[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.35-22-generic (buildd@rothera) (gcc version 4.4.5 (Ubuntu/Linaro 4.4.4-14ubuntu4) ) #33-Ubuntu SMP Sun Sep 19 20:34:50 UTC 2010 (Ubuntu 2.6.35-22.33-generic 2.6.35.4) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003ff70000 (usable) [ 0.000000] BIOS-e820: 000000003ff70000 - 000000003ff7b000 (ACPI data) [ 0.000000] BIOS-e820: 000000003ff7b000 - 000000003ff80000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003ff80000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] NX (Execute Disable) protection: approximated by x86 segment limits [ 0.000000] DMI present. [ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0x3ff70 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-DFFFF uncachable [ 0.000000] E0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FC0000000 write-back [ 0.000000] 1 base 03FF80000 mask FFFF80000 uncachable [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 0000000000002000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000001000 (reserved) [ 0.000000] modified: 0000000000001000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009f800 (usable) [ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000d2000 - 00000000000d4000 (reserved) [ 0.000000] modified: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000003ff70000 (usable) [ 0.000000] modified: 000000003ff70000 - 000000003ff7b000 (ACPI data) [ 0.000000] modified: 000000003ff7b000 - 000000003ff80000 (ACPI NVS) [ 0.000000] modified: 000000003ff80000 - 0000000040000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000ff800000 - 00000000ffc00000 (reserved) [ 0.000000] modified: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] found SMP MP-table at [c00f6d70] f6d70 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 15000-1a000 [ 0.000000] RAMDISK: 3f48e000 - 3ff70000 [ 0.000000] Allocated new RAMDISK: 009a5000 - 0148698f [ 0.000000] Move RAMDISK from 000000003f48e000 - 000000003ff6f98e to 009a5000 - 0148698e [ 0.000000] ACPI: RSDP 000f6d80 00014 (v00 GATEWA) [ 0.000000] ACPI: RSDT 3ff74309 00030 (v01 GATEWA M675PRR 20041012 LTP 00000000) [ 0.000000] ACPI: FACP 3ff7af06 00074 (v01 GATEWA M675PRR 20041012 PTL 00000003) [ 0.000000] ACPI: DSDT 3ff74339 06BCD (v01 GATEWA M675PRR 20041012 MSFT 0100000E) [ 0.000000] ACPI: FACS 3ff7bfc0 00040 [ 0.000000] ACPI: APIC 3ff7af7a 0005E (v01 GATEWA M675PRR 20041012 LTP 00000000) [ 0.000000] ACPI: BOOT 3ff7afd8 00028 (v01 GATEWA M675PRR 20041012 LTP 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 135MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000001 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0003ff70 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000001 -> 0x00000002 [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0003ff70 [ 0.000000] On node 0 totalpages: 261888 [ 0.000000] free_area_init_node: node 0, pgdat c07ffd40, node_mem_map c1488020 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3952 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 271 pages used for memmap [ 0.000000] HighMem zone: 34403 pages, LIFO batch:7 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] early_res array is doubled to 64 at [16000 - 167ff] [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000010000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000 [ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000 [ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000 [ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:bec00000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c2000000 s36416 r0 d20928 u2097152 [ 0.000000] pcpu-alloc: s36416 r0 d20928 u2097152 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259841 [ 0.000000] Kernel command line: file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- maybe-ubiquity [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 5239980 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Subtract (51 early reservations) [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE [ 0.000000] #2 [0000100000 - 00009a0adc] TEXT DATA BSS [ 0.000000] #3 [00009a1000 - 00009a4220] BRK [ 0.000000] #4 [00000f6d80 - 0000100000] BIOS reserved [ 0.000000] #5 [00000f6d70 - 00000f6d80] MP-table mpf [ 0.000000] #6 [000009f800 - 000009fd70] BIOS reserved [ 0.000000] #7 [000009feb8 - 00000f6d70] BIOS reserved [ 0.000000] #8 [000009fd70 - 000009feb8] MP-table mpc [ 0.000000] #9 [0000010000 - 0000011000] TRAMPOLINE [ 0.000000] #10 [0000011000 - 0000015000] ACPI WAKEUP [ 0.000000] #11 [0000015000 - 0000016000] PGTABLE [ 0.000000] #12 [00009a5000 - 0001487000] NEW RAMDISK [ 0.000000] #13 [0001487000 - 0001488000] BOOTMEM [ 0.000000] #14 [0001488000 - 0001c88000] BOOTMEM [ 0.000000] #15 [0001c88000 - 0001c88004] BOOTMEM [ 0.000000] #16 [0001c88040 - 0001c88100] BOOTMEM [ 0.000000] #17 [0001c88100 - 0001c88154] BOOTMEM [ 0.000000] #18 [0001c88180 - 0001c8b180] BOOTMEM [ 0.000000] #19 [0001c8b180 - 0001c8b190] BOOTMEM [ 0.000000] #20 [0001c8b1c0 - 0001c8bdc0] BOOTMEM [ 0.000000] #21 [0001c8bdc0 - 0001c8bde7] BOOTMEM [ 0.000000] #22 [0001c8be00 - 0001c8bfa4] BOOTMEM [ 0.000000] #23 [0001c8bfc0 - 0001c8c000] BOOTMEM [ 0.000000] #24 [0001c8c000 - 0001c8c040] BOOTMEM [ 0.000000] #25 [0001c8c040 - 0001c8c080] BOOTMEM [ 0.000000] #26 [0001c8c080 - 0001c8c0c0] BOOTMEM [ 0.000000] #27 [0001c8c0c0 - 0001c8c100] BOOTMEM [ 0.000000] #28 [0001c8c100 - 0001c8c140] BOOTMEM [ 0.000000] #29 [0001c8c140 - 0001c8c180] BOOTMEM [ 0.000000] #30 [0001c8c180 - 0001c8c1c0] BOOTMEM [ 0.000000] #31 [0001c8c1c0 - 0001c8c200] BOOTMEM [ 0.000000] #32 [0001c8c200 - 0001c8c240] BOOTMEM [ 0.000000] #33 [0001c8c240 - 0001c8c280] BOOTMEM [ 0.000000] #34 [0001c8c280 - 0001c8c2c0] BOOTMEM [ 0.000000] #35 [0001c8c2c0 - 0001c8c2d0] BOOTMEM [ 0.000000] #36 [0001c8c300 - 0001c8c310] BOOTMEM [ 0.000000] #37 [0001c8c340 - 0001c8c3a4] BOOTMEM [ 0.000000] #38 [0001c8c3c0 - 0001c8c424] BOOTMEM [ 0.000000] #39 [0002000000 - 000200e000] BOOTMEM [ 0.000000] #40 [0002200000 - 000220e000] BOOTMEM [ 0.000000] #41 [0001c8e440 - 0001c8e444] BOOTMEM [ 0.000000] #42 [0001c8e480 - 0001c8e484] BOOTMEM [ 0.000000] #43 [0001c8e4c0 - 0001c8e4c8] BOOTMEM [ 0.000000] #44 [0001c8e500 - 0001c8e508] BOOTMEM [ 0.000000] #45 [0001c8e540 - 0001c8e5e8] BOOTMEM [ 0.000000] #46 [0001c8e600 - 0001c8e668] BOOTMEM [ 0.000000] #47 [0001c8e680 - 0001c92680] BOOTMEM [ 0.000000] #48 [0001c92680 - 0001d12680] BOOTMEM [ 0.000000] #49 [0001d12680 - 0001d52680] BOOTMEM [ 0.000000] #50 [000220e000 - 000270d4ac] BOOTMEM [ 0.000000] Initializing HighMem for node 0 (000377fe:0003ff70) [ 0.000000] Memory: 1013292k/1048000k available (4928k kernel code, 34260k reserved, 2336k data, 684k init, 138696k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc0819000 - 0xc08c4000 ( 684 kB) [ 0.000000] .data : 0xc05d029e - 0xc0818668 (2336 kB) [ 0.000000] .text : 0xc0100000 - 0xc05d029e (4928 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] Verbose stalled-CPUs detection is disabled. [ 0.000000] NR_IRQS:2304 nr_irqs:512 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 3391.635 MHz processor. [ 0.004006] Calibrating delay loop (skipped), value calculated using timer frequency.. 6783.27 BogoMIPS (lpj=13566540) [ 0.004012] pid_max: default: 32768 minimum: 301 [ 0.004034] Security Framework initialized [ 0.004059] AppArmor: AppArmor initialized [ 0.004061] Yama: becoming mindful. [ 0.004124] Mount-cache hash table entries: 512 [ 0.004296] Initializing cgroup subsys ns [ 0.004301] Initializing cgroup subsys cpuacct [ 0.004306] Initializing cgroup subsys memory [ 0.004318] Initializing cgroup subsys devices [ 0.004321] Initializing cgroup subsys freezer [ 0.004324] Initializing cgroup subsys net_cls [ 0.004359] CPU: Physical Processor ID: 0 [ 0.004361] CPU: Processor Core ID: 0 [ 0.004364] mce: CPU supports 4 MCE banks [ 0.004376] CPU0: Thermal monitoring enabled (TM1) [ 0.004388] Performance Events: Netburst events, Netburst P4/Xeon PMU driver. [ 0.004400] ... version: 0 [ 0.004402] ... bit width: 40 [ 0.004404] ... generic registers: 18 [ 0.004407] ... value mask: 000000ffffffffff [ 0.004409] ... max period: 0000007fffffffff [ 0.004411] ... fixed-purpose events: 0 [ 0.004413] ... event mask: 000000000003ffff [ 0.008065] ACPI: Core revision 20100428 [ 0.020034] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.020042] ftrace: allocating 21758 entries in 43 pages [ 0.024086] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.024382] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 [ 0.028000] ..MP-BIOS bug: 8254 timer not connected to IO-APIC [ 0.028000] ...trying to set up timer (IRQ0) through the 8259A ... [ 0.028000] ..... (found apic 0 pin 0) ... [ 0.068292] ....... works. [ 0.068294] CPU0: Intel(R) Pentium(R) 4 CPU 3.40GHz stepping 09 [ 0.072000] APIC calibration not consistent with PM-Timer: 96ms instead of 100ms [ 0.072000] APIC delta adjusted to PM-Timer: 1246873 (1197072) [ 0.072000] Booting Node 0, Processors #1 Ok. [ 0.008000] Initializing CPU#1 [ 0.160024] Brought up 2 CPUs [ 0.160030] Total of 2 processors activated (13566.25 BogoMIPS). [ 0.160326] devtmpfs: initialized [ 0.161198] regulator: core version 0.5 [ 0.161223] Time: 17:04:55 Date: 04/13/11 [ 0.161279] NET: Registered protocol family 16 [ 0.161324] Trying to unpack rootfs image as initramfs... [ 0.161538] EISA bus registered [ 0.161555] ACPI: bus type pci registered [ 0.161719] PCI: PCI BIOS revision 2.10 entry at 0xfd952, last bus=3 [ 0.161723] PCI: Using configuration type 1 for base access [ 0.164543] bio: create slab at 0 [ 0.167231] ACPI: EC: Look up EC in DSDT [ 0.174049] ACPI: Interpreter enabled [ 0.174049] ACPI: (supports S0 S3 S4 S5) [ 0.174049] ACPI: Using IOAPIC for interrupt routing [ 0.184531] ACPI: EC: GPE = 0x1d, I/O: command/status = 0x66, data = 0x62 [ 0.184621] ACPI: Power Resource [PFN0] (off) [ 0.193070] ACPI: ACPI Dock Station Driver: 3 docks/bays found [ 0.193081] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.196449] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.200017] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.200023] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.200029] pci_root PNP0A03:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored) [ 0.200035] pci_root PNP0A03:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored) [ 0.200041] pci_root PNP0A03:00: host bridge window [mem 0x40000000-0xfebfffff] (ignored) [ 0.200047] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.200069] pci 0000:00:00.0: Enabling MCH 'Overflow' Device [ 0.200082] pci 0000:00:00.0: reg 10: [mem 0xe8000000-0xefffffff pref] [ 0.200215] pci 0000:00:06.0: reg 10: [mem 0xfecf0000-0xfecf0fff] [ 0.200319] pci 0000:00:1d.0: reg 20: [io 0x1800-0x181f] [ 0.200381] pci 0000:00:1d.1: reg 20: [io 0x1820-0x183f] [ 0.200442] pci 0000:00:1d.2: reg 20: [io 0x1840-0x185f] [ 0.200503] pci 0000:00:1d.3: reg 20: [io 0x1860-0x187f] [ 0.200566] pci 0000:00:1d.7: reg 10: [mem 0xe0000000-0xe00003ff] [ 0.200633] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.200640] pci 0000:00:1d.7: PME# disabled [ 0.200740] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000 [ 0.200750] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH4 ACPI/GPIO/TCO [ 0.200757] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH4 GPIO [ 0.200786] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007] [ 0.200796] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003] [ 0.200806] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007] [ 0.200815] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003] [ 0.200824] pci 0000:00:1f.1: reg 20: [io 0x1880-0x188f] [ 0.200834] pci 0000:00:1f.1: reg 24: [mem 0x00000000-0x000003ff] [ 0.200893] pci 0000:00:1f.3: reg 20: [io 0x18a0-0x18bf] [ 0.200942] pci 0000:00:1f.5: reg 10: [io 0x1c00-0x1cff] [ 0.200951] pci 0000:00:1f.5: reg 14: [io 0x18c0-0x18ff] [ 0.200960] pci 0000:00:1f.5: reg 18: [mem 0xe0000c00-0xe0000dff] [ 0.200970] pci 0000:00:1f.5: reg 1c: [mem 0xe0000800-0xe00008ff] [ 0.201005] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold [ 0.201012] pci 0000:00:1f.5: PME# disabled [ 0.201053] pci 0000:00:1f.6: reg 10: [io 0x2400-0x24ff] [ 0.201062] pci 0000:00:1f.6: reg 14: [io 0x2000-0x207f] [ 0.201108] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold [ 0.201114] pci 0000:00:1f.6: PME# disabled [ 0.201160] pci 0000:01:00.0: reg 10: [mem 0xf0000000-0xf7ffffff pref] [ 0.201170] pci 0000:01:00.0: reg 14: [io 0x3000-0x30ff] [ 0.201178] pci 0000:01:00.0: reg 18: [mem 0xe0100000-0xe010ffff] [ 0.201198] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.201224] pci 0000:01:00.0: supports D1 D2 [ 0.201270] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.201278] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff] [ 0.201284] pci 0000:00:01.0: bridge window [mem 0xe0100000-0xe01fffff] [ 0.201291] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf7ffffff pref] [ 0.201329] pci 0000:02:01.0: reg 10: [mem 0xe0200000-0xe021ffff] [ 0.201343] pci 0000:02:01.0: reg 18: [io 0x4000-0x401f] [ 0.201380] pci 0000:02:01.0: PME# supported from D0 D3hot D3cold [ 0.201387] pci 0000:02:01.0: PME# disabled [ 0.201431] pci 0000:00:03.0: PCI bridge to [bus 02-02] [ 0.201438] pci 0000:00:03.0: bridge window [io 0x4000-0x4fff] [ 0.201445] pci 0000:00:03.0: bridge window [mem 0xe0200000-0xe02fffff] [ 0.201452] pci 0000:00:03.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.201496] pci 0000:03:01.0: reg 10: [mem 0x00000000-0x00000fff] [ 0.201520] pci 0000:03:01.0: supports D1 D2 [ 0.201524] pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot [ 0.201530] pci 0000:03:01.0: PME# disabled [ 0.201565] pci 0000:03:01.1: reg 10: [mem 0xe0304000-0xe03047ff] [ 0.201575] pci 0000:03:01.1: reg 14: [mem 0xe0300000-0xe0303fff] [ 0.201622] pci 0000:03:01.1: supports D1 D2 [ 0.201626] pci 0000:03:01.1: PME# supported from D0 D1 D2 D3hot [ 0.201633] pci 0000:03:01.1: PME# disabled [ 0.201690] pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode) [ 0.201698] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.201706] pci 0000:00:1e.0: bridge window [mem 0xe0300000-0xe03fffff] [ 0.201714] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.201719] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode) [ 0.201724] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode) [ 0.201769] pci_bus 0000:04: [bus 04-07] partially hidden behind transparent bridge 0000:03 [bus 03-03] [ 0.201790] pci_bus 0000:00: on NUMA node 0 [ 0.201798] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.201999] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.ICSA._PRT] [ 0.202086] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 0.202190] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT] [ 0.207173] ACPI: PCI Interrupt Link [LNKA] (IRQs *10) [ 0.207305] ACPI: PCI Interrupt Link [LNKB] (IRQs *10) [ 0.207436] ACPI: PCI Interrupt Link [LNKC] (IRQs *10) [ 0.207566] ACPI: PCI Interrupt Link [LNKD] (IRQs *11) [ 0.207696] ACPI: PCI Interrupt Link [LNKE] (IRQs 10) *0 [ 0.207862] ACPI: PCI Interrupt Link [LNKF] (IRQs 11) *0, disabled. [ 0.208013] ACPI: PCI Interrupt Link [LNKG] (IRQs 10) *0, disabled. [ 0.208148] ACPI: PCI Interrupt Link [LNKH] (IRQs *10) [ 0.208219] HEST: Table is not found! [ 0.208391] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.208401] vgaarb: loaded [ 0.208695] SCSI subsystem initialized [ 0.208826] libata version 3.00 loaded. [ 0.208927] usbcore: registered new interface driver usbfs [ 0.208951] usbcore: registered new interface driver hub [ 0.208999] usbcore: registered new device driver usb [ 0.209235] ACPI: WMI: Mapper loaded [ 0.209239] PCI: Using ACPI for IRQ routing [ 0.209246] PCI: pci_cache_line_size set to 64 bytes [ 0.209371] reserve RAM buffer: 0000000000002000 - 000000000000ffff [ 0.209376] reserve RAM buffer: 000000000009f800 - 000000000009ffff [ 0.209381] reserve RAM buffer: 000000003ff70000 - 000000003fffffff [ 0.209546] NetLabel: Initializing [ 0.209550] NetLabel: domain hash size = 128 [ 0.209554] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.209578] NetLabel: unlabeled traffic allowed by default [ 0.209719] hpet clockevent registered [ 0.209725] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.209733] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.209743] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 2.676060] Switching to clocksource tsc [ 2.700734] AppArmor: AppArmor Filesystem Enabled [ 2.700772] pnp: PnP ACPI init [ 2.700817] ACPI: bus type pnp registered [ 2.710649] pnp: PnP ACPI: found 10 devices [ 2.710657] ACPI: ACPI bus type pnp unregistered [ 2.710667] PnPBIOS: Disabled by ACPI PNP [ 2.710717] system 00:01: [io 0x0800-0x080f] has been reserved [ 2.710724] system 00:01: [io 0x1000-0x107f] has been reserved [ 2.710730] system 00:01: [io 0x1180-0x11bf] has been reserved [ 2.710736] system 00:01: [io 0x01c0-0x01cf] has been reserved [ 2.710743] system 00:01: [io 0xfe00] has been reserved [ 2.710749] system 00:01: [io 0x04d0-0x04d1] has been reserved [ 2.710754] system 00:01: [io 0x0600-0x060f] has been reserved [ 2.710760] system 00:01: [io 0x0610-0x061f] has been reserved [ 2.710769] system 00:01: [mem 0xff800000-0xffbfffff] has been reserved [ 2.710777] system 00:01: [mem 0xfff00000-0xffffffff] has been reserved [ 2.710784] system 00:01: [mem 0x00000000-0x0009ffff] could not be reserved [ 2.710790] system 00:01: [mem 0x000e0000-0x000fffff] could not be reserved [ 2.710796] system 00:01: [mem 0xfebffc00-0xfebfffff] has been reserved [ 2.710803] system 00:01: [mem 0xfecf0000-0xfecfffff] could not be reserved [ 2.748873] pci 0000:00:1e.0: BAR 15: assigned [mem 0x40000000-0x43ffffff pref] [ 2.748883] pci 0000:00:1e.0: BAR 13: assigned [io 0x5000-0x5fff] [ 2.748888] pci 0000:00:1f.1: BAR 5: assigned [mem 0x44000000-0x440003ff] [ 2.748900] pci 0000:00:1f.1: BAR 5: set to [mem 0x44000000-0x440003ff] (PCI address [0x44000000-0x440003ff] [ 2.748907] pci 0000:01:00.0: BAR 6: assigned [mem 0xe0120000-0xe013ffff pref] [ 2.748912] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 2.748918] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff] [ 2.748928] pci 0000:00:01.0: bridge window [mem 0xe0100000-0xe01fffff] [ 2.748935] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf7ffffff pref] [ 2.748946] pci 0000:00:03.0: PCI bridge to [bus 02-02] [ 2.748951] pci 0000:00:03.0: bridge window [io 0x4000-0x4fff] [ 2.748960] pci 0000:00:03.0: bridge window [mem 0xe0200000-0xe02fffff] [ 2.748968] pci 0000:00:03.0: bridge window [mem pref disabled] [ 2.748981] pci 0000:03:01.0: BAR 15: assigned [mem 0x40000000-0x43ffffff pref] [ 2.748986] pci 0000:03:01.0: BAR 16: assigned [mem 0x48000000-0x4bffffff] [ 2.748992] pci 0000:03:01.0: BAR 0: assigned [mem 0xe0305000-0xe0305fff] [ 2.749000] pci 0000:03:01.0: BAR 0: set to [mem 0xe0305000-0xe0305fff] (PCI address [0xe0305000-0xe0305fff] [ 2.749006] pci 0000:03:01.0: BAR 13: assigned [io 0x5000-0x50ff] [ 2.749012] pci 0000:03:01.0: BAR 14: assigned [io 0x5400-0x54ff] [ 2.749017] pci 0000:03:01.0: CardBus bridge to [bus 04-07] [ 2.749021] pci 0000:03:01.0: bridge window [io 0x5000-0x50ff] [ 2.749028] pci 0000:03:01.0: bridge window [io 0x5400-0x54ff] [ 2.749036] pci 0000:03:01.0: bridge window [mem 0x40000000-0x43ffffff pref] [ 2.749043] pci 0000:03:01.0: bridge window [mem 0x48000000-0x4bffffff] [ 2.749050] pci 0000:00:1e.0: PCI bridge to [bus 03-03] [ 2.749055] pci 0000:00:1e.0: bridge window [io 0x5000-0x5fff] [ 2.749063] pci 0000:00:1e.0: bridge window [mem 0xe0300000-0xe03fffff] [ 2.749071] pci 0000:00:1e.0: bridge window [mem 0x40000000-0x43ffffff pref] [ 2.749124] pci 0000:00:1e.0: setting latency timer to 64 [ 2.749174] pci 0000:03:01.0: power state changed by ACPI to D0 [ 2.749189] pci 0000:03:01.0: power state changed by ACPI to D0 [ 2.749210] alloc irq_desc for 17 on node -1 [ 2.749215] alloc kstat_irqs on node -1 [ 2.749237] pci 0000:03:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 2.749244] pci 0000:03:01.0: setting latency timer to 64 [ 2.749252] pci_bus 0000:00: resource 0 [io 0x0000-0xffff] [ 2.749256] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff] [ 2.749261] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff] [ 2.749265] pci_bus 0000:01: resource 1 [mem 0xe0100000-0xe01fffff] [ 2.749270] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf7ffffff pref] [ 2.749275] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff] [ 2.749282] pci_bus 0000:02: resource 1 [mem 0xe0200000-0xe02fffff] [ 2.749289] pci_bus 0000:03: resource 0 [io 0x5000-0x5fff] [ 2.749295] pci_bus 0000:03: resource 1 [mem 0xe0300000-0xe03fffff] [ 2.749301] pci_bus 0000:03: resource 2 [mem 0x40000000-0x43ffffff pref] [ 2.749308] pci_bus 0000:03: resource 4 [io 0x0000-0xffff] [ 2.749314] pci_bus 0000:03: resource 5 [mem 0x00000000-0xffffffff] [ 2.749320] pci_bus 0000:04: resource 0 [io 0x5000-0x50ff] [ 2.749324] pci_bus 0000:04: resource 1 [io 0x5400-0x54ff] [ 2.749330] pci_bus 0000:04: resource 2 [mem 0x40000000-0x43ffffff pref] [ 2.749334] pci_bus 0000:04: resource 3 [mem 0x48000000-0x4bffffff] [ 2.749431] NET: Registered protocol family 2 [ 2.749583] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 2.750157] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 2.751305] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 2.751931] TCP: Hash tables configured (established 131072 bind 65536) [ 2.751943] TCP reno registered [ 2.751958] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 2.751987] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 2.752282] NET: Registered protocol family 1 [ 2.752481] pci 0000:01:00.0: Boot video device [ 2.752488] PCI: CLS mismatch (1020 != 32), using 64 bytes [ 2.752544] Simple Boot Flag at 0x36 set to 0x1 [ 2.752762] cpufreq-nforce2: No nForce2 chipset. [ 2.752833] Scanning for low memory corruption every 60 seconds [ 2.753257] audit: initializing netlink socket (disabled) [ 2.753280] type=2000 audit(1302714296.752:1): initialized [ 2.764901] highmem bounce pool size: 64 pages [ 2.764921] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 2.768111] VFS: Disk quotas dquot_6.5.2 [ 2.768332] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 2.769818] fuse init (API version 7.14) [ 2.770174] msgmni has been set to 1708 [ 2.774870] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 2.774875] io scheduler noop registered [ 2.774877] io scheduler deadline registered [ 2.774893] io scheduler cfq registered (default) [ 2.775094] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 2.775123] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 2.775648] ACPI: AC Adapter [ACAD] (on-line) [ 2.775808] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 2.776091] ACPI: Lid Switch [LID] [ 2.776205] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 2.776215] ACPI: Sleep Button [SLPB] [ 2.776306] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 2.776313] ACPI: Power Button [PWRF] [ 2.776523] ACPI: Fan [FAN0] (off) [ 2.776781] ACPI: acpi_idle registered with cpuidle [ 2.847917] thermal LNXTHERM:01: registered as thermal_zone0 [ 2.847933] ACPI: Thermal Zone [THRM] (54 C) [ 2.848077] ERST: Table is not found! [ 2.848303] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.848821] serial 0000:00:1f.6: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 2.848831] serial 0000:00:1f.6: PCI INT B disabled [ 2.850901] brd: module loaded [ 2.851911] loop: module loaded [ 2.852282] ata_piix 0000:00:1f.1: version 2.13 [ 2.852315] ata_piix 0000:00:1f.1: power state changed by ACPI to D0 [ 2.852328] ata_piix 0000:00:1f.1: power state changed by ACPI to D0 [ 2.852340] alloc irq_desc for 18 on node -1 [ 2.852344] alloc kstat_irqs on node -1 [ 2.852356] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 2.852420] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 2.852542] scsi0 : ata_piix [ 2.852708] scsi1 : ata_piix [ 2.854348] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1880 irq 14 [ 2.854355] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1888 irq 15 [ 2.855021] Fixed MDIO Bus: probed [ 2.855088] PPP generic driver version 2.4.2 [ 2.855196] tun: Universal TUN/TAP device driver, 1.6 [ 2.855201] tun: (C) 1999-2004 Max Krasnyansky [ 2.855362] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.855399] alloc irq_desc for 23 on node -1 [ 2.855403] alloc kstat_irqs on node -1 [ 2.855414] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 2.855441] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 2.855448] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 2.855510] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 2.855551] ehci_hcd 0000:00:1d.7: debug port 1 [ 2.859456] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported [ 2.859486] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe0000000 [ 2.863661] isapnp: Scanning for PnP cards... [ 2.912952] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 2.913256] hub 1-0:1.0: USB hub found [ 2.913268] hub 1-0:1.0: 8 ports detected [ 2.913434] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.913465] uhci_hcd: USB Universal Host Controller Interface driver [ 2.913527] alloc irq_desc for 16 on node -1 [ 2.913531] alloc kstat_irqs on node -1 [ 2.913542] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.913554] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 2.913561] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 2.913632] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 2.913678] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001800 [ 2.913889] hub 2-0:1.0: USB hub found [ 2.913897] hub 2-0:1.0: 2 ports detected [ 2.914006] alloc irq_desc for 19 on node -1 [ 2.914010] alloc kstat_irqs on node -1 [ 2.914018] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 2.914028] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 2.914034] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 2.914096] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 2.914137] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001820 [ 2.914340] hub 3-0:1.0: USB hub found [ 2.914347] hub 3-0:1.0: 2 ports detected [ 2.914449] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 2.914459] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 2.914465] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 2.914532] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 2.914572] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840 [ 2.914801] hub 4-0:1.0: USB hub found [ 2.914808] hub 4-0:1.0: 2 ports detected [ 2.914915] uhci_hcd 0000:00:1d.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.914925] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 2.914930] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 2.914993] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 2.915024] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001860 [ 2.915229] hub 5-0:1.0: USB hub found [ 2.915237] hub 5-0:1.0: 2 ports detected [ 2.915439] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOU2] at 0x60,0x64 irq 1,12 [ 2.916734] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.916751] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.916974] mice: PS/2 mouse device common for all mice [ 2.917256] rtc_cmos 00:04: RTC can wake from S4 [ 2.917327] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 2.917357] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 2.917555] device-mapper: uevent: version 1.0.3 [ 3.179457] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 3.223218] isapnp: No Plug & Play device found [ 3.224168] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com [ 3.224379] device-mapper: multipath: version 1.1.1 loaded [ 3.224384] device-mapper: multipath round-robin: version 1.0.0 loaded [ 3.224612] EISA: Probing bus 0 at eisa.0 [ 3.224624] Cannot allocate resource for EISA slot 1 [ 3.224629] Cannot allocate resource for EISA slot 2 [ 3.224634] Cannot allocate resource for EISA slot 3 [ 3.224638] Cannot allocate resource for EISA slot 4 [ 3.224642] Cannot allocate resource for EISA slot 5 [ 3.224661] EISA: Detected 0 cards. [ 3.224845] cpuidle: using governor ladder [ 3.224847] cpuidle: using governor menu [ 3.225517] TCP cubic registered [ 3.225774] NET: Registered protocol family 10 [ 3.226486] lo: Disabled Privacy Extensions [ 3.226971] NET: Registered protocol family 17 [ 3.227058] Using IPI No-Shortcut mode [ 3.227231] PM: Resume from disk failed. [ 3.227259] registered taskstats version 1 [ 3.227537] Magic number: 7:280:87 [ 3.227598] button LNXPWRBN:00: hash matches [ 3.227648] rtc_cmos 00:04: setting system clock to 2011-04-13 17:04:58 UTC (1302714298) [ 3.227654] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 3.227657] EDD information not available. [ 3.239747] ACPI: Battery Slot [BAT1] (battery present) [ 3.259772] Freeing initrd memory: 11144k freed [ 3.385544] ata2.00: ATAPI: TOSHIBA DVD-ROM SD-R6112, 1031, max UDMA/33 [ 3.385576] ata1.00: ATA-6: HTS541080G9AT00, MB4OA60A, max UDMA/100 [ 3.385581] ata1.00: 156301488 sectors, multi 16: LBA [ 3.392220] ata2.00: configured for UDMA/33 [ 3.400456] ata1.00: configured for UDMA/100 [ 3.400631] scsi 0:0:0:0: Direct-Access ATA HTS541080G9AT00 MB4O PQ: 0 ANSI: 5 [ 3.400822] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 3.400903] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.400932] sd 0:0:0:0: [sda] Write Protect is off [ 3.400938] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.400988] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.401361] sda: [ 3.402007] scsi 1:0:0:0: CD-ROM TOSHIBA DVD-ROM SD-R6112 1031 PQ: 0 ANSI: 5 [ 3.402595] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 3.402599] Uniform CD-ROM driver Revision: 3.20 [ 3.402729] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 3.402808] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 3.761755] sda1 [ 3.762104] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.762126] Freeing unused kernel memory: 684k freed [ 3.762903] Write protecting the kernel text: 4932k [ 3.762969] Write protecting the kernel read-only data: 1976k [ 3.798080] udev[86]: starting version 163 [ 3.976550] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k6-NAPI [ 3.976557] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 3.976637] e1000 0000:02:01.0: power state changed by ACPI to D0 [ 3.976654] e1000 0000:02:01.0: power state changed by ACPI to D0 [ 3.976667] e1000 0000:02:01.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 3.976683] e1000 0000:02:01.0: setting latency timer to 64 [ 4.040227] Linux agpgart interface v0.103 [ 4.052485] Floppy drive(s): fd0 is 1.44M [ 4.065289] agpgart-intel 0000:00:00.0: Intel 865 Chipset [ 4.083430] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:02/LNXVIDEO:00/input/input4 [ 4.083532] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 4.087633] firewire_ohci 0000:03:01.1: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 4.093950] FDC 0 is a National Semiconductor PC87306 [ 4.100560] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xe8000000 [ 4.126457] [drm] Initialized drm 1.1.0 20060810 [ 4.140084] firewire_ohci: Added fw-ohci device 0000:03:01.1, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2 [ 4.183538] [drm] radeon defaulting to kernel modesetting. [ 4.183544] [drm] radeon kernel modesetting enabled. [ 4.183628] radeon 0000:01:00.0: power state changed by ACPI to D0 [ 4.183641] radeon 0000:01:00.0: power state changed by ACPI to D0 [ 4.183652] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 4.387703] [drm] initializing kernel modesetting (RV350 0x1002:0x4E50). [ 4.387863] [drm] register mmio base: 0xE0100000 [ 4.387866] [drm] register mmio size: 65536 [ 4.389097] agpgart-intel 0000:00:00.0: AGP 3.0 bridge [ 4.389118] agpgart-intel 0000:00:00.0: putting AGP V3 device into 8x mode [ 4.389171] radeon 0000:01:00.0: putting AGP V3 device into 8x mode [ 4.389192] radeon 0000:01:00.0: GTT: 128M 0xE8000000 - 0xEFFFFFFF [ 4.389197] [drm] Generation 2 PCI interface, using max accessible memory [ 4.389202] radeon 0000:01:00.0: VRAM: 128M 0xF0000000 - 0xF7FFFFFF (128M used) [ 4.389238] [drm] radeon: irq initialized. [ 4.389417] [drm] Detected VRAM RAM=128M, BAR=128M [ 4.389424] [drm] RAM width 128bits DDR [ 4.389533] [TTM] Zone kernel: Available graphics memory: 443212 kiB. [ 4.389536] [TTM] Zone highmem: Available graphics memory: 512560 kiB. [ 4.389539] [TTM] Initializing pool allocator. [ 4.389563] [drm] radeon: 128M of VRAM memory ready [ 4.389566] [drm] radeon: 128M of GTT memory ready. [ 4.389615] [drm] radeon: 1 quad pipes, 1 Z pipes initialized. [ 4.389681] [drm] Loading R300 Microcode [ 4.394656] [drm] radeon: ring at 0x00000000E8000000 [ 4.394676] [drm] ring test succeeded in 0 usecs [ 4.395121] [drm] radeon: ib pool ready. [ 4.395232] [drm] ib test succeeded in 0 usecs [ 4.395405] [drm] Panel ID String: LPL [ 4.395411] [drm] Panel Size 1680x1050 [ 4.395497] [drm] Default TV standard: NTSC [ 4.395500] [drm] 27.000000000 MHz TV ref clk [ 4.395505] [drm] Default TV standard: NTSC [ 4.395509] [drm] 27.000000000 MHz TV ref clk [ 4.395568] [drm] Radeon Display Connectors [ 4.395572] [drm] Connector 0: [ 4.395576] [drm] VGA [ 4.395581] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60 [ 4.395584] [drm] Encoders: [ 4.395587] [drm] CRT1: INTERNAL_DAC1 [ 4.395590] [drm] Connector 1: [ 4.395592] [drm] LVDS [ 4.395594] [drm] Encoders: [ 4.395597] [drm] LCD1: INTERNAL_LVDS [ 4.395600] [drm] Connector 2: [ 4.395603] [drm] S-video [ 4.395605] [drm] Encoders: [ 4.395608] [drm] TV1: INTERNAL_DAC2 [ 4.464420] [drm] fb mappable at 0xF0040000 [ 4.464424] [drm] vram apper at 0xF0000000 [ 4.464426] [drm] size 7057408 [ 4.464428] [drm] fb depth is 24 [ 4.464430] [drm] pitch is 6720 [ 4.528618] Console: switching to colour frame buffer device 210x65 [ 4.560346] fb0: radeondrmfb frame buffer device [ 4.560349] drm: registered panic notifier [ 4.560355] Slow work thread pool: Starting up [ 4.560447] Slow work thread pool: Ready [ 4.560459] [drm] Initialized radeon 2.5.0 20080528 for 0000:01:00.0 on minor 0 [ 4.640161] firewire_core: created device fw0: GUID 00e0b8060100d5b2, S400 [ 4.658548] e1000 0000:02:01.0: eth0: (PCI:33MHz:32-bit) 00:e0:b8:5c:cd:53 [ 4.658559] e1000 0000:02:01.0: eth0: Intel(R) PRO/1000 Network Connection [ 7.988260] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 7.988264] ata1.00: BMDMA stat 0x5 [ 7.988269] ata1.00: failed command: READ DMA [ 7.988276] ata1.00: cmd c8/00:08:3f:00:60/00:00:00:00:00/e0 tag 0 dma 4096 in [ 7.988277] res 51/40:08:3f:00:60/00:00:00:00:00/e0 Emask 0x9 (media error) [ 7.988280] ata1.00: status: { DRDY ERR } [ 7.988283] ata1.00: error: { UNC } [ 8.012540] ata1.00: configured for UDMA/100 [ 8.012555] ata1: EH complete [ 12.078221] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 12.078224] ata1.00: BMDMA stat 0x5 [ 12.078228] ata1.00: failed command: READ DMA [ 12.078235] ata1.00: cmd c8/00:08:3f:00:60/00:00:00:00:00/e0 tag 0 dma 4096 in [ 12.078237] res 51/40:08:3f:00:60/00:00:00:00:00/e0 Emask 0x9 (media error) [ 12.078240] ata1.00: status: { DRDY ERR } [ 12.078242] ata1.00: error: { UNC } [ 12.100565] ata1.00: configured for UDMA/100 [ 12.100576] ata1: EH complete [ 15.980254] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 15.980258] ata1.00: BMDMA stat 0x5 [ 15.980264] ata1.00: failed command: READ DMA [ 15.980271] ata1.00: cmd c8/00:08:3f:00:60/00:00:00:00:00/e0 tag 0 dma 4096 in [ 15.980272] res 51/40:08:3f:00:60/00:00:00:00:00/e0 Emask 0x9 (media error) [ 15.980275] ata1.00: status: { DRDY ERR } [ 15.980278] ata1.00: error: { UNC } [ 16.004574] ata1.00: configured for UDMA/100 [ 16.004592] ata1: EH complete [ 19.904359] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 19.904363] ata1.00: BMDMA stat 0x5 [ 19.904366] ata1.00: failed command: READ DMA [ 19.904373] ata1.00: cmd c8/00:08:3f:00:60/00:00:00:00:00/e0 tag 0 dma 4096 in [ 19.904374] res 51/40:08:3f:00:60/00:00:00:00:00/e0 Emask 0x9 (media error) [ 19.904377] ata1.00: status: { DRDY ERR } [ 19.904379] ata1.00: error: { UNC } [ 19.928565] ata1.00: configured for UDMA/100 [ 19.928577] ata1: EH complete [ 23.784258] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 23.784262] ata1.00: BMDMA stat 0x5 [ 23.784265] ata1.00: failed command: READ DMA [ 23.784272] ata1.00: cmd c8/00:08:3f:00:60/00:00:00:00:00/e0 tag 0 dma 4096 in [ 23.784273] res 51/40:08:3f:00:60/00:00:00:00:00/e0 Emask 0x9 (media error) [ 23.784276] ata1.00: status: { DRDY ERR } [ 23.784279] ata1.00: error: { UNC } [ 23.808576] ata1.00: configured for UDMA/100 [ 23.808586] ata1: EH complete [ 27.675190] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 27.675194] ata1.00: BMDMA stat 0x5 [ 27.675198] ata1.00: failed command: READ DMA [ 27.675204] ata1.00: cmd c8/00:08:3f:00:60/00:00:00:00:00/e0 tag 0 dma 4096 in [ 27.675206] res 51/40:08:3f:00:60/00:00:00:00:00/e0 Emask 0x9 (media error) [ 27.675209] ata1.00: status: { DRDY ERR } [ 27.675211] ata1.00: error: { UNC } [ 27.697554] ata1.00: configured for UDMA/100 [ 27.697573] sd 0:0:0:0: [sda] Unhandled sense code [ 27.697576] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 27.697581] sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor] [ 27.697587] Descriptor sense data with sense descriptors (in hex): [ 27.697590] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 27.697605] 00 60 00 3f [ 27.697611] sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed [ 27.697618] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 00 60 00 3f 00 00 08 00 [ 27.697631] end_request: I/O error, dev sda, sector 6291519 [ 27.697637] Buffer I/O error on device sda1, logical block 6291456 [ 27.697642] Buffer I/O error on device sda1, logical block 6291457 [ 27.697645] Buffer I/O error on device sda1, logical block 6291458 [ 27.697648] Buffer I/O error on device sda1, logical block 6291459 [ 27.697652] Buffer I/O error on device sda1, logical block 6291460 [ 27.697655] Buffer I/O error on device sda1, logical block 6291461 [ 27.697659] Buffer I/O error on device sda1, logical block 6291462 [ 27.697662] Buffer I/O error on device sda1, logical block 6291463 [ 27.697698] ata1: EH complete [ 31.544024] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 31.544028] ata1.00: BMDMA stat 0x5 [ 31.544032] ata1.00: failed command: READ DMA [ 31.544038] ata1.00: cmd c8/00:08:3f:00:60/00:00:00:00:00/e0 tag 0 dma 4096 in [ 31.544040] res 51/40:08:3f:00:60/00:00:00:00:00/e0 Emask 0x9 (media error) [ 31.544043] ata1.00: status: { DRDY ERR } [ 31.544045] ata1.00: error: { UNC } [ 31.569554] ata1.00: configured for UDMA/100 [ 31.569568] ata1: EH complete [ 35.434928] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 35.434931] ata1.00: BMDMA stat 0x5 [ 35.434935] ata1.00: failed command: READ DMA [ 35.434942] ata1.00: cmd c8/00:08:3f:00:60/00:00:00:00:00/e0 tag 0 dma 4096 in [ 35.434944] res 51/40:08:3f:00:60/00:00:00:00:00/e0 Emask 0x9 (media error) [ 35.434947] ata1.00: status: { DRDY ERR } [ 35.434950] ata1.00: error: { UNC } [ 35.456567] ata1.00: configured for UDMA/100 [ 35.456579] ata1: EH complete [ 39.524800] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 39.524803] ata1.00: BMDMA stat 0x5 [ 39.524807] ata1.00: failed command: READ DMA [ 39.524813] ata1.00: cmd c8/00:08:3f:00:60/00:00:00:00:00/e0 tag 0 dma 4096 in [ 39.524815] res 51/40:08:3f:00:60/00:00:00:00:00/e0 Emask 0x9 (media error) [ 39.524818] ata1.00: status: { DRDY ERR } [ 39.524821] ata1.00: error: { UNC } [ 39.548571] ata1.00: configured for UDMA/100 [ 39.548582] ata1: EH complete [ 43.415706] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 43.415709] ata1.00: BMDMA stat 0x5 [ 43.415713] ata1.00: failed command: READ DMA [ 43.415719] ata1.00: cmd c8/00:08:3f:00:60/00:00:00:00:00/e0 tag 0 dma 4096 in [ 43.415720] res 51/40:08:3f:00:60/00:00:00:00:00/e0 Emask 0x9 (media error) [ 43.415724] ata1.00: status: { DRDY ERR } [ 43.415726] ata1.00: error: { UNC } [ 43.436561] ata1.00: configured for UDMA/100 [ 43.436572] ata1: EH complete [ 47.273446] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 47.273449] ata1.00: BMDMA stat 0x5 [ 47.273453] ata1.00: failed command: READ DMA [ 47.273459] ata1.00: cmd c8/00:08:3f:00:60/00:00:00:00:00/e0 tag 0 dma 4096 in [ 47.273461] res 51/40:08:3f:00:60/00:00:00:00:00/e0 Emask 0x9 (media error) [ 47.273464] ata1.00: status: { DRDY ERR } [ 47.273466] ata1.00: error: { UNC } [ 47.296562] ata1.00: configured for UDMA/100 [ 47.296575] ata1: EH complete [ 51.175393] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 51.175397] ata1.00: BMDMA stat 0x5 [ 51.175400] ata1.00: failed command: READ DMA [ 51.175407] ata1.00: cmd c8/00:08:3f:00:60/00:00:00:00:00/e0 tag 0 dma 4096 in [ 51.175408] res 51/40:08:3f:00:60/00:00:00:00:00/e0 Emask 0x9 (media error) [ 51.175411] ata1.00: status: { DRDY ERR } [ 51.175414] ata1.00: error: { UNC } [ 51.196563] ata1.00: configured for UDMA/100 [ 51.196578] sd 0:0:0:0: [sda] Unhandled sense code [ 51.196581] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 51.196586] sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor] [ 51.196592] Descriptor sense data with sense descriptors (in hex): [ 51.196595] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 51.196610] 00 60 00 3f [ 51.196616] sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed [ 51.196622] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 00 60 00 3f 00 00 08 00 [ 51.196636] end_request: I/O error, dev sda, sector 6291519 [ 51.196641] Buffer I/O error on device sda1, logical block 6291456 [ 51.196645] Buffer I/O error on device sda1, logical block 6291457 [ 51.196649] Buffer I/O error on device sda1, logical block 6291458 [ 51.196652] Buffer I/O error on device sda1, logical block 6291459 [ 51.196656] Buffer I/O error on device sda1, logical block 6291460 [ 51.196659] Buffer I/O error on device sda1, logical block 6291461 [ 51.196662] Buffer I/O error on device sda1, logical block 6291462 [ 51.196666] Buffer I/O error on device sda1, logical block 6291463 [ 51.196689] ata1: EH complete [ 54.561226] Btrfs loaded [ 54.584250] xor: automatically using best checksumming function: pIII_sse [ 54.601002] pIII_sse : 4328.000 MB/sec [ 54.601007] xor: using function: pIII_sse (4328.000 MB/sec) [ 54.604639] device-mapper: dm-raid45: initialized v0.2594b [ 58.658738] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 58.658743] ata1.00: BMDMA stat 0x5 [ 58.658748] ata1.00: failed command: READ DMA [ 58.658755] ata1.00: cmd c8/00:08:3f:00:60/00:00:00:00:00/e0 tag 0 dma 4096 in [ 58.658756] res 51/40:08:3f:00:60/00:00:00:00:00/e0 Emask 0x9 (media error) [ 58.658760] ata1.00: status: { DRDY ERR } [ 58.658762] ata1.00: error: { UNC } [ 58.680572] ata1.00: configured for UDMA/100 [ 58.680587] ata1: EH complete [ 62.571733] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 62.571736] ata1.00: BMDMA stat 0x5 [ 62.571741] ata1.00: failed command: READ DMA [ 62.571747] ata1.00: cmd c8/00:08:3f:00:60/00:00:00:00:00/e0 tag 0 dma 4096 in [ 62.571748] res 51/40:08:3f:00:60/00:00:00:00:00/e0 Emask 0x9 (media error) [ 62.571751] ata1.00: status: { DRDY ERR } [ 62.571754] ata1.00: error: { UNC } [ 62.593573] ata1.00: configured for UDMA/100 [ 62.593586] ata1: EH complete [ 66.506842] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 66.506846] ata1.00: BMDMA stat 0x5 [ 66.506850] ata1.00: failed command: READ DMA [ 66.506856] ata1.00: cmd c8/00:08:3f:00:60/00:00:00:00:00/e0 tag 0 dma 4096 in [ 66.506858] res 51/40:08:3f:00:60/00:00:00:00:00/e0 Emask 0x9 (media error) [ 66.506861] ata1.00: status: { DRDY ERR } [ 66.506863] ata1.00: error: { UNC } [ 66.529572] ata1.00: configured for UDMA/100 [ 66.529586] ata1: EH complete [ 70.574580] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 70.574584] ata1.00: BMDMA stat 0x5 [ 70.574588] ata1.00: failed command: READ DMA [ 70.574594] ata1.00: cmd c8/00:08:3f:00:60/00:00:00:00:00/e0 tag 0 dma 4096 in [ 70.574596] res 51/40:08:3f:00:60/00:00:00:00:00/e0 Emask 0x9 (media error) [ 70.574599] ata1.00: status: { DRDY ERR } [ 70.574602] ata1.00: error: { UNC } [ 70.597566] ata1.00: configured for UDMA/100 [ 70.597580] ata1: EH complete [ 74.487565] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 74.487568] ata1.00: BMDMA stat 0x5 [ 74.487572] ata1.00: failed command: READ DMA [ 74.487578] ata1.00: cmd c8/00:08:3f:00:60/00:00:00:00:00/e0 tag 0 dma 4096 in [ 74.487579] res 51/40:08:3f:00:60/00:00:00:00:00/e0 Emask 0x9 (media error) [ 74.487583] ata1.00: status: { DRDY ERR } [ 74.487585] ata1.00: error: { UNC } [ 74.508565] ata1.00: configured for UDMA/100 [ 74.508577] ata1: EH complete [ 78.422668] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 78.422672] ata1.00: BMDMA stat 0x5 [ 78.422677] ata1.00: failed command: READ DMA [ 78.422684] ata1.00: cmd c8/00:08:3f:00:60/00:00:00:00:00/e0 tag 0 dma 4096 in [ 78.422685] res 51/40:08:3f:00:60/00:00:00:00:00/e0 Emask 0x9 (media error) [ 78.422689] ata1.00: status: { DRDY ERR } [ 78.422691] ata1.00: error: { UNC } [ 78.444573] ata1.00: configured for UDMA/100 [ 78.444593] sd 0:0:0:0: [sda] Unhandled sense code [ 78.444596] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 78.444601] sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor] [ 78.444607] Descriptor sense data with sense descriptors (in hex): [ 78.444610] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 78.444625] 00 60 00 3f [ 78.444631] sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed [ 78.444638] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 00 60 00 3f 00 00 08 00 [ 78.444651] end_request: I/O error, dev sda, sector 6291519 [ 78.444657] Buffer I/O error on device sda1, logical block 6291456 [ 78.444661] Buffer I/O error on device sda1, logical block 6291457 [ 78.444665] Buffer I/O error on device sda1, logical block 6291458 [ 78.444668] Buffer I/O error on device sda1, logical block 6291459 [ 78.444671] Buffer I/O error on device sda1, logical block 6291460 [ 78.444675] Buffer I/O error on device sda1, logical block 6291461 [ 78.444678] Buffer I/O error on device sda1, logical block 6291462 [ 78.444681] Buffer I/O error on device sda1, logical block 6291463 [ 78.444718] ata1: EH complete [ 82.346693] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 82.346697] ata1.00: BMDMA stat 0x5 [ 82.346701] ata1.00: failed command: READ DMA [ 82.346708] ata1.00: cmd c8/00:08:3f:00:60/00:00:00:00:00/e0 tag 0 dma 4096 in [ 82.346710] res 51/40:08:3f:00:60/00:00:00:00:00/e0 Emask 0x9 (media error) [ 82.346713] ata1.00: status: { DRDY ERR } [ 82.346716] ata1.00: error: { UNC } [ 82.369552] ata1.00: configured for UDMA/100 [ 82.369567] ata1: EH complete [ 86.259665] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 86.259669] ata1.00: BMDMA stat 0x5 [ 86.259673] ata1.00: failed command: READ DMA [ 86.259679] ata1.00: cmd c8/00:08:3f:00:60/00:00:00:00:00/e0 tag 0 dma 4096 in [ 86.259680] res 51/40:08:3f:00:60/00:00:00:00:00/e0 Emask 0x9 (media error) [ 86.259684] ata1.00: status: { DRDY ERR } [ 86.259686] ata1.00: error: { UNC } [ 86.281569] ata1.00: configured for UDMA/100 [ 86.281582] ata1: EH complete [ 90.371599] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 90.371603] ata1.00: BMDMA stat 0x5 [ 90.371606] ata1.00: failed command: READ DMA [ 90.371613] ata1.00: cmd c8/00:08:3f:00:60/00:00:00:00:00/e0 tag 0 dma 4096 in [ 90.371614] res 51/40:08:3f:00:60/00:00:00:00:00/e0 Emask 0x9 (media error) [ 90.371617] ata1.00: status: { DRDY ERR } [ 90.371620] ata1.00: error: { UNC } [ 90.392568] ata1.00: configured for UDMA/100 [ 90.392581] ata1: EH complete [ 94.240346] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 94.240349] ata1.00: BMDMA stat 0x5 [ 94.240353] ata1.00: failed command: READ DMA [ 94.240359] ata1.00: cmd c8/00:08:3f:00:60/00:00:00:00:00/e0 tag 0 dma 4096 in [ 94.240361] res 51/40:08:3f:00:60/00:00:00:00:00/e0 Emask 0x9 (media error) [ 94.240364] ata1.00: status: { DRDY ERR } [ 94.240366] ata1.00: error: { UNC } [ 94.265557] ata1.00: configured for UDMA/100 [ 94.265569] ata1: EH complete [ 98.164370] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 98.164374] ata1.00: BMDMA stat 0x5 [ 98.164378] ata1.00: failed command: READ DMA [ 98.164385] ata1.00: cmd c8/00:08:3f:00:60/00:00:00:00:00/e0 tag 0 dma 4096 in [ 98.164386] res 51/40:08:3f:00:60/00:00:00:00:00/e0 Emask 0x9 (media error) [ 98.164389] ata1.00: status: { DRDY ERR } [ 98.164392] ata1.00: error: { UNC } [ 98.188570] ata1.00: configured for UDMA/100 [ 98.188584] ata1: EH complete [ 102.033113] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 102.033117] ata1.00: BMDMA stat 0x5 [ 102.033121] ata1.00: failed command: READ DMA [ 102.033127] ata1.00: cmd c8/00:08:3f:00:60/00:00:00:00:00/e0 tag 0 dma 4096 in [ 102.033128] res 51/40:08:3f:00:60/00:00:00:00:00/e0 Emask 0x9 (media error) [ 102.033132] ata1.00: status: { DRDY ERR } [ 102.033134] ata1.00: error: { UNC } [ 102.056561] ata1.00: configured for UDMA/100 [ 102.056579] sd 0:0:0:0: [sda] Unhandled sense code [ 102.056582] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 102.056587] sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor] [ 102.056593] Descriptor sense data with sense descriptors (in hex): [ 102.056595] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 102.056611] 00 60 00 3f [ 102.056617] sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed [ 102.056623] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 00 60 00 3f 00 00 08 00 [ 102.056637] end_request: I/O error, dev sda, sector 6291519 [ 102.056642] Buffer I/O error on device sda1, logical block 6291456 [ 102.056646] Buffer I/O error on device sda1, logical block 6291457 [ 102.056650] Buffer I/O error on device sda1, logical block 6291458 [ 102.056653] Buffer I/O error on device sda1, logical block 6291459 [ 102.056657] Buffer I/O error on device sda1, logical block 6291460 [ 102.056660] Buffer I/O error on device sda1, logical block 6291461 [ 102.056663] Buffer I/O error on device sda1, logical block 6291462 [ 102.056667] Buffer I/O error on device sda1, logical block 6291463 [ 102.056692] ata1: EH complete [ 106.799423] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 106.799430] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current] [ 106.799437] ILI [ 106.799439] sr 1:0:0:0: [sr0] Add. Sense: Illegal mode for this track [ 106.799446] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 05 6a 50 00 00 02 00 [ 106.799460] end_request: I/O error, dev sr0, sector 1419584 [ 106.799465] Buffer I/O error on device sr0, logical block 177448 [ 107.919961] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 107.919966] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current] [ 107.919972] ILI [ 107.919974] sr 1:0:0:0: [sr0] Add. Sense: Illegal mode for this track [ 107.919981] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 05 6a 50 00 00 02 00 [ 107.919994] end_request: I/O error, dev sr0, sector 1419584 [ 107.919998] Buffer I/O error on device sr0, logical block 177448 [ 109.022125] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 109.022130] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current] [ 109.022136] ILI [ 109.022138] sr 1:0:0:0: [sr0] Add. Sense: Illegal mode for this track [ 109.022145] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 05 6a 50 00 00 02 00 [ 109.022158] end_request: I/O error, dev sr0, sector 1419584 [ 109.022162] Buffer I/O error on device sr0, logical block 177448 [ 110.183655] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 110.183661] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current] [ 110.183667] ILI [ 110.183669] sr 1:0:0:0: [sr0] Add. Sense: Illegal mode for this track [ 110.183676] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 05 6a 50 00 00 02 00 [ 110.183689] end_request: I/O error, dev sr0, sector 1419584 [ 110.183694] Buffer I/O error on device sr0, logical block 177448 [ 111.305974] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 111.305980] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current] [ 111.305986] ILI [ 111.305988] sr 1:0:0:0: [sr0] Add. Sense: Illegal mode for this track [ 111.305995] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 05 6a 50 00 00 02 00 [ 111.306008] end_request: I/O error, dev sr0, sector 1419584 [ 111.306012] Buffer I/O error on device sr0, logical block 177448 [ 112.429386] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 112.429392] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current] [ 112.429398] ILI [ 112.429400] sr 1:0:0:0: [sr0] Add. Sense: Illegal mode for this track [ 112.429407] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 05 6a 50 00 00 02 00 [ 112.429420] end_request: I/O error, dev sr0, sector 1419584 [ 112.429424] Buffer I/O error on device sr0, logical block 177448 [ 113.552554] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 113.552559] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current] [ 113.552565] ILI [ 113.552567] sr 1:0:0:0: [sr0] Add. Sense: Illegal mode for this track [ 113.552574] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 05 6a 50 00 00 02 00 [ 113.552588] end_request: I/O error, dev sr0, sector 1419584 [ 113.552592] Buffer I/O error on device sr0, logical block 177448 [ 114.825512] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 114.825519] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current] [ 114.825526] ILI [ 114.825528] sr 1:0:0:0: [sr0] Add. Sense: Illegal mode for this track [ 114.825534] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 05 6a 50 00 00 02 00 [ 114.825548] end_request: I/O error, dev sr0, sector 1419584 [ 114.825552] Buffer I/O error on device sr0, logical block 177448 [ 115.948673] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 115.948681] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current] [ 115.948689] ILI [ 115.948693] sr 1:0:0:0: [sr0] Add. Sense: Illegal mode for this track [ 115.948702] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 05 6a 50 00 00 02 00 [ 115.948721] end_request: I/O error, dev sr0, sector 1419584 [ 115.948727] Buffer I/O error on device sr0, logical block 177448 [ 117.071828] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 117.071833] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current] [ 117.071840] ILI [ 117.071842] sr 1:0:0:0: [sr0] Add. Sense: Illegal mode for this track [ 117.071848] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 05 6a 50 00 00 02 00 [ 117.071861] end_request: I/O error, dev sr0, sector 1419584 [ 117.071866] Buffer I/O error on device sr0, logical block 177448 [ 118.098869] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 118.174152] ISO 9660 Extensions: RRIP_1991A [ 118.402167] aufs 2-standalone.tree-35-rcN-20100705 [ 118.595817] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 177.043796] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 177.043801] ata1.00: BMDMA stat 0x5 [ 177.043806] ata1.00: failed command: READ DMA [ 177.043813] ata1.00: cmd c8/00:08:3f:00:60/00:00:00:00:00/e0 tag 0 dma 4096 in [ 177.043814] res 51/40:08:3f:00:60/00:00:00:00:00/e0 Emask 0x9 (media error) [ 177.043817] ata1.00: status: { DRDY ERR } [ 177.043820] ata1.00: error: { UNC } [ 177.065600] ata1.00: configured for UDMA/100 [ 177.065614] ata1: EH complete [ 180.956833] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 180.956837] ata1.00: BMDMA stat 0x5 [ 180.956841] ata1.00: failed command: READ DMA [ 180.956848] ata1.00: cmd c8/00:08:3f:00:60/00:00:00:00:00/e0 tag 0 dma 4096 in [ 180.956850] res 51/40:08:3f:00:60/00:00:00:00:00/e0 Emask 0x9 (media error) [ 180.956853] ata1.00: status: { DRDY ERR } [ 180.956856] ata1.00: error: { UNC } [ 180.980567] ata1.00: configured for UDMA/100 [ 180.980586] ata1: EH complete [ 184.858795] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 184.858799] ata1.00: BMDMA stat 0x5 [ 184.858804] ata1.00: failed command: READ DMA [ 184.858811] ata1.00: cmd c8/00:08:3f:00:60/00:00:00:00:00/e0 tag 0 dma 4096 in [ 184.858812] res 51/40:08:3f:00:60/00:00:00:00:00/e0 Emask 0x9 (media error) [ 184.858815] ata1.00: status: { DRDY ERR } [ 184.858818] ata1.00: error: { UNC } [ 184.880603] ata1.00: configured for UDMA/100 [ 184.880622] ata1: EH complete [ 188.771795] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 188.771799] ata1.00: BMDMA stat 0x5 [ 188.771804] ata1.00: failed command: READ DMA [ 188.771811] ata1.00: cmd c8/00:08:3f:00:60/00:00:00:00:00/e0 tag 0 dma 4096 in [ 188.771812] res 51/40:08:3f:00:60/00:00:00:00:00/e0 Emask 0x9 (media error) [ 188.771816] ata1.00: status: { DRDY ERR } [ 188.771818] ata1.00: error: { UNC } [ 188.793600] ata1.00: configured for UDMA/100 [ 188.793615] ata1: EH complete [ 192.673733] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 192.673737] ata1.00: BMDMA stat 0x5 [ 192.673741] ata1.00: failed command: READ DMA [ 192.673748] ata1.00: cmd c8/00:08:3f:00:60/00:00:00:00:00/e0 tag 0 dma 4096 in [ 192.673750] res 51/40:08:3f:00:60/00:00:00:00:00/e0 Emask 0x9 (media error) [ 192.673753] ata1.00: status: { DRDY ERR } [ 192.673756] ata1.00: error: { UNC } [ 192.696571] ata1.00: configured for UDMA/100 [ 192.696587] ata1: EH complete [ 196.564604] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 196.564608] ata1.00: BMDMA stat 0x5 [ 196.564613] ata1.00: failed command: READ DMA [ 196.564620] ata1.00: cmd c8/00:08:3f:00:60/00:00:00:00:00/e0 tag 0 dma 4096 in [ 196.564621] res 51/40:08:3f:00:60/00:00:00:00:00/e0 Emask 0x9 (media error) [ 196.564625] ata1.00: status: { DRDY ERR } [ 196.564627] ata1.00: error: { UNC } [ 196.589556] ata1.00: configured for UDMA/100 [ 196.589577] sd 0:0:0:0: [sda] Unhandled sense code [ 196.589580] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 196.589586] sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor] [ 196.589592] Descriptor sense data with sense descriptors (in hex): [ 196.589595] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 196.589611] 00 60 00 3f [ 196.589617] sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed [ 196.589623] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 00 60 00 3f 00 00 08 00 [ 196.589637] end_request: I/O error, dev sda, sector 6291519 [ 196.589643] Buffer I/O error on device sda1, logical block 6291456 [ 196.589647] Buffer I/O error on device sda1, logical block 6291457 [ 196.589651] Buffer I/O error on device sda1, logical block 6291458 [ 196.589654] Buffer I/O error on device sda1, logical block 6291459 [ 196.589658] Buffer I/O error on device sda1, logical block 6291460 [ 196.589661] Buffer I/O error on device sda1, logical block 6291461 [ 196.589665] Buffer I/O error on device sda1, logical block 6291462 [ 196.589668] Buffer I/O error on device sda1, logical block 6291463 [ 196.589706] ata1: EH complete [ 200.455469] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 200.455473] ata1.00: BMDMA stat 0x5 [ 200.455478] ata1.00: failed command: READ DMA [ 200.455485] ata1.00: cmd c8/00:08:3f:00:60/00:00:00:00:00/e0 tag 0 dma 4096 in [ 200.455486] res 51/40:08:3f:00:60/00:00:00:00:00/e0 Emask 0x9 (media error) [ 200.455490] ata1.00: status: { DRDY ERR } [ 200.455493] ata1.00: error: { UNC } [ 200.476567] ata1.00: configured for UDMA/100 [ 200.476587] ata1: EH complete [ 204.313158] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 204.313162] ata1.00: BMDMA stat 0x5 [ 204.313166] ata1.00: failed command: READ DMA [ 204.313173] ata1.00: cmd c8/00:08:3f:00:60/00:00:00:00:00/e0 tag 0 dma 4096 in [ 204.313174] res 51/40:08:3f:00:60/00:00:00:00:00/e0 Emask 0x9 (media error) [ 204.313178] ata1.00: status: { DRDY ERR } [ 204.313180] ata1.00: error: { UNC } [ 204.336572] ata1.00: configured for UDMA/100 [ 204.336591] ata1: EH complete [ 208.204018] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 208.204022] ata1.00: BMDMA stat 0x5 [ 208.204027] ata1.00: failed command: READ DMA [ 208.204034] ata1.00: cmd c8/00:08:3f:00:60/00:00:00:00:00/e0 tag 0 dma 4096 in [ 208.204035] res 51/40:08:3f:00:60/00:00:00:00:00/e0 Emask 0x9 (media error) [ 208.204038] ata1.00: status: { DRDY ERR } [ 208.204041] ata1.00: error: { UNC } [ 208.228573] ata1.00: configured for UDMA/100 [ 208.228589] ata1: EH complete [ 212.083799] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 212.083804] ata1.00: BMDMA stat 0x5 [ 212.083808] ata1.00: failed command: READ DMA [ 212.083815] ata1.00: cmd c8/00:08:3f:00:60/00:00:00:00:00/e0 tag 0 dma 4096 in [ 212.083816] res 51/40:08:3f:00:60/00:00:00:00:00/e0 Emask 0x9 (media error) [ 212.083820] ata1.00: status: { DRDY ERR } [ 212.083822] ata1.00: error: { UNC } [ 212.104563] ata1.00: configured for UDMA/100 [ 212.104579] ata1: EH complete [ 215.985693] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 215.985697] ata1.00: BMDMA stat 0x5 [ 215.985702] ata1.00: failed command: READ DMA [ 215.985709] ata1.00: cmd c8/00:08:3f:00:60/00:00:00:00:00/e0 tag 0 dma 4096 in [ 215.985710] res 51/40:08:3f:00:60/00:00:00:00:00/e0 Emask 0x9 (media error) [ 215.985714] ata1.00: status: { DRDY ERR } [ 215.985716] ata1.00: error: { UNC } [ 216.008550] ata1.00: configured for UDMA/100 [ 216.008566] ata1: EH complete [ 219.865469] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 219.865473] ata1.00: BMDMA stat 0x5 [ 219.865477] ata1.00: failed command: READ DMA [ 219.865484] ata1.00: cmd c8/00:08:3f:00:60/00:00:00:00:00/e0 tag 0 dma 4096 in [ 219.865485] res 51/40:08:3f:00:60/00:00:00:00:00/e0 Emask 0x9 (media error) [ 219.865488] ata1.00: status: { DRDY ERR } [ 219.865491] ata1.00: error: { UNC } [ 219.889567] ata1.00: configured for UDMA/100 [ 219.889587] sd 0:0:0:0: [sda] Unhandled sense code [ 219.889590] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 219.889595] sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor] [ 219.889601] Descriptor sense data with sense descriptors (in hex): [ 219.889604] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 219.889619] 00 60 00 3f [ 219.889625] sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed [ 219.889632] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 00 60 00 3f 00 00 08 00 [ 219.889645] end_request: I/O error, dev sda, sector 6291519 [ 219.889651] Buffer I/O error on device sda1, logical block 6291456 [ 219.889656] Buffer I/O error on device sda1, logical block 6291457 [ 219.889659] Buffer I/O error on device sda1, logical block 6291458 [ 219.889663] Buffer I/O error on device sda1, logical block 6291459 [ 219.889666] Buffer I/O error on device sda1, logical block 6291460 [ 219.889669] Buffer I/O error on device sda1, logical block 6291461 [ 219.889673] Buffer I/O error on device sda1, logical block 6291462 [ 219.889676] Buffer I/O error on device sda1, logical block 6291463 [ 219.889704] ata1: EH complete [ 234.055667] udev[1142]: starting version 163 [ 237.416699] intel_rng: FWH not detected [ 237.505704] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 238.218649] Synaptics Touchpad, model: 1, fw: 5.9, id: 0xf6eb3, caps: 0xa44713/0xc0000/0x0 [ 238.261287] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5 [ 238.267372] parport_pc 00:08: reported by Plug and Play ACPI [ 238.267436] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 239.021221] yenta_cardbus 0000:03:01.0: CardBus bridge found [107b:0603] [ 239.021255] yenta_cardbus 0000:03:01.0: Using CSCINT to route CSC interrupts to PCI [ 239.021261] yenta_cardbus 0000:03:01.0: Routing CardBus interrupts to PCI [ 239.021269] yenta_cardbus 0000:03:01.0: TI: mfunc 0x011c1112, devctl 0x64 [ 239.257565] yenta_cardbus 0000:03:01.0: ISA IRQ mask 0x0c38, PCI irq 17 [ 239.257571] yenta_cardbus 0000:03:01.0: Socket status: 30000020 [ 239.257577] pci_bus 0000:03: Raising subordinate bus# of parent bus (#03) from #03 to #07 [ 239.257595] yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge window: [io 0x5000-0x5fff] [ 239.257601] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x5000-0x5fff: excluding 0x5000-0x50ff 0x5400-0x54ff [ 239.263589] yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge window: [mem 0xe0300000-0xe03fffff] [ 239.263595] pcmcia_socket pcmcia_socket0: cs: memory probe 0xe0300000-0xe03fffff: excluding 0xe0300000-0xe030ffff [ 239.263614] yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge window: [mem 0x40000000-0x43ffffff pref] [ 239.263618] pcmcia_socket pcmcia_socket0: cs: memory probe 0x40000000-0x43ffffff: excluding 0x40000000-0x43ffffff [ 239.682642] ppdev: user-space parallel port driver [ 240.152037] pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0 [ 240.152079] pci 0000:04:00.0: reg 10: [mem 0x00000000-0x0000ffff] [ 240.152157] pci 0000:04:00.0: BAR 0: assigned [mem 0x48000000-0x4800ffff] [ 240.152165] pci 0000:04:00.0: BAR 0: set to [mem 0x48000000-0x4800ffff] (PCI address [0x48000000-0x4800ffff] [ 241.019643] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x1c0-0x1cf 0x1f0-0x1f7 0x370-0x37f [ 241.021547] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3f7 0x4d0-0x4d7 [ 241.022345] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean. [ 241.023011] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean. [ 241.023743] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xc7fff 0xd0000-0xd3fff 0xdc000-0xfffff [ 241.023832] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean. [ 241.023919] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: clean. [ 241.024012] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. [ 241.723262] cfg80211: Calling CRDA to update world regulatory domain [ 241.933736] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 241.933814] Intel ICH 0000:00:1f.5: setting latency timer to 64 [ 242.764030] intel8x0_measure_ac97_clock: measured 54247 usecs (2614 samples) [ 242.764036] intel8x0: clocking to 48000 [ 242.869452] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 243.216314] ath5k 0000:04:00.0: enabling device (0000 -> 0002) [ 243.216328] ath5k 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 243.216871] ath5k 0000:04:00.0: registered as 'phy0' [ 243.658451] cfg80211: World regulatory domain updated: [ 243.658458] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 243.658463] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 243.658467] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 243.658471] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 243.658475] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 243.658479] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 243.692566] ath: EEPROM regdomain: 0x10 [ 243.692570] ath: EEPROM indicates we should expect a direct regpair map [ 243.692574] ath: Country alpha2 being used: CO [ 243.692576] ath: Regpair used: 0x10 [ 244.457588] phy0: Selected rate control algorithm 'minstrel' [ 244.458636] ath5k phy0: Atheros AR5213A chip found (MAC: 0x59, PHY: 0x43) [ 244.458645] ath5k phy0: RF5112B multiband radio found (0x36) [ 244.459143] cfg80211: Calling CRDA for country: CO [ 244.472731] cfg80211: Regulatory domain changed to country: CO [ 244.472737] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 244.472742] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 244.472747] (5170000 KHz - 5250000 KHz @ 20000 KHz), (300 mBi, 1700 mBm) [ 244.472752] (5250000 KHz - 5330000 KHz @ 20000 KHz), (300 mBi, 2300 mBm) [ 244.472757] (5735000 KHz - 5835000 KHz @ 20000 KHz), (300 mBi, 3000 mBm) [ 244.508321] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 245.122934] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 245.122939] ata1.00: BMDMA stat 0x5 [ 245.122944] ata1.00: failed command: READ DMA [ 245.122952] ata1.00: cmd c8/00:08:3f:00:60/00:00:00:00:00/e0 tag 0 dma 4096 in [ 245.122953] res 51/40:08:3f:00:60/00:00:00:00:00/e0 Emask 0x9 (media error) [ 245.122957] ata1.00: status: { DRDY ERR } [ 245.122959] ata1.00: error: { UNC } [ 245.145581] ata1.00: configured for UDMA/100 [ 245.145600] ata1: EH complete [ 248.991712] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 248.991718] ata1.00: BMDMA stat 0x5 [ 248.991723] ata1.00: failed command: READ DMA [ 248.991730] ata1.00: cmd c8/00:08:3f:00:60/00:00:00:00:00/e0 tag 0 dma 4096 in [ 248.991732] res 51/40:08:3f:00:60/00:00:00:00:00/e0 Emask 0x9 (media error) [ 248.991735] ata1.00: status: { DRDY ERR } [ 248.991738] ata1.00: error: { UNC } [ 249.012557] ata1.00: configured for UDMA/100 [ 249.012575] ata1: EH complete