hardy - usb device doesn't auto-mount
| Affects | Status | Importance | Assigned to | Milestone | |
|---|---|---|---|---|---|
| Ubuntu |
New
|
Undecided
|
Unassigned | ||
Bug Description
Hello,
when I plug on hardy , sony NWZ-S618F, it's not mounted, and I can't access it.
It's work on gusty.
in dmesg :
[ 1012.070230] usb 7-4: new high speed USB device using ehci_hcd and address 3
[ 1012.094849] usb 7-4: configuration #1 chosen from 1 choice
[ 1012.217979] usbcore: registered new interface driver libusual
[ 1012.231435] Initializing USB Mass Storage driver...
[ 1012.232954] scsi5 : SCSI emulation for USB Mass Storage devices
[ 1012.234455] usbcore: registered new interface driver usb-storage
[ 1012.234461] USB Mass Storage support registered.
[ 1012.235430] usb-storage: device found at 3
[ 1012.235433] usb-storage: waiting for device to settle before scanning
[ 1012.701310] usb-storage: device scan complete
[ 1012.702397] scsi 5:0:0:0: Direct-Access SONY WALKMAN 1.00 PQ: 0 ANSI: 0 CCS
[ 1012.922544] ready
[ 1012.923038] sd 5:0:0:0: [sdb] 3829760 2048-byte hardware sectors (7843 MB)
[ 1012.924064] sd 5:0:0:0: [sdb] Write Protect is off
[ 1012.924071] sd 5:0:0:0: [sdb] Mode Sense: 00 2a 00 00
[ 1012.924075] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 1012.926845] sd 5:0:0:0: [sdb] 3829760 2048-byte hardware sectors (7843 MB)
[ 1012.962683] sd 5:0:0:0: [sdb] Write Protect is off
[ 1012.962691] sd 5:0:0:0: [sdb] Mode Sense: 00 2a 00 00
[ 1012.962695] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 1012.962702] sdb: sdb1
[ 1012.964152] sdb: p1 exceeds device capacity
[ 1012.964687] sd 5:0:0:0: [sdb] Attached SCSI removable disk
[ 1012.964755] sd 5:0:0:0: Attached scsi generic sg2 type 0
[ 1012.991540] attempt to access beyond end of device
[ 1012.991552] sdb: rw=0, want=4294967044, limit=15319040
[ 1012.991557] Buffer I/O error on device sdb1, logical block 1073741760
[ 1012.991564] attempt to access beyond end of device
[ 1012.991568] sdb: rw=0, want=4294967048, limit=15319040
[ 1012.991572] Buffer I/O error on device sdb1, logical block 1073741761
[ 1012.991577] attempt to access beyond end of device
[ 1012.991581] sdb: rw=0, want=4294967044, limit=15319040
[ 1012.991585] Buffer I/O error on device sdb1, logical block 1073741760
[ 1012.991589] attempt to access beyond end of device
[ 1012.991593] sdb: rw=0, want=4294967048, limit=15319040
[ 1012.991597] Buffer I/O error on device sdb1, logical block 1073741761
[ 1012.991614] attempt to access beyond end of device
[ 1012.991618] sdb: rw=0, want=4294967276, limit=15319040
[ 1012.991622] Buffer I/O error on device sdb1, logical block 1073741818
[ 1012.991627] attempt to access beyond end of device
[ 1012.991631] sdb: rw=0, want=4294967280, limit=15319040
[ 1012.991635] Buffer I/O error on device sdb1, logical block 1073741819
[ 1012.991640] attempt to access beyond end of device
[ 1012.991644] sdb: rw=0, want=4294967276, limit=15319040
[ 1012.991648] Buffer I/O error on device sdb1, logical block 1073741818
[ 1012.991653] attempt to access beyond end of device
[ 1012.991656] sdb: rw=0, want=4294967280, limit=15319040
[ 1012.991660] Buffer I/O error on device sdb1, logical block 1073741819
[ 1012.997938] attempt to access beyond end of device
[ 1012.997945] sdb: rw=0, want=4294967292, limit=15319040
[ 1012.997950] Buffer I/O error on device sdb1, logical block 1073741822
[ 1012.997957] attempt to access beyond end of device
[ 1012.997960] sdb: rw=0, want=4294967292, limit=15319040
[ 1012.997965] Buffer I/O error on device sdb1, logical block 1073741822
[ 1012.997977] attempt to access beyond end of device
[ 1012.997981] sdb: rw=0, want=4294967292, limit=15319040
[ 1012.997992] attempt to access beyond end of device
[ 1012.997996] sdb: rw=0, want=4294967292, limit=15319040
[ 1012.998006] attempt to access beyond end of device
[ 1012.998009] sdb: rw=0, want=4294967292, limit=15319040
[ 1012.998020] attempt to access beyond end of device
[ 1012.998024] sdb: rw=0, want=4294967292, limit=15319040
[ 1012.998034] attempt to access beyond end of device
[ 1012.998038] sdb: rw=0, want=4294967292, limit=15319040
[ 1012.998051] attempt to access beyond end of device
[ 1012.998055] sdb: rw=0, want=4294967228, limit=15319040
[ 1012.998059] attempt to access beyond end of device
[ 1012.998063] sdb: rw=0, want=4294967232, limit=15319040
[ 1012.998074] attempt to access beyond end of device
[ 1012.998079] sdb: rw=0, want=4294967284, limit=15319040
[ 1012.998083] attempt to access beyond end of device
[ 1012.998086] sdb: rw=0, want=4294967288, limit=15319040
[ 1012.998098] attempt to access beyond end of device
[ 1012.998102] sdb: rw=0, want=4294967292, limit=15319040
[ 1012.998112] attempt to access beyond end of device
[ 1012.998115] sdb: rw=0, want=4294967292, limit=15319040
lsusb :
laurent@
Bus 007 Device 003: ID 054c:0327 Sony Corp.
Bus 007 Device 001: ID 0000:0000
etc/fstab
laurent@
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
# /dev/sda3
UUID=a346f8c2-
# /dev/sda1
UUID=8EA07B28A0
# /dev/sda2
UUID=747E7EE17E
# /dev/sda5
UUID=4c6d303f-
/dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec 0 0
laurent@
ld
| ld (ld-dubois) wrote | #1 |
| Benjamin Delagoutte (benjamin-delagoutte) wrote | #2 |
| Benjamin Delagoutte (benjamin-delagoutte) wrote | #3 |
| dstoian (dstoian) wrote | #4 |
Hello,
another information,
I see in result of fdisk -l :
Périphérique Amorce Début Fin Blocs Id Système
/dev/sdb1 1 69273667 4294967294 ff BBT
La partition 1 ne se termine pas sur une frontière de cylindre.
Note: taille de secteur est 2048 (et non pas 512)
Disque /dev/sdb1: 2199.0 Go, 2199023253504 octets
1 heads, 62 sectors/track, 17318416 cylinders
Units = cylindres of 62 * 2048 = 126976 bytes
Identifiant disque: 0x00000000
where there is
:
Disque /dev/sdb1: 2199.0 Go,
my usb device is not a near 2To one, but only a 8Go
I suppose it can explain some message like
[ 1012.998079] sdb: rw=0, want=4294967284, limit=15319040
[ 1012.998083] attempt to access beyond end of device
ld