[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.31-14-generic (buildd@rothera) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #48-Ubuntu SMP Fri Oct 16 14:04:26 UTC 2009 (Ubuntu 2.6.31-14.48-generic) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable) [ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000005bf00000 (usable) [ 0.000000] BIOS-e820: 000000005bf00000 - 000000005bf15000 (ACPI data) [ 0.000000] BIOS-e820: 000000005bf15000 - 000000005bf80000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000005bf80000 - 0000000060000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] DMI present. [ 0.000000] last_pfn = 0x5bf00 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-D3FFF write-protect [ 0.000000] D4000-E3FFF uncachable [ 0.000000] E4000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FFC0000000 write-back [ 0.000000] 1 base 0040000000 mask FFE0000000 write-back [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009dc00 (usable) [ 0.000000] modified: 000000000009dc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000d2000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000005bf00000 (usable) [ 0.000000] modified: 000000005bf00000 - 000000005bf15000 (ACPI data) [ 0.000000] modified: 000000005bf15000 - 000000005bf80000 (ACPI NVS) [ 0.000000] modified: 000000005bf80000 - 0000000060000000 (reserved) [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000 [ 0.000000] RAMDISK: 37865000 - 37fefeba [ 0.000000] Allocated new RAMDISK: 008ad000 - 01037eba [ 0.000000] Move RAMDISK from 0000000037865000 - 0000000037fefeb9 to 008ad000 - 01037eb9 [ 0.000000] ACPI: RSDP 000f88f0 00014 (v00 HP ) [ 0.000000] ACPI: RSDT 5bf0bd23 0003C (v01 HPQOEM SLIC-MPC 06040000 LTP 00000000) [ 0.000000] ACPI: FACP 5bf14d10 00074 (v01 HP MCP51M 06040000 PTL_ 000F4240) [ 0.000000] ACPI: DSDT 5bf0bd5f 08FB1 (v01 HP MCP51M 06040000 MSFT 03000000) [ 0.000000] ACPI: FACS 5bf15fc0 00040 [ 0.000000] ACPI: SSDT 5bf14d84 00182 (v01 PTLTD POWERNOW 06040000 LTP 00000001) [ 0.000000] ACPI: MCFG 5bf14f06 0003C (v01 HP MCFG 06040000 LTP 00000000) [ 0.000000] ACPI: HPET 5bf14f42 00038 (v01 PTLTD HPETTBL 06040000 LTP 00000001) [ 0.000000] ACPI: APIC 5bf14f7a 0005E (v01 HP APIC 06040000 LTP 00000000) [ 0.000000] ACPI: BOOT 5bf14fd8 00028 (v01 HP $SBFTBL$ 06040000 LTP 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 583MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00008000 - 0000ef00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008a80a0] TEXT DATA BSS ==> [0000100000 - 00008a80a0] [ 0.000000] #4 [000009dc00 - 0000100000] BIOS reserved ==> [000009dc00 - 0000100000] [ 0.000000] #5 [00008a9000 - 00008ac128] BRK ==> [00008a9000 - 00008ac128] [ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] [ 0.000000] #7 [00008ad000 - 0001037eba] NEW RAMDISK ==> [00008ad000 - 0001037eba] [ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] [ 0.000000] found SMP MP-table at [c00f8920] f8920 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0005bf00 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000002 [ 0.000000] 0: 0x00000006 -> 0x0000009d [ 0.000000] 0: 0x00000100 -> 0x0005bf00 [ 0.000000] On node 0 totalpages: 376473 [ 0.000000] free_area_init_node: node 0, pgdat c0784900, node_mem_map c1038000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3961 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 1167 pages used for memmap [ 0.000000] HighMem zone: 148083 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000 [ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 60000000 (gap: 60000000:80000000) [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages at c1bbf000, static data 35612 bytes [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 373530 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-14-generic root=/dev/sda5 loop=/ubuntu/disks/root.disk ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 7531520 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:0005bf00) [ 0.000000] Memory: 1469340k/1506304k available (4565k kernel code, 35676k reserved, 2143k data, 540k init, 597000k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc078e000 - 0xc0815000 ( 540 kB) [ 0.000000] .data : 0xc0575554 - 0xc078d308 (2143 kB) [ 0.000000] .text : 0xc0100000 - 0xc0575554 (4565 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] NR_IRQS:2304 nr_irqs:424 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1607.307 MHz processor. [ 0.000012] spurious 8259A interrupt: IRQ7. [ 0.003137] Console: colour VGA+ 80x25 [ 0.003140] console [tty0] enabled [ 0.003360] hpet clockevent registered [ 0.003364] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.003371] Calibrating delay loop (skipped), value calculated using timer frequency.. 3214.61 BogoMIPS (lpj=6429228) [ 0.003395] Security Framework initialized [ 0.003419] AppArmor: AppArmor initialized [ 0.003427] Mount-cache hash table entries: 512 [ 0.003566] Initializing cgroup subsys ns [ 0.003571] Initializing cgroup subsys cpuacct [ 0.003576] Initializing cgroup subsys memory [ 0.003583] Initializing cgroup subsys freezer [ 0.003586] Initializing cgroup subsys net_cls [ 0.003600] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.003603] CPU: L2 Cache: 256K (64 bytes/line) [ 0.003606] CPU: Physical Processor ID: 0 [ 0.003608] CPU: Processor Core ID: 0 [ 0.003612] mce: CPU supports 5 MCE banks [ 0.003623] using C1E aware idle routine [ 0.003631] Performance Counters: AMD PMU driver. [ 0.003639] ... version: 0 [ 0.003641] ... bit width: 48 [ 0.003643] ... generic counters: 4 [ 0.003646] ... value mask: 0000ffffffffffff [ 0.003648] ... max period: 00007fffffffffff [ 0.003651] ... fixed-purpose counters: 0 [ 0.003653] ... counter mask: 000000000000000f [ 0.003659] Checking 'hlt' instruction... OK. [ 0.018549] ACPI: Core revision 20090521 [ 0.032605] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.073560] CPU0: AMD Turion(tm) 64 X2 Mobile Technology TL-50 stepping 02 [ 0.076001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.004000] Initializing CPU#1 [ 0.004000] Calibrating delay using timer specific routine.. 3214.57 BogoMIPS (lpj=6429140) [ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.004000] CPU: L2 Cache: 256K (64 bytes/line) [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 1 [ 0.004000] mce: CPU supports 5 MCE banks [ 0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.160449] CPU1: AMD Turion(tm) 64 X2 Mobile Technology TL-50 stepping 02 [ 0.160480] Brought up 2 CPUs [ 0.160483] Total of 2 processors activated (6429.18 BogoMIPS). [ 0.160478] System has AMD C1E enabled [ 0.160478] Switch to broadcast mode on CPU1 [ 0.160600] CPU0 attaching sched-domain: [ 0.160605] domain 0: span 0-1 level MC [ 0.160609] groups: 0 1 [ 0.160616] CPU1 attaching sched-domain: [ 0.160619] domain 0: span 0-1 level MC [ 0.160622] groups: 1 0 [ 0.160711] Switch to broadcast mode on CPU0 [ 0.160711] Booting paravirtualized kernel on bare hardware [ 0.160711] regulator: core version 0.5 [ 0.160711] Time: 9:39:19 Date: 11/03/09 [ 0.160711] NET: Registered protocol family 16 [ 0.160711] EISA bus registered [ 0.160711] ACPI: bus type pci registered [ 0.160711] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 6 [ 0.160711] PCI: MCFG area at e0000000 reserved in E820 [ 0.160711] PCI: Using MMCONFIG for extended config space [ 0.160711] PCI: Using configuration type 1 for base access [ 0.161498] bio: create slab at 0 [ 0.161498] ACPI: EC: Look up EC in DSDT [ 0.166180] ACPI: BIOS _OSI(Linux) query ignored [ 0.166626] ACPI: Interpreter enabled [ 0.166632] ACPI: (supports S0 S3 S4 S5) [ 0.166656] ACPI: Using IOAPIC for interrupt routing [ 0.164025] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 0.183764] ACPI: EC: GPE = 0x10, I/O: command/status = 0x66, data = 0x62 [ 0.183768] ACPI: EC: driver started in interrupt mode [ 0.184060] ACPI: No dock devices found. [ 0.184189] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.184490] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.184494] pci 0000:00:02.0: PME# disabled [ 0.184536] pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.184539] pci 0000:00:03.0: PME# disabled [ 0.184564] pci 0000:00:05.0: reg 10 32bit mmio: [0xb2000000-0xb2ffffff] [ 0.184571] pci 0000:00:05.0: reg 14 64bit mmio: [0xc0000000-0xcfffffff] [ 0.184578] pci 0000:00:05.0: reg 1c 64bit mmio: [0xb1000000-0xb1ffffff] [ 0.184584] pci 0000:00:05.0: reg 30 32bit mmio: [0x000000-0x01ffff] [ 0.184777] pci 0000:00:0a.0: reg 10 io port: [0x1d00-0x1d7f] [ 0.184843] pci 0000:00:0a.1: reg 20 io port: [0x3040-0x307f] [ 0.184849] pci 0000:00:0a.1: reg 24 io port: [0x3000-0x303f] [ 0.184876] pci 0000:00:0a.1: PME# supported from D3hot D3cold [ 0.184882] pci 0000:00:0a.1: PME# disabled [ 0.184918] pci 0000:00:0a.3: reg 10 32bit mmio: [0xb0040000-0xb007ffff] [ 0.185018] pci 0000:00:0b.0: reg 10 32bit mmio: [0xb0004000-0xb0004fff] [ 0.185055] pci 0000:00:0b.0: supports D1 D2 [ 0.185058] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.185064] pci 0000:00:0b.0: PME# disabled [ 0.185099] pci 0000:00:0b.1: reg 10 32bit mmio: [0xb0005000-0xb00050ff] [ 0.185136] pci 0000:00:0b.1: supports D1 D2 [ 0.185138] pci 0000:00:0b.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.185144] pci 0000:00:0b.1: PME# disabled [ 0.185187] pci 0000:00:0d.0: reg 20 io port: [0x3080-0x308f] [ 0.185236] pci 0000:00:0e.0: reg 10 io port: [0x30c0-0x30c7] [ 0.185242] pci 0000:00:0e.0: reg 14 io port: [0x30b4-0x30b7] [ 0.185248] pci 0000:00:0e.0: reg 18 io port: [0x30b8-0x30bf] [ 0.185254] pci 0000:00:0e.0: reg 1c io port: [0x30b0-0x30b3] [ 0.185260] pci 0000:00:0e.0: reg 20 io port: [0x3090-0x309f] [ 0.185266] pci 0000:00:0e.0: reg 24 32bit mmio: [0xb0006000-0xb0006fff] [ 0.185363] pci 0000:00:10.1: reg 10 32bit mmio: [0xb0000000-0xb0003fff] [ 0.185401] pci 0000:00:10.1: PME# supported from D3hot D3cold [ 0.185406] pci 0000:00:10.1: PME# disabled [ 0.185443] pci 0000:00:14.0: reg 10 32bit mmio: [0xb0008000-0xb0008fff] [ 0.185449] pci 0000:00:14.0: reg 14 io port: [0x30e0-0x30e7] [ 0.185475] pci 0000:00:14.0: supports D1 D2 [ 0.185478] pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.185482] pci 0000:00:14.0: PME# disabled [ 0.185614] pci 0000:00:02.0: bridge io port: [0x4000-0x4fff] [ 0.185618] pci 0000:00:02.0: bridge 32bit mmio: [0xb4000000-0xb5ffffff] [ 0.185623] pci 0000:00:02.0: bridge 64bit mmio pref: [0xd0000000-0xd01fffff] [ 0.185658] pci 0000:03:00.0: reg 10 32bit mmio: [0xb6000000-0xb6003fff] [ 0.185706] pci 0000:03:00.0: supports D1 D2 [ 0.185756] pci 0000:00:03.0: bridge 32bit mmio: [0xb6000000-0xb7ffffff] [ 0.185793] pci 0000:07:05.0: reg 10 32bit mmio: [0xb8000000-0xb80007ff] [ 0.185832] pci 0000:07:05.0: supports D1 D2 [ 0.185835] pci 0000:07:05.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.185840] pci 0000:07:05.0: PME# disabled [ 0.185869] pci 0000:07:05.1: reg 10 32bit mmio: [0xb8000800-0xb80008ff] [ 0.185908] pci 0000:07:05.1: supports D1 D2 [ 0.185911] pci 0000:07:05.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.185916] pci 0000:07:05.1: PME# disabled [ 0.185945] pci 0000:07:05.2: reg 10 32bit mmio: [0xb8000c00-0xb8000cff] [ 0.185984] pci 0000:07:05.2: supports D1 D2 [ 0.185987] pci 0000:07:05.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.185991] pci 0000:07:05.2: PME# disabled [ 0.186021] pci 0000:07:05.3: reg 10 32bit mmio: [0xb8001000-0xb80010ff] [ 0.186059] pci 0000:07:05.3: supports D1 D2 [ 0.186062] pci 0000:07:05.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.186067] pci 0000:07:05.3: PME# disabled [ 0.186096] pci 0000:07:05.4: reg 10 32bit mmio: [0xb8001400-0xb80014ff] [ 0.186135] pci 0000:07:05.4: supports D1 D2 [ 0.186138] pci 0000:07:05.4: PME# supported from D0 D1 D2 D3hot D3cold [ 0.186143] pci 0000:07:05.4: PME# disabled [ 0.186180] pci 0000:00:10.0: transparent bridge [ 0.186185] pci 0000:00:10.0: bridge 32bit mmio: [0xb8000000-0xb80fffff] [ 0.186197] pci_bus 0000:00: on NUMA node 0 [ 0.186202] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.186327] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT] [ 0.186373] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR1._PRT] [ 0.186416] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT] [ 0.222519] ACPI: PCI Interrupt Link [LNK1] (IRQs 5) *0, disabled. [ 0.222735] ACPI: PCI Interrupt Link [LNK2] (IRQs 7) *11 [ 0.222948] ACPI: PCI Interrupt Link [LNK3] (IRQs 10) *11 [ 0.223160] ACPI: PCI Interrupt Link [LNK4] (IRQs 11) *0, disabled. [ 0.223372] ACPI: PCI Interrupt Link [LK1E] (IRQs 16) *0, disabled. [ 0.223585] ACPI: PCI Interrupt Link [LK2E] (IRQs 17) *0, disabled. [ 0.223797] ACPI: PCI Interrupt Link [LK3E] (IRQs 18) *11 [ 0.224015] ACPI: PCI Interrupt Link [LK4E] (IRQs 19) *0, disabled. [ 0.224228] ACPI: PCI Interrupt Link [LSMB] (IRQs *10) [ 0.224440] ACPI: PCI Interrupt Link [LPMU] (IRQs 11) *10 [ 0.224652] ACPI: PCI Interrupt Link [LUS0] (IRQs 22) *11 [ 0.224864] ACPI: PCI Interrupt Link [LUS2] (IRQs 22) *7 [ 0.225076] ACPI: PCI Interrupt Link [LMAC] (IRQs 20) *10 [ 0.225287] ACPI: PCI Interrupt Link [LAZA] (IRQs 21) *0, disabled. [ 0.225500] ACPI: PCI Interrupt Link [LACI] (IRQs 21) *0, disabled. [ 0.225713] ACPI: PCI Interrupt Link [LMCI] (IRQs 21) *0, disabled. [ 0.225926] ACPI: PCI Interrupt Link [LPID] (IRQs 21) *0, disabled. [ 0.226147] ACPI: PCI Interrupt Link [LTID] (IRQs 23) *5 [ 0.226366] ACPI: PCI Interrupt Link [LSI1] (IRQs 20) *10 [ 0.226595] SCSI subsystem initialized [ 0.228031] libata version 3.00 loaded. [ 0.228061] usbcore: registered new interface driver usbfs [ 0.228061] usbcore: registered new interface driver hub [ 0.228064] usbcore: registered new device driver usb [ 0.228095] ACPI: WMI: Mapper loaded [ 0.228097] PCI: Using ACPI for IRQ routing [ 0.240013] Bluetooth: Core ver 2.15 [ 0.244016] NET: Registered protocol family 31 [ 0.244019] Bluetooth: HCI device and connection manager initialized [ 0.244023] Bluetooth: HCI socket layer initialized [ 0.244025] NetLabel: Initializing [ 0.244027] NetLabel: domain hash size = 128 [ 0.244029] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.244045] NetLabel: unlabeled traffic allowed by default [ 0.244090] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 [ 0.244097] hpet0: 3 comparators, 32-bit 25.000000 MHz counter [ 0.256026] Switched to high resolution mode on CPU 0 [ 0.256043] Switched to high resolution mode on CPU 1 [ 0.261048] pnp: PnP ACPI init [ 0.261067] ACPI: bus type pnp registered [ 0.264653] pnp: PnP ACPI: found 13 devices [ 0.264656] ACPI: ACPI bus type pnp unregistered [ 0.264660] PnPBIOS: Disabled by ACPI PNP [ 0.264674] system 00:00: iomem range 0xe0000000-0xefffffff has been reserved [ 0.264683] system 00:01: iomem range 0xffc00000-0xffffffff could not be reserved [ 0.264687] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.264692] system 00:01: iomem range 0xfee00000-0xfeefffff could not be reserved [ 0.264696] system 00:01: iomem range 0xfed00000-0xfed00fff has been reserved [ 0.264704] system 00:03: iomem range 0xe0000000-0xefffffff has been reserved [ 0.264712] system 00:04: ioport range 0x1000-0x107f has been reserved [ 0.264716] system 00:04: ioport range 0x1080-0x10ff has been reserved [ 0.264720] system 00:04: ioport range 0x1400-0x147f has been reserved [ 0.264724] system 00:04: ioport range 0x1480-0x14ff has been reserved [ 0.264728] system 00:04: ioport range 0x1800-0x187f has been reserved [ 0.264732] system 00:04: ioport range 0x1880-0x18ff has been reserved [ 0.264736] system 00:04: ioport range 0x2000-0x203f has been reserved [ 0.264744] system 00:05: ioport range 0x360-0x361 has been reserved [ 0.264748] system 00:05: ioport range 0x380-0x383 has been reserved [ 0.264752] system 00:05: ioport range 0x4d0-0x4d1 has been reserved [ 0.299460] AppArmor: AppArmor Filesystem Enabled [ 0.299514] pci 0000:00:02.0: PCI bridge, secondary bus 0000:01 [ 0.299518] pci 0000:00:02.0: IO window: 0x4000-0x4fff [ 0.299523] pci 0000:00:02.0: MEM window: 0xb4000000-0xb5ffffff [ 0.299527] pci 0000:00:02.0: PREFETCH window: 0x000000d0000000-0x000000d01fffff [ 0.299533] pci 0000:00:03.0: PCI bridge, secondary bus 0000:03 [ 0.299535] pci 0000:00:03.0: IO window: disabled [ 0.299540] pci 0000:00:03.0: MEM window: 0xb6000000-0xb7ffffff [ 0.299543] pci 0000:00:03.0: PREFETCH window: disabled [ 0.299548] pci 0000:00:10.0: PCI bridge, secondary bus 0000:07 [ 0.299550] pci 0000:00:10.0: IO window: disabled [ 0.299555] pci 0000:00:10.0: MEM window: 0xb8000000-0xb80fffff [ 0.299559] pci 0000:00:10.0: PREFETCH window: disabled [ 0.299570] pci 0000:00:02.0: setting latency timer to 64 [ 0.299576] pci 0000:00:03.0: setting latency timer to 64 [ 0.299582] pci 0000:00:10.0: setting latency timer to 64 [ 0.299588] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.299591] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.299595] pci_bus 0000:01: resource 0 io: [0x4000-0x4fff] [ 0.299599] pci_bus 0000:01: resource 1 mem: [0xb4000000-0xb5ffffff] [ 0.299602] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xd01fffff] [ 0.299606] pci_bus 0000:03: resource 1 mem: [0xb6000000-0xb7ffffff] [ 0.299610] pci_bus 0000:07: resource 1 mem: [0xb8000000-0xb80fffff] [ 0.299614] pci_bus 0000:07: resource 3 io: [0x00-0xffff] [ 0.299617] pci_bus 0000:07: resource 4 mem: [0x000000-0xffffffff] [ 0.299662] NET: Registered protocol family 2 [ 0.299778] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.300180] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.301118] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.301594] TCP: Hash tables configured (established 131072 bind 65536) [ 0.301598] TCP reno registered [ 0.301704] NET: Registered protocol family 1 [ 0.301777] Trying to unpack rootfs image as initramfs... [ 0.571891] Freeing initrd memory: 7723k freed [ 0.578879] Simple Boot Flag at 0x36 set to 0x1 [ 0.579105] cpufreq-nforce2: No nForce2 chipset. [ 0.579136] Scanning for low memory corruption every 60 seconds [ 0.579254] audit: initializing netlink socket (disabled) [ 0.579271] type=2000 audit(1257241159.577:1): initialized [ 0.590650] highmem bounce pool size: 64 pages [ 0.590656] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.592432] VFS: Disk quotas dquot_6.5.2 [ 0.592509] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.593255] fuse init (API version 7.12) [ 0.593360] msgmni has been set to 1720 [ 0.593694] alg: No test for stdrng (krng) [ 0.593711] io scheduler noop registered [ 0.593714] io scheduler anticipatory registered [ 0.593717] io scheduler deadline registered [ 0.593775] io scheduler cfq registered (default) [ 0.593802] pci 0000:00:00.0: Found disabled HT MSI Mapping [ 0.593809] pci 0000:00:00.0: Enabling HT MSI Mapping [ 0.593852] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.593880] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.593888] pci 0000:00:05.0: Boot video device [ 0.812125] pci 0000:00:09.0: Found enabled HT MSI Mapping [ 0.812184] pci 0000:00:09.0: Found enabled HT MSI Mapping [ 0.812244] pci 0000:00:09.0: Found enabled HT MSI Mapping [ 0.812406] alloc irq_desc for 24 on node -1 [ 0.812409] alloc kstat_irqs on node -1 [ 0.812419] pcieport-driver 0000:00:02.0: irq 24 for MSI/MSI-X [ 0.812426] pcieport-driver 0000:00:02.0: setting latency timer to 64 [ 0.812516] alloc irq_desc for 25 on node -1 [ 0.812518] alloc kstat_irqs on node -1 [ 0.812524] pcieport-driver 0000:00:03.0: irq 25 for MSI/MSI-X [ 0.812529] pcieport-driver 0000:00:03.0: setting latency timer to 64 [ 0.812603] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.812634] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.813974] ACPI: AC Adapter [ACAD] (off-line) [ 0.814077] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.814082] ACPI: Power Button [PWRF] [ 0.814143] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 0.814147] ACPI: Power Button [PWRB] [ 0.814205] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 [ 0.814209] ACPI: Sleep Button [SLPB] [ 0.814263] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3 [ 0.815067] ACPI: Lid Switch [LID] [ 0.815407] ACPI: processor limited to max C-state 1 [ 0.815442] processor LNXCPU:00: registered as cooling_device0 [ 0.815485] processor LNXCPU:01: registered as cooling_device1 [ 0.821048] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.821057] ACPI: Thermal Zone [THRM] (33 C) [ 0.821133] isapnp: Scanning for PnP cards... [ 1.101277] ACPI: Battery Slot [BAT0] (battery present) [ 1.174099] isapnp: No Plug & Play device found [ 1.175639] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.177195] brd: module loaded [ 1.177791] loop: module loaded [ 1.177895] input: Macintosh mouse button emulation as /devices/virtual/input/input4 [ 1.178190] sata_nv 0000:00:0e.0: version 3.5 [ 1.178203] sata_nv 0000:00:0e.0: enabling device (0005 -> 0007) [ 1.178576] ACPI: PCI Interrupt Link [LTID] enabled at IRQ 23 [ 1.178582] alloc irq_desc for 23 on node -1 [ 1.178584] alloc kstat_irqs on node -1 [ 1.178597] sata_nv 0000:00:0e.0: PCI INT A -> Link[LTID] -> GSI 23 (level, high) -> IRQ 23 [ 1.178601] sata_nv 0000:00:0e.0: Using SWNCQ mode [ 1.178659] sata_nv 0000:00:0e.0: setting latency timer to 64 [ 1.178849] scsi0 : sata_nv [ 1.178981] scsi1 : sata_nv [ 1.179164] ata1: SATA max UDMA/133 cmd 0x30c0 ctl 0x30b4 bmdma 0x3090 irq 23 [ 1.179169] ata2: SATA max UDMA/133 cmd 0x30b8 ctl 0x30b0 bmdma 0x3098 irq 23 [ 1.179298] pata_amd 0000:00:0d.0: version 0.4.1 [ 1.179345] pata_amd 0000:00:0d.0: setting latency timer to 64 [ 1.179438] scsi2 : pata_amd [ 1.179520] scsi3 : pata_amd [ 1.180239] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3080 irq 14 [ 1.180243] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3088 irq 15 [ 1.181256] Fixed MDIO Bus: probed [ 1.181299] PPP generic driver version 2.4.2 [ 1.181422] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.181784] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 22 [ 1.181789] alloc irq_desc for 22 on node -1 [ 1.181792] alloc kstat_irqs on node -1 [ 1.181804] ehci_hcd 0000:00:0b.1: PCI INT B -> Link[LUS2] -> GSI 22 (level, high) -> IRQ 22 [ 1.181823] ehci_hcd 0000:00:0b.1: setting latency timer to 64 [ 1.181827] ehci_hcd 0000:00:0b.1: EHCI Host Controller [ 1.181900] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1 [ 1.181936] ehci_hcd 0000:00:0b.1: debug port 1 [ 1.181942] ehci_hcd 0000:00:0b.1: cache line size of 64 is not supported [ 1.181967] ehci_hcd 0000:00:0b.1: irq 22, io mem 0xb0005000 [ 1.192054] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00 [ 1.192156] usb usb1: configuration #1 chosen from 1 choice [ 1.192195] hub 1-0:1.0: USB hub found [ 1.192205] hub 1-0:1.0: 8 ports detected [ 1.192288] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.192660] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 22 [ 1.192666] ohci_hcd 0000:00:0b.0: PCI INT A -> Link[LUS0] -> GSI 22 (level, high) -> IRQ 22 [ 1.192681] ohci_hcd 0000:00:0b.0: setting latency timer to 64 [ 1.192685] ohci_hcd 0000:00:0b.0: OHCI Host Controller [ 1.192727] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2 [ 1.192747] ohci_hcd 0000:00:0b.0: irq 22, io mem 0xb0004000 [ 1.250133] usb usb2: configuration #1 chosen from 1 choice [ 1.250167] hub 2-0:1.0: USB hub found [ 1.250179] hub 2-0:1.0: 8 ports detected [ 1.250268] uhci_hcd: USB Universal Host Controller Interface driver [ 1.250373] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 [ 1.268261] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.268270] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.268352] mice: PS/2 mouse device common for all mice [ 1.268520] rtc_cmos 00:09: RTC can wake from S4 [ 1.268563] rtc_cmos 00:09: rtc core: registered rtc_cmos as rtc0 [ 1.268602] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs [ 1.268748] device-mapper: uevent: version 1.0.3 [ 1.268878] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 1.268951] device-mapper: multipath: version 1.1.0 loaded [ 1.268954] device-mapper: multipath round-robin: version 1.0.0 loaded [ 1.269142] EISA: Probing bus 0 at eisa.0 [ 1.269149] Cannot allocate resource for EISA slot 1 [ 1.269152] Cannot allocate resource for EISA slot 2 [ 1.269155] Cannot allocate resource for EISA slot 3 [ 1.269158] Cannot allocate resource for EISA slot 4 [ 1.269173] EISA: Detected 0 cards. [ 1.269253] cpuidle: using governor ladder [ 1.269256] cpuidle: using governor menu [ 1.269877] TCP cubic registered [ 1.270089] NET: Registered protocol family 10 [ 1.270629] lo: Disabled Privacy Extensions [ 1.271019] NET: Registered protocol family 17 [ 1.271043] Bluetooth: L2CAP ver 2.13 [ 1.271045] Bluetooth: L2CAP socket layer initialized [ 1.271048] Bluetooth: SCO (Voice Link) ver 0.6 [ 1.271051] Bluetooth: SCO socket layer initialized [ 1.271098] Bluetooth: RFCOMM TTY layer initialized [ 1.271101] Bluetooth: RFCOMM socket layer initialized [ 1.271104] Bluetooth: RFCOMM ver 1.11 [ 1.271125] powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-50 processors (2 cpu cores) (version 2.20.00) [ 1.271169] powernow-k8: 0 : fid 0x8 (1600 MHz), vid 0x12 [ 1.271172] powernow-k8: 1 : fid 0x0 (800 MHz), vid 0x1e [ 1.271256] Using IPI No-Shortcut mode [ 1.271357] PM: Resume from disk failed. [ 1.271372] registered taskstats version 1 [ 1.271552] Magic number: 1:341:676 [ 1.271668] rtc_cmos 00:09: setting system clock to 2009-11-03 09:39:20 UTC (1257241160) [ 1.271672] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.271674] EDD information not available. [ 1.282629] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 [ 1.332092] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.340531] ata3.00: ATAPI: HL-DT-ST DVDRAM GSA-4084N, KQ09, max MWDMA2 [ 1.340562] ata3: nv_mode_filter: 0x39f&0x739f->0x39f, BIOS=0x0 (0xc600) ACPI=0x39f (120:600:0x12) [ 1.340704] ata1.00: ATA-7: ST9100824AS, 7.24, max UDMA/100 [ 1.340707] ata1.00: 195371568 sectors, multi 16: LBA48 [ 1.356530] ata3.00: configured for MWDMA2 [ 1.356637] ata1.00: configured for UDMA/100 [ 1.356762] scsi 0:0:0:0: Direct-Access ATA ST9100824AS 7.24 PQ: 0 ANSI: 5 [ 1.356937] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.356980] sd 0:0:0:0: [sda] 195371568 512-byte logical blocks: (100 GB/93.1 GiB) [ 1.357032] sd 0:0:0:0: [sda] Write Protect is off [ 1.357036] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.357063] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.357206] sda: [ 1.367924] ata2: SATA link down (SStatus 0 SControl 300) [ 1.371350] scsi 2:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-4084N KQ09 PQ: 0 ANSI: 5 [ 1.371775] sda1 sda2 sda3 [ 1.405639] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.405676] Freeing unused kernel memory: 540k freed [ 1.406184] Write protecting the kernel text: 4568k [ 1.406234] Write protecting the kernel read-only data: 1836k [ 1.564048] usb 1-4: new high speed USB device using ehci_hcd and address 3 [ 1.604026] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 1.604449] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20 [ 1.604457] alloc irq_desc for 20 on node -1 [ 1.604460] alloc kstat_irqs on node -1 [ 1.604473] forcedeth 0000:00:14.0: PCI INT A -> Link[LMAC] -> GSI 20 (level, high) -> IRQ 20 [ 1.604479] forcedeth 0000:00:14.0: setting latency timer to 64 [ 1.604528] nv_probe: set workaround bit for reversed mac addr [ 1.651889] acpi device:24: registered as cooling_device2 [ 1.652055] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:22/input/input6 [ 1.652098] ACPI: Video Device [UVGA] (multi-head: yes rom: no post: no) [ 1.696324] ACPI: PCI Interrupt Link [LK4E] enabled at IRQ 19 [ 1.696332] alloc irq_desc for 19 on node -1 [ 1.696335] alloc kstat_irqs on node -1 [ 1.696348] b43-pci-bridge 0000:03:00.0: PCI INT A -> Link[LK4E] -> GSI 19 (level, high) -> IRQ 19 [ 1.696358] b43-pci-bridge 0000:03:00.0: setting latency timer to 64 [ 1.700688] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 5 [ 1.700704] ohci1394 0000:07:05.0: PCI INT A -> Link[LNK1] -> GSI 5 (level, high) -> IRQ 5 [ 1.710832] usb 1-4: configuration #1 chosen from 1 choice [ 1.755072] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[5] MMIO=[b8000000-b80007ff] Max Packet=[2048] IR/IT contexts=[4/4] [ 1.759211] ssb: Sonics Silicon Backplane found on PCI device 0000:03:00.0 [ 2.013053] usb 2-2: new low speed USB device using ohci_hcd and address 2 [ 2.122272] forcedeth 0000:00:14.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:16:36:a1:45:01 [ 2.122279] forcedeth 0000:00:14.0: highdma pwrctl lnktim desc-v3 [ 2.244197] usb 2-2: configuration #1 chosen from 1 choice [ 2.256842] usbcore: registered new interface driver hiddev [ 2.268465] input: BTC USB Multimedia Cordless Kit as /devices/pci0000:00/0000:00:0b.0/usb2/2-2/2-2:1.0/input/input7 [ 2.268550] generic-usb 0003:046E:5520.0001: input,hidraw0: USB HID v1.10 Keyboard [BTC USB Multimedia Cordless Kit] on usb-0000:00:0b.0-2/input0 [ 2.280431] input: BTC USB Multimedia Cordless Kit as /devices/pci0000:00/0000:00:0b.0/usb2/2-2/2-2:1.1/input/input8 [ 2.280527] generic-usb 0003:046E:5520.0002: input,hidraw1: USB HID v1.10 Mouse [BTC USB Multimedia Cordless Kit] on usb-0000:00:0b.0-2/input1 [ 2.315209] input: BTC USB Multimedia Cordless Kit as /devices/pci0000:00/0000:00:0b.0/usb2/2-2/2-2:1.2/input/input9 [ 2.315287] generic-usb 0003:046E:5520.0003: input,hidraw2: USB HID v1.10 Device [BTC USB Multimedia Cordless Kit] on usb-0000:00:0b.0-2/input2 [ 2.315310] usbcore: registered new interface driver usbhid [ 2.315315] usbhid: v2.6:USB HID core driver [ 3.036454] ieee1394: Host added: ID:BUS[0-00:1023] GUID[009fc000d8a3c300] [ 3.257809] EXT4-fs (loop0): barriers enabled [ 3.275957] kjournald2 starting: pid 421, dev loop0:8, commit interval 5 seconds [ 3.275981] EXT4-fs (loop0): delayed allocation enabled [ 3.275988] EXT4-fs: file extents enabled [ 3.276641] EXT4-fs: mballoc enabled [ 3.276664] EXT4-fs (loop0): mounted filesystem with ordered data mode [ 4.536333] type=1505 audit(1257241163.764:2): operation="profile_load" pid=445 name=/usr/share/gdm/guest-session/Xsession [ 4.539102] type=1505 audit(1257241163.764:3): operation="profile_load" pid=446 name=/sbin/dhclient3 [ 4.539473] type=1505 audit(1257241163.764:4): operation="profile_load" pid=446 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 4.539687] type=1505 audit(1257241163.764:5): operation="profile_load" pid=446 name=/usr/lib/connman/scripts/dhclient-script [ 4.620386] type=1505 audit(1257241163.845:6): operation="profile_load" pid=447 name=/usr/bin/evince [ 4.626299] type=1505 audit(1257241163.853:7): operation="profile_load" pid=447 name=/usr/bin/evince-previewer [ 4.629994] type=1505 audit(1257241163.857:8): operation="profile_load" pid=447 name=/usr/bin/evince-thumbnailer [ 4.660407] type=1505 audit(1257241163.885:9): operation="profile_load" pid=449 name=/usr/lib/cups/backend/cups-pdf [ 6.498001] udev: starting version 147 [ 7.501223] lp: driver loaded but no devices found [ 7.547725] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 [ 7.558744] Linux agpgart interface v0.103 [ 7.565308] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x3040 [ 7.565334] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x3000 [ 7.745562] nvidia: module license 'NVIDIA' taints kernel. [ 7.745568] Disabling lock debugging due to kernel taint [ 7.777079] sdhci: Secure Digital Host Controller Interface driver [ 7.777084] sdhci: Copyright(c) Pierre Ossman [ 7.778798] sdhci-pci 0000:07:05.1: SDHCI controller found [1180:0822] (rev 19) [ 7.779174] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 7 [ 7.779190] sdhci-pci 0000:07:05.1: PCI INT B -> Link[LNK2] -> GSI 7 (level, high) -> IRQ 7 [ 7.781261] Registered led device: mmc0:: [ 7.782298] mmc0: SDHCI controller on PCI [0000:07:05.1] using PIO [ 7.783096] ricoh-mmc: Ricoh MMC Controller disabling driver [ 7.783100] ricoh-mmc: Copyright(c) Philip Langdale [ 7.783137] ricoh-mmc: Ricoh MMC controller found at 0000:07:05.2 [1180:0843] (rev 1) [ 7.783154] ricoh-mmc: Controller is now disabled. [ 8.002440] nvidia 0000:00:05.0: power state changed by ACPI to D0 [ 8.002832] ACPI: PCI Interrupt Link [LK3E] enabled at IRQ 18 [ 8.002838] alloc irq_desc for 18 on node -1 [ 8.002841] alloc kstat_irqs on node -1 [ 8.002854] nvidia 0000:00:05.0: PCI INT A -> Link[LK3E] -> GSI 18 (level, high) -> IRQ 18 [ 8.002862] nvidia 0000:00:05.0: setting latency timer to 64 [ 8.003195] NVRM: loading NVIDIA UNIX x86 Kernel Module 185.18.36 Fri Aug 14 17:18:04 PDT 2009 [ 8.072105] cfg80211: Calling CRDA to update world regulatory domain [ 8.552295] Linux video capture interface: v2.00 [ 8.821678] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04713/0x200000 [ 8.862713] b43-phy0: Broadcom 4311 WLAN found (core revision 10) [ 8.866052] ip_tables: (C) 2000-2006 Netfilter Core Team [ 8.884582] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input10 [ 9.000700] cfg80211: World regulatory domain updated: [ 9.000706] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 9.000711] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 9.000715] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 9.000719] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 9.000722] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 9.000726] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 9.099644] phy0: Selected rate control algorithm 'minstrel' [ 9.100574] Broadcom 43xx driver loaded [ Features: PL, Firmware-ID: FW13 ] [ 9.258200] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21 [ 9.258208] alloc irq_desc for 21 on node -1 [ 9.258211] alloc kstat_irqs on node -1 [ 9.258224] HDA Intel 0000:00:10.1: PCI INT B -> Link[LAZA] -> GSI 21 (level, high) -> IRQ 21 [ 9.258270] HDA Intel 0000:00:10.1: setting latency timer to 64 [ 9.311306] usbcam: registering driver r5u870 0.11.3 [ 9.311341] r5u870: Found DMI model: "HP Pavilion dv6000 (RG265UA#ABA) " [ 9.311345] r5u870-0: Detected HP Pavilion Webcam (WDM) [ 9.312609] usb 1-4: firmware: requesting r5u870_1870.fw [ 10.168587] r5u870-0: registered as video0 [ 10.168621] usbcore: registered new interface driver r5u870 [ 28.894965] Adding 262136k swap on /host/ubuntu/disks/swap.disk. Priority:-1 extents:1 across:262136k [ 29.031876] EXT4-fs (loop0): internal journal on loop0:8 [ 30.756807] __ratelimit: 6 callbacks suppressed [ 30.756812] type=1505 audit(1257259189.984:12): operation="profile_replace" pid=977 name=/usr/share/gdm/guest-session/Xsession [ 30.759060] type=1505 audit(1257259189.984:13): operation="profile_replace" pid=978 name=/sbin/dhclient3 [ 30.759431] type=1505 audit(1257259189.984:14): operation="profile_replace" pid=978 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 30.759640] type=1505 audit(1257259189.984:15): operation="profile_replace" pid=978 name=/usr/lib/connman/scripts/dhclient-script [ 30.765459] type=1505 audit(1257259189.992:16): operation="profile_replace" pid=979 name=/usr/bin/evince [ 30.771692] type=1505 audit(1257259189.996:17): operation="profile_replace" pid=979 name=/usr/bin/evince-previewer [ 30.775282] type=1505 audit(1257259190.000:18): operation="profile_replace" pid=979 name=/usr/bin/evince-thumbnailer [ 30.783447] type=1505 audit(1257259190.008:19): operation="profile_replace" pid=981 name=/usr/lib/cups/backend/cups-pdf [ 30.783907] type=1505 audit(1257259190.008:20): operation="profile_replace" pid=981 name=/usr/sbin/cupsd [ 30.786530] type=1505 audit(1257259190.012:21): operation="profile_replace" pid=982 name=/usr/sbin/tcpdump [ 30.960061] b43 ssb0:0: firmware: requesting b43/ucode5.fw [ 30.965631] b43 ssb0:0: firmware: requesting b43/pcm5.fw [ 30.971896] b43 ssb0:0: firmware: requesting b43/b0g0initvals5.fw [ 30.978003] b43 ssb0:0: firmware: requesting b43/b0g0bsinitvals5.fw [ 31.136039] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10) [ 31.212499] Registered led device: b43-phy0::tx [ 31.212526] Registered led device: b43-phy0::rx [ 31.212551] Registered led device: b43-phy0::radio [ 31.249462] ADDRCONF(NETDEV_UP): wlan0: link is not ready