| 2007-10-13 22:42:57 |
Max |
description |
In the rc release of gutsy at startup I can see the grub but just after that the screen become black (I haven't the "scrollbars")...
I am obligated to dial Alt+F1 and, after that, the startup begin ... and say to me that a kernel module (iwlwifi ??) doesn't work ...
After that all it's OK .
[code]
$ dmesg | grep wifi
[ 55.356000] iwlwifi_rc80211_simple: Unknown symbol iwlwifi_ieee80211_rate_control_unregister
[ 55.356000] iwlwifi_rc80211_simple: Unknown symbol iwlwifi_sta_info_put
[ 55.356000] iwlwifi_rc80211_simple: Unknown symbol iwlwifi_sta_info_get
[ 55.356000] iwlwifi_rc80211_simple: Unknown symbol iwlwifi_ieee80211_rate_control_register
[\code]
[code]
$ dmesg
[ 0.000000] Linux version 2.6.22-14-generic (buildd@vernadsky) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Wed Oct 10 06:00:47 GMT 2007 (Ubuntu 2.6.22-14.43-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d8000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003fef0000 (usable)
[ 0.000000] BIOS-e820: 000000003fef0000 - 000000003fefb000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003fefb000 - 000000003ff00000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved)
[ 0.000000] 126MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f82d0
[ 0.000000] Entering add_active_range(0, 0, 261872) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 261872
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 261872
[ 0.000000] On node 0 totalpages: 261872
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 253 pages used for memmap
[ 0.000000] HighMem zone: 32243 pages, LIFO batch:7
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F8360 checksum 0
[ 0.000000] ACPI: RSDP 000F8360, 0014 (r0 PTLTD )
[ 0.000000] ACPI: RSDT 3FEF6B8F, 0030 (r1 Arima 161Fh 6040000 LTP 0)
[ 0.000000] ACPI: FACP 3FEFAE87, 0074 (r1 Arima 161Fh 6040000 PTL_ F4240)
[ 0.000000] ACPI: DSDT 3FEF6BBF, 42C8 (r1 Arima 161Fh 6040000 MSFT 100000E)
[ 0.000000] ACPI: FACS 3FEFBFC0, 0040
[ 0.000000] ACPI: SSDT 3FEFAEFB, 00B5 (r1 PTLTD POWERNOW 6040000 LTP 1)
[ 0.000000] ACPI: APIC 3FEFAFB0, 0050 (r1 PTLTD APIC 6040000 LTP 0)
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:4 APIC version 16
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ10 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bffe0000)
[ 0.000000] Built 1 zonelists. Total pages: 259827
[ 0.000000] Kernel command line: root=UUID=36ead484-fe11-4e7f-9c38-b8cb4c49dc41 ro quiet splash locale=fr_FR
[ 0.000000] mapped APIC to ffffd000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffc000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 1603.741 MHz processor.
[ 9.645196] Console: colour VGA+ 80x25
[ 9.645911] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 9.646470] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 9.673496] Memory: 1026872k/1047488k available (2015k kernel code, 19928k reserved, 916k data, 364k init, 129984k highmem)
[ 9.673508] virtual kernel memory layout:
[ 9.673510] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB)
[ 9.673511] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 9.673513] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 9.673514] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 9.673516] .init : 0xc03e3000 - 0xc043e000 ( 364 kB)
[ 9.673517] .data : 0xc02f7d26 - 0xc03dce84 ( 916 kB)
[ 9.673519] .text : 0xc0100000 - 0xc02f7d26 (2015 kB)
[ 9.673522] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 9.673563] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 9.753524] Calibrating delay using timer specific routine.. 3210.45 BogoMIPS (lpj=6420909)
[ 9.753555] Security Framework v1.0.0 initialized
[ 9.753564] SELinux: Disabled at boot.
[ 9.753580] Mount-cache hash table entries: 512
[ 9.753740] CPU: After generic identify, caps: 078bfbff e1d3fbff 00000000 00000000 00000000 00000000 00000000
[ 9.753750] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 9.753753] CPU: L2 Cache: 1024K (64 bytes/line)
[ 9.753756] CPU: After all inits, caps: 078bfbff e1d3fbff 00000000 00000410 00000000 00000000 00000000
[ 9.753770] Compat vDSO mapped to ffffe000.
[ 9.753785] Checking 'hlt' instruction... OK.
[ 9.769678] SMP alternatives: switching to UP code
[ 9.769949] Freeing SMP alternatives: 11k freed
[ 9.770290] Early unpacking initramfs... done
[ 10.132571] ACPI: Core revision 20070126
[ 10.132645] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 10.135234] CPU0: AMD Mobile AMD Athlon(tm) 64 Processor 2800+ stepping 0a
[ 10.135255] Total of 1 processors activated (3210.45 BogoMIPS).
[ 10.135750] ENABLING IO-APIC IRQs
[ 10.136054] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0
[ 10.281153] Brought up 1 CPUs
[ 10.281307] Booting paravirtualized kernel on bare hardware
[ 10.281382] Time: 21:49:44 Date: 09/13/107
[ 10.281404] NET: Registered protocol family 16
[ 10.281486] EISA bus registered
[ 10.281500] ACPI: bus type pci registered
[ 10.287619] PCI: PCI BIOS revision 2.10 entry at 0xfd8cc, last bus=1
[ 10.287621] PCI: Using configuration type 1
[ 10.287624] Setting up standard PCI resources
[ 10.289166] ACPI: EC: Look up EC in DSDT
[ 10.289958] ACPI: EC: GPE=0x01, ports=0x66, 0x62
[ 10.291791] ACPI: Interpreter enabled
[ 10.291794] ACPI: (supports S0 S3 S4 S5)
[ 10.291805] ACPI: Using IOAPIC for interrupt routing
[ 10.295862] ACPI: EC: GPE=0x01, ports=0x66, 0x62
[ 10.295896] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 10.295903] PCI: Probing PCI hardware (bus 00)
[ 10.296250] PCI quirk: region 4000-407f claimed by vt8235 PM
[ 10.296254] PCI quirk: region 8100-810f claimed by vt8235 SMB
[ 10.296618] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 10.302260] ACPI: PCI Interrupt Link [ALKA] (IRQs 16 17 18 19 20 21 22 23) *9, disabled.
[ 10.302333] ACPI: PCI Interrupt Link [ALKB] (IRQs 23) *11, disabled.
[ 10.302401] ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *10, disabled.
[ 10.302468] ACPI: PCI Interrupt Link [ALKD] (IRQs 21) *10, disabled.
[ 10.302560] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *9 12 14 15)
[ 10.302650] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 *11 12 14 15)
[ 10.302739] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 11 12 14 15) *10
[ 10.302831] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 10.302908] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 10.302917] pnp: PnP ACPI init
[ 10.302924] ACPI: bus type pnp registered
[ 10.304729] pnp: PnP ACPI: found 9 devices
[ 10.304731] ACPI: ACPI bus type pnp unregistered
[ 10.304735] PnPBIOS: Disabled by ACPI PNP
[ 10.304773] PCI: Using ACPI for IRQ routing
[ 10.304776] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 10.307577] NET: Registered protocol family 8
[ 10.307579] NET: Registered protocol family 20
[ 10.307630] pnp: 00:05: iomem range 0x0-0x9ffff could not be reserved
[ 10.307634] pnp: 00:05: iomem range 0xe0000-0xfffff could not be reserved
[ 10.307638] pnp: 00:05: iomem range 0xfff00000-0xffffffff could not be reserved
[ 10.307642] pnp: 00:05: iomem range 0xffee0000-0xffefffff has been reserved
[ 10.307647] pnp: 00:06: ioport range 0x4d0-0x4d1 has been reserved
[ 10.307650] pnp: 00:06: ioport range 0xf510-0xf511 has been reserved
[ 10.307657] pnp: 00:06: ioport range 0xf500-0xf500 has been reserved
[ 10.307660] pnp: 00:06: ioport range 0x4000-0x407f has been reserved
[ 10.307664] pnp: 00:06: ioport range 0x8100-0x811f could not be reserved
[ 10.309096] Time: tsc clocksource has been installed.
[ 10.337895] PCI: Bridge: 0000:00:01.0
[ 10.337897] IO window: 2000-2fff
[ 10.337902] MEM window: d0100000-d01fffff
[ 10.337906] PREFETCH window: d8000000-dfffffff
[ 10.337910] PCI: Bus 2, cardbus bridge: 0000:00:0a.0
[ 10.337913] IO window: 00003000-000030ff
[ 10.337916] IO window: 00003400-000034ff
[ 10.337921] PREFETCH window: 50000000-53ffffff
[ 10.337925] MEM window: 54000000-57ffffff
[ 10.337939] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 10.337983] ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 17 (level, low) -> IRQ 16
[ 10.338000] NET: Registered protocol family 2
[ 10.377080] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 10.377221] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
[ 10.379193] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 10.379900] TCP: Hash tables configured (established 131072 bind 65536)
[ 10.379903] TCP reno registered
[ 10.389193] checking if image is initramfs... it is
[ 10.840686] Switched to high resolution mode on CPU 0
[ 11.099515] Freeing initrd memory: 7063k freed
[ 11.099939] audit: initializing netlink socket (disabled)
[ 11.099955] audit(1192312184.032:1): initialized
[ 11.100023] highmem bounce pool size: 64 pages
[ 11.101693] VFS: Disk quotas dquot_6.5.1
[ 11.101740] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 11.101827] io scheduler noop registered
[ 11.101830] io scheduler anticipatory registered
[ 11.101832] io scheduler deadline registered
[ 11.101847] io scheduler cfq registered (default)
[ 11.101858] PCI: VIA PCI bridge detected. Disabling DAC.
[ 11.101917] Boot video device is 0000:01:00.0
[ 11.102050] isapnp: Scanning for PnP cards...
[ 11.455759] isapnp: No Plug & Play device found
[ 11.477557] Real Time Clock Driver v1.12ac
[ 11.477644] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 11.478614] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 11.478798] input: Macintosh mouse button emulation as /class/input/input0
[ 11.478863] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 11.482476] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 11.482482] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 11.482624] mice: PS/2 mouse device common for all mice
[ 11.482717] EISA: Probing bus 0 at eisa.0
[ 11.482725] Cannot allocate resource for EISA slot 1
[ 11.482729] Cannot allocate resource for EISA slot 2
[ 11.482731] Cannot allocate resource for EISA slot 3
[ 11.482734] Cannot allocate resource for EISA slot 4
[ 11.482752] EISA: Detected 0 cards.
[ 11.482848] TCP cubic registered
[ 11.482862] NET: Registered protocol family 1
[ 11.482885] Using IPI No-Shortcut mode
[ 11.483048] Magic number: 11:18:854
[ 11.483138] hash matches device ptyv6
[ 11.483697] Freeing unused kernel memory: 364k freed
[ 11.524126] input: AT Translated Set 2 keyboard as /class/input/input1
[ 12.733497] AppArmor: AppArmor initialized<5>audit(1192312185.532:2): type=1505 info="AppArmor initialized" pid=1185
[ 12.849990] fuse init (API version 7.8)
[ 12.956011] Failure registering capabilities with primary security module.
[ 13.063800] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 23.290012] usbcore: registered new interface driver usbfs
[ 23.290053] usbcore: registered new interface driver hub
[ 23.290076] usbcore: registered new device driver usb
[ 23.290774] USB Universal Host Controller Interface driver v3.0
[ 23.290946] ACPI: PCI Interrupt Link [ALKD] disabled and referenced, BIOS bug
[ 23.291003] ACPI: PCI Interrupt Link [ALKD] BIOS reported IRQ 0, using IRQ 21
[ 23.291006] ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 21
[ 23.291016] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKD] -> GSI 21 (level, low) -> IRQ 17
[ 23.291029] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 23.291206] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[ 23.291238] uhci_hcd 0000:00:10.0: irq 17, io base 0x00001c80
[ 23.291374] usb usb1: configuration #1 chosen from 1 choice
[ 23.291405] hub 1-0:1.0: USB hub found
[ 23.291416] hub 1-0:1.0: 2 ports detected
[ 23.394055] ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [ALKD] -> GSI 21 (level, low) -> IRQ 17
[ 23.394065] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 23.394085] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[ 23.394105] uhci_hcd 0000:00:10.1: irq 17, io base 0x00001ca0
[ 23.394202] usb usb2: configuration #1 chosen from 1 choice
[ 23.394225] hub 2-0:1.0: USB hub found
[ 23.394232] hub 2-0:1.0: 2 ports detected
[ 23.497983] ACPI: PCI Interrupt 0000:00:10.2[C] -> Link [ALKD] -> GSI 21 (level, low) -> IRQ 17
[ 23.497998] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 23.498026] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[ 23.498050] uhci_hcd 0000:00:10.2: irq 17, io base 0x00001cc0
[ 23.498153] usb usb3: configuration #1 chosen from 1 choice
[ 23.498184] hub 3-0:1.0: USB hub found
[ 23.498193] hub 3-0:1.0: 2 ports detected
[ 23.633783] usb 1-1: new low speed USB device using uhci_hcd and address 2
[ 23.639069] ACPI: PCI Interrupt 0000:00:10.3[D] -> Link [ALKD] -> GSI 21 (level, low) -> IRQ 17
[ 23.639083] ehci_hcd 0000:00:10.3: EHCI Host Controller
[ 23.639117] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
[ 23.639164] ehci_hcd 0000:00:10.3: irq 17, io mem 0xd0002800
[ 23.639171] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 23.639272] usb usb4: configuration #1 chosen from 1 choice
[ 23.639301] hub 4-0:1.0: USB hub found
[ 23.639310] hub 4-0:1.0: 6 ports detected
[ 23.662653] SCSI subsystem initialized
[ 23.667405] libata version 2.21 loaded.
[ 23.746321] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 23.746327] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 23.746872] VP_IDE: IDE controller at PCI slot 0000:00:11.1
[ 23.747021] ACPI: PCI Interrupt Link [ALKA] disabled and referenced, BIOS bug
[ 23.747077] ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 23
[ 23.747080] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 23
[ 23.747090] ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [ALKA] -> GSI 23 (level, low) -> IRQ 18
[ 23.747103] VP_IDE: chipset revision 6
[ 23.747105] VP_IDE: not 100% native mode: will probe irqs later
[ 23.747117] VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
[ 23.747127] ide0: BM-DMA at 0x1ce0-0x1ce7, BIOS settings: hda:DMA, hdb:pio
[ 23.747142] ide1: BM-DMA at 0x1ce8-0x1cef, BIOS settings: hdc:DMA, hdd:pio
[ 23.747150] Probing IDE interface ide0...
[ 23.811532] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[ 24.161393] hda: SAMSUNG MP0603H, ATA DISK drive
[ 24.833010] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 24.892675] usb 1-1: new low speed USB device using uhci_hcd and address 3
[ 25.059559] usb 1-1: configuration #1 chosen from 1 choice
[ 25.075234] usbcore: registered new interface driver hiddev
[ 25.088699] input: USB Mouse as /class/input/input2
[ 25.088835] input: USB HID v1.10 Mouse [USB Mouse] on usb-0000:00:10.0-1
[ 25.088846] usbcore: registered new interface driver usbhid
[ 25.088850] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 25.271052] Probing IDE interface ide1...
[ 26.131711] hdc: TOSHIBA ODD-DVD SD-R6372, ATAPI CD/DVD-ROM drive
[ 26.828268] ide1 at 0x170-0x177,0x376 on irq 15
[ 26.840172] ACPI: PCI Interrupt Link [ALKB] disabled and referenced, BIOS bug
[ 26.840224] ACPI: PCI Interrupt Link [ALKB] BIOS reported IRQ 0, using IRQ 23
[ 26.840228] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 23
[ 26.840232] ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [ALKB] -> GSI 23 (level, low) -> IRQ 18
[ 26.844367] eth0: VIA Rhine II at 0x11800, 00:03:25:10:e2:58, IRQ 18.
[ 26.845080] eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 41e1.
[ 26.845181] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 19
[ 26.898202] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19] MMIO=[d0002000-d00027ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 26.910885] hda: max request size: 512KiB
[ 26.919183] hda: 117304992 sectors (60060 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100)
[ 26.919583] hda: cache flushes supported
[ 26.919620] hda: hda1 hda2 hda3 hda4
[ 27.064827] hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
[ 27.064838] Uniform CD-ROM driver Revision: 3.20
[ 28.173976] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0003252136001a9d]
[ 28.659243] Attempting manual resume
[ 28.659247] swsusp: Resume From Partition 3:2
[ 28.659249] PM: Checking swsusp image.
[ 28.757381] PM: Resume from disk failed.
[ 29.268987] kjournald starting. Commit interval 5 seconds
[ 29.269000] EXT3-fs: mounted filesystem with ordered data mode.
[ 48.068000] Marking TSC unstable due to: possible TSC halt in C2.
[ 48.072000] Time: acpi_pm clocksource has been installed.
[ 52.552000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 52.620000] Netfilter messages via NETLINK v0.30.
[ 52.640000] nf_conntrack version 0.5.0 (8183 buckets, 65464 max)
[ 53.080000] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[ 54.540000] Yenta: CardBus bridge found at 0000:00:0a.0 [161f:2032]
[ 54.540000] Yenta: Using CSCINT to route CSC interrupts to PCI
[ 54.540000] Yenta: Routing CardBus interrupts to PCI
[ 54.540000] Yenta TI: socket 0000:00:0a.0, mfunc 0x01001002, devctl 0x44
[ 54.632000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 54.656000] NET: Registered protocol family 17
[ 54.684000] irda_init()
[ 54.684000] NET: Registered protocol family 23
[ 54.732000] Linux agpgart interface v0.102 (c) Dave Jones
[ 54.772000] Yenta: ISA IRQ mask 0x0820, PCI irq 16
[ 54.772000] Socket status: 30000006
[ 54.772000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 54.864000] ACPI: PCI Interrupt 0000:00:0c.0[A] -> GSI 18 (level, low) -> IRQ 20
[ 55.340000] ieee80211_init: failed to initialize WME (err=-17)
[ 55.356000] iwlwifi_rc80211_simple: Unknown symbol iwlwifi_ieee80211_rate_control_unregister
[ 55.356000] iwlwifi_rc80211_simple: Unknown symbol iwlwifi_sta_info_put
[ 55.356000] iwlwifi_rc80211_simple: Unknown symbol iwlwifi_sta_info_get
[ 55.356000] iwlwifi_rc80211_simple: Unknown symbol iwlwifi_ieee80211_rate_control_register
[ 55.356000] wmaster0: Selected rate control algorithm 'simple'
[ 55.864000] input: PC Speaker as /class/input/input3
[ 55.920000] agpgart: Detected AGP bridge 0
[ 55.932000] agpgart: AGP aperture is 256M @ 0xe0000000
[ 56.168000] ACPI: PCI Interrupt Link [ALKC] disabled and referenced, BIOS bug
[ 56.168000] ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22
[ 56.168000] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
[ 56.168000] ACPI: PCI Interrupt 0000:00:11.6[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 21
[ 56.172000] PCI: Setting latency timer of device 0000:00:11.6 to 64
[ 56.352000] cs: IO port probe 0x100-0x3af: clean.
[ 56.352000] cs: IO port probe 0x3e0-0x4ff: clean.
[ 56.356000] cs: IO port probe 0x820-0x8ff: clean.
[ 56.356000] cs: IO port probe 0xc00-0xcf7: clean.
[ 56.356000] cs: IO port probe 0xa00-0xaff: clean.
[ 56.436000] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x236eb3, caps: 0x904713/0x10008
[ 56.472000] input: SynPS/2 Synaptics TouchPad as /class/input/input4
[ 56.680000] ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 21
[ 56.680000] PCI: Setting latency timer of device 0000:00:11.5 to 64
[ 58.428000] lp: driver loaded but no devices found
[ 58.508000] Adding 498004k swap on /dev/hda2. Priority:-1 extents:1 across:498004k
[ 59.100000] EXT3 FS on hda3, internal journal
[ 60.904000] kjournald starting. Commit interval 5 seconds
[ 60.904000] EXT3 FS on hda1, internal journal
[ 60.904000] EXT3-fs: mounted filesystem with ordered data mode.
[ 61.032000] NET: Registered protocol family 10
[ 61.032000] lo: Disabled Privacy Extensions
[ 61.064000] kjournald starting. Commit interval 5 seconds
[ 61.064000] EXT3 FS on hda4, internal journal
[ 61.064000] EXT3-fs: mounted filesystem with ordered data mode.
[ 65.336000] ACPI: Battery Slot [BAT0] (battery present)
[ 65.528000] input: Power Button (FF) as /class/input/input5
[ 65.536000] ACPI: Power Button (FF) [PWRF]
[ 65.576000] input: Power Button (CM) as /class/input/input6
[ 65.576000] ACPI: Power Button (CM) [PWRB]
[ 65.596000] input: Sleep Button (CM) as /class/input/input7
[ 65.596000] ACPI: Sleep Button (CM) [SLPB]
[ 65.608000] input: Lid Switch as /class/input/input8
[ 65.608000] ACPI: Lid Switch [LID]
[ 65.704000] No dock devices found.
[ 65.760000] ACPI: AC Adapter [AC] (on-line)
[ 65.776000] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 66.064000] powernow-k8: Found 1 Mobile AMD Athlon(tm) 64 Processor 2800+ processors (version 2.00.00)
[ 66.064000] powernow-k8: 0 : fid 0x8 (1600 MHz), vid 0x6
[ 66.064000] powernow-k8: 1 : fid 0x0 (800 MHz), vid 0x18
[ 66.592000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 66.592000] apm: overridden by ACPI.
[ 66.944000] input: Unspecified device as /class/input/input9
[ 66.952000] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 68.448000] [drm] Initialized drm 1.1.0 20060810
[ 68.480000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 22
[ 68.480000] [drm] Initialized radeon 1.27.0 20060524 on minor 0
[ 69.560000] Clocksource tsc unstable (delta = -192001516 ns)
[ 69.932000] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
[ 69.932000] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[ 69.932000] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[ 71.036000] eth0: no IPv6 routers present
[ 71.148000] [drm] Setting GART location based on new memory map
[ 71.148000] [drm] Loading R300 Microcode
[ 71.148000] [drm] writeback test succeeded in 1 usecs
[ 642.468000] Inbound IN=eth0 OUT= MAC=00:03:25:10:e2:58:00:e0:18:d2:cc:c9:08:00 SRC=193.48.225.249 DST=193.48.225.144 LEN=44 TOS=0x00 PREC=0x00 TTL=49 ID=41785 PROTO=TCP SPT=33540 DPT=21 WINDOW=2048 RES=0x00 SYN URGP=0
[ 642.528000] Inbound IN=eth0 OUT= MAC=00:03:25:10:e2:58:00:e0:18:d2:cc:c9:08:00 SRC=193.48.225.249 DST=193.48.225.144 LEN=44 TOS=0x00 PREC=0x00 TTL=44 ID=32730 PROTO=TCP SPT=33541 DPT=21 WINDOW=1024 RES=0x00 SYN URGP=0
[ 968.092000] Inbound IN=eth0 OUT= MAC=00:03:25:10:e2:58:00:e0:18:d2:cc:c9:08:00 SRC=193.48.225.249 DST=193.48.225.144 LEN=44 TOS=0x00 PREC=0x00 TTL=52 ID=49874 PROTO=TCP SPT=40199 DPT=21 WINDOW=1024 RES=0x00 SYN URGP=0
[ 968.152000] Inbound IN=eth0 OUT= MAC=00:03:25:10:e2:58:00:e0:18:d2:cc:c9:08:00 SRC=193.48.225.249 DST=193.48.225.144 LEN=44 TOS=0x00 PREC=0x00 TTL=48 ID=10017 PROTO=TCP SPT=40200 DPT=21 WINDOW=1024 RES=0x00 SYN URGP=0
[ 1236.316000] Inbound IN=eth0 OUT= MAC=00:03:25:10:e2:58:00:e0:18:d2:cc:c9:08:00 SRC=193.48.225.249 DST=193.48.225.144 LEN=44 TOS=0x00 PREC=0x00 TTL=44 ID=26359 PROTO=TCP SPT=52403 DPT=21 WINDOW=1024 RES=0x00 SYN URGP=0
[ 1236.376000] Inbound IN=eth0 OUT= MAC=00:03:25:10:e2:58:00:e0:18:d2:cc:c9:08:00 SRC=193.48.225.249 DST=193.48.225.144 LEN=44 TOS=0x00 PREC=0x00 TTL=39 ID=5004 PROTO=TCP SPT=52404 DPT=21 WINDOW=4096 RES=0x00 SYN URGP=0
[ 1836.632000] Inbound IN=eth0 OUT= MAC=00:03:25:10:e2:58:00:e0:18:d2:cc:c9:08:00 SRC=193.48.225.249 DST=193.48.225.144 LEN=44 TOS=0x00 PREC=0x00 TTL=48 ID=24864 PROTO=TCP SPT=43906 DPT=21 WINDOW=1024 RES=0x00 SYN URGP=0
[ 1836.692000] Inbound IN=eth0 OUT= MAC=00:03:25:10:e2:58:00:e0:18:d2:cc:c9:08:00 SRC=193.48.225.249 DST=193.48.225.144 LEN=44 TOS=0x00 PREC=0x00 TTL=37 ID=37951 PROTO=TCP SPT=43907 DPT=21 WINDOW=2048 RES=0x00 SYN URGP=0
[ 2436.688000] Inbound IN=eth0 OUT= MAC=00:03:25:10:e2:58:00:e0:18:d2:cc:c9:08:00 SRC=193.48.225.249 DST=193.48.225.144 LEN=44 TOS=0x00 PREC=0x00 TTL=59 ID=51982 PROTO=TCP SPT=46841 DPT=21 WINDOW=4096 RES=0x00 SYN URGP=0
[ 2436.748000] Inbound IN=eth0 OUT= MAC=00:03:25:10:e2:58:00:e0:18:d2:cc:c9:08:00 SRC=193.48.225.249 DST=193.48.225.144 LEN=44 TOS=0x00 PREC=0x00 TTL=51 ID=62419 PROTO=TCP SPT=46842 DPT=21 WINDOW=4096 RES=0x00 SYN URGP=0[\code] |
In the rc release of gutsy at startup I can see the grub but just after that the screen become black (I haven't the "scrollbars")...
I am obligated to dial Alt+F1 and, after that, the startup begin ... and say to me that a kernel module (iwlwifi ??) doesn't work ...
After that all it's OK .
$ dmesg | grep wifi
[ 55.356000] iwlwifi_rc80211_simple: Unknown symbol iwlwifi_ieee80211_rate_control_unregister
[ 55.356000] iwlwifi_rc80211_simple: Unknown symbol iwlwifi_sta_info_put
[ 55.356000] iwlwifi_rc80211_simple: Unknown symbol iwlwifi_sta_info_get
[ 55.356000] iwlwifi_rc80211_simple: Unknown symbol iwlwifi_ieee80211_rate_control_register
In attachment, my dmesg |
|
