[ 0.000000] Linux version 4.15.0-46-generic (buildd@lgw01-amd64-028) (gcc version 7.3.0 (Ubuntu 7.3.0-16ubuntu3)) #49-Ubuntu SMP Wed Feb 6 09:34:06 UTC 2019 (Ubuntu 4.15.0-46.49-generic 4.15.18) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000ddbffbff] usable [ 0.000000] BIOS-e820: [mem 0x00000000ddbffc00-0x00000000ddc53bff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000ddc53c00-0x00000000ddc55bff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000ddc55c00-0x00000000dfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fed003ff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed9ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000117ffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.5 present. [ 0.000000] DMI: Dell Inc. OptiPlex 760 /0M858N, BIOS A11 02/24/2011 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x118000 max_arch_pfn = 0x1000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0DDE00000 mask FFFE00000 uncachable [ 0.000000] 1 base 0DE000000 mask FFE000000 uncachable [ 0.000000] 2 base 0DDD00000 mask FFFF00000 uncachable [ 0.000000] 3 base 0E0000000 mask FE0000000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000000] found SMP MP-table at [mem 0x000fe710-0x000fe71f] mapped at [(ptrval)] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] initial memory mapped: [mem 0x00000000-0x0b3fffff] [ 0.000000] Base memory trampoline at [(ptrval)] 9b000 size 16384 [ 0.000000] BRK [0x0af42000, 0x0af42fff] PGTABLE [ 0.000000] BRK [0x0af43000, 0x0af43fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x31ce3000-0x34e68fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000FEC00 000024 (v02 DELL ) [ 0.000000] ACPI: XSDT 0x00000000000FC91B 00006C (v01 DELL B10K 00000015 ASL 00000061) [ 0.000000] ACPI: FACP 0x00000000000FCA43 0000F4 (v03 DELL B10K 00000015 ASL 00000061) [ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/64 (20170831/tbfadt-603) [ 0.000000] ACPI: DSDT 0x00000000FFF1CE65 005655 (v01 DELL dt_ex 00001000 INTL 20050624) [ 0.000000] ACPI: FACS 0x00000000DDBFFC00 000040 [ 0.000000] ACPI: FACS 0x00000000DDBFFC00 000040 [ 0.000000] ACPI: SSDT 0x00000000FFF225D9 0000AA (v01 DELL st_ex 00001000 INTL 20050624) [ 0.000000] ACPI: APIC 0x00000000000FCB37 000092 (v01 DELL B10K 00000015 ASL 00000061) [ 0.000000] ACPI: BOOT 0x00000000000FCBC9 000028 (v01 DELL B10K 00000015 ASL 00000061) [ 0.000000] ACPI: ASF! 0x00000000000FCBF1 000096 (v32 DELL B10K 00000015 ASL 00000061) [ 0.000000] ACPI: MCFG 0x00000000000FCC87 00003C (v01 DELL B10K 00000015 ASL 00000061) [ 0.000000] ACPI: HPET 0x00000000000FCCC3 000038 (v01 DELL B10K 00000015 ASL 00000061) [ 0.000000] ACPI: TCPA 0x00000000000FCF1F 000032 (v01 DELL B10K 00000015 ASL 00000061) [ 0.000000] ACPI: SLIC 0x00000000000FCCFB 000176 (v01 DELL B10K 00000015 ASL 00000061) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 3592MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] BRK [0x0af44000, 0x0af44fff] PGTABLE [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] Normal [mem 0x0000000001000000-0x00000000377fdfff] [ 0.000000] HighMem [mem 0x00000000377fe000-0x0000000117ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000ddbfefff] [ 0.000000] node 0: [mem 0x0000000100000000-0x0000000117ffffff] [ 0.000000] Reserved but unavailable: 9315 pages [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000117ffffff] [ 0.000000] On node 0 totalpages: 1006493 [ 0.000000] DMA zone: 40 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] Normal zone: 2180 pages used for memmap [ 0.000000] Normal zone: 223230 pages, LIFO batch:31 [ 0.000000] HighMem zone: 779265 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] Reserving Intel graphics memory at 0x00000000de000000-0x00000000dfffffff [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 6 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x000effff] [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] [ 0.000000] e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] random: get_random_bytes called from start_kernel+0x81/0x433 with crng_init=0 [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] percpu: Embedded 30 pages/cpu @(ptrval) s93068 r0 d29812 u122880 [ 0.000000] pcpu-alloc: s93068 r0 d29812 u122880 alloc=30*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1004273 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-46-generic root=UUID=0eaecf29-797f-4744-9015-4ef391a04f60 ro quiet splash vt.handoff=1 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (000377fe:00118000) [ 0.000000] Initializing Movable for node 0 (00000000:00000000) [ 0.000000] Memory: 3916836K/4025972K available (8839K kernel code, 888K rwdata, 3456K rodata, 1092K init, 848K bss, 109136K reserved, 0K cma-reserved, 3117060K highmem) [ 0.000000] virtual kernel memory layout: fixmap : 0xfff14000 - 0xfffff000 ( 940 kB) cpu_entry : 0xffa00000 - 0xffb39000 (1252 kB) pkmap : 0xff800000 - 0xffa00000 (2048 kB) vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) .init : 0xcacf9000 - 0xcae0a000 (1092 kB) .data : 0xca8a1fe8 - 0xcace6040 (4368 kB) .text : 0xca000000 - 0xca8a1fe8 (8839 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] ftrace: allocating 37877 entries in 74 pages [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Tasks RCU enabled. [ 0.000000] NR_IRQS: 2304, nr_irqs: 488, preallocated irqs: 16 [ 0.000000] CPU 0 irqstacks, hard=(ptrval) soft=(ptrval) [ 0.000000] vt handoff: transparent VT on vt#1 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 4194304 bytes of page_ext [ 0.000000] ACPI: Core revision 20170831 [ 0.000000] ACPI BIOS Warning (bug): Incorrect checksum in table [TCPA] - 0x00, should be 0x7F (20170831/tbprint-211) [ 0.000000] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] APIC: Switch to symmetric I/O mode setup [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.020000] tsc: Fast TSC calibration using PIT [ 0.024000] tsc: Detected 2992.556 MHz processor [ 0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5985.11 BogoMIPS (lpj=11970224) [ 0.024000] pid_max: default: 32768 minimum: 301 [ 0.024000] Security Framework initialized [ 0.024000] Yama: becoming mindful. [ 0.024000] AppArmor: AppArmor initialized [ 0.024000] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.024000] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.028111] mce: CPU supports 6 MCE banks [ 0.028116] CPU0: Thermal monitoring enabled (TM2) [ 0.028118] process: using mwait in idle threads [ 0.028123] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4 [ 0.028124] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0 [ 0.028126] Spectre V2 : Mitigation: Full generic retpoline [ 0.028127] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.028128] Speculative Store Bypass: Vulnerable [ 0.028252] Freeing SMP alternatives memory: 36K [ 0.032000] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz (family: 0x6, model: 0x17, stepping: 0xa) [ 0.032000] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver. [ 0.032000] ... version: 2 [ 0.032000] ... bit width: 40 [ 0.032000] ... generic registers: 2 [ 0.032000] ... value mask: 000000ffffffffff [ 0.032000] ... max period: 000000007fffffff [ 0.032000] ... fixed-purpose events: 3 [ 0.032000] ... event mask: 0000000700000003 [ 0.032000] Hierarchical SRCU implementation. [ 0.032000] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.032000] smp: Bringing up secondary CPUs ... [ 0.032000] CPU 1 irqstacks, hard=(ptrval) soft=(ptrval) [ 0.032000] x86: Booting SMP configuration: [ 0.032000] .... node #0, CPUs: #1 [ 0.004000] Initializing CPU#1 [ 0.032077] smp: Brought up 1 node, 2 CPUs [ 0.032077] smpboot: Max logical packages: 4 [ 0.032077] smpboot: Total of 2 processors activated (11970.22 BogoMIPS) [ 0.034741] devtmpfs: initialized [ 0.034741] evm: security.selinux [ 0.034741] evm: security.SMACK64 [ 0.034741] evm: security.SMACK64EXEC [ 0.034741] evm: security.SMACK64TRANSMUTE [ 0.034741] evm: security.SMACK64MMAP [ 0.034741] evm: security.apparmor [ 0.034741] evm: security.ima [ 0.034741] evm: security.capability [ 0.034741] PM: Registering ACPI NVS region [mem 0xddbffc00-0xddc53bff] (344064 bytes) [ 0.036009] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.036009] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.036079] pinctrl core: initialized pinctrl subsystem [ 0.036187] RTC time: 5:13:18, date: 10/22/20 [ 0.036276] NET: Registered protocol family 16 [ 0.036413] audit: initializing netlink subsys (disabled) [ 0.036419] audit: type=2000 audit(1603343598.036:1): state=initialized audit_enabled=0 res=1 [ 0.036419] EISA bus registered [ 0.036419] cpuidle: using governor ladder [ 0.036419] cpuidle: using governor menu [ 0.036419] Simple Boot Flag at 0x7a set to 0x1 [ 0.036419] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.036419] ACPI: bus type PCI registered [ 0.036419] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.036419] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.036419] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.036419] PCI: Using MMCONFIG for extended config space [ 0.036419] PCI: Using configuration type 1 for base access [ 0.037682] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.037682] ACPI: Added _OSI(Module Device) [ 0.037682] ACPI: Added _OSI(Processor Device) [ 0.037682] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.037682] ACPI: Added _OSI(Processor Aggregator Device) [ 0.037682] ACPI: Added _OSI(Linux-Dell-Video) [ 0.037682] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.037682] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.074086] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.110106] ACPI: Interpreter enabled [ 0.110128] ACPI: (supports S0 S1 S3 S4 S5) [ 0.110129] ACPI: Using IOAPIC for interrupt routing [ 0.110237] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.110427] ACPI: Enabled 14 GPEs in block 00 to 3F [ 0.129565] acpi LNXIOBAY:00: ACPI dock station (docks/bays count: 1) [ 0.327208] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.327213] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.327217] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.327220] acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge [ 0.335839] PCI host bridge to bus 0000:00 [ 0.335842] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.335843] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.335845] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.335846] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000effff window] [ 0.335848] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window] [ 0.335849] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfec00000 window] [ 0.335850] pci_bus 0000:00: root bus resource [mem 0xddd00000-0xf7ffffff window] [ 0.335852] pci_bus 0000:00: root bus resource [mem 0xff980000-0xff980fff window] [ 0.335853] pci_bus 0000:00: root bus resource [mem 0xff97c000-0xff97ffff window] [ 0.335855] pci_bus 0000:00: root bus resource [mem 0xff970000-0xff9707ff window] [ 0.335856] pci_bus 0000:00: root bus resource [mem 0xfed20000-0xfed9ffff window] [ 0.335858] pci_bus 0000:00: root bus resource [mem 0xfeda6000-0xfeda6fff window] [ 0.335859] pci_bus 0000:00: root bus resource [mem 0xfeda7000-0xfeda7fff window] [ 0.335861] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.335869] pci 0000:00:00.0: [8086:2e10] type 00 class 0x060000 [ 0.335889] DMAR: Forcing write-buffer flush capability [ 0.335889] DMAR: Disabling IOMMU for graphics on this chipset [ 0.336219] pci 0000:00:01.0: [8086:2e11] type 01 class 0x060400 [ 0.336253] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.336584] pci 0000:00:02.0: [8086:2e12] type 00 class 0x030000 [ 0.336594] pci 0000:00:02.0: reg 0x10: [mem 0xf7c00000-0xf7ffffff 64bit] [ 0.336599] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.336603] pci 0000:00:02.0: reg 0x20: [io 0xecb0-0xecb7] [ 0.336937] pci 0000:00:02.1: [8086:2e13] type 00 class 0x038000 [ 0.336946] pci 0000:00:02.1: reg 0x10: [mem 0xf7b00000-0xf7bfffff 64bit] [ 0.337289] pci 0000:00:03.0: [8086:2e14] type 00 class 0x078000 [ 0.337304] pci 0000:00:03.0: reg 0x10: [mem 0xfeda6000-0xfeda600f 64bit] [ 0.337388] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.337719] pci 0000:00:03.2: [8086:2e16] type 00 class 0x010185 [ 0.337744] pci 0000:00:03.2: reg 0x10: [io 0xfe80-0xfe87] [ 0.337754] pci 0000:00:03.2: reg 0x14: [io 0xfe90-0xfe93] [ 0.337764] pci 0000:00:03.2: reg 0x18: [io 0xfea0-0xfea7] [ 0.337774] pci 0000:00:03.2: reg 0x1c: [io 0xfeb0-0xfeb3] [ 0.337783] pci 0000:00:03.2: reg 0x20: [io 0xfef0-0xfeff] [ 0.338172] pci 0000:00:03.3: [8086:2e17] type 00 class 0x070002 [ 0.338196] pci 0000:00:03.3: reg 0x10: [io 0xecb8-0xecbf] [ 0.338206] pci 0000:00:03.3: reg 0x14: [mem 0xf7ada000-0xf7adafff] [ 0.338608] pci 0000:00:19.0: [8086:10de] type 00 class 0x020000 [ 0.338624] pci 0000:00:19.0: reg 0x10: [mem 0xf7ae0000-0xf7afffff] [ 0.338631] pci 0000:00:19.0: reg 0x14: [mem 0xf7adb000-0xf7adbfff] [ 0.338638] pci 0000:00:19.0: reg 0x18: [io 0xece0-0xecff] [ 0.338687] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.339013] pci 0000:00:1a.0: [8086:3a67] type 00 class 0x0c0300 [ 0.339051] pci 0000:00:1a.0: reg 0x20: [io 0xff20-0xff3f] [ 0.339407] pci 0000:00:1a.1: [8086:3a68] type 00 class 0x0c0300 [ 0.339445] pci 0000:00:1a.1: reg 0x20: [io 0xff00-0xff1f] [ 0.339802] pci 0000:00:1a.2: [8086:3a69] type 00 class 0x0c0300 [ 0.339839] pci 0000:00:1a.2: reg 0x20: [io 0xfc00-0xfc1f] [ 0.340207] pci 0000:00:1a.7: [8086:3a6c] type 00 class 0x0c0320 [ 0.340226] pci 0000:00:1a.7: reg 0x10: [mem 0xf7ad9c00-0xf7ad9fff] [ 0.340298] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.340627] pci 0000:00:1b.0: [8086:3a6e] type 00 class 0x040300 [ 0.340645] pci 0000:00:1b.0: reg 0x10: [mem 0xf7adc000-0xf7adffff 64bit] [ 0.340705] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.341037] pci 0000:00:1c.0: [8086:3a70] type 01 class 0x060400 [ 0.341101] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.341442] pci 0000:00:1c.1: [8086:3a72] type 01 class 0x060400 [ 0.341506] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.341847] pci 0000:00:1d.0: [8086:3a64] type 00 class 0x0c0300 [ 0.341885] pci 0000:00:1d.0: reg 0x20: [io 0xff80-0xff9f] [ 0.342242] pci 0000:00:1d.1: [8086:3a65] type 00 class 0x0c0300 [ 0.342279] pci 0000:00:1d.1: reg 0x20: [io 0xff60-0xff7f] [ 0.342637] pci 0000:00:1d.2: [8086:3a66] type 00 class 0x0c0300 [ 0.342675] pci 0000:00:1d.2: reg 0x20: [io 0xff40-0xff5f] [ 0.343038] pci 0000:00:1d.7: [8086:3a6a] type 00 class 0x0c0320 [ 0.343057] pci 0000:00:1d.7: reg 0x10: [mem 0xff980000-0xff9803ff] [ 0.343129] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.343457] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 0.343829] pci 0000:00:1f.0: [8086:3a1a] type 00 class 0x060100 [ 0.344245] pci 0000:00:1f.2: [8086:3a00] type 00 class 0x01018f [ 0.344259] pci 0000:00:1f.2: reg 0x10: [io 0xfe00-0xfe07] [ 0.344265] pci 0000:00:1f.2: reg 0x14: [io 0xfe10-0xfe13] [ 0.344272] pci 0000:00:1f.2: reg 0x18: [io 0xfe20-0xfe27] [ 0.344278] pci 0000:00:1f.2: reg 0x1c: [io 0xfe30-0xfe33] [ 0.344284] pci 0000:00:1f.2: reg 0x20: [io 0xfec0-0xfecf] [ 0.344290] pci 0000:00:1f.2: reg 0x24: [io 0xecc0-0xeccf] [ 0.344635] pci 0000:00:1f.3: [8086:3a60] type 00 class 0x0c0500 [ 0.344651] pci 0000:00:1f.3: reg 0x10: [mem 0xf7ad9b00-0xf7ad9bff 64bit] [ 0.344668] pci 0000:00:1f.3: reg 0x20: [io 0x0940-0x095f] [ 0.345003] pci 0000:00:1f.5: [8086:3a06] type 00 class 0x010185 [ 0.345017] pci 0000:00:1f.5: reg 0x10: [io 0xfe40-0xfe47] [ 0.345023] pci 0000:00:1f.5: reg 0x14: [io 0xfe50-0xfe53] [ 0.345030] pci 0000:00:1f.5: reg 0x18: [io 0xfe60-0xfe67] [ 0.345036] pci 0000:00:1f.5: reg 0x1c: [io 0xfe70-0xfe73] [ 0.345042] pci 0000:00:1f.5: reg 0x20: [io 0xfed0-0xfedf] [ 0.345048] pci 0000:00:1f.5: reg 0x24: [io 0xecd0-0xecdf] [ 0.345413] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.345416] pci 0000:00:01.0: bridge window [mem 0xf7900000-0xf79fffff] [ 0.345454] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.345458] pci 0000:00:1c.0: bridge window [mem 0xf7800000-0xf78fffff] [ 0.345499] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.345503] pci 0000:00:1c.1: bridge window [mem 0xf7700000-0xf77fffff] [ 0.345566] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode) [ 0.345573] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.345575] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.345576] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.345577] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000effff window] (subtractive decode) [ 0.345579] pci 0000:00:1e.0: bridge window [mem 0x000f0000-0x000fffff window] (subtractive decode) [ 0.345580] pci 0000:00:1e.0: bridge window [mem 0xfc000000-0xfec00000 window] (subtractive decode) [ 0.345582] pci 0000:00:1e.0: bridge window [mem 0xddd00000-0xf7ffffff window] (subtractive decode) [ 0.345583] pci 0000:00:1e.0: bridge window [mem 0xff980000-0xff980fff window] (subtractive decode) [ 0.345584] pci 0000:00:1e.0: bridge window [mem 0xff97c000-0xff97ffff window] (subtractive decode) [ 0.345586] pci 0000:00:1e.0: bridge window [mem 0xff970000-0xff9707ff window] (subtractive decode) [ 0.345587] pci 0000:00:1e.0: bridge window [mem 0xfed20000-0xfed9ffff window] (subtractive decode) [ 0.345589] pci 0000:00:1e.0: bridge window [mem 0xfeda6000-0xfeda6fff window] (subtractive decode) [ 0.345590] pci 0000:00:1e.0: bridge window [mem 0xfeda7000-0xfeda7fff window] (subtractive decode) [ 0.345605] pci_bus 0000:00: on NUMA node 0 [ 0.371004] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15) [ 0.371889] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 15) [ 0.372767] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 15) [ 0.373660] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 15) [ 0.374558] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled. [ 0.375438] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 9 10 11 12 15) [ 0.376333] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15) [ 0.377208] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 15) [ 0.377908] SCSI subsystem initialized [ 0.377928] libata version 3.00 loaded. [ 0.377928] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.377928] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.377928] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.377928] vgaarb: loaded [ 0.377928] ACPI: bus type USB registered [ 0.377928] usbcore: registered new interface driver usbfs [ 0.377928] usbcore: registered new interface driver hub [ 0.377928] usbcore: registered new device driver usb [ 0.377928] EDAC MC: Ver: 3.0.0 [ 0.377928] PCI: Using ACPI for IRQ routing [ 0.377928] PCI: pci_cache_line_size set to 64 bytes [ 0.377928] Expanded resource Reserved due to conflict with PCI Bus 0000:00 [ 0.377928] Expanded resource Reserved due to conflict with PCI Bus 0000:00 [ 0.377928] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 0.377928] e820: reserve RAM buffer [mem 0xddbffc00-0xdfffffff] [ 0.377928] NetLabel: Initializing [ 0.377928] NetLabel: domain hash size = 128 [ 0.377928] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.377928] NetLabel: unlabeled traffic allowed by default [ 0.380150] HPET: 8 timers in total, 5 timers will be used for per-cpu timer [ 0.380156] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 25, 26, 27, 28, 0 [ 0.380161] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.382182] hpet: hpet2 irq 24 for MSI [ 0.382191] hpet: hpet3 irq 25 for MSI [ 0.382193] clocksource: Switched to clocksource hpet [ 0.393595] VFS: Disk quotas dquot_6.6.0 [ 0.393615] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.393727] AppArmor: AppArmor Filesystem Enabled [ 0.393759] pnp: PnP ACPI init [ 0.397492] system 00:00: [io 0x0800-0x085f] has been reserved [ 0.397494] system 00:00: [io 0x0c00-0x0c7f] has been reserved [ 0.397496] system 00:00: [io 0x0860-0x08ff] has been reserved [ 0.397501] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.397730] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.411469] pnp 00:02: [dma 0 disabled] [ 0.412666] pnp 00:02: Plug and Play ACPI device, IDs PNP0401 (active) [ 0.417926] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.432316] pnp: PnP ACPI: found 4 devices [ 0.432319] PnPBIOS: Disabled by ACPI PNP [ 0.468900] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.468915] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000 [ 0.468918] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000 [ 0.468924] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000 [ 0.468926] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000 [ 0.468946] pci 0000:00:1c.0: BAR 15: assigned [mem 0xfc000000-0xfc1fffff 64bit pref] [ 0.468953] pci 0000:00:1c.1: BAR 15: assigned [mem 0xfc200000-0xfc3fffff 64bit pref] [ 0.468955] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff] [ 0.468957] pci 0000:00:1c.1: BAR 13: assigned [io 0x2000-0x2fff] [ 0.468960] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.468963] pci 0000:00:01.0: bridge window [mem 0xf7900000-0xf79fffff] [ 0.468967] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.468969] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] [ 0.468973] pci 0000:00:1c.0: bridge window [mem 0xf7800000-0xf78fffff] [ 0.468975] pci 0000:00:1c.0: bridge window [mem 0xfc000000-0xfc1fffff 64bit pref] [ 0.468980] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.468982] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff] [ 0.468985] pci 0000:00:1c.1: bridge window [mem 0xf7700000-0xf77fffff] [ 0.468988] pci 0000:00:1c.1: bridge window [mem 0xfc200000-0xfc3fffff 64bit pref] [ 0.468993] pci 0000:00:1e.0: PCI bridge to [bus 04] [ 0.469001] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.469003] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.469004] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.469006] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000effff window] [ 0.469007] pci_bus 0000:00: resource 8 [mem 0x000f0000-0x000fffff window] [ 0.469008] pci_bus 0000:00: resource 9 [mem 0xfc000000-0xfec00000 window] [ 0.469010] pci_bus 0000:00: resource 10 [mem 0xddd00000-0xf7ffffff window] [ 0.469011] pci_bus 0000:00: resource 11 [mem 0xff980000-0xff980fff window] [ 0.469013] pci_bus 0000:00: resource 12 [mem 0xff97c000-0xff97ffff window] [ 0.469014] pci_bus 0000:00: resource 13 [mem 0xff970000-0xff9707ff window] [ 0.469016] pci_bus 0000:00: resource 14 [mem 0xfed20000-0xfed9ffff window] [ 0.469017] pci_bus 0000:00: resource 15 [mem 0xfeda6000-0xfeda6fff window] [ 0.469018] pci_bus 0000:00: resource 16 [mem 0xfeda7000-0xfeda7fff window] [ 0.469020] pci_bus 0000:01: resource 1 [mem 0xf7900000-0xf79fffff] [ 0.469021] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff] [ 0.469023] pci_bus 0000:02: resource 1 [mem 0xf7800000-0xf78fffff] [ 0.469024] pci_bus 0000:02: resource 2 [mem 0xfc000000-0xfc1fffff 64bit pref] [ 0.469026] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff] [ 0.469027] pci_bus 0000:03: resource 1 [mem 0xf7700000-0xf77fffff] [ 0.469029] pci_bus 0000:03: resource 2 [mem 0xfc200000-0xfc3fffff 64bit pref] [ 0.469030] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7 window] [ 0.469032] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff window] [ 0.469033] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.469034] pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000effff window] [ 0.469036] pci_bus 0000:04: resource 8 [mem 0x000f0000-0x000fffff window] [ 0.469037] pci_bus 0000:04: resource 9 [mem 0xfc000000-0xfec00000 window] [ 0.469039] pci_bus 0000:04: resource 10 [mem 0xddd00000-0xf7ffffff window] [ 0.469040] pci_bus 0000:04: resource 11 [mem 0xff980000-0xff980fff window] [ 0.469042] pci_bus 0000:04: resource 12 [mem 0xff97c000-0xff97ffff window] [ 0.469043] pci_bus 0000:04: resource 13 [mem 0xff970000-0xff9707ff window] [ 0.469044] pci_bus 0000:04: resource 14 [mem 0xfed20000-0xfed9ffff window] [ 0.469046] pci_bus 0000:04: resource 15 [mem 0xfeda6000-0xfeda6fff window] [ 0.469047] pci_bus 0000:04: resource 16 [mem 0xfeda7000-0xfeda7fff window] [ 0.469099] NET: Registered protocol family 2 [ 0.469261] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.469273] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.469296] TCP: Hash tables configured (established 8192 bind 8192) [ 0.469334] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.469340] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.469387] NET: Registered protocol family 1 [ 0.469402] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.474980] PCI: CLS 64 bytes, default 64 [ 0.475017] Unpacking initramfs... [ 1.008010] random: fast init done [ 1.234780] Freeing initrd memory: 50712K [ 1.235003] Scanning for low memory corruption every 60 seconds [ 1.235685] Initialise system trusted keyrings [ 1.235696] Key type blacklist registered [ 1.235750] workingset: timestamp_bits=14 max_order=20 bucket_order=6 [ 1.237286] zbud: loaded [ 1.237627] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.237799] fuse init (API version 7.26) [ 1.239360] Key type asymmetric registered [ 1.239361] Asymmetric key parser 'x509' registered [ 1.239372] bounce: pool size: 64 pages [ 1.239385] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 1.239419] io scheduler noop registered [ 1.239420] io scheduler deadline registered [ 1.239475] io scheduler cfq registered (default) [ 1.240997] vesafb: mode is 1024x768x32, linelength=4096, pages=0 [ 1.240998] vesafb: scrolling: redraw [ 1.241000] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.241016] vesafb: framebuffer at 0xe0000000, mapped to 0x(ptrval), using 3072k, total 3072k [ 1.241121] Console: switching to colour frame buffer device 128x48 [ 1.241142] fb0: VESA VGA frame buffer device [ 1.241157] intel_idle: does not run on family 6 model 23 [ 1.241229] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.241253] ACPI: Power Button [VBTN] [ 1.241298] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.241311] ACPI: Power Button [PWRF] [ 1.243274] Monitor-Mwait will be used to enter C-1 state [ 1.245367] isapnp: Scanning for PnP cards... [ 1.245435] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.265874] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.288247] 0000:00:03.3: ttyS4 at I/O 0xecb8 (irq = 17, base_baud = 115200) is a 16550A [ 1.288666] Linux agpgart interface v0.103 [ 1.295914] loop: module loaded [ 1.296056] ata_piix 0000:00:1f.2: version 2.13 [ 1.296413] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 1.456579] scsi host0: ata_piix [ 1.456657] scsi host1: ata_piix [ 1.456696] ata1: SATA max UDMA/133 cmd 0xfe00 ctl 0xfe10 bmdma 0xfec0 irq 18 [ 1.456699] ata2: SATA max UDMA/133 cmd 0xfe20 ctl 0xfe30 bmdma 0xfec8 irq 18 [ 1.457053] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] [ 1.554817] isapnp: No Plug & Play device found [ 1.616285] scsi host2: ata_piix [ 1.616376] scsi host3: ata_piix [ 1.616416] ata3: SATA max UDMA/133 cmd 0xfe40 ctl 0xfe50 bmdma 0xfed0 irq 18 [ 1.616418] ata4: SATA max UDMA/133 cmd 0xfe60 ctl 0xfe70 bmdma 0xfed8 irq 18 [ 1.617065] scsi host4: ata_generic [ 1.617141] scsi host5: ata_generic [ 1.617176] ata5: PATA max UDMA/100 cmd 0xfe80 ctl 0xfe90 bmdma 0xfef0 irq 18 [ 1.617177] ata6: PATA max UDMA/100 cmd 0xfea0 ctl 0xfeb0 bmdma 0xfef8 irq 18 [ 1.617236] libphy: Fixed MDIO Bus: probed [ 1.617237] tun: Universal TUN/TAP device driver, 1.6 [ 1.617270] PPP generic driver version 2.4.2 [ 1.617310] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.617313] ehci-pci: EHCI PCI platform driver [ 1.617697] ehci-pci 0000:00:1a.7: EHCI Host Controller [ 1.617703] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 1.617713] ehci-pci 0000:00:1a.7: debug port 1 [ 1.621605] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported [ 1.621615] ehci-pci 0000:00:1a.7: irq 22, io mem 0xf7ad9c00 [ 1.636023] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 1.636082] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.636084] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.636086] usb usb1: Product: EHCI Host Controller [ 1.636088] usb usb1: Manufacturer: Linux 4.15.0-46-generic ehci_hcd [ 1.636090] usb usb1: SerialNumber: 0000:00:1a.7 [ 1.636220] hub 1-0:1.0: USB hub found [ 1.636226] hub 1-0:1.0: 6 ports detected [ 1.636736] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 1.636741] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 1.636749] ehci-pci 0000:00:1d.7: debug port 1 [ 1.640648] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported [ 1.640659] ehci-pci 0000:00:1d.7: irq 23, io mem 0xff980000 [ 1.656023] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.656079] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.656082] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.656084] usb usb2: Product: EHCI Host Controller [ 1.656086] usb usb2: Manufacturer: Linux 4.15.0-46-generic ehci_hcd [ 1.656087] usb usb2: SerialNumber: 0000:00:1d.7 [ 1.656208] hub 2-0:1.0: USB hub found [ 1.656214] hub 2-0:1.0: 6 ports detected [ 1.656361] ehci-platform: EHCI generic platform driver [ 1.656370] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.656372] ohci-pci: OHCI PCI platform driver [ 1.656381] ohci-platform: OHCI generic platform driver [ 1.656388] uhci_hcd: USB Universal Host Controller Interface driver [ 1.656740] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 1.656744] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 1.656749] uhci_hcd 0000:00:1a.0: detected 2 ports [ 1.656770] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff20 [ 1.656810] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.656812] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.656813] usb usb3: Product: UHCI Host Controller [ 1.656814] usb usb3: Manufacturer: Linux 4.15.0-46-generic uhci_hcd [ 1.656816] usb usb3: SerialNumber: 0000:00:1a.0 [ 1.656905] hub 3-0:1.0: USB hub found [ 1.656911] hub 3-0:1.0: 2 ports detected [ 1.657345] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 1.657350] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 1.657355] uhci_hcd 0000:00:1a.1: detected 2 ports [ 1.657376] uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000ff00 [ 1.657417] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.657418] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.657420] usb usb4: Product: UHCI Host Controller [ 1.657421] usb usb4: Manufacturer: Linux 4.15.0-46-generic uhci_hcd [ 1.657422] usb usb4: SerialNumber: 0000:00:1a.1 [ 1.657511] hub 4-0:1.0: USB hub found [ 1.657516] hub 4-0:1.0: 2 ports detected [ 1.657948] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 1.657953] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 1.657957] uhci_hcd 0000:00:1a.2: detected 2 ports [ 1.657973] uhci_hcd 0000:00:1a.2: irq 22, io base 0x0000fc00 [ 1.658014] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.658016] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.658017] usb usb5: Product: UHCI Host Controller [ 1.658019] usb usb5: Manufacturer: Linux 4.15.0-46-generic uhci_hcd [ 1.658020] usb usb5: SerialNumber: 0000:00:1a.2 [ 1.658108] hub 5-0:1.0: USB hub found [ 1.658113] hub 5-0:1.0: 2 ports detected [ 1.658548] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.658552] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 1.658557] uhci_hcd 0000:00:1d.0: detected 2 ports [ 1.658572] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000ff80 [ 1.658611] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.658613] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.658614] usb usb6: Product: UHCI Host Controller [ 1.658615] usb usb6: Manufacturer: Linux 4.15.0-46-generic uhci_hcd [ 1.658617] usb usb6: SerialNumber: 0000:00:1d.0 [ 1.658705] hub 6-0:1.0: USB hub found [ 1.658710] hub 6-0:1.0: 2 ports detected [ 1.659143] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.659147] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 1.659152] uhci_hcd 0000:00:1d.1: detected 2 ports [ 1.659167] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000ff60 [ 1.659206] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.659208] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.659209] usb usb7: Product: UHCI Host Controller [ 1.659211] usb usb7: Manufacturer: Linux 4.15.0-46-generic uhci_hcd [ 1.659212] usb usb7: SerialNumber: 0000:00:1d.1 [ 1.659300] hub 7-0:1.0: USB hub found [ 1.659305] hub 7-0:1.0: 2 ports detected [ 1.659741] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.659745] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 1.659750] uhci_hcd 0000:00:1d.2: detected 2 ports [ 1.659765] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40 [ 1.659804] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.659806] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.659807] usb usb8: Product: UHCI Host Controller [ 1.659808] usb usb8: Manufacturer: Linux 4.15.0-46-generic uhci_hcd [ 1.659810] usb usb8: SerialNumber: 0000:00:1d.2 [ 1.659897] hub 8-0:1.0: USB hub found [ 1.659903] hub 8-0:1.0: 2 ports detected [ 1.660047] i8042: PNP: No PS/2 controller found. [ 1.660047] i8042: Probing ports directly. [ 1.662881] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.662885] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.662993] mousedev: PS/2 mouse device common for all mice [ 1.663103] rtc_cmos 00:01: RTC can wake from S4 [ 1.663198] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 1.663218] rtc_cmos 00:01: alarms up to one day, 242 bytes nvram, hpet irqs [ 1.663225] i2c /dev entries driver [ 1.663229] pcie_mp2_amd: AMD(R) PCI-E MP2 Communication Driver Version: 1.0 [ 1.663315] device-mapper: uevent: version 1.0.3 [ 1.663373] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com [ 1.663392] platform eisa.0: Probing EISA bus 0 [ 1.663395] platform eisa.0: EISA: Cannot allocate resource for mainboard [ 1.663396] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 1.663397] platform eisa.0: Cannot allocate resource for EISA slot 2 [ 1.663399] platform eisa.0: Cannot allocate resource for EISA slot 3 [ 1.663400] platform eisa.0: Cannot allocate resource for EISA slot 4 [ 1.663402] platform eisa.0: Cannot allocate resource for EISA slot 5 [ 1.663403] platform eisa.0: Cannot allocate resource for EISA slot 6 [ 1.663404] platform eisa.0: Cannot allocate resource for EISA slot 7 [ 1.663406] platform eisa.0: Cannot allocate resource for EISA slot 8 [ 1.663407] platform eisa.0: EISA: Detected 0 cards [ 1.663411] cpufreq_nforce2: No nForce2 chipset [ 1.663428] ledtrig-cpu: registered to indicate activity on CPUs [ 1.663658] NET: Registered protocol family 10 [ 1.667963] Segment Routing with IPv6 [ 1.667986] NET: Registered protocol family 17 [ 1.668023] Key type dns_resolver registered [ 1.668226] microcode: sig=0x1067a, pf=0x1, revision=0xa0b [ 1.668268] microcode: Microcode Update Driver: v2.2. [ 1.668271] Using IPI No-Shortcut mode [ 1.668277] sched_clock: Marking stable (1668263961, 0)->(1750691132, -82427171) [ 1.668419] registered taskstats version 1 [ 1.668428] Loading compiled-in X.509 certificates [ 1.673314] Loaded X.509 cert 'Build time autogenerated kernel key: 661adb8c02385b198116430509aea73fdded8fe8' [ 1.673328] zswap: loaded using pool lzo/zbud [ 1.676998] Key type big_key registered [ 1.677001] Key type trusted registered [ 1.678802] Key type encrypted registered [ 1.678804] AppArmor: AppArmor sha1 policy hashing enabled [ 1.678807] ima: No TPM chip found, activating TPM-bypass! (rc=-19) [ 1.678811] ima: Allocated hash algorithm: sha1 [ 1.678824] evm: HMAC attrs: 0x1 [ 1.679061] Magic number: 8:374:214 [ 1.679153] rtc_cmos 00:01: setting system clock to 2020-10-22 05:13:20 UTC (1603343600) [ 1.679223] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.679223] EDD information not available. [ 1.930409] ata3: SATA link down (SStatus 4 SControl 300) [ 1.930450] ata4: SATA link down (SStatus 4 SControl 300) [ 1.972009] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.992005] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 2.129270] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608 [ 2.129272] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.129274] usb 1-1: Product: USB2.0 Hub [ 2.129681] hub 1-1:1.0: USB hub found [ 2.130020] hub 1-1:1.0: 4 ports detected [ 2.148563] usb 2-1: New USB device found, idVendor=1a40, idProduct=0101 [ 2.148565] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.148567] usb 2-1: Product: USB 2.0 Hub [ 2.148724] hub 2-1:1.0: USB hub found [ 2.148811] hub 2-1:1.0: 4 ports detected [ 2.240051] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.240061] ata1.01: SATA link down (SStatus 4 SControl 300) [ 2.240199] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.240210] ata2.01: SATA link down (SStatus 4 SControl 300) [ 2.240218] ata2.01: link offline, clearing class 3 to NONE [ 2.240275] tsc: Refined TSC clocksource calibration: 2992.481 MHz [ 2.240280] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2b228661c25, max_idle_ns: 440795245102 ns [ 2.242510] ata2.00: ATAPI: TSSTcorp DVD+/-RW TS-H653G, D200, max UDMA/100 [ 2.242512] ata2.00: applying bridge limits [ 2.242630] ata1.00: ATA-8: ST3500312CS, ES13, max UDMA/133 [ 2.242632] ata1.00: 976773168 sectors, multi 8: LBA48 NCQ (depth 0/32) [ 2.247201] ata2.00: configured for UDMA/100 [ 2.247346] ata1.00: configured for UDMA/133 [ 2.247543] scsi 0:0:0:0: Direct-Access ATA ST3500312CS ES13 PQ: 0 ANSI: 5 [ 2.247726] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.247752] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 2.247764] sd 0:0:0:0: [sda] Write Protect is off [ 2.247765] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.247825] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.248793] scsi 1:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-H653G D200 PQ: 0 ANSI: 5 [ 2.256001] usb 1-3: new high-speed USB device number 3 using ehci-pci [ 2.283550] sda: sda1 sda2 < sda5 > [ 2.283936] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.305882] sr 1:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.305884] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.306026] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.306083] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 2.413017] usb 1-3: New USB device found, idVendor=1058, idProduct=1100 [ 2.413020] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.413021] usb 1-3: Product: My Book [ 2.413023] usb 1-3: Manufacturer: Western Digital [ 2.413025] usb 1-3: SerialNumber: 57442D574341554632323132333638 [ 2.476692] Freeing unused kernel memory: 1092K [ 2.480004] usb 8-1: new full-speed USB device number 2 using uhci_hcd [ 2.492043] Write protecting the kernel text: 8840k [ 2.492094] Write protecting the kernel read-only data: 3480k [ 2.492095] NX-protecting the kernel data: 7544k [ 2.492277] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.503763] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 2.503865] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 2.503876] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 2.576620] wmi_bus wmi_bus-PNP0C14:00: WQBC data block query control method not found [ 2.586166] pps_core: LinuxPPS API ver. 1 registered [ 2.586167] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 2.589751] PTP clock support registered [ 2.611783] usb-storage 1-3:1.0: USB Mass Storage device detected [ 2.639089] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 2.639090] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.639538] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 2.649628] scsi host6: usb-storage 1-3:1.0 [ 2.649712] usbcore: registered new interface driver usb-storage [ 2.653418] usbcore: registered new interface driver uas [ 2.686025] usb 8-1: New USB device found, idVendor=0451, idProduct=2046 [ 2.686028] usb 8-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.689065] hub 8-1:1.0: USB hub found [ 2.691021] hub 8-1:1.0: 4 ports detected [ 2.821461] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:23:ae:95:d3:5c [ 2.821463] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 2.821511] e1000e 0000:00:19.0 eth0: MAC: 8, PHY: 8, PBA No: 8021FF-0FF [ 2.822056] pci 0000:00:00.0: Intel Q45/Q43 Chipset [ 2.822073] pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable [ 2.823286] pci 0000:00:00.0: detected 32768K stolen memory [ 2.823310] [drm] Memory usable by graphics device = 2048M [ 2.823314] checking generic (e0000000 300000) vs hw (e0000000 10000000) [ 2.823315] fb: switching to inteldrmfb from VESA VGA [ 2.823339] Console: switching to colour dummy device 80x25 [ 2.823975] [drm] Replacing VGA console driver [ 2.830020] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.830021] [drm] Driver supports precise vblank timestamp query. [ 2.830483] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 2.839771] [drm] RC6 disabled, disabling runtime PM support [ 2.840306] [drm] Initialized i915 1.6.0 20171023 for 0000:00:02.0 on minor 0 [ 2.940046] fbcon: inteldrmfb (fb0) is primary device [ 2.940103] Console: switching to colour frame buffer device 180x56 [ 2.940135] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 2.988005] usb 8-1.4: new full-speed USB device number 3 using uhci_hcd [ 3.106021] usb 8-1.4: not running at top speed; connect to a high speed hub [ 3.150021] usb 8-1.4: New USB device found, idVendor=03f0, idProduct=5d12 [ 3.150024] usb 8-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.150026] usb 8-1.4: Product: Officejet 6600 [ 3.150028] usb 8-1.4: Manufacturer: HP [ 3.150030] usb 8-1.4: SerialNumber: CN43J8R0MR05RN [ 3.228005] usb 2-1.1: new full-speed USB device number 4 using ehci-pci [ 3.264058] clocksource: Switched to clocksource tsc [ 3.439185] usb 2-1.1: New USB device found, idVendor=046d, idProduct=c52b [ 3.439188] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.439190] usb 2-1.1: Product: USB Receiver [ 3.439192] usb 2-1.1: Manufacturer: Logitech [ 3.680661] scsi 6:0:0:0: Direct-Access WD 6400AAV External 1.75 PQ: 0 ANSI: 4 [ 3.680892] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 3.681397] sd 6:0:0:0: [sdb] 1250263728 512-byte logical blocks: (640 GB/596 GiB) [ 3.682020] sd 6:0:0:0: [sdb] Write Protect is off [ 3.682022] sd 6:0:0:0: [sdb] Mode Sense: 23 00 00 00 [ 3.682649] sd 6:0:0:0: [sdb] No Caching mode page found [ 3.682654] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 4.107999] usb 8-2: new full-speed USB device number 4 using uhci_hcd [ 4.485024] usb 8-2: New USB device found, idVendor=0451, idProduct=2046 [ 4.485027] usb 8-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.488067] hub 8-2:1.0: USB hub found [ 4.490023] hub 8-2:1.0: 4 ports detected [ 4.516009] usb 2-1.2: new full-speed USB device number 6 using ehci-pci [ 4.728188] usb 2-1.2: New USB device found, idVendor=046d, idProduct=c52b [ 4.728191] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.728193] usb 2-1.2: Product: USB Receiver [ 4.728194] usb 2-1.2: Manufacturer: Logitech [ 4.908001] usb 2-1.3: new full-speed USB device number 7 using ehci-pci [ 5.117561] usb 2-1.3: New USB device found, idVendor=046d, idProduct=0a23 [ 5.117563] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.117565] usb 2-1.3: Product: Logitech Z305 [ 5.117567] usb 2-1.3: Manufacturer: Logitech [ 5.295998] usb 2-1.4: new high-speed USB device number 8 using ehci-pci [ 5.504561] usb 2-1.4: New USB device found, idVendor=1a40, idProduct=0101 [ 5.504563] usb 2-1.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 5.504565] usb 2-1.4: Product: USB 2.0 Hub [ 5.504711] hub 2-1.4:1.0: USB hub found [ 5.504812] hub 2-1.4:1.0: 4 ports detected [ 5.513387] hidraw: raw HID events driver (C) Jiri Kosina [ 5.534996] usbcore: registered new interface driver usbhid [ 5.534997] usbhid: USB HID core driver [ 5.540153] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.7-1.1/input2 [ 5.546049] input: Logitech Logitech Z305 as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1.3/2-1.3:1.2/0003:046D:0A23.0007/input/input5 [ 5.604096] hid-generic 0003:046D:0A23.0007: input,hidraw1: USB HID v1.00 Device [ Logitech Logitech Z305 ] on usb-0000:00:1d.7-1.3/input2 [ 5.660690] logitech-djreceiver 0003:046D:C52B.0006: hiddev1,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.7-1.2/input2 [ 5.792012] input: Logitech M705 as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1.1/2-1.1:1.2/0003:046D:C52B.0003/0003:046D:101B.0008/input/input6 [ 5.792126] logitech-hidpp-device 0003:046D:101B.0008: input,hidraw3: USB HID v1.11 Mouse [Logitech M705] on usb-0000:00:1d.7-1.1:1 [ 5.800154] input: Logitech K750 as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1.1/2-1.1:1.2/0003:046D:C52B.0003/0003:046D:4002.0009/input/input7 [ 5.800210] logitech-hidpp-device 0003:046D:4002.0009: input,hidraw4: USB HID v1.11 Keyboard [Logitech K750] on usb-0000:00:1d.7-1.1:2 [ 5.808158] input: Logitech K400 Plus as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1.2/2-1.2:1.2/0003:046D:C52B.0006/0003:046D:404D.000A/input/input8 [ 5.808242] logitech-hidpp-device 0003:046D:404D.000A: input,hidraw5: USB HID v1.11 Keyboard [Logitech K400 Plus] on usb-0000:00:1d.7-1.2:1 [ 6.005944] logitech-hidpp-device 0003:046D:101B.0008: HID++ 1.0 device connected. [ 6.058366] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 6.918404] random: crng init done [ 6.918406] random: 7 urandom warning(s) missed due to ratelimiting [ 7.900071] ip_tables: (C) 2000-2006 Netfilter Core Team [ 8.064935] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 8.084079] systemd[1]: Detected architecture x86. [ 8.118947] systemd[1]: Set hostname to . [ 10.306674] sdb: sdb1 [ 10.308903] sd 6:0:0:0: [sdb] Attached SCSI disk [ 10.579137] systemd[1]: Reached target Remote File Systems. [ 10.579228] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 10.579391] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 10.579575] systemd[1]: Created slice User and Session Slice. [ 10.579588] systemd[1]: Reached target User and Group Name Lookups. [ 10.579723] systemd[1]: Created slice System Slice. [ 10.579786] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 11.126985] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 11.765776] systemd-journald[260]: Received request to flush runtime journal from PID 1 [ 11.859645] lp: driver loaded but no devices found [ 12.167709] ppdev: user-space parallel port driver [ 12.198599] parport_pc 00:02: reported by Plug and Play ACPI [ 12.198658] parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,EPP,ECP] [ 12.296074] lp0: using parport0 (interrupt-driven). [ 28.193705] audit: type=1400 audit(1603343627.012:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="content-hub-clipboard" pid=369 comm="apparmor_parser" [ 28.204621] audit: type=1400 audit(1603343627.020:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="content-hub-peer-picker" pid=370 comm="apparmor_parser" [ 28.228040] audit: type=1400 audit(1603343627.044:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=371 comm="apparmor_parser" [ 28.228043] audit: type=1400 audit(1603343627.044:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=371 comm="apparmor_parser" [ 28.263590] audit: type=1400 audit(1603343627.076:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="url-dispatcher-bad-url-helper" pid=373 comm="apparmor_parser" [ 28.445444] audit: type=1400 audit(1603343627.260:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=372 comm="apparmor_parser" [ 28.445447] audit: type=1400 audit(1603343627.260:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=372 comm="apparmor_parser" [ 28.445449] audit: type=1400 audit(1603343627.260:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=372 comm="apparmor_parser" [ 28.445451] audit: type=1400 audit(1603343627.260:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=372 comm="apparmor_parser" [ 28.447454] audit: type=1400 audit(1603343627.260:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=376 comm="apparmor_parser" [ 32.476220] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 32.541460] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x0000000000000828-0x000000000000082D (\GLBC) (20170831/utaddress-247) [ 32.541465] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x000000000000082A-0x000000000000082A (\SACT) (20170831/utaddress-247) [ 32.541468] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x0000000000000828-0x0000000000000828 (\SSTS) (20170831/utaddress-247) [ 32.541472] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 32.541474] ACPI Warning: SystemIO range 0x00000000000008B0-0x00000000000008BF conflicts with OpRegion 0x00000000000008B8-0x00000000000008BB (\GIC2) (20170831/utaddress-247) [ 32.541477] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 32.541478] ACPI Warning: SystemIO range 0x0000000000000880-0x00000000000008AF conflicts with OpRegion 0x000000000000088C-0x000000000000088F (\GIC1) (20170831/utaddress-247) [ 32.541481] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 32.541509] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 33.395932] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 33.405571] dell_smbios: Unable to run on non-Dell system [ 33.477319] usbcore: registered new interface driver snd-usb-audio [ 33.640873] gpio_ich: GPIO from 440 to 511 on gpio_ich [ 33.911481] kvm: disabled by bios [ 33.949397] kvm: disabled by bios [ 33.956196] intel_powerclamp: No package C-state available [ 34.008307] intel_powerclamp: No package C-state available [ 34.014213] snd_hda_codec_analog hdaudioC0D2: autoconfig for AD1984A: line_outs=1 (0x12/0x0/0x0/0x0/0x0) type:line [ 34.014215] snd_hda_codec_analog hdaudioC0D2: speaker_outs=1 (0x13/0x0/0x0/0x0/0x0) [ 34.014217] snd_hda_codec_analog hdaudioC0D2: hp_outs=1 (0x11/0x0/0x0/0x0/0x0) [ 34.014218] snd_hda_codec_analog hdaudioC0D2: mono: mono_out=0x0 [ 34.014219] snd_hda_codec_analog hdaudioC0D2: inputs: [ 34.014221] snd_hda_codec_analog hdaudioC0D2: Mic=0x14 [ 34.014222] snd_hda_codec_analog hdaudioC0D2: Line=0x15 [ 34.021929] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 34.021990] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 34.022046] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 34.022100] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 38.320091] usblp 8-1.4:1.1: usblp2: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x03F0 pid 0x5D12 [ 38.324156] usblp 8-1.4:1.2: usblp3: USB Bidirectional printer dev 3 if 2 alt 0 proto 2 vid 0x03F0 pid 0x5D12 [ 38.324186] usbcore: registered new interface driver usblp [ 39.070404] Adding 4024316k swap on /dev/sda5. Priority:-2 extents:1 across:4024316k FS [ 42.974963] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 43.156257] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 44.925343] kauditd_printk_skb: 26 callbacks suppressed [ 44.925344] audit: type=1400 audit(1603343643.740:38): apparmor="DENIED" operation="capable" profile="/usr/sbin/cupsd" pid=864 comm="serial" capability=21 capname="sys_admin" [ 44.984116] usblp2: removed [ 44.993077] usblp 8-1.4:1.1: usblp2: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x03F0 pid 0x5D12 [ 44.993252] usblp3: removed [ 45.002447] usblp 8-1.4:1.2: usblp3: USB Bidirectional printer dev 3 if 2 alt 0 proto 2 vid 0x03F0 pid 0x5D12 [ 45.844847] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 45.844980] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 57.405710] rfkill: input handler disabled [ 60.667445] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 62.575461] fwupd[1685]: segfault at 0 ip b7bccb8a sp bfb46fc8 error 4 in libglib-2.0.so.0.5600.2[b7b95000+12e000] [ 87.707579] fwupd[1766]: segfault at 0 ip b7b7ab8a sp bfa7a5b8 error 4 in libglib-2.0.so.0.5600.2[b7b43000+12e000] [ 178.563688] do_IRQ: 0.40 No irq handler for vector [ 322.624024] logitech-hidpp-device 0003:046D:404D.000A: HID++ 4.1 device connected. [ 520.519598] perf: interrupt took too long (2505 > 2500), lowering kernel.perf_event_max_sample_rate to 79750 [ 603.359033] perf: interrupt took too long (3139 > 3131), lowering kernel.perf_event_max_sample_rate to 63500 [ 740.686932] do_IRQ: 0.40 No irq handler for vector [ 868.500328] do_IRQ: 0.40 No irq handler for vector [ 896.304340] SGI XFS with ACLs, security attributes, realtime, no debug enabled [ 896.456130] JFS: nTxBlock = 8192, nTxLock = 65536 [ 896.567371] ntfs: driver 2.1.32 [Flags: R/O MODULE]. [ 896.764338] QNX4 filesystem 0.2.3 registered. [ 896.925190] raid6: mmxx1 gen() 3823 MB/s [ 896.973167] raid6: mmxx2 gen() 4311 MB/s [ 897.021150] raid6: sse1x1 gen() 2500 MB/s [ 897.069150] raid6: sse1x2 gen() 3119 MB/s [ 897.117124] raid6: sse2x1 gen() 4328 MB/s [ 897.165099] raid6: sse2x1 xor() 5052 MB/s [ 897.213082] raid6: sse2x2 gen() 5117 MB/s [ 897.261062] raid6: sse2x2 xor() 6021 MB/s [ 897.261064] raid6: using algorithm sse2x2 gen() 5117 MB/s [ 897.261064] raid6: .... xor() 6021 MB/s, rmw enabled [ 897.261065] raid6: using ssse3x1 recovery algorithm [ 897.279815] xor: measuring software checksum speed [ 897.317039] pIII_sse : 10763.000 MB/sec [ 897.357026] prefetch64-sse: 12112.000 MB/sec [ 897.357028] xor: using function: prefetch64-sse (12112.000 MB/sec) [ 897.472809] Btrfs loaded, crc32c=crc32c-generic [ 1078.532360] perf: interrupt took too long (3935 > 3923), lowering kernel.perf_event_max_sample_rate to 50750 [ 1944.391799] do_IRQ: 0.40 No irq handler for vector [ 2937.856917] do_IRQ: 0.40 No irq handler for vector [ 3155.787816] do_IRQ: 0.40 No irq handler for vector [ 5475.519066] PM: suspend entry (deep) [ 5475.519069] PM: Syncing filesystems ... done. [ 5475.856596] Freezing user space processes ... (elapsed 0.456 seconds) done. [ 5476.312888] OOM killer disabled. [ 5476.312889] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 5476.314088] Suspending console(s) (use no_console_suspend to debug) [ 5476.350753] serial 00:03: disabled [ 5476.351813] parport_pc 00:02: disabled [ 5476.352077] e1000e: EEE TX LPI TIMER: 00000000 [ 5476.370617] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 5476.370805] sd 0:0:0:0: [sda] Stopping disk [ 5476.695441] ACPI: Preparing to enter system sleep state S3 [ 5476.696914] PM: Saving platform NVS memory [ 5476.697249] Disabling non-boot CPUs ... [ 5476.710872] IRQ 25: no longer affine to CPU1 [ 5476.711876] smpboot: CPU 1 is now offline [ 5476.714030] ACPI: Low-level resume complete [ 5476.714069] PM: Restoring platform NVS memory [ 5476.714492] Enabling non-boot CPUs ... [ 5476.714539] x86: Booting SMP configuration: [ 5476.714540] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 5476.715090] Initializing CPU#1 [ 5476.717274] cache: parent cpu1 should not be sleeping [ 5476.717384] hpet: hpet3 irq 25 for MSI [ 5476.717464] CPU1 is up [ 5476.720045] ACPI: Waking up from system sleep state S3 [ 5476.763397] e1000e 0000:00:19.0 eth0: MAC Wakeup cause - Unicast Packet [ 5476.763463] usb usb3: root hub lost power or was reset [ 5476.763496] usb usb4: root hub lost power or was reset [ 5476.763528] usb usb5: root hub lost power or was reset [ 5476.763636] usb usb6: root hub lost power or was reset [ 5476.763668] usb usb7: root hub lost power or was reset [ 5476.763699] usb usb8: root hub lost power or was reset [ 5476.771132] sd 0:0:0:0: [sda] Starting disk [ 5476.786453] parport_pc 00:02: activated [ 5476.794965] serial 00:03: activated [ 5477.083102] ata4: SATA link down (SStatus 4 SControl 300) [ 5477.083146] ata3: SATA link down (SStatus 4 SControl 300) [ 5477.124856] usb 8-1: reset full-speed USB device number 2 using uhci_hcd [ 5477.416868] usb 8-2: reset full-speed USB device number 4 using uhci_hcd [ 5477.552903] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 5477.552915] ata2.01: SATA link down (SStatus 4 SControl 300) [ 5477.552924] ata2.01: link offline, clearing class 3 to NONE [ 5477.612970] ata2.00: configured for UDMA/100 [ 5477.660873] usb 8-1.4: reset full-speed USB device number 3 using uhci_hcd [ 5477.801941] usblp2: removed [ 5477.802008] usblp3: removed [ 5477.802194] OOM killer enabled. [ 5477.802194] Restarting tasks ... [ 5477.802216] ACPI: \_SB_.PCI0.IDE1.PRI1.MAS1: docking [ 5477.809557] done. [ 5477.809562] PM: suspend exit [ 5477.810496] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0xe frozen [ 5477.810499] ata2.00: ACPI event, ACPI event [ 5477.810507] ata2.00: hard resetting link [ 5477.867943] usblp 8-1.4:1.1: usblp2: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x03F0 pid 0x5D12 [ 5477.871900] usblp 8-1.4:1.2: usblp3: USB Bidirectional printer dev 3 if 2 alt 0 proto 2 vid 0x03F0 pid 0x5D12 [ 5478.520894] ata2.01: hard resetting link [ 5478.992954] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 5478.992966] ata2.01: SATA link down (SStatus 4 SControl 300) [ 5478.992975] ata2.01: link offline, clearing class 3 to NONE [ 5479.037010] ata2.00: configured for UDMA/100 [ 5479.099823] ata2: EH complete [ 5479.697770] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 5481.221011] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 5481.221021] ata1.01: SATA link down (SStatus 4 SControl 300) [ 5481.228171] ata1.00: configured for UDMA/133 [ 5488.354575] e1000e: eth0 NIC Link is Down [ 5490.989027] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 5491.169470] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 5493.794196] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 5493.794362] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 5499.651892] fwupd[9457]: segfault at 0 ip b7bc2b8a sp bfd1e8c8 error 4 in libglib-2.0.so.0.5600.2[b7b8b000+12e000] [ 5523.716501] fwupd[9489]: segfault at 0 ip b7b7cb8a sp bff5a8c8 error 4 in libglib-2.0.so.0.5600.2[b7b45000+12e000] [14072.585222] PM: suspend entry (deep) [14072.585225] PM: Syncing filesystems ... done. [14073.060321] Freezing user space processes ... (elapsed 0.076 seconds) done. [14073.136337] OOM killer disabled. [14073.136338] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [14073.137546] Suspending console(s) (use no_console_suspend to debug) [14073.174194] serial 00:03: disabled [14073.175253] parport_pc 00:02: disabled [14073.175493] e1000e: EEE TX LPI TIMER: 00000000 [14073.180337] sd 0:0:0:0: [sda] Synchronizing SCSI cache [14073.227119] sd 0:0:0:0: [sda] Stopping disk [14073.569116] ACPI: Preparing to enter system sleep state S3 [14073.570585] PM: Saving platform NVS memory [14073.570932] Disabling non-boot CPUs ... [14073.584538] IRQ 25: no longer affine to CPU1 [14073.585541] smpboot: CPU 1 is now offline [14073.587686] ACPI: Low-level resume complete [14073.587724] PM: Restoring platform NVS memory [14073.588149] Enabling non-boot CPUs ... [14073.588197] x86: Booting SMP configuration: [14073.588198] smpboot: Booting Node 0 Processor 1 APIC 0x1 [14073.588749] Initializing CPU#1 [14073.590938] cache: parent cpu1 should not be sleeping [14073.591050] hpet: hpet3 irq 25 for MSI [14073.591128] CPU1 is up [14073.593712] ACPI: Waking up from system sleep state S3 [14073.641071] e1000e 0000:00:19.0 eth0: MAC Wakeup cause - Unicast Packet [14073.641382] usb usb3: root hub lost power or was reset [14073.641493] usb usb4: root hub lost power or was reset [14073.641918] sd 0:0:0:0: [sda] Starting disk [14073.644620] usb usb5: root hub lost power or was reset [14073.646078] usb usb6: root hub lost power or was reset [14073.646091] usb usb7: root hub lost power or was reset [14073.646351] usb usb8: root hub lost power or was reset [14073.662774] parport_pc 00:02: activated [14073.670941] serial 00:03: activated [14073.952772] ata4: SATA link down (SStatus 4 SControl 300) [14073.952813] ata3: SATA link down (SStatus 4 SControl 300) [14073.998541] usb 8-1: reset full-speed USB device number 2 using uhci_hcd [14074.282536] usb 8-2: reset full-speed USB device number 4 using uhci_hcd [14074.430579] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [14074.430590] ata2.01: SATA link down (SStatus 4 SControl 300) [14074.430599] ata2.01: link offline, clearing class 3 to NONE [14074.476745] ata2.00: configured for UDMA/100 [14074.518534] usb 8-1.4: reset full-speed USB device number 3 using uhci_hcd [14074.659467] usblp2: removed [14074.659531] usblp3: removed [14074.659715] OOM killer enabled. [14074.659716] Restarting tasks ... done. [14074.667373] PM: suspend exit [14074.667654] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0xe frozen [14074.667658] ata2.00: ACPI event [14074.667667] ata2.00: hard resetting link [14074.725476] usblp 8-1.4:1.1: usblp2: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x03F0 pid 0x5D12 [14074.729426] usblp 8-1.4:1.2: usblp3: USB Bidirectional printer dev 3 if 2 alt 0 proto 2 vid 0x03F0 pid 0x5D12 [14075.378555] ata2.01: hard resetting link [14075.850599] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [14075.850611] ata2.01: SATA link down (SStatus 4 SControl 300) [14075.850621] ata2.01: link offline, clearing class 3 to NONE [14075.910669] ata2.00: configured for UDMA/100 [14075.964538] ata2: EH complete [14076.347403] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [14078.094623] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [14078.094633] ata1.01: SATA link down (SStatus 4 SControl 300) [14078.101782] ata1.00: configured for UDMA/133 [14078.677049] e1000e 0000:00:19.0 eth0: Detected Hardware Unit Hang: TDH <1> TDT <4> next_to_use <4> next_to_clean <1> buffer_info[next_to_clean]: time_stamp <348d3b> next_to_watch <1> jiffies <348f40> next_to_watch.status <0> MAC Status <80083> PHY Status <796d> PHY 1000BASE-T Status <3800> PHY Extended Status <3000> PCI Status <10> [14080.484011] e1000e: eth0 NIC Link is Down [14081.788497] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [14081.970786] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [14084.511502] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [14084.511636] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [15881.090671] PM: suspend entry (deep) [15881.090673] PM: Syncing filesystems ... done. [15881.651138] Freezing user space processes ... (elapsed 0.001 seconds) done. [15881.653082] OOM killer disabled. [15881.653083] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [15881.654291] Suspending console(s) (use no_console_suspend to debug) [15881.690936] serial 00:03: disabled [15881.691993] parport_pc 00:02: disabled [15881.692273] e1000e: EEE TX LPI TIMER: 00000000 [15881.705610] sd 0:0:0:0: [sda] Synchronizing SCSI cache [15881.742792] sd 0:0:0:0: [sda] Stopping disk [15882.086327] ACPI: Preparing to enter system sleep state S3 [15882.087793] PM: Saving platform NVS memory [15882.088117] Disabling non-boot CPUs ... [15882.101746] IRQ 25: no longer affine to CPU1 [15882.102751] smpboot: CPU 1 is now offline [15882.104899] ACPI: Low-level resume complete [15882.104938] PM: Restoring platform NVS memory [15882.105361] Enabling non-boot CPUs ... [15882.105407] x86: Booting SMP configuration: [15882.105408] smpboot: Booting Node 0 Processor 1 APIC 0x1 [15882.105959] Initializing CPU#1 [15882.108154] cache: parent cpu1 should not be sleeping [15882.108267] hpet: hpet3 irq 25 for MSI [15882.108345] CPU1 is up [15882.110958] ACPI: Waking up from system sleep state S3 [15882.162154] e1000e 0000:00:19.0 eth0: MAC Wakeup cause - Unicast Packet [15882.162217] usb usb3: root hub lost power or was reset [15882.162289] usb usb4: root hub lost power or was reset [15882.163528] usb usb5: root hub lost power or was reset [15882.164163] sd 0:0:0:0: [sda] Starting disk [15882.166622] usb usb6: root hub lost power or was reset [15882.166661] usb usb7: root hub lost power or was reset [15882.166977] usb usb8: root hub lost power or was reset [15882.182814] parport_pc 00:02: activated [15882.191580] serial 00:03: activated [15882.473950] ata4: SATA link down (SStatus 4 SControl 300) [15882.473995] ata3: SATA link down (SStatus 4 SControl 300) [15882.519746] usb 8-1: reset full-speed USB device number 2 using uhci_hcd [15882.803742] usb 8-2: reset full-speed USB device number 4 using uhci_hcd [15882.951780] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [15882.951791] ata2.01: SATA link down (SStatus 4 SControl 300) [15882.951800] ata2.01: link offline, clearing class 3 to NONE [15883.011839] ata2.00: configured for UDMA/100 [15883.039736] usb 8-1.4: reset full-speed USB device number 3 using uhci_hcd [15883.180109] usblp2: removed [15883.180175] usblp3: removed [15883.180358] OOM killer enabled. [15883.180359] Restarting tasks ... [15883.200024] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0xe frozen [15883.200028] ata2.00: ACPI event [15883.200036] ata2.00: hard resetting link [15883.200049] done. [15883.200053] PM: suspend exit [15883.256116] usblp 8-1.4:1.1: usblp2: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x03F0 pid 0x5D12 [15883.260078] usblp 8-1.4:1.2: usblp3: USB Bidirectional printer dev 3 if 2 alt 0 proto 2 vid 0x03F0 pid 0x5D12 [15883.911751] ata2.01: hard resetting link [15884.383793] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [15884.383805] ata2.01: SATA link down (SStatus 4 SControl 300) [15884.383814] ata2.01: link offline, clearing class 3 to NONE [15884.449966] ata2.00: configured for UDMA/100 [15884.511610] ata2: EH complete [15884.876596] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [15886.567808] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [15886.567819] ata1.01: SATA link down (SStatus 4 SControl 300) [15886.574978] ata1.00: configured for UDMA/133 [15887.099862] e1000e: eth0 NIC Link is Down [15887.354158] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [15887.535974] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [15890.052638] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [15890.052772] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [15905.777862] fwupd[13841]: segfault at 0 ip b7b8bb8a sp bfd564f8 error 4 in libglib-2.0.so.0.5600.2[b7b54000+12e000] [15930.227529] fwupd[13928]: segfault at 0 ip b7b2fb8a sp bfa56c08 error 4 in libglib-2.0.so.0.5600.2[b7af8000+12e000] [18179.331741] PM: suspend entry (deep) [18179.331743] PM: Syncing filesystems ... done. [18180.346356] Freezing user space processes ... (elapsed 0.054 seconds) done. [18180.401215] OOM killer disabled. [18180.401216] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [18180.402422] Suspending console(s) (use no_console_suspend to debug) [18180.439025] serial 00:03: disabled [18180.440085] parport_pc 00:02: disabled [18180.440570] e1000e: EEE TX LPI TIMER: 00000000 [18180.461224] sd 0:0:0:0: [sda] Synchronizing SCSI cache [18180.522137] sd 0:0:0:0: [sda] Stopping disk [18180.861976] ACPI: Preparing to enter system sleep state S3 [18180.863441] PM: Saving platform NVS memory [18180.863754] Disabling non-boot CPUs ... [18180.877389] IRQ 25: no longer affine to CPU1 [18180.878393] smpboot: CPU 1 is now offline [18180.880523] ACPI: Low-level resume complete [18180.880562] PM: Restoring platform NVS memory [18180.880985] Enabling non-boot CPUs ... [18180.881032] x86: Booting SMP configuration: [18180.881033] smpboot: Booting Node 0 Processor 1 APIC 0x1 [18180.881584] Initializing CPU#1 [18180.883775] cache: parent cpu1 should not be sleeping [18180.883890] hpet: hpet3 irq 25 for MSI [18180.883970] CPU1 is up [18180.886564] ACPI: Waking up from system sleep state S3 [18180.932796] usb usb3: root hub lost power or was reset [18180.932829] usb usb4: root hub lost power or was reset [18180.932863] usb usb5: root hub lost power or was reset [18180.933588] usb usb6: root hub lost power or was reset [18180.933622] usb usb7: root hub lost power or was reset [18180.933653] usb usb8: root hub lost power or was reset [18180.934974] e1000e 0000:00:19.0 eth0: MAC Wakeup cause - Unicast Packet [18180.936337] sd 0:0:0:0: [sda] Starting disk [18180.956792] parport_pc 00:02: activated [18180.965476] serial 00:03: activated [18181.245614] ata3: SATA link down (SStatus 4 SControl 300) [18181.245655] ata4: SATA link down (SStatus 4 SControl 300) [18181.287379] usb 8-1: reset full-speed USB device number 2 using uhci_hcd [18181.571369] usb 8-2: reset full-speed USB device number 4 using uhci_hcd [18181.723441] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [18181.723452] ata2.01: SATA link down (SStatus 4 SControl 300) [18181.723461] ata2.01: link offline, clearing class 3 to NONE [18181.783466] ata2.00: configured for UDMA/100 [18181.807356] usb 8-1.4: reset full-speed USB device number 3 using uhci_hcd [18181.948095] usblp2: removed [18181.948161] usblp3: removed [18181.948343] OOM killer enabled. [18181.948343] Restarting tasks ... [18181.951042] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0xe frozen [18181.951045] ata2.00: ACPI event [18181.951053] ata2.00: hard resetting link [18181.962766] done. [18181.962771] PM: suspend exit [18182.016098] usblp 8-1.4:1.1: usblp2: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x03F0 pid 0x5D12 [18182.020061] usblp 8-1.4:1.2: usblp3: USB Bidirectional printer dev 3 if 2 alt 0 proto 2 vid 0x03F0 pid 0x5D12 [18182.667348] ata2.01: hard resetting link [18183.139378] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [18183.139390] ata2.01: SATA link down (SStatus 4 SControl 300) [18183.139400] ata2.01: link offline, clearing class 3 to NONE [18183.199434] ata2.00: configured for UDMA/100 [18183.259036] ata2: EH complete [18183.932157] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [18185.331330] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [18185.331340] ata1.01: SATA link down (SStatus 4 SControl 300) [18185.356260] ata1.00: configured for UDMA/133 [18187.436659] e1000e: eth0 NIC Link is Down [18187.535044] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [18187.715433] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [18190.408024] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [18190.408159] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [19081.271247] fwupd[16648]: segfault at 0 ip b7b84b8a sp bf8ad168 error 4 in libglib-2.0.so.0.5600.2[b7b4d000+12e000] [20727.803998] do_IRQ: 1.37 No irq handler for vector [22975.603111] fwupd[18849]: segfault at 0 ip b7af7b8a sp bfd7c0d8 error 4 in libglib-2.0.so.0.5600.2[b7ac0000+12e000] [23842.893811] do_IRQ: 1.37 No irq handler for vector