Changelog
altos (1.0.2) unstable; urgency=low
[ Bdale Garbee ]
* update release process docs
* update changelogs for Debian build
* include 1.0.1 release notes in docs, closes: #642705
* add run-time dependency on libjfreechart-java
[ Keith Packard ]
* altos: Delay reboot by a second to avoid re-entering idle mode
* Bump to version 1.0.2
* altos: TM: Don't turn on packet slave mode until idle/invalid state
* doc: Add 1.0.2 release notes
altos (1.0.1) unstable; urgency=low
[ Bdale Garbee ]
* use multimaint-merge to make Debian changelogs less ugly
* update TeleMini turnon script now that we've made a stable firmware release
* moving git-buildpackage config into .git/ since it is fairly specific to
Bdale's build environment, and doesn't need to be in the source package
* get ready for a 1.0.1 release
* update changelogs for Debian build
* fix telemini firmware path name
* ignore generated log file
* roll release notes version from 1.0 to 1.0.1
* roll back packaging changelog for rebuild
[ Keith Packard ]
* altos: Clear callsign on initial config load
altos (1.0) unstable; urgency=low
[ Keith Packard ]
* altos: Lost change that reported flight 0 when log memory was full
* altosui: Ancient log files used 'apogee' for 'coast' state
* altosui: Add 'On-board Data Logging' indicator to pad tab
[ Bdale Garbee ]
* update changelogs for Debian build
* update changelogs for Debian build
[ Keith Packard ]
* altosui: remove debug printf in pad pane
* altosui: Disable 'max flight log' config when there are stored flights
* altos: Merge common config code in ao_config.c
* Bump version to 0.9.7
* altos/altosui: Add ability to disable telemetry/rdf completely
* altosui: Clean up command line processing. Add --graph
* altos-fat/windows: Check and install Java 1.6 as needed
* altosui/windows: Fix a bunch of windows compiler warnings.
* altosui: Attempt to make both 32- and 64-bit windows DLLs
* doc: Add note about telemetry disable mode to 1.0 release notes
* doc: Add Installation Recommendations chapter
* altosui: Add a few simple unit conversions
* altosui: Capture date/time/serial/flight in AltosFlightStats
* altosui: Add date/time/serial/flight to flight stats tab
* altosui: Show filename in AltosGraph window
* altosui: Add --summary option to dump flight stats to stdout
* altosui: Make monitor-idle display correct 'On-board data logging' status
* altosui: Can't configure flight log max on TeleMini
* altosui: fix 'magic' string to signal end of config data
* altosui: Only 'show' config dialog once
* altosui: Reset all config data on 'reset' command
* altosui: Update mac os X library
* libaltos: fix Mac OS X function signatures
* altosui: add tool-tips to the button box.
[ Bdale Garbee ]
* turn off auto-tagging during Debian build
* update changelogs for Debian build
* rewind changelog to 0.9.6.0 for rebuild
* update changelogs for Debian build
[ Keith Packard ]
* altosui: Use system look&feel
* Remove stale tools (ao-dumplog, ao-postflight, ao-view)
* altosui: Add tool-tips to config dialogs
* altosui: Try to get dialogs to look a little better
[ Bdale Garbee ]
* another test round
* roll changelog back in prep for another test build
* update changelogs for Debian build
* add pkg-config to the build deps
* prepare for another rebuild
* update changelogs for Debian build
[ Keith Packard ]
* altosui: Don't trust companion telemetry record 'channels' count
* altosui: Make flight monitor font size configurable
* altos/windows: Get latest JRE 1.6 version (Version 6 update 27)
[ Bdale Garbee ]
* doc tweaks through chap 3
[ Keith Packard ]
* doc: Spelling corrections in altusmetrum.xsl
* doc: Document pad-mode 'on-board data logging' indicator
[ Bdale Garbee ]
* more doc tweaking
[ Keith Packard ]
* doc: Describe packet command mode a bit better.
* doc: Move Packet Command Mode section to System Operations chapter
[ Bdale Garbee ]
* more doc tweaks
* more tweaks
[ Keith Packard ]
* doc: use 'radio link' to refer to packet command mode
[ Bdale Garbee ]
* more tweaking
[ Keith Packard ]
* doc: Move updating device firmware section to separate chapter
* doc: Updating Firmware is now a separate chapter
[ Bdale Garbee ]
* more changes
[ Keith Packard ]
* doc: Move the remaining command-mode descriptions to the appendix
[ Bdale Garbee ]
* tweak tweak tweak
[ Keith Packard ]
* doc: Describe max flight log, ignite mode and pad orientation
* doc: Remove duplicate documentation about max flight log
[ Bdale Garbee ]
* more tweaks
* prepare to release
* don't deliver sources.list fragment in official Debian packages
* changes in preparation for upload to Debian
* ao-view is no longer included in the altos package, so have the
old-style Debian menu entry point to altosui instead
* rewind packaging changelog to last tagged version
* update desktop file for consistency with package section
* we need a main category in the desktop file
* really, I mean it, no longer deliver the sources.list fragment
* add a postinst to remove sources.list.d fragment delivered by old
private versions of this package, no longer needed once we have
official packages
altos (0.9.6.0) unstable; urgency=low
[ Keith Packard ]
* altos: Correct flight log max on Tm to 5k
* altosui: Change button to 'Configure Altimeter'
* altos: Remove pad_orientation functions from non-accel devices
* altos: Add ability to set arbitrary radio frequency
* altosui: Add dialogs to configure 'common' frequencies
* altosui: Convert from channels to frequencies
* Set version to 0.9.5.0
* altosui: altimeter is not spelled altimter
* altosui: Pull out BlueTooth support
* altos: minor type in comment about accel correction
* altosui: Must set radio calibration before radio setting
* altosui: A few misc cleanups.
* altosui: Have single radio_to_frequency function
* altosui: Save frequency after setting it in AltosFlightUI
* altosui: Show AltosFrequency in scan results
* altosui: Remove debugging printfs from AltosSerial
* altosui: Flush radio setting to serial device
* altosui: Remove unused AltosConfigData from AltosTelemetryReader
* altosui: Reading serial from swing thread only bad if remote
* altosui: Make set of telemetries to use while scanning configurable
* altosui: Add close button to 'fire' dialog
* altos: Switch telemini from v0.1 to v1.0
* altosui: Don't export product defs from libaltos
* altosui: Ensure serial code tracks reply nesting correctly
* altosui: Ship TeleMini v1.0 firmware with fat blobs
* Altosui: Add flight statistics tab to graph window
* altosui: Add a 'Graph Flight' button to the 'landed' tab
* altosui: Prune telemetry file graphs to just the flight
* altosui: Plot reasonable data from Tm files
* altosui: Move launch-sites.txt file to altusmetrum.org
* Bump version to 0.9.6.0
* doc: Update altusmetrum.xsl for v1.0 software and TeleMini
* doc: Document Ignite Mode and Pad Orientation configuration options
* doc: Describe 'stats' tab in Graph UI, 'Graph Flight' button.
* doc: Add telemetry docs to debian/linux/mac/windows packages
* doc: Add release notes, include them in altusmetrum doc. Shuffle altusmetrum
* doc: Add 1.0 release notes.
* altos: Pull igniter pins low as soon as possible at boot time
* altos: Apply igniter boot pulse-width reduction to telemini
* altos: remove monitor disable stubs from altimeter code
* ao-tools: ao-list was crashing with more than 3 devices connected
* libaltos: Mis-allocated device list in libaltos
* altos: shrink text space from ao_config.c
* altos: re-write a bit of GPS parsing code to reduce size
* altos/altosui: Report log format in the version command
* altos: Don't try to use non-basestations for remote eeprom download
* altos: Add SPI-based companion board support
* altos: Put SPI in slower mode when talking to companion board
* altos: Make sure companion task exits cleanly when done
* altos: add the 'L' command to show the status of a linked companion board
* altos: Check for companion init packet validity was busted
* altosui: Add companion support to the flight UI and CSV conversion
* altos: Send SPI message at flight state changes
* altos: Send serial/flight to companion board
* altos: wait 10s for companion to boot
* altosui: Clean up eeprom parsing a bit
* altosui: Add support for TeleScience eeprom download
* altosui: Devices with log-format can also delete flights
* altosui: Eliminate inter-chunk flush_input calls
* altos: AltosSerial.flush_input shouldn't discard Interrupted exceptions
* altos: Correct AO_CONFIG_MINOR from 6 to 7
* altos: Reset radio channel to zero when using radio setting
* altos: use raw height while waiting for landing
* altosui: don't set channel when using radio setting
* altosui: Respect storage limits in flight log max config
altos (0.9.4.5) unstable; urgency=low
[ Keith Packard ]
* altosui: Mark empty eeprom records 'invalid', don't generate exception
* altosui: Always read whole eeprom block, even at end of flight
* altosui: Display eeprom parsing errors to user
* Revert "src/ao_gps_skytraq.c: Update logging rate to 10Hz"
[ Anthony Towns ]
* src/ao_cmd: Shave off bytes from doc strings
[ Keith Packard ]
* altos: Oops. Lost a couple of commands when merging the doc patch
* altosui: Missed jcommon.jar in the Mac OS install image
* Bump published version number to 0.9.1
* aoview: remove -s option.
[ Anthony Towns ]
* ao_intflash: Use internal flash for storage
[ Keith Packard ]
* altos: Make serial, usb, beeper and accelerometer optional components
* altos/test: Use ao_convert.c instead of hand-coded pres → alt func
* altos/test: Add baro-only flight test program
* altos: Start with packet slave running. Turn off in pad mode.
* altos: Add TeleMini v1.0
[ Anthony Towns ]
* ao_intflash: Avoid overwriting code
[ Keith Packard ]
* altos: Switch LED usage for TeleMini around
* altos: Switch pins around for TeleMini
* bringup: Add script for telemini
* ao-load: Make usb descriptor rewriting optional
* altos: oops -- altitude reporting wasn't pausing between signals
* altos: Internal flash ops block when running from flash
[ Anthony Towns ]
* ignore new flight test file
[ Keith Packard ]
* altos: Add tiny logging for TeleMini/TeleNano
* altos: Add kalman filters for baro-only boards
* altos: Tiny logging fixes. Scan at start, stop when land or full.
* altos: Add TeleNano support
[ Bdale Garbee ]
* fix up script to work and have reasonable texts
[ Keith Packard ]
* altos: Fix mini/nano default log size to available flash space
* altos/test: Add scripts to run lots of flights through the code
* altos: Write height values to log for nano/mini
* altos: Baro-only boards must not detect launch on accel or speed data
* altosui: Add software version to Configure AltosUI dialog
* altos: Don't init packet slave on TD. Make slave start optional
* altos: Configure packet size from send/recv parameters.
* altos: Make telemetry interval more consistent
* altos: Split out tiny telemetry from full telemetry
* altos: Split telenano main from telemini
* altos: The kalman code requires a constant sample rate
* altos: New telemetry report format (version 4). Supports tiny telemetry.
* altos: Add .sdcdbrc file for teledongle
* altos: Add nickle kalman implementation.
* altos: Switch telemetrum over to kalman filter
* altos: Compute a 'trust' value for the barometer
* altos/kalman: Kalman terms can be > 1, use 32-bit fixed point
* altos: Clean up some debug stuff in ao_flight.c
* altos: Add ao_flight_debug code
* altos: Missing parens and some bad arithmetic in the kalman code
* altos: Fix up flight code testing
* altos: Restore sensible kalman values
* altos: Ignore alt error for fast->coast. Allow larger error for baro apogee.
* altos: Exit flight test at landing. Allow description in test flight list
* Add ao_kalman.h to .gitignore
* Add description to test flights
* altosui: Add support for telemetry version 4
* altosui: Add telemetry format menu and preferences
* altosui: Remove a bunch of debug printfs from the eeprom manager code
* altosui: Add support for downloading TeleMini/TeleNano flight logs
* altosui: Remove extra AltosEepromBlock layer
* altosui: swing hide/show methods are deprecated
* altosui: Allow TM config connection to be canceled.
* altos: Variable log rate in full logging code too
* altos: full logging must flush pending data before checking state
* altosui: Off-by-one error in telemetry format configuration UI
* altosui: Allow radio channel to be configured over the radio link
* altosui: Tell serial device which frame to use for timeout dialogs
* altosui: Handle serial calls from swing thread
* altos: Split up flight code into separate flight/sample/kalman bits
* altos: Create custom nano flight code
* altosui: Clean up packet link connecting dialog
* altosui: Make flight log downloading handle 'Connecting...' dialog
* altosui: Make deployment testing handle Connecting... dialog
* altosui: Display exception messages from swing thread
* altosui: Don't display 0000-00-00 for missing flight log dates
* altos: ao_sample_preflight was exiting preflight mode immediately
* altos: Run RDF beacon after apogee instead of waiting for landing
* altos: Enable logging during nano flights
* altosui: Parse and export Max flight log value
* altosui: Only plot acceleration when present in data file
* altos: Reflect ao_flight split in ao_flight_test dependencies
* altos: Baro useful ceiling is MSL, not AGL
* altos: Make ao_flight_test show true height but report saturated height
* altos: Add initial TeleBT code
* altos: Add P2SEL_*_MASK defines to cc1111.h
* altos: expose set of available stdio values
* altos: Provide for a pre-filter on commands
* altos: Allow any stdio to be used with packet forwarding
* altos: Remove serial monitor command
* altos: Make ao_serial_drain public
* altos: Clean up usage of serial port for stdio
* altos: Clean up serial initialization
* altos: Make cmd echo per-connection instead of global
* altos: Clean up BT serial communcations
* altosui: Add missing AltosTelemetryMap.java file
* altos: Use PIO(6) on BTM to monitor BT connection. Fix BTM init.
* altosui: Add TeleBT USB device support
* altosui: Add low-level Bluetooth APIs
* altos/altosui: Log averaged baro sensor data in Tm/Tn
* altosui: oops - lost state changes when downloading eeprom data.
* altos: Write a few pre-launch samples for Tm/Tn devices
* altosui: Add primitive bluetooth device manager UI.
* altosui: Create abstract AltosDevice class
* altosui: Make AltosBTDevice implement AltosDevice interface
* altosui: Make bluetooth dialog modal
* altosui: Use persistent list of bluetooth devices for device dialogs
* altos: Add delays to bt startup sequence
* altosui: Wait two seconds after bluetooth connect XXX
* altos: Solidify BT connections
* altos: Simplify BT communications
* altos: Remove bt debug command
* altos: remove BT logging code
* altosui: Eliminate ao_cmd_filter hook
* altosui: Make flight data download work through TeleBT
* altos: add telebt-v0.0 Makefile
* altosui: Separate out flash debug code to separate thread
* altosui: Fix TeleBT name in flight monitor title
* altosui: Display reader name (usually the device) when an I/O error occurs
* altosui: Move AltosIgniteUI device open out of Swing thread
* altosui: Fix BT manage dialog so that the device lists resize
* altos: Add preliminary telebt v0.1 defines
[ Bdale Garbee ]
* first cut at a telebt turn on script
[ Keith Packard ]
* altos: Add telebt-v0.1 to Makefile
* altos: Use USART configuration 1 with flow control for TBT
* altos: Fix BT link status pin for real TBT hardware
* altos: pull TBT v0.1 ser_reset line low
* altos: Add beeper to TBT v0.1
* altos: Debugging TBT issues -- check pin configuration after boot
* altos: Initialize beeper for telebt
* altos: Hook up the P1 ISR for TeleBT v0.1 bt_link line
* altos: clear CPU port 1 interrupt flag when handled
* Revert "altos: Debugging TBT issues -- check pin configuration after boot"
* Switch version to 0.9.4
* altosui: Handle old TeleDongle receiving kalman telemetry packets
* altos: Rename telemetry to telemetry_orig
* altos: Add arbitrary telemetry packet monitoring
* altos: Add checksum to TELEM output lines
* altos: Start adding new telemetry frame definitions
* altos: ao_radio_recv needs byte count *including* rssi and status
* altosui: Support raw telemetry from TeleDongle
* doc: Add telemetry format description
* doc: Complete initial telemetry description
* doc: Fix a few minor telemetry doc mistakes
* Version strings must be < 8 bytes long
* altos: teledongle does not need ao_packet_slave.c
* altos: Shrink const space in ao_config
* altos: Add sat info to GPS report command
* altos: Shrink help text
* altos: Add split telemetry code
* altos: Complete new telemetry switchover
* altosui: Parse remaining standard telemetry packets
* doc: Chang Config and Location packets
* altos: Adapt to changes in telemetry Configuration packet
* doc: Add section about TeleDongle USB line format
* altosui: Elide nul bytes at end of telemetry string values
* altosui: Elide missing values from graphs
* altosui: Add main/drogue voltages to default graph
* altosui: Remove debug printf.
* altosui: Compress telemetry records marked with the same time
* altos: Shrink ao_cmd_put16, ao_cmd_hex and ao_cmd
* altos: Shrink ao_config_callsign_set
* altos: Shrink ao_add_task by rolling up a memset loop
* altos: Switch ao_gps_skytraq and ao_gps_sirf __xdata to __pdata
* altos: Switch ao_ignite and ao_gps_sirf __xdata to __pdata
* altos: Switch ao_log.c and ao_log_big.c __xdata to __pdata
* altos: Switch ao_report.c __xdata to __pdata
* altos: Switch ao_rssi.c __xdata to __pdata
* altos: Switch ao_sample.c __xdata to __pdata
* altos: Switch ao_serial.c __xdata to __pdata
* altos: Switch ao_stdio.c __data to __pdata
* altos: Switch ao_telemetry.c __xdata to __pdata
* altos: Switch ao_usb.c __xdata to __pdata
* altos: Switch const for __code in struct ao_cmds
* altos: switch ao_cmd __xdata to __pdata
* altos: Switch ao_config.c __xdata to __pdata
* altos: Switch ao_dbg.c __xdata to __pdata
* altos: Switch ao_flight and ao_flight_nano __xdata to __pdata
* altos: Switch flash drivers __xdata to __pdata
* altos: Switch Tm and Tn to common telemetry code
* altos: Remove ao_telemetry_orig.c and ao_telemetry_tiny.c
* altos: Ensure low-rate telem packets interleave with sensor telem packets
* altos: product defines are always in ao_product.h
* altosui: Build device constants into .java code
* altosui: Don't show missing igniter and gps values
* altos: new versions of sdcc require __ prefixes for custom keywords
* Set version to 0.9.4.3 for Bdale 2011-7-16 flights
* altosui: Start adding support for scanning radio for available devices
* altosui: Pop up monitor window from scan dialog
* altosui: Remove debugging printf from AltosLog
* altosui: Configuration telemetry record includes flight number
* altosui: Finish radio scanning UI
* altosui: Generalize and centralize telemetry constants, parse v0.8 telemetry
* altosui: Initialize channel and telemetry before use in ScanUI
* altosui: Set 'seen' bits in legacy telemetry packet reader
* altosui: Add map preloading GUI
* altosui: Try to avoid resize weirdness with map preloading
* altosui: Flush telemetry lines before starting to watch for scan results
* altosui: Display full map preload area in view.
* altosui: Remove a bunch of sitemap debugging printfs
[ Anthony Towns ]
* altosui: Make sure degree and minute values are visible (map preload)
[ Keith Packard ]
* Set version to 0.9.4.4
* altos, altosui: Add igniter mode (dual, apogee, main)
* altosui: Download list of site locations for map preloading
* altosui: Add launch-sites.txt
* altosui: Add a bunch more site locations
* altosui: Mark preload site location with red circles (like launch)
* Fix NCR Pawnee location
* Add HARA Bragg Farms site
* altosui: Change continutity colors to yellow/magenta
* altos: Add ability to read new TELEM files to ao_flight_test
* altos: Average height values for landing detection
* altos: Reduce height averaging filter time constant
* altos: Require sequencing through 'main' state before landing
* altosui: Standard text field in flight UI needs more width (now 20)
* altosui: Parse accel cal from 'c s' command
* altosui: Simple timeouts don't work with query data
* altosui: Add idle monitor dialog
* altos/altosui: Add pad orientation configure option
[ Bdale Garbee ]
* update version for a Bdale build for use turning on TeleMini v1.0
* simplify version in last changelog entry so git-dch is less confused
* update changelogs for Debian build
* update changelogs for Debian build
* stop doing automatic tag push during builds
* build depend on bluetooth dev package
* clean up all existing lintian warnings
* rewind changelog for re-build of 0.9.4.5
altos (0.9.1) unstable; urgency=low
[ Keith Packard ]
* ao-load: fix usage message to note that '=' is required for options
* altos/test: Add dependencies in the Makefile for ao_flight_test
* altos/test: auto-configure acceleration parameters from the log file
[ Anthony Towns ]
* ao_radio: generalise setup of packet size
* src/ao_gps_skytraq: simplify parsing code
* src/ao_gps_skytraq.c: Update logging rate to 10Hz
[ Bdale Garbee ]
* tie bringup scripts to Bdale's bench TeleDongle
altos (0.9) unstable; urgency=low
[ Bdale Garbee ]
* prepare to release
* update changelogs for Debian build
* update turnon script to prefer TeleDongle as programmer
[ Keith Packard ]
* altos: Program default flight log max value for new boards
altos (0.8.1+81+g4ae724f) unstable; urgency=low
* we need an install target to prevent parent dir make from failing
altos (0.8.1+79+g9a5666f) unstable; urgency=low
[ Keith Packard ]
* doc: Don't delete telemetrum-outline.pdf
* doc: Add v0.9 features from altosui to documentation.
[ Bdale Garbee ]
* add 0.9 revision entry, with caveat about telemetry format change
* freshen copyright year
[ Keith Packard ]
* fat: Add firmware for v1.1 and docs to mac/windows/linux installers
* fat: Add docs to Linux package
* doc: Build with 'make all' from top level. Build with 'make fat'
altos (0.8.1+71+gda42f40) unstable; urgency=low
[ Keith Packard ]
* doc: Add telemetrum mounting template in svg and pdf forms
[ Mike Beattie ]
* Re-order and re-arrange eeprom download dialog
* Convert EepromSelect dialog to use a GridBag
* Close serial port if Download/Delete dialog is cancelled.
[ Keith Packard ]
* altosui: Reset eeprom download instance variables before reading
flight
* altosui: Make serial debug more complete and accurate
* altosui: Use long input flush timeout when remote.
* altosui: Remove debug message when eeprom downloads are complete.
* altosui: Ensure serial device is closed after eeprom download
finishes
* altosui: Require 4 sats to light up the 'GPS locked' light.
* doc: inkscape tracks the filename inside the document
* altos: TELEMETRY PROTOCOL CHANGE. Switch to 16-bit serial numbers.
* altos: Flush log when full
[ Anthony Towns ]
* altos: Restructure skytraq NMEA parsing code to save some space
[ Keith Packard ]
* altos: average 512 accel/baro samples at startup instead of 1000
[ Mike Beattie ]
* altos: Added check for an accel value above 1.5g
* altos: Added check for out of bounds accel
[ Keith Packard ]
* altos: Add DATA_TO_XDATA to linux test harness
* altosui: Remove spurious colons from eeprom selection headers
[ Mike Beattie ]
* Rework invalid accel cal detection code
[ Keith Packard ]
* altos: Auto-calibrate linux-based flight testing code
* altos: Ensure flight code gets first crack at new ADC data
* altos: Sample the accelerometer reference voltage on v1.1 boards
* altos: Optimize fetching of ADC data in flight code
* altos: Use 5V reference data to correct accelerometer measurements.
* doc: Remove mention of ao_wake_task
[ Bdale Garbee ]
* update documentation to reflect reality that modifying a board for
separate pyro battery is not trivial
altos (0.8.1+42+g646e192) unstable; urgency=low
[ Keith Packard ]
* altosui: Show dialog after successful delete or when no flights
* altosui: Ensure serial line is flushed after disabling remote link
* altosui: Add preference for serial debugging.
altos (0.8.1+37+g97b1ca9) unstable; urgency=low
[ Keith Packard ]
* altos: Add configuration parameter for maximum flight log size
* altos: support storage of multiple flights.
* altos: Speed up at45 and 25lc erase speeds
* altos: white space fix
* altos: report flight log offsets in hex block numbers instead of
bytes
* altos: ensure erase mark is written when erasing flights
[ Anthony Towns ]
* altos: Optimize Morse code generation
[ Keith Packard ]
* altos: Check requested log max size against available space
* altos: Check for full log and complain
* altosui: Add configuration of flight log size
[ Anthony Towns ]
* altos: Remove unused accel_vel_mach and accel_vel_boost variables
* altos: Remove redundant initialization of ao_interval variables
[ Keith Packard ]
* altosui: Split eeprom download code apart
* altos: oops -- 'e' command was only showing 7 of the 8 bytes per
line
* altosui: Add support for parsing list of flights from the 'l'
command
* altosui: Add eeprom 'manage' ui to download and delete multiple
flights
* altos: check for valid flight number in ao_log_delete
altos (0.8.1+18+g408a3e0) unstable; urgency=low
[ Anthony Towns ]
* altosui: move maps to subdir, fix E/W mismatch
[ Keith Packard ]
* altos: clean up radio abort paths. Share radio code.
* altos: eliminate ao_wake_task
* windows: Add compatibility IDs to telemetrum.inf
* windows: Update NSIS installer file to use compatibility IDs
* altos: Split out SPI driver.
* altos: Add telemetrum-v1.1 directory
* altos: packet and usb i/o routines use 'char', not 'uint8_t'
* altos: Simplify storage API
* altos: Require manual flight erasing.
* altos: Move common storage code to ao_storage.c. Add M25P80 driver
* altos: Rip out 'optimization' in ao_log_scan
* altos: Mark end of available flight list with 'done' to make the UI
altos (0.8.1+4+gea95c06) unstable; urgency=low
* fix symlink paths in rules file
altos (0.8.1+2+gea7130e) unstable; urgency=low
* modify Debian package build to deliver one copy of background.png
for
altos (0.8.1) unstable; urgency=low
[ Bdale Garbee ]
* moved doc dir in web content to AltOS tree
* fix publish target in doc/Makefile
* fix section layering
* fix an Altos vs Altus typo in the docs
* adding Bdale's release process document to the source tree
[ Keith Packard ]
* windows: Add jfreechart.jar and jcommon.jar to windows install image
* Move "Releasing" to top level
* Add minimal release testing plan to Releasing
[ Bdale Garbee ]
* releasing 0.8.1
altos (0.8) unstable; urgency=low
[ Keith Packard ]
* altosui: Correct windows hardware IDs for nsis installer file
* windows: try harder to get windows install to work
* windows: remove some non-existent .inf file section references
* windows: more .inf file hacking
* windows: Bump .inf file version
[ Bdale Garbee ]
* declaring 0.8 released
* update changelogs for Debian build
* update changelogs for Debian build
* rewind changelog to recover from stupid build failure
altos (0.7.1+168+gcb08bc2) unstable; urgency=low
[ Keith Packard ]
* altosui: Split out flight monitoring to separate window
* altosui: Create buttons for main actions
* altosui: Fix channel setting at serial open time
* altosui: Fix more calls to AltosPreferences.channel()
* altosui: Create abstract interface for flight data display
* altosui: Add tab UI with 'pad' mode.
* altosui: Add ascent, descent and landed tabs
[ Bob Finch ]
* Updated PKGBUILD-git.altos
[ Keith Packard ]
* altos: Use grey leds when unlit - easier to see
[ Anthony Towns ]
* use value_font for values
* add --replay command line argument
* read preferences for --replay
* reduce font size for FlightInfoTable
* use grayled.png for off
* add compass bearing to voice output
* add compass bearing during descent
* add site map tab, at least for QRS launches
* tabs -> spaces
* make infotable scrollable, revert its fontsize to 14
* pull up maps for arbitrary locations
* better error behaviour if no map
[ Bdale Garbee ]
* first cut at instructions on how to re-flash TM and TD devices based
on email
* fold in content from Keith's email on the re-flashing subject
[ Keith Packard ]
* altosui: Add RF calibration to TeleMetrum config dialog
[ Anthony Towns ]
* AltosTelemetryReader: actually open serial port
* AltosSiteMap: add targeting circles around landing site
[ Bdale Garbee ]
* continuing to work on the docs
[ Keith Packard ]
* altosui: Eliminate unncessary import altosui lines
* altosui: Open serial device at 'new' time. Prohibit duplicate opens.
* altosui: Replace flight status table with labels, fix resize.
* altosui: With --replay option, exit when replay window is closed
* altosui: oops, missed a file in the previous commit
* altosui: eliminate menu bar, moving elements to buttons.
* altosui: add reboot button to telemetrum configuration UI
[ Bdale Garbee ]
* add a paragraph about forcing TM back to idle mode if an accel cal
goes badly
[ Keith Packard ]
* altosui: Add callsign configuration in AltosUI configuration dialog
* altosui: Cleanup flight UI layout
* altosui: Add igniter status to ascent and descent tabs
[ Anthony Towns ]
* altosui: tile site maps
* AltosSiteMapTile: autoscale to about 2 nmi per tile
* AltosSiteMapTile: adjust centering calculation
* AltosSiteMapTile: adjust scale to 1 nmi per tile
[ Keith Packard ]
* altosui: Add igniter ground testing code
* altosui: Unify datafile selection to AltosDataChooser
* altosui: Clean up global AltosUI configuration settings dialog
* doc: Add preliminary altosui documentation
* doc: git ignore generated doc files
* doc: Document the 'Flash Image' operation.
* altosui: Use timeouts to recover from broken packet links.
[ Bdale Garbee ]
* update turnon scripts to use stashed copies of stable release
firmware
[ Keith Packard ]
* altosui: switch channel selector to combo box. Shorten displayed
device names
* altosui: When switching log files, don't terminate log thread
* altosui: calling thread.interrupt with null thread doesn't work well
* altosui: Initialize display thread state in constructor instead of
run
* altosui: Fix channel changing in flight UI to actually work
[ Anthony Towns ]
* AltosSiteMap: add autoscroll and grabndrag scroll
* AltosSiteMapTile: seperate map and drawing layers
* AltosSiteMap: automatic fetching of map data
* AltosSiteMapTile: draw boost circle as well as landed
* AltosAscent/Descent: tidy up layout
* AltosDescent: switch elev from height to range
[ Keith Packard ]
* altosui: re-indent
[ Anthony Towns ]
* AltosSiteMap: major refactoring
* Add GrabNDrag.java
[ Keith Packard ]
* altosui: change descent tab formatting to four columns
[ Anthony Towns ]
* AltosSiteMap: be more polite about preferred size
* altosui: reindent
[ Keith Packard ]
* altosui: Rewrite info table to mix with scroll pane well. Fix
startup size
[ Anthony Towns ]
* AltosSiteMap: better gps check, lower zoom
[ Keith Packard ]
* altosui: Set site map flight path lines to 6 pixels anti-aliased.
[ Anthony Towns ]
* AltosSiteMap: explain tile size better
* AltosSiteMap: extend map if rocket goes far away
* AltosSiteMap: try to get new tile construction right
* AltosSiteMap: thread safe tile addition
* AltosSiteMap: refactor tile collection
* AltosSiteMap: never accept 0,0 as lat/long
* AltosSiteMap: limit nr of tiles to 200x200
[ Keith Packard ]
* altosui: When fixing eeprom gps time information, make GPS data
valid
[ Anthony Towns ]
* AltosSiteMap: ensure buffer around active tile
* altosui: improve sitemap scrolling behaviour
* altosui: keep sitemap more centred on rocket
[ Keith Packard ]
* altos: Add on/off modes to 'C' command
[ Bob Finch ]
* Added PKGBUILDs for deps into contribs
[ Keith Packard ]
* altosui: Close serial port when debug link fails
* altos: assume igniter worked.
[ Bdale Garbee ]
* add a rudimentary --help for command line use
[ Keith Packard ]
* doc: Add internal documentation for AltOS
[ Anthony Towns ]
* altosui: don't switch away from user selected tab
* altosui: sitemap uses rocket gps if no pad gps
[ Bdale Garbee ]
* merge Keith's AltosUI documention into "the big book"
* lose the placeholder on how GPS works, as it's going to be a
[ Keith Packard ]
* altos: remove unused variable from ao_igniter
* altos: Don't abort radio transmissions with ao_radio_abort
* altos: Make radio test command careful with the radio mutex.
* altosui: Make AltosSerial.flush_input keep reading while non-empty
* altosui: New AltosSerial.set_radio function sets channel/call
* altosui: Disable radio configation over packet link.
* altosui: Let people fire igniters that don't read as 'ready'
* altosui: Make sure packet mode is turned off when the connection
fails
[ Anthony Towns ]
* docs: Document altosui "Graph Data" button
[ Keith Packard ]
* Move altosui to the top level, placing libaltos inside it.
[ Anthony Towns ]
* doc: Document altosui "Site Map" tab
[ Keith Packard ]
* Missing change to top level Makefile to build altosui
[ Bdale Garbee ]
* fix missing section close in Site Map content
* tweak rev history
* manually fold in documentation work from the master branch
[ Keith Packard ]
* doc: Reformat altos to use sections for each function
* doc: Add more authors, fix URL formatting, note that AltosUI
actually exists
* doc: Rename telemetrum-doc as altusmetrum
[ Bdale Garbee ]
altos (0.7.1+36+g811ced6) unstable; urgency=low
[ Bdale Garbee ]
* remove the csv build dep, as that code will be abandoned
[ Keith Packard ]
* altosui: Remove ability to graph data in .csv files
* altosui: Separate out jfreechart and jcommon directories
altos (0.7.1+32+g8103432) unstable; urgency=low
* add build-dep on libcsv-java
altos (0.7.1+28+gd8a2f4c) unstable; urgency=low
[ Bdale Garbee ]
* make the column headers comma separated, too, so they align with the
data
[ Keith Packard ]
* altosui: set default .csv file name in file save dialog
* altosui: Remember directory containing firmware files
[ Anthony Towns ]
* Add graphing.
* Add JFreeChart to Makefile.am
[ Keith Packard ]
* altosui: Use recorded ground acceleration when reading eeprom files
* altosui: Write raw sensor data to .csv files
* altosui: Factor some UI elements into separate classes
* altosui: remove unused ReplayThread wrapper classes
* altosui: Require 4 sats for 'good' GPS data
* altosui: Create iterables for log file scanning. Split out display
threads
* altosui: .CSV output: add link quality, gps hdop and sat C/N0
numbers
* altosui: Deal with eeprom dates going backwards across wrap
[ Anthony Towns ]
* Hax0r graphing to support telem/eeprom files
[ Keith Packard ]
* altosui: use Altos constants in graphing code
[ Anthony Towns ]
* Add callsign/serial/flight to graph title
[ Keith Packard ]
* altosui: Add KML file export.
[ Bdale Garbee ]
* add build dep on jfreechart lib
altos (0.7.1) unstable; urgency=low
[ Keith Packard ]
* Add firmware and libaltos to 'fat' target at top-level
* altosui: Remove some debug printfs.
* altosui: libaltos.so is built with libtool -- it's in
../libaltos/.libs
* Add --with-fat-dir configure option to publish finished stand-alone
bits
* altosui: Fix telemetry file reader to handle tick count wrapping
* altosui: Remove debug printfs from AltosTelemetryReader
* altosui: Fill in time value of last Eeprom record read from file
* altosui: Stop parsing eeprom file after hitting 'landed' state
altos (0.7+96+g48f5799) unstable; urgency=low
[ Keith Packard ]
* altosui: conflating USB product and vendor IDs is a bad idea
altos (0.7+94+g1ac3d7e) unstable; urgency=low
* initial cut at an altosui man page
altos (0.7+92+g0ea7576) unstable; urgency=low
[ Bdale Garbee ]
* handle versioning of ihx files (poorly) by just wildcarding the file
name
[ Keith Packard ]
* altosui: Need to have JVM include path substituted into libaltos
Makefile
* altosui: Store libaltos.so in $(libdir)/altos
* altosui: Display error dialog when AltOS JNI library can't be loaded
altos (0.7+86+g6c0ae7e) unstable; urgency=low
[ Keith Packard ]
* altosui: Add explicit requirement to create classes directory
* altosui: fix telemetrum.inf FFFE:000A product names on AMD64 and
ia64
* altosui: hack to make JAVAROOT directory get created before javac
runs
* altosui: remove FATJAR from all-local to avoid building fat .jar
file
[ Bdale Garbee ]
* add libtool to build deps
[ Keith Packard ]
* altosui: Add windows installer build using 'nsis'
* altosui: ignore built files
* altosui: oops. renamed the nsis file to altos-windows.nsi
* icon: add some icons for application programs
* altosui: Add icons to application and Windows menus.
* Use autotools for altosui and libaltos
* altos: add some SDCDB config files
* Ignore libtool files.
* Add version numbers to released files. Set version to 0.7.1
* Add top-level 'fat' target to aid building distribution files
* altosui: Fix windows installer to ship correct files
* altosui: Fix up Mac OSX .zip file
* altosui: Fix linux fat distribution
* altosui: Return AO_LOG_INVALID instead of exception for eeprom files
* altosui: Remove debugging printf from AltosEepromReader
* altosui: Eeprom files contain only one date; save it.
* altosui: Add elevation and range data to main display
* altosui: When replay thread is interrupted, don't make final report
* altosui: Start idle thread after the rocket leaves the pad
* altosui: Add AltosVoice.drain() to wait for queued speech to finish
* altosui: Prevent voice altitude data from queueing up
* altosui: Use local .class files in the classpath
* altosui: Record flight number when scanning file, not when running
* altosui: eeprom files place 'boost' time in the flight number
record.
* altosui: ensure that 'altosui' script is installed. Pass arguments
along.
altos (0.7+53+g59798c6) unstable; urgency=low
[ Keith Packard ]
* altosui: Abort flashing if debug port isn't working
* altosui: allow flashing to be canceled from the rom config dialog
* altosui: Hide internal rom config UI helper function
* altosui: Remove some debug printfs from AltosRomconfig class
* altosui: Post error dialog on invalid ROM config values.
* altosui: build Mac OS .zip file to include paths
* altosui: Report telemetry CRC errors in UI
* altosui: Deal with altos bug setting radio channel while monitoring
* altosui: Allow 'connect to device' when already connected
* Revert "altosui: Deal with altos bug setting radio channel while
monitoring"
* altosui: Must flush serial line after configuring for telemetry
* altosui: Catch I/O errors on telemetry device, report to user
altos (0.7+40+g59a40f6) unstable; urgency=low
[ Bdale Garbee ]
* add distclean targets to libaltos and altosui to all Debian package
to build, and clean up other distclean content as needed
[ Keith Packard ]
* altosui: missed AltosReader.class in the Makefile
* altos: Bounds check Skytraq GPS tracking data array
* altosui: Remove Manifest.txt from git repo as it's built now
altos (0.7+28+gd006c5e) unstable; urgency=low
* add runtime dependencies for altos binary package
altos (0.7+26+gc35632e) unstable; urgency=low
* don't build all the "fat" jar deliverables by default
altos (0.7+23+g25764fc) unstable; urgency=low
[ Bdale Garbee ]
* fix up for an 0.7 release
* update changelogs for Debian build
[ Keith Packard ]
* libaltos: AltusMetrum devices use more than one USB ID.
* altosui: provide separate flush_input/flush_output for serial. deal
with monitor automatically
* altosui: discard invalid lines while reading Eeprom flight data
* libaltos: Mac OS X cannot use 'poll(2)' on serial lines.
* libaltos: Missing OS_LDFLAGS on cjnitest build
* libaltos: cjnitest needs altos_flush now
* altos: flush pending output when terminating packet mode
* altos: Abort radio harder when terminating packet mode.
* altos: shut down packet mode cleanly
* libaltos: Fix windows build.
* libaltos: Improve Makefile
* Update telemetrum.inf to include all current USB ids.
* libaltos: Add pre-built Mac OS X libaltos.dylib
* libaltos: Add pre-built Windows .dll
* altos: Windows sends USB Out packets of 0 length. Ack them.
* libaltos: Use overlapped I/O on windows
* altosui: Build linux, mac and windows archives on Linux
* altosui: build debian-style altosui too
* altosui: Devices with USB id 0x000a always get listed
[ Bdale Garbee ]
* continue even if rm's don't have anything to do
* make invocation of 'install' pathless to work on more Unix variants
* add a .gitattributes file, configuring the Mac and Windows binary
library
altos (0.7) unstable; urgency=low
* update changelogs for Debian build
* fix up for an 0.7 release
altos (0.6+375+g0bd4cc0) unstable; urgency=low
* fix path to installed shared library
altos (0.6+373+gcf65c6b) unstable; urgency=low
[ Keith Packard ]
* altosui: rename AltosEeprom -> AltosEepromDownload, split out Altos
constants
* altosui: Capture config and version info in .eeprom files
* altosui: Merge gps date and time classes into gps class
* altosui: Clear displayed data rows as needed.
* altosui: Split status and info panels into separate files
* altosui: Explicitly initialize Altos class
* altosui: Split flight record out of telemetry class
* altosui: Compute flight state from eeprom data
* altosui: Add comments to Eeprom reader
* altos: add callsign to packet mode, increase payload to 64 bytes
* altosui: Start adding code to write csv files from eeprom/telem
files
* ao-dumplog: add --channel option (for use with -R option)
* libaltos: integrate Windows support.
* altosui: Select devices by USB vendor/product ID.
* altos: Define USB product ID in per-product Makefile.defs file
* altosui: Make teledongle callsign configurable
* altosui: Add TeleMetrum configuration
* altosui: Set callsign when fetching eeprom data over the air
[ Bdale Garbee ]
* add freetts as a build dep
* working on java packaging details
[ Keith Packard ]
* altosui: Add .ihx file reading code and stub out flashing UI
* altosui: Add debug dongle API, split flash UI out
* ao-dumplog: Fix --remote and --channel options to actually work
* altosui: pad TM config dialog values to avoid clipping descenders
* libaltos: use pipe to wake up getchar on close. use mutexes
* altosui: Add lots more cc1111 debug interface functions
* altosui: remove debug printf from AltosHexfile
* altosui: flush serial output before waiting for reply
* altosui: Remove debug printf from AltosRomconfig
* altosui: Finish device programming code
* altos: Place rom config variables in fixed location
* altosui: make default Manifest look for built-in freetts
* altosui: Separate out log file choosing dialog to share with CSV
generator
* altosui: refactor logfile chooser dialog to share more code
* altosui: Add ability to create CSV file from telem or eeprom files
* altosui: disable radio monitoring while using serial line for
debugging
* altosui: Delay mapping Flash UI until flashing actually starts
* altosui: fetch existing romconfig for flashing
* altosui: always display romconfig ui while flashing
* altosui: write USB serial number string while flashing
* altosui: flush replies from serial link when entering debug mode
* altos: always rebuild ao_product.c to track git version
* altos: print GPS state flags in GPS 'g' command
* altos: mark gps date written only after it gets into eeprom
* altosui: Move number parsing code to Altos general class
* altosui: Add AltosGreatCircle constructors
* altosui: add rssi and distance/dir from pad to CSV files
* altosui: AltosEepromReader was mis-setting boost tick
* altosui: Add support for old (version < 3) telemetry files
* altosui: Serial line is in UTF-8 encoding. Deal with it.
* altosui: When parsing saved telem files, errors shouldn't abort file
* altosui: Remove debug printf from AltosState.java
* altosui: command line args are converted to csv format
* altos: prepare for sdcc 2.9.1
[ Bdale Garbee ]
* add a dummy install target
* lose the prebuild hook for now while I'm fumbling
* add install target for libaltos
* add an install target for altosui
[ Keith Packard ]
* altosui: add elevation and range information
[ Bdale Garbee ]
* fix up the wrapper's path to the jar file
* update Debian standards version
* fix permissions on installed jar file, switch from ao-view to
altosui in
* install altosui man page
* fix man page delivery path
* Revert "lose the prebuild hook for now while I'm fumbling"
altos (0.6+303+gb6da90b) unstable; urgency=low
* add freetts as a build dep
* move to science menu
* working on java packaging details
altos (0.6+292+g8fc261c) unstable; urgency=low
* see if my new freetts package works
altos (0.6+290+g7877496) unstable; urgency=low
[ Keith Packard ]
* altosui: check for closed serial device before reading
* altosui: Remove unnecessary freetts .jar files
* altosui: Close serial, join reader thread, free altos_file
* altosui: remove debug printf
* libaltos: build with java src encoding UTF8
* altosui: construct Darwin application directory
* Add Mac OS X packaging bits
* altosui: Switch eeprom extension back to .eeprom
* Moved Mac OS packaging to altosui dir
* altosui: remove option to install to alternate volume
* Make altosui test script executable
altos (0.6+277+gd184819) unstable; urgency=low
[ Bdale Garbee ]
* fix text since TM only has one led to blink
* add swig as a build dep
* add a jdk to the build deps
[ Keith Packard ]
* When the EP0 IN buffer is full, don't panic, just skip sending
another
* Add libaltos which talks to USB connected altos devices
* Switch AltosUI to libaltos for device access
* Present list of altos devices in nice format
* Re-enable freetts
* Re-enable Linux support for altosui.
* Darwin doesn't have strndup.
* libaltos needs -I. on all systems
* libaltos: make clean remove all built files
* libaltos: build fat 10.5-compatible library
* Add Mac OS X packaging files for altosui
* Add application icons for Mac OS X
* Clean up altosui build a bit
* Remove directories as .class file dependencies; it makes them get
rebuilt all the time
* Java clean ups -- use varargs where possible, remove
AltosSerialReader
* Java voice reporting cleanups.
* Force java source encoding to UTF-8
* Make ao_log_data re-entrant as it is used for both sensor and GPS
logs
* altosui: Catch errors opening USB devices. Limit list to relevant
devices
* Make voice and channel menus work.
* Add voice test command for help in adjusting volume.
* Remove debug printf
* altosui: Add eeprom data capture function. No UI yet.
* altosui: Add progress bar for eeprom downloading status
* altosui: Fix Save flight data monitor layout, add cancel
* altosui: Replace device dialog. Center eeprom monitor.
* altosui: report rocket ground bearing at landing only if known
* Reset GPS ready status when GPS comes unlocked on the pad
altos (0.6+236+gcd8aa79) unstable; urgency=low
[ Keith Packard ]
* Telemetry code was mis-computing RSSI
* Switch DBG pins to GPIO when using any debug commands. Reboot to
restore.
[ Bdale Garbee ]
* significant documentation update
* add build dep for sndfile
* reflect documentation file name change
* update to latest Debian standards version
altos (0.6+224+g4766b13) unstable; urgency=low
[ Bdale Garbee ]
* documentation updates from Bob
[ Mike Beattie ]
* Extension to KML output format, and minor bug fix
[ Keith Packard ]
* ao-view: disable radio telemetry monitoring during channel change
* Add special code for USB panic's.
* ao-postflight: was walking off state.data array
* Abort any in-progress radio operation when changing radio channel
altos (0.6+214+g16c4cae) unstable; urgency=low
[ Bdale Garbee ]
* updates including a typo fix from Bob Finch to the PKGBUILD-git.altos
* merge a derivative of Bob Finch's mere mortals guide as getting started
* merge the altusmetrum-themes package
[ Keith Packard ]
* Fix telemetrum.inf, tested by Adrian and Keithp
* Finish basic flight monitoring UI with voice using FreeTTS
altos (0.6+204+g6bd8513) unstable; urgency=low
* lose the quotes since they apparently aren't necessary
altos (0.6+202+gae6854d) unstable; urgency=low
* update desktop file for conformance with current standards
altos (0.6+200+g68eaaa6) unstable; urgency=low
* add initial package build scripts for Arch Linux from Bob Finch
* add desktop file provided by Bob Finch
altos (0.6+195+gcde60f1) unstable; urgency=low
* Revert "Merge remote branch 'remotes/origin/fix-reset'"
altos (0.6+193+g314d27a) unstable; urgency=low
[ Keith Packard ]
* Don't change dbg clock while changing reset_n. Use 20ms everywhere
altos (0.6+190+g8b6767e) unstable; urgency=low
[ Keith Packard ]
* Fix all stdio reading functions to be __critical
* Use ao_delay to sleep for 2 seconds instead of trying ao_sleep
altos (0.6+187+g8702f49) unstable; urgency=low
[ Bdale Garbee ]
* more text created during SFO->DEN flight
* initial attempt at a telemetrum turn on script .. needs work
[ Keith Packard ]
* Revert "Add optional 's' command to packet slave to enable/disable
slave mode"
* Disable interrupts while reading from stdin
altos (0.6+180+g99094f0) unstable; urgency=low
[ Keith Packard ]
* Increase reset switch time to 100ms
* Add optional 's' command to packet slave to enable/disable slave
mode
* More ALtosUI changes
* Autodetect flite voice registration function
[ Bdale Garbee ]
* capture work done on SFO->DEN flight
* add some RF usage information from an email reply sent today, and
re-indent
altos (0.6+171+g9394393) unstable; urgency=low
[ Bdale Garbee ]
* wrong Yaesu model
[ Keith Packard ]
* Only have the slave return a packet if it received one.
altos (0.6+168+gc0ee1ae) unstable; urgency=low
[ Bdale Garbee ]
* INSTALL file changed by auto tools
[ Keith Packard ]
* libflite may forget to reference libasound
altos (0.6+164+g5c3b6e2) unstable; urgency=low
[ Keith Packard ]
* Start adding java-based UI
* Add telemetry data parsing code
* Add Windows install .inf file
* Fix windows install file
* Add telem parsing code
* Steal C code from ao-view
* Display table of flight info. gps is not working yet though
* Fix up table formatting
* Fix status update
* Fix state updates
* Clean up GPS data formatting
* Report current gps nsat, not last locked nsat
* Remove GPS data missing from skytraq. Save max height/accel/speed
* Remove unused cell renderer class
* Make .jar file
* Use RXTX for serial comm. Add logdir preference saving
* Make ao_radio_idle keep trying to get the radio to idle.
* Don't abort the radio when enabling telemetry monitoring
* Clean up some altosui comments
* Switch TeleMetrum from v0.2 to v1.0
* Add Linux device discovery
* Interrupt running replay thread when starting another replay
* serial port read function cannot be interrupted. poll every 1 second
* TD reports "not-connected" when GPS has 0 sats
* Tasks may move in task structure as a result of ao_exit
* Enable telemetry monitoring
* Use 16-bit flite voice (which appears to have changed symbols
recently)
* When changing RESET line, delay 20ms
[ Bdale Garbee ]
* choose a better set of docbook xsl files
altos (0.6+131+g6629ec5) unstable; urgency=low
* lose the url entirely for now
altos (0.6+129+g934434f) unstable; urgency=low
* fix typo in url
altos (0.6+127+g05ad583) unstable; urgency=low
* need another build dep
altos (0.6+125+g8f1d47e) unstable; urgency=low
* make lintian happy
* tweak copyright assertion
* crudely incorporate "day in the life" info from web page
* rewrite urls in docbook format
altos (0.6+119+g00f49c8) unstable; urgency=low
[ Bdale Garbee ]
* update changelogs for Debian build
* move gbp.conf into debian/
* initial harness for documentation
* fix typo
[ Keith Packard ]
* Round radio calibration value instead of truncating
* Document the ao-dumplog '--remote' flag for radio-link downloads
altos (0.6+108+g6e61170) unstable; urgency=low
[ Keith Packard ]
* Need to duplicate new altitude conversion code in aoview.
altos (0.6+106+ga1478f6) unstable; urgency=low
[ Keith Packard ]
* Add ao_radio_xmit to help test boards without flashing them.
* Allow product names to have suffixes (like board revisions)
* Fix and document the ao-rawload --run flag
* Add LED test
* Leave .ihx files in the build directory too - easier to debug that way
* Eliminate deadlock when writing config from radio link
* Fix up LED colors for each product.
* Add .gitignore for ao-bringup
[ Bdale Garbee ]
* create a turn on script for lighting up TeleDongle v0.2 boards
altos (0.6+95+g2f45953) unstable; urgency=low
* update changelogs for Debian build
* conditionalize use of git on executability of /usr/bin/git binary
altos (0.6+88+gdeccc10) unstable; urgency=low
* add gawk as a build dependency since strtonum is a gawk extension
altos (0.6+86+g2491282) unstable; urgency=low
[ Keith Packard ]
* Disable monitor mode before attempting radio test.
* Ensure that ao_alarm waits at least the specified time
* Remove dbg driver code from telemetrum/teledongle
* Add AT45DBxx1D driver
* Remove green LED and temp sensor from v0.2 code
* Add at45db161d.h header file for new flash part.
* Add 'f' command to display flash status register contents
* Dump more flash parameters for the flash_status command
* Dump config block from read/write config and flash_status commands
* Don't set ao_flash_setup_done until we're actually done.
* Remove flash debugging printfs
* Add simple gps dump command 'g'
* Force idle mode by shorting the SPI clock to ground at boot time.
* Switch to using internal cc1111 temperature sensor
* Missing ao_mutex_put in gps_dump
* Compute daytime using GPS as time base
* Pull in a bit more data for filtering the start of the boost
* Log GPS data on pad after boost detect.
* Change barometer conversion code to shrink conversion table
* Change altos build process to support per-product compile-time
changes
* Update .gitignore files
* Quiet make output.
* Add back stack size checking to altos linking phase
* Must install .map files for ao-load to work
altos (0.6+60+g10d1bbc) unstable; urgency=low
[ Keith Packard ]
* Use ao_radio_get/ao_radio_put in packet code.
altos (0.6+58+gbbb152c) unstable; urgency=low
[ Keith Packard ]
* Re-order config values. Change frequency to cal
* Allow radio calibration to be set from ao-load
* Add --cal to man page
altos (0.6+53+gcd49847) unstable; urgency=low
[ Keith Packard ]
* Remove send_serial and serial_baud commands.
* Make ao_cmd_decimal produce both 32 and 16 bit values.
* Add radio calibration configuration.
altos (0.6+49+g9a1d7dd) unstable; urgency=low
[ Keith Packard ]
* Change default callsign to "N0CALL"
altos (0.6+47+g4053309) unstable; urgency=low
* fix absolute path in debian/dirs, add Suggests for slim-altusmetrum
* change home URL in control file to be the AltOS page
altos (0.6+43+gd6ba07e) unstable; urgency=low
[ Keith Packard ]
* Decode HDOP data from skytraq GPS
* Document ao-postflight --gps and --kml options.
* Make ao-postflight create filenames using input filenames.
* Make TD print 0000-00-00 for invalid dates.
* Fix --plot arg handling. Add -all option.
* Convert telemetry file GPS satellite information in cc_log_read
* Don't crash if --plot isn't passed on ao-postflight command line
* ao-postflight: compute barometric alt for each GPS position
* ao-postflight: don't try to use missing gps sat data
* Automatically extract flight number for eeprom and telem filenames.
altos (0.6+32+g87e6f3e) unstable; urgency=low
[ Bdale Garbee ]
* fix typo in comment
[ Keith Packard ]
* Reduce igniter firing time from 500ms to 50ms.
* Add GPS date/time output to ao-postflight.
* Eliminate SiRF state values from ao-view.
altos (0.6+27+gb0d7e3f) unstable; urgency=low
[ Keith Packard ]
* Add two-point accelerometer calibration.
* Remove "l" command as ao-dumplong no longer uses it
* Remove "d" command
* Remove "f" command
* Reformat ADC values to show all 16 bits
* ao_flight_test was using accel value for pressure too
* Pass accel calibration over telemetry stream. Telemetry data format
change.
* Add ability to dump eeprom data over radio link.
* In packet master, move USB flush from packet thread to echo thread
* In USB pollchar, wait for packet before re-checking USB out len
* Explicitly use USB I/O routines in packet code
* Flush pending input when switching to remote packet mode
* Stop recording in ao-dumplog after receiving an invalid block
* Move ao_match_word from ao_ignite.c to ao_cmd.c
* Add Watchdog Timer Control register definitions
* Add reboot command.
* Return radio to telemetry settings when packet system closed.
* ao-postflight: fix sloppy gps sat data realloc code (was crashing).
* Loosen tolerances for main->landed transition
* Provide a dummy 'uninstall' target in the src directory.
* Share telemetry parsing code in cc library.
* Enable telemetry receive in ao_view
* Switch order of serial/flight in ao-postflight summary
* Add flight number to telemetry stream.
* Add date to GPS data, captured from GPRMC packet.
* Stop using SiRF state info.
altos (0.6) unstable; urgency=low
[ Keith Packard ]
* Add support for the SkyTraq GPS unit
* Build two versions of TM, one for SiRF, one for SkyTraq
* Save some DSEG space by marking cmd functions __reentrant
* Add ao_wake_task and ao_exit
* Add keyhole-markup generation for ao-postflight.
* Initial packet bits. Just testing transmission
* Add radio carrier command
* Wait for TX to finish sending data
* Add ao_alarm
* Remove reason from ao_dma_abort
* Switch packet code from timer thread to ao_alarm
* Use ao_radio_done to wait for TX to completely finish with packet
* Send SYN packet to set sequence numbers
* Add RFIM register
* Do more flushing in packet test code
* Use ao_alarm for ao_delay so it can be easily interrupted
* Poke master to speed up packet rate when things are busy
* No need to wakeup &ao_tick_count now
* Enable packet-based communcation to command processor
* Add more docs to the README file
* Disable interrupts while removing tasks from task list
* Add ao_usb_pollchar to ao.h
altos (0.5+90+g127c312) unstable; urgency=low
* de-version the libreadline-dev build dependency
altos (0.5+86+g2de548f) unstable; urgency=low
* automate push of updated and tagged master branch during
debian/rules prebuild
* flush repetitive junk out of debian/changelog, and update the
prebuild target
* add support for tagging git repository on each Debian package build
altos (0.5+77+gc57bd7f) unstable; urgency=low
* build for Debian from git
-- Ubuntu Archive Auto-Sync <email address hidden> Mon, 17 Oct 2011 14:19:04 +0000
