Dumping 124 device(s) from the Global Device List: ------------------------------------------------- udi = '/org/freedesktop/Hal/devices/computer' info.addons = {'hald-addon-cpufreq', 'hald-addon-acpi'} (string list) info.callouts.add = {'hal-acl-tool --remove-all', 'hal-storage-cleanup-all-mountpoints'} (string list) info.callouts.session_active = {'hal-acl-tool --reconfigure'} (string list) info.callouts.session_add = {'hal-acl-tool --reconfigure'} (string list) info.callouts.session_inactive = {'hal-acl-tool --reconfigure'} (string list) info.callouts.session_remove = {'hal-acl-tool --reconfigure'} (string list) info.capabilities = {'cpufreq_control'} (string list) info.interfaces = {'org.freedesktop.Hal.Device.SystemPowerManagement', 'org.freedesktop.Hal.Device.CPUFreq'} (string list) info.product = 'Computer' (string) info.subsystem = 'unknown' (string) info.udi = '/org/freedesktop/Hal/devices/computer' (string) org.freedesktop.Hal.Device.SystemPowerManagement.method_argnames = {'num_seconds_to_sleep', 'num_seconds_to_sleep', '', '', '', 'enable_power_save'} (string list) org.freedesktop.Hal.Device.SystemPowerManagement.method_execpaths = {'hal-system-power-suspend', 'hal-system-power-suspend-hybrid', 'hal-system-power-hibernate', 'hal-system-power-shutdown', 'hal-system-power-reboot', 'hal-system-power-set-power-save'} (string list) org.freedesktop.Hal.Device.SystemPowerManagement.method_names = {'Suspend', 'SuspendHybrid', 'Hibernate', 'Shutdown', 'Reboot', 'SetPowerSave'} (string list) org.freedesktop.Hal.Device.SystemPowerManagement.method_signatures = {'i', 'i', '', '', '', 'b'} (string list) power_management.acpi.linux.version = '20080609' (string) power_management.can_hibernate = true (bool) power_management.can_suspend = true (bool) power_management.can_suspend_hybrid = false (bool) power_management.is_powersave_set = true (bool) power_management.type = 'acpi' (string) system.chassis.manufacturer = 'Sony Corporation' (string) system.chassis.type = 'Notebook' (string) system.firmware.release_date = '08/13/2008' (string) system.firmware.vendor = 'INSYDE' (string) system.firmware.version = 'R0290Q1' (string) system.formfactor = 'laptop' (string) system.hardware.primary_video.product = 10818 (0x2a42) (int) system.hardware.primary_video.vendor = 32902 (0x8086) (int) system.hardware.product = 'VGN-BZ12XN' (string) system.hardware.serial = '28277356-5000300' (string) system.hardware.uuid = 'F7AB2840-C055-11DC-8194-001A80E17325' (string) system.hardware.vendor = 'Sony Corporation' (string) system.hardware.version = 'C102QZ98' (string) system.kernel.machine = 'i686' (string) system.kernel.name = 'Linux' (string) system.kernel.version = '2.6.27-9-generic' (string) udi = '/org/freedesktop/Hal/devices/acpi_CPU0' info.capabilities = {'processor'} (string list) info.category = 'processor' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz' (string) info.udi = '/org/freedesktop/Hal/devices/acpi_CPU0' (string) linux.acpi_path = '/proc/acpi/processor/CPU0' (string) linux.acpi_type = 1 (0x1) (int) linux.hotplug_type = 4 (0x4) (int) processor.can_throttle = true (bool) processor.number = 0 (0x0) (int) udi = '/org/freedesktop/Hal/devices/acpi_CPU1' info.capabilities = {'processor'} (string list) info.category = 'processor' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz' (string) info.udi = '/org/freedesktop/Hal/devices/acpi_CPU1' (string) linux.acpi_path = '/proc/acpi/processor/CPU1' (string) linux.acpi_type = 1 (0x1) (int) linux.hotplug_type = 4 (0x4) (int) processor.can_throttle = true (bool) processor.number = 1 (0x1) (int) udi = '/org/freedesktop/Hal/devices/computer_alsa_timer' access_control.file = '/dev/snd/timer' (string) access_control.type = 'sound' (string) alsa.device_file = '/dev/snd/timer' (string) alsa.type = 'timer' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'alsa', 'access_control'} (string list) info.category = 'alsa' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'ALSA Timer Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/computer_alsa_timer' (string) linux.device_file = '/dev/snd/timer' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/virtual/sound/timer' (string) udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer_0' access_control.file = '/dev/sequencer2' (string) access_control.type = 'sound' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'oss', 'access_control'} (string list) info.category = 'oss' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'OSS Sequencer Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer_0' (string) linux.device_file = '/dev/sequencer2' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/virtual/sound/sequencer2' (string) oss.device_file = '/dev/sequencer2' (string) oss.type = 'sequencer' (string) udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer' access_control.file = '/dev/sequencer' (string) access_control.type = 'sound' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'oss', 'access_control'} (string list) info.category = 'oss' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'OSS Sequencer Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer' (string) linux.device_file = '/dev/sequencer' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/virtual/sound/sequencer' (string) oss.device_file = '/dev/sequencer' (string) oss.type = 'sequencer' (string) udi = '/org/freedesktop/Hal/devices/computer_alsa_sequencer' access_control.file = '/dev/snd/seq' (string) access_control.type = 'sound' (string) alsa.device_file = '/dev/snd/seq' (string) alsa.type = 'sequencer' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'alsa', 'access_control'} (string list) info.category = 'alsa' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'ALSA Sequencer Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/computer_alsa_sequencer' (string) linux.device_file = '/dev/snd/seq' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/virtual/sound/seq' (string) udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_5' button.has_state = false (bool) info.addons.singleton = {'hald-addon-input'} (string list) info.capabilities = {'input', 'button'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Sony Vaio Jogdial' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_5' (string) input.device = '/dev/input/event8' (string) input.product = 'Sony Vaio Jogdial' (string) linux.device_file = '/dev/input/event8' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/virtual/input/input8/event8' (string) udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_4' info.capabilities = {'input', 'input.mouse'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Macintosh mouse button emulation' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_4' (string) input.device = '/dev/input/event0' (string) input.product = 'Macintosh mouse button emulation' (string) input.x11_driver = 'evdev' (string) linux.device_file = '/dev/input/event0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/virtual/input/input0/event0' (string) udi = '/org/freedesktop/Hal/devices/computer_backlight_0' info.capabilities = {'laptop_panel'} (string list) info.category = 'laptop_panel' (string) info.interfaces = {'org.freedesktop.Hal.Device.LaptopPanel'} (string list) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Generic Backlight Device' (string) info.subsystem = 'backlight' (string) info.udi = '/org/freedesktop/Hal/devices/computer_backlight_0' (string) laptop_panel.access_method = 'general' (string) laptop_panel.num_levels = 8 (0x8) (int) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'backlight' (string) linux.sysfs_path = '/sys/devices/virtual/backlight/sony' (string) org.freedesktop.Hal.Device.LaptopPanel.method_argnames = {'brightness_value', ''} (string list) org.freedesktop.Hal.Device.LaptopPanel.method_execpaths = {'hal-system-lcd-set-brightness', 'hal-system-lcd-get-brightness'} (string list) org.freedesktop.Hal.Device.LaptopPanel.method_names = {'SetBrightness', 'GetBrightness'} (string list) org.freedesktop.Hal.Device.LaptopPanel.method_signatures = {'i', ''} (string list) udi = '/org/freedesktop/Hal/devices/computer_backlight' info.capabilities = {'laptop_panel'} (string list) info.category = 'laptop_panel' (string) info.interfaces = {'org.freedesktop.Hal.Device.LaptopPanel'} (string list) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Generic Backlight Device' (string) info.subsystem = 'backlight' (string) info.udi = '/org/freedesktop/Hal/devices/computer_backlight' (string) laptop_panel.access_method = 'general' (string) laptop_panel.brightness_in_hardware = false (bool) laptop_panel.num_levels = 9 (0x9) (int) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'backlight' (string) linux.sysfs_path = '/sys/devices/virtual/backlight/acpi_video0' (string) org.freedesktop.Hal.Device.LaptopPanel.method_argnames = {'brightness_value', ''} (string list) org.freedesktop.Hal.Device.LaptopPanel.method_execpaths = {'hal-system-lcd-set-brightness', 'hal-system-lcd-get-brightness'} (string list) org.freedesktop.Hal.Device.LaptopPanel.method_names = {'SetBrightness', 'GetBrightness'} (string list) org.freedesktop.Hal.Device.LaptopPanel.method_signatures = {'i', ''} (string list) udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_3' button.has_state = true (bool) button.state.value = true (bool) button.type = 'lid' (string) info.addons.singleton = {'hald-addon-input'} (string list) info.capabilities = {'input', 'input.switch', 'button'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Lid Switch' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_3' (string) input.device = '/dev/input/event5' (string) input.product = 'Lid Switch' (string) linux.device_file = '/dev/input/event5' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input5/event5' (string) udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_2' button.has_state = false (bool) button.type = 'power' (string) info.addons.singleton = {'hald-addon-input'} (string list) info.capabilities = {'input', 'button'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Power Button (CM)' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_2' (string) input.device = '/dev/input/event4' (string) input.product = 'Power Button (CM)' (string) linux.device_file = '/dev/input/event4' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4/event4' (string) udi = '/org/freedesktop/Hal/devices/computer_power_supply_battery_BAT1' battery.charge_level.current = 30790 (0x7846) (int) battery.charge_level.design = 54830 (0xd62e) (int) battery.charge_level.last_full = 54830 (0xd62e) (int) battery.charge_level.percentage = 56 (0x38) (int) battery.charge_level.rate = 16370 (0x3ff2) (int) battery.is_rechargeable = true (bool) battery.model = 'VGP-BPS13A' (string) battery.present = true (bool) battery.rechargeable.is_charging = false (bool) battery.rechargeable.is_discharging = true (bool) battery.remaining_time = 6771 (0x1a73) (int) battery.reporting.current = 30790 (0x7846) (int) battery.reporting.design = 54830 (0xd62e) (int) battery.reporting.last_full = 54830 (0xd62e) (int) battery.reporting.rate = 16370 (0x3ff2) (int) battery.reporting.technology = 'Li-ion' (string) battery.reporting.unit = 'mWh' (string) battery.serial = '5128' (string) battery.technology = 'lithium-ion' (string) battery.type = 'primary' (string) battery.vendor = 'Sony Corp.' (string) battery.voltage.current = 3541 (0xdd5) (int) battery.voltage.design = 11100 (0x2b5c) (int) battery.voltage.unit = 'mV' (string) info.capabilities = {'battery'} (string list) info.category = 'battery' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'VGP-BPS13A' (string) info.subsystem = 'power_supply' (string) info.udi = '/org/freedesktop/Hal/devices/computer_power_supply_battery_BAT1' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'power_supply' (string) linux.sysfs_path = '/sys/devices/LNXSYSTM:00/device:00/PNP0C0A:00/power_supply/BAT1' (string) udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_1' info.addons.singleton = {'hald-addon-input'} (string list) info.callouts.add = {'hal-setup-keymap', 'debian-setup-keyboard'} (string list) info.capabilities = {'input', 'input.keys', 'input.keymap', 'button'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Sony Vaio Keys' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_1' (string) input.device = '/dev/input/event7' (string) input.keymap.data = {'0x06:mute', '0x07:volumedown', '0x08:volumeup', '0x09:brightnessdown', '0x0a:brightnessup', '0x0b:switchvideomode', '0x0e:zoom', '0x10:suspend'} (string list) input.product = 'Sony Vaio Keys' (string) input.x11_driver = 'evdev' (string) input.xkb.layout = 'us' (string) input.xkb.model = 'pc105' (string) input.xkb.options = 'lv3:ralt_switch' (string) input.xkb.rules = 'evdev' (string) input.xkb.variant = 'intl' (string) linux.device_file = '/dev/input/event7' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0a/SNY5001:00/input/input7/event7' (string) udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_0' info.addons.singleton = {'hald-addon-input'} (string list) info.callouts.add = {'debian-setup-keyboard'} (string list) info.capabilities = {'input', 'input.keys', 'button'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Video Bus' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_0' (string) input.device = '/dev/input/event6' (string) input.product = 'Video Bus' (string) input.x11_driver = 'evdev' (string) input.xkb.layout = 'us' (string) input.xkb.model = 'pc105' (string) input.xkb.options = 'lv3:ralt_switch' (string) input.xkb.rules = 'evdev' (string) input.xkb.variant = 'intl' (string) linux.device_file = '/dev/input/event6' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/input/input6/event6' (string) udi = '/org/freedesktop/Hal/devices/computer_power_supply_ac_adapter_AC' ac_adapter.present = false (bool) info.capabilities = {'ac_adapter'} (string list) info.category = 'ac_adapter' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Generic AC Adapter Device' (string) info.subsystem = 'power_supply' (string) info.udi = '/org/freedesktop/Hal/devices/computer_power_supply_ac_adapter_AC' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'power_supply' (string) linux.sysfs_path = '/sys/devices/LNXSYSTM:00/device:00/ACPI0003:00/power_supply/AC' (string) udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input' button.has_state = false (bool) button.type = 'power' (string) info.addons.singleton = {'hald-addon-input'} (string list) info.capabilities = {'input', 'button'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Power Button (FF)' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input' (string) input.device = '/dev/input/event3' (string) input.product = 'Power Button (FF)' (string) linux.device_file = '/dev/input/event3' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3' (string) udi = '/org/freedesktop/Hal/devices/pnp_IFX0102' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'PnP Device (IFX0102)' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_IFX0102' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:08' (string) pnp.id = 'IFX0102' (string) udi = '/org/freedesktop/Hal/devices/pnp_SNY9008' info.linux.driver = 'i8042 aux' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'PnP Device (SNY9008)' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_SNY9008' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:07' (string) pnp.id = 'SNY9008' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0303' info.linux.driver = 'i8042 kbd' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'IBM Enhanced (101/102-key, PS/2 mouse support)' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0303' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:06' (string) pnp.description = 'IBM Enhanced (101/102-key, PS/2 mouse support)' (string) pnp.id = 'PNP0303' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0c04' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Math Coprocessor' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c04' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:05' (string) pnp.description = 'Math Coprocessor' (string) pnp.id = 'PNP0c04' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0103' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'PnP Device (PNP0103)' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0103' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:04' (string) pnp.id = 'PNP0103' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0b00' info.linux.driver = 'rtc_cmos' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'AT Real-Time Clock' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0b00' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:03' (string) pnp.description = 'AT Real-Time Clock' (string) pnp.id = 'PNP0b00' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0200' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'AT DMA Controller' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0200' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:02' (string) pnp.description = 'AT DMA Controller' (string) pnp.id = 'PNP0200' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02' info.linux.driver = 'system' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:01' (string) pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string) pnp.id = 'PNP0c02' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0a08' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'PnP Device (PNP0a08)' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0a08' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:00' (string) pnp.id = 'PNP0a08' (string) udi = '/org/freedesktop/Hal/devices/platform_sony_laptop' info.linux.driver = 'sony-laptop' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Platform Device (sony-laptop)' (string) info.subsystem = 'platform' (string) info.udi = '/org/freedesktop/Hal/devices/platform_sony_laptop' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'platform' (string) linux.sysfs_path = '/sys/devices/platform/sony-laptop' (string) platform.id = 'sony-laptop' (string) udi = '/org/freedesktop/Hal/devices/platform_serial8250' info.linux.driver = 'serial8250' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Platform Device (serial8250)' (string) info.subsystem = 'platform' (string) info.udi = '/org/freedesktop/Hal/devices/platform_serial8250' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'platform' (string) linux.sysfs_path = '/sys/devices/platform/serial8250' (string) platform.id = 'serial8250' (string) udi = '/org/freedesktop/Hal/devices/platform_pcspkr' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Platform Device (pcspkr)' (string) info.subsystem = 'platform' (string) info.udi = '/org/freedesktop/Hal/devices/platform_pcspkr' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'platform' (string) linux.sysfs_path = '/sys/devices/platform/pcspkr' (string) platform.id = 'pcspkr' (string) udi = '/org/freedesktop/Hal/devices/platform_i8042' info.linux.driver = 'i8042' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Platform Device (i8042)' (string) info.subsystem = 'platform' (string) info.udi = '/org/freedesktop/Hal/devices/platform_i8042' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'platform' (string) linux.sysfs_path = '/sys/devices/platform/i8042' (string) platform.id = 'i8042' (string) udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port' info.linux.driver = 'psmouse' (string) info.parent = '/org/freedesktop/Hal/devices/platform_i8042' (string) info.product = 'i8042 AUX port' (string) info.subsystem = 'serio' (string) info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'serio' (string) linux.sysfs_path = '/sys/devices/platform/i8042/serio1' (string) serio.description = 'i8042 AUX port' (string) serio.id = 'serio1' (string) udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port_logicaldev_input' info.capabilities = {'input', 'input.touchpad'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port' (string) info.product = 'SynPS/2 Synaptics TouchPad' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port_logicaldev_input' (string) input.device = '/dev/input/event10' (string) input.originating_device = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port' (string) input.product = 'SynPS/2 Synaptics TouchPad' (string) input.x11_driver = 'synaptics' (string) linux.device_file = '/dev/input/event10' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/platform/i8042/serio1/input/input10/event10' (string) udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port' info.linux.driver = 'atkbd' (string) info.parent = '/org/freedesktop/Hal/devices/platform_i8042' (string) info.product = 'i8042 KBD port' (string) info.subsystem = 'serio' (string) info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'serio' (string) linux.sysfs_path = '/sys/devices/platform/i8042/serio0' (string) serio.description = 'i8042 KBD port' (string) serio.id = 'serio0' (string) udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port_logicaldev_input' info.addons.singleton = {'hald-addon-input'} (string list) info.callouts.add = {'debian-setup-keyboard'} (string list) info.capabilities = {'input', 'input.keyboard', 'input.keypad', 'input.keys', 'button'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port' (string) info.product = 'AT Translated Set 2 keyboard' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port_logicaldev_input' (string) input.device = '/dev/input/event1' (string) input.originating_device = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port' (string) input.product = 'AT Translated Set 2 keyboard' (string) input.x11_driver = 'evdev' (string) input.xkb.layout = 'us' (string) input.xkb.model = 'pc105' (string) input.xkb.options = 'lv3:ralt_switch' (string) input.xkb.rules = 'evdev' (string) input.xkb.variant = 'intl' (string) linux.device_file = '/dev/input/event1' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/platform/i8042/serio0/input/input1/event1' (string) udi = '/org/freedesktop/Hal/devices/platform_eisa_0' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Platform Device (eisa.0)' (string) info.subsystem = 'platform' (string) info.udi = '/org/freedesktop/Hal/devices/platform_eisa_0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'platform' (string) linux.sysfs_path = '/sys/devices/platform/eisa.0' (string) platform.id = 'eisa.0' (string) udi = '/org/freedesktop/Hal/devices/platform_dock_0' info.docked = false (bool) info.interfaces = {'org.freedesktop.Hal.Device.DockStation'} (string list) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Platform Device (dock.0)' (string) info.subsystem = 'platform' (string) info.udi = '/org/freedesktop/Hal/devices/platform_dock_0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'platform' (string) linux.sysfs_path = '/sys/devices/platform/dock.0' (string) org.freedesktop.Hal.Device.DockStation.method_argnames = {''} (string list) org.freedesktop.Hal.Device.DockStation.method_execpaths = {'hal-dockstation-undock'} (string list) org.freedesktop.Hal.Device.DockStation.method_names = {'Undock'} (string list) org.freedesktop.Hal.Device.DockStation.method_signatures = {''} (string list) platform.id = 'dock.0' (string) udi = '/org/freedesktop/Hal/devices/pci_8086_292d' info.linux.driver = 'ata_piix' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'ICH9M/M-E 2 port SATA IDE Controller' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_292d' (string) info.vendor = 'Intel Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.5' (string) pci.device_class = 1 (0x1) (int) pci.device_protocol = 133 (0x85) (int) pci.device_subclass = 1 (0x1) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.5' (string) pci.product = 'ICH9M/M-E 2 port SATA IDE Controller' (string) pci.product_id = 10541 (0x292d) (int) pci.subsys_product_id = 36923 (0x903b) (int) pci.subsys_vendor = 'Sony Corporation' (string) pci.subsys_vendor_id = 4173 (0x104d) (int) pci.vendor = 'Intel Corporation' (string) pci.vendor_id = 32902 (0x8086) (int) udi = '/org/freedesktop/Hal/devices/pci_8086_292d_scsi_host_0' info.capabilities = {'scsi_host'} (string list) info.category = 'scsi_host' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_292d' (string) info.product = 'SCSI Host Adapter' (string) info.subsystem = 'scsi_host' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_292d_scsi_host_0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_host' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.5/host3/scsi_host/host3' (string) scsi_host.host = 3 (0x3) (int) udi = '/org/freedesktop/Hal/devices/pci_8086_292d_scsi_host' info.capabilities = {'scsi_host'} (string list) info.category = 'scsi_host' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_292d' (string) info.product = 'SCSI Host Adapter' (string) info.subsystem = 'scsi_host' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_292d_scsi_host' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_host' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.5/host2/scsi_host/host2' (string) scsi_host.host = 2 (0x2) (int) udi = '/org/freedesktop/Hal/devices/pci_8086_2930' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = '82801I (ICH9 Family) SMBus Controller' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_2930' (string) info.vendor = 'Intel Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.3' (string) pci.device_class = 12 (0xc) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 5 (0x5) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.3' (string) pci.product = '82801I (ICH9 Family) SMBus Controller' (string) pci.product_id = 10544 (0x2930) (int) pci.subsys_product_id = 36923 (0x903b) (int) pci.subsys_vendor = 'Sony Corporation' (string) pci.subsys_vendor_id = 4173 (0x104d) (int) pci.vendor = 'Intel Corporation' (string) pci.vendor_id = 32902 (0x8086) (int) udi = '/org/freedesktop/Hal/devices/pci_8086_2928' info.linux.driver = 'ata_piix' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'ICH9M/M-E 2 port SATA IDE Controller' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_2928' (string) info.vendor = 'Intel Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2' (string) pci.device_class = 1 (0x1) (int) pci.device_protocol = 143 (0x8f) (int) pci.device_subclass = 1 (0x1) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2' (string) pci.product = 'ICH9M/M-E 2 port SATA IDE Controller' (string) pci.product_id = 10536 (0x2928) (int) pci.subsys_product_id = 36923 (0x903b) (int) pci.subsys_vendor = 'Sony Corporation' (string) pci.subsys_vendor_id = 4173 (0x104d) (int) pci.vendor = 'Intel Corporation' (string) pci.vendor_id = 32902 (0x8086) (int) udi = '/org/freedesktop/Hal/devices/pci_8086_2928_scsi_host_0' info.capabilities = {'scsi_host'} (string list) info.category = 'scsi_host' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_2928' (string) info.product = 'SCSI Host Adapter' (string) info.subsystem = 'scsi_host' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_2928_scsi_host_0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_host' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host1' (string) scsi_host.host = 1 (0x1) (int) udi = '/org/freedesktop/Hal/devices/pci_8086_2928_scsi_host_0_scsi_host' info.capabilities = {'scsi_host'} (string list) info.category = 'scsi_host' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_2928_scsi_host_0' (string) info.product = 'SCSI Host Adapter' (string) info.subsystem = 'scsi_host' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_2928_scsi_host_0_scsi_host' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_host' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host1/scsi_host/host1' (string) scsi_host.host = 1 (0x1) (int) udi = '/org/freedesktop/Hal/devices/pci_8086_2928_scsi_host_0_scsi_device_lun0' info.linux.driver = 'sr' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_2928_scsi_host_0' (string) info.product = 'SCSI Device' (string) info.subsystem = 'scsi' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_2928_scsi_host_0_scsi_device_lun0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0' (string) scsi.bus = 0 (0x0) (int) scsi.host = 1 (0x1) (int) scsi.lun = 0 (0x0) (int) scsi.model = 'DVD RW AD-7560S' (string) scsi.target = 0 (0x0) (int) scsi.type = 'cdrom' (string) scsi.vendor = 'Optiarc' (string) udi = '/org/freedesktop/Hal/devices/pci_8086_2928_scsi_host_0_scsi_device_lun0_scsi_generic' info.capabilities = {'scsi_generic'} (string list) info.category = 'scsi_generic' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_2928_scsi_host_0_scsi_device_lun0' (string) info.product = 'SCSI Generic Interface' (string) info.subsystem = 'scsi_generic' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_2928_scsi_host_0_scsi_device_lun0_scsi_generic' (string) linux.device_file = '/dev/sg1' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_generic' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0/scsi_generic/sg1' (string) scsi_generic.device = '/dev/sg1' (string) udi = '/org/freedesktop/Hal/devices/storage_model_DVD_RW_AD_7560S' access_control.file = '/dev/scd0' (string) access_control.type = 'cdrom' (string) block.device = '/dev/scd0' (string) block.is_volume = false (bool) block.major = 11 (0xb) (int) block.minor = 0 (0x0) (int) block.storage_device = '/org/freedesktop/Hal/devices/storage_model_DVD_RW_AD_7560S' (string) info.addons = {'hald-addon-storage'} (string list) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'storage', 'block', 'storage.cdrom', 'access_control', 'access_control'} (string list) info.category = 'storage' (string) info.interfaces = {'org.freedesktop.Hal.Device.Storage', 'org.freedesktop.Hal.Device.Storage', 'org.freedesktop.Hal.Device.Storage.Removable'} (string list) info.parent = '/org/freedesktop/Hal/devices/pci_8086_2928_scsi_host_0_scsi_device_lun0' (string) info.product = 'DVD RW AD-7560S' (string) info.udi = '/org/freedesktop/Hal/devices/storage_model_DVD_RW_AD_7560S' (string) info.vendor = 'Optiarc' (string) linux.hotplug_type = 3 (0x3) (int) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0/block/sr0' (string) org.freedesktop.Hal.Device.Storage.method_argnames = {'extra_options', 'extra_options'} (string list) org.freedesktop.Hal.Device.Storage.method_execpaths = {'hal-storage-eject', 'hal-storage-closetray'} (string list) org.freedesktop.Hal.Device.Storage.method_names = {'Eject', 'CloseTray'} (string list) org.freedesktop.Hal.Device.Storage.method_signatures = {'as', 'as'} (string list) storage.automount_enabled_hint = true (bool) storage.bus = 'scsi' (string) storage.cdrom.bd = false (bool) storage.cdrom.bdr = false (bool) storage.cdrom.bdre = false (bool) storage.cdrom.cdr = true (bool) storage.cdrom.cdrw = true (bool) storage.cdrom.dvd = true (bool) storage.cdrom.dvdplusr = true (bool) storage.cdrom.dvdplusrdl = true (bool) storage.cdrom.dvdplusrw = true (bool) storage.cdrom.dvdplusrwdl = false (bool) storage.cdrom.dvdr = true (bool) storage.cdrom.dvdram = true (bool) storage.cdrom.dvdrw = true (bool) storage.cdrom.hddvd = false (bool) storage.cdrom.hddvdr = false (bool) storage.cdrom.hddvdrw = false (bool) storage.cdrom.mo = false (bool) storage.cdrom.mrw = true (bool) storage.cdrom.mrw_w = true (bool) storage.cdrom.read_speed = 4234 (0x108a) (int) storage.cdrom.support_media_changed = true (bool) storage.cdrom.support_multisession = true (bool) storage.cdrom.write_speed = 4234 (0x108a) (int) storage.cdrom.write_speeds = {'4234', '3528', '2822', '1764'} (string list) storage.drive_type = 'cdrom' (string) storage.hotpluggable = false (bool) storage.lun = 0 (0x0) (int) storage.media_check_enabled = true (bool) storage.model = 'DVD RW AD-7560S' (string) storage.no_partitions_hint = true (bool) storage.originating_device = '/org/freedesktop/Hal/devices/computer' (string) storage.partitioning_scheme = '' (string) storage.removable = true (bool) storage.removable.media_available = false (bool) storage.removable.support_async_notification = false (bool) storage.requires_eject = true (bool) storage.size = 0 (0x0) (uint64) storage.vendor = 'Optiarc' (string) udi = '/org/freedesktop/Hal/devices/pci_8086_2928_scsi_host' info.capabilities = {'scsi_host'} (string list) info.category = 'scsi_host' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_2928' (string) info.product = 'SCSI Host Adapter' (string) info.subsystem = 'scsi_host' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_2928_scsi_host' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_host' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host0' (string) scsi_host.host = 0 (0x0) (int) udi = '/org/freedesktop/Hal/devices/pci_8086_2928_scsi_host_scsi_host' info.capabilities = {'scsi_host'} (string list) info.category = 'scsi_host' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_2928_scsi_host' (string) info.product = 'SCSI Host Adapter' (string) info.subsystem = 'scsi_host' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_2928_scsi_host_scsi_host' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_host' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host0/scsi_host/host0' (string) scsi_host.host = 0 (0x0) (int) udi = '/org/freedesktop/Hal/devices/pci_8086_2928_scsi_host_scsi_device_lun0' info.linux.driver = 'sd' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_2928_scsi_host' (string) info.product = 'SCSI Device' (string) info.subsystem = 'scsi' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_2928_scsi_host_scsi_device_lun0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0' (string) scsi.bus = 0 (0x0) (int) scsi.host = 0 (0x0) (int) scsi.lun = 0 (0x0) (int) scsi.model = 'FUJITSU MHY2250B' (string) scsi.target = 0 (0x0) (int) scsi.type = 'disk' (string) scsi.vendor = 'ATA' (string) udi = '/org/freedesktop/Hal/devices/pci_8086_2928_scsi_host_scsi_device_lun0_scsi_generic' info.capabilities = {'scsi_generic'} (string list) info.category = 'scsi_generic' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_2928_scsi_host_scsi_device_lun0' (string) info.product = 'SCSI Generic Interface' (string) info.subsystem = 'scsi_generic' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_2928_scsi_host_scsi_device_lun0_scsi_generic' (string) linux.device_file = '/dev/sg0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_generic' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/scsi_generic/sg0' (string) scsi_generic.device = '/dev/sg0' (string) udi = '/org/freedesktop/Hal/devices/storage_serial_1ATA_FUJITSU_MHY2250BH_K41LT882M7LK' block.device = '/dev/sda' (string) block.is_volume = false (bool) block.major = 8 (0x8) (int) block.minor = 0 (0x0) (int) block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_1ATA_FUJITSU_MHY2250BH_K41LT882M7LK' (string) info.capabilities = {'storage', 'block'} (string list) info.category = 'storage' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_2928_scsi_host_scsi_device_lun0' (string) info.product = 'FUJITSU MHY2250B' (string) info.udi = '/org/freedesktop/Hal/devices/storage_serial_1ATA_FUJITSU_MHY2250BH_K41LT882M7LK' (string) info.vendor = 'ATA' (string) linux.hotplug_type = 3 (0x3) (int) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda' (string) storage.automount_enabled_hint = false (bool) storage.bus = 'scsi' (string) storage.drive_type = 'disk' (string) storage.firmware_version = '0000' (string) storage.hotpluggable = false (bool) storage.lun = 0 (0x0) (int) storage.media_check_enabled = false (bool) storage.model = 'FUJITSU MHY2250B' (string) storage.no_partitions_hint = false (bool) storage.originating_device = '/org/freedesktop/Hal/devices/computer' (string) storage.partitioning_scheme = 'mbr' (string) storage.removable = false (bool) storage.removable.media_available = true (bool) storage.removable.media_size = 250059350016 (0x3a38b2e000) (uint64) storage.requires_eject = false (bool) storage.serial = '1ATA_FUJITSU_MHY2250BH_K41LT882M7LK' (string) storage.size = 250059350016 (0x3a38b2e000) (uint64) storage.vendor = 'ATA' (string) udi = '/org/freedesktop/Hal/devices/volume_uuid_6571ba94_f0d3_475c_9337_9f17ce7cc13b' block.device = '/dev/sda4' (string) block.is_volume = true (bool) block.major = 8 (0x8) (int) block.minor = 4 (0x4) (int) block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_1ATA_FUJITSU_MHY2250BH_K41LT882M7LK' (string) info.capabilities = {'volume', 'block'} (string list) info.category = 'volume' (string) info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list) info.parent = '/org/freedesktop/Hal/devices/storage_serial_1ATA_FUJITSU_MHY2250BH_K41LT882M7LK' (string) info.product = 'Volume (ext3)' (string) info.udi = '/org/freedesktop/Hal/devices/volume_uuid_6571ba94_f0d3_475c_9337_9f17ce7cc13b' (string) linux.hotplug_type = 3 (0x3) (int) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda4' (string) org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list) org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list) org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list) org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list) storage.model = '' (string) volume.block_size = 512 (0x200) (int) volume.fstype = 'ext3' (string) volume.fsusage = 'filesystem' (string) volume.fsversion = '1.0' (string) volume.ignore = false (bool) volume.is_disc = false (bool) volume.is_mounted = true (bool) volume.is_mounted_read_only = false (bool) volume.is_partition = true (bool) volume.label = '' (string) volume.linux.is_device_mapper = false (bool) volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'acl', 'user_xattr', 'data='} (string list) volume.mount_point = '/home' (string) volume.num_blocks = 372386700 (0x16322b8c) (uint64) volume.partition.flags = {} (string list) volume.partition.label = '' (string) volume.partition.media_size = 250059350016 (0x3a38b2e000) (uint64) volume.partition.number = 4 (0x4) (int) volume.partition.scheme = 'mbr' (string) volume.partition.start = 59394746880 (0xdd433ea00) (uint64) volume.partition.type = '0x83' (string) volume.partition.uuid = '' (string) volume.size = 190661990400 (0x2c64571800) (uint64) volume.unmount.valid_options = {'lazy'} (string list) volume.uuid = '6571ba94-f0d3-475c-9337-9f17ce7cc13b' (string) udi = '/org/freedesktop/Hal/devices/volume_uuid_d32c5c2e_01e7_4887_b1a6_84d9177e3d2d' block.device = '/dev/sda3' (string) block.is_volume = true (bool) block.major = 8 (0x8) (int) block.minor = 3 (0x3) (int) block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_1ATA_FUJITSU_MHY2250BH_K41LT882M7LK' (string) info.capabilities = {'volume', 'block'} (string list) info.category = 'volume' (string) info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list) info.parent = '/org/freedesktop/Hal/devices/storage_serial_1ATA_FUJITSU_MHY2250BH_K41LT882M7LK' (string) info.product = 'Volume (ext3)' (string) info.udi = '/org/freedesktop/Hal/devices/volume_uuid_d32c5c2e_01e7_4887_b1a6_84d9177e3d2d' (string) linux.hotplug_type = 3 (0x3) (int) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda3' (string) org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list) org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list) org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list) org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list) storage.model = '' (string) volume.block_size = 512 (0x200) (int) volume.fstype = 'ext3' (string) volume.fsusage = 'filesystem' (string) volume.fsversion = '1.0' (string) volume.ignore = false (bool) volume.is_disc = false (bool) volume.is_mounted = true (bool) volume.is_mounted_read_only = false (bool) volume.is_partition = true (bool) volume.label = '' (string) volume.linux.is_device_mapper = false (bool) volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'acl', 'user_xattr', 'data='} (string list) volume.mount_point = '/' (string) volume.num_blocks = 100004625 (0x5f5f311) (uint64) volume.partition.flags = {} (string list) volume.partition.label = '' (string) volume.partition.media_size = 250059350016 (0x3a38b2e000) (uint64) volume.partition.number = 3 (0x3) (int) volume.partition.scheme = 'mbr' (string) volume.partition.start = 8192378880 (0x1e84dc800) (uint64) volume.partition.type = '0x83' (string) volume.partition.uuid = '' (string) volume.size = 51202368000 (0xbebe62200) (uint64) volume.unmount.valid_options = {'lazy'} (string list) volume.uuid = 'd32c5c2e-01e7-4887-b1a6-84d9177e3d2d' (string) udi = '/org/freedesktop/Hal/devices/volume_uuid_036408bd_4e11_4321_9987_4bb0b087163f' block.device = '/dev/sda2' (string) block.is_volume = true (bool) block.major = 8 (0x8) (int) block.minor = 2 (0x2) (int) block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_1ATA_FUJITSU_MHY2250BH_K41LT882M7LK' (string) info.capabilities = {'volume', 'block'} (string list) info.category = 'volume' (string) info.parent = '/org/freedesktop/Hal/devices/storage_serial_1ATA_FUJITSU_MHY2250BH_K41LT882M7LK' (string) info.product = 'Volume (swap)' (string) info.udi = '/org/freedesktop/Hal/devices/volume_uuid_036408bd_4e11_4321_9987_4bb0b087163f' (string) linux.hotplug_type = 3 (0x3) (int) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda2' (string) storage.model = '' (string) volume.block_size = 512 (0x200) (int) volume.fstype = 'swap' (string) volume.fsusage = 'other' (string) volume.fsversion = '2' (string) volume.is_disc = false (bool) volume.is_mounted = false (bool) volume.is_mounted_read_only = false (bool) volume.is_partition = true (bool) volume.label = '' (string) volume.linux.is_device_mapper = false (bool) volume.mount_point = '' (string) volume.num_blocks = 8000370 (0x7a1372) (uint64) volume.partition.flags = {} (string list) volume.partition.label = '' (string) volume.partition.media_size = 250059350016 (0x3a38b2e000) (uint64) volume.partition.number = 2 (0x2) (int) volume.partition.scheme = 'mbr' (string) volume.partition.start = 4096189440 (0xf426e400) (uint64) volume.partition.type = '0x82' (string) volume.partition.uuid = '' (string) volume.size = 4096189440 (0xf426e400) (uint64) volume.uuid = '036408bd-4e11-4321-9987-4bb0b087163f' (string) udi = '/org/freedesktop/Hal/devices/volume_uuid_d95d5bb3_36c3_46d2_a849_41b5eb5e5110' block.device = '/dev/sda1' (string) block.is_volume = true (bool) block.major = 8 (0x8) (int) block.minor = 1 (0x1) (int) block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_1ATA_FUJITSU_MHY2250BH_K41LT882M7LK' (string) info.capabilities = {'volume', 'block'} (string list) info.category = 'volume' (string) info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list) info.parent = '/org/freedesktop/Hal/devices/storage_serial_1ATA_FUJITSU_MHY2250BH_K41LT882M7LK' (string) info.product = 'Volume (ext3)' (string) info.udi = '/org/freedesktop/Hal/devices/volume_uuid_d95d5bb3_36c3_46d2_a849_41b5eb5e5110' (string) linux.hotplug_type = 3 (0x3) (int) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda1' (string) org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list) org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list) org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list) org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list) storage.model = '' (string) volume.block_size = 512 (0x200) (int) volume.fstype = 'ext3' (string) volume.fsusage = 'filesystem' (string) volume.fsversion = '1.0' (string) volume.ignore = false (bool) volume.is_disc = false (bool) volume.is_mounted = true (bool) volume.is_mounted_read_only = false (bool) volume.is_partition = true (bool) volume.label = '' (string) volume.linux.is_device_mapper = false (bool) volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'acl', 'user_xattr', 'data='} (string list) volume.mount_point = '/boot' (string) volume.num_blocks = 8000307 (0x7a1333) (uint64) volume.partition.flags = {'boot'} (string list) volume.partition.label = '' (string) volume.partition.media_size = 250059350016 (0x3a38b2e000) (uint64) volume.partition.number = 1 (0x1) (int) volume.partition.scheme = 'mbr' (string) volume.partition.start = 32256 (0x7e00) (uint64) volume.partition.type = '0x83' (string) volume.partition.uuid = '' (string) volume.size = 4096157184 (0xf4266600) (uint64) volume.unmount.valid_options = {'lazy'} (string list) volume.uuid = 'd95d5bb3-36c3-46d2-a849-41b5eb5e5110' (string) udi = '/org/freedesktop/Hal/devices/pci_8086_2917' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'ICH9M-E LPC Interface Controller' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_2917' (string) info.vendor = 'Intel Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.0' (string) pci.device_class = 6 (0x6) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 1 (0x1) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.0' (string) pci.product = 'ICH9M-E LPC Interface Controller' (string) pci.product_id = 10519 (0x2917) (int) pci.subsys_product_id = 36923 (0x903b) (int) pci.subsys_vendor = 'Sony Corporation' (string) pci.subsys_vendor_id = 4173 (0x104d) (int) pci.vendor = 'Intel Corporation' (string) pci.vendor_id = 32902 (0x8086) (int) udi = '/org/freedesktop/Hal/devices/pci_8086_2448' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = '82801 Mobile PCI Bridge' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_2448' (string) info.vendor = 'Intel Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0' (string) pci.device_class = 6 (0x6) (int) pci.device_protocol = 1 (0x1) (int) pci.device_subclass = 4 (0x4) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0' (string) pci.product = '82801 Mobile PCI Bridge' (string) pci.product_id = 9288 (0x2448) (int) pci.subsys_product_id = 0 (0x0) (int) pci.subsys_vendor_id = 0 (0x0) (int) pci.vendor = 'Intel Corporation' (string) pci.vendor_id = 32902 (0x8086) (int) udi = '/org/freedesktop/Hal/devices/pci_1180_592' info.parent = '/org/freedesktop/Hal/devices/pci_8086_2448' (string) info.product = 'R5C592 Memory Stick Bus Host Adapter' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1180_592' (string) info.vendor = 'Ricoh Co Ltd' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:01:07.4' (string) pci.device_class = 8 (0x8) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 128 (0x80) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:01:07.4' (string) pci.product = 'R5C592 Memory Stick Bus Host Adapter' (string) pci.product_id = 1426 (0x592) (int) pci.subsys_product_id = 36923 (0x903b) (int) pci.subsys_vendor = 'Sony Corporation' (string) pci.subsys_vendor_id = 4173 (0x104d) (int) pci.vendor = 'Ricoh Co Ltd' (string) pci.vendor_id = 4480 (0x1180) (int) udi = '/org/freedesktop/Hal/devices/pci_1180_822' info.linux.driver = 'sdhci-pci' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_2448' (string) info.product = 'R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1180_822' (string) info.vendor = 'Ricoh Co Ltd' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:01:07.2' (string) pci.device_class = 8 (0x8) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 5 (0x5) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:01:07.2' (string) pci.product = 'R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter' (string) pci.product_id = 2082 (0x822) (int) pci.subsys_product_id = 36923 (0x903b) (int) pci.subsys_vendor = 'Sony Corporation' (string) pci.subsys_vendor_id = 4173 (0x104d) (int) pci.vendor = 'Ricoh Co Ltd' (string) pci.vendor_id = 4480 (0x1180) (int) udi = '/org/freedesktop/Hal/devices/pci_1180_822_mmc_host' info.capabilities = {'mmc_host'} (string list) info.category = 'mmc_host' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1180_822' (string) info.product = 'MMC/SD Host Adapter' (string) info.subsystem = 'mmc_host' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1180_822_mmc_host' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'mmc_host' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:01:07.2/mmc_host/mmc0' (string) mmc_host.host = 0 (0x0) (int) udi = '/org/freedesktop/Hal/devices/pci_1180_832' info.linux.driver = 'ohci1394' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_2448' (string) info.product = 'R5C832 IEEE 1394 Controller' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1180_832' (string) info.vendor = 'Ricoh Co Ltd' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:01:07.1' (string) pci.device_class = 12 (0xc) (int) pci.device_protocol = 16 (0x10) (int) pci.device_subclass = 0 (0x0) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:01:07.1' (string) pci.product = 'R5C832 IEEE 1394 Controller' (string) pci.product_id = 2098 (0x832) (int) pci.subsys_product_id = 36923 (0x903b) (int) pci.subsys_vendor = 'Sony Corporation' (string) pci.subsys_vendor_id = 4173 (0x104d) (int) pci.vendor = 'Ricoh Co Ltd' (string) pci.vendor_id = 4480 (0x1180) (int) udi = '/org/freedesktop/Hal/devices/pci_1180_476' info.linux.driver = 'yenta_cardbus' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_2448' (string) info.product = 'RL5c476 II' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1180_476' (string) info.vendor = 'Ricoh Co Ltd' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:01:07.0' (string) pci.device_class = 6 (0x6) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 7 (0x7) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:01:07.0' (string) pci.product = 'RL5c476 II' (string) pci.product_id = 1142 (0x476) (int) pci.subsys_product_id = 36923 (0x903b) (int) pci.subsys_vendor = 'Sony Corporation' (string) pci.subsys_vendor_id = 4173 (0x104d) (int) pci.vendor = 'Ricoh Co Ltd' (string) pci.vendor_id = 4480 (0x1180) (int) udi = '/org/freedesktop/Hal/devices/pci_8086_293a' info.linux.driver = 'ehci_hcd' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = '82801I (ICH9 Family) USB2 EHCI Controller #1' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_293a' (string) info.vendor = 'Intel Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7' (string) pci.device_class = 12 (0xc) (int) pci.device_protocol = 32 (0x20) (int) pci.device_subclass = 3 (0x3) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7' (string) pci.product = '82801I (ICH9 Family) USB2 EHCI Controller #1' (string) pci.product_id = 10554 (0x293a) (int) pci.subsys_product_id = 36923 (0x903b) (int) pci.subsys_vendor = 'Sony Corporation' (string) pci.subsys_vendor_id = 4173 (0x104d) (int) pci.vendor = 'Intel Corporation' (string) pci.vendor_id = 32902 (0x8086) (int) udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7' info.linux.driver = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_293a' (string) info.product = '2.0 root hub' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7' (string) info.vendor = 'Linux Foundation' (string) linux.device_file = '/dev/bus/usb/008/001' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb8' (string) usb_device.bus_number = 8 (0x8) (int) usb_device.can_wake_up = true (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 9 (0x9) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.device_revision_bcd = 518 (0x206) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.is_self_powered = true (bool) usb_device.linux.device_number = 1 (0x1) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb8' (string) usb_device.max_power = 0 (0x0) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.num_ports = 8 (0x8) (int) usb_device.product = '2.0 root hub' (string) usb_device.product_id = 2 (0x2) (int) usb_device.serial = '0000:00:1d.7' (string) usb_device.speed = 480.0 (480) (double) usb_device.vendor = 'Linux Foundation' (string) usb_device.vendor_id = 7531 (0x1d6b) (int) usb_device.version = 2.0 (2) (double) udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7_if0' info.linux.driver = 'hub' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7' (string) info.product = 'USB Hub Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7_if0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb8/8-0:1.0' (string) usb.bus_number = 8 (0x8) (int) usb.can_wake_up = true (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 9 (0x9) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 518 (0x206) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 9 (0x9) (int) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 0 (0x0) (int) usb.is_self_powered = true (bool) usb.linux.device_number = 1 (0x1) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb8/8-0:1.0' (string) usb.max_power = 0 (0x0) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.num_ports = 8 (0x8) (int) usb.product = 'USB Hub Interface' (string) usb.product_id = 2 (0x2) (int) usb.serial = '0000:00:1d.7' (string) usb.speed = 480.0 (480) (double) usb.vendor = 'Linux Foundation' (string) usb.vendor_id = 7531 (0x1d6b) (int) usb.version = 2.0 (2) (double) udi = '/org/freedesktop/Hal/devices/pci_8086_2939' info.linux.driver = 'uhci_hcd' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = '82801I (ICH9 Family) USB UHCI Controller #6' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_2939' (string) info.vendor = 'Intel Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3' (string) pci.device_class = 12 (0xc) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 3 (0x3) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3' (string) pci.product = '82801I (ICH9 Family) USB UHCI Controller #6' (string) pci.product_id = 10553 (0x2939) (int) pci.subsys_product_id = 36923 (0x903b) (int) pci.subsys_vendor = 'Sony Corporation' (string) pci.subsys_vendor_id = 4173 (0x104d) (int) pci.vendor = 'Intel Corporation' (string) pci.vendor_id = 32902 (0x8086) (int) udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_3' info.linux.driver = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_2939' (string) info.product = '1.1 root hub' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_3' (string) info.vendor = 'Linux Foundation' (string) linux.device_file = '/dev/bus/usb/007/001' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb7' (string) usb_device.bus_number = 7 (0x7) (int) usb_device.can_wake_up = true (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 9 (0x9) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.device_revision_bcd = 518 (0x206) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.is_self_powered = true (bool) usb_device.linux.device_number = 1 (0x1) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb7' (string) usb_device.max_power = 0 (0x0) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.num_ports = 2 (0x2) (int) usb_device.product = '1.1 root hub' (string) usb_device.product_id = 1 (0x1) (int) usb_device.serial = '0000:00:1d.3' (string) usb_device.speed = 12.0 (12) (double) usb_device.vendor = 'Linux Foundation' (string) usb_device.vendor_id = 7531 (0x1d6b) (int) usb_device.version = 1.1 (1.1) (double) udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_3_if0' info.linux.driver = 'hub' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_3' (string) info.product = 'USB Hub Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_3_if0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb7/7-0:1.0' (string) usb.bus_number = 7 (0x7) (int) usb.can_wake_up = true (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 9 (0x9) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 518 (0x206) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 9 (0x9) (int) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 0 (0x0) (int) usb.is_self_powered = true (bool) usb.linux.device_number = 1 (0x1) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb7/7-0:1.0' (string) usb.max_power = 0 (0x0) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.num_ports = 2 (0x2) (int) usb.product = 'USB Hub Interface' (string) usb.product_id = 1 (0x1) (int) usb.serial = '0000:00:1d.3' (string) usb.speed = 12.0 (12) (double) usb.vendor = 'Linux Foundation' (string) usb.vendor_id = 7531 (0x1d6b) (int) usb.version = 1.1 (1.1) (double) udi = '/org/freedesktop/Hal/devices/pci_8086_2936' info.linux.driver = 'uhci_hcd' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = '82801I (ICH9 Family) USB UHCI Controller #3' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_2936' (string) info.vendor = 'Intel Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2' (string) pci.device_class = 12 (0xc) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 3 (0x3) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2' (string) pci.product = '82801I (ICH9 Family) USB UHCI Controller #3' (string) pci.product_id = 10550 (0x2936) (int) pci.subsys_product_id = 36923 (0x903b) (int) pci.subsys_vendor = 'Sony Corporation' (string) pci.subsys_vendor_id = 4173 (0x104d) (int) pci.vendor = 'Intel Corporation' (string) pci.vendor_id = 32902 (0x8086) (int) udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_2' info.linux.driver = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_2936' (string) info.product = '1.1 root hub' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_2' (string) info.vendor = 'Linux Foundation' (string) linux.device_file = '/dev/bus/usb/006/001' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb6' (string) usb_device.bus_number = 6 (0x6) (int) usb_device.can_wake_up = true (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 9 (0x9) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.device_revision_bcd = 518 (0x206) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.is_self_powered = true (bool) usb_device.linux.device_number = 1 (0x1) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb6' (string) usb_device.max_power = 0 (0x0) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.num_ports = 2 (0x2) (int) usb_device.product = '1.1 root hub' (string) usb_device.product_id = 1 (0x1) (int) usb_device.serial = '0000:00:1d.2' (string) usb_device.speed = 12.0 (12) (double) usb_device.vendor = 'Linux Foundation' (string) usb_device.vendor_id = 7531 (0x1d6b) (int) usb_device.version = 1.1 (1.1) (double) udi = '/org/freedesktop/Hal/devices/usb_device_44e_3017_001E3DEBB002' info.linux.driver = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_2' (string) info.product = 'BCM2046 Bluetooth Device' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_44e_3017_001E3DEBB002' (string) info.vendor = 'Alps Electric Co., Ltd' (string) linux.device_file = '/dev/bus/usb/006/002' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb6/6-1' (string) usb_device.bus_number = 6 (0x6) (int) usb_device.can_wake_up = false (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 224 (0xe0) (int) usb_device.device_protocol = 1 (0x1) (int) usb_device.device_revision_bcd = 536 (0x218) (int) usb_device.device_subclass = 1 (0x1) (int) usb_device.is_self_powered = true (bool) usb_device.linux.device_number = 2 (0x2) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb6/6-1' (string) usb_device.max_power = 100 (0x64) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 4 (0x4) (int) usb_device.num_ports = 0 (0x0) (int) usb_device.product = 'BCM2046 Bluetooth Device' (string) usb_device.product_id = 12311 (0x3017) (int) usb_device.serial = '001E3DEBB002' (string) usb_device.speed = 12.0 (12) (double) usb_device.vendor = 'Alps Electric Co., Ltd' (string) usb_device.vendor_id = 1102 (0x44e) (int) usb_device.version = 2.0 (2) (double) udi = '/org/freedesktop/Hal/devices/usb_device_44e_3017_001E3DEBB002_if3' info.parent = '/org/freedesktop/Hal/devices/usb_device_44e_3017_001E3DEBB002' (string) info.product = 'USB Application Specific Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_44e_3017_001E3DEBB002_if3' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb6/6-1/6-1:1.3' (string) usb.bus_number = 6 (0x6) (int) usb.can_wake_up = false (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 224 (0xe0) (int) usb.device_protocol = 1 (0x1) (int) usb.device_revision_bcd = 536 (0x218) (int) usb.device_subclass = 1 (0x1) (int) usb.interface.class = 254 (0xfe) (int) usb.interface.number = 3 (0x3) (int) usb.interface.protocol = 1 (0x1) (int) usb.interface.subclass = 1 (0x1) (int) usb.is_self_powered = true (bool) usb.linux.device_number = 2 (0x2) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb6/6-1/6-1:1.3' (string) usb.max_power = 100 (0x64) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 4 (0x4) (int) usb.num_ports = 0 (0x0) (int) usb.product = 'USB Application Specific Interface' (string) usb.product_id = 12311 (0x3017) (int) usb.serial = '001E3DEBB002' (string) usb.speed = 12.0 (12) (double) usb.vendor = 'Alps Electric Co., Ltd' (string) usb.vendor_id = 1102 (0x44e) (int) usb.version = 2.0 (2) (double) udi = '/org/freedesktop/Hal/devices/usb_device_44e_3017_001E3DEBB002_if2' info.parent = '/org/freedesktop/Hal/devices/usb_device_44e_3017_001E3DEBB002' (string) info.product = 'USB Vendor Specific Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_44e_3017_001E3DEBB002_if2' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb6/6-1/6-1:1.2' (string) usb.bus_number = 6 (0x6) (int) usb.can_wake_up = false (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 224 (0xe0) (int) usb.device_protocol = 1 (0x1) (int) usb.device_revision_bcd = 536 (0x218) (int) usb.device_subclass = 1 (0x1) (int) usb.interface.class = 255 (0xff) (int) usb.interface.number = 2 (0x2) (int) usb.interface.protocol = 255 (0xff) (int) usb.interface.subclass = 255 (0xff) (int) usb.is_self_powered = true (bool) usb.linux.device_number = 2 (0x2) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb6/6-1/6-1:1.2' (string) usb.max_power = 100 (0x64) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 4 (0x4) (int) usb.num_ports = 0 (0x0) (int) usb.product = 'USB Vendor Specific Interface' (string) usb.product_id = 12311 (0x3017) (int) usb.serial = '001E3DEBB002' (string) usb.speed = 12.0 (12) (double) usb.vendor = 'Alps Electric Co., Ltd' (string) usb.vendor_id = 1102 (0x44e) (int) usb.version = 2.0 (2) (double) udi = '/org/freedesktop/Hal/devices/usb_device_44e_3017_001E3DEBB002_if1' info.linux.driver = 'btusb' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_44e_3017_001E3DEBB002' (string) info.product = 'USB Wireless Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_44e_3017_001E3DEBB002_if1' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb6/6-1/6-1:1.1' (string) usb.bus_number = 6 (0x6) (int) usb.can_wake_up = false (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 224 (0xe0) (int) usb.device_protocol = 1 (0x1) (int) usb.device_revision_bcd = 536 (0x218) (int) usb.device_subclass = 1 (0x1) (int) usb.interface.class = 224 (0xe0) (int) usb.interface.number = 1 (0x1) (int) usb.interface.protocol = 1 (0x1) (int) usb.interface.subclass = 1 (0x1) (int) usb.is_self_powered = true (bool) usb.linux.device_number = 2 (0x2) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb6/6-1/6-1:1.1' (string) usb.max_power = 100 (0x64) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 4 (0x4) (int) usb.num_ports = 0 (0x0) (int) usb.product = 'USB Wireless Interface' (string) usb.product_id = 12311 (0x3017) (int) usb.serial = '001E3DEBB002' (string) usb.speed = 12.0 (12) (double) usb.vendor = 'Alps Electric Co., Ltd' (string) usb.vendor_id = 1102 (0x44e) (int) usb.version = 2.0 (2) (double) udi = '/org/freedesktop/Hal/devices/usb_device_44e_3017_001E3DEBB002_if0' info.linux.driver = 'btusb' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_44e_3017_001E3DEBB002' (string) info.product = 'USB Wireless Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_44e_3017_001E3DEBB002_if0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb6/6-1/6-1:1.0' (string) usb.bus_number = 6 (0x6) (int) usb.can_wake_up = false (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 224 (0xe0) (int) usb.device_protocol = 1 (0x1) (int) usb.device_revision_bcd = 536 (0x218) (int) usb.device_subclass = 1 (0x1) (int) usb.interface.class = 224 (0xe0) (int) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 1 (0x1) (int) usb.interface.subclass = 1 (0x1) (int) usb.is_self_powered = true (bool) usb.linux.device_number = 2 (0x2) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb6/6-1/6-1:1.0' (string) usb.max_power = 100 (0x64) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 4 (0x4) (int) usb.num_ports = 0 (0x0) (int) usb.product = 'USB Wireless Interface' (string) usb.product_id = 12311 (0x3017) (int) usb.serial = '001E3DEBB002' (string) usb.speed = 12.0 (12) (double) usb.vendor = 'Alps Electric Co., Ltd' (string) usb.vendor_id = 1102 (0x44e) (int) usb.version = 2.0 (2) (double) udi = '/org/freedesktop/Hal/devices/usb_device_44e_3017_001E3DEBB002_if0_bluetooth_hci_0' bluetooth_hci.address = 0 (0x0) (uint64) bluetooth_hci.originating_device = '/org/freedesktop/Hal/devices/usb_device_44e_3017_001E3DEBB002_if0' (string) info.capabilities = {'bluetooth_hci'} (string list) info.category = 'bluetooth_hci' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_44e_3017_001E3DEBB002_if0' (string) info.product = 'Bluetooth Host Controller Interface' (string) info.subsystem = 'bluetooth' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_44e_3017_001E3DEBB002_if0_bluetooth_hci_0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'bluetooth' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb6/6-1/6-1:1.0/bluetooth/hci0' (string) udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_2_if0' info.linux.driver = 'hub' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_2' (string) info.product = 'USB Hub Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_2_if0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb6/6-0:1.0' (string) usb.bus_number = 6 (0x6) (int) usb.can_wake_up = true (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 9 (0x9) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 518 (0x206) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 9 (0x9) (int) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 0 (0x0) (int) usb.is_self_powered = true (bool) usb.linux.device_number = 1 (0x1) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb6/6-0:1.0' (string) usb.max_power = 0 (0x0) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.num_ports = 2 (0x2) (int) usb.product = 'USB Hub Interface' (string) usb.product_id = 1 (0x1) (int) usb.serial = '0000:00:1d.2' (string) usb.speed = 12.0 (12) (double) usb.vendor = 'Linux Foundation' (string) usb.vendor_id = 7531 (0x1d6b) (int) usb.version = 1.1 (1.1) (double) udi = '/org/freedesktop/Hal/devices/pci_8086_2935' info.linux.driver = 'uhci_hcd' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = '82801I (ICH9 Family) USB UHCI Controller #2' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_2935' (string) info.vendor = 'Intel Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1' (string) pci.device_class = 12 (0xc) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 3 (0x3) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1' (string) pci.product = '82801I (ICH9 Family) USB UHCI Controller #2' (string) pci.product_id = 10549 (0x2935) (int) pci.subsys_product_id = 36923 (0x903b) (int) pci.subsys_vendor = 'Sony Corporation' (string) pci.subsys_vendor_id = 4173 (0x104d) (int) pci.vendor = 'Intel Corporation' (string) pci.vendor_id = 32902 (0x8086) (int) udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1' info.linux.driver = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_2935' (string) info.product = '1.1 root hub' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1' (string) info.vendor = 'Linux Foundation' (string) linux.device_file = '/dev/bus/usb/005/001' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb5' (string) usb_device.bus_number = 5 (0x5) (int) usb_device.can_wake_up = true (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 9 (0x9) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.device_revision_bcd = 518 (0x206) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.is_self_powered = true (bool) usb_device.linux.device_number = 1 (0x1) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb5' (string) usb_device.max_power = 0 (0x0) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.num_ports = 2 (0x2) (int) usb_device.product = '1.1 root hub' (string) usb_device.product_id = 1 (0x1) (int) usb_device.serial = '0000:00:1d.1' (string) usb_device.speed = 12.0 (12) (double) usb_device.vendor = 'Linux Foundation' (string) usb_device.vendor_id = 7531 (0x1d6b) (int) usb_device.version = 1.1 (1.1) (double) udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1_if0' info.linux.driver = 'hub' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1' (string) info.product = 'USB Hub Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1_if0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb5/5-0:1.0' (string) usb.bus_number = 5 (0x5) (int) usb.can_wake_up = true (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 9 (0x9) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 518 (0x206) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 9 (0x9) (int) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 0 (0x0) (int) usb.is_self_powered = true (bool) usb.linux.device_number = 1 (0x1) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb5/5-0:1.0' (string) usb.max_power = 0 (0x0) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.num_ports = 2 (0x2) (int) usb.product = 'USB Hub Interface' (string) usb.product_id = 1 (0x1) (int) usb.serial = '0000:00:1d.1' (string) usb.speed = 12.0 (12) (double) usb.vendor = 'Linux Foundation' (string) usb.vendor_id = 7531 (0x1d6b) (int) usb.version = 1.1 (1.1) (double) udi = '/org/freedesktop/Hal/devices/pci_8086_2934' info.linux.driver = 'uhci_hcd' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = '82801I (ICH9 Family) USB UHCI Controller #1' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_2934' (string) info.vendor = 'Intel Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0' (string) pci.device_class = 12 (0xc) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 3 (0x3) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0' (string) pci.product = '82801I (ICH9 Family) USB UHCI Controller #1' (string) pci.product_id = 10548 (0x2934) (int) pci.subsys_product_id = 36923 (0x903b) (int) pci.subsys_vendor = 'Sony Corporation' (string) pci.subsys_vendor_id = 4173 (0x104d) (int) pci.vendor = 'Intel Corporation' (string) pci.vendor_id = 32902 (0x8086) (int) udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_0' info.linux.driver = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_2934' (string) info.product = '1.1 root hub' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_0' (string) info.vendor = 'Linux Foundation' (string) linux.device_file = '/dev/bus/usb/004/001' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb4' (string) usb_device.bus_number = 4 (0x4) (int) usb_device.can_wake_up = true (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 9 (0x9) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.device_revision_bcd = 518 (0x206) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.is_self_powered = true (bool) usb_device.linux.device_number = 1 (0x1) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb4' (string) usb_device.max_power = 0 (0x0) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.num_ports = 2 (0x2) (int) usb_device.product = '1.1 root hub' (string) usb_device.product_id = 1 (0x1) (int) usb_device.serial = '0000:00:1d.0' (string) usb_device.speed = 12.0 (12) (double) usb_device.vendor = 'Linux Foundation' (string) usb_device.vendor_id = 7531 (0x1d6b) (int) usb_device.version = 1.1 (1.1) (double) udi = '/org/freedesktop/Hal/devices/usb_device_46d_c50e_noserial' battery.charge_level.current = 7 (0x7) (int) battery.charge_level.design = 7 (0x7) (int) battery.charge_level.last_full = 7 (0x7) (int) battery.charge_level.percentage = 100 (0x64) (int) battery.command_interface = 'csr' (string) battery.csr.has_res = false (bool) battery.csr.has_sms = false (bool) battery.csr.is_dual = false (bool) battery.is_rechargeable = true (bool) battery.present = true (bool) battery.type = 'mouse' (string) info.addons = {'hald-addon-usb-csr'} (string list) info.capabilities = {'battery'} (string list) info.category = 'battery' (string) info.linux.driver = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_0' (string) info.product = 'MX1000 Laser Mouse' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_46d_c50e_noserial' (string) info.vendor = 'Logitech, Inc.' (string) linux.device_file = '/dev/bus/usb/004/003' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1' (string) usb_device.bus_number = 4 (0x4) (int) usb_device.can_wake_up = true (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 0 (0x0) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.device_revision_bcd = 9488 (0x2510) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.is_self_powered = false (bool) usb_device.linux.device_number = 3 (0x3) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1' (string) usb_device.max_power = 70 (0x46) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.num_ports = 0 (0x0) (int) usb_device.product = 'MX-1000 Cordless Mouse Receiver' (string) usb_device.product_id = 50446 (0xc50e) (int) usb_device.speed = 1.5 (1.5) (double) usb_device.vendor = 'Logitech, Inc.' (string) usb_device.vendor_id = 1133 (0x46d) (int) usb_device.version = 1.1 (1.1) (double) udi = '/org/freedesktop/Hal/devices/usb_device_46d_c50e_noserial_if0' info.linux.driver = 'usbhid' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_46d_c50e_noserial' (string) info.product = 'USB HID Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_46d_c50e_noserial_if0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1:1.0' (string) usb.bus_number = 4 (0x4) (int) usb.can_wake_up = true (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 0 (0x0) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 9488 (0x2510) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 3 (0x3) (int) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 2 (0x2) (int) usb.interface.subclass = 1 (0x1) (int) usb.is_self_powered = false (bool) usb.linux.device_number = 3 (0x3) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1:1.0' (string) usb.max_power = 70 (0x46) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.num_ports = 0 (0x0) (int) usb.product = 'USB HID Interface' (string) usb.product_id = 50446 (0xc50e) (int) usb.speed = 1.5 (1.5) (double) usb.vendor = 'Logitech, Inc.' (string) usb.vendor_id = 1133 (0x46d) (int) usb.version = 1.1 (1.1) (double) udi = '/org/freedesktop/Hal/devices/usb_device_46d_c50e_noserial_if0_logicaldev_input' info.capabilities = {'input', 'input.mouse'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_46d_c50e_noserial_if0' (string) info.product = 'Logitech USB RECEIVER' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_46d_c50e_noserial_if0_logicaldev_input' (string) input.device = '/dev/input/event2' (string) input.originating_device = '/org/freedesktop/Hal/devices/usb_device_46d_c50e_noserial_if0' (string) input.product = 'Logitech USB RECEIVER' (string) input.x11_driver = 'evdev' (string) linux.device_file = '/dev/input/event2' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1:1.0/input/input2/event2' (string) udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_0_if0' info.linux.driver = 'hub' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_0' (string) info.product = 'USB Hub Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_0_if0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-0:1.0' (string) usb.bus_number = 4 (0x4) (int) usb.can_wake_up = true (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 9 (0x9) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 518 (0x206) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 9 (0x9) (int) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 0 (0x0) (int) usb.is_self_powered = true (bool) usb.linux.device_number = 1 (0x1) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-0:1.0' (string) usb.max_power = 0 (0x0) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.num_ports = 2 (0x2) (int) usb.product = 'USB Hub Interface' (string) usb.product_id = 1 (0x1) (int) usb.serial = '0000:00:1d.0' (string) usb.speed = 12.0 (12) (double) usb.vendor = 'Linux Foundation' (string) usb.vendor_id = 7531 (0x1d6b) (int) usb.version = 1.1 (1.1) (double) udi = '/org/freedesktop/Hal/devices/pci_8086_2946' info.linux.driver = 'pcieport-driver' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = '82801I (ICH9 Family) PCI Express Port 4' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_2946' (string) info.vendor = 'Intel Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.3' (string) pci.device_class = 6 (0x6) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 4 (0x4) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.3' (string) pci.product = '82801I (ICH9 Family) PCI Express Port 4' (string) pci.product_id = 10566 (0x2946) (int) pci.subsys_product_id = 0 (0x0) (int) pci.subsys_vendor_id = 0 (0x0) (int) pci.vendor = 'Intel Corporation' (string) pci.vendor_id = 32902 (0x8086) (int) udi = '/org/freedesktop/Hal/devices/pci_8086_2944' info.linux.driver = 'pcieport-driver' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = '82801I (ICH9 Family) PCI Express Port 3' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_2944' (string) info.vendor = 'Intel Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.2' (string) pci.device_class = 6 (0x6) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 4 (0x4) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.2' (string) pci.product = '82801I (ICH9 Family) PCI Express Port 3' (string) pci.product_id = 10564 (0x2944) (int) pci.subsys_product_id = 0 (0x0) (int) pci.subsys_vendor_id = 0 (0x0) (int) pci.vendor = 'Intel Corporation' (string) pci.vendor_id = 32902 (0x8086) (int) udi = '/org/freedesktop/Hal/devices/pci_8086_4232' info.linux.driver = 'iwlagn' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_2944' (string) info.product = 'Wireless WiFi Link 5100' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_4232' (string) info.vendor = 'Intel Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.2/0000:04:00.0' (string) pci.device_class = 2 (0x2) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 128 (0x80) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.2/0000:04:00.0' (string) pci.product = 'Wireless WiFi Link 5100' (string) pci.product_id = 16946 (0x4232) (int) pci.subsys_product_id = 4865 (0x1301) (int) pci.subsys_vendor = 'Intel Corporation' (string) pci.subsys_vendor_id = 32902 (0x8086) (int) pci.vendor = 'Intel Corporation' (string) pci.vendor_id = 32902 (0x8086) (int) udi = '/org/freedesktop/Hal/devices/net_00_21_5d_28_fd_24_0' info.capabilities = {'net', 'net.80211control'} (string list) info.category = 'net.80211control' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_4232' (string) info.product = 'Networking Wireless Control Interface' (string) info.subsystem = 'net' (string) info.udi = '/org/freedesktop/Hal/devices/net_00_21_5d_28_fd_24_0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'net' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.2/0000:04:00.0/net/wmaster0' (string) net.address = '00:21:5d:28:fd:24' (string) net.arp_proto_hw_id = 801 (0x321) (int) net.interface = 'wmaster0' (string) net.linux.ifindex = 3 (0x3) (int) net.originating_device = '/org/freedesktop/Hal/devices/pci_8086_4232' (string) udi = '/org/freedesktop/Hal/devices/net_00_21_5d_28_fd_24' info.capabilities = {'net', 'net.80211'} (string list) info.category = 'net.80211' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_4232' (string) info.product = 'WLAN Interface' (string) info.subsystem = 'net' (string) info.udi = '/org/freedesktop/Hal/devices/net_00_21_5d_28_fd_24' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'net' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.2/0000:04:00.0/net/wlan0' (string) net.80211.mac_address = 143296888100 (0x215d28fd24) (uint64) net.address = '00:21:5d:28:fd:24' (string) net.arp_proto_hw_id = 1 (0x1) (int) net.interface = 'wlan0' (string) net.linux.ifindex = 4 (0x4) (int) net.originating_device = '/org/freedesktop/Hal/devices/pci_8086_4232' (string) udi = '/org/freedesktop/Hal/devices/pci_8086_2940' info.linux.driver = 'pcieport-driver' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = '82801I (ICH9 Family) PCI Express Port 1' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_2940' (string) info.vendor = 'Intel Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.0' (string) pci.device_class = 6 (0x6) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 4 (0x4) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.0' (string) pci.product = '82801I (ICH9 Family) PCI Express Port 1' (string) pci.product_id = 10560 (0x2940) (int) pci.subsys_product_id = 0 (0x0) (int) pci.subsys_vendor_id = 0 (0x0) (int) pci.vendor = 'Intel Corporation' (string) pci.vendor_id = 32902 (0x8086) (int) udi = '/org/freedesktop/Hal/devices/pci_8086_293e' info.linux.driver = 'HDA Intel' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = '82801I (ICH9 Family) HD Audio Controller' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_293e' (string) info.vendor = 'Intel Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0' (string) pci.device_class = 4 (0x4) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 3 (0x3) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0' (string) pci.product = '82801I (ICH9 Family) HD Audio Controller' (string) pci.product_id = 10558 (0x293e) (int) pci.subsys_product_id = 36923 (0x903b) (int) pci.subsys_vendor = 'Sony Corporation' (string) pci.subsys_vendor_id = 4173 (0x104d) (int) pci.vendor = 'Intel Corporation' (string) pci.vendor_id = 32902 (0x8086) (int) udi = '/org/freedesktop/Hal/devices/pci_8086_293e_sound_card_0' info.capabilities = {'sound'} (string list) info.category = 'sound' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_293e' (string) info.product = 'HDA Intel Sound Card' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_293e_sound_card_0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0' (string) sound.card = 0 (0x0) (int) sound.card_id = 'HDA Intel' (string) sound.originating_device = '/org/freedesktop/Hal/devices/pci_8086_293e' (string) udi = '/org/freedesktop/Hal/devices/pci_8086_293e_sound_card_0_alsa_playback_0' access_control.file = '/dev/snd/pcmC0D0p' (string) access_control.type = 'sound' (string) alsa.card = 0 (0x0) (int) alsa.card_id = 'HDA Intel' (string) alsa.device = 0 (0x0) (int) alsa.device_file = '/dev/snd/pcmC0D0p' (string) alsa.device_id = 'ALC262 Analog' (string) alsa.originating_device = '/org/freedesktop/Hal/devices/pci_8086_293e_sound_card_0' (string) alsa.pcm_class = 'generic' (string) alsa.type = 'playback' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'alsa', 'access_control'} (string list) info.category = 'alsa' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_293e_sound_card_0' (string) info.product = 'ALC262 Analog ALSA Playback Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_293e_sound_card_0_alsa_playback_0' (string) linux.device_file = '/dev/snd/pcmC0D0p' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/pcmC0D0p' (string) udi = '/org/freedesktop/Hal/devices/pci_8086_293e_sound_card_0_alsa_capture_0' access_control.file = '/dev/snd/pcmC0D0c' (string) access_control.type = 'sound' (string) alsa.card = 0 (0x0) (int) alsa.card_id = 'HDA Intel' (string) alsa.device = 0 (0x0) (int) alsa.device_file = '/dev/snd/pcmC0D0c' (string) alsa.device_id = 'ALC262 Analog' (string) alsa.originating_device = '/org/freedesktop/Hal/devices/pci_8086_293e_sound_card_0' (string) alsa.pcm_class = 'generic' (string) alsa.type = 'capture' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'alsa', 'access_control'} (string list) info.category = 'alsa' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_293e_sound_card_0' (string) info.product = 'ALC262 Analog ALSA Capture Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_293e_sound_card_0_alsa_capture_0' (string) linux.device_file = '/dev/snd/pcmC0D0c' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/pcmC0D0c' (string) udi = '/org/freedesktop/Hal/devices/pci_8086_293e_sound_card_0_oss_mixer__1' access_control.file = '/dev/mixer' (string) access_control.type = 'sound' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'oss', 'access_control'} (string list) info.category = 'oss' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_293e_sound_card_0' (string) info.product = 'ALC262 Analog OSS Control Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_293e_sound_card_0_oss_mixer__1' (string) linux.device_file = '/dev/mixer' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/mixer' (string) oss.card = 0 (0x0) (int) oss.card_id = 'HDA Intel' (string) oss.device_file = '/dev/mixer' (string) oss.device_id = 'ALC262 Analog' (string) oss.originating_device = '/org/freedesktop/Hal/devices/pci_8086_293e_sound_card_0' (string) oss.type = 'mixer' (string) udi = '/org/freedesktop/Hal/devices/pci_8086_293e_sound_card_0_oss_pcm_0_0' access_control.file = '/dev/dsp' (string) access_control.type = 'sound' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'oss', 'access_control'} (string list) info.category = 'oss' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_293e_sound_card_0' (string) info.product = 'ALC262 Analog OSS PCM Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_293e_sound_card_0_oss_pcm_0_0' (string) linux.device_file = '/dev/dsp' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/dsp' (string) oss.card = 0 (0x0) (int) oss.card_id = 'HDA Intel' (string) oss.device = 0 (0x0) (int) oss.device_file = '/dev/dsp' (string) oss.device_id = 'ALC262 Analog' (string) oss.originating_device = '/org/freedesktop/Hal/devices/pci_8086_293e_sound_card_0' (string) oss.type = 'pcm' (string) udi = '/org/freedesktop/Hal/devices/pci_8086_293e_sound_card_0_alsa_control__1' access_control.file = '/dev/snd/controlC0' (string) access_control.type = 'sound' (string) alsa.card = 0 (0x0) (int) alsa.card_id = 'HDA Intel' (string) alsa.device_file = '/dev/snd/controlC0' (string) alsa.originating_device = '/org/freedesktop/Hal/devices/pci_8086_293e_sound_card_0' (string) alsa.type = 'control' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'alsa', 'access_control'} (string list) info.category = 'alsa' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_293e_sound_card_0' (string) info.product = 'HDA Intel ALSA Control Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_293e_sound_card_0_alsa_control__1' (string) linux.device_file = '/dev/snd/controlC0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/controlC0' (string) udi = '/org/freedesktop/Hal/devices/pci_8086_293e_sound_card_0_oss_pcm_0' access_control.file = '/dev/audio' (string) access_control.type = 'sound' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'oss', 'access_control'} (string list) info.category = 'oss' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_293e_sound_card_0' (string) info.product = 'ALC262 Analog OSS PCM Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_293e_sound_card_0_oss_pcm_0' (string) linux.device_file = '/dev/audio' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/audio' (string) oss.card = 0 (0x0) (int) oss.card_id = 'HDA Intel' (string) oss.device = 0 (0x0) (int) oss.device_file = '/dev/audio' (string) oss.device_id = 'ALC262 Analog' (string) oss.originating_device = '/org/freedesktop/Hal/devices/pci_8086_293e_sound_card_0' (string) oss.type = 'pcm' (string) udi = '/org/freedesktop/Hal/devices/pci_8086_293c' info.linux.driver = 'ehci_hcd' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = '82801I (ICH9 Family) USB2 EHCI Controller #2' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_293c' (string) info.vendor = 'Intel Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.7' (string) pci.device_class = 12 (0xc) (int) pci.device_protocol = 32 (0x20) (int) pci.device_subclass = 3 (0x3) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.7' (string) pci.product = '82801I (ICH9 Family) USB2 EHCI Controller #2' (string) pci.product_id = 10556 (0x293c) (int) pci.subsys_product_id = 36923 (0x903b) (int) pci.subsys_vendor = 'Sony Corporation' (string) pci.subsys_vendor_id = 4173 (0x104d) (int) pci.vendor = 'Intel Corporation' (string) pci.vendor_id = 32902 (0x8086) (int) udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1a_7' info.linux.driver = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_293c' (string) info.product = '2.0 root hub' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1a_7' (string) info.vendor = 'Linux Foundation' (string) linux.device_file = '/dev/bus/usb/003/001' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.7/usb3' (string) usb_device.bus_number = 3 (0x3) (int) usb_device.can_wake_up = true (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 9 (0x9) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.device_revision_bcd = 518 (0x206) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.is_self_powered = true (bool) usb_device.linux.device_number = 1 (0x1) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.7/usb3' (string) usb_device.max_power = 0 (0x0) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.num_ports = 4 (0x4) (int) usb_device.product = '2.0 root hub' (string) usb_device.product_id = 2 (0x2) (int) usb_device.serial = '0000:00:1a.7' (string) usb_device.speed = 480.0 (480) (double) usb_device.vendor = 'Linux Foundation' (string) usb_device.vendor_id = 7531 (0x1d6b) (int) usb_device.version = 2.0 (2) (double) udi = '/org/freedesktop/Hal/devices/usb_device_5ca_183f_noserial' info.linux.driver = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1a_7' (string) info.product = 'Unknown (0x183f)' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_5ca_183f_noserial' (string) info.vendor = 'Ricoh Co., Ltd' (string) linux.device_file = '/dev/bus/usb/003/003' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.7/usb3/3-2' (string) usb_device.bus_number = 3 (0x3) (int) usb_device.can_wake_up = false (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 239 (0xef) (int) usb_device.device_protocol = 1 (0x1) (int) usb_device.device_revision_bcd = 16388 (0x4004) (int) usb_device.device_subclass = 2 (0x2) (int) usb_device.is_self_powered = false (bool) usb_device.linux.device_number = 3 (0x3) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.7/usb3/3-2' (string) usb_device.max_power = 100 (0x64) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 2 (0x2) (int) usb_device.num_ports = 0 (0x0) (int) usb_device.product_id = 6207 (0x183f) (int) usb_device.speed = 480.0 (480) (double) usb_device.vendor = 'Ricoh Co., Ltd' (string) usb_device.vendor_id = 1482 (0x5ca) (int) usb_device.version = 2.0 (2) (double) udi = '/org/freedesktop/Hal/devices/usb_device_5ca_183f_noserial_if1' info.linux.driver = 'uvcvideo' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_5ca_183f_noserial' (string) info.product = 'USB Video Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_5ca_183f_noserial_if1' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.7/usb3/3-2/3-2:1.1' (string) usb.bus_number = 3 (0x3) (int) usb.can_wake_up = false (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 239 (0xef) (int) usb.device_protocol = 1 (0x1) (int) usb.device_revision_bcd = 16388 (0x4004) (int) usb.device_subclass = 2 (0x2) (int) usb.interface.class = 14 (0xe) (int) usb.interface.number = 1 (0x1) (int) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 2 (0x2) (int) usb.is_self_powered = false (bool) usb.linux.device_number = 3 (0x3) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.7/usb3/3-2/3-2:1.1' (string) usb.max_power = 100 (0x64) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 2 (0x2) (int) usb.num_ports = 0 (0x0) (int) usb.product = 'USB Video Interface' (string) usb.product_id = 6207 (0x183f) (int) usb.speed = 480.0 (480) (double) usb.vendor = 'Ricoh Co., Ltd' (string) usb.vendor_id = 1482 (0x5ca) (int) usb.version = 2.0 (2) (double) udi = '/org/freedesktop/Hal/devices/usb_device_5ca_183f_noserial_if0' info.linux.driver = 'uvcvideo' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_5ca_183f_noserial' (string) info.product = 'USB Video Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_5ca_183f_noserial_if0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.7/usb3/3-2/3-2:1.0' (string) usb.bus_number = 3 (0x3) (int) usb.can_wake_up = false (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 239 (0xef) (int) usb.device_protocol = 1 (0x1) (int) usb.device_revision_bcd = 16388 (0x4004) (int) usb.device_subclass = 2 (0x2) (int) usb.interface.class = 14 (0xe) (int) usb.interface.description = 'Sony Visual Communication Camera' (string) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 1 (0x1) (int) usb.is_self_powered = false (bool) usb.linux.device_number = 3 (0x3) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.7/usb3/3-2/3-2:1.0' (string) usb.max_power = 100 (0x64) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 2 (0x2) (int) usb.num_ports = 0 (0x0) (int) usb.product = 'USB Video Interface' (string) usb.product_id = 6207 (0x183f) (int) usb.speed = 480.0 (480) (double) usb.vendor = 'Ricoh Co., Ltd' (string) usb.vendor_id = 1482 (0x5ca) (int) usb.version = 2.0 (2) (double) udi = '/org/freedesktop/Hal/devices/usb_device_5ca_183f_noserial_if0_video4linux' access_control.file = '/dev/video0' (string) access_control.type = 'video4linux' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'video4linux', 'video4linux.video_capture', 'access_control'} (string list) info.category = 'video4linux' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_5ca_183f_noserial_if0' (string) info.product = 'UVC Camera (05ca:183f)' (string) info.subsystem = 'video4linux' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_5ca_183f_noserial_if0_video4linux' (string) linux.device_file = '/dev/video0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'video4linux' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.7/usb3/3-2/3-2:1.0/video4linux/video0' (string) video4linux.device = '/dev/video0' (string) video4linux.version = '1' (string) udi = '/org/freedesktop/Hal/devices/usb_device_5ca_183f_noserial_if0_logicaldev_input' button.has_state = false (bool) info.addons.singleton = {'hald-addon-input'} (string list) info.capabilities = {'input', 'button'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_5ca_183f_noserial_if0' (string) info.product = 'UVC Camera (05ca:183f)' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_5ca_183f_noserial_if0_logicaldev_input' (string) input.device = '/dev/input/event9' (string) input.originating_device = '/org/freedesktop/Hal/devices/usb_device_5ca_183f_noserial_if0' (string) input.product = 'UVC Camera (05ca:183f)' (string) linux.device_file = '/dev/input/event9' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.7/usb3/3-2/3-2:1.0/input/input9/event9' (string) udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1a_7_if0' info.linux.driver = 'hub' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1a_7' (string) info.product = 'USB Hub Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1a_7_if0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.7/usb3/3-0:1.0' (string) usb.bus_number = 3 (0x3) (int) usb.can_wake_up = true (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 9 (0x9) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 518 (0x206) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 9 (0x9) (int) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 0 (0x0) (int) usb.is_self_powered = true (bool) usb.linux.device_number = 1 (0x1) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.7/usb3/3-0:1.0' (string) usb.max_power = 0 (0x0) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.num_ports = 4 (0x4) (int) usb.product = 'USB Hub Interface' (string) usb.product_id = 2 (0x2) (int) usb.serial = '0000:00:1a.7' (string) usb.speed = 480.0 (480) (double) usb.vendor = 'Linux Foundation' (string) usb.vendor_id = 7531 (0x1d6b) (int) usb.version = 2.0 (2) (double) udi = '/org/freedesktop/Hal/devices/pci_8086_2938' info.linux.driver = 'uhci_hcd' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = '82801I (ICH9 Family) USB UHCI Controller #5' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_2938' (string) info.vendor = 'Intel Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.1' (string) pci.device_class = 12 (0xc) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 3 (0x3) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.1' (string) pci.product = '82801I (ICH9 Family) USB UHCI Controller #5' (string) pci.product_id = 10552 (0x2938) (int) pci.subsys_product_id = 36923 (0x903b) (int) pci.subsys_vendor = 'Sony Corporation' (string) pci.subsys_vendor_id = 4173 (0x104d) (int) pci.vendor = 'Intel Corporation' (string) pci.vendor_id = 32902 (0x8086) (int) udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1a_1' info.linux.driver = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_2938' (string) info.product = '1.1 root hub' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1a_1' (string) info.vendor = 'Linux Foundation' (string) linux.device_file = '/dev/bus/usb/002/001' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.1/usb2' (string) usb_device.bus_number = 2 (0x2) (int) usb_device.can_wake_up = true (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 9 (0x9) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.device_revision_bcd = 518 (0x206) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.is_self_powered = true (bool) usb_device.linux.device_number = 1 (0x1) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.1/usb2' (string) usb_device.max_power = 0 (0x0) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.num_ports = 2 (0x2) (int) usb_device.product = '1.1 root hub' (string) usb_device.product_id = 1 (0x1) (int) usb_device.serial = '0000:00:1a.1' (string) usb_device.speed = 12.0 (12) (double) usb_device.vendor = 'Linux Foundation' (string) usb_device.vendor_id = 7531 (0x1d6b) (int) usb_device.version = 1.1 (1.1) (double) udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1a_1_if0' info.linux.driver = 'hub' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1a_1' (string) info.product = 'USB Hub Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1a_1_if0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.1/usb2/2-0:1.0' (string) usb.bus_number = 2 (0x2) (int) usb.can_wake_up = true (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 9 (0x9) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 518 (0x206) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 9 (0x9) (int) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 0 (0x0) (int) usb.is_self_powered = true (bool) usb.linux.device_number = 1 (0x1) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.1/usb2/2-0:1.0' (string) usb.max_power = 0 (0x0) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.num_ports = 2 (0x2) (int) usb.product = 'USB Hub Interface' (string) usb.product_id = 1 (0x1) (int) usb.serial = '0000:00:1a.1' (string) usb.speed = 12.0 (12) (double) usb.vendor = 'Linux Foundation' (string) usb.vendor_id = 7531 (0x1d6b) (int) usb.version = 1.1 (1.1) (double) udi = '/org/freedesktop/Hal/devices/pci_8086_2937' info.linux.driver = 'uhci_hcd' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = '82801I (ICH9 Family) USB UHCI Controller #4' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_2937' (string) info.vendor = 'Intel Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.0' (string) pci.device_class = 12 (0xc) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 3 (0x3) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.0' (string) pci.product = '82801I (ICH9 Family) USB UHCI Controller #4' (string) pci.product_id = 10551 (0x2937) (int) pci.subsys_product_id = 36923 (0x903b) (int) pci.subsys_vendor = 'Sony Corporation' (string) pci.subsys_vendor_id = 4173 (0x104d) (int) pci.vendor = 'Intel Corporation' (string) pci.vendor_id = 32902 (0x8086) (int) udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1a_0' info.linux.driver = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_2937' (string) info.product = '1.1 root hub' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1a_0' (string) info.vendor = 'Linux Foundation' (string) linux.device_file = '/dev/bus/usb/001/001' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.0/usb1' (string) usb_device.bus_number = 1 (0x1) (int) usb_device.can_wake_up = true (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 9 (0x9) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.device_revision_bcd = 518 (0x206) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.is_self_powered = true (bool) usb_device.linux.device_number = 1 (0x1) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.0/usb1' (string) usb_device.max_power = 0 (0x0) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.num_ports = 2 (0x2) (int) usb_device.product = '1.1 root hub' (string) usb_device.product_id = 1 (0x1) (int) usb_device.serial = '0000:00:1a.0' (string) usb_device.speed = 12.0 (12) (double) usb_device.vendor = 'Linux Foundation' (string) usb_device.vendor_id = 7531 (0x1d6b) (int) usb_device.version = 1.1 (1.1) (double) udi = '/org/freedesktop/Hal/devices/usb_device_147e_1000_noserial' info.linux.driver = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1a_0' (string) info.product = 'Fingerprint Sensor' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_147e_1000_noserial' (string) info.vendor = 'TouchStrip' (string) linux.device_file = '/dev/bus/usb/001/003' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1' (string) usb_device.bus_number = 1 (0x1) (int) usb_device.can_wake_up = true (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 0 (0x0) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.device_revision_bcd = 51 (0x33) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.is_self_powered = false (bool) usb_device.linux.device_number = 3 (0x3) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1' (string) usb_device.max_power = 100 (0x64) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.num_ports = 0 (0x0) (int) usb_device.product = 'Fingerprint Sensor' (string) usb_device.product_id = 4096 (0x1000) (int) usb_device.speed = 12.0 (12) (double) usb_device.vendor = 'TouchStrip' (string) usb_device.vendor_id = 5246 (0x147e) (int) usb_device.version = 1.0 (1) (double) udi = '/org/freedesktop/Hal/devices/usb_device_147e_1000_noserial_if0' info.parent = '/org/freedesktop/Hal/devices/usb_device_147e_1000_noserial' (string) info.product = 'USB Vendor Specific Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_147e_1000_noserial_if0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1:1.0' (string) usb.bus_number = 1 (0x1) (int) usb.can_wake_up = true (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 0 (0x0) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 51 (0x33) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 255 (0xff) (int) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 0 (0x0) (int) usb.is_self_powered = false (bool) usb.linux.device_number = 3 (0x3) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1:1.0' (string) usb.max_power = 100 (0x64) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.num_ports = 0 (0x0) (int) usb.product = 'USB Vendor Specific Interface' (string) usb.product_id = 4096 (0x1000) (int) usb.speed = 12.0 (12) (double) usb.vendor = 'TouchStrip' (string) usb.vendor_id = 5246 (0x147e) (int) usb.version = 1.0 (1) (double) udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1a_0_if0' info.linux.driver = 'hub' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1a_0' (string) info.product = 'USB Hub Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1a_0_if0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-0:1.0' (string) usb.bus_number = 1 (0x1) (int) usb.can_wake_up = true (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 9 (0x9) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 518 (0x206) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 9 (0x9) (int) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 0 (0x0) (int) usb.is_self_powered = true (bool) usb.linux.device_number = 1 (0x1) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-0:1.0' (string) usb.max_power = 0 (0x0) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.num_ports = 2 (0x2) (int) usb.product = 'USB Hub Interface' (string) usb.product_id = 1 (0x1) (int) usb.serial = '0000:00:1a.0' (string) usb.speed = 12.0 (12) (double) usb.vendor = 'Linux Foundation' (string) usb.vendor_id = 7531 (0x1d6b) (int) usb.version = 1.1 (1.1) (double) udi = '/org/freedesktop/Hal/devices/pci_8086_10f5' info.linux.driver = 'e1000e' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = '82567LM Gigabit Network Connection' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_10f5' (string) info.vendor = 'Intel Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:19.0' (string) pci.device_class = 2 (0x2) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 0 (0x0) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:19.0' (string) pci.product = '82567LM Gigabit Network Connection' (string) pci.product_id = 4341 (0x10f5) (int) pci.subsys_product_id = 36923 (0x903b) (int) pci.subsys_vendor = 'Sony Corporation' (string) pci.subsys_vendor_id = 4173 (0x104d) (int) pci.vendor = 'Intel Corporation' (string) pci.vendor_id = 32902 (0x8086) (int) udi = '/org/freedesktop/Hal/devices/net_00_1a_80_e1_73_25' info.capabilities = {'net', 'net.80203', 'wake_on_lan'} (string list) info.category = 'net.80203' (string) info.interfaces = {'org.freedesktop.Hal.Device.WakeOnLan'} (string list) info.parent = '/org/freedesktop/Hal/devices/pci_8086_10f5' (string) info.product = 'Networking Interface' (string) info.subsystem = 'net' (string) info.udi = '/org/freedesktop/Hal/devices/net_00_1a_80_e1_73_25' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'net' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:19.0/net/eth0' (string) net.80203.mac_address = 113831408421 (0x1a80e17325) (uint64) net.address = '00:1a:80:e1:73:25' (string) net.arp_proto_hw_id = 1 (0x1) (int) net.interface = 'eth0' (string) net.linux.ifindex = 2 (0x2) (int) net.originating_device = '/org/freedesktop/Hal/devices/pci_8086_10f5' (string) org.freedesktop.Hal.Device.WakeOnLan.method_argnames = {'', '', 'enable'} (string list) org.freedesktop.Hal.Device.WakeOnLan.method_execpaths = {'hal-system-wol-supported', 'hal-system-wol-enabled', 'hal-system-wol-enable'} (string list) org.freedesktop.Hal.Device.WakeOnLan.method_names = {'GetSupported', 'GetEnabled', 'SetEnabled'} (string list) org.freedesktop.Hal.Device.WakeOnLan.method_signatures = {'', '', 'b'} (string list) udi = '/org/freedesktop/Hal/devices/pci_8086_2a43' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Mobile 4 Series Chipset Integrated Graphics Controller' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_2a43' (string) info.vendor = 'Intel Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1' (string) pci.device_class = 3 (0x3) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 128 (0x80) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1' (string) pci.product = 'Mobile 4 Series Chipset Integrated Graphics Controller' (string) pci.product_id = 10819 (0x2a43) (int) pci.subsys_product_id = 36923 (0x903b) (int) pci.subsys_vendor = 'Sony Corporation' (string) pci.subsys_vendor_id = 4173 (0x104d) (int) pci.vendor = 'Intel Corporation' (string) pci.vendor_id = 32902 (0x8086) (int) udi = '/org/freedesktop/Hal/devices/pci_8086_2a42' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Mobile 4 Series Chipset Integrated Graphics Controller' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_2a42' (string) info.vendor = 'Intel Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0' (string) pci.device_class = 3 (0x3) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 0 (0x0) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0' (string) pci.product = 'Mobile 4 Series Chipset Integrated Graphics Controller' (string) pci.product_id = 10818 (0x2a42) (int) pci.subsys_product_id = 36923 (0x903b) (int) pci.subsys_vendor = 'Sony Corporation' (string) pci.subsys_vendor_id = 4173 (0x104d) (int) pci.vendor = 'Intel Corporation' (string) pci.vendor_id = 32902 (0x8086) (int) udi = '/org/freedesktop/Hal/devices/pci_8086_2a42_drm_i915_card0' drm.dri_library = 'i915' (string) info.capabilities = {'drm'} (string list) info.category = 'drm' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_2a42' (string) info.product = 'Direct Rendering Manager Device' (string) info.subsystem = 'drm' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_2a42_drm_i915_card0' (string) info.vendor = 'Intel Corporation' (string) linux.device_file = '/dev/dri/card0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'drm' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0/drm/card0' (string) udi = '/org/freedesktop/Hal/devices/pci_8086_2a40' info.linux.driver = 'agpgart-intel' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Mobile 4 Series Chipset Memory Controller Hub' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_2a40' (string) info.vendor = 'Intel Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.0' (string) pci.device_class = 6 (0x6) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 0 (0x0) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.0' (string) pci.product = 'Mobile 4 Series Chipset Memory Controller Hub' (string) pci.product_id = 10816 (0x2a40) (int) pci.subsys_product_id = 36923 (0x903b) (int) pci.subsys_vendor = 'Sony Corporation' (string) pci.subsys_vendor_id = 4173 (0x104d) (int) pci.vendor = 'Intel Corporation' (string) pci.vendor_id = 32902 (0x8086) (int) udi = '/org/freedesktop/Hal/devices/fuse' access_control.file = '/dev/fuse' (string) access_control.type = 'camera' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'access_control'} (string list) info.parent = '/org/freedesktop/Hal/devices/pci_8086_2a40' (string) info.subsystem = 'unknown' (string) info.udi = '/org/freedesktop/Hal/devices/fuse' (string) Dumped 124 device(s) from the Global Device List. ------------------------------------------------