Additional info about the issue, which is pretty critical since the M2N-SLI mainboard is quite widespread among Linux users and because the issue may actually impact other users. I applied all the commands given in the technote https://wiki.ubuntu.com/DebuggingSoundProblems, except my lspci -vvnn which is already attached to this ticket. The card seems to be correctly detected, but I can't get any sound from it. When using a Gutsy live CD for example, sound works well. julien@pcathlon64:~$ aplay --list-devices **** Liste des PLAYBACK périphériques **** carte 0: NVidia [HDA NVidia], périphérique 0 : AD198x Analog [AD198x Analog] Sous-périphériques: 1/1 Sous-périphérique: #0: subdevice #0 carte 0: NVidia [HDA NVidia], périphérique 1 : AD198x Digital [AD198x Digital] Sous-périphériques: 1/1 Sous-périphérique: #0: subdevice #0 julien@pcathlon64:~$ tail -2 /proc/asound/oss/sndstat Mixers: 0: Analog Devices AD1988B julien@pcathlon64:~$ amixer Simple mixer control 'Master',0 Capabilities: pvolume pvolume-joined pswitch pswitch-joined Playback channels: Mono Limits: Playback 0 - 39 Mono: Playback 33 [85%] [-9.00dB] [on] Simple mixer control 'Headphone',0 Capabilities: pswitch Playback channels: Front Left - Front Right Mono: Front Left: Playback [on] Front Right: Playback [on] Simple mixer control 'PCM',0 Capabilities: pvolume Playback channels: Front Left - Front Right Limits: Playback 0 - 255 Mono: Front Left: Playback 111 [44%] [-28.80dB] Front Right: Playback 111 [44%] [-28.80dB] Simple mixer control 'Front',0 Capabilities: pvolume pswitch Playback channels: Front Left - Front Right Limits: Playback 0 - 39 Mono: Front Left: Playback 0 [0%] [-58.50dB] [off] Front Right: Playback 0 [0%] [-58.50dB] [off] Simple mixer control 'Front Mic',0 Capabilities: pvolume pswitch Playback channels: Front Left - Front Right Limits: Playback 0 - 31 Mono: Front Left: Playback 0 [0%] [-34.50dB] [on] Front Right: Playback 0 [0%] [-34.50dB] [on] Simple mixer control 'Front Mic Boost',0 Capabilities: volume Playback channels: Front Left - Front Right Capture channels: Front Left - Front Right Limits: 0 - 3 Front Left: 3 [100%] Front Right: 3 [100%] Simple mixer control 'Surround',0 Capabilities: pvolume pswitch Playback channels: Front Left - Front Right Limits: Playback 0 - 39 Mono: Front Left: Playback 0 [0%] [-58.50dB] [on] Front Right: Playback 0 [0%] [-58.50dB] [on] Simple mixer control 'Center',0 Capabilities: pvolume pvolume-joined pswitch pswitch-joined Playback channels: Mono Limits: Playback 0 - 39 Mono: Playback 0 [0%] [-58.50dB] [off] Simple mixer control 'LFE',0 Capabilities: pvolume pvolume-joined pswitch pswitch-joined Playback channels: Mono Limits: Playback 0 - 39 Mono: Playback 0 [0%] [-58.50dB] [off] Simple mixer control 'Side',0 Capabilities: pvolume pswitch Playback channels: Front Left - Front Right Limits: Playback 0 - 39 Mono: Front Left: Playback 0 [0%] [-58.50dB] [off] Front Right: Playback 0 [0%] [-58.50dB] [off] Simple mixer control 'Line',0 Capabilities: pvolume pswitch Playback channels: Front Left - Front Right Limits: Playback 0 - 31 Mono: Front Left: Playback 25 [81%] [3.00dB] [on] Front Right: Playback 25 [81%] [3.00dB] [on] Simple mixer control 'CD',0 Capabilities: pvolume pswitch Playback channels: Front Left - Front Right Limits: Playback 0 - 31 Mono: Front Left: Playback 0 [0%] [-34.50dB] [off] Front Right: Playback 0 [0%] [-34.50dB] [off] Simple mixer control 'Mic',0 Capabilities: pvolume pswitch Playback channels: Front Left - Front Right Limits: Playback 0 - 31 Mono: Front Left: Playback 0 [0%] [-34.50dB] [on] Front Right: Playback 0 [0%] [-34.50dB] [on] Simple mixer control 'Mic Boost',0 Capabilities: volume Playback channels: Front Left - Front Right Capture channels: Front Left - Front Right Limits: 0 - 3 Front Left: 0 [0%] Front Right: 0 [0%] Simple mixer control 'IEC958',0 Capabilities: pvolume cvolume pswitch pswitch-joined cswitch cswitch-joined Playback channels: Front Left - Front Right Capture channels: Front Left - Front Right Limits: Playback 0 - 39 Capture 0 - 31 Front Left: Playback 0 [0%] [-58.50dB] [on] Capture 0 [0%] [-34.50dB] [on] Front Right: Playback 0 [0%] [-58.50dB] [on] Capture 0 [0%] [-34.50dB] [on] Simple mixer control 'IEC958 Playback Source',0 Capabilities: enum Items: 'PCM' 'ADC1' 'ADC2' 'ADC3' Item0: 'PCM' Simple mixer control 'Mono',0 Capabilities: pswitch Playback channels: Front Left - Front Right Mono: Front Left: Playback [on] Front Right: Playback [on] Simple mixer control 'Capture',0 Capabilities: cvolume cswitch Capture channels: Front Left - Front Right Limits: Capture 0 - 54 Front Left: Capture 39 [72%] [0.00dB] [off] Front Right: Capture 39 [72%] [0.00dB] [off] Simple mixer control 'Capture',1 Capabilities: cvolume cswitch Capture channels: Front Left - Front Right Limits: Capture 0 - 54 Front Left: Capture 39 [72%] [0.00dB] [off] Front Right: Capture 39 [72%] [0.00dB] [off] Simple mixer control 'Capture',2 Capabilities: cvolume cswitch Capture channels: Front Left - Front Right Limits: Capture 0 - 54 Front Left: Capture 39 [72%] [0.00dB] [off] Front Right: Capture 39 [72%] [0.00dB] [off] Simple mixer control 'Analog Mix',0 Capabilities: pvolume pswitch Playback channels: Front Left - Front Right Limits: Playback 0 - 31 Mono: Front Left: Playback 0 [0%] [-46.50dB] [on] Front Right: Playback 0 [0%] [-46.50dB] [on] Simple mixer control 'Beep',0 Capabilities: pvolume pswitch Playback channels: Front Left - Front Right Limits: Playback 0 - 15 Mono: Front Left: Playback 0 [0%] [-45.00dB] [on] Front Right: Playback 0 [0%] [-45.00dB] [on] Simple mixer control 'Digital',0 Capabilities: cvolume Capture channels: Front Left - Front Right Limits: Capture 0 - 120 Front Left: Capture 0 [0%] [-30.00dB] Front Right: Capture 0 [0%] [-30.00dB] Simple mixer control 'Input Source',0 Capabilities: cenum Items: 'Front Mic' 'Line' 'Mic' 'CD' 'Mix' Item0: 'Front Mic' Simple mixer control 'Input Source',1 Capabilities: cenum Items: 'Front Mic' 'Line' 'Mic' 'CD' 'Mix' Item0: 'Front Mic' Simple mixer control 'Input Source',2 Capabilities: cenum Items: 'Front Mic' 'Line' 'Mic' 'CD' 'Mix' Item0: 'Front Mic' julien@pcathlon64:~$ asoundconf list Names of available sound cards: NVidia julien@pcathlon64:~$ dmesg [ 0.000000] Linux version 2.6.24-16-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Thu Apr 10 13:23:42 UTC 2008 (Ubuntu 2.6.24-16.30-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007fee0000 (usable) [ 0.000000] BIOS-e820: 000000007fee0000 - 000000007fee3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007fee3000 - 000000007fef0000 (ACPI data) [ 0.000000] BIOS-e820: 000000007fef0000 - 000000007ff00000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] 1150MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at 000f5b90 [ 0.000000] Entering add_active_range(0, 0, 524000) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 524000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 524000 [ 0.000000] On node 0 totalpages: 524000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2301 pages used for memmap [ 0.000000] HighMem zone: 292323 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI 2.4 present. [ 0.000000] ACPI: RSDP signature @ 0xC00F7C40 checksum 0 [ 0.000000] ACPI: RSDP 000F7C40, 0024 (r2 Nvidia) [ 0.000000] ACPI: XSDT 7FEE30C0, 004C (r1 Nvidia ASUSACPI 42302E31 AWRD 0) [ 0.000000] ACPI: FACP 7FEEC540, 00F4 (r3 Nvidia ASUSACPI 42302E31 AWRD 0) [ 0.000000] ACPI: DSDT 7FEE3240, 92AC (r1 NVIDIA AWRDACPI 1000 MSFT 3000000) [ 0.000000] ACPI: FACS 7FEE0000, 0040 [ 0.000000] ACPI: SSDT 7FEEC740, 01C4 (r1 PTLTD POWERNOW 1 LTP 1) [ 0.000000] ACPI: HPET 7FEEC980, 0038 (r1 Nvidia ASUSACPI 42302E31 AWRD 98) [ 0.000000] ACPI: MCFG 7FEECA00, 003C (r1 Nvidia ASUSACPI 42302E31 AWRD 0) [ 0.000000] ACPI: APIC 7FEEC680, 007C (r1 Nvidia ASUSACPI 42302E31 AWRD 0) [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 15:11 APIC version 16 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 15:11 APIC version 16 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfefff000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 7ff00000:70100000) [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519907 [ 0.000000] Kernel command line: root=UUID=53dfbfeb-5955-48e2-9039-e6c3b9b219d0 ro quiet splash [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 2009.259 MHz processor. [ 19.377584] spurious 8259A interrupt: IRQ7. [ 19.378861] Console: colour VGA+ 80x25 [ 19.378864] console [tty0] enabled [ 19.379140] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 19.379618] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 19.460235] Memory: 2065720k/2096000k available (2157k kernel code, 29044k reserved, 998k data, 364k init, 1178496k highmem) [ 19.460243] virtual kernel memory layout: [ 19.460244] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB) [ 19.460245] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 19.460246] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 19.460247] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 19.460248] .init : 0xc041b000 - 0xc0476000 ( 364 kB) [ 19.460249] .data : 0xc031b5a4 - 0xc0414dc4 ( 998 kB) [ 19.460250] .text : 0xc0100000 - 0xc031b5a4 (2157 kB) [ 19.460253] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 19.460284] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 19.460416] hpet clockevent registered [ 19.540318] Calibrating delay using timer specific routine.. 4021.66 BogoMIPS (lpj=8043321) [ 19.540336] Security Framework initialized [ 19.540341] SELinux: Disabled at boot. [ 19.540354] AppArmor: AppArmor initialized [ 19.540358] Failure registering capabilities with primary security module. [ 19.540365] Mount-cache hash table entries: 512 [ 19.540463] CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f 00000000 [ 19.540471] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 19.540473] CPU: L2 Cache: 256K (64 bytes/line) [ 19.540475] CPU 0(2) -> Core 0 [ 19.540477] CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001f 00000000 [ 19.540486] Compat vDSO mapped to ffffe000. [ 19.540495] Checking 'hlt' instruction... OK. [ 19.556528] SMP alternatives: switching to UP code [ 19.557584] Early unpacking initramfs... done [ 19.873054] ACPI: Core revision 20070126 [ 19.873125] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 19.877960] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3600+ stepping 02 [ 19.877975] SMP alternatives: switching to SMP code [ 19.878378] Booting processor 1/1 eip 3000 [ 19.887545] Initializing CPU#1 [ 19.966988] Calibrating delay using timer specific routine.. 4018.54 BogoMIPS (lpj=8037091) [ 19.966994] CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f 00000000 [ 19.967000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 19.967002] CPU: L2 Cache: 256K (64 bytes/line) [ 19.967004] CPU 1(2) -> Core 1 [ 19.967006] CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001f 00000000 [ 19.967951] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 3600+ stepping 02 [ 19.967966] Total of 2 processors activated (8040.20 BogoMIPS). [ 19.968199] ENABLING IO-APIC IRQs [ 19.968412] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 20.115688] Brought up 2 CPUs [ 20.115732] CPU0 attaching sched-domain: [ 20.115734] domain 0: span 03 [ 20.115736] groups: 01 02 [ 20.115738] CPU1 attaching sched-domain: [ 20.115740] domain 0: span 03 [ 20.115742] groups: 02 01 [ 20.115916] net_namespace: 64 bytes [ 20.115922] Booting paravirtualized kernel on bare hardware [ 20.116359] Time: 18:44:45 Date: 04/12/08 [ 20.116381] NET: Registered protocol family 16 [ 20.116536] EISA bus registered [ 20.116539] ACPI: bus type pci registered [ 20.147312] PCI: PCI BIOS revision 3.00 entry at 0xf2360, last bus=7 [ 20.147314] PCI: Using configuration type 1 [ 20.147316] Setting up standard PCI resources [ 20.151687] ACPI: EC: Look up EC in DSDT [ 20.160103] ACPI: Interpreter enabled [ 20.160106] ACPI: (supports S0 S1 S3 S4 S5) [ 20.160119] ACPI: Using IOAPIC for interrupt routing [ 20.172011] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 20.172651] PCI: Transparent bridge - 0000:00:06.0 [ 20.173106] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 20.173466] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 20.243822] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 20.244044] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 20.244263] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 20.244480] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 20.244697] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 20.244917] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 *10 11 14 15) [ 20.245137] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 *11 14 15) [ 20.245355] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 20.245572] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 20.245790] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 20.246009] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 *10 11 14 15) [ 20.246228] ACPI: PCI Interrupt Link [LMC1] (IRQs 5 7 9 *10 11 14 15) [ 20.246446] ACPI: PCI Interrupt Link [LAZA] (IRQs *5 7 9 10 11 14 15) [ 20.246663] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 20.246881] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 20.247099] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 20.247318] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 20.247549] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 *10 11 14 15) [ 20.247769] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 *11 14 15) [ 20.247988] ACPI: PCI Interrupt Link [LSA2] (IRQs *5 7 9 10 11 14 15) [ 20.248240] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. [ 20.248483] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. [ 20.248724] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. [ 20.248965] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. [ 20.249206] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled. [ 20.249447] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0 [ 20.249688] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0 [ 20.249929] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled. [ 20.250171] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled. [ 20.250413] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0 [ 20.250655] ACPI: PCI Interrupt Link [AMC1] (IRQs 20 21 22 23) *0 [ 20.250897] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled. [ 20.251139] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0 [ 20.251382] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled. [ 20.251630] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled. [ 20.251873] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled. [ 20.252116] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. [ 20.252360] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 [ 20.252602] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0 [ 20.252845] ACPI: PCI Interrupt Link [ASA2] (IRQs 20 21 22 23) *0 [ 20.253009] Linux Plug and Play Support v0.97 (c) Adam Belay [ 20.253035] pnp: PnP ACPI init [ 20.253043] ACPI: bus type pnp registered [ 20.259461] pnpacpi: exceeded the max number of mem resources: 12 [ 20.259533] pnp: PnP ACPI: found 15 devices [ 20.259535] ACPI: ACPI bus type pnp unregistered [ 20.259538] PnPBIOS: Disabled by ACPI PNP [ 20.259714] PCI: Using ACPI for IRQ routing [ 20.259718] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 20.367278] NET: Registered protocol family 8 [ 20.367280] NET: Registered protocol family 20 [ 20.367309] hpet0: at MMIO 0xfefff000, IRQs 2, 8, 31 [ 20.367313] hpet0: 3 32-bit timers, 25000000 Hz [ 20.368348] AppArmor: AppArmor Filesystem Enabled [ 20.371268] Time: hpet clocksource has been installed. [ 20.371280] Switched to high resolution mode on CPU 0 [ 20.370575] Switched to high resolution mode on CPU 1 [ 20.379247] system 00:01: ioport range 0x1000-0x107f has been reserved [ 20.379250] system 00:01: ioport range 0x1080-0x10ff has been reserved [ 20.379253] system 00:01: ioport range 0x1400-0x147f has been reserved [ 20.379255] system 00:01: ioport range 0x1480-0x14ff has been reserved [ 20.379258] system 00:01: ioport range 0x1800-0x187f has been reserved [ 20.379260] system 00:01: ioport range 0x1880-0x18ff has been reserved [ 20.379266] system 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 20.379269] system 00:02: ioport range 0x800-0x87f has been reserved [ 20.379272] system 00:02: ioport range 0x290-0x297 has been reserved [ 20.379283] system 00:0d: iomem range 0xf0000000-0xf3ffffff could not be reserved [ 20.379289] system 00:0e: iomem range 0xd2800-0xd3fff has been reserved [ 20.379292] system 00:0e: iomem range 0xf0000-0xf7fff could not be reserved [ 20.379295] system 00:0e: iomem range 0xf8000-0xfbfff could not be reserved [ 20.379297] system 00:0e: iomem range 0xfc000-0xfffff could not be reserved [ 20.379300] system 00:0e: iomem range 0xfefff000-0xfefff0ff could not be reserved [ 20.379303] system 00:0e: iomem range 0x7fee0000-0x7fefffff could not be reserved [ 20.379305] system 00:0e: iomem range 0xffff0000-0xffffffff could not be reserved [ 20.379308] system 00:0e: iomem range 0x0-0x9ffff could not be reserved [ 20.379311] system 00:0e: iomem range 0x100000-0x7fedffff could not be reserved [ 20.379313] system 00:0e: iomem range 0xfec00000-0xfec00fff could not be reserved [ 20.379316] system 00:0e: iomem range 0xfee00000-0xfeefffff could not be reserved [ 20.379319] system 00:0e: iomem range 0xfefff000-0xfeffffff could not be reserved [ 20.409643] PCI: Bridge: 0000:00:06.0 [ 20.409645] IO window: disabled. [ 20.409648] MEM window: fde00000-fdefffff [ 20.409650] PREFETCH window: disabled. [ 20.409652] PCI: Bridge: 0000:00:0a.0 [ 20.409653] IO window: disabled. [ 20.409655] MEM window: disabled. [ 20.409657] PREFETCH window: disabled. [ 20.409660] PCI: Bridge: 0000:00:0b.0 [ 20.409661] IO window: disabled. [ 20.409663] MEM window: disabled. [ 20.409665] PREFETCH window: disabled. [ 20.409667] PCI: Bridge: 0000:00:0c.0 [ 20.409668] IO window: disabled. [ 20.409670] MEM window: disabled. [ 20.409672] PREFETCH window: disabled. [ 20.409674] PCI: Bridge: 0000:00:0d.0 [ 20.409675] IO window: disabled. [ 20.409677] MEM window: disabled. [ 20.409679] PREFETCH window: disabled. [ 20.409681] PCI: Bridge: 0000:00:0e.0 [ 20.409683] IO window: 8000-9fff [ 20.409686] MEM window: fdd00000-fddfffff [ 20.409687] PREFETCH window: disabled. [ 20.409690] PCI: Bridge: 0000:00:0f.0 [ 20.409692] IO window: 7000-7fff [ 20.409694] MEM window: fa000000-fcffffff [ 20.409696] PREFETCH window: e0000000-efffffff [ 20.409704] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 20.409715] PCI: Setting latency timer of device 0000:00:0a.0 to 64 [ 20.409722] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 20.409728] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 20.409735] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 20.409741] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 20.409747] PCI: Setting latency timer of device 0000:00:0f.0 to 64 [ 20.409759] NET: Registered protocol family 2 [ 20.447192] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 20.447439] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 20.448096] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 20.448417] TCP: Hash tables configured (established 131072 bind 65536) [ 20.448420] TCP reno registered [ 20.459234] checking if image is initramfs... it is [ 21.070220] Freeing initrd memory: 7695k freed [ 21.070106] audit: initializing netlink socket (disabled) [ 21.070118] audit(1208025885.504:1): initialized [ 21.070274] highmem bounce pool size: 64 pages [ 21.071916] VFS: Disk quotas dquot_6.5.1 [ 21.071978] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 21.072086] io scheduler noop registered [ 21.072088] io scheduler anticipatory registered [ 21.072090] io scheduler deadline registered [ 21.072098] io scheduler cfq registered (default) [ 21.086526] Boot video device is 0000:07:00.0 [ 21.086628] PCI: Setting latency timer of device 0000:00:0a.0 to 64 [ 21.086648] assign_interrupt_mode Found MSI capability [ 21.086666] Allocate Port Service[0000:00:0a.0:pcie00] [ 21.086722] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 21.086742] assign_interrupt_mode Found MSI capability [ 21.086755] Allocate Port Service[0000:00:0b.0:pcie00] [ 21.086807] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 21.086826] assign_interrupt_mode Found MSI capability [ 21.086839] Allocate Port Service[0000:00:0c.0:pcie00] [ 21.086892] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 21.086911] assign_interrupt_mode Found MSI capability [ 21.086925] Allocate Port Service[0000:00:0d.0:pcie00] [ 21.086976] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 21.086996] assign_interrupt_mode Found MSI capability [ 21.087009] Allocate Port Service[0000:00:0e.0:pcie00] [ 21.087060] PCI: Setting latency timer of device 0000:00:0f.0 to 64 [ 21.087080] assign_interrupt_mode Found MSI capability [ 21.087093] Allocate Port Service[0000:00:0f.0:pcie00] [ 21.087296] isapnp: Scanning for PnP cards... [ 21.439269] isapnp: No Plug & Play device found [ 21.463944] Real Time Clock Driver v1.12ac [ 21.464138] hpet_resources: 0xfefff000 is busy [ 21.464175] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 21.464290] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 21.464840] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 21.465559] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 21.465620] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 21.465706] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 21.466045] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 21.466050] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 21.486041] mice: PS/2 mouse device common for all mice [ 21.486151] EISA: Probing bus 0 at eisa.0 [ 21.486156] Cannot allocate resource for EISA slot 1 [ 21.486169] Cannot allocate resource for EISA slot 7 [ 21.486171] Cannot allocate resource for EISA slot 8 [ 21.486172] EISA: Detected 0 cards. [ 21.486175] cpuidle: using governor ladder [ 21.486176] cpuidle: using governor menu [ 21.486252] NET: Registered protocol family 1 [ 21.486275] Using IPI No-Shortcut mode [ 21.486303] registered taskstats version 1 [ 21.486431] Magic number: 4:482:746 [ 21.486562] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 21.486564] EDD information not available. [ 21.486751] Freeing unused kernel memory: 364k freed [ 21.505963] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 22.738992] fuse init (API version 7.9) [ 22.757634] ACPI: Fan [FAN] (on) [ 22.764376] ACPI: Thermal Zone [THRM] (40 C) [ 23.275169] usbcore: registered new interface driver usbfs [ 23.275189] usbcore: registered new interface driver hub [ 23.276018] usbcore: registered new device driver usb [ 23.287467] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 23.287890] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23 [ 23.287899] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 23 (level, low) -> IRQ 16 [ 23.287910] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 23.287913] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 23.288130] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 [ 23.288146] ohci_hcd 0000:00:02.0: irq 16, io mem 0xfe02f000 [ 23.307062] SCSI subsystem initialized [ 23.335368] libata version 3.00 loaded. [ 23.345434] usb usb1: configuration #1 chosen from 1 choice [ 23.345457] hub 1-0:1.0: USB hub found [ 23.345464] hub 1-0:1.0: 10 ports detected [ 23.446903] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22 [ 23.446914] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 22 (level, low) -> IRQ 17 [ 23.446925] PCI: Setting latency timer of device 0000:00:02.1 to 64 [ 23.446928] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 23.446961] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2 [ 23.446984] ehci_hcd 0000:00:02.1: debug port 1 [ 23.446987] PCI: cache line size of 64 is not supported by device 0000:00:02.1 [ 23.446997] ehci_hcd 0000:00:02.1: irq 17, io mem 0xfe02e000 [ 23.459410] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 23.459512] usb usb2: configuration #1 chosen from 1 choice [ 23.459533] hub 2-0:1.0: USB hub found [ 23.459539] hub 2-0:1.0: 10 ports detected [ 23.523026] Floppy drive(s): fd0 is 1.44M [ 23.543128] FDC 0 is a post-1991 82077 [ 23.564165] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61. [ 23.564577] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 21 [ 23.564585] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APCH] -> GSI 21 (level, low) -> IRQ 18 [ 23.564591] PCI: Setting latency timer of device 0000:00:08.0 to 64 [ 24.082786] forcedeth 0000:00:08.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:1b:fc:a4:07:0c [ 24.082791] forcedeth 0000:00:08.0: highdma csum vlan pwrctl mgmt timirq gbit lnktim msi desc-v3 [ 24.083207] ACPI: PCI Interrupt Link [AMC1] enabled at IRQ 20 [ 24.083216] ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [AMC1] -> GSI 20 (level, low) -> IRQ 19 [ 24.083221] PCI: Setting latency timer of device 0000:00:09.0 to 64 [ 24.602126] forcedeth 0000:00:09.0: ifname eth1, PHY OUI 0x5043 @ 1, addr 00:1b:fc:a4:25:de [ 24.602131] forcedeth 0000:00:09.0: highdma csum vlan pwrctl mgmt timirq gbit lnktim msi desc-v3 [ 24.601472] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 24.601894] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23 [ 24.601897] ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [APSI] -> GSI 23 (level, low) -> IRQ 16 [ 24.601916] PCI: Setting latency timer of device 0000:00:05.0 to 64 [ 24.601922] ACPI: PCI interrupt for device 0000:00:05.0 disabled [ 24.602275] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22 [ 24.602277] ACPI: PCI Interrupt 0000:00:05.1[B] -> Link [APSJ] -> GSI 22 (level, low) -> IRQ 17 [ 24.602295] PCI: Setting latency timer of device 0000:00:05.1 to 64 [ 24.602301] ACPI: PCI interrupt for device 0000:00:05.1 disabled [ 24.602649] ACPI: PCI Interrupt Link [ASA2] enabled at IRQ 21 [ 24.602651] ACPI: PCI Interrupt 0000:00:05.2[C] -> Link [ASA2] -> GSI 21 (level, low) -> IRQ 18 [ 24.602668] PCI: Setting latency timer of device 0000:00:05.2 to 64 [ 24.602674] ACPI: PCI interrupt for device 0000:00:05.2 disabled [ 24.602730] PCI: Enabling device 0000:06:00.1 (0000 -> 0001) [ 24.603069] ACPI: PCI Interrupt Link [APC8] enabled at IRQ 16 [ 24.603077] ACPI: PCI Interrupt 0000:06:00.1[B] -> Link [APC8] -> GSI 16 (level, low) -> IRQ 20 [ 24.603099] PCI: Setting latency timer of device 0000:06:00.1 to 64 [ 24.603110] ACPI: PCI interrupt for device 0000:06:00.1 disabled [ 24.604780] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 [ 24.604791] ACPI: PCI Interrupt 0000:01:0b.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 21 [ 24.654488] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21] MMIO=[fdeff000-fdeff7ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 24.654880] ahci 0000:06:00.0: version 3.0 [ 24.655289] ACPI: PCI Interrupt Link [APC7] enabled at IRQ 16 [ 24.655292] ACPI: PCI Interrupt 0000:06:00.0[A] -> Link [APC7] -> GSI 16 (level, low) -> IRQ 20 [ 25.656492] ahci 0000:06:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 25.656497] ahci 0000:06:00.0: flags: 64bit ncq pm led clo pmp pio slum part [ 25.656503] PCI: Setting latency timer of device 0000:06:00.0 to 64 [ 25.656678] scsi0 : ahci [ 25.656918] scsi1 : ahci [ 25.656950] ata1: SATA max UDMA/133 abar m8192@0xfddfe000 port 0xfddfe100 irq 20 [ 25.656954] ata2: SATA max UDMA/133 abar m8192@0xfddfe000 port 0xfddfe180 irq 20 [ 25.923234] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d80001565427] [ 25.979870] ata1: SATA link down (SStatus 0 SControl 300) [ 26.299448] ata2: SATA link down (SStatus 0 SControl 300) [ 26.299965] ACPI: PCI Interrupt 0000:06:00.1[B] -> Link [APC8] -> GSI 16 (level, low) -> IRQ 20 [ 26.300004] PCI: Setting latency timer of device 0000:06:00.1 to 64 [ 26.300468] scsi2 : pata_jmicron [ 26.300641] scsi3 : pata_jmicron [ 26.300667] ata3: PATA max UDMA/100 cmd 0x9c00 ctl 0x9800 bmdma 0x8c00 irq 20 [ 26.300670] ata4: PATA max UDMA/100 cmd 0x9400 ctl 0x9000 bmdma 0x8c08 irq 20 [ 26.627115] sata_nv 0000:00:05.0: version 3.5 [ 26.627128] ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [APSI] -> GSI 23 (level, low) -> IRQ 16 [ 26.627163] PCI: Setting latency timer of device 0000:00:05.0 to 64 [ 26.631887] scsi4 : sata_nv [ 26.632299] scsi5 : sata_nv [ 26.632483] ata5: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xdc00 irq 16 [ 26.632486] ata6: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xdc08 irq 16 [ 27.098395] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 27.150062] ata5.00: ATA-7: ST3200820AS, 3.AAE, max UDMA/133 [ 27.150066] ata5.00: 390721968 sectors, multi 1: LBA48 NCQ (depth 0/32) [ 27.224938] ata5.00: configured for UDMA/133 [ 27.689617] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 27.738845] ata6.00: ATA-7: ST3320620AS, 3.AAK, max UDMA/133 [ 27.738849] ata6.00: 625142448 sectors, multi 1: LBA48 NCQ (depth 0/32) [ 27.805403] ata6.00: configured for UDMA/133 [ 27.806311] scsi 4:0:0:0: Direct-Access ATA ST3200820AS 3.AA PQ: 0 ANSI: 5 [ 27.806670] scsi 5:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5 [ 27.806732] ACPI: PCI Interrupt 0000:00:05.1[B] -> Link [APSJ] -> GSI 22 (level, low) -> IRQ 17 [ 27.806768] PCI: Setting latency timer of device 0000:00:05.1 to 64 [ 27.807039] scsi6 : sata_nv [ 27.807181] scsi7 : sata_nv [ 27.807357] ata7: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc800 irq 17 [ 27.807360] ata8: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc808 irq 17 [ 28.272851] ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 28.436726] ata7.00: ATAPI: ASUS DVD-E616A3T, 1.01, max UDMA/100 [ 28.436730] ata7.00: applying bridge limits [ 28.608504] ata7.00: configured for UDMA/100 [ 29.075794] ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 29.239670] ata8.00: ATAPI: ASUS DRW-1814BLT, 1.04, max UDMA/66 [ 29.411448] ata8.00: configured for UDMA/66 [ 29.426934] scsi 6:0:0:0: CD-ROM ASUS DVD-E616A3T 1.01 PQ: 0 ANSI: 5 [ 29.427452] scsi 7:0:0:0: CD-ROM ASUS DRW-1814BLT 1.04 PQ: 0 ANSI: 5 [ 29.427512] ACPI: PCI Interrupt 0000:00:05.2[C] -> Link [ASA2] -> GSI 21 (level, low) -> IRQ 18 [ 29.427548] PCI: Setting latency timer of device 0000:00:05.2 to 64 [ 29.427700] scsi8 : sata_nv [ 29.427833] scsi9 : sata_nv [ 29.428012] ata9: SATA max UDMA/133 cmd 0xc400 ctl 0xc000 bmdma 0xb400 irq 18 [ 29.428014] ata10: SATA max UDMA/133 cmd 0xbc00 ctl 0xb800 bmdma 0xb408 irq 18 [ 29.738914] ata9: SATA link down (SStatus 0 SControl 300) [ 30.058489] ata10: SATA link down (SStatus 0 SControl 300) [ 30.068015] pata_amd 0000:00:04.0: version 0.3.10 [ 30.068054] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 30.068875] scsi10 : pata_amd [ 30.069772] scsi11 : pata_amd [ 30.070272] ata11: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 30.070274] ata12: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 30.084066] Driver 'sd' needs updating - please use bus_type methods [ 30.085390] sd 4:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB) [ 30.085402] sd 4:0:0:0: [sda] Write Protect is off [ 30.085405] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 30.085419] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 30.085470] sd 4:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB) [ 30.085478] sd 4:0:0:0: [sda] Write Protect is off [ 30.085480] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 30.085492] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 30.085495] sda:<4>Driver 'sr' needs updating - please use bus_type methods [ 30.101540] sda1 sda2 sda3 [ 30.101617] sd 4:0:0:0: [sda] Attached SCSI disk [ 30.101671] sd 5:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB) [ 30.101680] sd 5:0:0:0: [sdb] Write Protect is off [ 30.101682] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 30.101696] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 30.101730] sd 5:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB) [ 30.101737] sd 5:0:0:0: [sdb] Write Protect is off [ 30.101739] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 30.101752] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 30.101755] sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 sdb8 sdb9 sdb10 sdb11 sdb12 > [ 30.208795] sd 5:0:0:0: [sdb] Attached SCSI disk [ 30.214919] sd 4:0:0:0: Attached scsi generic sg0 type 0 [ 30.214937] sd 5:0:0:0: Attached scsi generic sg1 type 0 [ 30.214953] sr 6:0:0:0: Attached scsi generic sg2 type 5 [ 30.214967] scsi 7:0:0:0: Attached scsi generic sg3 type 5 [ 30.238083] ata12: port disabled. ignoring. [ 30.302252] sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray [ 30.302256] Uniform CD-ROM driver Revision: 3.20 [ 30.302306] sr 6:0:0:0: Attached scsi CD-ROM sr0 [ 30.306182] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 30.306214] sr 7:0:0:0: Attached scsi CD-ROM sr1 [ 30.674750] Attempting manual resume [ 30.674753] swsusp: Resume From Partition 8:28 [ 30.674755] PM: Checking swsusp image. [ 30.674101] PM: Resume from disk failed. [ 30.711106] kjournald starting. Commit interval 5 seconds [ 30.710305] EXT3-fs: mounted filesystem with ordered data mode. [ 35.248018] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 35.350005] logips2pp: Detected unknown logitech mouse model 89 [ 35.379771] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 35.400685] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 35.503139] input: Power Button (FF) as /devices/virtual/input/input3 [ 35.567451] ACPI: Power Button (FF) [PWRF] [ 35.567503] input: Power Button (CM) as /devices/virtual/input/input4 [ 35.631426] ACPI: Power Button (CM) [PWRB] [ 35.826691] input: ImExPS/2 Logitech Explorer Mouse as /devices/platform/i8042/serio1/input/input5 [ 35.866181] parport_pc 00:0a: reported by Plug and Play ACPI [ 35.866206] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] [ 36.074903] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00 [ 36.074920] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x1c40 [ 36.782344] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 20 [ 36.782349] ACPI: PCI Interrupt 0000:00:06.1[B] -> Link [AAZA] -> GSI 20 (level, low) -> IRQ 19 [ 36.782373] PCI: Setting latency timer of device 0000:00:06.1 to 64 [ 37.069273] Linux agpgart interface v0.102 [ 37.152199] nvidia: module license 'NVIDIA' taints kernel. [ 37.412799] ACPI: PCI Interrupt Link [APC6] enabled at IRQ 16 [ 37.412804] ACPI: PCI Interrupt 0000:07:00.0[A] -> Link [APC6] -> GSI 16 (level, low) -> IRQ 20 [ 37.412811] PCI: Setting latency timer of device 0000:07:00.0 to 64 [ 37.413033] NVRM: loading NVIDIA UNIX x86 Kernel Module 169.12 Thu Feb 14 17:53:07 PST 2008 [ 38.529862] lp0: using parport0 (interrupt-driven). [ 38.662666] Adding 5164856k swap on /dev/sdb12. Priority:-1 extents:1 across:5164856k [ 39.304712] EXT3 FS on sdb5, internal journal [ 39.441322] device-mapper: uevent: version 1.0.3 [ 39.441350] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: