Dumping 99 device(s) from the Global Device List: ------------------------------------------------- udi = '/org/freedesktop/Hal/devices/computer' info.addons = {'hald-addon-cpufreq', 'hald-addon-acpi'} (string list) info.callouts.add = {'hal-acl-tool --remove-all', 'hal-storage-cleanup-all-mountpoints'} (string list) info.callouts.session_active = {'hal-acl-tool --reconfigure'} (string list) info.callouts.session_add = {'hal-acl-tool --reconfigure'} (string list) info.callouts.session_inactive = {'hal-acl-tool --reconfigure'} (string list) info.callouts.session_remove = {'hal-acl-tool --reconfigure'} (string list) info.interfaces = {'org.freedesktop.Hal.Device.SystemPowerManagement'} (string list) info.product = 'Computer' (string) info.subsystem = 'unknown' (string) info.udi = '/org/freedesktop/Hal/devices/computer' (string) org.freedesktop.Hal.Device.SystemPowerManagement.method_argnames = {'num_seconds_to_sleep', 'num_seconds_to_sleep', '', '', '', 'enable_power_save'} (string list) org.freedesktop.Hal.Device.SystemPowerManagement.method_execpaths = {'hal-system-power-suspend', 'hal-system-power-suspend-hybrid', 'hal-system-power-hibernate', 'hal-system-power-shutdown', 'hal-system-power-reboot', 'hal-system-power-set-power-save'} (string list) org.freedesktop.Hal.Device.SystemPowerManagement.method_names = {'Suspend', 'SuspendHybrid', 'Hibernate', 'Shutdown', 'Reboot', 'SetPowerSave'} (string list) org.freedesktop.Hal.Device.SystemPowerManagement.method_signatures = {'i', 'i', '', '', '', 'b'} (string list) power_management.acpi.linux.version = '20070126' (string) power_management.can_hibernate = true (bool) power_management.can_suspend = true (bool) power_management.can_suspend_hybrid = false (bool) power_management.can_suspend_to_disk = true (bool) power_management.can_suspend_to_ram = true (bool) power_management.is_powersave_set = false (bool) power_management.type = 'acpi' (string) system.chassis.manufacturer = 'NEC COMPUTERS INTERNATIONAL' (string) system.chassis.type = 'Desktop' (string) system.firmware.release_date = '09/17/2005' (string) system.firmware.vendor = 'Award Software International, Inc.' (string) system.firmware.version = '10f' (string) system.formfactor = 'desktop' (string) system.hardware.primary_video.product = 355 (0x163) (int) system.hardware.primary_video.vendor = 4318 (0x10de) (int) system.hardware.product = '00000000000000000000000' (string) system.hardware.serial = '049695720228' (string) system.hardware.uuid = 'FCF6BF00-3383-DA11-8000-4E45435F4349' (string) system.hardware.vendor = 'Packard Bell NEC' (string) system.hardware.version = 'PB34232101' (string) system.kernel.machine = 'i686' (string) system.kernel.name = 'Linux' (string) system.kernel.version = '2.6.24-19-generic' (string) udi = '/org/freedesktop/Hal/devices/platform_bluetooth' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Platform Device (bluetooth)' (string) info.subsystem = 'platform' (string) info.udi = '/org/freedesktop/Hal/devices/platform_bluetooth' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'platform' (string) linux.sysfs_path = '/sys/devices/platform/bluetooth' (string) platform.id = 'bluetooth' (string) udi = '/org/freedesktop/Hal/devices/acpi_CPU0' info.capabilities = {'processor'} (string list) info.category = 'processor' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Intel(R) Pentium(R) 4 CPU 3.06GHz' (string) info.udi = '/org/freedesktop/Hal/devices/acpi_CPU0' (string) linux.acpi_path = '/proc/acpi/processor/CPU0' (string) linux.acpi_type = 1 (0x1) (int) linux.hotplug_type = 4 (0x4) (int) processor.can_throttle = true (bool) processor.number = 0 (0x0) (int) udi = '/org/freedesktop/Hal/devices/acpi_CPU1' info.capabilities = {'processor'} (string list) info.category = 'processor' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Intel(R) Pentium(R) 4 CPU 3.06GHz' (string) info.udi = '/org/freedesktop/Hal/devices/acpi_CPU1' (string) linux.acpi_path = '/proc/acpi/processor/CPU1' (string) linux.acpi_type = 1 (0x1) (int) linux.hotplug_type = 4 (0x4) (int) processor.can_throttle = true (bool) processor.number = 1 (0x1) (int) udi = '/org/freedesktop/Hal/devices/computer_alsa_timer' access_control.file = '/dev/snd/timer' (string) access_control.type = 'sound' (string) alsa.device_file = '/dev/snd/timer' (string) alsa.type = 'timer' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'alsa', 'access_control'} (string list) info.category = 'alsa' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'ALSA Timer Device' (string) info.udi = '/org/freedesktop/Hal/devices/computer_alsa_timer' (string) linux.device_file = '/dev/snd/timer' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/virtual/sound/timer' (string) udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer_0' access_control.file = '/dev/sequencer2' (string) access_control.type = 'sound' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'oss', 'access_control'} (string list) info.category = 'oss' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'OSS Sequencer Device' (string) info.udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer_0' (string) linux.device_file = '/dev/sequencer2' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/virtual/sound/sequencer2' (string) oss.device_file = '/dev/sequencer2' (string) oss.type = 'sequencer' (string) udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer' access_control.file = '/dev/sequencer' (string) access_control.type = 'sound' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'oss', 'access_control'} (string list) info.category = 'oss' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'OSS Sequencer Device' (string) info.udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer' (string) linux.device_file = '/dev/sequencer' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/virtual/sound/sequencer' (string) oss.device_file = '/dev/sequencer' (string) oss.type = 'sequencer' (string) udi = '/org/freedesktop/Hal/devices/computer_alsa_sequencer' access_control.file = '/dev/snd/seq' (string) access_control.type = 'sound' (string) alsa.device_file = '/dev/snd/seq' (string) alsa.type = 'sequencer' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'alsa', 'access_control'} (string list) info.category = 'alsa' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'ALSA Sequencer Device' (string) info.udi = '/org/freedesktop/Hal/devices/computer_alsa_sequencer' (string) linux.device_file = '/dev/snd/seq' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/virtual/sound/seq' (string) udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_1' button.has_state = false (bool) button.type = 'power' (string) info.addons.singleton = {'hald-addon-input'} (string list) info.capabilities = {'input', 'button'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Power Button (CM)' (string) info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_1' (string) input.device = '/dev/input/event5' (string) input.product = 'Power Button (CM)' (string) linux.device_file = '/dev/input/event5' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/virtual/input/input5/event5' (string) udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_0' button.has_state = false (bool) button.type = 'power' (string) info.addons.singleton = {'hald-addon-input'} (string list) info.capabilities = {'input', 'button'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Power Button (FF)' (string) info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_0' (string) input.device = '/dev/input/event4' (string) input.product = 'Power Button (FF)' (string) linux.device_file = '/dev/input/event4' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/virtual/input/input4/event4' (string) udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input' info.capabilities = {'input', 'input.mouse'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Macintosh mouse button emulation' (string) info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input' (string) input.device = '/dev/input/event0' (string) input.product = 'Macintosh mouse button emulation' (string) linux.device_file = '/dev/input/event0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/virtual/input/input0/event0' (string) udi = '/org/freedesktop/Hal/devices/pnp_INT0800' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'PnP Device (INT0800)' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_INT0800' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:0e' (string) pnp.id = 'INT0800' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01' info.linux.driver = 'system' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'System Board' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:0d' (string) pnp.description = 'System Board' (string) pnp.id = 'PNP0c01' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_1' info.linux.driver = 'system' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_1' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:0c' (string) pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string) pnp.id = 'PNP0c02' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_0' info.linux.driver = 'system' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:0b' (string) pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string) pnp.id = 'PNP0c02' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0303' info.linux.driver = 'i8042 kbd' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'IBM Enhanced (101/102-key, PS/2 mouse support)' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0303' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:0a' (string) pnp.description = 'IBM Enhanced (101/102-key, PS/2 mouse support)' (string) pnp.id = 'PNP0303' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0f13' info.linux.driver = 'i8042 aux' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'PS/2 Port for PS/2-style Mice' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0f13' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:09' (string) pnp.description = 'PS/2 Port for PS/2-style Mice' (string) pnp.id = 'PNP0f13' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0401' info.linux.driver = 'parport_pc' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'ECP printer port' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0401' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:08' (string) pnp.description = 'ECP printer port' (string) pnp.id = 'PNP0401' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0501_0' info.linux.driver = 'serial' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = '16550A-compatible COM port' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0501_0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:07' (string) pnp.description = '16550A-compatible COM port' (string) pnp.id = 'PNP0501' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0501_0_serial_platform_1' info.capabilities = {'serial'} (string list) info.category = 'serial' (string) info.parent = '/org/freedesktop/Hal/devices/pnp_PNP0501_0' (string) info.product = '16550A-compatible COM port' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0501_0_serial_platform_1' (string) linux.device_file = '/dev/ttyS1' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'tty' (string) linux.sysfs_path = '/sys/devices/pnp0/00:07/tty/ttyS1' (string) serial.device = '/dev/ttyS1' (string) serial.originating_device = '/org/freedesktop/Hal/devices/pnp_PNP0501_0' (string) serial.port = 1 (0x1) (int) serial.type = 'platform' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0501' info.linux.driver = 'serial' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = '16550A-compatible COM port' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0501' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:06' (string) pnp.description = '16550A-compatible COM port' (string) pnp.id = 'PNP0501' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0501_serial_platform_0' info.capabilities = {'serial'} (string list) info.category = 'serial' (string) info.parent = '/org/freedesktop/Hal/devices/pnp_PNP0501' (string) info.product = '16550A-compatible COM port' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0501_serial_platform_0' (string) linux.device_file = '/dev/ttyS0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'tty' (string) linux.sysfs_path = '/sys/devices/pnp0/00:06/tty/ttyS0' (string) serial.device = '/dev/ttyS0' (string) serial.originating_device = '/org/freedesktop/Hal/devices/pnp_PNP0501' (string) serial.port = 0 (0x0) (int) serial.type = 'platform' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0c04' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Math Coprocessor' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c04' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:05' (string) pnp.description = 'Math Coprocessor' (string) pnp.id = 'PNP0c04' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0800' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'AT-style speaker sound' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0800' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:04' (string) pnp.description = 'AT-style speaker sound' (string) pnp.id = 'PNP0800' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0b00' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'AT Real-Time Clock' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0b00' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:03' (string) pnp.description = 'AT Real-Time Clock' (string) pnp.id = 'PNP0b00' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0200' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'AT DMA Controller' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0200' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:02' (string) pnp.description = 'AT DMA Controller' (string) pnp.id = 'PNP0200' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02' info.linux.driver = 'system' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:01' (string) pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string) pnp.id = 'PNP0c02' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0a03' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'PCI Bus' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0a03' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:00' (string) pnp.description = 'PCI Bus' (string) pnp.id = 'PNP0a03' (string) udi = '/org/freedesktop/Hal/devices/platform_serial8250' info.linux.driver = 'serial8250' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Platform Device (serial8250)' (string) info.subsystem = 'platform' (string) info.udi = '/org/freedesktop/Hal/devices/platform_serial8250' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'platform' (string) linux.sysfs_path = '/sys/devices/platform/serial8250' (string) platform.id = 'serial8250' (string) udi = '/org/freedesktop/Hal/devices/platform_pcspkr' info.linux.driver = 'pcspkr' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Platform Device (pcspkr)' (string) info.subsystem = 'platform' (string) info.udi = '/org/freedesktop/Hal/devices/platform_pcspkr' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'platform' (string) linux.sysfs_path = '/sys/devices/platform/pcspkr' (string) platform.id = 'pcspkr' (string) udi = '/org/freedesktop/Hal/devices/platform_pcspkr_logicaldev_input' info.capabilities = {'input'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/platform_pcspkr' (string) info.product = 'PC Speaker' (string) info.udi = '/org/freedesktop/Hal/devices/platform_pcspkr_logicaldev_input' (string) input.device = '/dev/input/event2' (string) input.originating_device = '/org/freedesktop/Hal/devices/platform_pcspkr' (string) input.product = 'PC Speaker' (string) linux.device_file = '/dev/input/event2' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/platform/pcspkr/input/input2/event2' (string) udi = '/org/freedesktop/Hal/devices/platform_iTCO_wdt' info.linux.driver = 'iTCO_wdt' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Platform Device (iTCO_wdt)' (string) info.subsystem = 'platform' (string) info.udi = '/org/freedesktop/Hal/devices/platform_iTCO_wdt' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'platform' (string) linux.sysfs_path = '/sys/devices/platform/iTCO_wdt' (string) platform.id = 'iTCO_wdt' (string) udi = '/org/freedesktop/Hal/devices/platform_i8042' info.linux.driver = 'i8042' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Platform Device (i8042)' (string) info.subsystem = 'platform' (string) info.udi = '/org/freedesktop/Hal/devices/platform_i8042' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'platform' (string) linux.sysfs_path = '/sys/devices/platform/i8042' (string) platform.id = 'i8042' (string) udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port' info.linux.driver = 'psmouse' (string) info.parent = '/org/freedesktop/Hal/devices/platform_i8042' (string) info.product = 'i8042 AUX port' (string) info.subsystem = 'serio' (string) info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'serio' (string) linux.sysfs_path = '/sys/devices/platform/i8042/serio1' (string) serio.description = 'i8042 AUX port' (string) serio.id = 'serio1' (string) udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port_logicaldev_input' info.capabilities = {'input', 'input.mouse'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port' (string) info.product = 'ImPS/2 Generic Wheel Mouse' (string) info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port_logicaldev_input' (string) input.device = '/dev/input/event3' (string) input.originating_device = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port' (string) input.product = 'ImPS/2 Generic Wheel Mouse' (string) linux.device_file = '/dev/input/event3' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/platform/i8042/serio1/input/input3/event3' (string) udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port' info.linux.driver = 'atkbd' (string) info.parent = '/org/freedesktop/Hal/devices/platform_i8042' (string) info.product = 'i8042 KBD port' (string) info.subsystem = 'serio' (string) info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'serio' (string) linux.sysfs_path = '/sys/devices/platform/i8042/serio0' (string) serio.description = 'i8042 KBD port' (string) serio.id = 'serio0' (string) udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port_logicaldev_input' info.addons.singleton = {'hald-addon-input'} (string list) info.capabilities = {'input', 'input.keyboard', 'input.keypad', 'input.keys', 'button'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port' (string) info.product = 'AT Translated Set 2 keyboard' (string) info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port_logicaldev_input' (string) input.device = '/dev/input/event1' (string) input.originating_device = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port' (string) input.product = 'AT Translated Set 2 keyboard' (string) input.xkb.layout = 'us' (string) input.xkb.model = 'evdev' (string) input.xkb.rules = 'base' (string) input.xkb.variant = '' (string) linux.device_file = '/dev/input/event1' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/platform/i8042/serio0/input/input1/event1' (string) udi = '/org/freedesktop/Hal/devices/platform_eisa_0' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Platform Device (eisa.0)' (string) info.subsystem = 'platform' (string) info.udi = '/org/freedesktop/Hal/devices/platform_eisa_0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'platform' (string) linux.sysfs_path = '/sys/devices/platform/eisa.0' (string) platform.id = 'eisa.0' (string) udi = '/org/freedesktop/Hal/devices/pci_8086_266a' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = '82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_266a' (string) info.vendor = 'Intel Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.3' (string) pci.device_class = 12 (0xc) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 5 (0x5) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.3' (string) pci.product = '82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller' (string) pci.product_id = 9834 (0x266a) (int) pci.subsys_product_id = 57361 (0xe011) (int) pci.subsys_vendor_id = 5681 (0x1631) (int) pci.vendor = 'Intel Corporation' (string) pci.vendor_id = 32902 (0x8086) (int) udi = '/org/freedesktop/Hal/devices/pci_8086_2651' info.linux.driver = 'ata_piix' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = '82801FB/FW (ICH6/ICH6W) SATA Controller' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_2651' (string) info.vendor = 'Intel Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2' (string) pci.device_class = 1 (0x1) (int) pci.device_protocol = 128 (0x80) (int) pci.device_subclass = 1 (0x1) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2' (string) pci.product = '82801FB/FW (ICH6/ICH6W) SATA Controller' (string) pci.product_id = 9809 (0x2651) (int) pci.subsys_product_id = 57361 (0xe011) (int) pci.subsys_vendor_id = 5681 (0x1631) (int) pci.vendor = 'Intel Corporation' (string) pci.vendor_id = 32902 (0x8086) (int) udi = '/org/freedesktop/Hal/devices/pci_8086_2651_scsi_host_0' info.capabilities = {'scsi_host'} (string list) info.category = 'scsi_host' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_2651' (string) info.product = 'SCSI Host Adapter' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_2651_scsi_host_0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_host' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host1' (string) scsi_host.host = 1 (0x1) (int) udi = '/org/freedesktop/Hal/devices/pci_8086_2651_scsi_host_0_scsi_device_lun0' info.linux.driver = 'sr' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_2651_scsi_host_0' (string) info.product = 'SCSI Device' (string) info.subsystem = 'scsi' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_2651_scsi_host_0_scsi_device_lun0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0' (string) scsi.bus = 0 (0x0) (int) scsi.host = 1 (0x1) (int) scsi.lun = 0 (0x0) (int) scsi.model = 'DVD_RW ND-3550A' (string) scsi.target = 0 (0x0) (int) scsi.type = 'cdrom' (string) scsi.vendor = '_NEC' (string) udi = '/org/freedesktop/Hal/devices/storage_model_DVD_RW_ND_3550A' access_control.file = '/dev/scd0' (string) access_control.type = 'cdrom' (string) block.device = '/dev/scd0' (string) block.is_volume = false (bool) block.major = 11 (0xb) (int) block.minor = 0 (0x0) (int) block.storage_device = '/org/freedesktop/Hal/devices/storage_model_DVD_RW_ND_3550A' (string) info.addons = {'hald-addon-storage'} (string list) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'storage', 'block', 'storage.cdrom', 'access_control'} (string list) info.category = 'storage' (string) info.interfaces = {'org.freedesktop.Hal.Device.Storage', 'org.freedesktop.Hal.Device.Storage', 'org.freedesktop.Hal.Device.Storage.Removable'} (string list) info.parent = '/org/freedesktop/Hal/devices/pci_8086_2651_scsi_host_0_scsi_device_lun0' (string) info.product = 'DVD_RW ND-3550A' (string) info.udi = '/org/freedesktop/Hal/devices/storage_model_DVD_RW_ND_3550A' (string) info.vendor = '_NEC' (string) linux.hotplug_type = 3 (0x3) (int) linux.sysfs_path = '/sys/block/sr0' (string) org.freedesktop.Hal.Device.Storage.method_argnames = {'extra_options', 'extra_options'} (string list) org.freedesktop.Hal.Device.Storage.method_execpaths = {'hal-storage-eject', 'hal-storage-closetray'} (string list) org.freedesktop.Hal.Device.Storage.method_names = {'Eject', 'CloseTray'} (string list) org.freedesktop.Hal.Device.Storage.method_signatures = {'as', 'as'} (string list) storage.automount_enabled_hint = true (bool) storage.bus = 'scsi' (string) storage.cdrom.bd = false (bool) storage.cdrom.bdr = false (bool) storage.cdrom.bdre = false (bool) storage.cdrom.cdr = true (bool) storage.cdrom.cdrw = true (bool) storage.cdrom.dvd = true (bool) storage.cdrom.dvdplusr = true (bool) storage.cdrom.dvdplusrdl = true (bool) storage.cdrom.dvdplusrw = true (bool) storage.cdrom.dvdplusrwdl = false (bool) storage.cdrom.dvdr = true (bool) storage.cdrom.dvdram = false (bool) storage.cdrom.dvdrw = true (bool) storage.cdrom.hddvd = false (bool) storage.cdrom.hddvdr = false (bool) storage.cdrom.hddvdrw = false (bool) storage.cdrom.mo = false (bool) storage.cdrom.mrw = true (bool) storage.cdrom.mrw_w = true (bool) storage.cdrom.read_speed = 8467 (0x2113) (int) storage.cdrom.support_media_changed = true (bool) storage.cdrom.support_multisession = true (bool) storage.cdrom.write_speed = 8467 (0x2113) (int) storage.cdrom.write_speeds = {'8467', '7056', '5645', '4234', '2822', '1411'} (string list) storage.drive_type = 'cdrom' (string) storage.firmware_version = '1.52' (string) storage.hotpluggable = false (bool) storage.lun = 0 (0x0) (int) storage.media_check_enabled = true (bool) storage.model = 'DVD_RW ND-3550A' (string) storage.no_partitions_hint = true (bool) storage.originating_device = '/org/freedesktop/Hal/devices/computer' (string) storage.partitioning_scheme = '' (string) storage.removable = true (bool) storage.removable.media_available = false (bool) storage.removable.support_async_notification = false (bool) storage.requires_eject = true (bool) storage.size = 0 (0x0) (uint64) storage.vendor = '_NEC' (string) udi = '/org/freedesktop/Hal/devices/pci_8086_2651_scsi_host_0_scsi_device_lun0_scsi_generic' info.capabilities = {'scsi_generic'} (string list) info.category = 'scsi_generic' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_2651_scsi_host_0_scsi_device_lun0' (string) info.product = 'SCSI Generic Interface' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_2651_scsi_host_0_scsi_device_lun0_scsi_generic' (string) linux.device_file = '/dev/sg1' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_generic' (string) linux.sysfs_path = '/sys/class/scsi_generic/sg1' (string) scsi_generic.device = '/dev/sg1' (string) udi = '/org/freedesktop/Hal/devices/pci_8086_2651_scsi_host' info.capabilities = {'scsi_host'} (string list) info.category = 'scsi_host' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_2651' (string) info.product = 'SCSI Host Adapter' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_2651_scsi_host' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_host' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host0' (string) scsi_host.host = 0 (0x0) (int) udi = '/org/freedesktop/Hal/devices/pci_8086_2651_scsi_host_scsi_device_lun0' info.linux.driver = 'sd' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_2651_scsi_host' (string) info.product = 'SCSI Device' (string) info.subsystem = 'scsi' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_2651_scsi_host_scsi_device_lun0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0' (string) scsi.bus = 0 (0x0) (int) scsi.host = 0 (0x0) (int) scsi.lun = 0 (0x0) (int) scsi.model = 'ST3160023AS' (string) scsi.target = 0 (0x0) (int) scsi.type = 'disk' (string) scsi.vendor = 'ATA' (string) udi = '/org/freedesktop/Hal/devices/storage_serial_1ATA_ST3160023AS_4LJ2YFL5' block.device = '/dev/sda' (string) block.is_volume = false (bool) block.major = 8 (0x8) (int) block.minor = 0 (0x0) (int) block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_1ATA_ST3160023AS_4LJ2YFL5' (string) info.capabilities = {'storage', 'block'} (string list) info.category = 'storage' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_2651_scsi_host_scsi_device_lun0' (string) info.product = 'ST3160023AS' (string) info.udi = '/org/freedesktop/Hal/devices/storage_serial_1ATA_ST3160023AS_4LJ2YFL5' (string) info.vendor = 'ATA' (string) linux.hotplug_type = 3 (0x3) (int) linux.sysfs_path = '/sys/block/sda' (string) storage.automount_enabled_hint = false (bool) storage.bus = 'scsi' (string) storage.drive_type = 'disk' (string) storage.firmware_version = '3.00' (string) storage.hotpluggable = false (bool) storage.lun = 0 (0x0) (int) storage.media_check_enabled = false (bool) storage.model = 'ST3160023AS' (string) storage.no_partitions_hint = false (bool) storage.originating_device = '/org/freedesktop/Hal/devices/computer' (string) storage.partitioning_scheme = 'mbr' (string) storage.removable = false (bool) storage.removable.media_available = true (bool) storage.removable.media_size = 160041885696 (0x25433d6000) (uint64) storage.requires_eject = false (bool) storage.serial = '1ATA_ST3160023AS_4LJ2YFL5' (string) storage.size = 160041885696 (0x25433d6000) (uint64) storage.vendor = 'ATA' (string) udi = '/org/freedesktop/Hal/devices/volume_uuid_44aaf0d3_888f_4737_b9d8_0ba550757b1d' block.device = '/dev/sda5' (string) block.is_volume = true (bool) block.major = 8 (0x8) (int) block.minor = 5 (0x5) (int) block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_1ATA_ST3160023AS_4LJ2YFL5' (string) info.capabilities = {'volume', 'block'} (string list) info.category = 'volume' (string) info.parent = '/org/freedesktop/Hal/devices/storage_serial_1ATA_ST3160023AS_4LJ2YFL5' (string) info.product = 'Volume (swap)' (string) info.udi = '/org/freedesktop/Hal/devices/volume_uuid_44aaf0d3_888f_4737_b9d8_0ba550757b1d' (string) linux.hotplug_type = 3 (0x3) (int) linux.sysfs_path = '/sys/block/sda/sda5' (string) storage.model = '' (string) volume.block_size = 512 (0x200) (int) volume.fstype = 'swap' (string) volume.fsusage = 'other' (string) volume.fsversion = '2' (string) volume.is_disc = false (bool) volume.is_mounted = false (bool) volume.is_mounted_read_only = false (bool) volume.is_partition = true (bool) volume.label = '' (string) volume.linux.is_device_mapper = false (bool) volume.mount_point = '' (string) volume.num_blocks = 6056442 (0x5c69fa) (int) volume.partition.media_size = 160041885696 (0x25433d6000) (uint64) volume.partition.number = 5 (0x5) (int) volume.partition.start = 156938374656 (0x248a418e00) (uint64) volume.size = 3100898304 (0xb8d3f400) (uint64) volume.uuid = '44aaf0d3-888f-4737-b9d8-0ba550757b1d' (string) udi = '/org/freedesktop/Hal/devices/volume_part2_size_1024' block.device = '/dev/sda2' (string) block.is_volume = true (bool) block.major = 8 (0x8) (int) block.minor = 2 (0x2) (int) block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_1ATA_ST3160023AS_4LJ2YFL5' (string) info.capabilities = {'volume', 'block'} (string list) info.category = 'volume' (string) info.parent = '/org/freedesktop/Hal/devices/storage_serial_1ATA_ST3160023AS_4LJ2YFL5' (string) info.product = 'Volume' (string) info.udi = '/org/freedesktop/Hal/devices/volume_part2_size_1024' (string) linux.hotplug_type = 3 (0x3) (int) linux.sysfs_path = '/sys/block/sda/sda2' (string) storage.model = '' (string) volume.block_size = 512 (0x200) (int) volume.fstype = '' (string) volume.fsusage = '' (string) volume.fsversion = '' (string) volume.is_disc = false (bool) volume.is_mounted = false (bool) volume.is_mounted_read_only = false (bool) volume.is_partition = true (bool) volume.label = '' (string) volume.linux.is_device_mapper = false (bool) volume.mount_point = '' (string) volume.num_blocks = 2 (0x2) (int) volume.partition.media_size = 160041885696 (0x25433d6000) (uint64) volume.partition.number = 2 (0x2) (int) volume.partition.start = 156938342400 (0x248a411000) (uint64) volume.size = 1024 (0x400) (uint64) volume.uuid = '' (string) udi = '/org/freedesktop/Hal/devices/volume_uuid_97628c47_c97d_4ceb_b080_a5002ef80f8c' block.device = '/dev/sda1' (string) block.is_volume = true (bool) block.major = 8 (0x8) (int) block.minor = 1 (0x1) (int) block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_1ATA_ST3160023AS_4LJ2YFL5' (string) info.capabilities = {'volume', 'block'} (string list) info.category = 'volume' (string) info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list) info.parent = '/org/freedesktop/Hal/devices/storage_serial_1ATA_ST3160023AS_4LJ2YFL5' (string) info.product = 'Volume (ext3)' (string) info.udi = '/org/freedesktop/Hal/devices/volume_uuid_97628c47_c97d_4ceb_b080_a5002ef80f8c' (string) linux.hotplug_type = 3 (0x3) (int) linux.sysfs_path = '/sys/block/sda/sda1' (string) org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list) org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list) org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list) org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list) storage.model = '' (string) volume.block_size = 512 (0x200) (int) volume.fstype = 'ext3' (string) volume.fsusage = 'filesystem' (string) volume.fsversion = '1.0' (string) volume.ignore = false (bool) volume.is_disc = false (bool) volume.is_mounted = true (bool) volume.is_mounted_read_only = false (bool) volume.is_partition = true (bool) volume.label = '' (string) volume.linux.is_device_mapper = false (bool) volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'acl', 'user_xattr', 'data='} (string list) volume.mount_point = '/' (string) volume.num_blocks = 306520137 (0x12452049) (int) volume.partition.flags = {'boot'} (string list) volume.partition.label = '' (string) volume.partition.media_size = 160041885696 (0x25433d6000) (uint64) volume.partition.number = 1 (0x1) (int) volume.partition.scheme = 'mbr' (string) volume.partition.start = 32256 (0x7e00) (uint64) volume.partition.type = '0x83' (string) volume.partition.uuid = '' (string) volume.size = 156938310144 (0x248a409200) (uint64) volume.unmount.valid_options = {'lazy'} (string list) volume.uuid = '97628c47-c97d-4ceb-b080-a5002ef80f8c' (string) udi = '/org/freedesktop/Hal/devices/pci_8086_2651_scsi_host_scsi_device_lun0_scsi_generic' info.capabilities = {'scsi_generic'} (string list) info.category = 'scsi_generic' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_2651_scsi_host_scsi_device_lun0' (string) info.product = 'SCSI Generic Interface' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_2651_scsi_host_scsi_device_lun0_scsi_generic' (string) linux.device_file = '/dev/sg0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_generic' (string) linux.sysfs_path = '/sys/class/scsi_generic/sg0' (string) scsi_generic.device = '/dev/sg0' (string) udi = '/org/freedesktop/Hal/devices/pci_8086_2640' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = '82801FB/FR (ICH6/ICH6R) LPC Interface Bridge' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_2640' (string) info.vendor = 'Intel Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.0' (string) pci.device_class = 6 (0x6) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 1 (0x1) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.0' (string) pci.product = '82801FB/FR (ICH6/ICH6R) LPC Interface Bridge' (string) pci.product_id = 9792 (0x2640) (int) pci.subsys_product_id = 0 (0x0) (int) pci.subsys_vendor_id = 0 (0x0) (int) pci.vendor = 'Intel Corporation' (string) pci.vendor_id = 32902 (0x8086) (int) udi = '/org/freedesktop/Hal/devices/pci_8086_244e' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = '82801 PCI Bridge' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_244e' (string) info.vendor = 'Intel Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0' (string) pci.device_class = 6 (0x6) (int) pci.device_protocol = 1 (0x1) (int) pci.device_subclass = 4 (0x4) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0' (string) pci.product = '82801 PCI Bridge' (string) pci.product_id = 9294 (0x244e) (int) pci.subsys_product_id = 0 (0x0) (int) pci.subsys_vendor_id = 0 (0x0) (int) pci.vendor = 'Intel Corporation' (string) pci.vendor_id = 32902 (0x8086) (int) udi = '/org/freedesktop/Hal/devices/pci_104c_8024' info.linux.driver = 'ohci1394' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_244e' (string) info.product = 'TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link)' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_104c_8024' (string) info.vendor = 'Texas Instruments' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:07.0' (string) pci.device_class = 12 (0xc) (int) pci.device_protocol = 16 (0x10) (int) pci.device_subclass = 0 (0x0) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:07.0' (string) pci.product = 'TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link)' (string) pci.product_id = 32804 (0x8024) (int) pci.subsys_product_id = 57361 (0xe011) (int) pci.subsys_vendor_id = 5681 (0x1631) (int) pci.vendor = 'Texas Instruments' (string) pci.vendor_id = 4172 (0x104c) (int) udi = '/org/freedesktop/Hal/devices/pci_10ec_8139' info.linux.driver = '8139too' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_244e' (string) info.product = 'RTL-8139/8139C/8139C+' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_10ec_8139' (string) info.vendor = 'Realtek Semiconductor Co., Ltd.' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:05.0' (string) pci.device_class = 2 (0x2) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 0 (0x0) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:05.0' (string) pci.product = 'RTL-8139/8139C/8139C+' (string) pci.product_id = 33081 (0x8139) (int) pci.subsys_product_id = 57361 (0xe011) (int) pci.subsys_vendor_id = 5681 (0x1631) (int) pci.vendor = 'Realtek Semiconductor Co., Ltd.' (string) pci.vendor_id = 4332 (0x10ec) (int) udi = '/org/freedesktop/Hal/devices/net_00_14_85_69_cb_34' info.capabilities = {'net', 'net.80203', 'wake_on_lan'} (string list) info.category = 'net.80203' (string) info.interfaces = {'org.freedesktop.Hal.Device.WakeOnLan'} (string list) info.parent = '/org/freedesktop/Hal/devices/pci_10ec_8139' (string) info.product = 'Networking Interface' (string) info.udi = '/org/freedesktop/Hal/devices/net_00_14_85_69_cb_34' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'net' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:05.0/net/eth0' (string) net.80203.mac_address = 88137648948 (0x148569cb34) (uint64) net.address = '00:14:85:69:cb:34' (string) net.arp_proto_hw_id = 1 (0x1) (int) net.interface = 'eth0' (string) net.linux.ifindex = 2 (0x2) (int) net.originating_device = '/org/freedesktop/Hal/devices/pci_10ec_8139' (string) net.physical_device = '/org/freedesktop/Hal/devices/pci_10ec_8139' (string) org.freedesktop.Hal.Device.WakeOnLan.method_argnames = {'', '', 'enable'} (string list) org.freedesktop.Hal.Device.WakeOnLan.method_execpaths = {'hal-system-wol-supported', 'hal-system-wol-enabled', 'hal-system-wol-enable'} (string list) org.freedesktop.Hal.Device.WakeOnLan.method_names = {'GetSupported', 'GetEnabled', 'SetEnabled'} (string list) org.freedesktop.Hal.Device.WakeOnLan.method_signatures = {'', '', 'b'} (string list) udi = '/org/freedesktop/Hal/devices/pci_163c_3052' info.linux.driver = 'serial' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_244e' (string) info.product = 'SmartLink SmartPCI562 56K Modem' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_163c_3052' (string) info.vendor = 'Smart Link Ltd.' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:01.0' (string) pci.device_class = 7 (0x7) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 3 (0x3) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:01.0' (string) pci.product = 'SmartLink SmartPCI562 56K Modem' (string) pci.product_id = 12370 (0x3052) (int) pci.subsys_product_id = 12370 (0x3052) (int) pci.subsys_vendor = 'Aztech System Ltd' (string) pci.subsys_vendor_id = 4653 (0x122d) (int) pci.vendor = 'Smart Link Ltd.' (string) pci.vendor_id = 5692 (0x163c) (int) udi = '/org/freedesktop/Hal/devices/pci_163c_3052_serial_platform_3' info.capabilities = {'serial'} (string list) info.category = 'serial' (string) info.parent = '/org/freedesktop/Hal/devices/pci_163c_3052' (string) info.product = 'SmartLink SmartPCI562 56K Modem' (string) info.udi = '/org/freedesktop/Hal/devices/pci_163c_3052_serial_platform_3' (string) linux.device_file = '/dev/ttyS3' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'tty' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:01.0/tty/ttyS3' (string) serial.device = '/dev/ttyS3' (string) serial.originating_device = '/org/freedesktop/Hal/devices/pci_163c_3052' (string) serial.port = 3 (0x3) (int) serial.type = 'platform' (string) udi = '/org/freedesktop/Hal/devices/pci_163c_3052_serial_platform_2' info.capabilities = {'serial'} (string list) info.category = 'serial' (string) info.parent = '/org/freedesktop/Hal/devices/pci_163c_3052' (string) info.product = 'SmartLink SmartPCI562 56K Modem' (string) info.udi = '/org/freedesktop/Hal/devices/pci_163c_3052_serial_platform_2' (string) linux.device_file = '/dev/ttyS2' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'tty' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:01.0/tty/ttyS2' (string) serial.device = '/dev/ttyS2' (string) serial.originating_device = '/org/freedesktop/Hal/devices/pci_163c_3052' (string) serial.port = 2 (0x2) (int) serial.type = 'platform' (string) udi = '/org/freedesktop/Hal/devices/pci_8086_265c' info.linux.driver = 'ehci_hcd' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = '82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_265c' (string) info.vendor = 'Intel Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7' (string) pci.device_class = 12 (0xc) (int) pci.device_protocol = 32 (0x20) (int) pci.device_subclass = 3 (0x3) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7' (string) pci.product = '82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller' (string) pci.product_id = 9820 (0x265c) (int) pci.subsys_product_id = 57361 (0xe011) (int) pci.subsys_vendor_id = 5681 (0x1631) (int) pci.vendor = 'Intel Corporation' (string) pci.vendor_id = 32902 (0x8086) (int) udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_7' info.bus = 'usb_device' (string) info.linux.driver = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_265c' (string) info.product = 'EHCI Host Controller' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_7' (string) info.vendor = 'Linux 2.6.24-19-generic ehci_hcd' (string) linux.device_file = '/dev/bus/usb/005/001' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb5' (string) usb_device.bus_number = 5 (0x5) (int) usb_device.can_wake_up = true (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 9 (0x9) (int) usb_device.device_protocol = 1 (0x1) (int) usb_device.device_revision_bcd = 518 (0x206) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.is_self_powered = true (bool) usb_device.linux.device_number = 1 (0x1) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb5' (string) usb_device.max_power = 0 (0x0) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.num_ports = 8 (0x8) (int) usb_device.product = 'EHCI Host Controller' (string) usb_device.product_id = 0 (0x0) (int) usb_device.serial = '0000:00:1d.7' (string) usb_device.speed = 480.0 (480) (double) usb_device.speed_bcd = 294912 (0x48000) (int) usb_device.vendor = 'Linux 2.6.24-19-generic ehci_hcd' (string) usb_device.vendor_id = 0 (0x0) (int) usb_device.version = 2.0 (2) (double) usb_device.version_bcd = 512 (0x200) (int) udi = '/org/freedesktop/Hal/devices/usb_device_fce_da_3553530216230810' info.bus = 'usb_device' (string) info.linux.driver = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_7' (string) info.product = 'W980' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_fce_da_3553530216230810' (string) info.vendor = 'Sony Ericsson Mobile Communications AB' (string) linux.device_file = '/dev/bus/usb/005/005' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb5/5-4' (string) usb_device.bus_number = 5 (0x5) (int) usb_device.can_wake_up = false (bool) usb_device.configuration = 'MTP Device' (string) usb_device.configuration_value = 4 (0x4) (int) usb_device.device_class = 0 (0x0) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.device_revision_bcd = 0 (0x0) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.is_self_powered = false (bool) usb_device.linux.device_number = 5 (0x5) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb5/5-4' (string) usb_device.max_power = 500 (0x1f4) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.num_ports = 0 (0x0) (int) usb_device.product = 'W980' (string) usb_device.product_id = 218 (0xda) (int) usb_device.serial = '3553530216230810' (string) usb_device.speed = 480.0 (480) (double) usb_device.speed_bcd = 294912 (0x48000) (int) usb_device.vendor = 'Sony Ericsson Mobile Communications AB' (string) usb_device.vendor_id = 4046 (0xfce) (int) usb_device.version = 2.0 (2) (double) usb_device.version_bcd = 512 (0x200) (int) udi = '/org/freedesktop/Hal/devices/usb_device_fce_da_3553530216230810_if0' access_control.file = '/dev/bus/usb/005/005' (string) access_control.type = 'camera' (string) camera.access_method = 'ptp' (string) camera.libgphoto2.name = 'USB PTP Class Camera' (string) camera.libgphoto2.support = true (bool) info.bus = 'usb' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'camera', 'camera', 'access_control'} (string list) info.category = 'camera' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_fce_da_3553530216230810' (string) info.product = 'USB Imaging Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_fce_da_3553530216230810_if0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb5/5-4/5-4:4.0' (string) usb.bus_number = 5 (0x5) (int) usb.can_wake_up = false (bool) usb.configuration = 'MTP Device' (string) usb.configuration_value = 4 (0x4) (int) usb.device_class = 0 (0x0) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 0 (0x0) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 6 (0x6) (int) usb.interface.description = 'Sony Ericsson W980' (string) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 1 (0x1) (int) usb.interface.subclass = 1 (0x1) (int) usb.is_self_powered = false (bool) usb.linux.device_number = 5 (0x5) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb5/5-4/5-4:4.0' (string) usb.max_power = 500 (0x1f4) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.num_ports = 0 (0x0) (int) usb.product = 'USB Imaging Interface' (string) usb.product_id = 218 (0xda) (int) usb.serial = '3553530216230810' (string) usb.speed = 480.0 (480) (double) usb.speed_bcd = 294912 (0x48000) (int) usb.vendor = 'Sony Ericsson Mobile Communications AB' (string) usb.vendor_id = 4046 (0xfce) (int) usb.version = 2.0 (2) (double) usb.version_bcd = 512 (0x200) (int) udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_7_if0' info.bus = 'usb' (string) info.linux.driver = 'hub' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_7' (string) info.product = 'USB Hub Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_7_if0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb5/5-0:1.0' (string) usb.bus_number = 5 (0x5) (int) usb.can_wake_up = true (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 9 (0x9) (int) usb.device_protocol = 1 (0x1) (int) usb.device_revision_bcd = 518 (0x206) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 9 (0x9) (int) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 0 (0x0) (int) usb.is_self_powered = true (bool) usb.linux.device_number = 1 (0x1) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb5/5-0:1.0' (string) usb.max_power = 0 (0x0) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.num_ports = 8 (0x8) (int) usb.product = 'USB Hub Interface' (string) usb.product_id = 0 (0x0) (int) usb.serial = '0000:00:1d.7' (string) usb.speed = 480.0 (480) (double) usb.speed_bcd = 294912 (0x48000) (int) usb.vendor = 'Linux 2.6.24-19-generic ehci_hcd' (string) usb.vendor_id = 0 (0x0) (int) usb.version = 2.0 (2) (double) usb.version_bcd = 512 (0x200) (int) udi = '/org/freedesktop/Hal/devices/pci_8086_265b' info.linux.driver = 'uhci_hcd' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = '82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_265b' (string) info.vendor = 'Intel Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3' (string) pci.device_class = 12 (0xc) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 3 (0x3) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3' (string) pci.product = '82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4' (string) pci.product_id = 9819 (0x265b) (int) pci.subsys_product_id = 57361 (0xe011) (int) pci.subsys_vendor_id = 5681 (0x1631) (int) pci.vendor = 'Intel Corporation' (string) pci.vendor_id = 32902 (0x8086) (int) udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_3' info.bus = 'usb_device' (string) info.linux.driver = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_265b' (string) info.product = 'UHCI Host Controller' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_3' (string) info.vendor = 'Linux 2.6.24-19-generic uhci_hcd' (string) linux.device_file = '/dev/bus/usb/004/001' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb4' (string) usb_device.bus_number = 4 (0x4) (int) usb_device.can_wake_up = true (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 9 (0x9) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.device_revision_bcd = 518 (0x206) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.is_self_powered = true (bool) usb_device.linux.device_number = 1 (0x1) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb4' (string) usb_device.max_power = 0 (0x0) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.num_ports = 2 (0x2) (int) usb_device.product = 'UHCI Host Controller' (string) usb_device.product_id = 0 (0x0) (int) usb_device.serial = '0000:00:1d.3' (string) usb_device.speed = 12.0 (12) (double) usb_device.speed_bcd = 4608 (0x1200) (int) usb_device.vendor = 'Linux 2.6.24-19-generic uhci_hcd' (string) usb_device.vendor_id = 0 (0x0) (int) usb_device.version = 1.1 (1.1) (double) usb_device.version_bcd = 272 (0x110) (int) udi = '/org/freedesktop/Hal/devices/usb_device_46d_929_noserial' info.bus = 'usb_device' (string) info.linux.driver = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_3' (string) info.product = 'Camera' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_46d_929_noserial' (string) info.vendor = 'Logitech, Inc.' (string) linux.device_file = '/dev/bus/usb/004/002' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb4/4-2' (string) usb_device.bus_number = 4 (0x4) (int) usb_device.can_wake_up = false (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 255 (0xff) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.device_revision_bcd = 0 (0x0) (int) usb_device.device_subclass = 255 (0xff) (int) usb_device.is_self_powered = false (bool) usb_device.linux.device_number = 2 (0x2) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb4/4-2' (string) usb_device.max_power = 100 (0x64) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.num_ports = 0 (0x0) (int) usb_device.product = 'Camera' (string) usb_device.product_id = 2345 (0x929) (int) usb_device.speed = 12.0 (12) (double) usb_device.speed_bcd = 4608 (0x1200) (int) usb_device.vendor = 'Logitech, Inc.' (string) usb_device.vendor_id = 1133 (0x46d) (int) usb_device.version = 1.1 (1.1) (double) usb_device.version_bcd = 272 (0x110) (int) udi = '/org/freedesktop/Hal/devices/usb_device_46d_929_noserial_video4linux' access_control.file = '/dev/video0' (string) access_control.type = 'video4linux' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'video4linux', 'video4linux.video_capture', 'access_control'} (string list) info.category = 'video4linux' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_46d_929_noserial' (string) info.product = 'Labtec Webcam Elch2 ' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_46d_929_noserial_video4linux' (string) linux.device_file = '/dev/video0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'video4linux' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb4/4-2/video4linux/video0' (string) video4linux.device = '/dev/video0' (string) video4linux.version = '1' (string) udi = '/org/freedesktop/Hal/devices/usb_device_46d_929_noserial_if0' info.bus = 'usb' (string) info.linux.driver = 'gspca' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_46d_929_noserial' (string) info.product = 'USB Vendor Specific Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_46d_929_noserial_if0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb4/4-2/4-2:1.0' (string) usb.bus_number = 4 (0x4) (int) usb.can_wake_up = false (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 255 (0xff) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 0 (0x0) (int) usb.device_subclass = 255 (0xff) (int) usb.interface.class = 255 (0xff) (int) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 0 (0x0) (int) usb.is_self_powered = false (bool) usb.linux.device_number = 2 (0x2) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb4/4-2/4-2:1.0' (string) usb.max_power = 100 (0x64) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.num_ports = 0 (0x0) (int) usb.product = 'USB Vendor Specific Interface' (string) usb.product_id = 2345 (0x929) (int) usb.speed = 12.0 (12) (double) usb.speed_bcd = 4608 (0x1200) (int) usb.vendor = 'Logitech, Inc.' (string) usb.vendor_id = 1133 (0x46d) (int) usb.version = 1.1 (1.1) (double) usb.version_bcd = 272 (0x110) (int) udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_3_if0' info.bus = 'usb' (string) info.linux.driver = 'hub' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_3' (string) info.product = 'USB Hub Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_3_if0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb4/4-0:1.0' (string) usb.bus_number = 4 (0x4) (int) usb.can_wake_up = true (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 9 (0x9) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 518 (0x206) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 9 (0x9) (int) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 0 (0x0) (int) usb.is_self_powered = true (bool) usb.linux.device_number = 1 (0x1) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb4/4-0:1.0' (string) usb.max_power = 0 (0x0) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.num_ports = 2 (0x2) (int) usb.product = 'USB Hub Interface' (string) usb.product_id = 0 (0x0) (int) usb.serial = '0000:00:1d.3' (string) usb.speed = 12.0 (12) (double) usb.speed_bcd = 4608 (0x1200) (int) usb.vendor = 'Linux 2.6.24-19-generic uhci_hcd' (string) usb.vendor_id = 0 (0x0) (int) usb.version = 1.1 (1.1) (double) usb.version_bcd = 272 (0x110) (int) udi = '/org/freedesktop/Hal/devices/pci_8086_265a' info.linux.driver = 'uhci_hcd' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = '82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_265a' (string) info.vendor = 'Intel Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2' (string) pci.device_class = 12 (0xc) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 3 (0x3) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2' (string) pci.product = '82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3' (string) pci.product_id = 9818 (0x265a) (int) pci.subsys_product_id = 57361 (0xe011) (int) pci.subsys_vendor_id = 5681 (0x1631) (int) pci.vendor = 'Intel Corporation' (string) pci.vendor_id = 32902 (0x8086) (int) udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_2' info.bus = 'usb_device' (string) info.linux.driver = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_265a' (string) info.product = 'UHCI Host Controller' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_2' (string) info.vendor = 'Linux 2.6.24-19-generic uhci_hcd' (string) linux.device_file = '/dev/bus/usb/003/001' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb3' (string) usb_device.bus_number = 3 (0x3) (int) usb_device.can_wake_up = true (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 9 (0x9) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.device_revision_bcd = 518 (0x206) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.is_self_powered = true (bool) usb_device.linux.device_number = 1 (0x1) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb3' (string) usb_device.max_power = 0 (0x0) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.num_ports = 2 (0x2) (int) usb_device.product = 'UHCI Host Controller' (string) usb_device.product_id = 0 (0x0) (int) usb_device.serial = '0000:00:1d.2' (string) usb_device.speed = 12.0 (12) (double) usb_device.speed_bcd = 4608 (0x1200) (int) usb_device.vendor = 'Linux 2.6.24-19-generic uhci_hcd' (string) usb_device.vendor_id = 0 (0x0) (int) usb_device.version = 1.1 (1.1) (double) usb_device.version_bcd = 272 (0x110) (int) udi = '/org/freedesktop/Hal/devices/usb_device_bb2_6098_000E9BEC4705' info.bus = 'usb_device' (string) info.linux.driver = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_2' (string) info.product = 'USB Cable Modem' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_bb2_6098_000E9BEC4705' (string) info.vendor = 'Ambit Microsystems Corp.' (string) linux.device_file = '/dev/bus/usb/003/002' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb3/3-1' (string) usb_device.bus_number = 3 (0x3) (int) usb_device.can_wake_up = false (bool) usb_device.configuration = 'USB Ethernet Configuration' (string) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 2 (0x2) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.device_revision_bcd = 257 (0x101) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.is_self_powered = true (bool) usb_device.linux.device_number = 2 (0x2) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb3/3-1' (string) usb_device.max_power = 0 (0x0) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 2 (0x2) (int) usb_device.num_ports = 0 (0x0) (int) usb_device.product = 'USB Cable Modem' (string) usb_device.product_id = 24728 (0x6098) (int) usb_device.serial = '000E9BEC4705' (string) usb_device.speed = 12.0 (12) (double) usb_device.speed_bcd = 4608 (0x1200) (int) usb_device.vendor = 'Ambit Microsystems Corp.' (string) usb_device.vendor_id = 2994 (0xbb2) (int) usb_device.version = 1.1 (1.1) (double) usb_device.version_bcd = 272 (0x110) (int) udi = '/org/freedesktop/Hal/devices/usb_device_bb2_6098_000E9BEC4705_if1' info.bus = 'usb' (string) info.linux.driver = 'cdc_ether' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_bb2_6098_000E9BEC4705' (string) info.product = 'USB Communications Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_bb2_6098_000E9BEC4705_if1' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb3/3-1/3-1:1.1' (string) usb.bus_number = 3 (0x3) (int) usb.can_wake_up = false (bool) usb.configuration = 'USB Ethernet Configuration' (string) usb.configuration_value = 1 (0x1) (int) usb.device_class = 2 (0x2) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 257 (0x101) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 2 (0x2) (int) usb.interface.number = 1 (0x1) (int) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 6 (0x6) (int) usb.is_self_powered = true (bool) usb.linux.device_number = 2 (0x2) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb3/3-1/3-1:1.1' (string) usb.max_power = 0 (0x0) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 2 (0x2) (int) usb.num_ports = 0 (0x0) (int) usb.product = 'USB Communications Interface' (string) usb.product_id = 24728 (0x6098) (int) usb.serial = '000E9BEC4705' (string) usb.speed = 12.0 (12) (double) usb.speed_bcd = 4608 (0x1200) (int) usb.vendor = 'Ambit Microsystems Corp.' (string) usb.vendor_id = 2994 (0xbb2) (int) usb.version = 1.1 (1.1) (double) usb.version_bcd = 272 (0x110) (int) udi = '/org/freedesktop/Hal/devices/net_00_0e_9b_ec_47_05' info.capabilities = {'net', 'net.80203', 'wake_on_lan'} (string list) info.category = 'net.80203' (string) info.interfaces = {'org.freedesktop.Hal.Device.WakeOnLan'} (string list) info.parent = '/org/freedesktop/Hal/devices/usb_device_bb2_6098_000E9BEC4705_if1' (string) info.product = 'Networking Interface' (string) info.udi = '/org/freedesktop/Hal/devices/net_00_0e_9b_ec_47_05' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'net' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb3/3-1/3-1:1.1/net/eth1' (string) net.80203.mac_address = 62745495301 (0xe9bec4705) (uint64) net.address = '00:0e:9b:ec:47:05' (string) net.arp_proto_hw_id = 1 (0x1) (int) net.interface = 'eth1' (string) net.linux.ifindex = 3 (0x3) (int) net.originating_device = '/org/freedesktop/Hal/devices/usb_device_bb2_6098_000E9BEC4705_if1' (string) net.physical_device = '/org/freedesktop/Hal/devices/usb_device_bb2_6098_000E9BEC4705_if1' (string) org.freedesktop.Hal.Device.WakeOnLan.method_argnames = {'', '', 'enable'} (string list) org.freedesktop.Hal.Device.WakeOnLan.method_execpaths = {'hal-system-wol-supported', 'hal-system-wol-enabled', 'hal-system-wol-enable'} (string list) org.freedesktop.Hal.Device.WakeOnLan.method_names = {'GetSupported', 'GetEnabled', 'SetEnabled'} (string list) org.freedesktop.Hal.Device.WakeOnLan.method_signatures = {'', '', 'b'} (string list) udi = '/org/freedesktop/Hal/devices/usb_device_bb2_6098_000E9BEC4705_if0' info.bus = 'usb' (string) info.linux.driver = 'cdc_ether' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_bb2_6098_000E9BEC4705' (string) info.product = 'USB Data Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_bb2_6098_000E9BEC4705_if0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb3/3-1/3-1:1.0' (string) usb.bus_number = 3 (0x3) (int) usb.can_wake_up = false (bool) usb.configuration = 'USB Ethernet Configuration' (string) usb.configuration_value = 1 (0x1) (int) usb.device_class = 2 (0x2) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 257 (0x101) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 10 (0xa) (int) usb.interface.description = 'Data Interface Class' (string) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 0 (0x0) (int) usb.is_self_powered = true (bool) usb.linux.device_number = 2 (0x2) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb3/3-1/3-1:1.0' (string) usb.max_power = 0 (0x0) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 2 (0x2) (int) usb.num_ports = 0 (0x0) (int) usb.product = 'USB Data Interface' (string) usb.product_id = 24728 (0x6098) (int) usb.serial = '000E9BEC4705' (string) usb.speed = 12.0 (12) (double) usb.speed_bcd = 4608 (0x1200) (int) usb.vendor = 'Ambit Microsystems Corp.' (string) usb.vendor_id = 2994 (0xbb2) (int) usb.version = 1.1 (1.1) (double) usb.version_bcd = 272 (0x110) (int) udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_2_if0' info.bus = 'usb' (string) info.linux.driver = 'hub' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_2' (string) info.product = 'USB Hub Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_2_if0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb3/3-0:1.0' (string) usb.bus_number = 3 (0x3) (int) usb.can_wake_up = true (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 9 (0x9) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 518 (0x206) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 9 (0x9) (int) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 0 (0x0) (int) usb.is_self_powered = true (bool) usb.linux.device_number = 1 (0x1) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb3/3-0:1.0' (string) usb.max_power = 0 (0x0) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.num_ports = 2 (0x2) (int) usb.product = 'USB Hub Interface' (string) usb.product_id = 0 (0x0) (int) usb.serial = '0000:00:1d.2' (string) usb.speed = 12.0 (12) (double) usb.speed_bcd = 4608 (0x1200) (int) usb.vendor = 'Linux 2.6.24-19-generic uhci_hcd' (string) usb.vendor_id = 0 (0x0) (int) usb.version = 1.1 (1.1) (double) usb.version_bcd = 272 (0x110) (int) udi = '/org/freedesktop/Hal/devices/pci_8086_2659' info.linux.driver = 'uhci_hcd' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = '82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_2659' (string) info.vendor = 'Intel Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1' (string) pci.device_class = 12 (0xc) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 3 (0x3) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1' (string) pci.product = '82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2' (string) pci.product_id = 9817 (0x2659) (int) pci.subsys_product_id = 57361 (0xe011) (int) pci.subsys_vendor_id = 5681 (0x1631) (int) pci.vendor = 'Intel Corporation' (string) pci.vendor_id = 32902 (0x8086) (int) udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_1' info.bus = 'usb_device' (string) info.linux.driver = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_2659' (string) info.product = 'UHCI Host Controller' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_1' (string) info.vendor = 'Linux 2.6.24-19-generic uhci_hcd' (string) linux.device_file = '/dev/bus/usb/002/001' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb2' (string) usb_device.bus_number = 2 (0x2) (int) usb_device.can_wake_up = true (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 9 (0x9) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.device_revision_bcd = 518 (0x206) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.is_self_powered = true (bool) usb_device.linux.device_number = 1 (0x1) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb2' (string) usb_device.max_power = 0 (0x0) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.num_ports = 2 (0x2) (int) usb_device.product = 'UHCI Host Controller' (string) usb_device.product_id = 0 (0x0) (int) usb_device.serial = '0000:00:1d.1' (string) usb_device.speed = 12.0 (12) (double) usb_device.speed_bcd = 4608 (0x1200) (int) usb_device.vendor = 'Linux 2.6.24-19-generic uhci_hcd' (string) usb_device.vendor_id = 0 (0x0) (int) usb_device.version = 1.1 (1.1) (double) usb_device.version_bcd = 272 (0x110) (int) udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_1_if0' info.bus = 'usb' (string) info.linux.driver = 'hub' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_1' (string) info.product = 'USB Hub Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_1_if0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb2/2-0:1.0' (string) usb.bus_number = 2 (0x2) (int) usb.can_wake_up = true (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 9 (0x9) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 518 (0x206) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 9 (0x9) (int) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 0 (0x0) (int) usb.is_self_powered = true (bool) usb.linux.device_number = 1 (0x1) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb2/2-0:1.0' (string) usb.max_power = 0 (0x0) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.num_ports = 2 (0x2) (int) usb.product = 'USB Hub Interface' (string) usb.product_id = 0 (0x0) (int) usb.serial = '0000:00:1d.1' (string) usb.speed = 12.0 (12) (double) usb.speed_bcd = 4608 (0x1200) (int) usb.vendor = 'Linux 2.6.24-19-generic uhci_hcd' (string) usb.vendor_id = 0 (0x0) (int) usb.version = 1.1 (1.1) (double) usb.version_bcd = 272 (0x110) (int) udi = '/org/freedesktop/Hal/devices/pci_8086_2658' info.linux.driver = 'uhci_hcd' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = '82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_2658' (string) info.vendor = 'Intel Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0' (string) pci.device_class = 12 (0xc) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 3 (0x3) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0' (string) pci.product = '82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1' (string) pci.product_id = 9816 (0x2658) (int) pci.subsys_product_id = 57361 (0xe011) (int) pci.subsys_vendor_id = 5681 (0x1631) (int) pci.vendor = 'Intel Corporation' (string) pci.vendor_id = 32902 (0x8086) (int) udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_0' info.bus = 'usb_device' (string) info.linux.driver = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_2658' (string) info.product = 'UHCI Host Controller' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_0' (string) info.vendor = 'Linux 2.6.24-19-generic uhci_hcd' (string) linux.device_file = '/dev/bus/usb/001/001' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb1' (string) usb_device.bus_number = 1 (0x1) (int) usb_device.can_wake_up = true (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 9 (0x9) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.device_revision_bcd = 518 (0x206) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.is_self_powered = true (bool) usb_device.linux.device_number = 1 (0x1) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb1' (string) usb_device.max_power = 0 (0x0) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.num_ports = 2 (0x2) (int) usb_device.product = 'UHCI Host Controller' (string) usb_device.product_id = 0 (0x0) (int) usb_device.serial = '0000:00:1d.0' (string) usb_device.speed = 12.0 (12) (double) usb_device.speed_bcd = 4608 (0x1200) (int) usb_device.vendor = 'Linux 2.6.24-19-generic uhci_hcd' (string) usb_device.vendor_id = 0 (0x0) (int) usb_device.version = 1.1 (1.1) (double) usb_device.version_bcd = 272 (0x110) (int) udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_0_if0' info.bus = 'usb' (string) info.linux.driver = 'hub' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_0' (string) info.product = 'USB Hub Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_0_if0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-0:1.0' (string) usb.bus_number = 1 (0x1) (int) usb.can_wake_up = true (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 9 (0x9) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 518 (0x206) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 9 (0x9) (int) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 0 (0x0) (int) usb.is_self_powered = true (bool) usb.linux.device_number = 1 (0x1) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-0:1.0' (string) usb.max_power = 0 (0x0) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.num_ports = 2 (0x2) (int) usb.product = 'USB Hub Interface' (string) usb.product_id = 0 (0x0) (int) usb.serial = '0000:00:1d.0' (string) usb.speed = 12.0 (12) (double) usb.speed_bcd = 4608 (0x1200) (int) usb.vendor = 'Linux 2.6.24-19-generic uhci_hcd' (string) usb.vendor_id = 0 (0x0) (int) usb.version = 1.1 (1.1) (double) usb.version_bcd = 272 (0x110) (int) udi = '/org/freedesktop/Hal/devices/pci_8086_2668' info.linux.driver = 'HDA Intel' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = '82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_2668' (string) info.vendor = 'Intel Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0' (string) pci.device_class = 4 (0x4) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 3 (0x3) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0' (string) pci.product = '82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller' (string) pci.product_id = 9832 (0x2668) (int) pci.subsys_product_id = 57361 (0xe011) (int) pci.subsys_vendor_id = 5681 (0x1631) (int) pci.vendor = 'Intel Corporation' (string) pci.vendor_id = 32902 (0x8086) (int) udi = '/org/freedesktop/Hal/devices/pci_8086_2668_sound_card_0' info.capabilities = {'sound'} (string list) info.category = 'sound' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_2668' (string) info.product = 'HDA Intel Sound Card' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_2668_sound_card_0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0' (string) sound.card = 0 (0x0) (int) sound.card_id = 'HDA Intel' (string) sound.originating_device = '/org/freedesktop/Hal/devices/pci_8086_2668' (string) udi = '/org/freedesktop/Hal/devices/pci_8086_2668_sound_card_0_alsa_capture_2' access_control.file = '/dev/snd/pcmC0D2c' (string) access_control.type = 'sound' (string) alsa.card = 0 (0x0) (int) alsa.card_id = 'HDA Intel' (string) alsa.device = 2 (0x2) (int) alsa.device_file = '/dev/snd/pcmC0D2c' (string) alsa.device_id = 'ALC880 Analog' (string) alsa.originating_device = '/org/freedesktop/Hal/devices/pci_8086_2668_sound_card_0' (string) alsa.pcm_class = 'generic' (string) alsa.type = 'capture' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'alsa', 'access_control'} (string list) info.category = 'alsa' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_2668_sound_card_0' (string) info.product = 'ALC880 Analog ALSA Capture Device' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_2668_sound_card_0_alsa_capture_2' (string) linux.device_file = '/dev/snd/pcmC0D2c' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/pcmC0D2c' (string) udi = '/org/freedesktop/Hal/devices/pci_8086_2668_sound_card_0_alsa_playback_1' access_control.file = '/dev/snd/pcmC0D1p' (string) access_control.type = 'sound' (string) alsa.card = 0 (0x0) (int) alsa.card_id = 'HDA Intel' (string) alsa.device = 1 (0x1) (int) alsa.device_file = '/dev/snd/pcmC0D1p' (string) alsa.device_id = 'ALC880 Digital' (string) alsa.originating_device = '/org/freedesktop/Hal/devices/pci_8086_2668_sound_card_0' (string) alsa.pcm_class = 'generic' (string) alsa.type = 'playback' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'alsa', 'access_control'} (string list) info.category = 'alsa' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_2668_sound_card_0' (string) info.product = 'ALC880 Digital ALSA Playback Device' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_2668_sound_card_0_alsa_playback_1' (string) linux.device_file = '/dev/snd/pcmC0D1p' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/pcmC0D1p' (string) udi = '/org/freedesktop/Hal/devices/pci_8086_2668_sound_card_0_alsa_capture_1' access_control.file = '/dev/snd/pcmC0D1c' (string) access_control.type = 'sound' (string) alsa.card = 0 (0x0) (int) alsa.card_id = 'HDA Intel' (string) alsa.device = 1 (0x1) (int) alsa.device_file = '/dev/snd/pcmC0D1c' (string) alsa.device_id = 'ALC880 Digital' (string) alsa.originating_device = '/org/freedesktop/Hal/devices/pci_8086_2668_sound_card_0' (string) alsa.pcm_class = 'generic' (string) alsa.type = 'capture' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'alsa', 'access_control'} (string list) info.category = 'alsa' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_2668_sound_card_0' (string) info.product = 'ALC880 Digital ALSA Capture Device' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_2668_sound_card_0_alsa_capture_1' (string) linux.device_file = '/dev/snd/pcmC0D1c' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/pcmC0D1c' (string) udi = '/org/freedesktop/Hal/devices/pci_8086_2668_sound_card_0_alsa_playback_0' access_control.file = '/dev/snd/pcmC0D0p' (string) access_control.type = 'sound' (string) alsa.card = 0 (0x0) (int) alsa.card_id = 'HDA Intel' (string) alsa.device = 0 (0x0) (int) alsa.device_file = '/dev/snd/pcmC0D0p' (string) alsa.device_id = 'ALC880 Analog' (string) alsa.originating_device = '/org/freedesktop/Hal/devices/pci_8086_2668_sound_card_0' (string) alsa.pcm_class = 'generic' (string) alsa.type = 'playback' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'alsa', 'access_control'} (string list) info.category = 'alsa' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_2668_sound_card_0' (string) info.product = 'ALC880 Analog ALSA Playback Device' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_2668_sound_card_0_alsa_playback_0' (string) linux.device_file = '/dev/snd/pcmC0D0p' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/pcmC0D0p' (string) udi = '/org/freedesktop/Hal/devices/pci_8086_2668_sound_card_0_alsa_capture_0' access_control.file = '/dev/snd/pcmC0D0c' (string) access_control.type = 'sound' (string) alsa.card = 0 (0x0) (int) alsa.card_id = 'HDA Intel' (string) alsa.device = 0 (0x0) (int) alsa.device_file = '/dev/snd/pcmC0D0c' (string) alsa.device_id = 'ALC880 Analog' (string) alsa.originating_device = '/org/freedesktop/Hal/devices/pci_8086_2668_sound_card_0' (string) alsa.pcm_class = 'generic' (string) alsa.type = 'capture' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'alsa', 'access_control'} (string list) info.category = 'alsa' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_2668_sound_card_0' (string) info.product = 'ALC880 Analog ALSA Capture Device' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_2668_sound_card_0_alsa_capture_0' (string) linux.device_file = '/dev/snd/pcmC0D0c' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/pcmC0D0c' (string) udi = '/org/freedesktop/Hal/devices/pci_8086_2668_sound_card_0_oss_mixer__1' access_control.file = '/dev/mixer' (string) access_control.type = 'sound' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'oss', 'access_control'} (string list) info.category = 'oss' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_2668_sound_card_0' (string) info.product = 'ALC880 Analog OSS Control Device' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_2668_sound_card_0_oss_mixer__1' (string) linux.device_file = '/dev/mixer' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/mixer' (string) oss.card = 0 (0x0) (int) oss.card_id = 'HDA Intel' (string) oss.device_file = '/dev/mixer' (string) oss.device_id = 'ALC880 Analog' (string) oss.originating_device = '/org/freedesktop/Hal/devices/pci_8086_2668_sound_card_0' (string) oss.type = 'mixer' (string) udi = '/org/freedesktop/Hal/devices/pci_8086_2668_sound_card_0_alsa_hw_specific_2' access_control.file = '/dev/snd/hwC0D2' (string) access_control.type = 'sound' (string) alsa.card = 0 (0x0) (int) alsa.card_id = 'HDA Intel' (string) alsa.device = 2 (0x2) (int) alsa.device_file = '/dev/snd/hwC0D2' (string) alsa.originating_device = '/org/freedesktop/Hal/devices/pci_8086_2668_sound_card_0' (string) alsa.type = 'hw_specific' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'alsa', 'access_control'} (string list) info.category = 'alsa' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_2668_sound_card_0' (string) info.product = 'HDA Intel ALSA hardware specific Device' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_2668_sound_card_0_alsa_hw_specific_2' (string) linux.device_file = '/dev/snd/hwC0D2' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/hwC0D2' (string) udi = '/org/freedesktop/Hal/devices/pci_8086_2668_sound_card_0_oss_pcm_0_0' access_control.file = '/dev/dsp' (string) access_control.type = 'sound' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'oss', 'access_control'} (string list) info.category = 'oss' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_2668_sound_card_0' (string) info.product = 'ALC880 Analog OSS PCM Device' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_2668_sound_card_0_oss_pcm_0_0' (string) linux.device_file = '/dev/dsp' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/dsp' (string) oss.card = 0 (0x0) (int) oss.card_id = 'HDA Intel' (string) oss.device = 0 (0x0) (int) oss.device_file = '/dev/dsp' (string) oss.device_id = 'ALC880 Analog' (string) oss.originating_device = '/org/freedesktop/Hal/devices/pci_8086_2668_sound_card_0' (string) oss.type = 'pcm' (string) udi = '/org/freedesktop/Hal/devices/pci_8086_2668_sound_card_0_alsa_control__1' access_control.file = '/dev/snd/controlC0' (string) access_control.type = 'sound' (string) alsa.card = 0 (0x0) (int) alsa.card_id = 'HDA Intel' (string) alsa.device_file = '/dev/snd/controlC0' (string) alsa.originating_device = '/org/freedesktop/Hal/devices/pci_8086_2668_sound_card_0' (string) alsa.type = 'control' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'alsa', 'access_control'} (string list) info.category = 'alsa' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_2668_sound_card_0' (string) info.product = 'HDA Intel ALSA Control Device' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_2668_sound_card_0_alsa_control__1' (string) linux.device_file = '/dev/snd/controlC0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/controlC0' (string) udi = '/org/freedesktop/Hal/devices/pci_8086_2668_sound_card_0_oss_pcm_0' access_control.file = '/dev/audio' (string) access_control.type = 'sound' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'oss', 'access_control'} (string list) info.category = 'oss' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_2668_sound_card_0' (string) info.product = 'ALC880 Analog OSS PCM Device' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_2668_sound_card_0_oss_pcm_0' (string) linux.device_file = '/dev/audio' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/audio' (string) oss.card = 0 (0x0) (int) oss.card_id = 'HDA Intel' (string) oss.device = 0 (0x0) (int) oss.device_file = '/dev/audio' (string) oss.device_id = 'ALC880 Analog' (string) oss.originating_device = '/org/freedesktop/Hal/devices/pci_8086_2668_sound_card_0' (string) oss.type = 'pcm' (string) udi = '/org/freedesktop/Hal/devices/pci_8086_2668_sound_card_0_oss_pcm_1' access_control.file = '/dev/adsp' (string) access_control.type = 'sound' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'oss', 'access_control'} (string list) info.category = 'oss' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_2668_sound_card_0' (string) info.product = 'ALC880 Analog OSS PCM Device' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_2668_sound_card_0_oss_pcm_1' (string) linux.device_file = '/dev/adsp' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/adsp' (string) oss.card = 0 (0x0) (int) oss.card_id = 'HDA Intel' (string) oss.device = 1 (0x1) (int) oss.device_file = '/dev/adsp' (string) oss.device_id = 'ALC880 Analog' (string) oss.originating_device = '/org/freedesktop/Hal/devices/pci_8086_2668_sound_card_0' (string) oss.type = 'pcm' (string) udi = '/org/freedesktop/Hal/devices/pci_8086_2581' info.linux.driver = 'pcieport-driver' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = '82915G/P/GV/GL/PL/910GL PCI Express Root Port' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_2581' (string) info.vendor = 'Intel Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0' (string) pci.device_class = 6 (0x6) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 4 (0x4) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0' (string) pci.product = '82915G/P/GV/GL/PL/910GL PCI Express Root Port' (string) pci.product_id = 9601 (0x2581) (int) pci.subsys_product_id = 0 (0x0) (int) pci.subsys_vendor_id = 0 (0x0) (int) pci.vendor = 'Intel Corporation' (string) pci.vendor_id = 32902 (0x8086) (int) udi = '/org/freedesktop/Hal/devices/pci_10de_163' info.linux.driver = 'nvidia' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_2581' (string) info.product = 'NV44 [GeForce 6200 LE]' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_10de_163' (string) info.vendor = 'nVidia Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0' (string) pci.device_class = 3 (0x3) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 0 (0x0) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0' (string) pci.product = 'NV44 [GeForce 6200 LE]' (string) pci.product_id = 355 (0x163) (int) pci.subsys_product_id = 13312 (0x3400) (int) pci.subsys_vendor = 'Giga-byte Technology' (string) pci.subsys_vendor_id = 5208 (0x1458) (int) pci.vendor = 'nVidia Corporation' (string) pci.vendor_id = 4318 (0x10de) (int) udi = '/org/freedesktop/Hal/devices/pci_8086_2580' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = '82915G/P/GV/GL/PL/910GL Memory Controller Hub' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_2580' (string) info.vendor = 'Intel Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.0' (string) pci.device_class = 6 (0x6) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 0 (0x0) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.0' (string) pci.product = '82915G/P/GV/GL/PL/910GL Memory Controller Hub' (string) pci.product_id = 9600 (0x2580) (int) pci.subsys_product_id = 9600 (0x2580) (int) pci.subsys_vendor_id = 5681 (0x1631) (int) pci.vendor = 'Intel Corporation' (string) pci.vendor_id = 32902 (0x8086) (int) Dumped 99 device(s) from the Global Device List. ------------------------------------------------