I will try this weekend, thanks in advance.


Aitor Juan Martín García
Consultor SAP
Tlf: 606746626
aitor.martingarcia   # gmail dot com



2009/8/31 chayyoo <email address hidden>

> I solved my problem by adding two lines to /etc/modprobe.d/alsa-
> base.conf:
>
> options snd-hda-intel model=auto
> options snd-hda-intel enable_msi=1
>
> Hope this helps
>
> --
> Broken audio playback with Intel 82801G (Realtek ALC883) on 9.04
> https://bugs.launchpad.net/bugs/336125
> You received this bug notification because you are a direct subscriber
> of the bug.
>
> Status in “alsa-driver” package in Ubuntu: Invalid
> Status in “linux” package in Ubuntu: Incomplete
>
> Bug description:
> This specific problem is occurring on an HP Mini 1030NR and may be related
> to bugs #244754 and #229522 in some way.  Audio playback was fine under the
> original Windows install and a standard install of 8.10 (though in 8.10 the
> volume meter was skewed such that 0% to 80% produced almost no change and
> 80% to 100% was the only useful part of the volume meter).  Audio playback
> under 9.04 does not function at all through the external speaker, except to
> produce a loud hissing sound when the computer is restarted.  When plugging
> headphones into the headphone jack, audio can be heard, except it is
> accompanied by heavy crackling and popping that begins approximately 1-2
> seconds after plugging headphones into the jack.  Additionally, when
> plugging headphones in, crackling and popping can be heard from the external
> speaker briefly.
>
> lspci -vv output:
>
> 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High
> Definition Audio Controller (rev 02)
>        Subsystem: Hewlett-Packard Company Device 361a
>        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
>        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>        Latency: 0, Cache Line Size: 32 bytes
>        Interrupt: pin A routed to IRQ 16
>        Region 0: Memory at fe938000 (64-bit, non-prefetchable) [size=16K]
>        Capabilities: [50] Power Management version 2
>                Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
>                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>        Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+
> Queue=0/0 Enable-
>                Address: 0000000000000000  Data: 0000
>        Capabilities: [70] Express (v1) Root Complex Integrated Endpoint,
> MSI 00
>                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
> <64ns, L1 <1us
>                        ExtTag- RBE- FLReset-
>                DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
> Unsupported-
>                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
>                        MaxPayload 128 bytes, MaxReadReq 128 bytes
>                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+
> TransPend-
>                LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown,
> Latency L0 <64ns, L1 <1us
>                        ClockPM- Suprise- LLActRep- BwNot-
>                LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
>                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>                LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk-
> DLActive- BWMgmt- ABWMgmt-
>        Capabilities: [100] Virtual Channel <?>
>        Capabilities: [130] Root Complex Link <?>
>        Kernel driver in use: HDA Intel
>        Kernel modules: snd-hda-intel
>
> The system and PulseAudio do not appear to print any error messages
> regarding audio (though PulseAudio prints a message stating "warning:
> 'pulseaudio' uses 32-bit capabilities (legacy support in use)").
>
> This system is not used for anything important, so I am happy to test any
> potential solutions for the issue.
>