-speed USB device number 6 using ehci-pci
[14609.388112] usb 1-1.6: New USB device found, idVendor=0cf3, idProduct=3005
[14609.388116] usb 1-1.6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[14610.729142] wlan0: authenticate with 00:24:01:ce:9a:d3
[14610.744473] wlan0: send auth to 00:24:01:ce:9a:d3 (try 1/3)
[14610.746327] wlan0: authenticated
[14610.748501] wlan0: associate with 00:24:01:ce:9a:d3 (try 1/3)
[14610.751839] wlan0: RX AssocResp from 00:24:01:ce:9a:d3 (capab=0x431 status=0 aid=1)
[14610.751896] wlan0: associated
[14610.751907] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[16793.889573] type=1400 audit(1368797282.655:41): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1965 comm="apparmor_parser"
[16793.890031] type=1400 audit(1368797282.655:42): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1965 comm="apparmor_parser"
[23190.840330] usb 2-1.2: new high-speed USB device number 5 using ehci-pci
[23190.933365] usb 2-1.2: New USB device found, idVendor=04e8, idProduct=6860
[23190.933377] usb 2-1.2: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[23190.933383] usb 2-1.2: Product: Galaxy Nexus
[23190.933388] usb 2-1.2: Manufacturer: Samsung
[23190.933393] usb 2-1.2: SerialNumber: 0149C2DC0201500A
[24477.193803] usb 2-1.2: USB disconnect, device number 5
[29319.067760] usb 2-1.2: new high-speed USB device number 6 using ehci-pci
[29319.161073] usb 2-1.2: New USB device found, idVendor=04e8, idProduct=6860
[29319.161084] usb 2-1.2: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[29319.161091] usb 2-1.2: Product: Galaxy Nexus
[29319.161096] usb 2-1.2: Manufacturer: Samsung
[29319.161100] usb 2-1.2: SerialNumber: 0149C2DC0201500A
[31017.998091] usb 2-1.2: USB disconnect, device number 6
[38451.526390] usb 2-1.2: new high-speed USB device number 7 using ehci-pci
[38451.619443] usb 2-1.2: unable to get BOS descriptor
[38451.620676] usb 2-1.2: New USB device found, idVendor=0451, idProduct=d010
[38451.620684] usb 2-1.2: New USB device strings: Mfr=33, Product=37, SerialNumber=0
[38451.620690] usb 2-1.2: Product: OMAP4440
[38451.620695] usb 2-1.2: Manufacturer: Texas Instruments
[38454.846211] usb 2-1.2: USB disconnect, device number 7
[38459.751135] hub 2-1:1.0: connect-debounce failed, port 2 disabled
[39668.910497] usb 1-1.1: new high-speed USB device number 7 using ehci-pci
[39669.004061] usb 1-1.1: unable to get BOS descriptor
[39669.005600] usb 1-1.1: New USB device found, idVendor=0451, idProduct=d010
[39669.005611] usb 1-1.1: New USB device strings: Mfr=33, Product=37, SerialNumber=0
[39669.005617] usb 1-1.1: Product: OMAP4440
[39669.005622] usb 1-1.1: Manufacturer: Texas Instruments
[39672.041765] usb 1-1.1: USB disconnect, device number 7
[39676.142142] hub 1-1:1.0: connect-debounce failed, port 1 disabled
[39898.578565] hub 1-1:1.0: connect-debounce failed, port 1 disabled
[39906.722916] usb 1-1.1: new high-speed USB device number 8 using ehci-pci
[39906.815997] usb 1-1.1: New USB device found, idVendor=04e8, idProduct=6860
[39906.816002] usb 1-1.1: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[39906.816004] usb 1-1.1: Product: Galaxy Nexus
[39906.816006] usb 1-1.1: Manufacturer: Samsung
[39906.816007] usb 1-1.1: SerialNumber: 0149C2DC0201500A
[40365.501604] type=1400 audit(1368820829.635:43): apparmor="STATUS" operation="profile_replace" name="/usr/bin/evince" pid=15090 comm="apparmor_parser"
[40365.502500] type=1400 audit(1368820829.639:44): apparmor="STATUS" operation="profile_replace" name="/usr/bin/evince//sanitized_helper" pid=15090 comm="apparmor_parser"
[40365.503069] type=1400 audit(1368820829.639:45): apparmor="STATUS" operation="profile_replace" name="/usr/bin/evince-previewer" pid=15090 comm="apparmor_parser"
[40365.503531] type=1400 audit(1368820829.639:46): apparmor="STATUS" operation="profile_replace" name="/usr/bin/evince-previewer//sanitized_helper" pid=15090 comm="apparmor_parser"
[40365.503925] type=1400 audit(1368820829.639:47): apparmor="STATUS" operation="profile_replace" name="/usr/bin/evince-thumbnailer" pid=15090 comm="apparmor_parser"
[40365.504244] type=1400 audit(1368820829.639:48): apparmor="STATUS" operation="profile_replace" name="/usr/bin/evince-thumbnailer//sanitized_helper" pid=15090 comm="apparmor_parser"
[40471.816021] traps: nm-applet[24039] general protection ip:7fc27c6e1d2b sp:7fff0cddb210 error:0 in libgtk-3.so.0.800.2[7fc27c4c4000+4c4000]
[51084.789170] traps: gnome-panel[5137] general protection ip:7f5db88dace8 sp:7fff6b78d750 error:0 in libgtk-3.so.0.800.2[7f5db8616000+4c4000]
[51087.883282] traps: gnome-panel[5760] general protection ip:7f14bd33bce8 sp:7ffff52b6510 error:0 in libgtk-3.so.0.800.2[7f14bd077000+4c4000]
[51115.775333] traps: pxgsettings[5324] general protection ip:4014fa sp:7fff42885740 error:0 in pxgsettings[400000+2000]
[51136.947232] traps: gnome-panel[6342] general protection ip:7f25f29c4ce8 sp:7fffe1583e40 error:0 in libgtk-3.so.0.800.2[7f25f2700000+4c4000]
[51151.568986] traps: gnome-panel[6581] general protection ip:7f86fe360ce8 sp:7fff841138f0 error:0 in libgtk-3.so.0.800.2[7f86fe09c000+4c4000]
[51158.900534] traps: pxgsettings[6566] general protection ip:4014fa sp:7fff4f93ce50 error:0 in pxgsettings[400000+2000]
[51195.555239] traps: gnome-panel[7597] general protection ip:7f699911dce8 sp:7fff2589d920 error:0 in libgtk-3.so.0.800.2[7f6998e59000+4c4000]
[51224.399396] traps: gnome-panel[8252] general protection ip:7fdf92ff3ce8 sp:7fff4716d9b0 error:0 in libgtk-3.so.0.800.2[7fdf92d2f000+4c4000]
[51224.578796] traps: pxgsettings[7843] general protection ip:4014fa sp:7fffbf81c510 error:0 in pxgsettings[400000+2000]
[51247.998025] traps: gnome-panel[8708] general protection ip:7fefb71a4ce8 sp:7fffe19cda70 error:0 in libgtk-3.so.0.800.2[7fefb6ee0000+4c4000]
[51248.226276] traps: pxgsettings[8933] general protection ip:4014fa sp:7fffa7ef6ab0 error:0 in pxgsettings[400000+2000]
[51363.337622] traps: pxgsettings[10177] general protection ip:4014fa sp:7fff2e339fe0 error:0 in pxgsettings[400000+2000]
[51363.356282] traps: pxgsettings[10153] general protection ip:4014fa sp:7fff1141a470 error:0 in pxgsettings[400000+2000]
[51363.357241] traps: pxgsettings[10537] general protection ip:4014fa sp:7fffca2f6ca0 error:0 in pxgsettings[400000+2000]
[54753.811995] usb 1-1.1: USB disconnect, device number 8
[56771.861651] usb 2-1.2: new high-speed USB device number 8 using ehci-pci
[56771.955229] usb 2-1.2: New USB device found, idVendor=04e8, idProduct=6860
[56771.955234] usb 2-1.2: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[56771.955237] usb 2-1.2: Product: Galaxy Nexus
[56771.955238] usb 2-1.2: Manufacturer: Samsung
[56771.955240] usb 2-1.2: SerialNumber: 0149C2DC0201500A
[71685.265447] wlan0: deauthenticating from 00:24:01:ce:9a:d3 by local choice (reason=3)
[71685.273710] cfg80211: Calling CRDA to update world regulatory domain
[71685.729131] cfg80211: World regulatory domain updated:
[71685.729136] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[71685.729138] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[71685.729140] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[71685.729142] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[71685.729143] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[71685.729145] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[71687.905143] init: anacron main process (8879) killed by TERM signal
[71688.426968] PM: Syncing filesystems ... done.
[71688.986440] Freezing user space processes ... (elapsed 0.01 seconds) done.
[71689.000837] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[71689.016934] Suspending console(s) (use no_console_suspend to debug)
[71689.017558] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[71689.017706] sd 0:0:0:0: [sda] Stopping disk
[71689.084751] mei 0000:00:16.0: suspend
[71689.685559] PM: suspend of devices complete after 667.814 msecs
[71689.685701] PM: late suspend of devices complete after 0.139 msecs
[71689.717560] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[71689.733640] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[71689.765487] PM: noirq suspend of devices complete after 79.697 msecs
[71689.766160] ACPI: Preparing to enter system sleep state S3
[71689.766375] PM: Saving platform NVS memory
[71689.767386] Disabling non-boot CPUs ...
[71689.768679] smpboot: CPU 1 is now offline
[71689.770483] smpboot: CPU 2 is now offline
[71689.771226] Broke affinity for irq 16
[71689.771236] Broke affinity for irq 17
[71689.771245] Broke affinity for irq 23
[71689.771246] Broke affinity for irq 40
[71689.873518] smpboot: CPU 3 is now offline
[71689.874949] ACPI: Low-level resume complete
[71689.874988] PM: Restoring platform NVS memory
[71689.875479] CPU0: Thermal monitoring handled by SMI
[71689.875499] Enabling non-boot CPUs ...
[71689.875531] smpboot: Booting Node 0 Processor 1 APIC 0x1
[71689.886595] CPU1: Thermal monitoring handled by SMI
[71689.888822] Intel pstate controlling: cpu 1
[71689.888875] CPU1 is up
[71689.888889] smpboot: Booting Node 0 Processor 2 APIC 0x2
[71689.899950] CPU2: Thermal monitoring handled by SMI
[71689.902160] Intel pstate controlling: cpu 2
[71689.902208] CPU2 is up
[71689.902222] smpboot: Booting Node 0 Processor 3 APIC 0x3
[71689.913281] CPU3: Thermal monitoring handled by SMI
[71689.915528] Intel pstate controlling: cpu 3
[71689.915575] CPU3 is up
[71689.919119] ACPI: Waking up from system sleep state S3
[71689.975265] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[71690.007268] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[71690.055538] PM: noirq resume of devices complete after 135.249 msecs
[71690.055666] PM: early resume of devices complete after 0.103 msecs
[71690.055696] i915 0000:00:02.0: setting latency timer to 64
[71690.055778] ehci-pci 0000:00:1a.0: setting latency timer to 64
[71690.055810] ahci 0000:00:1f.2: setting latency timer to 64
[71690.056851] ath: phy0: ASPM enabled: 0x42
[71690.057007] ehci-pci 0000:00:1d.0: setting latency timer to 64
[71690.057093] mei 0000:00:16.0: irq 42 for MSI/MSI-X
[71690.057138] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[71690.062733] [drm] Wrong MCH_SSKPD value: 0x16040307
[71690.062734] [drm] This can cause pipe underruns and display issues.
[71690.062734] [drm] Please upgrade your BIOS to fix this.
[71690.279542] usb 1-1.4: reset high-speed USB device number 3 using ehci-pci
[71690.399641] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[71690.406739] ata5.00: configured for UDMA/100
[71690.407653] ata4: SATA link down (SStatus 0 SControl 300)
[71690.419889] toshiba_bluetooth: Re-enabling Toshiba Bluetooth
[71690.443736] usb 2-1.2: reset high-speed USB device number 8 using ehci-pci
[71690.536086] usb 2-1.2: device firmware changed
[71690.607915] usb 1-1.6: reset full-speed USB device number 6 using ehci-pci
[71690.700174] usb 1-1.6: device firmware changed
[71691.524786] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[71692.577982] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[71692.579918] ata1.00: configured for UDMA/100
[71692.594130] sd 0:0:0:0: [sda] Starting disk
[71692.624134] PM: resume of devices complete after 2565.779 msecs
[71692.624345] Restarting tasks ... done.
[71692.629299] usb 1-1.6: USB disconnect, device number 6
[71692.702060] usb 1-1.6: new full-speed USB device number 9 using ehci-pci
[71692.794781] usb 1-1.6: New USB device found, idVendor=0930, idProduct=0215
[71692.794786] usb 1-1.6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[71692.990662] video LNXVIDEO:01: Restoring backlight state
[71693.094886] usb 2-1.2: USB disconnect, device number 8
[71693.166545] usb 2-1.2: new high-speed USB device number 9 using ehci-pci
[71693.259774] usb 2-1.2: New USB device found, idVendor=18d1, idProduct=4e21
[71693.259785] usb 2-1.2: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[71693.259792] usb 2-1.2: Product: SGH-T959
[71693.259798] usb 2-1.2: Manufacturer: samsung
[71693.259803] usb 2-1.2: SerialNumber: 31330B94A66100EC
[71693.261601] scsi7 : usb-storage 2-1.2:1.0
[71693.330740] usb 2-1.5: new high-speed USB device number 10 using ehci-pci
[71693.682704] usb 2-1.5: New USB device found, idVendor=0bda, idProduct=0138
[71693.682710] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[71693.682714] usb 2-1.5: Product: USB2.0-CRW
[71693.682717] usb 2-1.5: Manufacturer: Generic
[71693.682720] usb 2-1.5: SerialNumber: 20090516388200000
[71693.707382] scsi8 : usb-storage 2-1.5:1.0
[71693.707720] usb 1-1.6: USB disconnect, device number 9
[71693.907326] usb 1-1.6: new full-speed USB device number 10 using ehci-pci
[71694.000285] usb 1-1.6: New USB device found, idVendor=0cf3, idProduct=3005
[71694.000292] usb 1-1.6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[71694.003667] usb 2-1.5: USB disconnect, device number 10
[71694.265725] scsi 7:0:0:0: Direct-Access     Linux    File-CD Gadget   0000 PQ: 0 ANSI: 2
[71694.266190] scsi 7:0:0:1: Direct-Access     Linux    File-CD Gadget   0000 PQ: 0 ANSI: 2
[71694.266393] sd 7:0:0:0: Attached scsi generic sg2 type 0
[71694.266514] sd 7:0:0:1: Attached scsi generic sg3 type 0
[71694.274068] sd 7:0:0:0: [sdb] Attached SCSI removable disk
[71694.274691] sd 7:0:0:1: [sdc] Attached SCSI removable disk
[71694.291762] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[71694.296913] atl1c 0000:03:00.0: irq 44 for MSI/MSI-X
[71694.312394] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[71696.298675] wlan0: authenticate with 00:24:01:ce:9a:d3
[71696.313816] wlan0: send auth to 00:24:01:ce:9a:d3 (try 1/3)
[71696.315773] wlan0: authenticated
[71696.317819] wlan0: associate with 00:24:01:ce:9a:d3 (try 1/3)
[71696.321749] wlan0: RX AssocResp from 00:24:01:ce:9a:d3 (capab=0x431 status=0 aid=2)
[71696.321818] wlan0: associated
[71696.321829] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[72185.812370] type=1400 audit(1368882961.958:49): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=24882 comm="apparmor_parser"
[72185.812837] type=1400 audit(1368882961.958:50): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=24882 comm="apparmor_parser"
[72894.596707] traps: pxgsettings[6083] general protection ip:4014fa sp:7fffac7ed820 error:0 in pxgsettings[400000+2000]
[75643.837301] traps: software-center[7729] trap int3 ip:7fc3a1ff623d sp:7fff848f14c0 error:0
[75672.127436] traps: software-center[8628] trap int3 ip:7f6541cc123d sp:7fff46fd42d0 error:0
[78258.067614] traps: pxgsettings[24640] general protection ip:4014fa sp:7fff593e49a0 error:0 in pxgsettings[400000+2000]
[78373.449655] traps: pxgsettings[27070] general protection ip:4014fa sp:7fff28c630a0 error:0 in pxgsettings[400000+2000]
[78388.884984] traps: pxgsettings[24875] general protection ip:4014fa sp:7fff42de64b0 error:0 in pxgsettings[400000+2000]
[100021.297493] usb 2-1.2: USB disconnect, device number 9
[106608.959530] init: /var/lib/schroot/mount/saucy-amd64-43e912c9-9a02-4580-b995-2c2f730ca311/etc/init: Configuration directory deleted
[106852.275226] init: /var/lib/schroot/mount/saucy-amd64-3911338f-9bc2-4986-862e-b58984a9924c/etc/init: Configuration directory deleted
[107233.449356] traps: pxgsettings[12761] general protection ip:4014fa sp:7fff101afa50 error:0 in pxgsettings[400000+2000]
[107342.242079] traps: pxgsettings[14549] general protection ip:4014fa sp:7ffffb95eac0 error:0 in pxgsettings[400000+2000]
[108125.363264] traps: pxgsettings[23785] general protection ip:4014fa sp:7fff4fbb97b0 error:0 in pxgsettings[400000+2000]
[108601.582168] traps: pxgsettings[12795] general protection ip:4014fa sp:7fffc97260c0 error:0 in pxgsettings[400000+2000]
[108608.343713] traps: unity-panel-ser[12078] general protection ip:7ffe212fa446 sp:7fff1145c7a0 error:0 in libido3-0.1.so.0.0.0[7ffe212f5000+d000]
[108631.060519] init: Failed to spawn plymouth-stop pre-start process: unable to change root directory: No such file or directory
[108631.062241] init: Failed to spawn plymouth-stop pre-start process: unable to change root directory: No such file or directory
[108631.068877] init: Failed to spawn startpar-bridge (hybrid-gfx--started) main process: unable to change root directory: No such file or directory
[108631.070501] init: Failed to spawn startpar-bridge (hybrid-gfx--started) main process: unable to change root directory: No such file or directory
[108631.071977] init: Failed to spawn plymouth-stop pre-start process: unable to change root directory: No such file or directory
[108631.073476] init: Failed to spawn plymouth-stop pre-start process: unable to change root directory: No such file or directory
[108631.080701] init: Failed to spawn startpar-bridge (plymouth-stop--stopped) main process: unable to change root directory: No such file or directory
[108631.082544] init: Failed to spawn startpar-bridge (plymouth-stop--stopped) main process: unable to change root directory: No such file or directory
[108631.092815] init: Failed to spawn startpar-bridge (ubiquity--started) main process: unable to change root directory: No such file or directory
[108631.094317] init: Failed to spawn startpar-bridge (ubiquity--started) main process: unable to change root directory: No such file or directory
[108631.102873] init: Failed to spawn startpar-bridge (ubiquity--stopped) main process: unable to change root directory: No such file or directory
[108631.104599] init: Failed to spawn startpar-bridge (ubiquity--stopped) main process: unable to change root directory: No such file or directory
[108631.219674] init: Failed to spawn startpar-bridge (hybrid-gfx--stopped) main process: unable to change root directory: No such file or directory
[108631.221492] init: Failed to spawn startpar-bridge (hybrid-gfx--stopped) main process: unable to change root directory: No such file or directory
[108636.290982] init: Failed to spawn startpar-bridge (lightdm--started) main process: unable to change root directory: No such file or directory
[108636.292506] init: Failed to spawn startpar-bridge (lightdm--started) main process: unable to change root directory: No such file or directory
[109910.263905] traps: gnome-shell[600] trap stack segment ip:7ff08d712fa3 sp:7fff3cabf810 error:0
[111958.271065] wlan0: deauthenticating from 00:24:01:ce:9a:d3 by local choice (reason=3)
[111958.279672] cfg80211: Calling CRDA to update world regulatory domain
[111958.745807] cfg80211: World regulatory domain updated:
[111958.745811] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[111958.745813] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[111958.745815] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[111958.745816] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[111958.745818] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[111958.745819] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[111960.044458] init: Failed to spawn startpar-bridge (anacron--started) main process: unable to change root directory: No such file or directory
[111960.046076] init: Failed to spawn startpar-bridge (anacron--started) main process: unable to change root directory: No such file or directory
[111960.133545] init: Failed to spawn startpar-bridge (anacron--stopped) main process: unable to change root directory: No such file or directory
[111960.134769] init: Failed to spawn startpar-bridge (anacron--stopped) main process: unable to change root directory: No such file or directory
[111960.761426] PM: Syncing filesystems ... done.
[111961.469166] Freezing user space processes ... (elapsed 0.03 seconds) done.
[111961.501130] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[111961.517210] Suspending console(s) (use no_console_suspend to debug)
[111961.517849] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[111961.518080] sd 0:0:0:0: [sda] Stopping disk
[111961.589498] mei 0000:00:16.0: suspend
[111962.209859] PM: suspend of devices complete after 691.812 msecs
[111962.210001] PM: late suspend of devices complete after 0.140 msecs
[111962.241845] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[111962.257931] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[111962.289776] PM: noirq suspend of devices complete after 79.686 msecs
[111962.290448] ACPI: Preparing to enter system sleep state S3
[111962.290657] PM: Saving platform NVS memory
[111962.291642] Disabling non-boot CPUs ...
[111962.292930] smpboot: CPU 1 is now offline
[111962.294530] smpboot: CPU 2 is now offline
[111962.295250] Broke affinity for irq 16
[111962.295259] Broke affinity for irq 17
[111962.295268] Broke affinity for irq 23
[111962.295270] Broke affinity for irq 40
[111962.397811] smpboot: CPU 3 is now offline
[111962.399278] ACPI: Low-level resume complete
[111962.399317] PM: Restoring platform NVS memory
[111962.399808] CPU0: Thermal monitoring handled by SMI
[111962.399828] Enabling non-boot CPUs ...
[111962.399858] smpboot: Booting Node 0 Processor 1 APIC 0x1
[111962.410923] CPU1: Thermal monitoring handled by SMI
[111962.413146] Intel pstate controlling: cpu 1
[111962.413201] CPU1 is up
[111962.413215] smpboot: Booting Node 0 Processor 2 APIC 0x2
[111962.424276] CPU2: Thermal monitoring handled by SMI
[111962.426493] Intel pstate controlling: cpu 2
[111962.426540] CPU2 is up
[111962.426553] smpboot: Booting Node 0 Processor 3 APIC 0x3
[111962.437612] CPU3: Thermal monitoring handled by SMI
[111962.439866] Intel pstate controlling: cpu 3
[111962.439913] CPU3 is up
[111962.443445] ACPI: Waking up from system sleep state S3
[111962.491543] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[111962.523564] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[111962.571819] PM: noirq resume of devices complete after 127.795 msecs
[111962.571932] PM: early resume of devices complete after 0.089 msecs
[111962.571955] i915 0000:00:02.0: setting latency timer to 64
[111962.572002] mei 0000:00:16.0: irq 42 for MSI/MSI-X
[111962.572076] ahci 0000:00:1f.2: setting latency timer to 64
[111962.572242] ehci-pci 0000:00:1a.0: setting latency timer to 64
[111962.572317] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[111962.572343] ehci-pci 0000:00:1d.0: setting latency timer to 64
[111962.573130] ath: phy0: ASPM enabled: 0x42
[111962.578521] [drm] Wrong MCH_SSKPD value: 0x16040307
[111962.578522] [drm] This can cause pipe underruns and display issues.
[111962.578522] [drm] Please upgrade your BIOS to fix this.
[111962.795990] usb 1-1.6: reset full-speed USB device number 10 using ehci-pci
[111962.888202] usb 1-1.6: device firmware changed
[111962.907926] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[111962.915143] ata5.00: configured for UDMA/100
[111962.915899] ata4: SATA link down (SStatus 0 SControl 300)
[111962.936180] toshiba_bluetooth: Re-enabling Toshiba Bluetooth
[111962.960145] usb 1-1.4: reset high-speed USB device number 3 using ehci-pci
[111964.097170] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[111965.110400] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[111965.112110] ata1.00: configured for UDMA/100
[111965.126396] sd 0:0:0:0: [sda] Starting disk
[111965.154104] PM: resume of devices complete after 2579.467 msecs
[111965.154335] Restarting tasks ... done.
[111965.230439] usb 2-1.5: new high-speed USB device number 11 using ehci-pci
[111965.518832] video LNXVIDEO:01: Restoring backlight state
[111965.582433] usb 2-1.5: New USB device found, idVendor=0bda, idProduct=0138
[111965.582439] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[111965.582443] usb 2-1.5: Product: USB2.0-CRW
[111965.582445] usb 2-1.5: Manufacturer: Generic
[111965.582448] usb 2-1.5: SerialNumber: 20090516388200000
[111965.607968] scsi9 : usb-storage 2-1.5:1.0
[111965.608327] usb 1-1.6: USB disconnect, device number 10
[111965.678908] usb 1-1.6: new full-speed USB device number 11 using ehci-pci
[111965.771627] usb 1-1.6: New USB device found, idVendor=0930, idProduct=0215
[111965.771633] usb 1-1.6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[111966.175968] init: Failed to spawn startpar-bridge (anacron--started) main process: unable to change root directory: No such file or directory
[111966.177394] init: Failed to spawn startpar-bridge (anacron--started) main process: unable to change root directory: No such file or directory
[111966.186701] init: Failed to spawn startpar-bridge (anacron--stopped) main process: unable to change root directory: No such file or directory
[111966.188388] init: Failed to spawn startpar-bridge (anacron--stopped) main process: unable to change root directory: No such file or directory
[111966.308802] usb 2-1.5: USB disconnect, device number 11
[111966.435936] usb 1-1.6: USB disconnect, device number 11
[111966.597112] init: Failed to spawn startpar-bridge (anacron--started) main process: unable to change root directory: No such file or directory
[111966.598923] init: Failed to spawn startpar-bridge (anacron--started) main process: unable to change root directory: No such file or directory
[111966.606649] init: Failed to spawn startpar-bridge (anacron--stopped) main process: unable to change root directory: No such file or directory
[111966.608430] init: Failed to spawn startpar-bridge (anacron--stopped) main process: unable to change root directory: No such file or directory
[111966.720494] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[111966.727907] atl1c 0000:03:00.0: irq 44 for MSI/MSI-X
[111966.745743] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[111966.872166] usb 1-1.6: new full-speed USB device number 12 using ehci-pci
[111966.965749] usb 1-1.6: New USB device found, idVendor=0cf3, idProduct=3005
[111966.965756] usb 1-1.6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[111968.702641] wlan0: authenticate with 00:24:01:ce:9a:d3
[111968.717994] wlan0: send auth to 00:24:01:ce:9a:d3 (try 1/3)
[111968.719922] wlan0: authenticated
[111968.721977] wlan0: associate with 00:24:01:ce:9a:d3 (try 1/3)
[111968.728577] wlan0: RX AssocResp from 00:24:01:ce:9a:d3 (capab=0x431 status=0 aid=2)
[111968.728632] wlan0: associated
[111968.728641] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[111970.805339] init: Failed to spawn mountall-net main process: unable to change root directory: No such file or directory
[111970.806613] init: Failed to spawn mountall-net main process: unable to change root directory: No such file or directory
[111970.811840] init: Failed to spawn startpar-bridge (mountall-net--started) main process: unable to change root directory: No such file or directory
[111970.813187] init: Failed to spawn startpar-bridge (mountall-net--started) main process: unable to change root directory: No such file or directory
[111970.816503] init: Failed to spawn startpar-bridge (mountall-net--stopped) main process: unable to change root directory: No such file or directory
[111970.818002] init: Failed to spawn startpar-bridge (mountall-net--stopped) main process: unable to change root directory: No such file or directory
[111970.832074] init: Failed to spawn startpar-bridge (mountall-net--stopped) main process: unable to change root directory: No such file or directory
[111970.833889] init: Failed to spawn startpar-bridge (mountall-net--stopped) main process: unable to change root directory: No such file or directory
[112237.149169] usb 2-1.2: new high-speed USB device number 12 using ehci-pci
[112237.242120] usb 2-1.2: New USB device found, idVendor=18d1, idProduct=4e21
[112237.242132] usb 2-1.2: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[112237.242138] usb 2-1.2: Product: SGH-T959
[112237.242143] usb 2-1.2: Manufacturer: samsung
[112237.242156] usb 2-1.2: SerialNumber: 31330B94A66100EC
[112237.243215] scsi10 : usb-storage 2-1.2:1.0
[112238.242702] scsi 10:0:0:0: Direct-Access     Linux    File-CD Gadget   0000 PQ: 0 ANSI: 2
[112238.243308] scsi 10:0:0:1: Direct-Access     Linux    File-CD Gadget   0000 PQ: 0 ANSI: 2
[112238.243638] sd 10:0:0:0: Attached scsi generic sg2 type 0
[112238.243816] sd 10:0:0:1: Attached scsi generic sg3 type 0
[112238.251656] sd 10:0:0:1: [sdc] Attached SCSI removable disk
[112238.252885] sd 10:0:0:0: [sdb] Attached SCSI removable disk
[115132.449337] usb 2-1.2: USB disconnect, device number 12
[126679.725698] wlan0: deauthenticating from 00:24:01:ce:9a:d3 by local choice (reason=3)
[126679.733952] cfg80211: Calling CRDA to update world regulatory domain
[126679.787625] cfg80211: World regulatory domain updated:
[126679.787629] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[126679.787632] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[126679.787635] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[126679.787637] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[126679.787639] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[126679.787642] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[126680.101484] init: Failed to spawn startpar-bridge (anacron--started) main process: unable to change root directory: No such file or directory
[126680.102819] init: Failed to spawn startpar-bridge (anacron--started) main process: unable to change root directory: No such file or directory
[126680.164441] init: anacron main process (27317) killed by TERM signal
[126680.168719] init: Failed to spawn startpar-bridge (anacron--stopped) main process: unable to change root directory: No such file or directory
[126680.170318] init: Failed to spawn startpar-bridge (anacron--stopped) main process: unable to change root directory: No such file or directory
[126681.379943] PM: Syncing filesystems ... done.
[126681.647695] Freezing user space processes ... (elapsed 0.01 seconds) done.
[126681.663517] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[126681.679599] Suspending console(s) (use no_console_suspend to debug)
[126681.680213] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[126681.751179] mei 0000:00:16.0: suspend
[126681.765844] sd 0:0:0:0: [sda] Stopping disk
[126682.400091] PM: suspend of devices complete after 719.619 msecs
[126682.400275] PM: late suspend of devices complete after 0.179 msecs
[126682.432251] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[126682.448330] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[126682.480177] PM: noirq suspend of devices complete after 79.813 msecs
[126682.480850] ACPI: Preparing to enter system sleep state S3
[126682.481060] PM: Saving platform NVS memory
[126682.482054] Disabling non-boot CPUs ...
[126682.584213] smpboot: CPU 1 is now offline
[126682.688313] smpboot: CPU 2 is now offline
[126682.688974] Broke affinity for irq 16
[126682.688983] Broke affinity for irq 17
[126682.688992] Broke affinity for irq 23
[126682.688994] Broke affinity for irq 40
[126682.792420] smpboot: CPU 3 is now offline
[126682.793826] ACPI: Low-level resume complete
[126682.793866] PM: Restoring platform NVS memory
[126682.794354] CPU0: Thermal monitoring handled by SMI
[126682.794373] Enabling non-boot CPUs ...
[126682.794405] smpboot: Booting Node 0 Processor 1 APIC 0x1
[126682.805468] CPU1: Thermal monitoring handled by SMI
[126682.807691] Intel pstate controlling: cpu 1
[126682.807744] CPU1 is up
[126682.807759] smpboot: Booting Node 0 Processor 2 APIC 0x2
[126682.818820] CPU2: Thermal monitoring handled by SMI
[126682.821034] Intel pstate controlling: cpu 2
[126682.821082] CPU2 is up
[126682.821095] smpboot: Booting Node 0 Processor 3 APIC 0x3
[126682.832154] CPU3: Thermal monitoring handled by SMI
[126682.834409] Intel pstate controlling: cpu 3
[126682.834457] CPU3 is up
[126682.838002] ACPI: Waking up from system sleep state S3
[126682.886118] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[126682.918131] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[126682.966366] PM: noirq resume of devices complete after 127.758 msecs
[126682.966479] PM: early resume of devices complete after 0.088 msecs
[126682.966504] i915 0000:00:02.0: setting latency timer to 64
[126682.966554] mei 0000:00:16.0: irq 42 for MSI/MSI-X
[126682.966596] ehci-pci 0000:00:1a.0: setting latency timer to 64
[126682.966642] ahci 0000:00:1f.2: setting latency timer to 64
[126682.966803] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[126682.966943] ehci-pci 0000:00:1d.0: setting latency timer to 64
[126682.967735] ath: phy0: ASPM enabled: 0x42
[126682.974134] [drm] Wrong MCH_SSKPD value: 0x16040307
[126682.974135] [drm] This can cause pipe underruns and display issues.
[126682.974135] [drm] Please upgrade your BIOS to fix this.
[126683.190474] usb 1-1.6: reset full-speed USB device number 12 using ehci-pci
[126683.282736] usb 1-1.6: device firmware changed
[126683.302526] ata4: SATA link down (SStatus 0 SControl 300)
[126683.310537] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[126683.317638] ata5.00: configured for UDMA/100
[126683.330781] toshiba_bluetooth: Re-enabling Toshiba Bluetooth
[126683.354639] usb 1-1.4: reset high-speed USB device number 3 using ehci-pci
[126683.991248] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[126685.617006] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[126685.618703] ata1.00: configured for UDMA/100
[126685.633142] sd 0:0:0:0: [sda] Starting disk
[126685.663191] PM: resume of devices complete after 2693.888 msecs
[126685.663399] Restarting tasks ... done.
[126685.737247] usb 2-1.5: new high-speed USB device number 13 using ehci-pci
[126685.842212] usb 2-1.5: New USB device found, idVendor=0bda, idProduct=0138
[126685.842224] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[126685.842231] usb 2-1.5: Product: USB2.0-CRW
[126685.842236] usb 2-1.5: Manufacturer: Generic
[126685.842241] usb 2-1.5: SerialNumber: 20090516388200000
[126685.867771] scsi11 : usb-storage 2-1.5:1.0
[126685.868093] usb 1-1.6: USB disconnect, device number 12
[126685.941302] usb 1-1.6: new full-speed USB device number 13 using ehci-pci
[126686.034169] usb 1-1.6: New USB device found, idVendor=0930, idProduct=0215
[126686.034175] usb 1-1.6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[126686.314961] usb 2-1.5: USB disconnect, device number 13
[126686.398085] video LNXVIDEO:01: Restoring backlight state
[126686.555944] usb 1-1.6: USB disconnect, device number 13
[126686.624605] init: Failed to spawn startpar-bridge (anacron--started) main process: unable to change root directory: No such file or directory
[126686.626315] init: Failed to spawn startpar-bridge (anacron--started) main process: unable to change root directory: No such file or directory
[126686.785489] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[126686.793173] atl1c 0000:03:00.0: irq 44 for MSI/MSI-X
[126686.807942] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[126686.882282] usb 1-1.6: new full-speed USB device number 14 using ehci-pci
[126686.975255] usb 1-1.6: New USB device found, idVendor=0cf3, idProduct=3005
[126686.975261] usb 1-1.6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[126688.552543] wlan0: authenticate with 00:24:01:ce:9a:d3
[126688.567904] wlan0: send auth to 00:24:01:ce:9a:d3 (try 1/3)
[126688.569882] wlan0: authenticated
[126688.572021] wlan0: associate with 00:24:01:ce:9a:d3 (try 1/3)
[126688.575960] wlan0: RX AssocResp from 00:24:01:ce:9a:d3 (capab=0x431 status=0 aid=2)
[126688.576026] wlan0: associated
[126688.576035] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[126690.427728] init: Failed to spawn mountall-net main process: unable to change root directory: No such file or directory
[126690.429314] init: Failed to spawn mountall-net main process: unable to change root directory: No such file or directory
[126690.435827] init: Failed to spawn startpar-bridge (mountall-net--started) main process: unable to change root directory: No such file or directory
[126690.437511] init: Failed to spawn startpar-bridge (mountall-net--started) main process: unable to change root directory: No such file or directory
[126690.441551] init: Failed to spawn startpar-bridge (mountall-net--stopped) main process: unable to change root directory: No such file or directory
[126690.442979] init: Failed to spawn startpar-bridge (mountall-net--stopped) main process: unable to change root directory: No such file or directory
[126690.457252] init: Failed to spawn startpar-bridge (mountall-net--stopped) main process: unable to change root directory: No such file or directory
[126690.459628] init: Failed to spawn startpar-bridge (mountall-net--stopped) main process: unable to change root directory: No such file or directory
[127523.782480] init: Failed to spawn startpar-bridge (cups--stopped) main process: unable to change root directory: No such file or directory
[127523.784067] init: Failed to spawn startpar-bridge (cups--stopped) main process: unable to change root directory: No such file or directory
[127524.777176] type=1400 audit(1368970229.603:51): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=8771 comm="apparmor_parser"
[127524.777633] type=1400 audit(1368970229.603:52): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=8771 comm="apparmor_parser"
[127526.816375] init: Failed to spawn startpar-bridge (cups--started) main process: unable to change root directory: No such file or directory
[127526.817635] init: Failed to spawn startpar-bridge (cups--started) main process: unable to change root directory: No such file or directory