| 2022-10-13 17:32:52 |
Younis Amin |
description |
Setup details:
Kernel Version: 5.15.36--wwan-bkc-5
OS Version: Ubuntu 20.04.1 LTS
IOSM: IOSM_DRIVER_v8.06.13_5.15.36-wwan-bkc-5_2022_SEP01
MSDK_Version : MSDK_4G_ML_2022_SEP01_00
ModemManager Version (ModemManager -V) : 1.19.1
libMbim Version (mbimcli -V): 1.27.5
mmcli Version : 1.19.1
Modem Version: M2_7560_R_01.2236.00
Test Scenario :
1) Boot up RVP with Auto PDP enable -> Auto PDP enabled from UI
2) Registered to LTE Cell in good radio conditions
3) Start the ping
4) Change the Power level on simulator to bad radio conditions & make sure UE goes to OOS
5) Change the Power level to good conditions on simulator.
6) Check whether UE attaches to N/W & ping will resume
Observations:
1) After recovery from OOS data call is not resumed & UE stays in modemstate "8" only
Expected Result: After OOS recovery data call should resume.
>> From modem and modem manager we observed that host is not able to send the MBIM_CONNECT_CID to activate the connection. That is because Auto-connect was not successfully activated from the UI. |
Setup details:
Kernel Version: 5.15.36--wwan-bkc-5
OS Version: Ubuntu 20.04.1 LTS
IOSM: IOSM_DRIVER_v8.06.13_5.15.36-wwan-bkc-5_2022_SEP01
MSDK_Version : MSDK_4G_ML_2022_SEP01_00
ModemManager Version (ModemManager -V) : 1.19.1
libMbim Version (mbimcli -V): 1.27.5
mmcli Version : 1.19.1
Test Scenario :
1) Boot up RVP with Auto PDP enable -> Auto PDP enabled from UI
2) Registered to LTE Cell in good radio conditions
3) Start the ping
4) Change the Power level on simulator to bad radio conditions & make sure UE goes to OOS
5) Change the Power level to good conditions on simulator.
6) Check whether UE attaches to N/W & ping will resume
Observations:
1) After recovery from OOS data call is not resumed & UE stays in modemstate "8" only
Expected Result: After OOS recovery data call should resume.
>> From modem and modem manager we observed that host is not able to send the MBIM_CONNECT_CID to activate the connection. That is because Auto-connect was not successfully activated from the UI. |
|
