altos 1.6-1 source package in Ubuntu


altos (1.6-1) unstable; urgency=medium

  [ Keith Packard ]
  * altoslib: Stop re-loading previous flight when starting telemetry monitoring
  * telegps: Was mis-configuring the 'Configure Device' dialog
  * altos: Fix ability to disable telemetry by setting interval to 0
  * altos/test: Add TMv2 test program to .gitignore
  * altos: Add smaller altitude table file to .gitignore
  * altos: Make sure we don't beep out continuity twice in idle mode
  * altosui: Ignore built .desktop file
  * ao-bringup: Use C version of test-flash for telegps
  * ao-tools: Add ao-test-gps program
  * ao-bringup: Use C version of ao-test-gps in test-telegps
  * ao-tools/ao-test-gps: Improve output formatting
  * ao-tools/ao-test-igniter: Remove bogus printf
  * ao-bringup: Improve igniter testing. Add TeleMega and TeleMetrum testing.
  * Mark master branch as past the 1.5 point
  * altosdroid: Update version code and name for 1.5
  * altosdroid: Automatically sign the released version if the key is available
  * altosui: Fix --replay to run in realtime after boost
  * altosui: Bring up main window when doing --replay or --graph
  * altosdroid: Update notebook to reflect current status
  * altos: Make sure we drop the SPI mutex when aborting cc1120 recv
  * ao-bringup: Auto-select programmer for teledongle turnon
  * altos: Handle antenna down in ao_flight_test
  * altosui: Check for map and stats table when changing units/fonts in graph
  * altos: Record 32-bits for gyro calibration values
  * altoslib: Deal with new Mega log format that has 32-bit gyro cal
  * altosui: Update 'Imperial Units' checkbox when units change
  * altoslib: Compute tilt angle from eeprom data
  * altos: Fix syntax error with ao_log_mega change.
  * altos: Copy cc1120 driver to cc1200 driver and hack a bit
  * altos: Add prototype TeleDongle v1.9 code
  * altoslib: synchronize access to serial debug output list
  * altosuilib: Try to detect the architecture when loading JNI lib
  * ao-tools/ao-send-telem: Add verbose, fake and rate options
  * altos: Mark STM ao_spi_send as taking const pointer
  * altos: Expose telemetry altitude macros even without GPS
  * altos: Complete cc1200 driver
  * altos/teledongle-v1.9: Add remaining code to complete the project
  * altos: Sort out ao_gps_print altitude fetching
  * altos: Increase PQT value for cc1200 improving sensitivity
  * altos: Build TeleDongle v1.9 by default
  * altos: Remove old AO_SEND_ALL_BARO bits
  * altos: Perform cc1200 calibration less often. Tweak radio params
  * altos: Fix up telemetry delay computations
  * altos: Increase CC1200 SPI data rate to 8MHz
  * altosui: Pop up 'Connecting' dialog during Monitor Idle
  * altos: Rename microwater to microsplash
  * Move teledongle 1.9 to 1.8; there's a new 1.9
  * altos: Declare port register type only in arch header
  * altos: Stop attempting to ramp power on CC115L
  * altos: Use AO_SPO_SPEED_FAST for CC1200
  * altosuilib: GPS errors are recorded in floating point, not integers
  * altos: Use other TeleDongle LED for CRC-invalid packet reporting
  * altos/lpc: Declare SPI send parameters as const
  * altos/lpc: Disable JTAG when using pins for GPIO
  * altos/teledongle-v1.9: Switch to NXP processor as on prototype boards
  * altos: Reset interrupt flags before TX in CC1200 driver
  * altoslib: Missing headers for mag sensor in CSV output
  * altoslib: Make AltosState serializable
  * altosdroid: Don't display MISSING flight number
  * altoslib: Add getBytes/putBytes interface to AltosPreferencesBackend
  * altosdroid: TabMap needs to expose () constructor
  * altoslib: add AltosPreferences state save/restore interfaces
  * altosdroid: Save AltosState and restore at startup
  * altosdroid: East and West were flipped in all GPS output
  * Add AltosDroid release note for version 1.5
  * altos/microsplash: fix .gitignore to ignore resulting binary
  * altosui: Remove duplicate
  * altos: Allow TeleMega to be built without MPU6000
  * altos/teledongle-v1.8: Make this the same as teledongle v1.9
  * altos/cc1200: Wait for packet to be placed in FIFO during receive
  * altos/cc1200: Open up preamble detect to improve sensitivity
  * altos/cc1200: With PQT wide open, we can't use PQT_REACHED for start
  * altoslib: Add usbtrng, usbrelay and mpusb USB ids
  * micropeak: Support ĀµPUSB with our own USB ids
  * ao-bringup: Clear pending output before setting frequency.
  * altos: Document cc115l power measured at RF setting 0x03 as -31.75dBm
  * altos: Adjust CC1200 RSSI reporting value
  * altos/lpc: Switch LPC SPI driver to interrupt-driven
  * Set version to
  * altos: Get rid of some accidental debug code
  * altos/lpc: Fix double-buffered USB changes
  * altos: Add support for TeleBT v3.0
  * altos: Initial STMF04x support
  * altos: USBtrng v2.0 hardware bringup
  * altos: Add self-flash support for STM32F042 processor
  * altos: Add flash-loader to usbtrng-v2.0
  * ao-tools: Add --wait option to ao-usbload
  * altos/stmf0: Fix linker scripts to make ao_boot work
  * altos/stmf0: Add faster USB path
  * altos/stmf0: Add ADC and DMA APIs
  * altos/usbtrng-v2.0: Add random output command
  * altos/stm: Fix typo in stm32l.h
  * ao-tools: Add ao-usbtrng to dump RNG data for testing
  * altos/stmf0: Remove remaining stm32l bits from stm32f0 code
  * altos/stmf0: Add CRC driver
  * altos/usbtrng-v2.0: Use stmf042 hardware CRC unit
  * altos/stmf0: Re-implement fast ADC code for stmf0
  * Oops, forgot the TeleBT-v3.0 Makefile
  * And, also add the TeleBT v3.0 flash loader Makefile
  * altos/stm: Add ability to delay STDIO usage for serial ports
  * altos/btm: Add fancier debug. Pull serial reset port low.
  * altos: Always include a check for stdio overflow
  * altos/telebt-v3.0: Fix stdio setup for BTM
  * altos/telebt-v3.0: Turn red LED off after initialization
  * altos/stmf0: Support PA11/PA12 remapping
  * altos/usbtrng-v2.0: Select PA11/PA12 mapping config value
  * altos/telebt-v3.0: Add monitor bits
  * altos/telebt-v3.0: Set initial radio cal to a sensible value
  * altos: Rename teledongle-v1.9 as teledongle-v3.0
  * ao-bringup: Add turnon_teledonglev3
  * Revert "altos/lpc: Fix double-buffered USB changes"
  * Revert LPC usb performance improvements
  * altos/teledongle-v3.0: Shrink stacks to 320 bytes to fit in ram
  * altos/easymini-v1.0: Shrink stack to deal with USB changes
  * altos/lpc: Clean up USB endpoint access functions
  * altos/lpc: Double buffer USB data transfers
  * Update docs for 1.6
  * libaltos: Use more SetupDi API to get Windows 7 listing devices
  * Add 'keithp-fat' target for uploading temporary builds to keithp's machine
  * windows: Look for current Java version in \SOFTWARE\Wow6432Node
  * micropeak: Fix file association registry install on Windows
  * micropeak: Support both FTDI and Altus Metrum USB IDs
  * micropeak: Install Windows AltusMetrum driver bits
  * altosuilib: New teledongle and telebt devices are not pair-programmed
  * Package TeleDongle-v3.0 firmware with TeleGPS and AltosUI apps
  * altoslib: Store MS5607 data in AltosConfigData for use by AltosMs5607
  * altosuilib: EEProm download from TeleGPS doesn't have states
  * altosuilib: Don't show 'Sats in view' for TeleGPS eeprom graphing
  * altoslib: Support TeleGPS for Monitor Idle
  * altoslib: Use 'stateless' for Monitor Idle
  * altoslib: Initialize GPS data to MISSING for Monitor Idle mode
  * altos/drivers: Increase SPI speed of CC115L to 6MHz
  * altos/lpc: Give up on interrupt-driven SPI driver
  * altos: Separate out ao_tracker force from dbg
  * Update version 1.6 release notes with more bug fixes
  * altos: ao_packet_getchar needs to return 'int' so AO_READ_AGAIN works
  * altosui: Remove the dregs of AltosDroid load-old-telem code
  * altoslib: Mark listener as 'not running' on EOF.
  * altosuilib: Wait for product data while scanning
  * altoslib: Drop telemetry packets processed while monitoring is disabled
  * altosuilib: Reset telemetry state after processing it
  * altoslib: Clear saved TelemetryReader state instead of resetting in ScanUI
  * altosuilib: Set the icon and title of the telemetry scanning dialog
  * doc: update 1.6 release notes with recent bug fixes
  * altosuilib: Get the Eeprom download progress bar working again
  * altosuilib: Don't offer to graph some GPS details that TM doesn't log
  * Bump java library versions

  [ Bdale Garbee ]
  * updated to reflect changes from 1.5 release
  * reflect filename changes in LLC repo
  * store cal value correctly even when we didn't need to change it
  * document pyro current limits in an appendix
  * improve test procedures for TeleMega
  * document addition of TeleDongle to the set of ARM targets to save binaries for
  * update ChangeLog for release

 -- Bdale Garbee <email address hidden>  Sat, 07 Feb 2015 22:40:49 -0700

Upload details

Uploaded by:
Bdale Garbee on 2015-02-08
Uploaded to:
Original maintainer:
Bdale Garbee
Medium Urgency

See full publishing history Publishing

Series Pocket Published Component Section
Xenial release on 2015-10-22 universe electronics


File Size SHA-256 Checksum
altos_1.6-1.dsc 2.1 KiB 30a417ec5bacd734d61c8ed38c419ff9a6cbe7968923c6ef6d0308f9c3a61866
altos_1.6.orig.tar.gz 27.3 MiB 3d94477eba3a0b16e5036ef25ccffbd516f81b93296253cbebf1a0eaef71367f
altos_1.6-1.debian.tar.xz 49.8 KiB 5ccf948a3f4d19c39e807c8c9ac16032d47904ebd90e77ef287b1c9c4b3512a4

Available diffs

No changes file available.

Binary packages built by this source

altos: No summary available for altos in ubuntu wily.

No description available for altos in ubuntu wily.