[ 0.000000] microcode: CPU0 microcode updated early to revision 0x1e, date = 2015-08-13 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.4.0-36-generic (buildd@lcy01-01) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.2) ) #55-Ubuntu SMP Thu Aug 11 18:01:55 UTC 2016 (Ubuntu 4.4.0-36.55-generic 4.4.16) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.4.0-36-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers' [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] x86/fpu: Using 'eager' FPU context switches. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cc9abfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cc9ac000-0x00000000cc9b2fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000cc9b3000-0x00000000ccdddfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000ccdde000-0x00000000cd0b3fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000cd0b4000-0x00000000dad4cfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dad4d000-0x00000000daf55fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000daf56000-0x00000000daf7efff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000daf7f000-0x00000000db5f6fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000db5f7000-0x00000000dbffefff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000dbfff000-0x00000000dbffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dd000000-0x00000000df1fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011fdfffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: TOSHIBA Satellite C50-A512/PT10S, BIOS 1.30 04/23/2014 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x11fe00 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-E7FFF uncachable [ 0.000000] E8000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask 7F00000000 write-back [ 0.000000] 1 base 0100000000 mask 7FE0000000 write-back [ 0.000000] 2 base 00E0000000 mask 7FE0000000 uncachable [ 0.000000] 3 base 00DE000000 mask 7FFE000000 uncachable [ 0.000000] 4 base 00DD000000 mask 7FFF000000 uncachable [ 0.000000] 5 base 011FE00000 mask 7FFFE00000 uncachable [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] original variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 4GB, type WB [ 0.000000] reg 1, base: 4GB, range: 512MB, type WB [ 0.000000] reg 2, base: 3584MB, range: 512MB, type UC [ 0.000000] reg 3, base: 3552MB, range: 32MB, type UC [ 0.000000] reg 4, base: 3536MB, range: 16MB, type UC [ 0.000000] reg 5, base: 4606MB, range: 2MB, type UC [ 0.000000] total RAM covered: 4046M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 64M num_reg: 7 lose cover RAM: 0G [ 0.000000] New variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB [ 0.000000] reg 2, base: 3GB, range: 512MB, type WB [ 0.000000] reg 3, base: 3536MB, range: 16MB, type UC [ 0.000000] reg 4, base: 3552MB, range: 32MB, type UC [ 0.000000] reg 5, base: 4GB, range: 512MB, type WB [ 0.000000] reg 6, base: 4606MB, range: 2MB, type UC [ 0.000000] e820: update [mem 0xdd000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xdc000 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fd4b0-0x000fd4bf] mapped at [ffff8800000fd4b0] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x02200000, 0x02200fff] PGTABLE [ 0.000000] BRK [0x02201000, 0x02201fff] PGTABLE [ 0.000000] BRK [0x02202000, 0x02202fff] PGTABLE [ 0.000000] BRK [0x02203000, 0x02203fff] PGTABLE [ 0.000000] BRK [0x02204000, 0x02204fff] PGTABLE [ 0.000000] BRK [0x02205000, 0x02205fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x336ba000-0x35b54fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 TOSASU) [ 0.000000] ACPI: XSDT 0x00000000DAF5E088 000094 (v01 TOSASU TOSASU00 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 0x00000000DAF7B7B0 00010C (v05 TOSASU TOSASU00 01072009 AMI 00010013) [ 0.000000] ACPI: DSDT 0x00000000DAF5E1B0 01D5FD (v02 TOSASU TOSASU00 00000130 INTL 20091112) [ 0.000000] ACPI: FACS 0x00000000DB5F4080 000040 [ 0.000000] ACPI: APIC 0x00000000DAF7B8C0 000072 (v03 TOSASU TOSASU00 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 0x00000000DAF7B938 000044 (v01 TOSASU TOSASU00 01072009 AMI 00010013) [ 0.000000] ACPI: ECDT 0x00000000DAF7B980 0000C1 (v01 TOSASU TOSASU00 01072009 AMI. 00000005) [ 0.000000] ACPI: SLIC 0x00000000DAF7BA48 000176 (v01 TOSASU TOSASU00 01072009 MSFT 00000001) [ 0.000000] ACPI: MSDM 0x00000000DAF7BBC0 000055 (v03 TOSASU TOSASU00 06222004 MSFT 00010013) [ 0.000000] ACPI: LPIT 0x00000000DAF7BC18 00005C (v01 TOSASU TOSASU00 00000000 AMI. 00000005) [ 0.000000] ACPI: SSDT 0x00000000DAF7BC78 000228 (v01 INTEL sensrhub 00000000 INTL 20120711) [ 0.000000] ACPI: SSDT 0x00000000DAF7BEA0 000557 (v01 PmRef Cpu0Ist 00003000 INTL 20120711) [ 0.000000] ACPI: SSDT 0x00000000DAF7C3F8 000AD8 (v01 PmRef CpuPm 00003000 INTL 20120711) [ 0.000000] ACPI: MCFG 0x00000000DAF7CED0 00003C (v01 TOSASU TOSASU00 01072009 MSFT 00000097) [ 0.000000] ACPI: HPET 0x00000000DAF7CF10 000038 (v01 TOSASU TOSASU00 01072009 AMI. 00000005) [ 0.000000] ACPI: SSDT 0x00000000DAF7CF48 000315 (v01 SataRe SataTabl 00001000 INTL 20120711) [ 0.000000] ACPI: SSDT 0x00000000DAF7D260 0019B2 (v01 SaSsdt SaSsdt 00003000 INTL 20091112) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000011fdfffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x11fdf7000-0x11fdfbfff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000011fdfffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000cc9abfff] [ 0.000000] node 0: [mem 0x00000000cc9b3000-0x00000000ccdddfff] [ 0.000000] node 0: [mem 0x00000000cd0b4000-0x00000000dad4cfff] [ 0.000000] node 0: [mem 0x00000000dbfff000-0x00000000dbffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000011fdfffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000011fdfffff] [ 0.000000] On node 0 totalpages: 1026061 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 13930 pages used for memmap [ 0.000000] DMA32 zone: 891505 pages, LIFO batch:31 [ 0.000000] Normal zone: 2040 pages used for memmap [ 0.000000] Normal zone: 130560 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics stolen memory at 0xdd200000-0xdf1fffff [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xcc9ac000-0xcc9b2fff] [ 0.000000] PM: Registered nosave memory: [mem 0xccdde000-0xcd0b3fff] [ 0.000000] PM: Registered nosave memory: [mem 0xdad4d000-0xdaf55fff] [ 0.000000] PM: Registered nosave memory: [mem 0xdaf56000-0xdaf7efff] [ 0.000000] PM: Registered nosave memory: [mem 0xdaf7f000-0xdb5f6fff] [ 0.000000] PM: Registered nosave memory: [mem 0xdb5f7000-0xdbffefff] [ 0.000000] PM: Registered nosave memory: [mem 0xdc000000-0xdcffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdd000000-0xdf1fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdf200000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.000000] e820: [mem 0xdf200000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 33 pages/cpu @ffff88011fa00000 s98008 r8192 d28968 u524288 [ 0.000000] pcpu-alloc: s98008 r8192 d28968 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1010006 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.4.0-36-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 3915816K/4104244K available (8394K kernel code, 1282K rwdata, 3944K rodata, 1480K init, 1292K bss, 188428K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000] NR_IRQS:16640 nr_irqs:456 16 [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2494.340 MHz processor [ 0.000023] Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.68 BogoMIPS (lpj=9977360) [ 0.000025] pid_max: default: 32768 minimum: 301 [ 0.000029] ACPI: Core revision 20150930 [ 0.000030] TOSHIBA Satellite detected - force copy of DSDT to local memory [ 0.000085] ACPI: Forced DSDT copy: length 0x1D5FD copied locally, original unmapped [ 0.015624] ACPI: 6 ACPI AML tables successfully acquired and loaded [ 0.015640] Security Framework initialized [ 0.015641] Yama: becoming mindful. [ 0.015654] AppArmor: AppArmor initialized [ 0.015862] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.016726] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.017128] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.017133] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.017303] Initializing cgroup subsys io [ 0.017306] Initializing cgroup subsys memory [ 0.017311] Initializing cgroup subsys devices [ 0.017313] Initializing cgroup subsys freezer [ 0.017315] Initializing cgroup subsys net_cls [ 0.017316] Initializing cgroup subsys perf_event [ 0.017318] Initializing cgroup subsys net_prio [ 0.017319] Initializing cgroup subsys hugetlb [ 0.017322] Initializing cgroup subsys pids [ 0.017340] CPU: Physical Processor ID: 0 [ 0.017341] CPU: Processor Core ID: 0 [ 0.017345] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.017345] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.018129] mce: CPU supports 7 MCE banks [ 0.018139] CPU0: Thermal monitoring enabled (TM1) [ 0.018145] process: using mwait in idle threads [ 0.018148] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 [ 0.018149] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 [ 0.018417] Freeing SMP alternatives memory: 28K (ffffffff820b4000 - ffffffff820bb000) [ 0.050283] ftrace: allocating 31996 entries in 125 pages [ 0.060525] smpboot: Max logical packages: 2 [ 0.060527] smpboot: APIC(0) Converting physical 0 to logical package 0 [ 0.060805] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 [ 0.100491] TSC deadline timer enabled [ 0.100494] smpboot: CPU0: Intel(R) Core(TM) i5-4200M CPU @ 2.50GHz (family: 0x6, model: 0x3c, stepping: 0x3) [ 0.100508] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver. [ 0.100524] ... version: 3 [ 0.100524] ... bit width: 48 [ 0.100525] ... generic registers: 4 [ 0.100526] ... value mask: 0000ffffffffffff [ 0.100526] ... max period: 0000ffffffffffff [ 0.100527] ... fixed-purpose events: 3 [ 0.100528] ... event mask: 000000070000000f [ 0.101152] x86: Booting SMP configuration: [ 0.101153] .... node #0, CPUs: #1 [ 0.102385] microcode: CPU1 microcode updated early to revision 0x1e, date = 2015-08-13 [ 0.105301] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.105359] #2 #3 [ 0.111782] x86: Booted up 1 node, 4 CPUs [ 0.111785] smpboot: Total of 4 processors activated (19954.72 BogoMIPS) [ 0.114836] devtmpfs: initialized [ 0.116263] evm: security.selinux [ 0.116264] evm: security.SMACK64 [ 0.116264] evm: security.SMACK64EXEC [ 0.116265] evm: security.SMACK64TRANSMUTE [ 0.116265] evm: security.SMACK64MMAP [ 0.116266] evm: security.ima [ 0.116267] evm: security.capability [ 0.116312] PM: Registering ACPI NVS region [mem 0xcc9ac000-0xcc9b2fff] (28672 bytes) [ 0.116313] PM: Registering ACPI NVS region [mem 0xdaf7f000-0xdb5f6fff] (6782976 bytes) [ 0.116432] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.116497] pinctrl core: initialized pinctrl subsystem [ 0.116577] RTC time: 14:06:44, date: 10/09/16 [ 0.116661] NET: Registered protocol family 16 [ 0.126741] cpuidle: using governor ladder [ 0.138729] cpuidle: using governor menu [ 0.138733] PCCT header not found. [ 0.138799] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.138800] ACPI: bus type PCI registered [ 0.138802] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.138867] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.138869] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.138877] PCI: Using configuration type 1 for base access [ 0.138906] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on [ 0.151018] ACPI: Added _OSI(Module Device) [ 0.151020] ACPI: Added _OSI(Processor Device) [ 0.151021] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.151022] ACPI: Added _OSI(Processor Aggregator Device) [ 0.153016] ACPI : EC: EC description table is found, configuring boot EC [ 0.153024] ACPI : EC: EC started [ 0.155021] ACPI: Executed 1 blocks of module-level executable AML code [ 0.157551] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.235351] ACPI: Dynamic OEM Table Load: [ 0.235356] ACPI: SSDT 0xFFFF8800D6871000 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711) [ 0.236103] ACPI: Dynamic OEM Table Load: [ 0.236106] ACPI: SSDT 0xFFFF88011A6FA800 0005AA (v01 PmRef ApIst 00003000 INTL 20120711) [ 0.236759] ACPI: Dynamic OEM Table Load: [ 0.236761] ACPI: SSDT 0xFFFF8800D6846C00 000119 (v01 PmRef ApCst 00003000 INTL 20120711) [ 0.237669] ACPI: Interpreter enabled [ 0.237675] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150930/hwxface-580) [ 0.237681] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580) [ 0.237697] ACPI: (supports S0 S3 S4 S5) [ 0.237698] ACPI: Using IOAPIC for interrupt routing [ 0.237719] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.256609] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.256613] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.256797] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME] [ 0.256901] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability] [ 0.256903] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.257174] PCI host bridge to bus 0000:00 [ 0.257177] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.257178] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.257179] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.257180] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] [ 0.257181] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] [ 0.257182] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 0.257183] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 0.257184] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] [ 0.257185] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] [ 0.257186] pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff window] [ 0.257187] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.257193] pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000 [ 0.257259] pci 0000:00:02.0: [8086:0416] type 00 class 0x030000 [ 0.257269] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit] [ 0.257274] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.257278] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] [ 0.257353] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300 [ 0.257363] pci 0000:00:03.0: reg 0x10: [mem 0xf7e14000-0xf7e17fff 64bit] [ 0.257439] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 0.257462] pci 0000:00:14.0: reg 0x10: [mem 0xf7e00000-0xf7e0ffff 64bit] [ 0.257508] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.257535] pci 0000:00:14.0: System wakeup disabled by ACPI [ 0.257563] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 [ 0.257587] pci 0000:00:16.0: reg 0x10: [mem 0xf7e1e000-0xf7e1e00f 64bit] [ 0.257634] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.257693] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 0.257718] pci 0000:00:1a.0: reg 0x10: [mem 0xf7e1c000-0xf7e1c3ff] [ 0.257783] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.257839] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300 [ 0.257861] pci 0000:00:1b.0: reg 0x10: [mem 0xf7e10000-0xf7e13fff 64bit] [ 0.257912] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.257966] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 [ 0.258023] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.258104] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400 [ 0.258159] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.258210] pci 0000:00:1c.2: System wakeup disabled by ACPI [ 0.258237] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400 [ 0.258293] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.258342] pci 0000:00:1c.3: System wakeup disabled by ACPI [ 0.258374] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 0.258399] pci 0000:00:1d.0: reg 0x10: [mem 0xf7e1b000-0xf7e1b3ff] [ 0.258464] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.258519] pci 0000:00:1f.0: [8086:8c49] type 00 class 0x060100 [ 0.258655] pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601 [ 0.258674] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7] [ 0.258681] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3] [ 0.258687] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097] [ 0.258694] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083] [ 0.258700] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f] [ 0.258707] pci 0000:00:1f.2: reg 0x24: [mem 0xf7e1a000-0xf7e1a7ff] [ 0.258731] pci 0000:00:1f.2: PME# supported from D3hot [ 0.258780] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 0.258794] pci 0000:00:1f.3: reg 0x10: [mem 0xf7e19000-0xf7e190ff 64bit] [ 0.258816] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f] [ 0.258927] acpiphp: Slot [1] registered [ 0.258932] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.259000] pci 0000:02:00.0: [168c:0036] type 00 class 0x028000 [ 0.259039] pci 0000:02:00.0: reg 0x10: [mem 0xf7d00000-0xf7d7ffff 64bit] [ 0.259089] pci 0000:02:00.0: reg 0x30: [mem 0xf7d80000-0xf7d8ffff pref] [ 0.259139] pci 0000:02:00.0: supports D1 D2 [ 0.259141] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.259171] pci 0000:02:00.0: System wakeup disabled by ACPI [ 0.266921] pci 0000:00:1c.2: PCI bridge to [bus 02] [ 0.266927] pci 0000:00:1c.2: bridge window [mem 0xf7d00000-0xf7dfffff] [ 0.267004] pci 0000:03:00.0: [1969:10a0] type 00 class 0x020000 [ 0.267052] pci 0000:03:00.0: reg 0x10: [mem 0xf7c00000-0xf7c3ffff 64bit] [ 0.267065] pci 0000:03:00.0: reg 0x18: [io 0xe000-0xe07f] [ 0.267155] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.267189] pci 0000:03:00.0: System wakeup disabled by ACPI [ 0.274938] pci 0000:00:1c.3: PCI bridge to [bus 03] [ 0.274942] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff] [ 0.274945] pci 0000:00:1c.3: bridge window [mem 0xf7c00000-0xf7cfffff] [ 0.283046] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12) [ 0.283086] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 12) *0, disabled. [ 0.283126] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 7 10 12) [ 0.283164] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 12) [ 0.283202] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12) *0, disabled. [ 0.283239] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 12) [ 0.283276] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 12) [ 0.283313] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 12) [ 0.283574] ACPI: Enabled 3 GPEs in block 00 to 3F [ 0.283733] ACPI : EC: GPE = 0x1d, I/O: command/status = 0x66, data = 0x62 [ 0.283823] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 0.283825] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.283827] vgaarb: loaded [ 0.283828] vgaarb: bridge control possible 0000:00:02.0 [ 0.284049] SCSI subsystem initialized [ 0.284086] libata version 3.00 loaded. [ 0.284103] ACPI: bus type USB registered [ 0.284117] usbcore: registered new interface driver usbfs [ 0.284124] usbcore: registered new interface driver hub [ 0.284138] usbcore: registered new device driver usb [ 0.284263] PCI: Using ACPI for IRQ routing [ 0.285542] PCI: pci_cache_line_size set to 64 bytes [ 0.285579] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff] [ 0.285581] e820: reserve RAM buffer [mem 0xcc9ac000-0xcfffffff] [ 0.285581] e820: reserve RAM buffer [mem 0xccdde000-0xcfffffff] [ 0.285582] e820: reserve RAM buffer [mem 0xdad4d000-0xdbffffff] [ 0.285583] e820: reserve RAM buffer [mem 0x11fe00000-0x11fffffff] [ 0.285663] NetLabel: Initializing [ 0.285664] NetLabel: domain hash size = 128 [ 0.285664] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.285672] NetLabel: unlabeled traffic allowed by default [ 0.285725] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.285729] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.288865] amd_nb: Cannot enumerate AMD northbridges [ 0.288879] clocksource: Switched to clocksource hpet [ 0.293345] AppArmor: AppArmor Filesystem Enabled [ 0.293400] pnp: PnP ACPI init [ 0.293595] system 00:00: [io 0x0680-0x069f] has been reserved [ 0.293597] system 00:00: [io 0xffff] has been reserved [ 0.293598] system 00:00: [io 0xffff] has been reserved [ 0.293599] system 00:00: [io 0xffff] has been reserved [ 0.293600] system 00:00: [io 0x1c00-0x1cfe] has been reserved [ 0.293602] system 00:00: [io 0x1d00-0x1dfe] has been reserved [ 0.293603] system 00:00: [io 0x1e00-0x1efe] has been reserved [ 0.293604] system 00:00: [io 0x1f00-0x1ffe] has been reserved [ 0.293605] system 00:00: [io 0x1800-0x18fe] could not be reserved [ 0.293606] system 00:00: [io 0x164e-0x164f] has been reserved [ 0.293609] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.293628] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.293662] system 00:02: [io 0x1854-0x1857] has been reserved [ 0.293664] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.293699] system 00:03: [io 0x04d0-0x04d1] has been reserved [ 0.293701] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.293746] system 00:04: [io 0x04d0-0x04d1] has been reserved [ 0.293748] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.293790] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.293792] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.293793] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved [ 0.293795] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.293835] pnp 00:06: Plug and Play ACPI device, IDs TOS0320 TOS0310 TOS1110 PNP0f13 (active) [ 0.293861] pnp 00:07: Plug and Play ACPI device, IDs TOS1103 PNPc030 PNP0303 (active) [ 0.293884] system 00:08: [io 0x0240-0x0259] has been reserved [ 0.293885] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.294225] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.294226] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.294228] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.294229] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.294230] system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.294231] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.294233] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.294234] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.294235] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved [ 0.294236] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.294238] system 00:09: [mem 0xf7fdf000-0xf7fdffff] has been reserved [ 0.294239] system 00:09: [mem 0xf7fe0000-0xf7feffff] has been reserved [ 0.294241] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.301061] system 00:0a: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.301063] system 00:0a: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.301065] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.301209] pnp: PnP ACPI: found 11 devices [ 0.307233] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.307248] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000 [ 0.307250] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000 [ 0.307251] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000 [ 0.307265] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000 [ 0.307267] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000 [ 0.307268] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 0.307269] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 0.307271] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000 [ 0.307272] pci 0000:00:1c.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000 [ 0.307276] pci 0000:00:1c.0: BAR 14: assigned [mem 0xdf200000-0xdf3fffff] [ 0.307281] pci 0000:00:1c.0: BAR 15: assigned [mem 0xdf400000-0xdf5fffff 64bit pref] [ 0.307283] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff] [ 0.307284] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.307286] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.307290] pci 0000:00:1c.0: bridge window [mem 0xdf200000-0xdf3fffff] [ 0.307294] pci 0000:00:1c.0: bridge window [mem 0xdf400000-0xdf5fffff 64bit pref] [ 0.307299] pci 0000:00:1c.2: PCI bridge to [bus 02] [ 0.307303] pci 0000:00:1c.2: bridge window [mem 0xf7d00000-0xf7dfffff] [ 0.307309] pci 0000:00:1c.3: PCI bridge to [bus 03] [ 0.307312] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff] [ 0.307316] pci 0000:00:1c.3: bridge window [mem 0xf7c00000-0xf7cfffff] [ 0.307323] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.307325] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.307326] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.307327] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window] [ 0.307328] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window] [ 0.307329] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window] [ 0.307330] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window] [ 0.307331] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window] [ 0.307332] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window] [ 0.307333] pci_bus 0000:00: resource 13 [mem 0xdf200000-0xfeafffff window] [ 0.307334] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] [ 0.307335] pci_bus 0000:01: resource 1 [mem 0xdf200000-0xdf3fffff] [ 0.307336] pci_bus 0000:01: resource 2 [mem 0xdf400000-0xdf5fffff 64bit pref] [ 0.307338] pci_bus 0000:02: resource 1 [mem 0xf7d00000-0xf7dfffff] [ 0.307339] pci_bus 0000:03: resource 0 [io 0xe000-0xefff] [ 0.307340] pci_bus 0000:03: resource 1 [mem 0xf7c00000-0xf7cfffff] [ 0.307362] NET: Registered protocol family 2 [ 0.307478] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.307539] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.307630] TCP: Hash tables configured (established 32768 bind 32768) [ 0.307648] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.307661] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.307699] NET: Registered protocol family 1 [ 0.307710] pci 0000:00:02.0: Video device with shadowed ROM [ 0.344970] pci 0000:03:00.0: set MSI_INTX_DISABLE_BUG flag [ 0.344975] PCI: CLS 64 bytes, default 64 [ 0.345014] Trying to unpack rootfs image as initramfs... [ 0.782408] Freeing initrd memory: 37484K (ffff8800336ba000 - ffff880035b55000) [ 0.782443] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.782445] software IO TLB [mem 0xd6d4d000-0xdad4d000] (64MB) mapped at [ffff8800d6d4d000-ffff8800dad4cfff] [ 0.782500] RAPL PMU detected, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer [ 0.782501] hw unit of domain pp0-core 2^-14 Joules [ 0.782502] hw unit of domain package 2^-14 Joules [ 0.782502] hw unit of domain dram 2^-14 Joules [ 0.782503] hw unit of domain pp1-gpu 2^-14 Joules [ 0.782578] Scanning for low memory corruption every 60 seconds [ 0.782854] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.782883] audit: initializing netlink subsys (disabled) [ 0.782895] audit: type=2000 audit(1476022004.756:1): initialized [ 0.783179] Initialise system trusted keyring [ 0.783261] HugeTLB registered 1 GB page size, pre-allocated 0 pages [ 0.783262] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.784339] zbud: loaded [ 0.784487] VFS: Disk quotas dquot_6.6.0 [ 0.784510] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.784692] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.784889] fuse init (API version 7.23) [ 0.784990] Key type big_key registered [ 0.785010] Allocating IMA MOK and blacklist keyrings. [ 0.785350] Key type asymmetric registered [ 0.785352] Asymmetric key parser 'x509' registered [ 0.785377] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 0.785401] io scheduler noop registered [ 0.785402] io scheduler deadline registered (default) [ 0.785424] io scheduler cfq registered [ 0.785762] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.785766] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.785786] vesafb: mode is 1366x768x32, linelength=5504, pages=0 [ 0.785787] vesafb: scrolling: redraw [ 0.785788] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.785797] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90000800000, using 4160k, total 4160k [ 0.785865] Console: switching to colour frame buffer device 170x48 [ 0.785875] fb0: VESA VGA frame buffer device [ 0.785886] intel_idle: MWAIT substates: 0x42120 [ 0.785887] intel_idle: v0.4.1 model 0x3C [ 0.785888] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.786079] ACPI: AC Adapter [AC0] (on-line) [ 0.786127] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 0.792898] ACPI: Lid Switch [LID] [ 0.792929] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 0.792932] ACPI: Power Button [SLPB] [ 0.792959] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.792961] ACPI: Power Button [PWRF] [ 0.809138] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.809140] ACPI: Thermal Zone [THRM] (41 C) [ 0.809173] GHES: HEST is not enabled! [ 0.809256] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.810626] Linux agpgart interface v0.103 [ 0.812540] brd: module loaded [ 0.813338] loop: module loaded [ 0.813485] libphy: Fixed MDIO Bus: probed [ 0.813487] tun: Universal TUN/TAP device driver, 1.6 [ 0.813488] tun: (C) 1999-2004 Max Krasnyansky [ 0.813516] PPP generic driver version 2.4.2 [ 0.813557] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.813563] ehci-pci: EHCI PCI platform driver [ 0.813657] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.813661] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.813672] ehci-pci 0000:00:1a.0: debug port 2 [ 0.817582] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 0.817598] ehci-pci 0000:00:1a.0: irq 21, io mem 0xf7e1c000 [ 0.828870] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.828905] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.828907] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.828908] usb usb1: Product: EHCI Host Controller [ 0.828909] usb usb1: Manufacturer: Linux 4.4.0-36-generic ehci_hcd [ 0.828910] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.829008] hub 1-0:1.0: USB hub found [ 0.829012] hub 1-0:1.0: 2 ports detected [ 0.829186] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.829190] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.829200] ehci-pci 0000:00:1d.0: debug port 2 [ 0.833082] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 0.833090] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7e1b000 [ 0.844916] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.844961] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.844962] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.844964] usb usb2: Product: EHCI Host Controller [ 0.844965] usb usb2: Manufacturer: Linux 4.4.0-36-generic ehci_hcd [ 0.844966] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.845085] hub 2-0:1.0: USB hub found [ 0.845089] hub 2-0:1.0: 2 ports detected [ 0.845207] ehci-platform: EHCI generic platform driver [ 0.845222] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.845225] ohci-pci: OHCI PCI platform driver [ 0.845235] ohci-platform: OHCI generic platform driver [ 0.845242] uhci_hcd: USB Universal Host Controller Interface driver [ 0.845358] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.845363] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.846435] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810 [ 0.846439] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 0.846505] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.846506] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.846507] usb usb3: Product: xHCI Host Controller [ 0.846508] usb usb3: Manufacturer: Linux 4.4.0-36-generic xhci-hcd [ 0.846509] usb usb3: SerialNumber: 0000:00:14.0 [ 0.846582] hub 3-0:1.0: USB hub found [ 0.846598] hub 3-0:1.0: 14 ports detected [ 0.846712] ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x000000008) is beyond end of object (length 0x1) (20150930/exoparg2-424) [ 0.846715] ACPI Error: Method parse/execution failed [\_SB.XPLD] (Node ffff88011b0e6000), AE_AML_PACKAGE_LIMIT (20150930/psparse-542) [ 0.846719] ACPI Error: Method parse/execution failed [\_SB.PCI0.XHC.RHUB.HS01._PLD] (Node ffff88011b0e2eb0), AE_AML_PACKAGE_LIMIT (20150930/psparse-542) [ 0.846825] ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x000000008) is beyond end of object (length 0x1) (20150930/exoparg2-424) [ 0.846827] ACPI Error: Method parse/execution failed [\_SB.XPLD] (Node ffff88011b0e6000), AE_AML_PACKAGE_LIMIT (20150930/psparse-542) [ 0.846830] ACPI Error: Method parse/execution failed [\_SB.PCI0.XHC.RHUB.HS02._PLD] (Node ffff88011b0e2f78), AE_AML_PACKAGE_LIMIT (20150930/psparse-542) [ 0.847167] ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x000000008) is beyond end of object (length 0x1) (20150930/exoparg2-424) [ 0.847169] ACPI Error: Method parse/execution failed [\_SB.XPLD] (Node ffff88011b0e6000), AE_AML_PACKAGE_LIMIT (20150930/psparse-542) [ 0.847172] ACPI Error: Method parse/execution failed [\_SB.PCI0.XHC.RHUB.HS05._PLD] (Node ffff88011b0e41e0), AE_AML_PACKAGE_LIMIT (20150930/psparse-542) [ 0.847271] ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x000000008) is beyond end of object (length 0x1) (20150930/exoparg2-424) [ 0.847273] ACPI Error: Method parse/execution failed [\_SB.XPLD] (Node ffff88011b0e6000), AE_AML_PACKAGE_LIMIT (20150930/psparse-542) [ 0.847276] ACPI Error: Method parse/execution failed [\_SB.PCI0.XHC.RHUB.HS06._PLD] (Node ffff88011b0e42a8), AE_AML_PACKAGE_LIMIT (20150930/psparse-542) [ 0.847376] ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x000000008) is beyond end of object (length 0x1) (20150930/exoparg2-424) [ 0.847378] ACPI Error: Method parse/execution failed [\_SB.XPLD] (Node ffff88011b0e6000), AE_AML_PACKAGE_LIMIT (20150930/psparse-542) [ 0.847381] ACPI Error: Method parse/execution failed [\_SB.PCI0.XHC.RHUB.HS07._PLD] (Node ffff88011b0e4370), AE_AML_PACKAGE_LIMIT (20150930/psparse-542) [ 0.847480] ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x000000008) is beyond end of object (length 0x1) (20150930/exoparg2-424) [ 0.847482] ACPI Error: Method parse/execution failed [\_SB.XPLD] (Node ffff88011b0e6000), AE_AML_PACKAGE_LIMIT (20150930/psparse-542) [ 0.847484] ACPI Error: Method parse/execution failed [\_SB.PCI0.XHC.RHUB.HS08._PLD] (Node ffff88011b0e4438), AE_AML_PACKAGE_LIMIT (20150930/psparse-542) [ 0.847584] ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x000000008) is beyond end of object (length 0x1) (20150930/exoparg2-424) [ 0.847587] ACPI Error: Method parse/execution failed [\_SB.XPLD] (Node ffff88011b0e6000), AE_AML_PACKAGE_LIMIT (20150930/psparse-542) [ 0.847589] ACPI Error: Method parse/execution failed [\_SB.PCI0.XHC.RHUB.HS09._PLD] (Node ffff88011b0e4500), AE_AML_PACKAGE_LIMIT (20150930/psparse-542) [ 0.847688] ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x000000008) is beyond end of object (length 0x1) (20150930/exoparg2-424) [ 0.847690] ACPI Error: Method parse/execution failed [\_SB.XPLD] (Node ffff88011b0e6000), AE_AML_PACKAGE_LIMIT (20150930/psparse-542) [ 0.847693] ACPI Error: Method parse/execution failed [\_SB.PCI0.XHC.RHUB.HS10._PLD] (Node ffff88011b0e45c8), AE_AML_PACKAGE_LIMIT (20150930/psparse-542) [ 0.847791] ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x000000008) is beyond end of object (length 0x1) (20150930/exoparg2-424) [ 0.847793] ACPI Error: Method parse/execution failed [\_SB.XPLD] (Node ffff88011b0e6000), AE_AML_PACKAGE_LIMIT (20150930/psparse-542) [ 0.847796] ACPI Error: Method parse/execution failed [\_SB.PCI0.XHC.RHUB.HS11._PLD] (Node ffff88011b0e4690), AE_AML_PACKAGE_LIMIT (20150930/psparse-542) [ 0.847895] ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x000000008) is beyond end of object (length 0x1) (20150930/exoparg2-424) [ 0.847897] ACPI Error: Method parse/execution failed [\_SB.XPLD] (Node ffff88011b0e6000), AE_AML_PACKAGE_LIMIT (20150930/psparse-542) [ 0.847900] ACPI Error: Method parse/execution failed [\_SB.PCI0.XHC.RHUB.HS12._PLD] (Node ffff88011b0e4758), AE_AML_PACKAGE_LIMIT (20150930/psparse-542) [ 0.847998] ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x000000008) is beyond end of object (length 0x1) (20150930/exoparg2-424) [ 0.848000] ACPI Error: Method parse/execution failed [\_SB.XPLD] (Node ffff88011b0e6000), AE_AML_PACKAGE_LIMIT (20150930/psparse-542) [ 0.848003] ACPI Error: Method parse/execution failed [\_SB.PCI0.XHC.RHUB.HS13._PLD] (Node ffff88011b0e4820), AE_AML_PACKAGE_LIMIT (20150930/psparse-542) [ 0.848102] ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x000000008) is beyond end of object (length 0x1) (20150930/exoparg2-424) [ 0.848104] ACPI Error: Method parse/execution failed [\_SB.XPLD] (Node ffff88011b0e6000), AE_AML_PACKAGE_LIMIT (20150930/psparse-542) [ 0.848107] ACPI Error: Method parse/execution failed [\_SB.PCI0.XHC.RHUB.HS14._PLD] (Node ffff88011b0e48e8), AE_AML_PACKAGE_LIMIT (20150930/psparse-542) [ 0.848213] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.848215] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.848243] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 0.848244] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.848245] usb usb4: Product: xHCI Host Controller [ 0.848246] usb usb4: Manufacturer: Linux 4.4.0-36-generic xhci-hcd [ 0.848246] usb usb4: SerialNumber: 0000:00:14.0 [ 0.848319] hub 4-0:1.0: USB hub found [ 0.848329] hub 4-0:1.0: 4 ports detected [ 0.848575] ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x000000008) is beyond end of object (length 0x1) (20150930/exoparg2-424) [ 0.848578] ACPI Error: Method parse/execution failed [\_SB.PCI0.XHC.RHUB.SSP2._PLD] (Node ffff88011b0e4b40), AE_AML_PACKAGE_LIMIT (20150930/psparse-542) [ 0.848686] ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x000000008) is beyond end of object (length 0x1) (20150930/exoparg2-424) [ 0.848688] ACPI Error: Method parse/execution failed [\_SB.XPLD] (Node ffff88011b0e6000), AE_AML_PACKAGE_LIMIT (20150930/psparse-542) [ 0.848691] ACPI Error: Method parse/execution failed [\_SB.PCI0.XHC.RHUB.SSP3._PLD] (Node ffff88011b0e4c08), AE_AML_PACKAGE_LIMIT (20150930/psparse-542) [ 0.848790] ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x000000008) is beyond end of object (length 0x1) (20150930/exoparg2-424) [ 0.848792] ACPI Error: Method parse/execution failed [\_SB.XPLD] (Node ffff88011b0e6000), AE_AML_PACKAGE_LIMIT (20150930/psparse-542) [ 0.848795] ACPI Error: Method parse/execution failed [\_SB.PCI0.XHC.RHUB.SSP4._PLD] (Node ffff88011b0e4cd0), AE_AML_PACKAGE_LIMIT (20150930/psparse-542) [ 0.848900] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.852806] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.852809] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.852934] mousedev: PS/2 mouse device common for all mice [ 0.853054] rtc_cmos 00:01: RTC can wake from S4 [ 0.853165] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 0.853188] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.853194] i2c /dev entries driver [ 0.853232] device-mapper: uevent: version 1.0.3 [ 0.853299] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com [ 0.853312] Intel P-state driver initializing. [ 0.853471] ledtrig-cpu: registered to indicate activity on CPUs [ 0.854332] NET: Registered protocol family 10 [ 0.854718] NET: Registered protocol family 17 [ 0.854749] Key type dns_resolver registered [ 0.855202] microcode: CPU0 sig=0x306c3, pf=0x10, revision=0x1e [ 0.855223] microcode: CPU1 sig=0x306c3, pf=0x10, revision=0x1e [ 0.855246] microcode: CPU2 sig=0x306c3, pf=0x10, revision=0x1e [ 0.855267] microcode: CPU3 sig=0x306c3, pf=0x10, revision=0x1e [ 0.855350] microcode: Microcode Update Driver: v2.01 , Peter Oruba [ 0.855717] registered taskstats version 1 [ 0.855753] Loading compiled-in X.509 certificates [ 0.858051] Loaded X.509 cert 'Build time autogenerated kernel key: 181cd957879f68b474ab1d0c92722cd44e756f77' [ 0.858093] ACPI: Battery Slot [BAT0] (battery present) [ 0.858102] zswap: loaded using pool lzo/zbud [ 0.861700] Key type trusted registered [ 0.864682] Key type encrypted registered [ 0.864688] AppArmor: AppArmor sha1 policy hashing enabled [ 0.864692] ima: No TPM chip found, activating TPM-bypass! [ 0.864707] evm: HMAC attrs: 0x1 [ 0.865020] Magic number: 4:250:131 [ 0.865068] acpi device:06: hash matches [ 0.865071] acpi PNP0C02:03: hash matches [ 0.865117] rtc_cmos 00:01: setting system clock to 2016-10-09 14:06:45 UTC (1476022005) [ 0.865164] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.865165] EDD information not available. [ 0.865222] PM: Hibernation image not present or could not be loaded. [ 0.866056] Freeing unused kernel memory: 1480K (ffffffff81f42000 - ffffffff820b4000) [ 0.866057] Write protecting the kernel read-only data: 14336k [ 0.866392] Freeing unused kernel memory: 1832K (ffff880001836000 - ffff880001a00000) [ 0.866698] Freeing unused kernel memory: 152K (ffff880001dda000 - ffff880001e00000) [ 0.875498] random: systemd-udevd urandom read with 3 bits of entropy available [ 0.893595] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED [ 0.905921] wmi: Mapper loaded [ 0.942854] [drm] Initialized drm 1.1.0 20060810 [ 0.943589] ahci 0000:00:1f.2: version 3.0 [ 0.943777] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x30 impl SATA mode [ 0.943781] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst [ 0.954591] scsi host0: ahci [ 0.958789] scsi host1: ahci [ 0.961326] scsi host2: ahci [ 0.972878] scsi host3: ahci [ 0.973300] alx 0000:03:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [20:25:64:35:c8:52] [ 0.975954] scsi host4: ahci [ 0.978361] scsi host5: ahci [ 0.978433] ata1: DUMMY [ 0.978435] ata2: DUMMY [ 0.978437] ata3: DUMMY [ 0.978437] ata4: DUMMY [ 0.978441] ata5: SATA max UDMA/133 abar m2048@0xf7e1a000 port 0xf7e1a300 irq 25 [ 0.978444] ata6: SATA max UDMA/133 abar m2048@0xf7e1a000 port 0xf7e1a380 irq 25 [ 0.981422] [drm] Memory usable by graphics device = 2048M [ 0.981427] checking generic (e0000000 410000) vs hw (e0000000 10000000) [ 0.981428] fb: switching to inteldrmfb from VESA VGA [ 0.981456] Console: switching to colour dummy device 80x25 [ 0.981525] [drm] Replacing VGA console driver [ 0.986988] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 0.986991] [drm] Driver supports precise vblank timestamp query. [ 0.987522] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 0.995126] AVX2 version of gcm_enc/dec engaged. [ 0.995130] AES CTR mode by8 optimization enabled [ 1.048748] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 1.051965] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input4 [ 1.052041] [drm] Initialized i915 1.6.0 20151010 for 0000:00:02.0 on minor 0 [ 1.088157] fbcon: inteldrmfb (fb0) is primary device [ 1.088231] Console: switching to colour frame buffer device 170x48 [ 1.088254] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 1.140905] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.160905] usb 3-5: new high-speed USB device number 2 using xhci_hcd [ 1.160917] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.273297] usb 1-1: New USB device found, idVendor=8087, idProduct=8008 [ 1.273300] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.273670] hub 1-1:1.0: USB hub found [ 1.273841] hub 1-1:1.0: 6 ports detected [ 1.291051] usb 3-5: New USB device found, idVendor=058f, idProduct=6366 [ 1.291055] usb 3-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.291056] usb 3-5: Product: Flash Card Reader/Writer [ 1.291058] usb 3-5: Manufacturer: Generic [ 1.291059] usb 3-5: SerialNumber: 058F63666485 [ 1.293949] usb 2-1: New USB device found, idVendor=8087, idProduct=8000 [ 1.293952] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.294818] hub 2-1:1.0: USB hub found [ 1.294867] hub 2-1:1.0: 8 ports detected [ 1.295580] usb-storage 3-5:1.0: USB Mass Storage device detected [ 1.295656] scsi host6: usb-storage 3-5:1.0 [ 1.295724] usbcore: registered new interface driver usb-storage [ 1.296863] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.296882] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.296907] usbcore: registered new interface driver uas [ 1.298040] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1.298043] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1.298045] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1.302741] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1.302744] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1.302746] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1.304983] ata6.00: ATAPI: TSSTcorp CDDVDW SU-208FB, TF01, max UDMA/100 [ 1.309958] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1.309961] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1.309963] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1.314263] ata6.00: configured for UDMA/100 [ 1.341198] ata5.00: ATA-8: HGST HTS545050A7E380, GG2OAH20, max UDMA/133 [ 1.341202] ata5.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.342583] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1.342587] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1.342589] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1.343733] ata5.00: configured for UDMA/133 [ 1.343969] scsi 4:0:0:0: Direct-Access ATA HGST HTS545050A7 AH20 PQ: 0 ANSI: 5 [ 1.344218] sd 4:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 1.344221] sd 4:0:0:0: [sda] 4096-byte physical blocks [ 1.344250] sd 4:0:0:0: Attached scsi generic sg0 type 0 [ 1.344289] sd 4:0:0:0: [sda] Write Protect is off [ 1.344293] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.344321] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.346155] scsi 5:0:0:0: CD-ROM TSSTcorp CDDVDW SU-208FB TF01 PQ: 0 ANSI: 5 [ 1.368360] sda: sda1 sda2 < sda5 > [ 1.368870] sd 4:0:0:0: [sda] Attached SCSI disk [ 1.372820] sr 5:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.372823] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.372983] sr 5:0:0:0: Attached scsi CD-ROM sr0 [ 1.373051] sr 5:0:0:0: Attached scsi generic sg1 type 5 [ 1.460869] usb 3-10: new high-speed USB device number 3 using xhci_hcd [ 1.548904] usb 1-1.2: new full-speed USB device number 3 using ehci-pci [ 1.614379] usb 3-10: New USB device found, idVendor=04f2, idProduct=b3b1 [ 1.614382] usb 3-10: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 1.614384] usb 3-10: Product: TOSHIBA Web Camera - HD [ 1.614385] usb 3-10: Manufacturer: Chicony Electronics Co.,Ltd. [ 1.614386] usb 3-10: SerialNumber: 0x0001 [ 1.642162] usb 1-1.2: New USB device found, idVendor=0930, idProduct=0220 [ 1.642177] usb 1-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.780886] tsc: Refined TSC clocksource calibration: 2494.224 MHz [ 1.780890] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23f3e9a353a, max_idle_ns: 440795330815 ns [ 1.955189] psmouse serio1: synaptics: queried max coordinates: x [..5692], y [..4680] [ 2.016102] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000/0x0, board id: 0, fw id: 582762 [ 2.016107] psmouse serio1: synaptics: Toshiba Satellite C50-A512 detected, limiting rate to 40pps. [ 2.055275] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6 [ 2.293767] scsi 6:0:0:0: Direct-Access Multiple Card Reader 1.00 PQ: 0 ANSI: 4 [ 2.294073] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 2.295091] sd 6:0:0:0: [sdb] Attached SCSI removable disk [ 2.780967] clocksource: Switched to clocksource tsc [ 2.828754] psmouse serio1: synaptics: queried max coordinates: x [..5692], y [..4680] [ 2.890331] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000/0x0, board id: 0, fw id: 582762 [ 2.890336] psmouse serio1: synaptics: Toshiba Satellite C50-A512 detected, limiting rate to 40pps. [ 2.929591] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8 [ 3.430042] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input9 [ 6.825982] random: nonblocking pool is initialized [ 10.321082] NET: Registered protocol family 38 [ 24.225936] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) [ 25.460226] systemd[1]: RTC configured in localtime, applying delta of 180 minutes to system time. [ 26.027008] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN) [ 26.027116] systemd[1]: Detected architecture x86-64. [ 26.045875] systemd[1]: Set hostname to . [ 28.758938] systemd[1]: Listening on udev Kernel Socket. [ 28.759005] systemd[1]: Listening on fsck to fsckd communication Socket. [ 28.759081] systemd[1]: Created slice User and Session Slice. [ 28.759126] systemd[1]: Created slice System Slice. [ 28.759188] systemd[1]: Listening on Journal Audit Socket. [ 28.759216] systemd[1]: Listening on Journal Socket (/dev/log). [ 28.759244] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 28.759251] systemd[1]: Reached target User and Group Name Lookups. [ 28.759273] systemd[1]: Listening on udev Control Socket. [ 28.759364] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 28.759424] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 28.759442] systemd[1]: Listening on Syslog Socket. [ 28.759449] systemd[1]: Reached target Slices. [ 28.759499] systemd[1]: Created slice system-systemd\x2dcryptsetup.slice. [ 28.759526] systemd[1]: Listening on Journal Socket. [ 28.775766] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 28.812855] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ 28.827677] systemd[1]: Mounting Huge Pages File System... [ 28.828124] systemd[1]: Started Read required files in advance. [ 28.828708] systemd[1]: Starting Uncomplicated firewall... [ 28.829025] systemd[1]: Starting Journal Service... [ 28.844021] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 28.844073] systemd[1]: Listening on LVM2 poll daemon socket. [ 28.844428] systemd[1]: Started Braille Device Support. [ 28.844995] systemd[1]: Starting Set console keymap... [ 28.845019] systemd[1]: Reached target Remote File Systems (Pre). [ 28.845034] systemd[1]: Reached target Remote File Systems. [ 28.845410] systemd[1]: Mounting POSIX Message Queue File System... [ 28.845812] systemd[1]: Mounting Debug File System... [ 28.845871] systemd[1]: Listening on LVM2 metadata daemon socket. [ 28.846241] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... [ 28.887664] systemd[1]: Starting Load Kernel Modules... [ 29.266451] systemd[1]: Started Create list of required static device nodes for the current kernel. [ 29.275725] systemd[1]: Starting Create Static Device Nodes in /dev... [ 29.580404] systemd[1]: Started Uncomplicated firewall. [ 30.223512] lp: driver loaded but no devices found [ 30.224836] systemd[1]: Mounted POSIX Message Queue File System. [ 30.224904] systemd[1]: Mounted Huge Pages File System. [ 30.224935] systemd[1]: Mounted Debug File System. [ 30.253822] ppdev: user-space parallel port driver [ 30.401087] systemd[1]: Started Load Kernel Modules. [ 30.415674] systemd[1]: Starting Apply Kernel Variables... [ 30.416184] systemd[1]: Mounting FUSE Control File System... [ 30.418180] systemd[1]: Mounted FUSE Control File System. [ 30.712633] systemd[1]: Started Journal Service. [ 39.418805] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro [ 39.601385] systemd-journald[1148]: Received request to flush runtime journal from PID 1 [ 39.939153] EDAC MC: Ver: 3.0.0 [ 39.940567] EDAC ie31200: No ECC support [ 39.990263] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 40.000041] toshiba_bluetooth: Toshiba ACPI Bluetooth device driver [ 40.036719] toshiba_acpi: Toshiba Laptop ACPI Extras version 0.23 [ 40.132481] toshiba_acpi: WMI event detected, hotkeys will not be monitored [ 40.158648] toshiba_acpi: Supported laptop features: touchpad special-function-keys panel-power-on usb3 [ 40.245808] intel_rapl: Found RAPL domain package [ 40.245811] intel_rapl: Found RAPL domain core [ 40.245813] intel_rapl: Found RAPL domain uncore [ 40.245815] intel_rapl: Found RAPL domain dram [ 40.245817] intel_rapl: RAPL package 0 domain package locked by BIOS [ 40.245819] intel_rapl: RAPL package 0 domain dram locked by BIOS [ 40.324226] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 40.331704] input: Toshiba WMI hotkeys as /devices/virtual/input/input10 [ 40.332126] toshiba_wmi: Toshiba WMI Hotkey Driver [ 40.345781] snd_hda_codec_idt hdaudioC1D0: autoconfig for 92HD95: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker [ 40.345787] snd_hda_codec_idt hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 40.345789] snd_hda_codec_idt hdaudioC1D0: hp_outs=1 (0xa/0x0/0x0/0x0/0x0) [ 40.345791] snd_hda_codec_idt hdaudioC1D0: mono: mono_out=0x0 [ 40.345792] snd_hda_codec_idt hdaudioC1D0: inputs: [ 40.345794] snd_hda_codec_idt hdaudioC1D0: Internal Mic=0xe [ 40.345796] snd_hda_codec_idt hdaudioC1D0: Mic=0xb [ 40.358037] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11 [ 40.358101] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12 [ 40.440147] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13 [ 41.314939] ath: phy0: WB335 2-ANT card detected [ 41.314941] ath: phy0: Set BT/WLAN RX diversity capability [ 41.322176] ath: phy0: Enable LNA combining [ 41.323371] ath: phy0: ASPM enabled: 0x42 [ 41.323372] ath: EEPROM regdomain: 0x65 [ 41.323373] ath: EEPROM indicates we should expect a direct regpair map [ 41.323375] ath: Country alpha2 being used: 00 [ 41.323375] ath: Regpair used: 0x65 [ 41.326210] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 41.326511] ieee80211 phy0: Atheros AR9565 Rev:1 mem=0xffffc90000b00000, irq=18 [ 41.505705] media: Linux media interface: v0.10 [ 41.610622] Bluetooth: Core ver 2.21 [ 41.610642] NET: Registered protocol family 31 [ 41.610643] Bluetooth: HCI device and connection manager initialized [ 41.610647] Bluetooth: HCI socket layer initialized [ 41.610649] Bluetooth: L2CAP socket layer initialized [ 41.610655] Bluetooth: SCO socket layer initialized [ 41.615374] usbcore: registered new interface driver btusb [ 41.624082] Linux video capture interface: v2.00 [ 41.933727] uvcvideo: Found UVC 1.00 device TOSHIBA Web Camera - HD (04f2:b3b1) [ 41.935161] input: TOSHIBA Web Camera - HD as /devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10:1.0/input/input14 [ 41.935215] usbcore: registered new interface driver uvcvideo [ 41.935216] USB Video Class driver (1.1.1) [ 41.986795] usbcore: registered new interface driver ath3k [ 42.033051] usb 1-1.2: USB disconnect, device number 3 [ 42.230943] usb 1-1.2: new full-speed USB device number 4 using ehci-pci [ 42.268483] cfg80211: World regulatory domain updated: [ 42.268486] cfg80211: DFS Master region: unset [ 42.268487] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 42.268489] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 42.268490] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 42.268492] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 42.268493] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 42.268495] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 42.268496] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 42.268497] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 42.268498] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 44.180349] Adding 4099580k swap on /dev/mapper/cryptswap1. Priority:-1 extents:1 across:4099580k FS [ 44.703390] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem [ 44.770496] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null) [ 45.304310] audit: type=1400 audit(1476011249.938:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=2905 comm="apparmor_parser" [ 45.304317] audit: type=1400 audit(1476011249.938:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=2905 comm="apparmor_parser" [ 45.304504] audit: type=1400 audit(1476011249.938:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=2906 comm="apparmor_parser" [ 45.304510] audit: type=1400 audit(1476011249.938:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=2906 comm="apparmor_parser" [ 45.304515] audit: type=1400 audit(1476011249.938:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=2906 comm="apparmor_parser" [ 45.304520] audit: type=1400 audit(1476011249.938:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=2906 comm="apparmor_parser" [ 45.305157] audit: type=1400 audit(1476011249.938:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/libvirt/virt-aa-helper" pid=2910 comm="apparmor_parser" [ 45.305710] audit: type=1400 audit(1476011249.938:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=2911 comm="apparmor_parser" [ 45.306853] audit: type=1400 audit(1476011249.942:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=2913 comm="apparmor_parser" [ 45.308618] audit: type=1400 audit(1476011249.942:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2914 comm="apparmor_parser" [ 46.353996] cgroup: new mount options do not match the existing superblock, will be ignored [ 47.302732] usb 1-1.2: device descriptor read/64, error -110 [ 52.428418] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 52.440335] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 52.444977] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 52.448239] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 52.499688] usb 1-1.2: New USB device found, idVendor=0930, idProduct=0220 [ 52.499692] usb 1-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 54.927974] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 54.927978] Bluetooth: BNEP filters: protocol multicast [ 54.927982] Bluetooth: BNEP socket layer initialized [ 55.188719] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 56.091481] wlan0: authenticate with 9c:37:f4:48:8c:44 [ 56.103403] wlan0: send auth to 9c:37:f4:48:8c:44 (try 1/3) [ 56.105345] wlan0: authenticated [ 56.106339] wlan0: associate with 9c:37:f4:48:8c:44 (try 1/3) [ 56.109948] wlan0: RX AssocResp from 9c:37:f4:48:8c:44 (capab=0x1411 status=0 aid=2) [ 56.110025] wlan0: associated [ 56.110034] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 56.126119] wlan0: Limiting TX power to 30 (30 - 0) dBm as advertised by 9c:37:f4:48:8c:44 [ 59.056402] ip_tables: (C) 2000-2006 Netfilter Core Team [ 59.068617] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 59.080960] Ebtables v2.0 registered [ 59.260922] cfg80211: World regulatory domain updated: [ 59.260925] cfg80211: DFS Master region: unset [ 59.260926] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 59.260929] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 59.260930] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 59.260931] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 59.260933] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 59.260934] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 59.260936] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 59.260937] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 59.260938] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 60.097888] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel [ 60.101602] vboxdrv: Found 4 processor cores [ 60.122307] vboxdrv: TSC mode is Invariant, tentative frequency 2494212909 Hz [ 60.122311] vboxdrv: Successfully loaded version 5.0.24_Ubuntu (interface 0x00240000) [ 60.126681] VBoxNetFlt: Successfully started. [ 60.131229] VBoxNetAdp: Successfully started. [ 60.131419] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 60.139787] VBoxPciLinuxInit [ 60.142061] vboxpci: IOMMU not found (not registered) [ 60.198272] device virbr0-nic entered promiscuous mode [ 60.457514] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 60.521508] virbr0: port 1(virbr0-nic) entered listening state [ 60.521525] virbr0: port 1(virbr0-nic) entered listening state [ 61.426251] virbr0: port 1(virbr0-nic) entered disabled state [ 62.118459] device virbr0-nic left promiscuous mode [ 62.118480] virbr0: port 1(virbr0-nic) entered disabled state [ 109.498214] Bluetooth: RFCOMM TTY layer initialized [ 109.498222] Bluetooth: RFCOMM socket layer initialized [ 109.498227] Bluetooth: RFCOMM ver 1.11 [ 111.888689] snd_hda_codec_hdmi hdaudioC0D0: HDMI: ELD buf size is 0, force 128 [ 111.888726] snd_hda_codec_hdmi hdaudioC0D0: HDMI: invalid ELD data byte 0 [ 1607.709549] perf interrupt took too long (2543 > 2500), lowering kernel.perf_event_max_sample_rate to 50000 [ 6172.081426] audit_printk_skb: 60 callbacks suppressed [ 6172.081429] audit: type=1400 audit(1476028256.324:32): apparmor="DENIED" operation="connect" profile="/usr/bin/evince" pid=6686 comm="pool" family="unix" sock_type="stream" protocol=0 requested_mask="send receive connect" denied_mask="send connect" addr=none peer_addr="@/tmp/ibus/dbus-1iyhrs4q" peer="unconfined" [ 6181.694742] audit: type=1400 audit(1476028265.936:33): apparmor="DENIED" operation="connect" profile="/usr/bin/evince" pid=6706 comm="pool" family="unix" sock_type="stream" protocol=0 requested_mask="send receive connect" denied_mask="send connect" addr=none peer_addr="@/tmp/ibus/dbus-1iyhrs4q" peer="unconfined" [ 6185.014044] audit: type=1400 audit(1476028269.256:34): apparmor="DENIED" operation="connect" profile="/usr/bin/evince" pid=6721 comm="pool" family="unix" sock_type="stream" protocol=0 requested_mask="send receive connect" denied_mask="send connect" addr=none peer_addr="@/tmp/ibus/dbus-1iyhrs4q" peer="unconfined" [ 6190.265513] audit: type=1400 audit(1476028274.509:35): apparmor="DENIED" operation="connect" profile="/usr/bin/evince" pid=6737 comm="pool" family="unix" sock_type="stream" protocol=0 requested_mask="send receive connect" denied_mask="send connect" addr=none peer_addr="@/tmp/ibus/dbus-1iyhrs4q" peer="unconfined" [ 6259.750520] audit: type=1400 audit(1476028343.997:36): apparmor="DENIED" operation="connect" profile="/usr/bin/evince" pid=6783 comm="pool" family="unix" sock_type="stream" protocol=0 requested_mask="send receive connect" denied_mask="send connect" addr=none peer_addr="@/tmp/ibus/dbus-1iyhrs4q" peer="unconfined" [ 6263.097442] audit: type=1400 audit(1476028347.345:37): apparmor="DENIED" operation="connect" profile="/usr/bin/evince" pid=6799 comm="pool" family="unix" sock_type="stream" protocol=0 requested_mask="send receive connect" denied_mask="send connect" addr=none peer_addr="@/tmp/ibus/dbus-1iyhrs4q" peer="unconfined" [ 6276.510182] audit: type=1400 audit(1476028360.758:38): apparmor="DENIED" operation="connect" profile="/usr/bin/evince" pid=6843 comm="pool" family="unix" sock_type="stream" protocol=0 requested_mask="send receive connect" denied_mask="send connect" addr=none peer_addr="@/tmp/ibus/dbus-1iyhrs4q" peer="unconfined" [ 6869.468821] toshiba_acpi: Unknown event received 8e [ 6869.554886] wlan0: deauthenticating from 9c:37:f4:48:8c:44 by local choice (Reason: 3=DEAUTH_LEAVING) [ 6869.821621] cfg80211: World regulatory domain updated: [ 6869.821624] cfg80211: DFS Master region: unset [ 6869.821625] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 6869.821628] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 6869.821629] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 6869.821631] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 6869.821632] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 6869.821634] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 6869.821635] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 6869.821636] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 6869.821637] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 6870.416323] PM: Syncing filesystems ... done. [ 6872.250165] PM: Preparing system for sleep (mem) [ 6872.250319] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 6872.252245] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 6872.253432] PM: Suspending system (mem) [ 6872.253451] Suspending console(s) (use no_console_suspend to debug) [ 6872.253662] sd 4:0:0:0: [sda] Synchronizing SCSI cache [ 6872.419788] sd 4:0:0:0: [sda] Stopping disk [ 6873.012702] PM: suspend of devices complete after 759.157 msecs [ 6873.028627] PM: late suspend of devices complete after 15.922 msecs [ 6873.029489] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [ 6873.044667] PM: noirq suspend of devices complete after 16.038 msecs [ 6873.044903] ACPI: Preparing to enter system sleep state S3 [ 6873.052805] ACPI : EC: EC stopped [ 6873.052806] PM: Saving platform NVS memory [ 6873.052827] Disabling non-boot CPUs ... [ 6873.054055] smpboot: CPU 1 is now offline [ 6873.065107] Broke affinity for irq 18 [ 6873.065118] Broke affinity for irq 25 [ 6873.066132] smpboot: CPU 2 is now offline [ 6873.076981] Broke affinity for irq 1 [ 6873.076988] Broke affinity for irq 9 [ 6873.076992] Broke affinity for irq 12 [ 6873.076996] Broke affinity for irq 18 [ 6873.077003] Broke affinity for irq 23 [ 6873.077005] Broke affinity for irq 24 [ 6873.077006] Broke affinity for irq 25 [ 6873.077006] Broke affinity for irq 26 [ 6873.078012] smpboot: CPU 3 is now offline [ 6873.094073] ACPI: Low-level resume complete [ 6873.094118] ACPI : EC: EC started [ 6873.094118] PM: Restoring platform NVS memory [ 6873.096572] microcode: CPU0 microcode updated early to revision 0x1e, date = 2015-08-13 [ 6873.096595] Enabling non-boot CPUs ... [ 6873.114278] x86: Booting SMP configuration: [ 6873.114279] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 6873.115734] microcode: CPU1 microcode updated early to revision 0x1e, date = 2015-08-13 [ 6873.119006] cache: parent cpu1 should not be sleeping [ 6873.119146] CPU1 is up [ 6873.138325] smpboot: Booting Node 0 Processor 2 APIC 0x1 [ 6873.141823] cache: parent cpu2 should not be sleeping [ 6873.141964] CPU2 is up [ 6873.158267] smpboot: Booting Node 0 Processor 3 APIC 0x3 [ 6873.161763] cache: parent cpu3 should not be sleeping [ 6873.161860] CPU3 is up [ 6873.165199] ACPI: Waking up from system sleep state S3 [ 6873.202286] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [ 6873.214337] PM: noirq resume of devices complete after 16.078 msecs [ 6873.236775] PM: early resume of devices complete after 22.428 msecs [ 6873.237042] ath: phy0: ASPM enabled: 0x42 [ 6873.238451] sd 4:0:0:0: [sda] Starting disk [ 6873.262168] rtc_cmos 00:01: System wakeup disabled by ACPI [ 6873.285315] xhci_hcd 0000:00:14.0: port 4 resume PLC timeout [ 6873.466112] usb 1-1.2: reset full-speed USB device number 4 using ehci-pci [ 6873.510311] usb 3-10: reset high-speed USB device number 3 using xhci_hcd [ 6873.558111] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 6873.558390] usb 1-1.2: device firmware changed [ 6873.566011] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 6873.566013] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 6873.566014] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 6873.580813] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 6873.580815] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 6873.580816] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 6873.583053] ata6.00: configured for UDMA/100 [ 6873.750255] usb 3-5: reset high-speed USB device number 2 using xhci_hcd [ 6873.861964] psmouse serio1: synaptics: queried max coordinates: x [..5692], y [..4680] [ 6873.898135] PM: resume of devices complete after 661.393 msecs [ 6873.898362] PM: Finishing wakeup. [ 6873.898363] Restarting tasks ... [ 6873.900088] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 6873.900423] pci_bus 0000:01: Allocating resources [ 6873.900438] pci_bus 0000:02: Allocating resources [ 6873.900453] pcieport 0000:00:1c.2: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000 [ 6873.900456] pcieport 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000 [ 6873.900463] pci_bus 0000:03: Allocating resources [ 6873.900475] pcieport 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000 [ 6873.900477] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 6873.900481] pcieport 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 6873.900483] pcieport 0000:00:1c.2: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 6873.900485] pcieport 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 6873.900487] pcieport 0000:00:1c.3: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 6873.900489] pcieport 0000:00:1c.2: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000 [ 6873.900490] pcieport 0000:00:1c.2: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000 [ 6873.900500] pcieport 0000:00:1c.2: BAR 15: assigned [mem 0xdf600000-0xdf7fffff 64bit pref] [ 6873.900506] pcieport 0000:00:1c.3: BAR 15: assigned [mem 0xdf800000-0xdf9fffff 64bit pref] [ 6873.900510] pcieport 0000:00:1c.2: BAR 13: assigned [io 0x3000-0x3fff] [ 6873.900853] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 6873.900870] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 6873.900958] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 6873.901039] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 6873.901100] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 6873.901142] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 6873.902160] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 6873.902474] pci_bus 0000:01: Allocating resources [ 6873.902489] pci_bus 0000:02: Allocating resources [ 6873.902503] pci_bus 0000:03: Allocating resources [ 6873.902514] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 6873.902871] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 6873.902891] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 6873.902986] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 6873.903072] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 6873.903141] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 6873.903196] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 6873.906364] usb 1-1.2: USB disconnect, device number 4 [ 6873.906956] done. [ 6873.978076] usb 1-1.2: new full-speed USB device number 5 using ehci-pci [ 6874.071355] usb 1-1.2: New USB device found, idVendor=0930, idProduct=0220 [ 6874.071358] usb 1-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 6875.526001] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 6875.527139] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 6875.527143] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 6875.527145] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 6875.529287] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 6875.529289] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 6875.529291] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 6875.530261] ata5.00: configured for UDMA/133 [ 6876.054206] usb 1-1.2: USB disconnect, device number 5 [ 6876.257957] usb 1-1.2: new full-speed USB device number 6 using ehci-pci [ 6876.739379] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 6876.754489] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 6876.755438] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 6876.755887] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 6876.798632] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 6877.707513] wlan0: authenticate with 9c:37:f4:48:8c:44 [ 6877.719345] wlan0: send auth to 9c:37:f4:48:8c:44 (try 1/3) [ 6877.721293] wlan0: authenticated [ 6877.721890] wlan0: associate with 9c:37:f4:48:8c:44 (try 1/3) [ 6877.725484] wlan0: RX AssocResp from 9c:37:f4:48:8c:44 (capab=0x1411 status=0 aid=3) [ 6877.725563] wlan0: associated [ 6877.725610] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 6877.787470] wlan0: Limiting TX power to 30 (30 - 0) dBm as advertised by 9c:37:f4:48:8c:44 [ 6880.880035] cfg80211: World regulatory domain updated: [ 6880.880037] cfg80211: DFS Master region: unset [ 6880.880038] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 6880.880040] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 6880.880041] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 6880.880042] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 6880.880043] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 6880.880044] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 6880.880046] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 6880.880046] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 6880.880047] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 6881.329705] usb 1-1.2: device descriptor read/64, error -110 [ 6886.526343] usb 1-1.2: New USB device found, idVendor=0930, idProduct=0220 [ 6886.526347] usb 1-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 7076.005436] toshiba_acpi: Unknown event received 8e [ 7076.092316] wlan0: deauthenticating from 9c:37:f4:48:8c:44 by local choice (Reason: 3=DEAUTH_LEAVING) [ 7076.104687] cfg80211: World regulatory domain updated: [ 7076.104690] cfg80211: DFS Master region: unset [ 7076.104691] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 7076.104693] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 7076.104694] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 7076.104695] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 7076.104696] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 7076.104698] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 7076.104699] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 7076.104700] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 7076.104701] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 7086.250608] PM: Syncing filesystems ... done. [ 7087.442548] PM: Preparing system for sleep (mem) [ 7087.442673] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 7087.444519] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done. [ 7087.445448] PM: Suspending system (mem) [ 7087.445470] Suspending console(s) (use no_console_suspend to debug) [ 7087.445701] sd 4:0:0:0: [sda] Synchronizing SCSI cache [ 7087.601504] sd 4:0:0:0: [sda] Stopping disk [ 7088.200973] PM: suspend of devices complete after 755.776 msecs [ 7088.224984] PM: late suspend of devices complete after 24.021 msecs [ 7088.226025] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [ 7088.241001] PM: noirq suspend of devices complete after 16.023 msecs [ 7088.241270] ACPI: Preparing to enter system sleep state S3 [ 7088.249134] ACPI : EC: EC stopped [ 7088.249134] PM: Saving platform NVS memory [ 7088.249157] Disabling non-boot CPUs ... [ 7088.250400] smpboot: CPU 1 is now offline [ 7088.261418] Broke affinity for irq 25 [ 7088.262431] smpboot: CPU 2 is now offline [ 7088.273314] Broke affinity for irq 1 [ 7088.273321] Broke affinity for irq 9 [ 7088.273325] Broke affinity for irq 12 [ 7088.273329] Broke affinity for irq 18 [ 7088.273332] Broke affinity for irq 21 [ 7088.273336] Broke affinity for irq 23 [ 7088.273337] Broke affinity for irq 24 [ 7088.273338] Broke affinity for irq 25 [ 7088.273339] Broke affinity for irq 26 [ 7088.274350] smpboot: CPU 3 is now offline [ 7088.286353] ACPI: Low-level resume complete [ 7088.286397] ACPI : EC: EC started [ 7088.286398] PM: Restoring platform NVS memory [ 7088.288894] microcode: CPU0 microcode updated early to revision 0x1e, date = 2015-08-13 [ 7088.288914] Enabling non-boot CPUs ... [ 7088.306537] x86: Booting SMP configuration: [ 7088.306538] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 7088.307992] microcode: CPU1 microcode updated early to revision 0x1e, date = 2015-08-13 [ 7088.311264] cache: parent cpu1 should not be sleeping [ 7088.311404] CPU1 is up [ 7088.330573] smpboot: Booting Node 0 Processor 2 APIC 0x1 [ 7088.334074] cache: parent cpu2 should not be sleeping [ 7088.334215] CPU2 is up [ 7088.350509] smpboot: Booting Node 0 Processor 3 APIC 0x3 [ 7088.354004] cache: parent cpu3 should not be sleeping [ 7088.354102] CPU3 is up [ 7088.357439] ACPI: Waking up from system sleep state S3 [ 7088.390461] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [ 7088.402529] PM: noirq resume of devices complete after 16.059 msecs [ 7088.436859] PM: early resume of devices complete after 34.337 msecs [ 7088.437159] ath: phy0: ASPM enabled: 0x42 [ 7088.438228] sd 4:0:0:0: [sda] Starting disk [ 7088.462334] rtc_cmos 00:01: System wakeup disabled by ACPI [ 7088.481352] xhci_hcd 0000:00:14.0: port 4 resume PLC timeout [ 7088.666189] usb 1-1.2: reset full-speed USB device number 6 using ehci-pci [ 7088.710323] usb 3-5: reset high-speed USB device number 2 using xhci_hcd [ 7088.758369] usb 1-1.2: device firmware changed [ 7088.766141] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 7088.773954] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 7088.773956] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 7088.773958] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 7088.788942] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 7088.788944] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 7088.788945] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 7088.791169] ata6.00: configured for UDMA/100 [ 7088.950223] usb 3-10: reset high-speed USB device number 3 using xhci_hcd [ 7089.056311] psmouse serio1: synaptics: queried max coordinates: x [..5692], y [..4680] [ 7089.102085] PM: resume of devices complete after 665.593 msecs [ 7089.102257] PM: Finishing wakeup. [ 7089.102258] Restarting tasks ... done. [ 7089.107896] usb 1-1.2: USB disconnect, device number 6 [ 7089.110814] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 7089.111167] pci_bus 0000:01: Allocating resources [ 7089.111183] pci_bus 0000:02: Allocating resources [ 7089.111202] pci_bus 0000:03: Allocating resources [ 7089.111214] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 7089.111591] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 7089.111610] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 7089.111709] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 7089.111796] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 7089.111865] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 7089.111920] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 7089.112617] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 7089.112956] pci_bus 0000:01: Allocating resources [ 7089.112971] pci_bus 0000:02: Allocating resources [ 7089.112990] pci_bus 0000:03: Allocating resources [ 7089.113001] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 7089.113371] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 7089.113389] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 7089.113489] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 7089.113574] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 7089.113642] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 7089.113690] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 7089.177897] usb 1-1.2: new full-speed USB device number 7 using ehci-pci [ 7089.271089] usb 1-1.2: New USB device found, idVendor=0930, idProduct=0220 [ 7089.271093] usb 1-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 7089.465331] usb 1-1.2: USB disconnect, device number 7 [ 7089.673602] usb 1-1.2: new full-speed USB device number 8 using ehci-pci [ 7090.713029] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 7090.714184] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 7090.714190] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 7090.714193] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 7090.716249] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 7090.716252] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 7090.716254] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 7090.717357] ata5.00: configured for UDMA/133 [ 7091.063926] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 7091.079037] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 7091.079864] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 7091.080237] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 7091.126035] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 7092.050991] wlan0: authenticate with 9c:37:f4:48:8c:44 [ 7092.062849] wlan0: send auth to 9c:37:f4:48:8c:44 (try 1/3) [ 7092.064810] wlan0: authenticated [ 7092.068276] wlan0: associate with 9c:37:f4:48:8c:44 (try 1/3) [ 7092.071891] wlan0: RX AssocResp from 9c:37:f4:48:8c:44 (capab=0x1411 status=0 aid=3) [ 7092.071969] wlan0: associated [ 7092.072012] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 7092.157872] wlan0: Limiting TX power to 30 (30 - 0) dBm as advertised by 9c:37:f4:48:8c:44 [ 7094.742815] usb 1-1.2: device descriptor read/64, error -110 [ 7095.221583] cfg80211: World regulatory domain updated: [ 7095.221586] cfg80211: DFS Master region: unset [ 7095.221587] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 7095.221588] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 7095.221589] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 7095.221590] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 7095.221591] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 7095.221593] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 7095.221594] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 7095.221594] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 7095.221595] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 7099.936970] usb 1-1.2: New USB device found, idVendor=0930, idProduct=0220 [ 7099.936974] usb 1-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 9958.752694] snd_hda_codec_hdmi hdaudioC0D0: HDMI: ELD buf size is 0, force 128 [ 9958.752732] snd_hda_codec_hdmi hdaudioC0D0: HDMI: invalid ELD data byte 0 [13207.275029] perf interrupt took too long (5058 > 5000), lowering kernel.perf_event_max_sample_rate to 25000 [19074.055004] toshiba_acpi: Unknown event received 8e [19076.656870] wlan0: deauthenticating from 9c:37:f4:48:8c:44 by local choice (Reason: 3=DEAUTH_LEAVING) [19076.668367] snd_hda_codec_hdmi hdaudioC0D0: HDMI: ELD buf size is 0, force 128 [19076.668391] snd_hda_codec_hdmi hdaudioC0D0: HDMI: invalid ELD data byte 0 [19080.098495] cfg80211: World regulatory domain updated: [19080.098499] cfg80211: DFS Master region: unset [19080.098500] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [19080.098502] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [19080.098503] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [19080.098504] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [19080.098506] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [19080.098507] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [19080.098508] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [19080.098509] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [19080.098510] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [19086.036789] PM: Syncing filesystems ... done. [19087.657000] PM: Preparing system for sleep (mem) [19087.657135] Freezing user space processes ... (elapsed 0.335 seconds) done. [19087.992173] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [19087.993395] PM: Suspending system (mem) [19087.993413] Suspending console(s) (use no_console_suspend to debug) [19087.993636] sd 4:0:0:0: [sda] Synchronizing SCSI cache [19088.158911] sd 4:0:0:0: [sda] Stopping disk [19088.774874] PM: suspend of devices complete after 781.364 msecs [19088.790789] PM: late suspend of devices complete after 15.911 msecs [19088.792029] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [19088.806838] PM: noirq suspend of devices complete after 16.046 msecs [19088.807096] ACPI: Preparing to enter system sleep state S3 [19088.814954] ACPI : EC: EC stopped [19088.814955] PM: Saving platform NVS memory [19088.814977] Disabling non-boot CPUs ... [19088.816265] smpboot: CPU 1 is now offline [19088.827315] Broke affinity for irq 18 [19088.827320] Broke affinity for irq 21 [19088.827325] Broke affinity for irq 24 [19088.827328] Broke affinity for irq 26 [19088.828346] smpboot: CPU 2 is now offline [19088.839765] Broke affinity for irq 1 [19088.839779] Broke affinity for irq 9 [19088.839785] Broke affinity for irq 12 [19088.839791] Broke affinity for irq 18 [19088.839797] Broke affinity for irq 21 [19088.839803] Broke affinity for irq 23 [19088.839806] Broke affinity for irq 24 [19088.839809] Broke affinity for irq 25 [19088.839811] Broke affinity for irq 26 [19088.840848] smpboot: CPU 3 is now offline [19088.857049] ACPI: Low-level resume complete [19088.857093] ACPI : EC: EC started [19088.857093] PM: Restoring platform NVS memory [19088.859543] microcode: CPU0 microcode updated early to revision 0x1e, date = 2015-08-13 [19088.859566] Enabling non-boot CPUs ... [19088.876837] x86: Booting SMP configuration: [19088.876838] smpboot: Booting Node 0 Processor 1 APIC 0x2 [19088.878294] microcode: CPU1 microcode updated early to revision 0x1e, date = 2015-08-13 [19088.881568] cache: parent cpu1 should not be sleeping [19088.881712] CPU1 is up [19088.904875] smpboot: Booting Node 0 Processor 2 APIC 0x1 [19088.908383] cache: parent cpu2 should not be sleeping [19088.908486] CPU2 is up [19088.924932] smpboot: Booting Node 0 Processor 3 APIC 0x3 [19088.928613] cache: parent cpu3 should not be sleeping [19088.928734] CPU3 is up [19088.932051] ACPI: Waking up from system sleep state S3 [19088.968824] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [19088.980917] PM: noirq resume of devices complete after 16.111 msecs [19089.007433] PM: early resume of devices complete after 26.505 msecs [19089.008766] ath: phy0: ASPM enabled: 0x42 [19089.009051] sd 4:0:0:0: [sda] Starting disk [19089.028754] rtc_cmos 00:01: System wakeup disabled by ACPI [19089.055964] xhci_hcd 0000:00:14.0: port 4 resume PLC timeout [19089.240660] usb 1-1.2: reset full-speed USB device number 8 using ehci-pci [19089.280888] usb 3-5: reset high-speed USB device number 2 using xhci_hcd [19089.332996] usb 1-1.2: device firmware changed [19089.336669] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [19089.344460] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [19089.344461] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [19089.344463] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [19089.359308] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [19089.359310] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [19089.359311] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [19089.361531] ata6.00: configured for UDMA/100 [19089.520887] usb 3-10: reset high-speed USB device number 3 using xhci_hcd [19089.622670] psmouse serio1: synaptics: queried max coordinates: x [..5692], y [..4680] [19089.672823] PM: resume of devices complete after 665.420 msecs [19089.672995] PM: Finishing wakeup. [19089.672996] Restarting tasks ... [19089.675052] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [19089.675407] pci_bus 0000:01: Allocating resources [19089.675421] pci_bus 0000:02: Allocating resources [19089.675443] pci_bus 0000:03: Allocating resources [19089.675454] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [19089.675813] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [19089.675830] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [19089.675931] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [19089.676019] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [19089.676089] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [19089.676138] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [19089.679649] done. [19089.681322] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [19089.681678] pci_bus 0000:01: Allocating resources [19089.681692] pci_bus 0000:02: Allocating resources [19089.681712] pci_bus 0000:03: Allocating resources [19089.681724] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [19089.683794] usb 1-1.2: USB disconnect, device number 8 [19089.684206] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [19089.684232] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [19089.684328] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [19089.684470] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [19089.684588] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [19089.684669] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [19089.756636] usb 1-1.2: new full-speed USB device number 9 using ehci-pci [19089.849920] usb 1-1.2: New USB device found, idVendor=0930, idProduct=0220 [19089.849923] usb 1-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [19091.288552] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [19091.289674] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [19091.289677] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [19091.289679] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [19091.291738] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [19091.291740] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [19091.291741] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [19091.292687] ata5.00: configured for UDMA/133 [19096.433757] usb 1-1.2: USB disconnect, device number 9 [19096.632331] usb 1-1.2: new full-speed USB device number 10 using ehci-pci [19097.189384] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [19097.204436] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [19097.253643] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [19097.254028] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [19099.500357] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [19100.630726] wlan0: authenticate with 9c:37:f4:48:8c:44 [19100.645415] wlan0: send auth to 9c:37:f4:48:8c:44 (try 1/3) [19100.647357] wlan0: authenticated [19100.648065] wlan0: associate with 9c:37:f4:48:8c:44 (try 1/3) [19100.651650] wlan0: RX AssocResp from 9c:37:f4:48:8c:44 (capab=0x1411 status=0 aid=2) [19100.651725] wlan0: associated [19100.651758] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [19100.658774] wlan0: Limiting TX power to 30 (30 - 0) dBm as advertised by 9c:37:f4:48:8c:44 [19101.704086] usb 1-1.2: device descriptor read/64, error -110 [19103.802477] cfg80211: World regulatory domain updated: [19103.802480] cfg80211: DFS Master region: unset [19103.802481] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [19103.802483] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [19103.802484] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [19103.802485] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [19103.802486] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [19103.802487] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [19103.802488] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [19103.802489] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [19103.802490] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [19106.901076] usb 1-1.2: New USB device found, idVendor=0930, idProduct=0220 [19106.901079] usb 1-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [19839.195326] audit: type=1400 audit(1476277748.875:39): apparmor="DENIED" operation="connect" profile="/usr/bin/evince" pid=12833 comm="pool" family="unix" sock_type="stream" protocol=0 requested_mask="send receive connect" denied_mask="send connect" addr=none peer_addr="@/tmp/ibus/dbus-w2KjDRqI" peer="unconfined" [21915.439955] usb 3-2: new high-speed USB device number 4 using xhci_hcd [21915.568939] usb 3-2: New USB device found, idVendor=17ef, idProduct=77ea [21915.568943] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [21915.568944] usb 3-2: Product: VIBE Z2 [21915.568946] usb 3-2: Manufacturer: Lenovo [21915.568947] usb 3-2: SerialNumber: 77dea1 [21917.577133] usb 3-2: USB disconnect, device number 4 [21917.847638] usb 3-2: new high-speed USB device number 5 using xhci_hcd [21923.143064] usb 3-2: new high-speed USB device number 6 using xhci_hcd [21923.272003] usb 3-2: New USB device found, idVendor=17ef, idProduct=77ea [21923.272007] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [21923.272009] usb 3-2: Product: VIBE Z2 [21923.272010] usb 3-2: Manufacturer: Lenovo [21923.272011] usb 3-2: SerialNumber: 77dea1 [21958.599022] usb 3-2: USB disconnect, device number 6 [21958.871558] usb 3-2: new high-speed USB device number 7 using xhci_hcd [21959.000233] usb 3-2: New USB device found, idVendor=17ef, idProduct=77ea [21959.000236] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [21959.000237] usb 3-2: Product: VIBE Z2 [21959.000239] usb 3-2: Manufacturer: Lenovo [21959.000240] usb 3-2: SerialNumber: 77dea1 [21959.533379] usb 3-2: USB disconnect, device number 7 [21959.803551] usb 3-2: new high-speed USB device number 8 using xhci_hcd [21959.932524] usb 3-2: New USB device found, idVendor=17ef, idProduct=77ea [21959.932528] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [21959.932529] usb 3-2: Product: VIBE Z2 [21959.932530] usb 3-2: Manufacturer: Lenovo [21959.932531] usb 3-2: SerialNumber: 77dea1 [22016.555158] usb 3-2: USB disconnect, device number 8 [22016.823953] usb 3-2: new high-speed USB device number 9 using xhci_hcd [22016.952806] usb 3-2: New USB device found, idVendor=17ef, idProduct=77ea [22016.952809] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [22016.952810] usb 3-2: Product: VIBE Z2 [22016.952812] usb 3-2: Manufacturer: Lenovo [22016.952813] usb 3-2: SerialNumber: 77dea1 [22065.165268] audit: type=1400 audit(1476279974.915:40): apparmor="DENIED" operation="connect" profile="/usr/bin/evince" pid=13425 comm="pool" family="unix" sock_type="stream" protocol=0 requested_mask="send receive connect" denied_mask="send connect" addr=none peer_addr="@/tmp/ibus/dbus-w2KjDRqI" peer="unconfined" [22157.664196] audit: type=1400 audit(1476280067.416:41): apparmor="DENIED" operation="connect" profile="/usr/bin/evince" pid=13505 comm="pool" family="unix" sock_type="stream" protocol=0 requested_mask="send receive connect" denied_mask="send connect" addr=none peer_addr="@/tmp/ibus/dbus-w2KjDRqI" peer="unconfined" [22401.316488] audit: type=1400 audit(1476280311.070:42): apparmor="DENIED" operation="connect" profile="/usr/bin/evince" pid=13600 comm="pool" family="unix" sock_type="stream" protocol=0 requested_mask="send receive connect" denied_mask="send connect" addr=none peer_addr="@/tmp/ibus/dbus-w2KjDRqI" peer="unconfined" [22454.748187] usb 3-2: USB disconnect, device number 9 [22455.667686] usb 3-2: new high-speed USB device number 13 using xhci_hcd [22460.963126] usb 3-2: new high-speed USB device number 14 using xhci_hcd [22461.092234] usb 3-2: New USB device found, idVendor=17ef, idProduct=77ea [22461.092242] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [22461.092246] usb 3-2: Product: VIBE Z2 [22461.092250] usb 3-2: Manufacturer: Lenovo [22461.092253] usb 3-2: SerialNumber: 77dea1 [22662.371473] usb 3-2: USB disconnect, device number 14 [22662.642612] usb 3-2: new high-speed USB device number 15 using xhci_hcd [22662.771950] usb 3-2: New USB device found, idVendor=17ef, idProduct=77ea [22662.771954] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [22662.771956] usb 3-2: Product: VIBE Z2 [22662.771957] usb 3-2: Manufacturer: Lenovo [22662.771958] usb 3-2: SerialNumber: 77dea1 [22662.980414] usb 3-2: USB disconnect, device number 15 [22663.250624] usb 3-2: new high-speed USB device number 16 using xhci_hcd [22668.546331] usb 3-2: new high-speed USB device number 17 using xhci_hcd [22668.675350] usb 3-2: New USB device found, idVendor=17ef, idProduct=77ea [22668.675353] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [22668.675355] usb 3-2: Product: VIBE Z2 [22668.675356] usb 3-2: Manufacturer: Lenovo [22668.675357] usb 3-2: SerialNumber: 77dea1 [22867.300399] usb 3-2: USB disconnect, device number 17 [22867.578193] usb 3-2: new high-speed USB device number 18 using xhci_hcd [22867.690307] usb 3-2: Device not responding to setup address. [22867.894169] usb 3-2: Device not responding to setup address. [22868.098199] usb 3-2: device not accepting address 18, error -71 [22868.394205] usb 3-2: new high-speed USB device number 20 using xhci_hcd [22868.506318] usb 3-2: Device not responding to setup address. [22868.710214] usb 3-2: Device not responding to setup address. [22868.914224] usb 3-2: device not accepting address 20, error -71 [22869.210201] usb 3-2: new high-speed USB device number 22 using xhci_hcd [22869.339195] usb 3-2: New USB device found, idVendor=17ef, idProduct=77ea [22869.339199] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [22869.339200] usb 3-2: Product: VIBE Z2 [22869.339202] usb 3-2: Manufacturer: Lenovo [22869.339203] usb 3-2: SerialNumber: 77dea1 [22869.739598] usb 3-2: USB disconnect, device number 22 [22870.010115] usb 3-2: new high-speed USB device number 23 using xhci_hcd [22870.139057] usb 3-2: New USB device found, idVendor=17ef, idProduct=77ea [22870.139061] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [22870.139063] usb 3-2: Product: VIBE Z2 [22870.139064] usb 3-2: Manufacturer: Lenovo [22870.139065] usb 3-2: SerialNumber: 77dea1 [22872.603269] usb 3-2: USB disconnect, device number 23 [22872.874038] usb 3-2: new high-speed USB device number 24 using xhci_hcd [22873.003074] usb 3-2: New USB device found, idVendor=17ef, idProduct=77ea [22873.003077] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [22873.003079] usb 3-2: Product: VIBE Z2 [22873.003080] usb 3-2: Manufacturer: Lenovo [22873.003081] usb 3-2: SerialNumber: 77dea1 [22873.038622] usb 3-2: USB disconnect, device number 24 [22873.310116] usb 3-2: new high-speed USB device number 25 using xhci_hcd [22873.439333] usb 3-2: New USB device found, idVendor=17ef, idProduct=77ea [22873.439337] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [22873.439339] usb 3-2: Product: VIBE Z2 [22873.439340] usb 3-2: Manufacturer: Lenovo [22873.439341] usb 3-2: SerialNumber: 77dea1 [23055.314859] usb 3-2: USB disconnect, device number 25 [23055.585811] usb 3-2: new high-speed USB device number 26 using xhci_hcd [23055.714953] usb 3-2: New USB device found, idVendor=17ef, idProduct=77ea [23055.714958] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [23055.714960] usb 3-2: Product: VIBE Z2 [23055.714961] usb 3-2: Manufacturer: Lenovo [23055.714962] usb 3-2: SerialNumber: 77dea1 [23055.972267] usb 3-2: USB disconnect, device number 26 [23056.245808] usb 3-2: new high-speed USB device number 27 using xhci_hcd [23056.374929] usb 3-2: New USB device found, idVendor=17ef, idProduct=77ea [23056.374933] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [23056.374935] usb 3-2: Product: VIBE Z2 [23056.374936] usb 3-2: Manufacturer: Lenovo [23056.374937] usb 3-2: SerialNumber: 77dea1 [23059.535000] usb 3-2: USB disconnect, device number 27 [23059.805741] usb 3-2: new high-speed USB device number 28 using xhci_hcd [23059.934607] usb 3-2: New USB device found, idVendor=17ef, idProduct=77ea [23059.934610] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [23059.934611] usb 3-2: Product: VIBE Z2 [23059.934612] usb 3-2: Manufacturer: Lenovo [23059.934613] usb 3-2: SerialNumber: 77dea1 [23060.677796] usb 3-2: USB disconnect, device number 28 [23060.949768] usb 3-2: new high-speed USB device number 29 using xhci_hcd [23061.078696] usb 3-2: New USB device found, idVendor=17ef, idProduct=77ea [23061.078699] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [23061.078700] usb 3-2: Product: VIBE Z2 [23061.078702] usb 3-2: Manufacturer: Lenovo [23061.078703] usb 3-2: SerialNumber: 77dea1 [23062.007833] usb 3-2: USB disconnect, device number 29 [23062.277697] usb 3-2: new high-speed USB device number 30 using xhci_hcd [23067.573644] usb 3-2: new high-speed USB device number 31 using xhci_hcd [23067.702662] usb 3-2: New USB device found, idVendor=17ef, idProduct=77ea [23067.702666] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [23067.702668] usb 3-2: Product: VIBE Z2 [23067.702669] usb 3-2: Manufacturer: Lenovo [23067.702670] usb 3-2: SerialNumber: 77dea1 [23073.825348] usb 3-2: USB disconnect, device number 31 [23074.097503] usb 3-2: new high-speed USB device number 32 using xhci_hcd [23074.226478] usb 3-2: New USB device found, idVendor=17ef, idProduct=77ea [23074.226482] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [23074.226484] usb 3-2: Product: VIBE Z2 [23074.226485] usb 3-2: Manufacturer: Lenovo [23074.226486] usb 3-2: SerialNumber: 77dea1 [23177.198387] usb 3-2: USB disconnect, device number 32 [23177.467924] usb 3-2: new high-speed USB device number 33 using xhci_hcd [23177.579931] usb 3-2: Device not responding to setup address. [23177.783846] usb 3-2: Device not responding to setup address. [23177.987886] usb 3-2: device not accepting address 33, error -71 [23178.283879] usb 3-2: new high-speed USB device number 35 using xhci_hcd [23178.412870] usb 3-2: New USB device found, idVendor=17ef, idProduct=77ea [23178.412874] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [23178.412876] usb 3-2: Product: VIBE Z2 [23178.412877] usb 3-2: Manufacturer: Lenovo [23178.412878] usb 3-2: SerialNumber: 77dea1 [23216.213116] usb 3-2: USB disconnect, device number 35 [23216.487307] usb 3-2: new high-speed USB device number 36 using xhci_hcd [23216.616214] usb 3-2: New USB device found, idVendor=17ef, idProduct=77ea [23216.616217] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [23216.616219] usb 3-2: Product: VIBE Z2 [23216.616220] usb 3-2: Manufacturer: Lenovo [23216.616221] usb 3-2: SerialNumber: 77dea1 [23217.173636] usb 3-2: USB disconnect, device number 36 [23217.443343] usb 3-2: new high-speed USB device number 37 using xhci_hcd [23217.572114] usb 3-2: New USB device found, idVendor=17ef, idProduct=77ea [23217.572118] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [23217.572119] usb 3-2: Product: VIBE Z2 [23217.572121] usb 3-2: Manufacturer: Lenovo [23217.572122] usb 3-2: SerialNumber: 77dea1 [23218.711133] usb 3-2: USB disconnect, device number 37 [23218.983289] usb 3-2: new high-speed USB device number 38 using xhci_hcd [23224.279192] usb 3-2: new high-speed USB device number 39 using xhci_hcd [23224.408300] usb 3-2: New USB device found, idVendor=17ef, idProduct=77ea [23224.408304] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [23224.408305] usb 3-2: Product: VIBE Z2 [23224.408306] usb 3-2: Manufacturer: Lenovo [23224.408307] usb 3-2: SerialNumber: 77dea1 [23257.957082] usb 3-2: USB disconnect, device number 39 [23258.226764] usb 3-2: new high-speed USB device number 40 using xhci_hcd [23263.522720] usb 3-2: new high-speed USB device number 41 using xhci_hcd [23263.651593] usb 3-2: New USB device found, idVendor=17ef, idProduct=77ea [23263.651596] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [23263.651597] usb 3-2: Product: VIBE Z2 [23263.651598] usb 3-2: Manufacturer: Lenovo [23263.651599] usb 3-2: SerialNumber: 77dea1 [23264.505158] usb 3-2: USB disconnect, device number 41 [23264.778725] usb 3-2: new high-speed USB device number 42 using xhci_hcd [23270.074626] usb 3-2: new high-speed USB device number 43 using xhci_hcd [23270.203803] usb 3-2: New USB device found, idVendor=17ef, idProduct=77ea [23270.203807] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [23270.203809] usb 3-2: Product: VIBE Z2 [23270.203810] usb 3-2: Manufacturer: Lenovo [23270.203811] usb 3-2: SerialNumber: 77dea1 [23432.017782] usb 3-2: USB disconnect, device number 43 [23432.288475] usb 3-2: new high-speed USB device number 44 using xhci_hcd [23432.477444] usb 3-2: New USB device found, idVendor=17ef, idProduct=77ea [23432.477448] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [23432.477449] usb 3-2: Product: VIBE Z2 [23432.477451] usb 3-2: Manufacturer: Lenovo [23432.477452] usb 3-2: SerialNumber: 77dea1 [23491.697426] usb 3-2: USB disconnect, device number 44 [23491.968004] usb 3-2: new high-speed USB device number 45 using xhci_hcd [23492.153038] usb 3-2: New USB device found, idVendor=17ef, idProduct=77ea [23492.153043] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [23492.153045] usb 3-2: Product: VIBE Z2 [23492.153047] usb 3-2: Manufacturer: Lenovo [23492.153049] usb 3-2: SerialNumber: 77dea1 [23718.345139] usb 3-2: USB disconnect, device number 45 [23718.833034] usb 3-2: new high-speed USB device number 47 using xhci_hcd [23724.380501] usb 3-2: new high-speed USB device number 49 using xhci_hcd [23730.143922] usb 3-2: new high-speed USB device number 52 using xhci_hcd [23735.439450] usb 3-2: new high-speed USB device number 53 using xhci_hcd [23735.624748] usb 3-2: New USB device found, idVendor=17ef, idProduct=77ea [23735.624752] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [23735.624753] usb 3-2: Product: VIBE Z2 [23735.624754] usb 3-2: Manufacturer: Lenovo [23735.624755] usb 3-2: SerialNumber: 77dea1 [23954.879820] usb 3-2: USB disconnect, device number 53 [23955.151143] usb 3-2: new high-speed USB device number 54 using xhci_hcd [23955.280239] usb 3-2: New USB device found, idVendor=17ef, idProduct=77ea [23955.280243] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [23955.280245] usb 3-2: Product: VIBE Z2 [23955.280246] usb 3-2: Manufacturer: Lenovo [23955.280247] usb 3-2: SerialNumber: 77dea1 [23956.022400] usb 3-2: USB disconnect, device number 54 [23956.295075] usb 3-2: new high-speed USB device number 55 using xhci_hcd [23956.423783] usb 3-2: New USB device found, idVendor=17ef, idProduct=77ea [23956.423787] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [23956.423789] usb 3-2: Product: VIBE Z2 [23956.423791] usb 3-2: Manufacturer: Lenovo [23956.423793] usb 3-2: SerialNumber: 77dea1 [23956.488053] usb 3-2: USB disconnect, device number 55 [23956.759003] usb 3-2: new high-speed USB device number 56 using xhci_hcd [23956.887838] usb 3-2: New USB device found, idVendor=17ef, idProduct=77ea [23956.887842] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [23956.887843] usb 3-2: Product: VIBE Z2 [23956.887845] usb 3-2: Manufacturer: Lenovo [23956.887846] usb 3-2: SerialNumber: 77dea1 [23957.669818] usb 3-2: USB disconnect, device number 56 [23964.858572] usb 3-2: new high-speed USB device number 89 using xhci_hcd [23970.154268] usb 3-2: new high-speed USB device number 90 using xhci_hcd [23970.283289] usb 3-2: New USB device found, idVendor=17ef, idProduct=77ea [23970.283293] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [23970.283294] usb 3-2: Product: VIBE Z2 [23970.283296] usb 3-2: Manufacturer: Lenovo [23970.283297] usb 3-2: SerialNumber: 77dea1 [23971.272072] usb 3-2: USB disconnect, device number 90 [23971.758185] usb 3-2: new high-speed USB device number 92 using xhci_hcd [23971.887165] usb 3-2: New USB device found, idVendor=17ef, idProduct=77ea [23971.887168] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [23971.887170] usb 3-2: Product: VIBE Z2 [23971.887171] usb 3-2: Manufacturer: Lenovo [23971.887172] usb 3-2: SerialNumber: 77dea1 [23971.992226] usb 3-2: USB disconnect, device number 92 [23972.266119] usb 3-2: new high-speed USB device number 93 using xhci_hcd [23972.394844] usb 3-2: New USB device found, idVendor=17ef, idProduct=77ea [23972.394847] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [23972.394849] usb 3-2: Product: VIBE Z2 [23972.394850] usb 3-2: Manufacturer: Lenovo [23972.394851] usb 3-2: SerialNumber: 77dea1 [23999.786522] usb 3-2: USB disconnect, device number 93 [24000.056575] usb 3-2: new high-speed USB device number 94 using xhci_hcd [24000.185579] usb 3-2: New USB device found, idVendor=17ef, idProduct=77ea [24000.185582] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [24000.185584] usb 3-2: Product: VIBE Z2 [24000.185585] usb 3-2: Manufacturer: Lenovo [24000.185586] usb 3-2: SerialNumber: 77dea1 [24043.876636] usb 3-2: USB disconnect, device number 94 [24044.798177] usb 3-2: new high-speed USB device number 98 using xhci_hcd [24044.929267] usb 3-2: New USB device found, idVendor=17ef, idProduct=77ea [24044.929272] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [24044.929274] usb 3-2: Product: VIBE Z2 [24044.929275] usb 3-2: Manufacturer: Lenovo [24044.929277] usb 3-2: SerialNumber: 77dea1 [24045.095636] usb 3-2: USB disconnect, device number 98 [24045.802119] usb 3-2: new high-speed USB device number 101 using xhci_hcd [24045.930966] usb 3-2: New USB device found, idVendor=17ef, idProduct=77ea [24045.930970] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [24045.930972] usb 3-2: Product: VIBE Z2 [24045.930973] usb 3-2: Manufacturer: Lenovo [24045.930974] usb 3-2: SerialNumber: 77dea1 [24164.860748] usb 3-2: USB disconnect, device number 101 [24173.127993] usb 3-2: new high-speed USB device number 15 using xhci_hcd [24178.455733] usb 3-2: new high-speed USB device number 16 using xhci_hcd [24184.003503] usb 3-2: new high-speed USB device number 18 using xhci_hcd [24184.387485] usb 3-2: new high-speed USB device number 19 using xhci_hcd [24184.574308] usb 3-2: New USB device found, idVendor=17ef, idProduct=77ea [24184.574312] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [24184.574313] usb 3-2: Product: VIBE Z2 [24184.574315] usb 3-2: Manufacturer: Lenovo [24184.574316] usb 3-2: SerialNumber: 77dea1 [24233.249482] usb 3-2: USB disconnect, device number 19 [24242.164982] usb 3-2: new high-speed USB device number 60 using xhci_hcd [24249.004716] usb 3-2: new high-speed USB device number 68 using xhci_hcd [24254.768448] usb 3-2: new high-speed USB device number 71 using xhci_hcd [24265.500011] usb 3-2: new high-speed USB device number 97 using xhci_hcd [24271.259758] usb 3-2: new high-speed USB device number 100 using xhci_hcd [24277.019520] usb 3-2: new high-speed USB device number 103 using xhci_hcd [24283.211274] usb 3-2: new high-speed USB device number 108 using xhci_hcd [24293.074842] usb 3-2: new high-speed USB device number 6 using xhci_hcd [24299.266611] usb 3-2: new high-speed USB device number 11 using xhci_hcd [24305.026434] usb 3-2: new high-speed USB device number 14 using xhci_hcd [24305.213276] usb 3-2: New USB device found, idVendor=17ef, idProduct=77ea [24305.213279] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [24305.213281] usb 3-2: Product: VIBE Z2 [24305.213282] usb 3-2: Manufacturer: Lenovo [24305.213283] usb 3-2: SerialNumber: 77dea1 [24368.356907] usb 3-2: USB disconnect, device number 14 [24368.843788] usb 3-2: new high-speed USB device number 16 using xhci_hcd [24374.139620] usb 3-2: new high-speed USB device number 17 using xhci_hcd [24374.268444] usb 3-2: New USB device found, idVendor=17ef, idProduct=77ea [24374.268447] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [24374.268449] usb 3-2: Product: VIBE Z2 [24374.268450] usb 3-2: Manufacturer: Lenovo [24374.268451] usb 3-2: SerialNumber: 77dea1 [24397.574773] usb 3-2: USB disconnect, device number 17 [24398.062695] usb 3-2: new high-speed USB device number 19 using xhci_hcd [24403.246510] usb 3-2: device descriptor read/all, error -110 [24410.058299] usb 3-2: new high-speed USB device number 51 using xhci_hcd [24419.057882] usb 3-2: new high-speed USB device number 69 using xhci_hcd [24433.897316] usb 3-2: new high-speed USB device number 114 using xhci_hcd [24459.964358] usb 3-2: new high-speed USB device number 87 using xhci_hcd [24480.203593] usb 3-2: new high-speed USB device number 33 using xhci_hcd [24485.531430] usb 3-2: new high-speed USB device number 34 using xhci_hcd [24491.075225] usb 3-2: new high-speed USB device number 36 using xhci_hcd [24496.586987] usb 3-2: new high-speed USB device number 38 using xhci_hcd [24504.506690] usb 3-2: new high-speed USB device number 51 using xhci_hcd [24509.802578] usb 3-2: new high-speed USB device number 52 using xhci_hcd [24509.989081] usb 3-2: New USB device found, idVendor=17ef, idProduct=77ea [24509.989095] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [24509.989096] usb 3-2: Product: VIBE Z2 [24509.989098] usb 3-2: Manufacturer: Lenovo [24509.989099] usb 3-2: SerialNumber: 77dea1 [24576.715282] usb 3-2: USB disconnect, device number 52 [24576.988087] usb 3-2: new high-speed USB device number 53 using xhci_hcd [24577.117023] usb 3-2: New USB device found, idVendor=17ef, idProduct=77ea [24577.117027] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [24577.117029] usb 3-2: Product: VIBE Z2 [24577.117030] usb 3-2: Manufacturer: Lenovo [24577.117031] usb 3-2: SerialNumber: 77dea1 [25387.862315] usb 3-2: USB disconnect, device number 53 [25388.135518] usb 3-2: new high-speed USB device number 54 using xhci_hcd [25388.320722] usb 3-2: New USB device found, idVendor=17ef, idProduct=77ea [25388.320726] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [25388.320728] usb 3-2: Product: VIBE Z2 [25388.320729] usb 3-2: Manufacturer: Lenovo [25388.320730] usb 3-2: SerialNumber: 77dea1 [25730.796771] usb 3-2: USB disconnect, device number 54 [26290.186187] wlan0: deauthenticated from 9c:37:f4:48:8c:44 (Reason: 7=CLASS3_FRAME_FROM_NONASSOC_STA) [26290.588298] wlan0: authenticate with 9c:37:f4:48:8c:44 [26290.600214] wlan0: send auth to 9c:37:f4:48:8c:44 (try 1/3) [26290.602225] wlan0: authenticated [26290.604293] wlan0: associate with 9c:37:f4:48:8c:44 (try 1/3) [26290.607914] wlan0: RX AssocResp from 9c:37:f4:48:8c:44 (capab=0x1411 status=0 aid=2) [26290.607998] wlan0: associated [26290.682904] wlan0: Limiting TX power to 30 (30 - 0) dBm as advertised by 9c:37:f4:48:8c:44 [26290.824649] cfg80211: World regulatory domain updated: [26290.824658] cfg80211: DFS Master region: unset [26290.824662] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [26290.824668] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [26290.824672] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [26290.824675] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [26290.824680] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [26290.824684] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [26290.824688] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [26290.824692] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [26290.824696] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [26293.978977] cfg80211: World regulatory domain updated: [26293.978980] cfg80211: DFS Master region: unset [26293.978981] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [26293.978983] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [26293.978984] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [26293.978985] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [26293.978986] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [26293.978987] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [26293.978988] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [26293.978989] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [26293.978990] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [26588.105040] usb 3-2: new high-speed USB device number 55 using xhci_hcd [26588.234060] usb 3-2: New USB device found, idVendor=17ef, idProduct=77ea [26588.234065] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [26588.234067] usb 3-2: Product: VIBE Z2 [26588.234069] usb 3-2: Manufacturer: Lenovo [26588.234071] usb 3-2: SerialNumber: 77dea1 [26724.275112] audit: type=1400 audit(1476284634.266:43): apparmor="DENIED" operation="connect" profile="/usr/bin/evince" pid=16556 comm="pool" family="unix" sock_type="stream" protocol=0 requested_mask="send receive connect" denied_mask="send connect" addr=none peer_addr="@/tmp/ibus/dbus-w2KjDRqI" peer="unconfined" [26742.209913] usb 3-2: USB disconnect, device number 55 [28775.586788] snd_hda_codec_hdmi hdaudioC0D0: HDMI: ELD buf size is 0, force 128 [28775.586827] snd_hda_codec_hdmi hdaudioC0D0: HDMI: invalid ELD data byte 0 [33173.478658] QXcbEventReader[18099]: segfault at 7f1b8adc3629 ip 00007f1b8adc3629 sp 00007f1b88a70d20 error 14 in locale-archive[7f1b8ae73000+2d9000] [34594.599658] toshiba_acpi: Unknown event received 8e [34600.509192] wlan0: deauthenticating from 9c:37:f4:48:8c:44 by local choice (Reason: 3=DEAUTH_LEAVING) [34612.972712] cfg80211: World regulatory domain updated: [34612.972715] cfg80211: DFS Master region: unset [34612.972716] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [34612.972718] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [34612.972719] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [34612.972720] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [34612.972721] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [34612.972723] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [34612.972724] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [34612.972725] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [34612.972726] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [34618.354987] PM: Syncing filesystems ... done. [34629.500620] PM: Preparing system for sleep (mem) [34629.500921] Freezing user space processes ... (elapsed 1.697 seconds) done. [34631.198672] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [34631.200025] PM: Suspending system (mem) [34631.200047] Suspending console(s) (use no_console_suspend to debug) [34631.200322] sd 4:0:0:0: [sda] Synchronizing SCSI cache [34631.257203] sd 4:0:0:0: [sda] Stopping disk [34631.874511] PM: suspend of devices complete after 674.361 msecs [34631.890522] PM: late suspend of devices complete after 16.004 msecs [34631.892037] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [34631.906530] PM: noirq suspend of devices complete after 16.002 msecs [34631.906985] ACPI: Preparing to enter system sleep state S3 [34631.914693] ACPI : EC: EC stopped [34631.914694] PM: Saving platform NVS memory [34631.914727] Disabling non-boot CPUs ... [34631.916110] smpboot: CPU 1 is now offline [34631.927025] Broke affinity for irq 18 [34631.927034] Broke affinity for irq 23 [34631.927038] Broke affinity for irq 25 [34631.928059] smpboot: CPU 2 is now offline [34631.938899] Broke affinity for irq 1 [34631.938907] Broke affinity for irq 9 [34631.938911] Broke affinity for irq 12 [34631.938915] Broke affinity for irq 18 [34631.938919] Broke affinity for irq 21 [34631.938923] Broke affinity for irq 23 [34631.938925] Broke affinity for irq 24 [34631.938926] Broke affinity for irq 25 [34631.938927] Broke affinity for irq 26 [34631.939937] smpboot: CPU 3 is now offline [34631.956139] ACPI: Low-level resume complete [34631.956183] ACPI : EC: EC started [34631.956183] PM: Restoring platform NVS memory [34631.958623] microcode: CPU0 microcode updated early to revision 0x1e, date = 2015-08-13 [34631.958643] Enabling non-boot CPUs ... [34631.976164] x86: Booting SMP configuration: [34631.976165] smpboot: Booting Node 0 Processor 1 APIC 0x2 [34631.977621] microcode: CPU1 microcode updated early to revision 0x1e, date = 2015-08-13 [34631.980898] cache: parent cpu1 should not be sleeping [34631.981041] CPU1 is up [34632.004202] smpboot: Booting Node 0 Processor 2 APIC 0x1 [34632.007708] cache: parent cpu2 should not be sleeping [34632.007807] CPU2 is up [34632.024256] smpboot: Booting Node 0 Processor 3 APIC 0x3 [34632.027927] cache: parent cpu3 should not be sleeping [34632.028047] CPU3 is up [34632.031366] ACPI: Waking up from system sleep state S3 [34632.068197] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [34632.080212] PM: noirq resume of devices complete after 16.083 msecs [34632.096558] PM: early resume of devices complete after 16.332 msecs [34632.096830] ath: phy0: ASPM enabled: 0x42 [34632.097204] sd 4:0:0:0: [sda] Starting disk [34632.120057] rtc_cmos 00:01: System wakeup disabled by ACPI [34632.143610] xhci_hcd 0000:00:14.0: port 4 resume PLC timeout [34632.328002] usb 1-1.2: reset full-speed USB device number 10 using ehci-pci [34632.368153] usb 3-5: reset high-speed USB device number 2 using xhci_hcd [34632.420339] usb 1-1.2: device firmware changed [34632.427989] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [34632.435788] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [34632.435790] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [34632.435791] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [34632.450597] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [34632.450599] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [34632.450600] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [34632.452832] ata6.00: configured for UDMA/100 [34632.616117] usb 3-10: reset high-speed USB device number 3 using xhci_hcd [34632.721057] psmouse serio1: synaptics: queried max coordinates: x [..5692], y [..4680] [34632.771904] PM: resume of devices complete after 675.381 msecs [34632.772090] PM: Finishing wakeup. [34632.772091] Restarting tasks ... [34632.774147] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [34632.774500] pci_bus 0000:01: Allocating resources [34632.774515] pci_bus 0000:02: Allocating resources [34632.774534] pci_bus 0000:03: Allocating resources [34632.774547] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [34632.774918] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [34632.774938] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [34632.775036] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [34632.775123] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [34632.775190] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [34632.775243] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [34632.775827] usb 1-1.2: USB disconnect, device number 10 [34632.778898] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [34632.779143] pci_bus 0000:01: Allocating resources [34632.779155] pci_bus 0000:02: Allocating resources [34632.779172] pci_bus 0000:03: Allocating resources [34632.779181] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [34632.779446] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [34632.779462] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [34632.779556] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [34632.779641] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [34632.779702] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [34632.779751] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [34632.779800] done. [34632.847930] usb 1-1.2: new full-speed USB device number 11 using ehci-pci [34632.941285] usb 1-1.2: New USB device found, idVendor=0930, idProduct=0220 [34632.941288] usb 1-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [34634.391867] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [34634.393005] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [34634.393008] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [34634.393011] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [34634.395112] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [34634.395114] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [34634.395116] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [34634.396037] ata5.00: configured for UDMA/133 [34639.009839] usb 1-1.2: USB disconnect, device number 11 [34639.207585] usb 1-1.2: new full-speed USB device number 12 using ehci-pci [34642.470721] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [34642.485779] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [34642.695103] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [34642.695463] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [34644.279297] usb 1-1.2: device descriptor read/64, error -110 [34649.476260] usb 1-1.2: New USB device found, idVendor=0930, idProduct=0220 [34649.476265] usb 1-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [34649.674167] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [34651.431715] wlan0: authenticate with 9c:37:f4:48:8c:44 [34651.446345] wlan0: send auth to 9c:37:f4:48:8c:44 (try 1/3) [34651.448282] wlan0: authenticated [34651.450926] wlan0: associate with 9c:37:f4:48:8c:44 (try 1/3) [34651.454888] wlan0: RX AssocResp from 9c:37:f4:48:8c:44 (capab=0x1411 status=0 aid=2) [34651.454965] wlan0: associated [34651.455010] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [34651.546414] wlan0: Limiting TX power to 30 (30 - 0) dBm as advertised by 9c:37:f4:48:8c:44 [34654.609444] cfg80211: World regulatory domain updated: [34654.609446] cfg80211: DFS Master region: unset [34654.609447] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [34654.609449] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [34654.609450] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [34654.609451] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [34654.609453] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [34654.609454] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [34654.609455] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [34654.609456] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [34654.609457] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [40297.860678] toshiba_acpi: Unknown event received 8e [40297.982387] wlan0: deauthenticating from 9c:37:f4:48:8c:44 by local choice (Reason: 3=DEAUTH_LEAVING) [40298.177168] cfg80211: World regulatory domain updated: [40298.177171] cfg80211: DFS Master region: unset [40298.177172] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [40298.177175] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [40298.177176] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [40298.177177] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [40298.177179] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [40298.177180] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [40298.177181] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [40298.177182] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [40298.177184] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [40298.216689] snd_hda_codec_hdmi hdaudioC0D0: HDMI: ELD buf size is 0, force 128 [40298.216713] snd_hda_codec_hdmi hdaudioC0D0: HDMI: invalid ELD data byte 0 [40299.532273] PM: Syncing filesystems ... done. [40301.163329] PM: Preparing system for sleep (mem) [40301.163490] Freezing user space processes ... (elapsed 0.104 seconds) done. [40301.267918] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [40301.269250] PM: Suspending system (mem) [40301.269269] Suspending console(s) (use no_console_suspend to debug) [40301.269589] sd 4:0:0:0: [sda] Synchronizing SCSI cache [40301.389777] sd 4:0:0:0: [sda] Stopping disk [40301.983528] PM: suspend of devices complete after 714.176 msecs [40301.999535] PM: late suspend of devices complete after 16.001 msecs [40302.000662] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [40302.015501] PM: noirq suspend of devices complete after 15.964 msecs [40302.015738] ACPI: Preparing to enter system sleep state S3 [40302.023630] ACPI : EC: EC stopped [40302.023631] PM: Saving platform NVS memory [40302.023651] Disabling non-boot CPUs ... [40302.024888] smpboot: CPU 1 is now offline [40302.035980] Broke affinity for irq 24 [40302.035982] Broke affinity for irq 26 [40302.036996] smpboot: CPU 2 is now offline [40302.047845] Broke affinity for irq 1 [40302.047853] Broke affinity for irq 9 [40302.047856] Broke affinity for irq 12 [40302.047860] Broke affinity for irq 18 [40302.047864] Broke affinity for irq 21 [40302.047867] Broke affinity for irq 23 [40302.047869] Broke affinity for irq 24 [40302.047870] Broke affinity for irq 25 [40302.047871] Broke affinity for irq 26 [40302.048877] smpboot: CPU 3 is now offline [40302.064996] ACPI: Low-level resume complete [40302.065042] ACPI : EC: EC started [40302.065042] PM: Restoring platform NVS memory [40302.067491] microcode: CPU0 microcode updated early to revision 0x1e, date = 2015-08-13 [40302.067511] Enabling non-boot CPUs ... [40302.085113] x86: Booting SMP configuration: [40302.085114] smpboot: Booting Node 0 Processor 1 APIC 0x2 [40302.086569] microcode: CPU1 microcode updated early to revision 0x1e, date = 2015-08-13 [40302.089846] cache: parent cpu1 should not be sleeping [40302.089990] CPU1 is up [40302.109165] smpboot: Booting Node 0 Processor 2 APIC 0x1 [40302.112671] cache: parent cpu2 should not be sleeping [40302.112818] CPU2 is up [40302.129101] smpboot: Booting Node 0 Processor 3 APIC 0x3 [40302.132609] cache: parent cpu3 should not be sleeping [40302.132710] CPU3 is up [40302.136051] ACPI: Waking up from system sleep state S3 [40302.173039] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [40302.185160] PM: noirq resume of devices complete after 16.071 msecs [40302.203506] PM: early resume of devices complete after 18.335 msecs [40302.203759] ath: phy0: ASPM enabled: 0x42 [40302.205110] sd 4:0:0:0: [sda] Starting disk [40302.225011] rtc_cmos 00:01: System wakeup disabled by ACPI [40302.247780] xhci_hcd 0000:00:14.0: port 4 resume PLC timeout [40302.432950] usb 1-1.2: reset full-speed USB device number 12 using ehci-pci [40302.473113] usb 3-5: reset high-speed USB device number 2 using xhci_hcd [40302.525195] usb 1-1.2: device firmware changed [40302.532932] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [40302.541481] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [40302.541483] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [40302.541484] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [40302.556349] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [40302.556351] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [40302.556352] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [40302.558588] ata6.00: configured for UDMA/100 [40302.713083] usb 3-10: reset high-speed USB device number 3 using xhci_hcd [40302.831687] psmouse serio1: synaptics: queried max coordinates: x [..5692], y [..4680] [40302.864818] PM: resume of devices complete after 661.354 msecs [40302.865007] PM: Finishing wakeup. [40302.865008] Restarting tasks ... [40302.869594] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [40302.869993] pci_bus 0000:01: Allocating resources [40302.870013] pci_bus 0000:02: Allocating resources [40302.870033] pci_bus 0000:03: Allocating resources [40302.870046] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [40302.870443] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [40302.870460] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [40302.870565] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [40302.870657] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [40302.870735] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [40302.870796] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [40302.871560] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [40302.871943] pci_bus 0000:01: Allocating resources [40302.871958] pci_bus 0000:02: Allocating resources [40302.871978] pci_bus 0000:03: Allocating resources [40302.871991] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [40302.872384] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [40302.872404] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [40302.872508] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [40302.872601] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [40302.872672] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [40302.872732] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [40302.874132] done. [40302.877279] usb 1-1.2: USB disconnect, device number 12 [40302.948886] usb 1-1.2: new full-speed USB device number 13 using ehci-pci [40303.042170] usb 1-1.2: New USB device found, idVendor=0930, idProduct=0220 [40303.042173] usb 1-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [40304.484825] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [40304.486038] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [40304.486041] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [40304.486044] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [40304.488188] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [40304.488191] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [40304.488193] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [40304.489186] ata5.00: configured for UDMA/133 [40305.532932] usb 1-1.2: USB disconnect, device number 13 [40305.732716] usb 1-1.2: new full-speed USB device number 14 using ehci-pci [40306.638299] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [40306.653473] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [40306.654306] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [40306.654670] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [40306.766367] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [40307.688754] wlan0: authenticate with 9c:37:f4:48:8c:44 [40307.700531] wlan0: send auth to 9c:37:f4:48:8c:44 (try 1/3) [40307.702482] wlan0: authenticated [40307.704557] wlan0: associate with 9c:37:f4:48:8c:44 (try 1/3) [40307.708151] wlan0: RX AssocResp from 9c:37:f4:48:8c:44 (capab=0x1411 status=0 aid=2) [40307.708228] wlan0: associated [40307.708275] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [40307.739821] wlan0: Limiting TX power to 30 (30 - 0) dBm as advertised by 9c:37:f4:48:8c:44 [40310.804352] usb 1-1.2: device descriptor read/64, error -110 [40310.859011] cfg80211: World regulatory domain updated: [40310.859014] cfg80211: DFS Master region: unset [40310.859016] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [40310.859017] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [40310.859019] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [40310.859020] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [40310.859022] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [40310.859023] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [40310.859024] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [40310.859025] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [40310.859026] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [40316.001334] usb 1-1.2: New USB device found, idVendor=0930, idProduct=0220 [40316.001337] usb 1-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [40364.515501] wlan0: deauthenticating from 9c:37:f4:48:8c:44 by local choice (Reason: 3=DEAUTH_LEAVING) [40365.281794] cfg80211: World regulatory domain updated: [40365.281797] cfg80211: DFS Master region: unset [40365.281798] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [40365.281800] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [40365.281802] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [40365.281803] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [40365.281804] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [40365.281805] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [40365.281807] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [40365.281808] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [40365.281809] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [40370.844173] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [40370.889958] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [40371.839901] wlan0: authenticate with 9c:37:f4:48:8c:44 [40371.851964] wlan0: send auth to 9c:37:f4:48:8c:44 (try 1/3) [40371.853903] wlan0: authenticated [40371.856292] wlan0: associate with 9c:37:f4:48:8c:44 (try 1/3) [40371.859893] wlan0: RX AssocResp from 9c:37:f4:48:8c:44 (capab=0x1411 status=0 aid=2) [40371.859981] wlan0: associated [40371.860027] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [40371.862018] wlan0: Limiting TX power to 30 (30 - 0) dBm as advertised by 9c:37:f4:48:8c:44 [40375.006989] cfg80211: World regulatory domain updated: [40375.006992] cfg80211: DFS Master region: unset [40375.006993] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [40375.006994] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [40375.006996] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [40375.006996] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [40375.006998] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [40375.006999] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [40375.007000] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [40375.007001] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [40375.007002] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [48317.133077] toshiba_acpi: Unknown event received 8e [48321.062390] snd_hda_codec_hdmi hdaudioC0D0: HDMI: ELD buf size is 0, force 128 [48321.062430] snd_hda_codec_hdmi hdaudioC0D0: HDMI: invalid ELD data byte 0 [48322.050808] wlan0: deauthenticating from 9c:37:f4:48:8c:44 by local choice (Reason: 3=DEAUTH_LEAVING) [48330.758602] snd_hda_codec_hdmi hdaudioC0D0: HDMI: ELD buf size is 0, force 128 [48330.758640] snd_hda_codec_hdmi hdaudioC0D0: HDMI: invalid ELD data byte 0 [48331.547820] cfg80211: World regulatory domain updated: [48331.547824] cfg80211: DFS Master region: unset [48331.547826] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [48331.547829] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [48331.547831] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [48331.547832] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [48331.547835] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [48331.547837] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [48331.547839] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [48331.547840] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [48331.547842] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [48331.835273] PM: Syncing filesystems ... done. [48337.026227] PM: Preparing system for sleep (mem) [48337.026363] Freezing user space processes ... (elapsed 0.354 seconds) done. [48337.381098] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [48337.382417] PM: Suspending system (mem) [48337.382435] Suspending console(s) (use no_console_suspend to debug) [48337.382755] sd 4:0:0:0: [sda] Synchronizing SCSI cache [48337.489533] sd 4:0:0:0: [sda] Stopping disk [48338.101184] PM: suspend of devices complete after 718.632 msecs [48338.117038] PM: late suspend of devices complete after 15.847 msecs [48338.118670] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [48338.133198] PM: noirq suspend of devices complete after 16.155 msecs [48338.133794] ACPI: Preparing to enter system sleep state S3 [48338.141418] ACPI : EC: EC stopped [48338.141419] PM: Saving platform NVS memory [48338.141460] Disabling non-boot CPUs ... [48338.142970] smpboot: CPU 1 is now offline [48338.153882] Broke affinity for irq 18 [48338.153887] Broke affinity for irq 21 [48338.153894] Broke affinity for irq 24 [48338.153896] Broke affinity for irq 25 [48338.154922] smpboot: CPU 2 is now offline [48338.165688] Broke affinity for irq 1 [48338.165696] Broke affinity for irq 9 [48338.165700] Broke affinity for irq 12 [48338.165704] Broke affinity for irq 18 [48338.165708] Broke affinity for irq 21 [48338.165712] Broke affinity for irq 23 [48338.165714] Broke affinity for irq 24 [48338.165716] Broke affinity for irq 25 [48338.165717] Broke affinity for irq 26 [48338.166731] smpboot: CPU 3 is now offline [48338.178827] ACPI: Low-level resume complete [48338.178872] ACPI : EC: EC started [48338.178873] PM: Restoring platform NVS memory [48338.181313] microcode: CPU0 microcode updated early to revision 0x1e, date = 2015-08-13 [48338.181336] Enabling non-boot CPUs ... [48338.198849] x86: Booting SMP configuration: [48338.198850] smpboot: Booting Node 0 Processor 1 APIC 0x2 [48338.200306] microcode: CPU1 microcode updated early to revision 0x1e, date = 2015-08-13 [48338.203582] cache: parent cpu1 should not be sleeping [48338.203726] CPU1 is up [48338.222897] smpboot: Booting Node 0 Processor 2 APIC 0x1 [48338.226403] cache: parent cpu2 should not be sleeping [48338.226549] CPU2 is up [48338.242847] smpboot: Booting Node 0 Processor 3 APIC 0x3 [48338.246354] cache: parent cpu3 should not be sleeping [48338.246458] CPU3 is up [48338.249806] ACPI: Waking up from system sleep state S3 [48338.286880] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [48338.298883] PM: noirq resume of devices complete after 16.053 msecs [48338.317263] PM: early resume of devices complete after 18.369 msecs [48338.318794] ath: phy0: ASPM enabled: 0x42 [48338.319114] sd 4:0:0:0: [sda] Starting disk [48338.342759] rtc_cmos 00:01: System wakeup disabled by ACPI [48338.365787] xhci_hcd 0000:00:14.0: port 4 resume PLC timeout [48338.550686] usb 1-1.2: reset full-speed USB device number 14 using ehci-pci [48338.594839] usb 3-10: reset high-speed USB device number 3 using xhci_hcd [48338.642997] usb 1-1.2: device firmware changed [48338.646685] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [48338.655247] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [48338.655249] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [48338.655250] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [48338.670167] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [48338.670168] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [48338.670170] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [48338.672403] ata6.00: configured for UDMA/100 [48338.834848] usb 3-5: reset high-speed USB device number 2 using xhci_hcd [48338.946409] psmouse serio1: synaptics: queried max coordinates: x [..5692], y [..4680] [48338.978721] PM: resume of devices complete after 661.475 msecs [48338.978957] PM: Finishing wakeup. [48338.978959] Restarting tasks ... [48338.980165] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [48338.980504] pci_bus 0000:01: Allocating resources [48338.980519] pci_bus 0000:02: Allocating resources [48338.980536] pci_bus 0000:03: Allocating resources [48338.980548] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [48338.980893] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [48338.980909] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [48338.981004] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [48338.981086] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [48338.981150] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [48338.981194] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [48338.982830] usb 1-1.2: USB disconnect, device number 14 [48338.983543] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [48338.983915] pci_bus 0000:01: Allocating resources [48338.983931] pci_bus 0000:02: Allocating resources [48338.983947] pci_bus 0000:03: Allocating resources [48338.983959] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [48338.984372] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [48338.984393] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [48338.984500] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [48338.984598] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [48338.984675] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [48338.984737] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [48338.995511] done. [48339.054653] usb 1-1.2: new full-speed USB device number 15 using ehci-pci [48339.147961] usb 1-1.2: New USB device found, idVendor=0930, idProduct=0220 [48339.147964] usb 1-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [48340.658630] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [48340.660064] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [48340.660072] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [48340.660076] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [48340.662470] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [48340.662476] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [48340.662480] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [48340.663399] ata5.00: configured for UDMA/133 [48344.975800] usb 1-1.2: USB disconnect, device number 15 [48345.174469] usb 1-1.2: new full-speed USB device number 16 using ehci-pci [48348.735095] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [48348.750149] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [48348.854494] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [48348.854867] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [48349.638486] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [48350.246312] usb 1-1.2: device descriptor read/64, error -110 [48350.518444] wlan0: authenticate with 9c:37:f4:48:8c:44 [48350.530218] wlan0: send auth to 9c:37:f4:48:8c:44 (try 1/3) [48350.532140] wlan0: authenticated [48350.534294] wlan0: associate with 9c:37:f4:48:8c:44 (try 1/3) [48350.537890] wlan0: RX AssocResp from 9c:37:f4:48:8c:44 (capab=0x1411 status=0 aid=2) [48350.537967] wlan0: associated [48350.538010] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [48350.600807] wlan0: Limiting TX power to 30 (30 - 0) dBm as advertised by 9c:37:f4:48:8c:44 [48353.685027] cfg80211: World regulatory domain updated: [48353.685030] cfg80211: DFS Master region: unset [48353.685031] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [48353.685032] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [48353.685033] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [48353.685034] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [48353.685036] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [48353.685037] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [48353.685038] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [48353.685039] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [48353.685040] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [48355.443371] usb 1-1.2: New USB device found, idVendor=0930, idProduct=0220 [48355.443375] usb 1-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [48391.496528] snd_hda_codec_hdmi hdaudioC0D0: HDMI: ELD buf size is 0, force 128 [48391.496568] snd_hda_codec_hdmi hdaudioC0D0: HDMI: invalid ELD data byte 0 [48446.682302] snd_hda_codec_hdmi hdaudioC0D0: HDMI: ELD buf size is 0, force 128 [48446.682342] snd_hda_codec_hdmi hdaudioC0D0: HDMI: invalid ELD data byte 0 [49115.194174] systemd[1]: snapd.refresh.timer: Adding 5h 15min 54.185687s random time. [49115.194417] systemd[1]: snapd.refresh.timer: Adding 1h 10min 23.294565s random time. [49119.678356] systemd[1]: snapd.refresh.timer: Adding 40min 3.637578s random time. [49119.678885] systemd[1]: snapd.refresh.timer: Adding 4h 42min 36.171967s random time. [49135.431274] systemd[1]: snapd.refresh.timer: Adding 4h 7min 10.546379s random time. [49135.431339] systemd[1]: apt-daily.timer: Adding 8h 8min 17.994160s random time. [49135.431534] systemd[1]: snapd.refresh.timer: Adding 3h 9min 56.795768s random time. [49151.629145] systemd[1]: snapd.refresh.timer: Adding 3h 14min 28.770705s random time. [49151.629207] systemd[1]: apt-daily.timer: Adding 1h 46min 33.240937s random time. [49151.629375] systemd[1]: snapd.refresh.timer: Adding 1h 40min 56.851334s random time. [49151.766727] systemd[1]: snapd.refresh.timer: Adding 5h 36min 26.910649s random time. [49151.766960] systemd[1]: snapd.refresh.timer: Adding 5h 53min 24.019514s random time. [49151.867680] systemd[1]: snapd.refresh.timer: Adding 2h 54min 6.864083s random time. [49151.867737] systemd[1]: apt-daily.timer: Adding 4h 27min 13.765824s random time. [49151.867793] systemd[1]: Started ACPI event daemon. [49151.867933] systemd[1]: snapd.refresh.timer: Adding 5h 57min 938.210ms random time. [49151.868429] systemd[1]: Started CUPS Scheduler.