Welcome to PulseAudio! Use "help" for usage information.
>>> 1 sink(s) available.
  * index: 0
	name: <alsa_output.pci-0000_00_04.0.analog-stereo>
	driver: <module-alsa-card.c>
	flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: RUNNING
	suspend cause: 
	priority: 9959
	volume: 0:  92% 1:  92%
	        0: -2.25 dB 1: -2.25 dB
	        balance 0.00
	base volume:  63%
	             -12.00 dB
	volume steps: 65537
	muted: no
	current latency: 15.05 ms
	max request: 3 KiB
	max rewind: 64 KiB
	monitor source: 0
	sample spec: s16le 2ch 48000Hz
	channel map: front-left,front-right
	             Stereo
	used by: 1
	linked by: 33
	configured latency: 20.00 ms; range is 0.50 .. 341.33 ms
	card: 0 <alsa_card.pci-0000_00_04.0>
	module: 4
	properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "NVidia CK804"
		alsa.id = "Intel ICH"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "0"
		alsa.card = "0"
		alsa.card_name = "NVidia CK804"
		alsa.long_card_name = "NVidia CK804 with ALC850 at irq 22"
		alsa.driver_name = "snd_intel8x0"
		device.bus_path = "pci-0000:00:04.0"
		sysfs.path = "/devices/pci0000:00/0000:00:04.0/sound/card0"
		device.bus = "pci"
		device.vendor.id = "10de"
		device.vendor.name = "nVidia Corporation"
		device.product.id = "0059"
		device.product.name = "CK804 AC'97 Audio Controller"
		device.form_factor = "internal"
		device.string = "front:0"
		device.buffering.buffer_size = "65536"
		device.buffering.fragment_size = "65536"
		device.access_mode = "mmap+timer"
		device.profile.name = "analog-stereo"
		device.profile.description = "Analogue Stereo"
		device.description = "Internal Audio Analogue Stereo"
		alsa.mixer_name = "Realtek ALC850 rev 0"
		alsa.components = "AC97a:414c4790"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	ports:
		analog-output;output-amplifier-on: Analogue Output / Amplifier (priority 9910, available: unknown)
		analog-output;output-amplifier-off: Analogue Output / No Amplifier (priority 9900, available: unknown)
		analog-output-lfe-on-mono;output-amplifier-on: Analogue Output (LFE) / Amplifier (priority 4010, available: unknown)
		analog-output-lfe-on-mono;output-amplifier-off: Analogue Output (LFE) / No Amplifier (priority 4000, available: unknown)
	active port: <analog-output;output-amplifier-on>
>>>