[ 0.000000] Linux version 5.4.0-100-generic (buildd@lcy02-amd64-009) (gcc version 7.5.0 (Ubuntu 7.5.0-3ubuntu1~18.04)) #113~18.04.1-Ubuntu SMP Mon Feb 7 15:02:28 UTC 2022 (Ubuntu 5.4.0-100.113~18.04.1-generic 5.4.166) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Hygon HygonGenuine [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] zhaoxin Shanghai [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000077b6bfff] usable [ 0.000000] BIOS-e820: [mem 0x0000000077b6c000-0x0000000077bbefff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000077bbf000-0x0000000077c7ffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000077c80000-0x0000000077cbefff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000077cbf000-0x0000000077cebfff] usable [ 0.000000] BIOS-e820: [mem 0x0000000077cec000-0x0000000077cfefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x0000000077cff000-0x0000000077cfffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000077d00000-0x000000007fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: TOSHIBA Satellite C650/Portable PC, BIOS 1.20 04/27/2010 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 1994.977 MHz processor [ 0.005718] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.005721] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.005732] last_pfn = 0x77d00 max_arch_pfn = 0x1000000 [ 0.005743] MTRR default type: uncachable [ 0.005744] MTRR fixed ranges enabled: [ 0.005746] 00000-9FFFF write-back [ 0.005748] A0000-BFFFF uncachable [ 0.005749] C0000-FFFFF write-through [ 0.005750] MTRR variable ranges enabled: [ 0.005752] 0 base 000000000 mask FC0000000 write-back [ 0.005754] 1 base 0FFF00000 mask FFFF00000 write-protect [ 0.005755] 2 base 040000000 mask FC0000000 write-back [ 0.005757] 3 base 078000000 mask FF8000000 uncachable [ 0.005758] 4 base 077E00000 mask FFFE00000 uncachable [ 0.005760] 5 base 077D00000 mask FFFF00000 uncachable [ 0.005761] 6 disabled [ 0.005762] 7 disabled [ 0.006382] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.017887] check: Scanning 1 areas for low memory corruption [ 0.017889] initial memory mapped: [mem 0x00000000-0x079fffff] [ 0.017996] RAMDISK: [mem 0x30a89000-0x3453bfff] [ 0.018006] ACPI: Early table checksum verification disabled [ 0.018012] ACPI: RSDP 0x00000000000FE020 000024 (v02 TOSINV) [ 0.018016] ACPI: XSDT 0x0000000077CFE120 000064 (v01 TOSINV TOSINV00 00000001 01000013) [ 0.018024] ACPI: FACP 0x0000000077CFD000 0000F4 (v04 TOSINV TOSINV00 00000001 MSFT 01000013) [ 0.018032] ACPI: DSDT 0x0000000077CEF000 0094DE (v01 TOSINV TOSINV00 00000001 MSFT 01000013) [ 0.018037] ACPI: FACS 0x0000000077C93000 000040 [ 0.018041] ACPI: FACS 0x0000000077C93000 000040 [ 0.018045] ACPI: HPET 0x0000000077CFC000 000038 (v01 TOSINV TOSINV00 00000001 MSFT 01000013) [ 0.018050] ACPI: APIC 0x0000000077CFB000 00006C (v02 TOSINV TOSINV00 00000001 MSFT 01000013) [ 0.018055] ACPI: MCFG 0x0000000077CFA000 00003C (v01 TOSINV TOSINV00 00000001 MSFT 01000013) [ 0.018060] ACPI: ASF! 0x0000000077CF9000 0000A5 (v32 TOSINV TOSINV00 00000001 MSFT 01000013) [ 0.018065] ACPI: SLIC 0x0000000077CEE000 000176 (v01 TOSINV TOSINV00 00000001 MSFT 01000013) [ 0.018070] ACPI: BOOT 0x0000000077CED000 000028 (v01 TOSINV TOSINV00 00000001 MSFT 01000013) [ 0.018075] ACPI: SSDT 0x0000000077CEC000 000655 (v01 PmRef CpuPm 00003000 INTL 20051117) [ 0.018080] ACPI: Reserving FACP table memory at [mem 0x77cfd000-0x77cfd0f3] [ 0.018081] ACPI: Reserving DSDT table memory at [mem 0x77cef000-0x77cf84dd] [ 0.018083] ACPI: Reserving FACS table memory at [mem 0x77c93000-0x77c9303f] [ 0.018084] ACPI: Reserving FACS table memory at [mem 0x77c93000-0x77c9303f] [ 0.018085] ACPI: Reserving HPET table memory at [mem 0x77cfc000-0x77cfc037] [ 0.018087] ACPI: Reserving APIC table memory at [mem 0x77cfb000-0x77cfb06b] [ 0.018088] ACPI: Reserving MCFG table memory at [mem 0x77cfa000-0x77cfa03b] [ 0.018089] ACPI: Reserving ASF! table memory at [mem 0x77cf9000-0x77cf90a4] [ 0.018091] ACPI: Reserving SLIC table memory at [mem 0x77cee000-0x77cee175] [ 0.018092] ACPI: Reserving BOOT table memory at [mem 0x77ced000-0x77ced027] [ 0.018094] ACPI: Reserving SSDT table memory at [mem 0x77cec000-0x77cec654] [ 0.018114] ACPI: Local APIC address 0xfee00000 [ 0.018119] 1031MB HIGHMEM available. [ 0.018122] 885MB LOWMEM available. [ 0.018123] mapped low ram: 0 - 375fe000 [ 0.018124] low ram: 0 - 375fe000 [ 0.020338] Zone ranges: [ 0.020340] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.020343] Normal [mem 0x0000000001000000-0x00000000375fdfff] [ 0.020344] HighMem [mem 0x00000000375fe000-0x0000000077cfffff] [ 0.020346] Movable zone start for each node [ 0.020347] Early memory node ranges [ 0.020348] node 0: [mem 0x0000000000001000-0x000000000009dfff] [ 0.020350] node 0: [mem 0x0000000000100000-0x0000000077b6bfff] [ 0.020352] node 0: [mem 0x0000000077bbf000-0x0000000077c7ffff] [ 0.020353] node 0: [mem 0x0000000077cbf000-0x0000000077cebfff] [ 0.020354] node 0: [mem 0x0000000077cff000-0x0000000077cfffff] [ 0.021150] Zeroed struct page in unavailable ranges: 33800 pages [ 0.021154] Initmem setup node 0 [mem 0x0000000000001000-0x0000000077cfffff] [ 0.021157] On node 0 totalpages: 490488 [ 0.021160] DMA zone: 40 pages used for memmap [ 0.021161] DMA zone: 0 pages reserved [ 0.021162] DMA zone: 3997 pages, LIFO batch:0 [ 0.021271] Normal zone: 2175 pages used for memmap [ 0.021273] Normal zone: 222718 pages, LIFO batch:63 [ 0.027025] HighMem zone: 263773 pages, LIFO batch:63 [ 0.033837] Using APIC driver default [ 0.033851] Reserving Intel graphics memory at [mem 0x78000000-0x7fffffff] [ 0.034097] ACPI: PM-Timer IO Port: 0x408 [ 0.034100] ACPI: Local APIC address 0xfee00000 [ 0.034122] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 [ 0.034126] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.034129] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.034130] ACPI: IRQ0 used by override. [ 0.034132] ACPI: IRQ9 used by override. [ 0.034135] Using ACPI (MADT) for SMP configuration information [ 0.034137] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.034150] smpboot: Allowing 4 CPUs, 2 hotplug CPUs [ 0.034185] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.034188] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.034189] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.034190] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.034192] PM: Registered nosave memory: [mem 0x77b6c000-0x77bbefff] [ 0.034195] PM: Registered nosave memory: [mem 0x77c80000-0x77cbefff] [ 0.034197] PM: Registered nosave memory: [mem 0x77cec000-0x77cfefff] [ 0.034200] [mem 0x80000000-0xf7ffffff] available for PCI devices [ 0.034202] Booting paravirtualized kernel on bare hardware [ 0.034208] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.034219] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 [ 0.034601] percpu: Embedded 33 pages/cpu s104780 r0 d30388 u135168 [ 0.034611] pcpu-alloc: s104780 r0 d30388 u135168 alloc=33*4096 [ 0.034612] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.034645] Built 1 zonelists, mobility grouping on. Total pages: 488273 [ 0.034647] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.4.0-100-generic root=UUID=ae2cd7bc-9460-4fd2-b19b-60156b2aa02a ro quiet splash vt.handoff=1 [ 0.035091] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.035201] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.035247] microcode: microcode updated early to revision 0xa0b, date = 2010-09-28 [ 0.035247] Initializing CPU#0 [ 0.035253] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.035261] Initializing HighMem for node 0 (000375fe:00077d00) [ 0.114836] Initializing Movable for node 0 (00000000:00000000) [ 0.120935] Memory: 1858276K/1961952K available (9986K kernel code, 940K rwdata, 8332K rodata, 1176K init, 832K bss, 103676K reserved, 0K cma-reserved, 1055092K highmem) [ 0.120941] virtual kernel memory layout: fixmap : 0xfff16000 - 0xfffff000 ( 932 kB) cpu_entry : 0xffa00000 - 0xffb39000 (1252 kB) pkmap : 0xff600000 - 0xff800000 (2048 kB) vmalloc : 0xf7dfe000 - 0xff5fe000 ( 120 MB) lowmem : 0xc0000000 - 0xf75fe000 ( 885 MB) .init : 0xc72ef000 - 0xc7415000 (1176 kB) .data : 0xc69c0b70 - 0xc72d7100 (9305 kB) .text : 0xc6000000 - 0xc69c0b70 (9986 kB) [ 0.120942] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.120972] random: get_random_u32 called from __kmem_cache_create+0x31/0x470 with crng_init=0 [ 0.121246] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.121265] Kernel/User page tables isolation: enabled [ 0.121282] ftrace: allocating 41721 entries in 82 pages [ 0.151245] rcu: Hierarchical RCU implementation. [ 0.151247] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.151249] Tasks RCU enabled. [ 0.151250] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.151252] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.156071] NR_IRQS: 2304, nr_irqs: 456, preallocated irqs: 16 [ 0.156389] vt handoff: transparent VT on vt#1 [ 0.156402] Console: colour dummy device 80x25 [ 0.156409] printk: console [tty0] enabled [ 0.156427] ACPI: Core revision 20190816 [ 0.156428] TOSHIBA Satellite detected - force copy of DSDT to local memory [ 0.156564] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.156581] APIC: Switch to symmetric I/O mode setup [ 0.156582] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.157022] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.176582] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x398349db02d, max_idle_ns: 881590467921 ns [ 0.176588] Calibrating delay loop (skipped), value calculated using timer frequency.. 3989.95 BogoMIPS (lpj=7979908) [ 0.176591] pid_max: default: 32768 minimum: 301 [ 0.176651] LSM: Security Framework initializing [ 0.176668] Yama: becoming mindful. [ 0.176724] AppArmor: AppArmor initialized [ 0.176783] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.176789] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.176813] *** VALIDATE tmpfs *** [ 0.177089] *** VALIDATE proc *** [ 0.177176] *** VALIDATE cgroup1 *** [ 0.177178] *** VALIDATE cgroup2 *** [ 0.177263] mce: CPU0: Thermal monitoring enabled (TM1) [ 0.177267] process: using mwait in idle threads [ 0.177274] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4 [ 0.177275] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0 [ 0.177279] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.177281] Spectre V2 : Mitigation: Full generic retpoline [ 0.177282] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.177283] Speculative Store Bypass: Vulnerable [ 0.177287] MDS: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.177495] Freeing SMP alternatives memory: 36K [ 0.290050] smpboot: CPU0: Intel Celeron(R) Dual-Core CPU T3300 @ 2.00GHz (family: 0x6, model: 0x17, stepping: 0xa) [ 0.290221] Performance Events: PEBS fmt0+, Core2 events, 4-deep LBR, Intel PMU driver. [ 0.290231] ... version: 2 [ 0.290232] ... bit width: 40 [ 0.290233] ... generic registers: 2 [ 0.290234] ... value mask: 000000ffffffffff [ 0.290235] ... max period: 000000007fffffff [ 0.290236] ... fixed-purpose events: 3 [ 0.290237] ... event mask: 0000000700000003 [ 0.290300] rcu: Hierarchical SRCU implementation. [ 0.292023] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.292104] smp: Bringing up secondary CPUs ... [ 0.292303] x86: Booting SMP configuration: [ 0.292304] .... node #0, CPUs: #1 [ 0.004302] Initializing CPU#1 [ 0.294677] smp: Brought up 1 node, 2 CPUs [ 0.294677] smpboot: Max logical packages: 2 [ 0.294677] smpboot: Total of 2 processors activated (7979.90 BogoMIPS) [ 0.297681] allocated 2097152 bytes of page_ext [ 0.297802] devtmpfs: initialized [ 0.297802] PM: Registering ACPI NVS region [mem 0x77c80000-0x77cbefff] (258048 bytes) [ 0.297802] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.297802] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.297802] pinctrl core: initialized pinctrl subsystem [ 0.297802] PM: RTC time: 08:45:12, date: 2022-02-27 [ 0.297802] NET: Registered protocol family 16 [ 0.297802] audit: initializing netlink subsys (disabled) [ 0.297802] audit: type=2000 audit(1645951512.140:1): state=initialized audit_enabled=0 res=1 [ 0.300740] EISA bus registered [ 0.300755] cpuidle: using governor ladder [ 0.300762] cpuidle: using governor menu [ 0.300899] Simple Boot Flag value 0x5 read from CMOS RAM was invalid [ 0.300901] Simple Boot Flag at 0x44 set to 0x1 [ 0.300921] ACPI: bus type PCI registered [ 0.300923] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.301019] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.301038] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.301039] PCI: Using MMCONFIG for extended config space [ 0.301040] PCI: Using configuration type 1 for base access [ 0.301242] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.301242] mtrr: probably your BIOS does not setup all CPUs. [ 0.301243] mtrr: corrected configuration. [ 0.303985] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.305506] ACPI: Added _OSI(Module Device) [ 0.305506] ACPI: Added _OSI(Processor Device) [ 0.305506] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.305506] ACPI: Added _OSI(Processor Aggregator Device) [ 0.305506] ACPI: Added _OSI(Linux-Dell-Video) [ 0.305506] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.305506] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.305506] ACPI: Forced DSDT copy: length 0x094DE copied locally, original unmapped [ 0.316572] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.318009] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.345185] ACPI: Dynamic OEM Table Load: [ 0.345194] ACPI: SSDT 0x00000000F580C800 000537 (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.346412] ACPI: Dynamic OEM Table Load: [ 0.346417] ACPI: SSDT 0x00000000F5924D80 00008D (v01 PmRef ApCst 00003000 INTL 20051117) [ 0.347506] ACPI: Interpreter enabled [ 0.347550] ACPI: (supports S0 S3 S4 S5) [ 0.347551] ACPI: Using IOAPIC for interrupt routing [ 0.347600] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.347915] ACPI: Enabled 9 GPEs in block 00 to 3F [ 0.362350] ACPI: Power Resource [FN00] (on) [ 0.363757] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.363765] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.363771] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.363776] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge [ 0.364462] PCI host bridge to bus 0000:00 [ 0.364465] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.364468] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.364470] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.364472] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff window] [ 0.364474] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.364490] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000 [ 0.364526] pci 0000:00:00.0: DMAR: Disabling IOMMU for graphics on this chipset [ 0.364528] pci 0000:00:00.0: DMAR: Forcing write-buffer flush capability [ 0.364690] pci 0000:00:02.0: [8086:2a42] type 00 class 0x030000 [ 0.364707] pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x903fffff 64bit] [ 0.364716] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref] [ 0.364722] pci 0000:00:02.0: reg 0x20: [io 0x5110-0x5117] [ 0.364883] pci 0000:00:02.1: [8086:2a43] type 00 class 0x038000 [ 0.364898] pci 0000:00:02.1: reg 0x10: [mem 0x93400000-0x934fffff 64bit] [ 0.365089] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300 [ 0.365174] pci 0000:00:1a.0: reg 0x20: [io 0x50e0-0x50ff] [ 0.365368] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300 [ 0.365460] pci 0000:00:1a.1: reg 0x20: [io 0x50c0-0x50df] [ 0.365682] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320 [ 0.365714] pci 0000:00:1a.7: reg 0x10: [mem 0x96704c00-0x96704fff] [ 0.365840] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.365997] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300 [ 0.366030] pci 0000:00:1b.0: reg 0x10: [mem 0x96700000-0x96703fff 64bit] [ 0.366144] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.366316] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400 [ 0.366448] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.366620] pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400 [ 0.366744] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.366920] pci 0000:00:1c.4: [8086:2948] type 01 class 0x060400 [ 0.367049] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.367221] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 [ 0.367312] pci 0000:00:1d.0: reg 0x20: [io 0x50a0-0x50bf] [ 0.367540] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 [ 0.367632] pci 0000:00:1d.1: reg 0x20: [io 0x5080-0x509f] [ 0.367858] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 [ 0.367943] pci 0000:00:1d.2: reg 0x20: [io 0x5060-0x507f] [ 0.368148] pci 0000:00:1d.3: [8086:2939] type 00 class 0x0c0300 [ 0.368237] pci 0000:00:1d.3: reg 0x20: [io 0x5040-0x505f] [ 0.368455] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 [ 0.368487] pci 0000:00:1d.7: reg 0x10: [mem 0x96704800-0x96704bff] [ 0.368617] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.368776] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401 [ 0.369006] pci 0000:00:1f.0: [8086:2919] type 00 class 0x060100 [ 0.369280] pci 0000:00:1f.2: [8086:2929] type 00 class 0x010601 [ 0.369309] pci 0000:00:1f.2: reg 0x10: [io 0x5108-0x510f] [ 0.369320] pci 0000:00:1f.2: reg 0x14: [io 0x511c-0x511f] [ 0.369332] pci 0000:00:1f.2: reg 0x18: [io 0x5100-0x5107] [ 0.369343] pci 0000:00:1f.2: reg 0x1c: [io 0x5118-0x511b] [ 0.369354] pci 0000:00:1f.2: reg 0x20: [io 0x5020-0x503f] [ 0.369365] pci 0000:00:1f.2: reg 0x24: [mem 0x96704000-0x967047ff] [ 0.369425] pci 0000:00:1f.2: PME# supported from D3hot [ 0.369575] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 [ 0.369601] pci 0000:00:1f.3: reg 0x10: [mem 0x96705000-0x967050ff 64bit] [ 0.369630] pci 0000:00:1f.3: reg 0x20: [io 0x5000-0x501f] [ 0.369853] pci 0000:02:00.0: [1969:2060] type 00 class 0x020000 [ 0.369901] pci 0000:02:00.0: reg 0x10: [mem 0x95600000-0x9563ffff 64bit] [ 0.369916] pci 0000:02:00.0: reg 0x18: [io 0x3000-0x307f] [ 0.370072] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.370264] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.370269] pci 0000:00:1c.0: bridge window [io 0x3000-0x4fff] [ 0.370274] pci 0000:00:1c.0: bridge window [mem 0x95600000-0x966fffff] [ 0.370282] pci 0000:00:1c.0: bridge window [mem 0x90400000-0x913fffff 64bit pref] [ 0.370382] pci 0000:03:00.0: [168c:002b] type 00 class 0x028000 [ 0.370432] pci 0000:03:00.0: reg 0x10: [mem 0x94500000-0x9450ffff 64bit] [ 0.370616] pci 0000:03:00.0: supports D1 [ 0.370618] pci 0000:03:00.0: PME# supported from D0 D1 D3hot [ 0.370815] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.370820] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff] [ 0.370825] pci 0000:00:1c.1: bridge window [mem 0x94500000-0x955fffff] [ 0.370831] pci 0000:00:1c.1: bridge window [mem 0x91400000-0x923fffff 64bit pref] [ 0.370941] acpiphp: Slot [1] registered [ 0.370948] pci 0000:00:1c.4: PCI bridge to [bus 07-08] [ 0.370953] pci 0000:00:1c.4: bridge window [io 0x1000-0x1fff] [ 0.370958] pci 0000:00:1c.4: bridge window [mem 0x93500000-0x944fffff] [ 0.370965] pci 0000:00:1c.4: bridge window [mem 0x92400000-0x933fffff 64bit pref] [ 0.370989] pci_bus 0000:04: extended config space not accessible [ 0.371066] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode) [ 0.371080] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.371082] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.371084] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.371086] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfebfffff window] (subtractive decode) [ 0.371117] pci_bus 0000:00: on NUMA node 0 [ 0.371295] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 10 11 12) [ 0.371391] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12) [ 0.371485] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12) [ 0.371578] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12) [ 0.371670] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. [ 0.371764] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12) [ 0.371857] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12) [ 0.371951] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12) [ 0.372678] iommu: Default domain type: Translated [ 0.372970] SCSI subsystem initialized [ 0.372984] libata version 3.00 loaded. [ 0.372984] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.372984] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.372984] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.372984] vgaarb: loaded [ 0.372984] ACPI: bus type USB registered [ 0.372984] usbcore: registered new interface driver usbfs [ 0.372984] usbcore: registered new interface driver hub [ 0.372984] usbcore: registered new device driver usb [ 0.372984] pps_core: LinuxPPS API ver. 1 registered [ 0.372984] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.372984] PTP clock support registered [ 0.372984] EDAC MC: Ver: 3.0.0 [ 0.372984] PCI: Using ACPI for IRQ routing [ 0.374791] PCI: pci_cache_line_size set to 64 bytes [ 0.374868] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] [ 0.374870] e820: reserve RAM buffer [mem 0x77b6c000-0x77ffffff] [ 0.374872] e820: reserve RAM buffer [mem 0x77c80000-0x77ffffff] [ 0.374874] e820: reserve RAM buffer [mem 0x77cec000-0x77ffffff] [ 0.374875] e820: reserve RAM buffer [mem 0x77d00000-0x77ffffff] [ 0.375074] NetLabel: Initializing [ 0.375076] NetLabel: domain hash size = 128 [ 0.375077] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.375100] NetLabel: unlabeled traffic allowed by default [ 0.375131] hpet: 4 channels of 0 reserved for per-cpu timers [ 0.375131] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.375131] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.376610] clocksource: Switched to clocksource tsc-early [ 0.404229] *** VALIDATE bpf *** [ 0.404331] VFS: Disk quotas dquot_6.6.0 [ 0.404361] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.404397] *** VALIDATE ramfs *** [ 0.404402] *** VALIDATE hugetlbfs *** [ 0.404572] AppArmor: AppArmor Filesystem Enabled [ 0.404624] pnp: PnP ACPI init [ 0.405068] pnp 00:00: disabling [io 0x164e-0x164f] because it overlaps 0000:00:1c.4 BAR 13 [io 0x1000-0x1fff] [ 0.405145] system 00:00: [io 0x0800-0x080f] has been reserved [ 0.405148] system 00:00: [io 0x0810-0x0817] has been reserved [ 0.405150] system 00:00: [io 0x0820-0x0823] has been reserved [ 0.405152] system 00:00: [io 0x0400-0x047f] has been reserved [ 0.405155] system 00:00: [io 0x0500-0x057f] has been reserved [ 0.405159] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.405161] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.405164] system 00:00: [mem 0xfed10000-0xfed13fff] has been reserved [ 0.405167] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.405169] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.405172] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.405174] system 00:00: [mem 0xfed20000-0xfed8ffff] has been reserved [ 0.405177] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.405180] system 00:00: [mem 0xff800000-0xffffffff] could not be reserved [ 0.405188] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.405252] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.405343] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.405391] pnp 00:03: Plug and Play ACPI device, IDs TOS0100 SYN1900 SYN0002 PNP0f13 (active) [ 0.405552] pnp: PnP ACPI: found 4 devices [ 0.405555] PnPBIOS: Disabled by ACPI PNP [ 0.408311] thermal_sys: Registered thermal governor 'fair_share' [ 0.408312] thermal_sys: Registered thermal governor 'bang_bang' [ 0.408314] thermal_sys: Registered thermal governor 'step_wise' [ 0.408315] thermal_sys: Registered thermal governor 'user_space' [ 0.408316] thermal_sys: Registered thermal governor 'power_allocator' [ 0.442842] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.442919] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.442924] pci 0000:00:1c.0: bridge window [io 0x3000-0x4fff] [ 0.442931] pci 0000:00:1c.0: bridge window [mem 0x95600000-0x966fffff] [ 0.442937] pci 0000:00:1c.0: bridge window [mem 0x90400000-0x913fffff 64bit pref] [ 0.442945] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.442948] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff] [ 0.442954] pci 0000:00:1c.1: bridge window [mem 0x94500000-0x955fffff] [ 0.442959] pci 0000:00:1c.1: bridge window [mem 0x91400000-0x923fffff 64bit pref] [ 0.442967] pci 0000:00:1c.4: PCI bridge to [bus 07-08] [ 0.442970] pci 0000:00:1c.4: bridge window [io 0x1000-0x1fff] [ 0.442976] pci 0000:00:1c.4: bridge window [mem 0x93500000-0x944fffff] [ 0.442980] pci 0000:00:1c.4: bridge window [mem 0x92400000-0x933fffff 64bit pref] [ 0.442987] pci 0000:00:1e.0: PCI bridge to [bus 04] [ 0.443003] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.443005] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.443007] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.443009] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff window] [ 0.443012] pci_bus 0000:02: resource 0 [io 0x3000-0x4fff] [ 0.443014] pci_bus 0000:02: resource 1 [mem 0x95600000-0x966fffff] [ 0.443016] pci_bus 0000:02: resource 2 [mem 0x90400000-0x913fffff 64bit pref] [ 0.443018] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff] [ 0.443020] pci_bus 0000:03: resource 1 [mem 0x94500000-0x955fffff] [ 0.443022] pci_bus 0000:03: resource 2 [mem 0x91400000-0x923fffff 64bit pref] [ 0.443024] pci_bus 0000:07: resource 0 [io 0x1000-0x1fff] [ 0.443026] pci_bus 0000:07: resource 1 [mem 0x93500000-0x944fffff] [ 0.443028] pci_bus 0000:07: resource 2 [mem 0x92400000-0x933fffff 64bit pref] [ 0.443030] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7 window] [ 0.443032] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff window] [ 0.443034] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.443036] pci_bus 0000:04: resource 7 [mem 0x80000000-0xfebfffff window] [ 0.443202] NET: Registered protocol family 2 [ 0.443291] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.443661] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 0.443679] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 0.443722] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.443741] TCP: Hash tables configured (established 8192 bind 8192) [ 0.443804] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.443818] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.443874] NET: Registered protocol family 1 [ 0.443883] NET: Registered protocol family 44 [ 0.443900] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 2.444599] pci 0000:00:1a.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001 [ 2.444942] pci 0000:00:1a.7: quirk_usb_early_handoff+0x0/0x6a0 took 1953155 usecs [ 4.444597] pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001 [ 4.444935] pci 0000:00:1d.7: quirk_usb_early_handoff+0x0/0x6a0 took 1951310 usecs [ 4.444956] pci 0000:02:00.0: [Firmware Bug]: disabling VPD access (can't determine size of non-standard VPD format) [ 4.444965] PCI: CLS 64 bytes, default 64 [ 4.445042] Trying to unpack rootfs image as initramfs... [ 5.863021] Freeing initrd memory: 60108K [ 5.863366] check: Scanning for low memory corruption every 60 seconds [ 5.864024] Initialise system trusted keyrings [ 5.864042] Key type blacklist registered [ 5.864111] workingset: timestamp_bits=14 max_order=19 bucket_order=5 [ 5.866766] zbud: loaded [ 5.867262] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 5.867598] fuse: init (API version 7.31) [ 5.867640] *** VALIDATE fuse *** [ 5.867643] *** VALIDATE fuse *** [ 5.867826] Platform Keyring initialized [ 5.875491] Key type asymmetric registered [ 5.875493] Asymmetric key parser 'x509' registered [ 5.875615] bounce: pool size: 64 pages [ 5.875638] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) [ 5.875697] io scheduler mq-deadline registered [ 5.876654] pcieport 0000:00:1c.4: enabling device (0000 -> 0003) [ 5.876967] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 5.877071] vesafb: mode is 1024x768x32, linelength=4096, pages=0 [ 5.877072] vesafb: scrolling: redraw [ 5.877074] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 5.877098] vesafb: framebuffer at 0x80000000, mapped to 0x(ptrval), using 3072k, total 3072k [ 5.877179] fbcon: Deferring console take-over [ 5.877181] fb0: VESA VGA frame buffer device [ 5.877206] intel_idle: does not run on family 6 model 23 [ 5.877451] ACPI: AC Adapter [ADP0] (on-line) [ 5.877543] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 5.877576] ACPI: Power Button [PWRB] [ 5.877636] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 [ 5.877697] ACPI: Lid Switch [LID0] [ 5.877777] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 5.877821] ACPI: Power Button [PWRF] [ 5.878064] Monitor-Mwait will be used to enter C-1 state [ 5.878070] Monitor-Mwait will be used to enter C-2 state [ 5.878073] tsc: Marking TSC unstable due to TSC halts in idle [ 5.878154] clocksource: Switched to clocksource hpet [ 5.879023] thermal LNXTHERM:00: registered as thermal_zone0 [ 5.879025] ACPI: Thermal Zone [THRM] (60 C) [ 5.879260] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 5.880099] battery: ACPI: Battery Slot [BAT0] (battery present) [ 5.880214] isapnp: Scanning for PnP cards... [ 5.882500] Linux agpgart interface v0.103 [ 6.190760] isapnp: No Plug & Play device found [ 6.296674] loop: module loaded [ 6.297096] libphy: Fixed MDIO Bus: probed [ 6.297097] tun: Universal TUN/TAP device driver, 1.6 [ 6.297174] PPP generic driver version 2.4.2 [ 6.297278] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 6.297283] ehci-pci: EHCI PCI platform driver [ 6.297638] ehci-pci 0000:00:1a.7: EHCI Host Controller [ 6.297646] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 6.297662] ehci-pci 0000:00:1a.7: debug port 1 [ 6.301567] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported [ 6.301586] ehci-pci 0000:00:1a.7: irq 19, io mem 0x96704c00 [ 6.316622] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 6.316708] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 6.316710] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.316712] usb usb1: Product: EHCI Host Controller [ 6.316714] usb usb1: Manufacturer: Linux 5.4.0-100-generic ehci_hcd [ 6.316716] usb usb1: SerialNumber: 0000:00:1a.7 [ 6.316911] hub 1-0:1.0: USB hub found [ 6.316925] hub 1-0:1.0: 4 ports detected [ 6.317460] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 6.317468] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 6.317481] ehci-pci 0000:00:1d.7: debug port 1 [ 6.321404] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported [ 6.321421] ehci-pci 0000:00:1d.7: irq 23, io mem 0x96704800 [ 6.336623] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 6.336689] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 6.336691] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.336693] usb usb2: Product: EHCI Host Controller [ 6.336695] usb usb2: Manufacturer: Linux 5.4.0-100-generic ehci_hcd [ 6.336697] usb usb2: SerialNumber: 0000:00:1d.7 [ 6.336873] hub 2-0:1.0: USB hub found [ 6.336882] hub 2-0:1.0: 8 ports detected [ 6.337315] ehci-platform: EHCI generic platform driver [ 6.337340] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 6.337345] ohci-pci: OHCI PCI platform driver [ 6.337362] ohci-platform: OHCI generic platform driver [ 6.337373] uhci_hcd: USB Universal Host Controller Interface driver [ 6.337661] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 6.337674] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 6.337683] uhci_hcd 0000:00:1a.0: detected 2 ports [ 6.337728] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000050e0 [ 6.337809] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04 [ 6.337811] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.337813] usb usb3: Product: UHCI Host Controller [ 6.337815] usb usb3: Manufacturer: Linux 5.4.0-100-generic uhci_hcd [ 6.337817] usb usb3: SerialNumber: 0000:00:1a.0 [ 6.337996] hub 3-0:1.0: USB hub found [ 6.338006] hub 3-0:1.0: 2 ports detected [ 6.338452] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 6.338459] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 6.338467] uhci_hcd 0000:00:1a.1: detected 2 ports [ 6.338511] uhci_hcd 0000:00:1a.1: irq 21, io base 0x000050c0 [ 6.338589] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04 [ 6.338592] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.338594] usb usb4: Product: UHCI Host Controller [ 6.338595] usb usb4: Manufacturer: Linux 5.4.0-100-generic uhci_hcd [ 6.338597] usb usb4: SerialNumber: 0000:00:1a.1 [ 6.338772] hub 4-0:1.0: USB hub found [ 6.338786] hub 4-0:1.0: 2 ports detected [ 6.339220] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 6.339228] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 6.339236] uhci_hcd 0000:00:1d.0: detected 2 ports [ 6.339258] uhci_hcd 0000:00:1d.0: irq 23, io base 0x000050a0 [ 6.339341] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04 [ 6.339343] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.339345] usb usb5: Product: UHCI Host Controller [ 6.339347] usb usb5: Manufacturer: Linux 5.4.0-100-generic uhci_hcd [ 6.339349] usb usb5: SerialNumber: 0000:00:1d.0 [ 6.339526] hub 5-0:1.0: USB hub found [ 6.339535] hub 5-0:1.0: 2 ports detected [ 6.339989] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 6.339997] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 6.340005] uhci_hcd 0000:00:1d.1: detected 2 ports [ 6.340031] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00005080 [ 6.340106] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04 [ 6.340109] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.340110] usb usb6: Product: UHCI Host Controller [ 6.340112] usb usb6: Manufacturer: Linux 5.4.0-100-generic uhci_hcd [ 6.340114] usb usb6: SerialNumber: 0000:00:1d.1 [ 6.340284] hub 6-0:1.0: USB hub found [ 6.340297] hub 6-0:1.0: 2 ports detected [ 6.340764] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 6.340771] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 6.340780] uhci_hcd 0000:00:1d.2: detected 2 ports [ 6.340817] uhci_hcd 0000:00:1d.2: irq 16, io base 0x00005060 [ 6.340899] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04 [ 6.340901] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.340903] usb usb7: Product: UHCI Host Controller [ 6.340905] usb usb7: Manufacturer: Linux 5.4.0-100-generic uhci_hcd [ 6.340906] usb usb7: SerialNumber: 0000:00:1d.2 [ 6.341083] hub 7-0:1.0: USB hub found [ 6.341093] hub 7-0:1.0: 2 ports detected [ 6.341555] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 6.341562] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8 [ 6.341571] uhci_hcd 0000:00:1d.3: detected 2 ports [ 6.341610] uhci_hcd 0000:00:1d.3: irq 18, io base 0x00005040 [ 6.341695] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04 [ 6.341697] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.341699] usb usb8: Product: UHCI Host Controller [ 6.341700] usb usb8: Manufacturer: Linux 5.4.0-100-generic uhci_hcd [ 6.341702] usb usb8: SerialNumber: 0000:00:1d.3 [ 6.341876] hub 8-0:1.0: USB hub found [ 6.341890] hub 8-0:1.0: 2 ports detected [ 6.342163] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12 [ 6.366158] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 6.366165] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 6.366384] mousedev: PS/2 mouse device common for all mice [ 6.367814] rtc_cmos 00:01: RTC can wake from S4 [ 6.368092] rtc_cmos 00:01: registered as rtc0 [ 6.368118] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs [ 6.368128] i2c /dev entries driver [ 6.368201] device-mapper: uevent: version 1.0.3 [ 6.368307] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com [ 6.368340] platform eisa.0: Probing EISA bus 0 [ 6.368342] platform eisa.0: EISA: Cannot allocate resource for mainboard [ 6.368345] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 6.368347] platform eisa.0: Cannot allocate resource for EISA slot 2 [ 6.368348] platform eisa.0: Cannot allocate resource for EISA slot 3 [ 6.368350] platform eisa.0: Cannot allocate resource for EISA slot 4 [ 6.368352] platform eisa.0: Cannot allocate resource for EISA slot 5 [ 6.368354] platform eisa.0: Cannot allocate resource for EISA slot 6 [ 6.368356] platform eisa.0: Cannot allocate resource for EISA slot 7 [ 6.368358] platform eisa.0: Cannot allocate resource for EISA slot 8 [ 6.368360] platform eisa.0: EISA: Detected 0 cards [ 6.368369] cpufreq_nforce2: No nForce2 chipset [ 6.368370] intel_pstate: CPU model not supported [ 6.368413] ledtrig-cpu: registered to indicate activity on CPUs [ 6.368528] drop_monitor: Initializing network drop monitor service [ 6.368865] NET: Registered protocol family 10 [ 6.376191] Segment Routing with IPv6 [ 6.376234] NET: Registered protocol family 17 [ 6.376303] Key type dns_resolver registered [ 6.376726] microcode: sig=0x1067a, pf=0x80, revision=0xa0b [ 6.376800] microcode: Microcode Update Driver: v2.2. [ 6.376806] IPI shorthand broadcast: enabled [ 6.376914] registered taskstats version 1 [ 6.376928] Loading compiled-in X.509 certificates [ 6.381718] Loaded X.509 cert 'Build time autogenerated kernel key: ebd3aea55897cbacd02ebe6f9d8e33358588a2e9' [ 6.386377] Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969' [ 6.390914] Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19' [ 6.390915] blacklist: Loading compiled-in revocation X.509 certificates [ 6.390949] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing: 61482aa2830d0ab2ad5af10b7250da9033ddcef0' [ 6.390989] zswap: loaded using pool lzo/zbud [ 6.391201] Key type ._fscrypt registered [ 6.391203] Key type .fscrypt registered [ 6.398232] Key type big_key registered [ 6.401662] Key type encrypted registered [ 6.401667] AppArmor: AppArmor sha1 policy hashing enabled [ 6.401682] ima: No TPM chip found, activating TPM-bypass! [ 6.401691] ima: Allocated hash algorithm: sha1 [ 6.401700] ima: No architecture policies found [ 6.401713] evm: Initialising EVM extended attributes: [ 6.401714] evm: security.selinux [ 6.401715] evm: security.SMACK64 [ 6.401715] evm: security.SMACK64EXEC [ 6.401716] evm: security.SMACK64TRANSMUTE [ 6.401717] evm: security.SMACK64MMAP [ 6.401717] evm: security.apparmor [ 6.401718] evm: security.ima [ 6.401719] evm: security.capability [ 6.401720] evm: HMAC attrs: 0x1 [ 6.402158] PM: Magic number: 10:88:777 [ 6.402219] misc rfkill: hash matches [ 6.402335] rtc_cmos 00:01: setting system clock to 2022-02-27T08:45:18 UTC (1645951518) [ 6.402549] Unstable clock detected, switching default tracing clock to "global" If you want to keep using the local clock, then add: "trace_clock=local" on the kernel command line [ 6.404421] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 6.406821] Freeing unused kernel image memory: 1176K [ 6.416793] Write protecting kernel text and read-only data: 18352k [ 6.416794] NX-protecting the kernel data: 12540k [ 6.417345] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 6.417420] x86/mm: Checking user space page tables [ 6.417500] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 6.417503] Run /init as init process [ 6.576636] usb 1-2: new high-speed USB device number 2 using ehci-pci [ 6.664106] ahci 0000:00:1f.2: version 3.0 [ 6.664614] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode [ 6.664618] ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pmp pio slum part ccc sxs [ 6.682489] scsi host0: ahci [ 6.691859] scsi host1: ahci [ 6.705039] scsi host2: ahci [ 6.705615] atl1c 0000:02:00.0: version 1.0.1.1-NAPI [ 6.713055] scsi host3: ahci [ 6.745086] atl1c 0000:02:00.0 enp2s0: renamed from eth0 [ 6.746930] scsi host4: ahci [ 6.747389] scsi host5: ahci [ 6.747512] ata1: SATA max UDMA/133 abar m2048@0x96704000 port 0x96704100 irq 24 [ 6.747515] ata2: SATA max UDMA/133 abar m2048@0x96704000 port 0x96704180 irq 24 [ 6.747516] ata3: DUMMY [ 6.747517] ata4: DUMMY [ 6.747520] ata5: SATA max UDMA/133 abar m2048@0x96704000 port 0x96704300 irq 24 [ 6.747523] ata6: SATA max UDMA/133 abar m2048@0x96704000 port 0x96704380 irq 24 [ 6.771178] usb 6-1: new low-speed USB device number 2 using uhci_hcd [ 6.797571] pci 0000:00:00.0: Intel GM45 Chipset [ 6.797599] pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable [ 6.797914] pci 0000:00:00.0: detected 131072K stolen memory [ 6.798063] checking generic (80000000 300000) vs hw (80000000 10000000) [ 6.798064] fb0: switching to inteldrmfb from VESA VGA [ 6.798225] i915 0000:00:02.0: vgaarb: deactivate vga console [ 6.799190] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 6.799192] [drm] Driver supports precise vblank timestamp query. [ 6.800348] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 6.803850] random: fast init done [ 6.836638] [drm] RC6 disabled, disabling runtime PM support [ 6.837472] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 6.837509] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 6.837516] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 6.838390] [drm] Initialized i915 1.6.0 20190822 for 0000:00:02.0 on minor 0 [ 6.839357] ACPI: Video Device [OVGA] (multi-head: yes rom: no post: no) [ 6.840715] acpi device:03: registered as cooling_device3 [ 6.840808] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6 [ 6.960660] usb 6-1: New USB device found, idVendor=0101, idProduct=0007, bcdDevice= 1.00 [ 6.960664] usb 6-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 6.960666] usb 6-1: Product: USB OPTICAL MOUSE [ 6.975280] hidraw: raw HID events driver (C) Jiri Kosina [ 6.990077] fbcon: i915drmfb (fb0) is primary device [ 6.990079] fbcon: Deferring console take-over [ 6.990083] i915 0000:00:02.0: fb0: i915drmfb frame buffer device [ 6.999367] usbcore: registered new interface driver usbhid [ 6.999368] usbhid: USB HID core driver [ 7.006792] input: USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1:1.0/0003:0101:0007.0001/input/input7 [ 7.006988] hid-generic 0003:0101:0007.0001: input,hidraw0: USB HID v1.11 Mouse [USB OPTICAL MOUSE ] on usb-0000:00:1d.1-1/input0 [ 7.063385] ata5: SATA link down (SStatus 0 SControl 300) [ 7.063429] ata1: SATA link down (SStatus 0 SControl 300) [ 7.224627] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 7.224767] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 7.226523] ata2.00: ATA-8: ST9250315AS, 0002SDM1, max UDMA/133 [ 7.226525] ata2.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 32) [ 7.227350] ata6.00: ATAPI: HL-DT-STDVDRAM GT30N, TN08, max UDMA/100 [ 7.228811] ata2.00: configured for UDMA/133 [ 7.229416] scsi 1:0:0:0: Direct-Access ATA ST9250315AS SDM1 PQ: 0 ANSI: 5 [ 7.229892] sd 1:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB) [ 7.229914] sd 1:0:0:0: [sda] Write Protect is off [ 7.229917] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 7.229956] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 7.229979] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 7.230347] ata6.00: configured for UDMA/100 [ 7.234436] scsi 5:0:0:0: CD-ROM HL-DT-ST DVDRAM GT30N TN08 PQ: 0 ANSI: 5 [ 7.296538] sda: sda1 sda2 sda3 sda4 < sda5 > [ 7.299477] sr 5:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 7.299480] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 7.316932] sd 1:0:0:0: [sda] Attached SCSI disk [ 7.332673] sr 5:0:0:0: Attached scsi CD-ROM sr0 [ 7.332807] sr 5:0:0:0: Attached scsi generic sg1 type 5 [ 7.568324] psmouse serio1: synaptics: queried max coordinates: x [..5692], y [..4680] [ 7.665903] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000/0xa0000/0x0, board id: 0, fw id: 582762 [ 7.665909] psmouse serio1: synaptics: Toshiba Satellite C650 detected, limiting rate to 40pps. [ 7.725958] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5 [ 7.961302] usb 1-2: New USB device found, idVendor=10f1, idProduct=1a2a, bcdDevice=18.15 [ 7.961305] usb 1-2: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 7.961307] usb 1-2: Product: USB Camera [ 7.961309] usb 1-2: Manufacturer: Generic [ 7.961311] usb 1-2: SerialNumber: MU418ASA [ 8.104656] usb 1-3: new high-speed USB device number 3 using ehci-pci [ 8.527031] usb 1-3: New USB device found, idVendor=0bda, idProduct=0138, bcdDevice=38.82 [ 8.527033] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 8.527036] usb 1-3: Product: USB2.0-CRW [ 8.527037] usb 1-3: Manufacturer: Generic [ 8.527039] usb 1-3: SerialNumber: 20090516388200000 [ 8.543991] usbcore: registered new interface driver usb-storage [ 8.550041] usbcore: registered new interface driver uas [ 8.555710] ums-realtek 1-3:1.0: USB Mass Storage device detected [ 8.559328] scsi host6: usb-storage 1-3:1.0 [ 8.559468] usbcore: registered new interface driver ums-realtek [ 9.571591] scsi 6:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS [ 9.571995] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 9.614058] sd 6:0:0:0: [sdb] Attached SCSI removable disk [ 10.085373] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) [ 11.695975] random: crng init done [ 11.695977] random: 7 urandom warning(s) missed due to ratelimiting [ 11.989465] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 12.008747] systemd[1]: Detected architecture x86. [ 12.036206] systemd[1]: Set hostname to . [ 12.061027] systemd[1]: Initializing machine ID from random generator. [ 12.061099] systemd[1]: Installed transient /etc/machine-id file. [ 13.787553] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 13.787664] systemd[1]: Reached target User and Group Name Lookups. [ 13.788065] systemd[1]: Created slice User and Session Slice. [ 13.788111] systemd[1]: Reached target Remote File Systems. [ 13.788433] systemd[1]: Created slice System Slice. [ 14.120698] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro [ 14.193201] lp: driver loaded but no devices found [ 14.211122] ppdev: user-space parallel port driver [ 14.316459] systemd-journald[324]: Received request to flush runtime journal from PID 1 [ 14.912665] Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k FS [ 17.253363] toshiba_acpi: Toshiba Laptop ACPI Extras version 0.24 [ 17.297465] input: Toshiba input device as /devices/virtual/input/input8 [ 17.352045] toshiba_acpi: Supported laptop features: hotkeys touchpad cooling-method [ 17.610701] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMBA) (20190816/utaddress-213) [ 17.610710] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 17.610714] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000053B (\GPIO) (20190816/utaddress-213) [ 17.610718] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 17.610719] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000053B (\GPIO) (20190816/utaddress-213) [ 17.610723] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 17.610724] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 17.802995] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 17.806154] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 17.887342] audit: type=1400 audit(1645951529.980:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=454 comm="apparmor_parser" [ 17.887353] audit: type=1400 audit(1645951529.980:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=454 comm="apparmor_parser" [ 17.887357] audit: type=1400 audit(1645951529.980:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=454 comm="apparmor_parser" [ 17.924052] audit: type=1400 audit(1645951530.016:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=473 comm="apparmor_parser" [ 17.969228] audit: type=1400 audit(1645951530.064:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=475 comm="apparmor_parser" [ 17.982803] intel_powerclamp: No package C-state available [ 17.990467] audit: type=1400 audit(1645951530.084:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=452 comm="apparmor_parser" [ 17.990473] audit: type=1400 audit(1645951530.084:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=452 comm="apparmor_parser" [ 17.990477] audit: type=1400 audit(1645951530.084:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=452 comm="apparmor_parser" [ 17.990481] audit: type=1400 audit(1645951530.084:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=452 comm="apparmor_parser" [ 18.002727] audit: type=1400 audit(1645951530.096:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=477 comm="apparmor_parser" [ 18.005589] intel_powerclamp: No package C-state available [ 18.206771] ath: phy0: Enable LNA combining [ 18.209326] ath: phy0: ASPM enabled: 0x42 [ 18.209331] ath: EEPROM regdomain: 0x65 [ 18.209332] ath: EEPROM indicates we should expect a direct regpair map [ 18.209334] ath: Country alpha2 being used: 00 [ 18.209335] ath: Regpair used: 0x65 [ 18.212897] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 18.216923] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xf7f40000, irq=17 [ 18.222244] ath9k 0000:03:00.0 wlp3s0: renamed from wlan0 [ 18.437606] mc: Linux media interface: v0.10 [ 18.475785] videodev: Linux video capture interface: v2.00 [ 18.623118] uvcvideo: Found UVC 1.00 device USB Camera (10f1:1a2a) [ 18.655000] input: USB Camera: Toshiba Webcam as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input9 [ 18.655134] usbcore: registered new interface driver uvcvideo [ 18.655135] USB Video Class driver (1.1.1) [ 18.792311] snd_hda_codec_conexant hdaudioC0D0: CX20585: BIOS auto-probing. [ 18.793513] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20585: line_outs=1 (0x1f/0x0/0x0/0x0/0x0) type:speaker [ 18.793517] snd_hda_codec_conexant hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 18.793520] snd_hda_codec_conexant hdaudioC0D0: hp_outs=1 (0x19/0x0/0x0/0x0/0x0) [ 18.793521] snd_hda_codec_conexant hdaudioC0D0: mono: mono_out=0x0 [ 18.793523] snd_hda_codec_conexant hdaudioC0D0: inputs: [ 18.793526] snd_hda_codec_conexant hdaudioC0D0: Internal Mic=0x23 [ 18.793528] snd_hda_codec_conexant hdaudioC0D0: Mic=0x1b [ 18.803059] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 18.803159] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 287.724290] perf: interrupt took too long (2501 > 2500), lowering kernel.perf_event_max_sample_rate to 79750 [ 318.600635] perf: interrupt took too long (3143 > 3126), lowering kernel.perf_event_max_sample_rate to 63500 [ 393.440819] perf: interrupt took too long (3936 > 3928), lowering kernel.perf_event_max_sample_rate to 50750 [ 725.649580] perf: interrupt took too long (4925 > 4920), lowering kernel.perf_event_max_sample_rate to 40500 [ 1296.098062] wlp3s0: authenticate with ae:86:af:32:f9:ed [ 1296.118190] wlp3s0: send auth to ae:86:af:32:f9:ed (try 1/3) [ 1296.159007] wlp3s0: send auth to ae:86:af:32:f9:ed (try 2/3) [ 1296.208863] wlp3s0: send auth to ae:86:af:32:f9:ed (try 3/3) [ 1296.266983] wlp3s0: authentication with ae:86:af:32:f9:ed timed out [ 2130.751390] wlp3s0: authenticate with 12:e2:ff:b1:8b:ef [ 2130.801892] wlp3s0: send auth to 12:e2:ff:b1:8b:ef (try 1/3) [ 2130.822229] wlp3s0: authenticated [ 2130.825019] wlp3s0: associate with 12:e2:ff:b1:8b:ef (try 1/3) [ 2130.832469] wlp3s0: RX AssocResp from 12:e2:ff:b1:8b:ef (capab=0x411 status=0 aid=1) [ 2130.832692] wlp3s0: associated [ 2130.833385] ath: EEPROM regdomain: 0x81ac [ 2130.833387] ath: EEPROM indicates we should expect a country code [ 2130.833388] ath: doing EEPROM country->regdmn map search [ 2130.833389] ath: country maps to regdmn code: 0x37 [ 2130.833390] ath: Country alpha2 being used: LV [ 2130.833391] ath: Regpair used: 0x37 [ 2130.833393] ath: regdomain 0x81ac dynamically updated by country element [ 2130.855860] wlp3s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 12:e2:ff:b1:8b:ef [ 2130.925356] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [ 2594.325637] perf: interrupt took too long (6168 > 6156), lowering kernel.perf_event_max_sample_rate to 32250 [ 2933.895549] wlp3s0: deauthenticated from 12:e2:ff:b1:8b:ef (Reason: 3=DEAUTH_LEAVING) [ 3561.589357] wlp3s0: authenticate with f2:83:7d:4e:15:5f [ 3561.603999] wlp3s0: send auth to f2:83:7d:4e:15:5f (try 1/3) [ 3561.606074] wlp3s0: authenticated [ 3561.608694] wlp3s0: associate with f2:83:7d:4e:15:5f (try 1/3) [ 3561.613547] wlp3s0: RX AssocResp from f2:83:7d:4e:15:5f (capab=0x431 status=0 aid=1) [ 3561.613680] wlp3s0: associated [ 3561.613820] ath: EEPROM regdomain: 0x81ac [ 3561.613821] ath: EEPROM indicates we should expect a country code [ 3561.613823] ath: doing EEPROM country->regdmn map search [ 3561.613824] ath: country maps to regdmn code: 0x37 [ 3561.613825] ath: Country alpha2 being used: LV [ 3561.613826] ath: Regpair used: 0x37 [ 3561.613828] ath: regdomain 0x81ac dynamically updated by country element [ 3561.629344] wlp3s0: Limiting TX power to 20 (20 - 0) dBm as advertised by f2:83:7d:4e:15:5f [ 3561.688671] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [ 3756.310693] wlp3s0: authenticate with f2:83:7d:4e:15:5f [ 3756.330273] wlp3s0: send auth to f2:83:7d:4e:15:5f (try 1/3) [ 3756.372909] wlp3s0: authenticated [ 3756.376645] wlp3s0: associate with f2:83:7d:4e:15:5f (try 1/3) [ 3756.397602] wlp3s0: RX AssocResp from f2:83:7d:4e:15:5f (capab=0x431 status=0 aid=1) [ 3756.397752] wlp3s0: associated [ 3756.397887] ath: EEPROM regdomain: 0x81ac [ 3756.397889] ath: EEPROM indicates we should expect a country code [ 3756.397891] ath: doing EEPROM country->regdmn map search [ 3756.397892] ath: country maps to regdmn code: 0x37 [ 3756.397893] ath: Country alpha2 being used: LV [ 3756.397894] ath: Regpair used: 0x37 [ 3756.397895] ath: regdomain 0x81ac dynamically updated by country element [ 3756.597048] wlp3s0: Limiting TX power to 20 (20 - 0) dBm as advertised by f2:83:7d:4e:15:5f [ 3769.147519] wlp3s0: authenticate with f2:83:7d:4e:15:5f [ 3769.165726] wlp3s0: send auth to f2:83:7d:4e:15:5f (try 1/3) [ 3769.220634] wlp3s0: send auth to f2:83:7d:4e:15:5f (try 2/3) [ 3769.301945] wlp3s0: send auth to f2:83:7d:4e:15:5f (try 3/3) [ 3769.351090] wlp3s0: authentication with f2:83:7d:4e:15:5f timed out [11577.228278] wlp3s0: authenticate with c6:a5:c5:c6:82:ce [11577.242624] wlp3s0: send auth to c6:a5:c5:c6:82:ce (try 1/3) [11577.246058] wlp3s0: authenticated [11577.248871] wlp3s0: associate with c6:a5:c5:c6:82:ce (try 1/3) [11577.253252] wlp3s0: RX AssocResp from c6:a5:c5:c6:82:ce (capab=0x411 status=0 aid=1) [11577.253417] wlp3s0: associated [11577.253563] ath: EEPROM regdomain: 0x8114 [11577.253564] ath: EEPROM indicates we should expect a country code [11577.253565] ath: doing EEPROM country->regdmn map search [11577.253566] ath: country maps to regdmn code: 0x37 [11577.253567] ath: Country alpha2 being used: DE [11577.253568] ath: Regpair used: 0x37 [11577.253569] ath: regdomain 0x8114 dynamically updated by country element [11577.279549] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [11577.297034] wlp3s0: Limiting TX power to 20 (20 - 0) dBm as advertised by c6:a5:c5:c6:82:ce [11800.865472] wlp3s0: deauthenticated from c6:a5:c5:c6:82:ce (Reason: 3=DEAUTH_LEAVING) [12098.144541] wlp3s0: authenticate with c6:87:66:f9:2b:6a [12098.174805] wlp3s0: send auth to c6:87:66:f9:2b:6a (try 1/3) [12098.176743] wlp3s0: authenticated [12098.180691] wlp3s0: associate with c6:87:66:f9:2b:6a (try 1/3) [12098.185043] wlp3s0: RX AssocResp from c6:87:66:f9:2b:6a (capab=0x431 status=0 aid=1) [12098.185213] wlp3s0: associated [12098.185367] ath: EEPROM regdomain: 0x8114 [12098.185368] ath: EEPROM indicates we should expect a country code [12098.185369] ath: doing EEPROM country->regdmn map search [12098.185370] ath: country maps to regdmn code: 0x37 [12098.185371] ath: Country alpha2 being used: DE [12098.185372] ath: Regpair used: 0x37 [12098.185374] ath: regdomain 0x8114 dynamically updated by country element [12098.223607] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [12098.384705] wlp3s0: Limiting TX power to 20 (20 - 0) dBm as advertised by c6:87:66:f9:2b:6a [12188.473183] printk: systemd: 33 output lines suppressed due to ratelimiting [12188.673860] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [12188.692715] systemd[1]: Detected architecture x86. [12189.499832] systemd[1]: Stopping Journal Service... [12189.548995] systemd-journald[324]: Received SIGTERM from PID 1 (systemd). [12189.931926] systemd[1]: Stopped Journal Service. [12189.936717] systemd[1]: Starting Journal Service... [12190.099974] systemd[1]: Started Journal Service. [12322.794426] wlp3s0: deauthenticating from c6:87:66:f9:2b:6a by local choice (Reason: 3=DEAUTH_LEAVING) [12325.732870] wlp3s0: authenticate with c6:87:66:f9:2b:6a [12325.753077] wlp3s0: send auth to c6:87:66:f9:2b:6a (try 1/3) [12325.755042] wlp3s0: authenticated [12325.776646] wlp3s0: associate with c6:87:66:f9:2b:6a (try 1/3) [12325.780452] wlp3s0: RX AssocResp from c6:87:66:f9:2b:6a (capab=0x431 status=0 aid=1) [12325.780647] wlp3s0: associated [12325.780792] ath: EEPROM regdomain: 0x8114 [12325.780793] ath: EEPROM indicates we should expect a country code [12325.780794] ath: doing EEPROM country->regdmn map search [12325.780795] ath: country maps to regdmn code: 0x37 [12325.780796] ath: Country alpha2 being used: DE [12325.780797] ath: Regpair used: 0x37 [12325.780798] ath: regdomain 0x8114 dynamically updated by country element [12325.854134] wlp3s0: Limiting TX power to 20 (20 - 0) dBm as advertised by c6:87:66:f9:2b:6a [12335.784064] wlp3s0: deauthenticating from c6:87:66:f9:2b:6a by local choice (Reason: 3=DEAUTH_LEAVING) [12336.803755] wlp3s0: authenticate with c6:87:66:f9:2b:6a [12336.822507] wlp3s0: send auth to c6:87:66:f9:2b:6a (try 1/3) [12336.842886] wlp3s0: authenticated [12336.848848] wlp3s0: associate with c6:87:66:f9:2b:6a (try 1/3) [12336.868420] wlp3s0: RX AssocResp from c6:87:66:f9:2b:6a (capab=0x431 status=0 aid=1) [12336.868647] wlp3s0: associated [12336.868811] ath: EEPROM regdomain: 0x8114 [12336.868812] ath: EEPROM indicates we should expect a country code [12336.868813] ath: doing EEPROM country->regdmn map search [12336.868814] ath: country maps to regdmn code: 0x37 [12336.868815] ath: Country alpha2 being used: DE [12336.868816] ath: Regpair used: 0x37 [12336.868818] ath: regdomain 0x8114 dynamically updated by country element [12336.914836] wlp3s0: Limiting TX power to 20 (20 - 0) dBm as advertised by c6:87:66:f9:2b:6a [12346.869264] wlp3s0: deauthenticating from c6:87:66:f9:2b:6a by local choice (Reason: 3=DEAUTH_LEAVING) [12350.083871] wlp3s0: authenticate with c6:87:66:f9:2b:6a [12350.098010] wlp3s0: send auth to c6:87:66:f9:2b:6a (try 1/3) [12350.104305] wlp3s0: authenticated [12350.108655] wlp3s0: associate with c6:87:66:f9:2b:6a (try 1/3) [12350.112764] wlp3s0: RX AssocResp from c6:87:66:f9:2b:6a (capab=0x411 status=0 aid=1) [12350.112939] wlp3s0: associated [12350.113099] ath: EEPROM regdomain: 0x8114 [12350.113101] ath: EEPROM indicates we should expect a country code [12350.113102] ath: doing EEPROM country->regdmn map search [12350.113103] ath: country maps to regdmn code: 0x37 [12350.113104] ath: Country alpha2 being used: DE [12350.113105] ath: Regpair used: 0x37 [12350.113107] ath: regdomain 0x8114 dynamically updated by country element [12350.126709] wlp3s0: Limiting TX power to 20 (20 - 0) dBm as advertised by c6:87:66:f9:2b:6a [12360.117365] wlp3s0: deauthenticating from c6:87:66:f9:2b:6a by local choice (Reason: 3=DEAUTH_LEAVING) [12363.977088] SGI XFS with ACLs, security attributes, realtime, no debug enabled [12364.011130] JFS: nTxBlock = 8192, nTxLock = 65536 [12364.143016] ntfs: driver 2.1.32 [Flags: R/O MODULE]. [12364.291163] QNX4 filesystem 0.2.3 registered. [12364.396610] raid6: sse2x2 gen() 3208 MB/s [12364.444612] raid6: sse2x2 xor() 4069 MB/s [12364.492603] raid6: sse2x1 gen() 2778 MB/s [12364.540618] raid6: sse2x1 xor() 3383 MB/s [12364.588609] raid6: sse1x2 gen() 2078 MB/s [12364.636628] raid6: sse1x1 gen() 1559 MB/s [12364.636631] raid6: using algorithm sse2x2 gen() 3208 MB/s [12364.636632] raid6: .... xor() 4069 MB/s, rmw enabled [12364.636634] raid6: using ssse3x1 recovery algorithm [12364.655037] xor: measuring software checksum speed [12364.692599] pIII_sse : 8293.000 MB/sec [12364.732599] prefetch64-sse: 9586.000 MB/sec [12364.732602] xor: using function: prefetch64-sse (9586.000 MB/sec) [12364.801424] Btrfs loaded, crc32c=crc32c-generic [12371.058482] wlp3s0: authenticate with c6:87:66:f9:2b:6a [12371.078841] wlp3s0: send auth to c6:87:66:f9:2b:6a (try 1/3) [12371.091234] wlp3s0: authenticated [12371.100661] wlp3s0: associate with c6:87:66:f9:2b:6a (try 1/3) [12371.114981] wlp3s0: RX AssocResp from c6:87:66:f9:2b:6a (capab=0x411 status=0 aid=1) [12371.115148] wlp3s0: associated [12371.115284] ath: EEPROM regdomain: 0x8114 [12371.115285] ath: EEPROM indicates we should expect a country code [12371.115286] ath: doing EEPROM country->regdmn map search [12371.115287] ath: country maps to regdmn code: 0x37 [12371.115288] ath: Country alpha2 being used: DE [12371.115289] ath: Regpair used: 0x37 [12371.115290] ath: regdomain 0x8114 dynamically updated by country element [12371.123037] wlp3s0: Limiting TX power to 20 (20 - 0) dBm as advertised by c6:87:66:f9:2b:6a [12375.009627] wlp3s0: deauthenticating from c6:87:66:f9:2b:6a by local choice (Reason: 3=DEAUTH_LEAVING) [12375.138979] wlp3s0: authenticate with c6:87:66:f9:2b:6a [12375.153951] wlp3s0: send auth to c6:87:66:f9:2b:6a (try 1/3) [12375.156420] wlp3s0: authenticated [12375.160660] wlp3s0: associate with c6:87:66:f9:2b:6a (try 1/3) [12375.164461] wlp3s0: RX AssocResp from c6:87:66:f9:2b:6a (capab=0x411 status=0 aid=1) [12375.164671] wlp3s0: associated [12375.165483] ath: EEPROM regdomain: 0x8114 [12375.165486] ath: EEPROM indicates we should expect a country code [12375.165487] ath: doing EEPROM country->regdmn map search [12375.165488] ath: country maps to regdmn code: 0x37 [12375.165489] ath: Country alpha2 being used: DE [12375.165490] ath: Regpair used: 0x37 [12375.165492] ath: regdomain 0x8114 dynamically updated by country element [12375.220175] wlp3s0: Limiting TX power to 20 (20 - 0) dBm as advertised by c6:87:66:f9:2b:6a [12385.165656] wlp3s0: deauthenticating from c6:87:66:f9:2b:6a by local choice (Reason: 3=DEAUTH_LEAVING) [12396.149520] wlp3s0: authenticate with c6:87:66:f9:2b:6a [12396.168129] wlp3s0: send auth to c6:87:66:f9:2b:6a (try 1/3) [12396.171297] wlp3s0: authenticated [12396.176660] wlp3s0: associate with c6:87:66:f9:2b:6a (try 1/3) [12396.180833] wlp3s0: RX AssocResp from c6:87:66:f9:2b:6a (capab=0x411 status=0 aid=1) [12396.181006] wlp3s0: associated [12396.181170] ath: EEPROM regdomain: 0x8114 [12396.181171] ath: EEPROM indicates we should expect a country code [12396.181173] ath: doing EEPROM country->regdmn map search [12396.181174] ath: country maps to regdmn code: 0x37 [12396.181176] ath: Country alpha2 being used: DE [12396.181177] ath: Regpair used: 0x37 [12396.181178] ath: regdomain 0x8114 dynamically updated by country element [12396.319256] wlp3s0: Limiting TX power to 20 (20 - 0) dBm as advertised by c6:87:66:f9:2b:6a [12400.001973] wlp3s0: deauthenticating from c6:87:66:f9:2b:6a by local choice (Reason: 3=DEAUTH_LEAVING) [12404.362403] kauditd_printk_skb: 12 callbacks suppressed [12404.362405] audit: type=1400 audit(1645963916.457:24): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=3181 comm="apparmor_parser" [12404.363654] audit: type=1400 audit(1645963916.457:25): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=3181 comm="apparmor_parser" [12404.364572] audit: type=1400 audit(1645963916.457:26): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=3181 comm="apparmor_parser" [12404.365552] audit: type=1400 audit(1645963916.461:27): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=3181 comm="apparmor_parser" [12429.103806] audit: type=1400 audit(1645963941.195:28): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=3510 comm="apparmor_parser" [12429.117131] audit: type=1400 audit(1645963941.211:29): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=3510 comm="apparmor_parser" [12801.361913] wlp3s0: authenticate with c6:87:66:f9:2b:6a [12801.389245] wlp3s0: send auth to c6:87:66:f9:2b:6a (try 1/3) [12801.391188] wlp3s0: authenticated [12801.396645] wlp3s0: associate with c6:87:66:f9:2b:6a (try 1/3) [12801.401367] wlp3s0: RX AssocResp from c6:87:66:f9:2b:6a (capab=0x411 status=0 aid=1) [12801.401531] wlp3s0: associated [12801.401668] ath: EEPROM regdomain: 0x8114 [12801.401670] ath: EEPROM indicates we should expect a country code [12801.401671] ath: doing EEPROM country->regdmn map search [12801.401672] ath: country maps to regdmn code: 0x37 [12801.401673] ath: Country alpha2 being used: DE [12801.401674] ath: Regpair used: 0x37 [12801.401676] ath: regdomain 0x8114 dynamically updated by country element [12801.413467] wlp3s0: Limiting TX power to 20 (20 - 0) dBm as advertised by c6:87:66:f9:2b:6a [12811.404782] wlp3s0: deauthenticating from c6:87:66:f9:2b:6a by local choice (Reason: 3=DEAUTH_LEAVING) [12822.443011] wlp3s0: authenticate with c6:87:66:f9:2b:6a [12822.469171] wlp3s0: send auth to c6:87:66:f9:2b:6a (try 1/3) [12822.477705] wlp3s0: authenticated [12822.481092] wlp3s0: associate with c6:87:66:f9:2b:6a (try 1/3) [12822.485380] wlp3s0: RX AssocResp from c6:87:66:f9:2b:6a (capab=0x411 status=0 aid=1) [12822.485549] wlp3s0: associated [12822.485713] ath: EEPROM regdomain: 0x8114 [12822.485714] ath: EEPROM indicates we should expect a country code [12822.485715] ath: doing EEPROM country->regdmn map search [12822.485716] ath: country maps to regdmn code: 0x37 [12822.485717] ath: Country alpha2 being used: DE [12822.485718] ath: Regpair used: 0x37 [12822.485719] ath: regdomain 0x8114 dynamically updated by country element [12822.513277] wlp3s0: Limiting TX power to 20 (20 - 0) dBm as advertised by c6:87:66:f9:2b:6a [12826.006212] wlp3s0: deauthenticating from c6:87:66:f9:2b:6a by local choice (Reason: 3=DEAUTH_LEAVING) [12826.090733] wlp3s0: authenticate with c6:87:66:f9:2b:6a [12826.105851] wlp3s0: send auth to c6:87:66:f9:2b:6a (try 1/3) [12826.141903] wlp3s0: authenticated [12826.144712] wlp3s0: associate with c6:87:66:f9:2b:6a (try 1/3) [12826.149709] wlp3s0: RX AssocResp from c6:87:66:f9:2b:6a (capab=0x411 status=0 aid=1) [12826.149883] wlp3s0: associated [12826.150065] ath: EEPROM regdomain: 0x8114 [12826.150066] ath: EEPROM indicates we should expect a country code [12826.150067] ath: doing EEPROM country->regdmn map search [12826.150068] ath: country maps to regdmn code: 0x37 [12826.150069] ath: Country alpha2 being used: DE [12826.150070] ath: Regpair used: 0x37 [12826.150072] ath: regdomain 0x8114 dynamically updated by country element [12826.200846] wlp3s0: Limiting TX power to 20 (20 - 0) dBm as advertised by c6:87:66:f9:2b:6a [12836.151905] wlp3s0: deauthenticating from c6:87:66:f9:2b:6a by local choice (Reason: 3=DEAUTH_LEAVING) [12847.158222] wlp3s0: authenticate with c6:87:66:f9:2b:6a [12847.174634] wlp3s0: send auth to c6:87:66:f9:2b:6a (try 1/3) [12847.176980] wlp3s0: authenticated [12847.180679] wlp3s0: associate with c6:87:66:f9:2b:6a (try 1/3) [12847.184487] wlp3s0: RX AssocResp from c6:87:66:f9:2b:6a (capab=0x411 status=0 aid=1) [12847.184699] wlp3s0: associated [12847.184848] ath: EEPROM regdomain: 0x8114 [12847.184849] ath: EEPROM indicates we should expect a country code [12847.184850] ath: doing EEPROM country->regdmn map search [12847.184851] ath: country maps to regdmn code: 0x37 [12847.184852] ath: Country alpha2 being used: DE [12847.184853] ath: Regpair used: 0x37 [12847.184855] ath: regdomain 0x8114 dynamically updated by country element [12847.197972] wlp3s0: Limiting TX power to 20 (20 - 0) dBm as advertised by c6:87:66:f9:2b:6a [12847.799035] wlp3s0: deauthenticating from c6:87:66:f9:2b:6a by local choice (Reason: 3=DEAUTH_LEAVING) [12850.342471] wlp3s0: authenticate with c6:87:66:f9:2b:6a [12850.359334] wlp3s0: send auth to c6:87:66:f9:2b:6a (try 1/3) [12850.361607] wlp3s0: authenticated [12850.364830] wlp3s0: associate with c6:87:66:f9:2b:6a (try 1/3) [12850.368728] wlp3s0: RX AssocResp from c6:87:66:f9:2b:6a (capab=0x411 status=0 aid=1) [12850.368884] wlp3s0: associated [12850.369029] ath: EEPROM regdomain: 0x8114 [12850.369030] ath: EEPROM indicates we should expect a country code [12850.369032] ath: doing EEPROM country->regdmn map search [12850.369032] ath: country maps to regdmn code: 0x37 [12850.369034] ath: Country alpha2 being used: DE [12850.369034] ath: Regpair used: 0x37 [12850.369036] ath: regdomain 0x8114 dynamically updated by country element [12850.373200] wlp3s0: Limiting TX power to 20 (20 - 0) dBm as advertised by c6:87:66:f9:2b:6a [12860.376275] wlp3s0: deauthenticating from c6:87:66:f9:2b:6a by local choice (Reason: 3=DEAUTH_LEAVING) [12871.366509] wlp3s0: authenticate with c6:87:66:f9:2b:6a [12871.385451] wlp3s0: send auth to c6:87:66:f9:2b:6a (try 1/3) [12871.396639] wlp3s0: authenticated [12871.401020] wlp3s0: associate with c6:87:66:f9:2b:6a (try 1/3) [12871.405481] wlp3s0: RX AssocResp from c6:87:66:f9:2b:6a (capab=0x411 status=0 aid=1) [12871.405642] wlp3s0: associated [12871.405779] ath: EEPROM regdomain: 0x8114 [12871.405780] ath: EEPROM indicates we should expect a country code [12871.405781] ath: doing EEPROM country->regdmn map search [12871.405782] ath: country maps to regdmn code: 0x37 [12871.405783] ath: Country alpha2 being used: DE [12871.405784] ath: Regpair used: 0x37 [12871.405785] ath: regdomain 0x8114 dynamically updated by country element [12871.473109] wlp3s0: Limiting TX power to 20 (20 - 0) dBm as advertised by c6:87:66:f9:2b:6a [12876.003016] wlp3s0: deauthenticating from c6:87:66:f9:2b:6a by local choice (Reason: 3=DEAUTH_LEAVING) [12876.083153] wlp3s0: authenticate with c6:87:66:f9:2b:6a [12876.102489] wlp3s0: send auth to c6:87:66:f9:2b:6a (try 1/3) [12876.104506] wlp3s0: authenticated [12876.108676] wlp3s0: associate with c6:87:66:f9:2b:6a (try 1/3) [12876.112519] wlp3s0: RX AssocResp from c6:87:66:f9:2b:6a (capab=0x411 status=0 aid=1) [12876.112750] wlp3s0: associated [12876.113145] ath: EEPROM regdomain: 0x8114 [12876.113147] ath: EEPROM indicates we should expect a country code [12876.113148] ath: doing EEPROM country->regdmn map search [12876.113149] ath: country maps to regdmn code: 0x37 [12876.113151] ath: Country alpha2 being used: DE [12876.113152] ath: Regpair used: 0x37 [12876.113154] ath: regdomain 0x8114 dynamically updated by country element [12876.184819] wlp3s0: Limiting TX power to 20 (20 - 0) dBm as advertised by c6:87:66:f9:2b:6a [12886.119283] wlp3s0: deauthenticating from c6:87:66:f9:2b:6a by local choice (Reason: 3=DEAUTH_LEAVING) [12897.094373] wlp3s0: authenticate with c6:87:66:f9:2b:6a [12897.119690] wlp3s0: send auth to c6:87:66:f9:2b:6a (try 1/3) [12897.121733] wlp3s0: authenticated [12897.128643] wlp3s0: associate with c6:87:66:f9:2b:6a (try 1/3) [12897.132430] wlp3s0: RX AssocResp from c6:87:66:f9:2b:6a (capab=0x411 status=0 aid=1) [12897.132632] wlp3s0: associated [12897.132771] ath: EEPROM regdomain: 0x8114 [12897.132772] ath: EEPROM indicates we should expect a country code [12897.132773] ath: doing EEPROM country->regdmn map search [12897.132774] ath: country maps to regdmn code: 0x37 [12897.132775] ath: Country alpha2 being used: DE [12897.132776] ath: Regpair used: 0x37 [12897.132777] ath: regdomain 0x8114 dynamically updated by country element [12897.181945] wlp3s0: Limiting TX power to 20 (20 - 0) dBm as advertised by c6:87:66:f9:2b:6a [12901.001346] wlp3s0: deauthenticating from c6:87:66:f9:2b:6a by local choice (Reason: 3=DEAUTH_LEAVING) [12901.068940] wlp3s0: authenticate with c6:87:66:f9:2b:6a [12901.085431] wlp3s0: send auth to c6:87:66:f9:2b:6a (try 1/3) [12901.087731] wlp3s0: authenticated [12901.092763] wlp3s0: associate with c6:87:66:f9:2b:6a (try 1/3) [12901.101354] wlp3s0: RX AssocResp from c6:87:66:f9:2b:6a (capab=0x411 status=0 aid=1) [12901.101524] wlp3s0: associated [12901.101698] ath: EEPROM regdomain: 0x8114 [12901.101699] ath: EEPROM indicates we should expect a country code [12901.101700] ath: doing EEPROM country->regdmn map search [12901.101701] ath: country maps to regdmn code: 0x37 [12901.101703] ath: Country alpha2 being used: DE [12901.101703] ath: Regpair used: 0x37 [12901.101705] ath: regdomain 0x8114 dynamically updated by country element [12901.279250] wlp3s0: Limiting TX power to 20 (20 - 0) dBm as advertised by c6:87:66:f9:2b:6a [12911.103742] wlp3s0: deauthenticating from c6:87:66:f9:2b:6a by local choice (Reason: 3=DEAUTH_LEAVING) [12922.191061] wlp3s0: authenticate with c6:87:66:f9:2b:6a [12922.213886] wlp3s0: send auth to c6:87:66:f9:2b:6a (try 1/3) [12922.215909] wlp3s0: authenticated [12922.225116] wlp3s0: associate with c6:87:66:f9:2b:6a (try 1/3) [12922.229788] wlp3s0: RX AssocResp from c6:87:66:f9:2b:6a (capab=0x411 status=0 aid=1) [12922.229956] wlp3s0: associated [12922.230129] ath: EEPROM regdomain: 0x8114 [12922.230130] ath: EEPROM indicates we should expect a country code [12922.230131] ath: doing EEPROM country->regdmn map search [12922.230132] ath: country maps to regdmn code: 0x37 [12922.230133] ath: Country alpha2 being used: DE [12922.230134] ath: Regpair used: 0x37 [12922.230136] ath: regdomain 0x8114 dynamically updated by country element [12922.276335] wlp3s0: Limiting TX power to 20 (20 - 0) dBm as advertised by c6:87:66:f9:2b:6a [12926.012088] wlp3s0: deauthenticating from c6:87:66:f9:2b:6a by local choice (Reason: 3=DEAUTH_LEAVING) [12928.803256] wlp3s0: authenticate with c6:87:66:f9:2b:6a [12928.817196] wlp3s0: send auth to c6:87:66:f9:2b:6a (try 1/3) [12928.819401] wlp3s0: authenticated [12928.824690] wlp3s0: associate with c6:87:66:f9:2b:6a (try 1/3) [12928.828514] wlp3s0: RX AssocResp from c6:87:66:f9:2b:6a (capab=0x411 status=0 aid=1) [12928.828740] wlp3s0: associated [12928.828896] ath: EEPROM regdomain: 0x8114 [12928.828898] ath: EEPROM indicates we should expect a country code [12928.828899] ath: doing EEPROM country->regdmn map search [12928.828900] ath: country maps to regdmn code: 0x37 [12928.828901] ath: Country alpha2 being used: DE [12928.828902] ath: Regpair used: 0x37 [12928.828903] ath: regdomain 0x8114 dynamically updated by country element [12928.934037] wlp3s0: Limiting TX power to 20 (20 - 0) dBm as advertised by c6:87:66:f9:2b:6a [12938.831325] wlp3s0: deauthenticating from c6:87:66:f9:2b:6a by local choice (Reason: 3=DEAUTH_LEAVING) [12949.818532] wlp3s0: authenticate with c6:87:66:f9:2b:6a [12949.841286] wlp3s0: send auth to c6:87:66:f9:2b:6a (try 1/3) [12949.844509] wlp3s0: authenticated [12949.853338] wlp3s0: associate with c6:87:66:f9:2b:6a (try 1/3) [12949.857941] wlp3s0: RX AssocResp from c6:87:66:f9:2b:6a (capab=0x411 status=0 aid=1) [12949.858113] wlp3s0: associated [12949.858265] ath: EEPROM regdomain: 0x8114 [12949.858266] ath: EEPROM indicates we should expect a country code [12949.858267] ath: doing EEPROM country->regdmn map search [12949.858268] ath: country maps to regdmn code: 0x37 [12949.858269] ath: Country alpha2 being used: DE [12949.858270] ath: Regpair used: 0x37 [12949.858272] ath: regdomain 0x8114 dynamically updated by country element [12950.033804] wlp3s0: Limiting TX power to 20 (20 - 0) dBm as advertised by c6:87:66:f9:2b:6a [12954.005169] wlp3s0: deauthenticating from c6:87:66:f9:2b:6a by local choice (Reason: 3=DEAUTH_LEAVING) [12954.080452] wlp3s0: authenticate with c6:87:66:f9:2b:6a [12954.095862] wlp3s0: send auth to c6:87:66:f9:2b:6a (try 1/3) [12954.144938] wlp3s0: authenticated [12954.148666] wlp3s0: associate with c6:87:66:f9:2b:6a (try 1/3) [12954.152729] wlp3s0: RX AssocResp from c6:87:66:f9:2b:6a (capab=0x411 status=0 aid=1) [12954.152901] wlp3s0: associated [12954.153051] ath: EEPROM regdomain: 0x8114 [12954.153053] ath: EEPROM indicates we should expect a country code [12954.153053] ath: doing EEPROM country->regdmn map search [12954.153054] ath: country maps to regdmn code: 0x37 [12954.153056] ath: Country alpha2 being used: DE [12954.153056] ath: Regpair used: 0x37 [12954.153058] ath: regdomain 0x8114 dynamically updated by country element [12954.233507] wlp3s0: Limiting TX power to 20 (20 - 0) dBm as advertised by c6:87:66:f9:2b:6a [12964.159148] wlp3s0: deauthenticating from c6:87:66:f9:2b:6a by local choice (Reason: 3=DEAUTH_LEAVING) [12975.138451] wlp3s0: authenticate with c6:87:66:f9:2b:6a [12975.172826] wlp3s0: send auth to c6:87:66:f9:2b:6a (try 1/3) [12975.174739] wlp3s0: authenticated [12975.177977] wlp3s0: associate with c6:87:66:f9:2b:6a (try 1/3) [12975.181780] wlp3s0: RX AssocResp from c6:87:66:f9:2b:6a (capab=0x411 status=0 aid=1) [12975.181947] wlp3s0: associated [12975.183136] ath: EEPROM regdomain: 0x8114 [12975.183139] ath: EEPROM indicates we should expect a country code [12975.183140] ath: doing EEPROM country->regdmn map search [12975.183141] ath: country maps to regdmn code: 0x37 [12975.183142] ath: Country alpha2 being used: DE [12975.183143] ath: Regpair used: 0x37 [12975.183145] ath: regdomain 0x8114 dynamically updated by country element [12975.230622] wlp3s0: Limiting TX power to 20 (20 - 0) dBm as advertised by c6:87:66:f9:2b:6a [12979.007637] wlp3s0: deauthenticating from c6:87:66:f9:2b:6a by local choice (Reason: 3=DEAUTH_LEAVING) [12979.077417] wlp3s0: authenticate with c6:87:66:f9:2b:6a [12979.091156] wlp3s0: send auth to c6:87:66:f9:2b:6a (try 1/3) [12979.093265] wlp3s0: authenticated [12979.096700] wlp3s0: associate with c6:87:66:f9:2b:6a (try 1/3) [12979.100521] wlp3s0: RX AssocResp from c6:87:66:f9:2b:6a (capab=0x411 status=0 aid=1) [12979.100725] wlp3s0: associated [12979.100869] ath: EEPROM regdomain: 0x8114 [12979.100870] ath: EEPROM indicates we should expect a country code [12979.100871] ath: doing EEPROM country->regdmn map search [12979.100872] ath: country maps to regdmn code: 0x37 [12979.100875] ath: Country alpha2 being used: DE [12979.100876] ath: Regpair used: 0x37 [12979.100877] ath: regdomain 0x8114 dynamically updated by country element [12979.123055] wlp3s0: Limiting TX power to 20 (20 - 0) dBm as advertised by c6:87:66:f9:2b:6a [12989.102173] wlp3s0: deauthenticating from c6:87:66:f9:2b:6a by local choice (Reason: 3=DEAUTH_LEAVING) [13000.078902] wlp3s0: authenticate with c6:87:66:f9:2b:6a [13000.106921] wlp3s0: send auth to c6:87:66:f9:2b:6a (try 1/3) [13000.109939] wlp3s0: authenticated [13000.136674] wlp3s0: associate with c6:87:66:f9:2b:6a (try 1/3) [13000.169123] wlp3s0: RX AssocResp from c6:87:66:f9:2b:6a (capab=0x411 status=0 aid=1) [13000.169294] wlp3s0: associated [13000.169461] ath: EEPROM regdomain: 0x8114 [13000.169463] ath: EEPROM indicates we should expect a country code [13000.169464] ath: doing EEPROM country->regdmn map search [13000.169465] ath: country maps to regdmn code: 0x37 [13000.169466] ath: Country alpha2 being used: DE [13000.169467] ath: Regpair used: 0x37 [13000.169469] ath: regdomain 0x8114 dynamically updated by country element [13000.222553] wlp3s0: Limiting TX power to 20 (20 - 0) dBm as advertised by c6:87:66:f9:2b:6a [13004.018724] wlp3s0: deauthenticating from c6:87:66:f9:2b:6a by local choice (Reason: 3=DEAUTH_LEAVING) [13010.417232] wlp3s0: authenticate with c6:87:66:f9:2b:6a [13010.435601] wlp3s0: send auth to c6:87:66:f9:2b:6a (try 1/3) [13010.437825] wlp3s0: authenticated [13010.440868] wlp3s0: associate with c6:87:66:f9:2b:6a (try 1/3) [13010.444712] wlp3s0: RX AssocResp from c6:87:66:f9:2b:6a (capab=0x411 status=0 aid=1) [13010.444869] wlp3s0: associated [13010.445004] ath: EEPROM regdomain: 0x8114 [13010.445006] ath: EEPROM indicates we should expect a country code [13010.445007] ath: doing EEPROM country->regdmn map search [13010.445008] ath: country maps to regdmn code: 0x37 [13010.445009] ath: Country alpha2 being used: DE [13010.445010] ath: Regpair used: 0x37 [13010.445012] ath: regdomain 0x8114 dynamically updated by country element [13010.466796] wlp3s0: Limiting TX power to 20 (20 - 0) dBm as advertised by c6:87:66:f9:2b:6a [13020.453809] wlp3s0: deauthenticating from c6:87:66:f9:2b:6a by local choice (Reason: 3=DEAUTH_LEAVING) [13031.743960] wlp3s0: authenticate with 8e:70:b2:5c:11:b5 [13031.758842] wlp3s0: send auth to 8e:70:b2:5c:11:b5 (try 1/3) [13031.762868] wlp3s0: authenticated [13031.764836] wlp3s0: associate with 8e:70:b2:5c:11:b5 (try 1/3) [13031.773016] wlp3s0: RX AssocResp from 8e:70:b2:5c:11:b5 (capab=0x411 status=0 aid=2) [13031.773179] wlp3s0: associated [13031.967436] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready