[   20.092722] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   25.658132] init: Failed to spawn vsftpd main process: unable to execute: No such file or directory
[   30.880043] eth0: no IPv6 routers present
[ 5028.326501] PM: Syncing filesystems ... done.
[ 5028.333364] PM: Preparing system for standby sleep
[ 5028.333392] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 5028.352076] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 5028.368052] PM: Entering standby sleep
[ 5028.368194] Suspending console(s) (use no_console_suspend to debug)
[ 5028.369076] sd 2:0:0:0: [sdc] Synchronizing SCSI cache
[ 5028.369220] sd 2:0:0:0: [sdc] Stopping disk
[ 5028.369282] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[ 5028.369340] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 5028.369369] sd 1:0:0:0: [sdb] Stopping disk
[ 5028.369856] serial 00:0a: disabled
[ 5028.369862] serial 00:0a: wake-up capability disabled by ACPI
[ 5028.369956] serial 00:09: disabled
[ 5028.369961] serial 00:09: wake-up capability disabled by ACPI
[ 5028.369967] i8042 kbd 00:08: wake-up capability enabled by ACPI
[ 5028.369973] i8042 aux 00:07: wake-up capability disabled by ACPI
[ 5028.373061] ata_piix 0000:00:1f.1: PCI INT A disabled
[ 5028.373711] e1000e 0000:05:00.1: PCI INT B disabled
[ 5028.373808] e1000e 0000:05:00.1: PME# enabled
[ 5028.373828] pcieport 0000:02:02.0: wake-up capability enabled by ACPI
[ 5028.374118] e1000e 0000:05:00.0: PCI INT A disabled
[ 5028.374208] e1000e 0000:05:00.0: PME# enabled
[ 5028.374211] pcieport 0000:02:02.0: wake-up capability enabled by ACPI
[ 5028.408101] uhci_hcd 0000:00:1d.1: PCI INT B disabled
[ 5028.408150] uhci_hcd 0000:00:1d.2: PCI INT C disabled
[ 5028.408162] uhci_hcd 0000:00:1d.3: PCI INT D disabled
[ 5028.408168] uhci_hcd 0000:00:1d.0: PCI INT A disabled
[ 5028.436032] ehci_hcd 0000:00:1d.7: PCI INT A disabled
[ 5028.480096] snd_hda_intel 0000:04:00.0: PCI INT A disabled
[ 5028.481146] ACPI handle has no context!
[ 5028.496034] PM: suspend of drv:e1000e dev:0000:05:00.1 complete after 125.922 msecs
[ 5028.496077] PM: suspend of drv:e1000e dev:0000:05:00.0 complete after 125.900 msecs
[ 5028.496098] PM: suspend of drv:pcieport dev:0000:02:02.0 complete after 124.835 msecs
[ 5028.560715] sd 0:0:0:0: [sda] Stopping disk
[ 5028.604033] PM: suspend of drv:snd_hda_intel dev:0000:04:00.0 complete after 233.761 msecs
[ 5028.604049] PM: suspend of drv:pci dev:0000:03:00.0 complete after 232.837 msecs
[ 5028.604066] PM: suspend of drv:pcieport dev:0000:02:00.0 complete after 232.753 msecs
[ 5028.604081] PM: suspend of drv:pcieport dev:0000:01:00.0 complete after 232.708 msecs
[ 5028.604108] PM: suspend of drv:pcieport dev:0000:00:02.0 complete after 230.716 msecs
[ 5029.099572] PM: suspend of drv:sd dev:0:0:0:0 complete after 730.239 msecs
[ 5029.099594] PM: suspend of drv:scsi dev:target0:0:0 complete after 730.257 msecs
[ 5029.099614] PM: suspend of drv:scsi dev:host0 complete after 729.782 msecs
[ 5029.100022] ahci 0000:00:1f.2: PCI INT B disabled
[ 5029.224032] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 852.592 msecs
[ 5029.224054] PM: suspend of drv: dev:pci0000:00 complete after 850.557 msecs
[ 5029.224074] PM: suspend of devices complete after 855.511 msecs
[ 5029.224076] PM: suspend devices took 0.856 seconds
[ 5029.226585] ehci_hcd 0000:00:1d.7: PME# enabled
[ 5029.226594] ehci_hcd 0000:00:1d.7: wake-up capability enabled by ACPI
[ 5029.348033] PM: late suspend of drv:ehci_hcd dev:0000:00:1d.7 complete after 121.470 msecs
[ 5029.348084] uhci_hcd 0000:00:1d.3: wake-up capability enabled by ACPI
[ 5029.348153] uhci_hcd 0000:00:1d.2: wake-up capability enabled by ACPI
[ 5029.348189] uhci_hcd 0000:00:1d.1: wake-up capability enabled by ACPI
[ 5029.348225] uhci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
[ 5029.348398] PM: late suspend of devices complete after 124.318 msecs
[ 5029.348775] ACPI: Preparing to enter system sleep state S1
[ 5029.358019] PM: Saving platform NVS memory
[ 5029.362081] Disabling non-boot CPUs ...
[ 5029.364258] CPU 1 is now offline
[ 5029.468035] CPU 2 is now offline
[ 5029.572032] CPU 3 is now offline
[ 5029.676036] CPU 4 is now offline
[ 5029.780028] CPU 5 is now offline
[ 5029.780818] Broke affinity for irq 23
[ 5029.884022] CPU 6 is now offline
[ 5029.988017] CPU 7 is now offline
[ 5029.988376] Extended CMOS year: 2000
[ 5029.992008] PM: Restoring platform NVS memory
[ 5029.992008] Extended CMOS year: 2000
[ 5029.992008] Enabling non-boot CPUs ...
[ 5029.992008] Booting Node 0 Processor 1 APIC 0x2
[ 5029.992008] smpboot cpu 1: start_ip = 97000
[ 5029.367091] Calibrating delay loop (skipped) already calibrated this CPU
[ 5030.000032] NMI watchdog enabled, takes one hw-pmu counter.
[ 5030.004094] CPU1 is up
[ 5030.004292] Booting Node 0 Processor 2 APIC 0x4
[ 5030.004294] smpboot cpu 2: start_ip = 97000
[ 5029.369659] Calibrating delay loop (skipped) already calibrated this CPU
[ 5030.015716] NMI watchdog enabled, takes one hw-pmu counter.
[ 5030.016112] CPU2 is up
[ 5030.016320] Booting Node 0 Processor 3 APIC 0x6
[ 5030.016322] smpboot cpu 3: start_ip = 97000
[ 5029.473130] Calibrating delay loop (skipped) already calibrated this CPU
[ 5030.027773] NMI watchdog enabled, takes one hw-pmu counter.
[ 5030.028149] CPU3 is up
[ 5030.028325] Booting Node 0 Processor 4 APIC 0x1
[ 5030.028327] smpboot cpu 4: start_ip = 97000
[ 5029.576903] Calibrating delay loop (skipped) already calibrated this CPU
[ 5030.039911] NMI watchdog enabled, takes one hw-pmu counter.
[ 5030.044098] CPU4 is up
[ 5030.044378] Booting Node 0 Processor 5 APIC 0x3
[ 5030.044379] smpboot cpu 5: start_ip = 97000
[ 5029.681116] Calibrating delay loop (skipped) already calibrated this CPU
[ 5030.056153] NMI watchdog enabled, takes one hw-pmu counter.
[ 5030.060102] CPU5 is up
[ 5030.060379] Booting Node 0 Processor 6 APIC 0x5
[ 5030.060380] smpboot cpu 6: start_ip = 97000
[ 5029.784731] Calibrating delay loop (skipped) already calibrated this CPU
[ 5030.072240] NMI watchdog enabled, takes one hw-pmu counter.
[ 5030.076174] CPU6 is up
[ 5030.076390] Booting Node 0 Processor 7 APIC 0x7
[ 5030.076392] smpboot cpu 7: start_ip = 97000
[ 5029.888490] Calibrating delay loop (skipped) already calibrated this CPU
[ 5030.088331] NMI watchdog enabled, takes one hw-pmu counter.
[ 5030.092176] CPU7 is up
[ 5030.100363] ACPI: Waking up from system sleep state S1
[ 5030.115666] uhci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
[ 5030.115703] uhci_hcd 0000:00:1d.1: wake-up capability disabled by ACPI
[ 5030.115740] uhci_hcd 0000:00:1d.2: wake-up capability disabled by ACPI
[ 5030.115776] uhci_hcd 0000:00:1d.3: wake-up capability disabled by ACPI
[ 5030.236037] ehci_hcd 0000:00:1d.7: BAR 0: set to [mem 0xcbc00400-0xcbc007ff] (PCI address [0xcbc00400-0xcbc007ff])
[ 5030.236050] ehci_hcd 0000:00:1d.7: restoring config space at offset 0xf (was 0x100, writing 0x105)
[ 5030.236070] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900102)
[ 5030.236086] ehci_hcd 0000:00:1d.7: wake-up capability disabled by ACPI
[ 5030.236092] ehci_hcd 0000:00:1d.7: PME# disabled
[ 5030.236192] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2880001, writing 0x2880005)
[ 5030.360027] ahci 0000:00:1f.2: BAR 0: set to [io  0x40d8-0x40df] (PCI address [0x40d8-0x40df])
[ 5030.360032] ahci 0000:00:1f.2: BAR 1: set to [io  0x40f4-0x40f7] (PCI address [0x40f4-0x40f7])
[ 5030.360037] ahci 0000:00:1f.2: BAR 2: set to [io  0x40d0-0x40d7] (PCI address [0x40d0-0x40d7])
[ 5030.360042] ahci 0000:00:1f.2: BAR 3: set to [io  0x40f0-0x40f3] (PCI address [0x40f0-0x40f3])
[ 5030.360047] ahci 0000:00:1f.2: BAR 4: set to [io  0x4020-0x403f] (PCI address [0x4020-0x403f])
[ 5030.360052] ahci 0000:00:1f.2: BAR 5: set to [mem 0xcbc00000-0xcbc003ff] (PCI address [0xcbc00000-0xcbc003ff])
[ 5030.360074] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00043, writing 0x2b00047)
[ 5030.612123] e1000e 0000:05:00.0: BAR 0: set to [mem 0xcb820000-0xcb83ffff] (PCI address [0xcb820000-0xcb83ffff])
[ 5030.612203] e1000e 0000:05:00.0: BAR 1: set to [mem 0xcb400000-0xcb7fffff] (PCI address [0xcb400000-0xcb7fffff])
[ 5030.612294] e1000e 0000:05:00.0: BAR 2: set to [io  0x3020-0x303f] (PCI address [0x3020-0x303f])
[ 5030.612798] e1000e 0000:05:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
[ 5030.613485] e1000e 0000:05:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100147)
[ 5030.736127] e1000e 0000:05:00.1: BAR 0: set to [mem 0xcb800000-0xcb81ffff] (PCI address [0xcb800000-0xcb81ffff])
[ 5030.736208] e1000e 0000:05:00.1: BAR 1: set to [mem 0xcb000000-0xcb3fffff] (PCI address [0xcb000000-0xcb3fffff])
[ 5030.736300] e1000e 0000:05:00.1: BAR 2: set to [io  0x3000-0x301f] (PCI address [0x3000-0x301f])
[ 5030.736803] e1000e 0000:05:00.1: restoring config space at offset 0xf (was 0x200, writing 0x205)
[ 5030.737491] e1000e 0000:05:00.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100147)
[ 5030.738393] PM: early resume of devices complete after 623.154 msecs
[ 5030.738496] ioatdma 0000:00:08.0: setting latency timer to 64
[ 5030.738532] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 5030.738539] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 5030.738549] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[ 5030.738564] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 23 (level, low) -> IRQ 23
[ 5030.738575] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 5030.738579] usb usb2: root hub lost power or was reset
[ 5030.738576] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 5030.738599] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 5030.738607] usb usb3: root hub lost power or was reset
[ 5030.738606] usb usb4: root hub lost power or was reset
[ 5030.738626] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 22 (level, low) -> IRQ 22
[ 5030.738661] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 5030.738681] pci 0000:00:1e.0: setting latency timer to 64
[ 5030.738699] pci 0000:00:1f.0: rerouting interrupts for [8086:2670]
[ 5030.738698] ata_piix 0000:00:1f.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 5030.738713] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 5030.738720] ahci 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[ 5030.738720] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 5030.738773] pcieport 0000:02:02.0: wake-up capability disabled by ACPI
[ 5030.738785] pcieport 0000:02:02.0: wake-up capability disabled by ACPI
[ 5030.738859] pci 0000:01:00.3: setting latency timer to 64
[ 5030.738864] ahci 0000:00:1f.2: setting latency timer to 64
[ 5030.739091] e1000e 0000:05:00.0: PME# disabled
[ 5030.739094] usb usb5: root hub lost power or was reset
[ 5030.739130] e1000e 0000:05:00.1: PME# disabled
[ 5030.739184] pci 0000:03:00.0: setting latency timer to 64
[ 5030.740423] i8042 kbd 00:08: wake-up capability disabled by ACPI
[ 5030.740432] snd_hda_intel 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5030.741342] sd 0:0:0:0: [sda] Starting disk
[ 5030.741467] sd 1:0:0:0: [sdb] Starting disk
[ 5030.741624] serial 00:09: activated
[ 5030.741678] sd 2:0:0:0: [sdc] Starting disk
[ 5030.741900] serial 00:0a: activated
[ 5030.743286] Extended CMOS year: 2000
[ 5030.744234] e1000e 0000:05:00.0: irq 65 for MSI/MSI-X
[ 5030.744280] e1000e 0000:05:00.1: irq 66 for MSI/MSI-X
[ 5030.917003] PM: resume of drv: dev:ep_00 complete after 176.543 msecs
[ 5030.917011] PM: resume of drv:hub dev:4-0:1.0 complete after 176.839 msecs
[ 5030.917018] PM: resume of drv:hub dev:3-0:1.0 complete after 176.909 msecs
[ 5030.917023] PM: resume of drv: dev:ep_00 complete after 176.923 msecs
[ 5030.917028] [Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 0
[ 5030.917034] PM: resume of drv: dev:ep_00 complete after 175.766 msecs
[ 5030.917044] PM: resume of drv: dev:ep_00 complete after 176.918 msecs
[ 5030.917055] [Hardware Error]: APEI generic hardware error status
[ 5030.917061] PM: resume of drv: dev:ep_81 complete after 176.931 msecs
[ 5030.917066] PM: resume of drv: dev:ep_81 complete after 176.880 msecs
[ 5030.917070] [Hardware Error]: severity: 2, corrected
[ 5030.917072] [Hardware Error]: section: 0, severity: 2, corrected
[ 5030.917075] PM: resume of drv:hub dev:2-0:1.0 complete after 177.613 msecs
[ 5030.917080] [Hardware Error]: flags: 0x01
[ 5030.917089] [Hardware Error]: primary
[ 5030.917091] [Hardware Error]: section_type: PCIe error
[ 5030.917092] [Firmware Warn]: error section length is too small
[ 5030.917095] PM: resume of drv: dev:ep_81 complete after 177.619 msecs
[ 5030.927870] PM: resume of drv:hub dev:5-0:1.0 complete after 186.669 msecs
[ 5030.928382] PM: resume of drv: dev:ep_81 complete after 187.141 msecs
[ 5030.936403] ata7.00: ACPI cmd ef/03:44:00:00:00:a0 (SET FEATURES) filtered out
[ 5030.936407] ata7.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[ 5030.952260] ata7.00: configured for UDMA/66
[ 5031.056077] ata5: SATA link down (SStatus 0 SControl 300)
[ 5031.056166] ata6: SATA link down (SStatus 0 SControl 300)
[ 5031.064065] ata4: SATA link down (SStatus 0 SControl 300)
[ 5031.228040] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 5031.228061] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 5031.228090] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 5031.229720] ata1.00: configured for UDMA/133
[ 5031.233738] PM: resume of drv:nvidia dev:0000:08:00.0 complete after 494.688 msecs
[ 5031.238502] ata2.00: configured for UDMA/133
[ 5031.238548] ata3.00: configured for UDMA/133
[ 5031.888897] PM: resume of drv:snd-usb-audio dev:1-3.1:1.1 complete after 1146.970 msecs
[ 5031.888905] PM: resume of drv:snd-usb-audio dev:1-3.1:1.2 complete after 1146.937 msecs
[ 5031.888912] PM: resume of drv:zc3xx dev:1-3.1:1.0 complete after 1147.091 msecs
[ 5031.888918] PM: resume of drv: dev:ep_00 complete after 1146.917 msecs
[ 5031.888928] PM: resume of drv: dev:ep_81 complete after 1147.079 msecs
[ 5031.888938] PM: resume of drv: dev:ep_82 complete after 1147.052 msecs
[ 5034.538162] PM: resume of drv:sd dev:2:0:0:0 complete after 3796.486 msecs
[ 5034.538184] PM: resume of drv:scsi_device dev:2:0:0:0 complete after 3796.460 msecs
[ 5034.635778] PM: resume of drv:sd dev:1:0:0:0 complete after 3894.314 msecs
[ 5034.635801] PM: resume of drv:scsi_device dev:1:0:0:0 complete after 3894.210 msecs
[ 5035.564237] PM: resume of drv:sd dev:0:0:0:0 complete after 4822.906 msecs
[ 5035.564258] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 4822.908 msecs
[ 5035.564262] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 4820.955 msecs
[ 5035.564513] PM: resume of devices complete after 4826.076 msecs
[ 5035.564809] PM: resume devices took 4.828 seconds
[ 5035.564855] PM: Finishing wakeup.
[ 5035.564857] Restarting tasks ... done.
[ 5036.229891] e1000e 0000:05:00.0: irq 65 for MSI/MSI-X
[ 5036.285331] e1000e 0000:05:00.0: irq 65 for MSI/MSI-X
[ 5036.288805] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 5036.313901] e1000e 0000:05:00.1: irq 66 for MSI/MSI-X
[ 5036.369327] e1000e 0000:05:00.1: irq 66 for MSI/MSI-X
[ 5036.372573] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 5039.038437] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 5039.040891] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 5044.039310] init: Failed to spawn vsftpd main process: unable to execute: No such file or directory
[ 5049.192020] eth0: no IPv6 routers present