[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-24-generic (buildd@rothera) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #39-Ubuntu SMP Wed Jul 28 06:07:29 UTC 2010 (Ubuntu 2.6.32-24.39-generic 2.6.32.15+drm33.5) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) [ 0.000000] BIOS-e820: 000000001fff0000 - 000000001fffec00 (ACPI data) [ 0.000000] BIOS-e820: 000000001fffec00 - 0000000020000000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.3 present. [ 0.000000] last_pfn = 0x1fff0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CBFFF write-protect [ 0.000000] CC000-DFFFF uncachable [ 0.000000] E0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FE0000000 write-back [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] PAT not supported by CPU. [ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009f800 (usable) [ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000001fff0000 (usable) [ 0.000000] modified: 000000001fff0000 - 000000001fffec00 (ACPI data) [ 0.000000] modified: 000000001fffec00 - 0000000020000000 (ACPI NVS) [ 0.000000] modified: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-000000001fff0000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 001fc00000 page 2M [ 0.000000] 001fc00000 - 001fff0000 page 4k [ 0.000000] kernel direct mapping tables up to 1fff0000 @ 7000-c000 [ 0.000000] RAMDISK: 173a7000 - 18033a10 [ 0.000000] ACPI: RSDP 000f7120 00014 (v00 PTLTD ) [ 0.000000] ACPI: RSDT 1fff4c5d 0002C (v01 PTLTD RSDT 06041160 LTP 00000000) [ 0.000000] ACPI: FACP 1fffeb65 00074 (v01 IBM TP-T21 06041160 00000000) [ 0.000000] ACPI: DSDT 1fff4c89 09EDC (v01 IBM TP-T21 06041160 MSFT 0100000C) [ 0.000000] ACPI: FACS 1ffff000 00040 [ 0.000000] ACPI: BOOT 1fffebd9 00027 (v01 PTLTD $SBFTBL$ 06041160 LTP 00000001) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 511MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 1fff0000 [ 0.000000] low ram: 0 - 1fff0000 [ 0.000000] node 0 low ram: 00000000 - 1fff0000 [ 0.000000] node 0 bootmap 00008000 - 0000c000 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 001fff0000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008dbeb8] TEXT DATA BSS ==> [0000100000 - 00008dbeb8] [ 0.000000] #4 [00173a7000 - 0018033a10] RAMDISK ==> [00173a7000 - 0018033a10] [ 0.000000] #5 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] [ 0.000000] #6 [00008dc000 - 00008df0d9] BRK ==> [00008dc000 - 00008df0d9] [ 0.000000] #7 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] [ 0.000000] #8 [0000008000 - 000000c000] BOOTMAP ==> [0000008000 - 000000c000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x0001fff0 [ 0.000000] HighMem 0x0001fff0 -> 0x0001fff0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000002 [ 0.000000] 0: 0x00000006 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0001fff0 [ 0.000000] On node 0 totalpages: 130955 [ 0.000000] free_area_init_node: node 0, pgdat c0798780, node_mem_map c1001000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3963 pages, LIFO batch:0 [ 0.000000] Normal zone: 992 pages used for memmap [ 0.000000] Normal zone: 125968 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic" [ 0.000000] APIC: disable apic facility [ 0.000000] nr_irqs_gsi: 16 [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 20000000 (gap: 20000000:dff80000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c1800000 s36056 r0 d21288 u4194304 [ 0.000000] pcpu-alloc: s36056 r0 d21288 u4194304 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129931 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-24-generic root=UUID=480391dc-cd66-4729-b8dd-0b8ffc3bde73 ro quiet splash [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 2621120 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (00000000:00000000) [ 0.000000] Memory: 495436k/524224k available (4679k kernel code, 28072k reserved, 2116k data, 660k init, 0k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xe07f0000 - 0xff7fe000 ( 496 MB) [ 0.000000] lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB) [ 0.000000] .init : 0xc07a3000 - 0xc0848000 ( 660 kB) [ 0.000000] .data : 0xc0591d43 - 0xc07a2e88 (2116 kB) [ 0.000000] .text : 0xc0100000 - 0xc0591d43 (4679 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:256 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 995.550 MHz processor. [ 0.012010] Calibrating delay loop (skipped), value calculated using timer frequency.. 1991.10 BogoMIPS (lpj=3982200) [ 0.012060] Security Framework initialized [ 0.012132] AppArmor: AppArmor initialized [ 0.012155] Mount-cache hash table entries: 512 [ 0.012477] Initializing cgroup subsys ns [ 0.012488] Initializing cgroup subsys cpuacct [ 0.012499] Initializing cgroup subsys memory [ 0.012523] Initializing cgroup subsys devices [ 0.012531] Initializing cgroup subsys freezer [ 0.012537] Initializing cgroup subsys net_cls [ 0.012593] CPU: L1 I cache: 16K, L1 D cache: 16K [ 0.012601] CPU: L2 cache: 256K [ 0.012614] mce: CPU supports 5 MCE banks [ 0.012651] Performance Events: [ 0.012658] no APIC, boot with the "lapic" boot parameter to force-enable it. [ 0.012664] no hardware sampling interrupt available. [ 0.012670] p6 PMU driver. [ 0.012702] ... version: 0 [ 0.012707] ... bit width: 32 [ 0.012712] ... generic registers: 2 [ 0.012718] ... value mask: 00000000ffffffff [ 0.012723] ... max period: 000000007fffffff [ 0.012729] ... fixed-purpose events: 0 [ 0.012734] ... event mask: 0000000000000003 [ 0.012746] Checking 'hlt' instruction... OK. [ 0.029324] SMP alternatives: switching to UP code [ 0.042197] Freeing SMP alternatives: 19k freed [ 0.042266] ACPI: Core revision 20090903 [ 0.065471] ACPI: setting ELCR to 0200 (from 0800) [ 0.068031] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.068044] ftrace: allocating 21780 entries in 43 pages [ 0.076307] Enabling APIC mode: Flat. Using 0 I/O APICs [ 0.076323] weird, boot CPU (#0) not listed by the BIOS. [ 0.076329] SMP motherboard not detected. [ 0.076337] Local APIC not detected. Using dummy APIC emulation. [ 0.076342] SMP disabled [ 0.077142] Brought up 1 CPUs [ 0.077157] Total of 1 processors activated (1991.10 BogoMIPS). [ 0.080107] CPU0 attaching NULL sched-domain. [ 0.080484] devtmpfs: initialized [ 0.081511] regulator: core version 0.5 [ 0.081546] Time: 0:36:36 Date: 08/08/10 [ 0.081694] NET: Registered protocol family 16 [ 0.082016] EISA bus registered [ 0.082050] ACPI: bus type pci registered [ 0.082656] PCI: PCI BIOS revision 2.10 entry at 0xfd94f, last bus=7 [ 0.082663] PCI: Using configuration type 1 for base access [ 0.085473] bio: create slab at 0 [ 0.087599] ACPI: EC: Look up EC in DSDT [ 0.479728] ACPI: Interpreter enabled [ 0.479750] ACPI: (supports S0 S1 S3 S4 S5) [ 0.479816] ACPI: Using PIC for interrupt routing [ 0.697700] ACPI: EC: GPE = 0x9, I/O: command/status = 0x66, data = 0x62 [ 0.697882] ACPI: Power Resource [PSER] (off) [ 0.697975] ACPI: Power Resource [PSIO] (on) [ 0.908967] ACPI: ACPI Dock Station Driver: 3 docks/bays found [ 0.909049] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.909157] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xf8000000-0xfbffffff] [ 0.909272] pci 0000:00:02.0: reg 10 32bit mmio: [0x50000000-0x50000fff] [ 0.909297] pci 0000:00:02.0: supports D1 D2 [ 0.909304] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.909313] pci 0000:00:02.0: PME# disabled [ 0.909357] pci 0000:00:02.1: reg 10 32bit mmio: [0x50100000-0x50100fff] [ 0.909380] pci 0000:00:02.1: supports D1 D2 [ 0.909386] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.909395] pci 0000:00:02.1: PME# disabled [ 0.909444] pci 0000:00:03.0: reg 10 io port: [0x1800-0x18ff] [ 0.909456] pci 0000:00:03.0: reg 14 32bit mmio: [0xe8101400-0xe810147f] [ 0.909468] pci 0000:00:03.0: reg 18 32bit mmio: [0xe8101000-0xe810107f] [ 0.909491] pci 0000:00:03.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] [ 0.909514] pci 0000:00:03.0: supports D1 D2 [ 0.909520] pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.909528] pci 0000:00:03.0: PME# disabled [ 0.909569] pci 0000:00:03.1: reg 10 io port: [0x2000-0x20ff] [ 0.909580] pci 0000:00:03.1: reg 14 32bit mmio: [0xe8101c00-0xe8101cff] [ 0.909592] pci 0000:00:03.1: reg 18 32bit mmio: [0xe8101800-0xe810187f] [ 0.909630] pci 0000:00:03.1: supports D2 [ 0.909636] pci 0000:00:03.1: PME# supported from D0 D2 D3hot D3cold [ 0.909644] pci 0000:00:03.1: PME# disabled [ 0.909703] pci 0000:00:05.0: reg 10 32bit mmio: [0xe8100000-0xe8100fff] [ 0.909715] pci 0000:00:05.0: reg 14 32bit mmio: [0xe8000000-0xe80fffff] [ 0.909758] pci 0000:00:05.0: supports D1 D2 [ 0.909869] pci 0000:00:07.1: reg 20 io port: [0x1c00-0x1c0f] [ 0.909938] pci 0000:00:07.2: reg 20 io port: [0x1c20-0x1c3f] [ 0.910024] pci 0000:00:07.3: quirk: region 1000-103f claimed by PIIX4 ACPI [ 0.910033] pci 0000:00:07.3: quirk: region 1040-104f claimed by PIIX4 SMB [ 0.910044] pci 0000:00:07.3: PIIX4 devres C PIO at 15e8-15ef [ 0.910052] pci 0000:00:07.3: PIIX4 devres I PIO at 03f0-03f7 [ 0.910061] pci 0000:00:07.3: PIIX4 devres J PIO at 002e-002f [ 0.910157] pci 0000:01:00.0: reg 10 32bit mmio: [0xf0000000-0xf7ffffff] [ 0.910187] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x00ffff] [ 0.910212] pci 0000:01:00.0: supports D1 D2 [ 0.910262] pci 0000:00:01.0: bridge 32bit mmio: [0xf0000000-0xf7ffffff] [ 0.910312] pci_bus 0000:00: on NUMA node 0 [ 0.910326] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.910471] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 0.921207] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) [ 0.921612] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) [ 0.922010] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) [ 0.922409] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) [ 0.922754] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.922762] vgaarb: loaded [ 0.923129] SCSI subsystem initialized [ 0.923353] libata version 3.00 loaded. [ 0.923575] usbcore: registered new interface driver usbfs [ 0.923611] usbcore: registered new interface driver hub [ 0.923691] usbcore: registered new device driver usb [ 0.924114] ACPI: WMI: Mapper loaded [ 0.924120] PCI: Using ACPI for IRQ routing [ 0.924601] NetLabel: Initializing [ 0.924607] NetLabel: domain hash size = 128 [ 0.924611] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.924668] NetLabel: unlabeled traffic allowed by default [ 0.924784] Switching to clocksource tsc [ 0.929441] AppArmor: AppArmor Filesystem Enabled [ 0.929515] pnp: PnP ACPI init [ 0.929573] ACPI: bus type pnp registered [ 1.039324] pnp: PnP ACPI: found 15 devices [ 1.039334] ACPI: ACPI bus type pnp unregistered [ 1.039344] PnPBIOS: Disabled by ACPI PNP [ 1.039385] system 00:00: iomem range 0x0-0x9ffff could not be reserved [ 1.039394] system 00:00: iomem range 0xc0000-0xc3fff could not be reserved [ 1.039403] system 00:00: iomem range 0xc4000-0xc7fff could not be reserved [ 1.039411] system 00:00: iomem range 0xc8000-0xcbfff could not be reserved [ 1.039419] system 00:00: iomem range 0xcc000-0xcffff could not be reserved [ 1.039427] system 00:00: iomem range 0xe0000-0xe3fff could not be reserved [ 1.039436] system 00:00: iomem range 0xe4000-0xe7fff could not be reserved [ 1.039444] system 00:00: iomem range 0xe8000-0xebfff could not be reserved [ 1.039452] system 00:00: iomem range 0xec000-0xeffff could not be reserved [ 1.039460] system 00:00: iomem range 0xf0000-0xfffff could not be reserved [ 1.039468] system 00:00: iomem range 0x100000-0x1fffffff could not be reserved [ 1.039478] system 00:00: iomem range 0xfff80000-0xffffffff has been reserved [ 1.039500] system 00:02: ioport range 0x1000-0x103f has been reserved [ 1.039508] system 00:02: ioport range 0x1040-0x104f has been reserved [ 1.039516] system 00:02: ioport range 0xfe00-0xfe0f has been reserved [ 1.039537] system 00:09: ioport range 0x15e0-0x15ef has been reserved [ 1.074634] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 1.074641] pci 0000:00:01.0: IO window: disabled [ 1.074652] pci 0000:00:01.0: MEM window: 0xf0000000-0xf7ffffff [ 1.074662] pci 0000:00:01.0: PREFETCH window: 0x30000000-0x300fffff [ 1.074673] pci 0000:00:02.0: CardBus bridge, secondary bus 0000:02 [ 1.074680] pci 0000:00:02.0: IO window: 0x001400-0x0014ff [ 1.074689] pci 0000:00:02.0: IO window: 0x002400-0x0024ff [ 1.074698] pci 0000:00:02.0: PREFETCH window: 0x20000000-0x23ffffff [ 1.074706] pci 0000:00:02.0: MEM window: 0x24000000-0x27ffffff [ 1.074715] pci 0000:00:02.1: CardBus bridge, secondary bus 0000:06 [ 1.074721] pci 0000:00:02.1: IO window: 0x002800-0x0028ff [ 1.074729] pci 0000:00:02.1: IO window: 0x002c00-0x002cff [ 1.074737] pci 0000:00:02.1: PREFETCH window: 0x28000000-0x2bffffff [ 1.074746] pci 0000:00:02.1: MEM window: 0x2c000000-0x2fffffff [ 1.074913] pci 0000:00:02.0: power state changed by ACPI to D0 [ 1.074990] pci 0000:00:02.0: power state changed by ACPI to D0 [ 1.075703] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 [ 1.075711] PCI: setting IRQ 11 as level-triggered [ 1.075721] pci 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 1.075802] pci 0000:00:02.1: power state changed by ACPI to D0 [ 1.075878] pci 0000:00:02.1: power state changed by ACPI to D0 [ 1.076513] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 [ 1.076523] pci 0000:00:02.1: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 1.076539] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 1.076546] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 1.076554] pci_bus 0000:01: resource 1 mem: [0xf0000000-0xf7ffffff] [ 1.076561] pci_bus 0000:01: resource 2 pref mem [0x30000000-0x300fffff] [ 1.076569] pci_bus 0000:02: resource 0 io: [0x1400-0x14ff] [ 1.076576] pci_bus 0000:02: resource 1 io: [0x2400-0x24ff] [ 1.076583] pci_bus 0000:02: resource 2 pref mem [0x20000000-0x23ffffff] [ 1.076590] pci_bus 0000:02: resource 3 mem: [0x24000000-0x27ffffff] [ 1.076597] pci_bus 0000:06: resource 0 io: [0x2800-0x28ff] [ 1.076604] pci_bus 0000:06: resource 1 io: [0x2c00-0x2cff] [ 1.076611] pci_bus 0000:06: resource 2 pref mem [0x28000000-0x2bffffff] [ 1.076618] pci_bus 0000:06: resource 3 mem: [0x2c000000-0x2fffffff] [ 1.076723] NET: Registered protocol family 2 [ 1.077000] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 1.077837] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 1.078196] TCP bind hash table entries: 16384 (order: 5, 131072 bytes) [ 1.078620] TCP: Hash tables configured (established 16384 bind 16384) [ 1.078628] TCP reno registered [ 1.079017] NET: Registered protocol family 1 [ 1.079156] pci 0000:00:00.0: Limiting direct PCI/PCI transfers [ 1.079225] pci 0000:01:00.0: Boot video device [ 1.079501] Simple Boot Flag at 0x35 set to 0x1 [ 1.079737] cpufreq-nforce2: No nForce2 chipset. [ 1.079812] Scanning for low memory corruption every 60 seconds [ 1.080242] audit: initializing netlink socket (disabled) [ 1.080277] type=2000 audit(1281227797.079:1): initialized [ 1.103520] Trying to unpack rootfs image as initramfs... [ 1.127644] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 1.139847] VFS: Disk quotas dquot_6.5.2 [ 1.140143] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.142204] fuse init (API version 7.13) [ 1.142498] msgmni has been set to 968 [ 1.148057] alg: No test for stdrng (krng) [ 1.148286] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.148296] io scheduler noop registered [ 1.148301] io scheduler anticipatory registered [ 1.148306] io scheduler deadline registered [ 1.148472] io scheduler cfq registered (default) [ 1.148770] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.148833] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.149438] ACPI: AC Adapter [AC] (on-line) [ 1.149615] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 1.149902] ACPI: Lid Switch [LID] [ 1.150030] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 1.150042] ACPI: Sleep Button [SLPB] [ 1.150189] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 1.150196] ACPI: Power Button [PWRF] [ 1.150554] Marking TSC unstable due to TSC halts in idle [ 1.150767] processor LNXCPU:00: registered as cooling_device0 [ 1.155922] Switching to clocksource acpi_pm [ 1.273956] thermal LNXTHERM:01: registered as thermal_zone0 [ 1.273987] ACPI: Thermal Zone [THM0] (64 C) [ 1.281628] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.283858] serial 00:0c: activated [ 1.284473] isapnp: Scanning for PnP cards... [ 1.293573] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.352883] brd: module loaded [ 1.356957] ACPI: Battery Slot [BAT0] (battery present) [ 1.359394] loop: module loaded [ 1.359721] input: Macintosh mouse button emulation as /devices/virtual/input/input3 [ 1.360314] ata_piix 0000:00:07.1: version 2.13 [ 1.362898] scsi0 : ata_piix [ 1.364523] scsi1 : ata_piix [ 1.624853] ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0x1c00 irq 14 [ 1.624866] ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0x1c08 irq 15 [ 1.625911] Fixed MDIO Bus: probed [ 1.626015] PPP generic driver version 2.4.2 [ 1.626223] tun: Universal TUN/TAP device driver, 1.6 [ 1.626229] tun: (C) 1999-2004 Max Krasnyansky [ 1.626493] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.626546] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.626582] uhci_hcd: USB Universal Host Controller Interface driver [ 1.627551] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 [ 1.627564] uhci_hcd 0000:00:07.2: PCI INT D -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 [ 1.627586] uhci_hcd 0000:00:07.2: UHCI Host Controller [ 1.627743] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1 [ 1.627794] uhci_hcd 0000:00:07.2: irq 11, io base 0x00001c20 [ 1.633218] usb usb1: configuration #1 chosen from 1 choice [ 1.633344] hub 1-0:1.0: USB hub found [ 1.633382] hub 1-0:1.0: 2 ports detected [ 1.633662] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 1.666358] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.666398] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.673090] mice: PS/2 mouse device common for all mice [ 1.673504] rtc_cmos 00:06: RTC can wake from S4 [ 1.673678] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 [ 1.673717] rtc0: alarms up to one month, y3k, 242 bytes nvram [ 1.674092] device-mapper: uevent: version 1.0.3 [ 1.674498] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 1.674694] device-mapper: multipath: version 1.1.0 loaded [ 1.674702] device-mapper: multipath round-robin: version 1.0.0 loaded [ 1.676481] EISA: Probing bus 0 at eisa.0 [ 1.676497] Cannot allocate resource for EISA slot 1 [ 1.676505] Cannot allocate resource for EISA slot 2 [ 1.676529] EISA: Detected 0 cards. [ 1.679089] cpuidle: using governor ladder [ 1.679246] cpuidle: using governor menu [ 1.680766] TCP cubic registered [ 1.681287] NET: Registered protocol family 10 [ 1.682432] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 1.683542] lo: Disabled Privacy Extensions [ 1.684541] NET: Registered protocol family 17 [ 1.684694] Using IPI No-Shortcut mode [ 1.684939] PM: Resume from disk failed. [ 1.684987] registered taskstats version 1 [ 1.685359] Magic number: 6:190:607 [ 1.685525] rtc_cmos 00:06: setting system clock to 2010-08-08 00:36:38 UTC (1281227798) [ 1.685533] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.685539] EDD information not available. [ 1.832329] ata2.01: NODEV after polling detection [ 1.833523] ata1.00: ATA-7: ST910021A, 3.06, max UDMA/100 [ 1.833532] ata1.00: 195371568 sectors, multi 16: LBA48 [ 1.850035] ata1.00: configured for UDMA/33 [ 1.856785] ata2.00: ATAPI: HITACHI DVD-ROM GD-S200, 0034, max UDMA/33 [ 1.872559] ata2.00: configured for UDMA/33 [ 2.007843] isapnp: No Plug & Play device found [ 2.008385] scsi 0:0:0:0: Direct-Access ATA ST910021A 3.06 PQ: 0 ANSI: 5 [ 2.008885] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.009384] sd 0:0:0:0: [sda] 195371568 512-byte logical blocks: (100 GB/93.1 GiB) [ 2.009524] sd 0:0:0:0: [sda] Write Protect is off [ 2.009532] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.009603] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.010019] sda: [ 2.025281] scsi 1:0:0:0: CD-ROM HITACHI DVD-ROM GD-S200 0034 PQ: 0 ANSI: 5 [ 2.039383] sr0: scsi3-mmc drive: 10x/24x cd/rw xa/form2 cdda tray [ 2.039396] Uniform CD-ROM driver Revision: 3.20 [ 2.039763] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.039981] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 2.087781] sda2 sda3 [ 2.122283] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.467735] Freeing initrd memory: 12850k freed [ 2.539262] Freeing unused kernel memory: 660k freed [ 2.542895] Write protecting the kernel text: 4680k [ 2.542988] Write protecting the kernel read-only data: 1840k [ 2.611079] udev: starting version 151 [ 3.140800] Floppy drive(s): fd0 is 1.44M [ 3.163765] FDC 0 is a National Semiconductor PC87306 [ 3.238345] Linux agpgart interface v0.103 [ 3.269430] vga16fb: initializing [ 3.269448] vga16fb: mapped to 0xc00a0000 [ 3.269907] fb0: VGA16 VGA frame buffer device [ 3.270241] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:06/LNXVIDEO:00/input/input5 [ 3.270480] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 3.290552] agpgart-intel 0000:00:00.0: Intel 440BX Chipset [ 3.297671] agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xf8000000 [ 3.310694] 3c59x 0000:00:03.0: enabling device (0000 -> 0003) [ 3.311576] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 [ 3.311587] 3c59x 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 3.311618] 3c59x: Donald Becker and others. [ 3.311637] 0000:00:03.0: 3Com PCI 3c556B Laptop Hurricane at e0842400. [ 3.311650] 3c59x 0000:00:03.0: setting latency timer to 64 [ 3.498544] Console: switching to colour frame buffer device 80x30 [ 4.195897] EXT4-fs (sda2): mounted filesystem with ordered data mode [ 16.571758] Adding 500728k swap on /dev/sda3. Priority:-1 extents:1 across:500728k [ 16.583577] udev: starting version 151 [ 16.914344] lp: driver loaded but no devices found [ 17.179223] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 17.671877] type=1505 audit(1281224214.482:2): operation="profile_load" pid=432 name="/sbin/dhclient3" [ 17.676582] piix4_smbus 0000:00:07.3: IBM system detected; this module may corrupt your serial eeprom! Refusing to load module! [ 17.676608] piix4_smbus: probe of 0000:00:07.3 failed with error -1 [ 17.763918] type=1505 audit(1281224214.574:3): operation="profile_load" pid=432 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 17.764643] type=1505 audit(1281224214.578:4): operation="profile_load" pid=432 name="/usr/lib/connman/scripts/dhclient-script" [ 17.853695] Non-volatile memory driver v1.3 [ 17.853867] parport_pc 00:0d: reported by Plug and Play ACPI [ 17.853915] parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE] [ 17.932946] lp0: using parport0 (interrupt-driven). [ 17.940964] yenta_cardbus 0000:00:02.0: CardBus bridge found [1014:0130] [ 17.940998] yenta_cardbus 0000:00:02.0: Using INTVAL to route CSC interrupts to PCI [ 17.941005] yenta_cardbus 0000:00:02.0: Routing CardBus interrupts to PCI [ 17.941015] yenta_cardbus 0000:00:02.0: TI: mfunc 0x00001000, devctl 0x66 [ 18.172575] yenta_cardbus 0000:00:02.0: ISA IRQ mask 0x0438, PCI irq 11 [ 18.172587] yenta_cardbus 0000:00:02.0: Socket status: 30000020 [ 18.180756] yenta_cardbus 0000:00:02.1: CardBus bridge found [1014:0130] [ 18.180783] yenta_cardbus 0000:00:02.1: Using INTVAL to route CSC interrupts to PCI [ 18.180790] yenta_cardbus 0000:00:02.1: Routing CardBus interrupts to PCI [ 18.180800] yenta_cardbus 0000:00:02.1: TI: mfunc 0x00001000, devctl 0x66 [ 18.256758] irda_init() [ 18.256802] NET: Registered protocol family 23 [ 18.346458] ppdev: user-space parallel port driver [ 18.365222] nsc-ircc 00:0e: activated [ 18.365238] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 1. [ 18.376161] nsc-ircc, chip->init [ 18.376176] nsc-ircc, Found chip at base=0x02e [ 18.376208] nsc-ircc, driver loaded (Dag Brattli) [ 18.382449] IrDA: Registered device irda0 [ 18.382463] nsc-ircc, Using dongle: IBM31T1100 or Temic TFDS6000/TFDS6500 [ 18.413046] yenta_cardbus 0000:00:02.1: ISA IRQ mask 0x0430, PCI irq 11 [ 18.413058] yenta_cardbus 0000:00:02.1: Socket status: 30000006 [ 18.759118] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean. [ 18.759911] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [ 18.765120] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean. [ 18.765459] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean. [ 18.766089] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. [ 18.816169] pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0 [ 18.816242] pci 0000:02:00.0: reg 10 32bit mmio: [0xffff8000-0xffffffff] [ 18.890492] psmouse serio1: ID: 10 00 64 [ 19.133261] cfg80211: Calling CRDA to update world regulatory domain [ 19.254643] cfg80211: World regulatory domain updated: [ 19.254657] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 19.254665] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 19.254707] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 19.254714] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 19.254721] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 19.254729] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 19.487169] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af: clean. [ 19.487967] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [ 19.512394] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff: clean. [ 19.513513] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7: clean. [ 19.514162] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: clean. [ 19.554801] type=1505 audit(1281224216.366:5): operation="profile_replace" pid=652 name="/sbin/dhclient3" [ 19.556148] type=1505 audit(1281224216.366:6): operation="profile_replace" pid=652 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 19.609586] type=1505 audit(1281224216.422:7): operation="profile_replace" pid=652 name="/usr/lib/connman/scripts/dhclient-script" [ 19.715945] IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 19.759815] eth0: setting half-duplex. [ 19.760217] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 19.760869] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input6 [ 19.765725] type=1505 audit(1281224216.578:8): operation="profile_load" pid=654 name="/usr/bin/evince" [ 19.848441] rt61pci 0000:02:00.0: enabling device (0000 -> 0002) [ 19.848471] rt61pci 0000:02:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 19.848486] rt61pci 0000:02:00.0: setting latency timer to 64 [ 19.930257] thinkpad_acpi: disagrees about version of symbol snd_ctl_add [ 19.930273] thinkpad_acpi: Unknown symbol snd_ctl_add [ 19.930962] thinkpad_acpi: disagrees about version of symbol snd_card_register [ 19.930969] thinkpad_acpi: Unknown symbol snd_card_register [ 19.931285] thinkpad_acpi: disagrees about version of symbol snd_card_free [ 19.931291] thinkpad_acpi: Unknown symbol snd_card_free [ 19.961873] thinkpad_acpi: disagrees about version of symbol snd_ctl_new1 [ 19.961888] thinkpad_acpi: Unknown symbol snd_ctl_new1 [ 19.963644] thinkpad_acpi: disagrees about version of symbol snd_ctl_boolean_mono_info [ 19.963650] thinkpad_acpi: Unknown symbol snd_ctl_boolean_mono_info [ 19.983368] type=1505 audit(1281224216.794:9): operation="profile_load" pid=654 name="/usr/bin/evince-previewer" [ 19.998625] thinkpad_acpi: disagrees about version of symbol snd_ctl_notify [ 19.998639] thinkpad_acpi: Unknown symbol snd_ctl_notify [ 20.003304] thinkpad_acpi: disagrees about version of symbol snd_card_create [ 20.003313] thinkpad_acpi: Unknown symbol snd_card_create [ 20.088219] type=1505 audit(1281224216.902:10): operation="profile_load" pid=654 name="/usr/bin/evince-thumbnailer" [ 20.122264] phy0: Selected rate control algorithm 'minstrel' [ 20.126334] Registered led device: rt61pci-phy0::radio [ 20.126651] Registered led device: rt61pci-phy0::assoc [ 20.235762] rt61pci 0000:02:00.0: firmware: requesting rt2561s.bin [ 20.248272] type=1505 audit(1281224217.062:11): operation="profile_load" pid=758 name="/usr/lib/cups/backend/cups-pdf" [ 20.329509] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 20.595587] Sound Fusion CS46xx 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 20.595610] ALSA cs46xx_lib.c:3788: hack for Thinkpad 600X/A20/T20 enabled [ 20.757722] ALSA cs46xx_lib.c:432: cs46xx: failure waiting for FIFO command to complete [ 20.757738] ALSA cs46xx_lib.c:469: failed waiting for FIFO at addr (01) [ 21.132775] ALSA cs46xx_lib.c:2329: snd_cs46xx: detecting primary codec [ 21.132903] ALSA cs46xx_lib.c:2241: cs46xx: CODEC1 mode 0000 [ 21.156498] ALSA cs46xx_lib.c:2339: snd_cs46xx: detecting seconadry codec [ 21.156593] ALSA cs46xx_lib.c:2296: snd_cs46xx: seconadry codec not present [ 21.156649] ALSA dsp_spos.c:372: dsp_spos: loading module cwc4630 into DSP [ 21.156659] ALSA dsp_spos.c:375: dsp_spos: clearing parameter area [ 21.157400] ALSA dsp_spos.c:328: dsp_spos: downloading parameter data to chip (00000000-00000200) [ 21.157434] ALSA dsp_spos.c:385: dsp_spos: clearing sample area [ 21.158298] ALSA dsp_spos.c:343: dsp_spos: module got no sample segment [ 21.158306] ALSA dsp_spos.c:395: dsp_spos: clearing code area [ 21.160131] ALSA dsp_spos.c:422: dsp_spos: downloading code to chip (00020000-00020ca0) [ 21.160165] ALSA dsp_spos.c:116: dsp_spos: 0 instructions reallocated [ 21.160362] ALSA dsp_spos.c:372: dsp_spos: loading module cwcasync into DSP [ 21.160370] ALSA dsp_spos.c:319: dsp_spos: module got no parameter segment [ 21.160378] ALSA dsp_spos.c:343: dsp_spos: module got no sample segment [ 21.160430] ALSA dsp_spos.c:422: dsp_spos: downloading code to chip (00020ca0-00021378) [ 21.160439] ALSA dsp_spos.c:88: handle_wideop[1]: 01400:02731 addr 8000 [ 21.160449] ALSA dsp_spos.c:93: handle_wideop[1]: ROM symbol not reallocated [ 21.160457] ALSA dsp_spos.c:105: handle_wideop:[2] 01400:02731 addr 8000 [ 21.160466] ALSA dsp_spos.c:88: handle_wideop[1]: 01000:60630 addr 000c [ 21.160475] ALSA dsp_spos.c:105: handle_wideop:[2] 0100d:00630 addr 01a0 [ 21.160484] ALSA dsp_spos.c:88: handle_wideop[1]: 01000:20630 addr 0004 [ 21.160493] ALSA dsp_spos.c:105: handle_wideop:[2] 0100c:c0630 addr 0198 [ 21.160502] ALSA dsp_spos.c:88: handle_wideop[1]: 01400:42730 addr 8008 [ 21.160511] ALSA dsp_spos.c:93: handle_wideop[1]: ROM symbol not reallocated [ 21.160519] ALSA dsp_spos.c:105: handle_wideop:[2] 01400:42730 addr 8008 [ 21.160528] ALSA dsp_spos.c:88: handle_wideop[1]: 01000:f0630 addr 001e [ 21.160537] ALSA dsp_spos.c:105: handle_wideop:[2] 0100d:90630 addr 01b2 [ 21.160546] ALSA dsp_spos.c:88: handle_wideop[1]: 01000:e00f2 addr 001c [ 21.160555] ALSA dsp_spos.c:105: handle_wideop:[2] 0100d:800f2 addr 01b0 [ 21.160564] ALSA dsp_spos.c:88: handle_wideop[1]: 01001:e8030 addr 003d [ 21.160573] ALSA dsp_spos.c:105: handle_wideop:[2] 0100e:88030 addr 01d1 [ 21.160582] ALSA dsp_spos.c:88: handle_wideop[1]: 01001:82630 addr 0030 [ 21.160591] ALSA dsp_spos.c:105: handle_wideop:[2] 0100e:22630 addr 01c4 [ 21.160600] ALSA dsp_spos.c:88: handle_wideop[1]: 01001:504a0 addr 002a [ 21.160608] ALSA dsp_spos.c:105: handle_wideop:[2] 0100d:f04a0 addr 01be [ 21.160618] ALSA dsp_spos.c:88: handle_wideop[1]: 01001:e8630 addr 003d [ 21.160627] ALSA dsp_spos.c:105: handle_wideop:[2] 0100e:88630 addr 01d1 [ 21.160636] ALSA dsp_spos.c:88: handle_wideop[1]: 01001:d84a0 addr 003b [ 21.160645] ALSA dsp_spos.c:105: handle_wideop:[2] 0100e:784a0 addr 01cf [ 21.160655] ALSA dsp_spos.c:88: handle_wideop[1]: 01002:b8630 addr 0057 [ 21.160664] ALSA dsp_spos.c:105: handle_wideop:[2] 0100f:58630 addr 01eb [ 21.160673] ALSA dsp_spos.c:88: handle_wideop[1]: 01002:ac0f2 addr 0055 [ 21.160682] ALSA dsp_spos.c:105: handle_wideop:[2] 0100f:4c0f2 addr 01e9 [ 21.160692] ALSA dsp_spos.c:88: handle_wideop[1]: 01003:ac030 addr 0075 [ 21.160700] ALSA dsp_spos.c:105: handle_wideop:[2] 01010:4c030 addr 0209 [ 21.160709] ALSA dsp_spos.c:88: handle_wideop[1]: 01003:884a0 addr 0071 [ 21.160718] ALSA dsp_spos.c:105: handle_wideop:[2] 01010:284a0 addr 0205 [ 21.160728] ALSA dsp_spos.c:88: handle_wideop[1]: 01003:706b0 addr 006e [ 21.160736] ALSA dsp_spos.c:105: handle_wideop:[2] 01010:106b0 addr 0202 [ 21.160746] ALSA dsp_spos.c:88: handle_wideop[1]: 01003:78730 addr 006f [ 21.160754] ALSA dsp_spos.c:105: handle_wideop:[2] 01010:18730 addr 0203 [ 21.160765] ALSA dsp_spos.c:88: handle_wideop[1]: 01004:8c030 addr 0091 [ 21.160774] ALSA dsp_spos.c:105: handle_wideop:[2] 01011:2c030 addr 0225 [ 21.160783] ALSA dsp_spos.c:88: handle_wideop[1]: 01004:704a0 addr 008e [ 21.160791] ALSA dsp_spos.c:105: handle_wideop:[2] 01011:104a0 addr 0222 [ 21.160802] ALSA dsp_spos.c:88: handle_wideop[1]: 01400:02731 addr 8000 [ 21.160811] ALSA dsp_spos.c:93: handle_wideop[1]: ROM symbol not reallocated [ 21.160818] ALSA dsp_spos.c:105: handle_wideop:[2] 01400:02731 addr 8000 [ 21.160828] ALSA dsp_spos.c:88: handle_wideop[1]: 01005:64630 addr 00ac [ 21.160837] ALSA dsp_spos.c:105: handle_wideop:[2] 01012:04630 addr 0240 [ 21.160845] ALSA dsp_spos.c:88: handle_wideop[1]: 01005:746b0 addr 00ae [ 21.160854] ALSA dsp_spos.c:105: handle_wideop:[2] 01012:146b0 addr 0242 [ 21.160864] ALSA dsp_spos.c:88: handle_wideop[1]: 01400:40630 addr 8008 [ 21.160872] ALSA dsp_spos.c:93: handle_wideop[1]: ROM symbol not reallocated [ 21.160880] ALSA dsp_spos.c:105: handle_wideop:[2] 01400:40630 addr 8008 [ 21.160889] ALSA dsp_spos.c:88: handle_wideop[1]: 01005:d86a0 addr 00bb [ 21.160898] ALSA dsp_spos.c:105: handle_wideop:[2] 01012:786a0 addr 024f [ 21.160907] ALSA dsp_spos.c:88: handle_wideop[1]: 01400:42730 addr 8008 [ 21.160916] ALSA dsp_spos.c:93: handle_wideop[1]: ROM symbol not reallocated [ 21.160924] ALSA dsp_spos.c:105: handle_wideop:[2] 01400:42730 addr 8008 [ 21.160933] ALSA dsp_spos.c:88: handle_wideop[1]: 01006:60630 addr 00cc [ 21.160942] ALSA dsp_spos.c:105: handle_wideop:[2] 01013:00630 addr 0260 [ 21.160951] ALSA dsp_spos.c:88: handle_wideop[1]: 01400:586b0 addr 800b [ 21.160960] ALSA dsp_spos.c:93: handle_wideop[1]: ROM symbol not reallocated [ 21.160967] ALSA dsp_spos.c:105: handle_wideop:[2] 01400:586b0 addr 800b [ 21.160976] ALSA dsp_spos.c:88: handle_wideop[1]: 01400:500b0 addr 800a [ 21.160985] ALSA dsp_spos.c:93: handle_wideop[1]: ROM symbol not reallocated [ 21.160993] ALSA dsp_spos.c:105: handle_wideop:[2] 01400:500b0 addr 800a [ 21.161002] ALSA dsp_spos.c:88: handle_wideop[1]: 01400:40730 addr 8008 [ 21.161011] ALSA dsp_spos.c:93: handle_wideop[1]: ROM symbol not reallocated [ 21.161019] ALSA dsp_spos.c:105: handle_wideop:[2] 01400:40730 addr 8008 [ 21.161028] ALSA dsp_spos.c:116: dsp_spos: 29 instructions reallocated [ 21.161134] ALSA dsp_spos.c:372: dsp_spos: loading module cwcsnoop into DSP [ 21.161142] ALSA dsp_spos.c:319: dsp_spos: module got no parameter segment [ 21.161150] ALSA dsp_spos.c:343: dsp_spos: module got no sample segment [ 21.161164] ALSA dsp_spos.c:422: dsp_spos: downloading code to chip (00021378-00021470) [ 21.161174] ALSA dsp_spos.c:88: handle_wideop[1]: 01028:80630 addr 0510 [ 21.161182] ALSA dsp_spos.c:105: handle_wideop:[2] 01013:f8630 addr 027f [ 21.161192] ALSA dsp_spos.c:88: handle_wideop[1]: 01028:a83a0 addr 0515 [ 21.161201] ALSA dsp_spos.c:105: handle_wideop:[2] 01014:203a0 addr 0284 [ 21.161210] ALSA dsp_spos.c:88: handle_wideop[1]: 01028:d8730 addr 051b [ 21.161219] ALSA dsp_spos.c:105: handle_wideop:[2] 01014:50730 addr 028a [ 21.161229] ALSA dsp_spos.c:116: dsp_spos: 3 instructions reallocated [ 21.161245] ALSA dsp_spos.c:372: dsp_spos: loading module cwcbinhack into DSP [ 21.161253] ALSA dsp_spos.c:319: dsp_spos: module got no parameter segment [ 21.161260] ALSA dsp_spos.c:343: dsp_spos: module got no sample segment [ 21.161274] ALSA dsp_spos.c:422: dsp_spos: downloading code to chip (00021470-00021570) [ 21.161284] ALSA dsp_spos.c:88: handle_wideop[1]: 01016:b8630 addr 02d7 [ 21.161293] ALSA dsp_spos.c:105: handle_wideop:[2] 01014:e8630 addr 029d [ 21.161302] ALSA dsp_spos.c:88: handle_wideop[1]: 01016:e03a0 addr 02dc [ 21.161311] ALSA dsp_spos.c:105: handle_wideop:[2] 01015:103a0 addr 02a2 [ 21.161320] ALSA dsp_spos.c:88: handle_wideop[1]: 01017:10730 addr 02e2 [ 21.161329] ALSA dsp_spos.c:105: handle_wideop:[2] 01015:40730 addr 02a8 [ 21.161338] ALSA dsp_spos.c:116: dsp_spos: 3 instructions reallocated [ 21.161355] ALSA dsp_spos.c:372: dsp_spos: loading module cwcdma into DSP [ 21.161363] ALSA dsp_spos.c:319: dsp_spos: module got no parameter segment [ 21.161370] ALSA dsp_spos.c:343: dsp_spos: module got no sample segment [ 21.161409] ALSA dsp_spos.c:422: dsp_spos: downloading code to chip (00021570-00021630) [ 21.161419] ALSA dsp_spos.c:88: handle_wideop[1]: 01400:02731 addr 8000 [ 21.161427] ALSA dsp_spos.c:93: handle_wideop[1]: ROM symbol not reallocated [ 21.161435] ALSA dsp_spos.c:105: handle_wideop:[2] 01400:02731 addr 8000 [ 21.161444] ALSA dsp_spos.c:88: handle_wideop[1]: 01400:58630 addr 800b [ 21.161453] ALSA dsp_spos.c:93: handle_wideop[1]: ROM symbol not reallocated [ 21.161461] ALSA dsp_spos.c:105: handle_wideop:[2] 01400:58630 addr 800b [ 21.161470] ALSA dsp_spos.c:88: handle_wideop[1]: 01000:902a0 addr 0012 [ 21.161479] ALSA dsp_spos.c:105: handle_wideop:[2] 01016:002a0 addr 02c0 [ 21.161488] ALSA dsp_spos.c:88: handle_wideop[1]: 01400:58730 addr 800b [ 21.161497] ALSA dsp_spos.c:93: handle_wideop[1]: ROM symbol not reallocated [ 21.161505] ALSA dsp_spos.c:105: handle_wideop:[2] 01400:58730 addr 800b [ 21.161514] ALSA dsp_spos.c:116: dsp_spos: 4 instructions reallocated [ 21.183352] ALSA dsp_spos_scb_lib.c:308: dsp_spos: creating SCB [ 21.183379] ALSA dsp_spos_scb_lib.c:308: dsp_spos: creating SCB [ 21.183399] ALSA dsp_spos_scb_lib.c:308: dsp_spos: creating SCB [ 21.183421] ALSA dsp_spos_scb_lib.c:308: dsp_spos: creating SCB [ 21.183441] ALSA dsp_spos_scb_lib.c:308: dsp_spos: creating SCB [ 21.183462] ALSA dsp_spos_scb_lib.c:308: dsp_spos: creating SCB [ 21.183481] ALSA dsp_spos_scb_lib.c:308: dsp_spos: creating SCB [ 21.183503] ALSA dsp_spos_scb_lib.c:308: dsp_spos: creating SCB [ 21.183530] ALSA dsp_spos_scb_lib.c:308: dsp_spos: creating SCB [ 21.183552] ALSA dsp_spos_scb_lib.c:308: dsp_spos: creating SCB [ 21.183573] ALSA dsp_spos_scb_lib.c:308: dsp_spos: creating SCB [ 21.183592] ALSA dsp_spos_scb_lib.c:615: dsp_spos: setting SrcTaskSCB_SPDIFI rate to 48000 [ 21.183610] ALSA dsp_spos_scb_lib.c:308: dsp_spos: creating SCB