| 2009-01-09 18:34:21 |
Pierre-Henri Berard |
description |
In ubuntu 8.10 , there are some problems regarding file transfert with my Sony Ericsson C702 cell phone through USB cable. If the phone is put in "USB mass storage mode" I have the following kernel logs when the phone is plugged in:
[ 2189.073048] usb 3-5: new high speed USB device using ehci_hcd and address 6
[ 2189.597178] usb 3-5: configuration #2 chosen from 1 choice
[ 2189.599194] scsi5 : SCSI emulation for USB Mass Storage devices
[ 2189.599877] usb-storage: device found at 6
[ 2189.599890] usb-storage: waiting for device to settle before scanning
[ 2194.955706] usb-storage: device scan complete
[ 2194.958037] scsi 5:0:0:0: Direct-Access Sony Eri Memory Stick 0 PQ: 0 ANSI: 0
[ 2194.959382] scsi 5:0:0:1: Direct-Access Sony Eri Memory Stick 0 PQ: 0 ANSI: 0
[ 2194.963136] sd 5:0:0:0: [sdg] 368493 512-byte hardware sectors (189 MB)
[ 2194.965495] sd 5:0:0:0: [sdg] Test WP failed, assume Write Enabled
[ 2194.965507] sd 5:0:0:0: [sdg] Assuming drive cache: write through
[ 2194.970990] sd 5:0:0:0: [sdg] 368493 512-byte hardware sectors (189 MB)
[ 2194.974241] sd 5:0:0:0: [sdg] Test WP failed, assume Write Enabled
[ 2194.974252] sd 5:0:0:0: [sdg] Assuming drive cache: write through
[ 2194.978098] sdg: sdg1
[ 2194.988518] sd 5:0:0:0: [sdg] Attached SCSI removable disk
[ 2194.990490] sd 5:0:0:0: Attached scsi generic sg7 type 0
[ 2195.004561] sd 5:0:0:1: [sdh] 3995648 512-byte hardware sectors (2046 MB)
[ 2195.011383] sd 5:0:0:1: [sdh] Test WP failed, assume Write Enabled
[ 2195.011395] sd 5:0:0:1: [sdh] Assuming drive cache: write through
[ 2195.017371] sd 5:0:0:1: [sdh] 3995648 512-byte hardware sectors (2046 MB)
[ 2195.021006] sd 5:0:0:1: [sdh] Test WP failed, assume Write Enabled
[ 2195.021018] sd 5:0:0:1: [sdh] Assuming drive cache: write through
[ 2195.024774] sdh: sdh1
[ 2195.031248] sd 5:0:0:1: [sdh] Attached SCSI removable disk
[ 2195.033156] sd 5:0:0:1: Attached scsi generic sg8 type 0
[ 2225.377049] usb 3-5: reset high speed USB device using ehci_hcd and address 6
And no icon appears in nautilus!!!!!
If the phone is put in "Phone mode" I have the following kernel logs when the phone is plugged in:
[ 1242.048045] usb 3-5: new high speed USB device using ehci_hcd and address 4
[ 1242.190192] usb 3-5: configuration #3 chosen from 1 choice
[ 1242.598937] cdc_acm 3-5:3.1: ttyACM0: USB ACM device
[ 1242.601716] cdc_acm 3-5:3.3: ttyACM1: USB ACM device
[ 1242.602841] usbcore: registered new interface driver cdc_acm
[ 1242.602862] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
[ 1242.704414] usb0: register 'cdc_ether' at usb-0000:00:13.2-5, CDC Ethernet Device, 02:80:37:0e:03:00
[ 1242.704734] usbcore: registered new interface driver cdc_ether
The corresponding icons appears but the free memory from the card (M2) ist wrong. The memory card isn't correct recognise. I thing that it's show the free memory from the phone and attribute it to the memory card too.
Ubuntu Intrepid 8.10 |
In ubuntu 8.10 , there are some problems regarding file transfert with my Sony Ericsson C702 cell phone through USB cable. If the phone is put in "USB mass storage mode" I have the following kernel logs when the phone is plugged in:
[ 2189.073048] usb 3-5: new high speed USB device using ehci_hcd and address 6
[ 2189.597178] usb 3-5: configuration #2 chosen from 1 choice
[ 2189.599194] scsi5 : SCSI emulation for USB Mass Storage devices
[ 2189.599877] usb-storage: device found at 6
[ 2189.599890] usb-storage: waiting for device to settle before scanning
[ 2194.955706] usb-storage: device scan complete
[ 2194.958037] scsi 5:0:0:0: Direct-Access Sony Eri Memory Stick 0 PQ: 0 ANSI: 0
[ 2194.959382] scsi 5:0:0:1: Direct-Access Sony Eri Memory Stick 0 PQ: 0 ANSI: 0
[ 2194.963136] sd 5:0:0:0: [sdg] 368493 512-byte hardware sectors (189 MB)
[ 2194.965495] sd 5:0:0:0: [sdg] Test WP failed, assume Write Enabled
[ 2194.965507] sd 5:0:0:0: [sdg] Assuming drive cache: write through
[ 2194.970990] sd 5:0:0:0: [sdg] 368493 512-byte hardware sectors (189 MB)
[ 2194.974241] sd 5:0:0:0: [sdg] Test WP failed, assume Write Enabled
[ 2194.974252] sd 5:0:0:0: [sdg] Assuming drive cache: write through
[ 2194.978098] sdg: sdg1
[ 2194.988518] sd 5:0:0:0: [sdg] Attached SCSI removable disk
[ 2194.990490] sd 5:0:0:0: Attached scsi generic sg7 type 0
[ 2195.004561] sd 5:0:0:1: [sdh] 3995648 512-byte hardware sectors (2046 MB)
[ 2195.011383] sd 5:0:0:1: [sdh] Test WP failed, assume Write Enabled
[ 2195.011395] sd 5:0:0:1: [sdh] Assuming drive cache: write through
[ 2195.017371] sd 5:0:0:1: [sdh] 3995648 512-byte hardware sectors (2046 MB)
[ 2195.021006] sd 5:0:0:1: [sdh] Test WP failed, assume Write Enabled
[ 2195.021018] sd 5:0:0:1: [sdh] Assuming drive cache: write through
[ 2195.024774] sdh: sdh1
[ 2195.031248] sd 5:0:0:1: [sdh] Attached SCSI removable disk
[ 2195.033156] sd 5:0:0:1: Attached scsi generic sg8 type 0
[ 2225.377049] usb 3-5: reset high speed USB device using ehci_hcd and address 6
And no new icon appears in nautilus!!!!!
Impossible to mount the new usb mass storage device.
If the phone is put in "Phone mode" I have the following kernel logs when the phone is plugged in:
[ 1242.048045] usb 3-5: new high speed USB device using ehci_hcd and address 4
[ 1242.190192] usb 3-5: configuration #3 chosen from 1 choice
[ 1242.598937] cdc_acm 3-5:3.1: ttyACM0: USB ACM device
[ 1242.601716] cdc_acm 3-5:3.3: ttyACM1: USB ACM device
[ 1242.602841] usbcore: registered new interface driver cdc_acm
[ 1242.602862] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
[ 1242.704414] usb0: register 'cdc_ether' at usb-0000:00:13.2-5, CDC Ethernet Device, 02:80:37:0e:03:00
[ 1242.704734] usbcore: registered new interface driver cdc_ether
The corresponding icons appears but the free memory from the card (M2) ist wrong. The memory card isn't correct recognise. I thing that it's show the free memory from the phone and attribute it to the memory card too.
After lsusb:
Bus 003 Device 005: ID 0fce:d0d9 Sony Ericsson Mobile Communications AB
Bus 003 Device 002: ID 0471:0333 Philips
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 002: ID 058f:9360 Alcor Micro Corp. 8-in-1 Media Card Reader
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 046d:c526 Logitech, Inc.
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Ubuntu Intrepid 8.10 |
|
