[ 0.000000] Linux version 2.6.22-12-generic (buildd@vernadsky) (gcc version 4.1.3 20070831 (prerelease) (Ubuntu 4.1.2-16ubuntu1)) #1 SMP Sun Sep 23 18:11:30 GMT 2007 (Ubuntu 2.6.22-12.39-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000001f7d0000 (usable) [ 0.000000] BIOS-e820: 000000001f7d0000 - 000000001f7e0000 (reserved) [ 0.000000] BIOS-e820: 000000001f7e0000 - 000000001f7e8000 (ACPI data) [ 0.000000] BIOS-e820: 000000001f7e8000 - 000000001f800000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000001f800000 - 0000000020000000 (reserved) [ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 503MB LOWMEM available. [ 0.000000] Entering add_active_range(0, 0, 128976) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 128976 [ 0.000000] HighMem 128976 -> 128976 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 128976 [ 0.000000] On node 0 totalpages: 128976 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 975 pages used for memmap [ 0.000000] Normal zone: 123905 pages, LIFO batch:31 [ 0.000000] HighMem zone: 0 pages used for memmap [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP 000FE030, 0014 (r0 IBM ) [ 0.000000] ACPI: RSDT 1F7E0000, 002C (r1 IBM Cnote2 3040 IBM 1) [ 0.000000] ACPI: FACP 1F7E0054, 0074 (r1 IBM Cnote2 3040 IBM 1) [ 0.000000] ACPI: DSDT 1F7E00CC, 5C71 (r1 IBM CNOTE2 3040 MSFT 100000C) [ 0.000000] ACPI: FACS 1F7E8000, 0040 [ 0.000000] ACPI: BOOT 1F7E002C, 0028 (r1 IBM Cnote2 3040 IBM 1) [ 0.000000] ACPI: PM-Timer IO Port: 0xf108 [ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:dfff0000) [ 0.000000] Built 1 zonelists. Total pages: 127969 [ 0.000000] Kernel command line: root=UUID=26d967bb-6a71-43d1-a294-9c8480c8b6e1 ro quiet splash i8042.nomux=1 [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic" [ 0.000000] mapped APIC to ffffd000 (013fd000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes) [ 0.000000] Detected 1196.161 MHz processor. [ 15.829983] Console: colour VGA+ 80x25 [ 15.830519] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 15.831529] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 15.861914] Memory: 499852k/515904k available (2017k kernel code, 15384k reserved, 918k data, 364k init, 0k highmem) [ 15.861932] virtual kernel memory layout: [ 15.861934] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB) [ 15.861937] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 15.861940] vmalloc : 0xe0000000 - 0xff7fe000 ( 503 MB) [ 15.861942] lowmem : 0xc0000000 - 0xdf7d0000 ( 503 MB) [ 15.861944] .init : 0xc03e3000 - 0xc043e000 ( 364 kB) [ 15.861947] .data : 0xc02f8456 - 0xc03ddea4 ( 918 kB) [ 15.861949] .text : 0xc0100000 - 0xc02f8456 (2017 kB) [ 15.861955] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 15.862028] SLUB: Genslabs=22, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 [ 15.942053] Calibrating delay using timer specific routine.. 2394.14 BogoMIPS (lpj=4788285) [ 15.942100] Security Framework v1.0.0 initialized [ 15.942115] SELinux: Disabled at boot. [ 15.942143] Mount-cache hash table entries: 512 [ 15.942370] CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000 [ 15.942389] CPU: L1 I cache: 16K, L1 D cache: 16K [ 15.942393] CPU: L2 cache: 256K [ 15.942398] CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000 [ 15.942417] Compat vDSO mapped to ffffe000. [ 15.942435] Checking 'hlt' instruction... OK. [ 15.958170] SMP alternatives: switching to UP code [ 15.958386] Freeing SMP alternatives: 11k freed [ 15.958833] Early unpacking initramfs... done [ 16.496309] ACPI: Core revision 20070126 [ 16.496510] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 16.499674] ACPI: setting ELCR to 0200 (from 0800) [ 16.504728] CPU0: Intel Mobile Intel(R) Celeron(TM) CPU 1200MHz stepping 04 [ 16.504741] SMP motherboard not detected. [ 16.504745] Local APIC not detected. Using dummy APIC emulation. [ 16.504825] Brought up 1 CPUs [ 16.505088] Booting paravirtualized kernel on bare hardware [ 16.505200] Time: 12:38:44 Date: 09/03/107 [ 16.505256] NET: Registered protocol family 16 [ 16.505495] EISA bus registered [ 16.505518] ACPI: bus type pci registered [ 16.506907] PCI: PCI BIOS revision 2.10 entry at 0xf0200, last bus=1 [ 16.506912] PCI: Using configuration type 1 [ 16.506915] Setting up standard PCI resources [ 16.510055] ACPI: EC: Look up EC in DSDT [ 16.519541] ACPI: EC: GPE=0x1d, ports=0x66, 0x62 [ 16.522263] ACPI: Interpreter enabled [ 16.522268] ACPI: (supports S0 S1 S3 S4 S5) [ 16.522301] ACPI: Using PIC for interrupt routing [ 16.555236] ACPI: EC: GPE=0x1d, ports=0x66, 0x62 [ 16.555333] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 16.555346] PCI: Probing PCI hardware (bus 00) [ 16.555732] PCI quirk: region f100-f17f claimed by ICH4 ACPI/GPIO/TCO [ 16.555739] PCI quirk: region f200-f23f claimed by ICH4 GPIO [ 16.555982] PCI: Firmware left 0000:01:08.0 e100 interrupts enabled, disabling [ 16.556060] PCI: Transparent bridge - 0000:00:1e.0 [ 16.556153] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 16.556241] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] [ 16.561597] ACPI: PCI Interrupt Link [PILA] (IRQs 3 4 5 6 7 9 *11 12 14 15) [ 16.561839] ACPI: PCI Interrupt Link [PILB] (IRQs 3 4 5 6 7 9 *11 12 14 15) [ 16.562150] ACPI: PCI Interrupt Link [PILC] (IRQs 3 4 5 6 7 9 *11 12 14 15) [ 16.562385] ACPI: PCI Interrupt Link [PILD] (IRQs 3 4 5 6 7 9 *11 12 14 15) [ 16.562619] ACPI: PCI Interrupt Link [PILE] (IRQs 3 4 5 6 7 9 *11 12 14 15) [ 16.562853] ACPI: PCI Interrupt Link [PILF] (IRQs 3 4 5 6 7 9 *11 12 14 15) [ 16.563062] ACPI: PCI Interrupt Link [PILG] (IRQs 3 4 5 6 7 9 11 12 14 15) *0, disabled. [ 16.563271] ACPI: PCI Interrupt Link [PILH] (IRQs 3 4 5 6 7 9 11 12 14 15) *0, disabled. [ 16.563489] Linux Plug and Play Support v0.97 (c) Adam Belay [ 16.563523] pnp: PnP ACPI init [ 16.563544] ACPI: bus type pnp registered [ 16.589366] pnp: PnP ACPI: found 11 devices [ 16.589373] ACPI: ACPI bus type pnp unregistered [ 16.589380] PnPBIOS: Disabled by ACPI PNP [ 16.589492] PCI: Using ACPI for IRQ routing [ 16.589498] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 16.618766] NET: Registered protocol family 8 [ 16.618770] NET: Registered protocol family 20 [ 16.618937] pnp: 00:0a: ioport range 0xf100-0xf16f has been reserved [ 16.618944] pnp: 00:0a: ioport range 0xf178-0xf17f has been reserved [ 16.618949] pnp: 00:0a: ioport range 0xf200-0xf23f has been reserved [ 16.618954] pnp: 00:0a: ioport range 0x380-0x38f has been reserved [ 16.618959] pnp: 00:0a: ioport range 0x4d0-0x4d1 has been reserved [ 16.618964] pnp: 00:0a: ioport range 0x580-0x587 has been reserved [ 16.618969] pnp: 00:0a: iomem range 0x0-0x9ff could not be reserved [ 16.618974] pnp: 00:0a: iomem range 0xf00-0xfff could not be reserved [ 16.618980] pnp: 00:0a: iomem range 0xfff80000-0xffffffff could not be reserved [ 16.618985] pnp: 00:0a: iomem range 0xffb00000-0xffbfffff has been reserved [ 16.622028] Time: tsc clocksource has been installed. [ 16.649562] PCI: Bus 2, cardbus bridge: 0000:01:09.0 [ 16.649567] IO window: 00007400-000074ff [ 16.649573] IO window: 00007800-000078ff [ 16.649578] PREFETCH window: 30000000-33ffffff [ 16.649584] MEM window: 38000000-3bffffff [ 16.649589] PCI: Bridge: 0000:00:1e.0 [ 16.649594] IO window: 7000-7fff [ 16.649600] MEM window: 80100000-801fffff [ 16.649606] PREFETCH window: 30000000-33ffffff [ 16.649625] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 16.650030] ACPI: PCI Interrupt Link [PILB] enabled at IRQ 11 [ 16.650036] PCI: setting IRQ 11 as level-triggered [ 16.650041] ACPI: PCI Interrupt 0000:01:09.0[A] -> Link [PILB] -> GSI 11 (level, low) -> IRQ 11 [ 16.650075] NET: Registered protocol family 2 [ 16.690096] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 16.690185] TCP established hash table entries: 16384 (order: 5, 196608 bytes) [ 16.690658] TCP bind hash table entries: 16384 (order: 5, 131072 bytes) [ 16.691254] TCP: Hash tables configured (established 16384 bind 16384) [ 16.691261] TCP reno registered [ 16.702344] checking if image is initramfs...<6>Switched to high resolution mode on CPU 0 [ 17.151368] it is [ 17.708057] Freeing initrd memory: 7068k freed [ 17.708360] Simple Boot Flag at 0x41 set to 0x1 [ 17.708860] audit: initializing netlink socket (disabled) [ 17.708891] audit(1191415125.756:1): initialized [ 17.713230] VFS: Disk quotas dquot_6.5.1 [ 17.713397] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 17.713644] io scheduler noop registered [ 17.713651] io scheduler anticipatory registered [ 17.713655] io scheduler deadline registered [ 17.713702] io scheduler cfq registered (default) [ 17.713727] Boot video device is 0000:00:02.0 [ 17.714238] isapnp: Scanning for PnP cards... [ 18.068362] isapnp: No Plug & Play device found [ 18.136255] Real Time Clock Driver v1.12ac [ 18.136427] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 18.136883] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A [ 18.138727] pnp: Device 00:07 activated. [ 18.139018] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 18.139560] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [PILB] -> GSI 11 (level, low) -> IRQ 11 [ 18.139577] ACPI: PCI interrupt for device 0000:00:1f.6 disabled [ 18.140574] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 18.140988] input: Macintosh mouse button emulation as /class/input/input0 [ 18.141139] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 18.143755] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 18.143768] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 18.144111] mice: PS/2 mouse device common for all mice [ 18.144334] EISA: Probing bus 0 at eisa.0 [ 18.144374] Cannot allocate resource for EISA slot 7 [ 18.144378] Cannot allocate resource for EISA slot 8 [ 18.144381] EISA: Detected 0 cards. [ 18.144569] TCP cubic registered [ 18.144608] NET: Registered protocol family 1 [ 18.144666] Using IPI No-Shortcut mode [ 18.144983] Magic number: 11:102:632 [ 18.145092] hash matches device ptycb [ 18.145912] Freeing unused kernel memory: 364k freed [ 18.177923] input: AT Translated Set 2 keyboard as /class/input/input1 [ 19.560982] AppArmor: AppArmor initialized<5>audit(1191415127.256:2): type=1505 info="AppArmor initialized" pid=1183 [ 19.578336] fuse init (API version 7.8) [ 19.588203] Failure registering capabilities with primary security module. [ 19.617681] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 19.634927] ACPI: Thermal Zone [THR1] (76 C) [ 19.648176] ACPI: Thermal Zone [THR2] (45 C) [ 20.760537] usbcore: registered new interface driver usbfs [ 20.760585] usbcore: registered new interface driver hub [ 20.760641] usbcore: registered new device driver usb [ 20.763172] USB Universal Host Controller Interface driver v3.0 [ 20.763707] ACPI: PCI Interrupt Link [PILA] enabled at IRQ 11 [ 20.763715] ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [PILA] -> GSI 11 (level, low) -> IRQ 11 [ 20.763735] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 20.763741] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 20.764006] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 20.764043] uhci_hcd 0000:00:1d.0: irq 11, io base 0x0000a4a0 [ 20.764286] usb usb1: configuration #1 chosen from 1 choice [ 20.764336] hub 1-0:1.0: USB hub found [ 20.764349] hub 1-0:1.0: 2 ports detected [ 20.866106] ACPI: PCI Interrupt Link [PILD] enabled at IRQ 11 [ 20.866116] ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [PILD] -> GSI 11 (level, low) -> IRQ 11 [ 20.866136] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 20.866142] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 20.866192] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 20.866225] uhci_hcd 0000:00:1d.1: irq 11, io base 0x0000a4e0 [ 20.866415] usb usb2: configuration #1 chosen from 1 choice [ 20.866474] hub 2-0:1.0: USB hub found [ 20.866487] hub 2-0:1.0: 2 ports detected [ 20.903030] SCSI subsystem initialized [ 20.919286] libata version 2.21 loaded. [ 20.970238] ACPI: PCI Interrupt Link [PILC] enabled at IRQ 11 [ 20.970248] ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [PILC] -> GSI 11 (level, low) -> IRQ 11 [ 20.970272] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 20.970278] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 20.970363] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 20.970400] uhci_hcd 0000:00:1d.2: irq 11, io base 0x0000a800 [ 20.970612] usb usb3: configuration #1 chosen from 1 choice [ 20.970666] hub 3-0:1.0: USB hub found [ 20.970682] hub 3-0:1.0: 2 ports detected [ 21.002034] e100: Intel(R) PRO/100 Network Driver, 3.5.17-k4-NAPI [ 21.002042] e100: Copyright(c) 1999-2006 Intel Corporation [ 21.080332] ata_piix 0000:00:1f.1: version 2.11 [ 21.080361] ACPI: Unable to derive IRQ for device 0000:00:1f.1 [ 21.080365] ACPI: PCI Interrupt 0000:00:1f.1[A]: no GSI [ 21.080426] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 21.080649] scsi0 : ata_piix [ 21.080730] scsi1 : ata_piix [ 21.080908] ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001a890 irq 14 [ 21.080915] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001a898 irq 15 [ 21.241909] ata1.00: ATA-5: IC25N020ATCS04-0, CA2OA71A, max UDMA/100 [ 21.241918] ata1.00: 39070080 sectors, multi 16: LBA [ 21.257927] ata1.00: configured for UDMA/100 [ 5.600000] Marking TSC unstable due to: possible TSC halt in C2. [ 5.604000] Time: acpi_pm clocksource has been installed. [ 5.780000] Clocksource tsc unstable (delta = -173582835 ns) [ 5.868000] ata2.00: ATAPI: UJDA720 DVD/CDRW, 1.03, max UDMA/33 [ 6.040000] ata2.00: configured for UDMA/33 [ 6.040000] scsi 0:0:0:0: Direct-Access ATA IC25N020ATCS04-0 CA2O PQ: 0 ANSI: 5 [ 6.044000] scsi 1:0:0:0: CD-ROM MATSHITA UJDA720 DVD/CDRW 1.03 PQ: 0 ANSI: 5 [ 6.044000] ACPI: PCI Interrupt Link [PILE] enabled at IRQ 11 [ 6.044000] ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [PILE] -> GSI 11 (level, low) -> IRQ 11 [ 6.068000] e100: eth0: e100_probe: addr 0x80100000, irq 11, MAC addr 00:00:E2:8C:97:7E [ 6.104000] sd 0:0:0:0: [sda] 39070080 512-byte hardware sectors (20004 MB) [ 6.104000] sd 0:0:0:0: [sda] Write Protect is off [ 6.104000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 6.104000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.104000] sd 0:0:0:0: [sda] 39070080 512-byte hardware sectors (20004 MB) [ 6.104000] sd 0:0:0:0: [sda] Write Protect is off [ 6.104000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 6.104000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.104000] sda: sda1 sda2 sda3 < sda5 > [ 6.168000] sd 0:0:0:0: [sda] Attached SCSI disk [ 6.180000] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 6.180000] scsi 1:0:0:0: Attached scsi generic sg1 type 5 [ 6.208000] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 6.208000] Uniform CD-ROM driver Revision: 3.20 [ 6.208000] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 6.576000] Attempting manual resume [ 6.576000] swsusp: Resume From Partition 8:5 [ 6.576000] PM: Checking swsusp image. [ 6.576000] PM: Resume from disk failed. [ 6.648000] kjournald starting. Commit interval 5 seconds [ 6.648000] EXT3-fs: mounted filesystem with ordered data mode. [ 26.528000] Linux agpgart interface v0.102 (c) Dave Jones [ 26.532000] agpgart: Detected an Intel 830M Chipset. [ 26.536000] agpgart: Detected 8060K stolen memory. [ 26.544000] agpgart: AGP aperture is 128M @ 0x98000000 [ 26.728000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 26.776000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 26.868000] iTCO_vendor_support: vendor-support=0 [ 27.292000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007) [ 27.328000] iTCO_wdt: I/O address 0xf160 already in use [ 27.328000] iTCO_wdt: No card detected [ 27.952000] intel_rng: FWH not detected [ 28.456000] Yenta: CardBus bridge found at 0000:01:09.0 [1014:1017] [ 28.456000] Yenta: Enabling burst memory read transactions [ 28.456000] Yenta: Using CSCINT to route CSC interrupts to PCI [ 28.456000] Yenta: Routing CardBus interrupts to PCI [ 28.456000] Yenta TI: socket 0000:01:09.0, mfunc 0x01111c02, devctl 0x64 [ 28.656000] IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 28.672000] input: TPPS/2 IBM TrackPoint as /class/input/input2 [ 28.676000] parport_pc 00:06: reported by Plug and Play ACPI [ 28.676000] parport0: PC-style at 0x3bc, irq 7 [PCSPP] [ 28.676000] input: PC Speaker as /class/input/input3 [ 28.688000] Yenta: ISA IRQ mask 0x0478, PCI irq 11 [ 28.688000] Socket status: 30000020 [ 28.688000] Yenta: Raising subordinate bus# of parent bus (#01) from #01 to #05 [ 28.688000] pcmcia: parent PCI bridge I/O window: 0x7000 - 0x7fff [ 28.688000] cs: IO port probe 0x7000-0x7fff: clean. [ 28.688000] pcmcia: parent PCI bridge Memory window: 0x80100000 - 0x801fffff [ 28.688000] pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x33ffffff [ 28.732000] irda_init() [ 28.732000] NET: Registered protocol family 23 [ 28.828000] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 3. [ 28.828000] nsc-ircc, chip->init [ 28.828000] nsc-ircc, Found chip at base=0x02e [ 28.828000] nsc-ircc, driver loaded (Dag Brattli) [ 28.828000] nsc_ircc_open(), can't get iobase of 0x2f8 [ 28.828000] nsc-ircc, Found chip at base=0x02e [ 28.828000] nsc-ircc, driver loaded (Dag Brattli) [ 28.828000] nsc_ircc_open(), can't get iobase of 0x2f8 [ 28.828000] pnp: Device 00:08 disabled. [ 29.324000] pccard: CardBus card inserted into slot 0 [ 29.472000] cs: IO port probe 0x100-0x3af: clean. [ 29.472000] cs: IO port probe 0x3e0-0x4ff: clean. [ 29.476000] cs: IO port probe 0x820-0x8ff: clean. [ 29.476000] cs: IO port probe 0xc00-0xcf7: clean. [ 29.476000] cs: IO port probe 0xa00-0xaff: clean. [ 29.508000] ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [PILB] -> GSI 11 (level, low) -> IRQ 11 [ 29.508000] PCI: Setting latency timer of device 0000:00:1f.5 to 64 [ 29.928000] intel8x0_measure_ac97_clock: measured 55008 usecs [ 29.928000] intel8x0: clocking to 48000 [ 30.956000] lp0: using parport0 (interrupt-driven). [ 31.204000] ndiswrapper version 1.49rc2 loaded (smp=yes, preempt=no) [ 31.348000] ndiswrapper: driver netwg511 (NETGEAR,09/06/2004, 2.1.25) loaded [ 31.348000] PCI: Enabling device 0000:02:00.0 (0000 -> 0002) [ 31.348000] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [PILB] -> GSI 11 (level, low) -> IRQ 11 [ 31.348000] PCI: Setting latency timer of device 0000:02:00.0 to 64 [ 31.352000] ndiswrapper: using IRQ 11 [ 32.724000] wlan0: ethernet device 00:0f:b5:23:a3:61 using NDIS driver: netwg511, version: 0x20119, NDIS version: 0x501, vendor: 'NETGEAR WG511 54 Mbps Wireless PC Card', 1260:3890.5.conf [ 32.724000] wlan0: encryption modes supported: WEP; TKIP with WPA; AES/CCMP with WPA [ 32.724000] usbcore: registered new interface driver ndiswrapper [ 32.832000] Adding 409616k swap on /dev/sda5. Priority:-1 extents:1 across:409616k [ 33.272000] EXT3 FS on sda2, internal journal [ 36.020000] input: Power Button (FF) as /class/input/input4 [ 36.028000] ACPI: Power Button (FF) [PWRF] [ 36.080000] input: Sleep Button (CM) as /class/input/input5 [ 36.080000] ACPI: Sleep Button (CM) [SLPB] [ 36.104000] input: Lid Switch as /class/input/input6 [ 36.104000] ACPI: Lid Switch [LID] [ 36.260000] No dock devices found. [ 36.368000] ACPI: AC Adapter [AC] (on-line) [ 36.420000] ACPI: Battery Slot [BAT0] (battery present) [ 39.412000] ppdev: user-space parallel port driver [ 39.792000] serial8250: too much work for irq3 [ 40.692000] audit(1191415164.818:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=4552 profile="/usr/sbin/cupsd" [ 40.852000] IBM machine detected. Enabling interrupts during APM calls. [ 40.852000] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) [ 40.852000] apm: overridden by ACPI. [ 41.088000] thinkpad_acpi: ThinkPad ACPI Extras v0.14 [ 41.088000] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 41.092000] BUG: unable to handle kernel NULL pointer dereference at virtual address 00000008 [ 41.092000] printing eip: [ 41.092000] c022a7b5 [ 41.092000] *pde = 00000000 [ 41.092000] Oops: 0000 [#1] [ 41.092000] SMP [ 41.092000] Modules linked in: thinkpad_acpi ppdev cpufreq_powersave cpufreq_conservative cpufreq_stats cpufreq_userspace cpufreq_ondemand freq_table battery ac sbs dock video button container ndiswrapper lp snd_intel8x0 snd_ac97_codec ac97_bus snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_dummy snd_seq_oss pcmcia snd_seq_midi snd_rawmidi irtty_sir sir_dev snd_seq_midi_event irda snd_seq pcspkr snd_timer snd_seq_device crc_ccitt parport_pc parport yenta_socket psmouse serio_raw snd soundcore snd_page_alloc rsrc_nonstatic pcmcia_core iTCO_wdt iTCO_vendor_support shpchp pci_hotplug intel_agp agpgart evdev ext3 jbd mbcache sg sr_mod cdrom sd_mod ata_piix e100 mii ata_generic libata scsi_mod uhci_hcd usbcore thermal processor fan fuse apparmor commoncap [ 41.092000] CPU: 0 [ 41.092000] EIP: 0060:[] Tainted: P VLI [ 41.092000] EFLAGS: 00010202 (2.6.22-12-generic #1) [ 41.092000] EIP is at acpi_ns_internalize_name+0xd/0x83 [ 41.092000] eax: 00000008 ebx: 00000000 ecx: 00000000 edx: d6e69e54 [ 41.092000] esi: e042a0c0 edi: d6e69e54 ebp: d6e69e70 esp: d6e69de8 [ 41.092000] ds: 007b es: 007b fs: 00d8 gs: 0033 ss: 0068 [ 41.092000] Process modprobe (pid: 4588, ti=d6e68000 task=d82aa530 task.ti=d6e68000) [ 41.092000] Stack: d6e69e38 00000000 e0429e60 00008080 c01c4390 e0429e60 00000000 00000000 [ 41.092000] e042a0c0 00000000 d6e69e70 c022a85c e0429e60 d6e43240 d7a72c30 c01c44ef [ 41.092000] 00000004 e0429e60 d6e3ea18 c01c3884 00008080 00000004 00000004 00000080 [ 41.092000] Call Trace: [ 41.092000] [] __sysfs_new_dirent+0x20/0x50 [ 41.092000] [] acpi_ns_get_node+0x31/0x93 [ 41.092000] [] sysfs_make_dirent+0x2f/0x50 [ 41.092000] [] sysfs_add_file+0x74/0x90 [ 41.092000] [] drv_acpi_handle_init+0x37/0x90 [thinkpad_acpi] [ 41.092000] [] hotkey_notify+0x0/0x80 [thinkpad_acpi] [ 41.092000] [] acpi_method_notify_enable+0x15/0x34 [ 41.092000] [] cmos_init+0x52/0x70 [thinkpad_acpi] [ 41.092000] [] thinkpad_acpi_module_init+0x27f/0x69a [thinkpad_acpi] [ 41.092000] [] sys_init_module+0x151/0x1a00 [ 41.092000] [] prio_tree_insert+0x1f/0x250 [ 41.092000] [] sysenter_past_esp+0x6b/0xa9 [ 41.092000] ======================= [ 41.092000] Code: c7 44 24 14 01 00 00 00 8b 54 24 14 8d 04 96 e9 f2 fe ff ff 83 c4 18 89 d0 5b 5e 5f 5d c3 55 57 89 d7 56 53 83 ec 1c 85 c0 74 67 <80> 38 00 74 62 85 d2 74 5e 89 04 24 89 e0 e8 b5 fb ff ff 8b 4c [ 41.092000] EIP: [] acpi_ns_internalize_name+0xd/0x83 SS:ESP 0068:d6e69de8 [ 41.216000] Non-volatile memory driver v1.2 [ 41.244000] input: /usr/sbin/thinkpad-keys as /class/input/input7 [ 41.568000] Failure registering capabilities with primary security module. [ 41.924000] Bluetooth: Core ver 2.11 [ 41.924000] NET: Registered protocol family 31 [ 41.924000] Bluetooth: HCI device and connection manager initialized [ 41.924000] Bluetooth: HCI socket layer initialized [ 41.944000] Bluetooth: L2CAP ver 2.8 [ 41.944000] Bluetooth: L2CAP socket layer initialized [ 42.012000] Bluetooth: RFCOMM socket layer initialized [ 42.012000] Bluetooth: RFCOMM TTY layer initialized [ 42.012000] Bluetooth: RFCOMM ver 1.8 [ 45.296000] [drm] Initialized drm 1.1.0 20060810 [ 45.304000] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [PILA] -> GSI 11 (level, low) -> IRQ 11 [ 45.304000] [drm] Initialized i915 1.6.0 20060119 on minor 0 [ 45.308000] [drm] Initialized i915 1.6.0 20060119 on minor 1 [ 124.028000] NET: Registered protocol family 10 [ 124.028000] lo: Disabled Privacy Extensions [ 124.028000] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 124.028000] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 147.680000] NET: Registered protocol family 17 [ 152.104000] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 167.476000] wlan0: no IPv6 routers present [ 1313.668000] usb 2-2: new full speed USB device using uhci_hcd and address 2 [ 1313.816000] usb 2-2: configuration #1 chosen from 1 choice [ 1313.816000] hub 2-2:1.0: USB hub found [ 1313.820000] hub 2-2:1.0: 4 ports detected [ 1318.280000] usb 2-2.1: new full speed USB device using uhci_hcd and address 3 [ 1318.520000] usb 2-2.1: configuration #1 chosen from 1 choice [ 1318.692000] usbcore: registered new interface driver libusual [ 1318.844000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 1318.848000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 1318.856000] Initializing USB Mass Storage driver... [ 1318.860000] scsi2 : SCSI emulation for USB Mass Storage devices [ 1318.860000] usb-storage: device found at 3 [ 1318.860000] usb-storage: waiting for device to settle before scanning [ 1318.860000] usbcore: registered new interface driver usb-storage [ 1318.860000] USB Mass Storage support registered. [ 1323.860000] usb-storage: device scan complete [ 1323.896000] scsi 2:0:0:0: Direct-Access Maxtor 3 3073U4 BAC5 PQ: 0 ANSI: 0 [ 1323.916000] sd 2:0:0:0: [sdb] 60030432 512-byte hardware sectors (30736 MB) [ 1323.920000] sd 2:0:0:0: [sdb] Write Protect is off [ 1323.920000] sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00 [ 1323.920000] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 1323.924000] sd 2:0:0:0: [sdb] 60030432 512-byte hardware sectors (30736 MB) [ 1323.932000] sd 2:0:0:0: [sdb] Write Protect is off [ 1323.932000] sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00 [ 1323.932000] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 1323.932000] sdb: sdb1 [ 1323.972000] sd 2:0:0:0: [sdb] Attached SCSI disk [ 1323.972000] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 1336.356000] loop: module loaded [ 1597.780000] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex [ 1597.780000] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 1614.144000] eth0: no IPv6 routers present [ 1620.040000] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 4455.956000] usb 2-2: USB disconnect, address 2 [ 4455.956000] usb 2-2.1: USB disconnect, address 3 [ 4458.620000] pccard: card ejected from slot 0 [ 4459.056000] ndiswrapper: device wlan0 removed [ 4459.056000] ACPI: PCI interrupt for device 0000:02:00.0 disabled [ 4460.204000] usbcore: deregistering interface driver ndiswrapper [ 4460.604000] ACPI: PCI interrupt for device 0000:01:08.0 disabled [ 4463.476000] PM: suspend-to-disk mode set to 'shutdown' [ 4463.476000] swsusp: Basic memory bitmaps created [ 4463.476000] Stopping tasks ... done. [ 4464.080000] Shrinking memory... -\|/-done (40294 pages freed) [ 4464.952000] Freed 161176 kbytes in 0.87 seconds (185.25 MB/s) [ 4464.952000] Suspending console(s) [ 4465.156000] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 4465.252000] usb_device usbdev3.1: PM: suspend 0->1, parent usb3 already 2 [ 4465.252000] usb_endpoint usbdev3.1_ep81: PM: suspend 0->1, parent 3-0:1.0 already 2 [ 4465.252000] hub 3-0:1.0: PM: suspend 2->1, parent usb3 already 2 [ 4465.252000] usb_endpoint usbdev3.1_ep00: PM: suspend 0->1, parent usb3 already 2 [ 4465.252000] usb_device usbdev2.1: PM: suspend 0->1, parent usb2 already 2 [ 4465.252000] usb_endpoint usbdev2.1_ep81: PM: suspend 0->1, parent 2-0:1.0 already 2 [ 4465.252000] hub 2-0:1.0: PM: suspend 2->1, parent usb2 already 2 [ 4465.252000] usb_endpoint usbdev2.1_ep00: PM: suspend 0->1, parent usb2 already 2 [ 4465.252000] usb_device usbdev1.1: PM: suspend 0->1, parent usb1 already 2 [ 4465.252000] usb_endpoint usbdev1.1_ep81: PM: suspend 0->1, parent 1-0:1.0 already 2 [ 4465.252000] hub 1-0:1.0: PM: suspend 2->1, parent usb1 already 2 [ 4465.252000] usb_endpoint usbdev1.1_ep00: PM: suspend 0->1, parent usb1 already 2 [ 4465.252000] pnp: Device 00:07 disabled. [ 4465.252000] pnp: Device 00:06 disabled. [ 4465.252000] ACPI: PCI interrupt for device 0000:00:1f.5 disabled [ 4465.252000] ACPI: Unable to derive IRQ for device 0000:00:1f.1 [ 4465.252000] ACPI: PCI interrupt for device 0000:00:1d.2 disabled [ 4465.252000] ACPI: PCI interrupt for device 0000:00:1d.1 disabled [ 4465.252000] ACPI: PCI interrupt for device 0000:00:1d.0 disabled [ 4465.256000] Disabling non-boot CPUs ... [ 4465.256000] PM: snapshotting memory. [ 4465.256000] swsusp: critical section: [ 4465.256000] swsusp: Need to copy 59623 pages [ 4465.256000] swsusp: Normal pages needed: 59623 + 1024 + 14, available pages: 69349 [ 4465.256000] PM: Image restored successfully. [ 4465.256000] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [PILA] -> GSI 11 (level, low) -> IRQ 11 [ 4465.256000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [PILA] -> GSI 11 (level, low) -> IRQ 11 [ 4465.256000] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 4465.256000] usb usb1: root hub lost power or was reset [ 4465.256000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [PILD] -> GSI 11 (level, low) -> IRQ 11 [ 4465.256000] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 4465.256000] usb usb2: root hub lost power or was reset [ 4465.256000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [PILC] -> GSI 11 (level, low) -> IRQ 11 [ 4465.256000] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 4465.256000] usb usb3: root hub lost power or was reset [ 4465.256000] PM: Writing back config space on device 0000:00:1e.0 at offset 7 (was 2807070, writing 22807070) [ 4465.256000] PM: Writing back config space on device 0000:00:1e.0 at offset 6 (was 10100, writing 50100) [ 4465.256000] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 4465.256000] ACPI: Unable to derive IRQ for device 0000:00:1f.1 [ 4465.256000] ACPI: PCI Interrupt 0000:00:1f.1[A]: no GSI [ 4465.256000] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 4465.256000] PM: Writing back config space on device 0000:00:1f.5 at offset 1 (was 2800005, writing 2800001) [ 4465.256000] ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [PILB] -> GSI 11 (level, low) -> IRQ 11 [ 4465.256000] PCI: Setting latency timer of device 0000:00:1f.5 to 64 [ 4465.444000] ata1.00: configured for UDMA/100 [ 4465.444000] sd 0:0:0:0: [sda] 39070080 512-byte hardware sectors (20004 MB) [ 4465.444000] sd 0:0:0:0: [sda] Write Protect is off [ 4465.444000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4465.444000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4466.068000] ata2.00: configured for UDMA/33 [ 4466.268000] PM: Writing back config space on device 0000:01:09.0 at offset f (was 3c0010b, writing 540010b) [ 4466.268000] PM: Writing back config space on device 0000:01:09.0 at offset 3 (was 24008, writing 2a820) [ 4466.268000] pnp: Failed to activate device 00:05. [ 4466.272000] pnp: Device 00:06 activated. [ 4466.272000] pnp: Device 00:07 activated. [ 4466.272000] pnp: Failed to activate device 00:09. [ 4466.600000] sd 0:0:0:0: [sda] Starting disk [ 4466.624000] Restarting tasks ... done. [ 4466.640000] swsusp: Basic memory bitmaps freed [ 4471.744000] ndiswrapper version 1.49rc2 loaded (smp=yes, preempt=no) [ 4471.864000] usbcore: registered new interface driver ndiswrapper [ 4471.928000] e100: Intel(R) PRO/100 Network Driver, 3.5.17-k4-NAPI [ 4471.928000] e100: Copyright(c) 1999-2006 Intel Corporation [ 4471.932000] PCI: Enabling device 0000:01:08.0 (0000 -> 0003) [ 4471.932000] ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [PILE] -> GSI 11 (level, low) -> IRQ 11 [ 4471.932000] PCI: Setting latency timer of device 0000:01:08.0 to 64 [ 4471.956000] e100: eth0: e100_probe: addr 0x80100000, irq 11, MAC addr 00:00:E2:8C:97:7E [ 4472.600000] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 4472.604000] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex [ 4472.612000] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 4472.676000] pccard: CardBus card inserted into slot 0 [ 4473.496000] ndiswrapper: driver netwg511 (NETGEAR,09/06/2004, 2.1.25) loaded [ 4473.500000] PCI: Enabling device 0000:02:00.0 (0000 -> 0002) [ 4473.500000] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [PILB] -> GSI 11 (level, low) -> IRQ 11 [ 4473.500000] PCI: Setting latency timer of device 0000:02:00.0 to 64 [ 4473.500000] ndiswrapper: using IRQ 11 [ 4474.876000] wlan0: ethernet device 00:0f:b5:23:a3:61 using NDIS driver: netwg511, version: 0x20119, NDIS version: 0x501, vendor: 'NETGEAR WG511 54 Mbps Wireless PC Card', 1260:3890.5.conf [ 4474.876000] wlan0: encryption modes supported: WEP; TKIP with WPA; AES/CCMP with WPA [ 4478.496000] input: Power Button (FF) as /class/input/input8 [ 4478.496000] ACPI: Power Button (FF) [PWRF] [ 4478.496000] input: Sleep Button (CM) as /class/input/input9 [ 4478.496000] ACPI: Sleep Button (CM) [SLPB] [ 4478.496000] input: Lid Switch as /class/input/input10 [ 4478.496000] ACPI: Lid Switch [LID] [ 4479.648000] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 4479.668000] ACPI: Thermal Zone [THR1] (37 C) [ 4479.716000] ACPI: Thermal Zone [THR2] (28 C) [ 4492.000000] eth0: no IPv6 routers present [ 4992.284000] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 4992.536000] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex [ 5016.532000] eth0: no IPv6 routers present