[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.24-22-generic (buildd@crested) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Mon Nov 24 19:35:06 UTC 2008 (Ubuntu 2.6.24-22.45-generic) [ 0.000000] Command line: root=UUID=a778d38a-2aa0-46a8-8b4c-30a137eb0e54 ro quiet splash [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000dfee0000 (usable) [ 0.000000] BIOS-e820: 00000000dfee0000 - 00000000dfee3000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000dfee3000 - 00000000dfef0000 (ACPI data) [ 0.000000] BIOS-e820: 00000000dfef0000 - 00000000dff00000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000120000000 (usable) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 917216) 1 entries of 3200 used [ 0.000000] Entering add_active_range(0, 1048576, 1179648) 2 entries of 3200 used [ 0.000000] end_pfn_map = 1179648 [ 0.000000] DMI 2.4 present. [ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000F7790 checksum 0 [ 0.000000] ACPI: RSDP 000F7790, 0024 (r2 Nvidia) [ 0.000000] ACPI: XSDT DFEE3100, 004C (r1 Nvidia ASUSACPI 42302E31 AWRD 0) [ 0.000000] ACPI: FACP DFEEAC80, 00F4 (r3 Nvidia ASUSACPI 42302E31 AWRD 0) [ 0.000000] ACPI: DSDT DFEE3280, 7985 (r1 NVIDIA AWRDACPI 1000 MSFT 3000000) [ 0.000000] ACPI: FACS DFEE0000, 0040 [ 0.000000] ACPI: SSDT DFEEAEC0, 0115 (r1 PTLTD POWERNOW 1 LTP 1) [ 0.000000] ACPI: HPET DFEEB040, 0038 (r1 Nvidia ASUSACPI 42302E31 AWRD 98) [ 0.000000] ACPI: MCFG DFEEB0C0, 003C (r1 Nvidia ASUSACPI 42302E31 AWRD 0) [ 0.000000] ACPI: APIC DFEEADC0, 0098 (r1 Nvidia ASUSACPI 42302E31 AWRD 0) [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] CPU has 1 num_cores [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000120000000 [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 917216) 1 entries of 3200 used [ 0.000000] Entering add_active_range(0, 1048576, 1179648) 2 entries of 3200 used [ 0.000000] Bootmem setup node 0 0000000000000000-0000000120000000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1179648 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0 -> 159 [ 0.000000] 0: 256 -> 917216 [ 0.000000] 0: 1048576 -> 1179648 [ 0.000000] On node 0 totalpages: 1048191 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1222 pages reserved [ 0.000000] DMA zone: 2721 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 898840 pages, LIFO batch:31 [ 0.000000] Normal zone: 1792 pages used for memmap [ 0.000000] Normal zone: 129280 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfefff000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000 [ 0.000000] swsusp: Registered nosave memory region: 00000000dfee0000 - 00000000dfee3000 [ 0.000000] swsusp: Registered nosave memory region: 00000000dfee3000 - 00000000dfef0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000dfef0000 - 00000000dff00000 [ 0.000000] swsusp: Registered nosave memory region: 00000000dff00000 - 00000000f0000000 [ 0.000000] swsusp: Registered nosave memory region: 00000000f0000000 - 00000000f4000000 [ 0.000000] swsusp: Registered nosave memory region: 00000000f4000000 - 00000000fec00000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fec00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at e0000000 (gap: dff00000:10100000) [ 0.000000] SMP: Allowing 4 CPUs, 3 hotplug CPUs [ 0.000000] PERCPU: Allocating 34656 bytes of per cpu data [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1030841 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: root=UUID=a778d38a-2aa0-46a8-8b4c-30a137eb0e54 ro quiet splash [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Extended CMOS year: 2000 [ 0.000000] hpet clockevent registered [ 0.000000] TSC calibrated against HPET [ 19.286204] time.c: Detected 2210.185 MHz processor. [ 19.287088] Console: colour VGA+ 80x25 [ 19.287091] console [tty0] enabled [ 19.287107] Checking aperture... [ 19.287109] CPU 0: aperture @ 4000000 size 32 MB [ 19.287111] Aperture too small (32 MB) [ 19.291778] No AGP bridge found [ 19.291779] Your BIOS doesn't leave a aperture memory hole [ 19.291781] Please enable the IOMMU option in the BIOS setup [ 19.291782] This costs you 64 MB of RAM [ 19.314930] Mapping aperture over 65536 KB of RAM @ 4000000 [ 19.314935] swsusp: Registered nosave memory region: 0000000004000000 - 0000000008000000 [ 19.345104] Memory: 4049948k/4718592k available (2490k kernel code, 142816k reserved, 1317k data, 320k init) [ 19.345133] SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=4, Nodes=1 [ 19.424097] Calibrating delay using timer specific routine.. 4423.70 BogoMIPS (lpj=8847409) [ 19.424122] Security Framework initialized [ 19.424127] SELinux: Disabled at boot. [ 19.424138] AppArmor: AppArmor initialized [ 19.424141] Failure registering capabilities with primary security module. [ 19.424415] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 19.426362] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 19.427300] Mount-cache hash table entries: 256 [ 19.427402] Initializing cgroup subsys ns [ 19.427405] Initializing cgroup subsys cpuacct [ 19.427416] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 19.427418] CPU: L2 Cache: 512K (64 bytes/line) [ 19.427420] CPU 0/0 -> Node 0 [ 19.427439] SMP alternatives: switching to UP code [ 19.427911] Early unpacking initramfs... done [ 19.707963] ACPI: Core revision 20070126 [ 19.708019] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 19.752601] Using local APIC timer interrupts. [ 19.797821] APIC timer calibration result 12557870 [ 19.797823] Detected 12.557 MHz APIC timer. [ 19.797860] Brought up 1 CPUs [ 19.797948] CPU0 attaching sched-domain: [ 19.797950] domain 0: span 01 [ 19.797952] groups: 01 [ 19.798077] net_namespace: 120 bytes [ 19.798426] Time: 16:37:56 Date: 12/07/08 [ 19.798450] NET: Registered protocol family 16 [ 19.798590] ACPI: bus type pci registered [ 19.798644] PCI: Using configuration type 1 [ 19.799987] ACPI: EC: Look up EC in DSDT [ 19.807249] ACPI: Interpreter enabled [ 19.807254] ACPI: (supports S0 S1 S3 S4 S5) [ 19.807268] ACPI: Using IOAPIC for interrupt routing [ 19.816412] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 19.816867] PCI: Transparent bridge - 0000:00:06.0 [ 19.816974] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 19.817289] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 19.856932] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 19.857113] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 19.857292] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 19.857470] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 19.857649] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 19.857832] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 *11 14 15) [ 19.858010] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 19.858189] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 19.858368] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 19.858549] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 19.858730] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 *10 11 14 15) [ 19.858909] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 *10 11 14 15) [ 19.859087] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 19.859266] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 19.859445] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 19.859623] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 19.859803] ACPI: PCI Interrupt Link [LSID] (IRQs *5 7 9 10 11 14 15) [ 19.859988] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 *10 11 14 15) [ 19.860171] ACPI: PCI Interrupt Link [LSA2] (IRQs 5 7 9 10 *11 14 15) [ 19.860388] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. [ 19.860597] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. [ 19.860806] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. [ 19.861011] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. [ 19.861216] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled. [ 19.861421] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0 [ 19.861626] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled. [ 19.861837] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled. [ 19.862042] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled. [ 19.862248] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0 [ 19.862453] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled. [ 19.862659] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0 [ 19.862864] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled. [ 19.863069] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled. [ 19.863275] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled. [ 19.863480] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. [ 19.863686] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 [ 19.863892] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0 [ 19.864097] ACPI: PCI Interrupt Link [ASA2] (IRQs 20 21 22 23) *0 [ 19.864211] Linux Plug and Play Support v0.97 (c) Adam Belay [ 19.864234] pnp: PnP ACPI init [ 19.864240] ACPI: bus type pnp registered [ 19.868834] pnpacpi: exceeded the max number of mem resources: 12 [ 19.868886] pnp: PnP ACPI: found 13 devices [ 19.868887] ACPI: ACPI bus type pnp unregistered [ 19.869063] PCI: Using ACPI for IRQ routing [ 19.869067] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 19.877802] NET: Registered protocol family 8 [ 19.877804] NET: Registered protocol family 20 [ 19.877860] PCI-DMA: Disabling AGP. [ 19.878086] PCI-DMA: aperture base @ 4000000 size 65536 KB [ 19.878089] PCI-DMA: using GART IOMMU. [ 19.878091] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 19.878222] hpet0: at MMIO 0xfefff000, IRQs 2, 8, 31 [ 19.878225] hpet0: 3 32-bit timers, 25000000 Hz [ 19.879269] AppArmor: AppArmor Filesystem Enabled [ 19.881775] Time: tsc clocksource has been installed. [ 19.881785] Switched to high resolution mode on CPU 0 [ 19.889773] system 00:01: ioport range 0x1000-0x107f has been reserved [ 19.889775] system 00:01: ioport range 0x1080-0x10ff has been reserved [ 19.889778] system 00:01: ioport range 0x1400-0x147f has been reserved [ 19.889780] system 00:01: ioport range 0x1480-0x14ff has been reserved [ 19.889782] system 00:01: ioport range 0x1800-0x187f has been reserved [ 19.889784] system 00:01: ioport range 0x1880-0x18ff has been reserved [ 19.889790] system 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 19.889792] system 00:02: ioport range 0x800-0x87f has been reserved [ 19.889794] system 00:02: ioport range 0x290-0x297 has been reserved [ 19.889804] system 00:0b: iomem range 0xf0000000-0xf3ffffff could not be reserved [ 19.889810] system 00:0c: iomem range 0xcf000-0xcffff has been reserved [ 19.889812] system 00:0c: iomem range 0xf0000-0xf7fff could not be reserved [ 19.889814] system 00:0c: iomem range 0xf8000-0xfbfff could not be reserved [ 19.889816] system 00:0c: iomem range 0xfc000-0xfffff could not be reserved [ 19.889820] system 00:0c: iomem range 0xfefff000-0xfefff0ff has been reserved [ 19.889822] system 00:0c: iomem range 0xdfee0000-0xdfefffff could not be reserved [ 19.889824] system 00:0c: iomem range 0xffff0000-0xffffffff has been reserved [ 19.889827] system 00:0c: iomem range 0x0-0x9ffff could not be reserved [ 19.889829] system 00:0c: iomem range 0x100000-0xdfedffff could not be reserved [ 19.889831] system 00:0c: iomem range 0xfec00000-0xfec00fff has been reserved [ 19.889833] system 00:0c: iomem range 0xfee00000-0xfeefffff could not be reserved [ 19.889836] system 00:0c: iomem range 0xfefff000-0xfeffffff could not be reserved [ 19.890138] PCI: Bridge: 0000:00:06.0 [ 19.890140] IO window: disabled. [ 19.890142] MEM window: disabled. [ 19.890144] PREFETCH window: disabled. [ 19.890146] PCI: Bridge: 0000:00:0f.0 [ 19.890148] IO window: a000-afff [ 19.890150] MEM window: fde00000-fdefffff [ 19.890152] PREFETCH window: e0000000-efffffff [ 19.890159] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 19.890169] PCI: Setting latency timer of device 0000:00:0f.0 to 64 [ 19.890178] NET: Registered protocol family 2 [ 19.925822] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 19.926828] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 19.930638] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 19.931120] TCP: Hash tables configured (established 524288 bind 65536) [ 19.931124] TCP reno registered [ 19.941829] checking if image is initramfs... it is [ 20.477321] Freeing initrd memory: 7543k freed [ 20.481270] audit: initializing netlink socket (disabled) [ 20.481280] audit(1228667877.156:1): initialized [ 20.482820] VFS: Disk quotas dquot_6.5.1 [ 20.482878] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 20.482976] io scheduler noop registered [ 20.482978] io scheduler anticipatory registered [ 20.482979] io scheduler deadline registered [ 20.483052] io scheduler cfq registered (default) [ 20.497512] pci 0000:00:05.0: Enabling HT MSI Mapping [ 20.497527] pci 0000:00:05.1: Enabling HT MSI Mapping [ 20.497540] pci 0000:00:05.2: Enabling HT MSI Mapping [ 20.497551] pci 0000:00:06.0: Enabling HT MSI Mapping [ 20.497564] pci 0000:00:06.1: Enabling HT MSI Mapping [ 20.497579] pci 0000:00:08.0: Enabling HT MSI Mapping [ 20.497591] pci 0000:00:0f.0: Enabling HT MSI Mapping [ 20.497598] Boot video device is 0000:02:00.0 [ 20.497721] PCI: Setting latency timer of device 0000:00:0f.0 to 64 [ 20.497738] assign_interrupt_mode Found MSI capability [ 20.497753] Allocate Port Service[0000:00:0f.0:pcie00] [ 20.518857] Real Time Clock Driver v1.12ac [ 20.519018] hpet_resources: 0xfefff000 is busy [ 20.519040] Linux agpgart interface v0.102 [ 20.519042] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 20.519149] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 20.519589] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 20.520116] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 20.520165] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 20.520231] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 20.520233] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 20.520314] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 20.525522] mice: PS/2 mouse device common for all mice [ 20.525550] cpuidle: using governor ladder [ 20.525552] cpuidle: using governor menu [ 20.525668] NET: Registered protocol family 1 [ 20.525746] registered taskstats version 1 [ 20.525843] Magic number: 4:839:640 [ 20.525949] /build/buildd/linux-2.6.24/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 20.525952] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 20.525954] EDD information not available. [ 20.525960] Freeing unused kernel memory: 320k freed [ 20.526214] Write protecting the kernel read-only data: 1036k [ 20.549303] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 21.690934] fuse init (API version 7.9) [ 21.701165] ACPI: Fan [FAN] (on) [ 21.705888] ACPI Exception (processor_core-0822): AE_NOT_FOUND, Processor Device is not present [20070126] [ 21.705898] ACPI Exception (processor_core-0822): AE_NOT_FOUND, Processor Device is not present [20070126] [ 21.705908] ACPI Exception (processor_core-0822): AE_NOT_FOUND, Processor Device is not present [20070126] [ 21.707314] ACPI: Thermal Zone [THRM] (40 C) [ 22.250678] usbcore: registered new interface driver usbfs [ 22.250695] usbcore: registered new interface driver hub [ 22.252370] usbcore: registered new device driver usb [ 22.260242] SCSI subsystem initialized [ 22.282017] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 22.282389] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23 [ 22.282398] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 23 (level, low) -> IRQ 23 [ 22.282466] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 22.282471] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 22.282663] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 [ 22.282689] ohci_hcd 0000:00:02.0: irq 23, io mem 0xfe02f000 [ 22.298757] libata version 3.00 loaded. [ 22.338146] usb usb1: configuration #1 chosen from 1 choice [ 22.338167] hub 1-0:1.0: USB hub found [ 22.338175] hub 1-0:1.0: 10 ports detected [ 22.440462] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22 [ 22.440471] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 22 (level, low) -> IRQ 22 [ 22.440535] PCI: Setting latency timer of device 0000:00:02.1 to 64 [ 22.440540] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 22.440583] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2 [ 22.440609] ehci_hcd 0000:00:02.1: debug port 1 [ 22.440611] PCI: cache line size of 64 is not supported by device 0000:00:02.1 [ 22.440624] ehci_hcd 0000:00:02.1: irq 22, io mem 0xfe02e000 [ 22.451934] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 22.452026] usb usb2: configuration #1 chosen from 1 choice [ 22.452044] hub 2-0:1.0: USB hub found [ 22.452051] hub 2-0:1.0: 10 ports detected [ 22.556015] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61. [ 22.556370] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 21 [ 22.556379] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APCH] -> GSI 21 (level, low) -> IRQ 21 [ 22.556384] PCI: Setting latency timer of device 0000:00:08.0 to 64 [ 23.075863] forcedeth 0000:00:08.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:17:31:c4:00:68 [ 23.075867] forcedeth 0000:00:08.0: highdma csum vlan pwrctl mgmt timirq gbit lnktim msi desc-v3 [ 23.076193] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 23.076547] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 20 [ 23.076556] ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [APSI] -> GSI 20 (level, low) -> IRQ 20 [ 23.076570] PCI: Setting latency timer of device 0000:00:05.0 to 64 [ 23.076576] ACPI: PCI interrupt for device 0000:00:05.0 disabled [ 23.076878] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 23 [ 23.076880] ACPI: PCI Interrupt 0000:00:05.1[B] -> Link [APSJ] -> GSI 23 (level, low) -> IRQ 23 [ 23.076894] PCI: Setting latency timer of device 0000:00:05.1 to 64 [ 23.076899] ACPI: PCI interrupt for device 0000:00:05.1 disabled [ 23.077201] ACPI: PCI Interrupt Link [ASA2] enabled at IRQ 22 [ 23.077203] ACPI: PCI Interrupt 0000:00:05.2[C] -> Link [ASA2] -> GSI 22 (level, low) -> IRQ 22 [ 23.077217] PCI: Setting latency timer of device 0000:00:05.2 to 64 [ 23.077222] ACPI: PCI interrupt for device 0000:00:05.2 disabled [ 23.078660] sata_nv 0000:00:05.0: version 3.5 [ 23.078666] ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [APSI] -> GSI 20 (level, low) -> IRQ 20 [ 23.078746] PCI: Setting latency timer of device 0000:00:05.0 to 64 [ 23.079893] scsi0 : sata_nv [ 23.080470] scsi1 : sata_nv [ 23.080643] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xdc00 irq 20 [ 23.080645] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xdc08 irq 20 [ 23.519139] usb 2-9: new high speed USB device using ehci_hcd and address 4 [ 23.547125] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 23.556181] ata1.00: ATA-7: Maxtor 6V300F0, VA111630, max UDMA/133 [ 23.556184] ata1.00: 586114704 sectors, multi 1: LBA48 NCQ (depth 0/32) [ 23.572175] ata1.00: configured for UDMA/133 [ 23.653900] usb 2-9: configuration #1 chosen from 1 choice [ 23.882873] ata2: SATA link down (SStatus 0 SControl 300) [ 23.893229] scsi 0:0:0:0: Direct-Access ATA Maxtor 6V300F0 VA11 PQ: 0 ANSI: 5 [ 23.893288] ACPI: PCI Interrupt 0000:00:05.1[B] -> Link [APSJ] -> GSI 23 (level, low) -> IRQ 23 [ 23.893383] PCI: Setting latency timer of device 0000:00:05.1 to 64 [ 23.893757] scsi2 : sata_nv [ 23.893913] scsi3 : sata_nv [ 23.894071] ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc800 irq 23 [ 23.894074] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc808 irq 23 [ 23.954823] usb 1-3: new low speed USB device using ohci_hcd and address 2 [ 24.169893] usb 1-3: configuration #1 chosen from 1 choice [ 24.202649] ata3: SATA link down (SStatus 0 SControl 300) [ 24.474445] usb 1-4: new full speed USB device using ohci_hcd and address 3 [ 24.522418] ata4: SATA link down (SStatus 0 SControl 300) [ 24.532723] ACPI: PCI Interrupt 0000:00:05.2[C] -> Link [ASA2] -> GSI 22 (level, low) -> IRQ 22 [ 24.532822] PCI: Setting latency timer of device 0000:00:05.2 to 64 [ 24.532895] scsi4 : sata_nv [ 24.533148] scsi5 : sata_nv [ 24.533305] ata5: SATA max UDMA/133 cmd 0xc400 ctl 0xc000 bmdma 0xb400 irq 22 [ 24.533308] ata6: SATA max UDMA/133 cmd 0xbc00 ctl 0xb800 bmdma 0xb408 irq 22 [ 24.686546] usb 1-4: configuration #1 chosen from 1 choice [ 24.694328] usbcore: registered new interface driver libusual [ 24.694409] usbcore: registered new interface driver hiddev [ 24.699345] Initializing USB Mass Storage driver... [ 24.700622] input: Microsoft Microsoft Basic Optical Mouse v2.0 as /devices/pci0000:00/0000:00:02.0/usb1/1-3/1-3:1.0/input/input2 [ 24.706356] input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft Basic Optical Mouse v2.0 ] on usb-0000:00:02.0-3 [ 24.706388] scsi6 : SCSI emulation for USB Mass Storage devices [ 24.711128] usb-storage: device found at 4 [ 24.711131] usb-storage: waiting for device to settle before scanning [ 24.713526] input: Burr-Brown from TI USB Audio DAC as /devices/pci0000:00/0000:00:02.0/usb1/1-4/1-4:1.2/input/input3 [ 24.726313] input,hidraw1: USB HID v1.00 Device [Burr-Brown from TI USB Audio DAC ] on usb-0000:00:02.0-4 [ 24.726329] usbcore: registered new interface driver usbhid [ 24.726332] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 24.726642] usbcore: registered new interface driver usb-storage [ 24.726645] USB Mass Storage support registered. [ 24.842175] ata5: SATA link down (SStatus 0 SControl 300) [ 25.161945] ata6: SATA link down (SStatus 0 SControl 300) [ 25.173826] pata_amd 0000:00:04.0: version 0.3.10 [ 25.173861] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 25.176301] scsi7 : pata_amd [ 25.176574] scsi8 : pata_amd [ 25.177104] ata7: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 25.177107] ata8: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 25.493987] ata7.00: ATAPI: ASUS DRW-1608P2S, 1.41, max UDMA/66 [ 25.665801] ata7.00: configured for UDMA/66 [ 25.665830] ata8: port disabled. ignoring. [ 25.672460] scsi 7:0:0:0: CD-ROM ASUS DRW-1608P2S 1.41 PQ: 0 ANSI: 5 [ 25.678707] Driver 'sd' needs updating - please use bus_type methods [ 25.678777] sd 0:0:0:0: [sda] 586114704 512-byte hardware sectors (300091 MB) [ 25.678786] sd 0:0:0:0: [sda] Write Protect is off [ 25.678788] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 25.678800] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 25.678834] sd 0:0:0:0: [sda] 586114704 512-byte hardware sectors (300091 MB) [ 25.678841] sd 0:0:0:0: [sda] Write Protect is off [ 25.678843] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 25.678853] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 25.678857] sda:<4>Driver 'sr' needs updating - please use bus_type methods [ 25.700142] sda1 sda2 < sda5 sda6 sda7 sda8 sda9 > [ 25.762959] sd 0:0:0:0: [sda] Attached SCSI disk [ 25.767572] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 25.767590] sr 7:0:0:0: Attached scsi generic sg1 type 5 [ 25.782579] sr0: scsi3-mmc drive: 94x/94x writer dvd-ram cd/rw xa/form2 cdda tray [ 25.782584] Uniform CD-ROM driver Revision: 3.20 [ 25.782624] sr 7:0:0:0: Attached scsi CD-ROM sr0 [ 26.127025] Attempting manual resume [ 26.127028] swsusp: Resume From Partition 8:7 [ 26.127030] PM: Checking swsusp image. [ 26.127255] PM: Resume from disk failed. [ 26.133126] ReiserFS: sda8: found reiserfs format "3.6" with standard journal [ 26.133136] ReiserFS: sda8: using ordered data mode [ 26.146651] ReiserFS: sda8: journal params: device sda8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 26.147498] ReiserFS: sda8: checking transaction log (sda8) [ 27.103853] ReiserFS: sda8: replayed 33 transactions in 1 seconds [ 27.103994] ReiserFS: sda8: Using r5 hash to sort names [ 29.706810] usb-storage: device scan complete [ 29.708302] scsi 6:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0 [ 29.710049] scsi 6:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0 [ 29.712048] scsi 6:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0 [ 29.714046] scsi 6:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0 [ 29.718067] sd 6:0:0:0: [sdb] Attached SCSI removable disk [ 29.718091] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 29.722057] sd 6:0:0:1: [sdc] Attached SCSI removable disk [ 29.722080] sd 6:0:0:1: Attached scsi generic sg3 type 0 [ 29.726057] sd 6:0:0:2: [sdd] Attached SCSI removable disk [ 29.726077] sd 6:0:0:2: Attached scsi generic sg4 type 0 [ 29.730057] sd 6:0:0:3: [sde] Attached SCSI removable disk [ 29.730080] sd 6:0:0:3: Attached scsi generic sg5 type 0 [ 32.975750] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00 [ 32.975773] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x1c40 [ 33.076261] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 33.108239] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 33.464015] input: Power Button (FF) as /devices/virtual/input/input4 [ 33.475940] ACPI: Power Button (FF) [PWRF] [ 33.476003] input: Power Button (CM) as /devices/virtual/input/input5 [ 33.487909] ACPI: Power Button (CM) [PWRB] [ 33.756885] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [ 33.923626] [fglrx] Maximum main memory to use for locked dma buffers: 3800 MBytes. [ 33.923653] [fglrx] ASYNCIO init succeed! [ 33.923743] [fglrx] PAT is enabled successfully! [ 33.924883] [fglrx] module loaded - fglrx 8.47.3 [Feb 25 2008] on minor 0 [ 34.299426] NET: Registered protocol family 10 [ 34.299622] lo: Disabled Privacy Extensions [ 34.411644] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 21 [ 34.411648] ACPI: PCI Interrupt 0000:00:06.1[B] -> Link [AAZA] -> GSI 21 (level, low) -> IRQ 21 [ 34.411726] PCI: Setting latency timer of device 0000:00:06.1 to 64 [ 35.107754] usbcore: registered new interface driver snd-usb-audio [ 35.127178] input: PC Speaker as /devices/platform/pcspkr/input/input6 [ 35.611469] parport_pc 00:09: reported by Plug and Play ACPI [ 35.611495] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] [ 37.144505] loop: module loaded [ 37.161436] lp0: using parport0 (interrupt-driven). [ 37.221251] Adding 2104472k swap on /dev/sda7. Priority:-1 extents:1 across:2104472k [ 44.112448] ReiserFS: sda8: Removing [2 3362 0x0 SD]..done [ 44.112488] ReiserFS: sda8: There were 1 uncompleted unlinks/truncates. Completed [ 45.055504] eth0: no IPv6 routers present [ 51.861779] ReiserFS: sda6: found reiserfs format "3.6" with standard journal [ 51.861789] ReiserFS: sda6: using ordered data mode [ 51.872499] ReiserFS: sda6: journal params: device sda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 51.873344] ReiserFS: sda6: checking transaction log (sda6) [ 51.915176] ReiserFS: sda6: Using r5 hash to sort names [ 52.239719] ip_tables: (C) 2000-2006 Netfilter Core Team [ 52.549669] No dock devices found. [ 52.819685] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3500+ processors (1 cpu cores) (version 2.20.00) [ 52.819717] powernow-k8: 0 : fid 0xe (2200 MHz), vid 0x8 [ 52.819719] powernow-k8: 1 : fid 0xc (2000 MHz), vid 0xa [ 52.819721] powernow-k8: 2 : fid 0xa (1800 MHz), vid 0xc [ 52.819722] powernow-k8: 3 : fid 0x2 (1000 MHz), vid 0x12 [ 53.694004] ppdev: user-space parallel port driver [ 53.810863] audit(1228696710.739:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5323 profile="/usr/sbin/cupsd" namespace="default" [ 54.956544] Marking TSC unstable due to cpufreq changes [ 54.960905] Time: hpet clocksource has been installed. [ 55.643960] Clocksource tsc unstable (delta = -90907694 ns) [ 55.746782] Bluetooth: Core ver 2.11 [ 55.747213] NET: Registered protocol family 31 [ 55.747216] Bluetooth: HCI device and connection manager initialized [ 55.747219] Bluetooth: HCI socket layer initialized [ 55.778882] Bluetooth: L2CAP ver 2.9 [ 55.778885] Bluetooth: L2CAP socket layer initialized [ 55.807578] Bluetooth: RFCOMM socket layer initialized [ 55.807592] Bluetooth: RFCOMM TTY layer initialized [ 55.807594] Bluetooth: RFCOMM ver 1.8 [ 56.779041] ACPI: PCI Interrupt Link [APC6] enabled at IRQ 16 [ 56.779052] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [APC6] -> GSI 16 (level, low) -> IRQ 16 [ 57.420762] [fglrx] Reserve Block - 0 offset = 0X7ffb000 length = 0X5000 [ 57.420768] [fglrx] Reserve Block - 1 offset = 0X0 length = 0X1000000 [ 57.420771] [fglrx] Reserve Block - 2 offset = 0Xffff000 length = 0X1000 [ 57.420773] [fglrx] Reserve Block - 3 offset = 0Xffbf000 length = 0X40000 [ 57.454577] [fglrx] interrupt source 20008000 successfully enabled [ 57.454582] [fglrx] enable ID = 0x00000008 [ 57.454805] [fglrx] Receive enable interrupt message with irqEnableMask: 20008000 [ 69.445001] UDF-fs: Partition marked readonly; forcing readonly mount [ 69.486498] UDF-fs INFO UDF 0.9.8.1 (2004/29/09) Mounting volume 'GusiLebedi', timestamp 2007/08/14 20:06 (1e20)