[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.35-22-omap (buildd@gourd) (gcc version 4.4.5 (Ubuntu/Linaro 4.4.4-14ubuntu4) ) #33-Ubuntu Mon Sep 20 03:17:30 UTC 2010 (Ubuntu 2.6.35-22.33-omap 2.6.35.4) [ 0.000000] CPU: ARMv7 Processor [411fc083] revision 3 (ARMv7), cr=10c53c7f [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache [ 0.000000] Machine: OMAP3 Beagle Board [ 0.000000] Memory policy: ECC disabled, Data cache writeback [ 0.000000] On node 0 totalpages: 65536 [ 0.000000] free_area_init_node: node 0, pgdat c0763660, node_mem_map c0820000 [ 0.000000] Normal zone: 512 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 65024 pages, LIFO batch:15 [ 0.000000] OMAP3430/3530 ES3.1 (l2cache iva sgx neon isp ) [ 0.000000] SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x100000 [ 0.000000] Reserving 12582912 bytes SDRAM for VRAM [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024 [ 0.000000] Kernel command line: quiet splash ro elevator=noop vram=12M omapfb.mode=dvi:1280x720MR-16@60 root=UUID=ce0e8a39-e298-4958-8307-8e8cebd37525 fixrtc [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] allocated 1310720 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Memory: 128MB 128MB = 256MB total [ 0.000000] Memory: 231404k/231404k available, 30740k reserved, 0K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB) [ 0.000000] vmalloc : 0xd0800000 - 0xf8000000 ( 632 MB) [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB) [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) [ 0.000000] .init : 0xc0008000 - 0xc0044000 ( 240 kB) [ 0.000000] .text : 0xc0044000 - 0xc06ac000 (6560 kB) [ 0.000000] .data : 0xc0718000 - 0xc0767960 ( 319 kB) [ 0.000000] SLUB: Genslabs=9, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] Verbose stalled-CPUs detection is disabled. [ 0.000000] NR_IRQS:402 [ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/332/500 MHz [ 0.000000] omap_hwmod: l3_hwmod: cannot be enabled (3) [ 0.000000] omap_hwmod: l4_core_hwmod: cannot be enabled (3) [ 0.000000] omap_hwmod: l4_per_hwmod: cannot be enabled (3) [ 0.000000] omap_hwmod: l4_wkup_hwmod: cannot be enabled (3) [ 0.000000] Reprogramming SDRC clock to 332000000 Hz [ 0.000000] GPMC revision 5.0 [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts [ 0.000000] Total of 96 interrupts on 1 active controller [ 0.000000] OMAP GPIO hardware version 2.5 [ 0.000000] OMAP clockevent source: GPTIMER12 at 32768 Hz [ 0.000000] Console: colour dummy device 80x30 [ 0.000000] console [tty0] enabled [ 0.000000] Calibrating delay loop... 496.77 BogoMIPS (lpj=1937408) [ 0.000000] pid_max: default: 32768 minimum: 301 [ 0.000000] Security Framework initialized [ 0.000000] AppArmor: AppArmor initialized [ 0.000000] Yama: becoming mindful. [ 0.000000] Mount-cache hash table entries: 512 [ 0.000000] Initializing cgroup subsys ns [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Initializing cgroup subsys memory [ 0.000000] Initializing cgroup subsys devices [ 0.000000] Initializing cgroup subsys freezer [ 0.000000] CPU: Testing write buffer coherency: ok [ 0.000000] devtmpfs: initialized [ 0.000000] regulator: core version 0.5 [ 0.000000] NET: Registered protocol family 16 [ 0.000000] mux: Setting signal mcspi1_clk.gpio171 0x011c -> 0x011c [ 0.000000] mux: Setting signal mcspi1_simo.gpio172 0x011c -> 0x011c [ 0.000000] mux: Setting signal mcspi1_somi.gpio173 0x011c -> 0x011c [ 0.000000] OMAP3 Beagle Rev: C4 [ 0.000000] mux: Setting signal i2c3_scl.i2c3_scl 0x0118 -> 0x0100 [ 0.000000] mux: Setting signal i2c3_sda.i2c3_sda 0x0118 -> 0x0100 [ 0.000000] mux: Setting signal etk_clk.hsusb1_stp 0x001b -> 0x0003 [ 0.000000] mux: Setting signal etk_ctl.hsusb1_clk 0x0013 -> 0x0003 [ 0.000000] mux: Setting signal etk_d8.hsusb1_dir 0x0113 -> 0x010b [ 0.000000] mux: Setting signal etk_d9.hsusb1_nxt 0x0113 -> 0x010b [ 0.000000] mux: Setting signal etk_d0.hsusb1_data0 0x0113 -> 0x010b [ 0.000000] mux: Setting signal etk_d1.hsusb1_data1 0x0113 -> 0x010b [ 0.000000] mux: Setting signal etk_d2.hsusb1_data2 0x0113 -> 0x010b [ 0.000000] mux: Setting signal etk_d7.hsusb1_data3 0x0113 -> 0x010b [ 0.000000] mux: Setting signal etk_d4.hsusb1_data4 0x0113 -> 0x010b [ 0.000000] mux: Setting signal etk_d5.hsusb1_data5 0x0113 -> 0x010b [ 0.000000] mux: Setting signal etk_d6.hsusb1_data6 0x0113 -> 0x010b [ 0.000000] mux: Setting signal etk_d3.hsusb1_data7 0x0113 -> 0x010b [ 0.000000] mux: Setting signal etk_d11.hsusb2_stp 0x0013 -> 0x0003 [ 0.000000] mux: Setting signal etk_d10.hsusb2_clk 0x0013 -> 0x0003 [ 0.000000] mux: Setting signal etk_d12.hsusb2_dir 0x0113 -> 0x010b [ 0.000000] mux: Setting signal etk_d13.hsusb2_nxt 0x0113 -> 0x010b [ 0.000000] mux: Setting signal etk_d14.hsusb2_data0 0x0113 -> 0x010b [ 0.000000] mux: Setting signal etk_d15.hsusb2_data1 0x0113 -> 0x010b [ 0.000000] mux: Setting signal mcspi1_cs3.hsusb2_data2 0x0113 -> 0x010b [ 0.000000] mux: Setting signal mcspi2_cs1.hsusb2_data3 0x0113 -> 0x010b [ 0.000000] mux: Setting signal mcspi2_simo.hsusb2_data4 0x0113 -> 0x010b [ 0.000000] mux: Setting signal mcspi2_somi.hsusb2_data5 0x0113 -> 0x010b [ 0.000000] mux: Setting signal mcspi2_cs0.hsusb2_data6 0x0113 -> 0x010b [ 0.000000] mux: Setting signal mcspi2_clk.hsusb2_data7 0x0113 -> 0x010b [ 0.000000] Found NAND on CS0 [ 0.000000] Registering NAND on CS0 [ 0.000000] mux: Setting signal sdrc_cke0.sdrc_cke0 0x0118 -> 0x0000 [ 0.000000] mux: Setting signal sdrc_cke1.sdrc_cke1 0x0118 -> 0x0000 [ 0.000000] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available [ 0.000122] OMAP DMA hardware revision 4.0 [ 0.006408] bio: create slab at 0 [ 0.008483] SCSI subsystem initialized [ 0.008789] libata version 3.00 loaded. [ 0.009307] usbcore: registered new interface driver usbfs [ 0.009429] usbcore: registered new interface driver hub [ 0.009643] usbcore: registered new device driver usb [ 0.019622] i2c_omap i2c_omap.1: bus 1 rev3.12 at 2600 kHz [ 0.022369] twl4030: PIH (irq 7) chaining IRQs 368..375 [ 0.022399] twl4030: power (irq 373) chaining IRQs 376..383 [ 0.022888] twl4030: gpio (irq 368) chaining IRQs 384..401 [ 0.023254] mux: Setting signal etk_d9.gpio23 0x010b -> 0x0104 [ 0.023345] mux: Setting signal etk_d9.gpio23 0x0104 -> 0x011c [ 0.023529] mux: Setting signal sdmmc1_clk.sdmmc1_clk 0x0018 -> 0x0118 [ 0.023681] mux: Setting signal sdmmc1_cmd.sdmmc1_cmd 0x0118 -> 0x0118 [ 0.023803] mux: Setting signal sdmmc1_dat0.sdmmc1_dat0 0x0118 -> 0x0118 [ 0.023925] mux: Setting signal sdmmc1_dat1.sdmmc1_dat1 0x0118 -> 0x0118 [ 0.024047] mux: Setting signal sdmmc1_dat2.sdmmc1_dat2 0x0118 -> 0x0118 [ 0.024169] mux: Setting signal sdmmc1_dat3.sdmmc1_dat3 0x0118 -> 0x0118 [ 0.024291] mux: Setting signal sdmmc1_dat4.sdmmc1_dat4 0x0118 -> 0x0118 [ 0.024414] mux: Setting signal sdmmc1_dat5.sdmmc1_dat5 0x0118 -> 0x0118 [ 0.024536] mux: Setting signal sdmmc1_dat6.sdmmc1_dat6 0x0118 -> 0x0118 [ 0.024658] mux: Setting signal sdmmc1_dat7.sdmmc1_dat7 0x0118 -> 0x0118 [ 0.025878] regulator: VUSB1V5: 1500 mV normal standby [ 0.026275] regulator: VUSB1V8: 1800 mV normal standby [ 0.026641] regulator: VUSB3V1: 3100 mV normal standby [ 0.028442] twl4030_usb twl4030_usb: Initialized TWL4030 USB module [ 0.029235] regulator: VMMC1: 1850 <--> 3150 mV at 3000 mV normal standby [ 0.029632] regulator: VDAC: 1800 mV normal standby [ 0.030029] regulator: VPLL2: 1800 mV normal standby [ 0.030517] regulator: VSIM: 1800 <--> 3000 mV at 1800 mV normal standby [ 0.042938] i2c_omap i2c_omap.3: bus 3 rev3.12 at 100 kHz [ 0.044006] Advanced Linux Sound Architecture Driver Version 1.0.23. [ 0.044616] NetLabel: Initializing [ 0.044616] NetLabel: domain hash size = 128 [ 0.044647] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.044738] NetLabel: unlabeled traffic allowed by default [ 0.044799] Switching to clocksource 32k_counter [ 0.055236] AppArmor: AppArmor Filesystem Enabled [ 0.068481] musb_hdrc: version 6.0, musb-dma, otg (peripheral+host), debug=0 [ 0.074005] musb_hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn) [ 0.074035] musb_hdrc: MHDRC RTL version 1.400 [ 0.074035] musb_hdrc: setup fifo_mode 4 [ 0.074066] musb_hdrc: 28/31 max ep, 16384/16384 memory [ 0.074340] musb_hdrc musb_hdrc: USB OTG mode controller at fa0ab000 using DMA, IRQ 92 [ 0.074615] NET: Registered protocol family 2 [ 0.074890] IP route cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.075836] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [ 0.076080] TCP bind hash table entries: 8192 (order: 3, 32768 bytes) [ 0.076293] TCP: Hash tables configured (established 8192 bind 8192) [ 0.076293] TCP reno registered [ 0.076324] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.076354] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.076629] NET: Registered protocol family 1 [ 0.077636] PMU: registered new PMU device of type 0 [ 0.077728] NetWinder Floating Point Emulator V0.97 (double precision) [ 0.078186] audit: initializing netlink socket (disabled) [ 0.078247] type=2000 audit(0.265:1): initialized [ 0.259735] Trying to unpack rootfs image as initramfs... [ 8.150787] VFS: Disk quotas dquot_6.5.2 [ 8.151184] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 8.155456] fuse init (API version 7.14) [ 8.156219] msgmni has been set to 451 [ 8.158203] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 8.158203] io scheduler noop registered (default) [ 8.158233] io scheduler deadline registered [ 8.158355] io scheduler cfq registered [ 8.217010] OMAP DSS rev 2.0 [ 8.217132] OMAP DISPC rev 3.0 [ 8.217193] OMAP VENC rev 2 [ 8.336334] Freeing initrd memory: 6608K [ 8.545989] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 8.567443] serial8250.0: ttyS0 at MMIO 0x4806a000 (irq = 72) is a ST16654 [ 8.587921] serial8250.1: ttyS1 at MMIO 0x4806c000 (irq = 73) is a ST16654 [ 8.608398] serial8250.2: ttyS2 at MMIO 0x49020000 (irq = 74) is a ST16654 [ 8.617218] brd: module loaded [ 8.621643] loop: module loaded [ 8.623687] omap2-nand driver initializing [ 8.623992] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xba (Micron omap2-nand.0) [ 8.624023] NAND bus width 8 instead 16 bit [ 8.624023] No NAND device found. [ 8.624206] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xba (Micron NAND 256MiB 1,8V 16-bit) [ 8.624237] Creating 5 MTD partitions on "omap2-nand.0": [ 8.624267] 0x000000000000-0x000000080000 : "X-Loader" [ 8.625885] 0x000000080000-0x000000260000 : "U-Boot" [ 8.627899] 0x000000260000-0x000000280000 : "U-Boot Env" [ 8.629180] 0x000000280000-0x000000680000 : "Kernel" [ 8.632141] 0x000000680000-0x000010000000 : "File System" [ 8.738128] Fixed MDIO Bus: probed [ 8.738464] PPP generic driver version 2.4.2 [ 8.738830] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled). [ 8.738861] CSLIP: code copyright 1989 Regents of the University of California. [ 8.738861] SLIP linefill/keepalive option. [ 8.739105] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 8.739410] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller [ 8.739471] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1 [ 8.739685] ehci-omap ehci-omap.0: irq 77, io mem 0x48064800 [ 8.748107] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00 [ 8.749053] hub 1-0:1.0: USB hub found [ 8.749114] hub 1-0:1.0: 3 ports detected [ 8.779357] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 8.780059] mice: PS/2 mouse device common for all mice [ 8.780700] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0 [ 8.781494] twl_rtc twl_rtc: Enabling TWL-RTC. [ 8.782592] device-mapper: uevent: version 1.0.3 [ 8.783416] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com [ 8.783782] device-mapper: multipath: version 1.1.1 loaded [ 8.783813] device-mapper: multipath round-robin: version 1.0.0 loaded [ 8.784729] cpuidle: using governor ladder [ 8.784759] cpuidle: using governor menu [ 8.784851] sdhci: Secure Digital Host Controller Interface driver [ 8.784851] sdhci: Copyright(c) Pierre Ossman [ 8.961181] No device for DAI omap-mcbsp-dai-0 [ 8.961181] No device for DAI omap-mcbsp-dai-1 [ 8.961212] No device for DAI omap-mcbsp-dai-2 [ 8.961212] No device for DAI omap-mcbsp-dai-3 [ 8.961242] No device for DAI omap-mcbsp-dai-4 [ 8.961242] Not OMAP3 EVM! [ 8.961242] OMAP3 Beagle/Devkit8000 SoC init [ 8.963012] asoc: twl4030 <-> omap-mcbsp-dai-0 mapping ok [ 8.967071] ALSA device list: [ 8.967071] #0: omap3beagle (twl4030) [ 8.968414] TCP cubic registered [ 8.969726] NET: Registered protocol family 10 [ 8.971282] lo: Disabled Privacy Extensions [ 8.972259] NET: Registered protocol family 17 [ 8.973999] Power Management for TI OMAP3. [ 8.974975] Disabling unused clock "sr2_fck" [ 8.975006] Disabling unused clock "sr1_fck" [ 8.975036] Disabling unused clock "mcbsp4_fck" [ 8.975036] Disabling unused clock "mcbsp3_fck" [ 8.975067] Disabling unused clock "mcbsp2_fck" [ 8.975097] Disabling unused clock "mcbsp4_ick" [ 8.975097] Disabling unused clock "mcbsp3_ick" [ 8.975128] Disabling unused clock "mcbsp2_ick" [ 8.975128] Disabling unused clock "gpt2_ick" [ 8.975158] Disabling unused clock "gpt3_ick" [ 8.975158] Disabling unused clock "gpt4_ick" [ 8.975189] Disabling unused clock "gpt5_ick" [ 8.975189] Disabling unused clock "gpt6_ick" [ 8.975219] Disabling unused clock "gpt7_ick" [ 8.975219] Disabling unused clock "gpt8_ick" [ 8.975250] Disabling unused clock "gpt9_ick" [ 8.975250] Disabling unused clock "wdt3_ick" [ 8.975280] Disabling unused clock "wdt3_fck" [ 8.975311] Disabling unused clock "gpio2_dbck" [ 8.975311] Disabling unused clock "gpio3_dbck" [ 8.975341] Disabling unused clock "gpio4_dbck" [ 8.975341] Disabling unused clock "gpio5_dbck" [ 8.975372] Disabling unused clock "gpio6_dbck" [ 8.975372] Disabling unused clock "gpt9_fck" [ 8.975402] Disabling unused clock "gpt8_fck" [ 8.975402] Disabling unused clock "gpt7_fck" [ 8.975433] Disabling unused clock "gpt6_fck" [ 8.975433] Disabling unused clock "gpt5_fck" [ 8.975463] Disabling unused clock "gpt4_fck" [ 8.975463] Disabling unused clock "gpt3_fck" [ 8.975494] Disabling unused clock "gpt2_fck" [ 8.975494] Disabling unused clock "gpt1_ick" [ 8.975524] Disabling unused clock "wdt1_ick" [ 8.975555] Disabling unused clock "wdt2_ick" [ 8.975555] Disabling unused clock "wdt2_fck" [ 8.975585] Disabling unused clock "gpio1_dbck" [ 8.975585] Disabling unused clock "gpt1_fck" [ 8.975616] Disabling unused clock "cam_ick" [ 8.975646] Disabling unused clock "cam_mclk" [ 8.975708] Disabling unused clock "des1_ick" [ 8.975708] Disabling unused clock "sha11_ick" [ 8.975738] Disabling unused clock "rng_ick" [ 8.975738] Disabling unused clock "aes1_ick" [ 8.975738] Disabling unused clock "ssi_ick" [ 8.975769] Disabling unused clock "mailboxes_ick" [ 8.975799] Disabling unused clock "mcbsp1_ick" [ 8.975799] Disabling unused clock "mcbsp5_ick" [ 8.975830] Disabling unused clock "gpt10_ick" [ 8.975830] Disabling unused clock "gpt11_ick" [ 8.975860] Disabling unused clock "i2c2_ick" [ 8.975860] Disabling unused clock "mcspi1_ick" [ 8.975891] Disabling unused clock "mcspi2_ick" [ 8.975891] Disabling unused clock "mcspi3_ick" [ 8.975921] Disabling unused clock "mcspi4_ick" [ 8.975921] Disabling unused clock "hdq_ick" [ 8.975952] Disabling unused clock "mspro_ick" [ 8.975982] Disabling unused clock "des2_ick" [ 8.975982] Disabling unused clock "sha12_ick" [ 8.976013] Disabling unused clock "aes2_ick" [ 8.976013] Disabling unused clock "icr_ick" [ 8.976043] Disabling unused clock "pka_ick" [ 8.976043] Disabling unused clock "ssi_ssr_fck" [ 8.976074] Disabling unused clock "hdq_fck" [ 8.976074] Disabling unused clock "mcspi1_fck" [ 8.976104] Disabling unused clock "mcspi2_fck" [ 8.976104] Disabling unused clock "mcspi3_fck" [ 8.976135] Disabling unused clock "mcspi4_fck" [ 8.976135] Disabling unused clock "mcbsp1_fck" [ 8.976165] Disabling unused clock "mcbsp5_fck" [ 8.976165] Disabling unused clock "i2c2_fck" [ 8.976196] Disabling unused clock "mspro_fck" [ 8.976196] Disabling unused clock "gpt11_fck" [ 8.976226] Disabling unused clock "gpt10_fck" [ 8.976257] Disabling unused clock "sad2d_ick" [ 8.976287] Disabling unused clock "dpll4_m6x2_ck" [ 8.976287] Disabling unused clock "dpll3_m3x2_ck" [ 8.976318] Disabling unused clock "sys_clkout1" [ 8.976348] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1 [ 8.977264] registered taskstats version 1 [ 8.977447] fbcvt: 1280x720@60: CVT Name - .921M9-R [ 9.002471] Console: switching to colour frame buffer device 160x45 [ 9.018768] regulator_init_complete: incomplete constraints, leaving VDAC on [ 9.019775] twl_rtc twl_rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 9.020080] Freeing init memory: 240K [ 9.076293] usb 1-2: new high speed USB device using ehci-omap and address 2 [ 9.120178] mmc0: new high speed SDHC card at address 0001 [ 9.123199] mmcblk0: mmc0:0001 00000 3.79 GiB [ 9.123687] mmcblk0: p1 p2 [ 9.198486] udev[68]: starting version 163 [ 9.239959] hub 1-2:1.0: USB hub found [ 9.240386] hub 1-2:1.0: 4 ports detected [ 9.529937] usb 1-2.1: new full speed USB device using ehci-omap and address 3 [ 9.748657] usb 1-2.2: new high speed USB device using ehci-omap and address 4 [ 9.951782] usb 1-2.4: new low speed USB device using ehci-omap and address 5 [ 10.499908] Initializing USB Mass Storage driver... [ 10.506286] scsi0 : usb-storage 1-2.2:1.0 [ 10.509185] usbcore: registered new interface driver usb-storage [ 10.509216] USB Mass Storage support registered. [ 10.610687] usbcore: registered new interface driver hiddev [ 10.621490] input: USB KB as /devices/platform/ehci-omap.0/usb1/1-2/1-2.4/1-2.4:1.0/input/input0 [ 10.622985] generic-usb 0003:05D5:6781.0001: input,hidraw0: USB HID v1.10 Keyboard [USB KB] on usb-ehci-omap.0-2.4/input0 [ 10.646697] input: USB KB as /devices/platform/ehci-omap.0/usb1/1-2/1-2.4/1-2.4:1.1/input/input1 [ 10.648742] generic-usb 0003:05D5:6781.0002: input,hidraw1: USB HID v1.10 Mouse [USB KB] on usb-ehci-omap.0-2.4/input1 [ 10.650085] usbcore: registered new interface driver usbhid [ 10.650115] usbhid: USB HID core driver [ 11.514770] scsi 0:0:0:0: Direct-Access Lexar USB Flash Drive 1100 PQ: 0 ANSI: 0 CCS [ 11.521850] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 11.537963] sd 0:0:0:0: [sda] 15663104 512-byte logical blocks: (8.01 GB/7.46 GiB) [ 11.538635] sd 0:0:0:0: [sda] Write Protect is off [ 11.538665] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00 [ 11.538665] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 11.542388] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 11.542449] sda: sda1 [ 11.548400] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 11.548431] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 12.210510] Btrfs loaded [ 12.443817] end_request: I/O error, dev mtdblock0, sector 128 [ 12.443847] Buffer I/O error on device mtdblock0, logical block 16 [ 12.444183] end_request: I/O error, dev mtdblock0, sector 128 [ 12.444213] Buffer I/O error on device mtdblock0, logical block 16 [ 12.580230] EXT3-fs: barriers not enabled [ 12.581329] kjournald starting. Commit interval 5 seconds [ 12.581420] EXT3-fs (mmcblk0p2): mounted filesystem with ordered data mode [ 13.947570] EXT3-fs (mmcblk0p2): using internal journal [ 14.764801] udev[342]: starting version 163 [ 15.853820] input: gpio-keys as /devices/platform/gpio-keys/input/input2 [ 15.873901] input: twl4030_pwrbutton as /devices/platform/i2c_omap.1/i2c-1/1-0049/twl4030_pwrbutton/input/input3 [ 15.974304] Registered led device: beagleboard::usr0 [ 15.974456] Registered led device: beagleboard::usr1 [ 16.241271] Registered led device: beagleboard::pmu_stat [ 16.805572] OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec [ 17.601715] pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver [ 17.731292] pegasus 1-2.1:1.0: setup Pegasus II specific registers [ 19.507507] pegasus 1-2.1:1.0: eth0, ADMtek ADM8511 "Pegasus II" USB Ethernet, 00:14:d1:38:4c:2f [ 19.523040] usbcore: registered new interface driver pegasus [ 21.003021] Adding 524284k swap on /SWAP.swap. Priority:-1 extents:139 across:1323228k SS [ 22.751434] lp: driver loaded but no devices found [ 23.055541] ppdev: user-space parallel port driver [ 27.743103] type=1400 audit(1285753143.224:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient3" pid=572 comm="apparmor_parser" [ 28.163970] type=1400 audit(1285753143.646:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=572 comm="apparmor_parser" [ 28.164916] type=1400 audit(1285753143.646:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=572 comm="apparmor_parser" [ 29.474273] type=1400 audit(1285753144.950:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=718 comm="apparmor_parser" [ 29.499694] type=1400 audit(1285753144.982:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=718 comm="apparmor_parser" [ 29.500640] type=1400 audit(1285753144.982:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=718 comm="apparmor_parser" [ 29.575164] pegasus 1-2.1:1.0: eth0: update_eth_regs_async, status -22 [ 39.607421] eth0: no IPv6 routers present [ 122.628967] type=1400 audit(1285775393.898:8): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=791 comm="apparmor_parser" [ 122.649230] type=1400 audit(1285775393.921:9): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=791 comm="apparmor_parser" [ 122.672119] type=1400 audit(1285775393.945:10): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=791 comm="apparmor_parser" [ 127.589080] type=1400 audit(1285775398.859:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=933 comm="apparmor_parser" [ 127.591400] type=1400 audit(1285775398.859:12): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=933 comm="apparmor_parser" [ 129.729003] type=1400 audit(1285775401.000:13): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=934 comm="apparmor_parser"