[2516CTO, Conexant CX20585, Dock Mic] Reset to 0 at each plug-in

[Nick Barcet]

Since I upgrade to 12.10, it is not possible to get sound input from the combined headset/mic plug on my t410.
Output works fine in my headset.
Input works fine from the internal microphone

ProblemType: Bug
DistroRelease: Ubuntu 12.10
Package: alsa-base 1.0.25+dfsg-0ubuntu2
ProcVersionSignature: Ubuntu 3.5.0-15.22-generic 3.5.4
Uname: Linux 3.5.0-15-generic x86_64
ApportVersion: 2.5.2-0ubuntu4
Architecture: amd64
AudioDevicesInUse:
 USER PID ACCESS COMMAND
 /dev/snd/controlC0: nbarcet 2851 F.... pulseaudio
Date: Sat Sep 22 10:30:03 2012
EcryptfsInUse: Yes
InstallationMedia: Ubuntu 12.04 LTS "Precise Pangolin" - Alpha amd64 (20120201.2)
PackageArchitecture: all
ProcEnviron:
 LANGUAGE=en_US:en
 TERM=xterm
 PATH=(custom, no user)
 LANG=en_US.UTF-8
 SHELL=/bin/bash
SourcePackage: alsa-driver
Symptom: audio
Symptom_AlsaRecordingTest: ALSA recording test through plughw:Intel failed
Symptom_Card: Built-in Audio - HDA Intel
Symptom_DevicesInUse:
 USER PID ACCESS COMMAND
 /dev/snd/controlC0: nbarcet 2851 F.... pulseaudio
Symptom_Jack: Black Mic, Right
Symptom_Type: No sound at all
Title: [2516CTO, Conexant CX20585, Black Mic, Right] No sound at all
UpgradeStatus: Upgraded to quantal on 2012-09-16 (5 days ago)
dmi.bios.date: 02/01/2011
dmi.bios.vendor: LENOVO
dmi.bios.version: 6IET75WW (1.35 )
dmi.board.name: 2516CTO
dmi.board.vendor: LENOVO
dmi.board.version: Not Available
dmi.chassis.asset.tag: No Asset Information
dmi.chassis.type: 10
dmi.chassis.vendor: LENOVO
dmi.chassis.version: Not Available
dmi.modalias: dmi:bvnLENOVO:bvr6IET75WW(1.35):bd02/01/2011:svnLENOVO:pn2516CTO:pvrThinkPadT410:rvnLENOVO:rn2516CTO:rvrNotAvailable:cvnLENOVO:ct10:cvrNotAvailable:
dmi.product.name: 2516CTO
dmi.product.version: ThinkPad T410
dmi.sys.vendor: LENOVO

[Nick Barcet (nijaba)]

Fildling a bit, the problem seems to be linked to the alsa mixer levels and rec status which are reset everytime I unplug and replug my headset with microphone. Not very practical, specially since there are no way to set this from any tool in the system's setting panel...

[Raymond (superquad-vortex2)]

do you mean that you need ext mic boost at node 0x18 and ext mic capture volume and ext mic capture switch at node 0x14

Node 0x14 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L
  Control: name="Dock Mic Capture Volume", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=0, ofs=0
  Control: name="Dock Mic Capture Switch", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=0, ofs=0
  Control: name="Internal Mic Capture Volume", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=2, ofs=0
  Control: name="Internal Mic Capture Switch", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=2, ofs=0
  Device: name="CONEXANT Analog", type="Audio", device=0
  Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=1
  Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
  Converter: stream=4, channel=0
  SDI-Select: 0
  PCM:
    rates [0x160]: 44100 48000 96000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
  Power states: D0 D1 D2 D3 D3cold
  Power: setting=D0, actual=D0
  Connection: 4
     0x17* 0x18 0x23 0x24
Node 0x15 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L
  Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=1
  Amp-In vals: [0x80 0x80] [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a]
  Converter: stream=0, channel=0
  SDI-Select: 0
  PCM:
    rates [0x160]: 44100 48000 96000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
  Power states: D0 D1 D2 D3 D3cold
  Power: setting=D0, actual=D0
  Connection: 4
     0x17* 0x18 0x23 0x24
Node 0x16 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L
  Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=1
  Amp-In vals: [0x80 0x80] [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a]
  Converter: stream=0, channel=0
  SDI-Select: 0
  PCM:
    rates [0x160]: 44100 48000 96000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
  Power states: D0 D1 D2 D3 D3cold
  Power: setting=D0, actual=D0
  Connection: 4
     0x17* 0x18 0x23 0x24
Node 0x17 [Audio Selector] wcaps 0x30050d: Stereo Amp-Out
  Control: name="Dock Mic Boost Volume", index=0, device=0
    ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0
  Amp-Out vals: [0x00 0x00]
  Power states: D0 D1 D2 D3 D3cold
  Power: setting=D0, actual=D0
  Connection: 4
     0x1a 0x1b* 0x1d 0x1e
Node 0x18 [Audio Selector] wcaps 0x30050d: Stereo Amp-Out
  Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0
  Amp-Out vals: [0x00 0x00]
  Power states: D0 D1 D2 D3 D3cold
  Power: setting=D0, actual=D0
  Connection: 4
     0x1a* 0x1b 0x1d 0x1e

[Nick Barcet (nijaba)]

Not sure about Mic Boost, but Dock Mic Capture Volume & Dock Mic Capture Switch are both reset to 0 everytime I plug-in my headphone&mic.
If you gave me the command you used to produce the above output, I could be more specific. So far I have been using a gui to alsa mixer to set the values.

[Raymond (superquad-vortex2)]

try hda_analyzer to change the connection of node node 0x14 from 0x17 to node 0x18 and unmute the corresponding mute and volume slider and

 the mic boost volume at node 0x18

Node 0x14 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L
  Control: name="Dock Mic Capture Volume", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=0, ofs=0
  Control: name="Dock Mic Capture Switch", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=0, ofs=0
  Control: name="Internal Mic Capture Volume", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=2, ofs=0
  Control: name="Internal Mic Capture Switch", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=2, ofs=0
  Device: name="CONEXANT Analog", type="Audio", device=0
  Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=1
  Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
  Converter: stream=4, channel=0
  SDI-Select: 0
  PCM:
    rates [0x160]: 44100 48000 96000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
  Power states: D0 D1 D2 D3 D3cold
  Power: setting=D0, actual=D0
  Connection: 4
     0x17* 0x18 0x23 0x24

[Raymond (superquad-vortex2)]

change the node 0x18 from node 0x1a to node 0x1b and the amp out value

Node 0x18 [Audio Selector] wcaps 0x30050d: Stereo Amp-Out
  Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0
  Amp-Out vals: [0x00 0x00]
  Power states: D0 D1 D2 D3 D3cold
  Power: setting=D0, actual=D0
  Connection: 4
     0x1a* 0x1b 0x1d 0x1e

[Raymond (superquad-vortex2)]

the pulseauio server mute the other input sources (e.g. int mic and dock mic) when ext mic is plugged . this mean dock mic and ext mic cannot share the volume control and switches at node 0x14

[Raymond (superquad-vortex2)]

temporary workaround is to change pulseaudio external mic conf file

[Element Dock Mic]
-switch = off
+switch = on
volume = off
-volume = on

[Raymond (superquad-vortex2)]

http://git.kernel.org/?p=linux/kernel/git/tiwai/sound.git;a=commitdiff;h=739572a545b8ab6faf9e266c3ed83ea202073699;hp=c10514394ef9e8de93a4ad8c8904d71dcd82c122

[Marcus Tomlinson (marcustomlinson)]

This release of Ubuntu is no longer receiving maintenance updates. If this is still an issue on a maintained version of Ubuntu please let us know.

[Launchpad Janitor (janitor)]

[Expired for alsa-driver (Ubuntu) because there has been no activity for 60 days.]