(In reply to comment #0) > 2D work well but no 3D acceleration. Got somme errors messages on module loading > during the boot process. > > glxgears -> 144 FPS > fgl_glxgears crash : > X Error of failed request: BadMatch (invalid parameter attributes) > Major opcode of failed request: 145 (GLX) > Minor opcode of failed request: 5 (X_GLXMakeCurrent) > Serial number of failed request: 32 > Current serial number in output stream: 32 > > fglrxinfo > display: :0.0 screen: 0 > OpenGL vendor string: Mesa project: www.mesa3d.org > OpenGL renderer string: Mesa GLX Indirect > OpenGL version string: 1.2 (1.5 Mesa 6.2.1) > > dmesg | grep fglrx > fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, > GERMANY' taints kernel. > [fglrx] Maximum main memory to use for locked dma buffers: 424 MBytes. > [fglrx:firegl_stub_register] *ERROR* Unable to the open some already present DRM > kernel module! > [fglrx] Maximum main memory to use for locked dma buffers: 424 MBytes. > [fglrx:firegl_init_32compat_ioctls] *ERROR* unable to register ioctl32 0 > [fglrx:firegl_init] *ERROR* Couldn't register compat32 ioctls! > > cat /var/log/Xorg.0.log | grep fglrx > (II) LoadModule: "fglrx" > (II) Loading /usr/X11R6/lib/modules/drivers/fglrx_drv.o > (II) Module fglrx: vendor="FireGL - ATI Technologies Inc." > (II) fglrx(0): pEnt->device->identifier=0x718d60 > (II) fglrx(0): === [R200PreInit] === begin, [s] > (II) fglrx(0): PCI bus 1 card 0 func 0 > (**) fglrx(0): Depth 24, (--) framebuffer bpp 32 > (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps) > (==) fglrx(0): Default visual is TrueColor > (==) fglrx(0): Qbs disabled > (==) fglrx(0): RGB weight 888 > (II) fglrx(0): Using 8 bits per RGB (8 bit DAC) > (==) fglrx(0): Gamma Correction for I is 0x06419064 > (==) fglrx(0): Gamma Correction for II is 0x06419064 > (==) fglrx(0): Buffer Tiling is ON > (II) fglrx(0): initializing int10 > (II) fglrx(0): Primary V_BIOS segment is: 0xc000 > (--) fglrx(0): Chipset: "MOBILITY RADEON 9600/9700 (M10/M11 4E50)" (Chipset = > 0x4e50) > (--) fglrx(0): (PciSubVendor = 0x17c0, PciSubDevice = 0x2061) > (--) fglrx(0): board vendor info: third party grafics adapter - NOT original ATI > (--) fglrx(0): Linear framebuffer (phys) at 0xd8000000 > (--) fglrx(0): MMIO registers at 0xd0100000 > (--) fglrx(0): ChipExtRevID = 0x00 > (--) fglrx(0): ChipIntRevID = 0x0C > (--) fglrx(0): VideoRAM: 65536 kByte (64-bit SDR SDRAM) > (WW) fglrx(0): board is an unknown third party board, chipset is supported > (II) fglrx(0): I2C bus "DDC" initialized. > (II) fglrx(0): Connector Layout from BIOS -------- > (II) fglrx(0): Connector1: DDCType-3, DACType-0, TMDSType--1, ConnectorType-2 > (II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0. > (II) fglrx(0): I2C device "DDC:ddc2" removed. > (II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0. > (II) fglrx(0): I2C device "DDC:ddc2" removed. > (II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0. > (II) fglrx(0): I2C device "DDC:ddc2" removed. > (II) fglrx(0): DDC detected on DDCType 3 with Monitor Type 0 > (II) fglrx(0): Primary head: > (II) fglrx(0): Secondary head: > (II) fglrx(0): > (II) fglrx(0): DesktopSetup 0x0000 > (II) fglrx(0): Panel ID string: 1024x768 > (II) fglrx(0): Panel Size from BIOS: 1024x768 > (==) fglrx(0): PseudoColor visuals disabled > (==) fglrx(0): Overlay disabled > (==) fglrx(0): Overlay disabled > (II) fglrx(0): PLL parameters: rf=2700 rd=6 min=20000 max=35000 > (==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0) > (==) fglrx(0): Center Mode is disabled > (==) fglrx(0): TMDS coherent mode is enabled > (II) fglrx(0): Valid mode using on-chip RMX: 1024x768 > (II) fglrx(0): Total 1 valid mode(s) found. > (--) fglrx(0): Virtual size is 1024x768 (pitch 1024) > (**) fglrx(0): *Mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz > (II) fglrx(0): Modeline "1024x768" 65.00 1024 1040 1176 1344 768 770 776 806 > (==) fglrx(0): DPI set to (75, 75) > (==) fglrx(0): NoAccel = NO > (==) fglrx(0): HPV inactive > (==) fglrx(0): FSAA enabled: NO > (==) fglrx(0): FSAA Gamma enabled > (==) fglrx(0): FSAA Multisample Position is fix > (==) fglrx(0): NoDRI = NO > (II) Loading sub module "fglrxdrm" > (II) LoadModule: "fglrxdrm" > (II) Loading /usr/X11R6/lib/modules/linux/libfglrxdrm.a > (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc." > (II) fglrx(0): Depth moves disabled by default > (==) fglrx(0): Capabilities: 0x00000000 > (==) fglrx(0): cpuFlags: 0x4000001f > (==) fglrx(0): cpuSpeedMHz: 0x00000702 > (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so" > (==) fglrx(0): UseFastTLS=0 > (==) fglrx(0): BlockSignalsOnLock=1 > (==) fglrx(0): EnablePrivateBackZ = NO > (II) fglrx(0): UMM area: 0xd8501000 (size=0x03aff000) > (II) fglrx(0): driver needs XFree86 version: 4.3.x > (WW) fglrx(0): could not detect XFree86 version (query_status=-3) > (II) fglrx(0): doing DRIScreenInit > [drm] failed to load kernel module "fglrx" > (II) fglrx(0): [drm] drmOpen failed > (EE) fglrx(0): DRIScreenInit failed! > (WW) fglrx(0): *********************************************** > (WW) fglrx(0): * DRI initialization failed! * > (WW) fglrx(0): * (maybe driver kernel module missing or bad) * > (WW) fglrx(0): * 2D acceleraton available (MMIO) * > (WW) fglrx(0): * no 3D acceleration available * > (WW) fglrx(0): ********************************************* * > (II) fglrx(0): FBADPhys: 0xd8000000 FBMappedSize: 0x04000000 > (==) fglrx(0): Write-combining range (0xd8000000,0x4000000) > (II) fglrx(0): FBMM initialized for area (0,0)-(1024,8191) > (II) fglrx(0): FBMM auto alloc for area (0,0)-(1024,768) (front color buffer - > assumption) > (==) fglrx(0): Backing store disabled > (==) fglrx(0): Silken mouse enabled > (II) fglrx(0): Using hardware cursor (scanline 768) > (II) fglrx(0): Largest offscreen area available: 1024 x 7419 > (**) fglrx(0): DPMS enabled > (II) fglrx(0): Using XFree86 Acceleration Architecture (XAA) > (II) fglrx(0): Acceleration enabled > (II) fglrx(0): Direct rendering disabled (In reply to comment #0) > 2D work well but no 3D acceleration. Got somme errors messages on module loading > during the boot process. > > glxgears -> 144 FPS > fgl_glxgears crash : > X Error of failed request: BadMatch (invalid parameter attributes) > Major opcode of failed request: 145 (GLX) > Minor opcode of failed request: 5 (X_GLXMakeCurrent) > Serial number of failed request: 32 > Current serial number in output stream: 32 > > fglrxinfo > display: :0.0 screen: 0 > OpenGL vendor string: Mesa project: www.mesa3d.org > OpenGL renderer string: Mesa GLX Indirect > OpenGL version string: 1.2 (1.5 Mesa 6.2.1) > > dmesg | grep fglrx > fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, > GERMANY' taints kernel. > [fglrx] Maximum main memory to use for locked dma buffers: 424 MBytes. > [fglrx:firegl_stub_register] *ERROR* Unable to the open some already present DRM > kernel module! > [fglrx] Maximum main memory to use for locked dma buffers: 424 MBytes. > [fglrx:firegl_init_32compat_ioctls] *ERROR* unable to register ioctl32 0 > [fglrx:firegl_init] *ERROR* Couldn't register compat32 ioctls! > > cat /var/log/Xorg.0.log | grep fglrx > (II) LoadModule: "fglrx" > (II) Loading /usr/X11R6/lib/modules/drivers/fglrx_drv.o > (II) Module fglrx: vendor="FireGL - ATI Technologies Inc." > (II) fglrx(0): pEnt->device->identifier=0x718d60 > (II) fglrx(0): === [R200PreInit] === begin, [s] > (II) fglrx(0): PCI bus 1 card 0 func 0 > (**) fglrx(0): Depth 24, (--) framebuffer bpp 32 > (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps) > (==) fglrx(0): Default visual is TrueColor > (==) fglrx(0): Qbs disabled > (==) fglrx(0): RGB weight 888 > (II) fglrx(0): Using 8 bits per RGB (8 bit DAC) > (==) fglrx(0): Gamma Correction for I is 0x06419064 > (==) fglrx(0): Gamma Correction for II is 0x06419064 > (==) fglrx(0): Buffer Tiling is ON > (II) fglrx(0): initializing int10 > (II) fglrx(0): Primary V_BIOS segment is: 0xc000 > (--) fglrx(0): Chipset: "MOBILITY RADEON 9600/9700 (M10/M11 4E50)" (Chipset = > 0x4e50) > (--) fglrx(0): (PciSubVendor = 0x17c0, PciSubDevice = 0x2061) > (--) fglrx(0): board vendor info: third party grafics adapter - NOT original ATI > (--) fglrx(0): Linear framebuffer (phys) at 0xd8000000 > (--) fglrx(0): MMIO registers at 0xd0100000 > (--) fglrx(0): ChipExtRevID = 0x00 > (--) fglrx(0): ChipIntRevID = 0x0C > (--) fglrx(0): VideoRAM: 65536 kByte (64-bit SDR SDRAM) > (WW) fglrx(0): board is an unknown third party board, chipset is supported > (II) fglrx(0): I2C bus "DDC" initialized. > (II) fglrx(0): Connector Layout from BIOS -------- > (II) fglrx(0): Connector1: DDCType-3, DACType-0, TMDSType--1, ConnectorType-2 > (II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0. > (II) fglrx(0): I2C device "DDC:ddc2" removed. > (II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0. > (II) fglrx(0): I2C device "DDC:ddc2" removed. > (II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0. > (II) fglrx(0): I2C device "DDC:ddc2" removed. > (II) fglrx(0): DDC detected on DDCType 3 with Monitor Type 0 > (II) fglrx(0): Primary head: > (II) fglrx(0): Secondary head: > (II) fglrx(0): > (II) fglrx(0): DesktopSetup 0x0000 > (II) fglrx(0): Panel ID string: 1024x768 > (II) fglrx(0): Panel Size from BIOS: 1024x768 > (==) fglrx(0): PseudoColor visuals disabled > (==) fglrx(0): Overlay disabled > (==) fglrx(0): Overlay disabled > (II) fglrx(0): PLL parameters: rf=2700 rd=6 min=20000 max=35000 > (==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0) > (==) fglrx(0): Center Mode is disabled > (==) fglrx(0): TMDS coherent mode is enabled > (II) fglrx(0): Valid mode using on-chip RMX: 1024x768 > (II) fglrx(0): Total 1 valid mode(s) found. > (--) fglrx(0): Virtual size is 1024x768 (pitch 1024) > (**) fglrx(0): *Mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz > (II) fglrx(0): Modeline "1024x768" 65.00 1024 1040 1176 1344 768 770 776 806 > (==) fglrx(0): DPI set to (75, 75) > (==) fglrx(0): NoAccel = NO > (==) fglrx(0): HPV inactive > (==) fglrx(0): FSAA enabled: NO > (==) fglrx(0): FSAA Gamma enabled > (==) fglrx(0): FSAA Multisample Position is fix > (==) fglrx(0): NoDRI = NO > (II) Loading sub module "fglrxdrm" > (II) LoadModule: "fglrxdrm" > (II) Loading /usr/X11R6/lib/modules/linux/libfglrxdrm.a > (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc." > (II) fglrx(0): Depth moves disabled by default > (==) fglrx(0): Capabilities: 0x00000000 > (==) fglrx(0): cpuFlags: 0x4000001f > (==) fglrx(0): cpuSpeedMHz: 0x00000702 > (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so" > (==) fglrx(0): UseFastTLS=0 > (==) fglrx(0): BlockSignalsOnLock=1 > (==) fglrx(0): EnablePrivateBackZ = NO > (II) fglrx(0): UMM area: 0xd8501000 (size=0x03aff000) > (II) fglrx(0): driver needs XFree86 version: 4.3.x > (WW) fglrx(0): could not detect XFree86 version (query_status=-3) > (II) fglrx(0): doing DRIScreenInit > [drm] failed to load kernel module "fglrx" > (II) fglrx(0): [drm] drmOpen failed > (EE) fglrx(0): DRIScreenInit failed! > (WW) fglrx(0): *********************************************** > (WW) fglrx(0): * DRI initialization failed! * > (WW) fglrx(0): * (maybe driver kernel module missing or bad) * > (WW) fglrx(0): * 2D acceleraton available (MMIO) * > (WW) fglrx(0): * no 3D acceleration available * > (WW) fglrx(0): ********************************************* * > (II) fglrx(0): FBADPhys: 0xd8000000 FBMappedSize: 0x04000000 > (==) fglrx(0): Write-combining range (0xd8000000,0x4000000) > (II) fglrx(0): FBMM initialized for area (0,0)-(1024,8191) > (II) fglrx(0): FBMM auto alloc for area (0,0)-(1024,768) (front color buffer - > assumption) > (==) fglrx(0): Backing store disabled > (==) fglrx(0): Silken mouse enabled > (II) fglrx(0): Using hardware cursor (scanline 768) > (II) fglrx(0): Largest offscreen area available: 1024 x 7419 > (**) fglrx(0): DPMS enabled > (II) fglrx(0): Using XFree86 Acceleration Architecture (XAA) > (II) fglrx(0): Acceleration enabled > (II) fglrx(0): Direct rendering disabled linux-restricted-modules-2.6.10-2-amd64-k8_2.6.10.3-3_amd64.deb is used (system HOARY up to date)