[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.5.0-17-generic (buildd@allspice) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1) ) #28-Ubuntu SMP Tue Oct 9 19:31:23 UTC 2012 (Ubuntu 3.5.0-17.28-generic 3.5.5) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.5.0-17-generic root=UUID=f405a0f5-98fd-4d9e-89ca-f85c9d1078c4 ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cff7ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cff80000-0x00000000cff8dfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000cff8e000-0x00000000cffdffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000cffe0000-0x00000000cfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000022fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.4 present. [ 0.000000] DMI: System manufacturer P5K Deluxe/P5K Deluxe, BIOS 0404 06/15/2007 [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x230000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-DFFFF write-protect [ 0.000000] E0000-EFFFF write-through [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0D0000000 mask FF0000000 uncachable [ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable [ 0.000000] 2 base 000000000 mask E00000000 write-back [ 0.000000] 3 base 200000000 mask FE0000000 write-back [ 0.000000] 4 base 220000000 mask FF0000000 write-back [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] original variable MTRRs [ 0.000000] reg 0, base: 3328MB, range: 256MB, type UC [ 0.000000] reg 1, base: 3584MB, range: 512MB, type UC [ 0.000000] reg 2, base: 0GB, range: 8GB, type WB [ 0.000000] reg 3, base: 8GB, range: 512MB, type WB [ 0.000000] reg 4, base: 8704MB, range: 256MB, type WB [ 0.000000] total RAM covered: 8192M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 64K num_reg: 6 lose cover RAM: 0G [ 0.000000] New variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB [ 0.000000] reg 2, base: 3GB, range: 256MB, type WB [ 0.000000] reg 3, base: 4GB, range: 4GB, type WB [ 0.000000] reg 4, base: 8GB, range: 512MB, type WB [ 0.000000] reg 5, base: 8704MB, range: 256MB, type WB [ 0.000000] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xcff80 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780] [ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff] [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0xcff7ffff] [ 0.000000] [mem 0x00000000-0xcfdfffff] page 2M [ 0.000000] [mem 0xcfe00000-0xcff7ffff] page 4k [ 0.000000] kernel direct mapping tables up to 0xcff7ffff @ [mem 0x1fffa000-0x1fffffff] [ 0.000000] init_memory_mapping: [mem 0x100000000-0x22fffffff] [ 0.000000] [mem 0x100000000-0x22fffffff] page 2M [ 0.000000] kernel direct mapping tables up to 0x22fffffff @ [mem 0xcff76000-0xcff7ffff] [ 0.000000] RAMDISK: [mem 0x362e4000-0x37169fff] [ 0.000000] ACPI: RSDP 00000000000fbb80 00024 (v02 ACPIAM) [ 0.000000] ACPI: XSDT 00000000cff80100 00054 (v01 A_M_I_ OEMXSDT 06000715 MSFT 00000097) [ 0.000000] ACPI: FACP 00000000cff80290 000F4 (v03 A_M_I_ OEMFACP 06000715 MSFT 00000097) [ 0.000000] ACPI: DSDT 00000000cff805c0 08C47 (v01 A0761 A0761001 00000001 INTL 20060113) [ 0.000000] ACPI: FACS 00000000cff8e000 00040 [ 0.000000] ACPI: APIC 00000000cff80390 0006C (v01 A_M_I_ OEMAPIC 06000715 MSFT 00000097) [ 0.000000] ACPI: MCFG 00000000cff80400 0003C (v01 A_M_I_ OEMMCFG 06000715 MSFT 00000097) [ 0.000000] ACPI: OEMB 00000000cff8e040 00081 (v01 A_M_I_ AMI_OEM 06000715 MSFT 00000097) [ 0.000000] ACPI: HPET 00000000cff89210 00038 (v01 A_M_I_ OEMHPET 06000715 MSFT 00000097) [ 0.000000] ACPI: OSFR 00000000cff89250 000B0 (v01 A_M_I_ OEMOSFR 06000715 MSFT 00000097) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000022fffffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x22fffffff] [ 0.000000] NODE_DATA [mem 0x22fffc000-0x22fffffff] [ 0.000000] [ffffea0000000000-ffffea0008bfffff] PMD -> [ffff880227600000-ffff88022f5fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00010000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x22fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00010000-0x0009dfff] [ 0.000000] node 0: [mem 0x00100000-0xcff7ffff] [ 0.000000] node 0: [mem 0x100000000-0x22fffffff] [ 0.000000] On node 0 totalpages: 2096910 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 6 pages reserved [ 0.000000] DMA zone: 3912 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 16320 pages used for memmap [ 0.000000] DMA32 zone: 831424 pages, LIFO batch:31 [ 0.000000] Normal zone: 19456 pages used for memmap [ 0.000000] Normal zone: 1225728 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000 [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000cff80000 - 00000000cff8e000 [ 0.000000] PM: Registered nosave memory: 00000000cff8e000 - 00000000cffe0000 [ 0.000000] PM: Registered nosave memory: 00000000cffe0000 - 00000000d0000000 [ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffe00000 [ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000 [ 0.000000] e820: [mem 0xd0000000-0xfedfffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88022fc00000 s83584 r8192 d22912 u524288 [ 0.000000] pcpu-alloc: s83584 r8192 d22912 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2061064 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.5.0-17-generic root=UUID=f405a0f5-98fd-4d9e-89ca-f85c9d1078c4 ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 8159324k/9175040k available (6711k kernel code, 787400k absent, 228316k reserved, 6459k data, 928k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:16640 nr_irqs:712 16 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 33554432 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2400.196 MHz processor. [ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.39 BogoMIPS (lpj=9600784) [ 0.004008] pid_max: default: 32768 minimum: 301 [ 0.004034] Security Framework initialized [ 0.004049] AppArmor: AppArmor initialized [ 0.004050] Yama: becoming mindful. [ 0.008284] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.011805] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.013498] Mount-cache hash table entries: 256 [ 0.013722] Initializing cgroup subsys cpuacct [ 0.013726] Initializing cgroup subsys memory [ 0.013735] Initializing cgroup subsys devices [ 0.013736] Initializing cgroup subsys freezer [ 0.013738] Initializing cgroup subsys blkio [ 0.013740] Initializing cgroup subsys perf_event [ 0.013770] CPU: Physical Processor ID: 0 [ 0.013771] CPU: Processor Core ID: 0 [ 0.013773] mce: CPU supports 6 MCE banks [ 0.013781] CPU0: Thermal monitoring enabled (TM2) [ 0.013784] using mwait in idle threads. [ 0.016246] ACPI: Core revision 20120320 [ 0.020011] ftrace: allocating 25118 entries in 99 pages [ 0.028410] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.068592] CPU0: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b [ 0.072003] APIC calibration not consistent with PM-Timer: 155ms instead of 100ms [ 0.072003] APIC delta adjusted to PM-Timer: 1666721 (2600057) [ 0.072003] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver. [ 0.072003] PEBS disabled due to CPU errata. [ 0.072003] ... version: 2 [ 0.072003] ... bit width: 40 [ 0.072003] ... generic registers: 2 [ 0.072003] ... value mask: 000000ffffffffff [ 0.072003] ... max period: 000000007fffffff [ 0.072003] ... fixed-purpose events: 3 [ 0.072003] ... event mask: 0000000700000003 [ 0.072003] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.072003] Booting Node 0, Processors #1 #2 #3 Ok. [ 0.107623] Brought up 4 CPUs [ 0.107626] Total of 4 processors activated (19201.56 BogoMIPS). [ 0.108127] devtmpfs: initialized [ 0.112928] EVM: security.selinux [ 0.112929] EVM: security.SMACK64 [ 0.112931] EVM: security.capability [ 0.112942] PM: Registering ACPI NVS region [mem 0xcff8e000-0xcffdffff] (335872 bytes) [ 0.112942] dummy: [ 0.112942] RTC time: 17:40:36, date: 11/18/12 [ 0.112942] NET: Registered protocol family 16 [ 0.112942] Trying to unpack rootfs image as initramfs... [ 0.113035] ACPI: bus type pci registered [ 0.113090] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.113093] PCI: not using MMCONFIG [ 0.113094] PCI: Using configuration type 1 for base access [ 0.120819] bio: create slab at 0 [ 0.121110] ACPI: Added _OSI(Module Device) [ 0.121110] ACPI: Added _OSI(Processor Device) [ 0.121110] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.121110] ACPI: Added _OSI(Processor Aggregator Device) [ 0.124861] ACPI: EC: Look up EC in DSDT [ 0.126087] ACPI: Executed 1 blocks of module-level executable AML code [ 0.129392] ACPI: SSDT 00000000cff8e0d0 001D2 (v01 AMI CPU1PM 00000001 INTL 20060113) [ 0.129688] ACPI: Dynamic OEM Table Load: [ 0.129691] ACPI: SSDT (null) 001D2 (v01 AMI CPU1PM 00000001 INTL 20060113) [ 0.129830] ACPI: SSDT 00000000cff8e2b0 00143 (v01 AMI CPU2PM 00000001 INTL 20060113) [ 0.130123] ACPI: Dynamic OEM Table Load: [ 0.130126] ACPI: SSDT (null) 00143 (v01 AMI CPU2PM 00000001 INTL 20060113) [ 0.130263] ACPI: SSDT 00000000cff8e400 00143 (v01 AMI CPU3PM 00000001 INTL 20060113) [ 0.130553] ACPI: Dynamic OEM Table Load: [ 0.130555] ACPI: SSDT (null) 00143 (v01 AMI CPU3PM 00000001 INTL 20060113) [ 0.130688] ACPI: SSDT 00000000cff8e550 00143 (v01 AMI CPU4PM 00000001 INTL 20060113) [ 0.130981] ACPI: Dynamic OEM Table Load: [ 0.130984] ACPI: SSDT (null) 00143 (v01 AMI CPU4PM 00000001 INTL 20060113) [ 0.131117] ACPI: Interpreter enabled [ 0.131121] ACPI: (supports S0 S1 S3 S4 S5) [ 0.131139] ACPI: Using IOAPIC for interrupt routing [ 0.131160] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.131573] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.160043] ACPI: No dock devices found. [ 0.160056] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.160118] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.160208] pci_root PNP0A08:00: >host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.160210] pci_root PNP0A08:00: >host bridge window [io 0x0d00-0xffff] (ignored) [ 0.160213] pci_root PNP0A08:00: >host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.160215] pci_root PNP0A08:00: >host bridge window [mem 0x000d0000-0x000dffff] (ignored) [ 0.160218] pci_root PNP0A08:00: >host bridge window [mem 0xd0000000-0xffffffff] (ignored) [ 0.160220] PCI: root bus 00: using default resources [ 0.160249] PCI host bridge to bus 0000:00 [ 0.160252] pci_bus 0000:00: >root bus resource [io 0x0000-0xffff] [ 0.160254] pci_bus 0000:00: >root bus resource [mem 0x00000000-0xfffffffff] [ 0.160264] pci 0000:00:00.0: >[8086:29c0] type 00 class 0x060000 [ 0.160307] pci 0000:00:01.0: >[8086:29c1] type 01 class 0x060400 [ 0.160345] pci 0000:00:01.0: >PME# supported from D0 D3hot D3cold [ 0.160384] pci 0000:00:1a.0: >[8086:2937] type 00 class 0x0c0300 [ 0.160425] pci 0000:00:1a.0: >reg 20: [io 0xa800-0xa81f] [ 0.160473] pci 0000:00:1a.1: >[8086:2938] type 00 class 0x0c0300 [ 0.160513] pci 0000:00:1a.1: >reg 20: [io 0xa880-0xa89f] [ 0.160563] pci 0000:00:1a.2: >[8086:2939] type 00 class 0x0c0300 [ 0.160603] pci 0000:00:1a.2: >reg 20: [io 0xac00-0xac1f] [ 0.160660] pci 0000:00:1a.7: >[8086:293c] type 00 class 0x0c0320 [ 0.160679] pci 0000:00:1a.7: >reg 10: [mem 0xfe6ffc00-0xfe6fffff] [ 0.160766] pci 0000:00:1a.7: >PME# supported from D0 D3hot D3cold [ 0.160791] pci 0000:00:1b.0: >[8086:293e] type 00 class 0x040300 [ 0.160805] pci 0000:00:1b.0: >reg 10: [mem 0xfe6f8000-0xfe6fbfff 64bit] [ 0.160868] pci 0000:00:1b.0: >PME# supported from D0 D3hot D3cold [ 0.160893] pci 0000:00:1c.0: >[8086:2940] type 01 class 0x060400 [ 0.160958] pci 0000:00:1c.0: >PME# supported from D0 D3hot D3cold [ 0.160980] pci 0000:00:1c.2: >[8086:2944] type 01 class 0x060400 [ 0.161046] pci 0000:00:1c.2: >PME# supported from D0 D3hot D3cold [ 0.161069] pci 0000:00:1c.4: >[8086:2948] type 01 class 0x060400 [ 0.161133] pci 0000:00:1c.4: >PME# supported from D0 D3hot D3cold [ 0.161155] pci 0000:00:1c.5: >[8086:294a] type 01 class 0x060400 [ 0.161219] pci 0000:00:1c.5: >PME# supported from D0 D3hot D3cold [ 0.161245] pci 0000:00:1d.0: >[8086:2934] type 00 class 0x0c0300 [ 0.161285] pci 0000:00:1d.0: >reg 20: [io 0xa080-0xa09f] [ 0.161333] pci 0000:00:1d.1: >[8086:2935] type 00 class 0x0c0300 [ 0.161373] pci 0000:00:1d.1: >reg 20: [io 0xa400-0xa41f] [ 0.161421] pci 0000:00:1d.2: >[8086:2936] type 00 class 0x0c0300 [ 0.161461] pci 0000:00:1d.2: >reg 20: [io 0xa480-0xa49f] [ 0.161520] pci 0000:00:1d.7: >[8086:293a] type 00 class 0x0c0320 [ 0.161539] pci 0000:00:1d.7: >reg 10: [mem 0xfe6ff800-0xfe6ffbff] [ 0.161624] pci 0000:00:1d.7: >PME# supported from D0 D3hot D3cold [ 0.161646] pci 0000:00:1e.0: >[8086:244e] type 01 class 0x060401 [ 0.161707] pci 0000:00:1f.0: >[8086:2916] type 00 class 0x060100 [ 0.161784] pci 0000:00:1f.0: >ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003) [ 0.161832] pci 0000:00:1f.2: >[8086:2922] type 00 class 0x010601 [ 0.161859] pci 0000:00:1f.2: >reg 10: [io 0x9c00-0x9c07] [ 0.161868] pci 0000:00:1f.2: >reg 14: [io 0x9880-0x9883] [ 0.161876] pci 0000:00:1f.2: >reg 18: [io 0x9800-0x9807] [ 0.161884] pci 0000:00:1f.2: >reg 1c: [io 0x9480-0x9483] [ 0.161892] pci 0000:00:1f.2: >reg 20: [io 0x9400-0x941f] [ 0.161899] pci 0000:00:1f.2: >reg 24: [mem 0xfe6fe800-0xfe6fefff] [ 0.161942] pci 0000:00:1f.2: >PME# supported from D3hot [ 0.161959] pci 0000:00:1f.3: >[8086:2930] type 00 class 0x0c0500 [ 0.161974] pci 0000:00:1f.3: >reg 10: [mem 0xfe6ff400-0xfe6ff4ff 64bit] [ 0.161993] pci 0000:00:1f.3: >reg 20: [io 0x0400-0x041f] [ 0.162050] pci 0000:01:00.0: >[1002:9588] type 00 class 0x030000 [ 0.162063] pci 0000:01:00.0: >reg 10: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.162073] pci 0000:01:00.0: >reg 18: [mem 0xfe7e0000-0xfe7effff 64bit] [ 0.162081] pci 0000:01:00.0: >reg 20: [io 0xb000-0xb0ff] [ 0.162093] pci 0000:01:00.0: >reg 30: [mem 0xfe7c0000-0xfe7dffff pref] [ 0.162123] pci 0000:01:00.0: >supports D1 D2 [ 0.162143] pci 0000:01:00.1: >[1002:aa08] type 00 class 0x040300 [ 0.162157] pci 0000:01:00.1: >reg 10: [mem 0xfe7fc000-0xfe7fffff 64bit] [ 0.162213] pci 0000:01:00.1: >supports D1 D2 [ 0.162242] pci 0000:00:01.0: >PCI bridge to [bus 01-01] [ 0.162245] pci 0000:00:01.0: > bridge window [io 0xb000-0xbfff] [ 0.162248] pci 0000:00:01.0: > bridge window [mem 0xfe700000-0xfe7fffff] [ 0.162252] pci 0000:00:01.0: > bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.162288] pci 0000:00:1c.0: >PCI bridge to [bus 05-05] [ 0.162296] pci 0000:00:1c.0: > bridge window [mem 0xfdf00000-0xfdffffff 64bit pref] [ 0.162352] pci 0000:04:00.0: >[1106:3432] type 00 class 0x0c0330 [ 0.162368] pci 0000:04:00.0: >reg 10: [mem 0xfeaff000-0xfeafffff] [ 0.162480] pci 0000:04:00.0: >supports D1 D2 [ 0.162482] pci 0000:04:00.0: >PME# supported from D0 D1 D2 D3hot D3cold [ 0.168032] pci 0000:00:1c.2: >PCI bridge to [bus 04-04] [ 0.168038] pci 0000:00:1c.2: > bridge window [mem 0xfea00000-0xfeafffff] [ 0.168110] pci 0000:03:00.0: >[197b:2363] type 00 class 0x010185 [ 0.168196] pci 0000:03:00.0: >reg 24: [mem 0xfe9fe000-0xfe9fffff] [ 0.168210] pci 0000:03:00.0: >reg 30: [mem 0xfe9e0000-0xfe9effff pref] [ 0.168262] pci 0000:03:00.0: >PME# supported from D3hot [ 0.168296] pci 0000:03:00.1: >[197b:2363] type 00 class 0x010185 [ 0.168321] pci 0000:03:00.1: >reg 10: [io 0xdc00-0xdc07] [ 0.168335] pci 0000:03:00.1: >reg 14: [io 0xd880-0xd883] [ 0.168348] pci 0000:03:00.1: >reg 18: [io 0xd800-0xd807] [ 0.168362] pci 0000:03:00.1: >reg 1c: [io 0xd480-0xd483] [ 0.168375] pci 0000:03:00.1: >reg 20: [io 0xd400-0xd40f] [ 0.168456] pci 0000:03:00.0: >disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.168469] pci 0000:00:1c.4: >PCI bridge to [bus 03-03] [ 0.168472] pci 0000:00:1c.4: > bridge window [io 0xd000-0xdfff] [ 0.168476] pci 0000:00:1c.4: > bridge window [mem 0xfe900000-0xfe9fffff] [ 0.168539] pci 0000:02:00.0: >[11ab:4364] type 00 class 0x020000 [ 0.168562] pci 0000:02:00.0: >reg 10: [mem 0xfe8fc000-0xfe8fffff 64bit] [ 0.168573] pci 0000:02:00.0: >reg 18: [io 0xc800-0xc8ff] [ 0.168615] pci 0000:02:00.0: >reg 30: [mem 0xfe8c0000-0xfe8dffff pref] [ 0.168682] pci 0000:02:00.0: >supports D1 D2 [ 0.168684] pci 0000:02:00.0: >PME# supported from D0 D1 D2 D3hot D3cold [ 0.176030] pci 0000:00:1c.5: >PCI bridge to [bus 02-02] [ 0.176036] pci 0000:00:1c.5: > bridge window [io 0xc000-0xcfff] [ 0.176040] pci 0000:00:1c.5: > bridge window [mem 0xfe800000-0xfe8fffff] [ 0.176078] pci 0000:06:03.0: >[11c1:5811] type 00 class 0x0c0010 [ 0.176095] pci 0000:06:03.0: >reg 10: [mem 0xfebff000-0xfebfffff] [ 0.176177] pci 0000:06:03.0: >supports D1 D2 [ 0.176179] pci 0000:06:03.0: >PME# supported from D0 D1 D2 D3hot [ 0.176200] pci 0000:06:04.0: >[10ec:8167] type 00 class 0x020000 [ 0.176216] pci 0000:06:04.0: >reg 10: [io 0xe800-0xe8ff] [ 0.176225] pci 0000:06:04.0: >reg 14: [mem 0xfebfec00-0xfebfecff] [ 0.176264] pci 0000:06:04.0: >reg 30: [mem 0xfebc0000-0xfebdffff pref] [ 0.176289] pci 0000:06:04.0: >supports D1 D2 [ 0.176291] pci 0000:06:04.0: >PME# supported from D1 D2 D3hot D3cold [ 0.176332] pci 0000:00:1e.0: >PCI bridge to [bus 06-06] (subtractive decode) [ 0.176335] pci 0000:00:1e.0: > bridge window [io 0xe000-0xefff] [ 0.176339] pci 0000:00:1e.0: > bridge window [mem 0xfeb00000-0xfebfffff] [ 0.176345] pci 0000:00:1e.0: > bridge window [io 0x0000-0xffff] (subtractive decode) [ 0.176347] pci 0000:00:1e.0: > bridge window [mem 0x00000000-0xfffffffff] (subtractive decode) [ 0.176374] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.176468] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] [ 0.176493] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.176558] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] [ 0.176583] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT] [ 0.176608] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT] [ 0.176641] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT] [ 0.176685] pci0000:00: >Requesting ACPI _OSC control (0x1d) [ 0.176688] pci0000:00: >ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d [ 0.176689] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.183607] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.183651] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.183693] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 *15) [ 0.183741] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 *14 15) [ 0.183782] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.183825] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.183866] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.183907] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15) [ 0.184037] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.184042] vgaarb: loaded [ 0.184043] vgaarb: bridge control possible 0000:01:00.0 [ 0.184224] SCSI subsystem initialized [ 0.184267] libata version 3.00 loaded. [ 0.184267] ACPI: bus type usb registered [ 0.184267] usbcore: registered new interface driver usbfs [ 0.184267] usbcore: registered new interface driver hub [ 0.184267] usbcore: registered new device driver usb [ 0.184267] PCI: Using ACPI for IRQ routing [ 0.190130] PCI: pci_cache_line_size set to 64 bytes [ 0.190229] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff] [ 0.190231] e820: reserve RAM buffer [mem 0xcff80000-0xcfffffff] [ 0.190333] NetLabel: Initializing [ 0.190335] NetLabel: domain hash size = 128 [ 0.190336] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.190349] NetLabel: unlabeled traffic allowed by default [ 0.190372] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.190372] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.190372] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.200040] Switching to clocksource hpet [ 0.207449] AppArmor: AppArmor Filesystem Enabled [ 0.207486] pnp: PnP ACPI init [ 0.207504] ACPI: bus type pnp registered [ 0.207594] pnp 00:00: >[bus 00-ff] [ 0.207597] pnp 00:00: >[io 0x0cf8-0x0cff] [ 0.207600] pnp 00:00: >[io 0x0000-0x0cf7 window] [ 0.207602] pnp 00:00: >[io 0x0d00-0xffff window] [ 0.207604] pnp 00:00: >[mem 0x000a0000-0x000bffff window] [ 0.207606] pnp 00:00: >[mem 0x000d0000-0x000dffff window] [ 0.207608] pnp 00:00: >[mem 0xd0000000-0xffffffff window] [ 0.207673] pnp 00:00: >Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.207682] pnp 00:01: >[mem 0xfed14000-0xfed19fff] [ 0.207738] system 00:01: >[mem 0xfed14000-0xfed19fff] has been reserved [ 0.207742] system 00:01: >Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.207771] pnp 00:02: >[dma 4] [ 0.207773] pnp 00:02: >[io 0x0000-0x000f] [ 0.207775] pnp 00:02: >[io 0x0081-0x0083] [ 0.207777] pnp 00:02: >[io 0x0087] [ 0.207779] pnp 00:02: >[io 0x0089-0x008b] [ 0.207780] pnp 00:02: >[io 0x008f] [ 0.207782] pnp 00:02: >[io 0x00c0-0x00df] [ 0.207805] pnp 00:02: >Plug and Play ACPI device, IDs PNP0200 (active) [ 0.207817] pnp 00:03: >[io 0x0070-0x0071] [ 0.207828] pnp 00:03: >[irq 8] [ 0.207848] pnp 00:03: >Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.207855] pnp 00:04: >[io 0x0061] [ 0.207878] pnp 00:04: >Plug and Play ACPI device, IDs PNP0800 (active) [ 0.207886] pnp 00:05: >[io 0x00f0-0x00ff] [ 0.207892] pnp 00:05: >[irq 13] [ 0.207913] pnp 00:05: >Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.208062] pnp 00:06: >[io 0x0000-0xffffffffffffffff disabled] [ 0.208064] pnp 00:06: >[io 0x0000-0xffffffffffffffff disabled] [ 0.208066] pnp 00:06: >[io 0x0290-0x0297] [ 0.208109] system 00:06: >[io 0x0290-0x0297] has been reserved [ 0.208113] system 00:06: >Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.208196] pnp 00:07: >[io 0x0010-0x001f] [ 0.208199] pnp 00:07: >[io 0x0022-0x003f] [ 0.208201] pnp 00:07: >[io 0x0044-0x004d] [ 0.208203] pnp 00:07: >[io 0x0050-0x005f] [ 0.208204] pnp 00:07: >[io 0x0062-0x0063] [ 0.208206] pnp 00:07: >[io 0x0065-0x006f] [ 0.208208] pnp 00:07: >[io 0x0072-0x007f] [ 0.208210] pnp 00:07: >[io 0x0080] [ 0.208212] pnp 00:07: >[io 0x0084-0x0086] [ 0.208214] pnp 00:07: >[io 0x0088] [ 0.208216] pnp 00:07: >[io 0x008c-0x008e] [ 0.208217] pnp 00:07: >[io 0x0090-0x009f] [ 0.208219] pnp 00:07: >[io 0x00a2-0x00bf] [ 0.208221] pnp 00:07: >[io 0x00e0-0x00ef] [ 0.208223] pnp 00:07: >[io 0x04d0-0x04d1] [ 0.208225] pnp 00:07: >[io 0x0800-0x087f] [ 0.208227] pnp 00:07: >[io 0x0400-0x03ff disabled] [ 0.208228] pnp 00:07: >[io 0x0480-0x04bf] [ 0.208233] pnp 00:07: >[mem 0xfed1c000-0xfed1ffff] [ 0.208235] pnp 00:07: >[mem 0xfed20000-0xfed3ffff] [ 0.208237] pnp 00:07: >[mem 0xfed50000-0xfed8ffff] [ 0.208239] pnp 00:07: >[mem 0xffa00000-0xffafffff] [ 0.208240] pnp 00:07: >[mem 0xffb00000-0xffbfffff] [ 0.208242] pnp 00:07: >[mem 0xffe00000-0xffefffff] [ 0.208244] pnp 00:07: >[mem 0xfff00000-0xfffffffe] [ 0.208310] system 00:07: >[io 0x04d0-0x04d1] has been reserved [ 0.208313] system 00:07: >[io 0x0800-0x087f] has been reserved [ 0.208315] system 00:07: >[io 0x0480-0x04bf] has been reserved [ 0.208318] system 00:07: >[mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.208321] system 00:07: >[mem 0xfed20000-0xfed3ffff] has been reserved [ 0.208323] system 00:07: >[mem 0xfed50000-0xfed8ffff] has been reserved [ 0.208326] system 00:07: >[mem 0xffa00000-0xffafffff] has been reserved [ 0.208328] system 00:07: >[mem 0xffb00000-0xffbfffff] has been reserved [ 0.208331] system 00:07: >[mem 0xffe00000-0xffefffff] has been reserved [ 0.208333] system 00:07: >[mem 0xfff00000-0xfffffffe] has been reserved [ 0.208337] system 00:07: >Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.208390] pnp 00:08: >[mem 0xfed00000-0xfed003ff] [ 0.208416] pnp 00:08: >Plug and Play ACPI device, IDs PNP0103 (active) [ 0.208611] pnp 00:09: >[irq 4] [ 0.208614] pnp 00:09: >[dma 0 disabled] [ 0.208616] pnp 00:09: >[io 0x03f8-0x03ff] [ 0.208681] pnp 00:09: >Plug and Play ACPI device, IDs PNP0501 (active) [ 0.208719] pnp 00:0a: >[mem 0xfec00000-0xfec00fff] [ 0.208721] pnp 00:0a: >[mem 0xfee00000-0xfee00fff] [ 0.208761] system 00:0a: >[mem 0xfec00000-0xfec00fff] could not be reserved [ 0.208763] system 00:0a: >[mem 0xfee00000-0xfee00fff] has been reserved [ 0.208767] system 00:0a: >Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.208791] pnp 00:0b: >[io 0x0060] [ 0.208793] pnp 00:0b: >[io 0x0064] [ 0.208798] pnp 00:0b: >[irq 1] [ 0.208829] pnp 00:0b: >Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 0.208856] pnp 00:0c: >[mem 0xe0000000-0xefffffff] [ 0.208901] system 00:0c: >[mem 0xe0000000-0xefffffff] has been reserved [ 0.208904] system 00:0c: >Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.209320] pnp 00:0d: >[mem 0x00000000-0x0009ffff] [ 0.209323] pnp 00:0d: >[mem 0x000c0000-0x000cffff] [ 0.209325] pnp 00:0d: >[mem 0x000e0000-0x000fffff] [ 0.209327] pnp 00:0d: >[mem 0x00100000-0xcfffffff] [ 0.209329] pnp 00:0d: >[mem 0x00000000-0xffffffffffffffff disabled] [ 0.209383] system 00:0d: >[mem 0x00000000-0x0009ffff] could not be reserved [ 0.209386] system 00:0d: >[mem 0x000c0000-0x000cffff] could not be reserved [ 0.209388] system 00:0d: >[mem 0x000e0000-0x000fffff] could not be reserved [ 0.209390] system 00:0d: >[mem 0x00100000-0xcfffffff] could not be reserved [ 0.209394] system 00:0d: >Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.209499] pnp: PnP ACPI: found 14 devices [ 0.209501] ACPI: ACPI bus type pnp unregistered [ 0.217205] pci 0000:00:1c.0: >bridge window [io 0x1000-0x0fff] to [bus 05-05] add_size 1000 [ 0.217209] pci 0000:00:1c.0: >bridge window [mem 0x00100000-0x000fffff] to [bus 05-05] add_size 400000 [ 0.217218] pci 0000:00:1c.2: >bridge window [io 0x1000-0x0fff] to [bus 04-04] add_size 1000 [ 0.217221] pci 0000:00:1c.2: >bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04-04] add_size 200000 [ 0.217230] pci 0000:00:1c.4: >bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03-03] add_size 200000 [ 0.217239] pci 0000:00:1c.5: >bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02-02] add_size 200000 [ 0.217254] pci 0000:00:1c.0: >res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 400000 [ 0.217256] pci 0000:00:1c.2: >res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.217259] pci 0000:00:1c.4: >res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.217261] pci 0000:00:1c.5: >res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.217263] pci 0000:00:1c.0: >res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 0.217266] pci 0000:00:1c.2: >res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 0.217271] pci 0000:00:1c.0: >BAR 14: assigned [mem 0xf0000000-0xf03fffff] [ 0.217274] pci 0000:00:1c.2: >BAR 15: assigned [mem 0xf0400000-0xf05fffff 64bit pref] [ 0.217277] pci 0000:00:1c.4: >BAR 15: assigned [mem 0xf0600000-0xf07fffff 64bit pref] [ 0.217279] pci 0000:00:1c.5: >BAR 15: assigned [mem 0xf0800000-0xf09fffff 64bit pref] [ 0.217282] pci 0000:00:1c.0: >BAR 13: assigned [io 0x1000-0x1fff] [ 0.217285] pci 0000:00:1c.2: >BAR 13: assigned [io 0x2000-0x2fff] [ 0.217288] pci 0000:00:01.0: >PCI bridge to [bus 01-01] [ 0.217291] pci 0000:00:01.0: > bridge window [io 0xb000-0xbfff] [ 0.217295] pci 0000:00:01.0: > bridge window [mem 0xfe700000-0xfe7fffff] [ 0.217298] pci 0000:00:01.0: > bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.217302] pci 0000:00:1c.0: >PCI bridge to [bus 05-05] [ 0.217305] pci 0000:00:1c.0: > bridge window [io 0x1000-0x1fff] [ 0.217309] pci 0000:00:1c.0: > bridge window [mem 0xf0000000-0xf03fffff] [ 0.217313] pci 0000:00:1c.0: > bridge window [mem 0xfdf00000-0xfdffffff 64bit pref] [ 0.217318] pci 0000:00:1c.2: >PCI bridge to [bus 04-04] [ 0.217321] pci 0000:00:1c.2: > bridge window [io 0x2000-0x2fff] [ 0.217326] pci 0000:00:1c.2: > bridge window [mem 0xfea00000-0xfeafffff] [ 0.217329] pci 0000:00:1c.2: > bridge window [mem 0xf0400000-0xf05fffff 64bit pref] [ 0.217335] pci 0000:00:1c.4: >PCI bridge to [bus 03-03] [ 0.217338] pci 0000:00:1c.4: > bridge window [io 0xd000-0xdfff] [ 0.217342] pci 0000:00:1c.4: > bridge window [mem 0xfe900000-0xfe9fffff] [ 0.217346] pci 0000:00:1c.4: > bridge window [mem 0xf0600000-0xf07fffff 64bit pref] [ 0.217351] pci 0000:00:1c.5: >PCI bridge to [bus 02-02] [ 0.217354] pci 0000:00:1c.5: > bridge window [io 0xc000-0xcfff] [ 0.217359] pci 0000:00:1c.5: > bridge window [mem 0xfe800000-0xfe8fffff] [ 0.217362] pci 0000:00:1c.5: > bridge window [mem 0xf0800000-0xf09fffff 64bit pref] [ 0.217368] pci 0000:00:1e.0: >PCI bridge to [bus 06-06] [ 0.217371] pci 0000:00:1e.0: > bridge window [io 0xe000-0xefff] [ 0.217376] pci 0000:00:1e.0: > bridge window [mem 0xfeb00000-0xfebfffff] [ 0.217401] pci 0000:00:1c.0: >enabling device (0106 -> 0107) [ 0.217411] pci 0000:00:1c.2: >enabling device (0106 -> 0107) [ 0.217428] pci 0000:00:1e.0: >setting latency timer to 64 [ 0.217432] pci_bus 0000:00: >resource 4 [io 0x0000-0xffff] [ 0.217434] pci_bus 0000:00: >resource 5 [mem 0x00000000-0xfffffffff] [ 0.217436] pci_bus 0000:01: >resource 0 [io 0xb000-0xbfff] [ 0.217438] pci_bus 0000:01: >resource 1 [mem 0xfe700000-0xfe7fffff] [ 0.217440] pci_bus 0000:01: >resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.217442] pci_bus 0000:05: >resource 0 [io 0x1000-0x1fff] [ 0.217444] pci_bus 0000:05: >resource 1 [mem 0xf0000000-0xf03fffff] [ 0.217446] pci_bus 0000:05: >resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref] [ 0.217448] pci_bus 0000:04: >resource 0 [io 0x2000-0x2fff] [ 0.217450] pci_bus 0000:04: >resource 1 [mem 0xfea00000-0xfeafffff] [ 0.217453] pci_bus 0000:04: >resource 2 [mem 0xf0400000-0xf05fffff 64bit pref] [ 0.217455] pci_bus 0000:03: >resource 0 [io 0xd000-0xdfff] [ 0.217457] pci_bus 0000:03: >resource 1 [mem 0xfe900000-0xfe9fffff] [ 0.217459] pci_bus 0000:03: >resource 2 [mem 0xf0600000-0xf07fffff 64bit pref] [ 0.217461] pci_bus 0000:02: >resource 0 [io 0xc000-0xcfff] [ 0.217463] pci_bus 0000:02: >resource 1 [mem 0xfe800000-0xfe8fffff] [ 0.217465] pci_bus 0000:02: >resource 2 [mem 0xf0800000-0xf09fffff 64bit pref] [ 0.217468] pci_bus 0000:06: >resource 0 [io 0xe000-0xefff] [ 0.217470] pci_bus 0000:06: >resource 1 [mem 0xfeb00000-0xfebfffff] [ 0.217472] pci_bus 0000:06: >resource 4 [io 0x0000-0xffff] [ 0.217474] pci_bus 0000:06: >resource 5 [mem 0x00000000-0xfffffffff] [ 0.217515] NET: Registered protocol family 2 [ 0.217709] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.218941] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.222499] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.222956] TCP: Hash tables configured (established 524288 bind 65536) [ 0.222958] TCP: reno registered [ 0.222972] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.223037] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.223183] NET: Registered protocol family 1 [ 0.223430] pci 0000:01:00.0: >Boot video device [ 0.223487] PCI: CLS 32 bytes, default 64 [ 0.223490] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.223492] software IO TLB [mem 0xcbf76000-0xcff75fff] (64MB) mapped at [ffff8800cbf76000-ffff8800cff75fff] [ 0.224048] audit: initializing netlink socket (disabled) [ 0.224059] type=2000 audit(1353260435.220:1): initialized [ 0.244770] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.247049] VFS: Disk quotas dquot_6.5.2 [ 0.247093] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.247609] fuse init (API version 7.19) [ 0.247701] msgmni has been set to 15936 [ 0.248262] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.248312] io scheduler noop registered [ 0.248314] io scheduler deadline registered (default) [ 0.248345] io scheduler cfq registered [ 0.248475] pcieport 0000:00:01.0: >irq 40 for MSI/MSI-X [ 0.248547] pcieport 0000:00:1c.0: >irq 41 for MSI/MSI-X [ 0.248634] pcieport 0000:00:1c.2: >irq 42 for MSI/MSI-X [ 0.248714] pcieport 0000:00:1c.4: >irq 43 for MSI/MSI-X [ 0.248799] pcieport 0000:00:1c.5: >irq 44 for MSI/MSI-X [ 0.248871] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.248889] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.248940] intel_idle: does not run on family 6 model 15 [ 0.249020] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 0.249026] ACPI: Power Button [PWRB] [ 0.249064] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.249067] ACPI: Power Button [PWRF] [ 0.249148] ACPI: Requesting acpi_cpufreq [ 0.377644] Freeing initrd memory: 14872k freed [ 0.387020] GHES: HEST is not enabled! [ 0.387135] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.407481] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.429441] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.429749] Linux agpgart interface v0.103 [ 0.431659] brd: module loaded [ 0.432662] loop: module loaded [ 0.432766] ahci 0000:00:1f.2: >version 3.0 [ 0.432837] ahci 0000:00:1f.2: >irq 45 for MSI/MSI-X [ 0.432881] ahci: SSS flag set, parallel bus scan disabled [ 0.432912] ahci 0000:00:1f.2: >AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 0.432915] ahci 0000:00:1f.2: >flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems sxs [ 0.432919] ahci 0000:00:1f.2: >setting latency timer to 64 [ 0.472536] scsi0 : ahci [ 0.472632] scsi1 : ahci [ 0.472713] scsi2 : ahci [ 0.472791] scsi3 : ahci [ 0.472877] scsi4 : ahci [ 0.472955] scsi5 : ahci [ 0.473081] ata1: SATA max UDMA/133 abar m2048@0xfe6fe800 port 0xfe6fe900 irq 45 [ 0.473084] ata2: SATA max UDMA/133 abar m2048@0xfe6fe800 port 0xfe6fe980 irq 45 [ 0.473086] ata3: SATA max UDMA/133 abar m2048@0xfe6fe800 port 0xfe6fea00 irq 45 [ 0.473088] ata4: SATA max UDMA/133 abar m2048@0xfe6fe800 port 0xfe6fea80 irq 45 [ 0.473090] ata5: SATA max UDMA/133 abar m2048@0xfe6fe800 port 0xfe6feb00 irq 45 [ 0.473092] ata6: SATA max UDMA/133 abar m2048@0xfe6fe800 port 0xfe6feb80 irq 45 [ 0.488060] ahci 0000:03:00.0: >AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 0.488065] ahci 0000:03:00.0: >flags: 64bit ncq pm led clo pmp pio slum part [ 0.488386] scsi6 : ahci [ 0.488464] scsi7 : ahci [ 0.488544] ata7: SATA max UDMA/133 abar m8192@0xfe9fe000 port 0xfe9fe100 irq 16 [ 0.488547] ata8: SATA max UDMA/133 abar m8192@0xfe9fe000 port 0xfe9fe180 irq 16 [ 0.488627] pata_acpi 0000:03:00.1: >enabling device (0000 -> 0001) [ 0.488668] pata_acpi 0000:03:00.1: >setting latency timer to 64 [ 0.488903] Fixed MDIO Bus: probed [ 0.488944] tun: Universal TUN/TAP device driver, 1.6 [ 0.488946] tun: (C) 1999-2004 Max Krasnyansky [ 0.489031] PPP generic driver version 2.4.2 [ 0.489086] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.489120] ehci_hcd 0000:00:1a.7: >setting latency timer to 64 [ 0.489123] ehci_hcd 0000:00:1a.7: >EHCI Host Controller [ 0.489130] ehci_hcd 0000:00:1a.7: >new USB bus registered, assigned bus number 1 [ 0.489158] ehci_hcd 0000:00:1a.7: >debug port 1 [ 0.493048] ehci_hcd 0000:00:1a.7: >cache line size of 32 is not supported [ 0.493060] ehci_hcd 0000:00:1a.7: >irq 18, io mem 0xfe6ffc00 [ 0.504023] ehci_hcd 0000:00:1a.7: >USB 2.0 started, EHCI 1.00 [ 0.504052] usb usb1: >New USB device found, idVendor=1d6b, idProduct=0002 [ 0.504055] usb usb1: >New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.504058] usb usb1: >Product: EHCI Host Controller [ 0.504061] usb usb1: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd [ 0.504064] usb usb1: >SerialNumber: 0000:00:1a.7 [ 0.504203] hub 1-0:1.0: >USB hub found [ 0.504208] hub 1-0:1.0: >6 ports detected [ 0.504280] ehci_hcd 0000:00:1d.7: >setting latency timer to 64 [ 0.504283] ehci_hcd 0000:00:1d.7: >EHCI Host Controller [ 0.504288] ehci_hcd 0000:00:1d.7: >new USB bus registered, assigned bus number 2 [ 0.504311] ehci_hcd 0000:00:1d.7: >debug port 1 [ 0.508187] ehci_hcd 0000:00:1d.7: >cache line size of 32 is not supported [ 0.508201] ehci_hcd 0000:00:1d.7: >irq 23, io mem 0xfe6ff800 [ 0.520021] ehci_hcd 0000:00:1d.7: >USB 2.0 started, EHCI 1.00 [ 0.520039] usb usb2: >New USB device found, idVendor=1d6b, idProduct=0002 [ 0.520043] usb usb2: >New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.520046] usb usb2: >Product: EHCI Host Controller [ 0.520049] usb usb2: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd [ 0.520052] usb usb2: >SerialNumber: 0000:00:1d.7 [ 0.520179] hub 2-0:1.0: >USB hub found [ 0.520184] hub 2-0:1.0: >6 ports detected [ 0.520246] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.520262] uhci_hcd: USB Universal Host Controller Interface driver [ 0.520278] uhci_hcd 0000:00:1a.0: >setting latency timer to 64 [ 0.520281] uhci_hcd 0000:00:1a.0: >UHCI Host Controller [ 0.520286] uhci_hcd 0000:00:1a.0: >new USB bus registered, assigned bus number 3 [ 0.520307] uhci_hcd 0000:00:1a.0: >irq 16, io base 0x0000a800 [ 0.520337] usb usb3: >New USB device found, idVendor=1d6b, idProduct=0001 [ 0.520340] usb usb3: >New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.520342] usb usb3: >Product: UHCI Host Controller [ 0.520344] usb usb3: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd [ 0.520345] usb usb3: >SerialNumber: 0000:00:1a.0 [ 0.520464] hub 3-0:1.0: >USB hub found [ 0.520468] hub 3-0:1.0: >2 ports detected [ 0.520526] uhci_hcd 0000:00:1a.1: >setting latency timer to 64 [ 0.520529] uhci_hcd 0000:00:1a.1: >UHCI Host Controller [ 0.520534] uhci_hcd 0000:00:1a.1: >new USB bus registered, assigned bus number 4 [ 0.520565] uhci_hcd 0000:00:1a.1: >irq 21, io base 0x0000a880 [ 0.520595] usb usb4: >New USB device found, idVendor=1d6b, idProduct=0001 [ 0.520598] usb usb4: >New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.520600] usb usb4: >Product: UHCI Host Controller [ 0.520602] usb usb4: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd [ 0.520604] usb usb4: >SerialNumber: 0000:00:1a.1 [ 0.520718] hub 4-0:1.0: >USB hub found [ 0.520721] hub 4-0:1.0: >2 ports detected [ 0.520778] uhci_hcd 0000:00:1a.2: >setting latency timer to 64 [ 0.520781] uhci_hcd 0000:00:1a.2: >UHCI Host Controller [ 0.520785] uhci_hcd 0000:00:1a.2: >new USB bus registered, assigned bus number 5 [ 0.520805] uhci_hcd 0000:00:1a.2: >irq 18, io base 0x0000ac00 [ 0.520835] usb usb5: >New USB device found, idVendor=1d6b, idProduct=0001 [ 0.520837] usb usb5: >New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.520840] usb usb5: >Product: UHCI Host Controller [ 0.520841] usb usb5: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd [ 0.520844] usb usb5: >SerialNumber: 0000:00:1a.2 [ 0.520953] hub 5-0:1.0: >USB hub found [ 0.520957] hub 5-0:1.0: >2 ports detected [ 0.521015] uhci_hcd 0000:00:1d.0: >setting latency timer to 64 [ 0.521018] uhci_hcd 0000:00:1d.0: >UHCI Host Controller [ 0.521023] uhci_hcd 0000:00:1d.0: >new USB bus registered, assigned bus number 6 [ 0.521043] uhci_hcd 0000:00:1d.0: >irq 23, io base 0x0000a080 [ 0.521073] usb usb6: >New USB device found, idVendor=1d6b, idProduct=0001 [ 0.521075] usb usb6: >New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.521077] usb usb6: >Product: UHCI Host Controller [ 0.521079] usb usb6: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd [ 0.521081] usb usb6: >SerialNumber: 0000:00:1d.0 [ 0.521191] hub 6-0:1.0: >USB hub found [ 0.521195] hub 6-0:1.0: >2 ports detected [ 0.521252] uhci_hcd 0000:00:1d.1: >setting latency timer to 64 [ 0.521255] uhci_hcd 0000:00:1d.1: >UHCI Host Controller [ 0.521259] uhci_hcd 0000:00:1d.1: >new USB bus registered, assigned bus number 7 [ 0.521287] uhci_hcd 0000:00:1d.1: >irq 19, io base 0x0000a400 [ 0.521314] usb usb7: >New USB device found, idVendor=1d6b, idProduct=0001 [ 0.521317] usb usb7: >New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.521319] usb usb7: >Product: UHCI Host Controller [ 0.521321] usb usb7: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd [ 0.521323] usb usb7: >SerialNumber: 0000:00:1d.1 [ 0.521434] hub 7-0:1.0: >USB hub found [ 0.521438] hub 7-0:1.0: >2 ports detected [ 0.521497] uhci_hcd 0000:00:1d.2: >setting latency timer to 64 [ 0.521501] uhci_hcd 0000:00:1d.2: >UHCI Host Controller [ 0.521507] uhci_hcd 0000:00:1d.2: >new USB bus registered, assigned bus number 8 [ 0.521527] uhci_hcd 0000:00:1d.2: >irq 18, io base 0x0000a480 [ 0.521555] usb usb8: >New USB device found, idVendor=1d6b, idProduct=0001 [ 0.521558] usb usb8: >New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.521560] usb usb8: >Product: UHCI Host Controller [ 0.521562] usb usb8: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd [ 0.521564] usb usb8: >SerialNumber: 0000:00:1d.2 [ 0.521674] hub 8-0:1.0: >USB hub found [ 0.521677] hub 8-0:1.0: >2 ports detected [ 0.521753] xhci_hcd 0000:04:00.0: >xHCI Host Controller [ 0.521758] xhci_hcd 0000:04:00.0: >new USB bus registered, assigned bus number 9 [ 0.521949] xhci_hcd 0000:04:00.0: >irq 18, io mem 0xfeaff000 [ 0.522009] xhci_hcd 0000:04:00.0: >irq 46 for MSI/MSI-X [ 0.522061] usb usb9: >New USB device found, idVendor=1d6b, idProduct=0002 [ 0.522063] usb usb9: >New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.522066] usb usb9: >Product: xHCI Host Controller [ 0.522068] usb usb9: >Manufacturer: Linux 3.5.0-17-generic xhci_hcd [ 0.522070] usb usb9: >SerialNumber: 0000:04:00.0 [ 0.522164] xHCI xhci_add_endpoint called for root hub [ 0.522166] xHCI xhci_check_bandwidth called for root hub [ 0.522187] hub 9-0:1.0: >USB hub found [ 0.522193] hub 9-0:1.0: >1 port detected [ 0.522238] xhci_hcd 0000:04:00.0: >xHCI Host Controller [ 0.522242] xhci_hcd 0000:04:00.0: >new USB bus registered, assigned bus number 10 [ 0.522269] usb usb10: >New USB device found, idVendor=1d6b, idProduct=0003 [ 0.522272] usb usb10: >New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.522274] usb usb10: >Product: xHCI Host Controller [ 0.522278] usb usb10: >Manufacturer: Linux 3.5.0-17-generic xhci_hcd [ 0.522280] usb usb10: >SerialNumber: 0000:04:00.0 [ 0.522371] xHCI xhci_add_endpoint called for root hub [ 0.522373] xHCI xhci_check_bandwidth called for root hub [ 0.522395] hub 10-0:1.0: >USB hub found [ 0.522403] hub 10-0:1.0: >4 ports detected [ 0.522527] usbcore: registered new interface driver libusual [ 0.522561] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 0.522563] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 0.523042] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.523167] mousedev: PS/2 mouse device common for all mice [ 0.523357] rtc_cmos 00:03: >RTC can wake from S4 [ 0.523490] rtc_cmos 00:03: >rtc core: registered rtc_cmos as rtc0 [ 0.523518] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.523588] device-mapper: uevent: version 1.0.3 [ 0.523672] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 0.523681] cpuidle: using governor ladder [ 0.523683] cpuidle: using governor menu [ 0.523685] EFI Variables Facility v0.08 2004-May-17 [ 0.523915] ashmem: initialized [ 0.524077] TCP: cubic registered [ 0.524172] NET: Registered protocol family 10 [ 0.524362] NET: Registered protocol family 17 [ 0.524373] Key type dns_resolver registered [ 0.524542] PM: Hibernation image not present or could not be loaded. [ 0.524565] registered taskstats version 1 [ 0.527331] Key type trusted registered [ 0.529341] Key type encrypted registered [ 0.531681] Magic number: 4:320:694 [ 0.531814] rtc_cmos 00:03: >setting system clock to 2012-11-18 17:40:36 UTC (1353260436) [ 0.532481] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.532483] EDD information not available. [ 0.792031] ata1: SATA link down (SStatus 0 SControl 300) [ 0.808044] ata7: SATA link down (SStatus 0 SControl 300) [ 0.808076] ata8: SATA link down (SStatus 0 SControl 300) [ 0.816029] usb 1-5: >new high-speed USB device number 2 using ehci_hcd [ 0.949616] usb 1-5: >New USB device found, idVendor=11b0, idProduct=6566 [ 0.949620] usb 1-5: >New USB device strings: Mfr=1, Product=2, SerialNumber=4 [ 0.949624] usb 1-5: >Product: PRO-Gear XM-4U [ 0.949627] usb 1-5: >Manufacturer: Atech Flash [ 0.949630] usb 1-5: >SerialNumber: 606569746801 [ 0.951200] Initializing USB Mass Storage driver... [ 0.951361] scsi8 : usb-storage 1-5:1.0 [ 0.951429] usbcore: registered new interface driver usb-storage [ 0.951430] USB Mass Storage support registered. [ 1.060062] usb 2-1: >new high-speed USB device number 2 using ehci_hcd [ 1.112029] ata2: SATA link down (SStatus 0 SControl 300) [ 1.192373] usb 2-1: >New USB device found, idVendor=0424, idProduct=2502 [ 1.192377] usb 2-1: >New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.192551] hub 2-1:1.0: >USB hub found [ 1.192621] hub 2-1:1.0: >2 ports detected [ 1.220046] Refined TSC clocksource calibration: 2400.084 MHz. [ 1.220051] Switching to clocksource tsc [ 1.304026] usb 2-4: >new high-speed USB device number 3 using ehci_hcd [ 1.564874] usb 2-4: >New USB device found, idVendor=046d, idProduct=0990 [ 1.564879] usb 2-4: >New USB device strings: Mfr=0, Product=0, SerialNumber=2 [ 1.564882] usb 2-4: >SerialNumber: 8D207A1E [ 1.604041] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.604499] ata3.00: ATA-8: WDC SSC-D0064SC-2100, 5.12, max UDMA/133 [ 1.604502] ata3.00: 125045424 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.604980] ata3.00: configured for UDMA/133 [ 1.605110] scsi 2:0:0:0: >Direct-Access ATA WDC SSC-D0064SC- 5.12 PQ: 0 ANSI: 5 [ 1.605200] sd 2:0:0:0: >[sda] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB) [ 1.605244] sd 2:0:0:0: >Attached scsi generic sg0 type 0 [ 1.605277] sd 2:0:0:0: >[sda] Write Protect is off [ 1.605280] sd 2:0:0:0: >[sda] Mode Sense: 00 3a 00 00 [ 1.605308] sd 2:0:0:0: >[sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.605766] sda: sda1 [ 1.606001] sd 2:0:0:0: >[sda] Attached SCSI disk [ 1.948756] scsi 8:0:0:0: >Direct-Access USB2.0 CardReader CF 0100 PQ: 0 ANSI: 0 [ 1.949260] scsi 8:0:0:1: >Direct-Access USB2.0 CardReader SM XD 0100 PQ: 0 ANSI: 0 [ 1.949759] scsi 8:0:0:2: >Direct-Access USB2.0 CardReader MS 0100 PQ: 0 ANSI: 0 [ 1.950252] scsi 8:0:0:3: >Direct-Access USB2.0 CardReader SD 0100 PQ: 0 ANSI: 0 [ 1.950755] sd 8:0:0:0: >Attached scsi generic sg1 type 0 [ 1.950879] sd 8:0:0:1: >Attached scsi generic sg2 type 0 [ 1.951004] sd 8:0:0:2: >Attached scsi generic sg3 type 0 [ 1.951128] sd 8:0:0:3: >Attached scsi generic sg4 type 0 [ 1.957363] sd 8:0:0:0: >[sdb] Attached SCSI removable disk [ 1.958114] sd 8:0:0:1: >[sdc] Attached SCSI removable disk [ 1.958861] sd 8:0:0:2: >[sdd] Attached SCSI removable disk [ 1.959613] sd 8:0:0:3: >[sde] Attached SCSI removable disk [ 1.972024] usb 8-1: >new full-speed USB device number 2 using uhci_hcd [ 2.096041] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.142521] ata4.00: ATA-7: ST3500641AS, 3.AAJ, max UDMA/133 [ 2.142525] ata4.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 2.157565] usb 8-1: >New USB device found, idVendor=046d, idProduct=c52b [ 2.157569] usb 8-1: >New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.157572] usb 8-1: >Product: USB Receiver [ 2.157576] usb 8-1: >Manufacturer: Logitech [ 2.209158] ata4.00: configured for UDMA/133 [ 2.209254] scsi 3:0:0:0: >Direct-Access ATA ST3500641AS 3.AA PQ: 0 ANSI: 5 [ 2.209360] sd 3:0:0:0: >[sdf] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 2.209379] sd 3:0:0:0: >Attached scsi generic sg5 type 0 [ 2.209403] sd 3:0:0:0: >[sdf] Write Protect is off [ 2.209406] sd 3:0:0:0: >[sdf] Mode Sense: 00 3a 00 00 [ 2.209428] sd 3:0:0:0: >[sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.275802] sdf: sdf1 sdf2 < sdf5 > [ 2.276111] sd 3:0:0:0: >[sdf] Attached SCSI disk [ 2.400030] usb 8-2: >new low-speed USB device number 3 using uhci_hcd [ 2.528047] ata5: SATA link down (SStatus 0 SControl 300) [ 2.582564] usb 8-2: >New USB device found, idVendor=045e, idProduct=00db [ 2.582569] usb 8-2: >New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.582572] usb 8-2: >Product: Natural\xffffffc2\xffffffae\xffffffae Ergonomic Keyboard 4000 [ 2.582575] usb 8-2: >Manufacturer: Microsoft [ 2.696022] usb 9-1: >new high-speed USB device number 2 using xhci_hcd [ 2.712770] usb 9-1: >New USB device found, idVendor=2109, idProduct=0811 [ 2.712775] usb 9-1: >New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.712778] usb 9-1: >Product: USB2.0 Hub [ 2.713209] hub 9-1:1.0: >USB hub found [ 2.713328] hub 9-1:1.0: >4 ports detected [ 2.792129] usb 2-1.1: >new high-speed USB device number 6 using ehci_hcd [ 2.884375] usb 2-1.1: >New USB device found, idVendor=0424, idProduct=2602 [ 2.884379] usb 2-1.1: >New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.884552] hub 2-1.1:1.0: >USB hub found [ 2.884620] hub 2-1.1:1.0: >4 ports detected [ 3.020021] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.031956] ata6.00: ATA-8: OCZ-AGILITY3, 2.15, max UDMA/133 [ 3.031960] ata6.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 3.041957] ata6.00: configured for UDMA/133 [ 3.042057] scsi 5:0:0:0: >Direct-Access ATA OCZ-AGILITY3 2.15 PQ: 0 ANSI: 5 [ 3.042164] sd 5:0:0:0: >[sdg] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB) [ 3.042186] sd 5:0:0:0: >Attached scsi generic sg6 type 0 [ 3.042224] sd 5:0:0:0: >[sdg] Write Protect is off [ 3.042227] sd 5:0:0:0: >[sdg] Mode Sense: 00 3a 00 00 [ 3.042252] sd 5:0:0:0: >[sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.042575] sdg: sdg1 [ 3.042810] sd 5:0:0:0: >[sdg] Attached SCSI disk [ 3.044012] Freeing unused kernel memory: 928k freed [ 3.044250] Write protecting the kernel read-only data: 12288k [ 3.048484] Freeing unused kernel memory: 1472k freed [ 3.051878] Freeing unused kernel memory: 1124k freed [ 3.067357] udevd[124]: starting version 175 [ 3.110246] sky2: driver version 1.30 [ 3.110328] sky2 0000:02:00.0: >Yukon-2 EC Ultra chip revision 3 [ 3.110421] sky2 0000:02:00.0: >irq 47 for MSI/MSI-X [ 3.111655] pata_jmicron 0000:03:00.1: >setting latency timer to 64 [ 3.113241] sky2 0000:02:00.0: >eth0: addr 00:1b:fc:fc:f5:39 [ 3.113256] scsi9 : pata_jmicron [ 3.113718] scsi10 : pata_jmicron [ 3.114177] ata9: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 17 [ 3.114180] ata10: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 17 [ 3.160646] usbcore: registered new interface driver usbhid [ 3.160650] usbhid: USB HID core driver [ 3.164136] firewire_ohci 0000:06:03.0: >added OHCI v1.0 device as card 0, 8 IR + 8 IT contexts, quirks 0x0 [ 3.164181] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.164263] r8169 0000:06:04.0: >(unregistered net_device): not PCI Express [ 3.164436] r8169 0000:06:04.0: >eth1: RTL8169sc/8110sc at 0xffffc9001178ec00, 00:1b:fc:fc:f2:7e, XID 18000000 IRQ 16 [ 3.164439] r8169 0000:06:04.0: >eth1: jumbo features [frames: 7152 bytes, tx checksumming: ok] [ 3.212143] usb 9-1.1: >new low-speed USB device number 3 using xhci_hcd [ 3.226765] input: Microsoft Natural\xffffffc2\xffffffae\xffffffae Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/input/input2 [ 3.226851] microsoft 0003:045E:00DB.0004: >input,hidraw0: USB HID v1.11 Keyboard [Microsoft Natural\xffffffc2\xffffffae\xffffffae Ergonomic Keyboard 4000] on usb-0000:00:1d.2-2/input0 [ 3.231762] usb 9-1.1: >New USB device found, idVendor=15c2, idProduct=ffdc [ 3.231767] usb 9-1.1: >New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.231854] usb 9-1.1: >ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 3.231859] usb 9-1.1: >ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes [ 3.233714] input: Microsoft Natural\xffffffc2\xffffffae\xffffffae Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.1/input/input3 [ 3.233846] microsoft 0003:045E:00DB.0005: >input,hidraw1: USB HID v1.11 Device [Microsoft Natural\xffffffc2\xffffffae\xffffffae Ergonomic Keyboard 4000] on usb-0000:00:1d.2-2/input1 [ 3.242696] logitech-djreceiver 0003:046D:C52B.0003: >hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.2-1/input2 [ 3.245870] input: Logitech Unifying Device. Wireless PID:1028 as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.2/0003:046D:C52B.0003/input/input4 [ 3.245967] logitech-djdevice 0003:046D:C52B.0006: >input,hidraw3: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:1028] on usb-0000:00:1d.2-1:1 [ 3.276524] ata9.01: ATAPI: SONY DVD RW DRU-840A, SS00, max UDMA/66 [ 3.292509] ata9.01: configured for UDMA/66 [ 3.294103] scsi 9:0:1:0: >CD-ROM SONY DVD RW DRU-840A SS00 PQ: 0 ANSI: 5 [ 3.296485] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.296488] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 3.296622] sr 9:0:1:0: >Attached scsi CD-ROM sr0 [ 3.296776] sr 9:0:1:0: >Attached scsi generic sg7 type 5 [ 3.304131] usb 2-1.1.1: >new high-speed USB device number 7 using ehci_hcd [ 3.486499] usb 2-1.1.1: >New USB device found, idVendor=0424, idProduct=2228 [ 3.486505] usb 2-1.1.1: >New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.486509] usb 2-1.1.1: >Product: Flash Card Reader [ 3.486512] usb 2-1.1.1: >Manufacturer: Generic [ 3.486515] usb 2-1.1.1: >SerialNumber: 26020128B005 [ 3.486864] scsi11 : usb-storage 2-1.1.1:1.0 [ 3.664108] firewire_core 0000:06:03.0: created device fw0: GUID 0011d80001619615, S400 [ 4.181895] EXT4-fs (sdg1): mounted filesystem with ordered data mode. Opts: (null) [ 4.355295] Adding 17342132k swap on /dev/sdf5. Priority:-1 extents:1 across:17342132k [ 4.363917] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 4.363926] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 4.368062] udevd[403]: starting version 175 [ 4.388557] lp: driver loaded but no devices found [ 4.435056] EXT4-fs (sdg1): re-mounted. Opts: errors=remount-ro [ 4.438132] [drm] Initialized drm 1.1.0 20060810 [ 4.464860] [drm] radeon defaulting to kernel modesetting. [ 4.464864] [drm] radeon kernel modesetting enabled. [ 4.466957] [drm] initializing kernel modesetting (RV630 0x1002:0x9588 0x1002:0x1002). [ 4.466990] [drm] register mmio base: 0xFE7E0000 [ 4.466991] [drm] register mmio size: 65536 [ 4.467135] ATOM BIOS: DMA [ 4.467174] radeon 0000:01:00.0: >VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used) [ 4.467177] radeon 0000:01:00.0: >GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF [ 4.470633] [drm] Detected VRAM RAM=512M, BAR=256M [ 4.470637] [drm] RAM width 128bits DDR [ 4.471444] [TTM] Zone kernel: Available graphics memory: 4088860 kiB [ 4.471448] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 4.471449] [TTM] Initializing pool allocator [ 4.471454] [TTM] Initializing DMA pool allocator [ 4.471479] [drm] radeon: 512M of VRAM memory ready [ 4.471482] [drm] radeon: 512M of GTT memory ready. [ 4.471504] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 4.471505] [drm] Driver supports precise vblank timestamp query. [ 4.471550] radeon 0000:01:00.0: >irq 48 for MSI/MSI-X [ 4.471560] radeon 0000:01:00.0: >radeon: using MSI. [ 4.471590] [drm] radeon: irq initialized. [ 4.471595] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 4.472603] [drm] Loading RV630 Microcode [ 4.495269] scsi 11:0:0:0: >Direct-Access Generic Flash HS-CF 4.44 PQ: 0 ANSI: 0 [ 4.498622] scsi 11:0:0:1: >Direct-Access Generic Flash HS-COMBO 4.44 PQ: 0 ANSI: 0 [ 4.499435] sd 11:0:0:0: >Attached scsi generic sg8 type 0 [ 4.500040] sd 11:0:0:1: >Attached scsi generic sg9 type 0 [ 4.553910] ACPI Warning: 0x0000000000000830-0x0000000000000833 SystemIO conflicts with Region \_SB_.PCI0.SBRG.SMIE 1 (20120320/utaddress-251) [ 4.553918] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 4.553920] lpc_ich: Resource conflict(s) found affecting iTCO_wdt [ 4.566143] sd 11:0:0:0: >[sdh] Attached SCSI removable disk [ 4.570028] sd 11:0:0:1: >[sdi] Attached SCSI removable disk [ 4.571363] input: iMON Panel, Knob and Mouse(15c2:ffdc) as /devices/pci0000:00/0000:00:1c.2/0000:04:00.0/usb9/9-1/9-1.1/9-1.1:1.0/input/input5 [ 4.572321] snd_hda_intel 0000:00:1b.0: >irq 49 for MSI/MSI-X [ 4.573991] Linux video capture interface: v2.00 [ 4.577181] uvcvideo: Found UVC 1.00 device (046d:0990) [ 4.592866] input: UVC Camera (046d:0990) as /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4:1.0/input/input6 [ 4.593036] usbcore: registered new interface driver uvcvideo [ 4.593038] USB Video Class driver (1.1.1) [ 4.596087] imon 9-1.1:1.0: >Unknown 0xffdc device, defaulting to VFD and iMON IR [ 4.596091] (id 0x96) [ 4.620044] Registered IR keymap rc-imon-pad [ 4.620150] input: iMON Remote (15c2:ffdc) as /devices/pci0000:00/0000:00:1c.2/0000:04:00.0/usb9/9-1/9-1.1/9-1.1:1.0/rc/rc0/input7 [ 4.620201] rc0: iMON Remote (15c2:ffdc) as /devices/pci0000:00/0000:00:1c.2/0000:04:00.0/usb9/9-1/9-1.1/9-1.1:1.0/rc/rc0 [ 4.632096] imon 9-1.1:1.0: >iMON device (15c2:ffdc, intf0) on usb<9:3> initialized [ 4.632126] usbcore: registered new interface driver imon [ 4.664745] microcode: CPU0 sig=0x6fb, pf=0x10, revision=0xb3 [ 4.706849] coretemp coretemp.0: >Using relative temperature scale! [ 4.706866] coretemp coretemp.0: >Using relative temperature scale! [ 4.706877] coretemp coretemp.0: >Using relative temperature scale! [ 4.706890] coretemp coretemp.0: >Using relative temperature scale! [ 4.770977] gpio_ich: GPIO from 195 to 255 on gpio_ich [ 4.776157] microcode: CPU1 sig=0x6fb, pf=0x10, revision=0xb3 [ 4.782142] microcode: CPU2 sig=0x6fb, pf=0x10, revision=0xb3 [ 4.784250] microcode: CPU3 sig=0x6fb, pf=0x10, revision=0xb3 [ 4.784984] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000). [ 4.785060] radeon 0000:01:00.0: >WB enabled [ 4.785064] radeon 0000:01:00.0: >fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff880221644c00 [ 4.787140] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 4.816593] [drm] ring test on 0 succeeded in 1 usecs [ 4.816928] [drm] ib test on ring 0 succeeded in 0 usecs [ 4.817432] [drm] Radeon Display Connectors [ 4.817433] [drm] Connector 0: [ 4.817435] [drm] DVI-I-1 [ 4.817436] [drm] HPD2 [ 4.817438] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c [ 4.817439] [drm] Encoders: [ 4.817440] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 4.817442] [drm] DFP2: INTERNAL_LVTM1 [ 4.817443] [drm] Connector 1: [ 4.817444] [drm] DIN-1 [ 4.817445] [drm] Encoders: [ 4.817446] [drm] TV1: INTERNAL_KLDSCP_DAC2 [ 4.817447] [drm] Connector 2: [ 4.817449] [drm] DVI-I-2 [ 4.817450] [drm] HPD1 [ 4.817451] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c [ 4.817452] [drm] Encoders: [ 4.817454] [drm] CRT2: INTERNAL_KLDSCP_DAC2 [ 4.817455] [drm] DFP1: INTERNAL_KLDSCP_TMDS1 [ 4.817485] [drm] Internal thermal controller with fan control [ 4.817542] [drm] radeon: power management initialized [ 4.846046] usbcore: registered new interface driver snd-usb-audio [ 4.896211] [drm] fb mappable at 0xD0142000 [ 4.896215] [drm] vram apper at 0xD0000000 [ 4.896216] [drm] size 9216000 [ 4.896217] [drm] fb depth is 24 [ 4.896218] [drm] pitch is 7680 [ 4.896370] fbcon: radeondrmfb (fb0) is primary device [ 4.896602] Console: switching to colour frame buffer device 240x75 [ 4.896656] fb0: radeondrmfb frame buffer device [ 4.896658] drm: registered panic notifier [ 4.896664] [drm] Initialized radeon 2.18.0 20080528 for 0000:01:00.0 on minor 0 [ 4.961330] kjournald starting. Commit interval 5 seconds [ 4.961679] EXT3-fs (sdf1): using internal journal [ 4.961684] EXT3-fs (sdf1): mounted filesystem with ordered data mode [ 4.977661] hda-intel: 0000:01:00.1: Handle VGA-switcheroo audio client [ 4.977748] snd_hda_intel 0000:01:00.1: >irq 50 for MSI/MSI-X [ 4.991797] init: failsafe main process (945) killed by TERM signal [ 4.998919] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input8 [ 5.070886] ppdev: user-space parallel port driver [ 5.088475] Bluetooth: Core ver 2.16 [ 5.088499] NET: Registered protocol family 31 [ 5.088501] Bluetooth: HCI device and connection manager initialized [ 5.088503] Bluetooth: HCI socket layer initialized [ 5.088504] Bluetooth: L2CAP socket layer initialized [ 5.088510] Bluetooth: SCO socket layer initialized [ 5.095163] Bluetooth: RFCOMM TTY layer initialized [ 5.095169] Bluetooth: RFCOMM socket layer initialized [ 5.095170] Bluetooth: RFCOMM ver 1.11 [ 5.108058] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 5.108062] Bluetooth: BNEP filters: protocol multicast [ 5.123962] type=1400 audit(1353260441.086:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1032 comm="apparmor_parser" [ 5.124573] type=1400 audit(1353260441.090:3): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1032 comm="apparmor_parser" [ 5.225281] sky2 0000:02:00.0: >eth1: enabling interface [ 5.226190] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 5.226779] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 5.234703] r8169 0000:06:04.0: >eth0: link down [ 5.234728] r8169 0000:06:04.0: >eth0: link down [ 5.235529] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 5.236188] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 5.732789] type=1400 audit(1353260441.698:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=1110 comm="apparmor_parser" [ 5.733023] type=1400 audit(1353260441.698:5): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=1112 comm="apparmor_parser" [ 5.733111] type=1400 audit(1353260441.698:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper//chromium_browser" pid=1110 comm="apparmor_parser" [ 5.733271] type=1400 audit(1353260441.698:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1109 comm="apparmor_parser" [ 5.733418] type=1400 audit(1353260441.698:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1112 comm="apparmor_parser" [ 5.733594] type=1400 audit(1353260441.698:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=1109 comm="apparmor_parser" [ 5.733639] type=1400 audit(1353260441.698:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=1112 comm="apparmor_parser" [ 5.734132] type=1400 audit(1353260441.698:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper" pid=1111 comm="apparmor_parser" [ 5.734450] type=1400 audit(1353260441.698:12): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper//chromium_browser" pid=1111 comm="apparmor_parser" [ 5.738773] type=1400 audit(1353260441.702:13): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1116 comm="apparmor_parser" [ 5.814996] init: alsa-restore main process (1149) terminated with status 99 [ 7.567595] sky2 0000:02:00.0: >eth1: Link is up at 1000 Mbps, full duplex, flow control rx [ 7.568547] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 3951.645241] show_signal_msg: 33 callbacks suppressed [ 3951.645248] gtk-window-deco[3775]: segfault at 120a0000322a ip 00007fb1da587318 sp 00007fff7d5c2e90 error 4 in libglib-2.0.so.0.3400.0[7fb1da550000+f5000] [43554.768505] type=1701 audit(1353303990.734:25): auid=4294967295 uid=1026 gid=1000 ses=4294967295 pid=8976 comm="chromium-browse" reason="seccomp" sig=0 syscall=39 compat=0 ip=0x7fd7d3b09ed9 code=0x50000