[ 0.000000] Linux version 2.6.24-16-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Thu Apr 10 13:23:42 UTC 2008 (Ubuntu 2.6.24-16.30-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007fe93400 (usable) [ 0.000000] BIOS-e820: 000000007fe93400 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4007000 (reserved) [ 0.000000] BIOS-e820: 00000000f4008000 - 00000000f400c000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) [ 0.000000] 1150MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] Entering add_active_range(0, 0, 523923) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 523923 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 523923 [ 0.000000] On node 0 totalpages: 523923 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2301 pages used for memmap [ 0.000000] HighMem zone: 292246 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI 2.4 present. [ 0.000000] ACPI: RSDP signature @ 0xC00FC1D0 checksum 0 [ 0.000000] ACPI: RSDP 000FC1D0, 0014 (r0 DELL ) [ 0.000000] ACPI: RSDT 7FE93A0F, 0040 (r1 DELL M07 27D70402 ASL 61) [ 0.000000] ACPI: FACP 7FE94800, 0074 (r1 DELL M07 27D70402 ASL 61) [ 0.000000] ACPI: DSDT 7FE95400, 4766 (r1 INT430 SYSFexxx 1001 INTL 20050624) [ 0.000000] ACPI: FACS 7FEA3C00, 0040 [ 0.000000] ACPI: HPET 7FE94F00, 0038 (r1 DELL M07 1 ASL 61) [ 0.000000] ACPI: APIC 7FE95000, 0068 (r1 DELL M07 27D70402 ASL 47) [ 0.000000] ACPI: MCFG 7FE94FC0, 003E (r16 DELL M07 27D70402 ASL 61) [ 0.000000] ACPI: SLIC 7FE9509C, 0176 (r1 DELL M07 27D70402 ASL 61) [ 0.000000] ACPI: BOOT 7FE94BC0, 0028 (r1 DELL M07 27D70402 ASL 61) [ 0.000000] ACPI: SSDT 7FE93A4F, 04DC (r1 PmRef CpuPm 3000 INTL 20050624) [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:70000000) [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 0000000000100000 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519830 [ 0.000000] Kernel command line: root=UUID=211bd26e-3930-4490-a31e-d3c3d9110e2d ro quiet splash [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 1664.468 MHz processor. [ 9.004954] Console: colour VGA+ 80x25 [ 9.004960] console [tty0] enabled [ 9.005277] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 9.005707] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 9.162404] Memory: 2065732k/2095692k available (2157k kernel code, 28636k reserved, 998k data, 364k init, 1178188k highmem) [ 9.162415] virtual kernel memory layout: [ 9.162417] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB) [ 9.162419] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 9.162421] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 9.162423] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 9.162425] .init : 0xc041b000 - 0xc0476000 ( 364 kB) [ 9.162426] .data : 0xc031b5a4 - 0xc0414dc4 ( 998 kB) [ 9.162428] .text : 0xc0100000 - 0xc031b5a4 (2157 kB) [ 9.162433] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 9.162491] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 9.162649] hpet clockevent registered [ 9.242628] Calibrating delay using timer specific routine.. 3333.40 BogoMIPS (lpj=6666804) [ 9.242661] Security Framework initialized [ 9.242669] SELinux: Disabled at boot. [ 9.242688] AppArmor: AppArmor initialized [ 9.242695] Failure registering capabilities with primary security module. [ 9.242708] Mount-cache hash table entries: 512 [ 9.242894] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000000 [ 9.242907] monitor/mwait feature present. [ 9.242910] using mwait in idle threads. [ 9.242916] CPU: L1 I cache: 32K, L1 D cache: 32K [ 9.242920] CPU: L2 cache: 2048K [ 9.242924] CPU: Physical Processor ID: 0 [ 9.242926] CPU: Processor Core ID: 0 [ 9.242929] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000000 [ 9.242944] Compat vDSO mapped to ffffe000. [ 9.242964] Checking 'hlt' instruction... OK. [ 9.259228] SMP alternatives: switching to UP code [ 9.261856] Early unpacking initramfs... done [ 9.825941] ACPI: Core revision 20070126 [ 9.826002] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 9.829754] CPU0: Intel(R) Core(TM)2 CPU T5500 @ 1.66GHz stepping 02 [ 9.829777] SMP alternatives: switching to SMP code [ 9.831668] Booting processor 1/1 eip 3000 [ 11.986609] Initializing CPU#1 [ 12.066941] Calibrating delay using timer specific routine.. 3328.95 BogoMIPS (lpj=6657904) [ 12.066952] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000000 [ 12.066960] monitor/mwait feature present. [ 12.066965] CPU: L1 I cache: 32K, L1 D cache: 32K [ 12.066968] CPU: L2 cache: 2048K [ 12.066971] CPU: Physical Processor ID: 0 [ 12.066973] CPU: Processor Core ID: 1 [ 12.066975] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000000 [ 9.923269] CPU1: Intel(R) Core(TM)2 CPU T5500 @ 1.66GHz stepping 02 [ 9.923300] Total of 2 processors activated (6662.35 BogoMIPS). [ 9.923506] ENABLING IO-APIC IRQs [ 9.923718] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 10.070473] checking TSC synchronization [CPU#0 -> CPU#1]: [ 10.090477] Measured 3570797620 cycles TSC warp between CPUs, turning off TSC clock. [ 10.090482] Marking TSC unstable due to: check_tsc_sync_source failed. [ 10.090499] Brought up 2 CPUs [ 10.090533] CPU0 attaching sched-domain: [ 10.090537] domain 0: span 03 [ 10.090540] groups: 01 02 [ 10.090545] CPU1 attaching sched-domain: [ 10.090548] domain 0: span 03 [ 10.090550] groups: 02 01 [ 12.235485] net_namespace: 64 bytes [ 12.235501] Booting paravirtualized kernel on bare hardware [ 12.236289] Time: 18:12:43 Date: 03/22/88 [ 12.236330] NET: Registered protocol family 16 [ 12.236666] EISA bus registered [ 12.236673] ACPI: bus type pci registered [ 12.265618] PCI: PCI BIOS revision 2.10 entry at 0xfb336, last bus=14 [ 12.265622] PCI: Using configuration type 1 [ 12.265625] Setting up standard PCI resources [ 10.129873] ACPI: EC: Look up EC in DSDT [ 10.137089] ACPI: Interpreter enabled [ 10.137095] ACPI: (supports S0 S3 S4 S5) [ 10.137117] ACPI: Using IOAPIC for interrupt routing [ 10.158561] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 10.159573] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 10.159580] PCI quirk: region 1080-10bf claimed by ICH6 GPIO [ 10.161354] PCI: Transparent bridge - 0000:00:1e.0 [ 10.161415] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 10.162078] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 10.162236] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] [ 10.162454] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 10.162643] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 10.162829] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] [ 10.176381] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 11) *4 [ 10.176559] ACPI: PCI Interrupt Link [LNKB] (IRQs *5 7) [ 10.176733] ACPI: PCI Interrupt Link [LNKC] (IRQs *9 10 11) [ 10.176905] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 11) *3 [ 10.177080] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 10.177257] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 10.177434] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 10.177611] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 9 10 11 12 14 15) [ 10.177860] Linux Plug and Play Support v0.97 (c) Adam Belay [ 10.177913] pnp: PnP ACPI init [ 10.177926] ACPI: bus type pnp registered [ 10.205206] pnpacpi: exceeded the max number of mem resources: 12 [ 10.226909] pnp: PnP ACPI: found 12 devices [ 10.226913] ACPI: ACPI bus type pnp unregistered [ 10.226919] PnPBIOS: Disabled by ACPI PNP [ 12.371880] PCI: Using ACPI for IRQ routing [ 12.371885] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 12.466983] NET: Registered protocol family 8 [ 12.466986] NET: Registered protocol family 20 [ 12.467041] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 12.467049] hpet0: 3 64-bit timers, 14318180 Hz [ 12.468099] AppArmor: AppArmor Filesystem Enabled [ 10.326228] Time: hpet clocksource has been installed. [ 10.326250] Switched to high resolution mode on CPU 0 [ 12.470980] Switched to high resolution mode on CPU 1 [ 10.339236] system 00:00: iomem range 0x0-0x9fbff could not be reserved [ 10.339242] system 00:00: iomem range 0x9fc00-0x9ffff could not be reserved [ 10.339247] system 00:00: iomem range 0xc0000-0xcffff could not be reserved [ 10.339251] system 00:00: iomem range 0xe0000-0xfffff could not be reserved [ 10.339256] system 00:00: iomem range 0x100000-0x7fe933ff could not be reserved [ 10.339261] system 00:00: iomem range 0x7fe93400-0x7fefffff could not be reserved [ 10.339265] system 00:00: iomem range 0x7ff00000-0x7fffffff could not be reserved [ 10.339270] system 00:00: iomem range 0xffb00000-0xffffffff could not be reserved [ 10.339275] system 00:00: iomem range 0xfec00000-0xfec0ffff could not be reserved [ 10.339280] system 00:00: iomem range 0xfee00000-0xfee0ffff could not be reserved [ 10.339285] system 00:00: iomem range 0xfed20000-0xfed9ffff could not be reserved [ 10.339290] system 00:00: iomem range 0xffa80000-0xffa83fff could not be reserved [ 10.339302] system 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 10.339307] system 00:02: ioport range 0x1000-0x1005 has been reserved [ 10.339311] system 00:02: ioport range 0x1008-0x100f has been reserved [ 10.339321] system 00:03: ioport range 0xf400-0xf4fe has been reserved [ 10.339326] system 00:03: ioport range 0x1006-0x1007 has been reserved [ 10.339330] system 00:03: ioport range 0x100a-0x1059 could not be reserved [ 10.339335] system 00:03: ioport range 0x1060-0x107f has been reserved [ 10.339339] system 00:03: ioport range 0x1080-0x10bf has been reserved [ 10.339344] system 00:03: ioport range 0x10c0-0x10df has been reserved [ 10.339348] system 00:03: ioport range 0x1010-0x102f has been reserved [ 10.339352] system 00:03: ioport range 0x809-0x809 has been reserved [ 10.339372] system 00:08: ioport range 0xc80-0xcff could not be reserved [ 10.339376] system 00:08: ioport range 0x910-0x91f has been reserved [ 10.339381] system 00:08: ioport range 0x920-0x92f has been reserved [ 10.339385] system 00:08: ioport range 0xcb0-0xcbf has been reserved [ 10.339389] system 00:08: ioport range 0x930-0x97f has been reserved [ 10.339402] system 00:0b: iomem range 0xfed00000-0xfed003ff has been reserved [ 10.370136] PCI: Bridge: 0000:00:01.0 [ 10.370139] IO window: disabled. [ 10.370144] MEM window: ed000000-efefffff [ 10.370158] PREFETCH window: d0000000-dfffffff [ 10.370163] PCI: Bridge: 0000:00:1c.0 [ 10.370166] IO window: disabled. [ 10.370173] MEM window: disabled. [ 10.370179] PREFETCH window: disabled. [ 10.370186] PCI: Bridge: 0000:00:1c.1 [ 10.370188] IO window: disabled. [ 10.370196] MEM window: ecf00000-ecffffff [ 10.370202] PREFETCH window: disabled. [ 10.370210] PCI: Bridge: 0000:00:1c.3 [ 10.370214] IO window: e000-efff [ 10.370222] MEM window: ecc00000-ecefffff [ 10.370229] PREFETCH window: e0000000-e01fffff [ 10.370237] PCI: Bridge: 0000:00:1e.0 [ 10.370240] IO window: disabled. [ 10.370248] MEM window: ecb00000-ecbfffff [ 10.370253] PREFETCH window: disabled. [ 10.370279] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 10.370288] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 10.370317] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 10.370326] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 10.370358] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 10.370366] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 10.370398] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 18 [ 10.370406] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 10.370425] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 10.370442] NET: Registered protocol family 2 [ 10.418226] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 10.418575] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 10.419249] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 10.419561] TCP: Hash tables configured (established 131072 bind 65536) [ 10.419565] TCP reno registered [ 10.430341] checking if image is initramfs... it is [ 11.543997] Freeing initrd memory: 7286k freed [ 11.544203] Simple Boot Flag at 0x79 set to 0x1 [ 13.689841] audit: initializing netlink socket (disabled) [ 13.689858] audit(575057563.256:1): initialized [ 11.545617] highmem bounce pool size: 64 pages [ 11.549113] VFS: Disk quotas dquot_6.5.1 [ 11.549236] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 11.549445] io scheduler noop registered [ 11.549448] io scheduler anticipatory registered [ 11.549451] io scheduler deadline registered [ 11.549469] io scheduler cfq registered (default) [ 11.549605] Boot video device is 0000:01:00.0 [ 11.549788] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 11.549847] assign_interrupt_mode Found MSI capability [ 11.549895] Allocate Port Service[0000:00:01.0:pcie00] [ 11.550025] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 11.550100] assign_interrupt_mode Found MSI capability [ 11.550160] Allocate Port Service[0000:00:1c.0:pcie00] [ 11.550219] Allocate Port Service[0000:00:1c.0:pcie02] [ 11.550365] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 11.550439] assign_interrupt_mode Found MSI capability [ 11.550499] Allocate Port Service[0000:00:1c.1:pcie00] [ 11.550555] Allocate Port Service[0000:00:1c.1:pcie02] [ 11.550701] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 11.550776] assign_interrupt_mode Found MSI capability [ 11.550836] Allocate Port Service[0000:00:1c.3:pcie00] [ 11.550900] Allocate Port Service[0000:00:1c.3:pcie02] [ 11.551326] isapnp: Scanning for PnP cards... [ 11.906466] isapnp: No Plug & Play device found [ 11.950746] Real Time Clock Driver v1.12ac [ 11.950970] hpet_resources: 0xfed00000 is busy [ 11.951045] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 11.952984] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 11.953097] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 11.953260] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 11.956282] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 11.956289] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 11.973632] mice: PS/2 mouse device common for all mice [ 11.973827] EISA: Probing bus 0 at eisa.0 [ 11.973901] EISA: Mainboard GO_FFFF detected. [ 11.973963] Cannot allocate resource for EISA slot 1 [ 11.974014] EISA: Detected 0 cards. [ 11.974019] cpuidle: using governor ladder [ 11.974022] cpuidle: using governor menu [ 11.974146] NET: Registered protocol family 1 [ 11.974188] Using IPI No-Shortcut mode [ 11.974229] registered taskstats version 1 [ 11.974396] Magic number: 0:716:241 [ 11.974400] hash matches /build/buildd/linux-2.6.24/drivers/base/power/main.c:97 [ 11.974422] hash matches device ttyse [ 11.974503] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 11.974506] EDD information not available. [ 11.974712] Freeing unused kernel memory: 364k freed [ 14.121410] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 13.328510] fuse init (API version 7.9) [ 13.362567] ACPI: SSDT 7FE94176, 0202 (r1 PmRef Cpu0Ist 3000 INTL 20050624) [ 13.362872] ACPI: SSDT 7FE93F2B, 01C6 (r1 PmRef Cpu0Cst 3001 INTL 20050624) [ 13.363751] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 13.363759] ACPI: Processor [CPU0] (supports 8 throttling states) [ 13.364110] ACPI: SSDT 7FE94378, 00C4 (r1 PmRef Cpu1Ist 3000 INTL 20050624) [ 13.364391] ACPI: SSDT 7FE940F1, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624) [ 15.509983] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 15.509992] ACPI: Processor [CPU1] (supports 8 throttling states) [ 15.517740] ACPI: Thermal Zone [THM] (47 C) [ 13.976783] usbcore: registered new interface driver usbfs [ 13.976825] usbcore: registered new interface driver hub [ 13.976875] usbcore: registered new device driver usb [ 13.998718] USB Universal Host Controller Interface driver v3.0 [ 13.998796] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 19 [ 13.998813] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 13.998820] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 13.999111] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 13.999153] uhci_hcd 0000:00:1d.0: irq 19, io base 0x0000bf80 [ 13.999363] usb usb1: configuration #1 chosen from 1 choice [ 13.999405] hub 1-0:1.0: USB hub found [ 13.999413] hub 1-0:1.0: 2 ports detected [ 14.042039] SCSI subsystem initialized [ 14.100765] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 20 [ 14.100783] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 14.100789] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 14.100828] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 14.100868] uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000bf60 [ 14.101050] usb usb2: configuration #1 chosen from 1 choice [ 14.101091] hub 2-0:1.0: USB hub found [ 14.101099] hub 2-0:1.0: 2 ports detected [ 14.101162] libata version 3.00 loaded. [ 14.204720] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 22 (level, low) -> IRQ 21 [ 14.204737] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 14.204744] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 14.204781] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 14.204821] uhci_hcd 0000:00:1d.2: irq 21, io base 0x0000bf40 [ 14.205014] usb usb3: configuration #1 chosen from 1 choice [ 14.205056] hub 3-0:1.0: USB hub found [ 14.205064] hub 3-0:1.0: 2 ports detected [ 14.308697] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 23 (level, low) -> IRQ 22 [ 14.308715] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 14.308722] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 14.308760] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 14.308800] uhci_hcd 0000:00:1d.3: irq 22, io base 0x0000bf20 [ 14.308983] usb usb4: configuration #1 chosen from 1 choice [ 14.309023] hub 4-0:1.0: USB hub found [ 14.309031] hub 4-0:1.0: 2 ports detected [ 14.412829] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 19 [ 14.412849] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 14.412855] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 14.412896] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 14.416814] ehci_hcd 0000:00:1d.7: debug port 1 [ 14.416823] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 14.416833] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xffa80000 [ 14.444494] usb 2-1: new full speed USB device using uhci_hcd and address 2 [ 14.456482] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 14.456695] usb usb5: configuration #1 chosen from 1 choice [ 14.456738] hub 5-0:1.0: USB hub found [ 14.456747] hub 5-0:1.0: 8 ports detected [ 16.707500] ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 19 (level, low) -> IRQ 18 [ 16.760253] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18] MMIO=[ecbfd800-ecbfdfff] Max Packet=[2048] IR/IT contexts=[4/4] [ 14.620636] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17 [ 14.620687] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 14.620706] ACPI: PCI interrupt for device 0000:00:1f.2 disabled [ 16.765340] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 14.680486] ssb: Sonics Silicon Backplane found on PCI device 0000:03:00.0 [ 14.680537] b44.c:v2.0 [ 14.680571] ata_piix 0000:00:1f.2: version 2.12 [ 14.680579] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] [ 14.680607] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17 [ 14.680653] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 14.683148] scsi0 : ata_piix [ 14.684110] scsi1 : ata_piix [ 14.685387] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xbfa0 irq 14 [ 14.685392] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xbfa8 irq 15 [ 14.700871] eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:18:8b:dc:42:24 [ 14.848835] ata1.00: ATA-7: TOSHIBA MK1637GSX, DL040D, max UDMA/100 [ 14.848844] ata1.00: 312581808 sectors, multi 8: LBA48 NCQ (depth 0/32) [ 14.856859] ata1.00: configured for UDMA/100 [ 15.003749] usb 5-5: new high speed USB device using ehci_hcd and address 3 [ 17.160864] ata2.00: ATAPI: Optiarc DVD+/-RW AD-5540A, 103C, max UDMA/33 [ 15.123662] Clocksource tsc unstable (delta = -160592490 ns) [ 17.332695] ata2.00: configured for UDMA/33 [ 15.188393] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1637GS DL04 PQ: 0 ANSI: 5 [ 15.189560] scsi 1:0:0:0: CD-ROM Optiarc DVD+-RW AD-5540A 103C PQ: 0 ANSI: 5 [ 15.201668] Driver 'sd' needs updating - please use bus_type methods [ 15.201784] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [ 15.201804] sd 0:0:0:0: [sda] Write Protect is off [ 15.201808] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 15.201836] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 15.201906] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [ 15.201923] sd 0:0:0:0: [sda] Write Protect is off [ 15.201927] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 15.201955] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 15.201960] sda:<4>Driver 'sr' needs updating - please use bus_type methods [ 15.229633] sda1 sda2 < sda5 > [ 15.258012] sd 0:0:0:0: [sda] Attached SCSI disk [ 17.407388] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 17.407394] Uniform CD-ROM driver Revision: 3.20 [ 17.407474] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 15.267683] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 15.267716] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 15.318693] usb 5-5: configuration #1 chosen from 1 choice [ 15.489344] Attempting manual resume [ 15.489350] swsusp: Resume From Partition 8:5 [ 15.489352] PM: Checking swsusp image. [ 15.489614] PM: Resume from disk failed. [ 17.654735] EXT3-fs: INFO: recovery required on readonly filesystem. [ 17.654742] EXT3-fs: write access will be enabled during recovery. [ 15.555517] usb 2-1: new full speed USB device using uhci_hcd and address 3 [ 15.730044] usb 2-1: configuration #1 chosen from 1 choice [ 15.731539] ieee1394: Host added: ID:BUS[0-00:1023] GUID[484fc00003d7d838] [ 15.732887] hub 2-1:1.0: USB hub found [ 17.879412] hub 2-1:1.0: 3 ports detected [ 16.048768] usb 2-1.1: new full speed USB device using uhci_hcd and address 4 [ 18.317492] usb 2-1.1: configuration #1 chosen from 1 choice [ 16.380762] usb 2-1.2: new full speed USB device using uhci_hcd and address 5 [ 16.510791] usb 2-1.2: configuration #1 chosen from 1 choice [ 16.716557] usb 2-1.3: new full speed USB device using uhci_hcd and address 6 [ 16.848687] usb 2-1.3: configuration #1 chosen from 1 choice [ 16.852489] usbcore: registered new interface driver hiddev [ 19.000412] input: Broadcom Corp as /devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1.2/2-1.2:1.0/input/input2 [ 19.020606] input,hidraw0: USB HID v1.11 Keyboard [Broadcom Corp] on usb-0000:00:1d.1-1.2 [ 16.880963] input: Broadcom Corp as /devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1.3/2-1.3:1.0/input/input3 [ 16.895050] input,hidraw1: USB HID v1.11 Mouse [Broadcom Corp] on usb-0000:00:1d.1-1.3 [ 16.895080] usbcore: registered new interface driver usbhid [ 16.895558] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 21.807593] kjournald starting. Commit interval 5 seconds [ 19.663066] EXT3-fs: sda1: orphan cleanup on readonly fs [ 19.663077] ext3_orphan_cleanup: deleting unreferenced inode 6391052 [ 19.663135] ext3_orphan_cleanup: deleting unreferenced inode 6390342 [ 19.663151] ext3_orphan_cleanup: deleting unreferenced inode 9454461 [ 19.663194] ext3_orphan_cleanup: deleting unreferenced inode 9469312 [ 19.663223] ext3_orphan_cleanup: deleting unreferenced inode 6391073 [ 19.663248] ext3_orphan_cleanup: deleting unreferenced inode 1343510 [ 19.663263] EXT3-fs: sda1: 6 orphan inodes deleted [ 19.663266] EXT3-fs: recovery complete. [ 19.808580] EXT3-fs: mounted filesystem with ordered data mode. [ 35.885054] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 35.935439] Linux agpgart interface v0.102 [ 36.075675] intel_rng: FWH not detected [ 36.103395] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 34.331041] input: PC Speaker as /devices/platform/pcspkr/input/input4 [ 34.372518] iTCO_vendor_support: vendor-support=0 [ 34.445537] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) [ 34.445675] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060) [ 34.445730] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 36.766086] ricoh-mmc: Ricoh MMC Controller disabling driver [ 36.766091] ricoh-mmc: Copyright(c) Philip Langdale [ 36.766149] ricoh-mmc: Ricoh MMC controller found at 0000:03:01.2 [1180:0843] (rev 1) [ 36.766165] ricoh-mmc: Controller is now disabled. [ 36.787917] input: Lid Switch as /devices/virtual/input/input5 [ 36.788477] ACPI: Lid Switch [LID] [ 36.788561] input: Power Button (CM) as /devices/virtual/input/input6 [ 36.814973] ACPI: Power Button (CM) [PBTN] [ 36.815087] input: Sleep Button (CM) as /devices/virtual/input/input7 [ 36.846960] ACPI: Sleep Button (CM) [SBTN] [ 36.887213] sdhci: Secure Digital Host Controller Interface driver [ 36.887218] sdhci: Copyright(c) Pierre Ossman [ 36.887276] sdhci: SDHCI controller found at 0000:03:01.1 [1180:0822] (rev 19) [ 36.887304] ACPI: PCI Interrupt 0000:03:01.1[B] -> GSI 18 (level, low) -> IRQ 23 [ 36.887389] mmc0: SDHCI at 0xecbfd400 irq 23 DMA [ 36.984126] ACPI: Battery Slot [BAT0] (battery present) [ 34.878376] ACPI: WMI-Acer: Mapper loaded [ 34.907490] ACPI: AC Adapter [AC] (off-line) [ 37.526722] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.0 [ 37.526730] iwl3945: Copyright(c) 2003-2007 Intel Corporation [ 37.526906] ACPI: PCI Interrupt 0000:0c:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 37.526925] PCI: Setting latency timer of device 0000:0c:00.0 to 64 [ 37.526949] iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection [ 35.420169] nvidia: module license 'NVIDIA' taints kernel. [ 36.109377] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:21/LNXVIDEO:00/input/input8 [ 36.132792] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 36.143943] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:01/input/input9 [ 36.164771] ACPI: Video Device [VID1] (multi-head: yes rom: no post: no) [ 36.165059] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:02/input/input10 [ 36.193163] ACPI: Video Device [VID2] (multi-head: yes rom: no post: no) [ 36.859235] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x81a0b1, caps: 0xa04713/0x200000 [ 36.892574] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input11 [ 37.356311] Linux video capture interface: v2.00 [ 37.441531] Bluetooth: Core ver 2.11 [ 37.477692] NET: Registered protocol family 31 [ 37.477697] Bluetooth: HCI device and connection manager initialized [ 37.477703] Bluetooth: HCI socket layer initialized [ 37.764713] uvcvideo: Found UVC 1.00 device (046d:08c6) [ 39.957295] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 37.816311] usbcore: registered new interface driver uvcvideo [ 37.816318] USB Video Class driver (v0.1.0) [ 37.829499] Bluetooth: HCI USB driver ver 2.9 [ 37.831859] usbcore: registered new interface driver hci_usb [ 38.051104] usbcore: registered new interface driver snd-usb-audio [ 38.935661] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 38.935692] PCI: Setting latency timer of device 0000:01:00.0 to 64 [ 38.935842] NVRM: loading NVIDIA UNIX x86 Kernel Module 169.12 Thu Feb 14 17:53:07 PST 2008 [ 38.938808] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 20 [ 38.938837] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 39.003476] iwl3945: Tunable channels: 13 802.11bg, 4 802.11a channels [ 39.013875] wmaster0: Selected rate control algorithm 'iwl-3945-rs' [ 41.623810] udev: renamed network interface wlan0 to eth1 [ 39.764746] lp: driver loaded but no devices found [ 40.079399] Adding 6072528k swap on /dev/sda5. Priority:-1 extents:1 across:6072528k [ 40.123436] EXT3 FS on sda1, internal journal [ 42.635526] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/sound/alsa-driver/pci/hda/../../alsa-kernel/pci/hda/hda_intel.c:593: hda_intel: azx_get_response timeout, switching to polling mode: last cmd=0x001f0012 [ 41.189597] ip_tables: (C) 2000-2006 Netfilter Core Team [ 41.249568] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 42.644407] No dock devices found. [ 45.768142] NET: Registered protocol family 10 [ 45.768466] lo: Disabled Privacy Extensions [ 45.770066] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 45.770639] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 46.296004] ppdev: user-space parallel port driver [ 46.721014] audit(575057599.189:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5614 profile="/usr/sbin/cupsd" namespace="default" [ 53.884223] apm: BIOS not found. [ 57.389183] Bluetooth: L2CAP ver 2.9 [ 57.389190] Bluetooth: L2CAP socket layer initialized [ 57.543542] Bluetooth: RFCOMM socket layer initialized [ 57.543559] Bluetooth: RFCOMM TTY layer initialized [ 57.543562] Bluetooth: RFCOMM ver 1.8