[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.38-8-generic (buildd@allspice) (gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-8ubuntu3) ) #42-Ubuntu SMP Mon Apr 11 03:31:24 UTC 2011 (Ubuntu 2.6.38-8.42-generic 2.6.38.2) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-2.6.38-8-generic root=UUID=73782a03-b772-4637-afc1-101e5152df00 ro quiet splash vt.handoff=7 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e2000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cff90000 (usable) [ 0.000000] BIOS-e820: 00000000cff90000 - 00000000cff9e000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cff9e000 - 00000000cffe0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cffe0000 - 00000000d0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI present. [ 0.000000] DMI: MSI MS-7599/870A-G54 (MS-7599), BIOS V17.1 04/14/2010 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x130000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000130000000 aka 4864M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xcff90 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: 0000000000000000-00000000cff90000 [ 0.000000] 0000000000 - 00c0000000 page 1G [ 0.000000] 00c0000000 - 00cfe00000 page 2M [ 0.000000] 00cfe00000 - 00cff90000 page 4k [ 0.000000] kernel direct mapping tables up to cff90000 @ 1fffd000-20000000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000130000000 [ 0.000000] 0100000000 - 0130000000 page 2M [ 0.000000] kernel direct mapping tables up to 130000000 @ cff8e000-cff90000 [ 0.000000] RAMDISK: 366e0000 - 37368000 [ 0.000000] ACPI: RSDP 00000000000fa960 00014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT 00000000cff90000 00040 (v01 7599MS A7599300 20100414 MSFT 00000097) [ 0.000000] ACPI: FACP 00000000cff90200 00084 (v01 7599MS A7599300 20100414 MSFT 00000097) [ 0.000000] ACPI: DSDT 00000000cff905d0 06427 (v01 A7599 A7599300 00000300 INTL 20051117) [ 0.000000] ACPI: FACS 00000000cff9e000 00040 [ 0.000000] ACPI: APIC 00000000cff90390 0007C (v01 7599MS A7599300 20100414 MSFT 00000097) [ 0.000000] ACPI: MCFG 00000000cff90410 0003C (v01 7599MS OEMMCFG 20100414 MSFT 00000097) [ 0.000000] ACPI: OEMB 00000000cff9e040 00072 (v01 7599MS A7599300 20100414 MSFT 00000097) [ 0.000000] ACPI: SRAT 00000000cff9a5d0 000E8 (v03 AMD FAM_F_10 00000002 AMD 00000001) [ 0.000000] ACPI: HPET 00000000cff9a6c0 00038 (v01 7599MS OEMHPET 20100414 MSFT 00000097) [ 0.000000] ACPI: SSDT 00000000cff9a700 0088C (v01 A M I POWERNOW 00000001 AMD 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0 [ 0.000000] SRAT: Node 0 PXM 0 0-a0000 [ 0.000000] SRAT: Node 0 PXM 0 100000-d0000000 [ 0.000000] SRAT: Node 0 PXM 0 100000000-130000000 [ 0.000000] SRAT: Node 0 [0,a0000) + [100000,d0000000) -> [0,d0000000) [ 0.000000] SRAT: Node 0 [0,d0000000) + [100000000,130000000) -> [0,130000000) [ 0.000000] NUMA: Using 63 for the hash shift. [ 0.000000] Initmem setup node 0 0000000000000000-0000000130000000 [ 0.000000] NODE_DATA [000000012fffb000 - 000000012fffffff] [ 0.000000] [ffffea0000000000-ffffea00043fffff] PMD -> [ffff88012be00000-ffff88012f7fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00130000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000cff90 [ 0.000000] 0: 0x00100000 -> 0x00130000 [ 0.000000] On node 0 totalpages: 1048351 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 6 pages reserved [ 0.000000] DMA zone: 3921 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 833480 pages, LIFO batch:31 [ 0.000000] Normal zone: 2688 pages used for memmap [ 0.000000] Normal zone: 193920 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000 [ 0.000000] SMP: Allowing 6 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e2000 [ 0.000000] PM: Registered nosave memory: 00000000000e2000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000cff90000 - 00000000cff9e000 [ 0.000000] PM: Registered nosave memory: 00000000cff9e000 - 00000000cffe0000 [ 0.000000] PM: Registered nosave memory: 00000000cffe0000 - 00000000d0000000 [ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000fff00000 [ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:2ff00000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:6 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff8800cfc00000 s84416 r8192 d22080 u262144 [ 0.000000] pcpu-alloc: s84416 r8192 d22080 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - - [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031321 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.38-8-generic root=UUID=73782a03-b772-4637-afc1-101e5152df00 ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ c4000000 size 32 MB [ 0.000000] Aperture pointing to e820 RAM. Ignoring. [ 0.000000] Your BIOS doesn't leave a aperture memory hole [ 0.000000] Please enable the IOMMU option in the BIOS setup [ 0.000000] This costs you 64 MB of RAM [ 0.000000] Mapping aperture over 65536 KB of RAM @ c4000000 [ 0.000000] PM: Registered nosave memory: 00000000c4000000 - 00000000c8000000 [ 0.000000] Memory: 3975476k/4980736k available (5940k kernel code, 787332k absent, 217928k reserved, 5017k data, 956k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] NR_IRQS:16640 nr_irqs:728 16 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 41943040 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 3199.794 MHz processor. [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 6399.58 BogoMIPS (lpj=31997940) [ 0.000006] pid_max: default: 32768 minimum: 301 [ 0.000022] Security Framework initialized [ 0.000033] AppArmor: AppArmor initialized [ 0.000034] Yama: becoming mindful. [ 0.010007] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.011151] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.011640] Mount-cache hash table entries: 256 [ 0.011731] Initializing cgroup subsys ns [ 0.011733] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup. [ 0.011735] Initializing cgroup subsys cpuacct [ 0.011739] Initializing cgroup subsys memory [ 0.011745] Initializing cgroup subsys devices [ 0.011747] Initializing cgroup subsys freezer [ 0.011748] Initializing cgroup subsys net_cls [ 0.011750] Initializing cgroup subsys blkio [ 0.011772] tseg: 0000000000 [ 0.011783] CPU: Physical Processor ID: 0 [ 0.011784] CPU: Processor Core ID: 0 [ 0.011785] mce: CPU supports 6 MCE banks [ 0.011792] using C1E aware idle routine [ 0.012981] ACPI: Core revision 20110112 [ 0.016444] ftrace: allocating 24314 entries in 96 pages [ 0.020059] Setting APIC routing to flat [ 0.020336] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.121949] CPU0: AMD Phenom(tm) II X4 955 Processor stepping 02 [ 0.130000] Performance Events: AMD PMU driver. [ 0.130000] ... version: 0 [ 0.130000] ... bit width: 48 [ 0.130000] ... generic registers: 4 [ 0.130000] ... value mask: 0000ffffffffffff [ 0.130000] ... max period: 00007fffffffffff [ 0.130000] ... fixed-purpose events: 0 [ 0.130000] ... event mask: 000000000000000f [ 0.130000] Booting Node 0, Processors #1 [ 0.290011] System has AMD C1E enabled [ 0.290022] Switch to broadcast mode on CPU1 [ 0.290051] #2 [ 0.460014] Switch to broadcast mode on CPU2 [ 0.460053] #3 [ 0.630014] Brought up 4 CPUs [ 0.630016] Total of 4 processors activated (25599.56 BogoMIPS). [ 0.630013] Switch to broadcast mode on CPU3 [ 0.631745] Switch to broadcast mode on CPU0 [ 0.631745] devtmpfs: initialized [ 0.631745] print_constraints: dummy: [ 0.631745] Time: 21:31:48 Date: 04/20/11 [ 0.631745] NET: Registered protocol family 16 [ 0.631745] node 0 link 0: io port [1000, ffffff] [ 0.631745] TOM: 00000000d0000000 aka 3328M [ 0.631745] Fam 10h mmconf [e0000000, efffffff] [ 0.631745] node 0 link 0: mmio [e0000000, efffffff] ==> none [ 0.631745] node 0 link 0: mmio [f0000000, ffffffff] [ 0.631745] node 0 link 0: mmio [a0000, bffff] [ 0.631745] node 0 link 0: mmio [d0000000, dfffffff] [ 0.631745] TOM2: 0000000130000000 aka 4864M [ 0.631745] bus: [00, 07] on node 0 link 0 [ 0.631745] bus: 00 index 0 [io 0x0000-0xffff] [ 0.631745] bus: 00 index 1 [mem 0xf0000000-0xffffffff] [ 0.631745] bus: 00 index 2 [mem 0x000a0000-0x000bffff] [ 0.631745] bus: 00 index 3 [mem 0xd0000000-0xdfffffff] [ 0.631745] bus: 00 index 4 [mem 0x130000000-0xfcffffffff] [ 0.631745] Extended Config Space enabled on 1 nodes [ 0.631745] ACPI: bus type pci registered [ 0.631745] Trying to unpack rootfs image as initramfs... [ 0.631745] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.631745] PCI: not using MMCONFIG [ 0.631745] PCI: Using configuration type 1 for base access [ 0.631745] PCI: Using configuration type 1 for extended access [ 0.631745] bio: create slab at 0 [ 0.631745] ACPI: EC: Look up EC in DSDT [ 0.631745] ACPI: Executed 3 blocks of module-level executable AML code [ 0.730215] ACPI: Interpreter enabled [ 0.730219] ACPI: (supports S0 S1 S4 S5) [ 0.730233] ACPI: Using IOAPIC for interrupt routing [ 0.730257] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.730693] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.794841] Freeing initrd memory: 12832k freed [ 1.070079] ACPI: No dock devices found. [ 1.070081] HEST: Table not found. [ 1.070084] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.070215] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 1.070334] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] [ 1.070336] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] [ 1.070338] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] [ 1.070339] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] [ 1.070341] pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xdfffffff] [ 1.070343] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff] [ 1.070354] pci 0000:00:00.0: [1002:5957] type 0 class 0x000600 [ 1.070365] pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit] [ 1.070390] pci 0000:00:02.0: [1002:5978] type 1 class 0x000604 [ 1.070412] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 1.070414] pci 0000:00:02.0: PME# disabled [ 1.070432] pci 0000:00:0a.0: [1002:597f] type 1 class 0x000604 [ 1.070452] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 1.070454] pci 0000:00:0a.0: PME# disabled [ 1.070478] pci 0000:00:11.0: [1002:4390] type 0 class 0x000101 [ 1.070496] pci 0000:00:11.0: reg 10: [io 0xa000-0xa007] [ 1.070505] pci 0000:00:11.0: reg 14: [io 0x9000-0x9003] [ 1.070513] pci 0000:00:11.0: reg 18: [io 0x8000-0x8007] [ 1.070521] pci 0000:00:11.0: reg 1c: [io 0x7000-0x7003] [ 1.070529] pci 0000:00:11.0: reg 20: [io 0x6000-0x600f] [ 1.070537] pci 0000:00:11.0: reg 24: [mem 0xfe5ffc00-0xfe5fffff] [ 1.070555] pci 0000:00:11.0: set SATA to AHCI mode [ 1.070593] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03 [ 1.070604] pci 0000:00:12.0: reg 10: [mem 0xfe5fe000-0xfe5fefff] [ 1.070664] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03 [ 1.070680] pci 0000:00:12.2: reg 10: [mem 0xfe5ff800-0xfe5ff8ff] [ 1.070739] pci 0000:00:12.2: supports D1 D2 [ 1.070741] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 1.070744] pci 0000:00:12.2: PME# disabled [ 1.070761] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03 [ 1.070773] pci 0000:00:13.0: reg 10: [mem 0xfe5fd000-0xfe5fdfff] [ 1.070833] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03 [ 1.070849] pci 0000:00:13.2: reg 10: [mem 0xfe5ff400-0xfe5ff4ff] [ 1.070909] pci 0000:00:13.2: supports D1 D2 [ 1.070910] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 1.070913] pci 0000:00:13.2: PME# disabled [ 1.070931] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05 [ 1.070993] pci 0000:00:14.1: [1002:439c] type 0 class 0x000101 [ 1.071005] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007] [ 1.071013] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003] [ 1.071021] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007] [ 1.071029] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003] [ 1.071038] pci 0000:00:14.1: reg 20: [io 0xff00-0xff0f] [ 1.071072] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403 [ 1.071090] pci 0000:00:14.2: reg 10: [mem 0xfe5f8000-0xfe5fbfff 64bit] [ 1.071139] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 1.071142] pci 0000:00:14.2: PME# disabled [ 1.071153] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601 [ 1.071216] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604 [ 1.071250] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03 [ 1.071261] pci 0000:00:14.5: reg 10: [mem 0xfe5fc000-0xfe5fcfff] [ 1.071320] pci 0000:00:15.0: [1002:43a0] type 1 class 0x000604 [ 1.071368] pci 0000:00:15.0: supports D1 D2 [ 1.071389] pci 0000:00:15.1: [1002:43a1] type 1 class 0x000604 [ 1.071437] pci 0000:00:15.1: supports D1 D2 [ 1.071461] pci 0000:00:16.0: [1002:4397] type 0 class 0x000c03 [ 1.071472] pci 0000:00:16.0: reg 10: [mem 0xfe5f7000-0xfe5f7fff] [ 1.071531] pci 0000:00:16.2: [1002:4396] type 0 class 0x000c03 [ 1.071547] pci 0000:00:16.2: reg 10: [mem 0xfe5ff000-0xfe5ff0ff] [ 1.071607] pci 0000:00:16.2: supports D1 D2 [ 1.071608] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot [ 1.071611] pci 0000:00:16.2: PME# disabled [ 1.071627] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600 [ 1.071639] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600 [ 1.071649] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600 [ 1.071659] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600 [ 1.071670] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600 [ 1.071712] pci 0000:01:00.0: [1002:68d8] type 0 class 0x000300 [ 1.071723] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref] [ 1.071731] pci 0000:01:00.0: reg 18: [mem 0xfe6e0000-0xfe6fffff 64bit] [ 1.071737] pci 0000:01:00.0: reg 20: [io 0xb000-0xb0ff] [ 1.071748] pci 0000:01:00.0: reg 30: [mem 0xfe6c0000-0xfe6dffff pref] [ 1.071762] pci 0000:01:00.0: supports D1 D2 [ 1.071778] pci 0000:01:00.1: [1002:aa60] type 0 class 0x000403 [ 1.071789] pci 0000:01:00.1: reg 10: [mem 0xfe6bc000-0xfe6bffff 64bit] [ 1.071825] pci 0000:01:00.1: supports D1 D2 [ 1.090009] pci 0000:00:02.0: PCI bridge to [bus 01-01] [ 1.090012] pci 0000:00:02.0: bridge window [io 0xb000-0xbfff] [ 1.090014] pci 0000:00:02.0: bridge window [mem 0xfe600000-0xfe6fffff] [ 1.090017] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 1.090053] pci 0000:02:00.0: [1033:0194] type 0 class 0x000c03 [ 1.090073] pci 0000:02:00.0: reg 10: [mem 0xfe7fe000-0xfe7fffff 64bit] [ 1.090151] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 1.090155] pci 0000:02:00.0: PME# disabled [ 1.110010] pci 0000:00:0a.0: PCI bridge to [bus 02-02] [ 1.110013] pci 0000:00:0a.0: bridge window [io 0xf000-0x0000] (disabled) [ 1.110015] pci 0000:00:0a.0: bridge window [mem 0xfe700000-0xfe7fffff] [ 1.110018] pci 0000:00:0a.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 1.110047] pci 0000:03:06.0: [1814:0301] type 0 class 0x000280 [ 1.110066] pci 0000:03:06.0: reg 10: [mem 0xfe8f0000-0xfe8f7fff] [ 1.110182] pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode) [ 1.110185] pci 0000:00:14.4: bridge window [io 0xf000-0x0000] (disabled) [ 1.110189] pci 0000:00:14.4: bridge window [mem 0xfe800000-0xfe8fffff] [ 1.110192] pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 1.110194] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 1.110196] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 1.110197] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 1.110199] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode) [ 1.110201] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xdfffffff] (subtractive decode) [ 1.110203] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode) [ 1.110261] pci 0000:04:00.0: [197b:2368] type 0 class 0x000101 [ 1.110291] pci 0000:04:00.0: reg 10: [io 0xd800-0xd807] [ 1.110304] pci 0000:04:00.0: reg 14: [io 0xd400-0xd403] [ 1.110318] pci 0000:04:00.0: reg 18: [io 0xd000-0xd007] [ 1.110331] pci 0000:04:00.0: reg 1c: [io 0xc800-0xc803] [ 1.110345] pci 0000:04:00.0: reg 20: [io 0xc400-0xc40f] [ 1.110418] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 1.110427] pci 0000:00:15.0: PCI bridge to [bus 04-04] [ 1.110432] pci 0000:00:15.0: bridge window [io 0xc000-0xdfff] [ 1.110435] pci 0000:00:15.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 1.110440] pci 0000:00:15.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 1.110498] pci 0000:05:00.0: [10ec:8168] type 0 class 0x000200 [ 1.110514] pci 0000:05:00.0: reg 10: [io 0xe800-0xe8ff] [ 1.110542] pci 0000:05:00.0: reg 18: [mem 0xfdfff000-0xfdffffff 64bit pref] [ 1.110560] pci 0000:05:00.0: reg 20: [mem 0xfdff8000-0xfdffbfff 64bit pref] [ 1.110572] pci 0000:05:00.0: reg 30: [mem 0xfe9e0000-0xfe9fffff pref] [ 1.110610] pci 0000:05:00.0: supports D1 D2 [ 1.110611] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.110616] pci 0000:05:00.0: PME# disabled [ 1.130012] pci 0000:00:15.1: PCI bridge to [bus 05-05] [ 1.130017] pci 0000:00:15.1: bridge window [io 0xe000-0xefff] [ 1.130020] pci 0000:00:15.1: bridge window [mem 0xfe900000-0xfe9fffff] [ 1.130025] pci 0000:00:15.1: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref] [ 1.130041] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 1.130167] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT] [ 1.130193] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT] [ 1.130218] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT] [ 1.130264] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE20._PRT] [ 1.130286] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE21._PRT] [ 1.130363] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 1.130460] pci0000:00: ACPI _OSC control (0x1d) granted [ 1.134073] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 *10 11 14 15) [ 1.134117] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 *7 10 11 14 15) [ 1.134161] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 14 15) [ 1.134205] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 *11 14 15) [ 1.134239] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0 [ 1.134266] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 *11 14 15) [ 1.134291] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0 [ 1.134316] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0 [ 1.134392] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 1.134395] vgaarb: loaded [ 1.134514] SCSI subsystem initialized [ 1.134530] libata version 3.00 loaded. [ 1.134530] usbcore: registered new interface driver usbfs [ 1.134530] usbcore: registered new interface driver hub [ 1.134530] usbcore: registered new device driver usb [ 1.134530] wmi: Mapper loaded [ 1.134530] PCI: Using ACPI for IRQ routing [ 1.134530] PCI: pci_cache_line_size set to 64 bytes [ 1.134530] pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit] [ 1.134530] reserve RAM buffer: 000000000009f000 - 000000000009ffff [ 1.134530] reserve RAM buffer: 00000000cff90000 - 00000000cfffffff [ 1.134530] NetLabel: Initializing [ 1.134530] NetLabel: domain hash size = 128 [ 1.134530] NetLabel: protocols = UNLABELED CIPSOv4 [ 1.134530] NetLabel: unlabeled traffic allowed by default [ 1.134530] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 1.134530] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 1.134530] Switching to clocksource hpet [ 1.134530] Switched to NOHz mode on CPU #2 [ 1.134530] Switched to NOHz mode on CPU #3 [ 1.134530] Switched to NOHz mode on CPU #0 [ 1.134530] Switched to NOHz mode on CPU #1 [ 1.134530] AppArmor: AppArmor Filesystem Enabled [ 1.134530] pnp: PnP ACPI init [ 1.134530] ACPI: bus type pnp registered [ 1.134530] pnp 00:00: [bus 00-ff] [ 1.134530] pnp 00:00: [io 0x0cf8-0x0cff] [ 1.134530] pnp 00:00: [io 0x0000-0x0cf7 window] [ 1.134530] pnp 00:00: [io 0x0d00-0xffff window] [ 1.134530] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 1.134530] pnp 00:00: [mem 0x000d0000-0x000dffff window] [ 1.134530] pnp 00:00: [mem 0xd0000000-0xdfffffff window] [ 1.134530] pnp 00:00: [mem 0xf0000000-0xfebfffff window] [ 1.134530] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 1.134731] pnp 00:01: [dma 4] [ 1.134732] pnp 00:01: [io 0x0000-0x000f] [ 1.134734] pnp 00:01: [io 0x0081-0x0083] [ 1.134735] pnp 00:01: [io 0x0087] [ 1.134737] pnp 00:01: [io 0x0089-0x008b] [ 1.134738] pnp 00:01: [io 0x008f] [ 1.134739] pnp 00:01: [io 0x00c0-0x00df] [ 1.134762] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 1.134769] pnp 00:02: [io 0x0070-0x0071] [ 1.134776] pnp 00:02: [irq 8] [ 1.134799] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 1.134804] pnp 00:03: [io 0x0061] [ 1.134825] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active) [ 1.134830] pnp 00:04: [io 0x00f0-0x00ff] [ 1.134833] pnp 00:04: [irq 13] [ 1.134855] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active) [ 1.135009] pnp 00:05: [io 0x03f8-0x03ff] [ 1.135013] pnp 00:05: [irq 4] [ 1.135014] pnp 00:05: [dma 0 disabled] [ 1.135059] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) [ 1.135140] pnp 00:06: [mem 0xfed00000-0xfed003ff] [ 1.135165] pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active) [ 1.135212] pnp 00:07: [mem 0xfec00000-0xfec00fff] [ 1.135214] pnp 00:07: [mem 0xfee00000-0xfee00fff] [ 1.135255] system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved [ 1.135257] system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved [ 1.135259] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.135344] pnp 00:08: [io 0x0010-0x001f] [ 1.135345] pnp 00:08: [io 0x0022-0x003f] [ 1.135346] pnp 00:08: [io 0x0062-0x0063] [ 1.135348] pnp 00:08: [io 0x0065-0x006f] [ 1.135349] pnp 00:08: [io 0x0072-0x007f] [ 1.135350] pnp 00:08: [io 0x0080] [ 1.135351] pnp 00:08: [io 0x0084-0x0086] [ 1.135353] pnp 00:08: [io 0x0088] [ 1.135354] pnp 00:08: [io 0x008c-0x008e] [ 1.135355] pnp 00:08: [io 0x0090-0x009f] [ 1.135357] pnp 00:08: [io 0x00a2-0x00bf] [ 1.135358] pnp 00:08: [io 0x00b1] [ 1.135359] pnp 00:08: [io 0x00e0-0x00ef] [ 1.135360] pnp 00:08: [io 0x04d0-0x04d1] [ 1.135362] pnp 00:08: [io 0x040b] [ 1.135363] pnp 00:08: [io 0x04d6] [ 1.135364] pnp 00:08: [io 0x0c00-0x0c01] [ 1.135366] pnp 00:08: [io 0x0c14] [ 1.135367] pnp 00:08: [io 0x0c50-0x0c51] [ 1.135368] pnp 00:08: [io 0x0c52] [ 1.135369] pnp 00:08: [io 0x0c6c] [ 1.135370] pnp 00:08: [io 0x0c6f] [ 1.135372] pnp 00:08: [io 0x0cd0-0x0cd1] [ 1.135373] pnp 00:08: [io 0x0cd2-0x0cd3] [ 1.135374] pnp 00:08: [io 0x0cd4-0x0cd5] [ 1.135376] pnp 00:08: [io 0x0cd6-0x0cd7] [ 1.135377] pnp 00:08: [io 0x0cd8-0x0cdf] [ 1.135378] pnp 00:08: [io 0x0800-0x089f] [ 1.135380] pnp 00:08: [io 0x0000-0xffffffffffffffff disabled] [ 1.135381] pnp 00:08: [io 0x0b00-0x0b1f] [ 1.135383] pnp 00:08: [io 0x0b20-0x0b3f] [ 1.135384] pnp 00:08: [io 0x0900-0x090f] [ 1.135385] pnp 00:08: [io 0x0910-0x091f] [ 1.135387] pnp 00:08: [io 0xfe00-0xfefe] [ 1.135388] pnp 00:08: [io 0x0060-0x005f disabled] [ 1.135391] pnp 00:08: [io 0x0064-0x0063 disabled] [ 1.135393] pnp 00:08: [mem 0xffb80000-0xffbfffff] [ 1.135394] pnp 00:08: [mem 0xfec10000-0xfec1001f] [ 1.135395] pnp 00:08: [mem 0xfed80000-0xfed80fff] [ 1.135397] pnp 00:08: [mem 0xcf800000-0xcfffffff] [ 1.135399] pnp 00:08: [mem 0x00000000-0xffffffffffffffff disabled] [ 1.135477] system 00:08: [io 0x04d0-0x04d1] has been reserved [ 1.135479] system 00:08: [io 0x040b] has been reserved [ 1.135481] system 00:08: [io 0x04d6] has been reserved [ 1.135483] system 00:08: [io 0x0c00-0x0c01] has been reserved [ 1.135484] system 00:08: [io 0x0c14] has been reserved [ 1.135486] system 00:08: [io 0x0c50-0x0c51] has been reserved [ 1.135488] system 00:08: [io 0x0c52] has been reserved [ 1.135490] system 00:08: [io 0x0c6c] has been reserved [ 1.135491] system 00:08: [io 0x0c6f] has been reserved [ 1.135493] system 00:08: [io 0x0cd0-0x0cd1] has been reserved [ 1.135495] system 00:08: [io 0x0cd2-0x0cd3] has been reserved [ 1.135497] system 00:08: [io 0x0cd4-0x0cd5] has been reserved [ 1.135499] system 00:08: [io 0x0cd6-0x0cd7] has been reserved [ 1.135501] system 00:08: [io 0x0cd8-0x0cdf] has been reserved [ 1.135503] system 00:08: [io 0x0800-0x089f] has been reserved [ 1.135505] system 00:08: [io 0x0b00-0x0b1f] has been reserved [ 1.135506] system 00:08: [io 0x0b20-0x0b3f] has been reserved [ 1.135508] system 00:08: [io 0x0900-0x090f] has been reserved [ 1.135510] system 00:08: [io 0x0910-0x091f] has been reserved [ 1.135512] system 00:08: [io 0xfe00-0xfefe] has been reserved [ 1.135515] system 00:08: [mem 0xffb80000-0xffbfffff] has been reserved [ 1.135517] system 00:08: [mem 0xfec10000-0xfec1001f] has been reserved [ 1.135519] system 00:08: [mem 0xfed80000-0xfed80fff] has been reserved [ 1.135521] system 00:08: [mem 0xcf800000-0xcfffffff] could not be reserved [ 1.135523] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.135540] pnp 00:09: [io 0x0060] [ 1.135541] pnp 00:09: [io 0x0064] [ 1.135544] pnp 00:09: [irq 1] [ 1.135567] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 1.135629] pnp 00:0a: [io 0x0000-0xffffffffffffffff disabled] [ 1.135631] pnp 00:0a: [io 0x0600-0x06df] [ 1.135632] pnp 00:0a: [io 0x0ae0-0x0aef] [ 1.135670] system 00:0a: [io 0x0600-0x06df] has been reserved [ 1.135673] system 00:0a: [io 0x0ae0-0x0aef] has been reserved [ 1.135675] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.135702] pnp 00:0b: [mem 0xe0000000-0xefffffff] [ 1.135737] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved [ 1.135740] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.135807] pnp 00:0c: [mem 0x00000000-0x0009ffff] [ 1.135809] pnp 00:0c: [mem 0x000c0000-0x000cffff] [ 1.135810] pnp 00:0c: [mem 0x000e0000-0x000fffff] [ 1.135812] pnp 00:0c: [mem 0x00100000-0xcfffffff] [ 1.135813] pnp 00:0c: [mem 0xfec00000-0xffffffff] [ 1.135817] pnp 00:0c: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 1.135820] pnp 00:0c: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 1.135822] pnp 00:0c: disabling [mem 0x000e0000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 1.135825] pnp 00:0c: disabling [mem 0x00100000-0xcfffffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 1.135865] system 00:0c: [mem 0xfec00000-0xffffffff] could not be reserved [ 1.135867] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active) [ 1.135928] pnp: PnP ACPI: found 13 devices [ 1.135929] ACPI: ACPI bus type pnp unregistered [ 1.141504] pci 0000:00:02.0: PCI bridge to [bus 01-01] [ 1.141507] pci 0000:00:02.0: bridge window [io 0xb000-0xbfff] [ 1.141509] pci 0000:00:02.0: bridge window [mem 0xfe600000-0xfe6fffff] [ 1.141512] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 1.141515] pci 0000:00:0a.0: PCI bridge to [bus 02-02] [ 1.141516] pci 0000:00:0a.0: bridge window [io disabled] [ 1.141518] pci 0000:00:0a.0: bridge window [mem 0xfe700000-0xfe7fffff] [ 1.141520] pci 0000:00:0a.0: bridge window [mem pref disabled] [ 1.141523] pci 0000:00:14.4: PCI bridge to [bus 03-03] [ 1.141524] pci 0000:00:14.4: bridge window [io disabled] [ 1.141529] pci 0000:00:14.4: bridge window [mem 0xfe800000-0xfe8fffff] [ 1.141532] pci 0000:00:14.4: bridge window [mem pref disabled] [ 1.141537] pci 0000:00:15.0: PCI bridge to [bus 04-04] [ 1.141539] pci 0000:00:15.0: bridge window [io 0xc000-0xdfff] [ 1.141543] pci 0000:00:15.0: bridge window [mem disabled] [ 1.141546] pci 0000:00:15.0: bridge window [mem pref disabled] [ 1.141550] pci 0000:00:15.1: PCI bridge to [bus 05-05] [ 1.141553] pci 0000:00:15.1: bridge window [io 0xe000-0xefff] [ 1.141556] pci 0000:00:15.1: bridge window [mem 0xfe900000-0xfe9fffff] [ 1.141560] pci 0000:00:15.1: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref] [ 1.141572] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.141575] pci 0000:00:02.0: setting latency timer to 64 [ 1.141579] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.141581] pci 0000:00:0a.0: setting latency timer to 64 [ 1.141591] pci 0000:00:15.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.141594] pci 0000:00:15.0: setting latency timer to 64 [ 1.141599] pci 0000:00:15.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.141602] pci 0000:00:15.1: setting latency timer to 64 [ 1.141605] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 1.141606] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 1.141608] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 1.141609] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff] [ 1.141611] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xdfffffff] [ 1.141612] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff] [ 1.141614] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff] [ 1.141615] pci_bus 0000:01: resource 1 [mem 0xfe600000-0xfe6fffff] [ 1.141617] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 1.141619] pci_bus 0000:02: resource 1 [mem 0xfe700000-0xfe7fffff] [ 1.141621] pci_bus 0000:03: resource 1 [mem 0xfe800000-0xfe8fffff] [ 1.141622] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7] [ 1.141624] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff] [ 1.141625] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff] [ 1.141627] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff] [ 1.141628] pci_bus 0000:03: resource 8 [mem 0xd0000000-0xdfffffff] [ 1.141630] pci_bus 0000:03: resource 9 [mem 0xf0000000-0xfebfffff] [ 1.141631] pci_bus 0000:04: resource 0 [io 0xc000-0xdfff] [ 1.141633] pci_bus 0000:05: resource 0 [io 0xe000-0xefff] [ 1.141634] pci_bus 0000:05: resource 1 [mem 0xfe900000-0xfe9fffff] [ 1.141636] pci_bus 0000:05: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref] [ 1.141660] NET: Registered protocol family 2 [ 1.141762] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 1.142575] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 1.144636] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.144891] TCP: Hash tables configured (established 524288 bind 65536) [ 1.144892] TCP reno registered [ 1.144900] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 1.144924] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 1.145014] NET: Registered protocol family 1 [ 1.990129] pci 0000:01:00.0: Boot video device [ 1.990163] PCI: CLS 64 bytes, default 64 [ 1.991541] PCI-DMA: Disabling AGP. [ 1.991626] PCI-DMA: aperture base @ c4000000 size 65536 KB [ 1.991628] PCI-DMA: using GART IOMMU. [ 1.991630] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 1.994878] audit: initializing netlink socket (disabled) [ 1.994891] type=2000 audit(1303335108.990:1): initialized [ 2.003818] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 2.004997] VFS: Disk quotas dquot_6.5.2 [ 2.005031] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 2.005477] fuse init (API version 7.16) [ 2.005527] msgmni has been set to 7918 [ 2.005741] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 2.005771] io scheduler noop registered [ 2.005772] io scheduler deadline registered [ 2.005797] io scheduler cfq registered (default) [ 2.005912] pcieport 0000:00:02.0: setting latency timer to 64 [ 2.005937] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X [ 2.006029] pcieport 0000:00:0a.0: setting latency timer to 64 [ 2.006047] pcieport 0000:00:0a.0: irq 41 for MSI/MSI-X [ 2.006132] pcieport 0000:00:15.0: setting latency timer to 64 [ 2.006171] pcieport 0000:00:15.0: irq 42 for MSI/MSI-X [ 2.006264] pcieport 0000:00:15.1: setting latency timer to 64 [ 2.006302] pcieport 0000:00:15.1: irq 43 for MSI/MSI-X [ 2.006378] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt [ 2.006380] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 2.006381] pci 0000:01:00.1: Signaling PME through PCIe PME interrupt [ 2.006384] pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded [ 2.006392] pcieport 0000:00:0a.0: Signaling PME through PCIe PME interrupt [ 2.006394] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt [ 2.006396] pcie_pme 0000:00:0a.0:pcie01: service driver pcie_pme loaded [ 2.006409] pcieport 0000:00:15.0: Signaling PME through PCIe PME interrupt [ 2.006410] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt [ 2.006414] pcie_pme 0000:00:15.0:pcie01: service driver pcie_pme loaded [ 2.006427] pcieport 0000:00:15.1: Signaling PME through PCIe PME interrupt [ 2.006429] pci 0000:05:00.0: Signaling PME through PCIe PME interrupt [ 2.006432] pcie_pme 0000:00:15.1:pcie01: service driver pcie_pme loaded [ 2.006442] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 2.006457] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 2.006549] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 2.160087] ACPI: Power Button [PWRB] [ 2.160118] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 2.160120] ACPI: Power Button [PWRF] [ 2.160240] ACPI: acpi_idle registered with cpuidle [ 2.160264] ACPI: processor limited to max C-state 1 [ 2.240758] ERST: Table is not found! [ 2.240799] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 2.261360] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 2.870711] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 2.880277] Linux agpgart interface v0.103 [ 2.880948] brd: module loaded [ 2.881251] loop: module loaded [ 2.881306] i2c-core: driver [adp5520] using legacy suspend method [ 2.881308] i2c-core: driver [adp5520] using legacy resume method [ 2.881465] pata_acpi 0000:00:14.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 2.881486] pata_acpi 0000:00:14.1: setting latency timer to 64 [ 2.881545] pata_acpi 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.881559] pata_acpi 0000:04:00.0: setting latency timer to 64 [ 2.881568] pata_acpi 0000:04:00.0: PCI INT A disabled [ 2.881837] Fixed MDIO Bus: probed [ 2.881855] PPP generic driver version 2.4.2 [ 2.881878] tun: Universal TUN/TAP device driver, 1.6 [ 2.881879] tun: (C) 1999-2004 Max Krasnyansky [ 2.881926] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.881967] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 2.881987] ehci_hcd 0000:00:12.2: EHCI Host Controller [ 2.882034] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 2.940113] ehci_hcd 0000:00:12.2: QUIRK: Enable exception for AMD Hudson ASPM [ 2.940116] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 2.940135] ehci_hcd 0000:00:12.2: debug port 1 [ 2.940151] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe5ff800 [ 2.960098] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 2.960173] hub 1-0:1.0: USB hub found [ 2.960176] hub 1-0:1.0: 5 ports detected [ 2.960269] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 2.960277] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 2.960300] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 2.990094] Refined TSC clocksource calibration: 3199.975 MHz. [ 2.990096] Switching to clocksource tsc [ 2.990143] ehci_hcd 0000:00:13.2: QUIRK: Enable exception for AMD Hudson ASPM [ 2.990146] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 2.990162] ehci_hcd 0000:00:13.2: debug port 1 [ 2.990171] ehci_hcd 0000:00:13.2: irq 17, io mem 0xfe5ff400 [ 3.010077] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 3.010136] hub 2-0:1.0: USB hub found [ 3.010138] hub 2-0:1.0: 5 ports detected [ 3.010211] ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 3.010219] ehci_hcd 0000:00:16.2: EHCI Host Controller [ 3.010242] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3 [ 3.010264] ehci_hcd 0000:00:16.2: QUIRK: Enable exception for AMD Hudson ASPM [ 3.010267] ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 3.010282] ehci_hcd 0000:00:16.2: debug port 1 [ 3.010291] ehci_hcd 0000:00:16.2: irq 17, io mem 0xfe5ff000 [ 3.030075] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00 [ 3.030132] hub 3-0:1.0: USB hub found [ 3.030135] hub 3-0:1.0: 4 ports detected [ 3.030187] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.030216] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 3.030223] ohci_hcd 0000:00:12.0: OHCI Host Controller [ 3.030249] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4 [ 3.030281] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfe5fe000 [ 3.094148] hub 4-0:1.0: USB hub found [ 3.094153] hub 4-0:1.0: 5 ports detected [ 3.094269] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 3.094276] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 3.094299] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 3.094323] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe5fd000 [ 3.154145] hub 5-0:1.0: USB hub found [ 3.154150] hub 5-0:1.0: 5 ports detected [ 3.154268] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 3.154275] ohci_hcd 0000:00:14.5: OHCI Host Controller [ 3.154302] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6 [ 3.154326] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe5fc000 [ 3.214267] hub 6-0:1.0: USB hub found [ 3.214272] hub 6-0:1.0: 2 ports detected [ 3.214380] ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 3.214388] ohci_hcd 0000:00:16.0: OHCI Host Controller [ 3.214410] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7 [ 3.220152] ohci_hcd 0000:00:16.0: irq 18, io mem 0xfe5f7000 [ 3.280078] usb 1-2: new high speed USB device using ehci_hcd and address 2 [ 3.284158] hub 7-0:1.0: USB hub found [ 3.284163] hub 7-0:1.0: 4 ports detected [ 3.284227] uhci_hcd: USB Universal Host Controller Interface driver [ 3.330092] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 3.330093] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 3.330205] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 3.330270] mousedev: PS/2 mouse device common for all mice [ 3.330341] rtc_cmos 00:02: RTC can wake from S4 [ 3.347874] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 3.420103] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 3.420123] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 3.420185] device-mapper: uevent: version 1.0.3 [ 3.420230] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com [ 3.420289] device-mapper: multipath: version 1.2.0 loaded [ 3.420291] device-mapper: multipath round-robin: version 1.0.0 loaded [ 3.420366] cpuidle: using governor ladder [ 3.420367] cpuidle: using governor menu [ 3.420516] TCP cubic registered [ 3.420588] NET: Registered protocol family 10 [ 3.420910] NET: Registered protocol family 17 [ 3.420919] Registering the dns_resolver key type [ 3.420954] powernow-k8: Found 1 AMD Phenom(tm) II X4 955 Processor (4 cpu cores) (version 2.20.00) [ 3.420978] powernow-k8: 0 : pstate 0 (3200 MHz) [ 3.420980] powernow-k8: 1 : pstate 1 (2500 MHz) [ 3.420981] powernow-k8: 2 : pstate 2 (2100 MHz) [ 3.420982] powernow-k8: 3 : pstate 3 (800 MHz) [ 3.421259] PM: Hibernation image not present or could not be loaded. [ 3.421266] registered taskstats version 1 [ 3.421509] Magic number: 7:197:551 [ 3.421518] tty ttyS27: hash matches [ 3.421536] pci_link PNP0C0F:02: hash matches [ 3.421580] rtc_cmos 00:02: setting system clock to 2011-04-20 21:31:51 UTC (1303335111) [ 3.421582] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 3.421584] EDD information not available. [ 3.422749] Freeing unused kernel memory: 956k freed [ 3.422933] Write protecting the kernel read-only data: 10240k [ 3.423489] Freeing unused kernel memory: 184k freed [ 3.426977] Freeing unused kernel memory: 1444k freed [ 3.440100] <30>udev[114]: starting version 167 [ 3.467107] scsi0 : pata_atiixp [ 3.468812] scsi1 : pata_atiixp [ 3.469265] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14 [ 3.469268] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15 [ 3.471035] pata_jmicron 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3.471062] pata_jmicron 0000:04:00.0: setting latency timer to 64 [ 3.471466] scsi2 : pata_jmicron [ 3.472800] scsi3 : pata_jmicron [ 3.473083] ata3: PATA max UDMA/100 cmd 0xd800 ctl 0xd400 bmdma 0xc400 irq 16 [ 3.473085] ata4: PATA max UDMA/100 cmd 0xd000 ctl 0xc800 bmdma 0xc408 irq 16 [ 3.476878] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.476896] r8169 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 3.476935] r8169 0000:05:00.0: setting latency timer to 64 [ 3.476989] r8169 0000:05:00.0: irq 44 for MSI/MSI-X [ 3.477305] r8169 0000:05:00.0: eth0: RTL8168d/8111d at 0xffffc9000066e000, 40:61:86:f5:e3:71, XID 081000c0 IRQ 44 [ 3.650739] ata3.00: ATAPI: Memorex DVD+-RAM 525G v1, G.01, max UDMA/66 [ 3.690735] ata3.00: configured for UDMA/66 [ 3.693702] scsi 2:0:0:0: CD-ROM Memorex DVD+-RAM 525G v1 G.01 PQ: 0 ANSI: 5 [ 3.696637] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.696640] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 3.696726] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 3.696779] sr 2:0:0:0: Attached scsi generic sg0 type 5 [ 3.850086] usb 4-5: new low speed USB device using ohci_hcd and address 2 [ 3.852671] ahci 0000:00:11.0: version 3.0 [ 3.852689] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 3.852739] ahci 0000:00:11.0: irq 45 for MSI/MSI-X [ 3.852817] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 3.852819] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part [ 3.853274] scsi4 : ahci [ 3.853327] scsi5 : ahci [ 3.853374] scsi6 : ahci [ 3.853420] scsi7 : ahci [ 3.853496] ata5: SATA max UDMA/133 abar m1024@0xfe5ffc00 port 0xfe5ffd00 irq 45 [ 3.853499] ata6: SATA max UDMA/133 abar m1024@0xfe5ffc00 port 0xfe5ffd80 irq 45 [ 3.853501] ata7: SATA max UDMA/133 abar m1024@0xfe5ffc00 port 0xfe5ffe00 irq 45 [ 3.853504] ata8: SATA max UDMA/133 abar m1024@0xfe5ffc00 port 0xfe5ffe80 irq 45 [ 4.200112] ata8: SATA link down (SStatus 0 SControl 300) [ 4.210112] ata7: SATA link down (SStatus 0 SControl 300) [ 4.400099] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 4.407313] ata5.00: ATA-8: OCZ-AGILITY2, 1.32, max UDMA/133 [ 4.407316] ata5.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 4.410100] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 4.411232] ata6.00: ATA-8: ST3500418AS, CC38, max UDMA/133 [ 4.411233] ata6.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 4.412568] ata6.00: configured for UDMA/133 [ 4.417311] ata5.00: configured for UDMA/133 [ 4.417386] scsi 4:0:0:0: Direct-Access ATA OCZ-AGILITY2 1.32 PQ: 0 ANSI: 5 [ 4.417497] sd 4:0:0:0: Attached scsi generic sg1 type 0 [ 4.417519] sd 4:0:0:0: [sda] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB) [ 4.417590] scsi 5:0:0:0: Direct-Access ATA ST3500418AS CC38 PQ: 0 ANSI: 5 [ 4.417610] sd 4:0:0:0: [sda] Write Protect is off [ 4.417613] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.417639] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.417662] sd 5:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 4.417679] sd 5:0:0:0: Attached scsi generic sg2 type 0 [ 4.417699] sd 5:0:0:0: [sdb] Write Protect is off [ 4.417701] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 4.417713] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.418094] sda: sda1 sda2 [ 4.418292] sd 4:0:0:0: [sda] Attached SCSI disk [ 4.477491] sdb: sdb1 sdb2 sdb3 < sdb5 sdb6 > [ 4.477716] sd 5:0:0:0: [sdb] Attached SCSI disk [ 4.480019] usb 5-1: new low speed USB device using ohci_hcd and address 2 [ 4.480429] usbcore: registered new interface driver usbhid [ 4.480430] usbhid: USB HID core driver [ 4.500156] input: Logitech Logitech RumblePad 2 USB as /devices/pci0000:00/0000:00:12.0/usb4/4-5/4-5:1.0/input/input3 [ 4.500215] logitech 0003:046D:C218.0001: input,hidraw0: USB HID v1.10 Joystick [Logitech Logitech RumblePad 2 USB] on usb-0000:00:12.0-5/input0 [ 4.500223] logitech 0003:046D:C218.0001: Force feedback for Logitech RumblePad/Rumblepad 2 by Anssi Hannula [ 4.721300] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:13.0/usb5/5-1/5-1:1.0/input/input4 [ 4.721373] generic-usb 0003:045E:0040.0002: input,hidraw1: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:13.0-1/input0 [ 4.775162] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null) [ 6.503501] Adding 5859324k swap on /dev/sdb2. Priority:-1 extents:1 across:5859324k [ 7.712207] <30>udev[469]: starting version 167 [ 8.770371] type=1400 audit(1303360316.843:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=654 comm="apparmor_parser" [ 8.770383] type=1400 audit(1303360316.843:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=652 comm="apparmor_parser" [ 8.770616] type=1400 audit(1303360316.843:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=654 comm="apparmor_parser" [ 8.770632] type=1400 audit(1303360316.843:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=652 comm="apparmor_parser" [ 8.770775] type=1400 audit(1303360316.843:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=654 comm="apparmor_parser" [ 8.770795] type=1400 audit(1303360316.843:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=652 comm="apparmor_parser" [ 8.818906] EXT4-fs (sdb5): re-mounted. Opts: errors=remount-ro [ 9.162703] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [ 9.162706] Disabling lock debugging due to kernel taint [ 9.208918] [fglrx] Maximum main memory to use for locked dma buffers: 3799 MBytes. [ 9.208997] [fglrx] vendor: 1002 device: 68d8 count: 1 [ 9.209327] [fglrx] ioport: bar 4, base 0xb000, size: 0x100 [ 9.209337] pci 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 9.209341] pci 0000:01:00.0: setting latency timer to 64 [ 9.209628] [fglrx] Kernel PAT support is enabled [ 9.209642] [fglrx] module loaded - fglrx 8.84.60 [Mar 24 2011] with 1 minors [ 9.509724] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 9.626530] hda_codec: ALC892: BIOS auto-probing. [ 9.634508] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input5 [ 9.634674] HDA Intel 0000:01:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 9.634730] HDA Intel 0000:01:00.1: irq 46 for MSI/MSI-X [ 9.634749] HDA Intel 0000:01:00.1: setting latency timer to 64 [ 11.046052] type=1400 audit(1303360319.113:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=931 comm="apparmor_parser" [ 11.046307] type=1400 audit(1303360319.113:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=931 comm="apparmor_parser" [ 11.046469] type=1400 audit(1303360319.113:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=931 comm="apparmor_parser" [ 11.090505] type=1400 audit(1303360319.163:11): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=930 comm="apparmor_parser" [ 11.553028] lp: driver loaded but no devices found [ 11.553887] usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x7711 [ 11.553909] usbcore: registered new interface driver usblp [ 13.029456] vboxdrv: Found 4 processor cores. [ 13.029639] vboxdrv: fAsync=0 offMin=0x4fc offMax=0x6965 [ 13.029718] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 13.029720] vboxdrv: Successfully loaded version 4.0.4_OSE (interface 0x00160000). [ 13.379377] r8169 0000:05:00.0: eth0: link down [ 13.379727] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 13.732312] xhci_hcd 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 13.732337] xhci_hcd 0000:02:00.0: setting latency timer to 64 [ 13.732340] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 13.732393] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 8 [ 13.770221] xhci_hcd 0000:02:00.0: irq 18, io mem 0xfe7fe000 [ 13.770273] xhci_hcd 0000:02:00.0: irq 47 for MSI/MSI-X [ 13.770277] xhci_hcd 0000:02:00.0: irq 48 for MSI/MSI-X [ 13.770280] xhci_hcd 0000:02:00.0: irq 49 for MSI/MSI-X [ 13.770283] xhci_hcd 0000:02:00.0: irq 50 for MSI/MSI-X [ 13.770286] xhci_hcd 0000:02:00.0: irq 51 for MSI/MSI-X [ 13.773576] usb usb8: No SuperSpeed endpoint companion for config 1 interface 0 altsetting 0 ep 129: using minimum values [ 13.773655] xHCI xhci_add_endpoint called for root hub [ 13.773657] xHCI xhci_check_bandwidth called for root hub [ 13.773680] hub 8-0:1.0: USB hub found [ 13.773686] hub 8-0:1.0: 4 ports detected [ 13.793209] MCE: In-kernel MCE decoding enabled. [ 13.796426] EDAC MC: Ver: 2.1.0 Apr 11 2011 [ 13.796673] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 13.976816] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01 [ 13.976877] SP5100 TCO timer: mmio address 0xb8fe00 already in use [ 14.114984] EDAC amd64_edac: v3.3.0 [ 14.115042] EDAC amd64: DRAM ECC disabled. [ 14.115047] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 14.115048] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. [ 14.115049] (Note that use of the override may cause unknown side effects.) [ 14.229673] cfg80211: Calling CRDA to update world regulatory domain [ 14.487631] cfg80211: World regulatory domain updated: [ 14.487634] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 14.487636] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 14.487638] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 14.487640] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 14.487641] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 14.487643] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 14.538395] rt61pci 0000:03:06.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 14.546261] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 14.546263] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 14.546265] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 14.546267] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 14.546269] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 14.546271] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 14.546272] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 14.546274] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 14.546275] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 14.546277] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 14.546279] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 14.546281] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 14.546282] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 14.546284] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 14.546286] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 14.546287] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 14.546289] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 14.546291] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 14.546292] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 14.546294] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 14.546296] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 14.546298] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 14.546299] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule: [ 14.546301] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm) [ 14.546302] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule: [ 14.546304] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm) [ 14.546306] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule: [ 14.546308] cfg80211: 2474000 KHz - 2494000 KHz @ KHz), (300 mBi, 2000 mBm) [ 14.641847] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 14.642253] Registered led device: rt61pci-phy0::radio [ 14.642266] Registered led device: rt61pci-phy0::assoc [ 14.683029] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90012400000, using 5120k, total 5120k [ 14.683031] vesafb: mode is 1280x1024x32, linelength=5120, pages=0 [ 14.683033] vesafb: scrolling: redraw [ 14.683035] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 [ 14.683170] Console: switching to colour frame buffer device 160x64 [ 14.683190] fb0: VESA VGA frame buffer device [ 14.760450] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 14.774642] ppdev: user-space parallel port driver [ 14.795143] audit_printk_skb: 18 callbacks suppressed [ 14.795146] type=1400 audit(1303360322.863:18): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1357 comm="apparmor_parser" [ 14.795494] type=1400 audit(1303360322.863:19): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1357 comm="apparmor_parser" [ 16.521137] EXT4-fs (sdb5): re-mounted. Opts: errors=remount-ro,commit=0 [ 17.730227] wlan0: authenticate with 00:23:69:bb:3b:58 (try 1) [ 17.731837] wlan0: authenticated [ 17.731854] wlan0: associate with 00:23:69:bb:3b:58 (try 1) [ 17.734535] wlan0: RX AssocResp from 00:23:69:bb:3b:58 (capab=0x411 status=0 aid=1) [ 17.734537] wlan0: associated [ 17.735078] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 17.833398] Intel AES-NI instructions are not detected. [ 17.899212] padlock_aes: VIA PadLock not detected. [ 18.736663] usb 1-2: usbfs: interface 1 claimed by usblp while 'usb' sets config #1 [ 19.421486] fglrx_pci 0000:01:00.0: irq 52 for MSI/MSI-X [ 19.421946] [fglrx] Firegl kernel thread PID: 1520 [ 19.422004] [fglrx] Firegl kernel thread PID: 1521 [ 19.422041] [fglrx] Firegl kernel thread PID: 1522 [ 19.422277] [fglrx] IRQ 52 Enabled [ 19.598188] [fglrx] Gart USWC size:1240 M. [ 19.598190] [fglrx] Gart cacheable size:491 M. [ 19.598195] [fglrx] Reserved FB block: Shared offset:0, size:1000000 [ 19.598196] [fglrx] Reserved FB block: Unshared offset:f91f000, size:3e1000 [ 19.598198] [fglrx] Reserved FB block: Unshared offset:3fff4000, size:c000 [ 27.236775] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj. [ 28.730059] wlan0: no IPv6 routers present [ 43.023280] EXT4-fs (sdb5): re-mounted. Opts: errors=remount-ro,commit=0