[ 5.151241] brcm80211 0000:02:00.0: setting latency timer to 64 [ 5.246536] eeepc_wmi: Backlight controlled by ACPI video driver [ 5.265922] Found chip type AI (0x13814313) [ 5.269076] Changing max_res_mask to 0xffff [ 5.269079] Changing min_res_mask to 0x200d [ 5.275152] Applying 4313 WARs [ 5.276074] wlc_bmac_attach:: deviceid 0x4727 nbands 1 board 0x2047 macaddr: 48:5d:60:2b:23:9b [ 5.282005] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 5.282011] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 5.282014] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 5.282018] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 5.282021] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 5.282024] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 5.282027] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 5.282030] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 5.282033] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 5.282036] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 5.282038] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 5.282041] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 5.282044] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 5.282047] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 5.282050] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 5.282053] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 5.282056] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 5.282059] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 5.282061] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 5.282064] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 5.282067] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 5.282070] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 5.282073] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule: [ 5.282076] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm) [ 5.282079] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule: [ 5.282082] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm) [ 5.282085] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule: [ 5.282088] cfg80211: 2474000 KHz - 2494000 KHz @ KHz), (300 mBi, 2000 mBm) [ 5.357334] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 5.360336] wl_set_hint: Sending country code US to MAC80211 [ 5.360343] wl0: Broadcom BCM43xx 802.11 MAC80211 Driver (1.82.8.0) (Compiled at 04:45:00 on Apr 11 2011) [ 5.360353] cfg80211: Calling CRDA for country: US [ 5.368554] lib80211: common routines for IEEE802.11 drivers [ 5.368559] lib80211_crypt: registered algorithm 'NULL' [ 5.467179] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 5.467185] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 5.467189] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 5.467192] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 5.467195] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 5.467198] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 5.467201] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 5.467204] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 5.467207] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 5.467210] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 5.467213] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 5.467216] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 5.467218] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 5.467221] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 5.467224] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 5.467227] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 5.467230] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 5.467233] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 5.467236] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 5.467239] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 5.467241] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 5.467245] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 5.467247] cfg80211: Disabling freq 2467 MHz [ 5.467249] cfg80211: Disabling freq 2472 MHz [ 5.467251] cfg80211: Disabling freq 2484 MHz [ 5.467254] cfg80211: Regulatory domain changed to country: US [ 5.467256] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 5.467260] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 5.467263] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 5.467266] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5.467269] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5.467272] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5.467275] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 5.474617] Synaptics Touchpad, model: 1, fw: 7.4, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0400 [ 5.546654] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input9 [ 5.700159] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0 [ 5.724084] [fglrx] Maximum main memory to use for locked dma buffers: 1643 MBytes. [ 5.724146] [fglrx] vendor: 1002 device: 9712 count: 1 [ 5.724487] [fglrx] ioport: bar 1, base 0xd000, size: 0x100 [ 5.724504] pci 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 5.724510] pci 0000:01:05.0: setting latency timer to 64 [ 5.724847] [fglrx] Kernel PAT support is enabled [ 5.724873] [fglrx] module loaded - fglrx 8.84.60 [Mar 24 2011] with 1 minors [ 5.765606] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 5.769780] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 5.828290] hda_codec: ALC269VB: BIOS auto-probing. [ 5.858906] input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input10 [ 5.859971] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input11 [ 5.860721] HDA Intel 0000:01:05.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 5.860763] HDA Intel 0000:01:05.1: setting latency timer to 64 [ 6.056927] vesafb: framebuffer at 0xd0000000, mapped to 0xf9c80000, using 3072k, total 3072k [ 6.056932] vesafb: mode is 1024x768x32, linelength=4096, pages=0 [ 6.056935] vesafb: scrolling: redraw [ 6.056939] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 [ 6.057144] Console: switching to colour frame buffer device 128x48 [ 6.057173] fb0: VESA VGA frame buffer device [ 6.078947] ppdev: user-space parallel port driver [ 6.120074] audit_printk_skb: 12 callbacks suppressed [ 6.120078] type=1400 audit(1303594486.159:15): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1114 comm="apparmor_parser" [ 6.135090] type=1400 audit(1303594486.171:16): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1114 comm="apparmor_parser" [ 6.365131] [fglrx] GART Table is not in FRAME_BUFFER range [ 6.365384] [fglrx] Could not enable MSI; System prevented initialization [ 6.366162] [fglrx] Firegl kernel thread PID: 1193 [ 6.366214] [fglrx] Firegl kernel thread PID: 1194 [ 6.366263] [fglrx] Firegl kernel thread PID: 1195 [ 6.366589] [fglrx] IRQ 18 Enabled [ 6.631093] [fglrx] Gart USWC size:552 M. [ 6.631097] [fglrx] Gart cacheable size:215 M. [ 6.631103] [fglrx] Reserved FB block: Shared offset:0, size:1000000 [ 6.631107] [fglrx] Reserved FB block: Unshared offset:fffb000, size:5000 [ 9.281474] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0 [ 9.860714] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj. [ 18.389486] hda-intel: azx_get_response timeout, switching to polling mode: last cmd=0x002a0000 [ 19.353171] wlan0: authenticate with 00:13:46:19:8a:2a (try 1) [ 19.355283] wlan0: authenticated [ 19.355309] wlan0: associate with 00:13:46:19:8a:2a (try 1) [ 19.357843] wlan0: RX AssocResp from 00:13:46:19:8a:2a (capab=0x431 status=0 aid=2) [ 19.357847] wlan0: associated [ 19.358586] Associated: True [ 19.358974] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 19.392016] hda_intel: azx_get_response timeout, switching to single_cmd mode: last cmd=0x002a0000 [ 29.552100] wlan0: no IPv6 routers present [ 55.816916] exe (1833): /proc/1833/oom_adj is deprecated, please use /proc/1833/oom_score_adj instead. [ 676.809326] Associated: False [ 676.809467] wlan0: deauthenticating from 00:13:46:19:8a:2a by local choice (reason=3) [ 676.811213] cfg80211: All devices are disconnected, going to restore regulatory settings [ 676.811232] cfg80211: Restoring regulatory settings [ 676.811237] cfg80211: Calling CRDA to update world regulatory domain [ 676.865746] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 676.865766] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 676.865784] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 676.865788] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 676.865805] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 676.865809] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 676.865826] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 676.865829] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 676.865831] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 676.865849] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 676.865852] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 676.865869] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 676.865872] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 676.865890] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 676.865892] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 676.865910] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 676.865913] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 676.865930] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 676.865933] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 676.865951] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 676.865953] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 676.865956] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 676.865974] cfg80211: Disabling freq 2467 MHz [ 676.865976] cfg80211: Disabling freq 2472 MHz [ 676.865978] cfg80211: Disabling freq 2484 MHz [ 676.865981] cfg80211: World regulatory domain updated: [ 676.865983] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 676.865986] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 676.865990] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 676.865993] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 676.865996] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 676.866013] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 677.988939] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0 [ 681.245521] PM: Syncing filesystems ... done. [ 681.252043] PM: Preparing system for mem sleep [ 681.252054] Freezing user space processes ... (elapsed 0.01 seconds) done. [ 681.268158] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [ 681.284151] PM: Entering mem sleep [ 681.284190] Suspending console(s) (use no_console_suspend to debug) [ 681.285458] sd 2:0:0:0: [sda] Synchronizing SCSI cache [ 681.307610] sd 2:0:0:0: [sda] Stopping disk [ 681.385002] brcm80211 0000:02:00.0: PCI INT A disabled [ 681.385192] [fglrx] IRQ 18 Disabled [ 681.385209] [fglrx] Preparing suspend fglrx in kernel. [ 681.423386] ehci_hcd 0000:00:13.2: PCI INT B disabled [ 681.423401] ohci_hcd 0000:00:13.1: PCI INT A disabled [ 681.423414] ohci_hcd 0000:00:13.0: PCI INT A disabled [ 681.423435] ehci_hcd 0000:00:12.2: PCI INT B disabled [ 681.423447] ohci_hcd 0000:00:12.1: PCI INT A disabled [ 681.423459] ohci_hcd 0000:00:12.0: PCI INT A disabled [ 681.423588] ahci 0000:00:11.0: PCI INT A disabled [ 681.423955] [fglrx] Suspending fglrx in kernel completed. [ 681.423960] [fglrx] Power down the ASIC . [ 681.424054] fglrx_pci 0000:01:05.0: PCI INT A disabled [ 681.488183] HDA Intel 0000:01:05.1: PCI INT B disabled [ 681.488202] ACPI handle has no context! [ 681.504096] PM: suspend of drv:HDA Intel dev:0000:01:05.1 complete after 119.073 msecs [ 681.524152] HDA Intel 0000:00:14.2: PCI INT A disabled [ 681.540097] PM: suspend of drv:HDA Intel dev:0000:00:14.2 complete after 117.676 msecs [ 681.540118] PM: suspend of drv: dev:pci0000:00 complete after 116.498 msecs [ 681.540124] PM: suspend of devices complete after 255.727 msecs [ 681.540127] PM: suspend devices took 0.256 seconds [ 681.540327] atl1c 0000:03:00.0: PME# enabled [ 681.540341] atl1c 0000:03:00.0: wake-up capability enabled by ACPI [ 681.588321] PM: late suspend of devices complete after 48.184 msecs [ 681.588431] ACPI: Preparing to enter system sleep state S3 [ 681.636597] PM: Saving platform NVS memory [ 681.637068] Disabling non-boot CPUs ... [ 681.637172] Extended CMOS year: 2000 [ 681.637172] Back to C! [ 681.637172] PM: Restoring platform NVS memory [ 681.637172] Extended CMOS year: 2000 [ 681.637172] ACPI: Waking up from system sleep state S3 [ 681.704341] pcieport 0000:00:04.0: restoring config space at offset 0x7 (was 0x1f1, writing 0x200001f1) [ 681.704350] pcieport 0000:00:04.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100506) [ 681.704387] pcieport 0000:00:05.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [ 681.704466] ahci 0000:00:11.0: restoring config space at offset 0x2 (was 0x1018f00, writing 0x1060100) [ 681.704490] ahci 0000:00:11.0: set SATA to AHCI mode [ 681.720102] ehci_hcd 0000:00:12.2: BAR 0: set to [mem 0xfbbff800-0xfbbff8ff] (PCI address [0xfbbff800-0xfbbff8ff]) [ 681.720139] ehci_hcd 0000:00:12.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00112) [ 681.736100] ehci_hcd 0000:00:13.2: BAR 0: set to [mem 0xfbbff400-0xfbbff4ff] (PCI address [0xfbbff400-0xfbbff4ff]) [ 681.736137] ehci_hcd 0000:00:13.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00112) [ 681.736211] pata_atiixp 0000:00:14.1: restoring config space at offset 0x3 (was 0x0, writing 0x4000) [ 681.736234] HDA Intel 0000:00:14.2: restoring config space at offset 0xf (was 0x10a, writing 0xa) [ 681.736257] HDA Intel 0000:00:14.2: restoring config space at offset 0x1 (was 0x4100006, writing 0x4100002) [ 681.736358] fglrx_pci 0000:01:05.0: restoring config space at offset 0xf (was 0x1ff, writing 0x107) [ 681.736370] fglrx_pci 0000:01:05.0: restoring config space at offset 0x3 (was 0x800000, writing 0x800010) [ 681.736375] fglrx_pci 0000:01:05.0: restoring config space at offset 0x1 (was 0x40100107, writing 0x100103) [ 681.736390] HDA Intel 0000:01:05.1: restoring config space at offset 0xf (was 0x2ff, writing 0x20a) [ 681.736401] HDA Intel 0000:01:05.1: restoring config space at offset 0x4 (was 0x0, writing 0xfbde8000) [ 681.736406] HDA Intel 0000:01:05.1: restoring config space at offset 0x3 (was 0x800000, writing 0x800010) [ 681.736411] HDA Intel 0000:01:05.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100103) [ 681.736486] brcm80211 0000:02:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 681.736548] atl1c 0000:03:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 681.736693] PM: early resume of devices complete after 32.450 msecs [ 681.736916] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 681.736982] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 681.737003] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 681.737115] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 681.737134] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 681.737153] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 681.737414] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 681.738329] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 681.738378] fglrx_pci 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 681.738382] fglrx_pci 0000:01:05.0: setting latency timer to 64 [ 681.741747] [fglrx] Power up the ASIC [ 681.741777] [fglrx] Preparing resume fglrx in kernel. [ 681.779180] HDA Intel 0000:01:05.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 681.779184] HDA Intel 0000:01:05.1: setting latency timer to 64 [ 681.779230] brcm80211 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 681.779236] brcm80211 0000:02:00.0: setting latency timer to 64 [ 681.779248] atl1c 0000:03:00.0: wake-up capability disabled by ACPI [ 681.779254] atl1c 0000:03:00.0: PME# disabled [ 681.780941] [fglrx] Resuming fglrx in kernel completed. [ 681.781129] [fglrx] IRQ 18 Enabled [ 681.781574] sd 2:0:0:0: [sda] Starting disk [ 681.888149] PM: resume of drv:atl1c dev:0000:03:00.0 complete after 108.893 msecs [ 681.922918] PM: resume of drv:battery dev:PNP0C0A:00 complete after 185.599 msecs [ 681.924141] PM: resume of drv:usb dev:usb2 complete after 144.756 msecs [ 681.924157] PM: resume of drv:hub dev:2-0:1.0 complete after 143.014 msecs [ 681.924164] PM: resume of drv: dev:ep_00 complete after 142.954 msecs [ 681.924178] PM: resume of drv: dev:ep_81 complete after 142.984 msecs [ 681.976189] PM: resume of drv:usb dev:usb6 complete after 194.679 msecs [ 681.976202] PM: resume of drv:hub dev:6-0:1.0 complete after 194.682 msecs [ 681.976209] PM: resume of drv: dev:ep_00 complete after 194.662 msecs [ 681.976214] PM: resume of drv: dev:ep_81 complete after 194.680 msecs [ 682.088143] ata6: SATA link down (SStatus 0 SControl 300) [ 682.088179] ata5: SATA link down (SStatus 0 SControl 300) [ 682.088232] ata4: SATA link down (SStatus 0 SControl 300) [ 682.204129] usb 3-1: reset low speed USB device using ohci_hcd and address 2 [ 682.260137] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 682.260733] ata3.00: configured for UDMA/100 [ 682.276237] PM: resume of drv:sd dev:2:0:0:0 complete after 494.658 msecs [ 682.276249] PM: resume of drv:scsi_device dev:2:0:0:0 complete after 494.639 msecs [ 682.276254] PM: resume of drv:scsi_disk dev:2:0:0:0 complete after 312.132 msecs [ 682.518308] PM: resume of drv:usb dev:3-1 complete after 736.577 msecs [ 682.518322] PM: resume of drv:usbhid dev:3-1:1.0 complete after 736.582 msecs [ 682.518332] PM: resume of drv: dev:ep_00 complete after 736.567 msecs [ 682.518336] PM: resume of drv: dev:ep_81 complete after 736.585 msecs [ 682.518342] PM: resume of drv:generic-usb dev:0003:046D:C03E.0001 complete after 242.077 msecs [ 682.620091] usb 2-3: reset high speed USB device using ehci_hcd and address 2 [ 683.369445] PM: resume of drv:usb dev:2-3 complete after 1587.819 msecs [ 683.369461] PM: resume of drv:uvcvideo dev:2-3:1.0 complete after 1587.825 msecs [ 683.369471] PM: resume of drv:uvcvideo dev:2-3:1.1 complete after 1587.809 msecs [ 683.369476] PM: resume of drv: dev:ep_00 complete after 1587.763 msecs [ 683.369481] PM: resume of drv: dev:ep_83 complete after 1587.832 msecs [ 683.369487] PM: resume of drv:video4linux dev:video0 complete after 851.113 msecs [ 683.369507] wl_ops_set_rts_threshold: Enter [ 683.369556] PM: resume of devices complete after 1632.768 msecs [ 683.369711] PM: resume devices took 1.632 seconds [ 683.369746] PM: Finishing wakeup. [ 683.369748] Restarting tasks ... done. [ 683.384813] video LNXVIDEO:00: Restoring backlight state [ 683.786680] atl1c 0000:03:00.0: irq 42 for MSI/MSI-X [ 683.868725] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 683.959120] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 685.228987] hda-intel: spurious response 0x0:0x0, last cmd=0x924011 [ 685.228993] hda-intel: spurious response 0x0:0x0, last cmd=0x924011 [ 685.228996] hda-intel: spurious response 0x0:0x0, last cmd=0x924011 [ 685.228999] hda-intel: spurious response 0x0:0x0, last cmd=0x924011 [ 685.229001] hda-intel: spurious response 0x0:0x0, last cmd=0x924011 [ 685.229003] hda-intel: spurious response 0x0:0x0, last cmd=0x924011 [ 685.229006] hda-intel: spurious response 0x0:0x0, last cmd=0x924011 [ 685.229008] hda-intel: spurious response 0x0:0x0, last cmd=0x924011 [ 685.229011] hda-intel: spurious response 0x0:0x0, last cmd=0x924011 [ 685.229013] hda-intel: spurious response 0x0:0x0, last cmd=0x924011 [ 685.229015] hda-intel: spurious response 0x0:0x0, last cmd=0x924011 [ 685.229018] hda-intel: spurious response 0x0:0x0, last cmd=0x924011 [ 685.229020] hda-intel: spurious response 0x0:0x0, last cmd=0x924011 [ 685.229022] hda-intel: spurious response 0x0:0x0, last cmd=0x924011 [ 685.229025] hda-intel: spurious response 0x0:0x0, last cmd=0x924011 [ 685.229027] hda-intel: spurious response 0x0:0x0, last cmd=0x924011 [ 685.229030] hda-intel: spurious response 0x0:0x0, last cmd=0x924011 [ 685.229032] hda-intel: spurious response 0x0:0x0, last cmd=0x924011 [ 685.229034] hda-intel: spurious response 0x0:0x0, last cmd=0x924011 [ 685.229037] hda-intel: spurious response 0x0:0x0, last cmd=0x924011 [ 685.229039] hda-intel: spurious response 0x0:0x0, last cmd=0x924011 [ 685.229041] hda-intel: spurious response 0x0:0x0, last cmd=0x924011 [ 685.229044] hda-intel: spurious response 0x0:0x0, last cmd=0x924011 [ 685.229046] hda-intel: spurious response 0x0:0x0, last cmd=0x924011 [ 685.229048] hda-intel: spurious response 0x0:0x0, last cmd=0x924011 [ 685.229051] hda-intel: spurious response 0x0:0x0, last cmd=0x924011 [ 685.229053] hda-intel: spurious response 0x0:0x0, last cmd=0x924011 [ 685.229055] hda-intel: spurious response 0x0:0x0, last cmd=0x924011 [ 685.229058] hda-intel: spurious response 0x0:0x0, last cmd=0x924011 [ 685.229060] hda-intel: spurious response 0x0:0x0, last cmd=0x924011 [ 685.229063] hda-intel: spurious response 0x0:0x0, last cmd=0x924011 [ 685.229065] hda-intel: spurious response 0x0:0x0, last cmd=0x924011 [ 685.229067] hda-intel: spurious response 0x0:0x0, last cmd=0x924011 [ 685.229070] hda-intel: spurious response 0x0:0x0, last cmd=0x924011 [ 685.229072] hda-intel: spurious response 0x0:0x0, last cmd=0x924011 [ 685.229074] hda-intel: spurious response 0x0:0x0, last cmd=0x924011 [ 685.229077] hda-intel: spurious response 0x0:0x0, last cmd=0x924011 [ 685.229079] hda-intel: spurious response 0x0:0x0, last cmd=0x924011 [ 685.229082] hda-intel: spurious response 0x0:0x0, last cmd=0x924011 [ 685.229084] hda-intel: spurious response 0x0:0x0, last cmd=0x924011 [ 685.229086] hda-intel: spurious response 0x0:0x0, last cmd=0x924011 [ 685.229089] hda-intel: spurious response 0x0:0x0, last cmd=0x924011 [ 685.229091] hda-intel: spurious response 0x0:0x0, last cmd=0x924011 [ 685.229093] hda-intel: spurious response 0x0:0x0, last cmd=0x924011 [ 685.229096] hda-intel: spurious response 0x0:0x0, last cmd=0x924011 [ 685.229098] hda-intel: spurious response 0x0:0x0, last cmd=0x924011 [ 685.229101] hda-intel: spurious response 0x0:0x0, last cmd=0x924011 [ 685.669915] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0 [ 685.758514] wlan0: authenticate with 00:13:46:19:8a:2a (try 1) [ 685.774448] wlan0: authenticated [ 685.774481] wlan0: associate with 00:13:46:19:8a:2a (try 1) [ 685.777291] wlan0: RX AssocResp from 00:13:46:19:8a:2a (capab=0x431 status=0 aid=2) [ 685.777295] wlan0: associated [ 685.778076] Associated: True [ 685.778461] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 696.288042] wlan0: no IPv6 routers present [ 2103.548020] Associated: False [ 2103.548057] wlan0: deauthenticating from 00:13:46:19:8a:2a by local choice (reason=3) [ 2103.553265] cfg80211: All devices are disconnected, going to restore regulatory settings [ 2103.553271] cfg80211: Restoring regulatory settings [ 2103.553280] cfg80211: Calling CRDA to update world regulatory domain [ 2103.557741] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 2103.557747] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 2103.557751] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 2103.557754] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 2103.557757] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 2103.557761] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 2103.557763] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 2103.557766] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 2103.557769] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 2103.557772] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 2103.557775] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 2103.557778] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 2103.557781] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 2103.557784] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 2103.557786] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 2103.557789] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 2103.557792] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 2103.557795] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 2103.557798] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 2103.557801] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 2103.557804] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 2103.557807] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 2103.557809] cfg80211: Disabling freq 2467 MHz [ 2103.557811] cfg80211: Disabling freq 2472 MHz [ 2103.557813] cfg80211: Disabling freq 2484 MHz [ 2103.557817] cfg80211: World regulatory domain updated: [ 2103.557819] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 2103.557822] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 2103.557825] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 2103.557828] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 2103.557831] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 2103.557834] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 2103.677388] [fglrx] IRQ 18 Disabled [ 2104.671750] [fglrx] GART Table is not in FRAME_BUFFER range [ 2104.672008] [fglrx] Could not enable MSI; System prevented initialization [ 2104.672893] [fglrx] Firegl kernel thread PID: 10381 [ 2104.672946] [fglrx] Firegl kernel thread PID: 10382 [ 2104.672995] [fglrx] Firegl kernel thread PID: 10383 [ 2104.673329] [fglrx] IRQ 18 Enabled [ 2104.900540] [fglrx] Gart USWC size:552 M. [ 2104.900546] [fglrx] Gart cacheable size:215 M. [ 2104.900552] [fglrx] Reserved FB block: Shared offset:0, size:1000000 [ 2104.900555] [fglrx] Reserved FB block: Unshared offset:fffb000, size:5000 [ 2115.888360] wlan0: authenticate with 00:13:46:19:8a:2a (try 1) [ 2115.890304] wlan0: authenticated [ 2115.890324] wlan0: associate with 00:13:46:19:8a:2a (try 1) [ 2115.897084] wlan0: RX AssocResp from 00:13:46:19:8a:2a (capab=0x431 status=0 aid=2) [ 2115.897089] wlan0: associated [ 2115.897834] Associated: True [ 5110.070423] process `skype' is using obsolete setsockopt SO_BSDCOMPAT [ 5184.716995] [fglrx] IRQ 18 Disabled [ 5184.734494] Associated: False [ 5184.734530] wlan0: deauthenticating from 00:13:46:19:8a:2a by local choice (reason=3) [ 5184.737139] cfg80211: All devices are disconnected, going to restore regulatory settings [ 5184.737146] cfg80211: Restoring regulatory settings [ 5184.737151] cfg80211: Calling CRDA to update world regulatory domain [ 5184.746373] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 5184.746380] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 5184.746383] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 5184.746387] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 5184.746390] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 5184.746393] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 5184.746396] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 5184.746399] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 5184.746402] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 5184.746405] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 5184.746407] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 5184.746410] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 5184.746413] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 5184.746416] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 5184.746419] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 5184.746422] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 5184.746425] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 5184.746428] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 5184.746430] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 5184.746434] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 5184.746436] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 5184.746439] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 5184.746442] cfg80211: Disabling freq 2467 MHz [ 5184.746444] cfg80211: Disabling freq 2472 MHz [ 5184.746446] cfg80211: Disabling freq 2484 MHz [ 5184.746449] cfg80211: World regulatory domain updated: [ 5184.746451] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 5184.746454] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5184.746458] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 5184.746461] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 5184.746464] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5184.746467] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5186.004073] [fglrx] GART Table is not in FRAME_BUFFER range [ 5186.004328] [fglrx] Could not enable MSI; System prevented initialization [ 5186.005050] [fglrx] Firegl kernel thread PID: 13747 [ 5186.005103] [fglrx] Firegl kernel thread PID: 13748 [ 5186.005151] [fglrx] Firegl kernel thread PID: 13749 [ 5186.005481] [fglrx] IRQ 18 Enabled [ 5186.239460] [fglrx] Gart USWC size:552 M. [ 5186.239465] [fglrx] Gart cacheable size:215 M. [ 5186.239487] [fglrx] Reserved FB block: Shared offset:0, size:1000000 [ 5186.239491] [fglrx] Reserved FB block: Unshared offset:fffb000, size:5000 [ 5202.964061] wlan0: authenticate with 00:13:46:19:8a:2a (try 1) [ 5202.967215] wlan0: authenticated [ 5202.967242] wlan0: associate with 00:13:46:19:8a:2a (try 1) [ 5202.970172] wlan0: RX AssocResp from 00:13:46:19:8a:2a (capab=0x431 status=0 aid=2) [ 5202.970177] wlan0: associated [ 5202.970928] Associated: True [ 5697.633837] Associated: False [ 5697.633875] wlan0: deauthenticating from 00:13:46:19:8a:2a by local choice (reason=3) [ 5697.635295] cfg80211: All devices are disconnected, going to restore regulatory settings [ 5697.635300] cfg80211: Restoring regulatory settings [ 5697.635304] cfg80211: Calling CRDA to update world regulatory domain [ 5697.639994] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 5697.640064] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 5697.640067] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 5697.640071] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 5697.640074] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 5697.640077] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 5697.640080] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 5697.640083] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 5697.640086] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 5697.640089] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 5697.640092] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 5697.640095] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 5697.640098] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 5697.640101] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 5697.640104] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 5697.640107] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 5697.640110] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 5697.640113] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 5697.640116] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 5697.640119] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 5697.640121] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 5697.640125] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 5697.640127] cfg80211: Disabling freq 2467 MHz [ 5697.640129] cfg80211: Disabling freq 2472 MHz [ 5697.640131] cfg80211: Disabling freq 2484 MHz [ 5697.640135] cfg80211: World regulatory domain updated: [ 5697.640137] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 5697.640140] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5697.640143] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 5697.640146] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 5697.640150] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5697.640153] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5698.798994] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0 [ 5701.349590] PM: Syncing filesystems ... done. [ 5701.371791] PM: Preparing system for mem sleep [ 5701.371807] Freezing user space processes ... (elapsed 0.01 seconds) done. [ 5701.388125] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [ 5701.404148] PM: Entering mem sleep [ 5701.404187] Suspending console(s) (use no_console_suspend to debug) [ 5701.405441] sd 2:0:0:0: [sda] Synchronizing SCSI cache [ 5701.406940] sd 2:0:0:0: [sda] Stopping disk [ 5701.482687] brcm80211 0000:02:00.0: PCI INT A disabled [ 5701.482877] [fglrx] IRQ 18 Disabled [ 5701.482895] [fglrx] Preparing suspend fglrx in kernel. [ 5701.520294] [fglrx] Suspending fglrx in kernel completed. [ 5701.520300] [fglrx] Power down the ASIC . [ 5701.520364] fglrx_pci 0000:01:05.0: PCI INT A disabled [ 5701.521312] ehci_hcd 0000:00:13.2: PCI INT B disabled [ 5701.521322] ohci_hcd 0000:00:13.1: PCI INT A disabled [ 5701.521332] ohci_hcd 0000:00:13.0: PCI INT A disabled [ 5701.521351] ehci_hcd 0000:00:12.2: PCI INT B disabled [ 5701.521361] ohci_hcd 0000:00:12.1: PCI INT A disabled [ 5701.521371] ohci_hcd 0000:00:12.0: PCI INT A disabled [ 5701.521592] ahci 0000:00:11.0: PCI INT A disabled [ 5701.584152] HDA Intel 0000:01:05.1: PCI INT B disabled [ 5701.584171] ACPI handle has no context! [ 5701.600091] PM: suspend of drv:HDA Intel dev:0000:01:05.1 complete after 117.381 msecs [ 5701.624145] HDA Intel 0000:00:14.2: PCI INT A disabled [ 5701.640095] PM: suspend of drv:HDA Intel dev:0000:00:14.2 complete after 119.671 msecs [ 5701.640115] PM: suspend of drv: dev:pci0000:00 complete after 118.513 msecs [ 5701.640122] PM: suspend of devices complete after 235.729 msecs [ 5701.640125] PM: suspend devices took 0.236 seconds [ 5701.640321] atl1c 0000:03:00.0: PME# enabled [ 5701.640335] atl1c 0000:03:00.0: wake-up capability enabled by ACPI [ 5701.688358] PM: late suspend of devices complete after 48.224 msecs [ 5701.688467] ACPI: Preparing to enter system sleep state S3 [ 5701.736602] PM: Saving platform NVS memory [ 5701.737062] Disabling non-boot CPUs ... [ 5701.737165] Extended CMOS year: 2000 [ 5701.737165] Back to C! [ 5701.737165] PM: Restoring platform NVS memory [ 5701.737165] Extended CMOS year: 2000 [ 5701.737165] ACPI: Waking up from system sleep state S3 [ 5701.804346] pcieport 0000:00:04.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100506) [ 5701.804384] pcieport 0000:00:05.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [ 5701.804464] ahci 0000:00:11.0: restoring config space at offset 0x2 (was 0x1018f00, writing 0x1060100) [ 5701.804488] ahci 0000:00:11.0: set SATA to AHCI mode [ 5701.820099] ehci_hcd 0000:00:12.2: BAR 0: set to [mem 0xfbbff800-0xfbbff8ff] (PCI address [0xfbbff800-0xfbbff8ff]) [ 5701.820136] ehci_hcd 0000:00:12.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00112) [ 5701.836099] ehci_hcd 0000:00:13.2: BAR 0: set to [mem 0xfbbff400-0xfbbff4ff] (PCI address [0xfbbff400-0xfbbff4ff]) [ 5701.836135] ehci_hcd 0000:00:13.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00112) [ 5701.836209] pata_atiixp 0000:00:14.1: restoring config space at offset 0x3 (was 0x0, writing 0x4000) [ 5701.836232] HDA Intel 0000:00:14.2: restoring config space at offset 0xf (was 0x10a, writing 0xa) [ 5701.836255] HDA Intel 0000:00:14.2: restoring config space at offset 0x1 (was 0x4100006, writing 0x4100002) [ 5701.836356] fglrx_pci 0000:01:05.0: restoring config space at offset 0xf (was 0x1ff, writing 0x107) [ 5701.836368] fglrx_pci 0000:01:05.0: restoring config space at offset 0x3 (was 0x800000, writing 0x800010) [ 5701.836373] fglrx_pci 0000:01:05.0: restoring config space at offset 0x1 (was 0x40100107, writing 0x40100103) [ 5701.836388] HDA Intel 0000:01:05.1: restoring config space at offset 0xf (was 0x2ff, writing 0x20a) [ 5701.836399] HDA Intel 0000:01:05.1: restoring config space at offset 0x4 (was 0x0, writing 0xfbde8000) [ 5701.836404] HDA Intel 0000:01:05.1: restoring config space at offset 0x3 (was 0x800000, writing 0x800010) [ 5701.836409] HDA Intel 0000:01:05.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100103) [ 5701.836484] brcm80211 0000:02:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 5701.836546] atl1c 0000:03:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 5701.836691] PM: early resume of devices complete after 32.445 msecs [ 5701.836913] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 5701.836979] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 5701.837018] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 5701.837131] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 5701.837150] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 5701.837169] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 5701.837213] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 5701.837443] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 5701.837490] fglrx_pci 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 5701.837494] fglrx_pci 0000:01:05.0: setting latency timer to 64 [ 5701.840854] [fglrx] Power up the ASIC [ 5701.840884] [fglrx] Preparing resume fglrx in kernel. [ 5701.878950] HDA Intel 0000:01:05.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 5701.878955] HDA Intel 0000:01:05.1: setting latency timer to 64 [ 5701.878999] brcm80211 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 5701.879004] brcm80211 0000:02:00.0: setting latency timer to 64 [ 5701.879016] atl1c 0000:03:00.0: wake-up capability disabled by ACPI [ 5701.879026] atl1c 0000:03:00.0: PME# disabled [ 5701.880783] [fglrx] Resuming fglrx in kernel completed. [ 5701.880971] [fglrx] IRQ 18 Enabled [ 5701.881359] sd 2:0:0:0: [sda] Starting disk [ 5701.988111] PM: resume of drv:atl1c dev:0000:03:00.0 complete after 109.089 msecs [ 5701.997970] PM: resume of drv:battery dev:PNP0C0A:00 complete after 160.635 msecs [ 5702.024147] PM: resume of drv:usb dev:usb1 complete after 145.056 msecs [ 5702.024174] PM: resume of drv:usb dev:usb2 complete after 145.024 msecs [ 5702.024184] PM: resume of drv:hub dev:1-0:1.0 complete after 145.093 msecs [ 5702.024191] PM: resume of drv: dev:ep_00 complete after 145.065 msecs [ 5702.024196] PM: resume of drv:hub dev:2-0:1.0 complete after 143.214 msecs [ 5702.024202] PM: resume of drv: dev:ep_00 complete after 143.163 msecs [ 5702.024216] PM: resume of drv: dev:ep_81 complete after 145.123 msecs [ 5702.024222] PM: resume of drv: dev:ep_81 complete after 143.219 msecs [ 5702.076056] PM: resume of drv:usb dev:usb6 complete after 194.755 msecs [ 5702.076071] PM: resume of drv:usb dev:usb3 complete after 195.017 msecs [ 5702.076081] PM: resume of drv:hub dev:6-0:1.0 complete after 194.772 msecs [ 5702.076088] PM: resume of drv: dev:ep_00 complete after 194.754 msecs [ 5702.076093] PM: resume of drv:hub dev:3-0:1.0 complete after 195.022 msecs [ 5702.076099] PM: resume of drv: dev:ep_00 complete after 195.001 msecs [ 5702.076114] PM: resume of drv:usb dev:3-1 complete after 194.642 msecs [ 5702.076121] PM: resume of drv: dev:ep_81 complete after 194.800 msecs [ 5702.076126] PM: resume of drv: dev:ep_81 complete after 195.041 msecs [ 5702.076141] PM: resume of drv:usbhid dev:3-1:1.0 complete after 194.656 msecs [ 5702.076147] PM: resume of drv: dev:ep_00 complete after 194.637 msecs [ 5702.076152] PM: resume of drv: dev:ep_81 complete after 194.656 msecs [ 5702.188105] ata5: SATA link down (SStatus 0 SControl 300) [ 5702.188165] ata4: SATA link down (SStatus 0 SControl 300) [ 5702.188194] ata6: SATA link down (SStatus 0 SControl 300) [ 5702.360104] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 5702.360691] ata3.00: configured for UDMA/100 [ 5702.376191] PM: resume of drv:sd dev:2:0:0:0 complete after 494.828 msecs [ 5702.376203] PM: resume of drv:scsi_device dev:2:0:0:0 complete after 494.808 msecs [ 5702.376308] PM: resume of drv:scsi_disk dev:2:0:0:0 complete after 360.495 msecs [ 5707.184137] usb 2-3: reset high speed USB device using ehci_hcd and address 2 [ 5707.933903] PM: resume of drv:usb dev:2-3 complete after 6052.491 msecs [ 5707.933918] PM: resume of drv:uvcvideo dev:2-3:1.0 complete after 6052.497 msecs [ 5707.933928] PM: resume of drv:uvcvideo dev:2-3:1.1 complete after 6052.481 msecs [ 5707.933933] PM: resume of drv: dev:ep_00 complete after 6052.474 msecs [ 5707.933938] PM: resume of drv: dev:ep_83 complete after 6052.504 msecs [ 5707.933944] PM: resume of drv:video4linux dev:video0 complete after 5557.592 msecs [ 5707.933965] wl_ops_set_rts_threshold: Enter [ 5707.934014] PM: resume of devices complete after 6097.229 msecs [ 5707.934169] PM: resume devices took 6.096 seconds [ 5707.934206] PM: Finishing wakeup. [ 5707.934207] Restarting tasks ... [ 5707.934662] usb 3-1: USB disconnect, address 2 [ 5707.951727] done. [ 5707.951737] video LNXVIDEO:00: Restoring backlight state [ 5708.384348] atl1c 0000:03:00.0: irq 42 for MSI/MSI-X [ 5708.468729] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 5708.538874] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 5710.247429] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=600 [ 5710.754363] wlan0: authenticate with 00:13:46:19:8a:2a (try 1) [ 5710.755974] wlan0: authenticated [ 5710.756066] wlan0: associate with 00:13:46:19:8a:2a (try 1) [ 5710.760117] wlan0: RX AssocResp from 00:13:46:19:8a:2a (capab=0x431 status=0 aid=2) [ 5710.760122] wlan0: associated [ 5710.760857] Associated: True [ 5710.761266] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 5711.741794] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=600 [ 5712.602143] unity-2d-panel[13912]: segfault at 2107f4 ip 07f0dcc3 sp bfaecfa0 error 7 in libdbusmenu-glib.so.3.0.14[7eff000+15000] [ 5721.176210] wlan0: no IPv6 routers present [ 6563.205779] Associated: False [ 6563.205828] wlan0: deauthenticating from 00:13:46:19:8a:2a by local choice (reason=3) [ 6563.206339] cfg80211: All devices are disconnected, going to restore regulatory settings [ 6563.206343] cfg80211: Restoring regulatory settings [ 6563.206348] cfg80211: Calling CRDA to update world regulatory domain [ 6563.218075] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 6563.218082] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 6563.218086] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 6563.218089] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 6563.218092] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 6563.218095] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 6563.218098] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 6563.218101] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 6563.218104] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 6563.218107] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 6563.218110] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 6563.218113] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 6563.218115] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 6563.218119] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 6563.218121] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 6563.218124] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 6563.218127] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 6563.218130] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 6563.218133] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 6563.218136] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 6563.218138] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 6563.218142] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 6563.218144] cfg80211: Disabling freq 2467 MHz [ 6563.218146] cfg80211: Disabling freq 2472 MHz [ 6563.218148] cfg80211: Disabling freq 2484 MHz [ 6563.218151] cfg80211: World regulatory domain updated: [ 6563.218153] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 6563.218157] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 6563.218160] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 6563.218163] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 6563.218166] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 6563.218169] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 6564.473287] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0 [ 6566.891022] PM: Syncing filesystems ... done. [ 6566.948753] PM: Preparing system for mem sleep [ 6566.948768] Freezing user space processes ... (elapsed 0.01 seconds) done. [ 6566.964155] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [ 6566.980147] PM: Entering mem sleep [ 6566.980188] Suspending console(s) (use no_console_suspend to debug) [ 6566.981409] sd 2:0:0:0: [sda] Synchronizing SCSI cache [ 6566.996730] sd 2:0:0:0: [sda] Stopping disk [ 6567.057229] brcm80211 0000:02:00.0: PCI INT A disabled [ 6567.057250] HDA Intel 0000:01:05.1: PCI INT B disabled [ 6567.057267] ACPI handle has no context! [ 6567.057403] [fglrx] IRQ 18 Disabled [ 6567.057420] [fglrx] Preparing suspend fglrx in kernel. [ 6567.096457] [fglrx] Suspending fglrx in kernel completed. [ 6567.096462] [fglrx] Power down the ASIC . [ 6567.096526] fglrx_pci 0000:01:05.0: PCI INT A disabled [ 6567.096695] ehci_hcd 0000:00:13.2: PCI INT B disabled [ 6567.096708] ohci_hcd 0000:00:13.1: PCI INT A disabled [ 6567.096720] ohci_hcd 0000:00:13.0: PCI INT A disabled [ 6567.096742] ehci_hcd 0000:00:12.2: PCI INT B disabled [ 6567.096755] ohci_hcd 0000:00:12.1: PCI INT A disabled [ 6567.096766] ohci_hcd 0000:00:12.0: PCI INT A disabled [ 6567.096896] ahci 0000:00:11.0: PCI INT A disabled [ 6567.200200] HDA Intel 0000:00:14.2: PCI INT A disabled [ 6567.216093] PM: suspend of drv:HDA Intel dev:0000:00:14.2 complete after 120.623 msecs [ 6567.216112] PM: suspend of drv: dev:pci0000:00 complete after 119.191 msecs [ 6567.216120] PM: suspend of devices complete after 235.728 msecs [ 6567.216123] PM: suspend devices took 0.236 seconds [ 6567.216326] atl1c 0000:03:00.0: PME# enabled [ 6567.216338] atl1c 0000:03:00.0: wake-up capability enabled by ACPI [ 6567.264282] PM: late suspend of devices complete after 48.151 msecs [ 6567.264393] ACPI: Preparing to enter system sleep state S3 [ 6567.312596] PM: Saving platform NVS memory [ 6567.313065] Disabling non-boot CPUs ... [ 6567.313167] Extended CMOS year: 2000 [ 6567.313167] Back to C! [ 6567.313167] PM: Restoring platform NVS memory [ 6567.313167] Extended CMOS year: 2000 [ 6567.313167] ACPI: Waking up from system sleep state S3 [ 6567.380346] pcieport 0000:00:04.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100506) [ 6567.380385] pcieport 0000:00:05.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [ 6567.380465] ahci 0000:00:11.0: restoring config space at offset 0x2 (was 0x1018f00, writing 0x1060100) [ 6567.380488] ahci 0000:00:11.0: set SATA to AHCI mode [ 6567.396099] ehci_hcd 0000:00:12.2: BAR 0: set to [mem 0xfbbff800-0xfbbff8ff] (PCI address [0xfbbff800-0xfbbff8ff]) [ 6567.396137] ehci_hcd 0000:00:12.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00112) [ 6567.412098] ehci_hcd 0000:00:13.2: BAR 0: set to [mem 0xfbbff400-0xfbbff4ff] (PCI address [0xfbbff400-0xfbbff4ff]) [ 6567.412135] ehci_hcd 0000:00:13.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00112) [ 6567.412210] pata_atiixp 0000:00:14.1: restoring config space at offset 0x3 (was 0x0, writing 0x4000) [ 6567.412232] HDA Intel 0000:00:14.2: restoring config space at offset 0xf (was 0x10a, writing 0xa) [ 6567.412255] HDA Intel 0000:00:14.2: restoring config space at offset 0x1 (was 0x4100006, writing 0x4100002) [ 6567.412356] fglrx_pci 0000:01:05.0: restoring config space at offset 0xf (was 0x1ff, writing 0x107) [ 6567.412368] fglrx_pci 0000:01:05.0: restoring config space at offset 0x3 (was 0x800000, writing 0x800010) [ 6567.412373] fglrx_pci 0000:01:05.0: restoring config space at offset 0x1 (was 0x40100107, writing 0x100103) [ 6567.412388] HDA Intel 0000:01:05.1: restoring config space at offset 0xf (was 0x2ff, writing 0x20a) [ 6567.412399] HDA Intel 0000:01:05.1: restoring config space at offset 0x4 (was 0x0, writing 0xfbde8000) [ 6567.412404] HDA Intel 0000:01:05.1: restoring config space at offset 0x3 (was 0x800000, writing 0x800010) [ 6567.412409] HDA Intel 0000:01:05.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100103) [ 6567.412484] brcm80211 0000:02:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 6567.412544] atl1c 0000:03:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 6567.412689] PM: early resume of devices complete after 32.443 msecs [ 6567.412910] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 6567.412977] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 6567.412998] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 6567.413109] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 6567.413128] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 6567.413305] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 6567.413366] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 6567.414266] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 6567.414315] fglrx_pci 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 6567.414320] fglrx_pci 0000:01:05.0: setting latency timer to 64 [ 6567.417681] [fglrx] Power up the ASIC [ 6567.417710] [fglrx] Preparing resume fglrx in kernel. [ 6567.454984] HDA Intel 0000:01:05.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 6567.454988] HDA Intel 0000:01:05.1: setting latency timer to 64 [ 6567.455034] brcm80211 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 6567.455040] brcm80211 0000:02:00.0: setting latency timer to 64 [ 6567.455052] atl1c 0000:03:00.0: wake-up capability disabled by ACPI [ 6567.455062] atl1c 0000:03:00.0: PME# disabled [ 6567.457790] [fglrx] Resuming fglrx in kernel completed. [ 6567.457979] [fglrx] IRQ 18 Enabled [ 6567.458418] sd 2:0:0:0: [sda] Starting disk [ 6567.564174] PM: resume of drv:atl1c dev:0000:03:00.0 complete after 109.116 msecs [ 6567.597716] PM: resume of drv:battery dev:PNP0C0A:00 complete after 184.505 msecs [ 6567.600148] PM: resume of drv:usb dev:usb2 complete after 144.958 msecs [ 6567.600164] PM: resume of drv:hub dev:2-0:1.0 complete after 142.171 msecs [ 6567.600171] PM: resume of drv: dev:ep_00 complete after 142.110 msecs [ 6567.600184] PM: resume of drv: dev:ep_81 complete after 142.140 msecs [ 6567.652057] PM: resume of drv:usb dev:usb6 complete after 193.701 msecs [ 6567.652072] PM: resume of drv:hub dev:6-0:1.0 complete after 193.706 msecs [ 6567.652079] PM: resume of drv: dev:ep_00 complete after 193.688 msecs [ 6567.652084] PM: resume of drv: dev:ep_81 complete after 193.706 msecs [ 6567.764106] ata6: SATA link down (SStatus 0 SControl 300) [ 6567.764143] ata5: SATA link down (SStatus 0 SControl 300) [ 6567.764195] ata4: SATA link down (SStatus 0 SControl 300) [ 6567.772139] usb 2-3: reset high speed USB device using ehci_hcd and address 2 [ 6567.936066] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 6567.936654] ata3.00: configured for UDMA/100 [ 6567.952157] PM: resume of drv:sd dev:2:0:0:0 complete after 493.734 msecs [ 6567.952171] PM: resume of drv:scsi_device dev:2:0:0:0 complete after 493.716 msecs [ 6567.952177] PM: resume of drv:scsi_disk dev:2:0:0:0 complete after 326.835 msecs [ 6568.525977] PM: resume of drv:usb dev:2-3 complete after 1067.504 msecs [ 6568.525993] PM: resume of drv:uvcvideo dev:2-3:1.0 complete after 1067.510 msecs [ 6568.526003] PM: resume of drv:uvcvideo dev:2-3:1.1 complete after 1067.495 msecs [ 6568.526008] PM: resume of drv: dev:ep_00 complete after 1067.448 msecs [ 6568.526013] PM: resume of drv: dev:ep_83 complete after 1067.518 msecs [ 6568.526019] PM: resume of drv:video4linux dev:video0 complete after 573.809 msecs [ 6568.526040] wl_ops_set_rts_threshold: Enter [ 6568.526087] PM: resume of devices complete after 1113.304 msecs [ 6568.526237] PM: resume devices took 1.112 seconds [ 6568.526270] PM: Finishing wakeup. [ 6568.526272] Restarting tasks ... done. [ 6568.596323] video LNXVIDEO:00: Restoring backlight state [ 6569.637718] atl1c 0000:03:00.0: irq 42 for MSI/MSI-X [ 6569.720802] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 6569.880382] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 6572.421661] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0 [ 6572.972284] wlan0: authenticate with 00:13:46:19:8a:2a (try 1) [ 6572.973941] wlan0: authenticated [ 6572.973970] wlan0: associate with 00:13:46:19:8a:2a (try 1) [ 6572.976386] wlan0: RX AssocResp from 00:13:46:19:8a:2a (capab=0x431 status=0 aid=3) [ 6572.976392] wlan0: associated [ 6572.977141] Associated: True [ 6572.977558] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 6573.519617] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0 [ 6583.552203] wlan0: no IPv6 routers present [ 6819.990777] Associated: False [ 6819.990831] wlan0: deauthenticating from 00:13:46:19:8a:2a by local choice (reason=3) [ 6819.991011] cfg80211: All devices are disconnected, going to restore regulatory settings [ 6819.991019] cfg80211: Restoring regulatory settings [ 6819.991717] cfg80211: Calling CRDA to update world regulatory domain [ 6820.011623] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 6820.011630] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 6820.011633] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 6820.011637] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 6820.011640] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 6820.011643] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 6820.011646] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 6820.011649] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 6820.011651] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 6820.011654] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 6820.011657] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 6820.011660] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 6820.011663] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 6820.011666] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 6820.011668] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 6820.011672] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 6820.011674] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 6820.011677] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 6820.011680] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 6820.011683] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 6820.011686] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 6820.011689] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 6820.011691] cfg80211: Disabling freq 2467 MHz [ 6820.011693] cfg80211: Disabling freq 2472 MHz [ 6820.011695] cfg80211: Disabling freq 2484 MHz [ 6820.011698] cfg80211: World regulatory domain updated: [ 6820.011700] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 6820.011703] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 6820.011706] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 6820.011709] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 6820.011712] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 6820.011715] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 6820.014623] -1 packets not freed at wlc_down!!!!!! [ 6821.108084] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0 [ 6823.777216] PM: Syncing filesystems ... done. [ 6823.788455] PM: Preparing system for mem sleep [ 6823.788469] Freezing user space processes ... (elapsed 0.01 seconds) done. [ 6823.804164] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [ 6823.820157] PM: Entering mem sleep [ 6823.820197] Suspending console(s) (use no_console_suspend to debug) [ 6823.820489] sd 2:0:0:0: [sda] Synchronizing SCSI cache [ 6823.844453] sd 2:0:0:0: [sda] Stopping disk [ 6823.898085] brcm80211 0000:02:00.0: PCI INT A disabled [ 6823.898107] HDA Intel 0000:01:05.1: PCI INT B disabled [ 6823.898124] ACPI handle has no context! [ 6823.898263] [fglrx] IRQ 18 Disabled [ 6823.898282] [fglrx] Preparing suspend fglrx in kernel. [ 6823.938484] [fglrx] Suspending fglrx in kernel completed. [ 6823.938489] [fglrx] Power down the ASIC . [ 6823.938555] fglrx_pci 0000:01:05.0: PCI INT A disabled [ 6823.938723] ehci_hcd 0000:00:13.2: PCI INT B disabled [ 6823.938736] ohci_hcd 0000:00:13.1: PCI INT A disabled [ 6823.938750] ohci_hcd 0000:00:13.0: PCI INT A disabled [ 6823.938771] ehci_hcd 0000:00:12.2: PCI INT B disabled [ 6823.938783] ohci_hcd 0000:00:12.1: PCI INT A disabled [ 6823.938797] ohci_hcd 0000:00:12.0: PCI INT A disabled [ 6823.938926] ahci 0000:00:11.0: PCI INT A disabled [ 6824.040186] HDA Intel 0000:00:14.2: PCI INT A disabled [ 6824.056093] PM: suspend of drv:HDA Intel dev:0000:00:14.2 complete after 118.751 msecs [ 6824.056113] PM: suspend of drv: dev:pci0000:00 complete after 117.159 msecs [ 6824.056119] PM: suspend of devices complete after 235.716 msecs [ 6824.056122] PM: suspend devices took 0.236 seconds [ 6824.056322] atl1c 0000:03:00.0: PME# enabled [ 6824.056334] atl1c 0000:03:00.0: wake-up capability enabled by ACPI [ 6824.104358] PM: late suspend of devices complete after 48.228 msecs [ 6824.104468] ACPI: Preparing to enter system sleep state S3 [ 6824.152601] PM: Saving platform NVS memory [ 6824.153071] Disabling non-boot CPUs ... [ 6824.153173] Extended CMOS year: 2000 [ 6824.153173] Back to C! [ 6824.153173] PM: Restoring platform NVS memory [ 6824.153173] Extended CMOS year: 2000 [ 6824.153173] ACPI: Waking up from system sleep state S3 [ 6824.220343] pcieport 0000:00:04.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100506) [ 6824.220381] pcieport 0000:00:05.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [ 6824.220461] ahci 0000:00:11.0: restoring config space at offset 0x2 (was 0x1018f00, writing 0x1060100) [ 6824.220484] ahci 0000:00:11.0: set SATA to AHCI mode [ 6824.236099] ehci_hcd 0000:00:12.2: BAR 0: set to [mem 0xfbbff800-0xfbbff8ff] (PCI address [0xfbbff800-0xfbbff8ff]) [ 6824.236136] ehci_hcd 0000:00:12.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00112) [ 6824.252096] ehci_hcd 0000:00:13.2: BAR 0: set to [mem 0xfbbff400-0xfbbff4ff] (PCI address [0xfbbff400-0xfbbff4ff]) [ 6824.252133] ehci_hcd 0000:00:13.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00112) [ 6824.252206] pata_atiixp 0000:00:14.1: restoring config space at offset 0x3 (was 0x0, writing 0x4000) [ 6824.252229] HDA Intel 0000:00:14.2: restoring config space at offset 0xf (was 0x10a, writing 0xa) [ 6824.252252] HDA Intel 0000:00:14.2: restoring config space at offset 0x1 (was 0x4100006, writing 0x4100002) [ 6824.252352] fglrx_pci 0000:01:05.0: restoring config space at offset 0xf (was 0x1ff, writing 0x107) [ 6824.252364] fglrx_pci 0000:01:05.0: restoring config space at offset 0x3 (was 0x800000, writing 0x800010) [ 6824.252369] fglrx_pci 0000:01:05.0: restoring config space at offset 0x1 (was 0x40100107, writing 0x40100103) [ 6824.252384] HDA Intel 0000:01:05.1: restoring config space at offset 0xf (was 0x2ff, writing 0x20a) [ 6824.252396] HDA Intel 0000:01:05.1: restoring config space at offset 0x4 (was 0x0, writing 0xfbde8000) [ 6824.252400] HDA Intel 0000:01:05.1: restoring config space at offset 0x3 (was 0x800000, writing 0x800010) [ 6824.252405] HDA Intel 0000:01:05.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100103) [ 6824.252480] brcm80211 0000:02:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 6824.252542] atl1c 0000:03:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 6824.252687] PM: early resume of devices complete after 32.445 msecs [ 6824.252909] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 6824.252975] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 6824.252996] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 6824.253108] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 6824.253127] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 6824.253146] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 6824.253192] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 6824.253224] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 6824.253274] fglrx_pci 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 6824.253278] fglrx_pci 0000:01:05.0: setting latency timer to 64 [ 6824.256636] [fglrx] Power up the ASIC [ 6824.256665] [fglrx] Preparing resume fglrx in kernel. [ 6824.294687] brcm80211 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 6824.294693] brcm80211 0000:02:00.0: setting latency timer to 64 [ 6824.294705] atl1c 0000:03:00.0: wake-up capability disabled by ACPI [ 6824.294711] atl1c 0000:03:00.0: PME# disabled [ 6824.294882] sd 2:0:0:0: [sda] Starting disk [ 6824.297592] [fglrx] Resuming fglrx in kernel completed. [ 6824.297780] [fglrx] IRQ 18 Enabled [ 6824.297956] HDA Intel 0000:01:05.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 6824.297962] HDA Intel 0000:01:05.1: setting latency timer to 64 [ 6824.404133] PM: resume of drv:atl1c dev:0000:03:00.0 complete after 109.423 msecs [ 6824.440147] PM: resume of drv:usb dev:usb2 complete after 145.394 msecs [ 6824.440164] PM: resume of drv:hub dev:2-0:1.0 complete after 145.412 msecs [ 6824.440171] PM: resume of drv: dev:ep_00 complete after 145.414 msecs [ 6824.440185] PM: resume of drv: dev:ep_81 complete after 145.432 msecs [ 6824.442435] PM: resume of drv:battery dev:PNP0C0A:00 complete after 144.559 msecs [ 6824.494965] PM: resume of drv:usb dev:usb6 complete after 200.172 msecs [ 6824.494994] PM: resume of drv:hub dev:6-0:1.0 complete after 200.202 msecs [ 6824.495002] PM: resume of drv: dev:ep_00 complete after 200.138 msecs [ 6824.495006] PM: resume of drv: dev:ep_81 complete after 200.212 msecs [ 6824.604106] ata5: SATA link down (SStatus 0 SControl 300) [ 6824.604165] ata4: SATA link down (SStatus 0 SControl 300) [ 6824.604195] ata6: SATA link down (SStatus 0 SControl 300) [ 6824.776099] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 6824.776690] ata3.00: configured for UDMA/100 [ 6824.792184] PM: resume of drv:sd dev:2:0:0:0 complete after 497.294 msecs [ 6824.792196] PM: resume of drv:scsi_device dev:2:0:0:0 complete after 497.278 msecs [ 6824.792202] PM: resume of drv:scsi_disk dev:2:0:0:0 complete after 297.121 msecs [ 6829.604137] usb 2-3: reset high speed USB device using ehci_hcd and address 2 [ 6830.353959] PM: resume of drv:usb dev:2-3 complete after 6059.000 msecs [ 6830.353976] PM: resume of drv:uvcvideo dev:2-3:1.0 complete after 6059.011 msecs [ 6830.353986] PM: resume of drv:uvcvideo dev:2-3:1.1 complete after 6056.193 msecs [ 6830.353991] PM: resume of drv: dev:ep_00 complete after 6056.048 msecs [ 6830.353996] PM: resume of drv: dev:ep_83 complete after 6058.997 msecs [ 6830.354002] PM: resume of drv:video4linux dev:video0 complete after 5561.768 msecs [ 6830.354023] wl_ops_set_rts_threshold: Enter [ 6830.354070] PM: resume of devices complete after 6101.289 msecs [ 6830.354221] PM: resume devices took 6.100 seconds [ 6830.354255] PM: Finishing wakeup. [ 6830.354257] Restarting tasks ... done. [ 6830.400886] video LNXVIDEO:00: Restoring backlight state [ 6830.814995] atl1c 0000:03:00.0: irq 42 for MSI/MSI-X [ 6830.896733] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 6830.986975] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 6832.643120] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=600 [ 6832.809434] wlan0: authenticate with 00:13:46:19:8a:2a (try 1) [ 6832.811888] wlan0: authenticated [ 6832.811917] wlan0: associate with 00:13:46:19:8a:2a (try 1) [ 6832.814169] wlan0: RX AssocResp from 00:13:46:19:8a:2a (capab=0x431 status=0 aid=2) [ 6832.814174] wlan0: associated [ 6832.814911] Associated: True [ 6832.815306] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 6833.775254] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=600 [ 6840.780224] usb 3-1: new low speed USB device using ohci_hcd and address 3 [ 6840.958047] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.0/input/input12 [ 6840.958328] generic-usb 0003:046D:C03E.0002: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:12.0-1/input0 [ 6843.040096] wlan0: no IPv6 routers present