[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.31-17-generic (buildd@crested) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #54-Ubuntu SMP Thu Dec 10 17:01:44 UTC 2009 (Ubuntu 2.6.31-17.54-generic) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-17-generic root=UUID=5a54134b-cab4-45fd-960c-a84d7cb41f39 ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e7000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bff90000 (usable) [ 0.000000] BIOS-e820: 00000000bff90000 - 00000000bffa0000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bffa0000 - 00000000bffe0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bffe0000 - 00000000c0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000120000000 (usable) [ 0.000000] DMI present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x120000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000120000000 aka 4608M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xbff90 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable) [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e7000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000bff90000 (usable) [ 0.000000] modified: 00000000bff90000 - 00000000bffa0000 (ACPI data) [ 0.000000] modified: 00000000bffa0000 - 00000000bffe0000 (ACPI NVS) [ 0.000000] modified: 00000000bffe0000 - 00000000c0000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fef00000 (reserved) [ 0.000000] modified: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000120000000 (usable) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: 0000000000000000-00000000bff90000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0000000000 - 0080000000 page 1G [ 0.000000] 0080000000 - 00bfe00000 page 2M [ 0.000000] 00bfe00000 - 00bff90000 page 4k [ 0.000000] kernel direct mapping tables up to bff90000 @ 10000-13000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000120000000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0100000000 - 0120000000 page 2M [ 0.000000] kernel direct mapping tables up to 120000000 @ 12000-14000 [ 0.000000] RAMDISK: 37871000 - 37fef33d [ 0.000000] ACPI: RSDP 00000000000fb560 00014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT 00000000bff90000 00048 (v01 020509 RSDT1228 20090205 MSFT 00000097) [ 0.000000] ACPI: FACP 00000000bff90200 00084 (v01 A M I OEMFACP 12000601 MSFT 00000097) [ 0.000000] ACPI: DSDT 00000000bff90450 08707 (v01 ASR80 ASR80161 00000161 INTL 20051117) [ 0.000000] ACPI: FACS 00000000bffa0000 00040 [ 0.000000] ACPI: APIC 00000000bff90390 00080 (v01 020509 APIC1228 20090205 MSFT 00000097) [ 0.000000] ACPI: MCFG 00000000bff90410 0003C (v01 020509 OEMMCFG 20090205 MSFT 00000097) [ 0.000000] ACPI: OEMB 00000000bffa0040 00073 (v01 020509 OEMB1228 20090205 MSFT 00000097) [ 0.000000] ACPI: AAFT 00000000bff98b60 00027 (v01 020509 OEMAAFT 20090205 MSFT 00000097) [ 0.000000] ACPI: HPET 00000000bff98b90 00038 (v01 020509 OEMHPET0 20090205 MSFT 00000097) [ 0.000000] ACPI: INFO 00000000bffa00c0 00124 (v01 020509 AMDINFO 20090205 MSFT 00000097) [ 0.000000] ACPI: NVHD 00000000bffa01f0 00284 (v01 020509 NVHDCP 20090205 MSFT 00000097) [ 0.000000] ACPI: SSDT 00000000bff98bd0 00544 (v01 A M I POWERNOW 00000001 AMD 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000120000000 [ 0.000000] Bootmem setup node 0 0000000000000000-0000000120000000 [ 0.000000] NODE_DATA [0000000000013000 - 0000000000017fff] [ 0.000000] bootmap [0000000000018000 - 000000000003bfff] pages 24 [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0120000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 00019e4ccc] TEXT DATA BSS ==> [0001000000 - 00019e4ccc] [ 0.000000] #3 [0037871000 - 0037fef33d] RAMDISK ==> [0037871000 - 0037fef33d] [ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #5 [00019e5000 - 00019e513b] BRK ==> [00019e5000 - 00019e513b] [ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] [ 0.000000] #7 [0000012000 - 0000013000] PGTABLE ==> [0000012000 - 0000013000] [ 0.000000] [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff880028600000-ffff88002b7fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00120000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000bff90 [ 0.000000] 0: 0x00100000 -> 0x00120000 [ 0.000000] On node 0 totalpages: 917279 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 102 pages reserved [ 0.000000] DMA zone: 3825 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 767944 pages, LIFO batch:31 [ 0.000000] Normal zone: 1792 pages used for memmap [ 0.000000] Normal zone: 129280 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x2008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e7000 [ 0.000000] PM: Registered nosave memory: 00000000000e7000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000bff90000 - 00000000bffa0000 [ 0.000000] PM: Registered nosave memory: 00000000bffa0000 - 00000000bffe0000 [ 0.000000] PM: Registered nosave memory: 00000000bffe0000 - 00000000c0000000 [ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fef00000 [ 0.000000] PM: Registered nosave memory: 00000000fef00000 - 00000000fff80000 [ 0.000000] PM: Registered nosave memory: 00000000fff80000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3ec00000) [ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 30 pages at ffff88002801f000, static data 90720 bytes [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 901049 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-17-generic root=UUID=5a54134b-cab4-45fd-960c-a84d7cb41f39 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ 7dec000000 size 32 MB [ 0.000000] Aperture beyond 4GB. Ignoring. [ 0.000000] Your BIOS doesn't leave a aperture memory hole [ 0.000000] Please enable the IOMMU option in the BIOS setup [ 0.000000] This costs you 64 MB of RAM [ 0.000000] Mapping aperture over 65536 KB of RAM @ 20000000 [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000024000000 [ 0.000000] Memory: 3533864k/4718592k available (5315k kernel code, 1049476k absent, 135252k reserved, 3017k data, 660k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] NR_IRQS:4352 nr_irqs:440 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2600.373 MHz processor. [ 0.000014] spurious 8259A interrupt: IRQ7. [ 0.001891] Console: colour VGA+ 80x25 [ 0.001893] console [tty0] enabled [ 0.010000] allocated 36700160 bytes of page_cgroup [ 0.010000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.010000] hpet clockevent registered [ 0.010000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.010000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5200.73 BogoMIPS (lpj=26003690) [ 0.010000] Security Framework initialized [ 0.010000] AppArmor: AppArmor initialized [ 0.010000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.010000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.010000] Mount-cache hash table entries: 256 [ 0.010000] Initializing cgroup subsys ns [ 0.010000] Initializing cgroup subsys cpuacct [ 0.010000] Initializing cgroup subsys memory [ 0.010000] Initializing cgroup subsys freezer [ 0.010000] Initializing cgroup subsys net_cls [ 0.010000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.010000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.010000] CPU 0/0x0 -> Node 0 [ 0.010000] tseg: 0000000000 [ 0.010000] CPU: Physical Processor ID: 0 [ 0.010000] CPU: Processor Core ID: 0 [ 0.010000] mce: CPU supports 6 MCE banks [ 0.010000] using C1E aware idle routine [ 0.010000] Performance Counters: AMD PMU driver. [ 0.010000] ... version: 0 [ 0.010000] ... bit width: 48 [ 0.010000] ... generic counters: 4 [ 0.010000] ... value mask: 0000ffffffffffff [ 0.010000] ... max period: 00007fffffffffff [ 0.010000] ... fixed-purpose counters: 0 [ 0.010000] ... counter mask: 000000000000000f [ 0.010000] ACPI: Core revision 20090521 [ 0.016938] Setting APIC routing to flat [ 0.017407] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.117451] CPU0: AMD Phenom(tm) 9950 Quad-Core Processor stepping 03 [ 0.120000] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.010000] Initializing CPU#1 [ 0.010000] Calibrating delay using timer specific routine.. 5200.20 BogoMIPS (lpj=26001032) [ 0.010000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.010000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.010000] CPU 1/0x1 -> Node 0 [ 0.010000] CPU: Physical Processor ID: 0 [ 0.010000] CPU: Processor Core ID: 1 [ 0.010000] mce: CPU supports 6 MCE banks [ 0.010000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.270643] CPU1: AMD Phenom(tm) 9950 Quad-Core Processor stepping 03 [ 0.270654] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.280058] Booting processor 2 APIC 0x2 ip 0x6000 [ 0.010000] Initializing CPU#2 [ 0.010000] Calibrating delay using timer specific routine.. 5200.10 BogoMIPS (lpj=26000511) [ 0.010000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.010000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.010000] CPU 2/0x2 -> Node 0 [ 0.010000] CPU: Physical Processor ID: 0 [ 0.010000] CPU: Processor Core ID: 2 [ 0.010000] mce: CPU supports 6 MCE banks [ 0.010000] x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106 [ 0.440689] CPU2: AMD Phenom(tm) 9950 Quad-Core Processor stepping 03 [ 0.440699] checking TSC synchronization [CPU#0 -> CPU#2]: passed. [ 0.450056] Booting processor 3 APIC 0x3 ip 0x6000 [ 0.010000] Initializing CPU#3 [ 0.010000] Calibrating delay using timer specific routine.. 5200.09 BogoMIPS (lpj=26000476) [ 0.010000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.010000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.010000] CPU 3/0x3 -> Node 0 [ 0.010000] CPU: Physical Processor ID: 0 [ 0.010000] CPU: Processor Core ID: 3 [ 0.010000] mce: CPU supports 6 MCE banks [ 0.010000] x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106 [ 0.610634] CPU3: AMD Phenom(tm) 9950 Quad-Core Processor stepping 03 [ 0.610644] checking TSC synchronization [CPU#0 -> CPU#3]: passed. [ 0.620010] Brought up 4 CPUs [ 0.620013] Total of 4 processors activated (20801.14 BogoMIPS). [ 0.620102] CPU0 attaching sched-domain: [ 0.620104] domain 0: span 0-3 level MC [ 0.620107] groups: 0 1 2 3 [ 0.620112] CPU1 attaching sched-domain: [ 0.620113] domain 0: span 0-3 level MC [ 0.620115] groups: 1 2 3 0 [ 0.620118] CPU2 attaching sched-domain: [ 0.620119] domain 0: span 0-3 level MC [ 0.620121] groups: 2 3 0 1 [ 0.620124] CPU3 attaching sched-domain: [ 0.620125] domain 0: span 0-3 level MC [ 0.620127] groups: 3 0 1 2 [ 0.620208] Booting paravirtualized kernel on bare hardware [ 0.620208] regulator: core version 0.5 [ 0.620208] Time: 12:27:16 Date: 01/11/10 [ 0.620208] NET: Registered protocol family 16 [ 0.620219] node 0 link 0: io port [1000, ffffff] [ 0.620221] TOM: 00000000e0000000 aka 3584M [ 0.620223] Fam 10h mmconf [e0000000, efffffff] [ 0.620225] node 0 link 0: mmio [e0000000, efffffff] ==> none [ 0.620227] node 0 link 0: mmio [f0000000, fe0bffff] [ 0.620229] node 0 link 0: mmio [a0000, bffff] [ 0.620231] TOM2: 0000000120000000 aka 4608M [ 0.620233] bus: [00,07] on node 0 link 0 [ 0.620235] bus: 00 index 0 io port: [0, ffff] [ 0.620236] bus: 00 index 1 mmio: [f0000000, ffffffff] [ 0.620238] bus: 00 index 2 mmio: [a0000, bffff] [ 0.620239] bus: 00 index 3 mmio: [120000000, fcffffffff] [ 0.620249] ACPI: bus type pci registered [ 0.620313] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.620315] PCI: Not using MMCONFIG. [ 0.620317] PCI: Using configuration type 1 for base access [ 0.620318] PCI: Using configuration type 1 for extended access [ 0.620862] bio: create slab at 0 [ 0.620862] ACPI: EC: Look up EC in DSDT [ 0.636566] ACPI: Interpreter enabled [ 0.636570] ACPI: (supports S0 S1 S3 S4 S5) [ 0.636586] ACPI: Using IOAPIC for interrupt routing [ 0.636642] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.642763] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources [ 0.649211] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.662211] ACPI Warning: Incorrect checksum in table [OEMB] - 66, should be 65 20090521 tbutils-246 [ 0.662444] ACPI: No dock devices found. [ 0.662855] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.663109] pci 0000:00:01.0: reg 10 io port: [0x2f00-0x2fff] [ 0.663146] pci 0000:00:01.1: reg 10 io port: [0x2900-0x293f] [ 0.663156] pci 0000:00:01.1: reg 20 io port: [0x2d00-0x2d3f] [ 0.663160] pci 0000:00:01.1: reg 24 io port: [0x2e00-0x2e3f] [ 0.663179] pci 0000:00:01.1: PME# supported from D3hot D3cold [ 0.663184] pci 0000:00:01.1: PME# disabled [ 0.663237] pci 0000:00:01.3: reg 10 32bit mmio: [0xfce80000-0xfcefffff] [ 0.663358] pci 0000:00:02.0: reg 10 32bit mmio: [0xfce7f000-0xfce7ffff] [ 0.663379] pci 0000:00:02.0: supports D1 D2 [ 0.663381] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.663383] pci 0000:00:02.0: PME# disabled [ 0.663404] pci 0000:00:02.1: reg 10 32bit mmio: [0xfce7ec00-0xfce7ecff] [ 0.663429] pci 0000:00:02.1: supports D1 D2 [ 0.663431] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.663434] pci 0000:00:02.1: PME# disabled [ 0.663460] pci 0000:00:04.0: reg 10 32bit mmio: [0xfce7d000-0xfce7dfff] [ 0.663481] pci 0000:00:04.0: supports D1 D2 [ 0.663482] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.663485] pci 0000:00:04.0: PME# disabled [ 0.663506] pci 0000:00:04.1: reg 10 32bit mmio: [0xfce7e800-0xfce7e8ff] [ 0.663531] pci 0000:00:04.1: supports D1 D2 [ 0.663533] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.663536] pci 0000:00:04.1: PME# disabled [ 0.663567] pci 0000:00:06.0: reg 20 io port: [0xffa0-0xffaf] [ 0.663627] pci 0000:00:09.0: reg 10 io port: [0xc480-0xc487] [ 0.663630] pci 0000:00:09.0: reg 14 io port: [0xc400-0xc403] [ 0.663633] pci 0000:00:09.0: reg 18 io port: [0xc080-0xc087] [ 0.663636] pci 0000:00:09.0: reg 1c io port: [0xc000-0xc003] [ 0.663639] pci 0000:00:09.0: reg 20 io port: [0xbc00-0xbc0f] [ 0.663642] pci 0000:00:09.0: reg 24 32bit mmio: [0xfce76000-0xfce77fff] [ 0.663676] pci 0000:00:0a.0: reg 10 32bit mmio: [0xfce7c000-0xfce7cfff] [ 0.663680] pci 0000:00:0a.0: reg 14 io port: [0xb880-0xb887] [ 0.663683] pci 0000:00:0a.0: reg 18 32bit mmio: [0xfce7e400-0xfce7e4ff] [ 0.663686] pci 0000:00:0a.0: reg 1c 32bit mmio: [0xfce7e000-0xfce7e00f] [ 0.663705] pci 0000:00:0a.0: supports D1 D2 [ 0.663706] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.663710] pci 0000:00:0a.0: PME# disabled [ 0.663737] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.663739] pci 0000:00:0b.0: PME# disabled [ 0.663943] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.663950] pci 0000:00:10.0: PME# disabled [ 0.664185] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.664198] pci 0000:00:12.0: PME# disabled [ 0.664437] pci 0000:00:13.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.664444] pci 0000:00:13.0: PME# disabled [ 0.664575] pci 0000:01:09.0: reg 10 io port: [0xd800-0xd8ff] [ 0.664608] pci 0000:01:09.0: supports D1 D2 [ 0.664633] pci 0000:01:0a.0: reg 10 io port: [0xd400-0xd4ff] [ 0.664638] pci 0000:01:0a.0: reg 14 32bit mmio: [0xfcfffc00-0xfcfffcff] [ 0.664667] pci 0000:01:0a.0: supports D1 D2 [ 0.664669] pci 0000:01:0a.0: PME# supported from D1 D2 D3hot [ 0.664672] pci 0000:01:0a.0: PME# disabled [ 0.664696] pci 0000:00:08.0: transparent bridge [ 0.664699] pci 0000:00:08.0: bridge io port: [0xd000-0xdfff] [ 0.664701] pci 0000:00:08.0: bridge 32bit mmio: [0xfcf00000-0xfcffffff] [ 0.664718] pci 0000:02:00.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff] [ 0.664722] pci 0000:02:00.0: reg 14 64bit mmio: [0xf0000000-0xf7ffffff] [ 0.664727] pci 0000:02:00.0: reg 1c 64bit mmio: [0xf8000000-0xf9ffffff] [ 0.664730] pci 0000:02:00.0: reg 24 io port: [0xec00-0xec7f] [ 0.664733] pci 0000:02:00.0: reg 30 32bit mmio: [0xfebe0000-0xfebfffff] [ 0.664757] pci 0000:00:0b.0: bridge io port: [0xe000-0xefff] [ 0.664759] pci 0000:00:0b.0: bridge 32bit mmio: [0xfd000000-0xfebfffff] [ 0.664763] pci 0000:00:0b.0: bridge 64bit mmio pref: [0xf0000000-0xf9ffffff] [ 0.664831] pci 0000:00:10.0: bridge 64bit mmio pref: [0xfbd00000-0xfbdfffff] [ 0.664901] pci 0000:00:12.0: bridge 64bit mmio pref: [0xfbe00000-0xfbefffff] [ 0.664972] pci 0000:00:13.0: bridge 64bit mmio pref: [0xfbf00000-0xfbffffff] [ 0.665013] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.665272] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.665366] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IXVE._PRT] [ 0.665427] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.MXR0._PRT] [ 0.665493] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT] [ 0.665553] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR13._PRT] [ 0.681688] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled. [ 0.681934] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *10 [ 0.682180] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *11 [ 0.682422] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled. [ 0.682666] ACPI: PCI Interrupt Link [LN0A] (IRQs 16 17 18 19) *10 [ 0.682908] ACPI: PCI Interrupt Link [LN0B] (IRQs 16 17 18 19) *0, disabled. [ 0.683150] ACPI: PCI Interrupt Link [LN0C] (IRQs 16 17 18 19) *0, disabled. [ 0.683393] ACPI: PCI Interrupt Link [LN0D] (IRQs 16 17 18 19) *0, disabled. [ 0.683635] ACPI: PCI Interrupt Link [LN1A] (IRQs 16 17 18 19) *0, disabled. [ 0.683877] ACPI: PCI Interrupt Link [LN1B] (IRQs 16 17 18 19) *0, disabled. [ 0.684120] ACPI: PCI Interrupt Link [LN1C] (IRQs 16 17 18 19) *0, disabled. [ 0.684363] ACPI: PCI Interrupt Link [LN1D] (IRQs 16 17 18 19) *0, disabled. [ 0.684609] ACPI: PCI Interrupt Link [LN2A] (IRQs 16 17 18 19) *11 [ 0.684853] ACPI: PCI Interrupt Link [LN2B] (IRQs 16 17 18 19) *0, disabled. [ 0.685095] ACPI: PCI Interrupt Link [LN2C] (IRQs 16 17 18 19) *0, disabled. [ 0.685338] ACPI: PCI Interrupt Link [LN2D] (IRQs 16 17 18 19) *0, disabled. [ 0.685585] ACPI: PCI Interrupt Link [LN3A] (IRQs 16 17 18 19) *15 [ 0.685827] ACPI: PCI Interrupt Link [LN3B] (IRQs 16 17 18 19) *0, disabled. [ 0.686070] ACPI: PCI Interrupt Link [LN3C] (IRQs 16 17 18 19) *0, disabled. [ 0.686312] ACPI: PCI Interrupt Link [LN3D] (IRQs 16 17 18 19) *0, disabled. [ 0.686555] ACPI: PCI Interrupt Link [LN4A] (IRQs 16 17 18 19) *0, disabled. [ 0.686798] ACPI: PCI Interrupt Link [LN4B] (IRQs 16 17 18 19) *0, disabled. [ 0.687033] ACPI: PCI Interrupt Link [LN4C] (IRQs 16 17 18 19) *0, disabled. [ 0.687276] ACPI: PCI Interrupt Link [LN4D] (IRQs 16 17 18 19) *0, disabled. [ 0.687519] ACPI: PCI Interrupt Link [LN5A] (IRQs 16 17 18 19) *0, disabled. [ 0.687761] ACPI: PCI Interrupt Link [LN5B] (IRQs 16 17 18 19) *0, disabled. [ 0.688005] ACPI: PCI Interrupt Link [LN5C] (IRQs 16 17 18 19) *0, disabled. [ 0.688249] ACPI: PCI Interrupt Link [LN5D] (IRQs 16 17 18 19) *0, disabled. [ 0.688491] ACPI: PCI Interrupt Link [LN6A] (IRQs 16 17 18 19) *0, disabled. [ 0.688734] ACPI: PCI Interrupt Link [LN6B] (IRQs 16 17 18 19) *0, disabled. [ 0.688976] ACPI: PCI Interrupt Link [LN6C] (IRQs 16 17 18 19) *0, disabled. [ 0.689219] ACPI: PCI Interrupt Link [LN6D] (IRQs 16 17 18 19) *0, disabled. [ 0.689463] ACPI: PCI Interrupt Link [LN7A] (IRQs 16 17 18 19) *0, disabled. [ 0.689705] ACPI: PCI Interrupt Link [LN7B] (IRQs 16 17 18 19) *0, disabled. [ 0.689948] ACPI: PCI Interrupt Link [LN7C] (IRQs 16 17 18 19) *0, disabled. [ 0.690220] ACPI: PCI Interrupt Link [LN7D] (IRQs 16 17 18 19) *0, disabled. [ 0.690468] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *15 [ 0.690716] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *10 [ 0.690970] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *10 [ 0.691218] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *15 [ 0.691467] ACPI: PCI Interrupt Link [SGRU] (IRQs 20 21 22 23) *7 [ 0.691713] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *10 [ 0.691959] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *11 [ 0.692206] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5 [ 0.692491] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled. [ 0.692733] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *10 [ 0.692975] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *11 [ 0.693122] SCSI subsystem initialized [ 0.693154] libata version 3.00 loaded. [ 0.693154] usbcore: registered new interface driver usbfs [ 0.693154] usbcore: registered new interface driver hub [ 0.693154] usbcore: registered new device driver usb [ 0.693154] ACPI: WMI: Mapper loaded [ 0.693154] PCI: Using ACPI for IRQ routing [ 0.720004] Bluetooth: Core ver 2.15 [ 0.720018] NET: Registered protocol family 31 [ 0.720018] Bluetooth: HCI device and connection manager initialized [ 0.720018] Bluetooth: HCI socket layer initialized [ 0.720018] NetLabel: Initializing [ 0.720018] NetLabel: domain hash size = 128 [ 0.720018] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.720029] NetLabel: unlabeled traffic allowed by default [ 0.720265] PCI-DMA: Disabling AGP. [ 0.720344] PCI-DMA: aperture base @ 20000000 size 65536 KB [ 0.720345] PCI-DMA: using GART IOMMU. [ 0.720348] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 0.721750] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 [ 0.721757] hpet0: 3 comparators, 32-bit 25.000000 MHz counter [ 0.750009] Switched to high resolution mode on CPU 0 [ 0.750674] Switched to high resolution mode on CPU 3 [ 0.750679] Switched to high resolution mode on CPU 1 [ 0.750728] Switched to high resolution mode on CPU 2 [ 0.770019] pnp: PnP ACPI init [ 0.770037] ACPI: bus type pnp registered [ 0.776235] pnp: PnP ACPI: found 13 devices [ 0.776237] ACPI: ACPI bus type pnp unregistered [ 0.776249] system 00:04: ioport range 0x4d0-0x4d1 has been reserved [ 0.776251] system 00:04: ioport range 0x800-0x80f has been reserved [ 0.776254] system 00:04: ioport range 0x2000-0x207f has been reserved [ 0.776255] system 00:04: ioport range 0x2080-0x20ff has been reserved [ 0.776257] system 00:04: ioport range 0x2400-0x247f has been reserved [ 0.776259] system 00:04: ioport range 0x2480-0x24ff has been reserved [ 0.776261] system 00:04: ioport range 0x2800-0x287f has been reserved [ 0.776263] system 00:04: ioport range 0x2880-0x28ff has been reserved [ 0.776266] system 00:04: iomem range 0xfed04000-0xfed04fff has been reserved [ 0.776269] system 00:04: iomem range 0xfee01000-0xfeefffff has been reserved [ 0.776273] system 00:07: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.776275] system 00:07: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.776279] system 00:0a: ioport range 0x290-0x29f has been reserved [ 0.776283] system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved [ 0.776286] system 00:0c: iomem range 0x0-0x9ffff could not be reserved [ 0.776288] system 00:0c: iomem range 0xc0000-0xcffff has been reserved [ 0.776295] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved [ 0.776297] system 00:0c: iomem range 0x100000-0xdfffffff could not be reserved [ 0.776300] system 00:0c: iomem range 0xfec00000-0xffffffff could not be reserved [ 0.780966] AppArmor: AppArmor Filesystem Enabled [ 0.781041] pci 0000:00:08.0: PCI bridge, secondary bus 0000:01 [ 0.781043] pci 0000:00:08.0: IO window: 0xd000-0xdfff [ 0.781047] pci 0000:00:08.0: MEM window: 0xfcf00000-0xfcffffff [ 0.781049] pci 0000:00:08.0: PREFETCH window: disabled [ 0.781052] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:02 [ 0.781054] pci 0000:00:0b.0: IO window: 0xe000-0xefff [ 0.781056] pci 0000:00:0b.0: MEM window: 0xfd000000-0xfebfffff [ 0.781059] pci 0000:00:0b.0: PREFETCH window: 0x000000f0000000-0x000000f9ffffff [ 0.781063] pci 0000:00:10.0: PCI bridge, secondary bus 0000:03 [ 0.781064] pci 0000:00:10.0: IO window: disabled [ 0.781073] pci 0000:00:10.0: MEM window: disabled [ 0.781080] pci 0000:00:10.0: PREFETCH window: 0x000000fbd00000-0x000000fbdfffff [ 0.781092] pci 0000:00:12.0: PCI bridge, secondary bus 0000:04 [ 0.781093] pci 0000:00:12.0: IO window: disabled [ 0.781102] pci 0000:00:12.0: MEM window: disabled [ 0.781109] pci 0000:00:12.0: PREFETCH window: 0x000000fbe00000-0x000000fbefffff [ 0.781121] pci 0000:00:13.0: PCI bridge, secondary bus 0000:05 [ 0.781122] pci 0000:00:13.0: IO window: disabled [ 0.781131] pci 0000:00:13.0: MEM window: disabled [ 0.781137] pci 0000:00:13.0: PREFETCH window: 0x000000fbf00000-0x000000fbffffff [ 0.781154] pci 0000:00:08.0: setting latency timer to 64 [ 0.781159] pci 0000:00:0b.0: setting latency timer to 64 [ 0.781515] ACPI: PCI Interrupt Link [LN0A] enabled at IRQ 19 [ 0.781518] alloc irq_desc for 19 on node 0 [ 0.781519] alloc kstat_irqs on node 0 [ 0.781527] pci 0000:00:10.0: PCI INT A -> Link[LN0A] -> GSI 19 (level, low) -> IRQ 19 [ 0.781534] pci 0000:00:10.0: setting latency timer to 64 [ 0.781879] ACPI: PCI Interrupt Link [LN2A] enabled at IRQ 18 [ 0.781881] alloc irq_desc for 18 on node 0 [ 0.781882] alloc kstat_irqs on node 0 [ 0.781888] pci 0000:00:12.0: PCI INT A -> Link[LN2A] -> GSI 18 (level, low) -> IRQ 18 [ 0.781895] pci 0000:00:12.0: setting latency timer to 64 [ 0.782238] ACPI: PCI Interrupt Link [LN3A] enabled at IRQ 17 [ 0.782239] alloc irq_desc for 17 on node 0 [ 0.782241] alloc kstat_irqs on node 0 [ 0.782246] pci 0000:00:13.0: PCI INT A -> Link[LN3A] -> GSI 17 (level, low) -> IRQ 17 [ 0.782254] pci 0000:00:13.0: setting latency timer to 64 [ 0.782259] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.782261] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.782264] pci_bus 0000:01: resource 0 io: [0xd000-0xdfff] [ 0.782266] pci_bus 0000:01: resource 1 mem: [0xfcf00000-0xfcffffff] [ 0.782268] pci_bus 0000:01: resource 3 io: [0x00-0xffff] [ 0.782270] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.782272] pci_bus 0000:02: resource 0 io: [0xe000-0xefff] [ 0.782274] pci_bus 0000:02: resource 1 mem: [0xfd000000-0xfebfffff] [ 0.782275] pci_bus 0000:02: resource 2 pref mem [0xf0000000-0xf9ffffff] [ 0.782280] pci_bus 0000:03: resource 2 pref mem [0xfbd00000-0xfbdfffff] [ 0.782282] pci_bus 0000:04: resource 2 pref mem [0xfbe00000-0xfbefffff] [ 0.782284] pci_bus 0000:05: resource 2 pref mem [0xfbf00000-0xfbffffff] [ 0.782317] NET: Registered protocol family 2 [ 0.782472] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.783608] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.786887] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.787298] TCP: Hash tables configured (established 524288 bind 65536) [ 0.787300] TCP reno registered [ 0.787397] NET: Registered protocol family 1 [ 0.787454] Trying to unpack rootfs image as initramfs... [ 0.932091] Freeing initrd memory: 7672k freed [ 0.935507] Scanning for low memory corruption every 60 seconds [ 0.935616] audit: initializing netlink socket (disabled) [ 0.935630] type=2000 audit(1263212835.930:1): initialized [ 0.942669] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.943921] VFS: Disk quotas dquot_6.5.2 [ 0.943969] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.944486] fuse init (API version 7.12) [ 0.944553] msgmni has been set to 6917 [ 0.944776] alg: No test for stdrng (krng) [ 0.944786] io scheduler noop registered [ 0.944788] io scheduler anticipatory registered [ 0.944790] io scheduler deadline registered [ 0.944825] io scheduler cfq registered (default) [ 0.990127] pci 0000:00:08.0: Enabling HT MSI Mapping [ 0.990226] pci 0000:00:09.0: Enabling HT MSI Mapping [ 0.990330] pci 0000:00:0a.0: Enabling HT MSI Mapping [ 0.990433] pci 0000:00:0b.0: Enabling HT MSI Mapping [ 0.990609] pci 0000:02:00.0: Boot video device [ 0.990945] alloc irq_desc for 24 on node 0 [ 0.990947] alloc kstat_irqs on node 0 [ 0.990966] pcieport-driver 0000:00:10.0: irq 24 for MSI/MSI-X [ 0.990985] pcieport-driver 0000:00:10.0: setting latency timer to 64 [ 0.991370] alloc irq_desc for 25 on node 0 [ 0.991372] alloc kstat_irqs on node 0 [ 0.991387] pcieport-driver 0000:00:12.0: irq 25 for MSI/MSI-X [ 0.991405] pcieport-driver 0000:00:12.0: setting latency timer to 64 [ 0.991781] alloc irq_desc for 26 on node 0 [ 0.991782] alloc kstat_irqs on node 0 [ 0.991797] pcieport-driver 0000:00:13.0: irq 26 for MSI/MSI-X [ 0.991815] pcieport-driver 0000:00:13.0: setting latency timer to 64 [ 0.991969] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.991986] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.992092] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.992096] ACPI: Power Button [PWRF] [ 0.992143] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 0.992145] ACPI: Power Button [PWRB] [ 0.992473] processor LNXCPU:00: registered as cooling_device0 [ 0.992496] processor LNXCPU:01: registered as cooling_device1 [ 0.992522] processor LNXCPU:02: registered as cooling_device2 [ 0.992547] processor LNXCPU:03: registered as cooling_device3 [ 0.998936] Linux agpgart interface v0.103 [ 0.998944] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.999040] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.999268] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.999934] brd: module loaded [ 1.000432] loop: module loaded [ 1.000486] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 1.000566] ahci 0000:00:09.0: version 3.0 [ 1.000919] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23 [ 1.000922] alloc irq_desc for 23 on node 0 [ 1.000924] alloc kstat_irqs on node 0 [ 1.000932] ahci 0000:00:09.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23 [ 1.000960] alloc irq_desc for 27 on node 0 [ 1.000961] alloc kstat_irqs on node 0 [ 1.000966] ahci 0000:00:09.0: irq 27 for MSI/MSI-X [ 1.001023] ahci 0000:00:09.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl IDE mode [ 1.001026] ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pmp pio [ 1.001028] ahci 0000:00:09.0: setting latency timer to 64 [ 1.001422] scsi0 : ahci [ 1.001504] scsi1 : ahci [ 1.001542] scsi2 : ahci [ 1.001581] scsi3 : ahci [ 1.001625] scsi4 : ahci [ 1.001666] scsi5 : ahci [ 1.001755] ata1: SATA max UDMA/133 abar m8192@0xfce76000 port 0xfce76100 irq 27 [ 1.001758] ata2: SATA max UDMA/133 abar m8192@0xfce76000 port 0xfce76180 irq 27 [ 1.001760] ata3: SATA max UDMA/133 abar m8192@0xfce76000 port 0xfce76200 irq 27 [ 1.001762] ata4: SATA max UDMA/133 abar m8192@0xfce76000 port 0xfce76280 irq 27 [ 1.001764] ata5: SATA max UDMA/133 abar m8192@0xfce76000 port 0xfce76300 irq 27 [ 1.001766] ata6: SATA max UDMA/133 abar m8192@0xfce76000 port 0xfce76380 irq 27 [ 1.001974] pata_amd 0000:00:06.0: version 0.4.1 [ 1.002000] pata_amd 0000:00:06.0: setting latency timer to 64 [ 1.002068] scsi6 : pata_amd [ 1.002107] scsi7 : pata_amd [ 1.003198] ata7: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 1.003204] ata8: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 1.003670] Fixed MDIO Bus: probed [ 1.003695] PPP generic driver version 2.4.2 [ 1.003762] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.004139] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22 [ 1.004141] alloc irq_desc for 22 on node 0 [ 1.004143] alloc kstat_irqs on node 0 [ 1.004150] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 22 (level, low) -> IRQ 22 [ 1.004160] ehci_hcd 0000:00:02.1: setting latency timer to 64 [ 1.004162] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 1.004202] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 1.004227] ehci_hcd 0000:00:02.1: debug port 1 [ 1.004230] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported [ 1.004247] ehci_hcd 0000:00:02.1: irq 22, io mem 0xfce7ec00 [ 1.020022] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00 [ 1.020075] usb usb1: configuration #1 chosen from 1 choice [ 1.020097] hub 1-0:1.0: USB hub found [ 1.020103] hub 1-0:1.0: 6 ports detected [ 1.020516] ACPI: PCI Interrupt Link [UB12] enabled at IRQ 21 [ 1.020518] alloc irq_desc for 21 on node 0 [ 1.020520] alloc kstat_irqs on node 0 [ 1.020526] ehci_hcd 0000:00:04.1: PCI INT B -> Link[UB12] -> GSI 21 (level, low) -> IRQ 21 [ 1.020532] ehci_hcd 0000:00:04.1: setting latency timer to 64 [ 1.020534] ehci_hcd 0000:00:04.1: EHCI Host Controller [ 1.020556] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 2 [ 1.020579] ehci_hcd 0000:00:04.1: debug port 1 [ 1.020582] ehci_hcd 0000:00:04.1: cache line size of 64 is not supported [ 1.020595] ehci_hcd 0000:00:04.1: irq 21, io mem 0xfce7e800 [ 1.040018] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00 [ 1.040062] usb usb2: configuration #1 chosen from 1 choice [ 1.040078] hub 2-0:1.0: USB hub found [ 1.040086] hub 2-0:1.0: 5 ports detected [ 1.040136] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.040501] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 20 [ 1.040507] alloc irq_desc for 20 on node 0 [ 1.040508] alloc kstat_irqs on node 0 [ 1.040515] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 20 (level, low) -> IRQ 20 [ 1.040522] ohci_hcd 0000:00:02.0: setting latency timer to 64 [ 1.040524] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 1.040546] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3 [ 1.040568] ohci_hcd 0000:00:02.0: irq 20, io mem 0xfce7f000 [ 1.102070] usb usb3: configuration #1 chosen from 1 choice [ 1.102088] hub 3-0:1.0: USB hub found [ 1.102095] hub 3-0:1.0: 6 ports detected [ 1.102496] ACPI: PCI Interrupt Link [UB11] enabled at IRQ 23 [ 1.102499] ohci_hcd 0000:00:04.0: PCI INT A -> Link[UB11] -> GSI 23 (level, low) -> IRQ 23 [ 1.102506] ohci_hcd 0000:00:04.0: setting latency timer to 64 [ 1.102508] ohci_hcd 0000:00:04.0: OHCI Host Controller [ 1.102531] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 4 [ 1.102550] ohci_hcd 0000:00:04.0: irq 23, io mem 0xfce7d000 [ 1.130023] hub 1-0:1.0: over-current change on port 1 [ 1.162060] usb usb4: configuration #1 chosen from 1 choice [ 1.162076] hub 4-0:1.0: USB hub found [ 1.162085] hub 4-0:1.0: 5 ports detected [ 1.162135] uhci_hcd: USB Universal Host Controller Interface driver [ 1.162208] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 1.162209] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 1.162666] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.162714] mice: PS/2 mouse device common for all mice [ 1.162788] rtc_cmos 00:06: RTC can wake from S4 [ 1.162814] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 [ 1.162868] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs [ 1.162968] device-mapper: uevent: version 1.0.3 [ 1.163048] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 1.163140] device-mapper: multipath: version 1.1.0 loaded [ 1.163143] device-mapper: multipath round-robin: version 1.0.0 loaded [ 1.163355] cpuidle: using governor ladder [ 1.163357] cpuidle: using governor menu [ 1.163681] TCP cubic registered [ 1.163784] NET: Registered protocol family 10 [ 1.164150] lo: Disabled Privacy Extensions [ 1.164393] NET: Registered protocol family 17 [ 1.164409] Bluetooth: L2CAP ver 2.13 [ 1.164410] Bluetooth: L2CAP socket layer initialized [ 1.164412] Bluetooth: SCO (Voice Link) ver 0.6 [ 1.164413] Bluetooth: SCO socket layer initialized [ 1.164440] Bluetooth: RFCOMM TTY layer initialized [ 1.164442] Bluetooth: RFCOMM socket layer initialized [ 1.164444] Bluetooth: RFCOMM ver 1.11 [ 1.164460] powernow-k8: Found 1 AMD Phenom(tm) 9950 Quad-Core Processor processors (4 cpu cores) (version 2.20.00) [ 1.164484] powernow-k8: 0 : pstate 0 (2600 MHz) [ 1.164486] powernow-k8: 1 : pstate 1 (1300 MHz) [ 1.164794] PM: Resume from disk failed. [ 1.164804] registered taskstats version 1 [ 1.164914] Magic number: 10:990:480 [ 1.165033] rtc_cmos 00:06: setting system clock to 2010-01-11 12:27:16 UTC (1263212836) [ 1.165035] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.165037] EDD information not available. [ 1.182820] ata7.00: ATAPI: ASUS DRW-1612BL, 1.06, max UDMA/66 [ 1.182842] ata7: nv_mode_filter: 0x1f39f&0x1f39f->0x1f39f, BIOS=0x1f000 (0xc5000000) ACPI=0x1f01f (30:900:0x11) [ 1.185136] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 1.222750] ata7.00: configured for UDMA/66 [ 1.240013] hub 1-0:1.0: over-current change on port 2 [ 1.350010] ata5: SATA link down (SStatus 0 SControl 300) [ 1.350031] ata3: SATA link down (SStatus 0 SControl 300) [ 1.350040] ata6: SATA link down (SStatus 0 SControl 300) [ 1.530008] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.530018] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.530024] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.530557] ata2.00: ATA-8: WDC WD3200AAJS-65M0A0, 01.03E01, max UDMA/133 [ 1.530560] ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 1.531118] ata4.00: ATAPI: TSSTcorp CDDVDW SH-S203P, SB00, max UDMA/100, ATAPI AN [ 1.531173] ata2.00: configured for UDMA/133 [ 1.532303] ata4.00: configured for UDMA/100 [ 1.536344] ata1.00: ATA-7: SAMSUNG HD103SI, 1AG01118, max UDMA7 [ 1.536346] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 1.542754] ata1.00: configured for UDMA/133 [ 1.542851] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD103SI 1AG0 PQ: 0 ANSI: 5 [ 1.542953] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.542991] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 1.543020] sd 0:0:0:0: [sda] Write Protect is off [ 1.543022] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.543038] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.543056] scsi 1:0:0:0: Direct-Access ATA WDC WD3200AAJS-6 01.0 PQ: 0 ANSI: 5 [ 1.543135] sda: [ 1.543153] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 1.543189] sd 1:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 1.543219] sd 1:0:0:0: [sdb] Write Protect is off [ 1.543221] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.543235] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.543331] sdb: [ 1.543934] scsi 3:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S203P SB00 PQ: 0 ANSI: 5 [ 1.547470] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.547473] Uniform CD-ROM driver Revision: 3.20 [ 1.547539] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 1.547570] sr 3:0:0:0: Attached scsi generic sg2 type 5 [ 1.548101] scsi 6:0:0:0: CD-ROM ASUS DRW-1612BL 1.06 PQ: 0 ANSI: 5 [ 1.550014] sr1: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.550058] sr 6:0:0:0: Attached scsi CD-ROM sr1 [ 1.550081] sr 6:0:0:0: Attached scsi generic sg3 type 5 [ 1.550107] ata8: port disabled. ignoring. [ 1.553248] sdb1 sdb3 sdb4 [ 1.557097] sda1 sda2 [ 1.557249] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.567647] sd 1:0:0:0: [sdb] Attached SCSI disk [ 1.567658] Freeing unused kernel memory: 660k freed [ 1.567887] Write protecting the kernel read-only data: 7584k [ 1.660418] [Firmware Bug]: ACPI(IGPU) defines _DOD but not _DOS [ 1.660627] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:19/device:1a/input/input4 [ 1.660666] ACPI: Video Device [IGPU] (multi-head: yes rom: no post: no) [ 1.671392] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 1.671852] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 22 [ 1.671858] forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 22 (level, low) -> IRQ 22 [ 1.671862] forcedeth 0000:00:0a.0: setting latency timer to 64 [ 1.678228] <6>8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 1.679601] 8139cp 0000:01:0a.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too [ 1.682026] 8139too Fast Ethernet driver 0.9.28 [ 1.682540] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 16 [ 1.682547] alloc irq_desc for 16 on node 0 [ 1.682549] alloc kstat_irqs on node 0 [ 1.682560] 8139too 0000:01:0a.0: PCI INT A -> Link[LNKC] -> GSI 16 (level, low) -> IRQ 16 [ 1.683417] eth0: RealTek RTL8139 at 0xd400, 00:06:4f:45:cc:d7, IRQ 16 [ 1.760024] usb 4-4: new low speed USB device using ohci_hcd and address 2 [ 1.979978] usb 4-4: configuration #1 chosen from 1 choice [ 1.985958] hub 2-0:1.0: over-current change on port 1 [ 1.989859] usbcore: registered new interface driver hiddev [ 1.996102] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:04.0/usb4/4-4/4-4:1.0/input/input5 [ 1.996159] generic-usb 0003:093A:2510.0001: input,hidraw0: USB HID v1.10 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:04.0-4/input0 [ 1.996173] usbcore: registered new interface driver usbhid [ 1.996176] usbhid: v2.6:USB HID core driver [ 2.093769] hub 2-0:1.0: over-current change on port 2 [ 2.191128] forcedeth 0000:00:0a.0: ifname eth1, PHY OUI 0x732 @ 1, addr 00:19:66:aa:e2:82 [ 2.191131] forcedeth 0000:00:0a.0: highdma csum pwrctl mgmt gbit lnktim msi desc-v3 [ 3.054963] PM: Starting manual resume from disk [ 3.054967] PM: Resume from partition 8:19 [ 3.054968] PM: Checking hibernation image. [ 3.055087] PM: Resume from disk failed. [ 3.593612] type=1505 audit(1263212838.918:2): operation="profile_load" pid=459 name=/usr/share/gdm/guest-session/Xsession [ 3.605588] type=1505 audit(1263212838.938:3): operation="profile_load" pid=460 name=/sbin/dhclient3 [ 3.605815] type=1505 audit(1263212838.938:4): operation="profile_load" pid=460 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 3.605948] type=1505 audit(1263212838.938:5): operation="profile_load" pid=460 name=/usr/lib/connman/scripts/dhclient-script [ 3.622391] type=1505 audit(1263212838.948:6): operation="profile_load" pid=461 name=/usr/bin/evince [ 3.626213] type=1505 audit(1263212838.958:7): operation="profile_load" pid=461 name=/usr/bin/evince-previewer [ 3.628361] type=1505 audit(1263212838.958:8): operation="profile_load" pid=461 name=/usr/bin/evince-thumbnailer [ 3.644247] type=1505 audit(1263212838.978:9): operation="profile_load" pid=463 name=/usr/lib/cups/backend/cups-pdf [ 3.644528] type=1505 audit(1263212838.978:10): operation="profile_load" pid=463 name=/usr/sbin/cupsd [ 14.102852] udev: starting version 147 [ 14.110637] lp: driver loaded but no devices found [ 14.119510] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x2d00 [ 14.119518] ACPI: I/O resource nForce2_smbus [0x2e00-0x2e3f] conflicts with ACPI region SM00 [0x2e00-0x2e3f] [ 14.119521] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 14.119523] nForce2_smbus 0000:00:01.1: Error probing SMB2. [ 14.130882] EDAC MC: Ver: 2.1.0 Dec 10 2009 [ 14.133542] EDAC amd64_edac: Ver: 3.2.0 Dec 10 2009 [ 14.134995] EDAC amd64: This node reports that Memory ECC is currently disabled. [ 14.135000] EDAC amd64: bit 0x400000 in register F3x44 of the MISC_CONTROL device (0000:00:18.3) should be enabled [ 14.135003] EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded. [ 14.135004] Either Enable ECC in the BIOS, or use the 'ecc_enable_override' parameter. [ 14.135005] Might be a BIOS bug, if BIOS says ECC is enabled [ 14.135006] Use of the override can cause unknown side effects. [ 14.135058] amd64_edac: probe of 0000:00:18.2 failed with error -22 [ 14.135208] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 14.142989] Adding 3976076k swap on /dev/sdb3. Priority:-1 extents:1 across:3976076k [ 14.195134] nvidia: module license 'NVIDIA' taints kernel. [ 14.195140] Disabling lock debugging due to kernel taint [ 14.236330] ip_tables: (C) 2000-2006 Netfilter Core Team [ 14.377453] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 19 [ 14.377459] C-Media PCI 0000:01:09.0: PCI INT A -> Link[LNKB] -> GSI 19 (level, low) -> IRQ 19 [ 14.452205] ACPI: PCI Interrupt Link [SGRU] enabled at IRQ 21 [ 14.452211] nvidia 0000:02:00.0: PCI INT A -> Link[SGRU] -> GSI 21 (level, low) -> IRQ 21 [ 14.452219] nvidia 0000:02:00.0: setting latency timer to 64 [ 14.452402] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 185.18.36 Fri Aug 14 17:35:21 PDT 2009 [ 15.920027] kjournald starting. Commit interval 5 seconds [ 15.941807] EXT3 FS on sda1, internal journal [ 15.941814] EXT3-fs: mounted filesystem with writeback data mode. [ 17.826543] kjournald starting. Commit interval 5 seconds [ 17.826768] EXT3 FS on sda2, internal journal [ 17.826774] EXT3-fs: mounted filesystem with writeback data mode. [ 17.914997] __ratelimit: 6 callbacks suppressed [ 17.915000] type=1505 audit(1263212853.248:13): operation="profile_replace" pid=1031 name=/usr/share/gdm/guest-session/Xsession [ 17.916187] type=1505 audit(1263212853.248:14): operation="profile_replace" pid=1032 name=/sbin/dhclient3 [ 17.916416] type=1505 audit(1263212853.248:15): operation="profile_replace" pid=1032 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 17.916543] type=1505 audit(1263212853.248:16): operation="profile_replace" pid=1032 name=/usr/lib/connman/scripts/dhclient-script [ 17.919239] type=1505 audit(1263212853.248:17): operation="profile_replace" pid=1033 name=/usr/bin/evince [ 17.923004] type=1505 audit(1263212853.248:18): operation="profile_replace" pid=1033 name=/usr/bin/evince-previewer [ 17.925156] type=1505 audit(1263212853.258:19): operation="profile_replace" pid=1033 name=/usr/bin/evince-thumbnailer [ 17.929249] type=1505 audit(1263212853.258:20): operation="profile_replace" pid=1035 name=/usr/lib/cups/backend/cups-pdf [ 17.929524] type=1505 audit(1263212853.258:21): operation="profile_replace" pid=1035 name=/usr/sbin/cupsd [ 17.930735] type=1505 audit(1263212853.258:22): operation="profile_replace" pid=1036 name=/usr/sbin/mysqld-akonadi [ 17.996756] eth0: link down [ 17.997260] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 17.999210] alloc irq_desc for 28 on node 0 [ 17.999213] alloc kstat_irqs on node 0 [ 17.999221] forcedeth 0000:00:0a.0: irq 28 for MSI/MSI-X