[ 3.467060] [drm:intel_dump_pipe_config] double wide: 0 [ 3.467062] [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0xb0006000, dpll_md: 0x3, fp0: 0x0, fp1: 0x0 [ 3.467063] [drm:intel_dump_pipe_config] planes on this crtc [ 3.467070] [drm:intel_dump_pipe_config] STANDARD PLANE:29 plane: 1.0 idx: 4 enabled [ 3.467073] [drm:intel_dump_pipe_config] FB:57, fb = 1366x768 format = 0x34325258 [ 3.467073] [drm:intel_dump_pipe_config] scaler:0 src (0, 0) 0x0 dst (0, 0) 0x0 [ 3.467075] [drm:intel_dump_pipe_config] CURSOR PLANE:30 plane: 1.2 idx: 5 disabled, scaler_id = 0 [ 3.467078] [drm:intel_dump_pipe_config] STANDARD PLANE:32 plane: 1.1 idx: 6 disabled, scaler_id = 0 [ 3.467080] [drm:intel_dump_pipe_config] STANDARD PLANE:33 plane: 1.2 idx: 7 disabled, scaler_id = 0 [ 3.467105] [drm:intel_set_memory_cxsr] memory self-refresh is disabled [ 3.478590] [drm:intel_set_memory_cxsr] memory self-refresh is disabled [ 3.495424] [drm:intel_edp_backlight_off] [ 3.581071] usb 1-5: New USB device found, idVendor=8087, idProduct=0a2a [ 3.581075] usb 1-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.594286] usbcore: registered new interface driver usbhid [ 3.594288] usbhid: USB HID core driver [ 3.698400] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0 [ 3.698758] [drm:edp_panel_off] Turn eDP port C panel power off [ 3.698767] [drm:wait_panel_off] Wait for panel power off time [ 3.698772] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control abcd0000 [ 3.738755] [drm:intel_get_hpd_pins] hotplug event received, stat 0x00100000, dig 0x00100000, pins 0x00000040 [ 3.738765] [drm:intel_hpd_irq_handler] digital hpd port C - long [ 3.738778] [drm:intel_hpd_irq_storm_detect] Received HPD interrupt on PIN 6 - cnt: 0 [ 3.739060] [drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port C [ 3.739308] [drm:wait_panel_status] Wait complete [ 3.739340] [drm:intel_disable_pipe] disabling pipe B [ 3.746473] [drm:intel_dp_link_down] [ 3.821614] [drm:chv_phy_powergate_lanes] Power gating DPIO PHY0 CH1 lanes 0x0 (PHY_CONTROL=0x050007fd) [ 3.831133] [drm:chv_phy_powergate_lanes] Power gating DPIO PHY0 CH1 lanes 0xe (PHY_CONTROL=0x150707fd) [ 3.925552] [drm:edp_panel_vdd_on] Turning eDP port C VDD on [ 3.925557] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 4.302700] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0000 [ 4.302703] [drm:wait_panel_status] Wait complete [ 4.302710] [drm:edp_panel_vdd_on] PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0008 [ 4.302713] [drm:edp_panel_vdd_on] eDP port C panel power wasn't enabled [ 4.385192] [drm:intel_get_hpd_pins] hotplug event received, stat 0x00100000, dig 0x00100000, pins 0x00000040 [ 4.385201] [drm:intel_hpd_irq_handler] digital hpd port C - long [ 4.385214] [drm:intel_hpd_irq_storm_detect] Received HPD interrupt on PIN 6 - cnt: 1 [ 4.385277] [drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port C [ 4.415529] clocksource: Switched to clocksource tsc [ 4.506710] [drm:edp_panel_on] Turn eDP port C panel power on [ 4.506716] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 4.506723] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0008 [ 4.506727] [drm:wait_panel_status] Wait complete [ 4.506734] [drm:wait_panel_on] Wait for panel power on [ 4.506738] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd000b [ 4.666801] [drm:wait_panel_status] Wait complete [ 4.666807] [drm:edp_panel_vdd_off_sync] Turning eDP port C VDD off [ 4.666817] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0003 [ 4.666831] [drm:edp_panel_vdd_on] Turning eDP port C VDD on [ 4.666837] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b [ 4.695219] [drm:intel_dp_set_signal_levels] Using vswing level 0 [ 4.695226] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0 [ 4.696032] [drm:intel_dp_link_training_clock_recovery] clock recovery OK [ 4.697064] [drm:intel_dp_link_training_channel_equalization] Channel EQ done. DP Training successful [ 4.697280] [drm:intel_enable_pipe] enabling pipe B [ 4.697295] [drm:intel_edp_backlight_on] [ 4.697297] [drm:intel_panel_enable_backlight] pipe B [ 4.697301] [drm:intel_panel_actually_set_backlight] set backlight PWM = 1562 [ 4.697308] [drm:intel_psr_enable] PSR not supported by this panel [ 4.697319] [drm:vlv_pipe_set_fifo_size] Pipe B FIFO split 511 / 511 / 511 [ 4.697327] [drm:vlv_update_wm] Setting FIFO watermarks - B: plane=425, cursor=63, sprite0=0, sprite1=0, SR: plane=0, cursor=0 level=1 cxsr=0 [ 4.714731] [drm:vlv_pipe_set_fifo_size] Pipe B FIFO split 511 / 511 / 511 [ 4.714741] [drm:vlv_update_wm] Setting FIFO watermarks - B: plane=425, cursor=63, sprite0=0, sprite1=0, SR: plane=1449, cursor=0 level=1 cxsr=1 [ 4.714745] [drm:intel_set_memory_cxsr] memory self-refresh is enabled [ 4.714762] [drm:intel_connector_check_state] [CONNECTOR:47:eDP-1] [ 4.714768] [drm:check_encoder_state] [ENCODER:39:TMDS-39] [ 4.714773] [drm:check_encoder_state] [ENCODER:43:TMDS-43] [ 4.714776] [drm:check_encoder_state] [ENCODER:46:TMDS-46] [ 4.714779] [drm:check_encoder_state] [ENCODER:52:TMDS-52] [ 4.714781] [drm:check_encoder_state] [ENCODER:54:TMDS-54] [ 4.714787] [drm:check_crtc_state] [CRTC:31] [ 4.726403] [drm:drm_fb_helper_hotplug_event] [ 4.726409] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:47:eDP-1] [ 4.726412] [drm:intel_dp_detect] [CONNECTOR:47:eDP-1] [ 4.726983] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 4.726989] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:47:eDP-1] probed modes : [ 4.726995] [drm:drm_mode_debug_printmodeline] Modeline 48:"1366x768" 60 75610 1366 1406 1438 1574 768 771 777 800 0x48 0xa [ 4.726998] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:40:DP-1] [ 4.727000] [drm:intel_dp_detect] [CONNECTOR:40:DP-1] [ 4.727006] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:40:DP-1] disconnected [ 4.727008] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:44:HDMI-A-1] [ 4.727011] [drm:intel_hdmi_detect] [CONNECTOR:44:HDMI-A-1] [ 4.815000] [drm:cherryview_enable_rps] GT fifo had a previous error 1080000 [ 4.819747] [drm:cherryview_enable_rps] GPLL enabled? yes [ 4.819760] [drm:cherryview_enable_rps] GPU status: 0x00002010 [ 4.819763] [drm:cherryview_enable_rps] current GPU freq: 320 MHz (32) [ 4.819764] [drm:cherryview_enable_rps] setting GPU freq to 320 MHz (32) [ 4.854865] [drm:intel_hdmi_detect] HDMI live status down [ 4.854875] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:44:HDMI-A-1] disconnected [ 4.854881] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:53:DP-2] [ 4.854883] [drm:intel_dp_detect] [CONNECTOR:53:DP-2] [ 4.854887] [drm:intel_power_well_enable] enabling dpio-common-d [ 4.873529] [drm:chv_dpio_cmn_power_well_enable] Enabled DPIO PHY1 (PHY_CONTROL=0x150707ff) [ 4.885220] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064 [ 4.887687] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064 [ 4.897140] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064 [ 4.905137] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064 [ 4.910660] [drm:intel_power_well_disable] disabling dpio-common-d [ 4.919628] [drm:chv_dpio_cmn_power_well_disable] Disabled DPIO PHY1 (PHY_CONTROL=0x150707fd) [ 4.928392] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:53:DP-2] disconnected [ 4.928397] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:55:HDMI-A-2] [ 4.928400] [drm:intel_hdmi_detect] [CONNECTOR:55:HDMI-A-2] [ 4.929005] [drm:gmbus_xfer] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1) [ 4.929007] [drm:gmbus_xfer] GMBUS [i915 gmbus panel] NAK on first message, retry [ 4.929642] [drm:gmbus_xfer] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1) [ 4.929657] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel [ 4.929662] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:55:HDMI-A-2] disconnected [ 4.929673] [drm:drm_setup_crtcs] [ 4.929677] [drm:drm_enable_connectors] connector 47 enabled? yes [ 4.929678] [drm:drm_enable_connectors] connector 40 enabled? no [ 4.929680] [drm:drm_enable_connectors] connector 44 enabled? no [ 4.929682] [drm:drm_enable_connectors] connector 53 enabled? no [ 4.929683] [drm:drm_enable_connectors] connector 55 enabled? no [ 4.929687] [drm:intel_fb_initial_config] looking for cmdline mode on connector eDP-1 [ 4.929689] [drm:intel_fb_initial_config] looking for preferred mode on connector eDP-1 0 [ 4.929693] [drm:intel_fb_initial_config] connector eDP-1 on pipe B [CRTC:31]: 1366x768 [ 4.929695] [drm:intel_fb_initial_config] connector DP-1 not enabled, skipping [ 4.929696] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping [ 4.929698] [drm:intel_fb_initial_config] connector DP-2 not enabled, skipping [ 4.929699] [drm:intel_fb_initial_config] connector HDMI-A-2 not enabled, skipping [ 4.929703] [drm:drm_setup_crtcs] desired mode 1366x768 set on crtc 31 (0,0) [ 4.929832] Console: switching to colour frame buffer device 170x48 [ 4.936691] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 5.058880] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 5.296623] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN) [ 5.297057] systemd[1]: Detected architecture x86-64. [ 5.308918] systemd[1]: Set hostname to . [ 5.389874] systemd-sysv-generator[200]: Failed to build name: Invalid argument [ 5.486081] systemd[1]: Listening on udev Kernel Socket. [ 5.491460] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 5.496479] systemd[1]: Reached target Encrypted Volumes. [ 5.501571] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 5.506686] systemd[1]: Listening on fsck to fsckd communication Socket. [ 5.511846] systemd[1]: Listening on Journal Socket. [ 5.517109] systemd[1]: Created slice System Slice. [ 5.539683] systemd[1]: Started Braille Device Support. [ 5.549896] systemd[1]: Starting Set console keymap... [ 5.556422] systemd[1]: Started Read required files in advance. [ 5.563252] systemd[1]: Mounting Debug File System... [ 5.575432] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 5.580751] systemd[1]: Listening on Syslog Socket. [ 5.586180] systemd[1]: Listening on Journal Audit Socket. [ 5.591413] systemd[1]: Reached target User and Group Name Lookups. [ 5.596692] systemd[1]: Reached target Remote File Systems (Pre). [ 5.615117] systemd[1]: Mounting POSIX Message Queue File System... [ 5.625788] systemd[1]: Starting Load Kernel Modules... [ 5.663318] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 5.668197] lp: driver loaded but no devices found [ 5.674017] systemd[1]: Mounting Huge Pages File System... [ 5.682652] systemd[1]: Listening on Journal Socket (/dev/log). [ 5.688016] ppdev: user-space parallel port driver [ 5.704371] systemd[1]: Starting Journal Service... [ 5.713142] systemd[1]: Reached target Remote File Systems. [ 5.718445] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 5.724258] systemd[1]: Listening on udev Control Socket. [ 5.743357] systemd[1]: Starting Uncomplicated firewall... [ 5.748339] systemd[1]: Created slice User and Session Slice. [ 5.755003] systemd[1]: Reached target Slices. [ 5.764556] systemd[1]: Mounted POSIX Message Queue File System. [ 5.771856] systemd[1]: Mounted Debug File System. [ 5.777192] systemd[1]: Mounted Huge Pages File System. [ 5.783882] systemd[1]: Started Load Kernel Modules. [ 5.790884] systemd[1]: Started Create list of required static device nodes for the current kernel. [ 5.796213] systemd[1]: Started Uncomplicated firewall. [ 5.863520] systemd[1]: Started Set console keymap. [ 5.871216] systemd[1]: Started Journal Service. [ 6.382896] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro [ 6.445014] systemd-journald[245]: Received request to flush runtime journal from PID 1 [ 6.797116] random: nonblocking pool is initialized [ 6.828867] dw_dmac INTL9C60:01: DesignWare DMA Controller, 8 channels [ 6.865401] input: Intel Virtual Button driver as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/INT33D6:00/input/input5 [ 6.909143] nfc: nfc_init: NFC Core ver 0.1 [ 6.909180] NET: Registered protocol family 39 [ 6.976762] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 7.080674] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=1562/1562 [ 7.080682] [drm:intel_panel_actually_set_backlight] set backlight PWM = 1562 [ 7.117310] Bluetooth: Core ver 2.21 [ 7.117341] NET: Registered protocol family 31 [ 7.117344] Bluetooth: HCI device and connection manager initialized [ 7.117352] Bluetooth: HCI socket layer initialized [ 7.117357] Bluetooth: L2CAP socket layer initialized [ 7.117377] Bluetooth: SCO socket layer initialized [ 7.140584] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 7.146178] media: Linux media interface: v0.10 [ 7.152761] input: Raydium Corporation Raydium Touch System as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:2386:0401.0001/input/input6 [ 7.158528] hid-multitouch 0003:2386:0401.0001: input,hiddev0,hidraw0: USB HID v1.10 Device [Raydium Corporation Raydium Touch System] on usb-0000:00:14.0-4/input0 [ 7.164923] Linux video capture interface: v2.00 [ 7.167972] usbcore: registered new interface driver btusb [ 7.177378] hid-multitouch 0018:04F3:3010.0003: Ignoring the extra HID_DG_INPUTMODE [ 7.177498] input: ELAN0501:00 04F3:3010 Touchpad as /devices/pci0000:00/808622C1:05/i2c-10/i2c-ELAN0501:00/0018:04F3:3010.0003/input/input8 [ 7.186434] Bluetooth: hci0: read Intel version: 370810011003110e00 [ 7.187891] hid-multitouch 0018:04F3:3010.0003: input,hidraw1: I2C HID v1.00 Mouse [ELAN0501:00 04F3:3010] on i2c-ELAN0501:00 [ 7.202193] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC255: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 7.202201] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 7.202205] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 7.202208] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 7.202211] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 7.202214] snd_hda_codec_realtek hdaudioC0D0: Mic=0x12 [ 7.216288] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq [ 7.233413] Intel(R) Wireless WiFi driver for Linux [ 7.233419] Copyright(c) 2003- 2015 Intel Corporation [ 7.235491] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-19.ucode failed with error -2 [ 7.239779] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-18.ucode failed with error -2 [ 7.239831] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-17.ucode failed with error -2 [ 7.246820] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 7.246975] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 7.265408] iwlwifi 0000:02:00.0: loaded firmware version 16.242414.0 op_mode iwlmvm [ 7.296961] Adding 1915900k swap on /dev/mmcblk0p3. Priority:-1 extents:1 across:1915900k SSFS [ 7.359251] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 3165, REV=0x210 [ 7.359778] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled [ 7.359994] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled [ 7.395112] uvcvideo: Found UVC 1.00 device HD WebCam (04f2:b520) [ 7.413944] input: HD WebCam as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/input/input11 [ 7.414627] usbcore: registered new interface driver uvcvideo [ 7.414632] USB Video Class driver (1.1.1) [ 7.457272] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' [ 7.477584] SSE version of gcm_enc/dec engaged. [ 7.545606] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated [ 7.735869] [drm:edp_panel_vdd_off_sync] Turning eDP port C VDD off [ 7.735881] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007 [ 7.863497] audit: type=1400 audit(1479384155.807:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=540 comm="apparmor_parser" [ 7.863514] audit: type=1400 audit(1479384155.807:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=540 comm="apparmor_parser" [ 7.863526] audit: type=1400 audit(1479384155.807:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=540 comm="apparmor_parser" [ 7.863537] audit: type=1400 audit(1479384155.807:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=540 comm="apparmor_parser" [ 7.871885] audit: type=1400 audit(1479384155.815:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=539 comm="apparmor_parser" [ 7.871905] audit: type=1400 audit(1479384155.819:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=539 comm="apparmor_parser" [ 7.909854] audit: type=1400 audit(1479384155.855:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=567 comm="apparmor_parser" [ 7.909875] audit: type=1400 audit(1479384155.855:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=567 comm="apparmor_parser" [ 7.919220] acer_wmi: Acer Laptop ACPI-WMI Extras [ 7.919309] acer_wmi: Function bitmap for Communication Button: 0x801 [ 7.927569] audit: type=1400 audit(1479384155.871:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=571 comm="apparmor_parser" [ 7.960826] audit: type=1400 audit(1479384155.907:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=559 comm="apparmor_parser" [ 8.047264] intel_rapl: Found RAPL domain package [ 8.047272] intel_rapl: Found RAPL domain core [ 8.080195] acer_wmi: Enabling Launch Manager failed: 0xe4 - 0x0 [ 8.080322] input: Acer WMI hotkeys as /devices/virtual/input/input12 [ 8.201345] input: Acer BMA150 accelerometer as /devices/virtual/input/input13 [ 8.447944] cfg80211: World regulatory domain updated: [ 8.447953] cfg80211: DFS Master region: unset [ 8.447955] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 8.447960] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 8.447963] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 8.447966] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 8.447969] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 8.447973] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 8.447976] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 8.447979] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 8.447981] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 8.507797] [drm:i915_gem_open] [ 8.508060] [drm:i915_gem_open] [ 8.509025] [drm:i915_gem_open] [ 8.509192] [drm:i915_gem_open] [ 8.518920] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0 [ 8.817002] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 8.817003] Bluetooth: BNEP filters: protocol multicast [ 8.817013] Bluetooth: BNEP socket layer initialized [ 9.440785] [drm:i915_gem_open] [ 9.490193] [drm:i915_gem_open] [ 9.490287] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[5] ENCODERS[5] [ 9.493533] [drm:i915_gem_open] [ 9.493613] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[5] ENCODERS[5] [ 9.493619] [drm:drm_mode_getresources] [CRTC:26] [ 9.493621] [drm:drm_mode_getresources] [CRTC:31] [ 9.493623] [drm:drm_mode_getresources] [CRTC:36] [ 9.493626] [drm:drm_mode_getresources] [ENCODER:39:TMDS-39] [ 9.493628] [drm:drm_mode_getresources] [ENCODER:43:TMDS-43] [ 9.493631] [drm:drm_mode_getresources] [ENCODER:46:TMDS-46] [ 9.493633] [drm:drm_mode_getresources] [ENCODER:52:TMDS-52] [ 9.493635] [drm:drm_mode_getresources] [ENCODER:54:TMDS-54] [ 9.493637] [drm:drm_mode_getresources] [CONNECTOR:47:eDP-1] [ 9.493640] [drm:drm_mode_getresources] [CONNECTOR:40:DP-1] [ 9.493642] [drm:drm_mode_getresources] [CONNECTOR:44:HDMI-A-1] [ 9.493644] [drm:drm_mode_getresources] [CONNECTOR:53:DP-2] [ 9.493647] [drm:drm_mode_getresources] [CONNECTOR:55:HDMI-A-2] [ 9.493649] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[5] ENCODERS[5] [ 9.496164] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[5] ENCODERS[5] [ 9.496196] [drm:drm_mode_addfb2] [FB:59] [ 9.496451] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 9.496457] [drm:i915_pages_create_for_stolen] offset=0x418000, size=16384 [ 9.497099] [drm:internal_framebuffer_create] could not create framebuffer [ 9.497118] [drm:internal_framebuffer_create] could not create framebuffer [ 9.497148] [drm:drm_mode_addfb2] [FB:59] [ 9.497267] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[5] ENCODERS[5] [ 9.497273] [drm:drm_mode_getresources] [CRTC:26] [ 9.497275] [drm:drm_mode_getresources] [CRTC:31] [ 9.497278] [drm:drm_mode_getresources] [CRTC:36] [ 9.497281] [drm:drm_mode_getresources] [ENCODER:39:TMDS-39] [ 9.497285] [drm:drm_mode_getresources] [ENCODER:43:TMDS-43] [ 9.497287] [drm:drm_mode_getresources] [ENCODER:46:TMDS-46] [ 9.497289] [drm:drm_mode_getresources] [ENCODER:52:TMDS-52] [ 9.497292] [drm:drm_mode_getresources] [ENCODER:54:TMDS-54] [ 9.497294] [drm:drm_mode_getresources] [CONNECTOR:47:eDP-1] [ 9.497296] [drm:drm_mode_getresources] [CONNECTOR:40:DP-1] [ 9.497299] [drm:drm_mode_getresources] [CONNECTOR:44:HDMI-A-1] [ 9.497301] [drm:drm_mode_getresources] [CONNECTOR:53:DP-2] [ 9.497303] [drm:drm_mode_getresources] [CONNECTOR:55:HDMI-A-2] [ 9.497306] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[5] ENCODERS[5] [ 9.497474] [drm:drm_mode_getconnector] [CONNECTOR:47:?] [ 9.497505] [drm:drm_mode_getconnector] [CONNECTOR:47:?] [ 9.509198] [drm:drm_mode_getconnector] [CONNECTOR:40:?] [ 9.509221] [drm:drm_mode_getconnector] [CONNECTOR:40:?] [ 9.509306] [drm:drm_mode_getconnector] [CONNECTOR:44:?] [ 9.509315] [drm:drm_mode_getconnector] [CONNECTOR:44:?] [ 9.509389] [drm:drm_mode_getconnector] [CONNECTOR:53:?] [ 9.509398] [drm:drm_mode_getconnector] [CONNECTOR:53:?] [ 9.509468] [drm:drm_mode_getconnector] [CONNECTOR:55:?] [ 9.509477] [drm:drm_mode_getconnector] [CONNECTOR:55:?] [ 9.571859] [drm:drm_mode_addfb2] [FB:59] [ 9.877844] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 9.878084] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled [ 9.878306] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled [ 9.916714] [drm:drm_mode_setcrtc] [CRTC:31] [ 9.916730] [drm:drm_mode_setcrtc] [CONNECTOR:47:eDP-1] [ 9.917800] [drm:vlv_pipe_set_fifo_size] Pipe B FIFO split 511 / 511 / 511 [ 9.940864] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled [ 9.941087] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled [ 9.961894] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 9.983673] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready [ 10.011743] r8169 0000:01:00.0 enp1s0: link down [ 10.011847] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready [ 10.468092] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 10.643493] [drm:i915_gem_open] [ 10.813079] [drm:vlv_pipe_set_fifo_size] Pipe B FIFO split 511 / 511 / 511 [ 10.813092] [drm:vlv_update_wm] Setting FIFO watermarks - B: plane=425, cursor=0, sprite0=0, sprite1=0, SR: plane=1449, cursor=0 level=1 cxsr=1 [ 11.512350] [drm:drm_mode_getconnector] [CONNECTOR:47:?] [ 11.512361] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:47:eDP-1] [ 11.512365] [drm:intel_dp_detect] [CONNECTOR:47:eDP-1] [ 11.512388] [drm:edp_panel_vdd_on] Turning eDP port C VDD on [ 11.512398] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f [ 11.513288] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 11.513297] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:47:eDP-1] probed modes : [ 11.513303] [drm:drm_mode_debug_printmodeline] Modeline 48:"1366x768" 60 75610 1366 1406 1438 1574 768 771 777 800 0x48 0xa [ 11.513315] [drm:drm_mode_getconnector] [CONNECTOR:47:?] [ 11.513818] [drm:drm_mode_getconnector] [CONNECTOR:40:?] [ 11.513823] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:40:DP-1] [ 11.513827] [drm:intel_dp_detect] [CONNECTOR:40:DP-1] [ 11.513834] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:40:DP-1] disconnected [ 11.513843] [drm:drm_mode_getconnector] [CONNECTOR:53:?] [ 11.513847] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:53:DP-2] [ 11.513849] [drm:intel_dp_detect] [CONNECTOR:53:DP-2] [ 11.513853] [drm:intel_power_well_enable] enabling dpio-common-d [ 11.529482] [drm:chv_dpio_cmn_power_well_enable] Enabled DPIO PHY1 (PHY_CONTROL=0x150707ff) [ 11.546288] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064 [ 11.551006] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064 [ 11.560254] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064 [ 11.568051] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064 [ 11.573506] [drm:intel_power_well_disable] disabling dpio-common-d [ 11.581511] [drm:chv_dpio_cmn_power_well_disable] Disabled DPIO PHY1 (PHY_CONTROL=0x150707fd) [ 11.589535] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:53:DP-2] disconnected [ 11.589572] [drm:drm_mode_getconnector] [CONNECTOR:44:?] [ 11.589577] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:44:HDMI-A-1] [ 11.589580] [drm:intel_hdmi_detect] [CONNECTOR:44:HDMI-A-1] [ 11.717570] [drm:intel_hdmi_detect] HDMI live status down [ 11.717587] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:44:HDMI-A-1] disconnected [ 11.717616] [drm:drm_mode_getconnector] [CONNECTOR:55:?] [ 11.717621] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:55:HDMI-A-2] [ 11.717624] [drm:intel_hdmi_detect] [CONNECTOR:55:HDMI-A-2] [ 11.717800] [drm:gmbus_xfer] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1) [ 11.717803] [drm:gmbus_xfer] GMBUS [i915 gmbus panel] NAK on first message, retry [ 11.717966] [drm:gmbus_xfer] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1) [ 11.717971] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel [ 11.717975] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:55:HDMI-A-2] disconnected [ 11.933858] [drm:drm_mode_getconnector] [CONNECTOR:47:?] [ 12.010320] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 12.010332] [drm:i915_pages_create_for_stolen] offset=0x41c000, size=16384 [ 12.102744] Bluetooth: RFCOMM TTY layer initialized [ 12.102762] Bluetooth: RFCOMM socket layer initialized [ 12.102777] Bluetooth: RFCOMM ver 1.11 [ 12.396869] [drm:drm_mode_setcrtc] [CRTC:31] [ 12.396921] [drm:intel_set_memory_cxsr] memory self-refresh is disabled [ 12.411693] [drm:intel_set_memory_cxsr] memory self-refresh is disabled [ 12.428365] [drm:intel_edp_backlight_off] [ 12.629967] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0 [ 12.630152] [drm:edp_panel_off] Turn eDP port C panel power off [ 12.630157] [drm:wait_panel_off] Wait for panel power off time [ 12.630163] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control abcd0000 [ 12.669891] [drm:intel_get_hpd_pins] hotplug event received, stat 0x00100000, dig 0x00100000, pins 0x00000040 [ 12.669899] [drm:intel_hpd_irq_handler] digital hpd port C - long [ 12.669902] [drm:intel_hpd_irq_storm_detect] Received HPD interrupt on PIN 6 - cnt: 0 [ 12.669928] [drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port C [ 12.669979] [drm:wait_panel_status] Wait complete [ 12.669998] [drm:intel_disable_pipe] disabling pipe B [ 12.680024] [drm:intel_dp_link_down] [ 12.752780] [drm:chv_phy_powergate_lanes] Power gating DPIO PHY0 CH1 lanes 0x0 (PHY_CONTROL=0x050007fd) [ 12.773144] [drm:intel_update_cdclk] Current CD clock rate: 200000 kHz [ 12.773157] [drm:intel_power_well_disable] disabling dpio-common-bc [ 12.784603] [drm:chv_dpio_cmn_power_well_disable] Disabled DPIO PHY0 (PHY_CONTROL=0x050007fc) [ 12.793587] [drm:vlv_pipe_set_fifo_size] Pipe B FIFO split 511 / 511 / 511 [ 12.793604] [drm:vlv_update_wm] Setting FIFO watermarks - B: plane=0, cursor=0, sprite0=0, sprite1=0, SR: plane=0, cursor=0 level=1 cxsr=0 [ 12.793618] [drm:intel_connector_check_state] [CONNECTOR:47:eDP-1] [ 12.793624] [drm:check_encoder_state] [ENCODER:39:TMDS-39] [ 12.793631] [drm:check_encoder_state] [ENCODER:43:TMDS-43] [ 12.793636] [drm:check_encoder_state] [ENCODER:46:TMDS-46] [ 12.793639] [drm:check_encoder_state] [ENCODER:52:TMDS-52] [ 12.793644] [drm:check_encoder_state] [ENCODER:54:TMDS-54] [ 12.793653] [drm:check_crtc_state] [CRTC:31] [ 12.794914] [drm:drm_mode_setcrtc] [CRTC:26] [ 12.794924] [drm:drm_mode_setcrtc] [CONNECTOR:47:eDP-1] [ 12.794942] [drm:connected_sink_compute_bpp] [CONNECTOR:47:eDP-1] checking for sink bpp constrains [ 12.794946] [drm:connected_sink_compute_bpp] clamping display bpp (was 30) to EDID reported max of 18 [ 12.794952] [drm:intel_dp_compute_config] DP link computation with max lane count 1 max bw 270000 pixel clock 75610KHz [ 12.794956] [drm:intel_dp_compute_config] DP link bw 0a rate select 00 lane count 1 clock 270000 bpp 18 [ 12.794959] [drm:intel_dp_compute_config] DP link bw required 136098 available 216000 [ 12.794962] [drm:intel_modeset_pipe_config] hw max bpp: 30, pipe bpp: 18, dithering: 1 [ 12.794967] [drm:intel_dump_pipe_config] [CRTC:26][modeset] config ffff880034e18800 for pipe A [ 12.794969] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 12.794972] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1 [ 12.794975] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 12.794978] [drm:intel_dump_pipe_config] dp: 1, lanes: 1, gmch_m: 2642761, gmch_n: 4194304, link_m: 146820, link_n: 524288, tu: 64 [ 12.794981] [drm:intel_dump_pipe_config] dp: 1, lanes: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 12.794984] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 12.794986] [drm:intel_dump_pipe_config] requested mode: [ 12.794990] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 75610 1366 1406 1438 1574 768 771 777 800 0x0 0xa [ 12.794993] [drm:intel_dump_pipe_config] adjusted mode: [ 12.794997] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 75610 1366 1406 1438 1574 768 771 777 800 0x48 0xa [ 12.795001] [drm:intel_dump_crtc_timings] crtc timings: 75610 1366 1406 1438 1574 768 771 777 800, type: 0x48 flags: 0xa [ 12.795003] [drm:intel_dump_pipe_config] port clock: 270000 [ 12.795005] [drm:intel_dump_pipe_config] pipe src size: 1366x768 [ 12.795008] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0 [ 12.795011] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 12.795013] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 12.795016] [drm:intel_dump_pipe_config] ips: 0 [ 12.795018] [drm:intel_dump_pipe_config] double wide: 0 [ 12.795020] [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0x0, dpll_md: 0x0, fp0: 0x0, fp1: 0x0 [ 12.795023] [drm:intel_dump_pipe_config] planes on this crtc [ 12.795026] [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 0.0 idx: 0 disabled, scaler_id = 0 [ 12.795029] [drm:intel_dump_pipe_config] CURSOR PLANE:25 plane: 0.1 idx: 1 disabled, scaler_id = 0 [ 12.795032] [drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 0.1 idx: 2 disabled, scaler_id = 0 [ 12.795036] [drm:intel_dump_pipe_config] STANDARD PLANE:28 plane: 0.2 idx: 3 disabled, scaler_id = 0 [ 12.795055] [drm:intel_set_memory_cxsr] memory self-refresh is disabled [ 12.795062] [drm:intel_power_well_enable] enabling dpio-common-bc [ 12.813775] [drm:chv_dpio_cmn_power_well_enable] Enabled DPIO PHY0 (PHY_CONTROL=0x050007fd) [ 12.832509] [drm:intel_update_cdclk] Current CD clock rate: 266667 kHz [ 12.832573] [drm:chv_phy_powergate_lanes] Power gating DPIO PHY0 CH1 lanes 0xe (PHY_CONTROL=0x150707fd) [ 12.925269] [drm:vlv_detach_power_sequencer] detaching pipe B power sequencer from port C [ 12.925282] [drm:vlv_init_panel_power_sequencer] initializing pipe A power sequencer for port C [ 12.925294] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x87d00001, PP_OFF 0x1f40001, PP_DIV 0x270f06 [ 12.925307] [drm:edp_panel_vdd_on] Turning eDP port C VDD on [ 12.925314] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 13.234490] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0000 [ 13.234500] [drm:wait_panel_status] Wait complete [ 13.234512] [drm:edp_panel_vdd_on] PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0008 [ 13.234516] [drm:edp_panel_vdd_on] eDP port C panel power wasn't enabled [ 13.317112] [drm:intel_get_hpd_pins] hotplug event received, stat 0x00100000, dig 0x00100000, pins 0x00000040 [ 13.317139] [drm:intel_hpd_irq_handler] digital hpd port C - long [ 13.317156] [drm:intel_hpd_irq_storm_detect] Received HPD interrupt on PIN 6 - cnt: 1 [ 13.317443] [drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port C [ 13.438580] [drm:edp_panel_on] Turn eDP port C panel power on [ 13.438591] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 13.438601] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0008 [ 13.438605] [drm:wait_panel_status] Wait complete [ 13.438615] [drm:wait_panel_on] Wait for panel power on [ 13.438621] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd000b [ 13.598483] [drm:wait_panel_status] Wait complete [ 13.598494] [drm:edp_panel_vdd_off_sync] Turning eDP port C VDD off [ 13.598504] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0003 [ 13.598518] [drm:edp_panel_vdd_on] Turning eDP port C VDD on [ 13.598526] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b [ 13.622819] [drm:intel_dp_set_signal_levels] Using vswing level 0 [ 13.622826] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0 [ 13.623581] [drm:intel_dp_link_training_clock_recovery] clock recovery OK [ 13.624588] [drm:intel_dp_link_training_channel_equalization] Channel EQ done. DP Training successful [ 13.624794] [drm:intel_enable_pipe] enabling pipe A [ 13.624812] [drm:intel_edp_backlight_on] [ 13.624815] [drm:intel_panel_enable_backlight] pipe A [ 13.624820] [drm:intel_panel_actually_set_backlight] set backlight PWM = 1562 [ 13.624828] [drm:intel_psr_enable] PSR not supported by this panel [ 13.624840] [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511 [ 13.624849] [drm:vlv_update_wm] Setting FIFO watermarks - A: plane=425, cursor=63, sprite0=0, sprite1=0, SR: plane=0, cursor=0 level=1 cxsr=0 [ 13.642038] [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511 [ 13.642056] [drm:vlv_update_wm] Setting FIFO watermarks - A: plane=425, cursor=63, sprite0=0, sprite1=0, SR: plane=1449, cursor=0 level=1 cxsr=1 [ 13.642064] [drm:intel_set_memory_cxsr] memory self-refresh is enabled [ 13.658627] [drm:intel_connector_check_state] [CONNECTOR:47:eDP-1] [ 13.658639] [drm:check_encoder_state] [ENCODER:39:TMDS-39] [ 13.658647] [drm:check_encoder_state] [ENCODER:43:TMDS-43] [ 13.658652] [drm:check_encoder_state] [ENCODER:46:TMDS-46] [ 13.658656] [drm:check_encoder_state] [ENCODER:52:TMDS-52] [ 13.658659] [drm:check_encoder_state] [ENCODER:54:TMDS-54] [ 13.658663] [drm:check_crtc_state] [CRTC:26] [ 13.670621] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=1562/1562 [ 13.670630] [drm:intel_panel_actually_set_backlight] set backlight PWM = 1562 [ 13.671739] [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511 [ 13.671754] [drm:vlv_update_wm] Setting FIFO watermarks - A: plane=425, cursor=0, sprite0=0, sprite1=0, SR: plane=1449, cursor=0 level=1 cxsr=1 [ 13.687686] [drm:drm_mode_getconnector] [CONNECTOR:47:?] [ 13.688160] [drm:drm_mode_getconnector] [CONNECTOR:47:?] [ 13.688477] [drm:drm_mode_getconnector] [CONNECTOR:47:?] [ 13.839376] [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511 [ 13.839390] [drm:vlv_update_wm] Setting FIFO watermarks - A: plane=425, cursor=63, sprite0=0, sprite1=0, SR: plane=1449, cursor=0 level=1 cxsr=1 [ 13.867314] [drm:drm_mode_getconnector] [CONNECTOR:47:?] [ 13.867798] [drm:drm_mode_getconnector] [CONNECTOR:47:?] [ 13.868582] [drm:drm_mode_getconnector] [CONNECTOR:47:?] [ 13.884978] [drm:drm_mode_getconnector] [CONNECTOR:47:?] [ 13.885465] [drm:drm_mode_getconnector] [CONNECTOR:47:?] [ 13.885884] [drm:drm_mode_getconnector] [CONNECTOR:47:?] [ 13.989173] [drm:drm_mode_getconnector] [CONNECTOR:47:?] [ 13.989645] [drm:drm_mode_getconnector] [CONNECTOR:47:?] [ 13.989964] [drm:drm_mode_getconnector] [CONNECTOR:47:?] [ 14.340985] [drm:drm_mode_getconnector] [CONNECTOR:47:?] [ 16.628125] [drm:edp_panel_vdd_off_sync] Turning eDP port C VDD off [ 16.628139] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007 [ 21.262685] [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511 [ 21.262700] [drm:vlv_update_wm] Setting FIFO watermarks - A: plane=425, cursor=0, sprite0=0, sprite1=0, SR: plane=1449, cursor=0 level=1 cxsr=1 [ 21.578144] [drm:i915_gem_open] [ 21.618262] [drm:i915_gem_context_create_ioctl] HW context 1 created [ 21.620586] [drm:drm_mode_addfb2] [FB:61] [ 21.623877] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 21.623886] [drm:i915_pages_create_for_stolen] offset=0x420000, size=16384 [ 21.625378] [drm:i915_gem_context_destroy_ioctl] HW context 1 destroyed [ 21.894144] wlp2s0: authenticate with 00:24:01:6b:34:76 [ 21.899504] wlp2s0: send auth to 00:24:01:6b:34:76 (try 1/3) [ 21.901895] wlp2s0: authenticated [ 21.909940] wlp2s0: associate with 00:24:01:6b:34:76 (try 1/3) [ 21.914749] wlp2s0: RX AssocResp from 00:24:01:6b:34:76 (capab=0x421 status=0 aid=2) [ 21.916816] wlp2s0: associated [ 21.916893] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready [ 22.000644] wlp2s0: Limiting TX power to 27 (27 - 0) dBm as advertised by 00:24:01:6b:34:76 [ 23.246170] [drm:i915_gem_open] [ 23.357972] [drm:i915_gem_context_create_ioctl] HW context 1 created [ 23.362206] [drm:drm_mode_addfb2] [FB:62] [ 23.380366] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 23.380377] [drm:i915_pages_create_for_stolen] offset=0x420000, size=16384 [ 23.381082] [drm:i915_gem_context_destroy_ioctl] HW context 1 destroyed [ 23.422752] [drm:drm_mode_getconnector] [CONNECTOR:47:?] [ 23.550407] [drm:i915_gem_open] [ 23.576477] [drm:i915_gem_context_create_ioctl] HW context 1 created [ 23.578225] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 23.578237] [drm:i915_pages_create_for_stolen] offset=0x424000, size=16384 [ 23.579007] [drm:i915_gem_context_destroy_ioctl] HW context 1 destroyed [ 23.590899] [drm:i915_gem_open] [ 23.621803] [drm:i915_gem_context_create_ioctl] HW context 1 created [ 23.627598] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 23.627608] [drm:i915_pages_create_for_stolen] offset=0x428000, size=16384 [ 23.633687] [drm:i915_gem_context_destroy_ioctl] HW context 1 destroyed [ 23.658647] [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511 [ 23.658735] [drm:vlv_update_wm] Setting FIFO watermarks - A: plane=425, cursor=63, sprite0=0, sprite1=0, SR: plane=1449, cursor=0 level=1 cxsr=1 [ 23.659067] [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511 [ 23.659077] [drm:vlv_update_wm] Setting FIFO watermarks - A: plane=425, cursor=0, sprite0=0, sprite1=0, SR: plane=1449, cursor=0 level=1 cxsr=1 [ 23.715754] [drm:drm_mode_getconnector] [CONNECTOR:47:?] [ 23.716242] [drm:drm_mode_getconnector] [CONNECTOR:47:?] [ 23.716577] [drm:drm_mode_getconnector] [CONNECTOR:47:?] [ 23.924604] [drm:drm_mode_getconnector] [CONNECTOR:47:?] [ 24.035861] [drm:i915_gem_open] [ 24.144420] [drm:i915_gem_context_create_ioctl] HW context 1 created [ 24.148772] [drm:drm_mode_addfb2] [FB:63] [ 24.172021] [drm:drm_mode_getconnector] [CONNECTOR:47:?] [ 24.263104] [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511 [ 24.263117] [drm:vlv_update_wm] Setting FIFO watermarks - A: plane=425, cursor=63, sprite0=0, sprite1=0, SR: plane=1449, cursor=0 level=1 cxsr=1 [ 24.337701] [drm:drm_mode_getconnector] [CONNECTOR:47:?] [ 27.455424] FAT-fs (mmcblk1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 28.247913] [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511 [ 28.247928] [drm:vlv_update_wm] Setting FIFO watermarks - A: plane=425, cursor=0, sprite0=0, sprite1=0, SR: plane=1449, cursor=0 level=1 cxsr=1 [ 28.486820] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 28.486831] [drm:i915_pages_create_for_stolen] offset=0x420000, size=16384 [ 29.927961] [drm:drm_mode_addfb2] [FB:64] [ 63.288658] wlp2s0: deauthenticating from 00:24:01:6b:34:76 by local choice (Reason: 3=DEAUTH_LEAVING) [ 63.871565] wlp2s0: authenticate with 1c:aa:07:ec:1c:e0 [ 63.877312] wlp2s0: send auth to 1c:aa:07:ec:1c:e0 (try 1/3) [ 63.879121] wlp2s0: authenticated [ 63.880812] iwlwifi 0000:02:00.0 wlp2s0: disabling HT as WMM/QoS is not supported by the AP [ 63.880819] iwlwifi 0000:02:00.0 wlp2s0: disabling VHT as WMM/QoS is not supported by the AP [ 63.884127] wlp2s0: associate with 1c:aa:07:ec:1c:e0 (try 1/3) [ 63.886817] wlp2s0: RX AssocResp from 1c:aa:07:ec:1c:e0 (capab=0x411 status=0 aid=2) [ 63.895686] wlp2s0: associated [ 77.466481] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 77.466500] [drm:i915_pages_create_for_stolen] offset=0x424000, size=16384 [ 78.951590] [drm:i915_gem_open] [ 78.991438] [drm:i915_gem_context_create_ioctl] HW context 1 created [ 78.994957] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 78.994966] [drm:i915_pages_create_for_stolen] offset=0x428000, size=16384 [ 78.999349] [drm:i915_gem_context_destroy_ioctl] HW context 1 destroyed [ 1054.167048] [drm:i915_gem_open] [ 1054.198486] [drm:i915_gem_context_create_ioctl] HW context 1 created [ 1054.199336] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 1054.199345] [drm:i915_pages_create_for_stolen] offset=0x428000, size=16384 [ 1054.200944] [drm:i915_gem_context_destroy_ioctl] HW context 1 destroyed [ 2142.723347] perf interrupt took too long (2538 > 2500), lowering kernel.perf_event_max_sample_rate to 50000 [ 2214.097827] [drm:drm_mode_addfb2] [FB:65] [ 3539.367464] intel-vbtn INT33D6:00: unknown event index 0xcd [ 3539.367591] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 3539.368318] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 3539.368496] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 3539.368599] acpi device:17: Cannot transition to power state D3hot for parent in (unknown) [ 3539.368711] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 3539.368742] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 3539.368894] pci_bus 0000:01: Allocating resources [ 3539.368916] pcieport 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000 [ 3539.368927] pci_bus 0000:02: Allocating resources [ 3539.368963] pcieport 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000 [ 3539.368968] pcieport 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000 [ 3539.368972] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 3539.368979] pcieport 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 3539.368983] pcieport 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 3539.368988] pcieport 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 3539.368992] pcieport 0000:00:1c.1: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 3539.368996] pcieport 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000 [ 3539.369000] pcieport 0000:00:1c.1: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000 [ 3539.369015] pcieport 0000:00:1c.0: BAR 15: assigned [mem 0x91500000-0x916fffff 64bit pref] [ 3539.369025] pcieport 0000:00:1c.1: BAR 15: assigned [mem 0x91700000-0x918fffff 64bit pref] [ 3539.369031] pcieport 0000:00:1c.1: BAR 13: assigned [io 0x3000-0x3fff] [ 3539.369068] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 3539.369289] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 3539.369424] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 3539.394273] [drm:drm_mode_getconnector] [CONNECTOR:47:?] [ 3539.394283] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:47:eDP-1] [ 3539.394287] [drm:intel_dp_detect] [CONNECTOR:47:eDP-1] [ 3539.394302] [drm:edp_panel_vdd_on] Turning eDP port C VDD on [ 3539.394311] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f [ 3539.394940] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 3539.394952] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:47:eDP-1] probed modes : [ 3539.394957] [drm:drm_mode_debug_printmodeline] Modeline 48:"1366x768" 60 75610 1366 1406 1438 1574 768 771 777 800 0x48 0xa [ 3539.394970] [drm:drm_mode_getconnector] [CONNECTOR:47:?] [ 3539.409022] [drm:drm_mode_getconnector] [CONNECTOR:40:?] [ 3539.409032] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:40:DP-1] [ 3539.409036] [drm:intel_dp_detect] [CONNECTOR:40:DP-1] [ 3539.409045] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:40:DP-1] disconnected [ 3539.409061] [drm:drm_mode_getconnector] [CONNECTOR:53:?] [ 3539.409065] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:53:DP-2] [ 3539.409068] [drm:intel_dp_detect] [CONNECTOR:53:DP-2] [ 3539.409071] [drm:intel_power_well_enable] enabling dpio-common-d [ 3539.425436] [drm:chv_dpio_cmn_power_well_enable] Enabled DPIO PHY1 (PHY_CONTROL=0x150707ff) [ 3539.435279] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064 [ 3539.437763] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064 [ 3539.445110] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064 [ 3539.453464] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064 [ 3539.459264] [drm:intel_power_well_disable] disabling dpio-common-d [ 3539.459386] wlp2s0: deauthenticating from 1c:aa:07:ec:1c:e0 by local choice (Reason: 3=DEAUTH_LEAVING) [ 3539.467132] [drm:chv_dpio_cmn_power_well_disable] Disabled DPIO PHY1 (PHY_CONTROL=0x150707fd) [ 3539.473461] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:53:DP-2] disconnected [ 3539.473508] [drm:drm_mode_getconnector] [CONNECTOR:44:?] [ 3539.473514] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:44:HDMI-A-1] [ 3539.473518] [drm:intel_hdmi_detect] [CONNECTOR:44:HDMI-A-1] [ 3539.602732] [drm:intel_hdmi_detect] HDMI live status down [ 3539.602746] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:44:HDMI-A-1] disconnected [ 3539.602788] [drm:drm_mode_getconnector] [CONNECTOR:55:?] [ 3539.602792] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:55:HDMI-A-2] [ 3539.602795] [drm:intel_hdmi_detect] [CONNECTOR:55:HDMI-A-2] [ 3539.603010] [drm:gmbus_xfer] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1) [ 3539.603014] [drm:gmbus_xfer] GMBUS [i915 gmbus panel] NAK on first message, retry [ 3539.603230] [drm:gmbus_xfer] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1) [ 3539.603235] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel [ 3539.603239] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:55:HDMI-A-2] disconnected [ 3539.608430] [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511 [ 3539.608447] [drm:vlv_update_wm] Setting FIFO watermarks - A: plane=425, cursor=63, sprite0=0, sprite1=0, SR: plane=1449, cursor=0 level=1 cxsr=1 [ 3539.610514] [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511 [ 3539.610529] [drm:vlv_update_wm] Setting FIFO watermarks - A: plane=425, cursor=0, sprite0=0, sprite1=0, SR: plane=1449, cursor=0 level=1 cxsr=1 [ 3539.855156] [drm:drm_mode_getconnector] [CONNECTOR:47:?] [ 3539.864895] [drm:connected_sink_compute_bpp] [CONNECTOR:47:eDP-1] checking for sink bpp constrains [ 3539.864902] [drm:connected_sink_compute_bpp] clamping display bpp (was 30) to EDID reported max of 18 [ 3539.864911] [drm:intel_dp_compute_config] DP link computation with max lane count 1 max bw 270000 pixel clock 75610KHz [ 3539.864916] [drm:intel_dp_compute_config] DP link bw 0a rate select 00 lane count 1 clock 270000 bpp 18 [ 3539.864918] [drm:intel_dp_compute_config] DP link bw required 136098 available 216000 [ 3539.864922] [drm:intel_modeset_pipe_config] hw max bpp: 30, pipe bpp: 18, dithering: 1 [ 3539.864927] [drm:intel_dump_pipe_config] [CRTC:26][modeset] config ffff8800724bd800 for pipe A [ 3539.864930] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 3539.864932] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1 [ 3539.864935] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 3539.864939] [drm:intel_dump_pipe_config] dp: 1, lanes: 1, gmch_m: 2642761, gmch_n: 4194304, link_m: 146820, link_n: 524288, tu: 64 [ 3539.864942] [drm:intel_dump_pipe_config] dp: 1, lanes: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 3539.864944] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 3539.864946] [drm:intel_dump_pipe_config] requested mode: [ 3539.864951] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 75610 1366 1406 1438 1574 768 771 777 800 0x0 0xa [ 3539.864953] [drm:intel_dump_pipe_config] adjusted mode: [ 3539.864957] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 75610 1366 1406 1438 1574 768 771 777 800 0x48 0xa [ 3539.864961] [drm:intel_dump_crtc_timings] crtc timings: 75610 1366 1406 1438 1574 768 771 777 800, type: 0x48 flags: 0xa [ 3539.864963] [drm:intel_dump_pipe_config] port clock: 270000 [ 3539.864966] [drm:intel_dump_pipe_config] pipe src size: 1366x768 [ 3539.864968] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0 [ 3539.864971] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 3539.864974] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 3539.864976] [drm:intel_dump_pipe_config] ips: 0 [ 3539.864978] [drm:intel_dump_pipe_config] double wide: 0 [ 3539.864981] [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0xb0002000, dpll_md: 0x0, fp0: 0x0, fp1: 0x0 [ 3539.864983] [drm:intel_dump_pipe_config] planes on this crtc [ 3539.864987] [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 0.0 idx: 0 enabled [ 3539.864990] [drm:intel_dump_pipe_config] FB:63, fb = 1366x768 format = 0x34325258 [ 3539.864994] [drm:intel_dump_pipe_config] scaler:0 src (0, 0) 1366x768 dst (0, 0) 1366x768 [ 3539.864997] [drm:intel_dump_pipe_config] CURSOR PLANE:25 plane: 0.1 idx: 1 enabled [ 3539.864999] [drm:intel_dump_pipe_config] FB:56, fb = 64x64 format = 0x34325241 [ 3539.865003] [drm:intel_dump_pipe_config] scaler:0 src (0, 0) 64x64 dst (1278, 504) 64x64 [ 3539.865007] [drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 0.1 idx: 2 disabled, scaler_id = 0 [ 3539.865011] [drm:intel_dump_pipe_config] STANDARD PLANE:28 plane: 0.2 idx: 3 disabled, scaler_id = 0 [ 3539.865041] [drm:intel_set_memory_cxsr] memory self-refresh is disabled [ 3539.870313] [drm:intel_set_memory_cxsr] memory self-refresh is disabled [ 3539.886918] [drm:intel_edp_backlight_off] [ 3540.091248] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0 [ 3540.091458] [drm:edp_panel_off] Turn eDP port C panel power off [ 3540.091470] [drm:wait_panel_off] Wait for panel power off time [ 3540.091477] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control abcd0000 [ 3540.131331] [drm:intel_get_hpd_pins] hotplug event received, stat 0x00100000, dig 0x00100000, pins 0x00000040 [ 3540.131340] [drm:intel_hpd_irq_handler] digital hpd port C - long [ 3540.131346] [drm:intel_hpd_irq_storm_detect] Received HPD interrupt on PIN 6 - cnt: 0 [ 3540.131455] [drm:wait_panel_status] Wait complete [ 3540.131484] [drm:intel_disable_pipe] disabling pipe A [ 3540.131522] [drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port C [ 3540.138025] [drm:intel_dp_link_down] [ 3540.210171] [drm:chv_phy_powergate_lanes] Power gating DPIO PHY0 CH1 lanes 0x0 (PHY_CONTROL=0x050007fd) [ 3540.221298] [drm:intel_power_well_disable] disabling dpio-common-bc [ 3540.230584] [drm:chv_dpio_cmn_power_well_disable] Disabled DPIO PHY0 (PHY_CONTROL=0x050007fc) [ 3540.239193] [drm:intel_power_well_disable] disabling display [ 3540.247533] [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511 [ 3540.247557] [drm:vlv_update_wm] Setting FIFO watermarks - A: plane=0, cursor=0, sprite0=0, sprite1=0, SR: plane=0, cursor=0 level=1 cxsr=0 [ 3540.247582] [drm:intel_connector_check_state] [CONNECTOR:47:eDP-1] [ 3540.247593] [drm:check_encoder_state] [ENCODER:39:TMDS-39] [ 3540.247602] [drm:check_encoder_state] [ENCODER:43:TMDS-43] [ 3540.247609] [drm:check_encoder_state] [ENCODER:46:TMDS-46] [ 3540.247616] [drm:check_encoder_state] [ENCODER:52:TMDS-52] [ 3540.247623] [drm:check_encoder_state] [ENCODER:54:TMDS-54] [ 3540.247630] [drm:check_crtc_state] [CRTC:26] [ 3541.138871] PM: Syncing filesystems ... done. [ 3541.183317] PM: Preparing system for sleep (mem) [ 3541.201827] Freezing user space processes ... (elapsed 0.004 seconds) done. [ 3541.206372] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 3541.207626] PM: Suspending system (mem) [ 3541.207649] Suspending console(s) (use no_console_suspend to debug) [ 3541.276764] [drm:intel_power_well_enable] enabling always-on [ 3541.276767] [drm:intel_power_well_enable] enabling display [ 3541.285467] [drm:i915_redisable_vga_power_on] Something enabled VGA plane, disabling it [ 3541.285774] [drm:intel_power_well_enable] enabling dpio-common-bc [ 3541.285797] [drm:intel_dp_detect] [CONNECTOR:47:eDP-1] [ 3541.302183] [drm:chv_dpio_cmn_power_well_enable] Enabled DPIO PHY0 (PHY_CONTROL=0x050007fd) [ 3541.310955] [drm:intel_power_well_enable] enabling dpio-common-d [ 3541.329505] [drm:chv_dpio_cmn_power_well_enable] Enabled DPIO PHY1 (PHY_CONTROL=0x050007ff) [ 3541.338147] [drm:edp_panel_vdd_on] Turning eDP port C VDD on [ 3541.338150] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 3541.338154] [drm:vlv_power_sequencer_pipe] picked pipe A power sequencer for port C [ 3541.338165] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x87d00001, PP_OFF 0x1f40001, PP_DIV 0x270f06 [ 3541.338170] [drm:vlv_power_sequencer_kick] kicking pipe A power sequencer for port C [ 3541.338178] [drm:chv_phy_powergate_ch] Power gating DPIO PHY0 CH0 (DPIO_PHY_CONTROL=0x0d0007ff) [ 3541.389755] [drm:chv_phy_powergate_ch] Power gating DPIO PHY0 CH0 (DPIO_PHY_CONTROL=0x050007ff) [ 3541.399055] [drm:wait_panel_status] mask b800000f value 00000000 status 08000001 control 00000000 [ 3541.777853] [drm:wait_panel_status] Wait complete [ 3541.777864] [drm:edp_panel_vdd_on] PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0008 [ 3541.777868] [drm:edp_panel_vdd_on] eDP port C panel power wasn't enabled [ 3541.860572] [drm:intel_get_hpd_pins] hotplug event received, stat 0x00100000, dig 0x00100000, pins 0x00000040 [ 3541.860583] [drm:intel_hpd_irq_handler] digital hpd port C - long [ 3541.860593] [drm:intel_hpd_irq_storm_detect] Received HPD interrupt on PIN 6 - cnt: 0 [ 3541.860962] [drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port C [ 3541.980824] [drm:drm_helper_hpd_irq_event] [CONNECTOR:47:eDP-1] status updated from connected to connected [ 3541.980835] [drm:intel_dp_detect] [CONNECTOR:40:DP-1] [ 3541.980849] [drm:drm_helper_hpd_irq_event] [CONNECTOR:40:DP-1] status updated from disconnected to disconnected [ 3541.980858] [drm:intel_hdmi_detect] [CONNECTOR:44:HDMI-A-1] [ 3542.108084] [drm:intel_hdmi_detect] HDMI live status down [ 3542.108094] [drm:drm_helper_hpd_irq_event] [CONNECTOR:44:HDMI-A-1] status updated from disconnected to disconnected [ 3542.108097] [drm:intel_dp_detect] [CONNECTOR:53:DP-2] [ 3542.110601] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064 [ 3542.113087] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064 [ 3542.122402] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064 [ 3542.130354] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064 [ 3542.135847] [drm:drm_helper_hpd_irq_event] [CONNECTOR:53:DP-2] status updated from disconnected to disconnected [ 3542.135850] [drm:intel_hdmi_detect] [CONNECTOR:55:HDMI-A-2] [ 3542.136058] [drm:gmbus_xfer] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1) [ 3542.136060] [drm:gmbus_xfer] GMBUS [i915 gmbus panel] NAK on first message, retry [ 3542.136563] [drm:gmbus_xfer] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1) [ 3542.136577] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel [ 3542.136594] [drm:drm_helper_hpd_irq_event] [CONNECTOR:55:HDMI-A-2] status updated from disconnected to disconnected [ 3542.136696] [drm:edp_panel_vdd_off_sync] Turning eDP port C VDD off [ 3542.136705] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0000 [ 3542.192981] [drm:intel_power_well_disable] disabling dpio-common-d [ 3542.202401] [drm:chv_dpio_cmn_power_well_disable] Disabled DPIO PHY1 (PHY_CONTROL=0x050007fd) [ 3542.211555] [drm:intel_power_well_disable] disabling dpio-common-bc [ 3542.220924] [drm:chv_dpio_cmn_power_well_disable] Disabled DPIO PHY0 (PHY_CONTROL=0x050007fc) [ 3542.230228] [drm:intel_power_well_disable] disabling display [ 3542.239545] [drm:intel_power_well_disable] disabling always-on [ 3542.240017] PM: suspend of devices complete after 1031.550 msecs [ 3542.260471] PM: late suspend of devices complete after 20.422 msecs [ 3542.262673] r8169 0000:01:00.0: System wakeup enabled by ACPI [ 3542.263062] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [ 3542.276949] PM: noirq suspend of devices complete after 16.461 msecs [ 3542.277009] ACPI: Preparing to enter system sleep state S3 [ 3542.329194] ACPI : EC: EC stopped [ 3542.329195] PM: Saving platform NVS memory [ 3542.329293] Disabling non-boot CPUs ... [ 3542.329792] Broke affinity for irq 1 [ 3542.329825] Broke affinity for irq 34 [ 3542.329836] Broke affinity for irq 37 [ 3542.329886] Broke affinity for irq 115 [ 3542.329944] Cannot set affinity for irq 185 [ 3542.330050] Broke affinity for irq 311 [ 3542.330072] Broke affinity for irq 315 [ 3542.331231] smpboot: CPU 1 is now offline [ 3542.341237] ACPI: Low-level resume complete [ 3542.341322] ACPI : EC: EC started [ 3542.341323] PM: Restoring platform NVS memory [ 3542.342159] Enabling non-boot CPUs ... [ 3542.361696] x86: Booting SMP configuration: [ 3542.361698] smpboot: Booting Node 0 Processor 1 APIC 0x4 [ 3542.369715] cache: parent cpu1 should not be sleeping [ 3542.370059] CPU1 is up [ 3542.370868] ACPI: Waking up from system sleep state S3 [ 3542.490136] intel-vbtn INT33D6:00: unknown event index 0xcd [ 3542.702923] acpi LNXPOWER:03: Turning OFF [ 3542.703048] acpi LNXPOWER:02: Turning OFF [ 3542.705687] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [ 3542.718540] PM: noirq resume of devices complete after 15.335 msecs [ 3542.728977] [drm:chv_phy_control_init] Initial PHY_CONTROL=0x050007fc [ 3542.728983] [drm:intel_power_well_enable] enabling always-on [ 3542.728985] [drm:intel_power_well_enable] enabling display [ 3542.731012] [drm:intel_power_well_enable] enabling dpio-common-bc [ 3542.747159] [drm:chv_dpio_cmn_power_well_enable] Enabled DPIO PHY0 (PHY_CONTROL=0x050007fd) [ 3542.755235] [drm:intel_power_well_enable] enabling dpio-common-d [ 3542.771372] [drm:chv_dpio_cmn_power_well_enable] Enabled DPIO PHY1 (PHY_CONTROL=0x050007ff) [ 3543.733285] PM: early resume of devices complete after 1014.145 msecs [ 3543.802384] r8169 0000:01:00.0: System wakeup disabled by ACPI [ 3543.804715] rtc_cmos 00:04: System wakeup disabled by ACPI [ 3543.807102] [drm:i915_redisable_vga_power_on] Something enabled VGA plane, disabling it [ 3543.807440] [drm:intel_opregion_setup] graphic opregion physical addr: 0x76677000 [ 3543.807554] [drm:intel_opregion_setup] Public ACPI methods supported [ 3543.807558] [drm:intel_opregion_setup] ASLE supported [ 3543.807582] [drm:vlv_initial_power_sequencer_setup] no initial power sequencer for port C [ 3543.807668] [drm:gen8_init_common_ring] Execlists enabled for render ring [ 3543.807684] [drm:gen8_init_common_ring] Execlists enabled for bsd ring [ 3543.807695] [drm:gen8_init_common_ring] Execlists enabled for blitter ring [ 3543.807706] [drm:gen8_init_common_ring] Execlists enabled for video enhancement ring [ 3543.810138] [drm:intel_update_cdclk] Current CD clock rate: 266667 kHz [ 3543.810212] [drm:intel_modeset_readout_hw_state] [CRTC:26] hw state readout: disabled [ 3543.810217] [drm:intel_modeset_readout_hw_state] [CRTC:31] hw state readout: disabled [ 3543.810223] [drm:intel_modeset_readout_hw_state] [CRTC:36] hw state readout: disabled [ 3543.810233] [drm:intel_modeset_readout_hw_state] [ENCODER:39:TMDS-39] hw state readout: disabled, pipe A [ 3543.810239] [drm:intel_modeset_readout_hw_state] [ENCODER:43:TMDS-43] hw state readout: disabled, pipe A [ 3543.810243] [drm:intel_modeset_readout_hw_state] [ENCODER:46:TMDS-46] hw state readout: disabled, pipe A [ 3543.810246] [drm:intel_modeset_readout_hw_state] [ENCODER:52:TMDS-52] hw state readout: disabled, pipe A [ 3543.810249] [drm:intel_modeset_readout_hw_state] [ENCODER:54:TMDS-54] hw state readout: disabled, pipe A [ 3543.810252] [drm:intel_modeset_readout_hw_state] [CONNECTOR:47:eDP-1] hw state readout: disabled [ 3543.810256] [drm:intel_modeset_readout_hw_state] [CONNECTOR:40:DP-1] hw state readout: disabled [ 3543.810271] [drm:intel_modeset_readout_hw_state] [CONNECTOR:44:HDMI-A-1] hw state readout: disabled [ 3543.810274] [drm:intel_modeset_readout_hw_state] [CONNECTOR:53:DP-2] hw state readout: disabled [ 3543.810277] [drm:intel_modeset_readout_hw_state] [CONNECTOR:55:HDMI-A-2] hw state readout: disabled [ 3543.810285] [drm:intel_dump_pipe_config] [CRTC:26][setup_hw_state] config ffff88004bb42400 for pipe A [ 3543.810286] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 3543.810296] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 3543.810299] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 3543.810302] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 3543.810304] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 3543.810306] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 3543.810307] [drm:intel_dump_pipe_config] requested mode: [ 3543.810312] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 3543.810313] [drm:intel_dump_pipe_config] adjusted mode: [ 3543.810316] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 3543.810320] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 3543.810322] [drm:intel_dump_pipe_config] port clock: 0 [ 3543.810323] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 3543.810325] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0 [ 3543.810328] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 3543.810334] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 3543.810336] [drm:intel_dump_pipe_config] ips: 0 [ 3543.810337] [drm:intel_dump_pipe_config] double wide: 0 [ 3543.810339] [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0x0, dpll_md: 0x0, fp0: 0x0, fp1: 0x0 [ 3543.810340] [drm:intel_dump_pipe_config] planes on this crtc [ 3543.810355] [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 0.0 idx: 0 enabled [ 3543.810357] [drm:intel_dump_pipe_config] FB:63, fb = 1366x768 format = 0x34325258 [ 3543.810357] [drm:intel_dump_pipe_config] scaler:0 src (0, 0) 0x0 dst (0, 0) 0x0 [ 3543.810362] [drm:intel_dump_pipe_config] CURSOR PLANE:25 plane: 0.1 idx: 1 enabled [ 3543.810365] [drm:intel_dump_pipe_config] FB:56, fb = 64x64 format = 0x34325241 [ 3543.810365] [drm:intel_dump_pipe_config] scaler:0 src (0, 0) 4294966018x4294966792 dst (1278, 504) 4294966018x4294966792 [ 3543.810367] [drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 0.1 idx: 2 disabled, scaler_id = 0 [ 3543.810369] [drm:intel_dump_pipe_config] STANDARD PLANE:28 plane: 0.2 idx: 3 disabled, scaler_id = 0 [ 3543.810372] [drm:intel_dump_pipe_config] [CRTC:31][setup_hw_state] config ffff8800724bcc00 for pipe B [ 3543.810373] [drm:intel_dump_pipe_config] cpu_transcoder: B [ 3543.810374] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 3543.810376] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 3543.810378] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 3543.810380] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 3543.810381] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 3543.810382] [drm:intel_dump_pipe_config] requested mode: [ 3543.810384] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 3543.810385] [drm:intel_dump_pipe_config] adjusted mode: [ 3543.810388] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 3543.810390] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 3543.810395] [drm:intel_dump_pipe_config] port clock: 0 [ 3543.810396] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 3543.810398] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0 [ 3543.810399] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 3543.810401] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 3543.810402] [drm:intel_dump_pipe_config] ips: 0 [ 3543.810402] [drm:intel_dump_pipe_config] double wide: 0 [ 3543.810404] [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0x0, dpll_md: 0x0, fp0: 0x0, fp1: 0x0 [ 3543.810405] [drm:intel_dump_pipe_config] planes on this crtc [ 3543.810407] [drm:intel_dump_pipe_config] STANDARD PLANE:29 plane: 1.0 idx: 4 disabled, scaler_id = 0 [ 3543.810409] [drm:intel_dump_pipe_config] CURSOR PLANE:30 plane: 1.2 idx: 5 disabled, scaler_id = 0 [ 3543.810410] [drm:intel_dump_pipe_config] STANDARD PLANE:32 plane: 1.1 idx: 6 disabled, scaler_id = 0 [ 3543.810412] [drm:intel_dump_pipe_config] STANDARD PLANE:33 plane: 1.2 idx: 7 disabled, scaler_id = 0 [ 3543.810419] [drm:intel_dump_pipe_config] [CRTC:36][setup_hw_state] config ffff8800724be800 for pipe C [ 3543.810420] [drm:intel_dump_pipe_config] cpu_transcoder: C [ 3543.810421] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 3543.810423] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 3543.810425] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 3543.810427] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 3543.810428] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 3543.810429] [drm:intel_dump_pipe_config] requested mode: [ 3543.810431] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 3543.810432] [drm:intel_dump_pipe_config] adjusted mode: [ 3543.810435] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 3543.810437] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 3543.810438] [drm:intel_dump_pipe_config] port clock: 0 [ 3543.810439] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 3543.810441] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0 [ 3543.810442] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 3543.810443] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 3543.810444] [drm:intel_dump_pipe_config] ips: 0 [ 3543.810445] [drm:intel_dump_pipe_config] double wide: 0 [ 3543.810447] [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0x0, dpll_md: 0x0, fp0: 0x0, fp1: 0x0 [ 3543.810448] [drm:intel_dump_pipe_config] planes on this crtc [ 3543.810450] [drm:intel_dump_pipe_config] STANDARD PLANE:34 plane: 2.0 idx: 8 disabled, scaler_id = 0 [ 3543.810452] [drm:intel_dump_pipe_config] CURSOR PLANE:35 plane: 2.3 idx: 9 disabled, scaler_id = 0 [ 3543.810453] [drm:intel_dump_pipe_config] STANDARD PLANE:37 plane: 2.1 idx: 10 disabled, scaler_id = 0 [ 3543.810455] [drm:intel_dump_pipe_config] STANDARD PLANE:38 plane: 2.2 idx: 11 disabled, scaler_id = 0 [ 3543.810465] [drm:vlv_get_fifo_size] Pipe A primary A FIFO size: 256 [ 3543.810469] [drm:vlv_get_fifo_size] Pipe A sprite A FIFO size: 128 [ 3543.810472] [drm:vlv_get_fifo_size] Pipe A sprite B FIFO size: 127 [ 3543.810475] [drm:vlv_get_fifo_size] Pipe B primary B FIFO size: 256 [ 3543.810478] [drm:vlv_get_fifo_size] Pipe B sprite C FIFO size: 128 [ 3543.810481] [drm:vlv_get_fifo_size] Pipe B sprite D FIFO size: 127 [ 3543.810485] [drm:vlv_get_fifo_size] Pipe C primary C FIFO size: 256 [ 3543.810488] [drm:vlv_get_fifo_size] Pipe C sprite E FIFO size: 128 [ 3543.810491] [drm:vlv_get_fifo_size] Pipe C sprite F FIFO size: 127 [ 3543.816987] r8169 0000:01:00.0 enp1s0: link down [ 3543.849448] [drm:vlv_wm_get_hw_state] Punit not acking DDR DVFS request, assuming DDR DVFS is disabled [ 3543.849453] [drm:vlv_wm_get_hw_state] Initial watermarks: pipe A, plane=15, cursor=15, sprite0=15, sprite1=15 [ 3543.849456] [drm:vlv_wm_get_hw_state] Initial watermarks: pipe B, plane=15, cursor=15, sprite0=15, sprite1=15 [ 3543.849458] [drm:vlv_wm_get_hw_state] Initial watermarks: pipe C, plane=15, cursor=15, sprite0=15, sprite1=15 [ 3543.849460] [drm:vlv_wm_get_hw_state] Initial watermarks: SR plane=127, SR cursor=0 level=0 cxsr=0 [ 3543.849466] [drm:intel_power_well_disable] disabling dpio-common-d [ 3543.853501] xhci_hcd 0000:00:14.0: port 4 resume PLC timeout [ 3543.858427] [drm:chv_dpio_cmn_power_well_disable] Disabled DPIO PHY1 (PHY_CONTROL=0x050007fd) [ 3543.864560] [drm:intel_power_well_disable] disabling dpio-common-bc [ 3543.872504] [drm:chv_dpio_cmn_power_well_disable] Disabled DPIO PHY0 (PHY_CONTROL=0x050007fc) [ 3543.876622] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout [ 3543.880586] [drm:intel_power_well_disable] disabling always-on [ 3543.880619] [drm:connected_sink_compute_bpp] [CONNECTOR:47:eDP-1] checking for sink bpp constrains [ 3543.880621] [drm:connected_sink_compute_bpp] clamping display bpp (was 30) to EDID reported max of 18 [ 3543.880628] [drm:intel_dp_compute_config] DP link computation with max lane count 1 max bw 270000 pixel clock 75610KHz [ 3543.880632] [drm:intel_dp_compute_config] DP link bw 0a rate select 00 lane count 1 clock 270000 bpp 18 [ 3543.880635] [drm:intel_dp_compute_config] DP link bw required 136098 available 216000 [ 3543.880639] [drm:intel_modeset_pipe_config] hw max bpp: 30, pipe bpp: 18, dithering: 1 [ 3543.880643] [drm:intel_dump_pipe_config] [CRTC:26][modeset] config ffff88006cab9800 for pipe A [ 3543.880644] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 3543.880646] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1 [ 3543.880649] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 3543.880652] [drm:intel_dump_pipe_config] dp: 1, lanes: 1, gmch_m: 2642761, gmch_n: 4194304, link_m: 146820, link_n: 524288, tu: 64 [ 3543.880654] [drm:intel_dump_pipe_config] dp: 1, lanes: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 3543.880656] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 3543.880657] [drm:intel_dump_pipe_config] requested mode: [ 3543.880663] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 75610 1366 1406 1438 1574 768 771 777 800 0x0 0xa [ 3543.880664] [drm:intel_dump_pipe_config] adjusted mode: [ 3543.880668] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 75610 1366 1406 1438 1574 768 771 777 800 0x48 0xa [ 3543.880672] [drm:intel_dump_crtc_timings] crtc timings: 75610 1366 1406 1438 1574 768 771 777 800, type: 0x48 flags: 0xa [ 3543.880674] [drm:intel_dump_pipe_config] port clock: 270000 [ 3543.880675] [drm:intel_dump_pipe_config] pipe src size: 1366x768 [ 3543.880677] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0 [ 3543.880679] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 3543.880681] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 3543.880682] [drm:intel_dump_pipe_config] ips: 0 [ 3543.880684] [drm:intel_dump_pipe_config] double wide: 0 [ 3543.880686] [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0xb0002000, dpll_md: 0x0, fp0: 0x0, fp1: 0x0 [ 3543.880687] [drm:intel_dump_pipe_config] planes on this crtc [ 3543.880697] [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 0.0 idx: 0 enabled [ 3543.880700] [drm:intel_dump_pipe_config] FB:63, fb = 1366x768 format = 0x34325258 [ 3543.880700] [drm:intel_dump_pipe_config] scaler:0 src (0, 0) 0x0 dst (0, 0) 0x0 [ 3543.880706] [drm:intel_dump_pipe_config] CURSOR PLANE:25 plane: 0.1 idx: 1 enabled [ 3543.880711] [drm:intel_dump_pipe_config] FB:56, fb = 64x64 format = 0x34325241 [ 3543.880711] [drm:intel_dump_pipe_config] scaler:0 src (0, 0) 4294966018x4294966792 dst (1278, 504) 4294966018x4294966792 [ 3543.880714] [drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 0.1 idx: 2 disabled, scaler_id = 0 [ 3543.880718] [drm:intel_dump_pipe_config] STANDARD PLANE:28 plane: 0.2 idx: 3 disabled, scaler_id = 0 [ 3543.880757] [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511 [ 3543.880768] [drm:vlv_update_wm] Setting FIFO watermarks - A: plane=0, cursor=0, sprite0=0, sprite1=0, SR: plane=0, cursor=0 level=1 cxsr=0 [ 3543.885081] [drm:vlv_pipe_set_fifo_size] Pipe B FIFO split 511 / 511 / 511 [ 3543.885091] [drm:vlv_pipe_set_fifo_size] Pipe C FIFO split 511 / 511 / 511 [ 3543.885107] [drm:intel_connector_check_state] [CONNECTOR:47:eDP-1] [ 3543.885112] [drm:intel_connector_check_state] [CONNECTOR:40:DP-1] [ 3543.885114] [drm:intel_connector_check_state] [CONNECTOR:44:HDMI-A-1] [ 3543.885117] [drm:intel_connector_check_state] [CONNECTOR:53:DP-2] [ 3543.885120] [drm:intel_connector_check_state] [CONNECTOR:55:HDMI-A-2] [ 3543.885122] [drm:check_encoder_state] [ENCODER:39:TMDS-39] [ 3543.885124] [drm:check_encoder_state] [ENCODER:43:TMDS-43] [ 3543.885126] [drm:check_encoder_state] [ENCODER:46:TMDS-46] [ 3543.885128] [drm:check_encoder_state] [ENCODER:52:TMDS-52] [ 3543.885130] [drm:check_encoder_state] [ENCODER:54:TMDS-54] [ 3543.885132] [drm:check_crtc_state] [CRTC:26] [ 3543.885136] [drm:check_crtc_state] [CRTC:31] [ 3543.885140] [drm:check_crtc_state] [CRTC:36] [ 3543.885819] [drm:intel_didl_outputs] 10 outputs detected [ 3543.885870] [drm:intel_dp_detect] [CONNECTOR:47:eDP-1] [ 3543.885875] [drm:intel_power_well_enable] enabling dpio-common-bc [ 3543.903099] [drm:chv_dpio_cmn_power_well_enable] Enabled DPIO PHY0 (PHY_CONTROL=0x050007fd) [ 3543.912283] [drm:edp_panel_vdd_on] Turning eDP port C VDD on [ 3543.912285] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 3543.912289] [drm:vlv_power_sequencer_pipe] picked pipe A power sequencer for port C [ 3543.912298] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x87d00001, PP_OFF 0x1f40001, PP_DIV 0x270f06 [ 3543.912302] [drm:vlv_power_sequencer_kick] kicking pipe A power sequencer for port C [ 3543.912310] [drm:chv_phy_powergate_ch] Power gating DPIO PHY0 CH0 (DPIO_PHY_CONTROL=0x0d0007fd) [ 3543.960215] [drm:chv_phy_powergate_ch] Power gating DPIO PHY0 CH0 (DPIO_PHY_CONTROL=0x050007fd) [ 3543.969465] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control 00000000 [ 3543.969469] [drm:wait_panel_status] Wait complete [ 3543.969476] [drm:edp_panel_vdd_on] PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0008 [ 3543.969480] [drm:edp_panel_vdd_on] eDP port C panel power wasn't enabled [ 3544.051866] [drm:intel_get_hpd_pins] hotplug event received, stat 0x00100000, dig 0x00100000, pins 0x00000040 [ 3544.051870] [drm:intel_hpd_irq_handler] digital hpd port C - long [ 3544.051873] [drm:intel_hpd_irq_storm_detect] Received HPD interrupt on PIN 6 - cnt: 0 [ 3544.051918] [drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port C [ 3544.102342] usb 1-5: reset full-speed USB device number 4 using xhci_hcd [ 3544.171156] [drm:drm_helper_hpd_irq_event] [CONNECTOR:47:eDP-1] status updated from connected to connected [ 3544.171160] [drm:intel_dp_detect] [CONNECTOR:40:DP-1] [ 3544.171166] [drm:drm_helper_hpd_irq_event] [CONNECTOR:40:DP-1] status updated from disconnected to disconnected [ 3544.171169] [drm:intel_hdmi_detect] [CONNECTOR:44:HDMI-A-1] [ 3544.298507] [drm:intel_hdmi_detect] HDMI live status down [ 3544.298519] [drm:drm_helper_hpd_irq_event] [CONNECTOR:44:HDMI-A-1] status updated from disconnected to disconnected [ 3544.298523] [drm:intel_dp_detect] [CONNECTOR:53:DP-2] [ 3544.298527] [drm:intel_power_well_enable] enabling dpio-common-d [ 3544.317067] [drm:chv_dpio_cmn_power_well_enable] Enabled DPIO PHY1 (PHY_CONTROL=0x050007ff) [ 3544.328856] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064 [ 3544.331351] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064 [ 3544.340769] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064 [ 3544.342949] usb 1-3: reset high-speed USB device number 2 using xhci_hcd [ 3544.348862] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064 [ 3544.354279] [drm:intel_power_well_disable] disabling dpio-common-d [ 3544.363433] [drm:chv_dpio_cmn_power_well_disable] Disabled DPIO PHY1 (PHY_CONTROL=0x050007fd) [ 3544.372717] [drm:drm_helper_hpd_irq_event] [CONNECTOR:53:DP-2] status updated from disconnected to disconnected [ 3544.372736] [drm:intel_hdmi_detect] [CONNECTOR:55:HDMI-A-2] [ 3544.373606] [drm:gmbus_xfer] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1) [ 3544.373613] [drm:gmbus_xfer] GMBUS [i915 gmbus panel] NAK on first message, retry [ 3544.374042] [drm:gmbus_xfer] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1) [ 3544.374049] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel [ 3544.374054] [drm:drm_helper_hpd_irq_event] [CONNECTOR:55:HDMI-A-2] status updated from disconnected to disconnected [ 3544.695194] usb 1-4: reset full-speed USB device number 3 using xhci_hcd [ 3544.880142] usb 1-4: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes [ 3544.902054] PM: resume of devices complete after 1168.251 msecs [ 3544.904319] PM: Finishing wakeup. [ 3544.904326] Restarting tasks ... done. [ 3544.933013] Bluetooth: hci0: read Intel version: 370810011003110e00 [ 3544.933026] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq [ 3544.934863] [drm:drm_mode_setcrtc] [CRTC:26] [ 3544.934880] [drm:drm_mode_setcrtc] [CONNECTOR:47:eDP-1] [ 3544.934899] [drm:connected_sink_compute_bpp] [CONNECTOR:47:eDP-1] checking for sink bpp constrains [ 3544.934903] [drm:connected_sink_compute_bpp] clamping display bpp (was 30) to EDID reported max of 18 [ 3544.934910] [drm:intel_dp_compute_config] DP link computation with max lane count 1 max bw 270000 pixel clock 75610KHz [ 3544.934915] [drm:intel_dp_compute_config] DP link bw 0a rate select 00 lane count 1 clock 270000 bpp 18 [ 3544.934918] [drm:intel_dp_compute_config] DP link bw required 136098 available 216000 [ 3544.934921] [drm:intel_modeset_pipe_config] hw max bpp: 30, pipe bpp: 18, dithering: 1 [ 3544.934926] [drm:intel_dump_pipe_config] [CRTC:26][modeset] config ffff880050c43c00 for pipe A [ 3544.934929] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 3544.934931] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1 [ 3544.934934] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 3544.934938] [drm:intel_dump_pipe_config] dp: 1, lanes: 1, gmch_m: 2642761, gmch_n: 4194304, link_m: 146820, link_n: 524288, tu: 64 [ 3544.934941] [drm:intel_dump_pipe_config] dp: 1, lanes: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 3544.934944] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 3544.934979] [drm:intel_dump_pipe_config] requested mode: [ 3544.934985] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 75610 1366 1406 1438 1574 768 771 777 800 0x0 0xa [ 3544.934987] [drm:intel_dump_pipe_config] adjusted mode: [ 3544.934991] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 75610 1366 1406 1438 1574 768 771 777 800 0x48 0xa [ 3544.934995] [drm:intel_dump_crtc_timings] crtc timings: 75610 1366 1406 1438 1574 768 771 777 800, type: 0x48 flags: 0xa [ 3544.934998] [drm:intel_dump_pipe_config] port clock: 270000 [ 3544.935000] [drm:intel_dump_pipe_config] pipe src size: 1366x768 [ 3544.935003] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0 [ 3544.935005] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 3544.935008] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 3544.935011] [drm:intel_dump_pipe_config] ips: 0 [ 3544.935013] [drm:intel_dump_pipe_config] double wide: 0 [ 3544.935016] [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0xb0002000, dpll_md: 0x0, fp0: 0x0, fp1: 0x0 [ 3544.935018] [drm:intel_dump_pipe_config] planes on this crtc [ 3544.935022] [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 0.0 idx: 0 enabled [ 3544.935025] [drm:intel_dump_pipe_config] FB:63, fb = 1366x768 format = 0x34325258 [ 3544.935029] [drm:intel_dump_pipe_config] scaler:0 src (0, 0) 0x0 dst (0, 0) 0x0 [ 3544.935032] [drm:intel_dump_pipe_config] CURSOR PLANE:25 plane: 0.1 idx: 1 disabled, scaler_id = 0 [ 3544.935035] [drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 0.1 idx: 2 disabled, scaler_id = 0 [ 3544.935039] [drm:intel_dump_pipe_config] STANDARD PLANE:28 plane: 0.2 idx: 3 disabled, scaler_id = 0 [ 3544.935064] [drm:intel_set_memory_cxsr] memory self-refresh is disabled [ 3544.935083] [drm:chv_phy_powergate_lanes] Power gating DPIO PHY0 CH1 lanes 0xe (PHY_CONTROL=0x150707fd) [ 3545.028393] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 3545.033190] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled [ 3545.033387] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled [ 3545.034529] [drm:edp_panel_on] Turn eDP port C panel power on [ 3545.034535] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 3545.034540] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0008 [ 3545.034543] [drm:wait_panel_status] Wait complete [ 3545.034546] [drm:wait_panel_on] Wait for panel power on [ 3545.034551] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd000b [ 3545.112407] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled [ 3545.112625] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled [ 3545.127611] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 3545.138046] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready [ 3545.153306] r8169 0000:01:00.0 enp1s0: link down [ 3545.153402] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready [ 3545.194601] [drm:wait_panel_status] Wait complete [ 3545.194612] [drm:edp_panel_vdd_off_sync] Turning eDP port C VDD off [ 3545.194622] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0003 [ 3545.194637] [drm:edp_panel_vdd_on] Turning eDP port C VDD on [ 3545.194644] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b [ 3545.218745] [drm:intel_dp_set_signal_levels] Using vswing level 0 [ 3545.218749] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0 [ 3545.219362] [drm:intel_dp_link_training_clock_recovery] clock recovery OK [ 3545.220286] [drm:intel_dp_link_training_channel_equalization] Channel EQ done. DP Training successful [ 3545.220493] [drm:intel_enable_pipe] enabling pipe A [ 3545.220510] [drm:intel_edp_backlight_on] [ 3545.220513] [drm:intel_panel_enable_backlight] pipe A [ 3545.220518] [drm:intel_panel_actually_set_backlight] set backlight PWM = 1562 [ 3545.220527] [drm:intel_psr_enable] PSR not supported by this panel [ 3545.220539] [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511 [ 3545.220548] [drm:vlv_update_wm] Setting FIFO watermarks - A: plane=425, cursor=63, sprite0=0, sprite1=0, SR: plane=0, cursor=0 level=1 cxsr=0 [ 3545.237212] [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511 [ 3545.237222] [drm:vlv_update_wm] Setting FIFO watermarks - A: plane=425, cursor=63, sprite0=0, sprite1=0, SR: plane=1449, cursor=0 level=1 cxsr=1 [ 3545.237227] [drm:intel_set_memory_cxsr] memory self-refresh is enabled [ 3545.240142] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated [ 3545.253880] [drm:intel_connector_check_state] [CONNECTOR:47:eDP-1] [ 3545.253889] [drm:check_encoder_state] [ENCODER:39:TMDS-39] [ 3545.253895] [drm:check_encoder_state] [ENCODER:43:TMDS-43] [ 3545.253899] [drm:check_encoder_state] [ENCODER:46:TMDS-46] [ 3545.253901] [drm:check_encoder_state] [ENCODER:52:TMDS-52] [ 3545.253904] [drm:check_encoder_state] [ENCODER:54:TMDS-54] [ 3545.253909] [drm:check_crtc_state] [CRTC:26] [ 3545.264090] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=1562/1562 [ 3545.264094] [drm:intel_panel_actually_set_backlight] set backlight PWM = 1562 [ 3545.264293] [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511 [ 3545.264304] [drm:vlv_update_wm] Setting FIFO watermarks - A: plane=425, cursor=0, sprite0=0, sprite1=0, SR: plane=1449, cursor=0 level=1 cxsr=1 [ 3545.268629] [drm:drm_mode_getconnector] [CONNECTOR:47:?] [ 3545.274023] [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511 [ 3545.274036] [drm:vlv_update_wm] Setting FIFO watermarks - A: plane=425, cursor=63, sprite0=0, sprite1=0, SR: plane=1449, cursor=0 level=1 cxsr=1 [ 3545.274728] [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511 [ 3545.274739] [drm:vlv_update_wm] Setting FIFO watermarks - A: plane=425, cursor=0, sprite0=0, sprite1=0, SR: plane=1449, cursor=0 level=1 cxsr=1 [ 3545.338672] [drm:cherryview_enable_rps] GT fifo had a previous error 1080000 [ 3545.342950] [drm:cherryview_enable_rps] GPLL enabled? yes [ 3545.342955] [drm:cherryview_enable_rps] GPU status: 0x00002010 [ 3545.342958] [drm:cherryview_enable_rps] current GPU freq: 320 MHz (32) [ 3545.342961] [drm:cherryview_enable_rps] setting GPU freq to 320 MHz (32) [ 3545.416727] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 3548.228412] [drm:edp_panel_vdd_off_sync] Turning eDP port C VDD off [ 3548.228447] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007 [ 3548.726739] wlp2s0: authenticate with 1c:aa:07:ec:1c:e0 [ 3548.729186] wlp2s0: send auth to 1c:aa:07:ec:1c:e0 (try 1/3) [ 3548.731129] wlp2s0: authenticated [ 3548.732393] iwlwifi 0000:02:00.0 wlp2s0: disabling HT as WMM/QoS is not supported by the AP [ 3548.732399] iwlwifi 0000:02:00.0 wlp2s0: disabling VHT as WMM/QoS is not supported by the AP [ 3548.736164] wlp2s0: associate with 1c:aa:07:ec:1c:e0 (try 1/3) [ 3548.738886] wlp2s0: RX AssocResp from 1c:aa:07:ec:1c:e0 (capab=0x411 status=0 aid=2) [ 3548.742380] wlp2s0: associated [ 3548.742460] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready [ 5274.524817] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 5274.528176] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 5274.528830] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 5274.541336] [drm:connected_sink_compute_bpp] [CONNECTOR:47:eDP-1] checking for sink bpp constrains [ 5274.541344] [drm:connected_sink_compute_bpp] clamping display bpp (was 30) to EDID reported max of 18 [ 5274.541352] [drm:intel_dp_compute_config] DP link computation with max lane count 1 max bw 270000 pixel clock 75610KHz [ 5274.541357] [drm:intel_dp_compute_config] DP link bw 0a rate select 00 lane count 1 clock 270000 bpp 18 [ 5274.541360] [drm:intel_dp_compute_config] DP link bw required 136098 available 216000 [ 5274.541364] [drm:intel_modeset_pipe_config] hw max bpp: 30, pipe bpp: 18, dithering: 1 [ 5274.541369] [drm:intel_dump_pipe_config] [CRTC:26][modeset] config ffff880054ffd000 for pipe A [ 5274.541372] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 5274.541374] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1 [ 5274.541378] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 5274.541381] [drm:intel_dump_pipe_config] dp: 1, lanes: 1, gmch_m: 2642761, gmch_n: 4194304, link_m: 146820, link_n: 524288, tu: 64 [ 5274.541385] [drm:intel_dump_pipe_config] dp: 1, lanes: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 5274.541387] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 5274.541390] [drm:intel_dump_pipe_config] requested mode: [ 5274.541395] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 75610 1366 1406 1438 1574 768 771 777 800 0x0 0xa [ 5274.541397] [drm:intel_dump_pipe_config] adjusted mode: [ 5274.541402] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 75610 1366 1406 1438 1574 768 771 777 800 0x48 0xa [ 5274.541406] [drm:intel_dump_crtc_timings] crtc timings: 75610 1366 1406 1438 1574 768 771 777 800, type: 0x48 flags: 0xa [ 5274.541408] [drm:intel_dump_pipe_config] port clock: 270000 [ 5274.541411] [drm:intel_dump_pipe_config] pipe src size: 1366x768 [ 5274.541413] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0 [ 5274.541416] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 5274.541419] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 5274.541422] [drm:intel_dump_pipe_config] ips: 0 [ 5274.541424] [drm:intel_dump_pipe_config] double wide: 0 [ 5274.541427] [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0xb0002000, dpll_md: 0x0, fp0: 0x0, fp1: 0x0 [ 5274.541430] [drm:intel_dump_pipe_config] planes on this crtc [ 5274.541433] [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 0.0 idx: 0 enabled [ 5274.541437] [drm:intel_dump_pipe_config] FB:65, fb = 1366x768 format = 0x34325258 [ 5274.541440] [drm:intel_dump_pipe_config] scaler:0 src (0, 0) 1366x768 dst (0, 0) 1366x768 [ 5274.541444] [drm:intel_dump_pipe_config] CURSOR PLANE:25 plane: 0.1 idx: 1 enabled [ 5274.541446] [drm:intel_dump_pipe_config] FB:56, fb = 64x64 format = 0x34325241 [ 5274.541450] [drm:intel_dump_pipe_config] scaler:0 src (0, 0) 64x64 dst (509, 319) 64x64 [ 5274.541454] [drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 0.1 idx: 2 disabled, scaler_id = 0 [ 5274.541458] [drm:intel_dump_pipe_config] STANDARD PLANE:28 plane: 0.2 idx: 3 disabled, scaler_id = 0 [ 5274.541488] [drm:intel_set_memory_cxsr] memory self-refresh is disabled [ 5274.543452] intel-vbtn INT33D6:00: unknown event index 0xcd [ 5274.545677] [drm:intel_set_memory_cxsr] memory self-refresh is disabled [ 5274.554946] acpi device:17: Cannot transition to power state D3hot for parent in (unknown) [ 5274.555121] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 5274.555183] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 5274.555410] pci_bus 0000:01: Allocating resources [ 5274.555446] pci_bus 0000:02: Allocating resources [ 5274.555488] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 5274.555538] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 5274.555813] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 5274.555934] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 5274.563465] wlp2s0: deauthenticating from 1c:aa:07:ec:1c:e0 by local choice (Reason: 3=DEAUTH_LEAVING) [ 5274.569924] [drm:edp_panel_vdd_on] Turning eDP port C VDD on [ 5274.569936] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f [ 5274.569941] [drm:intel_edp_backlight_off] [ 5274.770434] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0 [ 5274.770617] [drm:edp_panel_off] Turn eDP port C panel power off [ 5274.770623] [drm:wait_panel_off] Wait for panel power off time [ 5274.770629] [drm:wait_panel_status] mask b0000000 value 00000000 status e0000003 control abcd0000 [ 5274.810332] [drm:intel_get_hpd_pins] hotplug event received, stat 0x00100000, dig 0x00100000, pins 0x00000040 [ 5274.810339] [drm:intel_hpd_irq_handler] digital hpd port C - long [ 5274.810343] [drm:intel_hpd_irq_storm_detect] Received HPD interrupt on PIN 6 - cnt: 0 [ 5274.810363] [drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port C [ 5274.810485] [drm:wait_panel_status] Wait complete [ 5274.810504] [drm:intel_disable_pipe] disabling pipe A [ 5274.812529] [drm:intel_dp_link_down] [ 5274.885557] [drm:chv_phy_powergate_lanes] Power gating DPIO PHY0 CH1 lanes 0x0 (PHY_CONTROL=0x050007fd) [ 5274.896889] [drm:intel_power_well_disable] disabling dpio-common-bc [ 5274.906056] [drm:chv_dpio_cmn_power_well_disable] Disabled DPIO PHY0 (PHY_CONTROL=0x050007fc) [ 5274.915369] [drm:intel_power_well_disable] disabling display [ 5274.924729] [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511 [ 5274.924763] [drm:vlv_update_wm] Setting FIFO watermarks - A: plane=0, cursor=0, sprite0=0, sprite1=0, SR: plane=0, cursor=0 level=1 cxsr=0 [ 5274.924784] [drm:intel_connector_check_state] [CONNECTOR:47:eDP-1] [ 5274.924791] [drm:check_encoder_state] [ENCODER:39:TMDS-39] [ 5274.924799] [drm:check_encoder_state] [ENCODER:43:TMDS-43] [ 5274.924804] [drm:check_encoder_state] [ENCODER:46:TMDS-46] [ 5274.924809] [drm:check_encoder_state] [ENCODER:52:TMDS-52] [ 5274.924814] [drm:check_encoder_state] [ENCODER:54:TMDS-54] [ 5274.924819] [drm:check_crtc_state] [CRTC:26] [ 5274.925068] [drm:drm_mode_setcrtc] [CRTC:26] [ 5274.925083] [drm:drm_mode_setcrtc] [CONNECTOR:47:eDP-1] [ 5274.925108] [drm:connected_sink_compute_bpp] [CONNECTOR:47:eDP-1] checking for sink bpp constrains [ 5274.925113] [drm:connected_sink_compute_bpp] clamping display bpp (was 30) to EDID reported max of 18 [ 5274.925122] [drm:intel_dp_compute_config] DP link computation with max lane count 1 max bw 270000 pixel clock 75610KHz [ 5274.925129] [drm:intel_dp_compute_config] DP link bw 0a rate select 00 lane count 1 clock 270000 bpp 18 [ 5274.925133] [drm:intel_dp_compute_config] DP link bw required 136098 available 216000 [ 5274.925139] [drm:intel_modeset_pipe_config] hw max bpp: 30, pipe bpp: 18, dithering: 1 [ 5274.925148] [drm:intel_dump_pipe_config] [CRTC:26][modeset] config ffff88004ba11800 for pipe A [ 5274.925153] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 5274.925156] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1 [ 5274.925163] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 5274.925168] [drm:intel_dump_pipe_config] dp: 1, lanes: 1, gmch_m: 2642761, gmch_n: 4194304, link_m: 146820, link_n: 524288, tu: 64 [ 5274.925173] [drm:intel_dump_pipe_config] dp: 1, lanes: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 5274.925177] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 5274.925180] [drm:intel_dump_pipe_config] requested mode: [ 5274.925188] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 75610 1366 1406 1438 1574 768 771 777 800 0x0 0xa [ 5274.925191] [drm:intel_dump_pipe_config] adjusted mode: [ 5274.925198] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 75610 1366 1406 1438 1574 768 771 777 800 0x48 0xa [ 5274.925204] [drm:intel_dump_crtc_timings] crtc timings: 75610 1366 1406 1438 1574 768 771 777 800, type: 0x48 flags: 0xa [ 5274.925208] [drm:intel_dump_pipe_config] port clock: 270000 [ 5274.925211] [drm:intel_dump_pipe_config] pipe src size: 1366x768 [ 5274.925215] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0 [ 5274.925219] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 5274.925224] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 5274.925227] [drm:intel_dump_pipe_config] ips: 0 [ 5274.925231] [drm:intel_dump_pipe_config] double wide: 0 [ 5274.925237] [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0xb0002000, dpll_md: 0x0, fp0: 0x0, fp1: 0x0 [ 5274.925240] [drm:intel_dump_pipe_config] planes on this crtc [ 5274.925247] [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 0.0 idx: 0 enabled [ 5274.925253] [drm:intel_dump_pipe_config] FB:65, fb = 1366x768 format = 0x34325258 [ 5274.925259] [drm:intel_dump_pipe_config] scaler:0 src (0, 0) 0x0 dst (0, 0) 0x0 [ 5274.925264] [drm:intel_dump_pipe_config] CURSOR PLANE:25 plane: 0.1 idx: 1 disabled, scaler_id = 0 [ 5274.925270] [drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 0.1 idx: 2 disabled, scaler_id = 0 [ 5274.925275] [drm:intel_dump_pipe_config] STANDARD PLANE:28 plane: 0.2 idx: 3 disabled, scaler_id = 0 [ 5274.925301] [drm:intel_set_memory_cxsr] memory self-refresh is disabled [ 5274.925310] [drm:intel_power_well_enable] enabling display [ 5274.934361] [drm:i915_redisable_vga_power_on] Something enabled VGA plane, disabling it [ 5274.934915] [drm:intel_power_well_enable] enabling dpio-common-bc [ 5274.952947] [drm:chv_dpio_cmn_power_well_enable] Enabled DPIO PHY0 (PHY_CONTROL=0x050007fd) [ 5274.962090] [drm:chv_phy_powergate_lanes] Power gating DPIO PHY0 CH1 lanes 0xe (PHY_CONTROL=0x150707fd) [ 5275.053037] [drm:vlv_init_panel_power_sequencer] initializing pipe A power sequencer for port C [ 5275.053075] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x87d00001, PP_OFF 0x1f40001, PP_DIV 0x270f06 [ 5275.053101] [drm:edp_panel_vdd_on] Turning eDP port C VDD on [ 5275.053109] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 5275.375014] [drm:wait_panel_status] mask b800000f value 00000000 status 08000001 control 00000000 [ 5275.496903] [drm:wait_panel_status] Wait complete [ 5275.496943] [drm:edp_panel_vdd_on] PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0008 [ 5275.496958] [drm:edp_panel_vdd_on] eDP port C panel power wasn't enabled [ 5275.579622] [drm:intel_get_hpd_pins] hotplug event received, stat 0x00100000, dig 0x00100000, pins 0x00000040 [ 5275.579649] [drm:intel_hpd_irq_handler] digital hpd port C - long [ 5275.579664] [drm:intel_hpd_irq_storm_detect] Received HPD interrupt on PIN 6 - cnt: 1 [ 5275.580008] [drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port C [ 5275.699110] [drm:edp_panel_on] Turn eDP port C panel power on [ 5275.699126] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 5275.699141] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0008 [ 5275.699147] [drm:wait_panel_status] Wait complete [ 5275.699160] [drm:wait_panel_on] Wait for panel power on [ 5275.699169] [drm:wait_panel_status] mask b000000f value 80000008 status 9000000a control abcd000b [ 5275.861668] [drm:wait_panel_status] Wait complete [ 5275.861681] [drm:edp_panel_vdd_off_sync] Turning eDP port C VDD off [ 5275.861694] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0003 [ 5275.861712] [drm:edp_panel_vdd_on] Turning eDP port C VDD on [ 5275.861721] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b [ 5275.889268] [drm:intel_dp_set_signal_levels] Using vswing level 0 [ 5275.889289] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0 [ 5275.890157] [drm:intel_dp_link_training_clock_recovery] clock recovery OK [ 5275.891471] [drm:intel_dp_link_training_channel_equalization] Channel EQ done. DP Training successful [ 5275.891722] [drm:intel_enable_pipe] enabling pipe A [ 5275.891750] [drm:intel_edp_backlight_on] [ 5275.891757] [drm:intel_panel_enable_backlight] pipe A [ 5275.891767] [drm:intel_panel_actually_set_backlight] set backlight PWM = 1562 [ 5275.891780] [drm:intel_psr_enable] PSR not supported by this panel [ 5275.891798] [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511 [ 5275.891816] [drm:vlv_update_wm] Setting FIFO watermarks - A: plane=425, cursor=63, sprite0=0, sprite1=0, SR: plane=0, cursor=0 level=1 cxsr=0 [ 5275.908680] [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511 [ 5275.908697] [drm:vlv_update_wm] Setting FIFO watermarks - A: plane=425, cursor=63, sprite0=0, sprite1=0, SR: plane=1449, cursor=0 level=1 cxsr=1 [ 5275.908707] [drm:intel_set_memory_cxsr] memory self-refresh is enabled [ 5275.908731] [drm:intel_connector_check_state] [CONNECTOR:47:eDP-1] [ 5275.908743] [drm:check_encoder_state] [ENCODER:39:TMDS-39] [ 5275.908753] [drm:check_encoder_state] [ENCODER:43:TMDS-43] [ 5275.908759] [drm:check_encoder_state] [ENCODER:46:TMDS-46] [ 5275.908764] [drm:check_encoder_state] [ENCODER:52:TMDS-52] [ 5275.908769] [drm:check_encoder_state] [ENCODER:54:TMDS-54] [ 5275.908778] [drm:check_crtc_state] [CRTC:26] [ 5275.920255] [drm:intel_dp_detect] [CONNECTOR:47:eDP-1] [ 5275.920828] [drm:drm_helper_hpd_irq_event] [CONNECTOR:47:eDP-1] status updated from connected to connected [ 5275.920833] [drm:intel_dp_detect] [CONNECTOR:40:DP-1] [ 5275.920842] [drm:drm_helper_hpd_irq_event] [CONNECTOR:40:DP-1] status updated from disconnected to disconnected [ 5275.920846] [drm:intel_hdmi_detect] [CONNECTOR:44:HDMI-A-1] [ 5276.047250] [drm:intel_hdmi_detect] HDMI live status down [ 5276.047266] [drm:drm_helper_hpd_irq_event] [CONNECTOR:44:HDMI-A-1] status updated from disconnected to disconnected [ 5276.047272] [drm:intel_dp_detect] [CONNECTOR:53:DP-2] [ 5276.047279] [drm:intel_power_well_enable] enabling dpio-common-d [ 5276.065288] [drm:chv_dpio_cmn_power_well_enable] Enabled DPIO PHY1 (PHY_CONTROL=0x150707ff) [ 5276.076973] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064 [ 5276.079498] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064 [ 5276.089779] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064 [ 5276.097780] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064 [ 5276.103259] [drm:intel_power_well_disable] disabling dpio-common-d [ 5276.114255] [drm:chv_dpio_cmn_power_well_disable] Disabled DPIO PHY1 (PHY_CONTROL=0x150707fd) [ 5276.123668] [drm:drm_helper_hpd_irq_event] [CONNECTOR:53:DP-2] status updated from disconnected to disconnected [ 5276.123678] [drm:intel_hdmi_detect] [CONNECTOR:55:HDMI-A-2] [ 5276.124585] [drm:gmbus_xfer] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1) [ 5276.124606] [drm:gmbus_xfer] GMBUS [i915 gmbus panel] NAK on first message, retry [ 5276.125248] [drm:gmbus_xfer] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1) [ 5276.125276] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel [ 5276.125296] [drm:drm_helper_hpd_irq_event] [CONNECTOR:55:HDMI-A-2] status updated from disconnected to disconnected [ 5276.125434] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=1562/1562 [ 5276.125441] [drm:intel_panel_actually_set_backlight] set backlight PWM = 1562 [ 5276.127217] [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511 [ 5276.127256] [drm:vlv_update_wm] Setting FIFO watermarks - A: plane=425, cursor=0, sprite0=0, sprite1=0, SR: plane=1449, cursor=0 level=1 cxsr=1 [ 5276.135413] [drm:drm_mode_getconnector] [CONNECTOR:47:?] [ 5276.136644] [drm:drm_mode_getconnector] [CONNECTOR:40:?] [ 5276.136665] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:40:DP-1] [ 5276.136678] [drm:intel_dp_detect] [CONNECTOR:40:DP-1] [ 5276.136703] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:40:DP-1] disconnected [ 5276.136732] [drm:drm_mode_getconnector] [CONNECTOR:53:?] [ 5276.136746] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:53:DP-2] [ 5276.136756] [drm:intel_dp_detect] [CONNECTOR:53:DP-2] [ 5276.136769] [drm:intel_power_well_enable] enabling dpio-common-d [ 5276.165273] [drm:chv_dpio_cmn_power_well_enable] Enabled DPIO PHY1 (PHY_CONTROL=0x150707ff) [ 5276.175514] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064 [ 5276.177964] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064 [ 5276.185439] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064 [ 5276.193453] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064 [ 5276.198990] [drm:intel_power_well_disable] disabling dpio-common-d [ 5276.207025] [drm:chv_dpio_cmn_power_well_disable] Disabled DPIO PHY1 (PHY_CONTROL=0x150707fd) [ 5276.215133] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:53:DP-2] disconnected [ 5276.215173] [drm:drm_mode_getconnector] [CONNECTOR:44:?] [ 5276.215178] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:44:HDMI-A-1] [ 5276.215181] [drm:intel_hdmi_detect] [CONNECTOR:44:HDMI-A-1] [ 5276.343379] [drm:intel_hdmi_detect] HDMI live status down [ 5276.343396] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:44:HDMI-A-1] disconnected [ 5276.343447] [drm:drm_mode_getconnector] [CONNECTOR:55:?] [ 5276.343454] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:55:HDMI-A-2] [ 5276.343459] [drm:intel_hdmi_detect] [CONNECTOR:55:HDMI-A-2] [ 5276.344116] [drm:gmbus_xfer] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1) [ 5276.344125] [drm:gmbus_xfer] GMBUS [i915 gmbus panel] NAK on first message, retry [ 5276.344986] [drm:gmbus_xfer] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1) [ 5276.344998] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel [ 5276.345007] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:55:HDMI-A-2] disconnected [ 5276.349951] [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511 [ 5276.349966] [drm:vlv_update_wm] Setting FIFO watermarks - A: plane=425, cursor=63, sprite0=0, sprite1=0, SR: plane=1449, cursor=0 level=1 cxsr=1 [ 5276.350379] [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511 [ 5276.350392] [drm:vlv_update_wm] Setting FIFO watermarks - A: plane=425, cursor=0, sprite0=0, sprite1=0, SR: plane=1449, cursor=0 level=1 cxsr=1 [ 5276.350902] [drm:drm_mode_getconnector] [CONNECTOR:47:?] [ 5277.228602] PM: Syncing filesystems ... done. [ 5277.252052] PM: Preparing system for sleep (mem) [ 5277.264069] Freezing user space processes ... (elapsed 0.002 seconds) done. [ 5277.266194] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 5277.267671] PM: Suspending system (mem) [ 5277.267694] Suspending console(s) (use no_console_suspend to debug) [ 5277.285199] [drm:intel_power_well_enable] enabling always-on [ 5277.285201] [drm:intel_power_well_enable] enabling dpio-common-d [ 5277.301311] [drm:chv_dpio_cmn_power_well_enable] Enabled DPIO PHY1 (PHY_CONTROL=0x150707ff) [ 5277.311625] [drm:connected_sink_compute_bpp] [CONNECTOR:47:eDP-1] checking for sink bpp constrains [ 5277.311627] [drm:connected_sink_compute_bpp] clamping display bpp (was 30) to EDID reported max of 18 [ 5277.311633] [drm:intel_dp_compute_config] DP link computation with max lane count 1 max bw 270000 pixel clock 75610KHz [ 5277.311636] [drm:intel_dp_compute_config] DP link bw 0a rate select 00 lane count 1 clock 270000 bpp 18 [ 5277.311637] [drm:intel_dp_compute_config] DP link bw required 136098 available 216000 [ 5277.311639] [drm:intel_modeset_pipe_config] hw max bpp: 30, pipe bpp: 18, dithering: 1 [ 5277.311643] [drm:intel_dump_pipe_config] [CRTC:26][modeset] config ffff880072471c00 for pipe A [ 5277.311644] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 5277.311645] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1 [ 5277.311647] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 5277.311650] [drm:intel_dump_pipe_config] dp: 1, lanes: 1, gmch_m: 2642761, gmch_n: 4194304, link_m: 146820, link_n: 524288, tu: 64 [ 5277.311652] [drm:intel_dump_pipe_config] dp: 1, lanes: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 5277.311653] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 5277.311654] [drm:intel_dump_pipe_config] requested mode: [ 5277.311657] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 75610 1366 1406 1438 1574 768 771 777 800 0x0 0xa [ 5277.311658] [drm:intel_dump_pipe_config] adjusted mode: [ 5277.311661] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 75610 1366 1406 1438 1574 768 771 777 800 0x48 0xa [ 5277.311664] [drm:intel_dump_crtc_timings] crtc timings: 75610 1366 1406 1438 1574 768 771 777 800, type: 0x48 flags: 0xa [ 5277.311665] [drm:intel_dump_pipe_config] port clock: 270000 [ 5277.311666] [drm:intel_dump_pipe_config] pipe src size: 1366x768 [ 5277.311668] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0 [ 5277.311669] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 5277.311671] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 5277.311672] [drm:intel_dump_pipe_config] ips: 0 [ 5277.311673] [drm:intel_dump_pipe_config] double wide: 0 [ 5277.311674] [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0xb0002000, dpll_md: 0x0, fp0: 0x0, fp1: 0x0 [ 5277.311675] [drm:intel_dump_pipe_config] planes on this crtc [ 5277.311679] [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 0.0 idx: 0 enabled [ 5277.311682] [drm:intel_dump_pipe_config] FB:65, fb = 1366x768 format = 0x34325258 [ 5277.311682] [drm:intel_dump_pipe_config] scaler:0 src (0, 0) 1366x768 dst (0, 0) 1366x768 [ 5277.311685] [drm:intel_dump_pipe_config] CURSOR PLANE:25 plane: 0.1 idx: 1 enabled [ 5277.311688] [drm:intel_dump_pipe_config] FB:56, fb = 64x64 format = 0x34325241 [ 5277.311688] [drm:intel_dump_pipe_config] scaler:0 src (0, 0) 64x64 dst (509, 319) 64x64 [ 5277.311690] [drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 0.1 idx: 2 disabled, scaler_id = 0 [ 5277.311692] [drm:intel_dump_pipe_config] STANDARD PLANE:28 plane: 0.2 idx: 3 disabled, scaler_id = 0 [ 5277.311716] [drm:intel_set_memory_cxsr] memory self-refresh is disabled [ 5277.324696] [drm:intel_set_memory_cxsr] memory self-refresh is disabled [ 5277.341350] [drm:intel_edp_backlight_off] [ 5277.543581] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0 [ 5277.543759] [drm:edp_panel_off] Turn eDP port C panel power off [ 5277.543763] [drm:wait_panel_off] Wait for panel power off time [ 5277.543769] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control abcd0000 [ 5277.583747] [drm:intel_get_hpd_pins] hotplug event received, stat 0x00100000, dig 0x00100000, pins 0x00000040 [ 5277.583756] [drm:intel_hpd_irq_handler] digital hpd port C - long [ 5277.583764] [drm:intel_hpd_irq_storm_detect] Received HPD interrupt on PIN 6 - cnt: 0 [ 5277.583823] [drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port C [ 5277.584189] [drm:wait_panel_status] Wait complete [ 5277.584209] [drm:intel_disable_pipe] disabling pipe A [ 5277.591506] [drm:intel_dp_link_down] [ 5277.662557] [drm:chv_phy_powergate_lanes] Power gating DPIO PHY0 CH1 lanes 0x0 (PHY_CONTROL=0x050007ff) [ 5277.674196] [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511 [ 5277.674217] [drm:vlv_update_wm] Setting FIFO watermarks - A: plane=0, cursor=0, sprite0=0, sprite1=0, SR: plane=0, cursor=0 level=1 cxsr=0 [ 5277.674241] [drm:intel_connector_check_state] [CONNECTOR:47:eDP-1] [ 5277.674253] [drm:check_encoder_state] [ENCODER:39:TMDS-39] [ 5277.674265] [drm:check_encoder_state] [ENCODER:43:TMDS-43] [ 5277.674270] [drm:check_encoder_state] [ENCODER:46:TMDS-46] [ 5277.674275] [drm:check_encoder_state] [ENCODER:52:TMDS-52] [ 5277.674281] [drm:check_encoder_state] [ENCODER:54:TMDS-54] [ 5277.674287] [drm:check_crtc_state] [CRTC:26] [ 5277.737463] [drm:intel_power_well_disable] disabling dpio-common-d [ 5277.746774] [drm:chv_dpio_cmn_power_well_disable] Disabled DPIO PHY1 (PHY_CONTROL=0x050007fd) [ 5277.756206] [drm:intel_power_well_disable] disabling dpio-common-bc [ 5277.765482] [drm:chv_dpio_cmn_power_well_disable] Disabled DPIO PHY0 (PHY_CONTROL=0x050007fc) [ 5277.772399] [drm:intel_power_well_disable] disabling display [ 5277.779422] [drm:intel_power_well_disable] disabling always-on [ 5277.779477] PM: suspend of devices complete after 511.193 msecs [ 5277.800336] PM: late suspend of devices complete after 20.829 msecs [ 5277.801848] r8169 0000:01:00.0: System wakeup enabled by ACPI [ 5277.802266] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [ 5277.816827] PM: noirq suspend of devices complete after 16.478 msecs [ 5277.816864] ACPI: Preparing to enter system sleep state S3 [ 5277.868042] ACPI : EC: EC stopped [ 5277.868044] PM: Saving platform NVS memory [ 5277.868141] Disabling non-boot CPUs ... [ 5277.868631] Broke affinity for irq 1 [ 5277.868651] Broke affinity for irq 9 [ 5277.868666] Broke affinity for irq 34 [ 5277.868676] Broke affinity for irq 37 [ 5277.868725] Broke affinity for irq 115 [ 5277.868879] Broke affinity for irq 311 [ 5277.868901] Broke affinity for irq 315 [ 5277.870062] smpboot: CPU 1 is now offline [ 5277.881064] ACPI: Low-level resume complete [ 5277.881151] ACPI : EC: EC started [ 5277.881152] PM: Restoring platform NVS memory [ 5277.881944] Enabling non-boot CPUs ... [ 5277.901539] x86: Booting SMP configuration: [ 5277.901541] smpboot: Booting Node 0 Processor 1 APIC 0x4 [ 5277.909557] cache: parent cpu1 should not be sleeping [ 5277.909961] CPU1 is up [ 5277.910767] ACPI: Waking up from system sleep state S3 [ 5278.029875] intel-vbtn INT33D6:00: unknown event index 0xcd [ 5278.242762] acpi LNXPOWER:03: Turning OFF [ 5278.242882] acpi LNXPOWER:02: Turning OFF [ 5278.245493] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [ 5278.258447] PM: noirq resume of devices complete after 15.410 msecs [ 5278.270601] [drm:chv_phy_control_init] Initial PHY_CONTROL=0x050007fc [ 5278.270606] [drm:intel_power_well_enable] enabling always-on [ 5278.270608] [drm:intel_power_well_enable] enabling display [ 5278.272899] [drm:intel_power_well_enable] enabling dpio-common-bc [ 5278.291624] [drm:chv_dpio_cmn_power_well_enable] Enabled DPIO PHY0 (PHY_CONTROL=0x050007fd) [ 5278.300771] [drm:intel_power_well_enable] enabling dpio-common-d [ 5278.319393] [drm:chv_dpio_cmn_power_well_enable] Enabled DPIO PHY1 (PHY_CONTROL=0x050007ff) [ 5279.273096] PM: early resume of devices complete after 1014.042 msecs [ 5279.275652] r8169 0000:01:00.0: System wakeup disabled by ACPI [ 5279.285448] rtc_cmos 00:04: System wakeup disabled by ACPI [ 5279.323265] xhci_hcd 0000:00:14.0: port 4 resume PLC timeout [ 5279.338291] [drm:i915_redisable_vga_power_on] Something enabled VGA plane, disabling it [ 5279.338608] [drm:intel_opregion_setup] graphic opregion physical addr: 0x76677000 [ 5279.338652] [drm:intel_opregion_setup] Public ACPI methods supported [ 5279.338653] [drm:intel_opregion_setup] ASLE supported [ 5279.338671] [drm:vlv_initial_power_sequencer_setup] no initial power sequencer for port C [ 5279.338732] [drm:gen8_init_common_ring] Execlists enabled for render ring [ 5279.338740] [drm:gen8_init_common_ring] Execlists enabled for bsd ring [ 5279.338745] [drm:gen8_init_common_ring] Execlists enabled for blitter ring [ 5279.338751] [drm:gen8_init_common_ring] Execlists enabled for video enhancement ring [ 5279.341068] [drm:intel_update_cdclk] Current CD clock rate: 266667 kHz [ 5279.341128] [drm:intel_modeset_readout_hw_state] [CRTC:26] hw state readout: disabled [ 5279.341133] [drm:intel_modeset_readout_hw_state] [CRTC:31] hw state readout: disabled [ 5279.341139] [drm:intel_modeset_readout_hw_state] [CRTC:36] hw state readout: disabled [ 5279.341145] [drm:intel_modeset_readout_hw_state] [ENCODER:39:TMDS-39] hw state readout: disabled, pipe A [ 5279.341150] [drm:intel_modeset_readout_hw_state] [ENCODER:43:TMDS-43] hw state readout: disabled, pipe A [ 5279.341153] [drm:intel_modeset_readout_hw_state] [ENCODER:46:TMDS-46] hw state readout: disabled, pipe A [ 5279.341157] [drm:intel_modeset_readout_hw_state] [ENCODER:52:TMDS-52] hw state readout: disabled, pipe A [ 5279.341161] [drm:intel_modeset_readout_hw_state] [ENCODER:54:TMDS-54] hw state readout: disabled, pipe A [ 5279.341165] [drm:intel_modeset_readout_hw_state] [CONNECTOR:47:eDP-1] hw state readout: disabled [ 5279.341169] [drm:intel_modeset_readout_hw_state] [CONNECTOR:40:DP-1] hw state readout: disabled [ 5279.341175] [drm:intel_modeset_readout_hw_state] [CONNECTOR:44:HDMI-A-1] hw state readout: disabled [ 5279.341179] [drm:intel_modeset_readout_hw_state] [CONNECTOR:53:DP-2] hw state readout: disabled [ 5279.341183] [drm:intel_modeset_readout_hw_state] [CONNECTOR:55:HDMI-A-2] hw state readout: disabled [ 5279.341192] [drm:intel_dump_pipe_config] [CRTC:26][setup_hw_state] config ffff880072471c00 for pipe A [ 5279.341194] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 5279.341195] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 5279.341198] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 5279.341201] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 5279.341203] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 5279.341205] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 5279.341206] [drm:intel_dump_pipe_config] requested mode: [ 5279.341212] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 5279.341213] [drm:intel_dump_pipe_config] adjusted mode: [ 5279.341217] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 5279.341221] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 5279.341222] [drm:intel_dump_pipe_config] port clock: 0 [ 5279.341224] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 5279.341227] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0 [ 5279.341231] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 5279.341233] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 5279.341234] [drm:intel_dump_pipe_config] ips: 0 [ 5279.341235] [drm:intel_dump_pipe_config] double wide: 0 [ 5279.341238] [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0x0, dpll_md: 0x0, fp0: 0x0, fp1: 0x0 [ 5279.341239] [drm:intel_dump_pipe_config] planes on this crtc [ 5279.341246] [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 0.0 idx: 0 enabled [ 5279.341249] [drm:intel_dump_pipe_config] FB:65, fb = 1366x768 format = 0x34325258 [ 5279.341249] [drm:intel_dump_pipe_config] scaler:0 src (0, 0) 0x0 dst (0, 0) 0x0 [ 5279.341256] [drm:intel_dump_pipe_config] CURSOR PLANE:25 plane: 0.1 idx: 1 enabled [ 5279.341260] [drm:intel_dump_pipe_config] FB:56, fb = 64x64 format = 0x34325241 [ 5279.341260] [drm:intel_dump_pipe_config] scaler:0 src (0, 0) 4294966787x4294966977 dst (509, 319) 4294966787x4294966977 [ 5279.341263] [drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 0.1 idx: 2 disabled, scaler_id = 0 [ 5279.341265] [drm:intel_dump_pipe_config] STANDARD PLANE:28 plane: 0.2 idx: 3 disabled, scaler_id = 0 [ 5279.341269] [drm:intel_dump_pipe_config] [CRTC:31][setup_hw_state] config ffff880072472400 for pipe B [ 5279.341271] [drm:intel_dump_pipe_config] cpu_transcoder: B [ 5279.341272] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 5279.341275] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 5279.341277] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 5279.341280] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 5279.341281] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 5279.341282] [drm:intel_dump_pipe_config] requested mode: [ 5279.341286] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 5279.341287] [drm:intel_dump_pipe_config] adjusted mode: [ 5279.341290] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 5279.341293] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 5279.341295] [drm:intel_dump_pipe_config] port clock: 0 [ 5279.341296] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 5279.341300] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0 [ 5279.341302] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 5279.341303] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 5279.341305] [drm:intel_dump_pipe_config] ips: 0 [ 5279.341306] [drm:intel_dump_pipe_config] double wide: 0 [ 5279.341308] [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0x0, dpll_md: 0x0, fp0: 0x0, fp1: 0x0 [ 5279.341309] [drm:intel_dump_pipe_config] planes on this crtc [ 5279.341312] [drm:intel_dump_pipe_config] STANDARD PLANE:29 plane: 1.0 idx: 4 disabled, scaler_id = 0 [ 5279.341314] [drm:intel_dump_pipe_config] CURSOR PLANE:30 plane: 1.2 idx: 5 disabled, scaler_id = 0 [ 5279.341317] [drm:intel_dump_pipe_config] STANDARD PLANE:32 plane: 1.1 idx: 6 disabled, scaler_id = 0 [ 5279.341319] [drm:intel_dump_pipe_config] STANDARD PLANE:33 plane: 1.2 idx: 7 disabled, scaler_id = 0 [ 5279.341324] [drm:intel_dump_pipe_config] [CRTC:36][setup_hw_state] config ffff880072470000 for pipe C [ 5279.341325] [drm:intel_dump_pipe_config] cpu_transcoder: C [ 5279.341327] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 5279.341329] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 5279.341331] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 5279.341334] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 5279.341336] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 5279.341337] [drm:intel_dump_pipe_config] requested mode: [ 5279.341340] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 5279.341341] [drm:intel_dump_pipe_config] adjusted mode: [ 5279.341345] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 5279.341348] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 5279.341349] [drm:intel_dump_pipe_config] port clock: 0 [ 5279.341351] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 5279.341354] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0 [ 5279.341356] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 5279.341358] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 5279.341359] [drm:intel_dump_pipe_config] ips: 0 [ 5279.341360] [drm:intel_dump_pipe_config] double wide: 0 [ 5279.341362] [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0x0, dpll_md: 0x0, fp0: 0x0, fp1: 0x0 [ 5279.341363] [drm:intel_dump_pipe_config] planes on this crtc [ 5279.341366] [drm:intel_dump_pipe_config] STANDARD PLANE:34 plane: 2.0 idx: 8 disabled, scaler_id = 0 [ 5279.341369] [drm:intel_dump_pipe_config] CURSOR PLANE:35 plane: 2.3 idx: 9 disabled, scaler_id = 0 [ 5279.341371] [drm:intel_dump_pipe_config] STANDARD PLANE:37 plane: 2.1 idx: 10 disabled, scaler_id = 0 [ 5279.341374] [drm:intel_dump_pipe_config] STANDARD PLANE:38 plane: 2.2 idx: 11 disabled, scaler_id = 0 [ 5279.341391] [drm:vlv_get_fifo_size] Pipe A primary A FIFO size: 256 [ 5279.341394] [drm:vlv_get_fifo_size] Pipe A sprite A FIFO size: 128 [ 5279.341398] [drm:vlv_get_fifo_size] Pipe A sprite B FIFO size: 127 [ 5279.341402] [drm:vlv_get_fifo_size] Pipe B primary B FIFO size: 256 [ 5279.341406] [drm:vlv_get_fifo_size] Pipe B sprite C FIFO size: 128 [ 5279.341410] [drm:vlv_get_fifo_size] Pipe B sprite D FIFO size: 127 [ 5279.341414] [drm:vlv_get_fifo_size] Pipe C primary C FIFO size: 256 [ 5279.341418] [drm:vlv_get_fifo_size] Pipe C sprite E FIFO size: 128 [ 5279.341422] [drm:vlv_get_fifo_size] Pipe C sprite F FIFO size: 127 [ 5279.342885] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout [ 5279.345985] r8169 0000:01:00.0 enp1s0: link down [ 5279.357085] [drm:vlv_wm_get_hw_state] Punit not acking DDR DVFS request, assuming DDR DVFS is disabled [ 5279.357102] [drm:vlv_wm_get_hw_state] Initial watermarks: pipe A, plane=15, cursor=15, sprite0=15, sprite1=15 [ 5279.357104] [drm:vlv_wm_get_hw_state] Initial watermarks: pipe B, plane=15, cursor=15, sprite0=15, sprite1=15 [ 5279.357106] [drm:vlv_wm_get_hw_state] Initial watermarks: pipe C, plane=15, cursor=15, sprite0=15, sprite1=15 [ 5279.357109] [drm:vlv_wm_get_hw_state] Initial watermarks: SR plane=127, SR cursor=0 level=0 cxsr=0 [ 5279.357114] [drm:intel_power_well_disable] disabling dpio-common-d [ 5279.367345] [drm:chv_dpio_cmn_power_well_disable] Disabled DPIO PHY1 (PHY_CONTROL=0x050007fd) [ 5279.376493] [drm:intel_power_well_disable] disabling dpio-common-bc [ 5279.385378] [drm:chv_dpio_cmn_power_well_disable] Disabled DPIO PHY0 (PHY_CONTROL=0x050007fc) [ 5279.394493] [drm:intel_power_well_disable] disabling always-on [ 5279.394557] [drm:connected_sink_compute_bpp] [CONNECTOR:47:eDP-1] checking for sink bpp constrains [ 5279.394559] [drm:connected_sink_compute_bpp] clamping display bpp (was 30) to EDID reported max of 18 [ 5279.394566] [drm:intel_dp_compute_config] DP link computation with max lane count 1 max bw 270000 pixel clock 75610KHz [ 5279.394570] [drm:intel_dp_compute_config] DP link bw 0a rate select 00 lane count 1 clock 270000 bpp 18 [ 5279.394572] [drm:intel_dp_compute_config] DP link bw required 136098 available 216000 [ 5279.394575] [drm:intel_modeset_pipe_config] hw max bpp: 30, pipe bpp: 18, dithering: 1 [ 5279.394579] [drm:intel_dump_pipe_config] [CRTC:26][modeset] config ffff88006f2f2c00 for pipe A [ 5279.394581] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 5279.394582] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1 [ 5279.394585] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 5279.394588] [drm:intel_dump_pipe_config] dp: 1, lanes: 1, gmch_m: 2642761, gmch_n: 4194304, link_m: 146820, link_n: 524288, tu: 64 [ 5279.394591] [drm:intel_dump_pipe_config] dp: 1, lanes: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 5279.394592] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 5279.394593] [drm:intel_dump_pipe_config] requested mode: [ 5279.394600] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 75610 1366 1406 1438 1574 768 771 777 800 0x0 0xa [ 5279.394601] [drm:intel_dump_pipe_config] adjusted mode: [ 5279.394605] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 75610 1366 1406 1438 1574 768 771 777 800 0x48 0xa [ 5279.394608] [drm:intel_dump_crtc_timings] crtc timings: 75610 1366 1406 1438 1574 768 771 777 800, type: 0x48 flags: 0xa [ 5279.394610] [drm:intel_dump_pipe_config] port clock: 270000 [ 5279.394612] [drm:intel_dump_pipe_config] pipe src size: 1366x768 [ 5279.394613] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0 [ 5279.394615] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 5279.394618] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 5279.394619] [drm:intel_dump_pipe_config] ips: 0 [ 5279.394620] [drm:intel_dump_pipe_config] double wide: 0 [ 5279.394623] [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0xb0002000, dpll_md: 0x0, fp0: 0x0, fp1: 0x0 [ 5279.394624] [drm:intel_dump_pipe_config] planes on this crtc [ 5279.394632] [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 0.0 idx: 0 enabled [ 5279.394635] [drm:intel_dump_pipe_config] FB:65, fb = 1366x768 format = 0x34325258 [ 5279.394635] [drm:intel_dump_pipe_config] scaler:0 src (0, 0) 0x0 dst (0, 0) 0x0 [ 5279.394640] [drm:intel_dump_pipe_config] CURSOR PLANE:25 plane: 0.1 idx: 1 enabled [ 5279.394645] [drm:intel_dump_pipe_config] FB:56, fb = 64x64 format = 0x34325241 [ 5279.394645] [drm:intel_dump_pipe_config] scaler:0 src (0, 0) 4294966787x4294966977 dst (509, 319) 4294966787x4294966977 [ 5279.394648] [drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 0.1 idx: 2 disabled, scaler_id = 0 [ 5279.394652] [drm:intel_dump_pipe_config] STANDARD PLANE:28 plane: 0.2 idx: 3 disabled, scaler_id = 0 [ 5279.394680] [drm:intel_set_memory_cxsr] memory self-refresh is disabled [ 5279.394688] [drm:intel_power_well_enable] enabling dpio-common-bc [ 5279.412024] [drm:chv_dpio_cmn_power_well_enable] Enabled DPIO PHY0 (PHY_CONTROL=0x050007fd) [ 5279.421058] [drm:chv_phy_powergate_lanes] Power gating DPIO PHY0 CH1 lanes 0xe (PHY_CONTROL=0x150707fd) [ 5279.507843] [drm:vlv_init_panel_power_sequencer] initializing pipe A power sequencer for port C [ 5279.507855] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x87d00001, PP_OFF 0x1f40001, PP_DIV 0x270f06 [ 5279.507868] [drm:edp_panel_vdd_on] Turning eDP port C VDD on [ 5279.507874] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 5279.507883] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control 00000000 [ 5279.507887] [drm:wait_panel_status] Wait complete [ 5279.507896] [drm:edp_panel_vdd_on] PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0008 [ 5279.507900] [drm:edp_panel_vdd_on] eDP port C panel power wasn't enabled [ 5279.571491] usb 1-3: reset high-speed USB device number 2 using xhci_hcd [ 5279.590104] [drm:intel_get_hpd_pins] hotplug event received, stat 0x00100000, dig 0x00100000, pins 0x00000040 [ 5279.590106] [drm:intel_hpd_irq_handler] digital hpd port C - long [ 5279.590108] [drm:intel_hpd_irq_storm_detect] Received HPD interrupt on PIN 6 - cnt: 0 [ 5279.590125] [drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port C [ 5279.710304] [drm:edp_panel_on] Turn eDP port C panel power on [ 5279.710311] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 5279.710321] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0008 [ 5279.710326] [drm:wait_panel_status] Wait complete [ 5279.710334] [drm:wait_panel_on] Wait for panel power on [ 5279.710340] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd000b [ 5279.873281] [drm:wait_panel_status] Wait complete [ 5279.873288] [drm:edp_panel_vdd_off_sync] Turning eDP port C VDD off [ 5279.873302] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0003 [ 5279.873321] [drm:edp_panel_vdd_on] Turning eDP port C VDD on [ 5279.873329] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b [ 5279.901232] [drm:intel_dp_set_signal_levels] Using vswing level 0 [ 5279.901236] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0 [ 5279.902077] [drm:intel_dp_link_training_clock_recovery] clock recovery OK [ 5279.903102] [drm:intel_dp_link_training_channel_equalization] Channel EQ done. DP Training successful [ 5279.903356] [drm:intel_enable_pipe] enabling pipe A [ 5279.903380] [drm:intel_edp_backlight_on] [ 5279.903384] [drm:intel_panel_enable_backlight] pipe A [ 5279.903392] [drm:intel_panel_actually_set_backlight] set backlight PWM = 1562 [ 5279.903403] [drm:intel_psr_enable] PSR not supported by this panel [ 5279.903421] [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511 [ 5279.903436] [drm:vlv_update_wm] Setting FIFO watermarks - A: plane=425, cursor=0, sprite0=0, sprite1=0, SR: plane=0, cursor=0 level=1 cxsr=0 [ 5279.920601] [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511 [ 5279.920617] [drm:vlv_update_wm] Setting FIFO watermarks - A: plane=425, cursor=0, sprite0=0, sprite1=0, SR: plane=1449, cursor=0 level=1 cxsr=1 [ 5279.920623] [drm:intel_set_memory_cxsr] memory self-refresh is enabled [ 5279.920638] [drm:vlv_pipe_set_fifo_size] Pipe B FIFO split 511 / 511 / 511 [ 5279.920650] [drm:vlv_pipe_set_fifo_size] Pipe C FIFO split 511 / 511 / 511 [ 5279.920669] [drm:intel_connector_check_state] [CONNECTOR:47:eDP-1] [ 5279.920678] [drm:intel_connector_check_state] [CONNECTOR:40:DP-1] [ 5279.920686] [drm:intel_connector_check_state] [CONNECTOR:44:HDMI-A-1] [ 5279.920695] [drm:intel_connector_check_state] [CONNECTOR:53:DP-2] [ 5279.920700] [drm:intel_connector_check_state] [CONNECTOR:55:HDMI-A-2] [ 5279.920703] [drm:check_encoder_state] [ENCODER:39:TMDS-39] [ 5279.920711] [drm:check_encoder_state] [ENCODER:43:TMDS-43] [ 5279.920715] [drm:check_encoder_state] [ENCODER:46:TMDS-46] [ 5279.920718] [drm:check_encoder_state] [ENCODER:52:TMDS-52] [ 5279.920721] [drm:check_encoder_state] [ENCODER:54:TMDS-54] [ 5279.920725] [drm:check_crtc_state] [CRTC:26] [ 5279.922959] usb 1-4: reset full-speed USB device number 3 using xhci_hcd [ 5279.932581] [drm:check_crtc_state] [CRTC:31] [ 5279.932588] [drm:check_crtc_state] [CRTC:36] [ 5279.932649] [drm:intel_dp_detect] [CONNECTOR:47:eDP-1] [ 5279.933345] [drm:drm_helper_hpd_irq_event] [CONNECTOR:47:eDP-1] status updated from connected to connected [ 5279.933348] [drm:intel_dp_detect] [CONNECTOR:40:DP-1] [ 5279.933356] [drm:drm_helper_hpd_irq_event] [CONNECTOR:40:DP-1] status updated from disconnected to disconnected [ 5279.933361] [drm:intel_hdmi_detect] [CONNECTOR:44:HDMI-A-1] [ 5280.050878] usb 1-4: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes [ 5280.058626] [drm:intel_hdmi_detect] HDMI live status down [ 5280.058636] [drm:drm_helper_hpd_irq_event] [CONNECTOR:44:HDMI-A-1] status updated from disconnected to disconnected [ 5280.058639] [drm:intel_dp_detect] [CONNECTOR:53:DP-2] [ 5280.058642] [drm:intel_power_well_enable] enabling dpio-common-d [ 5280.076964] [drm:chv_dpio_cmn_power_well_enable] Enabled DPIO PHY1 (PHY_CONTROL=0x150707ff) [ 5280.088812] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064 [ 5280.091284] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064 [ 5280.100947] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064 [ 5280.108770] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064 [ 5280.114458] [drm:intel_power_well_disable] disabling dpio-common-d [ 5280.125762] [drm:chv_dpio_cmn_power_well_disable] Disabled DPIO PHY1 (PHY_CONTROL=0x150707fd) [ 5280.135052] [drm:drm_helper_hpd_irq_event] [CONNECTOR:53:DP-2] status updated from disconnected to disconnected [ 5280.135056] [drm:intel_hdmi_detect] [CONNECTOR:55:HDMI-A-2] [ 5280.135875] [drm:gmbus_xfer] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1) [ 5280.135878] [drm:gmbus_xfer] GMBUS [i915 gmbus panel] NAK on first message, retry [ 5280.136694] [drm:gmbus_xfer] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1) [ 5280.136712] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel [ 5280.136717] [drm:drm_helper_hpd_irq_event] [CONNECTOR:55:HDMI-A-2] status updated from disconnected to disconnected [ 5280.136737] [drm:intel_dp_detect] [CONNECTOR:47:eDP-1] [ 5280.137328] [drm:drm_helper_hpd_irq_event] [CONNECTOR:47:eDP-1] status updated from connected to connected [ 5280.137331] [drm:intel_dp_detect] [CONNECTOR:40:DP-1] [ 5280.137336] [drm:drm_helper_hpd_irq_event] [CONNECTOR:40:DP-1] status updated from disconnected to disconnected [ 5280.137340] [drm:intel_hdmi_detect] [CONNECTOR:44:HDMI-A-1] [ 5280.163096] usb 1-5: reset full-speed USB device number 4 using xhci_hcd [ 5280.262213] [drm:intel_hdmi_detect] HDMI live status down [ 5280.262221] [drm:drm_helper_hpd_irq_event] [CONNECTOR:44:HDMI-A-1] status updated from disconnected to disconnected [ 5280.262224] [drm:intel_dp_detect] [CONNECTOR:53:DP-2] [ 5280.262227] [drm:intel_power_well_enable] enabling dpio-common-d [ 5280.278351] [drm:chv_dpio_cmn_power_well_enable] Enabled DPIO PHY1 (PHY_CONTROL=0x150707ff) [ 5280.288924] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064 [ 5280.291426] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064 [ 5280.300707] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064 [ 5280.308701] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064 [ 5280.314230] [drm:intel_power_well_disable] disabling dpio-common-d [ 5280.322289] [drm:chv_dpio_cmn_power_well_disable] Disabled DPIO PHY1 (PHY_CONTROL=0x150707fd) [ 5280.330348] [drm:drm_helper_hpd_irq_event] [CONNECTOR:53:DP-2] status updated from disconnected to disconnected [ 5280.330352] [drm:intel_hdmi_detect] [CONNECTOR:55:HDMI-A-2] [ 5280.330712] [drm:gmbus_xfer] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1) [ 5280.330713] [drm:gmbus_xfer] GMBUS [i915 gmbus panel] NAK on first message, retry [ 5280.331099] [drm:gmbus_xfer] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1) [ 5280.331101] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel [ 5280.331104] [drm:drm_helper_hpd_irq_event] [CONNECTOR:55:HDMI-A-2] status updated from disconnected to disconnected [ 5280.331583] [drm:intel_didl_outputs] 10 outputs detected [ 5280.446812] PM: resume of devices complete after 1173.202 msecs [ 5280.448762] PM: Finishing wakeup. [ 5280.448766] Restarting tasks ... done. [ 5280.475089] [drm:drm_mode_getconnector] [CONNECTOR:47:?] [ 5280.495799] Bluetooth: hci0: read Intel version: 370810011003110e00 [ 5280.496575] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq [ 5280.500574] [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511 [ 5280.500587] [drm:vlv_update_wm] Setting FIFO watermarks - A: plane=425, cursor=63, sprite0=0, sprite1=0, SR: plane=1449, cursor=0 level=1 cxsr=1 [ 5280.505540] [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511 [ 5280.505554] [drm:vlv_update_wm] Setting FIFO watermarks - A: plane=425, cursor=0, sprite0=0, sprite1=0, SR: plane=1449, cursor=0 level=1 cxsr=1 [ 5280.600408] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 5280.602924] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled [ 5280.603352] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled [ 5280.671310] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled [ 5280.671534] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled [ 5280.685825] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 5280.692955] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready [ 5280.713243] r8169 0000:01:00.0 enp1s0: link down [ 5280.715835] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready [ 5280.827964] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated [ 5280.857143] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 5281.086891] [drm:cherryview_enable_rps] GT fifo had a previous error 1080000 [ 5281.091035] [drm:cherryview_enable_rps] GPLL enabled? yes [ 5281.091045] [drm:cherryview_enable_rps] GPU status: 0x00002010 [ 5281.091050] [drm:cherryview_enable_rps] current GPU freq: 320 MHz (32) [ 5281.091054] [drm:cherryview_enable_rps] setting GPU freq to 320 MHz (32) [ 5283.143830] [drm:edp_panel_vdd_off_sync] Turning eDP port C VDD off [ 5283.143865] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007 [ 5303.622587] [drm:i915_gem_open] [ 5303.720101] [drm:i915_gem_context_create_ioctl] HW context 1 created [ 5303.725072] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 5303.725083] [drm:i915_pages_create_for_stolen] offset=0x428000, size=16384 [ 5303.737629] [drm:i915_gem_context_destroy_ioctl] HW context 1 destroyed [ 5439.623387] wlp2s0: authenticate with 00:26:5a:fc:20:e8 [ 5439.627938] wlp2s0: send auth to 00:26:5a:fc:20:e8 (try 1/3) [ 5439.629907] wlp2s0: authenticated [ 5439.634961] wlp2s0: associate with 00:26:5a:fc:20:e8 (try 1/3) [ 5439.648323] wlp2s0: RX AssocResp from 00:26:5a:fc:20:e8 (capab=0x431 status=0 aid=6) [ 5439.657792] wlp2s0: associated [ 5439.657900] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready [ 5439.935774] iwlwifi 0000:02:00.0: No association and the time event is over already... [ 5439.935811] wlp2s0: Connection to AP 00:26:5a:fc:20:e8 lost [ 5440.804156] wlp2s0: authenticate with 00:26:5a:fc:20:e8 [ 5440.810546] wlp2s0: send auth to 00:26:5a:fc:20:e8 (try 1/3) [ 5440.917653] wlp2s0: send auth to 00:26:5a:fc:20:e8 (try 2/3) [ 5440.929247] wlp2s0: authenticated [ 5440.931477] wlp2s0: associate with 00:26:5a:fc:20:e8 (try 1/3) [ 5440.937219] wlp2s0: RX AssocResp from 00:26:5a:fc:20:e8 (capab=0x431 status=0 aid=1) [ 5440.940053] wlp2s0: associated [ 5441.224711] iwlwifi 0000:02:00.0: No association and the time event is over already... [ 5441.224748] wlp2s0: Connection to AP 00:26:5a:fc:20:e8 lost [ 5442.081807] wlp2s0: authenticate with 00:26:5a:fc:20:e8 [ 5442.086005] wlp2s0: send auth to 00:26:5a:fc:20:e8 (try 1/3) [ 5442.089773] wlp2s0: authenticated [ 5442.095854] wlp2s0: associate with 00:26:5a:fc:20:e8 (try 1/3) [ 5442.143136] wlp2s0: RX AssocResp from 00:26:5a:fc:20:e8 (capab=0x431 status=0 aid=1) [ 5442.147341] wlp2s0: associated [ 5442.394318] iwlwifi 0000:02:00.0: No association and the time event is over already... [ 5442.394436] wlp2s0: Connection to AP 00:26:5a:fc:20:e8 lost [ 5454.229593] wlp2s0: authenticate with 00:26:5a:fc:20:e8 [ 5454.248165] wlp2s0: send auth to 00:26:5a:fc:20:e8 (try 1/3) [ 5454.354021] wlp2s0: send auth to 00:26:5a:fc:20:e8 (try 2/3) [ 5454.420784] wlp2s0: send auth to 00:26:5a:fc:20:e8 (try 3/3) [ 5454.483643] wlp2s0: authentication with 00:26:5a:fc:20:e8 timed out [ 5459.183942] wlp2s0: authenticate with 00:26:5a:fc:20:e8 [ 5459.191476] wlp2s0: send auth to 00:26:5a:fc:20:e8 (try 1/3) [ 5459.297469] wlp2s0: send auth to 00:26:5a:fc:20:e8 (try 2/3) [ 5459.391374] wlp2s0: send auth to 00:26:5a:fc:20:e8 (try 3/3) [ 5459.460772] wlp2s0: authentication with 00:26:5a:fc:20:e8 timed out [ 5478.390742] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 5478.949427] wlp2s0: authenticate with 00:26:5a:fc:20:e8 [ 5478.956257] wlp2s0: send auth to 00:26:5a:fc:20:e8 (try 1/3) [ 5479.035752] wlp2s0: send auth to 00:26:5a:fc:20:e8 (try 2/3) [ 5479.085695] wlp2s0: send auth to 00:26:5a:fc:20:e8 (try 3/3) [ 5479.142624] wlp2s0: authentication with 00:26:5a:fc:20:e8 timed out [ 5503.399314] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 5528.399338] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 5555.100481] wlp2s0: authenticate with 00:26:5a:fc:20:e8 [ 5555.108839] wlp2s0: send auth to 00:26:5a:fc:20:e8 (try 1/3) [ 5555.170086] wlp2s0: send auth to 00:26:5a:fc:20:e8 (try 2/3) [ 5555.234910] wlp2s0: send auth to 00:26:5a:fc:20:e8 (try 3/3) [ 5555.301971] wlp2s0: authentication with 00:26:5a:fc:20:e8 timed out [ 5580.418859] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 6179.954388] wlp2s0: authenticate with 00:26:5a:fc:20:e8 [ 6179.957854] wlp2s0: send auth to 00:26:5a:fc:20:e8 (try 1/3) [ 6180.018193] wlp2s0: authenticated [ 6180.021426] wlp2s0: associate with 00:26:5a:fc:20:e8 (try 1/3) [ 6180.181294] wlp2s0: associate with 00:26:5a:fc:20:e8 (try 2/3) [ 6180.276555] wlp2s0: associate with 00:26:5a:fc:20:e8 (try 3/3) [ 6180.401820] wlp2s0: association with 00:26:5a:fc:20:e8 timed out [ 6208.606173] wlp2s0: authenticate with 00:26:5a:fc:20:e8 [ 6208.609708] wlp2s0: send auth to 00:26:5a:fc:20:e8 (try 1/3) [ 6208.628240] wlp2s0: authenticated [ 6208.630096] wlp2s0: associate with 00:26:5a:fc:20:e8 (try 1/3) [ 6208.762265] wlp2s0: associate with 00:26:5a:fc:20:e8 (try 2/3) [ 6208.867454] wlp2s0: associate with 00:26:5a:fc:20:e8 (try 3/3) [ 6208.977739] wlp2s0: association with 00:26:5a:fc:20:e8 timed out [ 6254.713398] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 6258.465697] wlp2s0: authenticate with 00:26:5a:fc:20:e8 [ 6258.469227] wlp2s0: send auth to 00:26:5a:fc:20:e8 (try 1/3) [ 6258.546245] wlp2s0: send auth to 00:26:5a:fc:20:e8 (try 2/3) [ 6258.626404] wlp2s0: send auth to 00:26:5a:fc:20:e8 (try 3/3) [ 6258.680755] wlp2s0: authentication with 00:26:5a:fc:20:e8 timed out [ 6283.729266] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 6308.751528] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 6411.579458] wlp2s0: authenticate with 00:26:5a:fc:20:e8 [ 6411.583325] wlp2s0: send auth to 00:26:5a:fc:20:e8 (try 1/3) [ 6411.687067] wlp2s0: send auth to 00:26:5a:fc:20:e8 (try 2/3) [ 6411.762067] wlp2s0: send auth to 00:26:5a:fc:20:e8 (try 3/3) [ 6411.834525] wlp2s0: authentication with 00:26:5a:fc:20:e8 timed out [ 6436.787466] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 6761.930547] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 6765.225525] wlp2s0: authenticate with 00:26:5a:fc:20:e8 [ 6765.233064] wlp2s0: send auth to 00:26:5a:fc:20:e8 (try 1/3) [ 6765.387345] wlp2s0: send auth to 00:26:5a:fc:20:e8 (try 2/3) [ 6765.499522] wlp2s0: send auth to 00:26:5a:fc:20:e8 (try 3/3) [ 6765.621029] wlp2s0: authentication with 00:26:5a:fc:20:e8 timed out [ 6790.944675] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 6815.943189] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 6918.747991] wlp2s0: authenticate with 00:26:5a:fc:20:e8 [ 6918.754497] wlp2s0: send auth to 00:26:5a:fc:20:e8 (try 1/3) [ 6918.815612] wlp2s0: send auth to 00:26:5a:fc:20:e8 (try 2/3) [ 6918.894683] wlp2s0: send auth to 00:26:5a:fc:20:e8 (try 3/3) [ 6918.961909] wlp2s0: authentication with 00:26:5a:fc:20:e8 timed out [ 6943.998865] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 7477.933916] wlp2s0: authenticate with 00:26:5a:fc:20:e8 [ 7477.937633] wlp2s0: send auth to 00:26:5a:fc:20:e8 (try 1/3) [ 7478.021382] wlp2s0: send auth to 00:26:5a:fc:20:e8 (try 2/3) [ 7478.099724] wlp2s0: send auth to 00:26:5a:fc:20:e8 (try 3/3) [ 7478.161944] wlp2s0: authentication with 00:26:5a:fc:20:e8 timed out [ 7503.252061] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 7528.266151] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 7554.924182] wlp2s0: authenticate with 00:26:5a:fc:20:e8 [ 7554.931732] wlp2s0: send auth to 00:26:5a:fc:20:e8 (try 1/3) [ 7554.992671] wlp2s0: send auth to 00:26:5a:fc:20:e8 (try 2/3) [ 7555.128691] wlp2s0: send auth to 00:26:5a:fc:20:e8 (try 3/3) [ 7555.194775] wlp2s0: authentication with 00:26:5a:fc:20:e8 timed out [ 7580.278176] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 7580.837976] wlp2s0: authenticate with 00:26:5a:fc:20:e8 [ 7580.844021] wlp2s0: send auth to 00:26:5a:fc:20:e8 (try 1/3) [ 7580.902526] wlp2s0: send auth to 00:26:5a:fc:20:e8 (try 2/3) [ 7580.965148] wlp2s0: send auth to 00:26:5a:fc:20:e8 (try 3/3) [ 7581.016389] wlp2s0: authentication with 00:26:5a:fc:20:e8 timed out [ 7605.285614] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 8202.266109] wlp2s0: authenticate with 00:26:5a:fc:20:e8 [ 8202.268632] wlp2s0: send auth to 00:26:5a:fc:20:e8 (try 1/3) [ 8202.337953] wlp2s0: send auth to 00:26:5a:fc:20:e8 (try 2/3) [ 8202.406652] wlp2s0: send auth to 00:26:5a:fc:20:e8 (try 3/3) [ 8202.515266] wlp2s0: authentication with 00:26:5a:fc:20:e8 timed out [ 8227.552763] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 8252.565504] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 8253.230976] wlp2s0: authenticate with 00:26:5a:fc:20:e8 [ 8253.239508] wlp2s0: send auth to 00:26:5a:fc:20:e8 (try 1/3) [ 8253.294309] wlp2s0: send auth to 00:26:5a:fc:20:e8 (try 2/3) [ 8253.349818] wlp2s0: send auth to 00:26:5a:fc:20:e8 (try 3/3) [ 8253.434486] wlp2s0: authentication with 00:26:5a:fc:20:e8 timed out [ 8278.578911] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 8279.122501] wlp2s0: authenticate with 00:26:5a:fc:20:e8 [ 8279.125189] wlp2s0: send auth to 00:26:5a:fc:20:e8 (try 1/3) [ 8279.180722] wlp2s0: send auth to 00:26:5a:fc:20:e8 (try 2/3) [ 8279.242863] wlp2s0: send auth to 00:26:5a:fc:20:e8 (try 3/3) [ 8279.306289] wlp2s0: authentication with 00:26:5a:fc:20:e8 timed out [ 8303.584849] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 8366.002464] intel-vbtn INT33D6:00: unknown event index 0xcd [ 8366.008205] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 8366.008746] [drm:drm_mode_getconnector] [CONNECTOR:47:?] [ 8366.008760] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:47:eDP-1] [ 8366.008765] [drm:intel_dp_detect] [CONNECTOR:47:eDP-1] [ 8366.008783] [drm:edp_panel_vdd_on] Turning eDP port C VDD on [ 8366.008797] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f [ 8366.009186] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 8366.009427] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 8366.009567] acpi device:17: Cannot transition to power state D3hot for parent in (unknown) [ 8366.009714] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 8366.009757] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 8366.009961] pci_bus 0000:01: Allocating resources [ 8366.009998] pci_bus 0000:02: Allocating resources [ 8366.010041] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 8366.010091] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 8366.010406] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 8366.010573] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 8366.020262] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 8366.020302] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:47:eDP-1] probed modes : [ 8366.020308] [drm:drm_mode_debug_printmodeline] Modeline 48:"1366x768" 60 75610 1366 1406 1438 1574 768 771 777 800 0x48 0xa [ 8366.020339] [drm:drm_mode_getconnector] [CONNECTOR:47:?] [ 8366.020694] [drm:drm_mode_getconnector] [CONNECTOR:40:?] [ 8366.020699] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:40:DP-1] [ 8366.020702] [drm:intel_dp_detect] [CONNECTOR:40:DP-1] [ 8366.020709] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:40:DP-1] disconnected [ 8366.020716] [drm:drm_mode_getconnector] [CONNECTOR:53:?] [ 8366.020720] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:53:DP-2] [ 8366.020722] [drm:intel_dp_detect] [CONNECTOR:53:DP-2] [ 8366.020726] [drm:intel_power_well_enable] enabling dpio-common-d [ 8366.037023] [drm:chv_dpio_cmn_power_well_enable] Enabled DPIO PHY1 (PHY_CONTROL=0x150707ff) [ 8366.052375] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064 [ 8366.054926] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064 [ 8366.063739] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064 [ 8366.071720] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064 [ 8366.077558] [drm:intel_power_well_disable] disabling dpio-common-d [ 8366.085309] [drm:chv_dpio_cmn_power_well_disable] Disabled DPIO PHY1 (PHY_CONTROL=0x150707fd) [ 8366.096166] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:53:DP-2] disconnected [ 8366.096215] [drm:drm_mode_getconnector] [CONNECTOR:44:?] [ 8366.096220] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:44:HDMI-A-1] [ 8366.096224] [drm:intel_hdmi_detect] [CONNECTOR:44:HDMI-A-1] [ 8366.221650] [drm:intel_hdmi_detect] HDMI live status down [ 8366.221665] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:44:HDMI-A-1] disconnected [ 8366.221712] [drm:drm_mode_getconnector] [CONNECTOR:55:?] [ 8366.221720] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:55:HDMI-A-2] [ 8366.221724] [drm:intel_hdmi_detect] [CONNECTOR:55:HDMI-A-2] [ 8366.222542] [drm:gmbus_xfer] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1) [ 8366.222563] [drm:gmbus_xfer] GMBUS [i915 gmbus panel] NAK on first message, retry [ 8366.223335] [drm:gmbus_xfer] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1) [ 8366.223347] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel [ 8366.223354] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:55:HDMI-A-2] disconnected [ 8366.241730] [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511 [ 8366.241746] [drm:vlv_update_wm] Setting FIFO watermarks - A: plane=425, cursor=63, sprite0=0, sprite1=0, SR: plane=1449, cursor=0 level=1 cxsr=1 [ 8366.242278] [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511 [ 8366.242291] [drm:vlv_update_wm] Setting FIFO watermarks - A: plane=425, cursor=0, sprite0=0, sprite1=0, SR: plane=1449, cursor=0 level=1 cxsr=1 [ 8366.243171] [drm:drm_mode_getconnector] [CONNECTOR:47:?] [ 8366.277092] [drm:connected_sink_compute_bpp] [CONNECTOR:47:eDP-1] checking for sink bpp constrains [ 8366.277102] [drm:connected_sink_compute_bpp] clamping display bpp (was 30) to EDID reported max of 18 [ 8366.277113] [drm:intel_dp_compute_config] DP link computation with max lane count 1 max bw 270000 pixel clock 75610KHz [ 8366.277118] [drm:intel_dp_compute_config] DP link bw 0a rate select 00 lane count 1 clock 270000 bpp 18 [ 8366.277120] [drm:intel_dp_compute_config] DP link bw required 136098 available 216000 [ 8366.277126] [drm:intel_modeset_pipe_config] hw max bpp: 30, pipe bpp: 18, dithering: 1 [ 8366.277131] [drm:intel_dump_pipe_config] [CRTC:26][modeset] config ffff880053801000 for pipe A [ 8366.277133] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 8366.277136] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1 [ 8366.277139] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 8366.277143] [drm:intel_dump_pipe_config] dp: 1, lanes: 1, gmch_m: 2642761, gmch_n: 4194304, link_m: 146820, link_n: 524288, tu: 64 [ 8366.277146] [drm:intel_dump_pipe_config] dp: 1, lanes: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 8366.277148] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 8366.277150] [drm:intel_dump_pipe_config] requested mode: [ 8366.277156] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 75610 1366 1406 1438 1574 768 771 777 800 0x0 0xa [ 8366.277158] [drm:intel_dump_pipe_config] adjusted mode: [ 8366.277162] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 75610 1366 1406 1438 1574 768 771 777 800 0x48 0xa [ 8366.277166] [drm:intel_dump_crtc_timings] crtc timings: 75610 1366 1406 1438 1574 768 771 777 800, type: 0x48 flags: 0xa [ 8366.277168] [drm:intel_dump_pipe_config] port clock: 270000 [ 8366.277170] [drm:intel_dump_pipe_config] pipe src size: 1366x768 [ 8366.277173] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0 [ 8366.277176] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 8366.277178] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 8366.277181] [drm:intel_dump_pipe_config] ips: 0 [ 8366.277183] [drm:intel_dump_pipe_config] double wide: 0 [ 8366.277186] [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0xb0002000, dpll_md: 0x0, fp0: 0x0, fp1: 0x0 [ 8366.277188] [drm:intel_dump_pipe_config] planes on this crtc [ 8366.277192] [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 0.0 idx: 0 enabled [ 8366.277196] [drm:intel_dump_pipe_config] FB:64, fb = 1366x768 format = 0x34325258 [ 8366.277200] [drm:intel_dump_pipe_config] scaler:0 src (0, 0) 1366x768 dst (0, 0) 1366x768 [ 8366.277203] [drm:intel_dump_pipe_config] CURSOR PLANE:25 plane: 0.1 idx: 1 enabled [ 8366.277205] [drm:intel_dump_pipe_config] FB:56, fb = 64x64 format = 0x34325241 [ 8366.277209] [drm:intel_dump_pipe_config] scaler:0 src (0, 0) 64x64 dst (919, 9) 64x64 [ 8366.277213] [drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 0.1 idx: 2 disabled, scaler_id = 0 [ 8366.277217] [drm:intel_dump_pipe_config] STANDARD PLANE:28 plane: 0.2 idx: 3 disabled, scaler_id = 0 [ 8366.277258] [drm:intel_set_memory_cxsr] memory self-refresh is disabled [ 8366.282420] [drm:intel_set_memory_cxsr] memory self-refresh is disabled [ 8366.299090] [drm:intel_edp_backlight_off] [ 8366.501778] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0 [ 8366.502047] [drm:edp_panel_off] Turn eDP port C panel power off [ 8366.502055] [drm:wait_panel_off] Wait for panel power off time [ 8366.502063] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control abcd0000 [ 8366.542008] [drm:intel_get_hpd_pins] hotplug event received, stat 0x00100000, dig 0x00100000, pins 0x00000040 [ 8366.542023] [drm:intel_hpd_irq_handler] digital hpd port C - long [ 8366.542032] [drm:intel_hpd_irq_storm_detect] Received HPD interrupt on PIN 6 - cnt: 0 [ 8366.542112] [drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port C [ 8366.542621] [drm:wait_panel_status] Wait complete [ 8366.542648] [drm:intel_disable_pipe] disabling pipe A [ 8366.549493] [drm:intel_dp_link_down] [ 8366.624331] [drm:chv_phy_powergate_lanes] Power gating DPIO PHY0 CH1 lanes 0x0 (PHY_CONTROL=0x050007fd) [ 8366.635516] [drm:intel_power_well_disable] disabling dpio-common-bc [ 8366.644978] [drm:chv_dpio_cmn_power_well_disable] Disabled DPIO PHY0 (PHY_CONTROL=0x050007fc) [ 8366.654318] [drm:intel_power_well_disable] disabling display [ 8366.663669] [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511 [ 8366.663688] [drm:vlv_update_wm] Setting FIFO watermarks - A: plane=0, cursor=0, sprite0=0, sprite1=0, SR: plane=0, cursor=0 level=1 cxsr=0 [ 8366.663707] [drm:intel_connector_check_state] [CONNECTOR:47:eDP-1] [ 8366.663714] [drm:check_encoder_state] [ENCODER:39:TMDS-39] [ 8366.663721] [drm:check_encoder_state] [ENCODER:43:TMDS-43] [ 8366.663727] [drm:check_encoder_state] [ENCODER:46:TMDS-46] [ 8366.663732] [drm:check_encoder_state] [ENCODER:52:TMDS-52] [ 8366.663737] [drm:check_encoder_state] [ENCODER:54:TMDS-54] [ 8366.663742] [drm:check_crtc_state] [CRTC:26] [ 8367.521351] PM: Syncing filesystems ... done. [ 8367.546596] PM: Preparing system for sleep (mem) [ 8367.548210] Freezing user space processes ... (elapsed 0.004 seconds) done. [ 8367.552790] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 8367.554568] PM: Suspending system (mem) [ 8367.554593] Suspending console(s) (use no_console_suspend to debug) [ 8367.609209] [drm:intel_power_well_enable] enabling always-on [ 8367.609212] [drm:intel_power_well_enable] enabling display [ 8367.617391] [drm:i915_redisable_vga_power_on] Something enabled VGA plane, disabling it [ 8367.617698] [drm:intel_power_well_enable] enabling dpio-common-bc [ 8367.617716] [drm:intel_dp_detect] [CONNECTOR:47:eDP-1] [ 8367.633807] [drm:chv_dpio_cmn_power_well_enable] Enabled DPIO PHY0 (PHY_CONTROL=0x050007fd) [ 8367.641863] [drm:intel_power_well_enable] enabling dpio-common-d [ 8367.657978] [drm:chv_dpio_cmn_power_well_enable] Enabled DPIO PHY1 (PHY_CONTROL=0x050007ff) [ 8367.666256] [drm:edp_panel_vdd_on] Turning eDP port C VDD on [ 8367.666258] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 8367.666261] [drm:vlv_power_sequencer_pipe] picked pipe A power sequencer for port C [ 8367.666267] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x87d00001, PP_OFF 0x1f40001, PP_DIV 0x270f06 [ 8367.666269] [drm:vlv_power_sequencer_kick] kicking pipe A power sequencer for port C [ 8367.666273] [drm:chv_phy_powergate_ch] Power gating DPIO PHY0 CH0 (DPIO_PHY_CONTROL=0x0d0007ff) [ 8367.710117] [drm:chv_phy_powergate_ch] Power gating DPIO PHY0 CH0 (DPIO_PHY_CONTROL=0x050007ff) [ 8367.718167] [drm:wait_panel_status] mask b800000f value 00000000 status 08000001 control 00000000 [ 8368.100238] [drm:wait_panel_status] Wait complete [ 8368.100249] [drm:edp_panel_vdd_on] PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0008 [ 8368.100252] [drm:edp_panel_vdd_on] eDP port C panel power wasn't enabled [ 8368.182730] [drm:intel_get_hpd_pins] hotplug event received, stat 0x00100000, dig 0x00100000, pins 0x00000040 [ 8368.182741] [drm:intel_hpd_irq_handler] digital hpd port C - long [ 8368.182748] [drm:intel_hpd_irq_storm_detect] Received HPD interrupt on PIN 6 - cnt: 0 [ 8368.182810] [drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port C [ 8368.303258] [drm:drm_helper_hpd_irq_event] [CONNECTOR:47:eDP-1] status updated from connected to connected [ 8368.303265] [drm:intel_dp_detect] [CONNECTOR:40:DP-1] [ 8368.303274] [drm:drm_helper_hpd_irq_event] [CONNECTOR:40:DP-1] status updated from disconnected to disconnected [ 8368.303279] [drm:intel_hdmi_detect] [CONNECTOR:44:HDMI-A-1] [ 8368.430579] [drm:intel_hdmi_detect] HDMI live status down [ 8368.430589] [drm:drm_helper_hpd_irq_event] [CONNECTOR:44:HDMI-A-1] status updated from disconnected to disconnected [ 8368.430592] [drm:intel_dp_detect] [CONNECTOR:53:DP-2] [ 8368.433093] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064 [ 8368.435577] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064 [ 8368.444805] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064 [ 8368.452803] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064 [ 8368.458338] [drm:drm_helper_hpd_irq_event] [CONNECTOR:53:DP-2] status updated from disconnected to disconnected [ 8368.458341] [drm:intel_hdmi_detect] [CONNECTOR:55:HDMI-A-2] [ 8368.458558] [drm:gmbus_xfer] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1) [ 8368.458560] [drm:gmbus_xfer] GMBUS [i915 gmbus panel] NAK on first message, retry [ 8368.458862] [drm:gmbus_xfer] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1) [ 8368.458869] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel [ 8368.458875] [drm:drm_helper_hpd_irq_event] [CONNECTOR:55:HDMI-A-2] status updated from disconnected to disconnected [ 8368.458962] [drm:edp_panel_vdd_off_sync] Turning eDP port C VDD off [ 8368.458971] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0000 [ 8368.515203] [drm:intel_power_well_disable] disabling dpio-common-d [ 8368.524238] [drm:chv_dpio_cmn_power_well_disable] Disabled DPIO PHY1 (PHY_CONTROL=0x050007fd) [ 8368.533580] [drm:intel_power_well_disable] disabling dpio-common-bc [ 8368.542894] [drm:chv_dpio_cmn_power_well_disable] Disabled DPIO PHY0 (PHY_CONTROL=0x050007fc) [ 8368.549808] [drm:intel_power_well_disable] disabling display [ 8368.559199] [drm:intel_power_well_disable] disabling always-on [ 8368.559569] PM: suspend of devices complete after 1004.155 msecs [ 8368.579116] PM: late suspend of devices complete after 19.515 msecs [ 8368.580667] r8169 0000:01:00.0: System wakeup enabled by ACPI [ 8368.581786] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [ 8368.595804] PM: noirq suspend of devices complete after 16.671 msecs [ 8368.595885] ACPI: Preparing to enter system sleep state S3 [ 8368.662690] ACPI : EC: EC stopped [ 8368.662691] PM: Saving platform NVS memory [ 8368.662789] Disabling non-boot CPUs ... [ 8368.663472] Broke affinity for irq 1 [ 8368.663492] Broke affinity for irq 9 [ 8368.663508] Broke affinity for irq 34 [ 8368.663518] Broke affinity for irq 37 [ 8368.663569] Broke affinity for irq 115 [ 8368.663730] Broke affinity for irq 311 [ 8368.663755] Broke affinity for irq 315 [ 8368.664935] smpboot: CPU 1 is now offline [ 8368.676023] ACPI: Low-level resume complete [ 8368.676128] ACPI : EC: EC started [ 8368.676129] PM: Restoring platform NVS memory [ 8368.676912] Enabling non-boot CPUs ... [ 8368.696359] x86: Booting SMP configuration: [ 8368.696362] smpboot: Booting Node 0 Processor 1 APIC 0x4 [ 8368.704408] cache: parent cpu1 should not be sleeping [ 8368.704807] CPU1 is up [ 8368.705621] ACPI: Waking up from system sleep state S3 [ 8368.824560] intel-vbtn INT33D6:00: unknown event index 0xcd [ 8369.037513] acpi LNXPOWER:03: Turning OFF [ 8369.037634] acpi LNXPOWER:02: Turning OFF [ 8369.040182] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [ 8369.053104] PM: noirq resume of devices complete after 15.305 msecs [ 8369.065090] [drm:chv_phy_control_init] Initial PHY_CONTROL=0x050007fc [ 8369.065101] [drm:intel_power_well_enable] enabling always-on [ 8369.065106] [drm:intel_power_well_enable] enabling display [ 8369.067403] [drm:intel_power_well_enable] enabling dpio-common-bc [ 8369.086042] [drm:chv_dpio_cmn_power_well_enable] Enabled DPIO PHY0 (PHY_CONTROL=0x050007fd) [ 8369.095364] [drm:intel_power_well_enable] enabling dpio-common-d [ 8369.113912] [drm:chv_dpio_cmn_power_well_enable] Enabled DPIO PHY1 (PHY_CONTROL=0x050007ff) [ 8370.067996] PM: early resume of devices complete after 1014.286 msecs [ 8370.070638] r8169 0000:01:00.0: System wakeup disabled by ACPI [ 8370.079650] rtc_cmos 00:04: System wakeup disabled by ACPI [ 8370.122237] xhci_hcd 0000:00:14.0: port 4 resume PLC timeout [ 8370.137416] [drm:i915_redisable_vga_power_on] Something enabled VGA plane, disabling it [ 8370.137731] [drm:intel_opregion_setup] graphic opregion physical addr: 0x76677000 [ 8370.137776] [drm:intel_opregion_setup] Public ACPI methods supported [ 8370.137777] [drm:intel_opregion_setup] ASLE supported [ 8370.137795] [drm:vlv_initial_power_sequencer_setup] no initial power sequencer for port C [ 8370.137855] [drm:gen8_init_common_ring] Execlists enabled for render ring [ 8370.137862] [drm:gen8_init_common_ring] Execlists enabled for bsd ring [ 8370.137867] [drm:gen8_init_common_ring] Execlists enabled for blitter ring [ 8370.137873] [drm:gen8_init_common_ring] Execlists enabled for video enhancement ring [ 8370.140418] [drm:intel_update_cdclk] Current CD clock rate: 266667 kHz [ 8370.140474] [drm:intel_modeset_readout_hw_state] [CRTC:26] hw state readout: disabled [ 8370.140541] [drm:intel_modeset_readout_hw_state] [CRTC:31] hw state readout: disabled [ 8370.140546] [drm:intel_modeset_readout_hw_state] [CRTC:36] hw state readout: disabled [ 8370.140556] [drm:intel_modeset_readout_hw_state] [ENCODER:39:TMDS-39] hw state readout: disabled, pipe A [ 8370.140560] [drm:intel_modeset_readout_hw_state] [ENCODER:43:TMDS-43] hw state readout: disabled, pipe A [ 8370.140562] [drm:intel_modeset_readout_hw_state] [ENCODER:46:TMDS-46] hw state readout: disabled, pipe A [ 8370.140565] [drm:intel_modeset_readout_hw_state] [ENCODER:52:TMDS-52] hw state readout: disabled, pipe A [ 8370.140569] [drm:intel_modeset_readout_hw_state] [ENCODER:54:TMDS-54] hw state readout: disabled, pipe A [ 8370.140571] [drm:intel_modeset_readout_hw_state] [CONNECTOR:47:eDP-1] hw state readout: disabled [ 8370.140573] [drm:intel_modeset_readout_hw_state] [CONNECTOR:40:DP-1] hw state readout: disabled [ 8370.140576] [drm:intel_modeset_readout_hw_state] [CONNECTOR:44:HDMI-A-1] hw state readout: disabled [ 8370.140578] [drm:intel_modeset_readout_hw_state] [CONNECTOR:53:DP-2] hw state readout: disabled [ 8370.140581] [drm:intel_modeset_readout_hw_state] [CONNECTOR:55:HDMI-A-2] hw state readout: disabled [ 8370.140588] [drm:intel_dump_pipe_config] [CRTC:26][setup_hw_state] config ffff880053801000 for pipe A [ 8370.140589] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 8370.140590] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 8370.140592] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 8370.140594] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 8370.140596] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 8370.140597] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 8370.140598] [drm:intel_dump_pipe_config] requested mode: [ 8370.140601] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 8370.140602] [drm:intel_dump_pipe_config] adjusted mode: [ 8370.140605] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 8370.140607] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 8370.140608] [drm:intel_dump_pipe_config] port clock: 0 [ 8370.140609] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 8370.140611] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0 [ 8370.140613] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 8370.140614] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 8370.140615] [drm:intel_dump_pipe_config] ips: 0 [ 8370.140616] [drm:intel_dump_pipe_config] double wide: 0 [ 8370.140618] [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0x0, dpll_md: 0x0, fp0: 0x0, fp1: 0x0 [ 8370.140619] [drm:intel_dump_pipe_config] planes on this crtc [ 8370.140623] [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 0.0 idx: 0 enabled [ 8370.140625] [drm:intel_dump_pipe_config] FB:64, fb = 1366x768 format = 0x34325258 [ 8370.140625] [drm:intel_dump_pipe_config] scaler:0 src (0, 0) 0x0 dst (0, 0) 0x0 [ 8370.140629] [drm:intel_dump_pipe_config] CURSOR PLANE:25 plane: 0.1 idx: 1 enabled [ 8370.140632] [drm:intel_dump_pipe_config] FB:56, fb = 64x64 format = 0x34325241 [ 8370.140632] [drm:intel_dump_pipe_config] scaler:0 src (0, 0) 4294966377x4294967287 dst (919, 9) 4294966377x4294967287 [ 8370.140634] [drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 0.1 idx: 2 disabled, scaler_id = 0 [ 8370.140635] [drm:intel_dump_pipe_config] STANDARD PLANE:28 plane: 0.2 idx: 3 disabled, scaler_id = 0 [ 8370.140639] [drm:intel_dump_pipe_config] [CRTC:31][setup_hw_state] config ffff880053800c00 for pipe B [ 8370.140640] [drm:intel_dump_pipe_config] cpu_transcoder: B [ 8370.140641] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 8370.140643] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 8370.140645] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 8370.140647] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 8370.140648] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 8370.140649] [drm:intel_dump_pipe_config] requested mode: [ 8370.140651] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 8370.140652] [drm:intel_dump_pipe_config] adjusted mode: [ 8370.140655] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 8370.140657] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 8370.140658] [drm:intel_dump_pipe_config] port clock: 0 [ 8370.140659] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 8370.140661] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0 [ 8370.140662] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 8370.140664] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 8370.140665] [drm:intel_dump_pipe_config] ips: 0 [ 8370.140666] [drm:intel_dump_pipe_config] double wide: 0 [ 8370.140667] [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0x0, dpll_md: 0x0, fp0: 0x0, fp1: 0x0 [ 8370.140668] [drm:intel_dump_pipe_config] planes on this crtc [ 8370.140670] [drm:intel_dump_pipe_config] STANDARD PLANE:29 plane: 1.0 idx: 4 disabled, scaler_id = 0 [ 8370.140672] [drm:intel_dump_pipe_config] CURSOR PLANE:30 plane: 1.2 idx: 5 disabled, scaler_id = 0 [ 8370.140673] [drm:intel_dump_pipe_config] STANDARD PLANE:32 plane: 1.1 idx: 6 disabled, scaler_id = 0 [ 8370.140675] [drm:intel_dump_pipe_config] STANDARD PLANE:33 plane: 1.2 idx: 7 disabled, scaler_id = 0 [ 8370.140679] [drm:intel_dump_pipe_config] [CRTC:36][setup_hw_state] config ffff880072472400 for pipe C [ 8370.140680] [drm:intel_dump_pipe_config] cpu_transcoder: C [ 8370.140681] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 8370.140683] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 8370.140685] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 8370.140687] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 8370.140688] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 8370.140689] [drm:intel_dump_pipe_config] requested mode: [ 8370.140691] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 8370.140692] [drm:intel_dump_pipe_config] adjusted mode: [ 8370.140695] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 8370.140697] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 8370.140698] [drm:intel_dump_pipe_config] port clock: 0 [ 8370.140699] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 8370.140701] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0 [ 8370.140702] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 8370.140703] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 8370.140704] [drm:intel_dump_pipe_config] ips: 0 [ 8370.140705] [drm:intel_dump_pipe_config] double wide: 0 [ 8370.140707] [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0x0, dpll_md: 0x0, fp0: 0x0, fp1: 0x0 [ 8370.140708] [drm:intel_dump_pipe_config] planes on this crtc [ 8370.140710] [drm:intel_dump_pipe_config] STANDARD PLANE:34 plane: 2.0 idx: 8 disabled, scaler_id = 0 [ 8370.140711] [drm:intel_dump_pipe_config] CURSOR PLANE:35 plane: 2.3 idx: 9 disabled, scaler_id = 0 [ 8370.140713] [drm:intel_dump_pipe_config] STANDARD PLANE:37 plane: 2.1 idx: 10 disabled, scaler_id = 0 [ 8370.140715] [drm:intel_dump_pipe_config] STANDARD PLANE:38 plane: 2.2 idx: 11 disabled, scaler_id = 0 [ 8370.140729] [drm:vlv_get_fifo_size] Pipe A primary A FIFO size: 256 [ 8370.140732] [drm:vlv_get_fifo_size] Pipe A sprite A FIFO size: 128 [ 8370.140736] [drm:vlv_get_fifo_size] Pipe A sprite B FIFO size: 127 [ 8370.140739] [drm:vlv_get_fifo_size] Pipe B primary B FIFO size: 256 [ 8370.140743] [drm:vlv_get_fifo_size] Pipe B sprite C FIFO size: 128 [ 8370.140745] [drm:vlv_get_fifo_size] Pipe B sprite D FIFO size: 127 [ 8370.140750] [drm:vlv_get_fifo_size] Pipe C primary C FIFO size: 256 [ 8370.140752] [drm:vlv_get_fifo_size] Pipe C sprite E FIFO size: 128 [ 8370.140756] [drm:vlv_get_fifo_size] Pipe C sprite F FIFO size: 127 [ 8370.141790] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout [ 8370.144765] r8169 0000:01:00.0 enp1s0: link down [ 8370.161914] [drm:vlv_wm_get_hw_state] Punit not acking DDR DVFS request, assuming DDR DVFS is disabled [ 8370.161931] [drm:vlv_wm_get_hw_state] Initial watermarks: pipe A, plane=15, cursor=15, sprite0=15, sprite1=15 [ 8370.161939] [drm:vlv_wm_get_hw_state] Initial watermarks: pipe B, plane=15, cursor=15, sprite0=15, sprite1=15 [ 8370.161946] [drm:vlv_wm_get_hw_state] Initial watermarks: pipe C, plane=15, cursor=15, sprite0=15, sprite1=15 [ 8370.161954] [drm:vlv_wm_get_hw_state] Initial watermarks: SR plane=127, SR cursor=0 level=0 cxsr=0 [ 8370.161971] [drm:intel_power_well_disable] disabling dpio-common-d [ 8370.170994] [drm:chv_dpio_cmn_power_well_disable] Disabled DPIO PHY1 (PHY_CONTROL=0x050007fd) [ 8370.180149] [drm:intel_power_well_disable] disabling dpio-common-bc [ 8370.189093] [drm:chv_dpio_cmn_power_well_disable] Disabled DPIO PHY0 (PHY_CONTROL=0x050007fc) [ 8370.198410] [drm:intel_power_well_disable] disabling always-on [ 8370.198442] [drm:connected_sink_compute_bpp] [CONNECTOR:47:eDP-1] checking for sink bpp constrains [ 8370.198444] [drm:connected_sink_compute_bpp] clamping display bpp (was 30) to EDID reported max of 18 [ 8370.198451] [drm:intel_dp_compute_config] DP link computation with max lane count 1 max bw 270000 pixel clock 75610KHz [ 8370.198456] [drm:intel_dp_compute_config] DP link bw 0a rate select 00 lane count 1 clock 270000 bpp 18 [ 8370.198457] [drm:intel_dp_compute_config] DP link bw required 136098 available 216000 [ 8370.198461] [drm:intel_modeset_pipe_config] hw max bpp: 30, pipe bpp: 18, dithering: 1 [ 8370.198465] [drm:intel_dump_pipe_config] [CRTC:26][modeset] config ffff88003582b000 for pipe A [ 8370.198467] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 8370.198468] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1 [ 8370.198471] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 8370.198474] [drm:intel_dump_pipe_config] dp: 1, lanes: 1, gmch_m: 2642761, gmch_n: 4194304, link_m: 146820, link_n: 524288, tu: 64 [ 8370.198477] [drm:intel_dump_pipe_config] dp: 1, lanes: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 8370.198479] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 8370.198480] [drm:intel_dump_pipe_config] requested mode: [ 8370.198486] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 75610 1366 1406 1438 1574 768 771 777 800 0x0 0xa [ 8370.198488] [drm:intel_dump_pipe_config] adjusted mode: [ 8370.198492] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 75610 1366 1406 1438 1574 768 771 777 800 0x48 0xa [ 8370.198496] [drm:intel_dump_crtc_timings] crtc timings: 75610 1366 1406 1438 1574 768 771 777 800, type: 0x48 flags: 0xa [ 8370.198497] [drm:intel_dump_pipe_config] port clock: 270000 [ 8370.198499] [drm:intel_dump_pipe_config] pipe src size: 1366x768 [ 8370.198501] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0 [ 8370.198503] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 8370.198505] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 8370.198506] [drm:intel_dump_pipe_config] ips: 0 [ 8370.198508] [drm:intel_dump_pipe_config] double wide: 0 [ 8370.198510] [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0xb0002000, dpll_md: 0x0, fp0: 0x0, fp1: 0x0 [ 8370.198512] [drm:intel_dump_pipe_config] planes on this crtc [ 8370.198521] [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 0.0 idx: 0 enabled [ 8370.198525] [drm:intel_dump_pipe_config] FB:64, fb = 1366x768 format = 0x34325258 [ 8370.198525] [drm:intel_dump_pipe_config] scaler:0 src (0, 0) 0x0 dst (0, 0) 0x0 [ 8370.198531] [drm:intel_dump_pipe_config] CURSOR PLANE:25 plane: 0.1 idx: 1 enabled [ 8370.198536] [drm:intel_dump_pipe_config] FB:56, fb = 64x64 format = 0x34325241 [ 8370.198536] [drm:intel_dump_pipe_config] scaler:0 src (0, 0) 4294966377x4294967287 dst (919, 9) 4294966377x4294967287 [ 8370.198540] [drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 0.1 idx: 2 disabled, scaler_id = 0 [ 8370.198544] [drm:intel_dump_pipe_config] STANDARD PLANE:28 plane: 0.2 idx: 3 disabled, scaler_id = 0 [ 8370.198583] [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511 [ 8370.198593] [drm:vlv_update_wm] Setting FIFO watermarks - A: plane=0, cursor=0, sprite0=0, sprite1=0, SR: plane=0, cursor=0 level=1 cxsr=0 [ 8370.203276] [drm:vlv_pipe_set_fifo_size] Pipe B FIFO split 511 / 511 / 511 [ 8370.203286] [drm:vlv_pipe_set_fifo_size] Pipe C FIFO split 511 / 511 / 511 [ 8370.203303] [drm:intel_connector_check_state] [CONNECTOR:47:eDP-1] [ 8370.203308] [drm:intel_connector_check_state] [CONNECTOR:40:DP-1] [ 8370.203311] [drm:intel_connector_check_state] [CONNECTOR:44:HDMI-A-1] [ 8370.203314] [drm:intel_connector_check_state] [CONNECTOR:53:DP-2] [ 8370.203316] [drm:intel_connector_check_state] [CONNECTOR:55:HDMI-A-2] [ 8370.203319] [drm:check_encoder_state] [ENCODER:39:TMDS-39] [ 8370.203322] [drm:check_encoder_state] [ENCODER:43:TMDS-43] [ 8370.203324] [drm:check_encoder_state] [ENCODER:46:TMDS-46] [ 8370.203326] [drm:check_encoder_state] [ENCODER:52:TMDS-52] [ 8370.203328] [drm:check_encoder_state] [ENCODER:54:TMDS-54] [ 8370.203330] [drm:check_crtc_state] [CRTC:26] [ 8370.203336] [drm:check_crtc_state] [CRTC:31] [ 8370.203340] [drm:check_crtc_state] [CRTC:36] [ 8370.203381] [drm:intel_dp_detect] [CONNECTOR:47:eDP-1] [ 8370.203386] [drm:intel_power_well_enable] enabling dpio-common-bc [ 8370.221678] [drm:chv_dpio_cmn_power_well_enable] Enabled DPIO PHY0 (PHY_CONTROL=0x050007fd) [ 8370.230891] [drm:edp_panel_vdd_on] Turning eDP port C VDD on [ 8370.230897] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 8370.230909] [drm:vlv_power_sequencer_pipe] picked pipe A power sequencer for port C [ 8370.230927] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x87d00001, PP_OFF 0x1f40001, PP_DIV 0x270f06 [ 8370.230932] [drm:vlv_power_sequencer_kick] kicking pipe A power sequencer for port C [ 8370.230942] [drm:chv_phy_powergate_ch] Power gating DPIO PHY0 CH0 (DPIO_PHY_CONTROL=0x0d0007fd) [ 8370.280655] [drm:chv_phy_powergate_ch] Power gating DPIO PHY0 CH0 (DPIO_PHY_CONTROL=0x050007fd) [ 8370.289353] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control 00000000 [ 8370.289359] [drm:wait_panel_status] Wait complete [ 8370.289371] [drm:edp_panel_vdd_on] PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0008 [ 8370.289375] [drm:edp_panel_vdd_on] eDP port C panel power wasn't enabled [ 8370.371476] [drm:intel_get_hpd_pins] hotplug event received, stat 0x00100000, dig 0x00100000, pins 0x00000040 [ 8370.371479] [drm:intel_hpd_irq_handler] digital hpd port C - long [ 8370.371482] [drm:intel_hpd_irq_storm_detect] Received HPD interrupt on PIN 6 - cnt: 0 [ 8370.371498] [drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port C [ 8370.425754] usb 1-3: reset high-speed USB device number 2 using xhci_hcd [ 8370.493564] [drm:drm_helper_hpd_irq_event] [CONNECTOR:47:eDP-1] status updated from connected to connected [ 8370.493569] [drm:intel_dp_detect] [CONNECTOR:40:DP-1] [ 8370.493578] [drm:drm_helper_hpd_irq_event] [CONNECTOR:40:DP-1] status updated from disconnected to disconnected [ 8370.493582] [drm:intel_hdmi_detect] [CONNECTOR:44:HDMI-A-1] [ 8370.621027] [drm:intel_hdmi_detect] HDMI live status down [ 8370.621039] [drm:drm_helper_hpd_irq_event] [CONNECTOR:44:HDMI-A-1] status updated from disconnected to disconnected [ 8370.621043] [drm:intel_dp_detect] [CONNECTOR:53:DP-2] [ 8370.621048] [drm:intel_power_well_enable] enabling dpio-common-d [ 8370.639657] [drm:chv_dpio_cmn_power_well_enable] Enabled DPIO PHY1 (PHY_CONTROL=0x050007ff) [ 8370.651513] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064 [ 8370.654027] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064 [ 8370.663410] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064 [ 8370.671633] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064 [ 8370.677199] [drm:intel_power_well_disable] disabling dpio-common-d [ 8370.686388] [drm:chv_dpio_cmn_power_well_disable] Disabled DPIO PHY1 (PHY_CONTROL=0x050007fd) [ 8370.695745] [drm:drm_helper_hpd_irq_event] [CONNECTOR:53:DP-2] status updated from disconnected to disconnected [ 8370.695750] [drm:intel_hdmi_detect] [CONNECTOR:55:HDMI-A-2] [ 8370.696064] [drm:gmbus_xfer] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1) [ 8370.696067] [drm:gmbus_xfer] GMBUS [i915 gmbus panel] NAK on first message, retry [ 8370.696340] [drm:gmbus_xfer] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1) [ 8370.696349] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel [ 8370.696356] [drm:drm_helper_hpd_irq_event] [CONNECTOR:55:HDMI-A-2] status updated from disconnected to disconnected [ 8370.696374] [drm:intel_dp_detect] [CONNECTOR:47:eDP-1] [ 8370.696965] [drm:drm_helper_hpd_irq_event] [CONNECTOR:47:eDP-1] status updated from connected to connected [ 8370.696970] [drm:intel_dp_detect] [CONNECTOR:40:DP-1] [ 8370.696977] [drm:drm_helper_hpd_irq_event] [CONNECTOR:40:DP-1] status updated from disconnected to disconnected [ 8370.696981] [drm:intel_hdmi_detect] [CONNECTOR:44:HDMI-A-1] [ 8370.778192] usb 1-4: reset full-speed USB device number 3 using xhci_hcd [ 8370.825114] [drm:intel_hdmi_detect] HDMI live status down [ 8370.825125] [drm:drm_helper_hpd_irq_event] [CONNECTOR:44:HDMI-A-1] status updated from disconnected to disconnected [ 8370.825128] [drm:intel_dp_detect] [CONNECTOR:53:DP-2] [ 8370.825132] [drm:intel_power_well_enable] enabling dpio-common-d [ 8370.843604] [drm:chv_dpio_cmn_power_well_enable] Enabled DPIO PHY1 (PHY_CONTROL=0x050007ff) [ 8370.855371] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064 [ 8370.857884] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064 [ 8370.867364] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064 [ 8370.875356] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064 [ 8370.880882] [drm:intel_power_well_disable] disabling dpio-common-d [ 8370.889841] [drm:chv_dpio_cmn_power_well_disable] Disabled DPIO PHY1 (PHY_CONTROL=0x050007fd) [ 8370.899226] [drm:drm_helper_hpd_irq_event] [CONNECTOR:53:DP-2] status updated from disconnected to disconnected [ 8370.899230] [drm:intel_hdmi_detect] [CONNECTOR:55:HDMI-A-2] [ 8370.899671] [drm:gmbus_xfer] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1) [ 8370.899673] [drm:gmbus_xfer] GMBUS [i915 gmbus panel] NAK on first message, retry [ 8370.900136] [drm:gmbus_xfer] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1) [ 8370.900151] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel [ 8370.900169] [drm:drm_helper_hpd_irq_event] [CONNECTOR:55:HDMI-A-2] status updated from disconnected to disconnected [ 8370.900776] [drm:intel_didl_outputs] 10 outputs detected [ 8370.961439] usb 1-4: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes [ 8371.073653] usb 1-5: reset full-speed USB device number 4 using xhci_hcd [ 8371.204292] PM: resume of devices complete after 1135.795 msecs [ 8371.206472] PM: Finishing wakeup. [ 8371.206479] Restarting tasks ... [ 8371.208775] [drm:drm_mode_setcrtc] [CRTC:26] [ 8371.211342] [drm:drm_mode_setcrtc] [CONNECTOR:47:eDP-1] [ 8371.212082] [drm:connected_sink_compute_bpp] [CONNECTOR:47:eDP-1] checking for sink bpp constrains [ 8371.212092] [drm:connected_sink_compute_bpp] clamping display bpp (was 30) to EDID reported max of 18 [ 8371.212107] [drm:intel_dp_compute_config] DP link computation with max lane count 1 max bw 270000 pixel clock 75610KHz [ 8371.212116] [drm:intel_dp_compute_config] DP link bw 0a rate select 00 lane count 1 clock 270000 bpp 18 [ 8371.212120] [drm:intel_dp_compute_config] DP link bw required 136098 available 216000 [ 8371.212128] [drm:intel_modeset_pipe_config] hw max bpp: 30, pipe bpp: 18, dithering: 1 [ 8371.212137] [drm:intel_dump_pipe_config] [CRTC:26][modeset] config ffff880072472400 for pipe A [ 8371.212142] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 8371.212146] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1 [ 8371.212152] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 8371.212158] [drm:intel_dump_pipe_config] dp: 1, lanes: 1, gmch_m: 2642761, gmch_n: 4194304, link_m: 146820, link_n: 524288, tu: 64 [ 8371.212164] [drm:intel_dump_pipe_config] dp: 1, lanes: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 8371.212168] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 8371.212171] [drm:intel_dump_pipe_config] requested mode: [ 8371.212180] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 75610 1366 1406 1438 1574 768 771 777 800 0x0 0xa [ 8371.212189] [drm:intel_dump_pipe_config] adjusted mode: [ 8371.212196] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 75610 1366 1406 1438 1574 768 771 777 800 0x48 0xa [ 8371.212203] [drm:intel_dump_crtc_timings] crtc timings: 75610 1366 1406 1438 1574 768 771 777 800, type: 0x48 flags: 0xa [ 8371.212208] [drm:intel_dump_pipe_config] port clock: 270000 [ 8371.212212] [drm:intel_dump_pipe_config] pipe src size: 1366x768 [ 8371.212216] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0 [ 8371.212221] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 8371.212226] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 8371.212230] [drm:intel_dump_pipe_config] ips: 0 [ 8371.212234] [drm:intel_dump_pipe_config] double wide: 0 [ 8371.212241] [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0xb0002000, dpll_md: 0x0, fp0: 0x0, fp1: 0x0 [ 8371.212246] [drm:intel_dump_pipe_config] planes on this crtc [ 8371.212252] [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 0.0 idx: 0 enabled [ 8371.212264] [drm:intel_dump_pipe_config] FB:64, fb = 1366x768 format = 0x34325258 [ 8371.212270] [drm:intel_dump_pipe_config] scaler:0 src (0, 0) 0x0 dst (0, 0) 0x0 [ 8371.212277] [drm:intel_dump_pipe_config] CURSOR PLANE:25 plane: 0.1 idx: 1 disabled, scaler_id = 0 [ 8371.212284] [drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 0.1 idx: 2 disabled, scaler_id = 0 [ 8371.212300] [drm:intel_dump_pipe_config] STANDARD PLANE:28 plane: 0.2 idx: 3 disabled, scaler_id = 0 [ 8371.213771] [drm:intel_set_memory_cxsr] memory self-refresh is disabled [ 8371.213814] [drm:chv_phy_powergate_lanes] Power gating DPIO PHY0 CH1 lanes 0xe (PHY_CONTROL=0x150707fd) [ 8371.233581] Bluetooth: hci0: read Intel version: 370810011003110e00 [ 8371.233592] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq [ 8371.242505] done. [ 8371.297358] [drm:edp_panel_on] Turn eDP port C panel power on [ 8371.297366] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 8371.297373] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0008 [ 8371.297376] [drm:wait_panel_status] Wait complete [ 8371.297381] [drm:wait_panel_on] Wait for panel power on [ 8371.297385] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd000b [ 8371.355503] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 8371.355815] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled [ 8371.356032] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled [ 8371.416024] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled [ 8371.416242] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled [ 8371.432099] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 8371.433139] [drm:cherryview_enable_rps] GT fifo had a previous error 1080000 [ 8371.433917] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready [ 8371.442450] [drm:cherryview_enable_rps] GPLL enabled? yes [ 8371.442455] [drm:cherryview_enable_rps] GPU status: 0x00002010 [ 8371.442458] [drm:cherryview_enable_rps] current GPU freq: 320 MHz (32) [ 8371.442461] [drm:cherryview_enable_rps] setting GPU freq to 320 MHz (32) [ 8371.447877] r8169 0000:01:00.0 enp1s0: link down [ 8371.448021] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready [ 8371.453093] [drm:wait_panel_status] Wait complete [ 8371.453103] [drm:edp_panel_vdd_off_sync] Turning eDP port C VDD off [ 8371.453112] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0003 [ 8371.453125] [drm:edp_panel_vdd_on] Turning eDP port C VDD on [ 8371.453131] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b [ 8371.478365] [drm:intel_dp_set_signal_levels] Using vswing level 0 [ 8371.478372] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0 [ 8371.478993] [drm:intel_dp_link_training_clock_recovery] clock recovery OK [ 8371.479887] [drm:intel_dp_link_training_channel_equalization] Channel EQ done. DP Training successful [ 8371.480088] [drm:intel_enable_pipe] enabling pipe A [ 8371.480108] [drm:intel_edp_backlight_on] [ 8371.480111] [drm:intel_panel_enable_backlight] pipe A [ 8371.480116] [drm:intel_panel_actually_set_backlight] set backlight PWM = 1562 [ 8371.480124] [drm:intel_psr_enable] PSR not supported by this panel [ 8371.480136] [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511 [ 8371.480145] [drm:vlv_update_wm] Setting FIFO watermarks - A: plane=425, cursor=63, sprite0=0, sprite1=0, SR: plane=0, cursor=0 level=1 cxsr=0 [ 8371.496822] [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511 [ 8371.496835] [drm:vlv_update_wm] Setting FIFO watermarks - A: plane=425, cursor=63, sprite0=0, sprite1=0, SR: plane=1449, cursor=0 level=1 cxsr=1 [ 8371.496839] [drm:intel_set_memory_cxsr] memory self-refresh is enabled [ 8371.513489] [drm:intel_connector_check_state] [CONNECTOR:47:eDP-1] [ 8371.513500] [drm:check_encoder_state] [ENCODER:39:TMDS-39] [ 8371.513506] [drm:check_encoder_state] [ENCODER:43:TMDS-43] [ 8371.513510] [drm:check_encoder_state] [ENCODER:46:TMDS-46] [ 8371.513512] [drm:check_encoder_state] [ENCODER:52:TMDS-52] [ 8371.513515] [drm:check_encoder_state] [ENCODER:54:TMDS-54] [ 8371.513521] [drm:check_crtc_state] [CRTC:26] [ 8371.519096] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 8371.523970] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=1562/1562 [ 8371.523977] [drm:intel_panel_actually_set_backlight] set backlight PWM = 1562 [ 8371.524176] [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511 [ 8371.524187] [drm:vlv_update_wm] Setting FIFO watermarks - A: plane=425, cursor=0, sprite0=0, sprite1=0, SR: plane=1449, cursor=0 level=1 cxsr=1 [ 8371.524537] [drm:drm_mode_getconnector] [CONNECTOR:47:?] [ 8371.532161] [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511 [ 8371.532174] [drm:vlv_update_wm] Setting FIFO watermarks - A: plane=425, cursor=63, sprite0=0, sprite1=0, SR: plane=1449, cursor=0 level=1 cxsr=1 [ 8371.534507] [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511 [ 8371.534520] [drm:vlv_update_wm] Setting FIFO watermarks - A: plane=425, cursor=0, sprite0=0, sprite1=0, SR: plane=1449, cursor=0 level=1 cxsr=1 [ 8371.558762] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated [ 8374.482788] [drm:edp_panel_vdd_off_sync] Turning eDP port C VDD off [ 8374.482806] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007 [ 8375.011643] wlp2s0: authenticate with 00:26:5a:fc:20:e8 [ 8375.020131] wlp2s0: send auth to 00:26:5a:fc:20:e8 (try 1/3) [ 8375.117961] wlp2s0: send auth to 00:26:5a:fc:20:e8 (try 2/3) [ 8375.152732] wlp2s0: authenticated [ 8375.154772] wlp2s0: associate with 00:26:5a:fc:20:e8 (try 1/3) [ 8375.213663] wlp2s0: associate with 00:26:5a:fc:20:e8 (try 2/3) [ 8375.226639] wlp2s0: RX AssocResp from 00:26:5a:fc:20:e8 (capab=0x431 status=0 aid=7) [ 8375.230063] wlp2s0: associated [ 8375.230177] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready [ 8375.463400] iwlwifi 0000:02:00.0: No association and the time event is over already... [ 8375.463438] wlp2s0: Connection to AP 00:26:5a:fc:20:e8 lost [ 8382.812862] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 8750.895774] [drm:i915_gem_open] [ 8750.937660] [drm:i915_gem_context_create_ioctl] HW context 1 created [ 8750.941972] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 8750.941984] [drm:i915_pages_create_for_stolen] offset=0x428000, size=16384 [ 8750.943511] [drm:i915_gem_context_destroy_ioctl] HW context 1 destroyed [ 9381.156581] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 9381.157317] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 9381.157463] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 9381.157571] acpi device:17: Cannot transition to power state D3hot for parent in (unknown) [ 9381.157683] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 9381.157714] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 9381.157866] pci_bus 0000:01: Allocating resources [ 9381.157894] pci_bus 0000:02: Allocating resources [ 9381.157930] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 9381.157965] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 9381.158184] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 9381.158305] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 9381.159792] intel-vbtn INT33D6:00: unknown event index 0xcd [ 9381.187351] [drm:drm_mode_getconnector] [CONNECTOR:47:?] [ 9381.187361] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:47:eDP-1] [ 9381.187365] [drm:intel_dp_detect] [CONNECTOR:47:eDP-1] [ 9381.187381] [drm:edp_panel_vdd_on] Turning eDP port C VDD on [ 9381.187390] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f [ 9381.190141] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 9381.190151] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:47:eDP-1] probed modes : [ 9381.190156] [drm:drm_mode_debug_printmodeline] Modeline 48:"1366x768" 60 75610 1366 1406 1438 1574 768 771 777 800 0x48 0xa [ 9381.190173] [drm:drm_mode_getconnector] [CONNECTOR:47:?] [ 9381.191514] [drm:drm_mode_getconnector] [CONNECTOR:40:?] [ 9381.191544] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:40:DP-1] [ 9381.191548] [drm:intel_dp_detect] [CONNECTOR:40:DP-1] [ 9381.191558] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:40:DP-1] disconnected [ 9381.191572] [drm:drm_mode_getconnector] [CONNECTOR:53:?] [ 9381.191576] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:53:DP-2] [ 9381.191578] [drm:intel_dp_detect] [CONNECTOR:53:DP-2] [ 9381.191582] [drm:intel_power_well_enable] enabling dpio-common-d [ 9381.207351] [drm:chv_dpio_cmn_power_well_enable] Enabled DPIO PHY1 (PHY_CONTROL=0x150707ff) [ 9381.217886] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064 [ 9381.220430] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064 [ 9381.230595] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064 [ 9381.243379] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064 [ 9381.251402] [drm:intel_power_well_disable] disabling dpio-common-d [ 9381.259374] [drm:chv_dpio_cmn_power_well_disable] Disabled DPIO PHY1 (PHY_CONTROL=0x150707fd) [ 9381.267379] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:53:DP-2] disconnected [ 9381.267429] [drm:drm_mode_getconnector] [CONNECTOR:44:?] [ 9381.267434] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:44:HDMI-A-1] [ 9381.267438] [drm:intel_hdmi_detect] [CONNECTOR:44:HDMI-A-1] [ 9381.395430] [drm:intel_hdmi_detect] HDMI live status down [ 9381.395443] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:44:HDMI-A-1] disconnected [ 9381.395487] [drm:drm_mode_getconnector] [CONNECTOR:55:?] [ 9381.395492] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:55:HDMI-A-2] [ 9381.395494] [drm:intel_hdmi_detect] [CONNECTOR:55:HDMI-A-2] [ 9381.395866] [drm:gmbus_xfer] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1) [ 9381.395871] [drm:gmbus_xfer] GMBUS [i915 gmbus panel] NAK on first message, retry [ 9381.396249] [drm:gmbus_xfer] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1) [ 9381.396256] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel [ 9381.396260] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:55:HDMI-A-2] disconnected [ 9381.403239] [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511 [ 9381.403261] [drm:vlv_update_wm] Setting FIFO watermarks - A: plane=425, cursor=63, sprite0=0, sprite1=0, SR: plane=1449, cursor=0 level=1 cxsr=1 [ 9381.404773] [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511 [ 9381.404795] [drm:vlv_update_wm] Setting FIFO watermarks - A: plane=425, cursor=0, sprite0=0, sprite1=0, SR: plane=1449, cursor=0 level=1 cxsr=1 [ 9381.405535] [drm:drm_mode_getconnector] [CONNECTOR:47:?] [ 9381.421754] [drm:connected_sink_compute_bpp] [CONNECTOR:47:eDP-1] checking for sink bpp constrains [ 9381.421763] [drm:connected_sink_compute_bpp] clamping display bpp (was 30) to EDID reported max of 18 [ 9381.421773] [drm:intel_dp_compute_config] DP link computation with max lane count 1 max bw 270000 pixel clock 75610KHz [ 9381.421780] [drm:intel_dp_compute_config] DP link bw 0a rate select 00 lane count 1 clock 270000 bpp 18 [ 9381.421783] [drm:intel_dp_compute_config] DP link bw required 136098 available 216000 [ 9381.421789] [drm:intel_modeset_pipe_config] hw max bpp: 30, pipe bpp: 18, dithering: 1 [ 9381.421796] [drm:intel_dump_pipe_config] [CRTC:26][modeset] config ffff88002689ac00 for pipe A [ 9381.421799] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 9381.421803] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1 [ 9381.421807] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 9381.421813] [drm:intel_dump_pipe_config] dp: 1, lanes: 1, gmch_m: 2642761, gmch_n: 4194304, link_m: 146820, link_n: 524288, tu: 64 [ 9381.421817] [drm:intel_dump_pipe_config] dp: 1, lanes: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 9381.421821] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 9381.421824] [drm:intel_dump_pipe_config] requested mode: [ 9381.421831] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 75610 1366 1406 1438 1574 768 771 777 800 0x0 0xa [ 9381.421835] [drm:intel_dump_pipe_config] adjusted mode: [ 9381.421841] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 75610 1366 1406 1438 1574 768 771 777 800 0x48 0xa [ 9381.421847] [drm:intel_dump_crtc_timings] crtc timings: 75610 1366 1406 1438 1574 768 771 777 800, type: 0x48 flags: 0xa [ 9381.421850] [drm:intel_dump_pipe_config] port clock: 270000 [ 9381.421853] [drm:intel_dump_pipe_config] pipe src size: 1366x768 [ 9381.421857] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0 [ 9381.421861] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 9381.421866] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 9381.421869] [drm:intel_dump_pipe_config] ips: 0 [ 9381.421872] [drm:intel_dump_pipe_config] double wide: 0 [ 9381.421876] [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0xb0002000, dpll_md: 0x0, fp0: 0x0, fp1: 0x0 [ 9381.421880] [drm:intel_dump_pipe_config] planes on this crtc [ 9381.421884] [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 0.0 idx: 0 enabled [ 9381.421889] [drm:intel_dump_pipe_config] FB:64, fb = 1366x768 format = 0x34325258 [ 9381.421894] [drm:intel_dump_pipe_config] scaler:0 src (0, 0) 1366x768 dst (0, 0) 1366x768 [ 9381.421899] [drm:intel_dump_pipe_config] CURSOR PLANE:25 plane: 0.1 idx: 1 enabled [ 9381.421903] [drm:intel_dump_pipe_config] FB:56, fb = 64x64 format = 0x34325241 [ 9381.421908] [drm:intel_dump_pipe_config] scaler:0 src (0, 0) 64x64 dst (628, 390) 64x64 [ 9381.421913] [drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 0.1 idx: 2 disabled, scaler_id = 0 [ 9381.421918] [drm:intel_dump_pipe_config] STANDARD PLANE:28 plane: 0.2 idx: 3 disabled, scaler_id = 0 [ 9381.431697] [drm:intel_set_memory_cxsr] memory self-refresh is disabled [ 9381.440260] [drm:intel_set_memory_cxsr] memory self-refresh is disabled [ 9381.456881] [drm:intel_edp_backlight_off] [ 9381.659761] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0 [ 9381.659964] [drm:edp_panel_off] Turn eDP port C panel power off [ 9381.659973] [drm:wait_panel_off] Wait for panel power off time [ 9381.659982] [drm:wait_panel_status] mask b0000000 value 00000000 status e0000003 control abcd0000 [ 9381.699929] [drm:intel_get_hpd_pins] hotplug event received, stat 0x00100000, dig 0x00100000, pins 0x00000040 [ 9381.699953] [drm:intel_hpd_irq_handler] digital hpd port C - long [ 9381.699959] [drm:intel_hpd_irq_storm_detect] Received HPD interrupt on PIN 6 - cnt: 0 [ 9381.700001] [drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port C [ 9381.700419] [drm:wait_panel_status] Wait complete [ 9381.700444] [drm:intel_disable_pipe] disabling pipe A [ 9381.706915] [drm:intel_dp_link_down] [ 9381.778055] [drm:chv_phy_powergate_lanes] Power gating DPIO PHY0 CH1 lanes 0x0 (PHY_CONTROL=0x050007fd) [ 9381.789378] [drm:intel_power_well_disable] disabling dpio-common-bc [ 9381.798871] [drm:chv_dpio_cmn_power_well_disable] Disabled DPIO PHY0 (PHY_CONTROL=0x050007fc) [ 9381.807877] [drm:intel_power_well_disable] disabling display [ 9381.816479] [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511 [ 9381.816495] [drm:vlv_update_wm] Setting FIFO watermarks - A: plane=0, cursor=0, sprite0=0, sprite1=0, SR: plane=0, cursor=0 level=1 cxsr=0 [ 9381.816512] [drm:intel_connector_check_state] [CONNECTOR:47:eDP-1] [ 9381.816518] [drm:check_encoder_state] [ENCODER:39:TMDS-39] [ 9381.816524] [drm:check_encoder_state] [ENCODER:43:TMDS-43] [ 9381.816527] [drm:check_encoder_state] [ENCODER:46:TMDS-46] [ 9381.816531] [drm:check_encoder_state] [ENCODER:52:TMDS-52] [ 9381.816534] [drm:check_encoder_state] [ENCODER:54:TMDS-54] [ 9381.816538] [drm:check_crtc_state] [CRTC:26] [ 9382.863892] PM: Syncing filesystems ... done. [ 9383.043931] PM: Preparing system for sleep (mem) [ 9383.045893] Freezing user space processes ... (elapsed 0.063 seconds) done. [ 9383.109846] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 9383.111666] PM: Suspending system (mem) [ 9383.111693] Suspending console(s) (use no_console_suspend to debug) [ 9383.169243] [drm:intel_power_well_enable] enabling always-on [ 9383.169245] [drm:intel_power_well_enable] enabling display [ 9383.176184] [drm:i915_redisable_vga_power_on] Something enabled VGA plane, disabling it [ 9383.176490] [drm:intel_power_well_enable] enabling dpio-common-bc [ 9383.176506] [drm:intel_dp_detect] [CONNECTOR:47:eDP-1] [ 9383.192169] [drm:chv_dpio_cmn_power_well_enable] Enabled DPIO PHY0 (PHY_CONTROL=0x050007fd) [ 9383.200173] [drm:intel_power_well_enable] enabling dpio-common-d [ 9383.216176] [drm:chv_dpio_cmn_power_well_enable] Enabled DPIO PHY1 (PHY_CONTROL=0x050007ff) [ 9383.224517] [drm:edp_panel_vdd_on] Turning eDP port C VDD on [ 9383.224519] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 9383.224521] [drm:vlv_power_sequencer_pipe] picked pipe A power sequencer for port C [ 9383.224528] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x87d00001, PP_OFF 0x1f40001, PP_DIV 0x270f06 [ 9383.224530] [drm:vlv_power_sequencer_kick] kicking pipe A power sequencer for port C [ 9383.224534] [drm:chv_phy_powergate_ch] Power gating DPIO PHY0 CH0 (DPIO_PHY_CONTROL=0x0d0007ff) [ 9383.268831] [drm:chv_phy_powergate_ch] Power gating DPIO PHY0 CH0 (DPIO_PHY_CONTROL=0x050007ff) [ 9383.276207] [drm:wait_panel_status] mask b800000f value 00000000 status 08000001 control 00000000 [ 9383.668614] [drm:wait_panel_status] Wait complete [ 9383.668626] [drm:edp_panel_vdd_on] PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0008 [ 9383.668629] [drm:edp_panel_vdd_on] eDP port C panel power wasn't enabled [ 9383.751091] [drm:intel_get_hpd_pins] hotplug event received, stat 0x00100000, dig 0x00100000, pins 0x00000040 [ 9383.751101] [drm:intel_hpd_irq_handler] digital hpd port C - long [ 9383.751111] [drm:intel_hpd_irq_storm_detect] Received HPD interrupt on PIN 6 - cnt: 0 [ 9383.751199] [drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port C [ 9383.873622] [drm:drm_helper_hpd_irq_event] [CONNECTOR:47:eDP-1] status updated from connected to connected [ 9383.873628] [drm:intel_dp_detect] [CONNECTOR:40:DP-1] [ 9383.873634] [drm:drm_helper_hpd_irq_event] [CONNECTOR:40:DP-1] status updated from disconnected to disconnected [ 9383.873638] [drm:intel_hdmi_detect] [CONNECTOR:44:HDMI-A-1] [ 9384.000858] [drm:intel_hdmi_detect] HDMI live status down [ 9384.000872] [drm:drm_helper_hpd_irq_event] [CONNECTOR:44:HDMI-A-1] status updated from disconnected to disconnected [ 9384.000876] [drm:intel_dp_detect] [CONNECTOR:53:DP-2] [ 9384.003405] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064 [ 9384.005911] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064 [ 9384.015137] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064 [ 9384.023064] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064 [ 9384.028652] [drm:drm_helper_hpd_irq_event] [CONNECTOR:53:DP-2] status updated from disconnected to disconnected [ 9384.028656] [drm:intel_hdmi_detect] [CONNECTOR:55:HDMI-A-2] [ 9384.029163] [drm:gmbus_xfer] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1) [ 9384.029165] [drm:gmbus_xfer] GMBUS [i915 gmbus panel] NAK on first message, retry [ 9384.029587] [drm:gmbus_xfer] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1) [ 9384.029592] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel [ 9384.029597] [drm:drm_helper_hpd_irq_event] [CONNECTOR:55:HDMI-A-2] status updated from disconnected to disconnected [ 9384.029687] [drm:edp_panel_vdd_off_sync] Turning eDP port C VDD off [ 9384.029698] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0000 [ 9384.086214] [drm:intel_power_well_disable] disabling dpio-common-d [ 9384.094976] [drm:chv_dpio_cmn_power_well_disable] Disabled DPIO PHY1 (PHY_CONTROL=0x050007fd) [ 9384.104297] [drm:intel_power_well_disable] disabling dpio-common-bc [ 9384.113630] [drm:chv_dpio_cmn_power_well_disable] Disabled DPIO PHY0 (PHY_CONTROL=0x050007fc) [ 9384.122930] [drm:intel_power_well_disable] disabling display [ 9384.132338] [drm:intel_power_well_disable] disabling always-on [ 9384.132423] PM: suspend of devices complete after 1019.901 msecs [ 9384.153087] PM: late suspend of devices complete after 20.645 msecs [ 9384.154240] r8169 0000:01:00.0: System wakeup enabled by ACPI [ 9384.155573] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [ 9384.169811] PM: noirq suspend of devices complete after 16.711 msecs [ 9384.169854] ACPI: Preparing to enter system sleep state S3 [ 9384.240701] ACPI : EC: EC stopped [ 9384.240703] PM: Saving platform NVS memory [ 9384.240801] Disabling non-boot CPUs ... [ 9384.241577] Broke affinity for irq 1 [ 9384.241598] Broke affinity for irq 9 [ 9384.241617] Broke affinity for irq 34 [ 9384.241631] Broke affinity for irq 37 [ 9384.241691] Broke affinity for irq 115 [ 9384.241858] Broke affinity for irq 311 [ 9384.241889] Broke affinity for irq 315 [ 9384.243080] smpboot: CPU 1 is now offline [ 9384.255315] ACPI: Low-level resume complete [ 9384.255400] ACPI : EC: EC started [ 9384.255401] PM: Restoring platform NVS memory [ 9384.256220] Enabling non-boot CPUs ... [ 9384.274808] x86: Booting SMP configuration: [ 9384.274813] smpboot: Booting Node 0 Processor 1 APIC 0x4 [ 9384.282892] cache: parent cpu1 should not be sleeping [ 9384.283376] CPU1 is up [ 9384.284217] ACPI: Waking up from system sleep state S3 [ 9384.402952] intel-vbtn INT33D6:00: unknown event index 0xcd [ 9384.615888] acpi LNXPOWER:03: Turning OFF [ 9384.616012] acpi LNXPOWER:02: Turning OFF [ 9384.618575] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [ 9384.631558] PM: noirq resume of devices complete after 15.389 msecs [ 9384.643442] [drm:chv_phy_control_init] Initial PHY_CONTROL=0x050007fc [ 9384.643447] [drm:intel_power_well_enable] enabling always-on [ 9384.643449] [drm:intel_power_well_enable] enabling display [ 9384.645762] [drm:intel_power_well_enable] enabling dpio-common-bc [ 9384.664323] [drm:chv_dpio_cmn_power_well_enable] Enabled DPIO PHY0 (PHY_CONTROL=0x050007fd) [ 9384.673641] [drm:intel_power_well_enable] enabling dpio-common-d [ 9384.692306] [drm:chv_dpio_cmn_power_well_enable] Enabled DPIO PHY1 (PHY_CONTROL=0x050007ff) [ 9385.646157] PM: early resume of devices complete after 1013.988 msecs [ 9385.647287] r8169 0000:01:00.0: System wakeup disabled by ACPI [ 9385.657983] rtc_cmos 00:04: System wakeup disabled by ACPI [ 9385.692361] xhci_hcd 0000:00:14.0: port 4 resume PLC timeout [ 9385.710607] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout [ 9385.712901] [drm:i915_redisable_vga_power_on] Something enabled VGA plane, disabling it [ 9385.713218] [drm:intel_opregion_setup] graphic opregion physical addr: 0x76677000 [ 9385.713261] [drm:intel_opregion_setup] Public ACPI methods supported [ 9385.713262] [drm:intel_opregion_setup] ASLE supported [ 9385.713278] [drm:vlv_initial_power_sequencer_setup] no initial power sequencer for port C [ 9385.713323] [drm:gen8_init_common_ring] Execlists enabled for render ring [ 9385.713330] [drm:gen8_init_common_ring] Execlists enabled for bsd ring [ 9385.713336] [drm:gen8_init_common_ring] Execlists enabled for blitter ring [ 9385.713342] [drm:gen8_init_common_ring] Execlists enabled for video enhancement ring [ 9385.715192] [drm:intel_update_cdclk] Current CD clock rate: 266667 kHz [ 9385.715274] [drm:intel_modeset_readout_hw_state] [CRTC:26] hw state readout: disabled [ 9385.715280] [drm:intel_modeset_readout_hw_state] [CRTC:31] hw state readout: disabled [ 9385.715286] [drm:intel_modeset_readout_hw_state] [CRTC:36] hw state readout: disabled [ 9385.715291] [drm:intel_modeset_readout_hw_state] [ENCODER:39:TMDS-39] hw state readout: disabled, pipe A [ 9385.715296] [drm:intel_modeset_readout_hw_state] [ENCODER:43:TMDS-43] hw state readout: disabled, pipe A [ 9385.715299] [drm:intel_modeset_readout_hw_state] [ENCODER:46:TMDS-46] hw state readout: disabled, pipe A [ 9385.715306] [drm:intel_modeset_readout_hw_state] [ENCODER:52:TMDS-52] hw state readout: disabled, pipe A [ 9385.715313] [drm:intel_modeset_readout_hw_state] [ENCODER:54:TMDS-54] hw state readout: disabled, pipe A [ 9385.715316] [drm:intel_modeset_readout_hw_state] [CONNECTOR:47:eDP-1] hw state readout: disabled [ 9385.715320] [drm:intel_modeset_readout_hw_state] [CONNECTOR:40:DP-1] hw state readout: disabled [ 9385.715324] [drm:intel_modeset_readout_hw_state] [CONNECTOR:44:HDMI-A-1] hw state readout: disabled [ 9385.715330] [drm:intel_modeset_readout_hw_state] [CONNECTOR:53:DP-2] hw state readout: disabled [ 9385.715334] [drm:intel_modeset_readout_hw_state] [CONNECTOR:55:HDMI-A-2] hw state readout: disabled [ 9385.715342] [drm:intel_dump_pipe_config] [CRTC:26][setup_hw_state] config ffff88002689ac00 for pipe A [ 9385.715344] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 9385.715345] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 9385.715348] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 9385.715351] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 9385.715353] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 9385.715355] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 9385.715356] [drm:intel_dump_pipe_config] requested mode: [ 9385.715362] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 9385.715363] [drm:intel_dump_pipe_config] adjusted mode: [ 9385.715367] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 9385.715371] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 9385.715372] [drm:intel_dump_pipe_config] port clock: 0 [ 9385.715374] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 9385.715376] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0 [ 9385.715378] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 9385.715380] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 9385.715382] [drm:intel_dump_pipe_config] ips: 0 [ 9385.715383] [drm:intel_dump_pipe_config] double wide: 0 [ 9385.715385] [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0x0, dpll_md: 0x0, fp0: 0x0, fp1: 0x0 [ 9385.715387] [drm:intel_dump_pipe_config] planes on this crtc [ 9385.715395] [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 0.0 idx: 0 enabled [ 9385.715398] [drm:intel_dump_pipe_config] FB:64, fb = 1366x768 format = 0x34325258 [ 9385.715398] [drm:intel_dump_pipe_config] scaler:0 src (0, 0) 0x0 dst (0, 0) 0x0 [ 9385.715404] [drm:intel_dump_pipe_config] CURSOR PLANE:25 plane: 0.1 idx: 1 enabled [ 9385.715408] [drm:intel_dump_pipe_config] FB:56, fb = 64x64 format = 0x34325241 [ 9385.715408] [drm:intel_dump_pipe_config] scaler:0 src (0, 0) 4294966668x4294966906 dst (628, 390) 4294966668x4294966906 [ 9385.715410] [drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 0.1 idx: 2 disabled, scaler_id = 0 [ 9385.715413] [drm:intel_dump_pipe_config] STANDARD PLANE:28 plane: 0.2 idx: 3 disabled, scaler_id = 0 [ 9385.715419] [drm:intel_dump_pipe_config] [CRTC:31][setup_hw_state] config ffff88002689b000 for pipe B [ 9385.715420] [drm:intel_dump_pipe_config] cpu_transcoder: B [ 9385.715422] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 9385.715424] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 9385.715427] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 9385.715429] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 9385.715431] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 9385.715432] [drm:intel_dump_pipe_config] requested mode: [ 9385.715436] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 9385.715437] [drm:intel_dump_pipe_config] adjusted mode: [ 9385.715440] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 9385.715443] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 9385.715445] [drm:intel_dump_pipe_config] port clock: 0 [ 9385.715446] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 9385.715449] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0 [ 9385.715451] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 9385.715453] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 9385.715454] [drm:intel_dump_pipe_config] ips: 0 [ 9385.715456] [drm:intel_dump_pipe_config] double wide: 0 [ 9385.715458] [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0x0, dpll_md: 0x0, fp0: 0x0, fp1: 0x0 [ 9385.715459] [drm:intel_dump_pipe_config] planes on this crtc [ 9385.715462] [drm:intel_dump_pipe_config] STANDARD PLANE:29 plane: 1.0 idx: 4 disabled, scaler_id = 0 [ 9385.715464] [drm:intel_dump_pipe_config] CURSOR PLANE:30 plane: 1.2 idx: 5 disabled, scaler_id = 0 [ 9385.715467] [drm:intel_dump_pipe_config] STANDARD PLANE:32 plane: 1.1 idx: 6 disabled, scaler_id = 0 [ 9385.715469] [drm:intel_dump_pipe_config] STANDARD PLANE:33 plane: 1.2 idx: 7 disabled, scaler_id = 0 [ 9385.715473] [drm:intel_dump_pipe_config] [CRTC:36][setup_hw_state] config ffff880026898c00 for pipe C [ 9385.715475] [drm:intel_dump_pipe_config] cpu_transcoder: C [ 9385.715476] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 9385.715479] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 9385.715481] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 9385.715484] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 9385.715485] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 9385.715486] [drm:intel_dump_pipe_config] requested mode: [ 9385.715490] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 9385.715491] [drm:intel_dump_pipe_config] adjusted mode: [ 9385.715494] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 9385.715498] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 9385.715499] [drm:intel_dump_pipe_config] port clock: 0 [ 9385.715500] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 9385.715504] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0 [ 9385.715506] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 9385.715507] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 9385.715509] [drm:intel_dump_pipe_config] ips: 0 [ 9385.715510] [drm:intel_dump_pipe_config] double wide: 0 [ 9385.715512] [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0x0, dpll_md: 0x0, fp0: 0x0, fp1: 0x0 [ 9385.715513] [drm:intel_dump_pipe_config] planes on this crtc [ 9385.715516] [drm:intel_dump_pipe_config] STANDARD PLANE:34 plane: 2.0 idx: 8 disabled, scaler_id = 0 [ 9385.715519] [drm:intel_dump_pipe_config] CURSOR PLANE:35 plane: 2.3 idx: 9 disabled, scaler_id = 0 [ 9385.715521] [drm:intel_dump_pipe_config] STANDARD PLANE:37 plane: 2.1 idx: 10 disabled, scaler_id = 0 [ 9385.715524] [drm:intel_dump_pipe_config] STANDARD PLANE:38 plane: 2.2 idx: 11 disabled, scaler_id = 0 [ 9385.715540] [drm:vlv_get_fifo_size] Pipe A primary A FIFO size: 256 [ 9385.715550] [drm:vlv_get_fifo_size] Pipe A sprite A FIFO size: 128 [ 9385.715554] [drm:vlv_get_fifo_size] Pipe A sprite B FIFO size: 127 [ 9385.715557] [drm:vlv_get_fifo_size] Pipe B primary B FIFO size: 256 [ 9385.715561] [drm:vlv_get_fifo_size] Pipe B sprite C FIFO size: 128 [ 9385.715564] [drm:vlv_get_fifo_size] Pipe B sprite D FIFO size: 127 [ 9385.715568] [drm:vlv_get_fifo_size] Pipe C primary C FIFO size: 256 [ 9385.715572] [drm:vlv_get_fifo_size] Pipe C sprite E FIFO size: 128 [ 9385.715575] [drm:vlv_get_fifo_size] Pipe C sprite F FIFO size: 127 [ 9385.717591] r8169 0000:01:00.0 enp1s0: link down [ 9385.735839] [drm:vlv_wm_get_hw_state] Punit not acking DDR DVFS request, assuming DDR DVFS is disabled [ 9385.735844] [drm:vlv_wm_get_hw_state] Initial watermarks: pipe A, plane=15, cursor=15, sprite0=15, sprite1=15 [ 9385.735847] [drm:vlv_wm_get_hw_state] Initial watermarks: pipe B, plane=15, cursor=15, sprite0=15, sprite1=15 [ 9385.735849] [drm:vlv_wm_get_hw_state] Initial watermarks: pipe C, plane=15, cursor=15, sprite0=15, sprite1=15 [ 9385.735852] [drm:vlv_wm_get_hw_state] Initial watermarks: SR plane=127, SR cursor=0 level=0 cxsr=0 [ 9385.735857] [drm:intel_power_well_disable] disabling dpio-common-d [ 9385.745216] [drm:chv_dpio_cmn_power_well_disable] Disabled DPIO PHY1 (PHY_CONTROL=0x050007fd) [ 9385.754161] [drm:intel_power_well_disable] disabling dpio-common-bc [ 9385.763228] [drm:chv_dpio_cmn_power_well_disable] Disabled DPIO PHY0 (PHY_CONTROL=0x050007fc) [ 9385.772659] [drm:intel_power_well_disable] disabling always-on [ 9385.772691] [drm:connected_sink_compute_bpp] [CONNECTOR:47:eDP-1] checking for sink bpp constrains [ 9385.772694] [drm:connected_sink_compute_bpp] clamping display bpp (was 30) to EDID reported max of 18 [ 9385.772701] [drm:intel_dp_compute_config] DP link computation with max lane count 1 max bw 270000 pixel clock 75610KHz [ 9385.772705] [drm:intel_dp_compute_config] DP link bw 0a rate select 00 lane count 1 clock 270000 bpp 18 [ 9385.772707] [drm:intel_dp_compute_config] DP link bw required 136098 available 216000 [ 9385.772710] [drm:intel_modeset_pipe_config] hw max bpp: 30, pipe bpp: 18, dithering: 1 [ 9385.772715] [drm:intel_dump_pipe_config] [CRTC:26][modeset] config ffff88004ba11800 for pipe A [ 9385.772716] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 9385.772718] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1 [ 9385.772722] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 9385.772725] [drm:intel_dump_pipe_config] dp: 1, lanes: 1, gmch_m: 2642761, gmch_n: 4194304, link_m: 146820, link_n: 524288, tu: 64 [ 9385.772728] [drm:intel_dump_pipe_config] dp: 1, lanes: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 9385.772729] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 9385.772731] [drm:intel_dump_pipe_config] requested mode: [ 9385.772735] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 75610 1366 1406 1438 1574 768 771 777 800 0x0 0xa [ 9385.772737] [drm:intel_dump_pipe_config] adjusted mode: [ 9385.772741] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 75610 1366 1406 1438 1574 768 771 777 800 0x48 0xa [ 9385.772744] [drm:intel_dump_crtc_timings] crtc timings: 75610 1366 1406 1438 1574 768 771 777 800, type: 0x48 flags: 0xa [ 9385.772746] [drm:intel_dump_pipe_config] port clock: 270000 [ 9385.772747] [drm:intel_dump_pipe_config] pipe src size: 1366x768 [ 9385.772749] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0 [ 9385.772751] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 9385.772753] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 9385.772755] [drm:intel_dump_pipe_config] ips: 0 [ 9385.772756] [drm:intel_dump_pipe_config] double wide: 0 [ 9385.772759] [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0xb0002000, dpll_md: 0x0, fp0: 0x0, fp1: 0x0 [ 9385.772760] [drm:intel_dump_pipe_config] planes on this crtc [ 9385.772768] [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 0.0 idx: 0 enabled [ 9385.772771] [drm:intel_dump_pipe_config] FB:64, fb = 1366x768 format = 0x34325258 [ 9385.772771] [drm:intel_dump_pipe_config] scaler:0 src (0, 0) 0x0 dst (0, 0) 0x0 [ 9385.772777] [drm:intel_dump_pipe_config] CURSOR PLANE:25 plane: 0.1 idx: 1 enabled [ 9385.772782] [drm:intel_dump_pipe_config] FB:56, fb = 64x64 format = 0x34325241 [ 9385.772783] [drm:intel_dump_pipe_config] scaler:0 src (0, 0) 4294966668x4294966906 dst (628, 390) 4294966668x4294966906 [ 9385.772786] [drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 0.1 idx: 2 disabled, scaler_id = 0 [ 9385.772790] [drm:intel_dump_pipe_config] STANDARD PLANE:28 plane: 0.2 idx: 3 disabled, scaler_id = 0 [ 9385.772829] [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511 [ 9385.772840] [drm:vlv_update_wm] Setting FIFO watermarks - A: plane=0, cursor=0, sprite0=0, sprite1=0, SR: plane=0, cursor=0 level=1 cxsr=0 [ 9385.777445] [drm:vlv_pipe_set_fifo_size] Pipe B FIFO split 511 / 511 / 511 [ 9385.777455] [drm:vlv_pipe_set_fifo_size] Pipe C FIFO split 511 / 511 / 511 [ 9385.777471] [drm:intel_connector_check_state] [CONNECTOR:47:eDP-1] [ 9385.777477] [drm:intel_connector_check_state] [CONNECTOR:40:DP-1] [ 9385.777479] [drm:intel_connector_check_state] [CONNECTOR:44:HDMI-A-1] [ 9385.777482] [drm:intel_connector_check_state] [CONNECTOR:53:DP-2] [ 9385.777485] [drm:intel_connector_check_state] [CONNECTOR:55:HDMI-A-2] [ 9385.777487] [drm:check_encoder_state] [ENCODER:39:TMDS-39] [ 9385.777491] [drm:check_encoder_state] [ENCODER:43:TMDS-43] [ 9385.777492] [drm:check_encoder_state] [ENCODER:46:TMDS-46] [ 9385.777494] [drm:check_encoder_state] [ENCODER:52:TMDS-52] [ 9385.777497] [drm:check_encoder_state] [ENCODER:54:TMDS-54] [ 9385.777499] [drm:check_crtc_state] [CRTC:26] [ 9385.777503] [drm:check_crtc_state] [CRTC:31] [ 9385.777507] [drm:check_crtc_state] [CRTC:36] [ 9385.777548] [drm:intel_dp_detect] [CONNECTOR:47:eDP-1] [ 9385.777553] [drm:intel_power_well_enable] enabling dpio-common-bc [ 9385.797495] [drm:chv_dpio_cmn_power_well_enable] Enabled DPIO PHY0 (PHY_CONTROL=0x050007fd) [ 9385.806964] [drm:edp_panel_vdd_on] Turning eDP port C VDD on [ 9385.806967] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 9385.806973] [drm:vlv_power_sequencer_pipe] picked pipe A power sequencer for port C [ 9385.806983] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x87d00001, PP_OFF 0x1f40001, PP_DIV 0x270f06 [ 9385.806987] [drm:vlv_power_sequencer_kick] kicking pipe A power sequencer for port C [ 9385.806996] [drm:chv_phy_powergate_ch] Power gating DPIO PHY0 CH0 (DPIO_PHY_CONTROL=0x0d0007fd) [ 9385.852721] [drm:chv_phy_powergate_ch] Power gating DPIO PHY0 CH0 (DPIO_PHY_CONTROL=0x050007fd) [ 9385.861692] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control 00000000 [ 9385.861697] [drm:wait_panel_status] Wait complete [ 9385.861705] [drm:edp_panel_vdd_on] PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0008 [ 9385.861709] [drm:edp_panel_vdd_on] eDP port C panel power wasn't enabled [ 9385.935672] usb 1-3: reset high-speed USB device number 2 using xhci_hcd [ 9385.944110] [drm:intel_get_hpd_pins] hotplug event received, stat 0x00100000, dig 0x00100000, pins 0x00000040 [ 9385.944113] [drm:intel_hpd_irq_handler] digital hpd port C - long [ 9385.944116] [drm:intel_hpd_irq_storm_detect] Received HPD interrupt on PIN 6 - cnt: 0 [ 9385.944141] [drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port C [ 9386.063864] [drm:drm_helper_hpd_irq_event] [CONNECTOR:47:eDP-1] status updated from connected to connected [ 9386.063869] [drm:intel_dp_detect] [CONNECTOR:40:DP-1] [ 9386.063875] [drm:drm_helper_hpd_irq_event] [CONNECTOR:40:DP-1] status updated from disconnected to disconnected [ 9386.063878] [drm:intel_hdmi_detect] [CONNECTOR:44:HDMI-A-1] [ 9386.191510] [drm:intel_hdmi_detect] HDMI live status down [ 9386.191522] [drm:drm_helper_hpd_irq_event] [CONNECTOR:44:HDMI-A-1] status updated from disconnected to disconnected [ 9386.191525] [drm:intel_dp_detect] [CONNECTOR:53:DP-2] [ 9386.191530] [drm:intel_power_well_enable] enabling dpio-common-d [ 9386.209279] [drm:chv_dpio_cmn_power_well_enable] Enabled DPIO PHY1 (PHY_CONTROL=0x050007ff) [ 9386.220952] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064 [ 9386.223469] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064 [ 9386.231372] usb 1-4: reset full-speed USB device number 3 using xhci_hcd [ 9386.233637] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064 [ 9386.242079] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064 [ 9386.247142] [drm:intel_power_well_disable] disabling dpio-common-d [ 9386.255878] [drm:chv_dpio_cmn_power_well_disable] Disabled DPIO PHY1 (PHY_CONTROL=0x050007fd) [ 9386.265184] [drm:drm_helper_hpd_irq_event] [CONNECTOR:53:DP-2] status updated from disconnected to disconnected [ 9386.265188] [drm:intel_hdmi_detect] [CONNECTOR:55:HDMI-A-2] [ 9386.265490] [drm:gmbus_xfer] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1) [ 9386.265493] [drm:gmbus_xfer] GMBUS [i915 gmbus panel] NAK on first message, retry [ 9386.265821] [drm:gmbus_xfer] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1) [ 9386.265828] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel [ 9386.265833] [drm:drm_helper_hpd_irq_event] [CONNECTOR:55:HDMI-A-2] status updated from disconnected to disconnected [ 9386.265852] [drm:intel_dp_detect] [CONNECTOR:47:eDP-1] [ 9386.266398] [drm:drm_helper_hpd_irq_event] [CONNECTOR:47:eDP-1] status updated from connected to connected [ 9386.266400] [drm:intel_dp_detect] [CONNECTOR:40:DP-1] [ 9386.266405] [drm:drm_helper_hpd_irq_event] [CONNECTOR:40:DP-1] status updated from disconnected to disconnected [ 9386.266409] [drm:intel_hdmi_detect] [CONNECTOR:44:HDMI-A-1] [ 9386.359846] usb 1-4: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes [ 9386.391460] [drm:intel_hdmi_detect] HDMI live status down [ 9386.391470] [drm:drm_helper_hpd_irq_event] [CONNECTOR:44:HDMI-A-1] status updated from disconnected to disconnected [ 9386.391473] [drm:intel_dp_detect] [CONNECTOR:53:DP-2] [ 9386.391477] [drm:intel_power_well_enable] enabling dpio-common-d [ 9386.410046] [drm:chv_dpio_cmn_power_well_enable] Enabled DPIO PHY1 (PHY_CONTROL=0x050007ff) [ 9386.421578] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064 [ 9386.424094] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064 [ 9386.433710] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064 [ 9386.441727] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064 [ 9386.447237] [drm:intel_power_well_disable] disabling dpio-common-d [ 9386.455637] [drm:chv_dpio_cmn_power_well_disable] Disabled DPIO PHY1 (PHY_CONTROL=0x050007fd) [ 9386.464940] [drm:drm_helper_hpd_irq_event] [CONNECTOR:53:DP-2] status updated from disconnected to disconnected [ 9386.464944] [drm:intel_hdmi_detect] [CONNECTOR:55:HDMI-A-2] [ 9386.465437] [drm:gmbus_xfer] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1) [ 9386.465446] [drm:gmbus_xfer] GMBUS [i915 gmbus panel] NAK on first message, retry [ 9386.465762] [drm:gmbus_xfer] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1) [ 9386.465768] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel [ 9386.465774] [drm:drm_helper_hpd_irq_event] [CONNECTOR:55:HDMI-A-2] status updated from disconnected to disconnected [ 9386.466292] [drm:intel_didl_outputs] 10 outputs detected [ 9386.471614] usb 1-5: reset full-speed USB device number 4 using xhci_hcd [ 9386.608886] PM: resume of devices complete after 962.305 msecs [ 9386.610319] PM: Finishing wakeup. [ 9386.610356] Restarting tasks ... [ 9386.612564] [drm:drm_mode_setcrtc] [CRTC:26] [ 9386.612585] [drm:drm_mode_setcrtc] [CONNECTOR:47:eDP-1] [ 9386.612619] [drm:connected_sink_compute_bpp] [CONNECTOR:47:eDP-1] checking for sink bpp constrains [ 9386.612626] [drm:connected_sink_compute_bpp] clamping display bpp (was 30) to EDID reported max of 18 [ 9386.612638] [drm:intel_dp_compute_config] DP link computation with max lane count 1 max bw 270000 pixel clock 75610KHz [ 9386.612647] [drm:intel_dp_compute_config] DP link bw 0a rate select 00 lane count 1 clock 270000 bpp 18 [ 9386.612653] [drm:intel_dp_compute_config] DP link bw required 136098 available 216000 [ 9386.612660] [drm:intel_modeset_pipe_config] hw max bpp: 30, pipe bpp: 18, dithering: 1 [ 9386.612670] [drm:intel_dump_pipe_config] [CRTC:26][modeset] config ffff88004bb43400 for pipe A [ 9386.612675] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 9386.612680] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1 [ 9386.612687] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 9386.612695] [drm:intel_dump_pipe_config] dp: 1, lanes: 1, gmch_m: 2642761, gmch_n: 4194304, link_m: 146820, link_n: 524288, tu: 64 [ 9386.612702] [drm:intel_dump_pipe_config] dp: 1, lanes: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 9386.612708] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 9386.612712] [drm:intel_dump_pipe_config] requested mode: [ 9386.612722] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 75610 1366 1406 1438 1574 768 771 777 800 0x0 0xa [ 9386.612727] [drm:intel_dump_pipe_config] adjusted mode: [ 9386.612736] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 75610 1366 1406 1438 1574 768 771 777 800 0x48 0xa [ 9386.612745] [drm:intel_dump_crtc_timings] crtc timings: 75610 1366 1406 1438 1574 768 771 777 800, type: 0x48 flags: 0xa [ 9386.612750] [drm:intel_dump_pipe_config] port clock: 270000 [ 9386.612755] [drm:intel_dump_pipe_config] pipe src size: 1366x768 [ 9386.612761] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0 [ 9386.612767] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 9386.612773] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 9386.612778] [drm:intel_dump_pipe_config] ips: 0 [ 9386.612783] [drm:intel_dump_pipe_config] double wide: 0 [ 9386.612789] [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0xb0002000, dpll_md: 0x0, fp0: 0x0, fp1: 0x0 [ 9386.612794] [drm:intel_dump_pipe_config] planes on this crtc [ 9386.612801] [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 0.0 idx: 0 enabled [ 9386.612807] [drm:intel_dump_pipe_config] FB:64, fb = 1366x768 format = 0x34325258 [ 9386.612815] [drm:intel_dump_pipe_config] scaler:0 src (0, 0) 0x0 dst (0, 0) 0x0 [ 9386.612822] [drm:intel_dump_pipe_config] CURSOR PLANE:25 plane: 0.1 idx: 1 disabled, scaler_id = 0 [ 9386.612829] [drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 0.1 idx: 2 disabled, scaler_id = 0 [ 9386.612842] [drm:intel_dump_pipe_config] STANDARD PLANE:28 plane: 0.2 idx: 3 disabled, scaler_id = 0 [ 9386.618604] [drm:intel_set_memory_cxsr] memory self-refresh is disabled [ 9386.618644] [drm:chv_phy_powergate_lanes] Power gating DPIO PHY0 CH1 lanes 0xe (PHY_CONTROL=0x150707fd) [ 9386.640651] done. [ 9386.642568] Bluetooth: hci0: read Intel version: 370810011003110e00 [ 9386.642665] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq [ 9386.695053] [drm:edp_panel_on] Turn eDP port C panel power on [ 9386.695063] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 9386.695069] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0008 [ 9386.695072] [drm:wait_panel_status] Wait complete [ 9386.695077] [drm:wait_panel_on] Wait for panel power on [ 9386.695081] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd000b [ 9386.717477] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 9386.717765] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled [ 9386.717970] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled [ 9386.778689] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled [ 9386.778963] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled [ 9386.793174] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 9386.795055] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready [ 9386.810091] r8169 0000:01:00.0 enp1s0: link down [ 9386.810256] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready [ 9386.851380] [drm:wait_panel_status] Wait complete [ 9386.851392] [drm:edp_panel_vdd_off_sync] Turning eDP port C VDD off [ 9386.851401] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0003 [ 9386.851413] [drm:edp_panel_vdd_on] Turning eDP port C VDD on [ 9386.851420] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b [ 9386.855413] [drm:cherryview_enable_rps] GT fifo had a previous error 1080000 [ 9386.881438] [drm:intel_dp_set_signal_levels] Using vswing level 0 [ 9386.881445] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0 [ 9386.882851] [drm:intel_dp_link_training_clock_recovery] clock recovery OK [ 9386.883942] [drm:intel_dp_link_training_channel_equalization] Channel EQ done. DP Training successful [ 9386.884153] [drm:intel_enable_pipe] enabling pipe A [ 9386.884171] [drm:intel_edp_backlight_on] [ 9386.884175] [drm:intel_panel_enable_backlight] pipe A [ 9386.884179] [drm:intel_panel_actually_set_backlight] set backlight PWM = 1562 [ 9386.884188] [drm:intel_psr_enable] PSR not supported by this panel [ 9386.884200] [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511 [ 9386.884209] [drm:vlv_update_wm] Setting FIFO watermarks - A: plane=425, cursor=63, sprite0=0, sprite1=0, SR: plane=0, cursor=0 level=1 cxsr=0 [ 9386.885409] [drm:cherryview_enable_rps] GPLL enabled? yes [ 9386.885415] [drm:cherryview_enable_rps] GPU status: 0x00002010 [ 9386.885418] [drm:cherryview_enable_rps] current GPU freq: 320 MHz (32) [ 9386.885421] [drm:cherryview_enable_rps] setting GPU freq to 320 MHz (32) [ 9386.898282] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 9386.900918] [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511 [ 9386.900931] [drm:vlv_update_wm] Setting FIFO watermarks - A: plane=425, cursor=63, sprite0=0, sprite1=0, SR: plane=1449, cursor=0 level=1 cxsr=1 [ 9386.900935] [drm:intel_set_memory_cxsr] memory self-refresh is enabled [ 9386.917570] [drm:intel_connector_check_state] [CONNECTOR:47:eDP-1] [ 9386.917580] [drm:check_encoder_state] [ENCODER:39:TMDS-39] [ 9386.917586] [drm:check_encoder_state] [ENCODER:43:TMDS-43] [ 9386.917590] [drm:check_encoder_state] [ENCODER:46:TMDS-46] [ 9386.917592] [drm:check_encoder_state] [ENCODER:52:TMDS-52] [ 9386.917595] [drm:check_encoder_state] [ENCODER:54:TMDS-54] [ 9386.917601] [drm:check_crtc_state] [CRTC:26] [ 9386.929438] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=1562/1562 [ 9386.929445] [drm:intel_panel_actually_set_backlight] set backlight PWM = 1562 [ 9386.929646] [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511 [ 9386.929690] [drm:vlv_update_wm] Setting FIFO watermarks - A: plane=425, cursor=0, sprite0=0, sprite1=0, SR: plane=1449, cursor=0 level=1 cxsr=1 [ 9386.930131] [drm:drm_mode_getconnector] [CONNECTOR:47:?] [ 9386.937084] [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511 [ 9386.937097] [drm:vlv_update_wm] Setting FIFO watermarks - A: plane=425, cursor=63, sprite0=0, sprite1=0, SR: plane=1449, cursor=0 level=1 cxsr=1 [ 9386.938595] [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511 [ 9386.938610] [drm:vlv_update_wm] Setting FIFO watermarks - A: plane=425, cursor=0, sprite0=0, sprite1=0, SR: plane=1449, cursor=0 level=1 cxsr=1 [ 9386.970758] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated [ 9389.888995] [drm:edp_panel_vdd_off_sync] Turning eDP port C VDD off [ 9389.889019] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007 [ 9390.397644] wlp2s0: authenticate with 1c:aa:07:ec:1c:e0 [ 9390.401528] wlp2s0: send auth to 1c:aa:07:ec:1c:e0 (try 1/3) [ 9390.404116] wlp2s0: authenticated [ 9390.404421] iwlwifi 0000:02:00.0 wlp2s0: disabling HT as WMM/QoS is not supported by the AP [ 9390.404429] iwlwifi 0000:02:00.0 wlp2s0: disabling VHT as WMM/QoS is not supported by the AP [ 9390.405091] wlp2s0: associate with 1c:aa:07:ec:1c:e0 (try 1/3) [ 9390.407761] wlp2s0: RX AssocResp from 1c:aa:07:ec:1c:e0 (capab=0x411 status=0 aid=1) [ 9390.408501] wlp2s0: associated [ 9390.408585] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready [ 9833.807267] systemd-sysv-generator[4738]: Failed to build name: Invalid argument [ 9838.853243] systemd-sysv-generator[5802]: Failed to build name: Invalid argument [ 9839.209943] systemd-sysv-generator[5832]: Failed to build name: Invalid argument [ 9842.925104] systemd-sysv-generator[5910]: Failed to build name: Invalid argument [ 9843.318237] systemd-sysv-generator[5925]: Failed to build name: Invalid argument [ 9843.655399] systemd-sysv-generator[5955]: Failed to build name: Invalid argument [ 9844.011388] Ebtables v2.0 registered [ 9844.070696] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 9844.226232] Ebtables v2.0 unregistered [ 9844.245167] ip_tables: (C) 2000-2006 Netfilter Core Team [ 9844.304668] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 9844.363596] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 9844.465727] Ebtables v2.0 registered [ 9844.943939] Netfilter messages via NETLINK v0.30. [ 9844.960880] ip_set: protocol 6 [ 9847.026004] systemd-sysv-generator[6199]: Failed to build name: Invalid argument [ 9864.563148] [drm:drm_mode_addfb2] [FB:59] [10288.554492] [drm:i915_gem_open] [10288.629605] [drm:i915_gem_context_create_ioctl] HW context 1 created [10288.630491] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [10288.630502] [drm:i915_pages_create_for_stolen] offset=0x428000, size=16384 [10288.639534] [drm:i915_gem_context_destroy_ioctl] HW context 1 destroyed [12402.372094] wlp2s0: authenticate with 1c:aa:07:ec:1c:e0 [12402.379301] wlp2s0: send auth to 1c:aa:07:ec:1c:e0 (try 1/3) [12402.444738] wlp2s0: send auth to 1c:aa:07:ec:1c:e0 (try 2/3) [12402.514457] wlp2s0: send auth to 1c:aa:07:ec:1c:e0 (try 3/3) [12402.573795] wlp2s0: authentication with 1c:aa:07:ec:1c:e0 timed out [12417.397899] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [12442.945875] wlp2s0: authenticate with 1c:aa:07:ec:1c:e0 [12442.950936] wlp2s0: send auth to 1c:aa:07:ec:1c:e0 (try 1/3) [12442.952742] wlp2s0: authenticated [12442.953012] iwlwifi 0000:02:00.0 wlp2s0: disabling HT as WMM/QoS is not supported by the AP [12442.953017] iwlwifi 0000:02:00.0 wlp2s0: disabling VHT as WMM/QoS is not supported by the AP [12442.953727] wlp2s0: associate with 1c:aa:07:ec:1c:e0 (try 1/3) [12442.957005] wlp2s0: RX AssocResp from 1c:aa:07:ec:1c:e0 (capab=0x411 status=0 aid=3) [12442.958407] wlp2s0: associated [12442.958479] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready [12443.363768] wlp2s0: deauthenticating from 1c:aa:07:ec:1c:e0 by local choice (Reason: 3=DEAUTH_LEAVING) [12443.436567] wlp2s0: authenticate with 1c:aa:07:ec:1c:e0 [12443.443792] wlp2s0: send auth to 1c:aa:07:ec:1c:e0 (try 1/3) [12443.446148] wlp2s0: authenticated [12443.447846] iwlwifi 0000:02:00.0 wlp2s0: disabling HT as WMM/QoS is not supported by the AP [12443.447853] iwlwifi 0000:02:00.0 wlp2s0: disabling VHT as WMM/QoS is not supported by the AP [12443.451860] wlp2s0: associate with 1c:aa:07:ec:1c:e0 (try 1/3) [12443.454903] wlp2s0: RX AssocResp from 1c:aa:07:ec:1c:e0 (capab=0x411 status=0 aid=3) [12443.456548] wlp2s0: associated [12559.183458] [drm:drm_mode_addfb2] [FB:65] [12675.339139] [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511 [12675.339151] [drm:vlv_update_wm] Setting FIFO watermarks - A: plane=425, cursor=63, sprite0=0, sprite1=0, SR: plane=1449, cursor=0 level=1 cxsr=1 [12675.339829] [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511 [12675.339839] [drm:vlv_update_wm] Setting FIFO watermarks - A: plane=425, cursor=0, sprite0=0, sprite1=0, SR: plane=1449, cursor=0 level=1 cxsr=1 [12771.954745] [drm:drm_mode_addfb2] [FB:63] [12793.163558] [drm:drm_mode_addfb2] [FB:65] [12808.118166] [drm:drm_mode_addfb2] [FB:63] [13002.558223] [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511 [13002.558403] [drm:vlv_update_wm] Setting FIFO watermarks - A: plane=425, cursor=63, sprite0=0, sprite1=0, SR: plane=1449, cursor=0 level=1 cxsr=1 [13067.463100] [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511 [13067.463127] [drm:vlv_update_wm] Setting FIFO watermarks - A: plane=425, cursor=0, sprite0=0, sprite1=0, SR: plane=1449, cursor=0 level=1 cxsr=1 [13093.483016] [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511 [13093.483033] [drm:vlv_update_wm] Setting FIFO watermarks - A: plane=425, cursor=63, sprite0=0, sprite1=0, SR: plane=1449, cursor=0 level=1 cxsr=1 [13138.517106] [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511 [13138.517126] [drm:vlv_update_wm] Setting FIFO watermarks - A: plane=425, cursor=0, sprite0=0, sprite1=0, SR: plane=1449, cursor=0 level=1 cxsr=1 [13228.163931] [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511 [13228.163958] [drm:vlv_update_wm] Setting FIFO watermarks - A: plane=425, cursor=63, sprite0=0, sprite1=0, SR: plane=1449, cursor=0 level=1 cxsr=1 [13299.053056] [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511 [13299.053083] [drm:vlv_update_wm] Setting FIFO watermarks - A: plane=425, cursor=0, sprite0=0, sprite1=0, SR: plane=1449, cursor=0 level=1 cxsr=1 [13327.497722] [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511 [13327.497765] [drm:vlv_update_wm] Setting FIFO watermarks - A: plane=425, cursor=63, sprite0=0, sprite1=0, SR: plane=1449, cursor=0 level=1 cxsr=1 [13341.177066] [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511 [13341.177089] [drm:vlv_update_wm] Setting FIFO watermarks - A: plane=425, cursor=0, sprite0=0, sprite1=0, SR: plane=1449, cursor=0 level=1 cxsr=1 [13651.058764] SGI XFS with ACLs, security attributes, realtime, no debug enabled [13651.074830] JFS: nTxBlock = 8192, nTxLock = 65536 [13651.100011] ntfs: driver 2.1.32 [Flags: R/O MODULE]. [13651.150692] QNX4 filesystem 0.2.3 registered. [13651.253430] raid6: sse2x1 gen() 1681 MB/s [13651.321534] raid6: sse2x1 xor() 2319 MB/s [13651.389477] raid6: sse2x2 gen() 2614 MB/s [13651.457574] raid6: sse2x2 xor() 2575 MB/s [13651.525534] raid6: sse2x4 gen() 3860 MB/s [13651.593558] raid6: sse2x4 xor() 2147 MB/s [13651.593561] raid6: using algorithm sse2x4 gen() 3860 MB/s [13651.593566] raid6: .... xor() 2147 MB/s, rmw enabled [13651.593568] raid6: using ssse3x2 recovery algorithm [13651.603952] xor: measuring software checksum speed [13651.641570] prefetch64-sse: 7239.000 MB/sec [13651.681586] generic_sse: 6523.000 MB/sec [13651.681589] xor: using function: prefetch64-sse (7239.000 MB/sec) [13651.732050] Btrfs loaded