[ 0.000000] microcode: microcode updated early to revision 0x2f, date = 2019-11-12 [ 0.000000] Linux version 5.4.0-56-generic (buildd@lgw01-amd64-025) (gcc version 9.3.0 (Ubuntu 9.3.0-17ubuntu1~20.04)) #62-Ubuntu SMP Mon Nov 23 19:20:19 UTC 2020 (Ubuntu 5.4.0-56.62-generic 5.4.73) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.4.0-56-generic root=UUID=356b9ac9-6bdb-4fd6-83a5-5fcec346ace9 ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Hygon HygonGenuine [ 0.000000] Centaur CentaurHauls [ 0.000000] zhaoxin Shanghai [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009bfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009c000-0x000000000009cfff] reserved [ 0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009dfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000ca767fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000ca768000-0x00000000ccbfefff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ccbff000-0x00000000ccd7efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000ccd7f000-0x00000000ccdfefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000ccdff000-0x00000000ccdfffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000f80f8000-0x00000000f80f8fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000022dffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] e820: update [mem 0xc2554018-0xc2564057] usable ==> usable [ 0.000000] e820: update [mem 0xc2554018-0xc2564057] usable ==> usable [ 0.000000] extended physical RAM map: [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000009bfff] usable [ 0.000000] reserve setup_data: [mem 0x000000000009c000-0x000000000009cfff] reserved [ 0.000000] reserve setup_data: [mem 0x000000000009d000-0x000000000009dfff] usable [ 0.000000] reserve setup_data: [mem 0x000000000009e000-0x000000000009ffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x00000000c2554017] usable [ 0.000000] reserve setup_data: [mem 0x00000000c2554018-0x00000000c2564057] usable [ 0.000000] reserve setup_data: [mem 0x00000000c2564058-0x00000000ca767fff] usable [ 0.000000] reserve setup_data: [mem 0x00000000ca768000-0x00000000ccbfefff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000ccbff000-0x00000000ccd7efff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x00000000ccd7f000-0x00000000ccdfefff] ACPI data [ 0.000000] reserve setup_data: [mem 0x00000000ccdff000-0x00000000ccdfffff] usable [ 0.000000] reserve setup_data: [mem 0x00000000f80f8000-0x00000000f80f8fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000022dffffff] usable [ 0.000000] efi: EFI v2.31 by Lenovo [ 0.000000] efi: ACPI=0xccdfe000 ACPI 2.0=0xccdfe014 SMBIOS=0xccbfe000 ESRT=0xcaafc000 [ 0.000000] secureboot: Secure boot disabled [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: LENOVO 20CLS28G02/20CLS28G02, BIOS N10ET40W (1.19 ) 12/08/2015 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2294.772 MHz processor [ 0.000110] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000111] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000117] last_pfn = 0x22e000 max_arch_pfn = 0x400000000 [ 0.000121] MTRR default type: write-back [ 0.000122] MTRR fixed ranges enabled: [ 0.000123] 00000-9FFFF write-back [ 0.000124] A0000-BFFFF uncachable [ 0.000125] C0000-FFFFF write-protect [ 0.000125] MTRR variable ranges enabled: [ 0.000127] 0 base 00E0000000 mask 7FF0000000 uncachable [ 0.000128] 1 base 00D0000000 mask 7FF0000000 uncachable [ 0.000129] 2 base 00CE000000 mask 7FFE000000 uncachable [ 0.000130] 3 base 00CD000000 mask 7FFF000000 uncachable [ 0.000130] 4 base 00CCE00000 mask 7FFFE00000 uncachable [ 0.000131] 5 base 00F0000000 mask 7FF0000000 uncachable [ 0.000132] 6 disabled [ 0.000132] 7 disabled [ 0.000133] 8 disabled [ 0.000133] 9 disabled [ 0.000471] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000605] last_pfn = 0xcce00 max_arch_pfn = 0x400000000 [ 0.009880] esrt: Reserving ESRT space from 0x00000000caafc000 to 0x00000000caafc060. [ 0.009889] check: Scanning 1 areas for low memory corruption [ 0.009893] Using GB pages for direct mapping [ 0.010306] secureboot: Secure boot disabled [ 0.010307] RAMDISK: [mem 0x3d048000-0x3fffdfff] [ 0.010315] ACPI: Early table checksum verification disabled [ 0.010318] ACPI: RSDP 0x00000000CCDFE014 000024 (v02 LENOVO) [ 0.010321] ACPI: XSDT 0x00000000CCDFE1C0 0000E4 (v01 LENOVO TP-N10 00001190 PTEC 00000002) [ 0.010327] ACPI: FACP 0x00000000CCDF8000 00010C (v05 LENOVO TP-N10 00001190 PTEC 00000002) [ 0.010333] ACPI: DSDT 0x00000000CCDE3000 010E77 (v01 LENOVO TP-N10 00001190 INTL 20120711) [ 0.010336] ACPI: FACS 0x00000000CCD68000 000040 [ 0.010339] ACPI: SLIC 0x00000000CCDFD000 000176 (v01 LENOVO TP-N10 00001190 PTEC 00000001) [ 0.010342] ACPI: ASF! 0x00000000CCDFC000 0000A5 (v32 LENOVO TP-N10 00001190 PTEC 00000002) [ 0.010345] ACPI: HPET 0x00000000CCDFB000 000038 (v01 LENOVO TP-N10 00001190 PTEC 00000002) [ 0.010348] ACPI: ECDT 0x00000000CCDFA000 000052 (v01 LENOVO TP-N10 00001190 PTEC 00000002) [ 0.010350] ACPI: APIC 0x00000000CCDF7000 000098 (v01 LENOVO TP-N10 00001190 PTEC 00000002) [ 0.010353] ACPI: MCFG 0x00000000CCDF6000 00003C (v01 LENOVO TP-N10 00001190 PTEC 00000002) [ 0.010356] ACPI: SSDT 0x00000000CCDF5000 000033 (v01 LENOVO TP-SSDT1 00000100 INTL 20120711) [ 0.010359] ACPI: SSDT 0x00000000CCDF4000 000486 (v01 LENOVO TP-SSDT2 00000200 INTL 20120711) [ 0.010362] ACPI: SSDT 0x00000000CCDE2000 0009CB (v01 LENOVO SataAhci 00001000 INTL 20120711) [ 0.010364] ACPI: SSDT 0x00000000CCDE1000 000152 (v01 LENOVO Rmv_Batt 00001000 INTL 20120711) [ 0.010367] ACPI: SSDT 0x00000000CCDE0000 000691 (v01 LENOVO Cpu0Ist 00003000 INTL 20120711) [ 0.010370] ACPI: SSDT 0x00000000CCDDF000 000B74 (v02 LENOVO CpuSsdt 00003000 INTL 20120711) [ 0.010373] ACPI: SSDT 0x00000000CCDDE000 000369 (v02 LENOVO CtdpB 00001000 INTL 20120711) [ 0.010376] ACPI: SSDT 0x00000000CCDDC000 001475 (v01 LENOVO SaSsdt 00003000 INTL 20120711) [ 0.010379] ACPI: SSDT 0x00000000CCDDB000 000394 (v02 LENOVO CppcTabl 00001000 INTL 20120711) [ 0.010382] ACPI: PCCT 0x00000000CCDDA000 00006E (v05 LENOVO TP-N10 00001190 PTEC 00000002) [ 0.010384] ACPI: SSDT 0x00000000CCDD9000 000AC4 (v02 LENOVO Cpc_Tabl 00001000 INTL 20120711) [ 0.010387] ACPI: UEFI 0x00000000CCDD8000 000042 (v01 LENOVO TP-N10 00001190 PTEC 00000002) [ 0.010390] ACPI: MSDM 0x00000000CCD41000 000055 (v03 LENOVO TP-N10 00001190 PTEC 00000002) [ 0.010393] ACPI: BATB 0x00000000CCDD7000 000046 (v01 LENOVO TP-N10 00001190 PTEC 00000002) [ 0.010396] ACPI: FPDT 0x00000000CCDD6000 000064 (v01 LENOVO TP-N10 00001190 PTEC 00000002) [ 0.010398] ACPI: UEFI 0x00000000CCDD5000 0002F6 (v01 LENOVO TP-N10 00001190 PTEC 00000002) [ 0.010401] ACPI: BGRT 0x00000000CCDD4000 000038 (v01 LENOVO TP-N10 00001190 PTEC 00000002) [ 0.010409] ACPI: Local APIC address 0xfee00000 [ 0.010500] No NUMA configuration found [ 0.010501] Faking a node at [mem 0x0000000000000000-0x000000022dffffff] [ 0.010512] NODE_DATA(0) allocated [mem 0x22dfd5000-0x22dffffff] [ 0.010760] Zone ranges: [ 0.010761] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.010762] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.010763] Normal [mem 0x0000000100000000-0x000000022dffffff] [ 0.010764] Device empty [ 0.010765] Movable zone start for each node [ 0.010769] Early memory node ranges [ 0.010770] node 0: [mem 0x0000000000001000-0x0000000000057fff] [ 0.010771] node 0: [mem 0x0000000000059000-0x000000000009bfff] [ 0.010771] node 0: [mem 0x000000000009d000-0x000000000009dfff] [ 0.010772] node 0: [mem 0x0000000000100000-0x00000000ca767fff] [ 0.010773] node 0: [mem 0x00000000ccdff000-0x00000000ccdfffff] [ 0.010773] node 0: [mem 0x0000000100000000-0x000000022dffffff] [ 0.011158] Zeroed struct page in unavailable ranges: 30972 pages [ 0.011159] Initmem setup node 0 [mem 0x0000000000001000-0x000000022dffffff] [ 0.011161] On node 0 totalpages: 2066180 [ 0.011162] DMA zone: 64 pages used for memmap [ 0.011163] DMA zone: 22 pages reserved [ 0.011163] DMA zone: 3995 pages, LIFO batch:0 [ 0.011221] DMA32 zone: 12894 pages used for memmap [ 0.011222] DMA32 zone: 825193 pages, LIFO batch:63 [ 0.023915] Normal zone: 19328 pages used for memmap [ 0.023916] Normal zone: 1236992 pages, LIFO batch:63 [ 0.040698] Reserving Intel graphics memory at [mem 0xce000000-0xcfffffff] [ 0.040961] ACPI: PM-Timer IO Port: 0x1808 [ 0.040963] ACPI: Local APIC address 0xfee00000 [ 0.040971] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.040971] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.040982] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39 [ 0.040985] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.040986] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.040987] ACPI: IRQ0 used by override. [ 0.040988] ACPI: IRQ9 used by override. [ 0.040990] Using ACPI (MADT) for SMP configuration information [ 0.040992] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.041000] e820: update [mem 0xc456e000-0xc4590fff] usable ==> reserved [ 0.041008] TSC deadline timer available [ 0.041009] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.041025] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.041027] PM: Registered nosave memory: [mem 0x00058000-0x00058fff] [ 0.041028] PM: Registered nosave memory: [mem 0x0009c000-0x0009cfff] [ 0.041030] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.041030] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.041032] PM: Registered nosave memory: [mem 0xc2554000-0xc2554fff] [ 0.041033] PM: Registered nosave memory: [mem 0xc2564000-0xc2564fff] [ 0.041035] PM: Registered nosave memory: [mem 0xc456e000-0xc4590fff] [ 0.041036] PM: Registered nosave memory: [mem 0xca768000-0xccbfefff] [ 0.041037] PM: Registered nosave memory: [mem 0xccbff000-0xccd7efff] [ 0.041037] PM: Registered nosave memory: [mem 0xccd7f000-0xccdfefff] [ 0.041039] PM: Registered nosave memory: [mem 0xcce00000-0xcdffffff] [ 0.041040] PM: Registered nosave memory: [mem 0xce000000-0xcfffffff] [ 0.041040] PM: Registered nosave memory: [mem 0xd0000000-0xf80f7fff] [ 0.041041] PM: Registered nosave memory: [mem 0xf80f8000-0xf80f8fff] [ 0.041041] PM: Registered nosave memory: [mem 0xf80f9000-0xfed1bfff] [ 0.041042] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.041042] PM: Registered nosave memory: [mem 0xfed20000-0xffffffff] [ 0.041044] [mem 0xd0000000-0xf80f7fff] available for PCI devices [ 0.041045] Booting paravirtualized kernel on bare hardware [ 0.041048] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.041055] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.041435] percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u262144 [ 0.041441] pcpu-alloc: s184320 r8192 d28672 u262144 alloc=1*2097152 [ 0.041442] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.041471] Built 1 zonelists, mobility grouping on. Total pages: 2033872 [ 0.041472] Policy zone: Normal [ 0.041474] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.4.0-56-generic root=UUID=356b9ac9-6bdb-4fd6-83a5-5fcec346ace9 ro quiet splash vt.handoff=7 [ 0.042259] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.042608] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.042690] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.048393] Calgary: detecting Calgary via BIOS EBDA area [ 0.048395] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.077947] Memory: 7895664K/8264720K available (14339K kernel code, 2426K rwdata, 4932K rodata, 2720K init, 4956K bss, 369056K reserved, 0K cma-reserved) [ 0.077955] random: get_random_u64 called from kmem_cache_open+0x2d/0x410 with crng_init=0 [ 0.078114] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.078128] Kernel/User page tables isolation: enabled [ 0.078143] ftrace: allocating 44542 entries in 174 pages [ 0.097093] rcu: Hierarchical RCU implementation. [ 0.097094] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. [ 0.097095] Tasks RCU enabled. [ 0.097096] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.097096] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.100470] NR_IRQS: 524544, nr_irqs: 760, preallocated irqs: 16 [ 0.100791] random: crng done (trusting CPU's manufacturer) [ 0.100813] vt handoff: transparent VT on vt#7 [ 0.100819] Console: colour dummy device 80x25 [ 0.100823] printk: console [tty0] enabled [ 0.100844] ACPI: Core revision 20190816 [ 0.101021] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.101032] APIC: Switch to symmetric I/O mode setup [ 0.101155] x2apic: IRQ remapping doesn't support X2APIC mode [ 0.101781] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.121033] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2113ea89148, max_idle_ns: 440795275362 ns [ 0.121037] Calibrating delay loop (skipped), value calculated using timer frequency.. 4589.54 BogoMIPS (lpj=9179088) [ 0.121039] pid_max: default: 32768 minimum: 301 [ 0.127664] LSM: Security Framework initializing [ 0.127677] Yama: becoming mindful. [ 0.127720] AppArmor: AppArmor initialized [ 0.127771] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.127786] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.127803] *** VALIDATE tmpfs *** [ 0.127964] *** VALIDATE proc *** [ 0.128019] *** VALIDATE cgroup1 *** [ 0.128020] *** VALIDATE cgroup2 *** [ 0.128081] mce: CPU0: Thermal monitoring enabled (TM1) [ 0.128093] process: using mwait in idle threads [ 0.128095] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.128096] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.128100] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.128101] Spectre V2 : Mitigation: Full generic retpoline [ 0.128102] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.128102] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.128104] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.128104] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl [ 0.128106] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.128109] TAA: Mitigation: Clear CPU buffers [ 0.128110] SRBDS: Mitigation: Microcode [ 0.128110] MDS: Mitigation: Clear CPU buffers [ 0.128378] Freeing SMP alternatives memory: 40K [ 0.131795] smpboot: CPU0: Intel(R) Core(TM) i5-5300U CPU @ 2.30GHz (family: 0x6, model: 0x3d, stepping: 0x4) [ 0.131937] Performance Events: PEBS fmt2+, Broadwell events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.131944] ... version: 3 [ 0.131944] ... bit width: 48 [ 0.131945] ... generic registers: 4 [ 0.131945] ... value mask: 0000ffffffffffff [ 0.131946] ... max period: 00007fffffffffff [ 0.131946] ... fixed-purpose events: 3 [ 0.131947] ... event mask: 000000070000000f [ 0.131988] rcu: Hierarchical SRCU implementation. [ 0.133034] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.133034] smp: Bringing up secondary CPUs ... [ 0.133034] x86: Booting SMP configuration: [ 0.133034] .... node #0, CPUs: #1 [ 0.133034] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.133034] TAA CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/tsx_async_abort.html for more details. [ 0.133034] #2 #3 [ 0.134670] smp: Brought up 1 node, 4 CPUs [ 0.134670] smpboot: Max logical packages: 2 [ 0.134670] smpboot: Total of 4 processors activated (18358.17 BogoMIPS) [ 0.137098] devtmpfs: initialized [ 0.137098] x86/mm: Memory block size: 128MB [ 0.137867] PM: Registering ACPI NVS region [mem 0xccbff000-0xccd7efff] (1572864 bytes) [ 0.137867] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.137867] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.137867] pinctrl core: initialized pinctrl subsystem [ 0.137867] PM: RTC time: 13:10:24, date: 2020-12-02 [ 0.137867] NET: Registered protocol family 16 [ 0.137867] audit: initializing netlink subsys (disabled) [ 0.137867] audit: type=2000 audit(1606914624.036:1): state=initialized audit_enabled=0 res=1 [ 0.137867] EISA bus registered [ 0.137867] cpuidle: using governor ladder [ 0.137867] cpuidle: using governor menu [ 0.137867] Detected 1 PCC Subspaces [ 0.137867] Registering PCC driver as Mailbox controller [ 0.137867] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.137867] ACPI: bus type PCI registered [ 0.137867] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.137867] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.137867] PCI: not using MMCONFIG [ 0.137867] PCI: Using configuration type 1 for base access [ 0.137867] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.141152] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.141152] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.141152] ACPI: Added _OSI(Module Device) [ 0.141152] ACPI: Added _OSI(Processor Device) [ 0.141152] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.141152] ACPI: Added _OSI(Processor Aggregator Device) [ 0.141152] ACPI: Added _OSI(Linux-Dell-Video) [ 0.141152] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.141152] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.165237] ACPI: 11 ACPI AML tables successfully acquired and loaded [ 0.166188] ACPI: EC: EC started [ 0.166189] ACPI: EC: interrupt blocked [ 0.167433] ACPI: \: Used as first EC [ 0.167435] ACPI: \: GPE=0x25, IRQ=-1, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.167436] ACPI: EC: Boot ECDT EC used to handle transactions [ 0.167927] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.174003] ACPI Error: Needed type [Reference], found [Integer] 000000003b5d397f (20190816/exresop-66) [ 0.174010] ACPI Error: AE_AML_OPERAND_TYPE, While resolving operands for [Store] (20190816/dswexec-431) [ 0.174015] No Local Variables are initialized for Method [_PDC] [ 0.174016] Initialized Arguments for Method [_PDC]: (1 arguments defined for method invocation) [ 0.174017] Arg0: 0000000086b270a9 Buffer(12) 01 00 00 00 01 00 00 00 [ 0.174023] ACPI Error: Aborting method \_PR.CPU0._PDC due to previous error (AE_AML_OPERAND_TYPE) (20190816/psparse-529) [ 0.174500] ACPI: Dynamic OEM Table Load: [ 0.174508] ACPI: SSDT 0xFFFF8A426428D000 0005AA (v01 PmRef ApIst 00003000 INTL 20120711) [ 0.175965] ACPI: Dynamic OEM Table Load: [ 0.175971] ACPI: SSDT 0xFFFF8A42643F5E00 000119 (v02 PmRef ApCst 00003000 INTL 20120711) [ 0.177810] ACPI: Interpreter enabled [ 0.177848] ACPI: (supports S0 S3 S4 S5) [ 0.177849] ACPI: Using IOAPIC for interrupt routing [ 0.177889] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.178363] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources [ 0.178372] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.178651] ACPI: Enabled 6 GPEs in block 00 to 7F [ 0.182278] ACPI: Power Resource [PUBS] (on) [ 0.182430] acpi PNP0C0A:01: ACPI dock station (docks/bays count: 1) [ 0.182649] ACPI: Power Resource [NVP3] (on) [ 0.182678] ACPI: Power Resource [NVP2] (on) [ 0.187423] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.187516] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.187605] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.187694] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.187785] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.187873] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.187961] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.188050] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.188156] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f]) [ 0.188161] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.188344] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug PCIeCapability LTR] [ 0.188427] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability] [ 0.188428] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR] [ 0.188430] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER] [ 0.188431] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM [ 0.188633] PCI host bridge to bus 0000:00 [ 0.188635] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.188637] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.188638] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.188639] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window] [ 0.188640] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window] [ 0.188641] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window] [ 0.188642] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window] [ 0.188643] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] [ 0.188644] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] [ 0.188645] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 0.188646] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 0.188647] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfebfffff window] [ 0.188648] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff window] [ 0.188649] pci_bus 0000:00: root bus resource [bus 00-3f] [ 0.188659] pci 0000:00:00.0: [8086:1604] type 00 class 0x060000 [ 0.188752] pci 0000:00:02.0: [8086:1616] type 00 class 0x030000 [ 0.188764] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf0ffffff 64bit] [ 0.188770] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.188774] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f] [ 0.188787] pci 0000:00:02.0: BAR 2: assigned to efifb [ 0.188788] pci 0000:00:02.0: DMAR: Disabling IOMMU for graphics on this chipset [ 0.188879] pci 0000:00:03.0: [8086:160c] type 00 class 0x040300 [ 0.188889] pci 0000:00:03.0: reg 0x10: [mem 0xf1230000-0xf1233fff 64bit] [ 0.189006] pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330 [ 0.189024] pci 0000:00:14.0: reg 0x10: [mem 0xf1220000-0xf122ffff 64bit] [ 0.189079] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.189160] pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000 [ 0.189181] pci 0000:00:16.0: reg 0x10: [mem 0xf1239000-0xf123901f 64bit] [ 0.189245] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.189318] pci 0000:00:19.0: [8086:15a2] type 00 class 0x020000 [ 0.189335] pci 0000:00:19.0: reg 0x10: [mem 0xf1200000-0xf121ffff] [ 0.189341] pci 0000:00:19.0: reg 0x14: [mem 0xf123e000-0xf123efff] [ 0.189348] pci 0000:00:19.0: reg 0x18: [io 0x3080-0x309f] [ 0.189400] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.189476] pci 0000:00:1b.0: [8086:9ca0] type 00 class 0x040300 [ 0.189494] pci 0000:00:1b.0: reg 0x10: [mem 0xf1234000-0xf1237fff 64bit] [ 0.189548] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.189628] pci 0000:00:1c.0: [8086:9c9a] type 01 class 0x060400 [ 0.189703] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.189860] pci 0000:00:1c.1: [8086:9c94] type 01 class 0x060400 [ 0.189944] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.190111] pci 0000:00:1d.0: [8086:9ca6] type 00 class 0x0c0320 [ 0.190131] pci 0000:00:1d.0: reg 0x10: [mem 0xf123d000-0xf123d3ff] [ 0.190212] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.190299] pci 0000:00:1f.0: [8086:9cc3] type 00 class 0x060100 [ 0.190482] pci 0000:00:1f.2: [8086:9c83] type 00 class 0x010601 [ 0.190496] pci 0000:00:1f.2: reg 0x10: [io 0x30a8-0x30af] [ 0.190502] pci 0000:00:1f.2: reg 0x14: [io 0x30b4-0x30b7] [ 0.190508] pci 0000:00:1f.2: reg 0x18: [io 0x30a0-0x30a7] [ 0.190514] pci 0000:00:1f.2: reg 0x1c: [io 0x30b0-0x30b3] [ 0.190520] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f] [ 0.190526] pci 0000:00:1f.2: reg 0x24: [mem 0xf123c000-0xf123c7ff] [ 0.190558] pci 0000:00:1f.2: PME# supported from D3hot [ 0.190630] pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500 [ 0.190646] pci 0000:00:1f.3: reg 0x10: [mem 0xf1238000-0xf12380ff 64bit] [ 0.190664] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf] [ 0.190757] pci 0000:00:1f.6: [8086:9ca4] type 00 class 0x118000 [ 0.190789] pci 0000:00:1f.6: reg 0x10: [mem 0xf123b000-0xf123bfff 64bit] [ 0.191001] pci 0000:02:00.0: [10ec:5227] type 00 class 0xff0000 [ 0.191038] pci 0000:02:00.0: reg 0x10: [mem 0xf1100000-0xf1100fff] [ 0.191187] pci 0000:02:00.0: supports D1 D2 [ 0.191188] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.191325] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.191329] pci 0000:00:1c.0: bridge window [mem 0xf1100000-0xf11fffff] [ 0.191525] pci 0000:03:00.0: [8086:095b] type 00 class 0x028000 [ 0.191626] pci 0000:03:00.0: reg 0x10: [mem 0xf1000000-0xf1001fff 64bit] [ 0.191921] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.192348] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.192352] pci 0000:00:1c.1: bridge window [mem 0xf1000000-0xf10fffff] [ 0.193619] ACPI: EC: interrupt unblocked [ 0.193619] ACPI: EC: event unblocked [ 0.193619] ACPI: \_SB_.PCI0.LPC_.EC__: GPE=0x25, IRQ=-1, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.193619] ACPI: \_SB_.PCI0.LPC_.EC__: Boot DSDT EC used to handle transactions and events [ 0.193622] iommu: Default domain type: Translated [ 0.193622] SCSI subsystem initialized [ 0.193622] libata version 3.00 loaded. [ 0.193622] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=mem,locks=none [ 0.193622] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.193622] pci 0000:00:02.0: vgaarb: setting as boot device [ 0.193622] vgaarb: loaded [ 0.193622] ACPI: bus type USB registered [ 0.193622] usbcore: registered new interface driver usbfs [ 0.193622] usbcore: registered new interface driver hub [ 0.193622] usbcore: registered new device driver usb [ 0.193622] pps_core: LinuxPPS API ver. 1 registered [ 0.193622] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.193622] PTP clock support registered [ 0.193622] EDAC MC: Ver: 3.0.0 [ 0.193622] Registered efivars operations [ 0.193622] PCI: Using ACPI for IRQ routing [ 0.194278] PCI: pci_cache_line_size set to 64 bytes [ 0.194604] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] [ 0.194605] e820: reserve RAM buffer [mem 0x0009c000-0x0009ffff] [ 0.194605] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] [ 0.194606] e820: reserve RAM buffer [mem 0xc2554018-0xc3ffffff] [ 0.194607] e820: reserve RAM buffer [mem 0xc456e000-0xc7ffffff] [ 0.194608] e820: reserve RAM buffer [mem 0xca768000-0xcbffffff] [ 0.194609] e820: reserve RAM buffer [mem 0xcce00000-0xcfffffff] [ 0.194610] e820: reserve RAM buffer [mem 0x22e000000-0x22fffffff] [ 0.194724] NetLabel: Initializing [ 0.194725] NetLabel: domain hash size = 128 [ 0.194725] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.194740] NetLabel: unlabeled traffic allowed by default [ 0.197154] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.197158] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.199184] clocksource: Switched to clocksource tsc-early [ 0.210342] *** VALIDATE bpf *** [ 0.210426] VFS: Disk quotas dquot_6.6.0 [ 0.210444] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.210475] *** VALIDATE ramfs *** [ 0.210479] *** VALIDATE hugetlbfs *** [ 0.210573] AppArmor: AppArmor Filesystem Enabled [ 0.210602] pnp: PnP ACPI init [ 0.211152] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.211154] system 00:00: [mem 0x000e0000-0x000e3fff] has been reserved [ 0.211156] system 00:00: [mem 0x000e4000-0x000e7fff] has been reserved [ 0.211157] system 00:00: [mem 0x000e8000-0x000ebfff] has been reserved [ 0.211158] system 00:00: [mem 0x000ec000-0x000effff] has been reserved [ 0.211159] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved [ 0.211161] system 00:00: [mem 0x00100000-0xcfffffff] could not be reserved [ 0.211162] system 00:00: [mem 0xfec00000-0xffffffff] could not be reserved [ 0.211167] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.211265] pnp 00:01: [Firmware Bug]: PNP resource [mem 0xfed10000-0xfed13fff] covers only part of 0000:00:00.0 Intel MCH; extending to [mem 0xfed10000-0xfed17fff] [ 0.211281] system 00:01: [io 0x1800-0x189f] has been reserved [ 0.211283] system 00:01: [io 0x0800-0x087f] has been reserved [ 0.211284] system 00:01: [io 0x0880-0x08ff] has been reserved [ 0.211285] system 00:01: [io 0x0900-0x097f] has been reserved [ 0.211286] system 00:01: [io 0x0980-0x09ff] has been reserved [ 0.211288] system 00:01: [io 0x0a00-0x0a7f] has been reserved [ 0.211289] system 00:01: [io 0x0a80-0x0aff] has been reserved [ 0.211290] system 00:01: [io 0x0b00-0x0b7f] has been reserved [ 0.211292] system 00:01: [io 0x0b80-0x0bff] has been reserved [ 0.211293] system 00:01: [io 0x15e0-0x15ef] has been reserved [ 0.211294] system 00:01: [io 0x1600-0x167f] has been reserved [ 0.211296] system 00:01: [io 0x1640-0x165f] has been reserved [ 0.211298] system 00:01: [mem 0xf8000000-0xfbffffff] could not be reserved [ 0.211300] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.211301] system 00:01: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.211303] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.211304] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.211306] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved [ 0.211309] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.211384] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.211407] pnp 00:03: Plug and Play ACPI device, IDs LEN0071 PNP0303 (active) [ 0.211425] pnp 00:04: Plug and Play ACPI device, IDs LEN0046 PNP0f13 (active) [ 0.212221] system 00:05: [mem 0xd0010000-0xd001ffff] has been reserved [ 0.212223] system 00:05: [mem 0xd0000000-0xd000ffff] has been reserved [ 0.212227] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.212270] pnp: PnP ACPI: found 6 devices [ 0.213560] thermal_sys: Registered thermal governor 'fair_share' [ 0.213561] thermal_sys: Registered thermal governor 'bang_bang' [ 0.213562] thermal_sys: Registered thermal governor 'step_wise' [ 0.213562] thermal_sys: Registered thermal governor 'user_space' [ 0.213563] thermal_sys: Registered thermal governor 'power_allocator' [ 0.218050] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.218088] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.218093] pci 0000:00:1c.0: bridge window [mem 0xf1100000-0xf11fffff] [ 0.218099] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.218103] pci 0000:00:1c.1: bridge window [mem 0xf1000000-0xf10fffff] [ 0.218111] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.218112] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.218114] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.218115] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window] [ 0.218116] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window] [ 0.218117] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window] [ 0.218118] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window] [ 0.218119] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window] [ 0.218120] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window] [ 0.218121] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window] [ 0.218122] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window] [ 0.218124] pci_bus 0000:00: resource 15 [mem 0xd0000000-0xfebfffff window] [ 0.218125] pci_bus 0000:00: resource 16 [mem 0xfed40000-0xfed4bfff window] [ 0.218126] pci_bus 0000:02: resource 1 [mem 0xf1100000-0xf11fffff] [ 0.218127] pci_bus 0000:03: resource 1 [mem 0xf1000000-0xf10fffff] [ 0.218249] NET: Registered protocol family 2 [ 0.218438] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.218500] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.218690] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.218839] TCP: Hash tables configured (established 65536 bind 65536) [ 0.218889] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.218919] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.218977] NET: Registered protocol family 1 [ 0.218982] NET: Registered protocol family 44 [ 0.218992] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.219479] PCI: CLS 64 bytes, default 64 [ 0.219523] Trying to unpack rootfs image as initramfs... [ 0.352014] Initramfs unpacking failed: Decoding failed [ 0.358747] Freeing initrd memory: 48856K [ 0.358802] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.358804] software IO TLB: mapped [mem 0xbb539000-0xbf539000] (64MB) [ 0.359037] check: Scanning for low memory corruption every 60 seconds [ 0.359521] Initialise system trusted keyrings [ 0.359535] Key type blacklist registered [ 0.359575] workingset: timestamp_bits=36 max_order=21 bucket_order=0 [ 0.360965] zbud: loaded [ 0.361354] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.361513] fuse: init (API version 7.31) [ 0.361529] *** VALIDATE fuse *** [ 0.361531] *** VALIDATE fuse *** [ 0.361644] Platform Keyring initialized [ 0.366008] Key type asymmetric registered [ 0.366008] Asymmetric key parser 'x509' registered [ 0.366015] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) [ 0.366063] io scheduler mq-deadline registered [ 0.366556] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.366615] efifb: probing for efifb [ 0.366640] efifb: showing boot graphics [ 0.367199] efifb: framebuffer at 0xe0000000, using 4128k, total 4128k [ 0.367200] efifb: mode is 1366x768x32, linelength=5504, pages=1 [ 0.367200] efifb: scrolling: redraw [ 0.367201] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.367242] fbcon: Deferring console take-over [ 0.367243] fb0: EFI VGA frame buffer device [ 0.367251] intel_idle: MWAIT substates: 0x11142120 [ 0.367252] intel_idle: v0.4.1 model 0x3D [ 0.367503] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.367876] ACPI: AC Adapter [AC] (on-line) [ 0.367940] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 0.367975] ACPI: Lid Switch [LID] [ 0.368004] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 0.368028] ACPI: Sleep Button [SLPB] [ 0.368073] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.368099] ACPI: Power Button [PWRF] [ 0.370399] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.370400] ACPI: Thermal Zone [THM0] (54 C) [ 0.370565] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.370676] battery: ACPI: Battery Slot [BAT0] (battery absent) [ 0.373815] Linux agpgart interface v0.103 [ 0.377161] loop: module loaded [ 0.377377] libphy: Fixed MDIO Bus: probed [ 0.377378] tun: Universal TUN/TAP device driver, 1.6 [ 0.377494] PPP generic driver version 2.4.2 [ 0.377620] VFIO - User Level meta-driver version: 0.3 [ 0.377729] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.377732] ehci-pci: EHCI PCI platform driver [ 0.377873] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.377878] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 0.377896] ehci-pci 0000:00:1d.0: debug port 2 [ 0.381826] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 0.381839] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf123d000 [ 0.385017] battery: ACPI: Battery Slot [BAT1] (battery present) [ 0.397100] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.397154] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 0.397156] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.397157] usb usb1: Product: EHCI Host Controller [ 0.397158] usb usb1: Manufacturer: Linux 5.4.0-56-generic ehci_hcd [ 0.397159] usb usb1: SerialNumber: 0000:00:1d.0 [ 0.397364] hub 1-0:1.0: USB hub found [ 0.397370] hub 1-0:1.0: 3 ports detected [ 0.397714] ehci-platform: EHCI generic platform driver [ 0.397730] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.397734] ohci-pci: OHCI PCI platform driver [ 0.397744] ohci-platform: OHCI generic platform driver [ 0.397752] uhci_hcd: USB Universal Host Controller Interface driver [ 0.397881] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.397886] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 0.398929] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x000000000004b810 [ 0.398933] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 0.399075] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 0.399076] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.399077] usb usb2: Product: xHCI Host Controller [ 0.399078] usb usb2: Manufacturer: Linux 5.4.0-56-generic xhci-hcd [ 0.399079] usb usb2: SerialNumber: 0000:00:14.0 [ 0.399259] hub 2-0:1.0: USB hub found [ 0.399271] hub 2-0:1.0: 11 ports detected [ 0.401284] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.401287] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.401290] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 0.401320] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04 [ 0.401321] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.401322] usb usb3: Product: xHCI Host Controller [ 0.401323] usb usb3: Manufacturer: Linux 5.4.0-56-generic xhci-hcd [ 0.401324] usb usb3: SerialNumber: 0000:00:14.0 [ 0.401499] hub 3-0:1.0: USB hub found [ 0.401507] hub 3-0:1.0: 4 ports detected [ 0.402161] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 0.403970] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.403974] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.404192] mousedev: PS/2 mouse device common for all mice [ 0.404413] rtc_cmos 00:02: RTC can wake from S4 [ 0.404601] rtc_cmos 00:02: registered as rtc0 [ 0.404613] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.404619] i2c /dev entries driver [ 0.404676] device-mapper: uevent: version 1.0.3 [ 0.404725] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com [ 0.404744] platform eisa.0: Probing EISA bus 0 [ 0.404750] platform eisa.0: EISA: Cannot allocate resource for mainboard [ 0.404751] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 0.404752] platform eisa.0: Cannot allocate resource for EISA slot 2 [ 0.404753] platform eisa.0: Cannot allocate resource for EISA slot 3 [ 0.404754] platform eisa.0: Cannot allocate resource for EISA slot 4 [ 0.404755] platform eisa.0: Cannot allocate resource for EISA slot 5 [ 0.404756] platform eisa.0: Cannot allocate resource for EISA slot 6 [ 0.404757] platform eisa.0: Cannot allocate resource for EISA slot 7 [ 0.404758] platform eisa.0: Cannot allocate resource for EISA slot 8 [ 0.404759] platform eisa.0: EISA: Detected 0 cards [ 0.404768] intel_pstate: Intel P-state driver initializing [ 0.404932] ledtrig-cpu: registered to indicate activity on CPUs [ 0.404936] EFI Variables Facility v0.08 2004-May-17 [ 0.406675] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 0.489709] drop_monitor: Initializing network drop monitor service [ 0.489858] NET: Registered protocol family 10 [ 0.495414] Segment Routing with IPv6 [ 0.495433] NET: Registered protocol family 17 [ 0.495461] Key type dns_resolver registered [ 0.495656] RAS: Correctable Errors collector initialized. [ 0.495686] microcode: sig=0x306d4, pf=0x40, revision=0x2f [ 0.495721] microcode: Microcode Update Driver: v2.2. [ 0.495725] IPI shorthand broadcast: enabled [ 0.495731] sched_clock: Marking stable (495349386, 368847)->(524689469, -28971236) [ 0.495793] registered taskstats version 1 [ 0.495801] Loading compiled-in X.509 certificates [ 0.496455] Loaded X.509 cert 'Build time autogenerated kernel key: 094e0f64537699c38eac1422da4dd7fa08baa936' [ 0.496479] zswap: loaded using pool lzo/zbud [ 0.496529] Key type ._fscrypt registered [ 0.496529] Key type .fscrypt registered [ 0.502051] Key type big_key registered [ 0.504669] Key type encrypted registered [ 0.504673] AppArmor: AppArmor sha1 policy hashing enabled [ 0.505079] integrity: Loading X.509 certificate: UEFI:db [ 0.505120] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' [ 0.505121] integrity: Loading X.509 certificate: UEFI:db [ 0.505150] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' [ 0.505151] integrity: Loading X.509 certificate: UEFI:db [ 0.505169] integrity: Loaded X.509 cert 'Lenovo Ltd.: ThinkPad Product CA 2012: 838b1f54c1550463f45f98700640f11069265949' [ 0.505170] integrity: Loading X.509 certificate: UEFI:db [ 0.505184] integrity: Loaded X.509 cert 'Lenovo UEFI CA 2014: 4b91a68732eaefdd2c8ffffc6b027ec3449e9c8f' [ 0.505538] integrity: Loading X.509 certificate: UEFI:MokListRT [ 0.505553] integrity: Loaded X.509 cert 'SomeOrg: shim: a01ee84e9b37ace407961cc468c5909447878469' [ 0.505554] integrity: Loading X.509 certificate: UEFI:MokListRT [ 0.505860] integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63' [ 0.506366] ima: No TPM chip found, activating TPM-bypass! [ 0.506372] ima: Allocated hash algorithm: sha1 [ 0.506376] ima: No architecture policies found [ 0.506386] evm: Initialising EVM extended attributes: [ 0.506387] evm: security.selinux [ 0.506387] evm: security.SMACK64 [ 0.506388] evm: security.SMACK64EXEC [ 0.506388] evm: security.SMACK64TRANSMUTE [ 0.506388] evm: security.SMACK64MMAP [ 0.506389] evm: security.apparmor [ 0.506389] evm: security.ima [ 0.506390] evm: security.capability [ 0.506390] evm: HMAC attrs: 0x1 [ 0.506814] PM: Magic number: 0:182:179 [ 0.506855] acpi device:0f: hash matches [ 0.506908] rtc_cmos 00:02: setting system clock to 2020-12-02T13:10:25 UTC (1606914625) [ 0.507906] Freeing unused decrypted memory: 2040K [ 0.508307] Freeing unused kernel image memory: 2720K [ 0.541107] Write protecting the kernel read-only data: 22528k [ 0.541573] Freeing unused kernel image memory: 2008K [ 0.541788] Freeing unused kernel image memory: 1212K [ 0.550363] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 0.550364] x86/mm: Checking user space page tables [ 0.558544] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 0.558546] Run /init as init process [ 0.655699] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00) [ 0.655848] acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00) [ 0.679022] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 0.679023] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 0.679208] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 0.680427] ahci 0000:00:1f.2: version 3.0 [ 0.680553] ahci 0000:00:1f.2: BIOS update required for Link Power Management support [ 0.681002] i801_smbus 0000:00:1f.3: SPD Write Disable is set [ 0.681026] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.693059] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 3 ports 6 Gbps 0x1 impl SATA mode [ 0.693062] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst [ 0.696275] scsi host0: ahci [ 0.699421] scsi host1: ahci [ 0.699803] scsi host2: ahci [ 0.699854] ata1: SATA max UDMA/133 abar m2048@0xf123c000 port 0xf123c100 irq 45 [ 0.699856] ata2: DUMMY [ 0.699856] ata3: DUMMY [ 0.733089] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 0.737100] usb 2-7: new full-speed USB device number 2 using xhci_hcd [ 0.868253] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock [ 0.886500] usb 2-7: New USB device found, idVendor=8087, idProduct=0a2a, bcdDevice= 0.01 [ 0.886502] usb 2-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 0.889399] usb 1-1: New USB device found, idVendor=8087, idProduct=8001, bcdDevice= 0.03 [ 0.889401] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 0.889663] hub 1-1:1.0: USB hub found [ 0.889769] hub 1-1:1.0: 8 ports detected [ 0.938864] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 50:7b:9d:a5:9b:3f [ 0.938865] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 0.938891] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: 1000FF-0FF [ 0.939735] e1000e 0000:00:19.0 enp0s25: renamed from eth0 [ 1.013096] usb 2-8: new high-speed USB device number 3 using xhci_hcd [ 1.013119] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.013256] ata1.00: LPM support broken, forcing max_power [ 1.013481] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 1.013483] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 1.013485] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 1.013786] ata1.00: ATA-10: KINGSTON SA400S37480G, SBFKK1B3, max UDMA/133 [ 1.013788] ata1.00: 937703088 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 1.013928] ata1.00: LPM support broken, forcing max_power [ 1.014059] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 1.014061] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 1.014063] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 1.014128] ata1.00: configured for UDMA/133 [ 1.025219] scsi 0:0:0:0: Direct-Access ATA KINGSTON SA400S3 K1B3 PQ: 0 ANSI: 5 [ 1.025568] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.025636] sd 0:0:0:0: [sda] 937703088 512-byte logical blocks: (480 GB/447 GiB) [ 1.025656] sd 0:0:0:0: [sda] Write Protect is off [ 1.025659] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.025678] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.047005] sda: sda1 sda2 [ 1.047377] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.170793] usb 2-8: New USB device found, idVendor=5986, idProduct=0366, bcdDevice=10.19 [ 1.170795] usb 2-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.170796] usb 2-8: Product: Integrated Camera [ 1.170797] usb 2-8: Manufacturer: SunplusIT Inc [ 1.220622] fbcon: Taking over console [ 1.220699] Console: switching to colour frame buffer device 170x48 [ 1.231619] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 1.381052] tsc: Refined TSC clocksource calibration: 2294.687 MHz [ 1.381061] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x21139a22526, max_idle_ns: 440795252169 ns [ 1.381074] clocksource: Switched to clocksource tsc [ 1.410766] systemd[1]: Inserted module 'autofs4' [ 1.470936] psmouse serio1: synaptics: queried max coordinates: x [..5712], y [..4780] [ 1.515892] psmouse serio1: synaptics: queried min coordinates: x [1232..], y [1074..] [ 1.515896] psmouse serio1: synaptics: Trying to set up SMBus access [ 1.543576] systemd[1]: systemd 245.4-4ubuntu3.3 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 1.561184] systemd[1]: Detected architecture x86-64. [ 1.579135] systemd[1]: Set hostname to . [ 1.725228] systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly. [ 1.795959] systemd[1]: Created slice system-modprobe.slice. [ 1.796170] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 1.796321] systemd[1]: Created slice User and Session Slice. [ 1.796375] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 1.796586] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 1.796622] systemd[1]: Reached target User and Group Name Lookups. [ 1.796635] systemd[1]: Reached target Remote File Systems. [ 1.796644] systemd[1]: Reached target Slices. [ 1.796747] systemd[1]: Listening on Syslog Socket. [ 1.796822] systemd[1]: Listening on fsck to fsckd communication Socket. [ 1.796864] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 1.797015] systemd[1]: Listening on Journal Audit Socket. [ 1.797128] systemd[1]: Listening on Journal Socket (/dev/log). [ 1.797211] systemd[1]: Listening on Journal Socket. [ 1.797294] systemd[1]: Listening on udev Control Socket. [ 1.797352] systemd[1]: Listening on udev Kernel Socket. [ 1.798200] systemd[1]: Mounting Huge Pages File System... [ 1.799070] systemd[1]: Mounting POSIX Message Queue File System... [ 1.800404] systemd[1]: Mounting Kernel Debug File System... [ 1.801803] systemd[1]: Mounting Kernel Trace File System... [ 1.803345] systemd[1]: Starting Journal Service... [ 1.804946] systemd[1]: Starting Set the console keyboard layout... [ 1.806525] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 1.807796] systemd[1]: Starting Load Kernel Module drm... [ 1.809150] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 1.809990] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 1.813837] systemd[1]: Starting Load Kernel Modules... [ 1.815283] systemd[1]: Starting Remount Root and Kernel File Systems... [ 1.816650] systemd[1]: Starting udev Coldplug all Devices... [ 1.817936] systemd[1]: Starting Uncomplicated firewall... [ 1.820128] systemd[1]: Mounted Huge Pages File System. [ 1.820303] systemd[1]: Mounted POSIX Message Queue File System. [ 1.820522] systemd[1]: Mounted Kernel Debug File System. [ 1.821118] systemd[1]: Mounted Kernel Trace File System. [ 1.822221] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 1.828676] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro [ 1.830924] systemd[1]: Finished Remount Root and Kernel File Systems. [ 1.832107] systemd[1]: Activating swap /swapfile... [ 1.837160] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 1.837229] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 1.839367] systemd[1]: Starting Load/Save Random Seed... [ 1.840686] systemd[1]: Starting Create System Users... [ 1.841202] systemd[1]: modprobe@drm.service: Succeeded. [ 1.841705] systemd[1]: Finished Load Kernel Module drm. [ 1.842343] systemd[1]: Finished Uncomplicated firewall. [ 1.864407] systemd[1]: Finished Load/Save Random Seed. [ 1.867291] systemd[1]: Finished Create System Users. [ 1.867776] lp: driver loaded but no devices found [ 1.869301] systemd[1]: Starting Create Static Device Nodes in /dev... [ 1.887288] ppdev: user-space parallel port driver [ 1.890086] systemd[1]: Finished Create Static Device Nodes in /dev. [ 1.891857] systemd[1]: Starting udev Kernel Device Manager... [ 1.894471] systemd[1]: Finished Load Kernel Modules. [ 1.896436] systemd[1]: Mounting FUSE Control File System... [ 1.899159] systemd[1]: Mounting Kernel Configuration File System... [ 1.902351] systemd[1]: Starting Apply Kernel Variables... [ 1.909561] systemd[1]: Mounted FUSE Control File System. [ 1.909904] systemd[1]: Mounted Kernel Configuration File System. [ 1.941978] systemd[1]: Finished Apply Kernel Variables. [ 1.950978] systemd[1]: Finished udev Coldplug all Devices. [ 1.956786] systemd[1]: Finished Set the console keyboard layout. [ 1.956902] systemd[1]: Reached target Local File Systems (Pre). [ 1.960222] systemd[1]: Mounting Mount unit for core18, revision 1880... [ 1.961890] systemd[1]: Mounting Mount unit for gnome-3-34-1804, revision 36... [ 1.963448] systemd[1]: Mounting Mount unit for gtk-common-themes, revision 1506... [ 1.965248] systemd[1]: Mounting Mount unit for snap-store, revision 467... [ 1.966795] systemd[1]: Mounting Mount unit for snapd, revision 8542... [ 1.976465] systemd[1]: Started Journal Service. [ 1.986049] systemd-journald[260]: Received client request to flush runtime journal. [ 2.001077] Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k SSFS [ 2.593810] Non-volatile memory driver v1.3 [ 2.594439] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 2.594750] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 2.614332] thinkpad_acpi: ThinkPad ACPI Extras v0.26 [ 2.614335] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 2.614336] thinkpad_acpi: ThinkPad BIOS N10ET40W (1.19 ), EC N10HT14W [ 2.614336] thinkpad_acpi: Lenovo ThinkPad X250, model 20CLS28G02 [ 2.619085] thinkpad_acpi: radio switch found; radios are enabled [ 2.619271] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver [ 2.619271] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... [ 2.629534] mc: Linux media interface: v0.10 [ 2.640244] Intel(R) Wireless WiFi driver for Linux [ 2.640246] Copyright(c) 2003- 2015 Intel Corporation [ 2.644846] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked [ 2.652138] Bluetooth: Core ver 2.22 [ 2.652154] NET: Registered protocol family 31 [ 2.652155] Bluetooth: HCI device and connection manager initialized [ 2.652158] Bluetooth: HCI socket layer initialized [ 2.652160] Bluetooth: L2CAP socket layer initialized [ 2.652169] Bluetooth: SCO socket layer initialized [ 2.652389] videodev: Linux video capture interface: v2.00 [ 2.681592] thinkpad_acpi: battery 2 registered (start 0, stop 100) [ 2.681598] battery: new extension: ThinkPad Battery Extension [ 2.681658] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input6 [ 2.719378] iwlwifi 0000:03:00.0: Found debug destination: EXTERNAL_DRAM [ 2.719381] iwlwifi 0000:03:00.0: Found debug configuration: 0 [ 2.719772] iwlwifi 0000:03:00.0: loaded firmware version 29.1654887522.0 op_mode iwlmvm [ 2.730606] uvcvideo: Found UVC 1.00 device Integrated Camera (5986:0366) [ 2.731065] usbcore: registered new interface driver btusb [ 2.744682] rmi4_smbus 0-002c: registering SMbus-connected sensor [ 2.748065] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer [ 2.748067] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 2.748067] RAPL PMU: hw unit of domain package 2^-14 Joules [ 2.748068] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 2.748069] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 2.748558] Bluetooth: hci0: read Intel version: 370810011003110e00 [ 2.750181] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:14.0/usb2/2-8/2-8:1.0/input/input7 [ 2.750330] usbcore: registered new interface driver uvcvideo [ 2.750331] USB Video Class driver (1.1.1) [ 2.751527] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq [ 2.757460] cryptd: max_cpu_qlen set to 1000 [ 2.779084] iwlwifi 0000:03:00.0: Detected Intel(R) Dual Band Wireless N 7265, REV=0x210 [ 2.792574] iwlwifi 0000:03:00.0: Applying debug destination EXTERNAL_DRAM [ 2.793619] iwlwifi 0000:03:00.0: Allocated 0x00400000 bytes for firmware monitor. [ 2.802169] iwlwifi 0000:03:00.0: base HW address: 10:02:b5:a2:27:22 [ 2.817056] AVX2 version of gcm_enc/dec engaged. [ 2.817058] AES CTR mode by8 optimization enabled [ 2.817405] rmi4_f01 rmi4-00.fn01: found RMI device, manufacturer: Synaptics, product: TM3075-002, fw id: 1741313 [ 2.844884] i915 0000:00:02.0: enabling device (0006 -> 0007) [ 2.845416] checking generic (e0000000 408000) vs hw (e0000000 10000000) [ 2.845418] fb0: switching to inteldrmfb from EFI VGA [ 2.846694] Console: switching to colour dummy device 80x25 [ 2.849110] i915 0000:00:02.0: vgaarb: deactivate vga console [ 2.851282] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.851283] [drm] Driver supports precise vblank timestamp query. [ 2.851318] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=mem [ 2.877694] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' [ 2.878126] thermal thermal_zone2: failed to read out thermal zone (-61) [ 2.888320] input: Synaptics TM3075-002 as /devices/rmi4-00/input/input8 [ 2.899171] serio: RMI4 PS/2 pass-through port at rmi4-00.fn03 [ 2.905974] i915 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [i915]] Panel advertises DPCD backlight support, but VBT disagrees. If your backlight controls don't work try booting with i915.enable_dpcd_backlight=1. If your machine needs this, please file a _new_ bug report on bugs.freedesktop.org against DRI -> DRM/Intel [ 2.921919] [drm] Initialized i915 1.6.0 20190822 for 0000:00:02.0 on minor 0 [ 2.923270] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 2.923881] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10 [ 2.966061] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3232: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 2.966065] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 2.966067] snd_hda_codec_realtek hdaudioC1D0: hp_outs=2 (0x16/0x15/0x0/0x0/0x0) [ 2.966068] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 2.966069] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 2.966071] snd_hda_codec_realtek hdaudioC1D0: Dock Mic=0x19 [ 2.966073] snd_hda_codec_realtek hdaudioC1D0: Mic=0x1a [ 2.966074] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12 [ 3.024860] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11 [ 3.024927] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12 [ 3.024988] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13 [ 3.025059] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14 [ 3.086467] usb 2-7: USB disconnect, device number 2 [ 3.140605] iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0 [ 3.142908] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 3.143030] fbcon: i915drmfb (fb0) is primary device [ 3.143121] Console: switching to colour frame buffer device 170x48 [ 3.143146] i915 0000:00:02.0: fb0: i915drmfb frame buffer device [ 3.157080] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15 [ 3.157157] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input16 [ 3.157223] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input17 [ 3.157288] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input18 [ 3.157351] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input19 [ 3.158561] intel_rapl_common: Found RAPL domain package [ 3.158563] intel_rapl_common: Found RAPL domain core [ 3.158564] intel_rapl_common: Found RAPL domain uncore [ 3.158565] intel_rapl_common: Found RAPL domain dram [ 3.247946] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 3.315510] input: TPPS/2 IBM TrackPoint as /devices/rmi4-00/rmi4-00.fn03/serio2/input/input9 [ 3.440716] audit: type=1400 audit(1606914628.422:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=544 comm="apparmor_parser" [ 3.440721] audit: type=1400 audit(1606914628.426:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=543 comm="apparmor_parser" [ 3.440725] audit: type=1400 audit(1606914628.426:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ippusbxd" pid=545 comm="apparmor_parser" [ 3.441840] audit: type=1400 audit(1606914628.430:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=546 comm="apparmor_parser" [ 3.441845] audit: type=1400 audit(1606914628.430:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=546 comm="apparmor_parser" [ 3.444464] audit: type=1400 audit(1606914628.430:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=547 comm="apparmor_parser" [ 3.449857] audit: type=1400 audit(1606914628.438:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=551 comm="apparmor_parser" [ 3.449862] audit: type=1400 audit(1606914628.438:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=551 comm="apparmor_parser" [ 3.449865] audit: type=1400 audit(1606914628.438:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=551 comm="apparmor_parser" [ 5.093073] Bluetooth: hci0: command 0xfc8e tx timeout [ 5.794217] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 5.794219] Bluetooth: BNEP filters: protocol multicast [ 5.794223] Bluetooth: BNEP socket layer initialized [ 6.401016] iwlwifi 0000:03:00.0: Applying debug destination EXTERNAL_DRAM [ 6.428792] kauditd_printk_skb: 43 callbacks suppressed [ 6.428794] audit: type=1400 audit(1606914631.414:54): apparmor="DENIED" operation="capable" profile="/usr/sbin/cups-browsed" pid=707 comm="cups-browsed" capability=23 capname="sys_nice" [ 6.486998] iwlwifi 0000:03:00.0: Applying debug destination EXTERNAL_DRAM [ 6.488429] iwlwifi 0000:03:00.0: FW already configured (0) - re-configuring [ 9.635542] rfkill: input handler disabled [ 10.140711] wlp3s0: authenticate with 08:6a:0a:42:c0:d9 [ 10.148352] wlp3s0: send auth to 08:6a:0a:42:c0:d9 (try 1/3) [ 10.150141] wlp3s0: authenticated [ 10.157116] wlp3s0: associate with 08:6a:0a:42:c0:d9 (try 1/3) [ 10.158620] wlp3s0: RX AssocResp from 08:6a:0a:42:c0:d9 (capab=0x1011 status=0 aid=1) [ 10.160398] wlp3s0: associated [ 10.190474] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [ 10.242789] wlp3s0: Limiting TX power to 24 (24 - 0) dBm as advertised by 08:6a:0a:42:c0:d9 [ 13.125147] Bluetooth: hci0: sending Intel patch command (0xfc8e) failed (-110) [ 13.125210] Bluetooth: hci0: sending frame failed (-19) [ 15.141162] Bluetooth: hci0: command 0xfc11 tx timeout [ 15.141167] Bluetooth: hci0: Exiting manufacturer mode failed (-110) [ 278.458564] rfkill: input handler enabled [ 282.544531] rfkill: input handler disabled [ 1488.547302] usb 2-2: new full-speed USB device number 4 using xhci_hcd [ 1488.697528] usb 2-2: New USB device found, idVendor=056a, idProduct=0374, bcdDevice= 1.11 [ 1488.697534] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1488.697538] usb 2-2: Product: Intuos S [ 1488.697541] usb 2-2: Manufacturer: Wacom Co.,Ltd. [ 1488.697543] usb 2-2: SerialNumber: 0FH00R2007575 [ 1488.728242] hidraw: raw HID events driver (C) Jiri Kosina [ 1488.734155] usbcore: registered new interface driver usbhid [ 1488.734157] usbhid: USB HID core driver [ 1488.744813] hid-generic 0003:056A:0374.0001: hiddev0,hidraw0: USB HID v1.10 Device [Wacom Co.,Ltd. Intuos S] on usb-0000:00:14.0-2/input0 [ 1488.755349] input: Wacom Intuos S Pen as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/0003:056A:0374.0001/input/input20 [ 1488.815701] input: Wacom Intuos S Pad as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/0003:056A:0374.0001/input/input22 [ 1488.816061] wacom 0003:056A:0374.0001: hidraw0: USB HID v1.10 Device [Wacom Co.,Ltd. Intuos S] on usb-0000:00:14.0-2/input0 [ 1489.165578] usb 2-2: USB disconnect, device number 4 [ 1489.551307] usb 2-2: new full-speed USB device number 5 using xhci_hcd [ 1489.700780] usb 2-2: New USB device found, idVendor=2d1f, idProduct=0374, bcdDevice= 1.11 [ 1489.700786] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1489.700790] usb 2-2: Product: Intuos S [ 1489.700792] usb 2-2: Manufacturer: Wacom Co.,Ltd. [ 1489.700795] usb 2-2: SerialNumber: 0FH00R2007575 [ 1489.703007] input: Wacom Co.,Ltd. Intuos S as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/0003:2D1F:0374.0002/input/input23 [ 1489.706310] hid-generic 0003:2D1F:0374.0002: input,hidraw0: USB HID v1.10 Device [Wacom Co.,Ltd. Intuos S] on usb-0000:00:14.0-2/input0 [ 1494.312569] usb 2-2: USB disconnect, device number 5 [ 1494.691247] usb 2-2: new full-speed USB device number 6 using xhci_hcd [ 1494.841620] usb 2-2: New USB device found, idVendor=056a, idProduct=0374, bcdDevice= 1.11 [ 1494.841625] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1494.841629] usb 2-2: Product: Intuos S [ 1494.841632] usb 2-2: Manufacturer: Wacom Co.,Ltd. [ 1494.841634] usb 2-2: SerialNumber: 0FH00R2007575 [ 1494.848701] input: Wacom Intuos S Pen as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/0003:056A:0374.0003/input/input24 [ 1494.848969] input: Wacom Intuos S Pad as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/0003:056A:0374.0003/input/input26 [ 1494.907405] wacom 0003:056A:0374.0003: hidraw0: USB HID v1.10 Device [Wacom Co.,Ltd. Intuos S] on usb-0000:00:14.0-2/input0 [ 1495.070441] input: Wacom Intuos S Pen as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/0003:056A:0374.0004/input/input27 [ 1495.127445] input: Wacom Intuos S Pad as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/0003:056A:0374.0004/input/input29 [ 1495.127705] wacom 0003:056A:0374.0004: hidraw0: USB HID v1.10 Device [Wacom Co.,Ltd. Intuos S] on usb-0000:00:14.0-2/input0 [ 3446.945584] perf: interrupt took too long (2542 > 2500), lowering kernel.perf_event_max_sample_rate to 78500 [ 3760.018561] perf: interrupt took too long (3183 > 3177), lowering kernel.perf_event_max_sample_rate to 62750 [ 4260.683817] perf: interrupt took too long (3983 > 3978), lowering kernel.perf_event_max_sample_rate to 50000 [ 4656.608170] perf: interrupt took too long (5110 > 4978), lowering kernel.perf_event_max_sample_rate to 39000 [ 5502.044787] perf: interrupt took too long (6413 > 6387), lowering kernel.perf_event_max_sample_rate to 31000 [ 7033.884123] wlp3s0: deauthenticating from 08:6a:0a:42:c0:d9 by local choice (Reason: 3=DEAUTH_LEAVING) [ 7038.329198] PM: suspend entry (deep) [ 7038.343618] Filesystems sync: 0.014 seconds [ 7038.344293] Freezing user space processes ... (elapsed 0.003 seconds) done. [ 7038.347569] OOM killer disabled. [ 7038.347569] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 7038.348888] printk: Suspending console(s) (use no_console_suspend to debug) [ 7038.409408] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 7038.409628] sd 0:0:0:0: [sda] Stopping disk [ 7038.412068] e1000e: EEE TX LPI TIMER: 00000011 [ 7038.509938] ACPI: EC: interrupt blocked [ 7038.549801] ACPI: Preparing to enter system sleep state S3 [ 7038.554602] ACPI: EC: event blocked [ 7038.554603] ACPI: EC: EC stopped [ 7038.554604] PM: Saving platform NVS memory [ 7038.554626] Disabling non-boot CPUs ... [ 7038.555219] IRQ 47: no longer affine to CPU1 [ 7038.556237] smpboot: CPU 1 is now offline [ 7038.561749] IRQ 52: no longer affine to CPU2 [ 7038.563547] smpboot: CPU 2 is now offline [ 7038.566343] IRQ 18: no longer affine to CPU3 [ 7038.566347] IRQ 23: no longer affine to CPU3 [ 7038.567365] smpboot: CPU 3 is now offline [ 7038.569720] ACPI: Low-level resume complete [ 7038.569768] ACPI: EC: EC started [ 7038.569769] PM: Restoring platform NVS memory [ 7038.572281] Enabling non-boot CPUs ... [ 7038.572319] x86: Booting SMP configuration: [ 7038.572320] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 7038.572945] CPU1 is up [ 7038.572971] smpboot: Booting Node 0 Processor 2 APIC 0x2 [ 7038.574679] CPU2 is up [ 7038.574703] smpboot: Booting Node 0 Processor 3 APIC 0x3 [ 7038.575257] CPU3 is up [ 7038.576551] ACPI: Waking up from system sleep state S3 [ 7038.587524] ACPI: EC: interrupt unblocked [ 7038.634522] ACPI: EC: event unblocked [ 7038.636133] sd 0:0:0:0: [sda] Starting disk [ 7038.922289] usb 2-8: reset high-speed USB device number 3 using xhci_hcd [ 7038.948838] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 7038.948920] ata1.00: LPM support broken, forcing max_power [ 7038.949112] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 7038.949114] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 7038.949116] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 7038.949390] ata1.00: LPM support broken, forcing max_power [ 7038.949544] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 7038.949545] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 7038.949546] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 7038.949702] ata1.00: configured for UDMA/133 [ 7039.077518] acpi LNXPOWER:02: Turning OFF [ 7039.077766] OOM killer enabled. [ 7039.077766] Restarting tasks ... done. [ 7039.093360] thermal thermal_zone2: failed to read out thermal zone (-61) [ 7039.119547] PM: suspend exit [ 7039.325027] e1000e: enp0s25 NIC Link is Down [ 7039.538334] iwlwifi 0000:03:00.0: Applying debug destination EXTERNAL_DRAM [ 7039.622189] iwlwifi 0000:03:00.0: Applying debug destination EXTERNAL_DRAM [ 7039.623456] iwlwifi 0000:03:00.0: FW already configured (0) - re-configuring [ 7043.240487] wlp3s0: authenticate with 08:6a:0a:42:c0:d9 [ 7043.246586] wlp3s0: send auth to 08:6a:0a:42:c0:d9 (try 1/3) [ 7043.248122] wlp3s0: authenticated [ 7043.250119] wlp3s0: associate with 08:6a:0a:42:c0:d9 (try 1/3) [ 7043.251159] wlp3s0: RX AssocResp from 08:6a:0a:42:c0:d9 (capab=0x1011 status=0 aid=2) [ 7043.260095] wlp3s0: associated [ 7043.274643] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [ 7043.349322] wlp3s0: Limiting TX power to 24 (24 - 0) dBm as advertised by 08:6a:0a:42:c0:d9 [10560.895607] mce: CPU1: Core temperature above threshold, cpu clock throttled (total events = 1) [10560.895608] mce: CPU0: Core temperature above threshold, cpu clock throttled (total events = 1) [10560.895610] mce: CPU0: Package temperature above threshold, cpu clock throttled (total events = 1) [10560.895610] mce: CPU1: Package temperature above threshold, cpu clock throttled (total events = 1) [10560.895615] mce: CPU3: Package temperature above threshold, cpu clock throttled (total events = 1) [10560.895617] mce: CPU2: Package temperature above threshold, cpu clock throttled (total events = 1) [10560.899591] mce: CPU0: Core temperature/speed normal [10560.899592] mce: CPU1: Core temperature/speed normal [10560.899593] mce: CPU2: Package temperature/speed normal [10560.899594] mce: CPU3: Package temperature/speed normal [10560.899595] mce: CPU1: Package temperature/speed normal [10560.899597] mce: CPU0: Package temperature/speed normal [10789.949966] perf: interrupt took too long (8057 > 8016), lowering kernel.perf_event_max_sample_rate to 24750 [10869.624764] mce: CPU1: Core temperature above threshold, cpu clock throttled (total events = 17) [10869.624765] mce: CPU0: Core temperature above threshold, cpu clock throttled (total events = 17) [10869.624768] mce: CPU3: Package temperature above threshold, cpu clock throttled (total events = 26) [10869.624769] mce: CPU2: Package temperature above threshold, cpu clock throttled (total events = 26) [10869.624770] mce: CPU0: Package temperature above threshold, cpu clock throttled (total events = 26) [10869.624772] mce: CPU1: Package temperature above threshold, cpu clock throttled (total events = 26) [10869.626756] mce: CPU3: Package temperature/speed normal [10869.626757] mce: CPU2: Package temperature/speed normal [10869.626759] mce: CPU1: Core temperature/speed normal [10869.626760] mce: CPU0: Core temperature/speed normal [10869.626761] mce: CPU1: Package temperature/speed normal [10869.626762] mce: CPU0: Package temperature/speed normal [10942.753679] mce: CPU3: Core temperature above threshold, cpu clock throttled (total events = 12) [10942.753680] mce: CPU2: Core temperature above threshold, cpu clock throttled (total events = 12) [10942.755673] mce: CPU3: Core temperature/speed normal [10942.755674] mce: CPU2: Core temperature/speed normal [11199.076797] mce: CPU3: Package temperature above threshold, cpu clock throttled (total events = 83) [11199.076799] mce: CPU2: Package temperature above threshold, cpu clock throttled (total events = 83) [11199.076802] mce: CPU1: Package temperature above threshold, cpu clock throttled (total events = 83) [11199.076803] mce: CPU0: Package temperature above threshold, cpu clock throttled (total events = 83) [11199.079791] mce: CPU3: Package temperature/speed normal [11199.079792] mce: CPU2: Package temperature/speed normal [11199.079800] mce: CPU0: Package temperature/speed normal [11199.079801] mce: CPU1: Package temperature/speed normal [11676.002543] wlp3s0: deauthenticating from 08:6a:0a:42:c0:d9 by local choice (Reason: 3=DEAUTH_LEAVING) [11681.313726] PM: suspend entry (deep) [11681.325484] Filesystems sync: 0.011 seconds [11681.331989] Freezing user space processes ... (elapsed 0.003 seconds) done. [11681.335484] OOM killer disabled. [11681.335485] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [11681.336954] printk: Suspending console(s) (use no_console_suspend to debug) [11681.399452] sd 0:0:0:0: [sda] Synchronizing SCSI cache [11681.399704] sd 0:0:0:0: [sda] Stopping disk [11681.405767] e1000e: EEE TX LPI TIMER: 00000011 [11681.504019] ACPI: EC: interrupt blocked [11681.543972] ACPI: Preparing to enter system sleep state S3 [11681.549180] ACPI: EC: event blocked [11681.549182] ACPI: EC: EC stopped [11681.549183] PM: Saving platform NVS memory [11681.549208] Disabling non-boot CPUs ... [11681.549759] IRQ 47: no longer affine to CPU1 [11681.551622] smpboot: CPU 1 is now offline [11681.554503] IRQ 52: no longer affine to CPU2 [11681.556312] smpboot: CPU 2 is now offline [11681.560046] smpboot: CPU 3 is now offline [11681.563668] ACPI: Low-level resume complete [11681.563716] ACPI: EC: EC started [11681.563716] PM: Restoring platform NVS memory [11681.566133] Enabling non-boot CPUs ... [11681.566175] x86: Booting SMP configuration: [11681.566176] smpboot: Booting Node 0 Processor 1 APIC 0x1 [11681.566815] CPU1 is up [11681.566843] smpboot: Booting Node 0 Processor 2 APIC 0x2 [11681.568556] CPU2 is up [11681.568579] smpboot: Booting Node 0 Processor 3 APIC 0x3 [11681.569452] CPU3 is up [11681.572600] ACPI: Waking up from system sleep state S3 [11681.581503] ACPI: EC: interrupt unblocked [11681.627252] ACPI: EC: event unblocked [11681.636927] sd 0:0:0:0: [sda] Starting disk [11681.873186] usb 2-8: reset high-speed USB device number 3 using xhci_hcd [11681.951865] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [11681.951946] ata1.00: LPM support broken, forcing max_power [11681.952144] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [11681.952146] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [11681.952148] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [11681.952421] ata1.00: LPM support broken, forcing max_power [11681.952580] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [11681.952582] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [11681.952583] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [11681.952737] ata1.00: configured for UDMA/133 [11684.546602] acpi LNXPOWER:02: Turning OFF [11684.547123] OOM killer enabled. [11684.547126] Restarting tasks ... [11684.547259] usb 2-2: USB disconnect, device number 6 [11684.565077] done. [11684.567368] thermal thermal_zone2: failed to read out thermal zone (-61) [11684.589443] PM: suspend exit [11684.971729] e1000e: enp0s25 NIC Link is Down [11685.184522] iwlwifi 0000:03:00.0: Applying debug destination EXTERNAL_DRAM [11685.276983] iwlwifi 0000:03:00.0: Applying debug destination EXTERNAL_DRAM [11685.278221] iwlwifi 0000:03:00.0: FW already configured (0) - re-configuring [11688.923522] wlp3s0: authenticate with 08:6a:0a:42:c0:d9 [11688.928677] wlp3s0: send auth to 08:6a:0a:42:c0:d9 (try 1/3) [11688.930723] wlp3s0: authenticated [11688.936636] wlp3s0: associate with 08:6a:0a:42:c0:d9 (try 1/3) [11688.937744] wlp3s0: RX AssocResp from 08:6a:0a:42:c0:d9 (capab=0x1011 status=0 aid=2) [11688.940144] wlp3s0: associated [11688.954269] wlp3s0: Limiting TX power to 24 (24 - 0) dBm as advertised by 08:6a:0a:42:c0:d9 [11688.966861] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [18842.275236] wlp3s0: deauthenticating from 08:6a:0a:42:c0:d9 by local choice (Reason: 3=DEAUTH_LEAVING) [18846.438632] PM: suspend entry (deep) [18846.451551] Filesystems sync: 0.012 seconds [18846.453109] Freezing user space processes ... (elapsed 0.002 seconds) done. [18846.456023] OOM killer disabled. [18846.456024] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [18846.457358] printk: Suspending console(s) (use no_console_suspend to debug) [18846.512075] sd 0:0:0:0: [sda] Synchronizing SCSI cache [18846.512267] sd 0:0:0:0: [sda] Stopping disk [18846.519020] e1000e: EEE TX LPI TIMER: 00000011 [18846.616550] ACPI: EC: interrupt blocked [18846.656501] ACPI: Preparing to enter system sleep state S3 [18846.661254] ACPI: EC: event blocked [18846.661255] ACPI: EC: EC stopped [18846.661256] PM: Saving platform NVS memory [18846.661279] Disabling non-boot CPUs ... [18846.661883] IRQ 47: no longer affine to CPU1 [18846.663685] smpboot: CPU 1 is now offline [18846.666950] IRQ 52: no longer affine to CPU2 [18846.668625] smpboot: CPU 2 is now offline [18846.672084] smpboot: CPU 3 is now offline [18846.675034] ACPI: Low-level resume complete [18846.675081] ACPI: EC: EC started [18846.675082] PM: Restoring platform NVS memory [18846.677519] Enabling non-boot CPUs ... [18846.677561] x86: Booting SMP configuration: [18846.677562] smpboot: Booting Node 0 Processor 1 APIC 0x1 [18846.678205] CPU1 is up [18846.678233] smpboot: Booting Node 0 Processor 2 APIC 0x2 [18846.679949] CPU2 is up [18846.679973] smpboot: Booting Node 0 Processor 3 APIC 0x3 [18846.680881] CPU3 is up [18846.684110] ACPI: Waking up from system sleep state S3 [18846.695504] ACPI: EC: interrupt unblocked [18846.742417] ACPI: EC: event unblocked [18846.744597] sd 0:0:0:0: [sda] Starting disk [18846.977585] usb 2-8: reset high-speed USB device number 3 using xhci_hcd [18847.056169] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [18847.056251] ata1.00: LPM support broken, forcing max_power [18847.056443] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [18847.056446] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [18847.056447] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [18847.056714] ata1.00: LPM support broken, forcing max_power [18847.056865] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [18847.056867] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [18847.056868] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [18847.057020] ata1.00: configured for UDMA/133 [18847.132243] acpi LNXPOWER:02: Turning OFF [18847.132590] OOM killer enabled. [18847.132591] Restarting tasks ... done. [18847.167240] thermal thermal_zone2: failed to read out thermal zone (-61) [18847.186277] PM: suspend exit [18847.382152] e1000e: enp0s25 NIC Link is Down [18847.596249] iwlwifi 0000:03:00.0: Applying debug destination EXTERNAL_DRAM [18847.688764] iwlwifi 0000:03:00.0: Applying debug destination EXTERNAL_DRAM [18847.690114] iwlwifi 0000:03:00.0: FW already configured (0) - re-configuring [18851.299831] wlp3s0: authenticate with 08:6a:0a:42:c0:d9 [18851.306769] wlp3s0: send auth to 08:6a:0a:42:c0:d9 (try 1/3) [18851.308501] wlp3s0: authenticated [18851.309088] wlp3s0: associate with 08:6a:0a:42:c0:d9 (try 1/3) [18851.310123] wlp3s0: RX AssocResp from 08:6a:0a:42:c0:d9 (capab=0x1011 status=0 aid=2) [18851.312174] wlp3s0: associated [18851.325147] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [18851.342652] wlp3s0: Limiting TX power to 24 (24 - 0) dBm as advertised by 08:6a:0a:42:c0:d9 [20410.426395] usb 2-2: new full-speed USB device number 7 using xhci_hcd [20410.576501] usb 2-2: New USB device found, idVendor=056a, idProduct=0374, bcdDevice= 1.11 [20410.576507] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [20410.576510] usb 2-2: Product: Intuos S [20410.576513] usb 2-2: Manufacturer: Wacom Co.,Ltd. [20410.576516] usb 2-2: SerialNumber: 0FH00R2007575 [20410.583834] input: Wacom Intuos S Pen as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/0003:056A:0374.0005/input/input30 [20410.584191] input: Wacom Intuos S Pad as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/0003:056A:0374.0005/input/input32 [20410.642657] wacom 0003:056A:0374.0005: hidraw0: USB HID v1.10 Device [Wacom Co.,Ltd. Intuos S] on usb-0000:00:14.0-2/input0 [20410.810533] input: Wacom Intuos S Pen as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/0003:056A:0374.0006/input/input33 [20410.870876] input: Wacom Intuos S Pad as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/0003:056A:0374.0006/input/input35 [20410.871283] wacom 0003:056A:0374.0006: hidraw0: USB HID v1.10 Device [Wacom Co.,Ltd. Intuos S] on usb-0000:00:14.0-2/input0 [20411.047680] usb 2-2: USB disconnect, device number 7 [20411.494386] usb 2-2: new full-speed USB device number 8 using xhci_hcd [20411.644434] usb 2-2: New USB device found, idVendor=2d1f, idProduct=0374, bcdDevice= 1.11 [20411.644440] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [20411.644443] usb 2-2: Product: Intuos S [20411.644446] usb 2-2: Manufacturer: Wacom Co.,Ltd. [20411.644449] usb 2-2: SerialNumber: 0FH00R2007575 [20411.647132] input: Wacom Co.,Ltd. Intuos S as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/0003:2D1F:0374.0007/input/input36 [20411.706995] hid-generic 0003:2D1F:0374.0007: input,hidraw0: USB HID v1.10 Device [Wacom Co.,Ltd. Intuos S] on usb-0000:00:14.0-2/input0 [20418.494814] usb 2-2: USB disconnect, device number 8 [20418.886362] usb 2-2: new full-speed USB device number 9 using xhci_hcd [20419.040517] usb 2-2: New USB device found, idVendor=056a, idProduct=0374, bcdDevice= 1.11 [20419.040523] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [20419.040526] usb 2-2: Product: Intuos S [20419.040529] usb 2-2: Manufacturer: Wacom Co.,Ltd. [20419.040532] usb 2-2: SerialNumber: 0FH00R2007575 [20419.049014] input: Wacom Intuos S Pen as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/0003:056A:0374.0008/input/input37 [20419.049448] input: Wacom Intuos S Pad as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/0003:056A:0374.0008/input/input39 [20419.106761] wacom 0003:056A:0374.0008: hidraw0: USB HID v1.10 Device [Wacom Co.,Ltd. Intuos S] on usb-0000:00:14.0-2/input0 [20419.264959] input: Wacom Intuos S Pen as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/0003:056A:0374.0009/input/input40 [20419.265130] input: Wacom Intuos S Pad as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/0003:056A:0374.0009/input/input42 [20419.322697] wacom 0003:056A:0374.0009: hidraw0: USB HID v1.10 Device [Wacom Co.,Ltd. Intuos S] on usb-0000:00:14.0-2/input0 [22795.352691] wlp3s0: deauthenticating from 08:6a:0a:42:c0:d9 by local choice (Reason: 3=DEAUTH_LEAVING) [22798.231771] iwlwifi 0000:03:00.0: Applying debug destination EXTERNAL_DRAM [22798.310997] iwlwifi 0000:03:00.0: Applying debug destination EXTERNAL_DRAM [22798.312336] iwlwifi 0000:03:00.0: FW already configured (0) - re-configuring [22801.916368] wlp3s0: authenticate with 08:6a:0a:42:c0:d9 [22801.922049] wlp3s0: send auth to 08:6a:0a:42:c0:d9 (try 1/3) [22801.923934] wlp3s0: authenticated [22801.927109] wlp3s0: associate with 08:6a:0a:42:c0:d9 (try 1/3) [22801.928616] wlp3s0: RX AssocResp from 08:6a:0a:42:c0:d9 (capab=0x1011 status=0 aid=1) [22801.930412] wlp3s0: associated [22801.945107] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [22801.953380] wlp3s0: Limiting TX power to 24 (24 - 0) dBm as advertised by 08:6a:0a:42:c0:d9 [28610.409970] EvJobScheduler[23776]: segfault at ffffffffffffffff ip 00007ffa4f283f89 sp 00007ffa37ffe158 error 5 in libc-2.31.so[7ffa4f122000+178000] [28610.409982] Code: 7f 28 c5 f9 6e 0c 17 c5 f9 6e 04 16 c5 f1 74 c0 c5 f9 da c1 c5 f9 74 c7 c5 f9 d7 c8 83 e1 0f 85 c9 0f 85 2a ff ff ff 83 c2 04 <0f> b6 04 17 0f b6 0c 16 85 c0 0f 85 e7 fe ff ff 29 c8 c5 f8 77 c3 [36649.665236] input: Wacom Intuos S Pen as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/0003:056A:0374.000A/input/input43 [36649.724899] input: Wacom Intuos S Pad as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/0003:056A:0374.000A/input/input45 [36649.727103] wacom 0003:056A:0374.000A: hidraw0: USB HID v1.10 Device [Wacom Co.,Ltd. Intuos S] on usb-0000:00:14.0-2/input0 [37219.437462] Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k SSFS [37256.228985] Adding 10485756k swap on /swapfile. Priority:-2 extents:23 across:95387644k SSFS [39044.466496] usb 2-2: USB disconnect, device number 9 [42425.224608] usb 2-2: new full-speed USB device number 10 using xhci_hcd [42425.374315] usb 2-2: New USB device found, idVendor=056a, idProduct=0374, bcdDevice= 1.11 [42425.374320] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [42425.374324] usb 2-2: Product: Intuos S [42425.374326] usb 2-2: Manufacturer: Wacom Co.,Ltd. [42425.374328] usb 2-2: SerialNumber: 0FH00R2007575 [42425.381593] input: Wacom Intuos S Pen as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/0003:056A:0374.000B/input/input46 [42425.440927] input: Wacom Intuos S Pad as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/0003:056A:0374.000B/input/input48 [42425.441323] wacom 0003:056A:0374.000B: hidraw0: USB HID v1.10 Device [Wacom Co.,Ltd. Intuos S] on usb-0000:00:14.0-2/input0 [42425.609076] input: Wacom Intuos S Pen as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/0003:056A:0374.000C/input/input49 [42425.609199] input: Wacom Intuos S Pad as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/0003:056A:0374.000C/input/input51 [42425.668806] wacom 0003:056A:0374.000C: hidraw0: USB HID v1.10 Device [Wacom Co.,Ltd. Intuos S] on usb-0000:00:14.0-2/input0 [42425.845127] usb 2-2: USB disconnect, device number 10 [42426.296531] usb 2-2: new full-speed USB device number 11 using xhci_hcd [42426.446402] usb 2-2: New USB device found, idVendor=2d1f, idProduct=0374, bcdDevice= 1.11 [42426.446406] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [42426.446409] usb 2-2: Product: Intuos S [42426.446411] usb 2-2: Manufacturer: Wacom Co.,Ltd. [42426.446413] usb 2-2: SerialNumber: 0FH00R2007575 [42426.448393] input: Wacom Co.,Ltd. Intuos S as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/0003:2D1F:0374.000D/input/input52 [42426.508808] hid-generic 0003:2D1F:0374.000D: input,hidraw0: USB HID v1.10 Device [Wacom Co.,Ltd. Intuos S] on usb-0000:00:14.0-2/input0 [42489.392207] usb 2-2: USB disconnect, device number 11 [42489.764089] usb 2-2: new full-speed USB device number 12 using xhci_hcd [42489.913793] usb 2-2: New USB device found, idVendor=056a, idProduct=0374, bcdDevice= 1.11 [42489.913799] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [42489.913802] usb 2-2: Product: Intuos S [42489.913805] usb 2-2: Manufacturer: Wacom Co.,Ltd. [42489.913808] usb 2-2: SerialNumber: 0FH00R2007575 [42489.920644] input: Wacom Intuos S Pen as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/0003:056A:0374.000E/input/input53 [42489.980667] input: Wacom Intuos S Pad as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/0003:056A:0374.000E/input/input55 [42489.981101] wacom 0003:056A:0374.000E: hidraw0: USB HID v1.10 Device [Wacom Co.,Ltd. Intuos S] on usb-0000:00:14.0-2/input0 [42490.160772] input: Wacom Intuos S Pen as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/0003:056A:0374.000F/input/input56 [42490.160999] input: Wacom Intuos S Pad as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/0003:056A:0374.000F/input/input58 [42490.220553] wacom 0003:056A:0374.000F: hidraw0: USB HID v1.10 Device [Wacom Co.,Ltd. Intuos S] on usb-0000:00:14.0-2/input0 [49632.438331] wlp3s0: deauthenticating from 08:6a:0a:42:c0:d9 by local choice (Reason: 3=DEAUTH_LEAVING) [49637.017278] PM: suspend entry (deep) [49637.037869] Filesystems sync: 0.020 seconds [49637.045352] Freezing user space processes ... (elapsed 0.003 seconds) done. [49637.048906] OOM killer disabled. [49637.048907] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [49637.050394] printk: Suspending console(s) (use no_console_suspend to debug) [49637.111937] sd 0:0:0:0: [sda] Synchronizing SCSI cache [49637.112162] sd 0:0:0:0: [sda] Stopping disk [49637.118350] e1000e: EEE TX LPI TIMER: 00000011 [49637.216521] ACPI: EC: interrupt blocked [49637.256405] ACPI: Preparing to enter system sleep state S3 [49637.261628] ACPI: EC: event blocked [49637.261629] ACPI: EC: EC stopped [49637.261630] PM: Saving platform NVS memory [49637.261653] Disabling non-boot CPUs ... [49637.262247] IRQ 47: no longer affine to CPU1 [49637.264052] smpboot: CPU 1 is now offline [49637.267513] IRQ 52: no longer affine to CPU2 [49637.268608] smpboot: CPU 2 is now offline [49637.271625] IRQ 18: no longer affine to CPU3 [49637.271632] IRQ 42: no longer affine to CPU3 [49637.272671] smpboot: CPU 3 is now offline [49637.276327] ACPI: Low-level resume complete [49637.276374] ACPI: EC: EC started [49637.276375] PM: Restoring platform NVS memory [49637.278827] Enabling non-boot CPUs ... [49637.278868] x86: Booting SMP configuration: [49637.278868] smpboot: Booting Node 0 Processor 1 APIC 0x1 [49637.279515] CPU1 is up [49637.279542] smpboot: Booting Node 0 Processor 2 APIC 0x2 [49637.281272] CPU2 is up [49637.281297] smpboot: Booting Node 0 Processor 3 APIC 0x3 [49637.282184] CPU3 is up [49637.285561] ACPI: Waking up from system sleep state S3 [49637.293566] ACPI: EC: interrupt unblocked [49637.338805] ACPI: EC: event unblocked [49637.339840] sd 0:0:0:0: [sda] Starting disk [49637.629295] usb 2-8: reset high-speed USB device number 3 using xhci_hcd [49637.652347] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [49637.652418] ata1.00: LPM support broken, forcing max_power [49637.652580] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [49637.652581] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [49637.652583] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [49637.652711] ata1.00: LPM support broken, forcing max_power [49637.652821] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [49637.652822] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [49637.652823] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [49637.652888] ata1.00: configured for UDMA/133 [49637.784160] acpi LNXPOWER:02: Turning OFF [49637.784460] OOM killer enabled. [49637.784461] Restarting tasks ... done. [49637.794725] thermal thermal_zone2: failed to read out thermal zone (-61) [49637.819327] PM: suspend exit [49638.000075] e1000e: enp0s25 NIC Link is Down [49638.214518] iwlwifi 0000:03:00.0: Applying debug destination EXTERNAL_DRAM [49638.299241] iwlwifi 0000:03:00.0: Applying debug destination EXTERNAL_DRAM [49638.300761] iwlwifi 0000:03:00.0: FW already configured (0) - re-configuring [49641.960926] wlp3s0: authenticate with 08:6a:0a:42:c0:d9 [49641.966362] wlp3s0: send auth to 08:6a:0a:42:c0:d9 (try 1/3) [49641.968183] wlp3s0: authenticated [49641.969227] wlp3s0: associate with 08:6a:0a:42:c0:d9 (try 1/3) [49641.970241] wlp3s0: RX AssocResp from 08:6a:0a:42:c0:d9 (capab=0x1011 status=0 aid=1) [49641.973486] wlp3s0: associated [49641.991640] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [49642.017882] wlp3s0: Limiting TX power to 24 (24 - 0) dBm as advertised by 08:6a:0a:42:c0:d9 [56755.816448] input: Wacom Intuos S Pen as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/0003:056A:0374.0010/input/input59 [56755.875506] input: Wacom Intuos S Pad as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/0003:056A:0374.0010/input/input61 [56755.876140] wacom 0003:056A:0374.0010: hidraw0: USB HID v1.10 Device [Wacom Co.,Ltd. Intuos S] on usb-0000:00:14.0-2/input0 [59821.197269] wlp3s0: deauthenticating from 08:6a:0a:42:c0:d9 by local choice (Reason: 3=DEAUTH_LEAVING) [59821.304653] PM: suspend entry (deep) [59821.314272] Filesystems sync: 0.009 seconds [59821.324739] Freezing user space processes ... (elapsed 0.004 seconds) done. [59821.328908] OOM killer disabled. [59821.328908] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [59821.330470] printk: Suspending console(s) (use no_console_suspend to debug) [59821.393805] e1000e: EEE TX LPI TIMER: 00000011 [59821.401712] sd 0:0:0:0: [sda] Synchronizing SCSI cache [59821.401952] sd 0:0:0:0: [sda] Stopping disk [59821.494711] ACPI: EC: interrupt blocked [59821.534381] ACPI: Preparing to enter system sleep state S3 [59821.539982] ACPI: EC: event blocked [59821.539984] ACPI: EC: EC stopped [59821.539985] PM: Saving platform NVS memory [59821.540012] Disabling non-boot CPUs ... [59821.540747] IRQ 47: no longer affine to CPU1 [59821.542557] smpboot: CPU 1 is now offline [59821.545713] IRQ 52: no longer affine to CPU2 [59821.547501] smpboot: CPU 2 is now offline [59821.551105] smpboot: CPU 3 is now offline [59821.554667] ACPI: Low-level resume complete [59821.554715] ACPI: EC: EC started [59821.554715] PM: Restoring platform NVS memory [59821.557137] Enabling non-boot CPUs ... [59821.557178] x86: Booting SMP configuration: [59821.557179] smpboot: Booting Node 0 Processor 1 APIC 0x1 [59821.557821] CPU1 is up [59821.557848] smpboot: Booting Node 0 Processor 2 APIC 0x2 [59821.559553] CPU2 is up [59821.559578] smpboot: Booting Node 0 Processor 3 APIC 0x3 [59821.560453] CPU3 is up [59821.563816] ACPI: Waking up from system sleep state S3 [59821.571880] ACPI: EC: interrupt unblocked [59821.618206] ACPI: EC: event unblocked [59821.628030] sd 0:0:0:0: [sda] Starting disk [59821.867393] usb 2-8: reset high-speed USB device number 3 using xhci_hcd [59821.933931] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [59821.933994] ata1.00: LPM support broken, forcing max_power [59821.934192] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [59821.934194] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [59821.934195] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [59821.934355] ata1.00: LPM support broken, forcing max_power [59821.934491] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [59821.934493] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [59821.934494] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [59821.934593] ata1.00: configured for UDMA/133 [59824.536984] acpi LNXPOWER:02: Turning OFF [59824.537502] OOM killer enabled. [59824.537504] Restarting tasks ... [59824.537658] usb 2-2: USB disconnect, device number 12 [59824.563944] done. [59824.565118] thermal thermal_zone2: failed to read out thermal zone (-61) [59824.586188] PM: suspend exit [59824.885185] e1000e: enp0s25 NIC Link is Down [59825.096993] iwlwifi 0000:03:00.0: Applying debug destination EXTERNAL_DRAM [59825.189147] iwlwifi 0000:03:00.0: Applying debug destination EXTERNAL_DRAM [59825.190364] iwlwifi 0000:03:00.0: FW already configured (0) - re-configuring [59828.876218] wlp3s0: authenticate with 08:6a:0a:42:c0:d9 [59828.882221] wlp3s0: send auth to 08:6a:0a:42:c0:d9 (try 1/3) [59828.884667] wlp3s0: authenticated [59828.891120] wlp3s0: associate with 08:6a:0a:42:c0:d9 (try 1/3) [59828.892676] wlp3s0: RX AssocResp from 08:6a:0a:42:c0:d9 (capab=0x1011 status=0 aid=1) [59828.900861] wlp3s0: associated [59828.926098] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [59828.934462] wlp3s0: Limiting TX power to 24 (24 - 0) dBm as advertised by 08:6a:0a:42:c0:d9 [69191.100128] mce: CPU2: Core temperature above threshold, cpu clock throttled (total events = 40) [69191.100129] mce: CPU3: Core temperature above threshold, cpu clock throttled (total events = 40) [69191.100131] mce: CPU3: Package temperature above threshold, cpu clock throttled (total events = 143) [69191.100133] mce: CPU0: Package temperature above threshold, cpu clock throttled (total events = 143) [69191.100135] mce: CPU1: Package temperature above threshold, cpu clock throttled (total events = 143) [69191.100136] mce: CPU2: Package temperature above threshold, cpu clock throttled (total events = 143) [69191.101133] mce: CPU2: Core temperature/speed normal [69191.101133] mce: CPU3: Core temperature/speed normal [69191.101135] mce: CPU0: Package temperature/speed normal [69191.101136] mce: CPU1: Package temperature/speed normal [69191.101137] mce: CPU3: Package temperature/speed normal [69191.101138] mce: CPU2: Package temperature/speed normal [69768.321508] mce: CPU2: Core temperature above threshold, cpu clock throttled (total events = 595) [69768.321511] mce: CPU0: Package temperature above threshold, cpu clock throttled (total events = 1214) [69768.321512] mce: CPU1: Package temperature above threshold, cpu clock throttled (total events = 1214) [69768.321514] mce: CPU3: Core temperature above threshold, cpu clock throttled (total events = 595) [69768.321516] mce: CPU3: Package temperature above threshold, cpu clock throttled (total events = 1214) [69768.321517] mce: CPU2: Package temperature above threshold, cpu clock throttled (total events = 1214) [69768.323520] mce: CPU0: Package temperature/speed normal [69768.323521] mce: CPU1: Package temperature/speed normal [69768.323523] mce: CPU2: Core temperature/speed normal [69768.323524] mce: CPU3: Core temperature/speed normal [69768.323526] mce: CPU2: Package temperature/speed normal [69768.323527] mce: CPU3: Package temperature/speed normal [70108.485289] mce: CPU2: Core temperature above threshold, cpu clock throttled (total events = 602) [70108.485303] mce: CPU3: Core temperature above threshold, cpu clock throttled (total events = 602) [70108.485305] mce: CPU3: Package temperature above threshold, cpu clock throttled (total events = 1221) [70108.485306] mce: CPU2: Package temperature above threshold, cpu clock throttled (total events = 1221) [70108.485308] mce: CPU0: Package temperature above threshold, cpu clock throttled (total events = 1221) [70108.485309] mce: CPU1: Package temperature above threshold, cpu clock throttled (total events = 1221) [70108.488294] mce: CPU2: Core temperature/speed normal [70108.488295] mce: CPU3: Core temperature/speed normal [70108.488297] mce: CPU1: Package temperature/speed normal [70108.488298] mce: CPU0: Package temperature/speed normal [70108.488299] mce: CPU3: Package temperature/speed normal [70108.488300] mce: CPU2: Package temperature/speed normal [70468.586131] mce: CPU2: Core temperature above threshold, cpu clock throttled (total events = 752) [70468.586132] mce: CPU3: Core temperature above threshold, cpu clock throttled (total events = 752) [70468.586134] mce: CPU0: Package temperature above threshold, cpu clock throttled (total events = 1434) [70468.586136] mce: CPU1: Package temperature above threshold, cpu clock throttled (total events = 1434) [70468.586137] mce: CPU3: Package temperature above threshold, cpu clock throttled (total events = 1434) [70468.586138] mce: CPU2: Package temperature above threshold, cpu clock throttled (total events = 1434) [70468.593134] mce: CPU3: Core temperature/speed normal [70468.593137] mce: CPU2: Core temperature/speed normal [70468.593139] mce: CPU1: Package temperature/speed normal [70468.593140] mce: CPU2: Package temperature/speed normal [70468.593141] mce: CPU3: Package temperature/speed normal [70468.593147] mce: CPU0: Package temperature/speed normal [70770.065554] mce: CPU3: Core temperature above threshold, cpu clock throttled (total events = 867) [70770.065556] mce: CPU2: Core temperature above threshold, cpu clock throttled (total events = 867) [70770.065558] mce: CPU3: Package temperature above threshold, cpu clock throttled (total events = 1640) [70770.065558] mce: CPU2: Package temperature above threshold, cpu clock throttled (total events = 1640) [70770.065563] mce: CPU0: Package temperature above threshold, cpu clock throttled (total events = 1640) [70770.065567] mce: CPU1: Package temperature above threshold, cpu clock throttled (total events = 1640) [70770.067531] mce: CPU3: Core temperature/speed normal [70770.067532] mce: CPU2: Core temperature/speed normal [70770.067534] mce: CPU3: Package temperature/speed normal [70770.067535] mce: CPU2: Package temperature/speed normal [70770.067541] mce: CPU1: Package temperature/speed normal [70770.067542] mce: CPU0: Package temperature/speed normal [71117.359786] mce: CPU3: Core temperature above threshold, cpu clock throttled (total events = 1005) [71117.359788] mce: CPU2: Core temperature above threshold, cpu clock throttled (total events = 1005) [71117.359791] mce: CPU3: Package temperature above threshold, cpu clock throttled (total events = 1928) [71117.359793] mce: CPU2: Package temperature above threshold, cpu clock throttled (total events = 1928) [71117.359795] mce: CPU1: Package temperature above threshold, cpu clock throttled (total events = 1928) [71117.359797] mce: CPU0: Package temperature above threshold, cpu clock throttled (total events = 1928) [71117.360778] mce: CPU2: Core temperature/speed normal [71117.360779] mce: CPU3: Core temperature/speed normal [71117.360783] mce: CPU1: Package temperature/speed normal [71117.360784] mce: CPU0: Package temperature/speed normal [71117.360787] mce: CPU3: Package temperature/speed normal [71117.360789] mce: CPU2: Package temperature/speed normal [71421.814093] mce: CPU3: Core temperature above threshold, cpu clock throttled (total events = 1234) [71421.814094] mce: CPU2: Core temperature above threshold, cpu clock throttled (total events = 1234) [71421.814097] mce: CPU1: Package temperature above threshold, cpu clock throttled (total events = 2855) [71421.814099] mce: CPU0: Package temperature above threshold, cpu clock throttled (total events = 2855) [71421.814100] mce: CPU3: Package temperature above threshold, cpu clock throttled (total events = 2855) [71421.814101] mce: CPU2: Package temperature above threshold, cpu clock throttled (total events = 2855) [71421.817082] mce: CPU3: Core temperature/speed normal [71421.817083] mce: CPU2: Core temperature/speed normal [71421.817085] mce: CPU1: Package temperature/speed normal [71421.817096] mce: CPU0: Package temperature/speed normal [71421.817096] mce: CPU2: Package temperature/speed normal [71421.817098] mce: CPU3: Package temperature/speed normal [71724.518321] mce: CPU0: Package temperature above threshold, cpu clock throttled (total events = 5107) [71724.518323] mce: CPU3: Package temperature above threshold, cpu clock throttled (total events = 5107) [71724.518324] mce: CPU2: Package temperature above threshold, cpu clock throttled (total events = 5107) [71724.518326] mce: CPU1: Package temperature above threshold, cpu clock throttled (total events = 5107) [71724.519323] mce: CPU0: Package temperature/speed normal [71724.519323] mce: CPU2: Package temperature/speed normal [71724.519324] mce: CPU3: Package temperature/speed normal [71724.519325] mce: CPU1: Package temperature/speed normal [72028.579698] mce: CPU3: Core temperature above threshold, cpu clock throttled (total events = 2485) [72028.579714] mce: CPU2: Core temperature above threshold, cpu clock throttled (total events = 2485) [72028.579716] mce: CPU3: Package temperature above threshold, cpu clock throttled (total events = 5821) [72028.579716] mce: CPU2: Package temperature above threshold, cpu clock throttled (total events = 5821) [72028.579722] mce: CPU0: Package temperature above threshold, cpu clock throttled (total events = 5821) [72028.579723] mce: CPU1: Package temperature above threshold, cpu clock throttled (total events = 5821) [72028.582691] mce: CPU2: Core temperature/speed normal [72028.582692] mce: CPU3: Core temperature/speed normal [72028.582693] mce: CPU0: Package temperature/speed normal [72028.582697] mce: CPU1: Package temperature/speed normal [72028.582698] mce: CPU3: Package temperature/speed normal [72028.582700] mce: CPU2: Package temperature/speed normal [72328.591713] mce: CPU1: Package temperature above threshold, cpu clock throttled (total events = 6650) [72328.591715] mce: CPU0: Package temperature above threshold, cpu clock throttled (total events = 6650) [72328.591731] mce: CPU3: Package temperature above threshold, cpu clock throttled (total events = 6650) [72328.591733] mce: CPU2: Package temperature above threshold, cpu clock throttled (total events = 6650) [72328.596728] mce: CPU2: Package temperature/speed normal [72328.596730] mce: CPU3: Package temperature/speed normal [72328.596738] mce: CPU0: Package temperature/speed normal [72328.596739] mce: CPU1: Package temperature/speed normal [72628.673924] mce: CPU3: Package temperature above threshold, cpu clock throttled (total events = 11480) [72628.673926] mce: CPU0: Package temperature above threshold, cpu clock throttled (total events = 11480) [72628.673928] mce: CPU1: Package temperature above threshold, cpu clock throttled (total events = 11480) [72628.673929] mce: CPU2: Package temperature above threshold, cpu clock throttled (total events = 11480) [72628.682935] mce: CPU1: Package temperature/speed normal [72628.682936] mce: CPU0: Package temperature/speed normal [72628.682938] mce: CPU3: Package temperature/speed normal [72628.682939] mce: CPU2: Package temperature/speed normal [72629.855670] mce: CPU3: Core temperature above threshold, cpu clock throttled (total events = 3588) [72629.855671] mce: CPU2: Core temperature above threshold, cpu clock throttled (total events = 3588) [72629.861688] mce: CPU3: Core temperature/speed normal [72629.861689] mce: CPU2: Core temperature/speed normal [72928.720027] mce: CPU0: Package temperature above threshold, cpu clock throttled (total events = 18695) [72928.720028] mce: CPU1: Package temperature above threshold, cpu clock throttled (total events = 18695) [72928.720030] mce: CPU3: Package temperature above threshold, cpu clock throttled (total events = 18695) [72928.720032] mce: CPU2: Package temperature above threshold, cpu clock throttled (total events = 18695) [72928.722031] mce: CPU1: Package temperature/speed normal [72928.722033] mce: CPU0: Package temperature/speed normal [72928.722037] mce: CPU2: Package temperature/speed normal [72928.722038] mce: CPU3: Package temperature/speed normal [73229.433666] mce: CPU2: Package temperature above threshold, cpu clock throttled (total events = 28808) [73229.433667] mce: CPU3: Package temperature above threshold, cpu clock throttled (total events = 28808) [73229.433669] mce: CPU1: Package temperature above threshold, cpu clock throttled (total events = 28808) [73229.433671] mce: CPU0: Package temperature above threshold, cpu clock throttled (total events = 28808) [73229.445692] mce: CPU1: Package temperature/speed normal [73229.445693] mce: CPU0: Package temperature/speed normal [73229.445707] mce: CPU3: Package temperature/speed normal [73229.445708] mce: CPU2: Package temperature/speed normal [73594.292505] audit: type=1400 audit(1607036425.192:55): apparmor="DENIED" operation="capable" profile="/usr/sbin/cups-browsed" pid=52629 comm="cups-browsed" capability=23 capname="sys_nice" [77317.215232] wlp3s0: deauthenticating from 08:6a:0a:42:c0:d9 by local choice (Reason: 3=DEAUTH_LEAVING) [77322.236709] PM: suspend entry (deep) [77322.250953] Filesystems sync: 0.014 seconds [77322.260920] Freezing user space processes ... (elapsed 0.004 seconds) done. [77322.265521] OOM killer disabled. [77322.265522] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [77322.267037] printk: Suspending console(s) (use no_console_suspend to debug) [77322.316383] sd 0:0:0:0: [sda] Synchronizing SCSI cache [77322.317874] sd 0:0:0:0: [sda] Stopping disk [77322.319369] e1000e: EEE TX LPI TIMER: 00000011 [77322.416927] ACPI: EC: interrupt blocked [77322.456846] ACPI: Preparing to enter system sleep state S3 [77322.462002] ACPI: EC: event blocked [77322.462004] ACPI: EC: EC stopped [77322.462005] PM: Saving platform NVS memory [77322.462030] Disabling non-boot CPUs ... [77322.462692] IRQ 47: no longer affine to CPU1 [77322.464506] smpboot: CPU 1 is now offline [77322.467727] IRQ 52: no longer affine to CPU2 [77322.468827] smpboot: CPU 2 is now offline [77322.471970] IRQ 18: no longer affine to CPU3 [77322.473061] smpboot: CPU 3 is now offline [77322.476607] ACPI: Low-level resume complete [77322.476655] ACPI: EC: EC started [77322.476655] PM: Restoring platform NVS memory [77322.479104] Enabling non-boot CPUs ... [77322.479147] x86: Booting SMP configuration: [77322.479148] smpboot: Booting Node 0 Processor 1 APIC 0x1 [77322.479790] CPU1 is up [77322.479817] smpboot: Booting Node 0 Processor 2 APIC 0x2 [77322.481537] CPU2 is up [77322.481562] smpboot: Booting Node 0 Processor 3 APIC 0x3 [77322.482442] CPU3 is up [77322.485636] ACPI: Waking up from system sleep state S3 [77322.494245] ACPI: EC: interrupt unblocked [77322.539176] ACPI: EC: event unblocked [77322.545674] sd 0:0:0:0: [sda] Starting disk [77322.773970] usb 2-8: reset high-speed USB device number 3 using xhci_hcd [77322.852451] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [77322.852531] ata1.00: LPM support broken, forcing max_power [77322.852725] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [77322.852727] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [77322.852729] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [77322.852999] ata1.00: LPM support broken, forcing max_power [77322.853150] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [77322.853151] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [77322.853153] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [77322.853310] ata1.00: configured for UDMA/133 [77322.928356] acpi LNXPOWER:02: Turning OFF [77322.928628] OOM killer enabled. [77322.928629] Restarting tasks ... done. [77322.937022] thermal thermal_zone2: failed to read out thermal zone (-61) [77322.967722] PM: suspend exit [77323.240608] e1000e: enp0s25 NIC Link is Down [77323.457100] iwlwifi 0000:03:00.0: Applying debug destination EXTERNAL_DRAM [77323.541622] iwlwifi 0000:03:00.0: Applying debug destination EXTERNAL_DRAM [77323.542786] iwlwifi 0000:03:00.0: FW already configured (0) - re-configuring [77327.242287] wlp3s0: authenticate with 08:6a:0a:42:c0:d0 [77327.247442] wlp3s0: send auth to 08:6a:0a:42:c0:d0 (try 1/3) [77327.251403] wlp3s0: authenticated [77327.253633] wlp3s0: associate with 08:6a:0a:42:c0:d0 (try 1/3) [77327.258216] wlp3s0: RX AssocResp from 08:6a:0a:42:c0:d0 (capab=0x1411 status=0 aid=1) [77327.260377] wlp3s0: associated [77327.287141] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [77327.333313] wlp3s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 08:6a:0a:42:c0:d0 [84487.878789] wlp3s0: deauthenticating from 08:6a:0a:42:c0:d0 by local choice (Reason: 3=DEAUTH_LEAVING) [84492.309319] PM: suspend entry (deep) [84492.321108] Filesystems sync: 0.011 seconds [84492.321801] Freezing user space processes ... (elapsed 0.003 seconds) done. [84492.324891] OOM killer disabled. [84492.324892] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [84492.326358] printk: Suspending console(s) (use no_console_suspend to debug) [84492.388970] sd 0:0:0:0: [sda] Synchronizing SCSI cache [84492.389186] sd 0:0:0:0: [sda] Stopping disk [84492.391393] e1000e: EEE TX LPI TIMER: 00000011 [84492.489850] ACPI: EC: interrupt blocked [84492.529381] ACPI: Preparing to enter system sleep state S3 [84492.534101] ACPI: EC: event blocked [84492.534102] ACPI: EC: EC stopped [84492.534104] PM: Saving platform NVS memory [84492.534126] Disabling non-boot CPUs ... [84492.534758] IRQ 47: no longer affine to CPU1 [84492.536569] smpboot: CPU 1 is now offline [84492.539464] IRQ 52: no longer affine to CPU2 [84492.540507] smpboot: CPU 2 is now offline [84492.543491] IRQ 18: no longer affine to CPU3 [84492.544517] smpboot: CPU 3 is now offline [84492.547901] ACPI: Low-level resume complete [84492.547949] ACPI: EC: EC started [84492.547949] PM: Restoring platform NVS memory [84492.550351] Enabling non-boot CPUs ... [84492.550392] x86: Booting SMP configuration: [84492.550393] smpboot: Booting Node 0 Processor 1 APIC 0x1 [84492.551039] CPU1 is up [84492.551066] smpboot: Booting Node 0 Processor 2 APIC 0x2 [84492.552779] CPU2 is up [84492.552803] smpboot: Booting Node 0 Processor 3 APIC 0x3 [84492.553586] CPU3 is up [84492.557036] ACPI: Waking up from system sleep state S3 [84492.566055] ACPI: EC: interrupt unblocked [84492.607702] ACPI: EC: event unblocked [84492.609909] sd 0:0:0:0: [sda] Starting disk [84492.842464] usb 2-8: reset high-speed USB device number 3 using xhci_hcd [84492.921423] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [84492.921505] ata1.00: LPM support broken, forcing max_power [84492.921676] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [84492.921677] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [84492.921679] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [84492.921844] ata1.00: LPM support broken, forcing max_power [84492.922026] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [84492.922028] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [84492.922029] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [84492.922095] ata1.00: configured for UDMA/133 [84492.997229] acpi LNXPOWER:02: Turning OFF [84492.997641] OOM killer enabled. [84492.997642] Restarting tasks ... done. [84493.023273] thermal thermal_zone2: failed to read out thermal zone (-61) [84493.040242] PM: suspend exit [84493.205067] e1000e: enp0s25 NIC Link is Down [84493.415051] iwlwifi 0000:03:00.0: Applying debug destination EXTERNAL_DRAM [84493.500044] iwlwifi 0000:03:00.0: Applying debug destination EXTERNAL_DRAM [84493.501550] iwlwifi 0000:03:00.0: FW already configured (0) - re-configuring [84578.931874] wlp3s0: authenticate with 54:67:51:df:4c:5a [84578.937402] wlp3s0: send auth to 54:67:51:df:4c:5a (try 1/3) [84578.959302] wlp3s0: authenticated [84578.963492] wlp3s0: associate with 54:67:51:df:4c:5a (try 1/3) [84578.999033] wlp3s0: RX AssocResp from 54:67:51:df:4c:5a (capab=0x511 status=0 aid=6) [84579.001686] wlp3s0: associated [84579.075942] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [84745.483594] usb 2-2: new full-speed USB device number 13 using xhci_hcd [84745.633378] usb 2-2: New USB device found, idVendor=056a, idProduct=0374, bcdDevice= 1.11 [84745.633384] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [84745.633388] usb 2-2: Product: Intuos S [84745.633391] usb 2-2: Manufacturer: Wacom Co.,Ltd. [84745.633393] usb 2-2: SerialNumber: 0FH00R2007575 [84745.640198] input: Wacom Intuos S Pen as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/0003:056A:0374.0011/input/input62 [84745.640473] input: Wacom Intuos S Pad as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/0003:056A:0374.0011/input/input64 [84745.699922] wacom 0003:056A:0374.0011: hidraw0: USB HID v1.10 Device [Wacom Co.,Ltd. Intuos S] on usb-0000:00:14.0-2/input0 [84863.105088] wlp3s0: disconnect from AP 54:67:51:df:4c:5a for new auth to 54:67:51:df:4c:9b [84863.118339] wlp3s0: authenticate with 54:67:51:df:4c:9b [84863.122422] wlp3s0: send auth to 54:67:51:df:4c:9b (try 1/3) [84863.131635] wlp3s0: authenticated [84863.131854] wlp3s0: associating with AP with corrupt probe response [84863.133824] wlp3s0: associate with 54:67:51:df:4c:9b (try 1/3) [84863.138245] wlp3s0: RX ReassocResp from 54:67:51:df:4c:9b (capab=0x411 status=17 aid=2) [84863.138250] wlp3s0: 54:67:51:df:4c:9b denied association (code=17) [84863.277954] wlp3s0: authenticate with 54:67:51:df:4c:5a [84863.282486] wlp3s0: send auth to 54:67:51:df:4c:5a (try 1/3) [84863.284055] wlp3s0: authenticated [84863.285443] wlp3s0: associate with 54:67:51:df:4c:5a (try 1/3) [84863.326548] wlp3s0: RX AssocResp from 54:67:51:df:4c:5a (capab=0x511 status=0 aid=6) [84863.329214] wlp3s0: associated [84894.628289] wlp3s0: disconnect from AP 54:67:51:df:4c:5a for new auth to 54:67:51:df:4c:9b [84894.634519] wlp3s0: authenticate with 54:67:51:df:4c:9b [84894.638623] wlp3s0: send auth to 54:67:51:df:4c:9b (try 1/3) [84894.646349] wlp3s0: authenticated [84894.646550] wlp3s0: associating with AP with corrupt probe response [84894.649247] wlp3s0: associate with 54:67:51:df:4c:9b (try 1/3) [84894.653804] wlp3s0: RX ReassocResp from 54:67:51:df:4c:9b (capab=0x411 status=17 aid=2) [84894.653807] wlp3s0: 54:67:51:df:4c:9b denied association (code=17) [84894.800688] wlp3s0: authenticate with 54:67:51:df:4c:5a [84894.805860] wlp3s0: send auth to 54:67:51:df:4c:5a (try 1/3) [84894.809482] wlp3s0: authenticated [84894.816999] wlp3s0: associate with 54:67:51:df:4c:5a (try 1/3) [84894.849135] wlp3s0: RX AssocResp from 54:67:51:df:4c:5a (capab=0x511 status=0 aid=6) [84894.852051] wlp3s0: associated [84929.371692] wlp3s0: disconnect from AP 54:67:51:df:4c:5a for new auth to 54:67:51:df:4c:9b [84929.381272] wlp3s0: authenticate with 54:67:51:df:4c:9b [84929.385261] wlp3s0: send auth to 54:67:51:df:4c:9b (try 1/3) [84929.388306] wlp3s0: authenticated [84929.388676] wlp3s0: associating with AP with corrupt probe response [84929.392554] wlp3s0: associate with 54:67:51:df:4c:9b (try 1/3) [84929.396740] wlp3s0: RX ReassocResp from 54:67:51:df:4c:9b (capab=0x411 status=17 aid=2) [84929.396744] wlp3s0: 54:67:51:df:4c:9b denied association (code=17) [84929.545378] wlp3s0: authenticate with 54:67:51:df:4c:5a [84929.550218] wlp3s0: send auth to 54:67:51:df:4c:5a (try 1/3) [84929.552977] wlp3s0: authenticated [84929.556608] wlp3s0: associate with 54:67:51:df:4c:5a (try 1/3) [84929.593559] wlp3s0: RX AssocResp from 54:67:51:df:4c:5a (capab=0x511 status=0 aid=6) [84929.603669] wlp3s0: associated [87442.462927] wlp3s0: disconnect from AP 54:67:51:df:4c:5a for new auth to 54:67:51:df:4c:9b [87442.477433] wlp3s0: authenticate with 54:67:51:df:4c:9b [87442.482996] wlp3s0: send auth to 54:67:51:df:4c:9b (try 1/3) [87442.485823] wlp3s0: authenticated [87442.486036] wlp3s0: associating with AP with corrupt probe response [87442.493462] wlp3s0: associate with 54:67:51:df:4c:9b (try 1/3) [87442.497699] wlp3s0: RX ReassocResp from 54:67:51:df:4c:9b (capab=0x411 status=17 aid=1) [87442.497702] wlp3s0: 54:67:51:df:4c:9b denied association (code=17) [87442.643363] wlp3s0: authenticate with 54:67:51:df:4c:5a [87442.649047] wlp3s0: send auth to 54:67:51:df:4c:5a (try 1/3) [87442.650611] wlp3s0: authenticated [87442.653464] wlp3s0: associate with 54:67:51:df:4c:5a (try 1/3) [87442.695169] wlp3s0: RX AssocResp from 54:67:51:df:4c:5a (capab=0x511 status=0 aid=6) [87442.697646] wlp3s0: associated [87477.441286] wlp3s0: disconnect from AP 54:67:51:df:4c:5a for new auth to 54:67:51:df:4c:9b [87477.452963] wlp3s0: authenticate with 54:67:51:df:4c:9b [87477.457482] wlp3s0: send auth to 54:67:51:df:4c:9b (try 1/3) [87477.460598] wlp3s0: authenticated [87477.460822] wlp3s0: associating with AP with corrupt probe response [87477.461453] wlp3s0: associate with 54:67:51:df:4c:9b (try 1/3) [87477.465643] wlp3s0: RX ReassocResp from 54:67:51:df:4c:9b (capab=0x411 status=17 aid=1) [87477.465647] wlp3s0: 54:67:51:df:4c:9b denied association (code=17) [87477.604557] wlp3s0: authenticate with 54:67:51:df:4c:5a [87477.610938] wlp3s0: send auth to 54:67:51:df:4c:5a (try 1/3) [87477.612438] wlp3s0: authenticated [87477.613295] wlp3s0: associate with 54:67:51:df:4c:5a (try 1/3) [87477.650155] wlp3s0: RX AssocResp from 54:67:51:df:4c:5a (capab=0x511 status=0 aid=6) [87477.652837] wlp3s0: associated [87688.251583] wlp3s0: deauthenticating from 54:67:51:df:4c:5a by local choice (Reason: 3=DEAUTH_LEAVING) [87691.755323] usb 2-7: new full-speed USB device number 14 using xhci_hcd [87691.905278] usb 2-7: New USB device found, idVendor=8087, idProduct=0a2a, bcdDevice= 0.01 [87691.905287] usb 2-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [87691.921722] Bluetooth: hci0: read Intel version: 370810011003110e00 [87691.923170] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq [87692.215873] Bluetooth: hci0: unexpected event for opcode 0xfc2f [87692.232993] Bluetooth: hci0: Intel firmware patch completed and activated [87692.298399] NET: Registered protocol family 38 [87692.334075] Bluetooth: RFCOMM TTY layer initialized [87692.334081] Bluetooth: RFCOMM socket layer initialized [87692.334087] Bluetooth: RFCOMM ver 1.11 [87692.899128] iwlwifi 0000:03:00.0: Applying debug destination EXTERNAL_DRAM [87692.977691] iwlwifi 0000:03:00.0: Applying debug destination EXTERNAL_DRAM [87692.979121] iwlwifi 0000:03:00.0: FW already configured (0) - re-configuring [87696.663493] wlp3s0: authenticate with 54:67:51:df:4c:9b [87696.666891] wlp3s0: send auth to 54:67:51:df:4c:9b (try 1/3) [87696.669709] wlp3s0: authenticated [87696.669869] wlp3s0: associating with AP with corrupt probe response [87696.671229] wlp3s0: associate with 54:67:51:df:4c:9b (try 1/3) [87696.690944] wlp3s0: RX AssocResp from 54:67:51:df:4c:9b (capab=0x411 status=0 aid=1) [87696.693442] wlp3s0: associated [87696.834789] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [87759.289518] wlp3s0: disconnect from AP 54:67:51:df:4c:9b for new auth to 54:67:51:df:4c:5a [87759.303861] wlp3s0: authenticate with 54:67:51:df:4c:5a [87759.310278] wlp3s0: send auth to 54:67:51:df:4c:5a (try 1/3) [87759.332002] wlp3s0: authenticated [87759.334098] wlp3s0: associate with 54:67:51:df:4c:5a (try 1/3) [87759.365715] wlp3s0: RX ReassocResp from 54:67:51:df:4c:5a (capab=0x511 status=0 aid=6) [87759.367676] wlp3s0: associated [87822.686707] wlp3s0: disconnect from AP 54:67:51:df:4c:5a for new auth to 54:67:51:df:4c:9b [87822.693426] wlp3s0: authenticate with 54:67:51:df:4c:9b [87822.697932] wlp3s0: send auth to 54:67:51:df:4c:9b (try 1/3) [87822.700737] wlp3s0: authenticated [87822.700930] wlp3s0: associating with AP with corrupt probe response [87822.704530] wlp3s0: associate with 54:67:51:df:4c:9b (try 1/3) [87822.708717] wlp3s0: RX ReassocResp from 54:67:51:df:4c:9b (capab=0x411 status=17 aid=1) [87822.708722] wlp3s0: 54:67:51:df:4c:9b denied association (code=17) [87822.854759] wlp3s0: authenticate with 54:67:51:df:4c:5a [87822.859639] wlp3s0: send auth to 54:67:51:df:4c:5a (try 1/3) [87822.862254] wlp3s0: authenticated [87822.864486] wlp3s0: associate with 54:67:51:df:4c:5a (try 1/3) [87822.901303] wlp3s0: RX AssocResp from 54:67:51:df:4c:5a (capab=0x511 status=0 aid=6) [87822.903578] wlp3s0: associated [87854.217295] wlp3s0: disconnect from AP 54:67:51:df:4c:5a for new auth to 54:67:51:df:4c:9b [87854.224283] wlp3s0: authenticate with 54:67:51:df:4c:9b [87854.229599] wlp3s0: send auth to 54:67:51:df:4c:9b (try 1/3) [87854.232566] wlp3s0: authenticated [87854.232854] wlp3s0: associating with AP with corrupt probe response [87854.236866] wlp3s0: associate with 54:67:51:df:4c:9b (try 1/3) [87854.241107] wlp3s0: RX ReassocResp from 54:67:51:df:4c:9b (capab=0x411 status=17 aid=1) [87854.241112] wlp3s0: 54:67:51:df:4c:9b denied association (code=17) [87854.383835] wlp3s0: authenticate with 54:67:51:df:4c:5a [87854.389281] wlp3s0: send auth to 54:67:51:df:4c:5a (try 1/3) [87854.390621] wlp3s0: authenticated [87854.391958] wlp3s0: associate with 54:67:51:df:4c:5a (try 1/3) [87854.428733] wlp3s0: RX AssocResp from 54:67:51:df:4c:5a (capab=0x511 status=0 aid=6) [87854.430778] wlp3s0: associated [87885.770183] wlp3s0: disconnect from AP 54:67:51:df:4c:5a for new auth to 54:67:51:df:4c:9b [87885.776890] wlp3s0: authenticate with 54:67:51:df:4c:9b [87885.782395] wlp3s0: send auth to 54:67:51:df:4c:9b (try 1/3) [87885.784951] wlp3s0: authenticated [87885.785183] wlp3s0: associating with AP with corrupt probe response [87885.788039] wlp3s0: associate with 54:67:51:df:4c:9b (try 1/3) [87885.792239] wlp3s0: RX ReassocResp from 54:67:51:df:4c:9b (capab=0x411 status=17 aid=1) [87885.792243] wlp3s0: 54:67:51:df:4c:9b denied association (code=17) [87885.945776] wlp3s0: authenticate with 54:67:51:df:4c:5a [87885.951912] wlp3s0: send auth to 54:67:51:df:4c:5a (try 1/3) [87885.953244] wlp3s0: authenticated [87885.955236] wlp3s0: associate with 54:67:51:df:4c:5a (try 1/3) [87885.991999] wlp3s0: RX AssocResp from 54:67:51:df:4c:5a (capab=0x511 status=0 aid=6) [87885.994478] wlp3s0: associated [88014.560274] wlp3s0: disconnect from AP 54:67:51:df:4c:5a for new auth to 54:67:51:df:4c:9b [88014.567203] wlp3s0: authenticate with 54:67:51:df:4c:9b [88014.571851] wlp3s0: send auth to 54:67:51:df:4c:9b (try 1/3) [88014.576075] wlp3s0: authenticated [88014.576245] wlp3s0: associating with AP with corrupt probe response [88014.577338] wlp3s0: associate with 54:67:51:df:4c:9b (try 1/3) [88014.581560] wlp3s0: RX ReassocResp from 54:67:51:df:4c:9b (capab=0x411 status=17 aid=1) [88014.581574] wlp3s0: 54:67:51:df:4c:9b denied association (code=17) [88014.728721] wlp3s0: authenticate with 54:67:51:df:4c:5a [88014.734541] wlp3s0: send auth to 54:67:51:df:4c:5a (try 1/3) [88014.737153] wlp3s0: authenticated [88014.740685] wlp3s0: associate with 54:67:51:df:4c:5a (try 1/3) [88014.782477] wlp3s0: RX AssocResp from 54:67:51:df:4c:5a (capab=0x511 status=0 aid=6) [88014.784396] wlp3s0: associated [88049.331682] wlp3s0: disconnect from AP 54:67:51:df:4c:5a for new auth to 54:67:51:df:4c:9b [88049.338267] wlp3s0: authenticate with 54:67:51:df:4c:9b [88049.342615] wlp3s0: send auth to 54:67:51:df:4c:9b (try 1/3) [88049.345398] wlp3s0: authenticated [88049.345607] wlp3s0: associating with AP with corrupt probe response [88049.348436] wlp3s0: associate with 54:67:51:df:4c:9b (try 1/3) [88049.352693] wlp3s0: RX ReassocResp from 54:67:51:df:4c:9b (capab=0x411 status=17 aid=1) [88049.352698] wlp3s0: 54:67:51:df:4c:9b denied association (code=17) [88049.507599] wlp3s0: authenticate with 54:67:51:df:4c:5a [88049.513058] wlp3s0: send auth to 54:67:51:df:4c:5a (try 1/3) [88049.515733] wlp3s0: authenticated [88049.516283] wlp3s0: associate with 54:67:51:df:4c:5a (try 1/3) [88049.553056] wlp3s0: RX AssocResp from 54:67:51:df:4c:5a (capab=0x511 status=0 aid=6) [88049.555550] wlp3s0: associated [88080.926261] wlp3s0: disconnect from AP 54:67:51:df:4c:5a for new auth to 54:67:51:df:4c:9b [88080.931551] wlp3s0: authenticate with 54:67:51:df:4c:9b [88080.935345] wlp3s0: send auth to 54:67:51:df:4c:9b (try 1/3) [88080.938219] wlp3s0: authenticated [88080.939710] wlp3s0: associating with AP with corrupt probe response [88080.939739] wlp3s0: associate with 54:67:51:df:4c:9b (try 1/3) [88080.944109] wlp3s0: RX ReassocResp from 54:67:51:df:4c:9b (capab=0x411 status=17 aid=1) [88080.944114] wlp3s0: 54:67:51:df:4c:9b denied association (code=17) [88081.096065] wlp3s0: authenticate with 54:67:51:df:4c:5a [88081.100846] wlp3s0: send auth to 54:67:51:df:4c:5a (try 1/3) [88081.103178] wlp3s0: authenticated [88081.104743] wlp3s0: associate with 54:67:51:df:4c:5a (try 1/3) [88081.136429] wlp3s0: RX AssocResp from 54:67:51:df:4c:5a (capab=0x511 status=0 aid=6) [88081.138149] wlp3s0: associated [88209.446764] wlp3s0: disconnect from AP 54:67:51:df:4c:5a for new auth to 54:67:51:df:4c:9b [88209.452032] wlp3s0: authenticate with 54:67:51:df:4c:9b [88209.456231] wlp3s0: send auth to 54:67:51:df:4c:9b (try 1/3) [88209.459531] wlp3s0: authenticated [88209.459841] wlp3s0: associating with AP with corrupt probe response [88209.461711] wlp3s0: associate with 54:67:51:df:4c:9b (try 1/3) [88209.466044] wlp3s0: RX ReassocResp from 54:67:51:df:4c:9b (capab=0x411 status=17 aid=1) [88209.466048] wlp3s0: 54:67:51:df:4c:9b denied association (code=17) [88209.623211] wlp3s0: authenticate with 54:67:51:df:4c:5a [88209.628460] wlp3s0: send auth to 54:67:51:df:4c:5a (try 1/3) [88209.631838] wlp3s0: authenticated [88209.633861] wlp3s0: associate with 54:67:51:df:4c:5a (try 1/3) [88209.665574] wlp3s0: RX AssocResp from 54:67:51:df:4c:5a (capab=0x511 status=0 aid=6) [88209.667833] wlp3s0: associated [88240.984201] wlp3s0: disconnect from AP 54:67:51:df:4c:5a for new auth to 54:67:51:df:4c:9b [88240.996707] wlp3s0: authenticate with 54:67:51:df:4c:9b [88241.000176] wlp3s0: send auth to 54:67:51:df:4c:9b (try 1/3) [88241.005385] wlp3s0: authenticated [88241.005616] wlp3s0: associating with AP with corrupt probe response [88241.009274] wlp3s0: associate with 54:67:51:df:4c:9b (try 1/3) [88241.013475] wlp3s0: RX ReassocResp from 54:67:51:df:4c:9b (capab=0x411 status=17 aid=1) [88241.013479] wlp3s0: 54:67:51:df:4c:9b denied association (code=17) [88241.170790] wlp3s0: authenticate with 54:67:51:df:4c:5a [88241.175387] wlp3s0: send auth to 54:67:51:df:4c:5a (try 1/3) [88241.178652] wlp3s0: authenticated [88241.181279] wlp3s0: associate with 54:67:51:df:4c:5a (try 1/3) [88241.213353] wlp3s0: RX AssocResp from 54:67:51:df:4c:5a (capab=0x511 status=0 aid=6) [88241.215528] wlp3s0: associated [88335.208241] wlp3s0: disconnect from AP 54:67:51:df:4c:5a for new auth to 54:67:51:df:4c:9b [88335.214267] wlp3s0: authenticate with 54:67:51:df:4c:9b [88335.218950] wlp3s0: send auth to 54:67:51:df:4c:9b (try 1/3) [88335.221582] wlp3s0: authenticated [88335.221935] wlp3s0: associating with AP with corrupt probe response [88335.225226] wlp3s0: associate with 54:67:51:df:4c:9b (try 1/3) [88335.231692] wlp3s0: RX ReassocResp from 54:67:51:df:4c:9b (capab=0x411 status=17 aid=1) [88335.231697] wlp3s0: 54:67:51:df:4c:9b denied association (code=17) [88335.377478] wlp3s0: authenticate with 54:67:51:df:4c:5a [88335.382853] wlp3s0: send auth to 54:67:51:df:4c:5a (try 1/3) [88335.384445] wlp3s0: authenticated [88335.388030] wlp3s0: associate with 54:67:51:df:4c:5a (try 1/3) [88335.419942] wlp3s0: RX AssocResp from 54:67:51:df:4c:5a (capab=0x511 status=0 aid=6) [88335.422538] wlp3s0: associated [88369.950345] wlp3s0: disconnect from AP 54:67:51:df:4c:5a for new auth to 54:67:51:df:4c:9b [88369.957469] wlp3s0: authenticate with 54:67:51:df:4c:9b [88369.963048] wlp3s0: send auth to 54:67:51:df:4c:9b (try 1/3) [88369.966134] wlp3s0: authenticated [88369.966862] wlp3s0: associating with AP with corrupt probe response [88369.967783] wlp3s0: associate with 54:67:51:df:4c:9b (try 1/3) [88369.972007] wlp3s0: RX ReassocResp from 54:67:51:df:4c:9b (capab=0x411 status=17 aid=1) [88369.972011] wlp3s0: 54:67:51:df:4c:9b denied association (code=17) [88370.120664] wlp3s0: authenticate with 54:67:51:df:4c:5a [88370.126449] wlp3s0: send auth to 54:67:51:df:4c:5a (try 1/3) [88370.127853] wlp3s0: authenticated [88370.131564] wlp3s0: associate with 54:67:51:df:4c:5a (try 1/3) [88370.168527] wlp3s0: RX AssocResp from 54:67:51:df:4c:5a (capab=0x511 status=0 aid=6) [88370.171255] wlp3s0: associated [88401.446175] wlp3s0: disconnect from AP 54:67:51:df:4c:5a for new auth to 54:67:51:df:4c:9b [88401.451736] wlp3s0: authenticate with 54:67:51:df:4c:9b [88401.455791] wlp3s0: send auth to 54:67:51:df:4c:9b (try 1/3) [88401.460189] wlp3s0: authenticated [88401.460361] wlp3s0: associating with AP with corrupt probe response [88401.463172] wlp3s0: associate with 54:67:51:df:4c:9b (try 1/3) [88401.467399] wlp3s0: RX ReassocResp from 54:67:51:df:4c:9b (capab=0x411 status=17 aid=1) [88401.467403] wlp3s0: 54:67:51:df:4c:9b denied association (code=17) [88401.616773] wlp3s0: authenticate with 54:67:51:df:4c:5a [88401.623058] wlp3s0: send auth to 54:67:51:df:4c:5a (try 1/3) [88401.625515] wlp3s0: authenticated [88401.627161] wlp3s0: associate with 54:67:51:df:4c:5a (try 1/3) [88401.658941] wlp3s0: RX AssocResp from 54:67:51:df:4c:5a (capab=0x511 status=0 aid=6) [88401.660963] wlp3s0: associated [88433.293368] wlp3s0: disconnect from AP 54:67:51:df:4c:5a for new auth to 54:67:51:df:4c:9b [88433.299479] wlp3s0: authenticate with 54:67:51:df:4c:9b [88433.304020] wlp3s0: send auth to 54:67:51:df:4c:9b (try 1/3) [88433.309382] wlp3s0: authenticated [88433.309570] wlp3s0: associating with AP with corrupt probe response [88433.310774] wlp3s0: associate with 54:67:51:df:4c:9b (try 1/3) [88433.315021] wlp3s0: RX ReassocResp from 54:67:51:df:4c:9b (capab=0x411 status=17 aid=1) [88433.315025] wlp3s0: 54:67:51:df:4c:9b denied association (code=17) [88433.464111] wlp3s0: authenticate with 54:67:51:df:4c:5a [88433.469075] wlp3s0: send auth to 54:67:51:df:4c:5a (try 1/3) [88433.470840] wlp3s0: authenticated [88433.474778] wlp3s0: associate with 54:67:51:df:4c:5a (try 1/3) [88433.506908] wlp3s0: RX AssocResp from 54:67:51:df:4c:5a (capab=0x511 status=0 aid=6) [88433.509337] wlp3s0: associated [88496.514907] wlp3s0: disconnect from AP 54:67:51:df:4c:5a for new auth to 54:67:51:df:4c:9b [88496.520259] wlp3s0: authenticate with 54:67:51:df:4c:9b [88496.523735] wlp3s0: send auth to 54:67:51:df:4c:9b (try 1/3) [88496.527667] wlp3s0: authenticated [88496.527889] wlp3s0: associating with AP with corrupt probe response [88496.530119] wlp3s0: associate with 54:67:51:df:4c:9b (try 1/3) [88496.534327] wlp3s0: RX ReassocResp from 54:67:51:df:4c:9b (capab=0x411 status=17 aid=1) [88496.534333] wlp3s0: 54:67:51:df:4c:9b denied association (code=17) [88496.672555] wlp3s0: authenticate with 54:67:51:df:4c:5a [88496.677926] wlp3s0: send auth to 54:67:51:df:4c:5a (try 1/3) [88496.679907] wlp3s0: authenticated [88496.682153] wlp3s0: associate with 54:67:51:df:4c:5a (try 1/3) [88496.713769] wlp3s0: RX AssocResp from 54:67:51:df:4c:5a (capab=0x511 status=0 aid=6) [88496.715545] wlp3s0: associated [88528.224077] wlp3s0: disconnect from AP 54:67:51:df:4c:5a for new auth to 54:67:51:df:4c:9b [88528.231184] wlp3s0: authenticate with 54:67:51:df:4c:9b [88528.236415] wlp3s0: send auth to 54:67:51:df:4c:9b (try 1/3) [88528.240236] wlp3s0: authenticated [88528.240425] wlp3s0: associating with AP with corrupt probe response [88528.241688] wlp3s0: associate with 54:67:51:df:4c:9b (try 1/3) [88528.245917] wlp3s0: RX ReassocResp from 54:67:51:df:4c:9b (capab=0x411 status=17 aid=1) [88528.245921] wlp3s0: 54:67:51:df:4c:9b denied association (code=17) [88528.389224] wlp3s0: authenticate with 54:67:51:df:4c:5a [88528.393964] wlp3s0: send auth to 54:67:51:df:4c:5a (try 1/3) [88528.397429] wlp3s0: authenticated [88528.401613] wlp3s0: associate with 54:67:51:df:4c:5a (try 1/3) [88528.433847] wlp3s0: RX AssocResp from 54:67:51:df:4c:5a (capab=0x511 status=0 aid=6) [88528.435747] wlp3s0: associated [88559.876411] wlp3s0: disconnect from AP 54:67:51:df:4c:5a for new auth to 54:67:51:df:4c:9b [88559.890589] wlp3s0: authenticate with 54:67:51:df:4c:9b [88559.895265] wlp3s0: send auth to 54:67:51:df:4c:9b (try 1/3) [88559.898214] wlp3s0: authenticated [88559.898496] wlp3s0: associating with AP with corrupt probe response [88559.901265] wlp3s0: associate with 54:67:51:df:4c:9b (try 1/3) [88559.908153] wlp3s0: RX ReassocResp from 54:67:51:df:4c:9b (capab=0x411 status=17 aid=1) [88559.908157] wlp3s0: 54:67:51:df:4c:9b denied association (code=17) [88560.057643] wlp3s0: authenticate with 54:67:51:df:4c:5a [88560.061983] wlp3s0: send auth to 54:67:51:df:4c:5a (try 1/3) [88560.063508] wlp3s0: authenticated [88560.065475] wlp3s0: associate with 54:67:51:df:4c:5a (try 1/3) [88560.097176] wlp3s0: RX AssocResp from 54:67:51:df:4c:5a (capab=0x511 status=0 aid=6) [88560.099727] wlp3s0: associated [88591.605248] wlp3s0: disconnect from AP 54:67:51:df:4c:5a for new auth to 54:67:51:df:4c:9b [88591.610596] wlp3s0: authenticate with 54:67:51:df:4c:9b [88591.615060] wlp3s0: send auth to 54:67:51:df:4c:9b (try 1/3) [88591.619261] wlp3s0: authenticated [88591.619489] wlp3s0: associating with AP with corrupt probe response [88591.621200] wlp3s0: associate with 54:67:51:df:4c:9b (try 1/3) [88591.625392] wlp3s0: RX ReassocResp from 54:67:51:df:4c:9b (capab=0x411 status=17 aid=1) [88591.625396] wlp3s0: 54:67:51:df:4c:9b denied association (code=17) [88591.787082] wlp3s0: authenticate with 54:67:51:df:4c:5a [88591.792897] wlp3s0: send auth to 54:67:51:df:4c:5a (try 1/3) [88591.794402] wlp3s0: authenticated [88591.796931] wlp3s0: associate with 54:67:51:df:4c:5a (try 1/3) [88591.828685] wlp3s0: RX AssocResp from 54:67:51:df:4c:5a (capab=0x511 status=0 aid=6) [88591.831356] wlp3s0: associated [88751.670245] wlp3s0: disconnect from AP 54:67:51:df:4c:5a for new auth to 54:67:51:df:4c:9b [88751.679118] wlp3s0: authenticate with 54:67:51:df:4c:9b [88751.683494] wlp3s0: send auth to 54:67:51:df:4c:9b (try 1/3) [88751.687663] wlp3s0: authenticated [88751.688216] wlp3s0: associating with AP with corrupt probe response [88751.690992] wlp3s0: associate with 54:67:51:df:4c:9b (try 1/3) [88751.695222] wlp3s0: RX ReassocResp from 54:67:51:df:4c:9b (capab=0x411 status=17 aid=1) [88751.695226] wlp3s0: 54:67:51:df:4c:9b denied association (code=17) [88751.843361] wlp3s0: authenticate with 54:67:51:df:4c:5a [88751.850305] wlp3s0: send auth to 54:67:51:df:4c:5a (try 1/3) [88751.853874] wlp3s0: authenticated [88751.854988] wlp3s0: associate with 54:67:51:df:4c:5a (try 1/3) [88751.886701] wlp3s0: RX AssocResp from 54:67:51:df:4c:5a (capab=0x511 status=0 aid=6) [88751.888650] wlp3s0: associated [88814.822995] wlp3s0: disconnect from AP 54:67:51:df:4c:5a for new auth to 54:67:51:df:4c:9b [88814.831691] wlp3s0: authenticate with 54:67:51:df:4c:9b [88814.835635] wlp3s0: send auth to 54:67:51:df:4c:9b (try 1/3) [88814.839718] wlp3s0: authenticated [88814.839922] wlp3s0: associating with AP with corrupt probe response [88814.840123] wlp3s0: associate with 54:67:51:df:4c:9b (try 1/3) [88814.844489] wlp3s0: RX ReassocResp from 54:67:51:df:4c:9b (capab=0x411 status=17 aid=1) [88814.844493] wlp3s0: 54:67:51:df:4c:9b denied association (code=17) [88815.006667] wlp3s0: authenticate with 54:67:51:df:4c:5a [88815.012315] wlp3s0: send auth to 54:67:51:df:4c:5a (try 1/3) [88815.014344] wlp3s0: authenticated [88815.016025] wlp3s0: associate with 54:67:51:df:4c:5a (try 1/3) [88815.053140] wlp3s0: RX AssocResp from 54:67:51:df:4c:5a (capab=0x511 status=0 aid=6) [88815.055968] wlp3s0: associated [88912.119543] wlp3s0: disconnect from AP 54:67:51:df:4c:5a for new auth to 54:67:51:df:4c:9b [88912.125282] wlp3s0: authenticate with 54:67:51:df:4c:9b [88912.129067] wlp3s0: send auth to 54:67:51:df:4c:9b (try 1/3) [88912.133665] wlp3s0: authenticated [88912.133901] wlp3s0: associating with AP with corrupt probe response [88912.137660] wlp3s0: associate with 54:67:51:df:4c:9b (try 1/3) [88912.142018] wlp3s0: RX ReassocResp from 54:67:51:df:4c:9b (capab=0x411 status=17 aid=1) [88912.142028] wlp3s0: 54:67:51:df:4c:9b denied association (code=17) [88912.291320] wlp3s0: authenticate with 54:67:51:df:4c:5a [88912.297316] wlp3s0: send auth to 54:67:51:df:4c:5a (try 1/3) [88912.299116] wlp3s0: authenticated [88912.301427] wlp3s0: associate with 54:67:51:df:4c:5a (try 1/3) [88912.333232] wlp3s0: RX AssocResp from 54:67:51:df:4c:5a (capab=0x511 status=0 aid=6) [88912.335715] wlp3s0: associated [88943.576276] wlp3s0: disconnect from AP 54:67:51:df:4c:5a for new auth to 54:67:51:df:4c:9b [88943.581980] wlp3s0: authenticate with 54:67:51:df:4c:9b [88943.586761] wlp3s0: send auth to 54:67:51:df:4c:9b (try 1/3) [88943.590329] wlp3s0: authenticated [88943.590518] wlp3s0: associating with AP with corrupt probe response [88943.593594] wlp3s0: associate with 54:67:51:df:4c:9b (try 1/3) [88943.597896] wlp3s0: RX ReassocResp from 54:67:51:df:4c:9b (capab=0x411 status=17 aid=1) [88943.597900] wlp3s0: 54:67:51:df:4c:9b denied association (code=17) [88943.751415] wlp3s0: authenticate with 54:67:51:df:4c:5a [88943.756986] wlp3s0: send auth to 54:67:51:df:4c:5a (try 1/3) [88943.759571] wlp3s0: authenticated [88943.765592] wlp3s0: associate with 54:67:51:df:4c:5a (try 1/3) [88943.797790] wlp3s0: RX AssocResp from 54:67:51:df:4c:5a (capab=0x511 status=0 aid=6) [88943.800495] wlp3s0: associated [89009.605230] wlp3s0: disconnect from AP 54:67:51:df:4c:5a for new auth to 54:67:51:df:4c:9b [89009.619235] wlp3s0: authenticate with 54:67:51:df:4c:9b [89009.623590] wlp3s0: send auth to 54:67:51:df:4c:9b (try 1/3) [89009.629319] wlp3s0: authenticated [89009.630034] wlp3s0: associating with AP with corrupt probe response [89009.630570] wlp3s0: associate with 54:67:51:df:4c:9b (try 1/3) [89009.634800] wlp3s0: RX ReassocResp from 54:67:51:df:4c:9b (capab=0x411 status=17 aid=1) [89009.634804] wlp3s0: 54:67:51:df:4c:9b denied association (code=17) [89009.792071] wlp3s0: authenticate with 54:67:51:df:4c:5a [89009.797155] wlp3s0: send auth to 54:67:51:df:4c:5a (try 1/3) [89009.802364] wlp3s0: authenticated [89009.810195] wlp3s0: associate with 54:67:51:df:4c:5a (try 1/3) [89009.847136] wlp3s0: RX AssocResp from 54:67:51:df:4c:5a (capab=0x511 status=0 aid=6) [89009.867489] wlp3s0: associated [89018.930020] wlp3s0: deauthenticating from 54:67:51:df:4c:5a by local choice (Reason: 3=DEAUTH_LEAVING) [89018.974239] Virtual device wlp3s0 asks to queue packet! [89023.289296] PM: suspend entry (deep) [89023.298608] Filesystems sync: 0.009 seconds [89023.299119] Freezing user space processes ... (elapsed 0.002 seconds) done. [89023.301963] OOM killer disabled. [89023.301963] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [89023.303363] printk: Suspending console(s) (use no_console_suspend to debug) [89023.356498] e1000e: EEE TX LPI TIMER: 00000011 [89023.366477] sd 0:0:0:0: [sda] Synchronizing SCSI cache [89023.366722] sd 0:0:0:0: [sda] Stopping disk [89023.487255] ACPI: EC: interrupt blocked [89023.527059] ACPI: Preparing to enter system sleep state S3 [89023.532612] ACPI: EC: event blocked [89023.532614] ACPI: EC: EC stopped [89023.532616] PM: Saving platform NVS memory [89023.532643] Disabling non-boot CPUs ... [89023.533367] IRQ 47: no longer affine to CPU1 [89023.535176] smpboot: CPU 1 is now offline [89023.538249] IRQ 52: no longer affine to CPU2 [89023.539353] smpboot: CPU 2 is now offline [89023.542372] IRQ 42: no longer affine to CPU3 [89023.543397] smpboot: CPU 3 is now offline [89023.547031] ACPI: Low-level resume complete [89023.547079] ACPI: EC: EC started [89023.547079] PM: Restoring platform NVS memory [89023.549509] Enabling non-boot CPUs ... [89023.549552] x86: Booting SMP configuration: [89023.549553] smpboot: Booting Node 0 Processor 1 APIC 0x1 [89023.550195] CPU1 is up [89023.550223] smpboot: Booting Node 0 Processor 2 APIC 0x2 [89023.551964] CPU2 is up [89023.551989] smpboot: Booting Node 0 Processor 3 APIC 0x3 [89023.552867] CPU3 is up [89023.556224] ACPI: Waking up from system sleep state S3 [89023.563988] ACPI: EC: interrupt unblocked [89023.609801] ACPI: EC: event unblocked [89023.620137] sd 0:0:0:0: [sda] Starting disk [89023.899867] usb 2-8: reset high-speed USB device number 3 using xhci_hcd [89023.922983] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [89023.923054] ata1.00: LPM support broken, forcing max_power [89023.923225] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [89023.923226] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [89023.923228] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [89023.923388] ata1.00: LPM support broken, forcing max_power [89023.923557] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [89023.923559] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [89023.923561] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [89023.923624] ata1.00: configured for UDMA/133 [89024.176142] usb 2-7: reset full-speed USB device number 14 using xhci_hcd [89024.326448] acpi LNXPOWER:02: Turning OFF [89024.326899] OOM killer enabled. [89024.326901] Restarting tasks ... [89024.340774] Bluetooth: hci0: read Intel version: 370810011003110e00 [89024.340780] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq [89024.341035] done. [89024.365778] thermal thermal_zone2: failed to read out thermal zone (-61) [89024.385730] PM: suspend exit [89024.570719] e1000e: enp0s25 NIC Link is Down [89024.639778] Bluetooth: hci0: unexpected event for opcode 0xfc2f [89024.656779] Bluetooth: hci0: Intel firmware patch completed and activated [89024.780575] iwlwifi 0000:03:00.0: Applying debug destination EXTERNAL_DRAM [89024.859944] iwlwifi 0000:03:00.0: Applying debug destination EXTERNAL_DRAM [89024.861596] iwlwifi 0000:03:00.0: FW already configured (0) - re-configuring [89028.558140] wlp3s0: authenticate with 54:67:51:df:4c:5a [89028.564581] wlp3s0: send auth to 54:67:51:df:4c:5a (try 1/3) [89028.586175] wlp3s0: authenticated [89028.587827] wlp3s0: associate with 54:67:51:df:4c:5a (try 1/3) [89028.619495] wlp3s0: RX AssocResp from 54:67:51:df:4c:5a (capab=0x511 status=0 aid=3) [89028.640639] wlp3s0: associated [89028.694354] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [89272.857173] wlp3s0: disconnect from AP 54:67:51:df:4c:5a for new auth to 54:67:51:df:4c:9b [89272.864656] wlp3s0: authenticate with 54:67:51:df:4c:9b [89272.868844] wlp3s0: send auth to 54:67:51:df:4c:9b (try 1/3) [89272.871685] wlp3s0: authenticated [89272.872157] wlp3s0: associating with AP with corrupt probe response [89272.873906] wlp3s0: associate with 54:67:51:df:4c:9b (try 1/3) [89272.878105] wlp3s0: RX ReassocResp from 54:67:51:df:4c:9b (capab=0x411 status=17 aid=1) [89272.878111] wlp3s0: 54:67:51:df:4c:9b denied association (code=17) [89273.031576] wlp3s0: authenticate with 54:67:51:df:4c:5a [89273.037695] wlp3s0: send auth to 54:67:51:df:4c:5a (try 1/3) [89273.039125] wlp3s0: authenticated [89273.040778] wlp3s0: associate with 54:67:51:df:4c:5a (try 1/3) [89273.077659] wlp3s0: RX AssocResp from 54:67:51:df:4c:5a (capab=0x511 status=0 aid=3) [89273.080121] wlp3s0: associated [89950.110551] wlp3s0: deauthenticating from 54:67:51:df:4c:5a by local choice (Reason: 3=DEAUTH_LEAVING) [89953.721488] iwlwifi 0000:03:00.0: Applying debug destination EXTERNAL_DRAM [89953.801121] iwlwifi 0000:03:00.0: Applying debug destination EXTERNAL_DRAM [89953.802717] iwlwifi 0000:03:00.0: FW already configured (0) - re-configuring [89957.438865] wlp3s0: authenticate with 54:67:51:df:4c:5a [89957.444374] wlp3s0: send auth to 54:67:51:df:4c:5a (try 1/3) [89957.466164] wlp3s0: authenticated [89957.466827] wlp3s0: associate with 54:67:51:df:4c:5a (try 1/3) [89957.498663] wlp3s0: RX AssocResp from 54:67:51:df:4c:5a (capab=0x511 status=0 aid=3) [89957.502031] wlp3s0: associated [89957.570730] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [90006.607605] usb 2-7: USB disconnect, device number 14 [99418.420482] wlp3s0: deauthenticating from 54:67:51:df:4c:5a by local choice (Reason: 3=DEAUTH_LEAVING) [99423.222323] PM: suspend entry (deep) [99423.236725] Filesystems sync: 0.014 seconds [99423.237348] Freezing user space processes ... (elapsed 0.002 seconds) done. [99423.239855] OOM killer disabled. [99423.239856] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [99423.241203] printk: Suspending console(s) (use no_console_suspend to debug) [99423.296016] sd 0:0:0:0: [sda] Synchronizing SCSI cache [99423.296258] sd 0:0:0:0: [sda] Stopping disk [99423.300223] e1000e: EEE TX LPI TIMER: 00000011 [99423.400632] ACPI: EC: interrupt blocked [99423.440322] ACPI: Preparing to enter system sleep state S3 [99423.445437] ACPI: EC: event blocked [99423.445439] ACPI: EC: EC stopped [99423.445440] PM: Saving platform NVS memory [99423.445465] Disabling non-boot CPUs ... [99423.446127] IRQ 47: no longer affine to CPU1 [99423.447939] smpboot: CPU 1 is now offline [99423.451092] IRQ 52: no longer affine to CPU2 [99423.452192] smpboot: CPU 2 is now offline [99423.456314] smpboot: CPU 3 is now offline [99423.459872] ACPI: Low-level resume complete [99423.459919] ACPI: EC: EC started [99423.459920] PM: Restoring platform NVS memory [99423.462328] Enabling non-boot CPUs ... [99423.462369] x86: Booting SMP configuration: [99423.462370] smpboot: Booting Node 0 Processor 1 APIC 0x1 [99423.463014] CPU1 is up [99423.463042] smpboot: Booting Node 0 Processor 2 APIC 0x2 [99423.464756] CPU2 is up [99423.464781] smpboot: Booting Node 0 Processor 3 APIC 0x3 [99423.465666] CPU3 is up [99423.468964] ACPI: Waking up from system sleep state S3 [99423.476798] ACPI: EC: interrupt unblocked [99423.519978] ACPI: EC: event unblocked [99423.530227] sd 0:0:0:0: [sda] Starting disk [99423.809230] usb 2-8: reset high-speed USB device number 3 using xhci_hcd [99423.836354] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [99423.836430] ata1.00: LPM support broken, forcing max_power [99423.836570] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [99423.836571] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [99423.836572] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [99423.836694] ata1.00: LPM support broken, forcing max_power [99423.836807] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [99423.836809] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [99423.836810] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [99423.836876] ata1.00: configured for UDMA/133 [99423.964368] acpi LNXPOWER:02: Turning OFF [99423.964616] OOM killer enabled. [99423.964617] Restarting tasks ... done. [99423.976459] thermal thermal_zone2: failed to read out thermal zone (-61) [99423.995014] PM: suspend exit [99424.183983] e1000e: enp0s25 NIC Link is Down [99424.397676] iwlwifi 0000:03:00.0: Applying debug destination EXTERNAL_DRAM [99424.481497] iwlwifi 0000:03:00.0: Applying debug destination EXTERNAL_DRAM [99424.482815] iwlwifi 0000:03:00.0: FW already configured (0) - re-configuring [99428.195513] wlp3s0: authenticate with 54:67:51:df:4c:5a [99428.201464] wlp3s0: send auth to 54:67:51:df:4c:5a (try 1/3) [99428.222737] wlp3s0: authenticated [99428.225035] wlp3s0: associate with 54:67:51:df:4c:5a (try 1/3) [99428.256716] wlp3s0: RX AssocResp from 54:67:51:df:4c:5a (capab=0x511 status=0 aid=5) [99428.258656] wlp3s0: associated [99428.289717] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [101559.923895] usb 2-2: USB disconnect, device number 13 [101562.027366] wlp3s0: deauthenticating from 54:67:51:df:4c:5a by local choice (Reason: 3=DEAUTH_LEAVING) [101567.209975] PM: suspend entry (deep) [101567.224974] Filesystems sync: 0.014 seconds [101567.225484] Freezing user space processes ... (elapsed 0.002 seconds) done. [101567.228302] OOM killer disabled. [101567.228303] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [101567.229736] printk: Suspending console(s) (use no_console_suspend to debug) [101567.317627] e1000e: EEE TX LPI TIMER: 00000011 [101567.320648] sd 0:0:0:0: [sda] Synchronizing SCSI cache [101567.320817] sd 0:0:0:0: [sda] Stopping disk [101567.417626] ACPI: EC: interrupt blocked [101567.457267] ACPI: Preparing to enter system sleep state S3 [101567.462494] ACPI: EC: event blocked [101567.462495] ACPI: EC: EC stopped [101567.462497] PM: Saving platform NVS memory [101567.462522] Disabling non-boot CPUs ... [101567.463163] IRQ 47: no longer affine to CPU1 [101567.464973] smpboot: CPU 1 is now offline [101567.468039] IRQ 52: no longer affine to CPU2 [101567.469701] smpboot: CPU 2 is now offline [101567.471796] IRQ 18: no longer affine to CPU3 [101567.471802] IRQ 42: no longer affine to CPU3 [101567.472844] smpboot: CPU 3 is now offline [101567.475738] ACPI: Low-level resume complete [101567.475785] ACPI: EC: EC started [101567.475786] PM: Restoring platform NVS memory [101567.478204] Enabling non-boot CPUs ... [101567.478247] x86: Booting SMP configuration: [101567.478248] smpboot: Booting Node 0 Processor 1 APIC 0x1 [101567.478890] CPU1 is up [101567.478918] smpboot: Booting Node 0 Processor 2 APIC 0x2 [101567.480631] CPU2 is up [101567.480656] smpboot: Booting Node 0 Processor 3 APIC 0x3 [101567.481537] CPU3 is up [101567.484895] ACPI: Waking up from system sleep state S3 [101567.496618] ACPI: EC: interrupt unblocked [101567.540282] ACPI: EC: event unblocked [101567.543069] sd 0:0:0:0: [sda] Starting disk [101567.774213] usb 2-8: reset high-speed USB device number 3 using xhci_hcd [101567.852898] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [101567.852959] ata1.00: LPM support broken, forcing max_power [101567.853146] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [101567.853149] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [101567.853150] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [101567.853281] ata1.00: LPM support broken, forcing max_power [101567.853418] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [101567.853420] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [101567.853421] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [101567.853486] ata1.00: configured for UDMA/133 [101567.928689] acpi LNXPOWER:02: Turning OFF [101567.928968] OOM killer enabled. [101567.928969] Restarting tasks ... done. [101567.938755] thermal thermal_zone2: failed to read out thermal zone (-61) [101567.968444] PM: suspend exit [101568.140900] e1000e: enp0s25 NIC Link is Down [101568.350412] iwlwifi 0000:03:00.0: Applying debug destination EXTERNAL_DRAM [101568.435463] iwlwifi 0000:03:00.0: Applying debug destination EXTERNAL_DRAM [101568.436917] iwlwifi 0000:03:00.0: FW already configured (0) - re-configuring [101572.162844] wlp3s0: authenticate with 08:6a:0a:42:c0:d9 [101572.167720] wlp3s0: send auth to 08:6a:0a:42:c0:d9 (try 1/3) [101572.169423] wlp3s0: authenticated [101572.169978] wlp3s0: associate with 08:6a:0a:42:c0:d9 (try 1/3) [101572.170989] wlp3s0: RX AssocResp from 08:6a:0a:42:c0:d9 (capab=0x1011 status=0 aid=2) [101572.172402] wlp3s0: associated [101572.197582] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [101572.213788] wlp3s0: Limiting TX power to 24 (24 - 0) dBm as advertised by 08:6a:0a:42:c0:d9 [101578.701926] usb 2-2: new full-speed USB device number 15 using xhci_hcd [101578.855657] usb 2-2: New USB device found, idVendor=056a, idProduct=0374, bcdDevice= 1.11 [101578.855663] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [101578.855666] usb 2-2: Product: Intuos S [101578.855669] usb 2-2: Manufacturer: Wacom Co.,Ltd. [101578.855672] usb 2-2: SerialNumber: 0FH00R2007575 [101578.864711] input: Wacom Intuos S Pen as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/0003:056A:0374.0012/input/input65 [101578.922429] input: Wacom Intuos S Pad as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/0003:056A:0374.0012/input/input67 [101578.922918] wacom 0003:056A:0374.0012: hidraw0: USB HID v1.10 Device [Wacom Co.,Ltd. Intuos S] on usb-0000:00:14.0-2/input0 [102937.006373] wlp3s0: deauthenticating from 08:6a:0a:42:c0:d9 by local choice (Reason: 3=DEAUTH_LEAVING) [102941.217576] PM: suspend entry (deep) [102941.231459] Filesystems sync: 0.013 seconds [102941.231980] Freezing user space processes ... (elapsed 0.002 seconds) done. [102941.234889] OOM killer disabled. [102941.234889] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [102941.236378] printk: Suspending console(s) (use no_console_suspend to debug) [102941.291490] sd 0:0:0:0: [sda] Synchronizing SCSI cache [102941.291734] sd 0:0:0:0: [sda] Stopping disk [102941.299364] e1000e: EEE TX LPI TIMER: 00000011 [102941.395860] ACPI: EC: interrupt blocked [102941.435719] ACPI: Preparing to enter system sleep state S3 [102941.439778] ACPI: EC: event blocked [102941.439779] ACPI: EC: EC stopped [102941.439780] PM: Saving platform NVS memory [102941.439799] Disabling non-boot CPUs ... [102941.440252] IRQ 47: no longer affine to CPU1 [102941.441969] smpboot: CPU 1 is now offline [102941.444555] IRQ 52: no longer affine to CPU2 [102941.445621] smpboot: CPU 2 is now offline [102941.447843] IRQ 18: no longer affine to CPU3 [102941.447849] IRQ 42: no longer affine to CPU3 [102941.448868] smpboot: CPU 3 is now offline [102941.451900] ACPI: Low-level resume complete [102941.451948] ACPI: EC: EC started [102941.451949] PM: Restoring platform NVS memory [102941.454350] Enabling non-boot CPUs ... [102941.454392] x86: Booting SMP configuration: [102941.454392] smpboot: Booting Node 0 Processor 1 APIC 0x1 [102941.455033] CPU1 is up [102941.455061] smpboot: Booting Node 0 Processor 2 APIC 0x2 [102941.456785] CPU2 is up [102941.456812] smpboot: Booting Node 0 Processor 3 APIC 0x3 [102941.457589] CPU3 is up [102941.460914] ACPI: Waking up from system sleep state S3 [102941.469133] ACPI: EC: interrupt unblocked [102941.514875] ACPI: EC: event unblocked [102941.521671] sd 0:0:0:0: [sda] Starting disk [102941.804790] usb 2-8: reset high-speed USB device number 3 using xhci_hcd [102941.827598] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [102941.827660] ata1.00: LPM support broken, forcing max_power [102941.827848] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [102941.827850] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [102941.827852] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [102941.827985] ata1.00: LPM support broken, forcing max_power [102941.828130] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [102941.828132] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [102941.828134] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [102941.828201] ata1.00: configured for UDMA/133 [102941.960072] acpi LNXPOWER:02: Turning OFF [102941.960350] OOM killer enabled. [102941.960351] Restarting tasks ... done. [102941.979209] thermal thermal_zone2: failed to read out thermal zone (-61) [102942.001506] PM: suspend exit [102942.199497] e1000e: enp0s25 NIC Link is Down [102942.415379] iwlwifi 0000:03:00.0: Applying debug destination EXTERNAL_DRAM [102942.421772] input: Wacom Intuos S Pen as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/0003:056A:0374.0013/input/input68 [102942.484851] input: Wacom Intuos S Pad as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/0003:056A:0374.0013/input/input70 [102942.485200] wacom 0003:056A:0374.0013: hidraw0: USB HID v1.10 Device [Wacom Co.,Ltd. Intuos S] on usb-0000:00:14.0-2/input0 [102942.510656] iwlwifi 0000:03:00.0: Applying debug destination EXTERNAL_DRAM [102942.511939] iwlwifi 0000:03:00.0: FW already configured (0) - re-configuring [102946.135934] wlp3s0: authenticate with 08:6a:0a:42:c0:d9 [102946.141684] wlp3s0: send auth to 08:6a:0a:42:c0:d9 (try 1/3) [102946.144083] wlp3s0: authenticated [102946.144628] wlp3s0: associate with 08:6a:0a:42:c0:d9 (try 1/3) [102946.146087] wlp3s0: RX AssocResp from 08:6a:0a:42:c0:d9 (capab=0x1011 status=0 aid=1) [102946.148153] wlp3s0: associated [102946.165067] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [102946.193982] wlp3s0: Limiting TX power to 24 (24 - 0) dBm as advertised by 08:6a:0a:42:c0:d9 [105414.702816] usb 2-2: USB disconnect, device number 15