[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.24-17-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Thu May 1 14:31:33 UTC 2008 (Ubuntu 2.6.24-17.31-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfe81400 (usable) [ 0.000000] BIOS-e820: 00000000cfe81400 - 00000000d0000000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4007000 (reserved) [ 0.000000] BIOS-e820: 00000000f4008000 - 00000000f400c000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) [ 0.000000] 2430MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] Entering add_active_range(0, 0, 851585) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 851585 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 851585 [ 0.000000] On node 0 totalpages: 851585 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 4861 pages used for memmap [ 0.000000] HighMem zone: 617348 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI 2.4 present. [ 0.000000] ACPI: RSDP signature @ 0xC00FC0C0 checksum 0 [ 0.000000] ACPI: RSDP 000FC0C0, 0014 (r0 DELL ) [ 0.000000] ACPI: RSDT CFE8198A, 0044 (r1 DELL M07 27D8010B ASL 61) [ 0.000000] ACPI: FACP CFE82800, 0074 (r1 DELL M07 27D8010B ASL 61) [ 0.000000] ACPI: DSDT CFE83400, 519E (r1 INT430 SYSFexxx 1001 INTL 20050624) [ 0.000000] ACPI: FACS CFE91C00, 0040 [ 0.000000] ACPI: HPET CFE82F00, 0038 (r1 DELL M07 1 ASL 61) [ 0.000000] ACPI: APIC CFE83000, 0068 (r1 DELL M07 27D8010B ASL 47) [ 0.000000] ACPI: ASF! CFE82C00, 005B (r16 DELL M07 27D8010B ASL 61) [ 0.000000] ACPI: MCFG CFE82FC0, 003E (r16 DELL M07 27D8010B ASL 61) [ 0.000000] ACPI: TCPA CFE83300, 0032 (r1 DELL M07 27D8010B ASL 61) [ 0.000000] ACPI: SLIC CFE8309C, 0176 (r1 DELL M07 27D8010B ASL 61) [ 0.000000] ACPI: SSDT CFE81A11, 04DC (r1 PmRef CpuPm 3000 INTL 20050624) [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:14 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 6:14 APIC version 20 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at d2000000 (gap: d0000000:20000000) [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 0000000000100000 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 844932 [ 0.000000] Kernel command line: root=UUID=08d74881-e7c0-4831-b9c9-1cb293e2c0e6 ro splash quiet [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 1997.422 MHz processor. [ 20.401131] Console: colour VGA+ 80x25 [ 20.401135] console [tty0] enabled [ 20.401384] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 20.401707] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 20.613443] Memory: 3366140k/3406340k available (2176k kernel code, 38892k reserved, 1007k data, 368k init, 2488836k highmem) [ 20.613450] virtual kernel memory layout: [ 20.613451] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB) [ 20.613453] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 20.613454] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 20.613455] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 20.613456] .init : 0xc0421000 - 0xc047d000 ( 368 kB) [ 20.613457] .data : 0xc0320134 - 0xc041bdc4 (1007 kB) [ 20.613458] .text : 0xc0100000 - 0xc0320134 (2176 kB) [ 20.613461] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 20.613500] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 20.613626] hpet clockevent registered [ 20.693523] Calibrating delay using timer specific routine.. 3997.99 BogoMIPS (lpj=7995996) [ 20.693544] Security Framework initialized [ 20.693551] SELinux: Disabled at boot. [ 20.693564] AppArmor: AppArmor initialized [ 20.693568] Failure registering capabilities with primary security module. [ 20.693575] Mount-cache hash table entries: 512 [ 20.693690] Initializing cgroup subsys ns [ 20.693696] Initializing cgroup subsys cpuacct [ 20.693705] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000 00000000 [ 20.693712] monitor/mwait feature present. [ 20.693713] using mwait in idle threads. [ 20.693717] CPU: L1 I cache: 32K, L1 D cache: 32K [ 20.693719] CPU: L2 cache: 2048K [ 20.693722] CPU: Physical Processor ID: 0 [ 20.693723] CPU: Processor Core ID: 0 [ 20.693725] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c1a9 00000000 00000000 00000000 [ 20.693734] Compat vDSO mapped to ffffe000. [ 20.693745] Checking 'hlt' instruction... OK. [ 20.709852] SMP alternatives: switching to UP code [ 20.711432] Early unpacking initramfs... done [ 21.012225] ACPI: Core revision 20070126 [ 21.012275] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 21.014924] CPU0: Intel Genuine Intel(R) CPU T2500 @ 2.00GHz stepping 08 [ 21.014940] SMP alternatives: switching to SMP code [ 21.015543] Booting processor 1/1 eip 3000 [ 23.334954] Initializing CPU#1 [ 23.411762] Calibrating delay using timer specific routine.. 3994.69 BogoMIPS (lpj=7989391) [ 23.411768] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000 00000000 [ 23.411773] monitor/mwait feature present. [ 23.411776] CPU: L1 I cache: 32K, L1 D cache: 32K [ 23.411778] CPU: L2 cache: 2048K [ 23.411780] CPU: Physical Processor ID: 0 [ 23.411781] CPU: Processor Core ID: 1 [ 23.411782] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c1a9 00000000 00000000 00000000 [ 21.105493] CPU1: Intel Genuine Intel(R) CPU T2500 @ 2.00GHz stepping 08 [ 21.105512] Total of 2 processors activated (7992.69 BogoMIPS). [ 21.105659] ENABLING IO-APIC IRQs [ 21.105829] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 21.252871] checking TSC synchronization [CPU#0 -> CPU#1]: [ 21.272853] Measured 4613593440 cycles TSC warp between CPUs, turning off TSC clock. [ 21.272856] Marking TSC unstable due to: check_tsc_sync_source failed. [ 21.272868] Brought up 2 CPUs [ 21.272892] CPU0 attaching sched-domain: [ 21.272894] domain 0: span 03 [ 21.272896] groups: 01 02 [ 21.272899] CPU1 attaching sched-domain: [ 21.272900] domain 0: span 03 [ 21.272902] groups: 02 01 [ 23.579926] net_namespace: 64 bytes [ 23.579935] Booting paravirtualized kernel on bare hardware [ 23.580329] Time: 18:35:52 Date: 05/04/08 [ 23.580354] NET: Registered protocol family 16 [ 23.580538] EISA bus registered [ 23.580543] ACPI: bus type pci registered [ 23.604549] PCI: PCI BIOS revision 2.10 entry at 0xfacc6, last bus=12 [ 23.604552] PCI: Using configuration type 1 [ 23.604553] Setting up standard PCI resources [ 21.303211] ACPI: EC: Look up EC in DSDT [ 21.317238] ACPI Warning (tbutils-0217): Incorrect checksum in table [TCPA] - 00, should be A3 [20070126] [ 21.317245] ACPI: SSDT CFE819CE, 0043 (r1 LMPWR DELLLOM 1001 INTL 20050624) [ 21.317383] ACPI: Interpreter enabled [ 21.317386] ACPI: (supports S0 S3 S4 S5) [ 21.317397] ACPI: Using IOAPIC for interrupt routing [ 21.350269] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 21.350815] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 21.350819] PCI quirk: region 1080-10bf claimed by ICH6 GPIO [ 21.351665] PCI: Transparent bridge - 0000:00:1e.0 [ 21.351736] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 21.352126] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 21.352212] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] [ 21.352344] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 21.352448] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 21.352550] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PXP0._PRT] [ 21.362555] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 11) *5 [ 21.362651] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *9 [ 21.362745] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 *11) [ 21.362828] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 11) *0, disabled. [ 21.362924] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 21.363020] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 21.363116] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 21.363212] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 21.363345] Linux Plug and Play Support v0.97 (c) Adam Belay [ 21.363377] pnp: PnP ACPI init [ 21.363384] ACPI: bus type pnp registered [ 21.378818] pnpacpi: exceeded the max number of mem resources: 12 [ 21.416901] pnp: PnP ACPI: found 15 devices [ 21.416903] ACPI: ACPI bus type pnp unregistered [ 21.416906] PnPBIOS: Disabled by ACPI PNP [ 23.723919] PCI: Using ACPI for IRQ routing [ 23.723921] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 23.779392] NET: Registered protocol family 8 [ 23.779394] NET: Registered protocol family 20 [ 23.779423] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 23.779427] hpet0: 3 64-bit timers, 14318180 Hz [ 23.780456] AppArmor: AppArmor Filesystem Enabled [ 21.476468] Time: hpet clocksource has been installed. [ 21.476482] Switched to high resolution mode on CPU 0 [ 23.783385] Switched to high resolution mode on CPU 1 [ 21.489445] system 00:00: iomem range 0x0-0x9fbff could not be reserved [ 21.489449] system 00:00: iomem range 0x9fc00-0x9ffff could not be reserved [ 21.489451] system 00:00: iomem range 0xc0000-0xcffff could not be reserved [ 21.489454] system 00:00: iomem range 0xe0000-0xfffff could not be reserved [ 21.489457] system 00:00: iomem range 0x100000-0xcfe813ff could not be reserved [ 21.489460] system 00:00: iomem range 0xcfe81400-0xcfefffff could not be reserved [ 21.489462] system 00:00: iomem range 0xcff00000-0xcfffffff could not be reserved [ 21.489465] system 00:00: iomem range 0xffb00000-0xffffffff could not be reserved [ 21.489468] system 00:00: iomem range 0xfec00000-0xfec0ffff could not be reserved [ 21.489471] system 00:00: iomem range 0xfee00000-0xfee0ffff could not be reserved [ 21.489474] system 00:00: iomem range 0xfed20000-0xfed3ffff could not be reserved [ 21.489477] system 00:00: iomem range 0xfed45000-0xfed9ffff could not be reserved [ 21.489483] system 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 21.489485] system 00:02: ioport range 0x1000-0x1005 has been reserved [ 21.489488] system 00:02: ioport range 0x1008-0x100f has been reserved [ 21.489493] system 00:03: ioport range 0xf400-0xf4fe has been reserved [ 21.489496] system 00:03: ioport range 0x1006-0x1007 has been reserved [ 21.489498] system 00:03: ioport range 0x100a-0x1059 could not be reserved [ 21.489501] system 00:03: ioport range 0x1060-0x107f has been reserved [ 21.489504] system 00:03: ioport range 0x1080-0x10bf has been reserved [ 21.489506] system 00:03: ioport range 0x10c0-0x10df has been reserved [ 21.489509] system 00:03: ioport range 0x1010-0x102f has been reserved [ 21.489511] system 00:03: ioport range 0x809-0x809 has been reserved [ 21.489518] system 00:08: ioport range 0xc80-0xcaf has been reserved [ 21.489521] system 00:08: ioport range 0xcc0-0xcff could not be reserved [ 21.489523] system 00:08: ioport range 0x910-0x91f has been reserved [ 21.489526] system 00:08: ioport range 0x920-0x92f has been reserved [ 21.489528] system 00:08: ioport range 0xcbc-0xcbf has been reserved [ 21.489531] system 00:08: ioport range 0x930-0x97f has been reserved [ 21.489537] system 00:0b: iomem range 0xfed00000-0xfed003ff has been reserved [ 21.489543] system 00:0e: ioport range 0xcb0-0xcbb has been reserved [ 21.489546] system 00:0e: iomem range 0xfed40000-0xfed44fff could not be reserved [ 21.519904] PCI: Bridge: 0000:00:01.0 [ 21.519906] IO window: disabled. [ 21.519909] MEM window: ed000000-efefffff [ 21.519912] PREFETCH window: d0000000-dfffffff [ 21.519915] PCI: Bridge: 0000:00:1c.0 [ 21.519917] IO window: disabled. [ 21.519921] MEM window: disabled. [ 21.519924] PREFETCH window: disabled. [ 21.519928] PCI: Bridge: 0000:00:1c.1 [ 21.519929] IO window: disabled. [ 21.519933] MEM window: ecf00000-ecffffff [ 21.519936] PREFETCH window: disabled. [ 21.519941] PCI: Bridge: 0000:00:1c.2 [ 21.519942] IO window: disabled. [ 21.519946] MEM window: ece00000-ecefffff [ 21.519949] PREFETCH window: disabled. [ 21.519959] PCI: Bus 4, cardbus bridge: 0000:03:01.0 [ 21.519961] IO window: 00001400-000014ff [ 21.519965] IO window: 00001800-000018ff [ 21.519969] PREFETCH window: e0000000-e3ffffff [ 21.519973] MEM window: e4000000-e7ffffff [ 21.519977] PCI: Bridge: 0000:00:1e.0 [ 21.519978] IO window: disabled. [ 21.519982] MEM window: disabled. [ 21.519985] PREFETCH window: disabled. [ 21.520000] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 21.520004] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 21.520019] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 21.520024] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 21.520040] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 21.520045] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 21.520061] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 21.520066] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 21.520075] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 21.520087] PCI: Enabling device 0000:03:01.0 (0000 -> 0003) [ 21.520091] ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 18 (level, low) -> IRQ 18 [ 21.520104] NET: Registered protocol family 2 [ 21.564359] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 21.564551] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 21.565173] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 21.565479] TCP: Hash tables configured (established 131072 bind 65536) [ 21.565481] TCP reno registered [ 21.576431] checking if image is initramfs... it is [ 22.171925] Freeing initrd memory: 7245k freed [ 22.172690] audit: initializing netlink socket (disabled) [ 22.172701] audit(1209926152.436:1): initialized [ 24.479750] highmem bounce pool size: 64 pages [ 24.481578] VFS: Disk quotas dquot_6.5.1 [ 22.174856] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 22.174975] io scheduler noop registered [ 22.174977] io scheduler anticipatory registered [ 22.174979] io scheduler deadline registered [ 22.174988] io scheduler cfq registered (default) [ 22.175079] Boot video device is 0000:01:00.0 [ 22.175174] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 22.175206] assign_interrupt_mode Found MSI capability [ 22.175232] Allocate Port Service[0000:00:01.0:pcie00] [ 22.175301] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 22.175338] assign_interrupt_mode Found MSI capability [ 22.175368] Allocate Port Service[0000:00:1c.0:pcie00] [ 22.175403] Allocate Port Service[0000:00:1c.0:pcie02] [ 22.175489] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 22.175526] assign_interrupt_mode Found MSI capability [ 22.175555] Allocate Port Service[0000:00:1c.1:pcie00] [ 22.175589] Allocate Port Service[0000:00:1c.1:pcie02] [ 22.175665] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 22.175702] assign_interrupt_mode Found MSI capability [ 22.175731] Allocate Port Service[0000:00:1c.2:pcie00] [ 22.175763] Allocate Port Service[0000:00:1c.2:pcie02] [ 22.175987] isapnp: Scanning for PnP cards... [ 22.529460] isapnp: No Plug & Play device found [ 22.554213] Real Time Clock Driver v1.12ac [ 22.554353] hpet_resources: 0xfed00000 is busy [ 22.554405] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 22.554522] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 22.554650] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 22.555214] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 22.555915] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 22.555979] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 22.556070] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 22.559090] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 22.559095] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 24.893785] mice: PS/2 mouse device common for all mice [ 24.893890] EISA: Probing bus 0 at eisa.0 [ 24.893893] EISA: Cannot allocate resource for mainboard [ 24.893896] Cannot allocate resource for EISA slot 1 [ 24.893918] EISA: Detected 0 cards. [ 24.893921] cpuidle: using governor ladder [ 24.893923] cpuidle: using governor menu [ 24.893999] NET: Registered protocol family 1 [ 24.894023] Using IPI No-Shortcut mode [ 24.894051] registered taskstats version 1 [ 24.894142] Magic number: 8:232:594 [ 24.894209] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 24.894211] EDD information not available. [ 24.894378] Freeing unused kernel memory: 368k freed [ 22.590288] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 23.780122] fuse init (API version 7.9) [ 23.802383] ACPI: SSDT CFE82138, 0244 (r1 PmRef Cpu0Ist 3000 INTL 20050624) [ 23.802554] ACPI: SSDT CFE81EED, 01C6 (r1 PmRef Cpu0Cst 3001 INTL 20050624) [ 23.803087] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 23.803091] ACPI: Processor [CPU0] (supports 8 throttling states) [ 23.803283] ACPI: SSDT CFE8237C, 00C4 (r1 PmRef Cpu1Ist 3000 INTL 20050624) [ 23.803440] ACPI: SSDT CFE820B3, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624) [ 26.110841] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 26.110846] ACPI: Processor [CPU1] (supports 8 throttling states) [ 26.114896] ACPI: Thermal Zone [THM] (55 C) [ 24.145495] usbcore: registered new interface driver usbfs [ 24.145517] usbcore: registered new interface driver hub [ 24.152754] usbcore: registered new device driver usb [ 24.156763] USB Universal Host Controller Interface driver v3.0 [ 24.156813] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 19 [ 24.156824] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 24.156828] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 24.157057] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 24.157085] uhci_hcd 0000:00:1d.0: irq 19, io base 0x0000bf80 [ 24.157202] usb usb1: configuration #1 chosen from 1 choice [ 24.157225] hub 1-0:1.0: USB hub found [ 24.157230] hub 1-0:1.0: 2 ports detected [ 24.217322] SCSI subsystem initialized [ 24.224059] libata version 3.00 loaded. [ 24.260667] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 20 [ 24.260679] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 24.260683] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 24.260704] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 24.260731] uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000bf60 [ 24.260829] usb usb2: configuration #1 chosen from 1 choice [ 24.260851] hub 2-0:1.0: USB hub found [ 24.260856] hub 2-0:1.0: 2 ports detected [ 24.364514] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 22 (level, low) -> IRQ 21 [ 24.364526] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 24.364530] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 24.364551] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 24.364578] uhci_hcd 0000:00:1d.2: irq 21, io base 0x0000bf40 [ 24.364676] usb usb3: configuration #1 chosen from 1 choice [ 24.364699] hub 3-0:1.0: USB hub found [ 24.364703] hub 3-0:1.0: 2 ports detected [ 24.468384] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 23 (level, low) -> IRQ 22 [ 24.468396] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 24.468400] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 24.468421] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 24.468448] uhci_hcd 0000:00:1d.3: irq 22, io base 0x0000bf20 [ 24.468548] usb usb4: configuration #1 chosen from 1 choice [ 24.468571] hub 4-0:1.0: USB hub found [ 24.468575] hub 4-0:1.0: 2 ports detected [ 24.500242] usb 1-2: new full speed USB device using uhci_hcd and address 2 [ 24.572320] tg3.c:v3.86 (November 9, 2007) [ 24.572348] ACPI: PCI Interrupt 0000:09:00.0[A] -> GSI 18 (level, low) -> IRQ 18 [ 24.572358] PCI: Setting latency timer of device 0000:09:00.0 to 64 [ 24.592825] eth0: Tigon3 [partno(BCM5752KFBG) rev 6002 PHY(5752)] (PCI Express) 10/100/1000Base-T Ethernet 00:15:c5:3d:0d:6f [ 24.592832] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1] [ 24.592835] eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 24.595925] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 19 [ 24.595935] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 24.595939] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 24.595964] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 24.599878] ehci_hcd 0000:00:1d.7: debug port 1 [ 24.599883] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 24.599889] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xffa80000 [ 24.624103] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 24.624205] usb usb5: configuration #1 chosen from 1 choice [ 24.624228] hub 5-0:1.0: USB hub found [ 24.624234] hub 5-0:1.0: 8 ports detected [ 24.728081] ata_piix 0000:00:1f.2: version 2.12 [ 24.728088] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] [ 24.728118] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17 [ 24.728150] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 24.728219] scsi0 : ata_piix [ 24.728260] scsi1 : ata_piix [ 24.729745] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xbfa0 irq 14 [ 24.729748] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xbfa8 irq 15 [ 24.941705] ata1.00: ATA-8: WDC WD3200BEVT-22ZCT0, 11.01A11, max UDMA/133 [ 24.941709] ata1.00: 625142448 sectors, multi 8: LBA48 NCQ (depth 0/32) [ 24.957520] ata1.00: configured for UDMA/133 [ 25.023529] usb 1-2: device not accepting address 2, error -71 [ 27.598294] ata2.00: ATAPI: TSSTcorp DVD+/-RW TS-L632D, DE03, max UDMA/33 [ 27.793959] ata2.00: configured for UDMA/33 [ 25.487303] scsi 0:0:0:0: Direct-Access ATA WDC WD3200BEVT-2 11.0 PQ: 0 ANSI: 5 [ 25.503528] scsi 1:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-L632D DE03 PQ: 0 ANSI: 5 [ 25.512070] Driver 'sd' needs updating - please use bus_type methods [ 25.512140] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) [ 25.512152] sd 0:0:0:0: [sda] Write Protect is off [ 25.512154] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 25.512170] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 25.512213] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) [ 25.512222] sd 0:0:0:0: [sda] Write Protect is off [ 25.512224] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 25.512239] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 25.512242] sda:<4>Driver 'sr' needs updating - please use bus_type methods [ 25.562163] sda1 < sda5 sda6 sda7 sda8 > sda2 sda3 [ 25.592919] sd 0:0:0:0: [sda] Attached SCSI disk [ 25.597016] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 25.597033] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 25.687098] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 25.687102] Uniform CD-ROM driver Revision: 3.20 [ 25.687151] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 28.178154] usb 1-2: new full speed USB device using uhci_hcd and address 4 [ 25.936251] Attempting manual resume [ 25.936254] swsusp: Resume From Partition 8:8 [ 25.936256] PM: Checking swsusp image. [ 25.936466] PM: Resume from disk failed. [ 28.250930] SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled [ 28.251349] SGI XFS Quota Management subsystem [ 25.967294] XFS mounting filesystem sda6 [ 26.023776] usb 1-2: configuration #1 chosen from 1 choice [ 26.026708] hub 1-2:1.0: USB hub found [ 28.335480] hub 1-2:1.0: 4 ports detected [ 26.042313] Starting XFS recovery on filesystem: sda6 (logdev: internal) [ 28.684432] usb 4-1: new low speed USB device using uhci_hcd and address 2 [ 26.559835] usb 4-1: configuration #1 chosen from 1 choice [ 26.786693] usb 1-2.3: new full speed USB device using uhci_hcd and address 5 [ 26.902623] usb 1-2.3: configuration #1 chosen from 1 choice [ 26.905572] hub 1-2.3:1.0: USB hub found [ 29.214329] hub 1-2.3:1.0: 3 ports detected [ 27.215810] Ending XFS recovery on filesystem: sda6 (logdev: internal) [ 27.234113] usb 1-2.4: new full speed USB device using uhci_hcd and address 6 [ 27.387003] usb 1-2.4: configuration #1 chosen from 1 choice [ 27.597636] usb 1-2.3.2: new full speed USB device using uhci_hcd and address 7 [ 27.719559] usb 1-2.3.2: configuration #1 chosen from 1 choice [ 30.032296] usbcore: registered new interface driver hiddev [ 27.740460] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.3/usb4/4-1/4-1:1.0/input/input2 [ 27.751771] input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.3-1 [ 27.751817] usbcore: registered new interface driver usbhid [ 27.751824] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 30.052543] usb 4-1: USB disconnect, address 2 [ 59.639191] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen [ 59.639238] ata1.00: cmd c8/00:08:78:94:52/00:00:00:00:00/e1 tag 0 dma 4096 in [ 59.639239] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 59.639279] ata1.00: status: { DRDY } [ 64.672140] ata1: port is slow to respond, please be patient (Status 0xd0) [ 69.649187] ata1: device not ready (errno=-16), forcing hardreset [ 69.649190] ata1: soft resetting link [ 70.193676] ata1.00: configured for UDMA/133 [ 70.193682] ata1: EH complete [ 72.517829] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) [ 72.517845] sd 0:0:0:0: [sda] Write Protect is off [ 72.517848] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 70.219824] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 81.602564] iTCO_vendor_support: vendor-support=0 [ 81.659568] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) [ 81.659646] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060) [ 81.659675] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 79.596328] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 79.629327] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 79.783638] Linux agpgart interface v0.102 [ 79.855367] intel_rng: FWH not detected [ 79.941250] ACPI: Battery Slot [BAT0] (battery present) [ 79.941298] ACPI: Battery Slot [BAT1] (battery absent) [ 79.975838] ACPI: AC Adapter [AC] (on-line) [ 82.309753] input: Lid Switch as /devices/virtual/input/input3 [ 82.323063] ACPI: Lid Switch [LID] [ 82.323112] input: Power Button (CM) as /devices/virtual/input/input4 [ 80.038735] input: PS/2 Mouse as /devices/virtual/input/input5 [ 80.076191] irda_init() [ 80.076210] NET: Registered protocol family 23 [ 82.386434] ACPI: Power Button (CM) [PBTN] [ 82.386492] input: Sleep Button (CM) as /devices/virtual/input/input6 [ 80.158836] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input7 [ 82.494280] ACPI: Sleep Button (CM) [SBTN] [ 80.187577] ACPI: WMI-Acer: Mapper loaded [ 80.201820] Yenta: CardBus bridge found at 0000:03:01.0 [1028:01c2] [ 80.201841] Yenta O2: res at 0x94/0xD4: 00/ea [ 80.201843] Yenta O2: enabling read prefetch/write burst [ 80.246488] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 80.299513] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:21/LNXVIDEO:00/input/input8 [ 80.327216] Yenta: ISA IRQ mask 0x0cb8, PCI irq 18 [ 80.327219] Socket status: 30000006 [ 80.327221] Yenta: Raising subordinate bus# of parent bus (#03) from #04 to #07 [ 80.338266] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 80.338807] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:01/input/input9 [ 80.402183] ACPI: Video Device [VID1] (multi-head: yes rom: no post: no) [ 80.402329] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:02/input/input10 [ 80.466117] ACPI: Video Device [VID2] (multi-head: yes rom: no post: no) [ 80.887385] Bluetooth: Core ver 2.11 [ 80.911049] nvidia: module license 'NVIDIA' taints kernel. [ 80.914499] NET: Registered protocol family 31 [ 80.914502] Bluetooth: HCI device and connection manager initialized [ 80.914506] Bluetooth: HCI socket layer initialized [ 81.216303] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 81.216312] PCI: Setting latency timer of device 0000:01:00.0 to 64 [ 81.216430] NVRM: loading NVIDIA UNIX x86 Kernel Module 169.12 Thu Feb 14 17:53:07 PST 2008 [ 81.324112] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.0 [ 81.324116] iwl3945: Copyright(c) 2003-2007 Intel Corporation [ 81.324250] ACPI: PCI Interrupt 0000:0c:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 81.324264] PCI: Setting latency timer of device 0000:0c:00.0 to 64 [ 81.324285] iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection [ 81.338485] Bluetooth: HCI USB driver ver 2.9 [ 81.340553] usbcore: registered new interface driver hci_usb [ 81.612544] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 20 [ 81.612566] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 82.003412] iwl3945: Tunable channels: 11 802.11bg, 13 802.11a channels [ 82.003749] wmaster0: Selected rate control algorithm 'iwl-3945-rs' [ 82.150527] cs: IO port probe 0x100-0x3af: excluding 0x280-0x287 [ 82.151742] cs: IO port probe 0x3e0-0x4ff: clean. [ 82.152246] cs: IO port probe 0x820-0x8ff: clean. [ 82.152677] cs: IO port probe 0xc00-0xcf7: clean. [ 82.153144] cs: IO port probe 0x1000-0x17ff: clean. [ 82.155525] cs: IO port probe 0xa00-0xaff: clean. [ 82.156052] cs: IO port probe 0x1800-0x18ff: clean. [ 82.326609] lp: driver loaded but no devices found [ 82.428024] Adding 4056372k swap on /dev/sda8. Priority:-1 extents:1 across:4056372k [ 85.626999] kjournald starting. Commit interval 5 seconds [ 83.320725] EXT3 FS on sda5, internal journal [ 83.320729] EXT3-fs: mounted filesystem with ordered data mode. [ 83.378578] XFS mounting filesystem sda2 [ 83.476838] Starting XFS recovery on filesystem: sda2 (logdev: internal) [ 83.785406] Ending XFS recovery on filesystem: sda2 (logdev: internal) [ 84.431082] XFS mounting filesystem sda7 [ 84.487649] Ending clean XFS mount for filesystem: sda7 [ 85.017574] ip_tables: (C) 2000-2006 Netfilter Core Team [ 87.050144] ACPI: ACPI Dock Station Driver [ 89.364426] ACPI: \_SB_.PCI0.IDE0.SEC0.MAST: found ejectable bay [ 89.364431] ACPI: \_SB_.PCI0.IDE0.SEC0.MAST: Adding notify handler [ 89.364461] ACPI: Error installing bay notify handler [ 89.364464] ACPI: Bay [\_SB_.PCI0.IDE0.SEC0.MAST] Added [ 90.895951] ppdev: user-space parallel port driver [ 89.076189] audit(1209926219.891:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5408 profile="/usr/sbin/cupsd" namespace="default" [ 96.455025] apm: BIOS not found. [ 97.560975] Bridge firewalling registered [ 97.561241] vnet0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature. [ 99.876279] vnet0: starting userspace STP failed, starting kernel STP [ 97.755344] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 98.047049] RPC: Registered udp transport module. [ 98.047053] RPC: Registered tcp transport module. [ 98.125781] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 98.183660] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 98.193106] NFSD: starting 90-second grace period [ 99.300163] NET: Registered protocol family 10 [ 99.300749] lo: Disabled Privacy Extensions [ 100.948846] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 103.319354] Bluetooth: L2CAP ver 2.9 [ 103.319362] Bluetooth: L2CAP socket layer initialized [ 101.020951] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 101.072682] Bluetooth: RFCOMM socket layer initialized [ 101.072701] Bluetooth: RFCOMM TTY layer initialized [ 101.072704] Bluetooth: RFCOMM ver 1.8 [ 109.921595] vnet0: no IPv6 routers present [ 155.541216] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen [ 155.541235] ata1.00: cmd c8/00:10:af:69:92/00:00:00:00:00/ea tag 0 dma 8192 in [ 155.541238] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 155.541244] ata1.00: status: { DRDY } [ 162.881315] ata1: port is slow to respond, please be patient (Status 0xd0) [ 167.858718] ata1: device not ready (errno=-16), forcing hardreset [ 167.858730] ata1: soft resetting link [ 166.084043] ata1.00: configured for UDMA/133 [ 166.084071] ata1: EH complete [ 166.103971] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) [ 166.104277] sd 0:0:0:0: [sda] Write Protect is off [ 166.104283] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 166.125950] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 205.880807] CPU0 attaching NULL sched-domain. [ 205.880818] CPU1 attaching NULL sched-domain. [ 205.893319] CPU0 attaching sched-domain: [ 205.893329] domain 0: span 03 [ 205.893333] groups: 01 02 [ 205.893338] CPU1 attaching sched-domain: [ 205.893344] domain 0: span 03 [ 205.893347] groups: 02 01 [ 208.584922] NET: Registered protocol family 17 [ 208.134870] wlan0: Initial auth_alg=0 [ 208.134880] wlan0: authenticate with AP 00:12:0e:80:33:42 [ 208.136114] wlan0: RX authentication from 00:12:0e:80:33:42 (alg=0 transaction=2 status=0) [ 208.136121] wlan0: authenticated [ 208.136125] wlan0: associate with AP 00:12:0e:80:33:42 [ 208.138574] wlan0: RX AssocResp from 00:12:0e:80:33:42 (capab=0x471 status=0 aid=1) [ 208.138582] wlan0: associated [ 208.138589] wlan0: CTS protection enabled (BSSID=00:12:0e:80:33:42) [ 208.142093] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 226.822719] wlan0: no IPv6 routers present [ 349.935599] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen [ 349.935618] ata1.00: cmd 25/00:00:af:17:a0/00:01:10:00:00/e0 tag 0 dma 131072 in [ 349.935621] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 349.935627] ata1.00: status: { DRDY } [ 357.275697] ata1: port is slow to respond, please be patient (Status 0xd0) [ 362.253100] ata1: device not ready (errno=-16), forcing hardreset [ 362.253111] ata1: soft resetting link [ 360.483591] ata1.00: configured for UDMA/133 [ 360.483617] ata1: EH complete [ 362.808377] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) [ 362.812114] sd 0:0:0:0: [sda] Write Protect is off [ 362.812123] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 362.846787] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 419.141719] usb 4-1: new low speed USB device using uhci_hcd and address 3 [ 417.016926] usb 4-1: configuration #1 chosen from 1 choice [ 419.344068] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.3/usb4/4-1/4-1:1.0/input/input11 [ 419.398385] input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.3-1