Fuji Finepix F47 camera usb disk not properly mounted

[Marcus Granado]

After plugging my Fujifilm Finepix F47 usb camera, Ubuntu 7.04 shows up the Camera Import dialog, says it is a USB PTP Class Camera, and even lists the thumbnails of its content, but it does not mount a disk which can be accessed in Nautilus.

Reproduction: Always.

user@box:~$ sudo lsusb
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 002: ID 0ace:1201 ZyDAS 802.11b WiFi
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 004: ID 04cb:01d5 Fuji Photo Film Co., Ltd
Bus 001 Device 003: ID 0dbf:021b Quik Tech Solutions
Bus 001 Device 001: ID 0000:0000

user@box:~$ sudo lsusb -vv -d 04cb:01d5

Bus 001 Device 004: ID 04cb:01d5 Fuji Photo Film Co., Ltd
Device Descriptor:
  bLength 18
  bDescriptorType 1
  bcdUSB 2.00
  bDeviceClass 0 (Defined at Interface level)
  bDeviceSubClass 0
  bDeviceProtocol 0
  bMaxPacketSize0 64
  idVendor 0x04cb Fuji Photo Film Co., Ltd
  idProduct 0x01d5
  bcdDevice 1.00
  iManufacturer 0
  iProduct 2 USB PTP Camera
  iSerial 3 592D3136353307052391D330122785
  bNumConfigurations 1
  Configuration Descriptor:
    bLength 9
    bDescriptorType 2
    wTotalLength 39
    bNumInterfaces 1
    bConfigurationValue 1
    iConfiguration 0
    bmAttributes 0xc0
      Self Powered
    MaxPower 50mA
    Interface Descriptor:
      bLength 9
      bDescriptorType 4
      bInterfaceNumber 0
      bAlternateSetting 0
      bNumEndpoints 3
      bInterfaceClass 6 Imaging
      bInterfaceSubClass 1 Still Image Capture
      bInterfaceProtocol 1 Picture Transfer Protocol (PIMA 15470)
      iInterface 0
      Endpoint Descriptor:
        bLength 7
        bDescriptorType 5
        bEndpointAddress 0x01 EP 1 OUT
        bmAttributes 2
          Transfer Type Bulk
          Synch Type None
          Usage Type Data
        wMaxPacketSize 0x0200 1x 512 bytes
        bInterval 1
      Endpoint Descriptor:
        bLength 7
        bDescriptorType 5
        bEndpointAddress 0x82 EP 2 IN
        bmAttributes 2
          Transfer Type Bulk
          Synch Type None
          Usage Type Data
        wMaxPacketSize 0x0200 1x 512 bytes
        bInterval 0
      Endpoint Descriptor:
        bLength 7
        bDescriptorType 5
        bEndpointAddress 0x83 EP 3 IN
        bmAttributes 3
          Transfer Type Interrupt
          Synch Type None
          Usage Type Data
        wMaxPacketSize 0x0020 1x 32 bytes
        bInterval 11
Device Qualifier (for other device speed):
  bLength 10
  bDescriptorType 6
  bcdUSB 2.00
  bDeviceClass 0 (Defined at Interface level)
  bDeviceSubClass 0
  bDeviceProtocol 0
  bMaxPacketSize0 64
  bNumConfigurations 1
Device Status: 0x0001
  Self Powered

[Brian Murray (brian-murray)]

Thank you for taking the time to report this bug and helping to make Ubuntu better. You reported this bug a while ago and there hasn't been any activity in recently. We were wondering if this is still an issue for you? Thanks in advance.

[Marcus Granado (mrc-gran)]

As of Gutsy, Nautilus cannot yet directly access the contents of any USB PTP Class Camera. (this fact is not restricted to a Fujifilm Finepix F47 camera.) I need to use F-Spot photo manager to first import the pictures from the camera to the local filesystem instead, but I see this as an annoyance. Maybe this report is better described as an enhancement to Nautilus. While importing, F-Spot seems to mount the contents of the ptp camera in /store_10000001/, but this mount point is never accessible to Nautilus.

[Martin Pitt (pitti)]

PTP cameras cannot be mounted like a hard disk, you have to use libgphoto (usually a frontend like gthumb, F-spot, or Kamera) to talk to it. Only cameras which provide an 'USB mass storage' interface can be mounted.

[miguel (migueldemalaga)]

i have an finepix S5700 and i cant import any photo whith gthumb or f-spot and no icon have in desktop when in plug in my camera. Always has recogniced like camera ptp but now in HARDY BETA dont work.
miguel@miguel-desktop:~$ lsusb
Bus 005 Device 001: ID 0000:0000
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 005: ID 04cb:01c4 Fuji Photo Film Co., Ltd
Bus 003 Device 002: ID 046d:0870 Logitech, Inc. QuickCam Express
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 004: ID 045e:007d Microsoft Corp. Notebook Optical Mouse
Bus 001 Device 001: ID 0000:0000
miguel@miguel-desktop:~$ lsusb -vv -d 04cb:01c4

Bus 003 Device 005: ID 04cb:01c4 Fuji Photo Film Co., Ltd
Device Descriptor:
  bLength 18
  bDescriptorType 1
  bcdUSB 2.00
  bDeviceClass 0 (Defined at Interface level)
  bDeviceSubClass 0
  bDeviceProtocol 0
  bMaxPacketSize0 64
  idVendor 0x04cb Fuji Photo Film Co., Ltd
  idProduct 0x01c4
  bcdDevice 1.00
  iManufacturer 1
  iProduct 2
  iSerial 3
  bNumConfigurations 1
  Configuration Descriptor:
    bLength 9
    bDescriptorType 2
    wTotalLength 39
    bNumInterfaces 1
    bConfigurationValue 1
    iConfiguration 0
    bmAttributes 0xc0
      Self Powered
    MaxPower 0mA
    Interface Descriptor:
      bLength 9
      bDescriptorType 4
      bInterfaceNumber 0
      bAlternateSetting 0
      bNumEndpoints 3
      bInterfaceClass 6 Imaging
      bInterfaceSubClass 1 Still Image Capture
      bInterfaceProtocol 1 Picture Transfer Protocol (PIMA 15470)
      iInterface 0
      Endpoint Descriptor:
        bLength 7
        bDescriptorType 5
        bEndpointAddress 0x01 EP 1 OUT
        bmAttributes 2
          Transfer Type Bulk
          Synch Type None
          Usage Type Data
        wMaxPacketSize 0x0040 1x 64 bytes
        bInterval 0
      Endpoint Descriptor:
        bLength 7
        bDescriptorType 5
        bEndpointAddress 0x82 EP 2 IN
        bmAttributes 2
          Transfer Type Bulk
          Synch Type None
          Usage Type Data
        wMaxPacketSize 0x0040 1x 64 bytes
        bInterval 0
      Endpoint Descriptor:
        bLength 7
        bDescriptorType 5
        bEndpointAddress 0x83 EP 3 IN
        bmAttributes 3
          Transfer Type Interrupt
          Synch Type None
          Usage Type Data
        wMaxPacketSize 0x0008 1x 8 bytes
        bInterval 100
can't get device qualifier: Operation not permitted
can't get debug descriptor: Operation not permitted
cannot read device status, Operation not permitted (1)

i dont undestand why this operation in no permited could be so...

[miguel (migueldemalaga)]

sorry i use sudo:

Bus 003 Device 005: ID 04cb:01c4 Fuji Photo Film Co., Ltd
Device Descriptor:
  bLength 18
  bDescriptorType 1
  bcdUSB 2.00
  bDeviceClass 0 (Defined at Interface level)
  bDeviceSubClass 0
  bDeviceProtocol 0
  bMaxPacketSize0 64
  idVendor 0x04cb Fuji Photo Film Co., Ltd
  idProduct 0x01c4
  bcdDevice 1.00
  iManufacturer 1 FUJIFILM
  iProduct 2 Digital Camera
  iSerial 3 4C313230202007090398457UA11687
  bNumConfigurations 1
  Configuration Descriptor:
    bLength 9
    bDescriptorType 2
    wTotalLength 39
    bNumInterfaces 1
    bConfigurationValue 1
    iConfiguration 0
    bmAttributes 0xc0
      Self Powered
    MaxPower 0mA
    Interface Descriptor:
      bLength 9
      bDescriptorType 4
      bInterfaceNumber 0
      bAlternateSetting 0
      bNumEndpoints 3
      bInterfaceClass 6 Imaging
      bInterfaceSubClass 1 Still Image Capture
      bInterfaceProtocol 1 Picture Transfer Protocol (PIMA 15470)
      iInterface 0
      Endpoint Descriptor:
        bLength 7
        bDescriptorType 5
        bEndpointAddress 0x01 EP 1 OUT
        bmAttributes 2
          Transfer Type Bulk
          Synch Type None
          Usage Type Data
        wMaxPacketSize 0x0040 1x 64 bytes
        bInterval 0
      Endpoint Descriptor:
        bLength 7
        bDescriptorType 5
        bEndpointAddress 0x82 EP 2 IN
        bmAttributes 2
          Transfer Type Bulk
          Synch Type None
          Usage Type Data
        wMaxPacketSize 0x0040 1x 64 bytes
        bInterval 0
      Endpoint Descriptor:
        bLength 7
        bDescriptorType 5
        bEndpointAddress 0x83 EP 3 IN
        bmAttributes 3
          Transfer Type Interrupt
          Synch Type None
          Usage Type Data
        wMaxPacketSize 0x0008 1x 8 bytes
        bInterval 100
Device Status: 0x0001
  Self Powered
miguel@miguel-desktop:~$

[miguel (migueldemalaga)]

this is gthumb error into spanish ( sorry )

Se ha producido un error en la biblioteca de entrada-salida ('No se pudo reclamar el dispositivo USB'): No se pudo reclamar la interfaz 0 (Operación no permitida). Debe asegurarse de tener acceso de lectura/escritura al dispositivo y que ningún otro programa o módulo del núcleo (como sdc2xx, stv680, spca50x) esté utilizándolo.