[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-21-generic (buildd@rothera) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #32-Ubuntu SMP Fri Apr 16 08:10:02 UTC 2010 (Ubuntu 2.6.32-21.32-generic 2.6.32.11+drm33.2) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007fef0000 (usable) [ 0.000000] BIOS-e820: 000000007fef0000 - 000000007fef3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007fef3000 - 000000007ff00000 (ACPI data) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.4 present. [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x7fef0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CBFFF write-protect [ 0.000000] CC000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 07FF00000 mask FFFF00000 uncachable [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009f000 (usable) [ 0.000000] modified: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000007fef0000 (usable) [ 0.000000] modified: 000000007fef0000 - 000000007fef3000 (ACPI NVS) [ 0.000000] modified: 000000007fef3000 - 000000007ff00000 (ACPI data) [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000 [ 0.000000] RAMDISK: 372d0000 - 37fef0cd [ 0.000000] Allocated new RAMDISK: 008de000 - 015fd0cd [ 0.000000] Move RAMDISK from 00000000372d0000 - 0000000037fef0cc to 008de000 - 015fd0cc [ 0.000000] ACPI: RSDP 000f77b0 00024 (v02 Nvidia) [ 0.000000] ACPI: XSDT 7fef30c0 00054 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: FACP 7fefa480 000F4 (v03 Nvidia ASUSACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: DSDT 7fef3240 071EB (v01 NVIDIA ASUSACPI 00001000 MSFT 03000000) [ 0.000000] ACPI: FACS 7fef0000 00040 [ 0.000000] ACPI: HPET 7fefa6c0 00038 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000098) [ 0.000000] ACPI: MCFG 7fefa740 0003C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: APIC 7fefa5c0 0008E (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: SSDT 7fefa7c0 00231 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: SSDT 7fefad20 0016F (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 1158MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00011000 - 00017f00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008d9e98] TEXT DATA BSS ==> [0000100000 - 00008d9e98] [ 0.000000] #4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] [ 0.000000] #5 [00008da000 - 00008dd149] BRK ==> [00008da000 - 00008dd149] [ 0.000000] #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000] [ 0.000000] #7 [00008de000 - 00015fd0cd] NEW RAMDISK ==> [00008de000 - 00015fd0cd] [ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000] [ 0.000000] found SMP MP-table at [c00f5cc0] f5cc0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0007fef0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0007fef0 [ 0.000000] On node 0 totalpages: 523903 [ 0.000000] free_area_init_node: node 0, pgdat c0798720, node_mem_map c15ff200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2318 pages used for memmap [ 0.000000] HighMem zone: 294372 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfeff0000 [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 7ff00000 (gap: 7ff00000:60100000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c2800000 s36024 r0 d21320 u1048576 [ 0.000000] pcpu-alloc: s36024 r0 d21320 u1048576 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519809 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-21-generic root=UUID=8f13113d-ae6a-43f3-b649-4ccf51d4bc05 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 10480000 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:0007fef0) [ 0.000000] Memory: 2045236k/2096064k available (4673k kernel code, 49200k reserved, 2122k data, 656k init, 1186760k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc07a3000 - 0xc0847000 ( 656 kB) [ 0.000000] .data : 0xc0590613 - 0xc07a2e48 (2122 kB) [ 0.000000] .text : 0xc0100000 - 0xc0590613 (4673 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:440 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2000.346 MHz processor. [ 0.004007] Calibrating delay loop (skipped), value calculated using timer frequency.. 4000.69 BogoMIPS (lpj=8001384) [ 0.004025] Security Framework initialized [ 0.004049] AppArmor: AppArmor initialized [ 0.004056] Mount-cache hash table entries: 512 [ 0.004195] Initializing cgroup subsys ns [ 0.004200] Initializing cgroup subsys cpuacct [ 0.004204] Initializing cgroup subsys memory [ 0.004212] Initializing cgroup subsys devices [ 0.004214] Initializing cgroup subsys freezer [ 0.004216] Initializing cgroup subsys net_cls [ 0.004237] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004240] CPU: L2 cache: 2048K [ 0.004243] CPU: Physical Processor ID: 0 [ 0.004245] CPU: Processor Core ID: 0 [ 0.004249] mce: CPU supports 6 MCE banks [ 0.004259] CPU0: Thermal monitoring enabled (TM2) [ 0.004262] using mwait in idle threads. [ 0.004270] Performance Events: Core2 events, Intel PMU driver. [ 0.004279] ... version: 2 [ 0.004281] ... bit width: 40 [ 0.004283] ... generic registers: 2 [ 0.004285] ... value mask: 000000ffffffffff [ 0.004287] ... max period: 000000007fffffff [ 0.004289] ... fixed-purpose events: 3 [ 0.004291] ... event mask: 0000000700000003 [ 0.004296] Checking 'hlt' instruction... OK. [ 0.022781] ACPI: Core revision 20090903 [ 0.035591] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.035597] ftrace: allocating 21771 entries in 43 pages [ 0.036075] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.036507] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 [ 0.044001] ..MP-BIOS bug: 8254 timer not connected to IO-APIC [ 0.044001] ...trying to set up timer (IRQ0) through the 8259A ... [ 0.044001] ..... (found apic 0 pin 0) ... [ 0.085712] ....... works. [ 0.085714] CPU0: Intel(R) Core(TM)2 CPU 4400 @ 2.00GHz stepping 02 [ 0.088001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.008000] Initializing CPU#1 [ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.008000] CPU: L2 cache: 2048K [ 0.008000] CPU: Physical Processor ID: 0 [ 0.008000] CPU: Processor Core ID: 1 [ 0.008000] CPU1: Thermal monitoring enabled (TM2) [ 0.172064] CPU1: Intel(R) Core(TM)2 CPU 4400 @ 2.00GHz stepping 02 [ 0.172077] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.176024] Brought up 2 CPUs [ 0.176027] Total of 2 processors activated (8000.71 BogoMIPS). [ 0.176483] CPU0 attaching sched-domain: [ 0.176487] domain 0: span 0-1 level MC [ 0.176490] groups: 0 1 [ 0.176496] CPU1 attaching sched-domain: [ 0.176498] domain 0: span 0-1 level MC [ 0.176501] groups: 1 0 [ 0.176611] devtmpfs: initialized [ 0.176611] regulator: core version 0.5 [ 0.176611] Time: 20:04:24 Date: 09/07/10 [ 0.176611] NET: Registered protocol family 16 [ 0.176611] Trying to unpack rootfs image as initramfs... [ 0.176611] EISA bus registered [ 0.176611] ACPI: bus type pci registered [ 0.176611] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.176611] PCI: MCFG area at e0000000 reserved in E820 [ 0.176611] PCI: Using MMCONFIG for extended config space [ 0.176611] PCI: Using configuration type 1 for base access [ 0.180107] bio: create slab at 0 [ 0.181473] ACPI: EC: Look up EC in DSDT [ 0.191406] ACPI: Interpreter enabled [ 0.191420] ACPI: (supports S0 S1 S3 S4 S5) [ 0.191450] ACPI: Using IOAPIC for interrupt routing [ 0.201726] ACPI: No dock devices found. [ 0.201826] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.202326] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.202330] pci 0000:00:02.0: PME# disabled [ 0.202387] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.202390] pci 0000:00:04.0: PME# disabled [ 0.202443] pci 0000:00:05.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.202447] pci 0000:00:05.0: PME# disabled [ 0.202497] pci 0000:00:06.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.202501] pci 0000:00:06.0: PME# disabled [ 0.202551] pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.202555] pci 0000:00:07.0: PME# disabled [ 0.202843] pci 0000:00:0a.1: reg 20 io port: [0x5000-0x503f] [ 0.202851] pci 0000:00:0a.1: reg 24 io port: [0x5100-0x513f] [ 0.202881] pci 0000:00:0a.1: PME# supported from D3hot D3cold [ 0.202887] pci 0000:00:0a.1: PME# disabled [ 0.202977] pci 0000:00:0b.0: reg 10 32bit mmio: [0xda006000-0xda006fff] [ 0.203018] pci 0000:00:0b.0: supports D1 D2 [ 0.203020] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.203025] pci 0000:00:0b.0: PME# disabled [ 0.203063] pci 0000:00:0b.1: reg 10 32bit mmio: [0xda007000-0xda0070ff] [ 0.203108] pci 0000:00:0b.1: supports D1 D2 [ 0.203111] pci 0000:00:0b.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.203115] pci 0000:00:0b.1: PME# disabled [ 0.203171] pci 0000:00:0d.0: reg 20 io port: [0xf000-0xf00f] [ 0.203232] pci 0000:00:0e.0: reg 10 io port: [0x9f0-0x9f7] [ 0.203239] pci 0000:00:0e.0: reg 14 io port: [0xbf0-0xbf3] [ 0.203245] pci 0000:00:0e.0: reg 18 io port: [0x970-0x977] [ 0.203251] pci 0000:00:0e.0: reg 1c io port: [0xb70-0xb73] [ 0.203257] pci 0000:00:0e.0: reg 20 io port: [0xd400-0xd40f] [ 0.203264] pci 0000:00:0e.0: reg 24 32bit mmio: [0xda004000-0xda004fff] [ 0.203333] pci 0000:00:0f.0: reg 10 io port: [0x9e0-0x9e7] [ 0.203339] pci 0000:00:0f.0: reg 14 io port: [0xbe0-0xbe3] [ 0.203345] pci 0000:00:0f.0: reg 18 io port: [0x960-0x967] [ 0.203351] pci 0000:00:0f.0: reg 1c io port: [0xb60-0xb63] [ 0.203357] pci 0000:00:0f.0: reg 20 io port: [0xe800-0xe80f] [ 0.203364] pci 0000:00:0f.0: reg 24 32bit mmio: [0xda005000-0xda005fff] [ 0.203498] pci 0000:00:10.1: reg 10 32bit mmio: [0xda000000-0xda003fff] [ 0.203547] pci 0000:00:10.1: PME# supported from D3hot D3cold [ 0.203552] pci 0000:00:10.1: PME# disabled [ 0.203628] pci 0000:01:00.0: reg 10 32bit mmio: [0xd6000000-0xd6ffffff] [ 0.203638] pci 0000:01:00.0: reg 14 64bit mmio pref: [0xb0000000-0xbfffffff] [ 0.203648] pci 0000:01:00.0: reg 1c 64bit mmio: [0xd4000000-0xd5ffffff] [ 0.203655] pci 0000:01:00.0: reg 24 io port: [0x9000-0x907f] [ 0.203661] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xd7000000-0xd701ffff] [ 0.203742] pci 0000:00:02.0: bridge io port: [0x9000-0x9fff] [ 0.203746] pci 0000:00:02.0: bridge 32bit mmio: [0xd4000000-0xd7ffffff] [ 0.203751] pci 0000:00:02.0: bridge 64bit mmio pref: [0xb0000000-0xbfffffff] [ 0.203900] pci 0000:04:00.0: reg 10 32bit mmio: [0xd2000000-0xd2ffffff] [ 0.203911] pci 0000:04:00.0: reg 14 64bit mmio pref: [0xc0000000-0xcfffffff] [ 0.203923] pci 0000:04:00.0: reg 1c 64bit mmio: [0xd0000000-0xd1ffffff] [ 0.203930] pci 0000:04:00.0: reg 24 io port: [0xa000-0xa07f] [ 0.203937] pci 0000:04:00.0: reg 30 32bit mmio pref: [0xfffe0000-0xffffffff] [ 0.204036] pci 0000:00:06.0: bridge io port: [0xa000-0xafff] [ 0.204040] pci 0000:00:06.0: bridge 32bit mmio: [0xd0000000-0xd3ffffff] [ 0.204045] pci 0000:00:06.0: bridge 64bit mmio pref: [0xc0000000-0xcfffffff] [ 0.204166] pci 0000:06:0c.0: reg 10 32bit mmio: [0xd9000000-0xd9003fff] [ 0.204173] pci 0000:06:0c.0: reg 14 io port: [0xb000-0xb0ff] [ 0.204201] pci 0000:06:0c.0: reg 30 32bit mmio pref: [0xd8000000-0xd801ffff] [ 0.204227] pci 0000:06:0c.0: supports D1 D2 [ 0.204229] pci 0000:06:0c.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.204234] pci 0000:06:0c.0: PME# disabled [ 0.204268] pci 0000:00:10.0: transparent bridge [ 0.204272] pci 0000:00:10.0: bridge io port: [0xb000-0xbfff] [ 0.204277] pci 0000:00:10.0: bridge 32bit mmio: [0xd8000000-0xd9ffffff] [ 0.204299] pci_bus 0000:00: on NUMA node 0 [ 0.204305] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.204634] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.282491] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.282657] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.282826] ACPI: PCI Interrupt Link [LNK3] (IRQs *5 7 9 10 11 14 15) [ 0.282985] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.283147] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 *10 11 14 15) [ 0.283306] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.283469] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 *11 14 15) [ 0.283627] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.283791] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 *10 11 14 15) [ 0.283950] ACPI: PCI Interrupt Link [LUBB] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.284125] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.284286] ACPI: PCI Interrupt Link [LACI] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.284451] ACPI: PCI Interrupt Link [LAZA] (IRQs *5 7 9 10 11 14 15) [ 0.284612] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.284771] ACPI: PCI Interrupt Link [LMCI] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.284933] ACPI: PCI Interrupt Link [LSMB] (IRQs *5 7 9 10 11 14 15) [ 0.285102] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 *11 14 15) [ 0.285261] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.285422] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 *10 11 14 15) [ 0.285590] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 *11 14 15) [ 0.285796] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. [ 0.285992] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. [ 0.286189] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0 [ 0.286382] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. [ 0.286577] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0 [ 0.286774] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled. [ 0.286970] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0 [ 0.287171] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled. [ 0.287365] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0 [ 0.287559] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled. [ 0.287757] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled. [ 0.287953] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled. [ 0.288169] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled. [ 0.288368] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0 [ 0.288562] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled. [ 0.288761] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0 [ 0.288958] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0 [ 0.289154] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled. [ 0.289354] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. [ 0.289549] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 [ 0.289744] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0 [ 0.289897] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.289903] vgaarb: device added: PCI:0000:04:00.0,decodes=io+mem,owns=none,locks=none [ 0.289906] vgaarb: loaded [ 0.290044] SCSI subsystem initialized [ 0.290158] libata version 3.00 loaded. [ 0.290232] usbcore: registered new interface driver usbfs [ 0.290248] usbcore: registered new interface driver hub [ 0.290278] usbcore: registered new device driver usb [ 0.290422] ACPI: WMI: Mapper loaded [ 0.290424] PCI: Using ACPI for IRQ routing [ 0.290629] NetLabel: Initializing [ 0.290631] NetLabel: domain hash size = 128 [ 0.290633] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.290646] NetLabel: unlabeled traffic allowed by default [ 0.290690] hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31 [ 0.290696] hpet0: 3 comparators, 32-bit 25.000000 MHz counter [ 0.296194] Switching to clocksource tsc [ 0.298542] AppArmor: AppArmor Filesystem Enabled [ 0.298560] pnp: PnP ACPI init [ 0.298580] ACPI: bus type pnp registered [ 0.303467] pnp 00:0b: mem resource (0xffff0000-0xffffffff) overlaps 0000:04:00.0 BAR 6 (0xfffe0000-0xffffffff), disabling [ 0.303536] pnp: PnP ACPI: found 12 devices [ 0.303538] ACPI: ACPI bus type pnp unregistered [ 0.303543] PnPBIOS: Disabled by ACPI PNP [ 0.303556] system 00:01: ioport range 0x4000-0x407f has been reserved [ 0.303559] system 00:01: ioport range 0x4080-0x40ff has been reserved [ 0.303562] system 00:01: ioport range 0x4400-0x447f has been reserved [ 0.303565] system 00:01: ioport range 0x4480-0x44ff has been reserved [ 0.303568] system 00:01: ioport range 0x4800-0x487f has been reserved [ 0.303571] system 00:01: ioport range 0x4880-0x48ff has been reserved [ 0.303578] system 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 0.303581] system 00:02: ioport range 0x800-0x87f has been reserved [ 0.303584] system 00:02: ioport range 0x290-0x297 has been reserved [ 0.303587] system 00:02: ioport range 0x880-0x88f has been reserved [ 0.303596] system 00:0a: iomem range 0xe0000000-0xefffffff has been reserved [ 0.303603] system 00:0b: iomem range 0xf0000-0xf3fff could not be reserved [ 0.303606] system 00:0b: iomem range 0xf4000-0xf7fff could not be reserved [ 0.303609] system 00:0b: iomem range 0xf8000-0xfbfff could not be reserved [ 0.303612] system 00:0b: iomem range 0xfc000-0xfffff could not be reserved [ 0.303629] system 00:0b: iomem range 0xfeff0000-0xfeff00ff has been reserved [ 0.303632] system 00:0b: iomem range 0x7fef0000-0x7fefffff could not be reserved [ 0.303635] system 00:0b: iomem range 0x0-0x9ffff could not be reserved [ 0.303638] system 00:0b: iomem range 0x100000-0x7feeffff could not be reserved [ 0.303641] system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.303644] system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.303648] system 00:0b: iomem range 0xfeff0000-0xfeff03ff could not be reserved [ 0.338399] pci 0000:04:00.0: BAR 6: no parent found for of device [0xfffe0000-0xffffffff] [ 0.338406] pci 0000:06:0c.0: BAR 6: address space collision on of device [0xd8000000-0xd801ffff] [ 0.338450] pci 0000:00:02.0: PCI bridge, secondary bus 0000:01 [ 0.338454] pci 0000:00:02.0: IO window: 0x9000-0x9fff [ 0.338458] pci 0000:00:02.0: MEM window: 0xd4000000-0xd7ffffff [ 0.338462] pci 0000:00:02.0: PREFETCH window: 0x000000b0000000-0x000000bfffffff [ 0.338468] pci 0000:00:04.0: PCI bridge, secondary bus 0000:02 [ 0.338470] pci 0000:00:04.0: IO window: disabled [ 0.338474] pci 0000:00:04.0: MEM window: disabled [ 0.338477] pci 0000:00:04.0: PREFETCH window: disabled [ 0.338482] pci 0000:00:05.0: PCI bridge, secondary bus 0000:03 [ 0.338484] pci 0000:00:05.0: IO window: disabled [ 0.338488] pci 0000:00:05.0: MEM window: disabled [ 0.338492] pci 0000:00:05.0: PREFETCH window: disabled [ 0.338498] pci 0000:00:06.0: PCI bridge, secondary bus 0000:04 [ 0.338501] pci 0000:00:06.0: IO window: 0xa000-0xafff [ 0.338506] pci 0000:00:06.0: MEM window: 0xd0000000-0xd3ffffff [ 0.338509] pci 0000:00:06.0: PREFETCH window: 0x000000c0000000-0x000000cfffffff [ 0.338515] pci 0000:00:07.0: PCI bridge, secondary bus 0000:05 [ 0.338517] pci 0000:00:07.0: IO window: disabled [ 0.338521] pci 0000:00:07.0: MEM window: disabled [ 0.338524] pci 0000:00:07.0: PREFETCH window: disabled [ 0.338530] pci 0000:00:10.0: PCI bridge, secondary bus 0000:06 [ 0.338533] pci 0000:00:10.0: IO window: 0xb000-0xbfff [ 0.338538] pci 0000:00:10.0: MEM window: 0xd8000000-0xd9ffffff [ 0.338543] pci 0000:00:10.0: PREFETCH window: 0x80000000-0x800fffff [ 0.338559] pci 0000:00:02.0: setting latency timer to 64 [ 0.338567] pci 0000:00:04.0: setting latency timer to 64 [ 0.338575] pci 0000:00:05.0: setting latency timer to 64 [ 0.338583] pci 0000:00:06.0: setting latency timer to 64 [ 0.338590] pci 0000:00:07.0: setting latency timer to 64 [ 0.338596] pci 0000:00:10.0: setting latency timer to 64 [ 0.338601] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.338603] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.338606] pci_bus 0000:01: resource 0 io: [0x9000-0x9fff] [ 0.338609] pci_bus 0000:01: resource 1 mem: [0xd4000000-0xd7ffffff] [ 0.338612] pci_bus 0000:01: resource 2 pref mem [0xb0000000-0xbfffffff] [ 0.338615] pci_bus 0000:04: resource 0 io: [0xa000-0xafff] [ 0.338618] pci_bus 0000:04: resource 1 mem: [0xd0000000-0xd3ffffff] [ 0.338620] pci_bus 0000:04: resource 2 pref mem [0xc0000000-0xcfffffff] [ 0.338623] pci_bus 0000:06: resource 0 io: [0xb000-0xbfff] [ 0.338626] pci_bus 0000:06: resource 1 mem: [0xd8000000-0xd9ffffff] [ 0.338628] pci_bus 0000:06: resource 2 pref mem [0x80000000-0x800fffff] [ 0.338631] pci_bus 0000:06: resource 3 io: [0x00-0xffff] [ 0.338634] pci_bus 0000:06: resource 4 mem: [0x000000-0xffffffff] [ 0.338690] NET: Registered protocol family 2 [ 0.338814] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.339180] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.339885] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.340236] TCP: Hash tables configured (established 131072 bind 65536) [ 0.340239] TCP reno registered [ 0.340355] NET: Registered protocol family 1 [ 0.363723] pci 0000:01:00.0: Boot video device [ 0.363960] cpufreq-nforce2: No nForce2 chipset. [ 0.363990] Scanning for low memory corruption every 60 seconds [ 0.364109] audit: initializing netlink socket (disabled) [ 0.364125] type=2000 audit(1283889863.363:1): initialized [ 0.374214] highmem bounce pool size: 64 pages [ 0.374220] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.375833] VFS: Disk quotas dquot_6.5.2 [ 0.375893] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.376496] fuse init (API version 7.13) [ 0.376582] msgmni has been set to 1679 [ 0.376812] alg: No test for stdrng (krng) [ 0.376868] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.376871] io scheduler noop registered [ 0.376873] io scheduler anticipatory registered [ 0.376875] io scheduler deadline registered [ 0.376918] io scheduler cfq registered (default) [ 0.377089] alloc irq_desc for 24 on node -1 [ 0.377091] alloc kstat_irqs on node -1 [ 0.377102] pcieport 0000:00:02.0: irq 24 for MSI/MSI-X [ 0.377109] pcieport 0000:00:02.0: setting latency timer to 64 [ 0.377206] alloc irq_desc for 25 on node -1 [ 0.377208] alloc kstat_irqs on node -1 [ 0.377217] pcieport 0000:00:04.0: irq 25 for MSI/MSI-X [ 0.377223] pcieport 0000:00:04.0: setting latency timer to 64 [ 0.377317] alloc irq_desc for 26 on node -1 [ 0.377318] alloc kstat_irqs on node -1 [ 0.377325] pcieport 0000:00:05.0: irq 26 for MSI/MSI-X [ 0.377331] pcieport 0000:00:05.0: setting latency timer to 64 [ 0.377419] alloc irq_desc for 27 on node -1 [ 0.377421] alloc kstat_irqs on node -1 [ 0.377427] pcieport 0000:00:06.0: irq 27 for MSI/MSI-X [ 0.377434] pcieport 0000:00:06.0: setting latency timer to 64 [ 0.377523] alloc irq_desc for 28 on node -1 [ 0.377525] alloc kstat_irqs on node -1 [ 0.377531] pcieport 0000:00:07.0: irq 28 for MSI/MSI-X [ 0.377537] pcieport 0000:00:07.0: setting latency timer to 64 [ 0.377608] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.377635] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.377737] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.377741] ACPI: Power Button [PWRB] [ 0.377813] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.377816] ACPI: Power Button [PWRF] [ 0.377878] fan PNP0C0B:00: registered as cooling_device0 [ 0.377883] ACPI: Fan [FAN] (on) [ 0.378551] ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU0._PDC] (Node f701bcd8), AE_ALREADY_EXISTS [ 0.378559] ACPI: Marking method _PDC as Serialized because of AE_ALREADY_EXISTS error [ 0.378619] processor LNXCPU:00: registered as cooling_device1 [ 0.378790] ACPI: SSDT 7fefac50 000CE (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000) [ 0.379109] processor LNXCPU:01: registered as cooling_device2 [ 0.384419] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.384430] ACPI: Thermal Zone [THRM] (40 C) [ 0.386041] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.386158] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.386566] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.387733] brd: module loaded [ 0.388233] loop: module loaded [ 0.388328] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 0.388532] pata_acpi 0000:00:0d.0: setting latency timer to 64 [ 0.388894] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23 [ 0.388901] alloc irq_desc for 23 on node -1 [ 0.388903] alloc kstat_irqs on node -1 [ 0.388913] pata_acpi 0000:00:0e.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23 [ 0.388931] pata_acpi 0000:00:0e.0: setting latency timer to 64 [ 0.388940] pata_acpi 0000:00:0e.0: PCI INT A disabled [ 0.389250] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22 [ 0.389253] alloc irq_desc for 22 on node -1 [ 0.389255] alloc kstat_irqs on node -1 [ 0.389260] pata_acpi 0000:00:0f.0: PCI INT A -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22 [ 0.389278] pata_acpi 0000:00:0f.0: setting latency timer to 64 [ 0.389287] pata_acpi 0000:00:0f.0: PCI INT A disabled [ 0.389614] Fixed MDIO Bus: probed [ 0.389653] PPP generic driver version 2.4.2 [ 0.389694] tun: Universal TUN/TAP device driver, 1.6 [ 0.389696] tun: (C) 1999-2004 Max Krasnyansky [ 0.389783] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.390101] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21 [ 0.390105] alloc irq_desc for 21 on node -1 [ 0.390107] alloc kstat_irqs on node -1 [ 0.390111] ehci_hcd 0000:00:0b.1: PCI INT B -> Link[APCL] -> GSI 21 (level, low) -> IRQ 21 [ 0.390125] ehci_hcd 0000:00:0b.1: setting latency timer to 64 [ 0.390129] ehci_hcd 0000:00:0b.1: EHCI Host Controller [ 0.390163] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1 [ 0.390186] ehci_hcd 0000:00:0b.1: debug port 1 [ 0.390195] ehci_hcd 0000:00:0b.1: cache line size of 32 is not supported [ 0.390213] ehci_hcd 0000:00:0b.1: irq 21, io mem 0xda007000 [ 0.390274] isapnp: Scanning for PnP cards... [ 0.439213] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00 [ 0.439366] usb usb1: configuration #1 chosen from 1 choice [ 0.439398] hub 1-0:1.0: USB hub found [ 0.439409] hub 1-0:1.0: 8 ports detected [ 0.439487] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.439903] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 20 [ 0.439910] alloc irq_desc for 20 on node -1 [ 0.439912] alloc kstat_irqs on node -1 [ 0.439920] ohci_hcd 0000:00:0b.0: PCI INT A -> Link[APCF] -> GSI 20 (level, low) -> IRQ 20 [ 0.439941] ohci_hcd 0000:00:0b.0: setting latency timer to 64 [ 0.439944] ohci_hcd 0000:00:0b.0: OHCI Host Controller [ 0.439986] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2 [ 0.440013] ohci_hcd 0000:00:0b.0: irq 20, io mem 0xda006000 [ 0.506033] usb usb2: configuration #1 chosen from 1 choice [ 0.506065] hub 2-0:1.0: USB hub found [ 0.506080] hub 2-0:1.0: 8 ports detected [ 0.506154] uhci_hcd: USB Universal Host Controller Interface driver [ 0.506273] PNP: No PS/2 controller found. Probing ports directly. [ 0.509531] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.509539] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.509619] mice: PS/2 mouse device common for all mice [ 0.509730] rtc_cmos 00:05: RTC can wake from S4 [ 0.509774] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 0.509806] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs [ 0.509904] device-mapper: uevent: version 1.0.3 [ 0.523433] Freeing initrd memory: 13436k freed [ 0.531357] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.567772] device-mapper: multipath: version 1.1.0 loaded [ 0.567775] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.567914] EISA: Probing bus 0 at eisa.0 [ 0.567932] Cannot allocate resource for EISA slot 4 [ 0.567934] Cannot allocate resource for EISA slot 5 [ 0.567945] EISA: Detected 0 cards. [ 0.568022] cpuidle: using governor ladder [ 0.568024] cpuidle: using governor menu [ 0.568515] TCP cubic registered [ 0.568673] NET: Registered protocol family 10 [ 0.569183] lo: Disabled Privacy Extensions [ 0.569537] NET: Registered protocol family 17 [ 0.570228] Using IPI No-Shortcut mode [ 0.570300] PM: Resume from disk failed. [ 0.570316] registered taskstats version 1 [ 0.570778] Magic number: 10:179:93 [ 0.570890] rtc_cmos 00:05: setting system clock to 2010-09-07 20:04:24 UTC (1283889864) [ 0.570893] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.570895] EDD information not available. [ 0.744639] isapnp: No Plug & Play device found [ 0.744656] Freeing unused kernel memory: 656k freed [ 0.745118] Write protecting the kernel text: 4676k [ 0.745163] Write protecting the kernel read-only data: 1840k [ 0.779724] ramzswap: disk size set to 1030252 kB [ 0.785770] udev: starting version 151 [ 0.811591] usb 1-2: new high speed USB device using ehci_hcd and address 2 [ 0.839376] Adding 1030248k swap on /dev/ramzswap0. Priority:100 extents:1 across:1030248k SS [ 0.858658] Linux agpgart interface v0.103 [ 0.923927] [drm] Initialized drm 1.1.0 20060810 [ 0.927574] pata_amd 0000:00:0d.0: version 0.4.1 [ 0.927617] pata_amd 0000:00:0d.0: setting latency timer to 64 [ 0.927692] scsi0 : pata_amd [ 0.928076] scsi1 : pata_amd [ 0.928885] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 0.928888] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 0.929095] sata_nv 0000:00:0e.0: version 3.5 [ 0.929106] sata_nv 0000:00:0e.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23 [ 0.929109] sata_nv 0000:00:0e.0: Using SWNCQ mode [ 0.929153] sata_nv 0000:00:0e.0: setting latency timer to 64 [ 0.929366] scsi2 : sata_nv [ 0.929589] scsi3 : sata_nv [ 0.929771] ata3: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd400 irq 23 [ 0.929774] ata4: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd408 irq 23 [ 0.929792] sata_nv 0000:00:0f.0: PCI INT A -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22 [ 0.929794] sata_nv 0000:00:0f.0: Using SWNCQ mode [ 0.929833] sata_nv 0000:00:0f.0: setting latency timer to 64 [ 0.930146] scsi4 : sata_nv [ 0.930325] scsi5 : sata_nv [ 0.930518] ata5: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xe800 irq 22 [ 0.930521] ata6: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xe808 irq 22 [ 0.931989] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 [ 0.931995] alloc irq_desc for 18 on node -1 [ 0.931997] alloc kstat_irqs on node -1 [ 0.932004] skge 0000:06:0c.0: PCI INT A -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18 [ 0.932041] skge 1.13 addr 0xd9000000 irq 18 chip Yukon-Lite rev 9 [ 0.932785] skge eth0: addr 00:1a:92:8b:8d:64 [ 0.945141] usb 1-2: configuration #1 chosen from 1 choice [ 0.952746] Initializing USB Mass Storage driver... [ 0.952885] scsi6 : SCSI emulation for USB Mass Storage devices [ 0.952989] usbcore: registered new interface driver usb-storage [ 0.952992] USB Mass Storage support registered. [ 0.952997] usb-storage: device found at 2 [ 0.952999] usb-storage: waiting for device to settle before scanning [ 1.104062] usb 1-5: new high speed USB device using ehci_hcd and address 4 [ 1.104879] ata1.00: ATA-8: WDC WD5000AAKB-00H8A0, 05.04E05, max UDMA/133 [ 1.104884] ata1.00: 976773168 sectors, multi 1: LBA48 [ 1.104939] ata1: nv_mode_filter: 0x7f39f&0x7f39f->0x7f39f, BIOS=0x7f000 (0xc700c0c0) ACPI=0x7f01f (15:600:0x13) [ 1.120944] ata1.00: configured for UDMA/133 [ 1.121118] scsi 0:0:0:0: Direct-Access ATA WDC WD5000AAKB-0 05.0 PQ: 0 ANSI: 5 [ 1.121295] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.121345] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 1.121421] sd 0:0:0:0: [sda] Write Protect is off [ 1.121424] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.121449] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.121586] sda: sda1 sda2 sda3 [ 1.146090] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.236587] usb 1-5: configuration #1 chosen from 1 choice [ 1.236928] hub 1-5:1.0: USB hub found [ 1.236984] hub 1-5:1.0: 4 ports detected [ 1.292366] ata2.00: ATAPI: SONY DVD RW DRU-710A, BYX5, max UDMA/66 [ 1.292658] ata2.01: ATA-8: WDC WD5000AAKB-00H8A0, 05.04E05, max UDMA/133 [ 1.292663] ata2.01: 976773168 sectors, multi 1: LBA48 [ 1.292717] ata2: nv_mode_filter: 0x1f39f&0x739f->0x739f, BIOS=0x7000 (0xc700c0c0) ACPI=0x701f (60:60:0x1f) [ 1.292725] ata2: nv_mode_filter: 0x7f39f&0x739f->0x739f, BIOS=0x7000 (0xc700c0c0) ACPI=0x701f (60:60:0x1f) [ 1.308324] ata2.00: configured for UDMA/33 [ 1.324576] ata2.01: configured for UDMA/33 [ 1.325844] scsi 1:0:0:0: CD-ROM SONY DVD RW DRU-710A BYX5 PQ: 0 ANSI: 5 [ 1.329876] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray [ 1.329881] Uniform CD-ROM driver Revision: 3.20 [ 1.330040] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.330123] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.330298] scsi 1:0:1:0: Direct-Access ATA WDC WD5000AAKB-0 05.0 PQ: 0 ANSI: 5 [ 1.330422] sd 1:0:1:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 1.330470] sd 1:0:1:0: [sdb] Write Protect is off [ 1.330473] sd 1:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.330499] sd 1:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.330629] sdb: [ 1.330748] sd 1:0:1:0: Attached scsi generic sg2 type 0 [ 1.334167] sdb1 [ 1.334445] sd 1:0:1:0: [sdb] Attached SCSI disk [ 1.388072] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.388177] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.397355] ata3.00: ATA-7: Maxtor 6L200M0, BACE1G20, max UDMA/133 [ 1.397361] ata3.00: 398297088 sectors, multi 1: LBA48 NCQ (depth 31/32) [ 1.413234] ata3.00: configured for UDMA/133 [ 1.413385] scsi 2:0:0:0: Direct-Access ATA Maxtor 6L200M0 BACE PQ: 0 ANSI: 5 [ 1.413401] ata3.00: Disabling SWNCQ mode (depth 1) [ 1.413530] sd 2:0:0:0: [sdc] 398297088 512-byte logical blocks: (203 GB/189 GiB) [ 1.413579] sd 2:0:0:0: [sdc] Write Protect is off [ 1.413582] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 1.413608] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.413775] sdc: [ 1.413917] sd 2:0:0:0: Attached scsi generic sg3 type 0 [ 1.436078] sdc1 [ 1.436500] ata5.00: ATA-7: MAXTOR STM3500630AS, 3.AAE, max UDMA/133 [ 1.436504] ata5.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 31/32) [ 1.436769] sd 2:0:0:0: [sdc] Attached SCSI disk [ 1.503130] ata5.00: configured for UDMA/133 [ 1.652049] usb 2-3: new low speed USB device using ohci_hcd and address 2 [ 1.867820] usb 2-3: configuration #1 chosen from 1 choice [ 1.880563] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.881394] usbcore: registered new interface driver hiddev [ 1.887005] input: Microsoft Microsoft® Digital Media Pro Keyboard as /devices/pci0000:00/0000:00:0b.0/usb2/2-3/2-3:1.0/input/input3 [ 1.887089] generic-usb 0003:045E:00B0.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft® Digital Media Pro Keyboard] on usb-0000:00:0b.0-3/input0 [ 1.896985] ata4.00: ATA-6: HDS722512VLSA80, V33OA63A, max UDMA/100 [ 1.896989] ata4.00: 241254720 sectors, multi 1: LBA48 [ 1.899933] input: Microsoft Microsoft® Digital Media Pro Keyboard as /devices/pci0000:00/0000:00:0b.0/usb2/2-3/2-3:1.1/input/input4 [ 1.900021] generic-usb 0003:045E:00B0.0002: input,hidraw1: USB HID v1.11 Device [Microsoft Microsoft® Digital Media Pro Keyboard] on usb-0000:00:0b.0-3/input1 [ 1.900053] usbcore: registered new interface driver usbhid [ 1.900056] usbhid: v2.6:USB HID core driver [ 1.921060] ata4.00: configured for UDMA/100 [ 1.921241] scsi 3:0:0:0: Direct-Access ATA HDS722512VLSA80 V33O PQ: 0 ANSI: 5 [ 1.921374] sd 3:0:0:0: [sdd] 241254720 512-byte logical blocks: (123 GB/115 GiB) [ 1.921424] sd 3:0:0:0: [sdd] Write Protect is off [ 1.921427] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 1.921453] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.921619] sdd: [ 1.921754] sd 3:0:0:0: Attached scsi generic sg4 type 0 [ 1.922054] scsi 4:0:0:0: Direct-Access ATA MAXTOR STM350063 3.AA PQ: 0 ANSI: 5 [ 1.922184] sd 4:0:0:0: Attached scsi generic sg5 type 0 [ 1.922221] sd 4:0:0:0: [sde] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 1.922300] sd 4:0:0:0: [sde] Write Protect is off [ 1.922303] sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00 [ 1.922329] sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.922468] sde: sdd1 [ 1.936135] sd 3:0:0:0: [sdd] Attached SCSI disk [ 1.942507] sde1 sde2 [ 1.942936] sd 4:0:0:0: [sde] Attached SCSI disk [ 2.172063] usb 2-6: new full speed USB device using ohci_hcd and address 3 [ 2.387727] usb 2-6: configuration #1 chosen from 1 choice [ 2.388113] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.396383] ata6.00: ATA-8: WDC WD1001FAES-55W7A0, 05.01D05, max UDMA/133 [ 2.396390] ata6.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 31/32) [ 2.404439] ata6.00: configured for UDMA/133 [ 2.404620] scsi 5:0:0:0: Direct-Access ATA WDC WD1001FAES-5 05.0 PQ: 0 ANSI: 5 [ 2.404811] sd 5:0:0:0: [sdf] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 2.404861] sd 5:0:0:0: [sdf] Write Protect is off [ 2.404863] sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 00 [ 2.404889] sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.405040] sdf: [ 2.405162] sd 5:0:0:0: Attached scsi generic sg6 type 0 [ 2.411852] sdf1 sdf2 sdf3 [ 2.412210] sd 5:0:0:0: [sdf] Attached SCSI disk [ 2.430219] ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16 [ 2.430226] alloc irq_desc for 16 on node -1 [ 2.430229] alloc kstat_irqs on node -1 [ 2.430238] nouveau 0000:01:00.0: PCI INT A -> Link[APC5] -> GSI 16 (level, low) -> IRQ 16 [ 2.430244] nouveau 0000:01:00.0: setting latency timer to 64 [ 2.438146] [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x084200a2) [ 2.438550] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN [ 2.484031] [drm] nouveau 0000:01:00.0: ... appears to be valid [ 2.484038] [drm] nouveau 0000:01:00.0: BIT BIOS found [ 2.484041] [drm] nouveau 0000:01:00.0: Bios version 60.84.41.00 [ 2.484045] [drm] nouveau 0000:01:00.0: TMDS table revision 2.0 not currently supported [ 2.484048] [drm] nouveau 0000:01:00.0: BIT table 'd' not found [ 2.484051] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0 [ 2.484055] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 14 2 [ 2.484058] [drm] nouveau 0000:01:00.0: 0: 0x00001030: type 0x30 idx 0 tag 0x07 [ 2.484062] [drm] nouveau 0000:01:00.0: 1: 0x00002130: type 0x30 idx 1 tag 0x08 [ 2.484065] [drm] nouveau 0000:01:00.0: 2: 0x00000210: type 0x10 idx 2 tag 0xff [ 2.484068] [drm] nouveau 0000:01:00.0: 3: 0x00000211: type 0x11 idx 2 tag 0xff [ 2.484071] [drm] nouveau 0000:01:00.0: 4: 0x00000213: type 0x13 idx 2 tag 0xff [ 2.484074] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01000302 00000030 [ 2.484077] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 02000300 00000028 [ 2.484084] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 02011312 00000030 [ 2.484084] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 04011310 00000028 [ 2.484086] [drm] nouveau 0000:01:00.0: Raw DCB entry 4: 010223f1 00c0c080 [ 2.484093] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xBEDB [ 2.484133] usb 1-5.3: new low speed USB device using ehci_hcd and address 6 [ 2.528709] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xC20E [ 2.564148] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xCC5B [ 2.564161] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xCD4D [ 2.572223] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xCF66 [ 2.572228] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xCFCB [ 2.596127] [drm] nouveau 0000:01:00.0: 0xCFCB: Condition still not met after 20ms, skipping following opcodes [ 2.596138] [drm] nouveau 0000:01:00.0: 0xB15A: parsing output script 0 [ 2.596144] [drm] nouveau 0000:01:00.0: 0xB15A: parsing output script 0 [ 2.596149] [drm] nouveau 0000:01:00.0: 0xA7D4: parsing output script 0 [ 2.606579] usb 1-5.3: configuration #1 chosen from 1 choice [ 2.619415] input: Microsoft Microsoft Wireless Optical Mouse® 1.0A as /devices/pci0000:00/0000:00:0b.1/usb1/1-5/1-5.3/1-5.3:1.0/input/input5 [ 2.619507] generic-usb 0003:045E:008C.0003: input,hidraw2: USB HID v1.11 Mouse [Microsoft Microsoft Wireless Optical Mouse® 1.0A] on usb-0000:00:0b.1-5.3/input0 [ 2.665999] [TTM] Zone kernel: Available graphics memory: 436874 kiB. [ 2.666002] [TTM] Zone highmem: Available graphics memory: 1030254 kiB. [ 2.666011] [drm] nouveau 0000:01:00.0: 512 MiB VRAM [ 2.681983] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture) [ 2.682687] [drm] nouveau 0000:01:00.0: Allocating FIFO number 1 [ 2.686125] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1 [ 2.686535] [drm] nouveau 0000:01:00.0: Detected a TMDS output [ 2.686538] [drm] nouveau 0000:01:00.0: Detected a DAC output [ 2.686542] [drm] nouveau 0000:01:00.0: Detected a TMDS output [ 2.686544] [drm] nouveau 0000:01:00.0: Detected a DAC output [ 2.686547] [drm] nouveau 0000:01:00.0: DCB encoder 1 unknown [ 2.686550] [drm] nouveau 0000:01:00.0: Detected a DVI-I connector [ 2.686710] [drm] nouveau 0000:01:00.0: Detected a DVI-I connector [ 2.693037] usb 1-5.4: new low speed USB device using ehci_hcd and address 7 [ 2.823410] usb 1-5.4: configuration #1 chosen from 1 choice [ 2.912111] [drm] nouveau 0000:01:00.0: allocated 1440x900 fb: 0x40250000, bo c10fea00 [ 2.912186] fb0: nouveaufb frame buffer device [ 2.912188] registered panic notifier [ 2.912198] [drm] Initialized nouveau 0.0.15 20090420 for 0000:01:00.0 on minor 0 [ 2.912224] nouveau 0000:04:00.0: enabling device (0000 -> 0003) [ 2.912586] ACPI: PCI Interrupt Link [APC7] enabled at IRQ 16 [ 2.912591] nouveau 0000:04:00.0: PCI INT A -> Link[APC7] -> GSI 16 (level, low) -> IRQ 16 [ 2.912598] nouveau 0000:04:00.0: setting latency timer to 64 [ 2.914713] [drm] nouveau 0000:04:00.0: Detected an NV50 generation card (0x084200a2) [ 2.915102] [drm] nouveau 0000:04:00.0: Attempting to load BIOS image from PRAMIN [ 2.915110] [drm] nouveau 0000:04:00.0: ... BIOS signature not found [ 2.915112] [drm] nouveau 0000:04:00.0: Attempting to load BIOS image from PROM [ 3.058405] generic-usb 0003:051D:0002.0004: hiddev96,hidraw3: USB HID v1.10 Device [APC Back-UPS ES 650 FW:825.B1.D USB FW:B1] on usb-0000:00:0b.1-5.4/input0 [ 3.090730] [drm] nouveau 0000:04:00.0: ... appears to be valid [ 3.090734] [drm] nouveau 0000:04:00.0: BIT BIOS found [ 3.090737] [drm] nouveau 0000:04:00.0: Bios version 60.84.41.00 [ 3.090741] [drm] nouveau 0000:04:00.0: TMDS table revision 2.0 not currently supported [ 3.090743] [drm] nouveau 0000:04:00.0: BIT table 'd' not found [ 3.090746] [drm] nouveau 0000:04:00.0: Found Display Configuration Block version 4.0 [ 3.090750] [drm] nouveau 0000:04:00.0: DCB connector table: VHER 0x40 5 14 2 [ 3.090753] [drm] nouveau 0000:04:00.0: 0: 0x00001030: type 0x30 idx 0 tag 0x07 [ 3.090756] [drm] nouveau 0000:04:00.0: 1: 0x00002130: type 0x30 idx 1 tag 0x08 [ 3.090759] [drm] nouveau 0000:04:00.0: 2: 0x00000210: type 0x10 idx 2 tag 0xff [ 3.090762] [drm] nouveau 0000:04:00.0: 3: 0x00000211: type 0x11 idx 2 tag 0xff [ 3.090765] [drm] nouveau 0000:04:00.0: 4: 0x00000213: type 0x13 idx 2 tag 0xff [ 3.090768] [drm] nouveau 0000:04:00.0: Raw DCB entry 0: 01000302 00000030 [ 3.090771] [drm] nouveau 0000:04:00.0: Raw DCB entry 1: 02000300 00000028 [ 3.090774] [drm] nouveau 0000:04:00.0: Raw DCB entry 2: 02011312 00000030 [ 3.090777] [drm] nouveau 0000:04:00.0: Raw DCB entry 3: 04011310 00000028 [ 3.090779] [drm] nouveau 0000:04:00.0: Raw DCB entry 4: 010223f1 00c0c080 [ 3.090789] [drm] nouveau 0000:04:00.0: Adaptor not initialised [ 3.090791] [drm] nouveau 0000:04:00.0: Running VBIOS init tables [ 3.090798] [drm] nouveau 0000:04:00.0: Parsing VBIOS init table 0 at offset 0xBEDB [ 3.132169] [drm] nouveau 0000:04:00.0: Parsing VBIOS init table 1 at offset 0xC20E [ 3.168053] [drm] nouveau 0000:04:00.0: Parsing VBIOS init table 2 at offset 0xCC5B [ 3.168088] [drm] nouveau 0000:04:00.0: Parsing VBIOS init table 3 at offset 0xCD4D [ 3.176124] [drm] nouveau 0000:04:00.0: Parsing VBIOS init table 4 at offset 0xCF66 [ 3.176129] [drm] nouveau 0000:04:00.0: Parsing VBIOS init table at offset 0xCFCB [ 3.200054] [drm] nouveau 0000:04:00.0: 0xB15A: parsing output script 0 [ 3.200061] [drm] nouveau 0000:04:00.0: 0xB15A: parsing output script 0 [ 3.200067] [drm] nouveau 0000:04:00.0: 0xA7D4: parsing output script 0 [ 3.287705] [drm] nouveau 0000:04:00.0: 512 MiB VRAM [ 3.338471] [drm] nouveau 0000:04:00.0: 512 MiB GART (aperture) [ 3.339367] [drm] nouveau 0000:04:00.0: Allocating FIFO number 1 [ 3.350024] [drm] nouveau 0000:04:00.0: nouveau_channel_alloc: initialised FIFO 1 [ 3.351033] [drm] nouveau 0000:04:00.0: Detected a TMDS output [ 3.351036] [drm] nouveau 0000:04:00.0: Detected a DAC output [ 3.351038] [drm] nouveau 0000:04:00.0: Detected a TMDS output [ 3.351041] [drm] nouveau 0000:04:00.0: Detected a DAC output [ 3.351044] [drm] nouveau 0000:04:00.0: DCB encoder 1 unknown [ 3.351047] [drm] nouveau 0000:04:00.0: Detected a DVI-I connector [ 3.351208] [drm] nouveau 0000:04:00.0: Detected a DVI-I connector [ 3.455794] No connectors reported connected with modes [ 3.455804] [drm] Initialized nouveau 0.0.15 20090420 for 0000:04:00.0 on minor 1 [ 3.457609] vga16fb: initializing [ 3.457612] vga16fb: mapped to 0xc00a0000 [ 3.457616] vga16fb: not registering due to another framebuffer present [ 3.464301] [drm] nouveau 0000:01:00.0: 0xB15E: parsing output script 1 [ 3.464320] [drm] nouveau 0000:01:00.0: 0x81A9: parsing clock script 0 [ 3.464728] Console: switching to colour frame buffer device 180x56 [ 3.481539] [drm] nouveau 0000:01:00.0: 0xB15E: parsing output script 1 [ 3.481576] [drm] nouveau 0000:01:00.0: 0x81A9: parsing clock script 0 [ 3.703199] xor: automatically using best checksumming function: pIII_sse [ 3.720503] pIII_sse : 7357.000 MB/sec [ 3.720506] xor: using function: pIII_sse (7357.000 MB/sec) [ 3.723105] device-mapper: dm-raid45: initialized v0.2594b [ 4.218922] EXT4-fs (sda2): INFO: recovery required on readonly filesystem [ 4.218927] EXT4-fs (sda2): write access will be enabled during recovery [ 5.944223] usb-storage: device scan complete [ 5.960813] scsi 6:0:0:0: CD-ROM TOSHIBA SuperMultiPA3834 7.5A PQ: 0 ANSI: 0 [ 5.970416] sr1: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 5.970652] sr 6:0:0:0: Attached scsi CD-ROM sr1 [ 5.970898] sr 6:0:0:0: Attached scsi generic sg7 type 5 [ 6.064395] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 6.064403] sr 6:0:0:0: [sr1] Sense Key : Illegal Request [current] [ 6.064411] sr 6:0:0:0: [sr1] Add. Sense: Logical block address out of range [ 6.064420] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00 [ 6.064437] end_request: I/O error, dev sr1, sector 0 [ 6.064442] Buffer I/O error on device sr1, logical block 0 [ 6.072390] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 6.072396] sr 6:0:0:0: [sr1] Sense Key : Illegal Request [current] [ 6.072403] sr 6:0:0:0: [sr1] Add. Sense: Logical block address out of range [ 6.072411] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00 [ 6.072427] end_request: I/O error, dev sr1, sector 0 [ 6.072431] Buffer I/O error on device sr1, logical block 0 [ 6.080389] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 6.080395] sr 6:0:0:0: [sr1] Sense Key : Illegal Request [current] [ 6.080402] sr 6:0:0:0: [sr1] Add. Sense: Logical block address out of range [ 6.080410] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00 [ 6.080426] end_request: I/O error, dev sr1, sector 0 [ 6.080430] Buffer I/O error on device sr1, logical block 0 [ 6.088387] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 6.088393] sr 6:0:0:0: [sr1] Sense Key : Illegal Request [current] [ 6.088400] sr 6:0:0:0: [sr1] Add. Sense: Logical block address out of range [ 6.088408] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00 [ 6.088424] end_request: I/O error, dev sr1, sector 0 [ 6.088428] Buffer I/O error on device sr1, logical block 0 [ 6.095388] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 6.095395] sr 6:0:0:0: [sr1] Sense Key : Illegal Request [current] [ 6.095401] sr 6:0:0:0: [sr1] Add. Sense: Logical block address out of range [ 6.095410] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00 [ 6.095426] end_request: I/O error, dev sr1, sector 0 [ 6.095430] Buffer I/O error on device sr1, logical block 0 [ 6.102384] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 6.102391] sr 6:0:0:0: [sr1] Sense Key : Illegal Request [current] [ 6.102398] sr 6:0:0:0: [sr1] Add. Sense: Logical block address out of range [ 6.102406] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00 [ 6.102422] end_request: I/O error, dev sr1, sector 0 [ 6.102426] Buffer I/O error on device sr1, logical block 0 [ 6.109383] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 6.109389] sr 6:0:0:0: [sr1] Sense Key : Illegal Request [current] [ 6.109396] sr 6:0:0:0: [sr1] Add. Sense: Logical block address out of range [ 6.109404] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00 [ 6.109420] end_request: I/O error, dev sr1, sector 0 [ 6.109424] Buffer I/O error on device sr1, logical block 0 [ 6.116376] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 6.116380] sr 6:0:0:0: [sr1] Sense Key : Illegal Request [current] [ 6.116384] sr 6:0:0:0: [sr1] Add. Sense: Logical block address out of range [ 6.116389] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00 [ 6.116398] end_request: I/O error, dev sr1, sector 0 [ 6.116401] Buffer I/O error on device sr1, logical block 0 [ 6.123380] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 6.123386] sr 6:0:0:0: [sr1] Sense Key : Illegal Request [current] [ 6.123393] sr 6:0:0:0: [sr1] Add. Sense: Logical block address out of range [ 6.123401] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00 [ 6.123417] end_request: I/O error, dev sr1, sector 0 [ 6.123421] Buffer I/O error on device sr1, logical block 0 [ 6.130382] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 6.130388] sr 6:0:0:0: [sr1] Sense Key : Illegal Request [current] [ 6.130395] sr 6:0:0:0: [sr1] Add. Sense: Logical block address out of range [ 6.130403] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00 [ 6.130419] end_request: I/O error, dev sr1, sector 0 [ 6.130423] Buffer I/O error on device sr1, logical block 0 [ 6.137383] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 6.137389] sr 6:0:0:0: [sr1] Sense Key : Illegal Request [current] [ 6.137396] sr 6:0:0:0: [sr1] Add. Sense: Logical block address out of range [ 6.137404] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00 [ 6.137420] end_request: I/O error, dev sr1, sector 0 [ 6.144378] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 6.144384] sr 6:0:0:0: [sr1] Sense Key : Illegal Request [current] [ 6.144391] sr 6:0:0:0: [sr1] Add. Sense: Logical block address out of range [ 6.144399] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00 [ 6.144415] end_request: I/O error, dev sr1, sector 0 [ 6.151376] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 6.151382] sr 6:0:0:0: [sr1] Sense Key : Illegal Request [current] [ 6.151389] sr 6:0:0:0: [sr1] Add. Sense: Logical block address out of range [ 6.151397] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00 [ 6.151412] end_request: I/O error, dev sr1, sector 0 [ 6.158375] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 6.158381] sr 6:0:0:0: [sr1] Sense Key : Illegal Request [current] [ 6.158388] sr 6:0:0:0: [sr1] Add. Sense: Logical block address out of range [ 6.158396] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00 [ 6.158411] end_request: I/O error, dev sr1, sector 0 [ 6.165373] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 6.165379] sr 6:0:0:0: [sr1] Sense Key : Illegal Request [current] [ 6.165386] sr 6:0:0:0: [sr1] Add. Sense: Logical block address out of range [ 6.165394] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00 [ 6.165410] end_request: I/O error, dev sr1, sector 0 [ 6.172373] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 6.172379] sr 6:0:0:0: [sr1] Sense Key : Illegal Request [current] [ 6.172386] sr 6:0:0:0: [sr1] Add. Sense: Logical block address out of range [ 6.172394] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00 [ 6.172409] end_request: I/O error, dev sr1, sector 0 [ 6.179369] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 6.179373] sr 6:0:0:0: [sr1] Sense Key : Illegal Request [current] [ 6.179378] sr 6:0:0:0: [sr1] Add. Sense: Logical block address out of range [ 6.179383] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00 [ 6.179393] end_request: I/O error, dev sr1, sector 0 [ 6.186370] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 6.186376] sr 6:0:0:0: [sr1] Sense Key : Illegal Request [current] [ 6.186382] sr 6:0:0:0: [sr1] Add. Sense: Logical block address out of range [ 6.186390] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00 [ 6.186406] end_request: I/O error, dev sr1, sector 0 [ 6.193369] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 6.193375] sr 6:0:0:0: [sr1] Sense Key : Illegal Request [current] [ 6.193382] sr 6:0:0:0: [sr1] Add. Sense: Logical block address out of range [ 6.193390] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00 [ 6.193405] end_request: I/O error, dev sr1, sector 0 [ 6.200368] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 6.200374] sr 6:0:0:0: [sr1] Sense Key : Illegal Request [current] [ 6.200380] sr 6:0:0:0: [sr1] Add. Sense: Logical block address out of range [ 6.200388] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00 [ 6.200404] end_request: I/O error, dev sr1, sector 0 [ 6.207366] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 6.207372] sr 6:0:0:0: [sr1] Sense Key : Illegal Request [current] [ 6.207379] sr 6:0:0:0: [sr1] Add. Sense: Logical block address out of range [ 6.207387] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00 [ 6.207402] end_request: I/O error, dev sr1, sector 0 [ 6.214364] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 6.214370] sr 6:0:0:0: [sr1] Sense Key : Illegal Request [current] [ 6.214377] sr 6:0:0:0: [sr1] Add. Sense: Logical block address out of range [ 6.214385] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00 [ 6.214401] end_request: I/O error, dev sr1, sector 0 [ 6.221362] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 6.221366] sr 6:0:0:0: [sr1] Sense Key : Illegal Request [current] [ 6.221370] sr 6:0:0:0: [sr1] Add. Sense: Logical block address out of range [ 6.221376] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00 [ 6.221385] end_request: I/O error, dev sr1, sector 0 [ 6.228374] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 6.228382] sr 6:0:0:0: [sr1] Sense Key : Illegal Request [current] [ 6.228389] sr 6:0:0:0: [sr1] Add. Sense: Logical block address out of range [ 6.228397] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00 [ 6.228414] end_request: I/O error, dev sr1, sector 0 [ 6.235355] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 6.235359] sr 6:0:0:0: [sr1] Sense Key : Illegal Request [current] [ 6.235363] sr 6:0:0:0: [sr1] Add. Sense: Logical block address out of range [ 6.235368] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00 [ 6.235378] end_request: I/O error, dev sr1, sector 0 [ 6.242356] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 6.242360] sr 6:0:0:0: [sr1] Sense Key : Illegal Request [current] [ 6.242364] sr 6:0:0:0: [sr1] Add. Sense: Logical block address out of range [ 6.242369] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00 [ 6.242379] end_request: I/O error, dev sr1, sector 0 [ 6.249353] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 6.249356] sr 6:0:0:0: [sr1] Sense Key : Illegal Request [current] [ 6.249361] sr 6:0:0:0: [sr1] Add. Sense: Logical block address out of range [ 6.249365] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00 [ 6.249375] end_request: I/O error, dev sr1, sector 0 [ 6.251172] EXT4-fs (sda2): recovery complete [ 6.251785] EXT4-fs (sda2): mounted filesystem with ordered data mode [ 6.258365] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 6.258369] sr 6:0:0:0: [sr1] Sense Key : Illegal Request [current] [ 6.258374] sr 6:0:0:0: [sr1] Add. Sense: Logical block address out of range [ 6.258380] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00 [ 6.258390] end_request: I/O error, dev sr1, sector 0 [ 6.268360] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 6.268364] sr 6:0:0:0: [sr1] Sense Key : Illegal Request [current] [ 6.268369] sr 6:0:0:0: [sr1] Add. Sense: Logical block address out of range [ 6.268375] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00 [ 6.268385] end_request: I/O error, dev sr1, sector 0 [ 6.280367] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 6.280376] sr 6:0:0:0: [sr1] Sense Key : Illegal Request [current] [ 6.280383] sr 6:0:0:0: [sr1] Add. Sense: Logical block address out of range [ 6.280392] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00 [ 6.280409] end_request: I/O error, dev sr1, sector 0 [ 6.288347] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 6.288351] sr 6:0:0:0: [sr1] Sense Key : Illegal Request [current] [ 6.288355] sr 6:0:0:0: [sr1] Add. Sense: Logical block address out of range [ 6.288360] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00 [ 6.288370] end_request: I/O error, dev sr1, sector 0 [ 6.295351] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 6.295357] sr 6:0:0:0: [sr1] Sense Key : Illegal Request [current] [ 6.295363] sr 6:0:0:0: [sr1] Add. Sense: Logical block address out of range [ 6.295371] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00 [ 6.295387] end_request: I/O error, dev sr1, sector 0 [ 6.304349] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 6.304355] sr 6:0:0:0: [sr1] Sense Key : Illegal Request [current] [ 6.304362] sr 6:0:0:0: [sr1] Add. Sense: Logical block address out of range [ 6.304370] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00 [ 6.304386] end_request: I/O error, dev sr1, sector 0 [ 6.312352] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 6.312357] sr 6:0:0:0: [sr1] Sense Key : Illegal Request [current] [ 6.312361] sr 6:0:0:0: [sr1] Add. Sense: Logical block address out of range [ 6.312367] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00 [ 6.312377] end_request: I/O error, dev sr1, sector 0 [ 6.320349] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 6.320357] sr 6:0:0:0: [sr1] Sense Key : Illegal Request [current] [ 6.320364] sr 6:0:0:0: [sr1] Add. Sense: Logical block address out of range [ 6.320372] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00 [ 6.320389] end_request: I/O error, dev sr1, sector 0 [ 6.328341] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 6.328344] sr 6:0:0:0: [sr1] Sense Key : Illegal Request [current] [ 6.328348] sr 6:0:0:0: [sr1] Add. Sense: Logical block address out of range [ 6.328353] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00 [ 6.328363] end_request: I/O error, dev sr1, sector 0 [ 6.336339] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 6.336343] sr 6:0:0:0: [sr1] Sense Key : Illegal Request [current] [ 6.336347] sr 6:0:0:0: [sr1] Add. Sense: Logical block address out of range [ 6.336352] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00 [ 6.336362] end_request: I/O error, dev sr1, sector 0 [ 6.344342] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 6.344347] sr 6:0:0:0: [sr1] Sense Key : Illegal Request [current] [ 6.344351] sr 6:0:0:0: [sr1] Add. Sense: Logical block address out of range [ 6.344356] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00 [ 6.344367] end_request: I/O error, dev sr1, sector 0 [ 6.353342] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 6.353349] sr 6:0:0:0: [sr1] Sense Key : Illegal Request [current] [ 6.353356] sr 6:0:0:0: [sr1] Add. Sense: Logical block address out of range [ 6.353365] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00 [ 6.353381] end_request: I/O error, dev sr1, sector 0 [ 6.362338] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 6.362344] sr 6:0:0:0: [sr1] Sense Key : Illegal Request [current] [ 6.362351] sr 6:0:0:0: [sr1] Add. Sense: Logical block address out of range [ 6.362360] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00 [ 6.362376] end_request: I/O error, dev sr1, sector 0 [ 6.370339] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 6.370346] sr 6:0:0:0: [sr1] Sense Key : Illegal Request [current] [ 6.370353] sr 6:0:0:0: [sr1] Add. Sense: Logical block address out of range [ 6.370361] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00 [ 6.370377] end_request: I/O error, dev sr1, sector 0 [ 6.378336] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 6.378342] sr 6:0:0:0: [sr1] Sense Key : Illegal Request [current] [ 6.378349] sr 6:0:0:0: [sr1] Add. Sense: Logical block address out of range [ 6.378357] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00 [ 6.378374] end_request: I/O error, dev sr1, sector 0 [ 6.387334] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 6.387340] sr 6:0:0:0: [sr1] Sense Key : Illegal Request [current] [ 6.387347] sr 6:0:0:0: [sr1] Add. Sense: Logical block address out of range [ 6.387355] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00 [ 6.387372] end_request: I/O error, dev sr1, sector 0 [ 6.396328] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 6.396332] sr 6:0:0:0: [sr1] Sense Key : Illegal Request [current] [ 6.396337] sr 6:0:0:0: [sr1] Add. Sense: Logical block address out of range [ 6.396342] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00 [ 6.396352] end_request: I/O error, dev sr1, sector 0 [ 6.404329] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 6.404333] sr 6:0:0:0: [sr1] Sense Key : Illegal Request [current] [ 6.404338] sr 6:0:0:0: [sr1] Add. Sense: Logical block address out of range [ 6.404343] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00 [ 6.404353] end_request: I/O error, dev sr1, sector 0 [ 6.413332] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 6.413338] sr 6:0:0:0: [sr1] Sense Key : Illegal Request [current] [ 6.413345] sr 6:0:0:0: [sr1] Add. Sense: Logical block address out of range [ 6.413353] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00 [ 6.413369] end_request: I/O error, dev sr1, sector 0 [ 6.421332] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 6.421337] sr 6:0:0:0: [sr1] Sense Key : Illegal Request [current] [ 6.421342] sr 6:0:0:0: [sr1] Add. Sense: Logical block address out of range [ 6.421348] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00 [ 6.421358] end_request: I/O error, dev sr1, sector 0 [ 6.429324] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 6.429328] sr 6:0:0:0: [sr1] Sense Key : Illegal Request [current] [ 6.429333] sr 6:0:0:0: [sr1] Add. Sense: Logical block address out of range [ 6.429338] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00 [ 6.429348] end_request: I/O error, dev sr1, sector 0 [ 6.438328] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 6.438335] sr 6:0:0:0: [sr1] Sense Key : Illegal Request [current] [ 6.438342] sr 6:0:0:0: [sr1] Add. Sense: Logical block address out of range [ 6.438350] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00 [ 6.438367] end_request: I/O error, dev sr1, sector 0 [ 6.446326] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 6.446333] sr 6:0:0:0: [sr1] Sense Key : Illegal Request [current] [ 6.446340] sr 6:0:0:0: [sr1] Add. Sense: Logical block address out of range [ 6.446348] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00 [ 6.446365] end_request: I/O error, dev sr1, sector 0 [ 7.698033] Adding 10256376k swap on /dev/sda3. Priority:-1 extents:1 across:10256376k [ 7.755088] udev: starting version 151 [ 8.389994] lp: driver loaded but no devices found [ 8.429069] parport_pc 00:09: reported by Plug and Play ACPI [ 8.429144] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [ 8.516344] lp0: using parport0 (interrupt-driven). [ 8.570007] lirc_dev: IR Remote Control driver registered, major 61 [ 8.573612] lirc_mceusb: Windows Media Center Edition USB IR Transceiver driver for LIRC 1.90 [ 8.573616] lirc_mceusb: Daniel Melander , Martin Blatter , Dan Conti [ 8.688707] ppdev: user-space parallel port driver [ 8.748068] usb 2-6: reset full speed USB device using ohci_hcd and address 3 [ 8.954462] lirc_dev: lirc_register_driver: sample_rate: 0 [ 8.960454] lirc_mceusb[3]: Philips eHome Infrared Transceiver on usb2:3 [ 8.960512] usbcore: registered new interface driver lirc_mceusb [ 9.065407] i2c i2c-4: nForce2 SMBus adapter at 0x5000 [ 9.065432] i2c i2c-5: nForce2 SMBus adapter at 0x5100 [ 9.316482] [drm] nouveau 0000:04:00.0: PFIFO_INTR 0x00000010 - Ch 1 [ 9.650461] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 23 [ 9.650469] HDA Intel 0000:00:10.1: PCI INT B -> Link[AAZA] -> GSI 23 (level, low) -> IRQ 23 [ 9.650473] hda_intel: Disable MSI for Nvidia chipset [ 9.650512] HDA Intel 0000:00:10.1: setting latency timer to 64 [ 10.278247] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:10.1/input/input6 [ 12.049624] __ratelimit: 56 callbacks suppressed [ 12.049630] type=1505 audit(1283904275.977:6): operation="profile_load" pid=1284 name="/usr/share/gdm/guest-session/Xsession" [ 12.051618] type=1505 audit(1283904275.977:7): operation="profile_replace" pid=1285 name="/sbin/dhclient3" [ 12.052468] type=1505 audit(1283904275.981:8): operation="profile_replace" pid=1285 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 12.053518] type=1505 audit(1283904275.981:9): operation="profile_replace" pid=1285 name="/usr/lib/connman/scripts/dhclient-script" [ 12.075075] type=1505 audit(1283904276.001:10): operation="profile_load" pid=1286 name="/usr/bin/evince" [ 12.084185] type=1505 audit(1283904276.013:11): operation="profile_load" pid=1286 name="/usr/bin/evince-previewer" [ 12.089650] type=1505 audit(1283904276.017:12): operation="profile_load" pid=1286 name="/usr/bin/evince-thumbnailer" [ 12.116792] type=1505 audit(1283904276.045:13): operation="profile_load" pid=1288 name="/usr/bin/freshclam" [ 12.165054] type=1505 audit(1283904276.093:14): operation="profile_load" pid=1289 name="/usr/lib/cups/backend/cups-pdf" [ 12.165862] type=1505 audit(1283904276.093:15): operation="profile_load" pid=1289 name="/usr/sbin/cupsd" [ 12.235665] skge eth0: enabling interface [ 12.238967] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 13.239892] vgaarb: device changed decodes: PCI:0000:04:00.0,olddecodes=io+mem,decodes=none:owns=none [ 13.239899] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 13.692683] [drm] nouveau 0000:01:00.0: Allocating FIFO number 2 [ 13.696227] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 2 [ 14.543033] skge eth0: Link is up at 1000 Mbps, full duplex, flow control both [ 14.543224] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 15.535973] CPUFREQ: Per core ondemand sysfs interface is deprecated - ignore_nice_load [ 18.959183] CPU0 attaching NULL sched-domain. [ 18.959193] CPU1 attaching NULL sched-domain. [ 19.004646] CPU0 attaching sched-domain: [ 19.004651] domain 0: span 0-1 level MC [ 19.004654] groups: 0 1 [ 19.004660] CPU1 attaching sched-domain: [ 19.004662] domain 0: span 0-1 level MC [ 19.004665] groups: 1 0 [ 20.333146] CPU0 attaching NULL sched-domain. [ 20.333153] CPU1 attaching NULL sched-domain. [ 20.364606] CPU0 attaching sched-domain: [ 20.364611] domain 0: span 0-1 level MC [ 20.364614] groups: 0 1 [ 20.364620] CPU1 attaching sched-domain: [ 20.364622] domain 0: span 0-1 level MC [ 20.364625] groups: 1 0 [ 22.936509] cdrom: This disc doesn't have any tracks I recognize! [ 274.540538] ata2.00: qc timeout (cmd 0xa0) [ 274.540552] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 274.540559] sr 1:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00 [ 274.540579] ata2.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0 [ 274.540581] res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout) [ 274.540586] ata2.00: status: { DRDY ERR } [ 274.540619] ata2: soft resetting link [ 278.096419] ata2: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc700c0c0) ACPI=0x701f (60:60:0x1f) [ 278.096425] ata2: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc700c0c0) ACPI=0x701f (60:60:0x1f) [ 278.112367] ata2.00: configured for UDMA/33 [ 278.129772] ata2.01: configured for UDMA/33 [ 278.156357] ata2: EH complete [ 299.572051] ata2.00: qc timeout (cmd 0xa0) [ 299.572065] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 299.572072] sr 1:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00 [ 299.572092] ata2.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0 [ 299.572094] res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout) [ 299.572099] ata2.00: status: { DRDY ERR } [ 299.572132] ata2: soft resetting link [ 304.560916] ata2: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc700c0c0) ACPI=0x701f (60:60:0x1f) [ 304.560921] ata2: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc700c0c0) ACPI=0x701f (60:60:0x1f) [ 304.576834] ata2.00: configured for UDMA/33 [ 304.593824] ata2.01: configured for UDMA/33 [ 304.601900] ata2: EH complete [ 389.704630] ata2.00: qc timeout (cmd 0xa0) [ 389.704642] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 389.704647] sr 1:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00 [ 389.704659] ata2.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0 [ 389.704660] res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout) [ 389.704663] ata2.00: status: { DRDY ERR } [ 389.704688] ata2: soft resetting link [ 394.704901] ata2: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc700c0c0) ACPI=0x701f (60:60:0x1f) [ 394.704910] ata2: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc700c0c0) ACPI=0x701f (60:60:0x1f) [ 394.720819] ata2.00: configured for UDMA/33 [ 394.742625] ata2.01: configured for UDMA/33 [ 394.764108] ata2: EH complete [ 424.775606] ata2.00: qc timeout (cmd 0xa0) [ 424.775617] ata2.00: limiting speed to UDMA/25:PIO4 [ 424.775622] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 424.775627] sr 1:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00 [ 424.775639] ata2.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0 [ 424.775640] res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout) [ 424.775643] ata2.00: status: { DRDY ERR } [ 424.775668] ata2: soft resetting link [ 428.148450] ata2: nv_mode_filter: 0x339f&0x739f->0x339f, BIOS=0x7000 (0xc700c0c0) ACPI=0x701f (60:60:0x1f) [ 428.148459] ata2: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc700c0c0) ACPI=0x701f (60:60:0x1f) [ 428.164322] ata2.00: configured for UDMA/25 [ 429.775054] ata2.01: configured for UDMA/33 [ 429.775690] ata2: EH complete [ 444.820037] ata2.00: qc timeout (cmd 0xa0) [ 444.820053] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 444.820060] sr 1:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00 [ 444.820079] ata2.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0 [ 444.820082] res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout) [ 444.820087] ata2.00: status: { DRDY ERR } [ 444.820120] ata2: soft resetting link [ 454.832038] ata2.00: qc timeout (cmd 0xa1) [ 454.832046] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4) [ 454.832049] ata2.00: revalidation failed (errno=-5) [ 459.872023] ata2: link is slow to respond, please be patient (ready=0) [ 464.856022] ata2: device not ready (errno=-16), forcing hardreset [ 464.856033] ata2: soft resetting link [ 470.052023] ata2: link is slow to respond, please be patient (ready=0) [ 474.868546] ata2: SRST failed (errno=-16) [ 474.868559] ata2: soft resetting link [ 480.064025] ata2: link is slow to respond, please be patient (ready=0) [ 484.880520] ata2: SRST failed (errno=-16) [ 484.880531] ata2: soft resetting link [ 490.076019] ata2: link is slow to respond, please be patient (ready=0) [ 519.924020] ata2: SRST failed (errno=-16) [ 519.924032] ata2: soft resetting link [ 524.952050] ata2: SRST failed (errno=-16) [ 524.952058] ata2: reset failed, giving up [ 524.952064] ata2.00: disabled [ 524.952068] ata2.01: disabled [ 529.992023] ata2: link is slow to respond, please be patient (ready=0) [ 534.976018] ata2: device not ready (errno=-16), forcing hardreset [ 534.976030] ata2: soft resetting link [ 540.172037] ata2: link is slow to respond, please be patient (ready=0) [ 544.988022] ata2: SRST failed (errno=-16) [ 544.988035] ata2: soft resetting link [ 550.184029] ata2: link is slow to respond, please be patient (ready=0) [ 555.000038] ata2: SRST failed (errno=-16) [ 555.000050] ata2: soft resetting link [ 560.196158] ata2: link is slow to respond, please be patient (ready=0) [ 590.044024] ata2: SRST failed (errno=-16) [ 590.044037] ata2: soft resetting link [ 595.072076] ata2: SRST failed (errno=-16) [ 595.072084] ata2: reset failed, giving up [ 595.072097] ata2: EH complete [ 595.072272] sd 1:0:1:0: [sdb] READ CAPACITY(16) failed [ 595.072276] sd 1:0:1:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [ 595.072283] sd 1:0:1:0: [sdb] Sense not available. [ 595.072342] sd 1:0:1:0: [sdb] READ CAPACITY failed [ 595.072346] sd 1:0:1:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [ 595.072352] sd 1:0:1:0: [sdb] Sense not available. [ 595.072442] sd 1:0:1:0: [sdb] Got wrong page [ 595.072446] sd 1:0:1:0: [sdb] Assuming drive cache: write through [ 595.072455] sdb: detected capacity change from 500107862016 to 0 [ 2723.366118] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [ 2723.368313] SGI XFS Quota Management subsystem [ 2723.417697] JFS: nTxBlock = 8192, nTxLock = 65536 [ 2723.418373] __ratelimit: 9 callbacks suppressed [ 2723.418377] vmap allocation for size 4198400 failed: use vmalloc= to increase size. [ 2723.471979] NTFS driver 2.1.29 [Flags: R/O MODULE]. [ 2723.505073] QNX4 filesystem 0.2.3 registered. [ 2723.597395] Btrfs loaded [ 2730.230440] EXT4-fs (sdf3): mounted filesystem with ordered data mode [ 2763.406993] JFS: nTxBlock = 8192, nTxLock = 65536 [ 2763.407471] vmap allocation for size 4198400 failed: use vmalloc= to increase size. [ 2769.337354] EXT4-fs (sdf3): mounted filesystem with ordered data mode [ 2797.059700] type=1505 audit(1283907060.985:19): operation="profile_replace" pid=25466 name="/usr/lib/cups/backend/cups-pdf" [ 2797.064670] type=1505 audit(1283907060.993:20): operation="profile_replace" pid=25466 name="/usr/sbin/cupsd" [ 2816.725498] type=1505 audit(1283907080.653:21): operation="profile_replace" pid=25605 name="/usr/bin/evince" [ 2816.726863] type=1505 audit(1283907080.653:22): operation="profile_replace" pid=25605 name="/usr/bin/evince-previewer" [ 2816.727619] type=1505 audit(1283907080.653:23): operation="profile_replace" pid=25605 name="/usr/bin/evince-thumbnailer"