[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-22-generic (buildd@rothera) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #33-Ubuntu SMP Wed Apr 28 13:27:30 UTC 2010 (Ubuntu 2.6.32-22.33-generic 2.6.32.11+drm33.2) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) [ 0.000000] BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.2 present. [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x3fff0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-DFFFF uncachable [ 0.000000] E0000-EFFFF write-protect [ 0.000000] F0000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FC0000000 write-back [ 0.000000] 1 base 0E0000000 mask FF8000000 write-combining [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 00000000000a0000 (usable) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000003fff0000 (usable) [ 0.000000] modified: 000000003fff0000 - 000000003fff3000 (ACPI NVS) [ 0.000000] modified: 000000003fff3000 - 0000000040000000 (ACPI data) [ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000ffff0000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000 [ 0.000000] RAMDISK: 2f442000 - 30033282 [ 0.000000] ACPI: RSDP 000f7550 00014 (v00 KT400 ) [ 0.000000] ACPI: RSDT 3fff3000 00028 (v01 KT400 AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: FACP 3fff3040 00074 (v01 KT400 AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: DSDT 3fff30c0 03F55 (v01 KT400 AWRDACPI 00001000 MSFT 0100000D) [ 0.000000] ACPI: FACS 3fff0000 00040 [ 0.000000] 135MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00011000 - 00017f00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008d9e98] TEXT DATA BSS ==> [0000100000 - 00008d9e98] [ 0.000000] #4 [002f442000 - 0030033282] RAMDISK ==> [002f442000 - 0030033282] [ 0.000000] #5 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] [ 0.000000] #6 [00008da000 - 00008dd08a] BRK ==> [00008da000 - 00008dd08a] [ 0.000000] #7 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000] [ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0003fff0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x000000a0 [ 0.000000] 0: 0x00000100 -> 0x0003fff0 [ 0.000000] On node 0 totalpages: 262016 [ 0.000000] free_area_init_node: node 0, pgdat c0798720, node_mem_map c1001200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3952 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 272 pages used for memmap [ 0.000000] HighMem zone: 34530 pages, LIFO batch:7 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] Found and enabled local APIC! [ 0.000000] nr_irqs_gsi: 16 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:bec00000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c1c00000 s36024 r0 d21320 u4194304 [ 0.000000] pcpu-alloc: s36024 r0 d21320 u4194304 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259968 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-22-generic root=UUID=6d7f13c6-08ba-4792-9532-ccb6398bf035 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 5242240 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:0003fff0) [ 0.000000] Memory: 1013080k/1048512k available (4673k kernel code, 34500k reserved, 2121k data, 656k init, 139208k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc07a3000 - 0xc0847000 ( 656 kB) [ 0.000000] .data : 0xc0590653 - 0xc07a2e48 (2121 kB) [ 0.000000] .text : 0xc0100000 - 0xc0590653 (4673 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:256 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1999.622 MHz processor. [ 0.008007] Calibrating delay loop (skipped), value calculated using timer frequency.. 3999.24 BogoMIPS (lpj=7998488) [ 0.008039] Security Framework initialized [ 0.008087] AppArmor: AppArmor initialized [ 0.008099] Mount-cache hash table entries: 512 [ 0.008307] Initializing cgroup subsys ns [ 0.008313] Initializing cgroup subsys cpuacct [ 0.008319] Initializing cgroup subsys memory [ 0.008333] Initializing cgroup subsys devices [ 0.008337] Initializing cgroup subsys freezer [ 0.008341] Initializing cgroup subsys net_cls [ 0.008370] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.008374] CPU: L2 Cache: 256K (64 bytes/line) [ 0.008380] mce: CPU supports 4 MCE banks [ 0.008409] Performance Events: AMD PMU driver. [ 0.008417] ... version: 0 [ 0.008420] ... bit width: 48 [ 0.008422] ... generic registers: 4 [ 0.008424] ... value mask: 0000ffffffffffff [ 0.008427] ... max period: 00007fffffffffff [ 0.008429] ... fixed-purpose events: 0 [ 0.008432] ... event mask: 000000000000000f [ 0.008437] Checking 'hlt' instruction... OK. [ 0.024675] SMP alternatives: switching to UP code [ 0.031799] Freeing SMP alternatives: 19k freed [ 0.031845] ACPI: Core revision 20090903 [ 0.040269] ACPI: setting ELCR to 0200 (from 1a20) [ 0.041660] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.041674] ftrace: allocating 21771 entries in 43 pages [ 0.044180] Enabling APIC mode: Flat. Using 0 I/O APICs [ 0.044186] weird, boot CPU (#0) not listed by the BIOS. [ 0.044189] SMP motherboard not detected. [ 0.044199] Enabling APIC mode: Flat. Using 0 I/O APICs [ 0.048001] SMP disabled [ 0.048001] Brought up 1 CPUs [ 0.048001] Total of 1 processors activated (3999.24 BogoMIPS). [ 0.048001] CPU0 attaching NULL sched-domain. [ 0.048001] devtmpfs: initialized [ 0.048001] regulator: core version 0.5 [ 0.048001] Time: 6:38:45 Date: 06/03/10 [ 0.048001] NET: Registered protocol family 16 [ 0.048001] EISA bus registered [ 0.048001] ACPI: bus type pci registered [ 0.058330] PCI: PCI BIOS revision 2.10 entry at 0xfb2e0, last bus=1 [ 0.058333] PCI: Using configuration type 1 for base access [ 0.059493] bio: create slab at 0 [ 0.060092] ACPI: EC: Look up EC in DSDT [ 0.066249] ACPI: Interpreter enabled [ 0.066259] ACPI: (supports S0 S3 S4 S5) [ 0.066287] ACPI: Using PIC for interrupt routing [ 0.071674] ACPI: No dock devices found. [ 0.071799] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.071860] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xe0000000-0xe7ffffff] [ 0.071948] pci 0000:00:01.0: supports D1 [ 0.071985] pci 0000:00:08.0: reg 10 io port: [0xc000-0xc0ff] [ 0.071992] pci 0000:00:08.0: reg 14 32bit mmio: [0xea020000-0xea0200ff] [ 0.072022] pci 0000:00:08.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] [ 0.072038] pci 0000:00:08.0: supports D1 D2 [ 0.072041] pci 0000:00:08.0: PME# supported from D1 D2 D3hot D3cold [ 0.072046] pci 0000:00:08.0: PME# disabled [ 0.072078] pci 0000:00:09.0: reg 10 32bit mmio: [0xea021000-0xea0217ff] [ 0.072086] pci 0000:00:09.0: reg 14 io port: [0xc400-0xc47f] [ 0.072122] pci 0000:00:09.0: supports D2 [ 0.072124] pci 0000:00:09.0: PME# supported from D2 D3hot D3cold [ 0.072128] pci 0000:00:09.0: PME# disabled [ 0.072160] pci 0000:00:0b.0: reg 10 io port: [0xc800-0xc83f] [ 0.072198] pci 0000:00:0b.0: supports D1 D2 [ 0.072247] pci 0000:00:10.0: reg 20 io port: [0xcc00-0xcc1f] [ 0.072270] pci 0000:00:10.0: supports D1 D2 [ 0.072272] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.072276] pci 0000:00:10.0: PME# disabled [ 0.072324] pci 0000:00:10.1: reg 20 io port: [0xd000-0xd01f] [ 0.072347] pci 0000:00:10.1: supports D1 D2 [ 0.072349] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.072354] pci 0000:00:10.1: PME# disabled [ 0.072398] pci 0000:00:10.2: reg 20 io port: [0xd400-0xd41f] [ 0.072421] pci 0000:00:10.2: supports D1 D2 [ 0.072424] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.072428] pci 0000:00:10.2: PME# disabled [ 0.072458] pci 0000:00:10.3: reg 10 32bit mmio: [0xea022000-0xea0220ff] [ 0.072496] pci 0000:00:10.3: supports D1 D2 [ 0.072498] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.072502] pci 0000:00:10.3: PME# disabled [ 0.072562] HPET not enabled in BIOS. You might try hpet=force boot option [ 0.072570] pci 0000:00:11.0: quirk: region 4000-407f claimed by vt8235 PM [ 0.072575] pci 0000:00:11.0: quirk: region 5000-500f claimed by vt8235 SMB [ 0.072634] pci 0000:00:11.1: reg 20 io port: [0xd800-0xd80f] [ 0.072716] pci 0000:01:00.0: reg 10 32bit mmio: [0xe8000000-0xe8ffffff] [ 0.072723] pci 0000:01:00.0: reg 14 32bit mmio pref: [0xd0000000-0xdfffffff] [ 0.072740] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] [ 0.072791] pci 0000:00:01.0: bridge 32bit mmio: [0xe8000000-0xe9ffffff] [ 0.072796] pci 0000:00:01.0: bridge 32bit mmio pref: [0xd0000000-0xdfffffff] [ 0.072803] pci_bus 0000:00: on NUMA node 0 [ 0.072809] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.096512] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15) [ 0.096703] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 *11 12 14 15) [ 0.096895] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 11 12 14 15) [ 0.097087] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 11 *12 14 15) [ 0.097273] ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0 [ 0.097454] ACPI: PCI Interrupt Link [ALKB] (IRQs 21) *0 [ 0.097659] ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0 [ 0.097836] ACPI: PCI Interrupt Link [ALKD] (IRQs 23) *0 [ 0.098005] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.098008] vgaarb: loaded [ 0.098188] SCSI subsystem initialized [ 0.098337] libata version 3.00 loaded. [ 0.098442] usbcore: registered new interface driver usbfs [ 0.098457] usbcore: registered new interface driver hub [ 0.098496] usbcore: registered new device driver usb [ 0.098676] ACPI: WMI: Mapper loaded [ 0.098679] PCI: Using ACPI for IRQ routing [ 0.098861] NetLabel: Initializing [ 0.098864] NetLabel: domain hash size = 128 [ 0.098866] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.098887] NetLabel: unlabeled traffic allowed by default [ 0.098947] Switching to clocksource tsc [ 0.100001] AppArmor: AppArmor Filesystem Enabled [ 0.100001] pnp: PnP ACPI init [ 0.100001] ACPI: bus type pnp registered [ 0.103193] pnp: PnP ACPI: found 14 devices [ 0.103196] ACPI: ACPI bus type pnp unregistered [ 0.103201] PnPBIOS: Disabled by ACPI PNP [ 0.103219] system 00:00: iomem range 0xd0000-0xd3fff has been reserved [ 0.103223] system 00:00: iomem range 0xf0000-0xf7fff could not be reserved [ 0.103227] system 00:00: iomem range 0xf8000-0xfbfff could not be reserved [ 0.103231] system 00:00: iomem range 0xfc000-0xfffff could not be reserved [ 0.103235] system 00:00: iomem range 0x3fff0000-0x3fffffff could not be reserved [ 0.103239] system 00:00: iomem range 0xffff0000-0xffffffff has been reserved [ 0.103242] system 00:00: iomem range 0x0-0x9ffff could not be reserved [ 0.103246] system 00:00: iomem range 0x100000-0x3ffeffff could not be reserved [ 0.103250] system 00:00: iomem range 0xfec00000-0xfec00fff has been reserved [ 0.103254] system 00:00: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.103258] system 00:00: iomem range 0xfff80000-0xfffeffff has been reserved [ 0.103267] system 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 0.103271] system 00:02: ioport range 0x800-0x805 has been reserved [ 0.103274] system 00:02: ioport range 0x290-0x297 has been reserved [ 0.138052] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.138055] pci 0000:00:01.0: IO window: disabled [ 0.138062] pci 0000:00:01.0: MEM window: 0xe8000000-0xe9ffffff [ 0.138067] pci 0000:00:01.0: PREFETCH window: 0xd0000000-0xdfffffff [ 0.138086] pci 0000:00:01.0: setting latency timer to 64 [ 0.138093] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.138096] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.138100] pci_bus 0000:01: resource 1 mem: [0xe8000000-0xe9ffffff] [ 0.138103] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff] [ 0.138157] NET: Registered protocol family 2 [ 0.138276] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.138795] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.141063] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.142173] TCP: Hash tables configured (established 131072 bind 65536) [ 0.142178] TCP reno registered [ 0.142344] NET: Registered protocol family 1 [ 0.142368] pci 0000:00:01.0: disabling DAC on VIA PCI bridge [ 0.142457] pci 0000:01:00.0: Boot video device [ 0.142777] cpufreq-nforce2: No nForce2 chipset. [ 0.142812] Scanning for low memory corruption every 60 seconds [ 0.142958] audit: initializing netlink socket (disabled) [ 0.142976] type=2000 audit(1275547125.140:1): initialized [ 0.152846] Trying to unpack rootfs image as initramfs... [ 0.165356] highmem bounce pool size: 64 pages [ 0.165365] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.167310] VFS: Disk quotas dquot_6.5.2 [ 0.167391] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.173448] fuse init (API version 7.13) [ 0.173641] msgmni has been set to 1707 [ 0.174030] alg: No test for stdrng (krng) [ 0.174072] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.174076] io scheduler noop registered [ 0.174079] io scheduler anticipatory registered [ 0.174081] io scheduler deadline registered [ 0.174127] io scheduler cfq registered (default) [ 0.174274] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.174303] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.174452] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.174459] ACPI: Power Button [PWRB] [ 0.174535] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 0.174543] ACPI: Sleep Button [SLPB] [ 0.174605] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.174609] ACPI: Power Button [PWRF] [ 0.174671] fan PNP0C0B:00: registered as cooling_device0 [ 0.174677] ACPI: Fan [FAN] (on) [ 0.174961] Marking TSC unstable due to TSC halts in idle [ 0.175020] processor LNXCPU:00: registered as cooling_device1 [ 0.177000] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.177000] ACPI: Thermal Zone [THRM] (45 C) [ 0.179094] isapnp: Scanning for PnP cards... [ 0.184611] Switching to clocksource acpi_pm [ 0.188590] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.188710] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.188809] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.189143] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.189278] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.190648] brd: module loaded [ 0.196488] loop: module loaded [ 0.196663] input: Macintosh mouse button emulation as /devices/virtual/input/input3 [ 0.197444] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 [ 0.197448] PCI: setting IRQ 11 as level-triggered [ 0.197455] pata_acpi 0000:00:11.1: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 0.197462] pata_acpi 0000:00:11.1: VIA VLink IRQ fixup, from 255 to 11 [ 0.197573] pata_acpi 0000:00:11.1: PCI INT A disabled [ 0.197951] Fixed MDIO Bus: probed [ 0.197996] PPP generic driver version 2.4.2 [ 0.198081] tun: Universal TUN/TAP device driver, 1.6 [ 0.198084] tun: (C) 1999-2004 Max Krasnyansky [ 0.198206] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.198678] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 12 [ 0.198681] PCI: setting IRQ 12 as level-triggered [ 0.198688] ehci_hcd 0000:00:10.3: PCI INT D -> Link[LNKD] -> GSI 12 (level, low) -> IRQ 12 [ 0.198714] ehci_hcd 0000:00:10.3: EHCI Host Controller [ 0.198780] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1 [ 0.198844] ehci_hcd 0000:00:10.3: irq 12, io mem 0xea022000 [ 0.248063] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00 [ 0.248305] usb usb1: configuration #1 chosen from 1 choice [ 0.248356] hub 1-0:1.0: USB hub found [ 0.248379] hub 1-0:1.0: 6 ports detected [ 0.248464] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.248490] uhci_hcd: USB Universal Host Controller Interface driver [ 0.248598] uhci_hcd 0000:00:10.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 0.248613] uhci_hcd 0000:00:10.0: UHCI Host Controller [ 0.248670] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 [ 0.248705] uhci_hcd 0000:00:10.0: irq 11, io base 0x0000cc00 [ 0.248835] usb usb2: configuration #1 chosen from 1 choice [ 0.248867] hub 2-0:1.0: USB hub found [ 0.248880] hub 2-0:1.0: 2 ports detected [ 0.249452] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 [ 0.249457] uhci_hcd 0000:00:10.1: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 0.249466] uhci_hcd 0000:00:10.1: UHCI Host Controller [ 0.249523] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 [ 0.249546] uhci_hcd 0000:00:10.1: irq 11, io base 0x0000d000 [ 0.249674] usb usb3: configuration #1 chosen from 1 choice [ 0.249706] hub 3-0:1.0: USB hub found [ 0.249719] hub 3-0:1.0: 2 ports detected [ 0.250146] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5 [ 0.250149] PCI: setting IRQ 5 as level-triggered [ 0.250156] uhci_hcd 0000:00:10.2: PCI INT C -> Link[LNKC] -> GSI 5 (level, low) -> IRQ 5 [ 0.250164] uhci_hcd 0000:00:10.2: UHCI Host Controller [ 0.250212] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 [ 0.250238] uhci_hcd 0000:00:10.2: irq 5, io base 0x0000d400 [ 0.250381] usb usb4: configuration #1 chosen from 1 choice [ 0.250421] hub 4-0:1.0: USB hub found [ 0.250434] hub 4-0:1.0: 2 ports detected [ 0.250547] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 0.250550] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 0.250709] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.250884] mice: PS/2 mouse device common for all mice [ 0.251054] rtc_cmos 00:04: RTC can wake from S4 [ 0.251118] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 0.251146] rtc0: alarms up to one year, y3k, 242 bytes nvram [ 0.251281] device-mapper: uevent: version 1.0.3 [ 0.251456] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.254483] device-mapper: multipath: version 1.1.0 loaded [ 0.254491] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.254823] EISA: Probing bus 0 at eisa.0 [ 0.254846] Cannot allocate resource for EISA slot 4 [ 0.254848] Cannot allocate resource for EISA slot 5 [ 0.254862] EISA: Detected 0 cards. [ 0.256346] cpuidle: using governor ladder [ 0.256406] cpuidle: using governor menu [ 0.256966] TCP cubic registered [ 0.257158] NET: Registered protocol family 10 [ 0.257685] lo: Disabled Privacy Extensions [ 0.258060] NET: Registered protocol family 17 [ 0.258123] powernow-k8: Processor cpuid 681 not supported [ 0.258158] Using IPI No-Shortcut mode [ 0.258315] PM: Resume from disk failed. [ 0.258337] registered taskstats version 1 [ 0.258584] Magic number: 14:438:619 [ 0.258738] rtc_cmos 00:04: setting system clock to 2010-06-03 06:38:46 UTC (1275547126) [ 0.258743] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.258745] EDD information not available. [ 0.277989] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 0.859596] isapnp: No Plug & Play device found [ 0.919994] Freeing initrd memory: 12228k freed [ 0.941737] Freeing unused kernel memory: 656k freed [ 0.942974] Write protecting the kernel text: 4676k [ 0.943010] Write protecting the kernel read-only data: 1840k [ 0.968104] usb 2-2: new low speed USB device using uhci_hcd and address 2 [ 0.981505] udev: starting version 151 [ 1.156233] usb 2-2: configuration #1 chosen from 1 choice [ 1.300049] Floppy drive(s): fd0 is 1.44M [ 1.303340] vga16fb: initializing [ 1.303349] vga16fb: mapped to 0xc00a0000 [ 1.303469] fb0: VGA16 VGA frame buffer device [ 1.311522] pata_via 0000:00:11.1: version 0.3.4 [ 1.311554] pata_via 0000:00:11.1: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 1.311561] pata_via 0000:00:11.1: VIA VLink IRQ fixup, from 255 to 11 [ 1.311803] Linux agpgart interface v0.103 [ 1.313871] scsi0 : pata_via [ 1.314293] scsi1 : pata_via [ 1.318092] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xd800 irq 14 [ 1.318097] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xd808 irq 15 [ 1.319897] FDC 0 is a post-1991 82077 [ 1.333637] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 1.333676] 8139cp 0000:00:08.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too [ 1.334211] agpgart: Detected VIA KT400/KT400A/KT600 chipset [ 1.347250] agpgart-via 0000:00:00.0: AGP aperture is 128M @ 0xe0000000 [ 1.347314] ohci1394 0000:00:09.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 1.406052] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[11] MMIO=[ea021000-ea0217ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 1.420057] usb 3-1: new full speed USB device using uhci_hcd and address 2 [ 1.599520] usb 3-1: configuration #1 chosen from 1 choice [ 1.656557] ata1.00: ATA-6: ST340014A, 3.04, max UDMA/100 [ 1.656563] ata1.00: 78165360 sectors, multi 16: LBA48 [ 1.700594] ata1.01: ATA-7: MAXTOR STM3802110A, 3.AAJ, max UDMA/100 [ 1.700598] ata1.01: 156301488 sectors, multi 16: LBA48 [ 1.716422] ata1.00: configured for UDMA/100 [ 1.775463] ata1.01: configured for UDMA/100 [ 1.775662] scsi 0:0:0:0: Direct-Access ATA ST340014A 3.04 PQ: 0 ANSI: 5 [ 1.775938] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.776481] scsi 0:0:1:0: Direct-Access ATA MAXTOR STM380211 3.AA PQ: 0 ANSI: 5 [ 1.776797] sd 0:0:1:0: Attached scsi generic sg1 type 0 [ 1.777177] sd 0:0:0:0: [sda] 78165360 512-byte logical blocks: (40.0 GB/37.2 GiB) [ 1.777248] sd 0:0:0:0: [sda] Write Protect is off [ 1.777251] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.777286] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.777503] sda: sda1 sda2 < sda5 > [ 1.816995] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.817049] sd 0:0:1:0: [sdb] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 1.817108] sd 0:0:1:0: [sdb] Write Protect is off [ 1.817112] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.817143] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.817345] sdb: sdb1 [ 1.840775] sd 0:0:1:0: [sdb] Attached SCSI disk [ 1.948369] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-4163B, A101, max UDMA/33 [ 1.948404] ata2.01: ATAPI: HL-DT-STDVD-ROM GDR8161B, 0102, max UDMA/33 [ 1.964246] ata2.00: configured for UDMA/33 [ 1.980242] ata2.01: configured for UDMA/33 [ 1.987627] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-4163B A101 PQ: 0 ANSI: 5 [ 2.000139] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.000146] Uniform CD-ROM driver Revision: 3.20 [ 2.000582] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.000778] sr 1:0:0:0: Attached scsi generic sg2 type 5 [ 2.007755] scsi 1:0:1:0: CD-ROM HL-DT-ST DVD-ROM GDR8161B 0102 PQ: 0 ANSI: 5 [ 2.024457] sr1: scsi3-mmc drive: 20x/48x cd/rw xa/form2 cdda tray [ 2.024948] sr 1:0:1:0: Attached scsi CD-ROM sr1 [ 2.025135] sr 1:0:1:0: Attached scsi generic sg3 type 5 [ 2.052840] 8139too Fast Ethernet driver 0.9.28 [ 2.052914] 8139too 0000:00:08.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 2.054020] eth0: RealTek RTL8139 at 0xc000, 00:13:f7:89:f3:5d, IRQ 11 [ 2.058464] usbcore: registered new interface driver hiddev [ 2.058898] usbcore: registered new interface driver usbhid [ 2.059030] usbhid: v2.6:USB HID core driver [ 2.196832] input: USB Optical Mouse USB Optical Mouse as /devices/pci0000:00/0000:00:10.0/usb2/2-2/2-2:1.0/input/input5 [ 2.197007] a4tech 0003:09DA:0006.0001: input,hidraw0: USB HID v1.10 Mouse [USB Optical Mouse USB Optical Mouse] on usb-0000:00:10.0-2/input0 [ 2.207188] Console: switching to colour frame buffer device 80x30 [ 2.684237] ieee1394: Host added: ID:BUS[0-00:1023] GUID[2000000003000e6a] [ 3.072040] uvesafb: NVIDIA Corporation, NV34 Board - p162-11n, Chip Rev , OEM: NVIDIA, VBE v3.0 [ 3.085454] uvesafb: protected mode interface info at c000:e2e0 [ 3.085459] uvesafb: pmi: set display start = c00ce316, set palette = c00ce380 [ 3.085461] uvesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da [ 3.087179] uvesafb: VBIOS/hardware supports DDC2 transfers [ 3.163544] uvesafb: monitor limits: vf = 75 Hz, hf = 81 kHz, clk = 140 MHz [ 3.168199] uvesafb: scrolling: ywrap using protected mode interface, yres_virtual=39321 [ 3.169761] uvesafb: framebuffer at 0xd0000000, mapped to 0xf8180000, using 24576k, total 262144k [ 3.169767] fb1: VESA VGA frame buffer device [ 3.278695] EXT4-fs (sda1): mounted filesystem with ordered data mode [ 11.414843] Adding 1648632k swap on /dev/sda5. Priority:-1 extents:1 across:1648632k [ 11.457321] udev: starting version 151 [ 11.612491] lp: driver loaded but no devices found [ 12.125904] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 12.128153] irda_init() [ 12.128189] NET: Registered protocol family 23 [ 12.142215] parport_pc 00:0a: reported by Plug and Play ACPI [ 12.142265] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 12.177171] usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0xC302 [ 12.177217] usbcore: registered new interface driver usblp [ 12.228382] lp0: using parport0 (interrupt-driven). [ 12.467060] type=1505 audit(1275539938.705:2): operation="profile_load" pid=581 name="/sbin/dhclient3" [ 12.467415] type=1505 audit(1275539938.705:3): operation="profile_load" pid=581 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 12.467619] type=1505 audit(1275539938.705:4): operation="profile_load" pid=581 name="/usr/lib/connman/scripts/dhclient-script" [ 12.500131] gameport: NS558 PnP Gameport is pnp00:0d/gameport0, io 0x201, speed 917kHz [ 12.662182] nvidia: module license 'NVIDIA' taints kernel. [ 12.662189] Disabling lock debugging due to kernel taint [ 13.526738] ppdev: user-space parallel port driver [ 13.725439] ENS1371 0000:00:0b.0: PCI INT A -> Link[LNKD] -> GSI 12 (level, low) -> IRQ 12 [ 13.725528] nvidia 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 13.731558] NVRM: loading NVIDIA UNIX x86 Kernel Module 173.14.22 Sun Nov 8 20:26:31 PST 2009 [ 14.451838] type=1505 audit(1275539940.689:5): operation="profile_load" pid=750 name="/usr/share/gdm/guest-session/Xsession" [ 14.466683] type=1505 audit(1275539940.705:6): operation="profile_replace" pid=752 name="/sbin/dhclient3" [ 14.467066] type=1505 audit(1275539940.705:7): operation="profile_replace" pid=752 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 14.467278] type=1505 audit(1275539940.705:8): operation="profile_replace" pid=752 name="/usr/lib/connman/scripts/dhclient-script" [ 14.518345] type=1505 audit(1275539940.757:9): operation="profile_load" pid=753 name="/usr/bin/evince" [ 14.522563] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1 [ 14.566626] type=1505 audit(1275539940.805:10): operation="profile_load" pid=753 name="/usr/bin/evince-previewer" [ 14.577558] type=1505 audit(1275539940.817:11): operation="profile_load" pid=753 name="/usr/bin/evince-thumbnailer" [ 15.457472] agpgart-via 0000:00:00.0: AGP 3.5 bridge [ 15.457495] agpgart-via 0000:00:00.0: putting AGP V3 device into 8x mode [ 15.457547] nvidia 0000:01:00.0: putting AGP V3 device into 8x mode [ 16.983162] usb 3-1: usbfs: interface 0 claimed by usblp while 'usb' sets config #1 [ 24.712036] eth0: no IPv6 routers present [ 28.372066] end_request: I/O error, dev fd0, sector 0 [ 28.424078] end_request: I/O error, dev fd0, sector 0