richard@linbox:/var/log$ tail -2 /proc/asound/oss/sndstat
0: SigmaTel STAC9708,11
1: Analog Devices AD1981A

richard@linbox:/var/log$ amixer
Simple mixer control 'Master',0
  Capabilities: pvolume pswitch pswitch-joined
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 31
  Mono:
  Front Left: Playback 12 [39%] [-28.50dB] [on]
  Front Right: Playback 12 [39%] [-28.50dB] [on]
Simple mixer control 'Master Mono',0
  Capabilities: pvolume pvolume-joined pswitch pswitch-joined
  Playback channels: Mono
  Limits: Playback 0 - 31
  Mono: Playback 0 [0%] [-46.50dB] [off]
Simple mixer control '3D Control - Switch',0
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [off]
Simple mixer control '3D Control Sigmatel - Depth',0
  Capabilities: volume volume-joined
  Playback channels: Mono
  Capture channels: Mono
  Limits: 0 - 3
  Mono: 0 [0%]
Simple mixer control '3D Control Sigmatel - Rear Depth',0
  Capabilities: volume volume-joined
  Playback channels: Mono
  Capture channels: Mono
  Limits: 0 - 3
  Mono: 0 [0%]
Simple mixer control 'PCM',0
  Capabilities: pvolume pswitch pswitch-joined
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 31
  Mono:
  Front Left: Playback 20 [65%] [-4.50dB] [on]
  Front Right: Playback 20 [65%] [-4.50dB] [on]
Simple mixer control 'Surround',0
  Capabilities: pvolume pswitch
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 31
  Mono:
  Front Left: Playback 0 [0%] [-46.50dB] [off]
  Front Right: Playback 0 [0%] [-46.50dB] [off]
Simple mixer control 'Line',0
  Capabilities: pvolume pswitch pswitch-joined cswitch cswitch-exclusive
  Capture exclusive group: 0
  Playback channels: Front Left - Front Right
  Capture channels: Front Left - Front Right
  Limits: Playback 0 - 31
  Front Left: Playback 0 [0%] [-34.50dB] [off] Capture [off]
  Front Right: Playback 0 [0%] [-34.50dB] [off] Capture [off]
Simple mixer control 'CD',0
  Capabilities: pvolume pswitch pswitch-joined cswitch cswitch-exclusive
  Capture exclusive group: 0
  Playback channels: Front Left - Front Right
  Capture channels: Front Left - Front Right
  Limits: Playback 0 - 31
  Front Left: Playback 27 [87%] [6.00dB] [on] Capture [off]
  Front Right: Playback 27 [87%] [6.00dB] [on] Capture [off]
Simple mixer control 'Mic',0
  Capabilities: pvolume pvolume-joined pswitch pswitch-joined cswitch cswitch-exclusive
  Capture exclusive group: 0
  Playback channels: Mono
  Capture channels: Front Left - Front Right
  Limits: Playback 0 - 31
  Mono: Playback 0 [0%] [-34.50dB] [off]
  Front Left: Capture [on]
  Front Right: Capture [on]
Simple mixer control 'Mic Boost (+20dB)',0
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [off]
Simple mixer control 'Mic Select',0
  Capabilities: enum
  Items: 'Mic1' 'Mic2'
  Item0: 'Mic1'
Simple mixer control 'Video',0
  Capabilities: pvolume pswitch pswitch-joined cswitch cswitch-exclusive
  Capture exclusive group: 0
  Playback channels: Front Left - Front Right
  Capture channels: Front Left - Front Right
  Limits: Playback 0 - 31
  Front Left: Playback 0 [0%] [-34.50dB] [off] Capture [off]
  Front Right: Playback 0 [0%] [-34.50dB] [off] Capture [off]
Simple mixer control 'Phone',0
  Capabilities: pvolume pvolume-joined pswitch pswitch-joined cswitch cswitch-exclusive
  Capture exclusive group: 0
  Playback channels: Mono
  Capture channels: Front Left - Front Right
  Limits: Playback 0 - 31
  Mono: Playback 0 [0%] [-34.50dB] [off]
  Front Left: Capture [off]
  Front Right: Capture [off]
Simple mixer control 'PC Speaker',0
  Capabilities: pvolume pvolume-joined pswitch pswitch-joined
  Playback channels: Mono
  Limits: Playback 0 - 15
  Mono: Playback 0 [0%] [-45.00dB] [off]
Simple mixer control 'Aux',0
  Capabilities: pvolume pswitch pswitch-joined cswitch cswitch-exclusive
  Capture exclusive group: 0
  Playback channels: Front Left - Front Right
  Capture channels: Front Left - Front Right
  Limits: Playback 0 - 31
  Front Left: Playback 0 [0%] [-34.50dB] [off] Capture [off]
  Front Right: Playback 0 [0%] [-34.50dB] [off] Capture [off]
Simple mixer control 'Mono Output Select',0
  Capabilities: enum
  Items: 'Mix' 'Mic'
  Item0: 'Mix'
Simple mixer control 'Capture',0
  Capabilities: cvolume cswitch cswitch-joined
  Capture channels: Front Left - Front Right
  Limits: Capture 0 - 15
  Front Left: Capture 0 [0%] [0.00dB] [on]
  Front Right: Capture 0 [0%] [0.00dB] [on]
Simple mixer control 'Mix',0
  Capabilities: cswitch cswitch-exclusive
  Capture exclusive group: 0
  Capture channels: Front Left - Front Right
  Front Left: Capture [off]
  Front Right: Capture [off]
Simple mixer control 'Mix Mono',0
  Capabilities: cswitch cswitch-exclusive
  Capture exclusive group: 0
  Capture channels: Front Left - Front Right
  Front Left: Capture [off]
  Front Right: Capture [off]
Simple mixer control 'Analog/Digital Output Jack',0
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [off]
Simple mixer control 'External Amplifier',0
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [on]
Simple mixer control 'Sigmatel 4-Speaker Stereo',0
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [off]
Simple mixer control 'Sigmatel Output Bias',0
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [off]
Simple mixer control 'Sigmatel Surround',0
  Capabilities: pvolume pswitch pswitch-joined
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 31
  Mono:
  Front Left: Playback 0 [0%] [-46.50dB] [off]
  Front Right: Playback 0 [0%] [-46.50dB] [off]
Simple mixer control 'Sigmatel Surround Phase Inversion Playback ',0
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [off]

richard@linbox:/var/log$ lspci -nv
00:00.0 0600: 8086:2560 (rev 01)
        Subsystem: 1028:0142
        Flags: bus master, fast devsel, latency 0
        Memory at e0000000 (32-bit, prefetchable) [size=128M]
        Capabilities: <access denied>

00:01.0 0604: 8086:2561 (rev 01) (prog-if 00 [Normal decode])
        Flags: bus master, 66MHz, fast devsel, latency 64
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
        I/O behind bridge: 0000e000-0000efff
        Memory behind bridge: ff800000-ff9fffff
        Prefetchable memory behind bridge: e8000000-f7ffffff

00:1d.0 0c03: 8086:24c2 (rev 01) (prog-if 00 [UHCI])
        Subsystem: 1028:0142
        Flags: bus master, medium devsel, latency 0, IRQ 17
        I/O ports at ff80 [size=32]

00:1d.1 0c03: 8086:24c4 (rev 01) (prog-if 00 [UHCI])
        Subsystem: 1028:0142
        Flags: bus master, medium devsel, latency 0, IRQ 18
        I/O ports at ff60 [size=32]

00:1d.2 0c03: 8086:24c7 (rev 01) (prog-if 00 [UHCI])
        Subsystem: 1028:0142
        Flags: bus master, medium devsel, latency 0, IRQ 19
        I/O ports at ff40 [size=32]

00:1d.7 0c03: 8086:24cd (rev 01) (prog-if 20 [EHCI])
        Subsystem: 1028:0142
        Flags: bus master, medium devsel, latency 0, IRQ 20
        Memory at ffa10800 (32-bit, non-prefetchable) [size=1K]
        Capabilities: <access denied>

00:1e.0 0604: 8086:244e (rev 81) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
        I/O behind bridge: 0000d000-0000dfff
        Memory behind bridge: ff600000-ff7fffff

00:1f.0 0601: 8086:24c0 (rev 01)
        Flags: bus master, medium devsel, latency 0

00:1f.1 0101: 8086:24cb (rev 01) (prog-if 8a [Master SecP PriP])
        Subsystem: 1028:0142
        Flags: bus master, medium devsel, latency 0, IRQ 19
        I/O ports at 01f0 [size=8]
        I/O ports at 03f4 [size=1]
        I/O ports at 0170 [size=8]
        I/O ports at 0374 [size=1]
        I/O ports at ffa0 [size=16]
        Memory at 50000000 (32-bit, non-prefetchable) [size=1K]

00:1f.3 0c05: 8086:24c3 (rev 01)
        Subsystem: 1028:0142
        Flags: medium devsel, IRQ 11
        I/O ports at cc80 [size=32]

00:1f.5 0401: 8086:24c5 (rev 01)
        Subsystem: 1028:0142
        Flags: bus master, medium devsel, latency 0, IRQ 22
        I/O ports at c800 [size=256]
        I/O ports at cc40 [size=64]
        Memory at ffa10400 (32-bit, non-prefetchable) [size=512]
        Memory at ffa10000 (32-bit, non-prefetchable) [size=256]
        Capabilities: <access denied>

01:00.0 0300: 1002:5960 (rev 01) (prog-if 00 [VGA])
        Subsystem: 148c:2094
        Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 17
        Memory at f0000000 (32-bit, prefetchable) [size=128M]
        I/O ports at ec00 [size=256]
        Memory at ff8f0000 (32-bit, non-prefetchable) [size=64K]
        Expansion ROM at ff800000 [disabled] [size=128K]
        Capabilities: <access denied>

01:00.1 0380: 1002:5940 (rev 01)
        Subsystem: 148c:2095
        Flags: bus master, 66MHz, medium devsel, latency 64
        Memory at e8000000 (32-bit, prefetchable) [size=128M]
        Memory at ff8e0000 (32-bit, non-prefetchable) [size=64K]
        Capabilities: <access denied>

02:01.0 0703: 14e4:4212 (rev 02) (prog-if 00 [Generic])
        Subsystem: 1028:0001
        Flags: bus master, fast devsel, latency 64, IRQ 16
        Memory at ff6ff000 (32-bit, non-prefetchable) [size=4K]
        I/O ports at dcf0 [size=16]
        Capabilities: <access denied>

02:02.0 0401: 1102:0006
        Subsystem: 1102:1003
        Flags: bus master, medium devsel, latency 64, IRQ 19
        I/O ports at dcc0 [size=32]
        Capabilities: <access denied>

02:02.1 0980: 1102:7004
        Subsystem: 1102:1003
        Flags: bus master, medium devsel, latency 64
        I/O ports at dce8 [size=8]
        Capabilities: <access denied>

02:08.0 0200: 8086:1039 (rev 81)
        Subsystem: 1028:0142
        Flags: bus master, medium devsel, latency 64, IRQ 21
        Memory at ff6fe000 (32-bit, non-prefetchable) [size=4K]
        I/O ports at dc80 [size=64]
        Capabilities: <access denied>

richard@linbox:/var/log$ asoundconf list
Names of available sound cards:
Live
I82801DBICH4
richard@linbox:/var/log$

richard@linbox:/var/log$ cat /etc/asound.conf ~/.asoundrc*
cat: /etc/asound.conf: No such file or directory
# ALSA library configuration file

# Include settings that are under the control of asoundconf(1).
# (To disable these settings, comment out this line.)
</home/richard/.asoundrc.asoundconf>

# ALSA library configuration file managed by asoundconf(1).
#
# MANUAL CHANGES TO THIS FILE WILL BE OVERWRITTEN!
#
# Manual changes to the ALSA library configuration should be implemented
# by editing the ~/.asoundrc file, not by editing this file.
!defaults.pcm.card Live
defaults.ctl.card Live
defaults.pcm.device 0
defaults.pcm.subdevice -1
defaults.pcm.nonblock 1
defaults.pcm.ipc_key 5678293
defaults.pcm.ipc_gid audio
defaults.pcm.ipc_perm 0660
defaults.pcm.dmix_max_periods 0
defaults.rawmidi.card 0
defaults.rawmidi.device 0
defaults.rawmidi.subdevice -1
defaults.hwdep.card 0
defaults.hwdep.device 0
defaults.timer.class 2
defaults.timer.sclass 0
defaults.timer.card 0
defaults.timer.device 0
defaults.timer.subdevice 0


richard@linbox:/var/log$ dmesg
[    0.000000] Linux version 2.6.20-12-generic (root@vernadsky) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sun Mar 18 03:07:14 UTC 2007 (Ubuntu 2.6.20-12.19-generic)
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] sanitize start
[    0.000000] sanitize end
[    0.000000] copy_e820_map() start: 0000000000000000 size: 00000000000a0000 end: 00000000000a0000 type: 1
[    0.000000] copy_e820_map() type is E820_RAM
[    0.000000] copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: 0000000000100000 type: 2
[    0.000000] copy_e820_map() start: 0000000000100000 size: 000000003fe75000 end: 000000003ff75000 type: 1
[    0.000000] copy_e820_map() type is E820_RAM
[    0.000000] copy_e820_map() start: 000000003ff75000 size: 0000000000002000 end: 000000003ff77000 type: 4
[    0.000000] copy_e820_map() start: 000000003ff77000 size: 0000000000021000 end: 000000003ff98000 type: 3
[    0.000000] copy_e820_map() start: 000000003ff98000 size: 0000000000068000 end: 0000000040000000 type: 2
[    0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000000010000 end: 00000000fec10000 type: 2
[    0.000000] copy_e820_map() start: 00000000fee00000 size: 0000000000010000 end: 00000000fee10000 type: 2
[    0.000000] copy_e820_map() start: 00000000ffb00000 size: 0000000000500000 end: 0000000100000000 type: 2
[    0.000000]  BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000003ff75000 (usable)
[    0.000000]  BIOS-e820: 000000003ff75000 - 000000003ff77000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000003ff77000 - 000000003ff98000 (ACPI data)
[    0.000000]  BIOS-e820: 000000003ff98000 - 0000000040000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[    0.000000] 127MB HIGHMEM available.
[    0.000000] 896MB LOWMEM available.
[    0.000000] found SMP MP-table at 000fe710
[    0.000000] Entering add_active_range(0, 0, 262005) 0 entries of 256 used
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->   229376
[    0.000000]   HighMem    229376 ->   262005
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->   262005
[    0.000000] On node 0 totalpages: 262005
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 1760 pages used for memmap
[    0.000000]   Normal zone: 223520 pages, LIFO batch:31
[    0.000000]   HighMem zone: 254 pages used for memmap
[    0.000000]   HighMem zone: 32375 pages, LIFO batch:7
[    0.000000] DMI 2.3 present.
[    0.000000] ACPI: RSDP (v000 DELL                                  ) @ 0x000feb90
[    0.000000] ACPI: RSDT (v001 DELL    4550    0x00000007 ASL  0x00000061) @ 0x000fd4f6
[    0.000000] ACPI: FADT (v001 DELL    4550    0x00000007 ASL  0x00000061) @ 0x000fd52e
[    0.000000] ACPI: SSDT (v001   DELL    st_ex 0x00001000 MSFT 0x0100000d) @ 0xfffd0a4d
[    0.000000] ACPI: MADT (v001 DELL    4550    0x00000007 ASL  0x00000061) @ 0x000fd5a2
[    0.000000] ACPI: BOOT (v001 DELL    4550    0x00000007 ASL  0x00000061) @ 0x000fd60e
[    0.000000] ACPI: ASF! (v016 DELL    4550    0x00000007 ASL  0x00000061) @ 0x000fd636
[    0.000000] ACPI: DSDT (v001   DELL    dt_ex 0x00001000 MSFT 0x0100000d) @ 0x00000000
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] Processor #0 15:2 APIC version 20
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled)
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
[    0.000000] Detected 1993.596 MHz processor.
[   12.335739] Built 1 zonelists.  Total pages: 259959
[   12.335746] Kernel command line: root=UUID=b1bf2df9-dc6c-4e44-ac36-bc5654f60124 ro quiet splash
[   12.335960] mapped APIC to ffffd000 (fee00000)
[   12.335963] mapped IOAPIC to ffffc000 (fec00000)
[   12.335968] Enabling fast FPU save and restore... done.
[   12.335972] Enabling unmasked SIMD FPU exception support... done.
[   12.335991] Initializing CPU#0
[   12.336107] PID hash table entries: 4096 (order: 12, 16384 bytes)
[   12.337462] Console: colour VGA+ 80x25
[   12.338451] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[   12.339442] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[   12.378161] Memory: 1027968k/1048020k available (1990k kernel code, 19384k reserved, 890k data, 328k init, 130516k highmem)
[   12.378176] virtual kernel memory layout:
[   12.378178]     fixmap  : 0xfff4e000 - 0xfffff000   ( 708 kB)
[   12.378179]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[   12.378181]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
[   12.378182]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
[   12.378184]       .init : 0xc03d7000 - 0xc0429000   ( 328 kB)
[   12.378185]       .data : 0xc02f1b24 - 0xc03d06d4   ( 890 kB)
[   12.378187]       .text : 0xc0100000 - 0xc02f1b24   (1990 kB)
[   12.378191] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[   12.455966] Calibrating delay using timer specific routine.. 3990.96 BogoMIPS (lpj=7981926)
[   12.456038] Security Framework v1.0.0 initialized
[   12.456056] SELinux:  Disabled at boot.
[   12.456080] Mount-cache hash table entries: 512
[   12.456348] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00000400 00000000 00000000
[   12.456366] CPU: Trace cache: 12K uops, L1 D cache: 8K
[   12.456370] CPU: L2 cache: 512K
[   12.456374] CPU: Hyper-Threading is disabled
[   12.456377] CPU: After all inits, caps: bfebfbff 00000000 00000000 00003080 00000400 00000000 00000000
[   12.456397] Compat vDSO mapped to ffffe000.
[   12.456405] Remapping vsyscall page to ffffe000
[   12.456425] Checking 'hlt' instruction... OK.
[   12.472152] SMP alternatives: switching to UP code
[   12.472558] Freeing SMP alternatives: 11k freed
[   12.472849] Early unpacking initramfs... done
[   12.857319] ACPI: Core revision 20060707
[   12.863555] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[   12.887694] CPU0: Intel(R) Pentium(R) 4 CPU 2.00GHz stepping 07
[   12.887750] Total of 1 processors activated (3990.96 BogoMIPS).
[   12.887898] ENABLING IO-APIC IRQs
[   12.888107] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[   13.035311] Brought up 1 CPUs
[   13.035642] Booting paravirtualized kernel on bare hardware
[   13.035733] Time:  3:15:34  Date: 02/20/107
[   13.035773] NET: Registered protocol family 16
[   13.035900] EISA bus registered
[   13.035907] ACPI: bus type pci registered
[   13.062607] PCI: PCI BIOS revision 2.10 entry at 0xfbe6d, last bus=2
[   13.062610] PCI: Using configuration type 1
[   13.062612] Setting up standard PCI resources
[   13.092141] ACPI: Interpreter enabled
[   13.092146] ACPI: Using IOAPIC for interrupt routing
[   13.097228] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   13.097240] PCI: Probing PCI hardware (bus 00)
[   13.097266] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
[   13.097765] * The chipset may have PM-Timer Bug. Due to workarounds for a bug,
[   13.097767] * this clock source is slow. If you are sure your timer does not have
[   13.097769] * this bug, please use "acpi_pm_good" to disable the workaround
[   13.097823] PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
[   13.097828] PCI quirk: region 0880-08bf claimed by ICH4 GPIO
[   13.098116] Boot video device is 0000:01:00.0
[   13.098489] PCI: Firmware left 0000:02:08.0 e100 interrupts enabled, disabling
[   13.098572] PCI: Transparent bridge - 0000:00:1e.0
[   13.098606] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   13.144569] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[   13.164925] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
[   13.165747] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 15)
[   13.166572] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 15)
[   13.167406] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 15)
[   13.168239] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 15)
[   13.169077] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
[   13.169898] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11 12 15)
[   13.170715] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 9 10 11 12 15)
[   13.170908] Linux Plug and Play Support v0.97 (c) Adam Belay
[   13.170923] pnp: PnP ACPI init
[   13.202209] pnp: PnP ACPI: found 12 devices
[   13.202217] PnPBIOS: Disabled by ACPI PNP
[   13.202290] PCI: Using ACPI for IRQ routing
[   13.202295] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   13.212858] NET: Registered protocol family 8
[   13.212862] NET: Registered protocol family 20
[   13.220320] pnp: 00:0b: ioport range 0x800-0x85f could not be reserved
[   13.220324] pnp: 00:0b: ioport range 0xc00-0xc7f has been reserved
[   13.220328] pnp: 00:0b: ioport range 0x860-0x8ff could not be reserved
[   13.220743] PCI: Bridge: 0000:00:01.0
[   13.220748]   IO window: e000-efff
[   13.220756]   MEM window: ff800000-ff9fffff
[   13.220762]   PREFETCH window: e8000000-f7ffffff
[   13.220769] PCI: Bridge: 0000:00:1e.0
[   13.220773]   IO window: d000-dfff
[   13.220780]   MEM window: ff600000-ff7fffff
[   13.220785]   PREFETCH window: disabled.
[   13.220807] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[   13.220844] NET: Registered protocol family 2
[   13.259102] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[   13.259397] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[   13.260689] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[   13.261573] TCP: Hash tables configured (established 131072 bind 65536)
[   13.261580] TCP reno registered
[   13.271216] checking if image is initramfs... it is
[   14.028075] Freeing initrd memory: 6699k freed
[   14.028380] Simple Boot Flag value 0x87 read from CMOS RAM was invalid
[   14.028384] Simple Boot Flag at 0x7a set to 0x1
[   14.028710] audit: initializing netlink socket (disabled)
[   14.028731] audit(1174360534.776:1): initialized
[   14.028855] highmem bounce pool size: 64 pages
[   14.028935] VFS: Disk quotas dquot_6.5.1
[   14.028965] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   14.029042] io scheduler noop registered
[   14.029046] io scheduler anticipatory registered
[   14.029050] io scheduler deadline registered
[   14.029063] io scheduler cfq registered (default)
[   14.029455] isapnp: Scanning for PnP cards...
[   14.383259] isapnp: No Plug & Play device found
[   14.417396] Real Time Clock Driver v1.12ac
[   14.417462] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   14.417657] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   14.418670] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   14.418939] ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 22 (level, low) -> IRQ 16
[   14.419571] mice: PS/2 mouse device common for all mice
[   14.420378] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   14.420722] input: Macintosh mouse button emulation as /class/input/input0
[   14.420771] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[   14.420776] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[   14.421074] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[   14.424827] serio: i8042 KBD port at 0x60,0x64 irq 1
[   14.424837] serio: i8042 AUX port at 0x60,0x64 irq 12
[   14.425065] EISA: Probing bus 0 at eisa.0
[   14.425111] EISA: Detected 0 cards.
[   14.455209] TCP cubic registered
[   14.455220] NET: Registered protocol family 1
[   14.455250] Using IPI No-Shortcut mode
[   14.455344] ACPI: (supports S0 S1 S3 S4 S5)
[   14.455406]   Magic number: 15:517:260
[   14.455462]   hash matches device ttyx2
[   14.456119] Freeing unused kernel memory: 328k freed
[   14.457505] Time: tsc clocksource has been installed.
[   14.470366] input: AT Translated Set 2 keyboard as /class/input/input1
[   15.755117] Capability LSM initialized
[   15.921780] ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
[   16.660155] usbcore: registered new interface driver usbfs
[   16.660193] usbcore: registered new interface driver hub
[   16.660226] usbcore: registered new device driver usb
[   16.661437] USB Universal Host Controller Interface driver v3.0
[   16.661508] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 17
[   16.661524] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[   16.661530] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[   16.661712] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[   16.661743] uhci_hcd 0000:00:1d.0: irq 17, io base 0x0000ff80
[   16.661904] usb usb1: configuration #1 chosen from 1 choice
[   16.661940] hub 1-0:1.0: USB hub found
[   16.661951] hub 1-0:1.0: 2 ports detected
[   16.762935] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 18
[   16.762952] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[   16.762957] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[   16.762988] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[   16.763020] uhci_hcd 0000:00:1d.1: irq 18, io base 0x0000ff60
[   16.763148] usb usb2: configuration #1 chosen from 1 choice
[   16.763186] hub 2-0:1.0: USB hub found
[   16.763198] hub 2-0:1.0: 2 ports detected
[   16.797164] e100: Intel(R) PRO/100 Network Driver, 3.5.17-k2-NAPI
[   16.797169] e100: Copyright(c) 1999-2006 Intel Corporation
[   16.866855] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 19
[   16.866871] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[   16.866877] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[   16.866910] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[   16.866942] uhci_hcd 0000:00:1d.2: irq 19, io base 0x0000ff40
[   16.867070] usb usb3: configuration #1 chosen from 1 choice
[   16.867106] hub 3-0:1.0: USB hub found
[   16.867117] hub 3-0:1.0: 2 ports detected
[   16.906189] Floppy drive(s): fd0 is 1.44M
[   16.944911] FDC 0 is a post-1991 82077
[   16.971013] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 20
[   16.971035] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[   16.971040] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[   16.971080] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
[   16.971127] ehci_hcd 0000:00:1d.7: debug port 1
[   16.971135] PCI: cache line size of 128 is not supported by device 0000:00:1d.7
[   16.971149] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xffa10800
[   16.975037] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   16.975145] usb usb4: configuration #1 chosen from 1 choice
[   16.975179] hub 4-0:1.0: USB hub found
[   16.975191] hub 4-0:1.0: 6 ports detected
[   17.086742] SCSI subsystem initialized
[   17.093754] libata version 2.20 loaded.
[   17.098583] ata_piix 0000:00:1f.1: version 2.10ac1
[   17.098603] PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
[   17.098612] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 19
[   17.098636] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[   17.098705] ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001ffa0 irq 14
[   17.098751] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001ffa8 irq 15
[   17.098777] scsi0 : ata_piix
[   17.486092] ata1.00: ATA-6: ST3120023A, 3.33, max UDMA/100
[   17.486098] ata1.00: 234441648 sectors, multi 8: LBA
[   17.494084] ata1.01: ATA-7: Hitachi HDT725032VLAT80, V54OA42A, max UDMA/133
[   17.494090] ata1.01: 625142448 sectors, multi 8: LBA48
[   17.502065] ata1.00: configured for UDMA/33
[   17.510055] ata1.01: configured for UDMA/100
[   17.510071] scsi1 : ata_piix
[   17.829671] ata2.00: ATAPI, max UDMA/33
[   17.993468] ata2.01: ATAPI, max UDMA/33
[   18.157273] ata2.00: configured for UDMA/33
[   18.321072] ata2.01: configured for UDMA/33
[   18.321239] scsi 0:0:0:0: Direct-Access     ATA      ST3120023A       3.33 PQ: 0 ANSI: 5
[   18.321727] scsi 0:0:1:0: Direct-Access     ATA      Hitachi HDT72503 V54O PQ: 0 ANSI: 5
[   18.325743] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-4163B A102 PQ: 0 ANSI: 5
[   18.326280] scsi 1:0:1:0: CD-ROM            HL-DT-ST CD-RW GCE-8400B  B104 PQ: 0 ANSI: 5
[   18.326752] ACPI: PCI Interrupt 0000:02:08.0[A] -> GSI 20 (level, low) -> IRQ 21
[   18.350148] e100: eth0: e100_probe: addr 0xff6fe000, irq 21, MAC addr 00:07:E9:D6:B5:E0
[   18.376443] SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
[   18.376483] sda: Write Protect is off
[   18.376487] sda: Mode Sense: 00 3a 00 00
[   18.376511] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   18.376594] SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
[   18.376608] sda: Write Protect is off
[   18.376611] sda: Mode Sense: 00 3a 00 00
[   18.376634] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   18.376638]  sda: sda1 sda2 < sda5 > sda3 sda4
[   18.402287] sd 0:0:0:0: Attached scsi disk sda
[   18.403168] SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB)
[   18.403187] sdb: Write Protect is off
[   18.403190] sdb: Mode Sense: 00 3a 00 00
[   18.403214] SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   18.403275] SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB)
[   18.403290] sdb: Write Protect is off
[   18.403292] sdb: Mode Sense: 00 3a 00 00
[   18.403315] SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   18.403320]  sdb: sdb1
[   18.413618] sd 0:0:1:0: Attached scsi disk sdb
[   18.419085] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   18.419119] sd 0:0:1:0: Attached scsi generic sg1 type 0
[   18.419144] scsi 1:0:0:0: Attached scsi generic sg2 type 5
[   18.419167] scsi 1:0:1:0: Attached scsi generic sg3 type 5
[   18.474834] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[   18.474843] Uniform CD-ROM driver Revision: 3.20
[   18.475132] sr 1:0:0:0: Attached scsi CD-ROM sr0
[   18.477852] sr1: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[   18.478060] sr 1:0:1:0: Attached scsi CD-ROM sr1
[   18.779146] Attempting manual resume
[   18.779151] swsusp: Resume From Partition 8:5
[   18.779154] PM: Checking swsusp image.
[   18.779505] PM: Resume from disk failed.
[   18.805445] kjournald starting.  Commit interval 5 seconds
[   18.805461] EXT3-fs: mounted filesystem with ordered data mode.
[   27.361985] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
[   28.500557] NET: Registered protocol family 10
[   28.500694] lo: Disabled Privacy Extensions
[   29.545293] Linux agpgart interface v0.101 (c) Dave Jones
[   29.548419] agpgart: Detected an Intel 845G Chipset.
[   29.556015] agpgart: AGP aperture is 128M @ 0xe0000000
[   29.571826] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   29.623166] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   30.311637] iTCO_vendor_support: vendor-support=0
[   30.377224] gameport: EMU10K1 is pci0000:02:02.1/gameport0, io 0xdce8, speed 1011kHz
[   30.557092] logips2pp: Detected unknown logitech mouse model 101
[   30.574496] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)
[   30.761890] ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 18 (level, low) -> IRQ 19
[   30.761926] Model 1003 Rev 00000000 Serial 10031102
[   31.018722] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 22
[   31.018758] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[   31.035694] input: ImExPS/2 Logitech Explorer Mouse as /class/input/input2
[   31.037891] parport: PnPBIOS parport detected.
[   31.037947] parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]
[   31.039059] iTCO_wdt: Found a ICH4 TCO device (Version=1, TCOBASE=0x0860)
[   31.039110] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   31.050947] input: PC Speaker as /class/input/input3
[   31.071289] intel_rng: Firmware space is locked read-only. If you can't or
[   31.071292] intel_rng: don't want to disable this in firmware setup, and if
[   31.071294] intel_rng: you are certain that your system has a functional
[   31.071296] intel_rng: RNG, try using the 'no_fwh_detect' option.
[   31.333049] intel8x0_measure_ac97_clock: measured 54087 usecs
[   31.333056] intel8x0: clocking to 48000
[   31.687898] lp0: using parport0 (interrupt-driven).
[   31.753098] Adding 746980k swap on /dev/disk/by-uuid/c95dce39-8c71-4f47-86bc-74df05ad07b6.  Priority:-1 extents:1 across:746980k
[   31.881258] EXT3 FS on sda3, internal journal
[   39.287382] eth0: no IPv6 routers present
[  201.356300] kjournald starting.  Commit interval 5 seconds
[  201.356539] EXT3 FS on sda1, internal journal
[  201.356546] EXT3-fs: mounted filesystem with ordered data mode.
[  201.401630] kjournald starting.  Commit interval 5 seconds
[  201.401966] EXT3 FS on sda4, internal journal
[  201.401973] EXT3-fs: mounted filesystem with ordered data mode.
[  201.407631] kjournald starting.  Commit interval 5 seconds
[  201.407986] EXT3 FS on sdb1, internal journal
[  201.407992] EXT3-fs: mounted filesystem with ordered data mode.
[  205.106053] input: Power Button (FF) as /class/input/input4
[  205.106344] ACPI: Power Button (FF) [PWRF]
[  205.134032] input: Power Button (CM) as /class/input/input5
[  205.134338] ACPI: Power Button (CM) [VBTN]
[  205.178108] Using specific hotkey driver
[  205.293869] No dock devices found.
[  205.391675] ibm_acpi: ec object not found
[  205.562635] pcc_acpi: loading...
[  212.655048] NET: Registered protocol family 17
[  213.241457] ppdev: user-space parallel port driver
[  213.489555] [drm] Initialized drm 1.1.0 20060810
[  213.517496] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 17
[  213.518743] [drm] Initialized radeon 1.25.0 20060524 on minor 0
[  216.530942] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[  216.531136] agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
[  216.531329] agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
[  216.894837] [drm] Setting GART location based on new memory map
[  216.894852] [drm] Loading R200 Microcode
[  216.894908] [drm] writeback test succeeded in 1 usecs
[  222.960306] eth0: no IPv6 routers present
[  225.062186] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[  225.062194] apm: overridden by ACPI.
[  225.663359] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[  225.807207] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[  225.808038] NFSD: starting 90-second grace period
[  228.075916] Bluetooth: Core ver 2.11
[  228.075999] NET: Registered protocol family 31
[  228.076002] Bluetooth: HCI device and connection manager initialized
[  228.076007] Bluetooth: HCI socket layer initialized
[  228.161326] Bluetooth: L2CAP ver 2.8
[  228.161333] Bluetooth: L2CAP socket layer initialized
[  228.302932] Bluetooth: RFCOMM socket layer initialized
[  228.302954] Bluetooth: RFCOMM TTY layer initialized
[  228.302957] Bluetooth: RFCOMM ver 1.8
richard@linbox:/var/log$


richard@linbox:/var/log$ cat /proc/interrupts
           CPU0
  0:     769244   IO-APIC-edge      timer
  1:       3240   IO-APIC-edge      i8042
  6:          5   IO-APIC-edge      floppy
  7:          0   IO-APIC-edge      parport0
  8:          3   IO-APIC-edge      rtc
  9:          1   IO-APIC-fasteoi   acpi
 12:     298607   IO-APIC-edge      i8042
 14:     133069   IO-APIC-edge      libata
 15:      47173   IO-APIC-edge      libata
 17:     172397   IO-APIC-fasteoi   uhci_hcd:usb1, radeon@pci:0000:01:00.0
 18:          0   IO-APIC-fasteoi   uhci_hcd:usb2
 19:      35258   IO-APIC-fasteoi   uhci_hcd:usb3, EMU10K1X
 20:          0   IO-APIC-fasteoi   ehci_hcd:usb4
 21:       4808   IO-APIC-fasteoi   eth0
 22:      16816   IO-APIC-fasteoi   Intel 82801DB-ICH4
NMI:          0
LOC:     769081
ERR:          0
MIS:          0