[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.38-10-generic (buildd@roseapple) (gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-8ubuntu4) ) #44-Ubuntu SMP Thu Jun 2 21:32:54 UTC 2011 (Ubuntu 2.6.38-10.44-generic 2.6.38.7) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 0000000077ef0000 (usable) [ 0.000000] BIOS-e820: 0000000077ef0000 - 0000000077eff000 (ACPI data) [ 0.000000] BIOS-e820: 0000000077eff000 - 0000000077f00000 (ACPI NVS) [ 0.000000] BIOS-e820: 0000000077f00000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled in hardware: non-PAE kernel! [ 0.000000] NX (Execute Disable) protection: approximated by x86 segment limits [ 0.000000] DMI present. [ 0.000000] DMI: Hewlett-Packard Presario V2000 (EC181UA#ABL) /3093, BIOS F.27 08/30/2006 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0x77ef0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-D3FFF write-protect [ 0.000000] D4000-DBFFF uncachable [ 0.000000] DC000-DFFFF write-protect [ 0.000000] E0000-E3FFF write-back [ 0.000000] E4000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FF80000000 write-back [ 0.000000] 1 base 0078000000 mask FFF8000000 uncachable [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] found SMP MP-table at [c00f8130] f8130 [ 0.000000] initial memory mapped : 0 - 01c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000 [ 0.000000] RAMDISK: 3677e000 - 373b7000 [ 0.000000] ACPI: RSDP 000f8080 00014 (v00 HP ) [ 0.000000] ACPI: RSDT 77ef8bf0 00034 (v01 HP 3093 20040830 LTP 00000000) [ 0.000000] ACPI: FACP 77efee4b 00074 (v01 HP 3093 20040830 PTL 0000005F) [ 0.000000] ACPI: DSDT 77ef8c24 06227 (v01 HP 3091 20040830 MSFT 0100000E) [ 0.000000] ACPI: FACS 77efffc0 00040 [ 0.000000] ACPI: SSDT 77efeebf 000B5 (v01 PTLTD POWERNOW 20040830 LTP 00000001) [ 0.000000] ACPI: APIC 77efef74 00050 (v01 PTLTD ? 3093 20040830 LTP 00000000) [ 0.000000] ACPI: MCFG 77efefc4 0003C (v01 PTLTD MCFG 20040830 LTP 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 1030MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x00077ef0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x00077ef0 [ 0.000000] On node 0 totalpages: 491135 [ 0.000000] free_area_init_node: node 0, pgdat c1784140, node_mem_map f587e200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2062 pages used for memmap [ 0.000000] HighMem zone: 261860 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] SB4X0 revision 0x11 [ 0.000000] Ignoring ACPI timer override. [ 0.000000] If you got timer trouble try acpi_use_timer_override [ 0.000000] ACPI: PM-Timer IO Port: 0x8008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level) [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000 [ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:7ec00000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 13 pages/cpu @f5400000 s28800 r0 d24448 u4194304 [ 0.000000] pcpu-alloc: s28800 r0 d24448 u4194304 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 487297 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-10-generic root=UUID=2188cf61-9ec6-46c6-9cef-c14d41dd45a3 ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 9824640 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:00077ef0) [ 0.000000] Memory: 1916804k/1964992k available (5190k kernel code, 47736k reserved, 2539k data, 700k init, 1055688k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc178d000 - 0xc183c000 ( 700 kB) [ 0.000000] .data : 0xc1511881 - 0xc178c4c0 (2539 kB) [ 0.000000] .text : 0xc1000000 - 0xc1511881 (5190 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] NR_IRQS:2304 nr_irqs:256 16 [ 0.000000] CPU 0 irqstacks, hard=f4406000 soft=f4408000 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1595.398 MHz processor. [ 0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3190.79 BogoMIPS (lpj=6381592) [ 0.004012] pid_max: default: 32768 minimum: 301 [ 0.004053] Security Framework initialized [ 0.004093] AppArmor: AppArmor initialized [ 0.004097] Yama: becoming mindful. [ 0.004196] Mount-cache hash table entries: 512 [ 0.004393] Initializing cgroup subsys ns [ 0.004399] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup. [ 0.004405] Initializing cgroup subsys cpuacct [ 0.004413] Initializing cgroup subsys memory [ 0.004428] Initializing cgroup subsys devices [ 0.004434] Initializing cgroup subsys freezer [ 0.004438] Initializing cgroup subsys net_cls [ 0.004442] Initializing cgroup subsys blkio [ 0.004492] mce: CPU supports 5 MCE banks [ 0.005295] SMP alternatives: switching to UP code [ 0.017167] Freeing SMP alternatives: 20k freed [ 0.017187] ACPI: Core revision 20110112 [ 0.023723] ftrace: allocating 23649 entries in 47 pages [ 0.028108] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.032354] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 [ 0.072050] CPU0: AMD Turion(tm) 64 Mobile Technology ML-28 stepping 02 [ 0.076004] Performance Events: AMD PMU driver. [ 0.076004] ... version: 0 [ 0.076004] ... bit width: 48 [ 0.076004] ... generic registers: 4 [ 0.076004] ... value mask: 0000ffffffffffff [ 0.076004] ... max period: 00007fffffffffff [ 0.076004] ... fixed-purpose events: 0 [ 0.076004] ... event mask: 000000000000000f [ 0.076004] Brought up 1 CPUs [ 0.076004] Total of 1 processors activated (3190.79 BogoMIPS). [ 0.076004] devtmpfs: initialized [ 0.076004] print_constraints: dummy: [ 0.076004] Time: 16:49:35 Date: 07/09/11 [ 0.076004] NET: Registered protocol family 16 [ 0.076004] EISA bus registered [ 0.076004] node 0 link 0: io port [1000, fffff] [ 0.076004] TOM: 0000000080000000 aka 2048M [ 0.076004] node 0 link 0: mmio [a0000, bffff] [ 0.076004] node 0 link 0: mmio [f0000000, ffffffff] [ 0.076004] node 0 link 0: mmio [e0000000, efffffff] [ 0.076004] node 0 link 0: mmio [80000000, dfffffff] [ 0.076004] bus: [00, ff] on node 0 link 0 [ 0.076004] bus: 00 index 0 [io 0x0000-0xffff] [ 0.076004] bus: 00 index 1 [mem 0x000a0000-0x000bffff] [ 0.076004] bus: 00 index 2 [mem 0x80000000-0xffffffff] [ 0.076004] ACPI: bus type pci registered [ 0.076004] PCI: MMCONFIG for domain 0000 [bus 00-04] at [mem 0xe0000000-0xe04fffff] (base 0xe0000000) [ 0.076004] PCI: not using MMCONFIG [ 0.076004] PCI: PCI BIOS revision 2.10 entry at 0xfd8bc, last bus=5 [ 0.076004] PCI: Using configuration type 1 for base access [ 0.076981] bio: create slab at 0 [ 0.077996] ACPI: EC: Look up EC in DSDT [ 0.080320] ACPI: Interpreter enabled [ 0.080326] ACPI: (supports S0 S3 S4 S5) [ 0.080347] ACPI: Using IOAPIC for interrupt routing [ 0.080428] PCI: MMCONFIG for domain 0000 [bus 00-04] at [mem 0xe0000000-0xe04fffff] (base 0xe0000000) [ 0.080958] PCI: MMCONFIG at [mem 0xe0000000-0xe04fffff] reserved in ACPI motherboard resources [ 0.080962] PCI: Using MMCONFIG for extended config space [ 0.084750] ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62 [ 0.084864] ACPI: No dock devices found. [ 0.084867] HEST: Table not found. [ 0.084873] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.088342] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.089792] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.089797] pci_root PNP0A03:00: host bridge window [mem 0x000d4000-0x000d5fff] (ignored) [ 0.089801] pci_root PNP0A03:00: host bridge window [mem 0x000d6000-0x000d7fff] (ignored) [ 0.089805] pci_root PNP0A03:00: host bridge window [mem 0x000d8000-0x000d9fff] (ignored) [ 0.089809] pci_root PNP0A03:00: host bridge window [mem 0x000da000-0x000dbfff] (ignored) [ 0.089814] pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xffffffff] (ignored) [ 0.089818] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.089822] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.089835] pci 0000:00:00.0: [1002:5950] type 0 class 0x000600 [ 0.089873] pci 0000:00:01.0: [1002:5a3f] type 1 class 0x000604 [ 0.089952] pci 0000:00:13.0: [1002:4374] type 0 class 0x000c03 [ 0.089979] pci 0000:00:13.0: reg 10: [mem 0xc0000000-0xc0000fff] [ 0.090102] pci 0000:00:13.1: [1002:4375] type 0 class 0x000c03 [ 0.090128] pci 0000:00:13.1: reg 10: [mem 0xc0001000-0xc0001fff] [ 0.090257] pci 0000:00:13.2: [1002:4373] type 0 class 0x000c03 [ 0.090286] pci 0000:00:13.2: reg 10: [mem 0xc0002000-0xc0002fff] [ 0.090394] pci 0000:00:13.2: supports D1 D2 [ 0.090398] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.090404] pci 0000:00:13.2: PME# disabled [ 0.090445] pci 0000:00:14.0: [1002:4372] type 0 class 0x000c05 [ 0.090468] pci 0000:00:14.0: reg 10: [io 0x8400-0x840f] [ 0.090484] pci 0000:00:14.0: reg 14: [mem 0xc0003000-0xc00033ff] [ 0.090549] HPET not enabled in BIOS. You might try hpet=force boot option [ 0.090596] pci 0000:00:14.1: [1002:4376] type 0 class 0x000101 [ 0.090622] pci 0000:00:14.1: reg 10: [io 0x01f0-0x01f7] [ 0.090637] pci 0000:00:14.1: reg 14: [io 0x03f4-0x03f7] [ 0.090652] pci 0000:00:14.1: reg 18: [io 0x0170-0x0177] [ 0.090666] pci 0000:00:14.1: reg 1c: [io 0x0374-0x0377] [ 0.090682] pci 0000:00:14.1: reg 20: [io 0x8410-0x841f] [ 0.090755] pci 0000:00:14.3: [1002:4377] type 0 class 0x000601 [ 0.090871] pci 0000:00:14.4: [1002:4371] type 1 class 0x000604 [ 0.090937] pci 0000:00:14.5: [1002:4370] type 0 class 0x000401 [ 0.090963] pci 0000:00:14.5: reg 10: [mem 0xc0003400-0xc00034ff] [ 0.091084] pci 0000:00:14.6: [1002:4378] type 0 class 0x000703 [ 0.091109] pci 0000:00:14.6: reg 10: [mem 0xc0003800-0xc00038ff] [ 0.091226] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600 [ 0.091252] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600 [ 0.091276] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600 [ 0.091298] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600 [ 0.091330] PCI: peer root bus 00 res updated from pci conf [ 0.091361] pci 0000:01:05.0: [1002:5955] type 0 class 0x000300 [ 0.091372] pci 0000:01:05.0: reg 10: [mem 0xc8000000-0xcfffffff pref] [ 0.091379] pci 0000:01:05.0: reg 14: [io 0x9000-0x90ff] [ 0.091387] pci 0000:01:05.0: reg 18: [mem 0xc0100000-0xc010ffff] [ 0.091405] pci 0000:01:05.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.091416] pci 0000:01:05.0: supports D1 D2 [ 0.091435] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.091441] pci 0000:00:01.0: bridge window [io 0x9000-0x9fff] [ 0.091445] pci 0000:00:01.0: bridge window [mem 0xc0100000-0xc01fffff] [ 0.091451] pci 0000:00:01.0: bridge window [mem 0xc8000000-0xcfffffff 64bit pref] [ 0.091489] pci 0000:05:00.0: [10ec:8139] type 0 class 0x000200 [ 0.091519] pci 0000:05:00.0: reg 10: [io 0xa000-0xa0ff] [ 0.091538] pci 0000:05:00.0: reg 14: [mem 0xc0208000-0xc02080ff] [ 0.091645] pci 0000:05:00.0: supports D1 D2 [ 0.091648] pci 0000:05:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.091655] pci 0000:05:00.0: PME# disabled [ 0.091681] pci 0000:05:02.0: [14e4:4318] type 0 class 0x000280 [ 0.091705] pci 0000:05:02.0: reg 10: [mem 0xc0204000-0xc0205fff] [ 0.091842] pci 0000:05:09.0: [104c:8031] type 2 class 0x000607 [ 0.091873] pci 0000:05:09.0: reg 10: [mem 0x00000000-0x00000fff] [ 0.091908] pci 0000:05:09.0: supports D1 D2 [ 0.091911] pci 0000:05:09.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.091918] pci 0000:05:09.0: PME# disabled [ 0.091952] pci 0000:05:09.2: [104c:8032] type 0 class 0x000c00 [ 0.091984] pci 0000:05:09.2: reg 10: [mem 0xc0208800-0xc0208fff] [ 0.092013] pci 0000:05:09.2: reg 14: [mem 0xc0200000-0xc0203fff] [ 0.092124] pci 0000:05:09.2: supports D1 D2 [ 0.092127] pci 0000:05:09.2: PME# supported from D0 D1 D2 D3hot [ 0.092136] pci 0000:05:09.2: PME# disabled [ 0.092167] pci 0000:05:09.3: [104c:8033] type 0 class 0x000180 [ 0.092199] pci 0000:05:09.3: reg 10: [mem 0xc0206000-0xc0207fff] [ 0.092318] pci 0000:05:09.3: supports D1 D2 [ 0.092321] pci 0000:05:09.3: PME# supported from D0 D1 D2 D3hot [ 0.092329] pci 0000:05:09.3: PME# disabled [ 0.092362] pci 0000:05:09.4: [104c:8034] type 0 class 0x000805 [ 0.092393] pci 0000:05:09.4: reg 10: [mem 0xc0209400-0xc02094ff] [ 0.092411] pci 0000:05:09.4: reg 14: [mem 0xc0209000-0xc02090ff] [ 0.092430] pci 0000:05:09.4: reg 18: [mem 0xc0208400-0xc02084ff] [ 0.092521] pci 0000:05:09.4: supports D1 D2 [ 0.092524] pci 0000:05:09.4: PME# supported from D0 D1 D2 D3hot [ 0.092531] pci 0000:05:09.4: PME# disabled [ 0.092596] pci 0000:00:14.4: PCI bridge to [bus 05-05] (subtractive decode) [ 0.092607] pci 0000:00:14.4: bridge window [io 0xa000-0xafff] [ 0.092614] pci 0000:00:14.4: bridge window [mem 0xc0200000-0xc02fffff] [ 0.092621] pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.092625] pci 0000:00:14.4: bridge window [io 0x0000-0xffff] (subtractive decode) [ 0.092629] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.092633] pci 0000:00:14.4: bridge window [mem 0x80000000-0xffffffff] (subtractive decode) [ 0.092700] pci_bus 0000:06: [bus 06-09] partially hidden behind transparent bridge 0000:05 [bus 05-05] [ 0.092716] pci_bus 0000:00: on NUMA node 0 [ 0.092720] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.092815] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] [ 0.092886] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 0.092946] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.095450] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled. [ 0.095507] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled. [ 0.095563] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled. [ 0.095618] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled. [ 0.095672] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled. [ 0.095727] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled. [ 0.095782] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled. [ 0.095837] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled. [ 0.095977] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none [ 0.095984] vgaarb: loaded [ 0.096295] SCSI subsystem initialized [ 0.096375] libata version 3.00 loaded. [ 0.096456] usbcore: registered new interface driver usbfs [ 0.096473] usbcore: registered new interface driver hub [ 0.096506] usbcore: registered new device driver usb [ 0.096790] wmi: Mapper loaded [ 0.096793] PCI: Using ACPI for IRQ routing [ 0.096950] PCI: pci_cache_line_size set to 64 bytes [ 0.097051] reserve RAM buffer: 000000000009f800 - 000000000009ffff [ 0.097055] reserve RAM buffer: 0000000077ef0000 - 0000000077ffffff [ 0.097191] NetLabel: Initializing [ 0.097194] NetLabel: domain hash size = 128 [ 0.097196] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.097212] NetLabel: unlabeled traffic allowed by default [ 0.107228] AppArmor: AppArmor Filesystem Enabled [ 0.107273] pnp: PnP ACPI init [ 0.107301] ACPI: bus type pnp registered [ 0.108087] pnp 00:00: [bus 00-ff] [ 0.108092] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.108095] pnp 00:00: [mem 0x000c0000-0x000c1fff window] [ 0.108099] pnp 00:00: [mem 0x000c2000-0x000c3fff window] [ 0.108103] pnp 00:00: [mem 0x000c4000-0x000c5fff window] [ 0.108106] pnp 00:00: [mem 0x000c6000-0x000c7fff window] [ 0.108110] pnp 00:00: [mem 0x000c8000-0x000c9fff window] [ 0.108113] pnp 00:00: [mem 0x000ca000-0x000cbfff window] [ 0.108117] pnp 00:00: [mem 0x000cc000-0x000cdfff window] [ 0.108120] pnp 00:00: [mem 0x000ce000-0x000cffff window] [ 0.108124] pnp 00:00: [mem 0x000d0000-0x000d1fff window] [ 0.108127] pnp 00:00: [mem 0x000d2000-0x000d3fff window] [ 0.108131] pnp 00:00: [mem 0x000d4000-0x000d5fff window] [ 0.108134] pnp 00:00: [mem 0x000d6000-0x000d7fff window] [ 0.108138] pnp 00:00: [mem 0x000d8000-0x000d9fff window] [ 0.108142] pnp 00:00: [mem 0x000da000-0x000dbfff window] [ 0.108145] pnp 00:00: [mem 0x000dc000-0x000ddfff window] [ 0.108149] pnp 00:00: [mem 0x000de000-0x000dffff window] [ 0.108152] pnp 00:00: [mem 0x000e0000-0x000e1fff window] [ 0.108156] pnp 00:00: [mem 0x000e2000-0x000e3fff window] [ 0.108159] pnp 00:00: [mem 0x000e4000-0x000e5fff window] [ 0.108163] pnp 00:00: [mem 0x000e6000-0x000e7fff window] [ 0.108166] pnp 00:00: [mem 0x000e8000-0x000e9fff window] [ 0.108170] pnp 00:00: [mem 0x000ea000-0x000ebfff window] [ 0.108174] pnp 00:00: [mem 0x000ec000-0x000edfff window] [ 0.108177] pnp 00:00: [mem 0x000ee000-0x000effff window] [ 0.108181] pnp 00:00: [mem 0x80000000-0xffffffff window] [ 0.108185] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.108189] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.108192] pnp 00:00: [io 0x0d00-0xffff window] [ 0.108256] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.108315] pnp 00:01: [mem 0xe0000000-0xefffffff] [ 0.108319] pnp 00:01: [mem 0xfec00000-0xfec00fff] [ 0.108322] pnp 00:01: [mem 0xfee00000-0xfee00fff] [ 0.108395] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved [ 0.108400] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.108404] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.108409] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.108627] pnp 00:02: [io 0x0000-0x001f] [ 0.108630] pnp 00:02: [io 0x0080-0x008f] [ 0.108633] pnp 00:02: [io 0x00c0-0x00df] [ 0.108637] pnp 00:02: [dma 4] [ 0.108680] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.108692] pnp 00:03: [io 0x00f0-0x00fe] [ 0.108710] pnp 00:03: [irq 13] [ 0.108747] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.108761] pnp 00:04: [io 0x0070-0x0071] [ 0.108767] pnp 00:04: [irq 8] [ 0.108806] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.108817] pnp 00:05: [io 0x0061] [ 0.108853] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.108867] pnp 00:06: [io 0x0060] [ 0.108870] pnp 00:06: [io 0x0064] [ 0.108876] pnp 00:06: [irq 1] [ 0.108913] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.108929] pnp 00:07: [irq 12] [ 0.108974] pnp 00:07: Plug and Play ACPI device, IDs SYN011c SYN0100 SYN0002 PNP0f13 (active) [ 0.108994] pnp 00:08: [io 0x002e-0x002f] [ 0.108997] pnp 00:08: [io 0x0072-0x0073] [ 0.109000] pnp 00:08: [io 0x1080] [ 0.109003] pnp 00:08: [io 0x00b0-0x00b1] [ 0.109006] pnp 00:08: [io 0x0092] [ 0.109009] pnp 00:08: [io 0x0220-0x022f] [ 0.109012] pnp 00:08: [io 0x040b] [ 0.109015] pnp 00:08: [io 0x04d0-0x04d1] [ 0.109018] pnp 00:08: [io 0x04d6] [ 0.109021] pnp 00:08: [io 0x0530-0x0537] [ 0.109024] pnp 00:08: [io 0x0c00-0x0c01] [ 0.109027] pnp 00:08: [io 0x0c14] [ 0.109030] pnp 00:08: [io 0x0c50-0x0c52] [ 0.109033] pnp 00:08: [io 0x0c6c] [ 0.109036] pnp 00:08: [io 0x0c6f] [ 0.109038] pnp 00:08: [io 0x0cd4-0x0cd5] [ 0.109041] pnp 00:08: [io 0x0cd6-0x0cd7] [ 0.109048] pnp 00:08: [io 0x0cd8-0x0cdf] [ 0.109051] pnp 00:08: [io 0x8000-0x805f] [ 0.109055] pnp 00:08: [io 0x8100-0x81ff window] [ 0.109058] pnp 00:08: [io 0x8200-0x82ff window] [ 0.109061] pnp 00:08: [io 0x0f40-0x0f47] [ 0.109064] pnp 00:08: [io 0x087f] [ 0.109143] system 00:08: [io 0x1080] has been reserved [ 0.109147] system 00:08: [io 0x0220-0x022f] has been reserved [ 0.109151] system 00:08: [io 0x040b] has been reserved [ 0.109155] system 00:08: [io 0x04d0-0x04d1] has been reserved [ 0.109159] system 00:08: [io 0x04d6] has been reserved [ 0.109167] system 00:08: [io 0x0530-0x0537] has been reserved [ 0.109171] system 00:08: [io 0x0c00-0x0c01] has been reserved [ 0.109175] system 00:08: [io 0x0c14] has been reserved [ 0.109179] system 00:08: [io 0x0c50-0x0c52] has been reserved [ 0.109183] system 00:08: [io 0x0c6c] has been reserved [ 0.109187] system 00:08: [io 0x0c6f] has been reserved [ 0.109191] system 00:08: [io 0x0cd4-0x0cd5] has been reserved [ 0.109195] system 00:08: [io 0x0cd6-0x0cd7] has been reserved [ 0.109199] system 00:08: [io 0x0cd8-0x0cdf] has been reserved [ 0.109203] system 00:08: [io 0x8000-0x805f] has been reserved [ 0.109207] system 00:08: [io 0x8100-0x81ff window] has been reserved [ 0.109212] system 00:08: [io 0x8200-0x82ff window] has been reserved [ 0.109216] system 00:08: [io 0x0f40-0x0f47] has been reserved [ 0.109220] system 00:08: [io 0x087f] has been reserved [ 0.109225] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.109289] pnp 00:09: [mem 0x000e0000-0x000fffff] [ 0.109293] pnp 00:09: [mem 0xfff80000-0xffffffff] [ 0.109296] pnp 00:09: [mem 0x00000000-0x00000fff] [ 0.109315] pnp 00:09: disabling [mem 0x00000000-0x00000fff] because it overlaps 0000:01:05.0 BAR 6 [mem 0x00000000-0x0001ffff pref] [ 0.109363] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.109367] system 00:09: [mem 0xfff80000-0xffffffff] has been reserved [ 0.109372] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.109416] pnp: PnP ACPI: found 10 devices [ 0.109416] ACPI: ACPI bus type pnp unregistered [ 0.109416] PnPBIOS: Disabled by ACPI PNP [ 0.147135] Switching to clocksource acpi_pm [ 0.147184] pci 0000:00:14.4: BAR 15: assigned [mem 0x80000000-0x83ffffff pref] [ 0.147190] pci 0000:01:05.0: BAR 6: assigned [mem 0xc0120000-0xc013ffff pref] [ 0.147195] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.147199] pci 0000:00:01.0: bridge window [io 0x9000-0x9fff] [ 0.147204] pci 0000:00:01.0: bridge window [mem 0xc0100000-0xc01fffff] [ 0.147209] pci 0000:00:01.0: bridge window [mem 0xc8000000-0xcfffffff 64bit pref] [ 0.147218] pci 0000:05:09.0: BAR 15: assigned [mem 0x80000000-0x83ffffff pref] [ 0.147224] pci 0000:05:09.0: BAR 16: assigned [mem 0x84000000-0x87ffffff] [ 0.147229] pci 0000:05:09.0: BAR 0: assigned [mem 0xc020a000-0xc020afff] [ 0.147239] pci 0000:05:09.0: BAR 0: set to [mem 0xc020a000-0xc020afff] (PCI address [0xc020a000-0xc020afff]) [ 0.147244] pci 0000:05:09.0: BAR 13: assigned [io 0xa400-0xa4ff] [ 0.147248] pci 0000:05:09.0: BAR 14: assigned [io 0xa800-0xa8ff] [ 0.147252] pci 0000:05:09.0: CardBus bridge to [bus 06-09] [ 0.147256] pci 0000:05:09.0: bridge window [io 0xa400-0xa4ff] [ 0.147264] pci 0000:05:09.0: bridge window [io 0xa800-0xa8ff] [ 0.147272] pci 0000:05:09.0: bridge window [mem 0x80000000-0x83ffffff pref] [ 0.147279] pci 0000:05:09.0: bridge window [mem 0x84000000-0x87ffffff] [ 0.147287] pci 0000:00:14.4: PCI bridge to [bus 05-05] [ 0.147292] pci 0000:00:14.4: bridge window [io 0xa000-0xafff] [ 0.147301] pci 0000:00:14.4: bridge window [mem 0xc0200000-0xc02fffff] [ 0.147308] pci 0000:00:14.4: bridge window [mem 0x80000000-0x83ffffff pref] [ 0.147347] pci 0000:05:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.147355] pci 0000:05:09.0: setting latency timer to 64 [ 0.147361] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] [ 0.147365] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff] [ 0.147369] pci_bus 0000:00: resource 6 [mem 0x80000000-0xffffffff] [ 0.147372] pci_bus 0000:01: resource 0 [io 0x9000-0x9fff] [ 0.147376] pci_bus 0000:01: resource 1 [mem 0xc0100000-0xc01fffff] [ 0.147380] pci_bus 0000:01: resource 2 [mem 0xc8000000-0xcfffffff 64bit pref] [ 0.147384] pci_bus 0000:05: resource 0 [io 0xa000-0xafff] [ 0.147388] pci_bus 0000:05: resource 1 [mem 0xc0200000-0xc02fffff] [ 0.147392] pci_bus 0000:05: resource 2 [mem 0x80000000-0x83ffffff pref] [ 0.147396] pci_bus 0000:05: resource 4 [io 0x0000-0xffff] [ 0.147400] pci_bus 0000:05: resource 5 [mem 0x000a0000-0x000bffff] [ 0.147403] pci_bus 0000:05: resource 6 [mem 0x80000000-0xffffffff] [ 0.147407] pci_bus 0000:06: resource 0 [io 0xa400-0xa4ff] [ 0.147411] pci_bus 0000:06: resource 1 [io 0xa800-0xa8ff] [ 0.147415] pci_bus 0000:06: resource 2 [mem 0x80000000-0x83ffffff pref] [ 0.147419] pci_bus 0000:06: resource 3 [mem 0x84000000-0x87ffffff] [ 0.147468] NET: Registered protocol family 2 [ 0.147547] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.147907] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.147907] Switched to NOHz mode on CPU #0 [ 0.147907] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.147907] TCP: Hash tables configured (established 131072 bind 65536) [ 0.147907] TCP reno registered [ 0.147907] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.147907] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.147907] NET: Registered protocol family 1 [ 0.147907] pci 0000:00:00.0: MSI quirk detected; MSI disabled [ 0.147907] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled [ 0.812074] pci 0000:01:05.0: Boot video device [ 0.812101] PCI: CLS 32 bytes, default 64 [ 0.812397] cpufreq-nforce2: No nForce2 chipset. [ 0.812592] audit: initializing netlink socket (disabled) [ 0.812610] type=2000 audit(1310230175.812:1): initialized [ 0.826736] Trying to unpack rootfs image as initramfs... [ 0.848290] highmem bounce pool size: 64 pages [ 0.848299] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.856463] VFS: Disk quotas dquot_6.5.2 [ 0.856581] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.857512] fuse init (API version 7.16) [ 0.857634] msgmni has been set to 1681 [ 0.864529] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.864568] io scheduler noop registered [ 0.864571] io scheduler deadline registered [ 0.864593] io scheduler cfq registered (default) [ 0.864784] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.864823] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.867514] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 0.869471] ACPI: AC Adapter [ACAD] (on-line) [ 0.869633] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 0.869641] ACPI: Power Button [PWRB] [ 0.869783] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1 [ 0.869790] ACPI: Sleep Button [SLPB] [ 0.869848] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2 [ 0.873800] ACPI: Lid Switch [LID] [ 0.873909] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 0.873916] ACPI: Power Button [PWRF] [ 0.874037] ACPI: acpi_idle registered with cpuidle [ 0.874072] Marking TSC unstable due to TSC halts in idle [ 0.877632] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.877636] ACPI: Thermal Zone [THRM] (30 C) [ 0.877746] ERST: Table is not found! [ 0.877859] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.879323] serial 0000:00:14.6: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.879333] serial 0000:00:14.6: PCI INT B disabled [ 0.879508] Linux agpgart interface v0.103 [ 0.885952] brd: module loaded [ 0.886748] loop: module loaded [ 0.886911] i2c-core: driver [adp5520] using legacy suspend method [ 0.886914] i2c-core: driver [adp5520] using legacy resume method [ 0.887123] pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.887177] pata_acpi 0000:00:14.1: setting latency timer to 64 [ 0.887711] Fixed MDIO Bus: probed [ 0.887769] PPP generic driver version 2.4.2 [ 0.887821] tun: Universal TUN/TAP device driver, 1.6 [ 0.887824] tun: (C) 1999-2004 Max Krasnyansky [ 0.887940] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.887963] ehci_hcd 0000:00:13.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 0.887991] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 0.888252] isapnp: Scanning for PnP cards... [ 0.937531] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1 [ 0.937615] ehci_hcd 0000:00:13.2: irq 19, io mem 0xc0002000 [ 0.948452] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 0.948709] hub 1-0:1.0: USB hub found [ 0.948716] hub 1-0:1.0: 8 ports detected [ 0.948851] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.948878] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 0.948906] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 0.948960] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2 [ 0.948991] ohci_hcd 0000:00:13.0: irq 19, io mem 0xc0000000 [ 1.036619] hub 2-0:1.0: USB hub found [ 1.036631] hub 2-0:1.0: 4 ports detected [ 1.036748] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 1.036775] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 1.036840] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 [ 1.036872] ohci_hcd 0000:00:13.1: irq 19, io mem 0xc0001000 [ 1.100328] hub 3-0:1.0: USB hub found [ 1.100341] hub 3-0:1.0: 4 ports detected [ 1.100458] uhci_hcd: USB Universal Host Controller Interface driver [ 1.100583] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 [ 1.102906] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.102920] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.103101] mousedev: PS/2 mouse device common for all mice [ 1.106339] rtc_cmos 00:04: RTC can wake from S4 [ 1.106406] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 1.106442] rtc0: alarms up to one month, 114 bytes nvram [ 1.106575] device-mapper: uevent: version 1.0.3 [ 1.106686] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com [ 1.106783] device-mapper: multipath: version 1.2.0 loaded [ 1.106787] device-mapper: multipath round-robin: version 1.0.0 loaded [ 1.106898] EISA: Probing bus 0 at eisa.0 [ 1.106901] EISA: Cannot allocate resource for mainboard [ 1.106905] Cannot allocate resource for EISA slot 1 [ 1.106908] Cannot allocate resource for EISA slot 2 [ 1.106911] Cannot allocate resource for EISA slot 3 [ 1.106915] Cannot allocate resource for EISA slot 4 [ 1.106918] Cannot allocate resource for EISA slot 5 [ 1.106921] Cannot allocate resource for EISA slot 6 [ 1.106924] Cannot allocate resource for EISA slot 7 [ 1.106927] Cannot allocate resource for EISA slot 8 [ 1.106930] EISA: Detected 0 cards. [ 1.112158] cpuidle: using governor ladder [ 1.112220] cpuidle: using governor menu [ 1.112616] TCP cubic registered [ 1.112792] NET: Registered protocol family 10 [ 1.113584] NET: Registered protocol family 17 [ 1.113614] Registering the dns_resolver key type [ 1.113643] powernow-k8: Found 1 AMD Turion(tm) 64 Mobile Technology ML-28 (1 cpu cores) (version 2.20.00) [ 1.113825] powernow-k8: 0 : fid 0x8 (1600 MHz), vid 0x4 [ 1.113829] powernow-k8: 1 : fid 0x0 (800 MHz), vid 0x16 [ 1.113878] Using IPI No-Shortcut mode [ 1.114039] PM: Hibernation image not present or could not be loaded. [ 1.114060] registered taskstats version 1 [ 1.114332] Magic number: 3:167:843 [ 1.114448] rtc_cmos 00:04: setting system clock to 2011-07-09 16:49:36 UTC (1310230176) [ 1.114453] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.114455] EDD information not available. [ 1.118043] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 1.118058] ACPI: Battery Slot [BAT1] (battery present) [ 1.135528] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 1.508132] isapnp: No Plug & Play device found [ 1.508164] usb 3-1: new low speed USB device using ohci_hcd and address 2 [ 1.646433] Freeing initrd memory: 12516k freed [ 1.658203] Freeing unused kernel memory: 700k freed [ 1.658886] Write protecting the kernel text: 5192k [ 1.658934] Write protecting the kernel read-only data: 2148k [ 1.689158] <30>udev[61]: starting version 167 [ 1.936921] scsi0 : pata_atiixp [ 1.939454] scsi1 : pata_atiixp [ 1.954847] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8410 irq 14 [ 1.954853] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8418 irq 15 [ 1.974937] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 1.974966] 8139cp 0000:05:00.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too [ 1.985670] sdhci: Secure Digital Host Controller Interface driver [ 1.985675] sdhci: Copyright(c) Pierre Ossman [ 2.005384] b43-pci-bridge 0000:05:02.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 2.024082] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x0D, vendor 0x4243) [ 2.024094] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x09, vendor 0x4243) [ 2.024105] ssb: Core 2 found: PCI (cc 0x804, rev 0x0C, vendor 0x4243) [ 2.024115] ssb: Core 3 found: PCMCIA (cc 0x80D, rev 0x07, vendor 0x4243) [ 2.064154] ssb: Sonics Silicon Backplane found on PCI device 0000:05:02.0 [ 2.117183] ata2.00: ATAPI: HL-DT-ST DVD-RW GCA-4080N, 0C35, max MWDMA2 [ 2.117289] ata1.00: ATA-6: ST9100823A, 3.02, max UDMA/100 [ 2.117293] ata1.00: 195371568 sectors, multi 16: LBA48 [ 2.132545] ata2.00: configured for MWDMA2 [ 2.133135] ata1.00: configured for UDMA/100 [ 2.133284] scsi 0:0:0:0: Direct-Access ATA ST9100823A 3.02 PQ: 0 ANSI: 5 [ 2.133528] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.133638] sd 0:0:0:0: [sda] 195371568 512-byte logical blocks: (100 GB/93.1 GiB) [ 2.133704] sd 0:0:0:0: [sda] Write Protect is off [ 2.133708] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.133737] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.138492] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD-RW GCA-4080N 0C35 PQ: 0 ANSI: 5 [ 2.143812] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 2.143817] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.143964] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.144082] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 2.173091] sda: sda1 sda2 < sda5 > [ 2.173452] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.185555] sdhci-pci 0000:05:09.4: SDHCI controller found [104c:8034] (rev 0) [ 2.185577] sdhci-pci 0000:05:09.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 2.185638] mmc0: no vmmc regulator found [ 2.185681] Registered led device: mmc0:: [ 2.196101] mmc0: SDHCI controller on PCI [0000:05:09.4] using PIO [ 2.196155] mmc1: no vmmc regulator found [ 2.196259] Registered led device: mmc1:: [ 2.197820] mmc1: SDHCI controller on PCI [0000:05:09.4] using PIO [ 2.197851] mmc2: no vmmc regulator found [ 2.197920] Registered led device: mmc2:: [ 2.198004] mmc2: SDHCI controller on PCI [0000:05:09.4] using PIO [ 2.208080] 8139too: 8139too Fast Ethernet driver 0.9.28 [ 2.208156] 8139too 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 2.210231] 8139too 0000:05:00.0: eth0: RealTek RTL8139 at 0xa000, 00:c0:9f:ad:32:15, IRQ 18 [ 2.228945] firewire_ohci 0000:05:09.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 2.230532] input: Logitech Trackball as /devices/pci0000:00/0000:00:13.1/usb3/3-1/3-1:1.0/input/input5 [ 2.230807] generic-usb 0003:046D:C402.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech Trackball] on usb-0000:00:13.1-1/input0 [ 2.231073] usbcore: registered new interface driver usbhid [ 2.231077] usbhid: USB HID core driver [ 2.284169] firewire_ohci: Added fw-ohci device 0000:05:09.2, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2 [ 2.645659] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 2.784169] firewire_core: created device fw0: GUID 00c09f00005d70a4, S400 [ 20.667344] Adding 1963004k swap on /dev/sda5. Priority:-1 extents:1 across:1963004k [ 20.708165] <30>udev[274]: starting version 167 [ 20.771038] lp: driver loaded but no devices found [ 20.907370] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 21.149415] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x8400, revision 0 [ 21.252609] type=1400 audit(1310230196.635:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=457 comm="apparmor_parser" [ 21.253339] type=1400 audit(1310230196.635:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=457 comm="apparmor_parser" [ 21.253675] type=1400 audit(1310230196.635:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=457 comm="apparmor_parser" [ 21.512489] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 21.871937] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:0e/LNXVIDEO:00/input/input6 [ 21.922773] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 21.929870] eth0: link down [ 21.930317] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 22.239944] tifm_7xx1 0000:05:09.3: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 22.264271] yenta_cardbus 0000:05:09.0: CardBus bridge found [103c:3091] [ 22.264302] yenta_cardbus 0000:05:09.0: Enabling burst memory read transactions [ 22.264311] yenta_cardbus 0000:05:09.0: Using CSCINT to route CSC interrupts to PCI [ 22.264314] yenta_cardbus 0000:05:09.0: Routing CardBus interrupts to PCI [ 22.264323] yenta_cardbus 0000:05:09.0: TI: mfunc 0x01a01b22, devctl 0x64 [ 22.317875] type=1400 audit(1310230197.699:5): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=618 comm="apparmor_parser" [ 22.329211] type=1400 audit(1310230197.711:6): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=620 comm="apparmor_parser" [ 22.333447] type=1400 audit(1310230197.715:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=620 comm="apparmor_parser" [ 22.333795] type=1400 audit(1310230197.715:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=620 comm="apparmor_parser" [ 22.376244] type=1400 audit(1310230197.759:9): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=621 comm="apparmor_parser" [ 22.404818] type=1400 audit(1310230197.787:10): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=621 comm="apparmor_parser" [ 22.413843] type=1400 audit(1310230197.795:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=621 comm="apparmor_parser" [ 22.496879] yenta_cardbus 0000:05:09.0: ISA IRQ mask 0x0ce8, PCI irq 17 [ 22.496886] yenta_cardbus 0000:05:09.0: Socket status: 30000006 [ 22.496891] pci_bus 0000:05: Raising subordinate bus# of parent bus (#05) from #05 to #09 [ 22.496904] yenta_cardbus 0000:05:09.0: pcmcia: parent PCI bridge window: [io 0xa000-0xafff] [ 22.496909] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa000-0xafff: excluding 0xa000-0xa0ff [ 22.659929] cfg80211: Calling CRDA to update world regulatory domain [ 22.680533] 0xa400-0xa4ff 0xa800-0xa8ff [ 22.856555] Synaptics Touchpad, model: 1, fw: 5.10, id: 0x258eb1, caps: 0xa04713/0x0/0x0 [ 22.909179] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7 [ 23.170734] [ 23.170746] yenta_cardbus 0000:05:09.0: pcmcia: parent PCI bridge window: [mem 0xc0200000-0xc02fffff] [ 23.170752] pcmcia_socket pcmcia_socket0: cs: memory probe 0xc0200000-0xc02fffff: excluding 0xc0200000-0xc020ffff [ 23.170769] yenta_cardbus 0000:05:09.0: pcmcia: parent PCI bridge window: [mem 0x80000000-0x83ffffff pref] [ 23.170774] pcmcia_socket pcmcia_socket0: cs: memory probe 0x80000000-0x83ffffff: excluding 0x80000000-0x83ffffff [ 23.325622] input: HP WMI hotkeys as /devices/virtual/input/input8 [ 23.336426] cfg80211: World regulatory domain updated: [ 23.336432] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 23.336437] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 23.336441] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 23.336445] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 23.336449] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 23.336453] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 23.407578] ATI IXP MC97 controller 0000:00:14.6: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 23.500921] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x1f0-0x1f7 0x220-0x22f 0x370-0x377 [ 23.503449] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3f7 [ 23.516087] MC'97 0 converters and GPIO not ready (0x1) [ 23.579954] 0x408-0x40f 0x4d0-0x4d7 [ 23.580603] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: excluding 0x878-0x87f [ 23.581483] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: excluding 0xc00-0xc07 0xc10-0xc17 0xc50-0xc57 0xc68-0xc6f 0xcd0-0xcdf [ 23.582307] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xfffff [ 23.582373] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean. [ 23.582439] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff [ 23.582514] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. [ 23.669191] [drm] Initialized drm 1.1.0 20060810 [ 23.786348] b43-phy0: Broadcom 4318 WLAN found (core revision 9) [ 23.865133] ATI IXP AC97 controller 0000:00:14.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 23.888833] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 23.888839] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 23.888843] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 23.888848] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 23.888851] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 23.888855] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 23.888859] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 23.888863] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 23.888866] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 23.888870] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 23.888873] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 23.888877] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 23.888880] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 23.888884] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 23.888888] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 23.888892] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 23.888895] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 23.888899] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 23.888902] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 23.888906] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 23.888910] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 23.888914] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 23.888917] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule: [ 23.888921] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm) [ 23.888925] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule: [ 23.888929] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm) [ 23.888932] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule: [ 23.888936] cfg80211: 2474000 KHz - 2494000 KHz @ KHz), (300 mBi, 2000 mBm) [ 23.972065] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 23.974081] Registered led device: b43-phy0::radio [ 23.974148] Broadcom 43xx driver loaded [ Features: PNL, Firmware-ID: FW13 ] [ 24.368550] [drm] radeon defaulting to kernel modesetting. [ 24.368557] [drm] radeon kernel modesetting enabled. [ 24.368690] radeon 0000:01:05.0: power state changed by ACPI to D0 [ 24.368696] radeon 0000:01:05.0: power state changed by ACPI to D0 [ 24.368707] radeon 0000:01:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 24.376404] [drm] initializing kernel modesetting (RS480 0x1002:0x5955). [ 24.376443] [drm] register mmio base: 0xC0100000 [ 24.376446] [drm] register mmio size: 65536 [ 24.376621] [drm] Generation 2 PCI interface, using max accessible memory [ 24.376629] radeon 0000:01:05.0: VRAM: 128M 0x0000000078000000 - 0x000000007FFFFFFF (128M used) [ 24.376634] radeon 0000:01:05.0: GTT: 512M 0x0000000080000000 - 0x000000009FFFFFFF [ 24.376645] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 24.376648] [drm] Driver supports precise vblank timestamp query. [ 24.376659] [drm] radeon: irq initialized. [ 24.376775] [drm] Detected VRAM RAM=128M, BAR=128M [ 24.376781] [drm] RAM width 128bits DDR [ 24.380745] [TTM] Zone kernel: Available graphics memory: 437176 kiB. [ 24.380750] [TTM] Zone highmem: Available graphics memory: 965020 kiB. [ 24.380753] [TTM] Initializing pool allocator. [ 24.380780] [drm] radeon: 128M of VRAM memory ready [ 24.380784] [drm] radeon: 512M of GTT memory ready. [ 24.380814] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 24.388837] [drm] radeon: 2 quad pipes, 1 z pipes initialized. [ 24.404077] radeon 0000:01:05.0: WB enabled [ 24.404867] [drm] Loading R300 Microcode [ 24.413517] [drm] radeon: ring at 0x0000000080001000 [ 24.413540] [drm] ring test succeeded in 1 usecs [ 24.413695] [drm] radeon: ib pool ready. [ 24.417797] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10) [ 24.420959] [drm] ib test succeeded in 0 usecs [ 24.438151] [drm] Panel ID String: SEC [ 24.438156] [drm] Panel Size 1280x768 [ 24.441753] [drm] Radeon Display Connectors [ 24.441757] [drm] Connector 0: [ 24.441760] [drm] VGA [ 24.441764] [drm] DDC: 0x68 0x68 0x68 0x68 0x68 0x68 0x68 0x68 [ 24.441767] [drm] Encoders: [ 24.441769] [drm] CRT1: INTERNAL_DAC2 [ 24.441771] [drm] Connector 1: [ 24.441773] [drm] LVDS [ 24.441777] [drm] DDC: 0x198 0x198 0x19c 0x19c 0x1a0 0x1a0 0x1a4 0x1a4 [ 24.441779] [drm] Encoders: [ 24.441781] [drm] LCD1: INTERNAL_LVDS [ 24.441783] [drm] Connector 2: [ 24.441785] [drm] S-video [ 24.441787] [drm] Encoders: [ 24.441789] [drm] TV1: INTERNAL_DAC2 [ 24.496831] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 24.658580] [drm] radeon: power management initialized [ 24.872081] [drm] fb mappable at 0xC8040000 [ 24.872086] [drm] vram apper at 0xC8000000 [ 24.872089] [drm] size 3932160 [ 24.872091] [drm] fb depth is 24 [ 24.872093] [drm] pitch is 5120 [ 24.872380] fbcon: radeondrmfb (fb0) is primary device [ 24.877689] Console: switching to colour frame buffer device 160x48 [ 24.877738] fb0: radeondrmfb frame buffer device [ 24.877741] drm: registered panic notifier [ 24.877753] [drm] Initialized radeon 2.8.0 20080528 for 0000:01:05.0 on minor 0 [ 25.087528] ppdev: user-space parallel port driver [ 41.282842] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0 [ 49.748663] wlan0: authenticate with 00:1c:f0:c2:46:67 (try 1) [ 49.750091] wlan0: authenticated [ 49.750587] wlan0: associate with 00:1c:f0:c2:46:67 (try 1) [ 49.753468] wlan0: RX AssocResp from 00:1c:f0:c2:46:67 (capab=0x431 status=0 aid=2) [ 49.753474] wlan0: associated [ 49.754552] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 49.836078] Intel AES-NI instructions are not detected. [ 49.839761] padlock_aes: VIA PadLock not detected. [ 60.176050] wlan0: no IPv6 routers present