--- tse3-0.2.7.orig/debian/rules +++ tse3-0.2.7/debian/rules @@ -0,0 +1,71 @@ +#!/usr/bin/make -f +# debian/rules for tse3 +# (c) 2001 Brian Russo, under GPL. +# (c) 2003-2004 Daniel Burrows (also under GPL) +# +# Based on: +# Sample debian/rules that uses debhelper. +# This file is public domain software, originally written by Joey Hess. + +# Uncomment this to turn on verbose mode. +#export DH_VERBOSE=1 + +build: build-stamp +build-stamp: + dh_testdir + + cp -f /usr/share/misc/config.guess /usr/share/misc/config.sub . + CXXFLAGS=-fPIC CFLAGS=-fPIC ./configure --prefix=/usr + --mandir=/usr/share/man --enable-shared \ + --enable-static + $(MAKE) + + touch build-stamp + +clean: + dh_testdir + dh_testroot + rm -f build-stamp + + - [ ! -f Makefile ] || $(MAKE) distclean + + dh_clean + + rm -f doc/trax.gif doc/tse3.gif doc/pete.jpeg doc/tse3logo.png + +install: build + dh_testdir + dh_testroot + dh_clean -k + dh_installdirs + + $(MAKE) install DESTDIR=$(CURDIR)/debian/tmp \ + docsdir=/usr/share/doc/libtse3-dev + rm debian/tmp/usr/share/doc/libtse3-dev/COPYING + +# Build architecture-independent files here. +binary-indep: build install + +# Build architecture-dependent files here. +binary-arch: build install + dh_testdir + dh_testroot + dh_installchangelogs -k doc/History + dh_installdirs usr/share/man/man3 + dh_installdocs + dh_installexamples + dh_installman + dh_install + dh_link + dh_strip + dh_compress + dh_fixperms + dh_makeshlibs + dh_installdeb + dh_shlibdeps -ldebian/libtse3-0.2.7/usr/lib -Llibtse3-0.2.7 + dh_gencontrol + dh_md5sums + dh_builddeb + +binary: binary-indep binary-arch +.PHONY: build clean binary-indep binary-arch binary install --- tse3-0.2.7.orig/debian/libtse3-dev.install +++ tse3-0.2.7/debian/libtse3-dev.install @@ -0,0 +1,5 @@ +debian/tmp/usr/include +debian/tmp/usr/lib/libtse3.a +debian/tmp/usr/lib/libtse3.so +debian/tmp/usr/share/doc +debian/tmp/usr/man/man3 usr/share/man/man3 --- tse3-0.2.7.orig/debian/changelog +++ tse3-0.2.7/debian/changelog @@ -0,0 +1,113 @@ +tse3 (0.2.7-5) unstable; urgency=low + + * Make libtse3-dev Depend on the library package, so that Build-Depends + of packages using it work as expected. + + -- Daniel Burrows Tue, 10 Aug 2004 11:52:45 -0400 + +tse3 (0.2.7-4) unstable; urgency=low + + * Modify the package to build a shared library whose soname is tied to + the current version of tse3 (via -release). This is far less than + ideal for a whole raft of reasons, but since upstream refuses to use + sonames and breaks binary compatibility at will, it is the only option + I can see for making this package sane; I now am of the opinion that + trying to support a pure static library is worse. + + -- Daniel Burrows Tue, 4 May 2004 18:21:58 -0400 + +tse3 (0.2.7-3) unstable; urgency=low + + * Ack -- it seems that this has never been updated for a modern + debhelper. Modified the stuff in debian/ to actually put files into + the final package. + * Don't bomb out when cleaning a clean directory. + * Upstream seems to have enabled shared libraries and disabled static + in configure.in, overriding configure arguments; switch back. + + -- Daniel Burrows Sun, 5 Oct 2003 12:23:43 -0400 + +tse3 (0.2.7-2) unstable; urgency=low + + * Apparently I accidentally backed out the Section change before I + uploaded the last version. Oops. + + -- Daniel Burrows Sun, 5 Oct 2003 12:10:14 -0400 + +tse3 (0.2.7-1) unstable; urgency=low + + * New upstream release + * Change Section in debian/control to libdevel (matching a change in + the override file) + + -- Daniel Burrows Sun, 5 Oct 2003 11:31:03 -0400 + +tse3 (0.2.5-2) unstable; urgency=low + + * Adopting this hairball, since noteedit needs it. (Closes: #174124) + + * Build the static library with -fPIC. This isn't ideal, but unless it's + safe to build a shared library now, this is the only immediate way to + fix this bug. (Closes: #196719) + + -- Daniel Burrows Sun, 5 Oct 2003 11:21:58 -0400 + +tse3 (0.2.5-1) unstable; urgency=low + + * QA upload. + * New upstream release: + - Upstream has changed the ABI, but doesn't use a soname yet; build + only static library for now. (We could set $(libtse3_la_LDFLAGS) to + `-release $(VERSION)', but that'd be a PITA for the FTP masters.) + - Compiles with g++ 3.2. Closes: #180077. + * Package is orphaned (#174124); set maintainer to Debian QA Group. + * Add libasound2-dev to build dependencies. + * Leave aRts support disabled as kdemultimedia-dev seems to be broken + right now. + * Switch to debhelper 4. + * debian/rules: Automatically update config.{guess,sub} from + autotools-dev. Closes: #134738. + * debian/copyright: List upstream URL. + * Conforms to Standards version 3.5.8. + + -- Matej Vela Mon, 10 Feb 2003 23:54:41 +0100 + +tse3 (0.1.2-3) unstable; urgency=low + + * Additional 64-bit fix, thanks to Petter Reinhold (Closes: #130154) + + -- Brian Russo Thu, 7 Feb 2002 04:24:52 -1000 + +tse3 (0.1.2-2) unstable; urgency=low + + * Thanks elmo, fixed XML.cpp (Closes: #129531) (hppa fix) + + -- Brian Russo Wed, 16 Jan 2002 06:40:49 -1000 + +tse3 (0.1.2-1) unstable; urgency=low + + * New version (Closes: #126881) + * DEBHELPER 2 -> 3 + + -- Brian Russo Sat, 12 Jan 2002 22:54:42 -1000 + +tse3 (0.1.1-0) unstable; urgency=low + + * Fixed description (Closes: #117520) + * New version (Closes: #117874, #116198) + * Added API documentation + + -- Brian Russo Wed, 21 Nov 2001 01:13:36 -1000 + +tse3 (0.0.25-1.1) unstable; urgency=low + + * Non-maintainer upload. + * Fix debian/rules to work with dpkg-buildpackage -{b,B}, Closes: #103486. + + -- James Troup Wed, 17 Oct 2001 14:37:40 +0100 + +tse3 (0.0.25-1) unstable; urgency=low + + * Initial Release. + + -- Brian Russo Sat, 30 Jun 2001 01:10:54 +1100 --- tse3-0.2.7.orig/debian/compat +++ tse3-0.2.7/debian/compat @@ -0,0 +1 @@ +4 --- tse3-0.2.7.orig/debian/control +++ tse3-0.2.7/debian/control @@ -0,0 +1,56 @@ +Source: tse3 +Section: sound +Priority: optional +Maintainer: Daniel Burrows +Build-Depends: debhelper (>= 4), autotools-dev, libasound2-dev +Standards-Version: 3.6.1.0 + +Package: libtse3-0.2.7 +Section: libs +Architecture: any +Depends: ${shlibs:Depends} +Description: TSE3: portable sequencer engine in C++ - development files + TSE3 is a portable open source 'sequencer engine' written in C++. + It provides programmers with rich and powerful sequencing capabilities. + It is a 'sequencer engine' because it provides the actual driving force + elements of a sequencer but provides no form of interface. + . + TSE3 is a mature library based on a lot of experience. Versions of + TSE have been in use for a number of years. Whilst not providing the + user interface it provides a lot of assistance to a UI, attempting to + provide as much functionality as possible in as generic a manner as possible. + . + This package provides the shared library libtse3, needed to run packages + linked against tse3. + + +Package: libtse3-dev +Section: libdevel +Architecture: any +Depends: libc6-dev, libtse3-0.2.7 +Description: TSE3: portable sequencer engine in C++ - development files + TSE3 is a portable open source 'sequencer engine' written in C++. + It provides programmers with rich and powerful sequencing capabilities. + It is a 'sequencer engine' because it provides the actual driving force + elements of a sequencer but provides no form of interface. + . + TSE3 is a mature library based on a lot of experience. Versions of + TSE have been in use for a number of years. Whilst not providing the + user interface it provides a lot of assistance to a UI, attempting to + provide as much functionality as possible in as generic a manner as possible. + . + This package provides headers and static libraries, that will only be + needed to compile something that uses tse3. It is unnecessary for using + an application linked against the library. + +Package: tse3play +Architecture: any +Depends: ${shlibs:Depends} +Description: MIDI/TSE3MDL player/converter + tse3play plays TSE3MDL files and MIDI files using the TSE3 sequencer + engine. It was originally developed as a test application + for the TSE3 engine, but is now a fully featured playback application. + . + It can convert files between the two supported formats. Whilst playing + it provides text-based visual feedback or can stream an English representation + of the contents of the file to standard output. --- tse3-0.2.7.orig/debian/copyright +++ tse3-0.2.7/debian/copyright @@ -0,0 +1,10 @@ +TSE3 was packaged for Debian by Brian Russo + +It was downloaded from http://tse3.sourceforge.net/ + +X-TV-Watching: Carrie 2: The Rage + +Upstream author: Pete Goodliffe + +TSE3 Sequencer Library is licensed under the GNU General Public License. +It may be found on any Debian system in /usr/share/common-licenses/GPL --- tse3-0.2.7.orig/debian/tse3play.install +++ tse3-0.2.7/debian/tse3play.install @@ -0,0 +1,2 @@ +debian/tmp/usr/bin +debian/tmp/usr/man/man1 usr/share/man/man1 --- tse3-0.2.7.orig/debian/libtse3-0.2.7.install +++ tse3-0.2.7/debian/libtse3-0.2.7.install @@ -0,0 +1 @@ +debian/tmp/usr/lib/libtse3-0.2.7.so \ No newline at end of file --- tse3-0.2.7.orig/demos/Makefile.in +++ tse3-0.2.7/demos/Makefile.in @@ -1,8 +1,6 @@ -# Makefile.in generated by automake 1.6.3 from Makefile.am. -# @configure_input@ +# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am -# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 -# Free Software Foundation, Inc. +# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. @@ -12,10 +10,10 @@ # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. -@SET_MAKE@ - ############################################################################### # Install demo songs + + SHELL = @SHELL@ srcdir = @srcdir@ @@ -36,9 +34,13 @@ mandir = @mandir@ includedir = @includedir@ oldincludedir = /usr/include + +DESTDIR = + pkgdatadir = $(datadir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ + top_builddir = .. ACLOCAL = @ACLOCAL@ @@ -46,16 +48,12 @@ AUTOMAKE = @AUTOMAKE@ AUTOHEADER = @AUTOHEADER@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd INSTALL = @INSTALL@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS) INSTALL_DATA = @INSTALL_DATA@ -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_HEADER = $(INSTALL_DATA) transform = @program_transform_name@ + NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : @@ -64,29 +62,34 @@ POST_UNINSTALL = : host_alias = @host_alias@ host_triplet = @host@ - -EXEEXT = @EXEEXT@ -OBJEXT = @OBJEXT@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -AMTAR = @AMTAR@ +AR = @AR@ AS = @AS@ -AWK = @AWK@ CC = @CC@ CPP = @CPP@ CPP_MM = @CPP_MM@ CXX = @CXX@ -DEPDIR = @DEPDIR@ +CXXCPP = @CXXCPP@ DLLTOOL = @DLLTOOL@ ECHO = @ECHO@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +EGREP = @EGREP@ +EXEEXT = @EXEEXT@ +F77 = @F77@ +GCJ = @GCJ@ +GCJFLAGS = @GCJFLAGS@ +HAVE_LIB = @HAVE_LIB@ +LIB = @LIB@ LIBARTS = @LIBARTS@ LIBASOUND = @LIBASOUND@ LIBTOOL = @LIBTOOL@ LIBTOOL_DEPS = @LIBTOOL_DEPS@ LN_S = @LN_S@ +LTLIB = @LTLIB@ +MAKEINFO = @MAKEINFO@ OBJDUMP = @OBJDUMP@ +OBJEXT = @OBJEXT@ PACKAGE = @PACKAGE@ RANLIB = @RANLIB@ +RC = @RC@ STRIP = @STRIP@ TSE3_ALSA_PREFIX = @TSE3_ALSA_PREFIX@ TSE3_ALSA_VERSION = @TSE3_ALSA_VERSION@ @@ -98,177 +101,139 @@ TSE3_WITH_OSS = @TSE3_WITH_OSS@ TSE3_WITH_WIN32 = @TSE3_WITH_WIN32@ VERSION = @VERSION@ -am__include = @am__include@ -am__quote = @am__quote@ -install_sh = @install_sh@ - -SONG_FILES = \ - Ambient.tse3 \ - Bry.tse3 \ - Demo.tse3 \ - Enigma.tse3 \ - FunkyJob.tse3 \ - Humphry.tse3 \ - Trip.tse3 \ - Demo.tse2 + +SONG_FILES = Ambient.tse3 Bry.tse3 Demo.tse3 Enigma.tse3 FunkyJob.tse3 Humphry.tse3 Trip.tse3 Demo.tse2 @INSTALL_TSE3_DOC_TRUE@docs_DATA = $(SONG_FILES) @INSTALL_TSE3_DOC_TRUE@docsdir = ${prefix}/doc/${PACKAGE}-${VERSION}/songs - - -############################################################################### -# Distribute them EXTRA_DIST = test.mid Standard.ins $(SONG_FILES) -subdir = demos mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = -DIST_SOURCES = -DATA = $(docs_DATA) +CONFIG_HEADER = ../config.h +CONFIG_CLEAN_FILES = +DATA = $(docs_DATA) + +DIST_COMMON = Makefile.am Makefile.in + -DIST_COMMON = Makefile.am Makefile.in -all: all-am +DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) +TAR = tar +GZIP_ENV = --best +all: all-redirect .SUFFIXES: -$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) - cd $(top_srcdir) && \ - $(AUTOMAKE) --gnu demos/Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe) +$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) + cd $(top_srcdir) && $(AUTOMAKE) --gnu demos/Makefile -mostlyclean-libtool: - -rm -f *.lo +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES) + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status -clean-libtool: - -rm -rf .libs _libs -distclean-libtool: - -rm -f libtool -uninstall-info-am: -docsDATA_INSTALL = $(INSTALL_DATA) install-docsDATA: $(docs_DATA) @$(NORMAL_INSTALL) $(mkinstalldirs) $(DESTDIR)$(docsdir) @list='$(docs_DATA)'; for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - f="`echo $$p | sed -e 's|^.*/||'`"; \ - echo " $(docsDATA_INSTALL) $$d$$p $(DESTDIR)$(docsdir)/$$f"; \ - $(docsDATA_INSTALL) $$d$$p $(DESTDIR)$(docsdir)/$$f; \ + if test -f $(srcdir)/$$p; then \ + echo " $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(docsdir)/$$p"; \ + $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(docsdir)/$$p; \ + else if test -f $$p; then \ + echo " $(INSTALL_DATA) $$p $(DESTDIR)$(docsdir)/$$p"; \ + $(INSTALL_DATA) $$p $(DESTDIR)$(docsdir)/$$p; \ + fi; fi; \ done uninstall-docsDATA: @$(NORMAL_UNINSTALL) - @list='$(docs_DATA)'; for p in $$list; do \ - f="`echo $$p | sed -e 's|^.*/||'`"; \ - echo " rm -f $(DESTDIR)$(docsdir)/$$f"; \ - rm -f $(DESTDIR)$(docsdir)/$$f; \ + list='$(docs_DATA)'; for p in $$list; do \ + rm -f $(DESTDIR)$(docsdir)/$$p; \ done tags: TAGS TAGS: -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -top_distdir = .. -distdir = $(top_distdir)/$(PACKAGE)-$(VERSION) +distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir) + +subdir = demos distdir: $(DISTFILES) - @list='$(DISTFILES)'; for file in $$list; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test "$$dir" != "$$file" && test "$$dir" != "."; then \ - dir="/$$dir"; \ - $(mkinstalldirs) "$(distdir)$$dir"; \ - else \ - dir=''; \ - fi; \ + here=`cd $(top_builddir) && pwd`; \ + top_distdir=`cd $(top_distdir) && pwd`; \ + distdir=`cd $(distdir) && pwd`; \ + cd $(top_srcdir) \ + && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu demos/Makefile + @for file in $(DISTFILES); do \ + d=$(srcdir); \ if test -d $$d/$$file; then \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ - fi; \ - cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + cp -pr $$d/$$file $(distdir)/$$file; \ else \ test -f $(distdir)/$$file \ - || cp -p $$d/$$file $(distdir)/$$file \ - || exit 1; \ + || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ + || cp -p $$d/$$file $(distdir)/$$file || :; \ fi; \ done +info-am: +info: info-am +dvi-am: +dvi: dvi-am check-am: all-am check: check-am -all-am: Makefile $(DATA) - -installdirs: - $(mkinstalldirs) $(DESTDIR)$(docsdir) - -install: install-am +installcheck-am: +installcheck: installcheck-am +install-exec-am: install-exec: install-exec-am + +install-data-am: install-docsDATA install-data: install-data-am -uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am +install: install-am +uninstall-am: uninstall-docsDATA +uninstall: uninstall-am +all-am: Makefile $(DATA) +all-redirect: all-am install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install + $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install +installdirs: + $(mkinstalldirs) $(DESTDIR)$(docsdir) + + mostlyclean-generic: clean-generic: distclean-generic: -rm -f Makefile $(CONFIG_CLEAN_FILES) + -rm -f config.cache config.log stamp-h stamp-h[0-9]* maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-am - -clean-am: clean-generic clean-libtool mostlyclean-am +mostlyclean-am: mostlyclean-generic -distclean: distclean-am - -distclean-am: clean-am distclean-generic distclean-libtool - -dvi: dvi-am - -dvi-am: - -info: info-am - -info-am: +mostlyclean: mostlyclean-am -install-data-am: install-docsDATA +clean-am: clean-generic mostlyclean-am -install-exec-am: +clean: clean-am -install-info: install-info-am +distclean-am: distclean-generic clean-am + -rm -f libtool -install-man: +distclean: distclean-am -installcheck-am: +maintainer-clean-am: maintainer-clean-generic distclean-am + @echo "This command is intended for maintainers to use;" + @echo "it deletes files that may require special tools to rebuild." maintainer-clean: maintainer-clean-am -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-generic mostlyclean-libtool - -uninstall-am: uninstall-docsDATA uninstall-info-am +.PHONY: uninstall-docsDATA install-docsDATA tags distdir info-am info \ +dvi-am dvi check check-am installcheck-am installcheck install-exec-am \ +install-exec install-data-am install-data install-am install \ +uninstall-am uninstall all-redirect all-am all installdirs \ +mostlyclean-generic distclean-generic clean-generic \ +maintainer-clean-generic clean mostlyclean distclean maintainer-clean -.PHONY: all all-am check check-am clean clean-generic clean-libtool \ - distclean distclean-generic distclean-libtool distdir dvi \ - dvi-am info info-am install install-am install-data \ - install-data-am install-docsDATA install-exec install-exec-am \ - install-info install-info-am install-man install-strip \ - installcheck installcheck-am installdirs maintainer-clean \ - maintainer-clean-generic mostlyclean mostlyclean-generic \ - mostlyclean-libtool uninstall uninstall-am uninstall-docsDATA \ - uninstall-info-am # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. --- tse3-0.2.7.orig/doc/Makefile.in +++ tse3-0.2.7/doc/Makefile.in @@ -1,8 +1,6 @@ -# Makefile.in generated by automake 1.6.3 from Makefile.am. -# @configure_input@ +# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am -# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 -# Free Software Foundation, Inc. +# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. @@ -12,10 +10,10 @@ # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. -@SET_MAKE@ - ############################################################################### # These are the distribution files + + SHELL = @SHELL@ srcdir = @srcdir@ @@ -36,9 +34,13 @@ mandir = @mandir@ includedir = @includedir@ oldincludedir = /usr/include + +DESTDIR = + pkgdatadir = $(datadir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ + top_builddir = .. ACLOCAL = @ACLOCAL@ @@ -46,16 +48,12 @@ AUTOMAKE = @AUTOMAKE@ AUTOHEADER = @AUTOHEADER@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd INSTALL = @INSTALL@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS) INSTALL_DATA = @INSTALL_DATA@ -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_HEADER = $(INSTALL_DATA) transform = @program_transform_name@ + NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : @@ -64,29 +62,34 @@ POST_UNINSTALL = : host_alias = @host_alias@ host_triplet = @host@ - -EXEEXT = @EXEEXT@ -OBJEXT = @OBJEXT@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -AMTAR = @AMTAR@ +AR = @AR@ AS = @AS@ -AWK = @AWK@ CC = @CC@ CPP = @CPP@ CPP_MM = @CPP_MM@ CXX = @CXX@ -DEPDIR = @DEPDIR@ +CXXCPP = @CXXCPP@ DLLTOOL = @DLLTOOL@ ECHO = @ECHO@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +EGREP = @EGREP@ +EXEEXT = @EXEEXT@ +F77 = @F77@ +GCJ = @GCJ@ +GCJFLAGS = @GCJFLAGS@ +HAVE_LIB = @HAVE_LIB@ +LIB = @LIB@ LIBARTS = @LIBARTS@ LIBASOUND = @LIBASOUND@ LIBTOOL = @LIBTOOL@ LIBTOOL_DEPS = @LIBTOOL_DEPS@ LN_S = @LN_S@ +LTLIB = @LTLIB@ +MAKEINFO = @MAKEINFO@ OBJDUMP = @OBJDUMP@ +OBJEXT = @OBJEXT@ PACKAGE = @PACKAGE@ RANLIB = @RANLIB@ +RC = @RC@ STRIP = @STRIP@ TSE3_ALSA_PREFIX = @TSE3_ALSA_PREFIX@ TSE3_ALSA_VERSION = @TSE3_ALSA_VERSION@ @@ -97,247 +100,157 @@ TSE3_WITH_ARTS = @TSE3_WITH_ARTS@ TSE3_WITH_OSS = @TSE3_WITH_OSS@ TSE3_WITH_WIN32 = @TSE3_WITH_WIN32@ -VERSION = `cat $(VERSION_FILE)` -am__include = @am__include@ -am__quote = @am__quote@ -install_sh = @install_sh@ - -EXTRA_DIST = \ - History \ - src/About.html.in \ - src/Article.html.in \ - src/Build.html.in \ - src/Bugs.html.in \ - src/Commands.html.in \ - src/Copyright.html.in \ - src/Error.html.in \ - src/Examples.html.in \ - src/Feedback.html.in \ - src/HOWTO.html.in \ - src/History.html.in \ - src/InsFiles.html.in \ - src/KDOC.html.in \ - src/Mutex.html.in \ - src/Notifier.html.in \ - src/Playable.html.in \ - src/Porting.html.in \ - src/Psalm150.html.in \ - src/Song.html.in \ - src/Structure.html.in \ - src/TSE3MDL.html.in \ - src/Trax.html.in \ - src/Trouble.html.in \ - src/Whitepaper.html.in \ - src/Version.html.in \ - src/htmlize.pl \ - src/index.html.in \ - src/pete.jpeg.verbatim.in \ - src/trax.gif.verbatim.in \ - src/tse3.gif.verbatim.in \ - src/tse3logo.png.verbatim.in +EXTRA_DIST = History src/About.html.in src/Article.html.in src/Build.html.in src/Bugs.html.in src/Commands.html.in src/Copyright.html.in src/Error.html.in src/Examples.html.in src/Feedback.html.in src/HOWTO.html.in src/History.html.in src/InsFiles.html.in src/KDOC.html.in src/Mutex.html.in src/Notifier.html.in src/Playable.html.in src/Porting.html.in src/Psalm150.html.in src/Song.html.in src/Structure.html.in src/TSE3MDL.html.in src/Trax.html.in src/Trouble.html.in src/Whitepaper.html.in src/Version.html.in src/htmlize.pl src/index.html.in src/pete.jpeg.verbatim.in src/trax.gif.verbatim.in src/tse3.gif.verbatim.in src/tse3logo.png.verbatim.in ############################################################################### # These are the files that get built -HTML_FILES = \ - About.html \ - Article.html \ - Build.html \ - Bugs.html \ - Commands.html \ - Copyright.html \ - Error.html \ - Examples.html \ - Feedback.html \ - HOWTO.html \ - History.html \ - InsFiles.html \ - KDOC.html \ - Mutex.html \ - Notifier.html \ - Playable.html \ - Porting.html \ - Psalm150.html \ - Song.html \ - Structure.html \ - TSE3MDL.html \ - Trax.html \ - Trouble.html \ - Whitepaper.html \ - Version.html \ - index.html - - -VERBATIM_FILES = \ - History \ - pete.jpeg \ - trax.gif \ - tse3.gif \ - tse3logo.png +HTML_FILES = About.html Article.html Build.html Bugs.html Commands.html Copyright.html Error.html Examples.html Feedback.html HOWTO.html History.html InsFiles.html KDOC.html Mutex.html Notifier.html Playable.html Porting.html Psalm150.html Song.html Structure.html TSE3MDL.html Trax.html Trouble.html Whitepaper.html Version.html index.html + + +VERBATIM_FILES = History pete.jpeg trax.gif tse3.gif tse3logo.png ############################################################################### # This is how they get built + HTMLIZE = $(srcdir)/src/htmlize.pl VERSION_FILE = $(top_srcdir)/Version - +VERSION = `cat $(VERSION_FILE)` ############################################################################### # And this is how they are installed + @INSTALL_TSE3_DOC_TRUE@docs_DATA = $(HTML_FILES) $(VERBATIM_FILES) @INSTALL_TSE3_DOC_TRUE@docsdir = ${prefix}/doc/${PACKAGE}-${VERSION} -subdir = doc mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = -DIST_SOURCES = -DATA = $(docs_DATA) +CONFIG_HEADER = ../config.h +CONFIG_CLEAN_FILES = +DATA = $(docs_DATA) -DIST_COMMON = README Makefile.am Makefile.in -all: all-am +DIST_COMMON = README Makefile.am Makefile.in + +DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) + +TAR = tar +GZIP_ENV = --best +all: all-redirect .SUFFIXES: -$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) - cd $(top_srcdir) && \ - $(AUTOMAKE) --gnu doc/Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe) +$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) + cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile -mostlyclean-libtool: - -rm -f *.lo +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES) + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status -clean-libtool: - -rm -rf .libs _libs -distclean-libtool: - -rm -f libtool -uninstall-info-am: -docsDATA_INSTALL = $(INSTALL_DATA) install-docsDATA: $(docs_DATA) @$(NORMAL_INSTALL) $(mkinstalldirs) $(DESTDIR)$(docsdir) @list='$(docs_DATA)'; for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - f="`echo $$p | sed -e 's|^.*/||'`"; \ - echo " $(docsDATA_INSTALL) $$d$$p $(DESTDIR)$(docsdir)/$$f"; \ - $(docsDATA_INSTALL) $$d$$p $(DESTDIR)$(docsdir)/$$f; \ + if test -f $(srcdir)/$$p; then \ + echo " $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(docsdir)/$$p"; \ + $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(docsdir)/$$p; \ + else if test -f $$p; then \ + echo " $(INSTALL_DATA) $$p $(DESTDIR)$(docsdir)/$$p"; \ + $(INSTALL_DATA) $$p $(DESTDIR)$(docsdir)/$$p; \ + fi; fi; \ done uninstall-docsDATA: @$(NORMAL_UNINSTALL) - @list='$(docs_DATA)'; for p in $$list; do \ - f="`echo $$p | sed -e 's|^.*/||'`"; \ - echo " rm -f $(DESTDIR)$(docsdir)/$$f"; \ - rm -f $(DESTDIR)$(docsdir)/$$f; \ + list='$(docs_DATA)'; for p in $$list; do \ + rm -f $(DESTDIR)$(docsdir)/$$p; \ done tags: TAGS TAGS: -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -top_distdir = .. -distdir = $(top_distdir)/$(PACKAGE)-$(VERSION) +distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir) + +subdir = doc distdir: $(DISTFILES) + here=`cd $(top_builddir) && pwd`; \ + top_distdir=`cd $(top_distdir) && pwd`; \ + distdir=`cd $(distdir) && pwd`; \ + cd $(top_srcdir) \ + && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu doc/Makefile $(mkinstalldirs) $(distdir)/src - @list='$(DISTFILES)'; for file in $$list; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test "$$dir" != "$$file" && test "$$dir" != "."; then \ - dir="/$$dir"; \ - $(mkinstalldirs) "$(distdir)$$dir"; \ - else \ - dir=''; \ - fi; \ + @for file in $(DISTFILES); do \ + d=$(srcdir); \ if test -d $$d/$$file; then \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ - fi; \ - cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + cp -pr $$d/$$file $(distdir)/$$file; \ else \ test -f $(distdir)/$$file \ - || cp -p $$d/$$file $(distdir)/$$file \ - || exit 1; \ + || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ + || cp -p $$d/$$file $(distdir)/$$file || :; \ fi; \ done +info-am: +info: info-am +dvi-am: +dvi: dvi-am check-am: all-am check: check-am -all-am: Makefile $(DATA) all-local - -installdirs: - $(mkinstalldirs) $(DESTDIR)$(docsdir) - -install: install-am +installcheck-am: +installcheck: installcheck-am +install-exec-am: install-exec: install-exec-am + +install-data-am: install-docsDATA install-data: install-data-am -uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am +install: install-am +uninstall-am: uninstall-docsDATA +uninstall: uninstall-am +all-am: Makefile $(DATA) all-local +all-redirect: all-am install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install + $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install +installdirs: + $(mkinstalldirs) $(DESTDIR)$(docsdir) + + mostlyclean-generic: clean-generic: distclean-generic: -rm -f Makefile $(CONFIG_CLEAN_FILES) + -rm -f config.cache config.log stamp-h stamp-h[0-9]* maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-am - -clean-am: clean-generic clean-libtool clean-local mostlyclean-am - -distclean: distclean-am - -distclean-am: clean-am distclean-generic distclean-libtool - -dvi: dvi-am +mostlyclean-am: mostlyclean-generic -dvi-am: - -info: info-am - -info-am: +mostlyclean: mostlyclean-am -install-data-am: install-docsDATA +clean-am: clean-generic mostlyclean-am clean-local -install-exec-am: +clean: clean-am -install-info: install-info-am +distclean-am: distclean-generic clean-am + -rm -f libtool -install-man: +distclean: distclean-am -installcheck-am: +maintainer-clean-am: maintainer-clean-generic distclean-am + @echo "This command is intended for maintainers to use;" + @echo "it deletes files that may require special tools to rebuild." maintainer-clean: maintainer-clean-am -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-generic mostlyclean-libtool - -uninstall-am: uninstall-docsDATA uninstall-info-am - -.PHONY: all all-am all-local check check-am clean clean-generic \ - clean-libtool clean-local distclean distclean-generic \ - distclean-libtool distdir dvi dvi-am info info-am install \ - install-am install-data install-data-am install-docsDATA \ - install-exec install-exec-am install-info install-info-am \ - install-man install-strip installcheck installcheck-am \ - installdirs maintainer-clean maintainer-clean-generic \ - mostlyclean mostlyclean-generic mostlyclean-libtool uninstall \ - uninstall-am uninstall-docsDATA uninstall-info-am +.PHONY: uninstall-docsDATA install-docsDATA tags distdir info-am info \ +dvi-am dvi check check-am installcheck-am installcheck install-exec-am \ +install-exec install-data-am install-data install-am install \ +uninstall-am uninstall all-local all-redirect all-am all installdirs \ +mostlyclean-generic distclean-generic clean-generic \ +maintainer-clean-generic clean mostlyclean distclean maintainer-clean all-local: $(HTML_FILES) $(VERBATIM_FILES) $(HTMLIZE) $(VERSION_FILE) @@ -369,6 +282,7 @@ %.jpeg: src/%.jpeg.verbatim.in @echo "Creating $@ from $<" cp $< $@ + # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: --- tse3-0.2.7.orig/src/examples/contents/Makefile.in +++ tse3-0.2.7/src/examples/contents/Makefile.in @@ -1,8 +1,6 @@ -# Makefile.in generated by automake 1.6.3 from Makefile.am. -# @configure_input@ +# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am -# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 -# Free Software Foundation, Inc. +# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. @@ -12,7 +10,7 @@ # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. -@SET_MAKE@ + SHELL = @SHELL@ srcdir = @srcdir@ @@ -33,9 +31,13 @@ mandir = @mandir@ includedir = @includedir@ oldincludedir = /usr/include + +DESTDIR = + pkgdatadir = $(datadir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ + top_builddir = ../../.. ACLOCAL = @ACLOCAL@ @@ -43,16 +45,12 @@ AUTOMAKE = @AUTOMAKE@ AUTOHEADER = @AUTOHEADER@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd INSTALL = @INSTALL@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS) INSTALL_DATA = @INSTALL_DATA@ -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_HEADER = $(INSTALL_DATA) transform = @program_transform_name@ + NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : @@ -61,29 +59,34 @@ POST_UNINSTALL = : host_alias = @host_alias@ host_triplet = @host@ - -EXEEXT = @EXEEXT@ -OBJEXT = @OBJEXT@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -AMTAR = @AMTAR@ +AR = @AR@ AS = @AS@ -AWK = @AWK@ CC = @CC@ CPP = @CPP@ CPP_MM = @CPP_MM@ CXX = @CXX@ -DEPDIR = @DEPDIR@ +CXXCPP = @CXXCPP@ DLLTOOL = @DLLTOOL@ ECHO = @ECHO@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +EGREP = @EGREP@ +EXEEXT = @EXEEXT@ +F77 = @F77@ +GCJ = @GCJ@ +GCJFLAGS = @GCJFLAGS@ +HAVE_LIB = @HAVE_LIB@ +LIB = @LIB@ LIBARTS = @LIBARTS@ LIBASOUND = @LIBASOUND@ LIBTOOL = @LIBTOOL@ LIBTOOL_DEPS = @LIBTOOL_DEPS@ LN_S = @LN_S@ +LTLIB = @LTLIB@ +MAKEINFO = @MAKEINFO@ OBJDUMP = @OBJDUMP@ +OBJEXT = @OBJEXT@ PACKAGE = @PACKAGE@ RANLIB = @RANLIB@ +RC = @RC@ STRIP = @STRIP@ TSE3_ALSA_PREFIX = @TSE3_ALSA_PREFIX@ TSE3_ALSA_VERSION = @TSE3_ALSA_VERSION@ @@ -95,9 +98,7 @@ TSE3_WITH_OSS = @TSE3_WITH_OSS@ TSE3_WITH_WIN32 = @TSE3_WITH_WIN32@ VERSION = @VERSION@ -am__include = @am__include@ -am__quote = @am__quote@ -install_sh = @install_sh@ + noinst_PROGRAMS = contents contents_SOURCES = contents.cpp @@ -106,88 +107,83 @@ DISTCLEANFILES = ./.deps/* ./.deps/.P INCLUDES = -I$(top_srcdir)/src -subdir = src/examples/contents mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = -noinst_PROGRAMS = contents$(EXEEXT) -PROGRAMS = $(noinst_PROGRAMS) - -am_contents_OBJECTS = contents.$(OBJEXT) -contents_OBJECTS = $(am_contents_OBJECTS) -contents_DEPENDENCIES = $(top_builddir)/src/tse3/libtse3.la -contents_LDFLAGS = +CONFIG_HEADER = ../../../config.h +CONFIG_CLEAN_FILES = +noinst_PROGRAMS = contents$(EXEEXT) +PROGRAMS = $(noinst_PROGRAMS) + -DEFS = @DEFS@ -DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir) +DEFS = @DEFS@ -I. -I$(srcdir) -I../../.. CPPFLAGS = @CPPFLAGS@ LDFLAGS = @LDFLAGS@ LIBS = @LIBS@ -depcomp = $(SHELL) $(top_srcdir)/depcomp -am__depfiles_maybe = depfiles -@AMDEP_TRUE@DEP_FILES = ./$(DEPDIR)/contents.Po -CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ - $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -LTCXXCOMPILE = $(LIBTOOL) --mode=compile $(CXX) $(DEFS) \ - $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ - $(AM_CXXFLAGS) $(CXXFLAGS) -CXXLD = $(CXX) -CXXLINK = $(LIBTOOL) --mode=link $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) \ - $(AM_LDFLAGS) $(LDFLAGS) -o $@ +contents_OBJECTS = contents.$(OBJEXT) +contents_DEPENDENCIES = $(top_builddir)/src/tse3/libtse3.la +contents_LDFLAGS = CXXFLAGS = @CXXFLAGS@ -DIST_SOURCES = $(contents_SOURCES) -DIST_COMMON = Makefile.am Makefile.in -SOURCES = $(contents_SOURCES) +CXXCOMPILE = $(CXX) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) +LTCXXCOMPILE = $(LIBTOOL) --mode=compile $(CXX) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) +CXXLD = $(CXX) +CXXLINK = $(LIBTOOL) --mode=link $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) $(LDFLAGS) -o $@ +DIST_COMMON = Makefile.am Makefile.in -all: all-am +DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) + +TAR = tar +GZIP_ENV = --best +DEP_FILES = .deps/contents.P +SOURCES = $(contents_SOURCES) +OBJECTS = $(contents_OBJECTS) + +all: all-redirect .SUFFIXES: -.SUFFIXES: .cpp .lo .o .obj -$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) - cd $(top_srcdir) && \ - $(AUTOMAKE) --gnu src/examples/contents/Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe) +.SUFFIXES: .S .c .cpp .lo .o .obj .s +$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) + cd $(top_srcdir) && $(AUTOMAKE) --gnu src/examples/contents/Makefile + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES) + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status + + +mostlyclean-noinstPROGRAMS: clean-noinstPROGRAMS: - @list='$(noinst_PROGRAMS)'; for p in $$list; do \ - f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ - echo " rm -f $$p $$f"; \ - rm -f $$p $$f ; \ - done -contents$(EXEEXT): $(contents_OBJECTS) $(contents_DEPENDENCIES) - @rm -f contents$(EXEEXT) - $(CXXLINK) $(contents_LDFLAGS) $(contents_OBJECTS) $(contents_LDADD) $(LIBS) + -test -z "$(noinst_PROGRAMS)" || rm -f $(noinst_PROGRAMS) + +distclean-noinstPROGRAMS: + +maintainer-clean-noinstPROGRAMS: + +# FIXME: We should only use cygpath when building on Windows, +# and only if it is available. +.c.obj: + $(COMPILE) -c `cygpath -w $<` + +.s.o: + $(COMPILE) -c $< + +.S.o: + $(COMPILE) -c $< mostlyclean-compile: - -rm -f *.$(OBJEXT) core *.core + -rm -f *.o core *.core + -rm -f *.$(OBJEXT) + +clean-compile: distclean-compile: -rm -f *.tab.c -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/contents.Po@am__quote@ - -distclean-depend: - -rm -rf ./$(DEPDIR) - -.cpp.o: -@AMDEP_TRUE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@ -@AMDEP_TRUE@ $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - $(CXXCOMPILE) -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$< +maintainer-clean-compile: -.cpp.obj: -@AMDEP_TRUE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@ -@AMDEP_TRUE@ $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - $(CXXCOMPILE) -c -o $@ `cygpath -w $<` +.s.lo: + $(LIBTOOL) --mode=compile $(COMPILE) -c $< -.cpp.lo: -@AMDEP_TRUE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ -@AMDEP_TRUE@ depfile='$(DEPDIR)/$*.Plo' tmpdepfile='$(DEPDIR)/$*.TPlo' @AMDEPBACKSLASH@ -@AMDEP_TRUE@ $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - $(LTCXXCOMPILE) -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$< -CXXDEPMODE = @CXXDEPMODE@ +.S.lo: + $(LIBTOOL) --mode=compile $(COMPILE) -c $< mostlyclean-libtool: -rm -f *.lo @@ -196,150 +192,196 @@ -rm -rf .libs _libs distclean-libtool: - -rm -f libtool -uninstall-info-am: -ETAGS = etags -ETAGSFLAGS = +maintainer-clean-libtool: + +contents$(EXEEXT): $(contents_OBJECTS) $(contents_DEPENDENCIES) + @rm -f contents$(EXEEXT) + $(CXXLINK) $(contents_LDFLAGS) $(contents_OBJECTS) $(contents_LDADD) $(LIBS) +.cpp.o: + $(CXXCOMPILE) -c $< +.cpp.obj: + $(CXXCOMPILE) -c `cygpath -w $<` +.cpp.lo: + $(LTCXXCOMPILE) -c $< tags: TAGS -ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ +ID: $(HEADERS) $(SOURCES) $(LISP) + list='$(SOURCES) $(HEADERS)'; \ + unique=`for i in $$list; do echo $$i; done | \ + awk ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ - mkid -fID $$unique + here=`pwd` && cd $(srcdir) \ + && mkid -f$$here/ID $$unique $(LISP) -TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) +TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP) tags=; \ here=`pwd`; \ - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ + list='$(SOURCES) $(HEADERS)'; \ + unique=`for i in $$list; do echo $$i; done | \ + awk ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ - test -z "$(ETAGS_ARGS)$$tags$$unique" \ - || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$tags $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && cd $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) $$here + test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \ + || (cd $(srcdir) && etags -o $$here/TAGS $(ETAGS_ARGS) $$tags $$unique $(LISP)) + +mostlyclean-tags: + +clean-tags: distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) + -rm -f TAGS ID + +maintainer-clean-tags: -top_distdir = ../../.. -distdir = $(top_distdir)/$(PACKAGE)-$(VERSION) +distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir) + +subdir = src/examples/contents distdir: $(DISTFILES) - @list='$(DISTFILES)'; for file in $$list; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test "$$dir" != "$$file" && test "$$dir" != "."; then \ - dir="/$$dir"; \ - $(mkinstalldirs) "$(distdir)$$dir"; \ - else \ - dir=''; \ - fi; \ + here=`cd $(top_builddir) && pwd`; \ + top_distdir=`cd $(top_distdir) && pwd`; \ + distdir=`cd $(distdir) && pwd`; \ + cd $(top_srcdir) \ + && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu src/examples/contents/Makefile + @for file in $(DISTFILES); do \ + d=$(srcdir); \ if test -d $$d/$$file; then \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ - fi; \ - cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + cp -pr $$d/$$file $(distdir)/$$file; \ else \ test -f $(distdir)/$$file \ - || cp -p $$d/$$file $(distdir)/$$file \ - || exit 1; \ + || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ + || cp -p $$d/$$file $(distdir)/$$file || :; \ fi; \ done -check-am: all-am -check: check-am -all-am: Makefile $(PROGRAMS) -installdirs: +DEPS_MAGIC := $(shell mkdir .deps > /dev/null 2>&1 || :) -install: install-am +-include $(DEP_FILES) + +mostlyclean-depend: + +clean-depend: + +distclean-depend: + -rm -rf .deps + +maintainer-clean-depend: + +%.o: %.c + @echo '$(COMPILE) -c $<'; \ + $(COMPILE) -Wp,-MD,.deps/$(*F).pp -c $< + @-cp .deps/$(*F).pp .deps/$(*F).P; \ + tr ' ' '\012' < .deps/$(*F).pp \ + | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \ + >> .deps/$(*F).P; \ + rm .deps/$(*F).pp + +%.lo: %.c + @echo '$(LTCOMPILE) -c $<'; \ + $(LTCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $< + @-sed -e 's/^\([^:]*\)\.o[ ]*:/\1.lo \1.o :/' \ + < .deps/$(*F).pp > .deps/$(*F).P; \ + tr ' ' '\012' < .deps/$(*F).pp \ + | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \ + >> .deps/$(*F).P; \ + rm -f .deps/$(*F).pp + +%.o: %.cpp + @echo '$(CXXCOMPILE) -c $<'; \ + $(CXXCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $< + @-cp .deps/$(*F).pp .deps/$(*F).P; \ + tr ' ' '\012' < .deps/$(*F).pp \ + | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \ + >> .deps/$(*F).P; \ + rm .deps/$(*F).pp + +%.lo: %.cpp + @echo '$(LTCXXCOMPILE) -c $<'; \ + $(LTCXXCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $< + @-sed -e 's/^\([^:]*\)\.o[ ]*:/\1.lo \1.o :/' \ + < .deps/$(*F).pp > .deps/$(*F).P; \ + tr ' ' '\012' < .deps/$(*F).pp \ + | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \ + >> .deps/$(*F).P; \ + rm -f .deps/$(*F).pp +info-am: +info: info-am +dvi-am: +dvi: dvi-am +check-am: all-am +check: check-am +installcheck-am: +installcheck: installcheck-am +install-exec-am: install-exec: install-exec-am + +install-data-am: install-data: install-data-am -uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am +install: install-am +uninstall-am: +uninstall: uninstall-am +all-am: Makefile $(PROGRAMS) +all-redirect: all-am install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install + $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install +installdirs: + + mostlyclean-generic: clean-generic: distclean-generic: -rm -f Makefile $(CONFIG_CLEAN_FILES) + -rm -f config.cache config.log stamp-h stamp-h[0-9]* -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES) maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-am - -clean-am: clean-generic clean-libtool clean-noinstPROGRAMS \ - mostlyclean-am - -distclean: distclean-am - -distclean-am: clean-am distclean-compile distclean-depend \ - distclean-generic distclean-libtool distclean-tags - -dvi: dvi-am - -dvi-am: - -info: info-am +mostlyclean-am: mostlyclean-noinstPROGRAMS mostlyclean-compile \ + mostlyclean-libtool mostlyclean-tags mostlyclean-depend \ + mostlyclean-generic -info-am: +mostlyclean: mostlyclean-am -install-data-am: +clean-am: clean-noinstPROGRAMS clean-compile clean-libtool clean-tags \ + clean-depend clean-generic mostlyclean-am -install-exec-am: +clean: clean-am -install-info: install-info-am +distclean-am: distclean-noinstPROGRAMS distclean-compile \ + distclean-libtool distclean-tags distclean-depend \ + distclean-generic clean-am + -rm -f libtool -install-man: +distclean: distclean-am -installcheck-am: +maintainer-clean-am: maintainer-clean-noinstPROGRAMS \ + maintainer-clean-compile maintainer-clean-libtool \ + maintainer-clean-tags maintainer-clean-depend \ + maintainer-clean-generic distclean-am + @echo "This command is intended for maintainers to use;" + @echo "it deletes files that may require special tools to rebuild." maintainer-clean: maintainer-clean-am -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-compile mostlyclean-generic \ - mostlyclean-libtool - -uninstall-am: uninstall-info-am +.PHONY: mostlyclean-noinstPROGRAMS distclean-noinstPROGRAMS \ +clean-noinstPROGRAMS maintainer-clean-noinstPROGRAMS \ +mostlyclean-compile distclean-compile clean-compile \ +maintainer-clean-compile mostlyclean-libtool distclean-libtool \ +clean-libtool maintainer-clean-libtool tags mostlyclean-tags \ +distclean-tags clean-tags maintainer-clean-tags distdir \ +mostlyclean-depend distclean-depend clean-depend \ +maintainer-clean-depend info-am info dvi-am dvi check check-am \ +installcheck-am installcheck install-exec-am install-exec \ +install-data-am install-data install-am install uninstall-am uninstall \ +all-redirect all-am all installdirs mostlyclean-generic \ +distclean-generic clean-generic maintainer-clean-generic clean \ +mostlyclean distclean maintainer-clean -.PHONY: GTAGS all all-am check check-am clean clean-generic \ - clean-libtool clean-noinstPROGRAMS distclean distclean-compile \ - distclean-depend distclean-generic distclean-libtool \ - distclean-tags distdir dvi dvi-am info info-am install \ - install-am install-data install-data-am install-exec \ - install-exec-am install-info install-info-am install-man \ - install-strip installcheck installcheck-am installdirs \ - maintainer-clean maintainer-clean-generic mostlyclean \ - mostlyclean-compile mostlyclean-generic mostlyclean-libtool \ - tags uninstall uninstall-am uninstall-info-am # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. --- tse3-0.2.7.orig/src/examples/midifile/Makefile.in +++ tse3-0.2.7/src/examples/midifile/Makefile.in @@ -1,8 +1,6 @@ -# Makefile.in generated by automake 1.6.3 from Makefile.am. -# @configure_input@ +# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am -# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 -# Free Software Foundation, Inc. +# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. @@ -12,7 +10,7 @@ # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. -@SET_MAKE@ + SHELL = @SHELL@ srcdir = @srcdir@ @@ -33,9 +31,13 @@ mandir = @mandir@ includedir = @includedir@ oldincludedir = /usr/include + +DESTDIR = + pkgdatadir = $(datadir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ + top_builddir = ../../.. ACLOCAL = @ACLOCAL@ @@ -43,16 +45,12 @@ AUTOMAKE = @AUTOMAKE@ AUTOHEADER = @AUTOHEADER@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd INSTALL = @INSTALL@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS) INSTALL_DATA = @INSTALL_DATA@ -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_HEADER = $(INSTALL_DATA) transform = @program_transform_name@ + NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : @@ -61,29 +59,34 @@ POST_UNINSTALL = : host_alias = @host_alias@ host_triplet = @host@ - -EXEEXT = @EXEEXT@ -OBJEXT = @OBJEXT@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -AMTAR = @AMTAR@ +AR = @AR@ AS = @AS@ -AWK = @AWK@ CC = @CC@ CPP = @CPP@ CPP_MM = @CPP_MM@ CXX = @CXX@ -DEPDIR = @DEPDIR@ +CXXCPP = @CXXCPP@ DLLTOOL = @DLLTOOL@ ECHO = @ECHO@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +EGREP = @EGREP@ +EXEEXT = @EXEEXT@ +F77 = @F77@ +GCJ = @GCJ@ +GCJFLAGS = @GCJFLAGS@ +HAVE_LIB = @HAVE_LIB@ +LIB = @LIB@ LIBARTS = @LIBARTS@ LIBASOUND = @LIBASOUND@ LIBTOOL = @LIBTOOL@ LIBTOOL_DEPS = @LIBTOOL_DEPS@ LN_S = @LN_S@ +LTLIB = @LTLIB@ +MAKEINFO = @MAKEINFO@ OBJDUMP = @OBJDUMP@ +OBJEXT = @OBJEXT@ PACKAGE = @PACKAGE@ RANLIB = @RANLIB@ +RC = @RC@ STRIP = @STRIP@ TSE3_ALSA_PREFIX = @TSE3_ALSA_PREFIX@ TSE3_ALSA_VERSION = @TSE3_ALSA_VERSION@ @@ -95,9 +98,7 @@ TSE3_WITH_OSS = @TSE3_WITH_OSS@ TSE3_WITH_WIN32 = @TSE3_WITH_WIN32@ VERSION = @VERSION@ -am__include = @am__include@ -am__quote = @am__quote@ -install_sh = @install_sh@ + noinst_PROGRAMS = midifile midifile_SOURCES = midifile.cpp @@ -106,88 +107,83 @@ DISTCLEANFILES = ./.deps/* ./.deps/.P INCLUDES = -I$(top_srcdir)/src -subdir = src/examples/midifile mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = -noinst_PROGRAMS = midifile$(EXEEXT) -PROGRAMS = $(noinst_PROGRAMS) - -am_midifile_OBJECTS = midifile.$(OBJEXT) -midifile_OBJECTS = $(am_midifile_OBJECTS) -midifile_DEPENDENCIES = $(top_builddir)/src/tse3/libtse3.la -midifile_LDFLAGS = +CONFIG_HEADER = ../../../config.h +CONFIG_CLEAN_FILES = +noinst_PROGRAMS = midifile$(EXEEXT) +PROGRAMS = $(noinst_PROGRAMS) + -DEFS = @DEFS@ -DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir) +DEFS = @DEFS@ -I. -I$(srcdir) -I../../.. CPPFLAGS = @CPPFLAGS@ LDFLAGS = @LDFLAGS@ LIBS = @LIBS@ -depcomp = $(SHELL) $(top_srcdir)/depcomp -am__depfiles_maybe = depfiles -@AMDEP_TRUE@DEP_FILES = ./$(DEPDIR)/midifile.Po -CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ - $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -LTCXXCOMPILE = $(LIBTOOL) --mode=compile $(CXX) $(DEFS) \ - $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ - $(AM_CXXFLAGS) $(CXXFLAGS) -CXXLD = $(CXX) -CXXLINK = $(LIBTOOL) --mode=link $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) \ - $(AM_LDFLAGS) $(LDFLAGS) -o $@ +midifile_OBJECTS = midifile.$(OBJEXT) +midifile_DEPENDENCIES = $(top_builddir)/src/tse3/libtse3.la +midifile_LDFLAGS = CXXFLAGS = @CXXFLAGS@ -DIST_SOURCES = $(midifile_SOURCES) -DIST_COMMON = Makefile.am Makefile.in -SOURCES = $(midifile_SOURCES) +CXXCOMPILE = $(CXX) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) +LTCXXCOMPILE = $(LIBTOOL) --mode=compile $(CXX) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) +CXXLD = $(CXX) +CXXLINK = $(LIBTOOL) --mode=link $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) $(LDFLAGS) -o $@ +DIST_COMMON = Makefile.am Makefile.in -all: all-am +DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) + +TAR = tar +GZIP_ENV = --best +DEP_FILES = .deps/midifile.P +SOURCES = $(midifile_SOURCES) +OBJECTS = $(midifile_OBJECTS) + +all: all-redirect .SUFFIXES: -.SUFFIXES: .cpp .lo .o .obj -$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) - cd $(top_srcdir) && \ - $(AUTOMAKE) --gnu src/examples/midifile/Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe) +.SUFFIXES: .S .c .cpp .lo .o .obj .s +$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) + cd $(top_srcdir) && $(AUTOMAKE) --gnu src/examples/midifile/Makefile + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES) + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status + + +mostlyclean-noinstPROGRAMS: clean-noinstPROGRAMS: - @list='$(noinst_PROGRAMS)'; for p in $$list; do \ - f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ - echo " rm -f $$p $$f"; \ - rm -f $$p $$f ; \ - done -midifile$(EXEEXT): $(midifile_OBJECTS) $(midifile_DEPENDENCIES) - @rm -f midifile$(EXEEXT) - $(CXXLINK) $(midifile_LDFLAGS) $(midifile_OBJECTS) $(midifile_LDADD) $(LIBS) + -test -z "$(noinst_PROGRAMS)" || rm -f $(noinst_PROGRAMS) + +distclean-noinstPROGRAMS: + +maintainer-clean-noinstPROGRAMS: + +# FIXME: We should only use cygpath when building on Windows, +# and only if it is available. +.c.obj: + $(COMPILE) -c `cygpath -w $<` + +.s.o: + $(COMPILE) -c $< + +.S.o: + $(COMPILE) -c $< mostlyclean-compile: - -rm -f *.$(OBJEXT) core *.core + -rm -f *.o core *.core + -rm -f *.$(OBJEXT) + +clean-compile: distclean-compile: -rm -f *.tab.c -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/midifile.Po@am__quote@ - -distclean-depend: - -rm -rf ./$(DEPDIR) - -.cpp.o: -@AMDEP_TRUE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@ -@AMDEP_TRUE@ $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - $(CXXCOMPILE) -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$< +maintainer-clean-compile: -.cpp.obj: -@AMDEP_TRUE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@ -@AMDEP_TRUE@ $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - $(CXXCOMPILE) -c -o $@ `cygpath -w $<` +.s.lo: + $(LIBTOOL) --mode=compile $(COMPILE) -c $< -.cpp.lo: -@AMDEP_TRUE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ -@AMDEP_TRUE@ depfile='$(DEPDIR)/$*.Plo' tmpdepfile='$(DEPDIR)/$*.TPlo' @AMDEPBACKSLASH@ -@AMDEP_TRUE@ $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - $(LTCXXCOMPILE) -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$< -CXXDEPMODE = @CXXDEPMODE@ +.S.lo: + $(LIBTOOL) --mode=compile $(COMPILE) -c $< mostlyclean-libtool: -rm -f *.lo @@ -196,150 +192,196 @@ -rm -rf .libs _libs distclean-libtool: - -rm -f libtool -uninstall-info-am: -ETAGS = etags -ETAGSFLAGS = +maintainer-clean-libtool: + +midifile$(EXEEXT): $(midifile_OBJECTS) $(midifile_DEPENDENCIES) + @rm -f midifile$(EXEEXT) + $(CXXLINK) $(midifile_LDFLAGS) $(midifile_OBJECTS) $(midifile_LDADD) $(LIBS) +.cpp.o: + $(CXXCOMPILE) -c $< +.cpp.obj: + $(CXXCOMPILE) -c `cygpath -w $<` +.cpp.lo: + $(LTCXXCOMPILE) -c $< tags: TAGS -ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ +ID: $(HEADERS) $(SOURCES) $(LISP) + list='$(SOURCES) $(HEADERS)'; \ + unique=`for i in $$list; do echo $$i; done | \ + awk ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ - mkid -fID $$unique + here=`pwd` && cd $(srcdir) \ + && mkid -f$$here/ID $$unique $(LISP) -TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) +TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP) tags=; \ here=`pwd`; \ - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ + list='$(SOURCES) $(HEADERS)'; \ + unique=`for i in $$list; do echo $$i; done | \ + awk ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ - test -z "$(ETAGS_ARGS)$$tags$$unique" \ - || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$tags $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && cd $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) $$here + test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \ + || (cd $(srcdir) && etags -o $$here/TAGS $(ETAGS_ARGS) $$tags $$unique $(LISP)) + +mostlyclean-tags: + +clean-tags: distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) + -rm -f TAGS ID + +maintainer-clean-tags: -top_distdir = ../../.. -distdir = $(top_distdir)/$(PACKAGE)-$(VERSION) +distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir) + +subdir = src/examples/midifile distdir: $(DISTFILES) - @list='$(DISTFILES)'; for file in $$list; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test "$$dir" != "$$file" && test "$$dir" != "."; then \ - dir="/$$dir"; \ - $(mkinstalldirs) "$(distdir)$$dir"; \ - else \ - dir=''; \ - fi; \ + here=`cd $(top_builddir) && pwd`; \ + top_distdir=`cd $(top_distdir) && pwd`; \ + distdir=`cd $(distdir) && pwd`; \ + cd $(top_srcdir) \ + && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu src/examples/midifile/Makefile + @for file in $(DISTFILES); do \ + d=$(srcdir); \ if test -d $$d/$$file; then \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ - fi; \ - cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + cp -pr $$d/$$file $(distdir)/$$file; \ else \ test -f $(distdir)/$$file \ - || cp -p $$d/$$file $(distdir)/$$file \ - || exit 1; \ + || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ + || cp -p $$d/$$file $(distdir)/$$file || :; \ fi; \ done -check-am: all-am -check: check-am -all-am: Makefile $(PROGRAMS) -installdirs: +DEPS_MAGIC := $(shell mkdir .deps > /dev/null 2>&1 || :) -install: install-am +-include $(DEP_FILES) + +mostlyclean-depend: + +clean-depend: + +distclean-depend: + -rm -rf .deps + +maintainer-clean-depend: + +%.o: %.c + @echo '$(COMPILE) -c $<'; \ + $(COMPILE) -Wp,-MD,.deps/$(*F).pp -c $< + @-cp .deps/$(*F).pp .deps/$(*F).P; \ + tr ' ' '\012' < .deps/$(*F).pp \ + | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \ + >> .deps/$(*F).P; \ + rm .deps/$(*F).pp + +%.lo: %.c + @echo '$(LTCOMPILE) -c $<'; \ + $(LTCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $< + @-sed -e 's/^\([^:]*\)\.o[ ]*:/\1.lo \1.o :/' \ + < .deps/$(*F).pp > .deps/$(*F).P; \ + tr ' ' '\012' < .deps/$(*F).pp \ + | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \ + >> .deps/$(*F).P; \ + rm -f .deps/$(*F).pp + +%.o: %.cpp + @echo '$(CXXCOMPILE) -c $<'; \ + $(CXXCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $< + @-cp .deps/$(*F).pp .deps/$(*F).P; \ + tr ' ' '\012' < .deps/$(*F).pp \ + | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \ + >> .deps/$(*F).P; \ + rm .deps/$(*F).pp + +%.lo: %.cpp + @echo '$(LTCXXCOMPILE) -c $<'; \ + $(LTCXXCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $< + @-sed -e 's/^\([^:]*\)\.o[ ]*:/\1.lo \1.o :/' \ + < .deps/$(*F).pp > .deps/$(*F).P; \ + tr ' ' '\012' < .deps/$(*F).pp \ + | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \ + >> .deps/$(*F).P; \ + rm -f .deps/$(*F).pp +info-am: +info: info-am +dvi-am: +dvi: dvi-am +check-am: all-am +check: check-am +installcheck-am: +installcheck: installcheck-am +install-exec-am: install-exec: install-exec-am + +install-data-am: install-data: install-data-am -uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am +install: install-am +uninstall-am: +uninstall: uninstall-am +all-am: Makefile $(PROGRAMS) +all-redirect: all-am install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install + $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install +installdirs: + + mostlyclean-generic: clean-generic: distclean-generic: -rm -f Makefile $(CONFIG_CLEAN_FILES) + -rm -f config.cache config.log stamp-h stamp-h[0-9]* -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES) maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-am - -clean-am: clean-generic clean-libtool clean-noinstPROGRAMS \ - mostlyclean-am - -distclean: distclean-am - -distclean-am: clean-am distclean-compile distclean-depend \ - distclean-generic distclean-libtool distclean-tags - -dvi: dvi-am - -dvi-am: - -info: info-am +mostlyclean-am: mostlyclean-noinstPROGRAMS mostlyclean-compile \ + mostlyclean-libtool mostlyclean-tags mostlyclean-depend \ + mostlyclean-generic -info-am: +mostlyclean: mostlyclean-am -install-data-am: +clean-am: clean-noinstPROGRAMS clean-compile clean-libtool clean-tags \ + clean-depend clean-generic mostlyclean-am -install-exec-am: +clean: clean-am -install-info: install-info-am +distclean-am: distclean-noinstPROGRAMS distclean-compile \ + distclean-libtool distclean-tags distclean-depend \ + distclean-generic clean-am + -rm -f libtool -install-man: +distclean: distclean-am -installcheck-am: +maintainer-clean-am: maintainer-clean-noinstPROGRAMS \ + maintainer-clean-compile maintainer-clean-libtool \ + maintainer-clean-tags maintainer-clean-depend \ + maintainer-clean-generic distclean-am + @echo "This command is intended for maintainers to use;" + @echo "it deletes files that may require special tools to rebuild." maintainer-clean: maintainer-clean-am -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-compile mostlyclean-generic \ - mostlyclean-libtool - -uninstall-am: uninstall-info-am +.PHONY: mostlyclean-noinstPROGRAMS distclean-noinstPROGRAMS \ +clean-noinstPROGRAMS maintainer-clean-noinstPROGRAMS \ +mostlyclean-compile distclean-compile clean-compile \ +maintainer-clean-compile mostlyclean-libtool distclean-libtool \ +clean-libtool maintainer-clean-libtool tags mostlyclean-tags \ +distclean-tags clean-tags maintainer-clean-tags distdir \ +mostlyclean-depend distclean-depend clean-depend \ +maintainer-clean-depend info-am info dvi-am dvi check check-am \ +installcheck-am installcheck install-exec-am install-exec \ +install-data-am install-data install-am install uninstall-am uninstall \ +all-redirect all-am all installdirs mostlyclean-generic \ +distclean-generic clean-generic maintainer-clean-generic clean \ +mostlyclean distclean maintainer-clean -.PHONY: GTAGS all all-am check check-am clean clean-generic \ - clean-libtool clean-noinstPROGRAMS distclean distclean-compile \ - distclean-depend distclean-generic distclean-libtool \ - distclean-tags distdir dvi dvi-am info info-am install \ - install-am install-data install-data-am install-exec \ - install-exec-am install-info install-info-am install-man \ - install-strip installcheck installcheck-am installdirs \ - maintainer-clean maintainer-clean-generic mostlyclean \ - mostlyclean-compile mostlyclean-generic mostlyclean-libtool \ - tags uninstall uninstall-am uninstall-info-am # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. --- tse3-0.2.7.orig/src/examples/ports/Makefile.in +++ tse3-0.2.7/src/examples/ports/Makefile.in @@ -1,8 +1,6 @@ -# Makefile.in generated by automake 1.6.3 from Makefile.am. -# @configure_input@ +# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am -# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 -# Free Software Foundation, Inc. +# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. @@ -12,7 +10,7 @@ # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. -@SET_MAKE@ + SHELL = @SHELL@ srcdir = @srcdir@ @@ -33,9 +31,13 @@ mandir = @mandir@ includedir = @includedir@ oldincludedir = /usr/include + +DESTDIR = + pkgdatadir = $(datadir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ + top_builddir = ../../.. ACLOCAL = @ACLOCAL@ @@ -43,16 +45,12 @@ AUTOMAKE = @AUTOMAKE@ AUTOHEADER = @AUTOHEADER@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd INSTALL = @INSTALL@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS) INSTALL_DATA = @INSTALL_DATA@ -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_HEADER = $(INSTALL_DATA) transform = @program_transform_name@ + NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : @@ -61,29 +59,34 @@ POST_UNINSTALL = : host_alias = @host_alias@ host_triplet = @host@ - -EXEEXT = @EXEEXT@ -OBJEXT = @OBJEXT@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -AMTAR = @AMTAR@ +AR = @AR@ AS = @AS@ -AWK = @AWK@ CC = @CC@ CPP = @CPP@ CPP_MM = @CPP_MM@ CXX = @CXX@ -DEPDIR = @DEPDIR@ +CXXCPP = @CXXCPP@ DLLTOOL = @DLLTOOL@ ECHO = @ECHO@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +EGREP = @EGREP@ +EXEEXT = @EXEEXT@ +F77 = @F77@ +GCJ = @GCJ@ +GCJFLAGS = @GCJFLAGS@ +HAVE_LIB = @HAVE_LIB@ +LIB = @LIB@ LIBARTS = @LIBARTS@ LIBASOUND = @LIBASOUND@ LIBTOOL = @LIBTOOL@ LIBTOOL_DEPS = @LIBTOOL_DEPS@ LN_S = @LN_S@ +LTLIB = @LTLIB@ +MAKEINFO = @MAKEINFO@ OBJDUMP = @OBJDUMP@ +OBJEXT = @OBJEXT@ PACKAGE = @PACKAGE@ RANLIB = @RANLIB@ +RC = @RC@ STRIP = @STRIP@ TSE3_ALSA_PREFIX = @TSE3_ALSA_PREFIX@ TSE3_ALSA_VERSION = @TSE3_ALSA_VERSION@ @@ -95,9 +98,7 @@ TSE3_WITH_OSS = @TSE3_WITH_OSS@ TSE3_WITH_WIN32 = @TSE3_WITH_WIN32@ VERSION = @VERSION@ -am__include = @am__include@ -am__quote = @am__quote@ -install_sh = @install_sh@ + noinst_PROGRAMS = ports ports_SOURCES = ports.cpp @@ -106,88 +107,83 @@ DISTCLEANFILES = ./.deps/* ./.deps/.P INCLUDES = -I$(top_srcdir)/src -subdir = src/examples/ports mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = -noinst_PROGRAMS = ports$(EXEEXT) -PROGRAMS = $(noinst_PROGRAMS) - -am_ports_OBJECTS = ports.$(OBJEXT) -ports_OBJECTS = $(am_ports_OBJECTS) -ports_DEPENDENCIES = $(top_builddir)/src/tse3/libtse3.la -ports_LDFLAGS = +CONFIG_HEADER = ../../../config.h +CONFIG_CLEAN_FILES = +noinst_PROGRAMS = ports$(EXEEXT) +PROGRAMS = $(noinst_PROGRAMS) + -DEFS = @DEFS@ -DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir) +DEFS = @DEFS@ -I. -I$(srcdir) -I../../.. CPPFLAGS = @CPPFLAGS@ LDFLAGS = @LDFLAGS@ LIBS = @LIBS@ -depcomp = $(SHELL) $(top_srcdir)/depcomp -am__depfiles_maybe = depfiles -@AMDEP_TRUE@DEP_FILES = ./$(DEPDIR)/ports.Po -CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ - $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -LTCXXCOMPILE = $(LIBTOOL) --mode=compile $(CXX) $(DEFS) \ - $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ - $(AM_CXXFLAGS) $(CXXFLAGS) -CXXLD = $(CXX) -CXXLINK = $(LIBTOOL) --mode=link $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) \ - $(AM_LDFLAGS) $(LDFLAGS) -o $@ +ports_OBJECTS = ports.$(OBJEXT) +ports_DEPENDENCIES = $(top_builddir)/src/tse3/libtse3.la +ports_LDFLAGS = CXXFLAGS = @CXXFLAGS@ -DIST_SOURCES = $(ports_SOURCES) -DIST_COMMON = Makefile.am Makefile.in -SOURCES = $(ports_SOURCES) +CXXCOMPILE = $(CXX) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) +LTCXXCOMPILE = $(LIBTOOL) --mode=compile $(CXX) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) +CXXLD = $(CXX) +CXXLINK = $(LIBTOOL) --mode=link $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) $(LDFLAGS) -o $@ +DIST_COMMON = Makefile.am Makefile.in -all: all-am +DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) + +TAR = tar +GZIP_ENV = --best +DEP_FILES = .deps/ports.P +SOURCES = $(ports_SOURCES) +OBJECTS = $(ports_OBJECTS) + +all: all-redirect .SUFFIXES: -.SUFFIXES: .cpp .lo .o .obj -$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) - cd $(top_srcdir) && \ - $(AUTOMAKE) --gnu src/examples/ports/Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe) +.SUFFIXES: .S .c .cpp .lo .o .obj .s +$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) + cd $(top_srcdir) && $(AUTOMAKE) --gnu src/examples/ports/Makefile + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES) + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status + + +mostlyclean-noinstPROGRAMS: clean-noinstPROGRAMS: - @list='$(noinst_PROGRAMS)'; for p in $$list; do \ - f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ - echo " rm -f $$p $$f"; \ - rm -f $$p $$f ; \ - done -ports$(EXEEXT): $(ports_OBJECTS) $(ports_DEPENDENCIES) - @rm -f ports$(EXEEXT) - $(CXXLINK) $(ports_LDFLAGS) $(ports_OBJECTS) $(ports_LDADD) $(LIBS) + -test -z "$(noinst_PROGRAMS)" || rm -f $(noinst_PROGRAMS) + +distclean-noinstPROGRAMS: + +maintainer-clean-noinstPROGRAMS: + +# FIXME: We should only use cygpath when building on Windows, +# and only if it is available. +.c.obj: + $(COMPILE) -c `cygpath -w $<` + +.s.o: + $(COMPILE) -c $< + +.S.o: + $(COMPILE) -c $< mostlyclean-compile: - -rm -f *.$(OBJEXT) core *.core + -rm -f *.o core *.core + -rm -f *.$(OBJEXT) + +clean-compile: distclean-compile: -rm -f *.tab.c -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ports.Po@am__quote@ - -distclean-depend: - -rm -rf ./$(DEPDIR) - -.cpp.o: -@AMDEP_TRUE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@ -@AMDEP_TRUE@ $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - $(CXXCOMPILE) -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$< +maintainer-clean-compile: -.cpp.obj: -@AMDEP_TRUE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@ -@AMDEP_TRUE@ $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - $(CXXCOMPILE) -c -o $@ `cygpath -w $<` +.s.lo: + $(LIBTOOL) --mode=compile $(COMPILE) -c $< -.cpp.lo: -@AMDEP_TRUE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ -@AMDEP_TRUE@ depfile='$(DEPDIR)/$*.Plo' tmpdepfile='$(DEPDIR)/$*.TPlo' @AMDEPBACKSLASH@ -@AMDEP_TRUE@ $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - $(LTCXXCOMPILE) -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$< -CXXDEPMODE = @CXXDEPMODE@ +.S.lo: + $(LIBTOOL) --mode=compile $(COMPILE) -c $< mostlyclean-libtool: -rm -f *.lo @@ -196,150 +192,196 @@ -rm -rf .libs _libs distclean-libtool: - -rm -f libtool -uninstall-info-am: -ETAGS = etags -ETAGSFLAGS = +maintainer-clean-libtool: + +ports$(EXEEXT): $(ports_OBJECTS) $(ports_DEPENDENCIES) + @rm -f ports$(EXEEXT) + $(CXXLINK) $(ports_LDFLAGS) $(ports_OBJECTS) $(ports_LDADD) $(LIBS) +.cpp.o: + $(CXXCOMPILE) -c $< +.cpp.obj: + $(CXXCOMPILE) -c `cygpath -w $<` +.cpp.lo: + $(LTCXXCOMPILE) -c $< tags: TAGS -ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ +ID: $(HEADERS) $(SOURCES) $(LISP) + list='$(SOURCES) $(HEADERS)'; \ + unique=`for i in $$list; do echo $$i; done | \ + awk ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ - mkid -fID $$unique + here=`pwd` && cd $(srcdir) \ + && mkid -f$$here/ID $$unique $(LISP) -TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) +TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP) tags=; \ here=`pwd`; \ - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ + list='$(SOURCES) $(HEADERS)'; \ + unique=`for i in $$list; do echo $$i; done | \ + awk ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ - test -z "$(ETAGS_ARGS)$$tags$$unique" \ - || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$tags $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && cd $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) $$here + test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \ + || (cd $(srcdir) && etags -o $$here/TAGS $(ETAGS_ARGS) $$tags $$unique $(LISP)) + +mostlyclean-tags: + +clean-tags: distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) + -rm -f TAGS ID + +maintainer-clean-tags: -top_distdir = ../../.. -distdir = $(top_distdir)/$(PACKAGE)-$(VERSION) +distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir) + +subdir = src/examples/ports distdir: $(DISTFILES) - @list='$(DISTFILES)'; for file in $$list; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test "$$dir" != "$$file" && test "$$dir" != "."; then \ - dir="/$$dir"; \ - $(mkinstalldirs) "$(distdir)$$dir"; \ - else \ - dir=''; \ - fi; \ + here=`cd $(top_builddir) && pwd`; \ + top_distdir=`cd $(top_distdir) && pwd`; \ + distdir=`cd $(distdir) && pwd`; \ + cd $(top_srcdir) \ + && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu src/examples/ports/Makefile + @for file in $(DISTFILES); do \ + d=$(srcdir); \ if test -d $$d/$$file; then \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ - fi; \ - cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + cp -pr $$d/$$file $(distdir)/$$file; \ else \ test -f $(distdir)/$$file \ - || cp -p $$d/$$file $(distdir)/$$file \ - || exit 1; \ + || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ + || cp -p $$d/$$file $(distdir)/$$file || :; \ fi; \ done -check-am: all-am -check: check-am -all-am: Makefile $(PROGRAMS) -installdirs: +DEPS_MAGIC := $(shell mkdir .deps > /dev/null 2>&1 || :) -install: install-am +-include $(DEP_FILES) + +mostlyclean-depend: + +clean-depend: + +distclean-depend: + -rm -rf .deps + +maintainer-clean-depend: + +%.o: %.c + @echo '$(COMPILE) -c $<'; \ + $(COMPILE) -Wp,-MD,.deps/$(*F).pp -c $< + @-cp .deps/$(*F).pp .deps/$(*F).P; \ + tr ' ' '\012' < .deps/$(*F).pp \ + | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \ + >> .deps/$(*F).P; \ + rm .deps/$(*F).pp + +%.lo: %.c + @echo '$(LTCOMPILE) -c $<'; \ + $(LTCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $< + @-sed -e 's/^\([^:]*\)\.o[ ]*:/\1.lo \1.o :/' \ + < .deps/$(*F).pp > .deps/$(*F).P; \ + tr ' ' '\012' < .deps/$(*F).pp \ + | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \ + >> .deps/$(*F).P; \ + rm -f .deps/$(*F).pp + +%.o: %.cpp + @echo '$(CXXCOMPILE) -c $<'; \ + $(CXXCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $< + @-cp .deps/$(*F).pp .deps/$(*F).P; \ + tr ' ' '\012' < .deps/$(*F).pp \ + | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \ + >> .deps/$(*F).P; \ + rm .deps/$(*F).pp + +%.lo: %.cpp + @echo '$(LTCXXCOMPILE) -c $<'; \ + $(LTCXXCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $< + @-sed -e 's/^\([^:]*\)\.o[ ]*:/\1.lo \1.o :/' \ + < .deps/$(*F).pp > .deps/$(*F).P; \ + tr ' ' '\012' < .deps/$(*F).pp \ + | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \ + >> .deps/$(*F).P; \ + rm -f .deps/$(*F).pp +info-am: +info: info-am +dvi-am: +dvi: dvi-am +check-am: all-am +check: check-am +installcheck-am: +installcheck: installcheck-am +install-exec-am: install-exec: install-exec-am + +install-data-am: install-data: install-data-am -uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am +install: install-am +uninstall-am: +uninstall: uninstall-am +all-am: Makefile $(PROGRAMS) +all-redirect: all-am install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install + $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install +installdirs: + + mostlyclean-generic: clean-generic: distclean-generic: -rm -f Makefile $(CONFIG_CLEAN_FILES) + -rm -f config.cache config.log stamp-h stamp-h[0-9]* -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES) maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-am - -clean-am: clean-generic clean-libtool clean-noinstPROGRAMS \ - mostlyclean-am - -distclean: distclean-am - -distclean-am: clean-am distclean-compile distclean-depend \ - distclean-generic distclean-libtool distclean-tags - -dvi: dvi-am - -dvi-am: - -info: info-am +mostlyclean-am: mostlyclean-noinstPROGRAMS mostlyclean-compile \ + mostlyclean-libtool mostlyclean-tags mostlyclean-depend \ + mostlyclean-generic -info-am: +mostlyclean: mostlyclean-am -install-data-am: +clean-am: clean-noinstPROGRAMS clean-compile clean-libtool clean-tags \ + clean-depend clean-generic mostlyclean-am -install-exec-am: +clean: clean-am -install-info: install-info-am +distclean-am: distclean-noinstPROGRAMS distclean-compile \ + distclean-libtool distclean-tags distclean-depend \ + distclean-generic clean-am + -rm -f libtool -install-man: +distclean: distclean-am -installcheck-am: +maintainer-clean-am: maintainer-clean-noinstPROGRAMS \ + maintainer-clean-compile maintainer-clean-libtool \ + maintainer-clean-tags maintainer-clean-depend \ + maintainer-clean-generic distclean-am + @echo "This command is intended for maintainers to use;" + @echo "it deletes files that may require special tools to rebuild." maintainer-clean: maintainer-clean-am -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-compile mostlyclean-generic \ - mostlyclean-libtool - -uninstall-am: uninstall-info-am +.PHONY: mostlyclean-noinstPROGRAMS distclean-noinstPROGRAMS \ +clean-noinstPROGRAMS maintainer-clean-noinstPROGRAMS \ +mostlyclean-compile distclean-compile clean-compile \ +maintainer-clean-compile mostlyclean-libtool distclean-libtool \ +clean-libtool maintainer-clean-libtool tags mostlyclean-tags \ +distclean-tags clean-tags maintainer-clean-tags distdir \ +mostlyclean-depend distclean-depend clean-depend \ +maintainer-clean-depend info-am info dvi-am dvi check check-am \ +installcheck-am installcheck install-exec-am install-exec \ +install-data-am install-data install-am install uninstall-am uninstall \ +all-redirect all-am all installdirs mostlyclean-generic \ +distclean-generic clean-generic maintainer-clean-generic clean \ +mostlyclean distclean maintainer-clean -.PHONY: GTAGS all all-am check check-am clean clean-generic \ - clean-libtool clean-noinstPROGRAMS distclean distclean-compile \ - distclean-depend distclean-generic distclean-libtool \ - distclean-tags distdir dvi dvi-am info info-am install \ - install-am install-data install-data-am install-exec \ - install-exec-am install-info install-info-am install-man \ - install-strip installcheck installcheck-am installdirs \ - maintainer-clean maintainer-clean-generic mostlyclean \ - mostlyclean-compile mostlyclean-generic mostlyclean-libtool \ - tags uninstall uninstall-am uninstall-info-am # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. --- tse3-0.2.7.orig/src/examples/recording/Makefile.in +++ tse3-0.2.7/src/examples/recording/Makefile.in @@ -1,8 +1,6 @@ -# Makefile.in generated by automake 1.6.3 from Makefile.am. -# @configure_input@ +# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am -# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 -# Free Software Foundation, Inc. +# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. @@ -12,7 +10,7 @@ # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. -@SET_MAKE@ + SHELL = @SHELL@ srcdir = @srcdir@ @@ -33,9 +31,13 @@ mandir = @mandir@ includedir = @includedir@ oldincludedir = /usr/include + +DESTDIR = + pkgdatadir = $(datadir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ + top_builddir = ../../.. ACLOCAL = @ACLOCAL@ @@ -43,16 +45,12 @@ AUTOMAKE = @AUTOMAKE@ AUTOHEADER = @AUTOHEADER@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd INSTALL = @INSTALL@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS) INSTALL_DATA = @INSTALL_DATA@ -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_HEADER = $(INSTALL_DATA) transform = @program_transform_name@ + NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : @@ -61,29 +59,34 @@ POST_UNINSTALL = : host_alias = @host_alias@ host_triplet = @host@ - -EXEEXT = @EXEEXT@ -OBJEXT = @OBJEXT@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -AMTAR = @AMTAR@ +AR = @AR@ AS = @AS@ -AWK = @AWK@ CC = @CC@ CPP = @CPP@ CPP_MM = @CPP_MM@ CXX = @CXX@ -DEPDIR = @DEPDIR@ +CXXCPP = @CXXCPP@ DLLTOOL = @DLLTOOL@ ECHO = @ECHO@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +EGREP = @EGREP@ +EXEEXT = @EXEEXT@ +F77 = @F77@ +GCJ = @GCJ@ +GCJFLAGS = @GCJFLAGS@ +HAVE_LIB = @HAVE_LIB@ +LIB = @LIB@ LIBARTS = @LIBARTS@ LIBASOUND = @LIBASOUND@ LIBTOOL = @LIBTOOL@ LIBTOOL_DEPS = @LIBTOOL_DEPS@ LN_S = @LN_S@ +LTLIB = @LTLIB@ +MAKEINFO = @MAKEINFO@ OBJDUMP = @OBJDUMP@ +OBJEXT = @OBJEXT@ PACKAGE = @PACKAGE@ RANLIB = @RANLIB@ +RC = @RC@ STRIP = @STRIP@ TSE3_ALSA_PREFIX = @TSE3_ALSA_PREFIX@ TSE3_ALSA_VERSION = @TSE3_ALSA_VERSION@ @@ -95,9 +98,7 @@ TSE3_WITH_OSS = @TSE3_WITH_OSS@ TSE3_WITH_WIN32 = @TSE3_WITH_WIN32@ VERSION = @VERSION@ -am__include = @am__include@ -am__quote = @am__quote@ -install_sh = @install_sh@ + noinst_PROGRAMS = recording recording_SOURCES = recording.cpp @@ -106,88 +107,83 @@ DISTCLEANFILES = ./.deps/* ./.deps/.P INCLUDES = -I$(top_srcdir)/src -subdir = src/examples/recording mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = -noinst_PROGRAMS = recording$(EXEEXT) -PROGRAMS = $(noinst_PROGRAMS) - -am_recording_OBJECTS = recording.$(OBJEXT) -recording_OBJECTS = $(am_recording_OBJECTS) -recording_DEPENDENCIES = $(top_builddir)/src/tse3/libtse3.la -recording_LDFLAGS = +CONFIG_HEADER = ../../../config.h +CONFIG_CLEAN_FILES = +noinst_PROGRAMS = recording$(EXEEXT) +PROGRAMS = $(noinst_PROGRAMS) + -DEFS = @DEFS@ -DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir) +DEFS = @DEFS@ -I. -I$(srcdir) -I../../.. CPPFLAGS = @CPPFLAGS@ LDFLAGS = @LDFLAGS@ LIBS = @LIBS@ -depcomp = $(SHELL) $(top_srcdir)/depcomp -am__depfiles_maybe = depfiles -@AMDEP_TRUE@DEP_FILES = ./$(DEPDIR)/recording.Po -CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ - $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -LTCXXCOMPILE = $(LIBTOOL) --mode=compile $(CXX) $(DEFS) \ - $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ - $(AM_CXXFLAGS) $(CXXFLAGS) -CXXLD = $(CXX) -CXXLINK = $(LIBTOOL) --mode=link $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) \ - $(AM_LDFLAGS) $(LDFLAGS) -o $@ +recording_OBJECTS = recording.$(OBJEXT) +recording_DEPENDENCIES = $(top_builddir)/src/tse3/libtse3.la +recording_LDFLAGS = CXXFLAGS = @CXXFLAGS@ -DIST_SOURCES = $(recording_SOURCES) -DIST_COMMON = Makefile.am Makefile.in -SOURCES = $(recording_SOURCES) +CXXCOMPILE = $(CXX) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) +LTCXXCOMPILE = $(LIBTOOL) --mode=compile $(CXX) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) +CXXLD = $(CXX) +CXXLINK = $(LIBTOOL) --mode=link $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) $(LDFLAGS) -o $@ +DIST_COMMON = Makefile.am Makefile.in -all: all-am +DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) + +TAR = tar +GZIP_ENV = --best +DEP_FILES = .deps/recording.P +SOURCES = $(recording_SOURCES) +OBJECTS = $(recording_OBJECTS) + +all: all-redirect .SUFFIXES: -.SUFFIXES: .cpp .lo .o .obj -$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) - cd $(top_srcdir) && \ - $(AUTOMAKE) --gnu src/examples/recording/Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe) +.SUFFIXES: .S .c .cpp .lo .o .obj .s +$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) + cd $(top_srcdir) && $(AUTOMAKE) --gnu src/examples/recording/Makefile + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES) + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status + + +mostlyclean-noinstPROGRAMS: clean-noinstPROGRAMS: - @list='$(noinst_PROGRAMS)'; for p in $$list; do \ - f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ - echo " rm -f $$p $$f"; \ - rm -f $$p $$f ; \ - done -recording$(EXEEXT): $(recording_OBJECTS) $(recording_DEPENDENCIES) - @rm -f recording$(EXEEXT) - $(CXXLINK) $(recording_LDFLAGS) $(recording_OBJECTS) $(recording_LDADD) $(LIBS) + -test -z "$(noinst_PROGRAMS)" || rm -f $(noinst_PROGRAMS) + +distclean-noinstPROGRAMS: + +maintainer-clean-noinstPROGRAMS: + +# FIXME: We should only use cygpath when building on Windows, +# and only if it is available. +.c.obj: + $(COMPILE) -c `cygpath -w $<` + +.s.o: + $(COMPILE) -c $< + +.S.o: + $(COMPILE) -c $< mostlyclean-compile: - -rm -f *.$(OBJEXT) core *.core + -rm -f *.o core *.core + -rm -f *.$(OBJEXT) + +clean-compile: distclean-compile: -rm -f *.tab.c -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/recording.Po@am__quote@ - -distclean-depend: - -rm -rf ./$(DEPDIR) - -.cpp.o: -@AMDEP_TRUE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@ -@AMDEP_TRUE@ $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - $(CXXCOMPILE) -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$< +maintainer-clean-compile: -.cpp.obj: -@AMDEP_TRUE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@ -@AMDEP_TRUE@ $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - $(CXXCOMPILE) -c -o $@ `cygpath -w $<` +.s.lo: + $(LIBTOOL) --mode=compile $(COMPILE) -c $< -.cpp.lo: -@AMDEP_TRUE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ -@AMDEP_TRUE@ depfile='$(DEPDIR)/$*.Plo' tmpdepfile='$(DEPDIR)/$*.TPlo' @AMDEPBACKSLASH@ -@AMDEP_TRUE@ $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - $(LTCXXCOMPILE) -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$< -CXXDEPMODE = @CXXDEPMODE@ +.S.lo: + $(LIBTOOL) --mode=compile $(COMPILE) -c $< mostlyclean-libtool: -rm -f *.lo @@ -196,150 +192,196 @@ -rm -rf .libs _libs distclean-libtool: - -rm -f libtool -uninstall-info-am: -ETAGS = etags -ETAGSFLAGS = +maintainer-clean-libtool: + +recording$(EXEEXT): $(recording_OBJECTS) $(recording_DEPENDENCIES) + @rm -f recording$(EXEEXT) + $(CXXLINK) $(recording_LDFLAGS) $(recording_OBJECTS) $(recording_LDADD) $(LIBS) +.cpp.o: + $(CXXCOMPILE) -c $< +.cpp.obj: + $(CXXCOMPILE) -c `cygpath -w $<` +.cpp.lo: + $(LTCXXCOMPILE) -c $< tags: TAGS -ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ +ID: $(HEADERS) $(SOURCES) $(LISP) + list='$(SOURCES) $(HEADERS)'; \ + unique=`for i in $$list; do echo $$i; done | \ + awk ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ - mkid -fID $$unique + here=`pwd` && cd $(srcdir) \ + && mkid -f$$here/ID $$unique $(LISP) -TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) +TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP) tags=; \ here=`pwd`; \ - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ + list='$(SOURCES) $(HEADERS)'; \ + unique=`for i in $$list; do echo $$i; done | \ + awk ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ - test -z "$(ETAGS_ARGS)$$tags$$unique" \ - || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$tags $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && cd $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) $$here + test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \ + || (cd $(srcdir) && etags -o $$here/TAGS $(ETAGS_ARGS) $$tags $$unique $(LISP)) + +mostlyclean-tags: + +clean-tags: distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) + -rm -f TAGS ID + +maintainer-clean-tags: -top_distdir = ../../.. -distdir = $(top_distdir)/$(PACKAGE)-$(VERSION) +distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir) + +subdir = src/examples/recording distdir: $(DISTFILES) - @list='$(DISTFILES)'; for file in $$list; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test "$$dir" != "$$file" && test "$$dir" != "."; then \ - dir="/$$dir"; \ - $(mkinstalldirs) "$(distdir)$$dir"; \ - else \ - dir=''; \ - fi; \ + here=`cd $(top_builddir) && pwd`; \ + top_distdir=`cd $(top_distdir) && pwd`; \ + distdir=`cd $(distdir) && pwd`; \ + cd $(top_srcdir) \ + && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu src/examples/recording/Makefile + @for file in $(DISTFILES); do \ + d=$(srcdir); \ if test -d $$d/$$file; then \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ - fi; \ - cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + cp -pr $$d/$$file $(distdir)/$$file; \ else \ test -f $(distdir)/$$file \ - || cp -p $$d/$$file $(distdir)/$$file \ - || exit 1; \ + || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ + || cp -p $$d/$$file $(distdir)/$$file || :; \ fi; \ done -check-am: all-am -check: check-am -all-am: Makefile $(PROGRAMS) -installdirs: +DEPS_MAGIC := $(shell mkdir .deps > /dev/null 2>&1 || :) -install: install-am +-include $(DEP_FILES) + +mostlyclean-depend: + +clean-depend: + +distclean-depend: + -rm -rf .deps + +maintainer-clean-depend: + +%.o: %.c + @echo '$(COMPILE) -c $<'; \ + $(COMPILE) -Wp,-MD,.deps/$(*F).pp -c $< + @-cp .deps/$(*F).pp .deps/$(*F).P; \ + tr ' ' '\012' < .deps/$(*F).pp \ + | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \ + >> .deps/$(*F).P; \ + rm .deps/$(*F).pp + +%.lo: %.c + @echo '$(LTCOMPILE) -c $<'; \ + $(LTCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $< + @-sed -e 's/^\([^:]*\)\.o[ ]*:/\1.lo \1.o :/' \ + < .deps/$(*F).pp > .deps/$(*F).P; \ + tr ' ' '\012' < .deps/$(*F).pp \ + | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \ + >> .deps/$(*F).P; \ + rm -f .deps/$(*F).pp + +%.o: %.cpp + @echo '$(CXXCOMPILE) -c $<'; \ + $(CXXCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $< + @-cp .deps/$(*F).pp .deps/$(*F).P; \ + tr ' ' '\012' < .deps/$(*F).pp \ + | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \ + >> .deps/$(*F).P; \ + rm .deps/$(*F).pp + +%.lo: %.cpp + @echo '$(LTCXXCOMPILE) -c $<'; \ + $(LTCXXCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $< + @-sed -e 's/^\([^:]*\)\.o[ ]*:/\1.lo \1.o :/' \ + < .deps/$(*F).pp > .deps/$(*F).P; \ + tr ' ' '\012' < .deps/$(*F).pp \ + | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \ + >> .deps/$(*F).P; \ + rm -f .deps/$(*F).pp +info-am: +info: info-am +dvi-am: +dvi: dvi-am +check-am: all-am +check: check-am +installcheck-am: +installcheck: installcheck-am +install-exec-am: install-exec: install-exec-am + +install-data-am: install-data: install-data-am -uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am +install: install-am +uninstall-am: +uninstall: uninstall-am +all-am: Makefile $(PROGRAMS) +all-redirect: all-am install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install + $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install +installdirs: + + mostlyclean-generic: clean-generic: distclean-generic: -rm -f Makefile $(CONFIG_CLEAN_FILES) + -rm -f config.cache config.log stamp-h stamp-h[0-9]* -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES) maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-am - -clean-am: clean-generic clean-libtool clean-noinstPROGRAMS \ - mostlyclean-am - -distclean: distclean-am - -distclean-am: clean-am distclean-compile distclean-depend \ - distclean-generic distclean-libtool distclean-tags - -dvi: dvi-am - -dvi-am: - -info: info-am +mostlyclean-am: mostlyclean-noinstPROGRAMS mostlyclean-compile \ + mostlyclean-libtool mostlyclean-tags mostlyclean-depend \ + mostlyclean-generic -info-am: +mostlyclean: mostlyclean-am -install-data-am: +clean-am: clean-noinstPROGRAMS clean-compile clean-libtool clean-tags \ + clean-depend clean-generic mostlyclean-am -install-exec-am: +clean: clean-am -install-info: install-info-am +distclean-am: distclean-noinstPROGRAMS distclean-compile \ + distclean-libtool distclean-tags distclean-depend \ + distclean-generic clean-am + -rm -f libtool -install-man: +distclean: distclean-am -installcheck-am: +maintainer-clean-am: maintainer-clean-noinstPROGRAMS \ + maintainer-clean-compile maintainer-clean-libtool \ + maintainer-clean-tags maintainer-clean-depend \ + maintainer-clean-generic distclean-am + @echo "This command is intended for maintainers to use;" + @echo "it deletes files that may require special tools to rebuild." maintainer-clean: maintainer-clean-am -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-compile mostlyclean-generic \ - mostlyclean-libtool - -uninstall-am: uninstall-info-am +.PHONY: mostlyclean-noinstPROGRAMS distclean-noinstPROGRAMS \ +clean-noinstPROGRAMS maintainer-clean-noinstPROGRAMS \ +mostlyclean-compile distclean-compile clean-compile \ +maintainer-clean-compile mostlyclean-libtool distclean-libtool \ +clean-libtool maintainer-clean-libtool tags mostlyclean-tags \ +distclean-tags clean-tags maintainer-clean-tags distdir \ +mostlyclean-depend distclean-depend clean-depend \ +maintainer-clean-depend info-am info dvi-am dvi check check-am \ +installcheck-am installcheck install-exec-am install-exec \ +install-data-am install-data install-am install uninstall-am uninstall \ +all-redirect all-am all installdirs mostlyclean-generic \ +distclean-generic clean-generic maintainer-clean-generic clean \ +mostlyclean distclean maintainer-clean -.PHONY: GTAGS all all-am check check-am clean clean-generic \ - clean-libtool clean-noinstPROGRAMS distclean distclean-compile \ - distclean-depend distclean-generic distclean-libtool \ - distclean-tags distdir dvi dvi-am info info-am install \ - install-am install-data install-data-am install-exec \ - install-exec-am install-info install-info-am install-man \ - install-strip installcheck installcheck-am installdirs \ - maintainer-clean maintainer-clean-generic mostlyclean \ - mostlyclean-compile mostlyclean-generic mostlyclean-libtool \ - tags uninstall uninstall-am uninstall-info-am # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. --- tse3-0.2.7.orig/src/examples/scale/Makefile.in +++ tse3-0.2.7/src/examples/scale/Makefile.in @@ -1,8 +1,6 @@ -# Makefile.in generated by automake 1.6.3 from Makefile.am. -# @configure_input@ +# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am -# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 -# Free Software Foundation, Inc. +# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. @@ -12,7 +10,7 @@ # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. -@SET_MAKE@ + SHELL = @SHELL@ srcdir = @srcdir@ @@ -33,9 +31,13 @@ mandir = @mandir@ includedir = @includedir@ oldincludedir = /usr/include + +DESTDIR = + pkgdatadir = $(datadir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ + top_builddir = ../../.. ACLOCAL = @ACLOCAL@ @@ -43,16 +45,12 @@ AUTOMAKE = @AUTOMAKE@ AUTOHEADER = @AUTOHEADER@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd INSTALL = @INSTALL@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS) INSTALL_DATA = @INSTALL_DATA@ -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_HEADER = $(INSTALL_DATA) transform = @program_transform_name@ + NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : @@ -61,29 +59,34 @@ POST_UNINSTALL = : host_alias = @host_alias@ host_triplet = @host@ - -EXEEXT = @EXEEXT@ -OBJEXT = @OBJEXT@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -AMTAR = @AMTAR@ +AR = @AR@ AS = @AS@ -AWK = @AWK@ CC = @CC@ CPP = @CPP@ CPP_MM = @CPP_MM@ CXX = @CXX@ -DEPDIR = @DEPDIR@ +CXXCPP = @CXXCPP@ DLLTOOL = @DLLTOOL@ ECHO = @ECHO@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +EGREP = @EGREP@ +EXEEXT = @EXEEXT@ +F77 = @F77@ +GCJ = @GCJ@ +GCJFLAGS = @GCJFLAGS@ +HAVE_LIB = @HAVE_LIB@ +LIB = @LIB@ LIBARTS = @LIBARTS@ LIBASOUND = @LIBASOUND@ LIBTOOL = @LIBTOOL@ LIBTOOL_DEPS = @LIBTOOL_DEPS@ LN_S = @LN_S@ +LTLIB = @LTLIB@ +MAKEINFO = @MAKEINFO@ OBJDUMP = @OBJDUMP@ +OBJEXT = @OBJEXT@ PACKAGE = @PACKAGE@ RANLIB = @RANLIB@ +RC = @RC@ STRIP = @STRIP@ TSE3_ALSA_PREFIX = @TSE3_ALSA_PREFIX@ TSE3_ALSA_VERSION = @TSE3_ALSA_VERSION@ @@ -95,9 +98,7 @@ TSE3_WITH_OSS = @TSE3_WITH_OSS@ TSE3_WITH_WIN32 = @TSE3_WITH_WIN32@ VERSION = @VERSION@ -am__include = @am__include@ -am__quote = @am__quote@ -install_sh = @install_sh@ + noinst_PROGRAMS = scale scale_SOURCES = scale.cpp @@ -106,88 +107,83 @@ DISTCLEANFILES = ./.deps/* ./.deps/.P INCLUDES = -I$(top_srcdir)/src -subdir = src/examples/scale mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = -noinst_PROGRAMS = scale$(EXEEXT) -PROGRAMS = $(noinst_PROGRAMS) - -am_scale_OBJECTS = scale.$(OBJEXT) -scale_OBJECTS = $(am_scale_OBJECTS) -scale_DEPENDENCIES = $(top_builddir)/src/tse3/libtse3.la -scale_LDFLAGS = +CONFIG_HEADER = ../../../config.h +CONFIG_CLEAN_FILES = +noinst_PROGRAMS = scale$(EXEEXT) +PROGRAMS = $(noinst_PROGRAMS) + -DEFS = @DEFS@ -DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir) +DEFS = @DEFS@ -I. -I$(srcdir) -I../../.. CPPFLAGS = @CPPFLAGS@ LDFLAGS = @LDFLAGS@ LIBS = @LIBS@ -depcomp = $(SHELL) $(top_srcdir)/depcomp -am__depfiles_maybe = depfiles -@AMDEP_TRUE@DEP_FILES = ./$(DEPDIR)/scale.Po -CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ - $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -LTCXXCOMPILE = $(LIBTOOL) --mode=compile $(CXX) $(DEFS) \ - $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ - $(AM_CXXFLAGS) $(CXXFLAGS) -CXXLD = $(CXX) -CXXLINK = $(LIBTOOL) --mode=link $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) \ - $(AM_LDFLAGS) $(LDFLAGS) -o $@ +scale_OBJECTS = scale.$(OBJEXT) +scale_DEPENDENCIES = $(top_builddir)/src/tse3/libtse3.la +scale_LDFLAGS = CXXFLAGS = @CXXFLAGS@ -DIST_SOURCES = $(scale_SOURCES) -DIST_COMMON = Makefile.am Makefile.in -SOURCES = $(scale_SOURCES) +CXXCOMPILE = $(CXX) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) +LTCXXCOMPILE = $(LIBTOOL) --mode=compile $(CXX) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) +CXXLD = $(CXX) +CXXLINK = $(LIBTOOL) --mode=link $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) $(LDFLAGS) -o $@ +DIST_COMMON = Makefile.am Makefile.in -all: all-am +DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) + +TAR = tar +GZIP_ENV = --best +DEP_FILES = .deps/scale.P +SOURCES = $(scale_SOURCES) +OBJECTS = $(scale_OBJECTS) + +all: all-redirect .SUFFIXES: -.SUFFIXES: .cpp .lo .o .obj -$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) - cd $(top_srcdir) && \ - $(AUTOMAKE) --gnu src/examples/scale/Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe) +.SUFFIXES: .S .c .cpp .lo .o .obj .s +$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) + cd $(top_srcdir) && $(AUTOMAKE) --gnu src/examples/scale/Makefile + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES) + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status + + +mostlyclean-noinstPROGRAMS: clean-noinstPROGRAMS: - @list='$(noinst_PROGRAMS)'; for p in $$list; do \ - f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ - echo " rm -f $$p $$f"; \ - rm -f $$p $$f ; \ - done -scale$(EXEEXT): $(scale_OBJECTS) $(scale_DEPENDENCIES) - @rm -f scale$(EXEEXT) - $(CXXLINK) $(scale_LDFLAGS) $(scale_OBJECTS) $(scale_LDADD) $(LIBS) + -test -z "$(noinst_PROGRAMS)" || rm -f $(noinst_PROGRAMS) + +distclean-noinstPROGRAMS: + +maintainer-clean-noinstPROGRAMS: + +# FIXME: We should only use cygpath when building on Windows, +# and only if it is available. +.c.obj: + $(COMPILE) -c `cygpath -w $<` + +.s.o: + $(COMPILE) -c $< + +.S.o: + $(COMPILE) -c $< mostlyclean-compile: - -rm -f *.$(OBJEXT) core *.core + -rm -f *.o core *.core + -rm -f *.$(OBJEXT) + +clean-compile: distclean-compile: -rm -f *.tab.c -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/scale.Po@am__quote@ - -distclean-depend: - -rm -rf ./$(DEPDIR) - -.cpp.o: -@AMDEP_TRUE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@ -@AMDEP_TRUE@ $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - $(CXXCOMPILE) -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$< +maintainer-clean-compile: -.cpp.obj: -@AMDEP_TRUE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@ -@AMDEP_TRUE@ $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - $(CXXCOMPILE) -c -o $@ `cygpath -w $<` +.s.lo: + $(LIBTOOL) --mode=compile $(COMPILE) -c $< -.cpp.lo: -@AMDEP_TRUE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ -@AMDEP_TRUE@ depfile='$(DEPDIR)/$*.Plo' tmpdepfile='$(DEPDIR)/$*.TPlo' @AMDEPBACKSLASH@ -@AMDEP_TRUE@ $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - $(LTCXXCOMPILE) -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$< -CXXDEPMODE = @CXXDEPMODE@ +.S.lo: + $(LIBTOOL) --mode=compile $(COMPILE) -c $< mostlyclean-libtool: -rm -f *.lo @@ -196,150 +192,196 @@ -rm -rf .libs _libs distclean-libtool: - -rm -f libtool -uninstall-info-am: -ETAGS = etags -ETAGSFLAGS = +maintainer-clean-libtool: + +scale$(EXEEXT): $(scale_OBJECTS) $(scale_DEPENDENCIES) + @rm -f scale$(EXEEXT) + $(CXXLINK) $(scale_LDFLAGS) $(scale_OBJECTS) $(scale_LDADD) $(LIBS) +.cpp.o: + $(CXXCOMPILE) -c $< +.cpp.obj: + $(CXXCOMPILE) -c `cygpath -w $<` +.cpp.lo: + $(LTCXXCOMPILE) -c $< tags: TAGS -ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ +ID: $(HEADERS) $(SOURCES) $(LISP) + list='$(SOURCES) $(HEADERS)'; \ + unique=`for i in $$list; do echo $$i; done | \ + awk ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ - mkid -fID $$unique + here=`pwd` && cd $(srcdir) \ + && mkid -f$$here/ID $$unique $(LISP) -TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) +TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP) tags=; \ here=`pwd`; \ - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ + list='$(SOURCES) $(HEADERS)'; \ + unique=`for i in $$list; do echo $$i; done | \ + awk ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ - test -z "$(ETAGS_ARGS)$$tags$$unique" \ - || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$tags $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && cd $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) $$here + test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \ + || (cd $(srcdir) && etags -o $$here/TAGS $(ETAGS_ARGS) $$tags $$unique $(LISP)) + +mostlyclean-tags: + +clean-tags: distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) + -rm -f TAGS ID + +maintainer-clean-tags: -top_distdir = ../../.. -distdir = $(top_distdir)/$(PACKAGE)-$(VERSION) +distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir) + +subdir = src/examples/scale distdir: $(DISTFILES) - @list='$(DISTFILES)'; for file in $$list; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test "$$dir" != "$$file" && test "$$dir" != "."; then \ - dir="/$$dir"; \ - $(mkinstalldirs) "$(distdir)$$dir"; \ - else \ - dir=''; \ - fi; \ + here=`cd $(top_builddir) && pwd`; \ + top_distdir=`cd $(top_distdir) && pwd`; \ + distdir=`cd $(distdir) && pwd`; \ + cd $(top_srcdir) \ + && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu src/examples/scale/Makefile + @for file in $(DISTFILES); do \ + d=$(srcdir); \ if test -d $$d/$$file; then \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ - fi; \ - cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + cp -pr $$d/$$file $(distdir)/$$file; \ else \ test -f $(distdir)/$$file \ - || cp -p $$d/$$file $(distdir)/$$file \ - || exit 1; \ + || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ + || cp -p $$d/$$file $(distdir)/$$file || :; \ fi; \ done -check-am: all-am -check: check-am -all-am: Makefile $(PROGRAMS) -installdirs: +DEPS_MAGIC := $(shell mkdir .deps > /dev/null 2>&1 || :) -install: install-am +-include $(DEP_FILES) + +mostlyclean-depend: + +clean-depend: + +distclean-depend: + -rm -rf .deps + +maintainer-clean-depend: + +%.o: %.c + @echo '$(COMPILE) -c $<'; \ + $(COMPILE) -Wp,-MD,.deps/$(*F).pp -c $< + @-cp .deps/$(*F).pp .deps/$(*F).P; \ + tr ' ' '\012' < .deps/$(*F).pp \ + | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \ + >> .deps/$(*F).P; \ + rm .deps/$(*F).pp + +%.lo: %.c + @echo '$(LTCOMPILE) -c $<'; \ + $(LTCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $< + @-sed -e 's/^\([^:]*\)\.o[ ]*:/\1.lo \1.o :/' \ + < .deps/$(*F).pp > .deps/$(*F).P; \ + tr ' ' '\012' < .deps/$(*F).pp \ + | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \ + >> .deps/$(*F).P; \ + rm -f .deps/$(*F).pp + +%.o: %.cpp + @echo '$(CXXCOMPILE) -c $<'; \ + $(CXXCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $< + @-cp .deps/$(*F).pp .deps/$(*F).P; \ + tr ' ' '\012' < .deps/$(*F).pp \ + | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \ + >> .deps/$(*F).P; \ + rm .deps/$(*F).pp + +%.lo: %.cpp + @echo '$(LTCXXCOMPILE) -c $<'; \ + $(LTCXXCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $< + @-sed -e 's/^\([^:]*\)\.o[ ]*:/\1.lo \1.o :/' \ + < .deps/$(*F).pp > .deps/$(*F).P; \ + tr ' ' '\012' < .deps/$(*F).pp \ + | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \ + >> .deps/$(*F).P; \ + rm -f .deps/$(*F).pp +info-am: +info: info-am +dvi-am: +dvi: dvi-am +check-am: all-am +check: check-am +installcheck-am: +installcheck: installcheck-am +install-exec-am: install-exec: install-exec-am + +install-data-am: install-data: install-data-am -uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am +install: install-am +uninstall-am: +uninstall: uninstall-am +all-am: Makefile $(PROGRAMS) +all-redirect: all-am install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install + $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install +installdirs: + + mostlyclean-generic: clean-generic: distclean-generic: -rm -f Makefile $(CONFIG_CLEAN_FILES) + -rm -f config.cache config.log stamp-h stamp-h[0-9]* -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES) maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-am - -clean-am: clean-generic clean-libtool clean-noinstPROGRAMS \ - mostlyclean-am - -distclean: distclean-am - -distclean-am: clean-am distclean-compile distclean-depend \ - distclean-generic distclean-libtool distclean-tags - -dvi: dvi-am - -dvi-am: - -info: info-am +mostlyclean-am: mostlyclean-noinstPROGRAMS mostlyclean-compile \ + mostlyclean-libtool mostlyclean-tags mostlyclean-depend \ + mostlyclean-generic -info-am: +mostlyclean: mostlyclean-am -install-data-am: +clean-am: clean-noinstPROGRAMS clean-compile clean-libtool clean-tags \ + clean-depend clean-generic mostlyclean-am -install-exec-am: +clean: clean-am -install-info: install-info-am +distclean-am: distclean-noinstPROGRAMS distclean-compile \ + distclean-libtool distclean-tags distclean-depend \ + distclean-generic clean-am + -rm -f libtool -install-man: +distclean: distclean-am -installcheck-am: +maintainer-clean-am: maintainer-clean-noinstPROGRAMS \ + maintainer-clean-compile maintainer-clean-libtool \ + maintainer-clean-tags maintainer-clean-depend \ + maintainer-clean-generic distclean-am + @echo "This command is intended for maintainers to use;" + @echo "it deletes files that may require special tools to rebuild." maintainer-clean: maintainer-clean-am -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-compile mostlyclean-generic \ - mostlyclean-libtool - -uninstall-am: uninstall-info-am +.PHONY: mostlyclean-noinstPROGRAMS distclean-noinstPROGRAMS \ +clean-noinstPROGRAMS maintainer-clean-noinstPROGRAMS \ +mostlyclean-compile distclean-compile clean-compile \ +maintainer-clean-compile mostlyclean-libtool distclean-libtool \ +clean-libtool maintainer-clean-libtool tags mostlyclean-tags \ +distclean-tags clean-tags maintainer-clean-tags distdir \ +mostlyclean-depend distclean-depend clean-depend \ +maintainer-clean-depend info-am info dvi-am dvi check check-am \ +installcheck-am installcheck install-exec-am install-exec \ +install-data-am install-data install-am install uninstall-am uninstall \ +all-redirect all-am all installdirs mostlyclean-generic \ +distclean-generic clean-generic maintainer-clean-generic clean \ +mostlyclean distclean maintainer-clean -.PHONY: GTAGS all all-am check check-am clean clean-generic \ - clean-libtool clean-noinstPROGRAMS distclean distclean-compile \ - distclean-depend distclean-generic distclean-libtool \ - distclean-tags distdir dvi dvi-am info info-am install \ - install-am install-data install-data-am install-exec \ - install-exec-am install-info install-info-am install-man \ - install-strip installcheck installcheck-am installdirs \ - maintainer-clean maintainer-clean-generic mostlyclean \ - mostlyclean-compile mostlyclean-generic mostlyclean-libtool \ - tags uninstall uninstall-am uninstall-info-am # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. --- tse3-0.2.7.orig/src/examples/Makefile.in +++ tse3-0.2.7/src/examples/Makefile.in @@ -1,8 +1,6 @@ -# Makefile.in generated by automake 1.6.3 from Makefile.am. -# @configure_input@ +# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am -# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 -# Free Software Foundation, Inc. +# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. @@ -12,7 +10,7 @@ # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. -@SET_MAKE@ + SHELL = @SHELL@ srcdir = @srcdir@ @@ -33,9 +31,13 @@ mandir = @mandir@ includedir = @includedir@ oldincludedir = /usr/include + +DESTDIR = + pkgdatadir = $(datadir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ + top_builddir = ../.. ACLOCAL = @ACLOCAL@ @@ -43,16 +45,12 @@ AUTOMAKE = @AUTOMAKE@ AUTOHEADER = @AUTOHEADER@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd INSTALL = @INSTALL@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS) INSTALL_DATA = @INSTALL_DATA@ -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_HEADER = $(INSTALL_DATA) transform = @program_transform_name@ + NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : @@ -61,29 +59,34 @@ POST_UNINSTALL = : host_alias = @host_alias@ host_triplet = @host@ - -EXEEXT = @EXEEXT@ -OBJEXT = @OBJEXT@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -AMTAR = @AMTAR@ +AR = @AR@ AS = @AS@ -AWK = @AWK@ CC = @CC@ CPP = @CPP@ CPP_MM = @CPP_MM@ CXX = @CXX@ -DEPDIR = @DEPDIR@ +CXXCPP = @CXXCPP@ DLLTOOL = @DLLTOOL@ ECHO = @ECHO@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +EGREP = @EGREP@ +EXEEXT = @EXEEXT@ +F77 = @F77@ +GCJ = @GCJ@ +GCJFLAGS = @GCJFLAGS@ +HAVE_LIB = @HAVE_LIB@ +LIB = @LIB@ LIBARTS = @LIBARTS@ LIBASOUND = @LIBASOUND@ LIBTOOL = @LIBTOOL@ LIBTOOL_DEPS = @LIBTOOL_DEPS@ LN_S = @LN_S@ +LTLIB = @LTLIB@ +MAKEINFO = @MAKEINFO@ OBJDUMP = @OBJDUMP@ +OBJEXT = @OBJEXT@ PACKAGE = @PACKAGE@ RANLIB = @RANLIB@ +RC = @RC@ STRIP = @STRIP@ TSE3_ALSA_PREFIX = @TSE3_ALSA_PREFIX@ TSE3_ALSA_VERSION = @TSE3_ALSA_VERSION@ @@ -95,41 +98,28 @@ TSE3_WITH_OSS = @TSE3_WITH_OSS@ TSE3_WITH_WIN32 = @TSE3_WITH_WIN32@ VERSION = @VERSION@ -am__include = @am__include@ -am__quote = @am__quote@ -install_sh = @install_sh@ + SUBDIRS = scale midifile contents ports recording EXTRA_DIST = README -subdir = src/examples mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = -DIST_SOURCES = - -RECURSIVE_TARGETS = info-recursive dvi-recursive install-info-recursive \ - uninstall-info-recursive all-recursive install-data-recursive \ - install-exec-recursive installdirs-recursive install-recursive \ - uninstall-recursive check-recursive installcheck-recursive -DIST_COMMON = README Makefile.am Makefile.in -DIST_SUBDIRS = $(SUBDIRS) -all: all-recursive +CONFIG_HEADER = ../../config.h +CONFIG_CLEAN_FILES = +DIST_COMMON = README Makefile.am Makefile.in -.SUFFIXES: -$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) - cd $(top_srcdir) && \ - $(AUTOMAKE) --gnu src/examples/Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe) -mostlyclean-libtool: - -rm -f *.lo +DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) -clean-libtool: - -rm -rf .libs _libs +TAR = tar +GZIP_ENV = --best +all: all-redirect +.SUFFIXES: +$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) + cd $(top_srcdir) && $(AUTOMAKE) --gnu src/examples/Makefile + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES) + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status -distclean-libtool: - -rm -f libtool -uninstall-info-am: # This directory's subdirectories are mostly independent; you can cd # into them and run `make' without going through this Makefile. @@ -137,8 +127,13 @@ # (1) if the variable is set in `config.status', edit `config.status' # (which will cause the Makefiles to be regenerated when you run `make'); # (2) otherwise, pass the desired values on the `make' command line. -$(RECURSIVE_TARGETS): - @set fnord $$MAKEFLAGS; amf=$$2; \ + +@SET_MAKE@ + +all-recursive install-data-recursive install-exec-recursive \ +installdirs-recursive install-recursive uninstall-recursive \ +check-recursive installcheck-recursive info-recursive dvi-recursive: + @set fnord $(MAKEFLAGS); amf=$$2; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ @@ -158,18 +153,13 @@ mostlyclean-recursive clean-recursive distclean-recursive \ maintainer-clean-recursive: - @set fnord $$MAKEFLAGS; amf=$$2; \ + @set fnord $(MAKEFLAGS); amf=$$2; \ dot_seen=no; \ - case "$@" in \ - distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ - *) list='$(SUBDIRS)' ;; \ - esac; \ - rev=''; for subdir in $$list; do \ - if test "$$subdir" = "."; then :; else \ - rev="$$subdir $$rev"; \ - fi; \ + rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \ + rev="$$subdir $$rev"; \ + test "$$subdir" != "." || dot_seen=yes; \ done; \ - rev="$$rev ."; \ + test "$$dot_seen" = "no" && rev=". $$rev"; \ target=`echo $@ | sed s/-recursive//`; \ for subdir in $$rev; do \ echo "Making $$target in $$subdir"; \ @@ -186,168 +176,139 @@ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ done -ETAGS = etags -ETAGSFLAGS = - tags: TAGS -ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ +ID: $(HEADERS) $(SOURCES) $(LISP) + list='$(SOURCES) $(HEADERS)'; \ + unique=`for i in $$list; do echo $$i; done | \ + awk ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ - mkid -fID $$unique + here=`pwd` && cd $(srcdir) \ + && mkid -f$$here/ID $$unique $(LISP) -TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) +TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP) tags=; \ here=`pwd`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ - if test "$$subdir" = .; then :; else \ + if test "$$subdir" = .; then :; else \ test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \ - fi; \ + fi; \ done; \ - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ + list='$(SOURCES) $(HEADERS)'; \ + unique=`for i in $$list; do echo $$i; done | \ + awk ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ - test -z "$(ETAGS_ARGS)$$tags$$unique" \ - || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$tags $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && cd $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) $$here + test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \ + || (cd $(srcdir) && etags -o $$here/TAGS $(ETAGS_ARGS) $$tags $$unique $(LISP)) + +mostlyclean-tags: + +clean-tags: distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) + -rm -f TAGS ID + +maintainer-clean-tags: -top_distdir = ../.. -distdir = $(top_distdir)/$(PACKAGE)-$(VERSION) +distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir) + +subdir = src/examples distdir: $(DISTFILES) - @list='$(DISTFILES)'; for file in $$list; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test "$$dir" != "$$file" && test "$$dir" != "."; then \ - dir="/$$dir"; \ - $(mkinstalldirs) "$(distdir)$$dir"; \ - else \ - dir=''; \ - fi; \ + here=`cd $(top_builddir) && pwd`; \ + top_distdir=`cd $(top_distdir) && pwd`; \ + distdir=`cd $(distdir) && pwd`; \ + cd $(top_srcdir) \ + && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu src/examples/Makefile + @for file in $(DISTFILES); do \ + d=$(srcdir); \ if test -d $$d/$$file; then \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ - fi; \ - cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + cp -pr $$d/$$file $(distdir)/$$file; \ else \ test -f $(distdir)/$$file \ - || cp -p $$d/$$file $(distdir)/$$file \ - || exit 1; \ + || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ + || cp -p $$d/$$file $(distdir)/$$file || :; \ fi; \ done - list='$(SUBDIRS)'; for subdir in $$list; do \ + for subdir in $(SUBDIRS); do \ if test "$$subdir" = .; then :; else \ test -d $(distdir)/$$subdir \ || mkdir $(distdir)/$$subdir \ || exit 1; \ - (cd $$subdir && \ - $(MAKE) $(AM_MAKEFLAGS) \ - top_distdir="$(top_distdir)" \ - distdir=../$(distdir)/$$subdir \ - distdir) \ + chmod 777 $(distdir)/$$subdir; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(top_distdir) distdir=../$(distdir)/$$subdir distdir) \ || exit 1; \ fi; \ done +info-am: +info: info-recursive +dvi-am: +dvi: dvi-recursive check-am: all-am check: check-recursive -all-am: Makefile -installdirs: installdirs-recursive -installdirs-am: - -install: install-recursive +installcheck-am: +installcheck: installcheck-recursive +install-exec-am: install-exec: install-exec-recursive + +install-data-am: install-data: install-data-recursive -uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-recursive +install: install-recursive +uninstall-am: +uninstall: uninstall-recursive +all-am: Makefile +all-redirect: all-recursive install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install + $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install +installdirs: installdirs-recursive +installdirs-am: + + mostlyclean-generic: clean-generic: distclean-generic: -rm -f Makefile $(CONFIG_CLEAN_FILES) + -rm -f config.cache config.log stamp-h stamp-h[0-9]* maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-recursive - -clean-am: clean-generic clean-libtool mostlyclean-am - -distclean: distclean-recursive - -distclean-am: clean-am distclean-generic distclean-libtool \ - distclean-tags +mostlyclean-am: mostlyclean-tags mostlyclean-generic -dvi: dvi-recursive - -dvi-am: - -info: info-recursive +mostlyclean: mostlyclean-recursive -info-am: +clean-am: clean-tags clean-generic mostlyclean-am -install-data-am: - -install-exec-am: +clean: clean-recursive -install-info: install-info-recursive +distclean-am: distclean-tags distclean-generic clean-am + -rm -f libtool -install-man: +distclean: distclean-recursive -installcheck-am: +maintainer-clean-am: maintainer-clean-tags maintainer-clean-generic \ + distclean-am + @echo "This command is intended for maintainers to use;" + @echo "it deletes files that may require special tools to rebuild." maintainer-clean: maintainer-clean-recursive -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-recursive - -mostlyclean-am: mostlyclean-generic mostlyclean-libtool - -uninstall-am: uninstall-info-am - -uninstall-info: uninstall-info-recursive +.PHONY: install-data-recursive uninstall-data-recursive \ +install-exec-recursive uninstall-exec-recursive installdirs-recursive \ +uninstalldirs-recursive all-recursive check-recursive \ +installcheck-recursive info-recursive dvi-recursive \ +mostlyclean-recursive distclean-recursive clean-recursive \ +maintainer-clean-recursive tags tags-recursive mostlyclean-tags \ +distclean-tags clean-tags maintainer-clean-tags distdir info-am info \ +dvi-am dvi check check-am installcheck-am installcheck install-exec-am \ +install-exec install-data-am install-data install-am install \ +uninstall-am uninstall all-redirect all-am all installdirs-am \ +installdirs mostlyclean-generic distclean-generic clean-generic \ +maintainer-clean-generic clean mostlyclean distclean maintainer-clean -.PHONY: $(RECURSIVE_TARGETS) GTAGS all all-am check check-am clean \ - clean-generic clean-libtool clean-recursive distclean \ - distclean-generic distclean-libtool distclean-recursive \ - distclean-tags distdir dvi dvi-am dvi-recursive info info-am \ - info-recursive install install-am install-data install-data-am \ - install-data-recursive install-exec install-exec-am \ - install-exec-recursive install-info install-info-am \ - install-info-recursive install-man install-recursive \ - install-strip installcheck installcheck-am installdirs \ - installdirs-am installdirs-recursive maintainer-clean \ - maintainer-clean-generic maintainer-clean-recursive mostlyclean \ - mostlyclean-generic mostlyclean-libtool mostlyclean-recursive \ - tags tags-recursive uninstall uninstall-am uninstall-info-am \ - uninstall-info-recursive uninstall-recursive # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. --- tse3-0.2.7.orig/src/tse3/Makefile.in +++ tse3-0.2.7/src/tse3/Makefile.in @@ -1,8 +1,6 @@ -# Makefile.in generated by automake 1.6.3 from Makefile.am. -# @configure_input@ +# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am -# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 -# Free Software Foundation, Inc. +# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. @@ -12,7 +10,7 @@ # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. -@SET_MAKE@ + SHELL = @SHELL@ srcdir = @srcdir@ @@ -33,9 +31,13 @@ mandir = @mandir@ includedir = @includedir@ oldincludedir = /usr/include + +DESTDIR = + pkgdatadir = $(datadir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ + top_builddir = ../.. ACLOCAL = @ACLOCAL@ @@ -43,16 +45,12 @@ AUTOMAKE = @AUTOMAKE@ AUTOHEADER = @AUTOHEADER@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd INSTALL = @INSTALL@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS) INSTALL_DATA = @INSTALL_DATA@ -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_HEADER = $(INSTALL_DATA) transform = @program_transform_name@ + NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : @@ -61,29 +59,34 @@ POST_UNINSTALL = : host_alias = @host_alias@ host_triplet = @host@ - -EXEEXT = @EXEEXT@ -OBJEXT = @OBJEXT@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -AMTAR = @AMTAR@ +AR = @AR@ AS = @AS@ -AWK = @AWK@ CC = @CC@ CPP = @CPP@ CPP_MM = @CPP_MM@ CXX = @CXX@ -DEPDIR = @DEPDIR@ +CXXCPP = @CXXCPP@ DLLTOOL = @DLLTOOL@ ECHO = @ECHO@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +EGREP = @EGREP@ +EXEEXT = @EXEEXT@ +F77 = @F77@ +GCJ = @GCJ@ +GCJFLAGS = @GCJFLAGS@ +HAVE_LIB = @HAVE_LIB@ +LIB = @LIB@ LIBARTS = @LIBARTS@ LIBASOUND = @LIBASOUND@ LIBTOOL = @LIBTOOL@ LIBTOOL_DEPS = @LIBTOOL_DEPS@ LN_S = @LN_S@ +LTLIB = @LTLIB@ +MAKEINFO = @MAKEINFO@ OBJDUMP = @OBJDUMP@ +OBJEXT = @OBJEXT@ PACKAGE = @PACKAGE@ RANLIB = @RANLIB@ +RC = @RC@ STRIP = @STRIP@ TSE3_ALSA_PREFIX = @TSE3_ALSA_PREFIX@ TSE3_ALSA_VERSION = @TSE3_ALSA_VERSION@ @@ -95,9 +98,7 @@ TSE3_WITH_OSS = @TSE3_WITH_OSS@ TSE3_WITH_WIN32 = @TSE3_WITH_WIN32@ VERSION = @VERSION@ -am__include = @am__include@ -am__quote = @am__quote@ -install_sh = @install_sh@ + tse3h_HEADERS = DisplayParams.h Error.h EventTrack.h FileBlockParser.h Filter.h TSE2MDL.h FlagTrack.h KeySigTrack.h Metronome.h Midi.h MidiCommandFilter.h MidiData.h MidiEcho.h MidiFile.h MidiFilter.h MidiMapper.h MidiParams.h Mixer.h Mutex.h Notifier.h Panic.h Part.h Phrase.h PhraseEdit.h PhraseList.h Playable.h Progress.h RepeatTrack.h MidiScheduler.h Serializable.h Song.h TempoTrack.h TimeSigTrack.h Track.h Transport.h TSE3.h TSE3MDL.h tse3hdir = $(pkgincludedir) @@ -109,14 +110,8 @@ EXTRA_DIST = tse3.3 #libtse3_la_CXXFLAGS = -#libtse3_la_LDFLAGS = --strip-unneeded -libtse3_la_LIBADD = \ - ./app/libtse3app.la \ - ./cmd/libtse3cmd.la \ - ./file/libtse3file.la \ - ./ins/libtse3ins.la \ - ./plt/libtse3plt.la \ - ./util/libtse3util.la +libtse3_la_LDFLAGS = -release $(VERSION) +libtse3_la_LIBADD = ./app/libtse3app.la ./cmd/libtse3cmd.la ./file/libtse3file.la ./ins/libtse3ins.la ./plt/libtse3plt.la ./util/libtse3util.la DISTCLEANFILES = ./.deps/* ./.deps/.P @@ -124,213 +119,139 @@ INCLUDES = -I$(top_srcdir)/src SUBDIRS = util cmd plt app ins listen file - # Documentation building -KDOCDIR = $(top_builddir)/doc/api +KDOCDIR = $(top_builddir)/doc/api # Test harnesses + noinst_PROGRAMS = test test_SOURCES = test.cpp test_LDADD = $(top_builddir)/src/tse3/libtse3.la - # McCabe .i file generation + tse3_i_FILES = $(patsubst %.cpp,i/%.i,$(libtse3_la_SOURCES)) -subdir = src/tse3 mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = -LTLIBRARIES = $(lib_LTLIBRARIES) - -libtse3_la_LDFLAGS = -libtse3_la_DEPENDENCIES = ./app/libtse3app.la ./cmd/libtse3cmd.la \ - ./file/libtse3file.la ./ins/libtse3ins.la ./plt/libtse3plt.la \ - ./util/libtse3util.la -am_libtse3_la_OBJECTS = DisplayParams.lo Error.lo FileBlockParser.lo \ - Filter.lo TSE2MDL.lo FlagTrack.lo KeySigTrack.lo Metronome.lo \ - Midi.lo MidiCommandFilter.lo MidiData.lo MidiEcho.lo \ - MidiFile.lo MidiFilter.lo MidiMapper.lo MidiParams.lo Mixer.lo \ - Mutex.lo Notifier.lo Panic.lo Part.lo Phrase.lo PhraseEdit.lo \ - PhraseList.lo Playable.lo RepeatTrack.lo MidiScheduler.lo \ - Serializable.lo Song.lo TempoTrack.lo TimeSigTrack.lo Track.lo \ - Transport.lo TSE3.lo TSE3MDL.lo -libtse3_la_OBJECTS = $(am_libtse3_la_OBJECTS) -noinst_PROGRAMS = test$(EXEEXT) -PROGRAMS = $(noinst_PROGRAMS) - -am_test_OBJECTS = test.$(OBJEXT) -test_OBJECTS = $(am_test_OBJECTS) -test_DEPENDENCIES = $(top_builddir)/src/tse3/libtse3.la -test_LDFLAGS = +CONFIG_HEADER = ../../config.h +CONFIG_CLEAN_FILES = +LTLIBRARIES = $(lib_LTLIBRARIES) + -DEFS = @DEFS@ -DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir) +DEFS = @DEFS@ -I. -I$(srcdir) -I../.. CPPFLAGS = @CPPFLAGS@ LDFLAGS = @LDFLAGS@ LIBS = @LIBS@ -depcomp = $(SHELL) $(top_srcdir)/depcomp -am__depfiles_maybe = depfiles -@AMDEP_TRUE@DEP_FILES = ./$(DEPDIR)/DisplayParams.Plo \ -@AMDEP_TRUE@ ./$(DEPDIR)/Error.Plo \ -@AMDEP_TRUE@ ./$(DEPDIR)/FileBlockParser.Plo \ -@AMDEP_TRUE@ ./$(DEPDIR)/Filter.Plo ./$(DEPDIR)/FlagTrack.Plo \ -@AMDEP_TRUE@ ./$(DEPDIR)/KeySigTrack.Plo \ -@AMDEP_TRUE@ ./$(DEPDIR)/Metronome.Plo ./$(DEPDIR)/Midi.Plo \ -@AMDEP_TRUE@ ./$(DEPDIR)/MidiCommandFilter.Plo \ -@AMDEP_TRUE@ ./$(DEPDIR)/MidiData.Plo ./$(DEPDIR)/MidiEcho.Plo \ -@AMDEP_TRUE@ ./$(DEPDIR)/MidiFile.Plo ./$(DEPDIR)/MidiFilter.Plo \ -@AMDEP_TRUE@ ./$(DEPDIR)/MidiMapper.Plo \ -@AMDEP_TRUE@ ./$(DEPDIR)/MidiParams.Plo \ -@AMDEP_TRUE@ ./$(DEPDIR)/MidiScheduler.Plo ./$(DEPDIR)/Mixer.Plo \ -@AMDEP_TRUE@ ./$(DEPDIR)/Mutex.Plo ./$(DEPDIR)/Notifier.Plo \ -@AMDEP_TRUE@ ./$(DEPDIR)/Panic.Plo ./$(DEPDIR)/Part.Plo \ -@AMDEP_TRUE@ ./$(DEPDIR)/Phrase.Plo ./$(DEPDIR)/PhraseEdit.Plo \ -@AMDEP_TRUE@ ./$(DEPDIR)/PhraseList.Plo ./$(DEPDIR)/Playable.Plo \ -@AMDEP_TRUE@ ./$(DEPDIR)/RepeatTrack.Plo \ -@AMDEP_TRUE@ ./$(DEPDIR)/Serializable.Plo ./$(DEPDIR)/Song.Plo \ -@AMDEP_TRUE@ ./$(DEPDIR)/TSE2MDL.Plo ./$(DEPDIR)/TSE3.Plo \ -@AMDEP_TRUE@ ./$(DEPDIR)/TSE3MDL.Plo ./$(DEPDIR)/TempoTrack.Plo \ -@AMDEP_TRUE@ ./$(DEPDIR)/TimeSigTrack.Plo ./$(DEPDIR)/Track.Plo \ -@AMDEP_TRUE@ ./$(DEPDIR)/Transport.Plo ./$(DEPDIR)/test.Po -CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ - $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -LTCXXCOMPILE = $(LIBTOOL) --mode=compile $(CXX) $(DEFS) \ - $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ - $(AM_CXXFLAGS) $(CXXFLAGS) -CXXLD = $(CXX) -CXXLINK = $(LIBTOOL) --mode=link $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) \ - $(AM_LDFLAGS) $(LDFLAGS) -o $@ +libtse3_la_DEPENDENCIES = ./app/libtse3app.la ./cmd/libtse3cmd.la \ +./file/libtse3file.la ./ins/libtse3ins.la ./plt/libtse3plt.la \ +./util/libtse3util.la +libtse3_la_OBJECTS = DisplayParams.lo Error.lo FileBlockParser.lo \ +Filter.lo TSE2MDL.lo FlagTrack.lo KeySigTrack.lo Metronome.lo Midi.lo \ +MidiCommandFilter.lo MidiData.lo MidiEcho.lo MidiFile.lo MidiFilter.lo \ +MidiMapper.lo MidiParams.lo Mixer.lo Mutex.lo Notifier.lo Panic.lo \ +Part.lo Phrase.lo PhraseEdit.lo PhraseList.lo Playable.lo \ +RepeatTrack.lo MidiScheduler.lo Serializable.lo Song.lo TempoTrack.lo \ +TimeSigTrack.lo Track.lo Transport.lo TSE3.lo TSE3MDL.lo +noinst_PROGRAMS = test$(EXEEXT) +PROGRAMS = $(noinst_PROGRAMS) + +test_OBJECTS = test.$(OBJEXT) +test_DEPENDENCIES = $(top_builddir)/src/tse3/libtse3.la +test_LDFLAGS = CXXFLAGS = @CXXFLAGS@ -DIST_SOURCES = $(libtse3_la_SOURCES) $(test_SOURCES) +CXXCOMPILE = $(CXX) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) +LTCXXCOMPILE = $(LIBTOOL) --mode=compile $(CXX) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) +CXXLD = $(CXX) +CXXLINK = $(LIBTOOL) --mode=link $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) $(LDFLAGS) -o $@ +man3dir = $(mandir)/man3 +MANS = $(man_MANS) NROFF = nroff -MANS = $(man_MANS) -HEADERS = $(tse3h_HEADERS) +HEADERS = $(tse3h_HEADERS) +DIST_COMMON = Makefile.am Makefile.in -RECURSIVE_TARGETS = info-recursive dvi-recursive install-info-recursive \ - uninstall-info-recursive all-recursive install-data-recursive \ - install-exec-recursive installdirs-recursive install-recursive \ - uninstall-recursive check-recursive installcheck-recursive -DIST_COMMON = $(tse3h_HEADERS) Makefile.am Makefile.in -DIST_SUBDIRS = $(SUBDIRS) -SOURCES = $(libtse3_la_SOURCES) $(test_SOURCES) -all: all-recursive +DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) + +TAR = tar +GZIP_ENV = --best +DEP_FILES = .deps/DisplayParams.P .deps/Error.P .deps/FileBlockParser.P \ +.deps/Filter.P .deps/FlagTrack.P .deps/KeySigTrack.P .deps/Metronome.P \ +.deps/Midi.P .deps/MidiCommandFilter.P .deps/MidiData.P \ +.deps/MidiEcho.P .deps/MidiFile.P .deps/MidiFilter.P .deps/MidiMapper.P \ +.deps/MidiParams.P .deps/MidiScheduler.P .deps/Mixer.P .deps/Mutex.P \ +.deps/Notifier.P .deps/Panic.P .deps/Part.P .deps/Phrase.P \ +.deps/PhraseEdit.P .deps/PhraseList.P .deps/Playable.P \ +.deps/RepeatTrack.P .deps/Serializable.P .deps/Song.P .deps/TSE2MDL.P \ +.deps/TSE3.P .deps/TSE3MDL.P .deps/TempoTrack.P .deps/TimeSigTrack.P \ +.deps/Track.P .deps/Transport.P .deps/test.P +SOURCES = $(libtse3_la_SOURCES) $(test_SOURCES) +OBJECTS = $(libtse3_la_OBJECTS) $(test_OBJECTS) +all: all-redirect .SUFFIXES: -.SUFFIXES: .cpp .lo .o .obj -$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) - cd $(top_srcdir) && \ - $(AUTOMAKE) --gnu src/tse3/Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe) -libLTLIBRARIES_INSTALL = $(INSTALL) +.SUFFIXES: .S .c .cpp .lo .o .obj .s +$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) + cd $(top_srcdir) && $(AUTOMAKE) --gnu src/tse3/Makefile + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES) + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status + + +mostlyclean-libLTLIBRARIES: + +clean-libLTLIBRARIES: + -test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES) + +distclean-libLTLIBRARIES: + +maintainer-clean-libLTLIBRARIES: + install-libLTLIBRARIES: $(lib_LTLIBRARIES) @$(NORMAL_INSTALL) $(mkinstalldirs) $(DESTDIR)$(libdir) @list='$(lib_LTLIBRARIES)'; for p in $$list; do \ if test -f $$p; then \ - f="`echo $$p | sed -e 's|^.*/||'`"; \ - echo " $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) $$p $(DESTDIR)$(libdir)/$$f"; \ - $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) $$p $(DESTDIR)$(libdir)/$$f; \ + echo "$(LIBTOOL) --mode=install $(INSTALL) $$p $(DESTDIR)$(libdir)/$$p"; \ + $(LIBTOOL) --mode=install $(INSTALL) $$p $(DESTDIR)$(libdir)/$$p; \ else :; fi; \ done uninstall-libLTLIBRARIES: @$(NORMAL_UNINSTALL) - @list='$(lib_LTLIBRARIES)'; for p in $$list; do \ - p="`echo $$p | sed -e 's|^.*/||'`"; \ - echo " $(LIBTOOL) --mode=uninstall rm -f $(DESTDIR)$(libdir)/$$p"; \ - $(LIBTOOL) --mode=uninstall rm -f $(DESTDIR)$(libdir)/$$p; \ + list='$(lib_LTLIBRARIES)'; for p in $$list; do \ + $(LIBTOOL) --mode=uninstall rm -f $(DESTDIR)$(libdir)/$$p; \ done -clean-libLTLIBRARIES: - -test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES) - @list='$(lib_LTLIBRARIES)'; for p in $$list; do \ - dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \ - test -z "$dir" && dir=.; \ - echo "rm -f \"$${dir}/so_locations\""; \ - rm -f "$${dir}/so_locations"; \ - done -libtse3.la: $(libtse3_la_OBJECTS) $(libtse3_la_DEPENDENCIES) - $(CXXLINK) -rpath $(libdir) $(libtse3_la_LDFLAGS) $(libtse3_la_OBJECTS) $(libtse3_la_LIBADD) $(LIBS) +# FIXME: We should only use cygpath when building on Windows, +# and only if it is available. +.c.obj: + $(COMPILE) -c `cygpath -w $<` -clean-noinstPROGRAMS: - @list='$(noinst_PROGRAMS)'; for p in $$list; do \ - f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ - echo " rm -f $$p $$f"; \ - rm -f $$p $$f ; \ - done -test$(EXEEXT): $(test_OBJECTS) $(test_DEPENDENCIES) - @rm -f test$(EXEEXT) - $(CXXLINK) $(test_LDFLAGS) $(test_OBJECTS) $(test_LDADD) $(LIBS) +.s.o: + $(COMPILE) -c $< + +.S.o: + $(COMPILE) -c $< mostlyclean-compile: - -rm -f *.$(OBJEXT) core *.core + -rm -f *.o core *.core + -rm -f *.$(OBJEXT) + +clean-compile: distclean-compile: -rm -f *.tab.c -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/DisplayParams.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/Error.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/FileBlockParser.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/Filter.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/FlagTrack.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/KeySigTrack.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/Metronome.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/Midi.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/MidiCommandFilter.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/MidiData.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/MidiEcho.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/MidiFile.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/MidiFilter.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/MidiMapper.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/MidiParams.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/MidiScheduler.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/Mixer.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/Mutex.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/Notifier.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/Panic.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/Part.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/Phrase.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/PhraseEdit.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/PhraseList.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/Playable.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/RepeatTrack.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/Serializable.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/Song.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/TSE2MDL.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/TSE3.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/TSE3MDL.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/TempoTrack.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/TimeSigTrack.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/Track.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/Transport.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/test.Po@am__quote@ +maintainer-clean-compile: -distclean-depend: - -rm -rf ./$(DEPDIR) - -.cpp.o: -@AMDEP_TRUE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@ -@AMDEP_TRUE@ $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - $(CXXCOMPILE) -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$< - -.cpp.obj: -@AMDEP_TRUE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@ -@AMDEP_TRUE@ $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - $(CXXCOMPILE) -c -o $@ `cygpath -w $<` +.s.lo: + $(LIBTOOL) --mode=compile $(COMPILE) -c $< -.cpp.lo: -@AMDEP_TRUE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ -@AMDEP_TRUE@ depfile='$(DEPDIR)/$*.Plo' tmpdepfile='$(DEPDIR)/$*.TPlo' @AMDEPBACKSLASH@ -@AMDEP_TRUE@ $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - $(LTCXXCOMPILE) -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$< -CXXDEPMODE = @CXXDEPMODE@ +.S.lo: + $(LIBTOOL) --mode=compile $(COMPILE) -c $< mostlyclean-libtool: -rm -f *.lo @@ -339,16 +260,35 @@ -rm -rf .libs _libs distclean-libtool: - -rm -f libtool -uninstall-info-am: -man3dir = $(mandir)/man3 -install-man3: $(man3_MANS) $(man_MANS) - @$(NORMAL_INSTALL) +maintainer-clean-libtool: + +libtse3.la: $(libtse3_la_OBJECTS) $(libtse3_la_DEPENDENCIES) + $(CXXLINK) -rpath $(libdir) $(libtse3_la_LDFLAGS) $(libtse3_la_OBJECTS) $(libtse3_la_LIBADD) $(LIBS) + +mostlyclean-noinstPROGRAMS: + +clean-noinstPROGRAMS: + -test -z "$(noinst_PROGRAMS)" || rm -f $(noinst_PROGRAMS) + +distclean-noinstPROGRAMS: + +maintainer-clean-noinstPROGRAMS: + +test$(EXEEXT): $(test_OBJECTS) $(test_DEPENDENCIES) + @rm -f test$(EXEEXT) + $(CXXLINK) $(test_LDFLAGS) $(test_OBJECTS) $(test_LDADD) $(LIBS) +.cpp.o: + $(CXXCOMPILE) -c $< +.cpp.obj: + $(CXXCOMPILE) -c `cygpath -w $<` +.cpp.lo: + $(LTCXXCOMPILE) -c $< + +install-man3: $(mkinstalldirs) $(DESTDIR)$(man3dir) - @list='$(man3_MANS) $(dist_man3_MANS) $(nodist_man3_MANS)'; \ - l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ - for i in $$l2; do \ + @list='$(man3_MANS)'; \ + l2='$(man_MANS)'; for i in $$l2; do \ case "$$i" in \ *.3*) list="$$list $$i" ;; \ esac; \ @@ -357,21 +297,15 @@ if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \ else file=$$i; fi; \ ext=`echo $$i | sed -e 's/^.*\\.//'`; \ - case "$$ext" in \ - 3*) ;; \ - *) ext='3' ;; \ - esac; \ inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ - inst=`echo $$inst | sed -e 's/^.*\///'`; \ inst=`echo $$inst | sed '$(transform)'`.$$ext; \ echo " $(INSTALL_DATA) $$file $(DESTDIR)$(man3dir)/$$inst"; \ $(INSTALL_DATA) $$file $(DESTDIR)$(man3dir)/$$inst; \ done + uninstall-man3: - @$(NORMAL_UNINSTALL) - @list='$(man3_MANS) $(dist_man3_MANS) $(nodist_man3_MANS)'; \ - l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ - for i in $$l2; do \ + @list='$(man3_MANS)'; \ + l2='$(man_MANS)'; for i in $$l2; do \ case "$$i" in \ *.3*) list="$$list $$i" ;; \ esac; \ @@ -379,28 +313,30 @@ for i in $$list; do \ ext=`echo $$i | sed -e 's/^.*\\.//'`; \ inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ - inst=`echo $$inst | sed -e 's/^.*\///'`; \ inst=`echo $$inst | sed '$(transform)'`.$$ext; \ echo " rm -f $(DESTDIR)$(man3dir)/$$inst"; \ rm -f $(DESTDIR)$(man3dir)/$$inst; \ done -tse3hHEADERS_INSTALL = $(INSTALL_HEADER) +install-man: $(MANS) + @$(NORMAL_INSTALL) + $(MAKE) $(AM_MAKEFLAGS) install-man3 +uninstall-man: + @$(NORMAL_UNINSTALL) + $(MAKE) $(AM_MAKEFLAGS) uninstall-man3 + install-tse3hHEADERS: $(tse3h_HEADERS) @$(NORMAL_INSTALL) $(mkinstalldirs) $(DESTDIR)$(tse3hdir) @list='$(tse3h_HEADERS)'; for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - f="`echo $$p | sed -e 's|^.*/||'`"; \ - echo " $(tse3hHEADERS_INSTALL) $$d$$p $(DESTDIR)$(tse3hdir)/$$f"; \ - $(tse3hHEADERS_INSTALL) $$d$$p $(DESTDIR)$(tse3hdir)/$$f; \ + if test -f "$$p"; then d= ; else d="$(srcdir)/"; fi; \ + echo " $(INSTALL_DATA) $$d$$p $(DESTDIR)$(tse3hdir)/$$p"; \ + $(INSTALL_DATA) $$d$$p $(DESTDIR)$(tse3hdir)/$$p; \ done uninstall-tse3hHEADERS: @$(NORMAL_UNINSTALL) - @list='$(tse3h_HEADERS)'; for p in $$list; do \ - f="`echo $$p | sed -e 's|^.*/||'`"; \ - echo " rm -f $(DESTDIR)$(tse3hdir)/$$f"; \ - rm -f $(DESTDIR)$(tse3hdir)/$$f; \ + list='$(tse3h_HEADERS)'; for p in $$list; do \ + rm -f $(DESTDIR)$(tse3hdir)/$$p; \ done # This directory's subdirectories are mostly independent; you can cd @@ -409,8 +345,13 @@ # (1) if the variable is set in `config.status', edit `config.status' # (which will cause the Makefiles to be regenerated when you run `make'); # (2) otherwise, pass the desired values on the `make' command line. -$(RECURSIVE_TARGETS): - @set fnord $$MAKEFLAGS; amf=$$2; \ + +@SET_MAKE@ + +all-recursive install-data-recursive install-exec-recursive \ +installdirs-recursive install-recursive uninstall-recursive \ +check-recursive installcheck-recursive info-recursive dvi-recursive: + @set fnord $(MAKEFLAGS); amf=$$2; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ @@ -430,18 +371,13 @@ mostlyclean-recursive clean-recursive distclean-recursive \ maintainer-clean-recursive: - @set fnord $$MAKEFLAGS; amf=$$2; \ + @set fnord $(MAKEFLAGS); amf=$$2; \ dot_seen=no; \ - case "$@" in \ - distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ - *) list='$(SUBDIRS)' ;; \ - esac; \ - rev=''; for subdir in $$list; do \ - if test "$$subdir" = "."; then :; else \ - rev="$$subdir $$rev"; \ - fi; \ + rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \ + rev="$$subdir $$rev"; \ + test "$$subdir" != "." || dot_seen=yes; \ done; \ - rev="$$rev ."; \ + test "$$dot_seen" = "no" && rev=". $$rev"; \ target=`echo $@ | sed s/-recursive//`; \ for subdir in $$rev; do \ echo "Making $$target in $$subdir"; \ @@ -458,179 +394,213 @@ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ done -ETAGS = etags -ETAGSFLAGS = - tags: TAGS -ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ +ID: $(HEADERS) $(SOURCES) $(LISP) + list='$(SOURCES) $(HEADERS)'; \ + unique=`for i in $$list; do echo $$i; done | \ + awk ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ - mkid -fID $$unique + here=`pwd` && cd $(srcdir) \ + && mkid -f$$here/ID $$unique $(LISP) -TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) +TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP) tags=; \ here=`pwd`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ - if test "$$subdir" = .; then :; else \ + if test "$$subdir" = .; then :; else \ test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \ - fi; \ + fi; \ done; \ - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ + list='$(SOURCES) $(HEADERS)'; \ + unique=`for i in $$list; do echo $$i; done | \ + awk ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ - test -z "$(ETAGS_ARGS)$$tags$$unique" \ - || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$tags $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && cd $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) $$here + test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \ + || (cd $(srcdir) && etags -o $$here/TAGS $(ETAGS_ARGS) $$tags $$unique $(LISP)) + +mostlyclean-tags: + +clean-tags: distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) + -rm -f TAGS ID -top_distdir = ../.. -distdir = $(top_distdir)/$(PACKAGE)-$(VERSION) +maintainer-clean-tags: + +distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir) + +subdir = src/tse3 distdir: $(DISTFILES) - @list='$(DISTFILES)'; for file in $$list; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test "$$dir" != "$$file" && test "$$dir" != "."; then \ - dir="/$$dir"; \ - $(mkinstalldirs) "$(distdir)$$dir"; \ - else \ - dir=''; \ - fi; \ + here=`cd $(top_builddir) && pwd`; \ + top_distdir=`cd $(top_distdir) && pwd`; \ + distdir=`cd $(distdir) && pwd`; \ + cd $(top_srcdir) \ + && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu src/tse3/Makefile + @for file in $(DISTFILES); do \ + d=$(srcdir); \ if test -d $$d/$$file; then \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ - fi; \ - cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + cp -pr $$d/$$file $(distdir)/$$file; \ else \ test -f $(distdir)/$$file \ - || cp -p $$d/$$file $(distdir)/$$file \ - || exit 1; \ + || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ + || cp -p $$d/$$file $(distdir)/$$file || :; \ fi; \ done - list='$(SUBDIRS)'; for subdir in $$list; do \ + for subdir in $(SUBDIRS); do \ if test "$$subdir" = .; then :; else \ test -d $(distdir)/$$subdir \ || mkdir $(distdir)/$$subdir \ || exit 1; \ - (cd $$subdir && \ - $(MAKE) $(AM_MAKEFLAGS) \ - top_distdir="$(top_distdir)" \ - distdir=../$(distdir)/$$subdir \ - distdir) \ + chmod 777 $(distdir)/$$subdir; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(top_distdir) distdir=../$(distdir)/$$subdir distdir) \ || exit 1; \ fi; \ done + +DEPS_MAGIC := $(shell mkdir .deps > /dev/null 2>&1 || :) + +-include $(DEP_FILES) + +mostlyclean-depend: + +clean-depend: + +distclean-depend: + -rm -rf .deps + +maintainer-clean-depend: + +%.o: %.c + @echo '$(COMPILE) -c $<'; \ + $(COMPILE) -Wp,-MD,.deps/$(*F).pp -c $< + @-cp .deps/$(*F).pp .deps/$(*F).P; \ + tr ' ' '\012' < .deps/$(*F).pp \ + | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \ + >> .deps/$(*F).P; \ + rm .deps/$(*F).pp + +%.lo: %.c + @echo '$(LTCOMPILE) -c $<'; \ + $(LTCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $< + @-sed -e 's/^\([^:]*\)\.o[ ]*:/\1.lo \1.o :/' \ + < .deps/$(*F).pp > .deps/$(*F).P; \ + tr ' ' '\012' < .deps/$(*F).pp \ + | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \ + >> .deps/$(*F).P; \ + rm -f .deps/$(*F).pp + +%.o: %.cpp + @echo '$(CXXCOMPILE) -c $<'; \ + $(CXXCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $< + @-cp .deps/$(*F).pp .deps/$(*F).P; \ + tr ' ' '\012' < .deps/$(*F).pp \ + | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \ + >> .deps/$(*F).P; \ + rm .deps/$(*F).pp + +%.lo: %.cpp + @echo '$(LTCXXCOMPILE) -c $<'; \ + $(LTCXXCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $< + @-sed -e 's/^\([^:]*\)\.o[ ]*:/\1.lo \1.o :/' \ + < .deps/$(*F).pp > .deps/$(*F).P; \ + tr ' ' '\012' < .deps/$(*F).pp \ + | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \ + >> .deps/$(*F).P; \ + rm -f .deps/$(*F).pp +info-am: +info: info-recursive +dvi-am: +dvi: dvi-recursive check-am: all-am check: check-recursive -all-am: Makefile $(LTLIBRARIES) $(PROGRAMS) $(MANS) $(HEADERS) -installdirs: installdirs-recursive -installdirs-am: - $(mkinstalldirs) $(DESTDIR)$(libdir) $(DESTDIR)$(man3dir) $(DESTDIR)$(tse3hdir) - -install: install-recursive +installcheck-am: +installcheck: installcheck-recursive +install-exec-am: install-libLTLIBRARIES install-exec: install-exec-recursive + +install-data-am: install-man install-tse3hHEADERS install-data: install-data-recursive -uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-recursive +install: install-recursive +uninstall-am: uninstall-libLTLIBRARIES uninstall-man \ + uninstall-tse3hHEADERS +uninstall: uninstall-recursive +all-am: Makefile $(LTLIBRARIES) $(PROGRAMS) $(MANS) $(HEADERS) +all-redirect: all-recursive install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install + $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install +installdirs: installdirs-recursive +installdirs-am: + $(mkinstalldirs) $(DESTDIR)$(libdir) $(DESTDIR)$(mandir)/man3 \ + $(DESTDIR)$(tse3hdir) + + mostlyclean-generic: clean-generic: distclean-generic: -rm -f Makefile $(CONFIG_CLEAN_FILES) + -rm -f config.cache config.log stamp-h stamp-h[0-9]* -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES) maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-recursive - -clean-am: clean-generic clean-libLTLIBRARIES clean-libtool \ - clean-noinstPROGRAMS mostlyclean-am - -distclean: distclean-recursive - -distclean-am: clean-am distclean-compile distclean-depend \ - distclean-generic distclean-libtool distclean-tags - -dvi: dvi-recursive - -dvi-am: - -info: info-recursive +mostlyclean-am: mostlyclean-libLTLIBRARIES mostlyclean-compile \ + mostlyclean-libtool mostlyclean-noinstPROGRAMS \ + mostlyclean-tags mostlyclean-depend mostlyclean-generic -info-am: +mostlyclean: mostlyclean-recursive -install-data-am: install-man install-tse3hHEADERS +clean-am: clean-libLTLIBRARIES clean-compile clean-libtool \ + clean-noinstPROGRAMS clean-tags clean-depend \ + clean-generic mostlyclean-am -install-exec-am: install-libLTLIBRARIES +clean: clean-recursive -install-info: install-info-recursive +distclean-am: distclean-libLTLIBRARIES distclean-compile \ + distclean-libtool distclean-noinstPROGRAMS \ + distclean-tags distclean-depend distclean-generic \ + clean-am + -rm -f libtool -install-man: install-man3 +distclean: distclean-recursive -installcheck-am: +maintainer-clean-am: maintainer-clean-libLTLIBRARIES \ + maintainer-clean-compile maintainer-clean-libtool \ + maintainer-clean-noinstPROGRAMS maintainer-clean-tags \ + maintainer-clean-depend maintainer-clean-generic \ + distclean-am + @echo "This command is intended for maintainers to use;" + @echo "it deletes files that may require special tools to rebuild." maintainer-clean: maintainer-clean-recursive -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-recursive - -mostlyclean-am: mostlyclean-compile mostlyclean-generic \ - mostlyclean-libtool - -uninstall-am: uninstall-info-am uninstall-libLTLIBRARIES uninstall-man \ - uninstall-tse3hHEADERS - -uninstall-info: uninstall-info-recursive - -uninstall-man: uninstall-man3 - -.PHONY: $(RECURSIVE_TARGETS) GTAGS all all-am check check-am clean \ - clean-generic clean-libLTLIBRARIES clean-libtool \ - clean-noinstPROGRAMS clean-recursive distclean \ - distclean-compile distclean-depend distclean-generic \ - distclean-libtool distclean-recursive distclean-tags distdir \ - dvi dvi-am dvi-recursive info info-am info-recursive install \ - install-am install-data install-data-am install-data-recursive \ - install-exec install-exec-am install-exec-recursive \ - install-info install-info-am install-info-recursive \ - install-libLTLIBRARIES install-man install-man3 \ - install-recursive install-strip install-tse3hHEADERS \ - installcheck installcheck-am installdirs installdirs-am \ - installdirs-recursive maintainer-clean maintainer-clean-generic \ - maintainer-clean-recursive mostlyclean mostlyclean-compile \ - mostlyclean-generic mostlyclean-libtool mostlyclean-recursive \ - tags tags-recursive uninstall uninstall-am uninstall-info-am \ - uninstall-info-recursive uninstall-libLTLIBRARIES uninstall-man \ - uninstall-man3 uninstall-recursive uninstall-tse3hHEADERS +.PHONY: mostlyclean-libLTLIBRARIES distclean-libLTLIBRARIES \ +clean-libLTLIBRARIES maintainer-clean-libLTLIBRARIES \ +uninstall-libLTLIBRARIES install-libLTLIBRARIES mostlyclean-compile \ +distclean-compile clean-compile maintainer-clean-compile \ +mostlyclean-libtool distclean-libtool clean-libtool \ +maintainer-clean-libtool mostlyclean-noinstPROGRAMS \ +distclean-noinstPROGRAMS clean-noinstPROGRAMS \ +maintainer-clean-noinstPROGRAMS install-man3 uninstall-man3 install-man \ +uninstall-man uninstall-tse3hHEADERS install-tse3hHEADERS \ +install-data-recursive uninstall-data-recursive install-exec-recursive \ +uninstall-exec-recursive installdirs-recursive uninstalldirs-recursive \ +all-recursive check-recursive installcheck-recursive info-recursive \ +dvi-recursive mostlyclean-recursive distclean-recursive clean-recursive \ +maintainer-clean-recursive tags tags-recursive mostlyclean-tags \ +distclean-tags clean-tags maintainer-clean-tags distdir \ +mostlyclean-depend distclean-depend clean-depend \ +maintainer-clean-depend info-am info dvi-am dvi check check-am \ +installcheck-am installcheck install-exec-am install-exec \ +install-data-am install-data install-am install uninstall-am uninstall \ +all-redirect all-am all installdirs-am installdirs mostlyclean-generic \ +distclean-generic clean-generic maintainer-clean-generic clean \ +mostlyclean distclean maintainer-clean tse3-kdoc-all: tse3-kdoc tse3-kdoc-libs @@ -661,6 +631,7 @@ i/%.i: %.cpp @mkdir -p i gcc -E -C $(CXXFLAGS) $(INCLUDES) $< > $@ + # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: --- tse3-0.2.7.orig/src/tse3/app/Makefile.in +++ tse3-0.2.7/src/tse3/app/Makefile.in @@ -1,8 +1,6 @@ -# Makefile.in generated by automake 1.6.3 from Makefile.am. -# @configure_input@ +# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am -# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 -# Free Software Foundation, Inc. +# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. @@ -12,7 +10,7 @@ # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. -@SET_MAKE@ + SHELL = @SHELL@ srcdir = @srcdir@ @@ -33,9 +31,13 @@ mandir = @mandir@ includedir = @includedir@ oldincludedir = /usr/include + +DESTDIR = + pkgdatadir = $(datadir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ + top_builddir = ../../.. ACLOCAL = @ACLOCAL@ @@ -43,16 +45,12 @@ AUTOMAKE = @AUTOMAKE@ AUTOHEADER = @AUTOHEADER@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd INSTALL = @INSTALL@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS) INSTALL_DATA = @INSTALL_DATA@ -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_HEADER = $(INSTALL_DATA) transform = @program_transform_name@ + NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : @@ -61,29 +59,34 @@ POST_UNINSTALL = : host_alias = @host_alias@ host_triplet = @host@ - -EXEEXT = @EXEEXT@ -OBJEXT = @OBJEXT@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -AMTAR = @AMTAR@ +AR = @AR@ AS = @AS@ -AWK = @AWK@ CC = @CC@ CPP = @CPP@ CPP_MM = @CPP_MM@ CXX = @CXX@ -DEPDIR = @DEPDIR@ +CXXCPP = @CXXCPP@ DLLTOOL = @DLLTOOL@ ECHO = @ECHO@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +EGREP = @EGREP@ +EXEEXT = @EXEEXT@ +F77 = @F77@ +GCJ = @GCJ@ +GCJFLAGS = @GCJFLAGS@ +HAVE_LIB = @HAVE_LIB@ +LIB = @LIB@ LIBARTS = @LIBARTS@ LIBASOUND = @LIBASOUND@ LIBTOOL = @LIBTOOL@ LIBTOOL_DEPS = @LIBTOOL_DEPS@ LN_S = @LN_S@ +LTLIB = @LTLIB@ +MAKEINFO = @MAKEINFO@ OBJDUMP = @OBJDUMP@ +OBJEXT = @OBJEXT@ PACKAGE = @PACKAGE@ RANLIB = @RANLIB@ +RC = @RC@ STRIP = @STRIP@ TSE3_ALSA_PREFIX = @TSE3_ALSA_PREFIX@ TSE3_ALSA_VERSION = @TSE3_ALSA_VERSION@ @@ -95,9 +98,7 @@ TSE3_WITH_OSS = @TSE3_WITH_OSS@ TSE3_WITH_WIN32 = @TSE3_WITH_WIN32@ VERSION = @VERSION@ -am__include = @am__include@ -am__quote = @am__quote@ -install_sh = @install_sh@ + tse3apph_HEADERS = Application.h Choices.h Modified.h PartSelection.h PartDisplay.h Record.h TrackSelection.h tse3apphdir = $(pkgincludedir)/app @@ -107,102 +108,87 @@ DISTCLEANFILES = ./.deps/* ./.deps/.P INCLUDES = -I$(top_srcdir)/src -subdir = src/tse3/app mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = -LTLIBRARIES = $(noinst_LTLIBRARIES) - -libtse3app_la_LDFLAGS = -libtse3app_la_LIBADD = -am_libtse3app_la_OBJECTS = Application.lo Choices.lo Modified.lo \ - PartSelection.lo PartDisplay.lo Record.lo TrackSelection.lo -libtse3app_la_OBJECTS = $(am_libtse3app_la_OBJECTS) +CONFIG_HEADER = ../../../config.h +CONFIG_CLEAN_FILES = +LTLIBRARIES = $(noinst_LTLIBRARIES) + -DEFS = @DEFS@ -DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir) +DEFS = @DEFS@ -I. -I$(srcdir) -I../../.. CPPFLAGS = @CPPFLAGS@ LDFLAGS = @LDFLAGS@ LIBS = @LIBS@ -depcomp = $(SHELL) $(top_srcdir)/depcomp -am__depfiles_maybe = depfiles -@AMDEP_TRUE@DEP_FILES = ./$(DEPDIR)/Application.Plo \ -@AMDEP_TRUE@ ./$(DEPDIR)/Choices.Plo ./$(DEPDIR)/Modified.Plo \ -@AMDEP_TRUE@ ./$(DEPDIR)/PartDisplay.Plo \ -@AMDEP_TRUE@ ./$(DEPDIR)/PartSelection.Plo \ -@AMDEP_TRUE@ ./$(DEPDIR)/Record.Plo \ -@AMDEP_TRUE@ ./$(DEPDIR)/TrackSelection.Plo -CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ - $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -LTCXXCOMPILE = $(LIBTOOL) --mode=compile $(CXX) $(DEFS) \ - $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ - $(AM_CXXFLAGS) $(CXXFLAGS) -CXXLD = $(CXX) -CXXLINK = $(LIBTOOL) --mode=link $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) \ - $(AM_LDFLAGS) $(LDFLAGS) -o $@ +libtse3app_la_LDFLAGS = +libtse3app_la_LIBADD = +libtse3app_la_OBJECTS = Application.lo Choices.lo Modified.lo \ +PartSelection.lo PartDisplay.lo Record.lo TrackSelection.lo CXXFLAGS = @CXXFLAGS@ -DIST_SOURCES = $(libtse3app_la_SOURCES) -HEADERS = $(tse3apph_HEADERS) +CXXCOMPILE = $(CXX) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) +LTCXXCOMPILE = $(LIBTOOL) --mode=compile $(CXX) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) +CXXLD = $(CXX) +CXXLINK = $(LIBTOOL) --mode=link $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) $(LDFLAGS) -o $@ +HEADERS = $(tse3apph_HEADERS) -DIST_COMMON = $(tse3apph_HEADERS) Makefile.am Makefile.in -SOURCES = $(libtse3app_la_SOURCES) +DIST_COMMON = Makefile.am Makefile.in -all: all-am +DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) + +TAR = tar +GZIP_ENV = --best +DEP_FILES = .deps/Application.P .deps/Choices.P .deps/Modified.P \ +.deps/PartDisplay.P .deps/PartSelection.P .deps/Record.P \ +.deps/TrackSelection.P +SOURCES = $(libtse3app_la_SOURCES) +OBJECTS = $(libtse3app_la_OBJECTS) + +all: all-redirect .SUFFIXES: -.SUFFIXES: .cpp .lo .o .obj -$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) - cd $(top_srcdir) && \ - $(AUTOMAKE) --gnu src/tse3/app/Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe) +.SUFFIXES: .S .c .cpp .lo .o .obj .s +$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) + cd $(top_srcdir) && $(AUTOMAKE) --gnu src/tse3/app/Makefile + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES) + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status + + +mostlyclean-noinstLTLIBRARIES: clean-noinstLTLIBRARIES: -test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES) - @list='$(noinst_LTLIBRARIES)'; for p in $$list; do \ - dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \ - test -z "$dir" && dir=.; \ - echo "rm -f \"$${dir}/so_locations\""; \ - rm -f "$${dir}/so_locations"; \ - done -libtse3app.la: $(libtse3app_la_OBJECTS) $(libtse3app_la_DEPENDENCIES) - $(CXXLINK) $(libtse3app_la_LDFLAGS) $(libtse3app_la_OBJECTS) $(libtse3app_la_LIBADD) $(LIBS) + +distclean-noinstLTLIBRARIES: + +maintainer-clean-noinstLTLIBRARIES: + +# FIXME: We should only use cygpath when building on Windows, +# and only if it is available. +.c.obj: + $(COMPILE) -c `cygpath -w $<` + +.s.o: + $(COMPILE) -c $< + +.S.o: + $(COMPILE) -c $< mostlyclean-compile: - -rm -f *.$(OBJEXT) core *.core + -rm -f *.o core *.core + -rm -f *.$(OBJEXT) + +clean-compile: distclean-compile: -rm -f *.tab.c -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/Application.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/Choices.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/Modified.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/PartDisplay.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/PartSelection.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/Record.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/TrackSelection.Plo@am__quote@ - -distclean-depend: - -rm -rf ./$(DEPDIR) +maintainer-clean-compile: -.cpp.o: -@AMDEP_TRUE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@ -@AMDEP_TRUE@ $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - $(CXXCOMPILE) -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$< - -.cpp.obj: -@AMDEP_TRUE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@ -@AMDEP_TRUE@ $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - $(CXXCOMPILE) -c -o $@ `cygpath -w $<` +.s.lo: + $(LIBTOOL) --mode=compile $(COMPILE) -c $< -.cpp.lo: -@AMDEP_TRUE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ -@AMDEP_TRUE@ depfile='$(DEPDIR)/$*.Plo' tmpdepfile='$(DEPDIR)/$*.TPlo' @AMDEPBACKSLASH@ -@AMDEP_TRUE@ $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - $(LTCXXCOMPILE) -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$< -CXXDEPMODE = @CXXDEPMODE@ +.S.lo: + $(LIBTOOL) --mode=compile $(COMPILE) -c $< mostlyclean-libtool: -rm -f *.lo @@ -211,176 +197,217 @@ -rm -rf .libs _libs distclean-libtool: - -rm -f libtool -uninstall-info-am: -tse3apphHEADERS_INSTALL = $(INSTALL_HEADER) + +maintainer-clean-libtool: + +libtse3app.la: $(libtse3app_la_OBJECTS) $(libtse3app_la_DEPENDENCIES) + $(CXXLINK) $(libtse3app_la_LDFLAGS) $(libtse3app_la_OBJECTS) $(libtse3app_la_LIBADD) $(LIBS) +.cpp.o: + $(CXXCOMPILE) -c $< +.cpp.obj: + $(CXXCOMPILE) -c `cygpath -w $<` +.cpp.lo: + $(LTCXXCOMPILE) -c $< + install-tse3apphHEADERS: $(tse3apph_HEADERS) @$(NORMAL_INSTALL) $(mkinstalldirs) $(DESTDIR)$(tse3apphdir) @list='$(tse3apph_HEADERS)'; for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - f="`echo $$p | sed -e 's|^.*/||'`"; \ - echo " $(tse3apphHEADERS_INSTALL) $$d$$p $(DESTDIR)$(tse3apphdir)/$$f"; \ - $(tse3apphHEADERS_INSTALL) $$d$$p $(DESTDIR)$(tse3apphdir)/$$f; \ + if test -f "$$p"; then d= ; else d="$(srcdir)/"; fi; \ + echo " $(INSTALL_DATA) $$d$$p $(DESTDIR)$(tse3apphdir)/$$p"; \ + $(INSTALL_DATA) $$d$$p $(DESTDIR)$(tse3apphdir)/$$p; \ done uninstall-tse3apphHEADERS: @$(NORMAL_UNINSTALL) - @list='$(tse3apph_HEADERS)'; for p in $$list; do \ - f="`echo $$p | sed -e 's|^.*/||'`"; \ - echo " rm -f $(DESTDIR)$(tse3apphdir)/$$f"; \ - rm -f $(DESTDIR)$(tse3apphdir)/$$f; \ + list='$(tse3apph_HEADERS)'; for p in $$list; do \ + rm -f $(DESTDIR)$(tse3apphdir)/$$p; \ done -ETAGS = etags -ETAGSFLAGS = - tags: TAGS -ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ +ID: $(HEADERS) $(SOURCES) $(LISP) + list='$(SOURCES) $(HEADERS)'; \ + unique=`for i in $$list; do echo $$i; done | \ + awk ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ - mkid -fID $$unique + here=`pwd` && cd $(srcdir) \ + && mkid -f$$here/ID $$unique $(LISP) -TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) +TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP) tags=; \ here=`pwd`; \ - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ + list='$(SOURCES) $(HEADERS)'; \ + unique=`for i in $$list; do echo $$i; done | \ + awk ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ - test -z "$(ETAGS_ARGS)$$tags$$unique" \ - || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$tags $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && cd $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) $$here + test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \ + || (cd $(srcdir) && etags -o $$here/TAGS $(ETAGS_ARGS) $$tags $$unique $(LISP)) + +mostlyclean-tags: + +clean-tags: distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) + -rm -f TAGS ID + +maintainer-clean-tags: -top_distdir = ../../.. -distdir = $(top_distdir)/$(PACKAGE)-$(VERSION) +distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir) + +subdir = src/tse3/app distdir: $(DISTFILES) - @list='$(DISTFILES)'; for file in $$list; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test "$$dir" != "$$file" && test "$$dir" != "."; then \ - dir="/$$dir"; \ - $(mkinstalldirs) "$(distdir)$$dir"; \ - else \ - dir=''; \ - fi; \ + here=`cd $(top_builddir) && pwd`; \ + top_distdir=`cd $(top_distdir) && pwd`; \ + distdir=`cd $(distdir) && pwd`; \ + cd $(top_srcdir) \ + && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu src/tse3/app/Makefile + @for file in $(DISTFILES); do \ + d=$(srcdir); \ if test -d $$d/$$file; then \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ - fi; \ - cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + cp -pr $$d/$$file $(distdir)/$$file; \ else \ test -f $(distdir)/$$file \ - || cp -p $$d/$$file $(distdir)/$$file \ - || exit 1; \ + || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ + || cp -p $$d/$$file $(distdir)/$$file || :; \ fi; \ done -check-am: all-am -check: check-am -all-am: Makefile $(LTLIBRARIES) $(HEADERS) -installdirs: - $(mkinstalldirs) $(DESTDIR)$(tse3apphdir) +DEPS_MAGIC := $(shell mkdir .deps > /dev/null 2>&1 || :) -install: install-am +-include $(DEP_FILES) + +mostlyclean-depend: + +clean-depend: + +distclean-depend: + -rm -rf .deps + +maintainer-clean-depend: + +%.o: %.c + @echo '$(COMPILE) -c $<'; \ + $(COMPILE) -Wp,-MD,.deps/$(*F).pp -c $< + @-cp .deps/$(*F).pp .deps/$(*F).P; \ + tr ' ' '\012' < .deps/$(*F).pp \ + | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \ + >> .deps/$(*F).P; \ + rm .deps/$(*F).pp + +%.lo: %.c + @echo '$(LTCOMPILE) -c $<'; \ + $(LTCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $< + @-sed -e 's/^\([^:]*\)\.o[ ]*:/\1.lo \1.o :/' \ + < .deps/$(*F).pp > .deps/$(*F).P; \ + tr ' ' '\012' < .deps/$(*F).pp \ + | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \ + >> .deps/$(*F).P; \ + rm -f .deps/$(*F).pp + +%.o: %.cpp + @echo '$(CXXCOMPILE) -c $<'; \ + $(CXXCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $< + @-cp .deps/$(*F).pp .deps/$(*F).P; \ + tr ' ' '\012' < .deps/$(*F).pp \ + | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \ + >> .deps/$(*F).P; \ + rm .deps/$(*F).pp + +%.lo: %.cpp + @echo '$(LTCXXCOMPILE) -c $<'; \ + $(LTCXXCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $< + @-sed -e 's/^\([^:]*\)\.o[ ]*:/\1.lo \1.o :/' \ + < .deps/$(*F).pp > .deps/$(*F).P; \ + tr ' ' '\012' < .deps/$(*F).pp \ + | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \ + >> .deps/$(*F).P; \ + rm -f .deps/$(*F).pp +info-am: +info: info-am +dvi-am: +dvi: dvi-am +check-am: all-am +check: check-am +installcheck-am: +installcheck: installcheck-am +install-exec-am: install-exec: install-exec-am + +install-data-am: install-tse3apphHEADERS install-data: install-data-am -uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am +install: install-am +uninstall-am: uninstall-tse3apphHEADERS +uninstall: uninstall-am +all-am: Makefile $(LTLIBRARIES) $(HEADERS) +all-redirect: all-am install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install + $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install +installdirs: + $(mkinstalldirs) $(DESTDIR)$(tse3apphdir) + + mostlyclean-generic: clean-generic: distclean-generic: -rm -f Makefile $(CONFIG_CLEAN_FILES) + -rm -f config.cache config.log stamp-h stamp-h[0-9]* -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES) maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-am - -clean-am: clean-generic clean-libtool clean-noinstLTLIBRARIES \ - mostlyclean-am - -distclean: distclean-am - -distclean-am: clean-am distclean-compile distclean-depend \ - distclean-generic distclean-libtool distclean-tags +mostlyclean-am: mostlyclean-noinstLTLIBRARIES mostlyclean-compile \ + mostlyclean-libtool mostlyclean-tags mostlyclean-depend \ + mostlyclean-generic -dvi: dvi-am - -dvi-am: - -info: info-am - -info-am: +mostlyclean: mostlyclean-am -install-data-am: install-tse3apphHEADERS +clean-am: clean-noinstLTLIBRARIES clean-compile clean-libtool \ + clean-tags clean-depend clean-generic mostlyclean-am -install-exec-am: +clean: clean-am -install-info: install-info-am +distclean-am: distclean-noinstLTLIBRARIES distclean-compile \ + distclean-libtool distclean-tags distclean-depend \ + distclean-generic clean-am + -rm -f libtool -install-man: +distclean: distclean-am -installcheck-am: +maintainer-clean-am: maintainer-clean-noinstLTLIBRARIES \ + maintainer-clean-compile maintainer-clean-libtool \ + maintainer-clean-tags maintainer-clean-depend \ + maintainer-clean-generic distclean-am + @echo "This command is intended for maintainers to use;" + @echo "it deletes files that may require special tools to rebuild." maintainer-clean: maintainer-clean-am -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-compile mostlyclean-generic \ - mostlyclean-libtool - -uninstall-am: uninstall-info-am uninstall-tse3apphHEADERS - -.PHONY: GTAGS all all-am check check-am clean clean-generic \ - clean-libtool clean-noinstLTLIBRARIES distclean \ - distclean-compile distclean-depend distclean-generic \ - distclean-libtool distclean-tags distdir dvi dvi-am info \ - info-am install install-am install-data install-data-am \ - install-exec install-exec-am install-info install-info-am \ - install-man install-strip install-tse3apphHEADERS installcheck \ - installcheck-am installdirs maintainer-clean \ - maintainer-clean-generic mostlyclean mostlyclean-compile \ - mostlyclean-generic mostlyclean-libtool tags uninstall \ - uninstall-am uninstall-info-am uninstall-tse3apphHEADERS +.PHONY: mostlyclean-noinstLTLIBRARIES distclean-noinstLTLIBRARIES \ +clean-noinstLTLIBRARIES maintainer-clean-noinstLTLIBRARIES \ +mostlyclean-compile distclean-compile clean-compile \ +maintainer-clean-compile mostlyclean-libtool distclean-libtool \ +clean-libtool maintainer-clean-libtool uninstall-tse3apphHEADERS \ +install-tse3apphHEADERS tags mostlyclean-tags distclean-tags clean-tags \ +maintainer-clean-tags distdir mostlyclean-depend distclean-depend \ +clean-depend maintainer-clean-depend info-am info dvi-am dvi check \ +check-am installcheck-am installcheck install-exec-am install-exec \ +install-data-am install-data install-am install uninstall-am uninstall \ +all-redirect all-am all installdirs mostlyclean-generic \ +distclean-generic clean-generic maintainer-clean-generic clean \ +mostlyclean distclean maintainer-clean #noinst_PROGRAMS = test #test_SOURCES = test.cpp #test_LDFLAGS = -L$(top_builddir)/src/tse3 -L$(top_builddir)/src/tse3/platform -L$(top_builddir)/src/tse3/application #test_LDADD = -ltse3 -ltse3_OSS -ltse3_application + # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: --- tse3-0.2.7.orig/src/tse3/cmd/Makefile.in +++ tse3-0.2.7/src/tse3/cmd/Makefile.in @@ -1,8 +1,6 @@ -# Makefile.in generated by automake 1.6.3 from Makefile.am. -# @configure_input@ +# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am -# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 -# Free Software Foundation, Inc. +# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. @@ -12,7 +10,7 @@ # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. -@SET_MAKE@ + SHELL = @SHELL@ srcdir = @srcdir@ @@ -33,9 +31,13 @@ mandir = @mandir@ includedir = @includedir@ oldincludedir = /usr/include + +DESTDIR = + pkgdatadir = $(datadir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ + top_builddir = ../../.. ACLOCAL = @ACLOCAL@ @@ -43,16 +45,12 @@ AUTOMAKE = @AUTOMAKE@ AUTOHEADER = @AUTOHEADER@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd INSTALL = @INSTALL@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS) INSTALL_DATA = @INSTALL_DATA@ -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_HEADER = $(INSTALL_DATA) transform = @program_transform_name@ + NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : @@ -61,29 +59,34 @@ POST_UNINSTALL = : host_alias = @host_alias@ host_triplet = @host@ - -EXEEXT = @EXEEXT@ -OBJEXT = @OBJEXT@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -AMTAR = @AMTAR@ +AR = @AR@ AS = @AS@ -AWK = @AWK@ CC = @CC@ CPP = @CPP@ CPP_MM = @CPP_MM@ CXX = @CXX@ -DEPDIR = @DEPDIR@ +CXXCPP = @CXXCPP@ DLLTOOL = @DLLTOOL@ ECHO = @ECHO@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +EGREP = @EGREP@ +EXEEXT = @EXEEXT@ +F77 = @F77@ +GCJ = @GCJ@ +GCJFLAGS = @GCJFLAGS@ +HAVE_LIB = @HAVE_LIB@ +LIB = @LIB@ LIBARTS = @LIBARTS@ LIBASOUND = @LIBASOUND@ LIBTOOL = @LIBTOOL@ LIBTOOL_DEPS = @LIBTOOL_DEPS@ LN_S = @LN_S@ +LTLIB = @LTLIB@ +MAKEINFO = @MAKEINFO@ OBJDUMP = @OBJDUMP@ +OBJEXT = @OBJEXT@ PACKAGE = @PACKAGE@ RANLIB = @RANLIB@ +RC = @RC@ STRIP = @STRIP@ TSE3_ALSA_PREFIX = @TSE3_ALSA_PREFIX@ TSE3_ALSA_VERSION = @TSE3_ALSA_VERSION@ @@ -95,9 +98,7 @@ TSE3_WITH_OSS = @TSE3_WITH_OSS@ TSE3_WITH_WIN32 = @TSE3_WITH_WIN32@ VERSION = @VERSION@ -am__include = @am__include@ -am__quote = @am__quote@ -install_sh = @install_sh@ + tse3comh_HEADERS = Command.h CommandGroup.h CommandHistory.h FlagTrack.h Song.h Track.h Part.h Phrase.h tse3comhdir = $(pkgincludedir)/cmd @@ -107,101 +108,87 @@ DISTCLEANFILES = ./.deps/* ./.deps/.P INCLUDES = -I$(top_srcdir)/src -subdir = src/tse3/cmd mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = -LTLIBRARIES = $(noinst_LTLIBRARIES) - -libtse3cmd_la_LDFLAGS = -libtse3cmd_la_LIBADD = -am_libtse3cmd_la_OBJECTS = CommandGroup.lo CommandHistory.lo \ - FlagTrack.lo Song.lo Track.lo Part.lo Phrase.lo -libtse3cmd_la_OBJECTS = $(am_libtse3cmd_la_OBJECTS) +CONFIG_HEADER = ../../../config.h +CONFIG_CLEAN_FILES = +LTLIBRARIES = $(noinst_LTLIBRARIES) + -DEFS = @DEFS@ -DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir) +DEFS = @DEFS@ -I. -I$(srcdir) -I../../.. CPPFLAGS = @CPPFLAGS@ LDFLAGS = @LDFLAGS@ LIBS = @LIBS@ -depcomp = $(SHELL) $(top_srcdir)/depcomp -am__depfiles_maybe = depfiles -@AMDEP_TRUE@DEP_FILES = ./$(DEPDIR)/CommandGroup.Plo \ -@AMDEP_TRUE@ ./$(DEPDIR)/CommandHistory.Plo \ -@AMDEP_TRUE@ ./$(DEPDIR)/FlagTrack.Plo ./$(DEPDIR)/Part.Plo \ -@AMDEP_TRUE@ ./$(DEPDIR)/Phrase.Plo ./$(DEPDIR)/Song.Plo \ -@AMDEP_TRUE@ ./$(DEPDIR)/Track.Plo -CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ - $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -LTCXXCOMPILE = $(LIBTOOL) --mode=compile $(CXX) $(DEFS) \ - $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ - $(AM_CXXFLAGS) $(CXXFLAGS) -CXXLD = $(CXX) -CXXLINK = $(LIBTOOL) --mode=link $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) \ - $(AM_LDFLAGS) $(LDFLAGS) -o $@ +libtse3cmd_la_LDFLAGS = +libtse3cmd_la_LIBADD = +libtse3cmd_la_OBJECTS = CommandGroup.lo CommandHistory.lo FlagTrack.lo \ +Song.lo Track.lo Part.lo Phrase.lo CXXFLAGS = @CXXFLAGS@ -DIST_SOURCES = $(libtse3cmd_la_SOURCES) -HEADERS = $(tse3comh_HEADERS) +CXXCOMPILE = $(CXX) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) +LTCXXCOMPILE = $(LIBTOOL) --mode=compile $(CXX) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) +CXXLD = $(CXX) +CXXLINK = $(LIBTOOL) --mode=link $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) $(LDFLAGS) -o $@ +HEADERS = $(tse3comh_HEADERS) -DIST_COMMON = $(tse3comh_HEADERS) Makefile.am Makefile.in -SOURCES = $(libtse3cmd_la_SOURCES) +DIST_COMMON = Makefile.am Makefile.in -all: all-am +DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) + +TAR = tar +GZIP_ENV = --best +DEP_FILES = .deps/CommandGroup.P .deps/CommandHistory.P \ +.deps/FlagTrack.P .deps/Part.P .deps/Phrase.P .deps/Song.P \ +.deps/Track.P +SOURCES = $(libtse3cmd_la_SOURCES) +OBJECTS = $(libtse3cmd_la_OBJECTS) + +all: all-redirect .SUFFIXES: -.SUFFIXES: .cpp .lo .o .obj -$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) - cd $(top_srcdir) && \ - $(AUTOMAKE) --gnu src/tse3/cmd/Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe) +.SUFFIXES: .S .c .cpp .lo .o .obj .s +$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) + cd $(top_srcdir) && $(AUTOMAKE) --gnu src/tse3/cmd/Makefile + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES) + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status + + +mostlyclean-noinstLTLIBRARIES: clean-noinstLTLIBRARIES: -test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES) - @list='$(noinst_LTLIBRARIES)'; for p in $$list; do \ - dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \ - test -z "$dir" && dir=.; \ - echo "rm -f \"$${dir}/so_locations\""; \ - rm -f "$${dir}/so_locations"; \ - done -libtse3cmd.la: $(libtse3cmd_la_OBJECTS) $(libtse3cmd_la_DEPENDENCIES) - $(CXXLINK) $(libtse3cmd_la_LDFLAGS) $(libtse3cmd_la_OBJECTS) $(libtse3cmd_la_LIBADD) $(LIBS) + +distclean-noinstLTLIBRARIES: + +maintainer-clean-noinstLTLIBRARIES: + +# FIXME: We should only use cygpath when building on Windows, +# and only if it is available. +.c.obj: + $(COMPILE) -c `cygpath -w $<` + +.s.o: + $(COMPILE) -c $< + +.S.o: + $(COMPILE) -c $< mostlyclean-compile: - -rm -f *.$(OBJEXT) core *.core + -rm -f *.o core *.core + -rm -f *.$(OBJEXT) + +clean-compile: distclean-compile: -rm -f *.tab.c -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/CommandGroup.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/CommandHistory.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/FlagTrack.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/Part.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/Phrase.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/Song.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/Track.Plo@am__quote@ - -distclean-depend: - -rm -rf ./$(DEPDIR) +maintainer-clean-compile: -.cpp.o: -@AMDEP_TRUE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@ -@AMDEP_TRUE@ $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - $(CXXCOMPILE) -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$< - -.cpp.obj: -@AMDEP_TRUE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@ -@AMDEP_TRUE@ $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - $(CXXCOMPILE) -c -o $@ `cygpath -w $<` +.s.lo: + $(LIBTOOL) --mode=compile $(COMPILE) -c $< -.cpp.lo: -@AMDEP_TRUE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ -@AMDEP_TRUE@ depfile='$(DEPDIR)/$*.Plo' tmpdepfile='$(DEPDIR)/$*.TPlo' @AMDEPBACKSLASH@ -@AMDEP_TRUE@ $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - $(LTCXXCOMPILE) -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$< -CXXDEPMODE = @CXXDEPMODE@ +.S.lo: + $(LIBTOOL) --mode=compile $(COMPILE) -c $< mostlyclean-libtool: -rm -f *.lo @@ -210,176 +197,217 @@ -rm -rf .libs _libs distclean-libtool: - -rm -f libtool -uninstall-info-am: -tse3comhHEADERS_INSTALL = $(INSTALL_HEADER) + +maintainer-clean-libtool: + +libtse3cmd.la: $(libtse3cmd_la_OBJECTS) $(libtse3cmd_la_DEPENDENCIES) + $(CXXLINK) $(libtse3cmd_la_LDFLAGS) $(libtse3cmd_la_OBJECTS) $(libtse3cmd_la_LIBADD) $(LIBS) +.cpp.o: + $(CXXCOMPILE) -c $< +.cpp.obj: + $(CXXCOMPILE) -c `cygpath -w $<` +.cpp.lo: + $(LTCXXCOMPILE) -c $< + install-tse3comhHEADERS: $(tse3comh_HEADERS) @$(NORMAL_INSTALL) $(mkinstalldirs) $(DESTDIR)$(tse3comhdir) @list='$(tse3comh_HEADERS)'; for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - f="`echo $$p | sed -e 's|^.*/||'`"; \ - echo " $(tse3comhHEADERS_INSTALL) $$d$$p $(DESTDIR)$(tse3comhdir)/$$f"; \ - $(tse3comhHEADERS_INSTALL) $$d$$p $(DESTDIR)$(tse3comhdir)/$$f; \ + if test -f "$$p"; then d= ; else d="$(srcdir)/"; fi; \ + echo " $(INSTALL_DATA) $$d$$p $(DESTDIR)$(tse3comhdir)/$$p"; \ + $(INSTALL_DATA) $$d$$p $(DESTDIR)$(tse3comhdir)/$$p; \ done uninstall-tse3comhHEADERS: @$(NORMAL_UNINSTALL) - @list='$(tse3comh_HEADERS)'; for p in $$list; do \ - f="`echo $$p | sed -e 's|^.*/||'`"; \ - echo " rm -f $(DESTDIR)$(tse3comhdir)/$$f"; \ - rm -f $(DESTDIR)$(tse3comhdir)/$$f; \ + list='$(tse3comh_HEADERS)'; for p in $$list; do \ + rm -f $(DESTDIR)$(tse3comhdir)/$$p; \ done -ETAGS = etags -ETAGSFLAGS = - tags: TAGS -ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ +ID: $(HEADERS) $(SOURCES) $(LISP) + list='$(SOURCES) $(HEADERS)'; \ + unique=`for i in $$list; do echo $$i; done | \ + awk ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ - mkid -fID $$unique + here=`pwd` && cd $(srcdir) \ + && mkid -f$$here/ID $$unique $(LISP) -TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) +TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP) tags=; \ here=`pwd`; \ - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ + list='$(SOURCES) $(HEADERS)'; \ + unique=`for i in $$list; do echo $$i; done | \ + awk ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ - test -z "$(ETAGS_ARGS)$$tags$$unique" \ - || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$tags $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && cd $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) $$here + test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \ + || (cd $(srcdir) && etags -o $$here/TAGS $(ETAGS_ARGS) $$tags $$unique $(LISP)) + +mostlyclean-tags: + +clean-tags: distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) + -rm -f TAGS ID + +maintainer-clean-tags: -top_distdir = ../../.. -distdir = $(top_distdir)/$(PACKAGE)-$(VERSION) +distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir) + +subdir = src/tse3/cmd distdir: $(DISTFILES) - @list='$(DISTFILES)'; for file in $$list; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test "$$dir" != "$$file" && test "$$dir" != "."; then \ - dir="/$$dir"; \ - $(mkinstalldirs) "$(distdir)$$dir"; \ - else \ - dir=''; \ - fi; \ + here=`cd $(top_builddir) && pwd`; \ + top_distdir=`cd $(top_distdir) && pwd`; \ + distdir=`cd $(distdir) && pwd`; \ + cd $(top_srcdir) \ + && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu src/tse3/cmd/Makefile + @for file in $(DISTFILES); do \ + d=$(srcdir); \ if test -d $$d/$$file; then \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ - fi; \ - cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + cp -pr $$d/$$file $(distdir)/$$file; \ else \ test -f $(distdir)/$$file \ - || cp -p $$d/$$file $(distdir)/$$file \ - || exit 1; \ + || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ + || cp -p $$d/$$file $(distdir)/$$file || :; \ fi; \ done -check-am: all-am -check: check-am -all-am: Makefile $(LTLIBRARIES) $(HEADERS) -installdirs: - $(mkinstalldirs) $(DESTDIR)$(tse3comhdir) +DEPS_MAGIC := $(shell mkdir .deps > /dev/null 2>&1 || :) -install: install-am +-include $(DEP_FILES) + +mostlyclean-depend: + +clean-depend: + +distclean-depend: + -rm -rf .deps + +maintainer-clean-depend: + +%.o: %.c + @echo '$(COMPILE) -c $<'; \ + $(COMPILE) -Wp,-MD,.deps/$(*F).pp -c $< + @-cp .deps/$(*F).pp .deps/$(*F).P; \ + tr ' ' '\012' < .deps/$(*F).pp \ + | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \ + >> .deps/$(*F).P; \ + rm .deps/$(*F).pp + +%.lo: %.c + @echo '$(LTCOMPILE) -c $<'; \ + $(LTCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $< + @-sed -e 's/^\([^:]*\)\.o[ ]*:/\1.lo \1.o :/' \ + < .deps/$(*F).pp > .deps/$(*F).P; \ + tr ' ' '\012' < .deps/$(*F).pp \ + | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \ + >> .deps/$(*F).P; \ + rm -f .deps/$(*F).pp + +%.o: %.cpp + @echo '$(CXXCOMPILE) -c $<'; \ + $(CXXCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $< + @-cp .deps/$(*F).pp .deps/$(*F).P; \ + tr ' ' '\012' < .deps/$(*F).pp \ + | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \ + >> .deps/$(*F).P; \ + rm .deps/$(*F).pp + +%.lo: %.cpp + @echo '$(LTCXXCOMPILE) -c $<'; \ + $(LTCXXCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $< + @-sed -e 's/^\([^:]*\)\.o[ ]*:/\1.lo \1.o :/' \ + < .deps/$(*F).pp > .deps/$(*F).P; \ + tr ' ' '\012' < .deps/$(*F).pp \ + | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \ + >> .deps/$(*F).P; \ + rm -f .deps/$(*F).pp +info-am: +info: info-am +dvi-am: +dvi: dvi-am +check-am: all-am +check: check-am +installcheck-am: +installcheck: installcheck-am +install-exec-am: install-exec: install-exec-am + +install-data-am: install-tse3comhHEADERS install-data: install-data-am -uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am +install: install-am +uninstall-am: uninstall-tse3comhHEADERS +uninstall: uninstall-am +all-am: Makefile $(LTLIBRARIES) $(HEADERS) +all-redirect: all-am install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install + $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install +installdirs: + $(mkinstalldirs) $(DESTDIR)$(tse3comhdir) + + mostlyclean-generic: clean-generic: distclean-generic: -rm -f Makefile $(CONFIG_CLEAN_FILES) + -rm -f config.cache config.log stamp-h stamp-h[0-9]* -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES) maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-am - -clean-am: clean-generic clean-libtool clean-noinstLTLIBRARIES \ - mostlyclean-am - -distclean: distclean-am - -distclean-am: clean-am distclean-compile distclean-depend \ - distclean-generic distclean-libtool distclean-tags +mostlyclean-am: mostlyclean-noinstLTLIBRARIES mostlyclean-compile \ + mostlyclean-libtool mostlyclean-tags mostlyclean-depend \ + mostlyclean-generic -dvi: dvi-am - -dvi-am: - -info: info-am - -info-am: +mostlyclean: mostlyclean-am -install-data-am: install-tse3comhHEADERS +clean-am: clean-noinstLTLIBRARIES clean-compile clean-libtool \ + clean-tags clean-depend clean-generic mostlyclean-am -install-exec-am: +clean: clean-am -install-info: install-info-am +distclean-am: distclean-noinstLTLIBRARIES distclean-compile \ + distclean-libtool distclean-tags distclean-depend \ + distclean-generic clean-am + -rm -f libtool -install-man: +distclean: distclean-am -installcheck-am: +maintainer-clean-am: maintainer-clean-noinstLTLIBRARIES \ + maintainer-clean-compile maintainer-clean-libtool \ + maintainer-clean-tags maintainer-clean-depend \ + maintainer-clean-generic distclean-am + @echo "This command is intended for maintainers to use;" + @echo "it deletes files that may require special tools to rebuild." maintainer-clean: maintainer-clean-am -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-compile mostlyclean-generic \ - mostlyclean-libtool - -uninstall-am: uninstall-info-am uninstall-tse3comhHEADERS - -.PHONY: GTAGS all all-am check check-am clean clean-generic \ - clean-libtool clean-noinstLTLIBRARIES distclean \ - distclean-compile distclean-depend distclean-generic \ - distclean-libtool distclean-tags distdir dvi dvi-am info \ - info-am install install-am install-data install-data-am \ - install-exec install-exec-am install-info install-info-am \ - install-man install-strip install-tse3comhHEADERS installcheck \ - installcheck-am installdirs maintainer-clean \ - maintainer-clean-generic mostlyclean mostlyclean-compile \ - mostlyclean-generic mostlyclean-libtool tags uninstall \ - uninstall-am uninstall-info-am uninstall-tse3comhHEADERS +.PHONY: mostlyclean-noinstLTLIBRARIES distclean-noinstLTLIBRARIES \ +clean-noinstLTLIBRARIES maintainer-clean-noinstLTLIBRARIES \ +mostlyclean-compile distclean-compile clean-compile \ +maintainer-clean-compile mostlyclean-libtool distclean-libtool \ +clean-libtool maintainer-clean-libtool uninstall-tse3comhHEADERS \ +install-tse3comhHEADERS tags mostlyclean-tags distclean-tags clean-tags \ +maintainer-clean-tags distdir mostlyclean-depend distclean-depend \ +clean-depend maintainer-clean-depend info-am info dvi-am dvi check \ +check-am installcheck-am installcheck install-exec-am install-exec \ +install-data-am install-data install-am install uninstall-am uninstall \ +all-redirect all-am all installdirs mostlyclean-generic \ +distclean-generic clean-generic maintainer-clean-generic clean \ +mostlyclean distclean maintainer-clean #noinst_PROGRAMS = test #test_SOURCES = test.cpp #test_LDFLAGS = -L$(top_builddir)/src/tse3 -L$(top_builddir)/src/tse3/commands #test_LDADD = -ltse3 -ltse3_commands + # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: --- tse3-0.2.7.orig/src/tse3/file/Makefile.in +++ tse3-0.2.7/src/tse3/file/Makefile.in @@ -1,8 +1,6 @@ -# Makefile.in generated by automake 1.6.3 from Makefile.am. -# @configure_input@ +# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am -# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 -# Free Software Foundation, Inc. +# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. @@ -12,7 +10,7 @@ # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. -@SET_MAKE@ + SHELL = @SHELL@ srcdir = @srcdir@ @@ -33,9 +31,13 @@ mandir = @mandir@ includedir = @includedir@ oldincludedir = /usr/include + +DESTDIR = + pkgdatadir = $(datadir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ + top_builddir = ../../.. ACLOCAL = @ACLOCAL@ @@ -43,16 +45,12 @@ AUTOMAKE = @AUTOMAKE@ AUTOHEADER = @AUTOHEADER@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd INSTALL = @INSTALL@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS) INSTALL_DATA = @INSTALL_DATA@ -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_HEADER = $(INSTALL_DATA) transform = @program_transform_name@ + NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : @@ -61,29 +59,34 @@ POST_UNINSTALL = : host_alias = @host_alias@ host_triplet = @host@ - -EXEEXT = @EXEEXT@ -OBJEXT = @OBJEXT@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -AMTAR = @AMTAR@ +AR = @AR@ AS = @AS@ -AWK = @AWK@ CC = @CC@ CPP = @CPP@ CPP_MM = @CPP_MM@ CXX = @CXX@ -DEPDIR = @DEPDIR@ +CXXCPP = @CXXCPP@ DLLTOOL = @DLLTOOL@ ECHO = @ECHO@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +EGREP = @EGREP@ +EXEEXT = @EXEEXT@ +F77 = @F77@ +GCJ = @GCJ@ +GCJFLAGS = @GCJFLAGS@ +HAVE_LIB = @HAVE_LIB@ +LIB = @LIB@ LIBARTS = @LIBARTS@ LIBASOUND = @LIBASOUND@ LIBTOOL = @LIBTOOL@ LIBTOOL_DEPS = @LIBTOOL_DEPS@ LN_S = @LN_S@ +LTLIB = @LTLIB@ +MAKEINFO = @MAKEINFO@ OBJDUMP = @OBJDUMP@ +OBJEXT = @OBJEXT@ PACKAGE = @PACKAGE@ RANLIB = @RANLIB@ +RC = @RC@ STRIP = @STRIP@ TSE3_ALSA_PREFIX = @TSE3_ALSA_PREFIX@ TSE3_ALSA_VERSION = @TSE3_ALSA_VERSION@ @@ -95,9 +98,7 @@ TSE3_WITH_OSS = @TSE3_WITH_OSS@ TSE3_WITH_WIN32 = @TSE3_WITH_WIN32@ VERSION = @VERSION@ -am__include = @am__include@ -am__quote = @am__quote@ -install_sh = @install_sh@ + tse3fileh_HEADERS = XML.h Write.h tse3filehdir = $(pkgincludedir)/file @@ -107,112 +108,89 @@ DISTCLEANFILES = ./.deps/* ./.deps/.P INCLUDES = -I$(top_srcdir)/src -subdir = src/tse3/file mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = -LTLIBRARIES = $(noinst_LTLIBRARIES) - -libtse3file_la_LDFLAGS = -libtse3file_la_LIBADD = -am_libtse3file_la_OBJECTS = DisplayParams.lo FlagTrack.lo KeySigTrack.lo \ - MidiFilter.lo MidiParams.lo Part.lo PhraseList.lo Song.lo \ - TempoTrack.lo TimeSigTrack.lo Track.lo Write.lo XML.lo -libtse3file_la_OBJECTS = $(am_libtse3file_la_OBJECTS) +CONFIG_HEADER = ../../../config.h +CONFIG_CLEAN_FILES = +LTLIBRARIES = $(noinst_LTLIBRARIES) + -DEFS = @DEFS@ -DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir) +DEFS = @DEFS@ -I. -I$(srcdir) -I../../.. CPPFLAGS = @CPPFLAGS@ LDFLAGS = @LDFLAGS@ LIBS = @LIBS@ -depcomp = $(SHELL) $(top_srcdir)/depcomp -am__depfiles_maybe = depfiles -@AMDEP_TRUE@DEP_FILES = ./$(DEPDIR)/DisplayParams.Plo \ -@AMDEP_TRUE@ ./$(DEPDIR)/FlagTrack.Plo \ -@AMDEP_TRUE@ ./$(DEPDIR)/KeySigTrack.Plo \ -@AMDEP_TRUE@ ./$(DEPDIR)/MidiFilter.Plo \ -@AMDEP_TRUE@ ./$(DEPDIR)/MidiParams.Plo ./$(DEPDIR)/Part.Plo \ -@AMDEP_TRUE@ ./$(DEPDIR)/PhraseList.Plo ./$(DEPDIR)/Song.Plo \ -@AMDEP_TRUE@ ./$(DEPDIR)/TempoTrack.Plo \ -@AMDEP_TRUE@ ./$(DEPDIR)/TimeSigTrack.Plo ./$(DEPDIR)/Track.Plo \ -@AMDEP_TRUE@ ./$(DEPDIR)/Write.Plo ./$(DEPDIR)/XML.Plo -CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ - $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -LTCXXCOMPILE = $(LIBTOOL) --mode=compile $(CXX) $(DEFS) \ - $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ - $(AM_CXXFLAGS) $(CXXFLAGS) -CXXLD = $(CXX) -CXXLINK = $(LIBTOOL) --mode=link $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) \ - $(AM_LDFLAGS) $(LDFLAGS) -o $@ +libtse3file_la_LDFLAGS = +libtse3file_la_LIBADD = +libtse3file_la_OBJECTS = DisplayParams.lo FlagTrack.lo KeySigTrack.lo \ +MidiFilter.lo MidiParams.lo Part.lo PhraseList.lo Song.lo TempoTrack.lo \ +TimeSigTrack.lo Track.lo Write.lo XML.lo CXXFLAGS = @CXXFLAGS@ -DIST_SOURCES = $(libtse3file_la_SOURCES) -HEADERS = $(tse3fileh_HEADERS) +CXXCOMPILE = $(CXX) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) +LTCXXCOMPILE = $(LIBTOOL) --mode=compile $(CXX) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) +CXXLD = $(CXX) +CXXLINK = $(LIBTOOL) --mode=link $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) $(LDFLAGS) -o $@ +HEADERS = $(tse3fileh_HEADERS) -DIST_COMMON = $(tse3fileh_HEADERS) Makefile.am Makefile.in -SOURCES = $(libtse3file_la_SOURCES) +DIST_COMMON = Makefile.am Makefile.in -all: all-am +DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) + +TAR = tar +GZIP_ENV = --best +DEP_FILES = .deps/DisplayParams.P .deps/FlagTrack.P .deps/KeySigTrack.P \ +.deps/MidiFilter.P .deps/MidiParams.P .deps/Part.P .deps/PhraseList.P \ +.deps/Song.P .deps/TempoTrack.P .deps/TimeSigTrack.P .deps/Track.P \ +.deps/Write.P .deps/XML.P +SOURCES = $(libtse3file_la_SOURCES) +OBJECTS = $(libtse3file_la_OBJECTS) + +all: all-redirect .SUFFIXES: -.SUFFIXES: .cpp .lo .o .obj -$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) - cd $(top_srcdir) && \ - $(AUTOMAKE) --gnu src/tse3/file/Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe) +.SUFFIXES: .S .c .cpp .lo .o .obj .s +$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) + cd $(top_srcdir) && $(AUTOMAKE) --gnu src/tse3/file/Makefile + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES) + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status + + +mostlyclean-noinstLTLIBRARIES: clean-noinstLTLIBRARIES: -test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES) - @list='$(noinst_LTLIBRARIES)'; for p in $$list; do \ - dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \ - test -z "$dir" && dir=.; \ - echo "rm -f \"$${dir}/so_locations\""; \ - rm -f "$${dir}/so_locations"; \ - done -libtse3file.la: $(libtse3file_la_OBJECTS) $(libtse3file_la_DEPENDENCIES) - $(CXXLINK) $(libtse3file_la_LDFLAGS) $(libtse3file_la_OBJECTS) $(libtse3file_la_LIBADD) $(LIBS) + +distclean-noinstLTLIBRARIES: + +maintainer-clean-noinstLTLIBRARIES: + +# FIXME: We should only use cygpath when building on Windows, +# and only if it is available. +.c.obj: + $(COMPILE) -c `cygpath -w $<` + +.s.o: + $(COMPILE) -c $< + +.S.o: + $(COMPILE) -c $< mostlyclean-compile: - -rm -f *.$(OBJEXT) core *.core + -rm -f *.o core *.core + -rm -f *.$(OBJEXT) + +clean-compile: distclean-compile: -rm -f *.tab.c -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/DisplayParams.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/FlagTrack.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/KeySigTrack.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/MidiFilter.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/MidiParams.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/Part.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/PhraseList.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/Song.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/TempoTrack.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/TimeSigTrack.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/Track.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/Write.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/XML.Plo@am__quote@ - -distclean-depend: - -rm -rf ./$(DEPDIR) +maintainer-clean-compile: -.cpp.o: -@AMDEP_TRUE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@ -@AMDEP_TRUE@ $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - $(CXXCOMPILE) -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$< - -.cpp.obj: -@AMDEP_TRUE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@ -@AMDEP_TRUE@ $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - $(CXXCOMPILE) -c -o $@ `cygpath -w $<` +.s.lo: + $(LIBTOOL) --mode=compile $(COMPILE) -c $< -.cpp.lo: -@AMDEP_TRUE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ -@AMDEP_TRUE@ depfile='$(DEPDIR)/$*.Plo' tmpdepfile='$(DEPDIR)/$*.TPlo' @AMDEPBACKSLASH@ -@AMDEP_TRUE@ $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - $(LTCXXCOMPILE) -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$< -CXXDEPMODE = @CXXDEPMODE@ +.S.lo: + $(LIBTOOL) --mode=compile $(COMPILE) -c $< mostlyclean-libtool: -rm -f *.lo @@ -221,170 +199,211 @@ -rm -rf .libs _libs distclean-libtool: - -rm -f libtool -uninstall-info-am: -tse3filehHEADERS_INSTALL = $(INSTALL_HEADER) + +maintainer-clean-libtool: + +libtse3file.la: $(libtse3file_la_OBJECTS) $(libtse3file_la_DEPENDENCIES) + $(CXXLINK) $(libtse3file_la_LDFLAGS) $(libtse3file_la_OBJECTS) $(libtse3file_la_LIBADD) $(LIBS) +.cpp.o: + $(CXXCOMPILE) -c $< +.cpp.obj: + $(CXXCOMPILE) -c `cygpath -w $<` +.cpp.lo: + $(LTCXXCOMPILE) -c $< + install-tse3filehHEADERS: $(tse3fileh_HEADERS) @$(NORMAL_INSTALL) $(mkinstalldirs) $(DESTDIR)$(tse3filehdir) @list='$(tse3fileh_HEADERS)'; for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - f="`echo $$p | sed -e 's|^.*/||'`"; \ - echo " $(tse3filehHEADERS_INSTALL) $$d$$p $(DESTDIR)$(tse3filehdir)/$$f"; \ - $(tse3filehHEADERS_INSTALL) $$d$$p $(DESTDIR)$(tse3filehdir)/$$f; \ + if test -f "$$p"; then d= ; else d="$(srcdir)/"; fi; \ + echo " $(INSTALL_DATA) $$d$$p $(DESTDIR)$(tse3filehdir)/$$p"; \ + $(INSTALL_DATA) $$d$$p $(DESTDIR)$(tse3filehdir)/$$p; \ done uninstall-tse3filehHEADERS: @$(NORMAL_UNINSTALL) - @list='$(tse3fileh_HEADERS)'; for p in $$list; do \ - f="`echo $$p | sed -e 's|^.*/||'`"; \ - echo " rm -f $(DESTDIR)$(tse3filehdir)/$$f"; \ - rm -f $(DESTDIR)$(tse3filehdir)/$$f; \ + list='$(tse3fileh_HEADERS)'; for p in $$list; do \ + rm -f $(DESTDIR)$(tse3filehdir)/$$p; \ done -ETAGS = etags -ETAGSFLAGS = - tags: TAGS -ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ +ID: $(HEADERS) $(SOURCES) $(LISP) + list='$(SOURCES) $(HEADERS)'; \ + unique=`for i in $$list; do echo $$i; done | \ + awk ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ - mkid -fID $$unique + here=`pwd` && cd $(srcdir) \ + && mkid -f$$here/ID $$unique $(LISP) -TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) +TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP) tags=; \ here=`pwd`; \ - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ + list='$(SOURCES) $(HEADERS)'; \ + unique=`for i in $$list; do echo $$i; done | \ + awk ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ - test -z "$(ETAGS_ARGS)$$tags$$unique" \ - || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$tags $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && cd $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) $$here + test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \ + || (cd $(srcdir) && etags -o $$here/TAGS $(ETAGS_ARGS) $$tags $$unique $(LISP)) + +mostlyclean-tags: + +clean-tags: distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) + -rm -f TAGS ID + +maintainer-clean-tags: -top_distdir = ../../.. -distdir = $(top_distdir)/$(PACKAGE)-$(VERSION) +distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir) + +subdir = src/tse3/file distdir: $(DISTFILES) - @list='$(DISTFILES)'; for file in $$list; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test "$$dir" != "$$file" && test "$$dir" != "."; then \ - dir="/$$dir"; \ - $(mkinstalldirs) "$(distdir)$$dir"; \ - else \ - dir=''; \ - fi; \ + here=`cd $(top_builddir) && pwd`; \ + top_distdir=`cd $(top_distdir) && pwd`; \ + distdir=`cd $(distdir) && pwd`; \ + cd $(top_srcdir) \ + && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu src/tse3/file/Makefile + @for file in $(DISTFILES); do \ + d=$(srcdir); \ if test -d $$d/$$file; then \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ - fi; \ - cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + cp -pr $$d/$$file $(distdir)/$$file; \ else \ test -f $(distdir)/$$file \ - || cp -p $$d/$$file $(distdir)/$$file \ - || exit 1; \ + || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ + || cp -p $$d/$$file $(distdir)/$$file || :; \ fi; \ done -check-am: all-am -check: check-am -all-am: Makefile $(LTLIBRARIES) $(HEADERS) -installdirs: - $(mkinstalldirs) $(DESTDIR)$(tse3filehdir) +DEPS_MAGIC := $(shell mkdir .deps > /dev/null 2>&1 || :) -install: install-am +-include $(DEP_FILES) + +mostlyclean-depend: + +clean-depend: + +distclean-depend: + -rm -rf .deps + +maintainer-clean-depend: + +%.o: %.c + @echo '$(COMPILE) -c $<'; \ + $(COMPILE) -Wp,-MD,.deps/$(*F).pp -c $< + @-cp .deps/$(*F).pp .deps/$(*F).P; \ + tr ' ' '\012' < .deps/$(*F).pp \ + | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \ + >> .deps/$(*F).P; \ + rm .deps/$(*F).pp + +%.lo: %.c + @echo '$(LTCOMPILE) -c $<'; \ + $(LTCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $< + @-sed -e 's/^\([^:]*\)\.o[ ]*:/\1.lo \1.o :/' \ + < .deps/$(*F).pp > .deps/$(*F).P; \ + tr ' ' '\012' < .deps/$(*F).pp \ + | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \ + >> .deps/$(*F).P; \ + rm -f .deps/$(*F).pp + +%.o: %.cpp + @echo '$(CXXCOMPILE) -c $<'; \ + $(CXXCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $< + @-cp .deps/$(*F).pp .deps/$(*F).P; \ + tr ' ' '\012' < .deps/$(*F).pp \ + | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \ + >> .deps/$(*F).P; \ + rm .deps/$(*F).pp + +%.lo: %.cpp + @echo '$(LTCXXCOMPILE) -c $<'; \ + $(LTCXXCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $< + @-sed -e 's/^\([^:]*\)\.o[ ]*:/\1.lo \1.o :/' \ + < .deps/$(*F).pp > .deps/$(*F).P; \ + tr ' ' '\012' < .deps/$(*F).pp \ + | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \ + >> .deps/$(*F).P; \ + rm -f .deps/$(*F).pp +info-am: +info: info-am +dvi-am: +dvi: dvi-am +check-am: all-am +check: check-am +installcheck-am: +installcheck: installcheck-am +install-exec-am: install-exec: install-exec-am + +install-data-am: install-tse3filehHEADERS install-data: install-data-am -uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am +install: install-am +uninstall-am: uninstall-tse3filehHEADERS +uninstall: uninstall-am +all-am: Makefile $(LTLIBRARIES) $(HEADERS) +all-redirect: all-am install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install + $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install +installdirs: + $(mkinstalldirs) $(DESTDIR)$(tse3filehdir) + + mostlyclean-generic: clean-generic: distclean-generic: -rm -f Makefile $(CONFIG_CLEAN_FILES) + -rm -f config.cache config.log stamp-h stamp-h[0-9]* -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES) maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-am - -clean-am: clean-generic clean-libtool clean-noinstLTLIBRARIES \ - mostlyclean-am - -distclean: distclean-am - -distclean-am: clean-am distclean-compile distclean-depend \ - distclean-generic distclean-libtool distclean-tags - -dvi: dvi-am - -dvi-am: - -info: info-am +mostlyclean-am: mostlyclean-noinstLTLIBRARIES mostlyclean-compile \ + mostlyclean-libtool mostlyclean-tags mostlyclean-depend \ + mostlyclean-generic -info-am: +mostlyclean: mostlyclean-am -install-data-am: install-tse3filehHEADERS +clean-am: clean-noinstLTLIBRARIES clean-compile clean-libtool \ + clean-tags clean-depend clean-generic mostlyclean-am -install-exec-am: +clean: clean-am -install-info: install-info-am +distclean-am: distclean-noinstLTLIBRARIES distclean-compile \ + distclean-libtool distclean-tags distclean-depend \ + distclean-generic clean-am + -rm -f libtool -install-man: +distclean: distclean-am -installcheck-am: +maintainer-clean-am: maintainer-clean-noinstLTLIBRARIES \ + maintainer-clean-compile maintainer-clean-libtool \ + maintainer-clean-tags maintainer-clean-depend \ + maintainer-clean-generic distclean-am + @echo "This command is intended for maintainers to use;" + @echo "it deletes files that may require special tools to rebuild." maintainer-clean: maintainer-clean-am -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-compile mostlyclean-generic \ - mostlyclean-libtool - -uninstall-am: uninstall-info-am uninstall-tse3filehHEADERS +.PHONY: mostlyclean-noinstLTLIBRARIES distclean-noinstLTLIBRARIES \ +clean-noinstLTLIBRARIES maintainer-clean-noinstLTLIBRARIES \ +mostlyclean-compile distclean-compile clean-compile \ +maintainer-clean-compile mostlyclean-libtool distclean-libtool \ +clean-libtool maintainer-clean-libtool uninstall-tse3filehHEADERS \ +install-tse3filehHEADERS tags mostlyclean-tags distclean-tags \ +clean-tags maintainer-clean-tags distdir mostlyclean-depend \ +distclean-depend clean-depend maintainer-clean-depend info-am info \ +dvi-am dvi check check-am installcheck-am installcheck install-exec-am \ +install-exec install-data-am install-data install-am install \ +uninstall-am uninstall all-redirect all-am all installdirs \ +mostlyclean-generic distclean-generic clean-generic \ +maintainer-clean-generic clean mostlyclean distclean maintainer-clean -.PHONY: GTAGS all all-am check check-am clean clean-generic \ - clean-libtool clean-noinstLTLIBRARIES distclean \ - distclean-compile distclean-depend distclean-generic \ - distclean-libtool distclean-tags distdir dvi dvi-am info \ - info-am install install-am install-data install-data-am \ - install-exec install-exec-am install-info install-info-am \ - install-man install-strip install-tse3filehHEADERS installcheck \ - installcheck-am installdirs maintainer-clean \ - maintainer-clean-generic mostlyclean mostlyclean-compile \ - mostlyclean-generic mostlyclean-libtool tags uninstall \ - uninstall-am uninstall-info-am uninstall-tse3filehHEADERS # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. --- tse3-0.2.7.orig/src/tse3/file/XML.cpp +++ tse3-0.2.7/src/tse3/file/XML.cpp @@ -117,6 +117,13 @@ } +void TSE3::File::XmlFileWriter::element(const std::string &name, unsigned long value) +{ + indent(out); + out << "<" << name << " value=\"" << value << "\"/>\n"; +} + + void TSE3::File::XmlFileWriter::element(const std::string &name, bool value) { indent(out); --- tse3-0.2.7.orig/src/tse3/file/XML.h +++ tse3-0.2.7/src/tse3/file/XML.h @@ -154,6 +154,7 @@ void element(const std::string &name, const char *value); void element(const std::string &name, int value); void element(const std::string &name, unsigned int value); + void element(const std::string &name, unsigned long value); void element(const std::string &name, bool value); void comment(const std::string &comment); --- tse3-0.2.7.orig/src/tse3/ins/Makefile.in +++ tse3-0.2.7/src/tse3/ins/Makefile.in @@ -1,8 +1,6 @@ -# Makefile.in generated by automake 1.6.3 from Makefile.am. -# @configure_input@ +# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am -# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 -# Free Software Foundation, Inc. +# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. @@ -12,7 +10,7 @@ # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. -@SET_MAKE@ + SHELL = @SHELL@ srcdir = @srcdir@ @@ -33,9 +31,13 @@ mandir = @mandir@ includedir = @includedir@ oldincludedir = /usr/include + +DESTDIR = + pkgdatadir = $(datadir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ + top_builddir = ../../.. ACLOCAL = @ACLOCAL@ @@ -43,16 +45,12 @@ AUTOMAKE = @AUTOMAKE@ AUTOHEADER = @AUTOHEADER@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd INSTALL = @INSTALL@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS) INSTALL_DATA = @INSTALL_DATA@ -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_HEADER = $(INSTALL_DATA) transform = @program_transform_name@ + NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : @@ -61,29 +59,34 @@ POST_UNINSTALL = : host_alias = @host_alias@ host_triplet = @host@ - -EXEEXT = @EXEEXT@ -OBJEXT = @OBJEXT@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -AMTAR = @AMTAR@ +AR = @AR@ AS = @AS@ -AWK = @AWK@ CC = @CC@ CPP = @CPP@ CPP_MM = @CPP_MM@ CXX = @CXX@ -DEPDIR = @DEPDIR@ +CXXCPP = @CXXCPP@ DLLTOOL = @DLLTOOL@ ECHO = @ECHO@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +EGREP = @EGREP@ +EXEEXT = @EXEEXT@ +F77 = @F77@ +GCJ = @GCJ@ +GCJFLAGS = @GCJFLAGS@ +HAVE_LIB = @HAVE_LIB@ +LIB = @LIB@ LIBARTS = @LIBARTS@ LIBASOUND = @LIBASOUND@ LIBTOOL = @LIBTOOL@ LIBTOOL_DEPS = @LIBTOOL_DEPS@ LN_S = @LN_S@ +LTLIB = @LTLIB@ +MAKEINFO = @MAKEINFO@ OBJDUMP = @OBJDUMP@ +OBJEXT = @OBJEXT@ PACKAGE = @PACKAGE@ RANLIB = @RANLIB@ +RC = @RC@ STRIP = @STRIP@ TSE3_ALSA_PREFIX = @TSE3_ALSA_PREFIX@ TSE3_ALSA_VERSION = @TSE3_ALSA_VERSION@ @@ -95,9 +98,7 @@ TSE3_WITH_OSS = @TSE3_WITH_OSS@ TSE3_WITH_WIN32 = @TSE3_WITH_WIN32@ VERSION = @VERSION@ -am__include = @am__include@ -am__quote = @am__quote@ -install_sh = @install_sh@ + tse3insh_HEADERS = Destination.h Instrument.h tse3inshdir = $(pkgincludedir)/ins @@ -107,92 +108,84 @@ DISTCLEANFILES = ./.deps/* ./.deps/.P INCLUDES = -I$(top_srcdir)/src -subdir = src/tse3/ins mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = -LTLIBRARIES = $(noinst_LTLIBRARIES) - -libtse3ins_la_LDFLAGS = -libtse3ins_la_LIBADD = -am_libtse3ins_la_OBJECTS = Destination.lo Instrument.lo -libtse3ins_la_OBJECTS = $(am_libtse3ins_la_OBJECTS) +CONFIG_HEADER = ../../../config.h +CONFIG_CLEAN_FILES = +LTLIBRARIES = $(noinst_LTLIBRARIES) + -DEFS = @DEFS@ -DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir) +DEFS = @DEFS@ -I. -I$(srcdir) -I../../.. CPPFLAGS = @CPPFLAGS@ LDFLAGS = @LDFLAGS@ LIBS = @LIBS@ -depcomp = $(SHELL) $(top_srcdir)/depcomp -am__depfiles_maybe = depfiles -@AMDEP_TRUE@DEP_FILES = ./$(DEPDIR)/Destination.Plo \ -@AMDEP_TRUE@ ./$(DEPDIR)/Instrument.Plo -CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ - $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -LTCXXCOMPILE = $(LIBTOOL) --mode=compile $(CXX) $(DEFS) \ - $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ - $(AM_CXXFLAGS) $(CXXFLAGS) -CXXLD = $(CXX) -CXXLINK = $(LIBTOOL) --mode=link $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) \ - $(AM_LDFLAGS) $(LDFLAGS) -o $@ +libtse3ins_la_LDFLAGS = +libtse3ins_la_LIBADD = +libtse3ins_la_OBJECTS = Destination.lo Instrument.lo CXXFLAGS = @CXXFLAGS@ -DIST_SOURCES = $(libtse3ins_la_SOURCES) -HEADERS = $(tse3insh_HEADERS) +CXXCOMPILE = $(CXX) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) +LTCXXCOMPILE = $(LIBTOOL) --mode=compile $(CXX) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) +CXXLD = $(CXX) +CXXLINK = $(LIBTOOL) --mode=link $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) $(LDFLAGS) -o $@ +HEADERS = $(tse3insh_HEADERS) -DIST_COMMON = $(tse3insh_HEADERS) Makefile.am Makefile.in -SOURCES = $(libtse3ins_la_SOURCES) +DIST_COMMON = Makefile.am Makefile.in -all: all-am +DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) + +TAR = tar +GZIP_ENV = --best +DEP_FILES = .deps/Destination.P .deps/Instrument.P +SOURCES = $(libtse3ins_la_SOURCES) +OBJECTS = $(libtse3ins_la_OBJECTS) + +all: all-redirect .SUFFIXES: -.SUFFIXES: .cpp .lo .o .obj -$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) - cd $(top_srcdir) && \ - $(AUTOMAKE) --gnu src/tse3/ins/Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe) +.SUFFIXES: .S .c .cpp .lo .o .obj .s +$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) + cd $(top_srcdir) && $(AUTOMAKE) --gnu src/tse3/ins/Makefile + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES) + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status + + +mostlyclean-noinstLTLIBRARIES: clean-noinstLTLIBRARIES: -test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES) - @list='$(noinst_LTLIBRARIES)'; for p in $$list; do \ - dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \ - test -z "$dir" && dir=.; \ - echo "rm -f \"$${dir}/so_locations\""; \ - rm -f "$${dir}/so_locations"; \ - done -libtse3ins.la: $(libtse3ins_la_OBJECTS) $(libtse3ins_la_DEPENDENCIES) - $(CXXLINK) $(libtse3ins_la_LDFLAGS) $(libtse3ins_la_OBJECTS) $(libtse3ins_la_LIBADD) $(LIBS) + +distclean-noinstLTLIBRARIES: + +maintainer-clean-noinstLTLIBRARIES: + +# FIXME: We should only use cygpath when building on Windows, +# and only if it is available. +.c.obj: + $(COMPILE) -c `cygpath -w $<` + +.s.o: + $(COMPILE) -c $< + +.S.o: + $(COMPILE) -c $< mostlyclean-compile: - -rm -f *.$(OBJEXT) core *.core + -rm -f *.o core *.core + -rm -f *.$(OBJEXT) + +clean-compile: distclean-compile: -rm -f *.tab.c -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/Destination.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/Instrument.Plo@am__quote@ - -distclean-depend: - -rm -rf ./$(DEPDIR) +maintainer-clean-compile: -.cpp.o: -@AMDEP_TRUE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@ -@AMDEP_TRUE@ $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - $(CXXCOMPILE) -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$< - -.cpp.obj: -@AMDEP_TRUE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@ -@AMDEP_TRUE@ $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - $(CXXCOMPILE) -c -o $@ `cygpath -w $<` +.s.lo: + $(LIBTOOL) --mode=compile $(COMPILE) -c $< -.cpp.lo: -@AMDEP_TRUE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ -@AMDEP_TRUE@ depfile='$(DEPDIR)/$*.Plo' tmpdepfile='$(DEPDIR)/$*.TPlo' @AMDEPBACKSLASH@ -@AMDEP_TRUE@ $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - $(LTCXXCOMPILE) -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$< -CXXDEPMODE = @CXXDEPMODE@ +.S.lo: + $(LIBTOOL) --mode=compile $(COMPILE) -c $< mostlyclean-libtool: -rm -f *.lo @@ -201,170 +194,211 @@ -rm -rf .libs _libs distclean-libtool: - -rm -f libtool -uninstall-info-am: -tse3inshHEADERS_INSTALL = $(INSTALL_HEADER) + +maintainer-clean-libtool: + +libtse3ins.la: $(libtse3ins_la_OBJECTS) $(libtse3ins_la_DEPENDENCIES) + $(CXXLINK) $(libtse3ins_la_LDFLAGS) $(libtse3ins_la_OBJECTS) $(libtse3ins_la_LIBADD) $(LIBS) +.cpp.o: + $(CXXCOMPILE) -c $< +.cpp.obj: + $(CXXCOMPILE) -c `cygpath -w $<` +.cpp.lo: + $(LTCXXCOMPILE) -c $< + install-tse3inshHEADERS: $(tse3insh_HEADERS) @$(NORMAL_INSTALL) $(mkinstalldirs) $(DESTDIR)$(tse3inshdir) @list='$(tse3insh_HEADERS)'; for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - f="`echo $$p | sed -e 's|^.*/||'`"; \ - echo " $(tse3inshHEADERS_INSTALL) $$d$$p $(DESTDIR)$(tse3inshdir)/$$f"; \ - $(tse3inshHEADERS_INSTALL) $$d$$p $(DESTDIR)$(tse3inshdir)/$$f; \ + if test -f "$$p"; then d= ; else d="$(srcdir)/"; fi; \ + echo " $(INSTALL_DATA) $$d$$p $(DESTDIR)$(tse3inshdir)/$$p"; \ + $(INSTALL_DATA) $$d$$p $(DESTDIR)$(tse3inshdir)/$$p; \ done uninstall-tse3inshHEADERS: @$(NORMAL_UNINSTALL) - @list='$(tse3insh_HEADERS)'; for p in $$list; do \ - f="`echo $$p | sed -e 's|^.*/||'`"; \ - echo " rm -f $(DESTDIR)$(tse3inshdir)/$$f"; \ - rm -f $(DESTDIR)$(tse3inshdir)/$$f; \ + list='$(tse3insh_HEADERS)'; for p in $$list; do \ + rm -f $(DESTDIR)$(tse3inshdir)/$$p; \ done -ETAGS = etags -ETAGSFLAGS = - tags: TAGS -ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ +ID: $(HEADERS) $(SOURCES) $(LISP) + list='$(SOURCES) $(HEADERS)'; \ + unique=`for i in $$list; do echo $$i; done | \ + awk ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ - mkid -fID $$unique + here=`pwd` && cd $(srcdir) \ + && mkid -f$$here/ID $$unique $(LISP) -TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) +TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP) tags=; \ here=`pwd`; \ - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ + list='$(SOURCES) $(HEADERS)'; \ + unique=`for i in $$list; do echo $$i; done | \ + awk ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ - test -z "$(ETAGS_ARGS)$$tags$$unique" \ - || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$tags $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && cd $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) $$here + test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \ + || (cd $(srcdir) && etags -o $$here/TAGS $(ETAGS_ARGS) $$tags $$unique $(LISP)) + +mostlyclean-tags: + +clean-tags: distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) + -rm -f TAGS ID + +maintainer-clean-tags: -top_distdir = ../../.. -distdir = $(top_distdir)/$(PACKAGE)-$(VERSION) +distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir) + +subdir = src/tse3/ins distdir: $(DISTFILES) - @list='$(DISTFILES)'; for file in $$list; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test "$$dir" != "$$file" && test "$$dir" != "."; then \ - dir="/$$dir"; \ - $(mkinstalldirs) "$(distdir)$$dir"; \ - else \ - dir=''; \ - fi; \ + here=`cd $(top_builddir) && pwd`; \ + top_distdir=`cd $(top_distdir) && pwd`; \ + distdir=`cd $(distdir) && pwd`; \ + cd $(top_srcdir) \ + && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu src/tse3/ins/Makefile + @for file in $(DISTFILES); do \ + d=$(srcdir); \ if test -d $$d/$$file; then \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ - fi; \ - cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + cp -pr $$d/$$file $(distdir)/$$file; \ else \ test -f $(distdir)/$$file \ - || cp -p $$d/$$file $(distdir)/$$file \ - || exit 1; \ + || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ + || cp -p $$d/$$file $(distdir)/$$file || :; \ fi; \ done -check-am: all-am -check: check-am -all-am: Makefile $(LTLIBRARIES) $(HEADERS) -installdirs: - $(mkinstalldirs) $(DESTDIR)$(tse3inshdir) +DEPS_MAGIC := $(shell mkdir .deps > /dev/null 2>&1 || :) -install: install-am +-include $(DEP_FILES) + +mostlyclean-depend: + +clean-depend: + +distclean-depend: + -rm -rf .deps + +maintainer-clean-depend: + +%.o: %.c + @echo '$(COMPILE) -c $<'; \ + $(COMPILE) -Wp,-MD,.deps/$(*F).pp -c $< + @-cp .deps/$(*F).pp .deps/$(*F).P; \ + tr ' ' '\012' < .deps/$(*F).pp \ + | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \ + >> .deps/$(*F).P; \ + rm .deps/$(*F).pp + +%.lo: %.c + @echo '$(LTCOMPILE) -c $<'; \ + $(LTCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $< + @-sed -e 's/^\([^:]*\)\.o[ ]*:/\1.lo \1.o :/' \ + < .deps/$(*F).pp > .deps/$(*F).P; \ + tr ' ' '\012' < .deps/$(*F).pp \ + | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \ + >> .deps/$(*F).P; \ + rm -f .deps/$(*F).pp + +%.o: %.cpp + @echo '$(CXXCOMPILE) -c $<'; \ + $(CXXCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $< + @-cp .deps/$(*F).pp .deps/$(*F).P; \ + tr ' ' '\012' < .deps/$(*F).pp \ + | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \ + >> .deps/$(*F).P; \ + rm .deps/$(*F).pp + +%.lo: %.cpp + @echo '$(LTCXXCOMPILE) -c $<'; \ + $(LTCXXCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $< + @-sed -e 's/^\([^:]*\)\.o[ ]*:/\1.lo \1.o :/' \ + < .deps/$(*F).pp > .deps/$(*F).P; \ + tr ' ' '\012' < .deps/$(*F).pp \ + | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \ + >> .deps/$(*F).P; \ + rm -f .deps/$(*F).pp +info-am: +info: info-am +dvi-am: +dvi: dvi-am +check-am: all-am +check: check-am +installcheck-am: +installcheck: installcheck-am +install-exec-am: install-exec: install-exec-am + +install-data-am: install-tse3inshHEADERS install-data: install-data-am -uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am +install: install-am +uninstall-am: uninstall-tse3inshHEADERS +uninstall: uninstall-am +all-am: Makefile $(LTLIBRARIES) $(HEADERS) +all-redirect: all-am install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install + $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install +installdirs: + $(mkinstalldirs) $(DESTDIR)$(tse3inshdir) + + mostlyclean-generic: clean-generic: distclean-generic: -rm -f Makefile $(CONFIG_CLEAN_FILES) + -rm -f config.cache config.log stamp-h stamp-h[0-9]* -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES) maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-am - -clean-am: clean-generic clean-libtool clean-noinstLTLIBRARIES \ - mostlyclean-am - -distclean: distclean-am - -distclean-am: clean-am distclean-compile distclean-depend \ - distclean-generic distclean-libtool distclean-tags - -dvi: dvi-am - -dvi-am: - -info: info-am +mostlyclean-am: mostlyclean-noinstLTLIBRARIES mostlyclean-compile \ + mostlyclean-libtool mostlyclean-tags mostlyclean-depend \ + mostlyclean-generic -info-am: +mostlyclean: mostlyclean-am -install-data-am: install-tse3inshHEADERS +clean-am: clean-noinstLTLIBRARIES clean-compile clean-libtool \ + clean-tags clean-depend clean-generic mostlyclean-am -install-exec-am: +clean: clean-am -install-info: install-info-am +distclean-am: distclean-noinstLTLIBRARIES distclean-compile \ + distclean-libtool distclean-tags distclean-depend \ + distclean-generic clean-am + -rm -f libtool -install-man: +distclean: distclean-am -installcheck-am: +maintainer-clean-am: maintainer-clean-noinstLTLIBRARIES \ + maintainer-clean-compile maintainer-clean-libtool \ + maintainer-clean-tags maintainer-clean-depend \ + maintainer-clean-generic distclean-am + @echo "This command is intended for maintainers to use;" + @echo "it deletes files that may require special tools to rebuild." maintainer-clean: maintainer-clean-am -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-compile mostlyclean-generic \ - mostlyclean-libtool - -uninstall-am: uninstall-info-am uninstall-tse3inshHEADERS +.PHONY: mostlyclean-noinstLTLIBRARIES distclean-noinstLTLIBRARIES \ +clean-noinstLTLIBRARIES maintainer-clean-noinstLTLIBRARIES \ +mostlyclean-compile distclean-compile clean-compile \ +maintainer-clean-compile mostlyclean-libtool distclean-libtool \ +clean-libtool maintainer-clean-libtool uninstall-tse3inshHEADERS \ +install-tse3inshHEADERS tags mostlyclean-tags distclean-tags clean-tags \ +maintainer-clean-tags distdir mostlyclean-depend distclean-depend \ +clean-depend maintainer-clean-depend info-am info dvi-am dvi check \ +check-am installcheck-am installcheck install-exec-am install-exec \ +install-data-am install-data install-am install uninstall-am uninstall \ +all-redirect all-am all installdirs mostlyclean-generic \ +distclean-generic clean-generic maintainer-clean-generic clean \ +mostlyclean distclean maintainer-clean -.PHONY: GTAGS all all-am check check-am clean clean-generic \ - clean-libtool clean-noinstLTLIBRARIES distclean \ - distclean-compile distclean-depend distclean-generic \ - distclean-libtool distclean-tags distdir dvi dvi-am info \ - info-am install install-am install-data install-data-am \ - install-exec install-exec-am install-info install-info-am \ - install-man install-strip install-tse3inshHEADERS installcheck \ - installcheck-am installdirs maintainer-clean \ - maintainer-clean-generic mostlyclean mostlyclean-compile \ - mostlyclean-generic mostlyclean-libtool tags uninstall \ - uninstall-am uninstall-info-am uninstall-tse3inshHEADERS # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. --- tse3-0.2.7.orig/src/tse3/listen/app/Makefile.in +++ tse3-0.2.7/src/tse3/listen/app/Makefile.in @@ -1,8 +1,6 @@ -# Makefile.in generated by automake 1.6.3 from Makefile.am. -# @configure_input@ +# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am -# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 -# Free Software Foundation, Inc. +# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. @@ -12,7 +10,7 @@ # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. -@SET_MAKE@ + SHELL = @SHELL@ srcdir = @srcdir@ @@ -33,9 +31,13 @@ mandir = @mandir@ includedir = @includedir@ oldincludedir = /usr/include + +DESTDIR = + pkgdatadir = $(datadir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ + top_builddir = ../../../.. ACLOCAL = @ACLOCAL@ @@ -43,16 +45,12 @@ AUTOMAKE = @AUTOMAKE@ AUTOHEADER = @AUTOHEADER@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd INSTALL = @INSTALL@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS) INSTALL_DATA = @INSTALL_DATA@ -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_HEADER = $(INSTALL_DATA) transform = @program_transform_name@ + NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : @@ -61,29 +59,34 @@ POST_UNINSTALL = : host_alias = @host_alias@ host_triplet = @host@ - -EXEEXT = @EXEEXT@ -OBJEXT = @OBJEXT@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -AMTAR = @AMTAR@ +AR = @AR@ AS = @AS@ -AWK = @AWK@ CC = @CC@ CPP = @CPP@ CPP_MM = @CPP_MM@ CXX = @CXX@ -DEPDIR = @DEPDIR@ +CXXCPP = @CXXCPP@ DLLTOOL = @DLLTOOL@ ECHO = @ECHO@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +EGREP = @EGREP@ +EXEEXT = @EXEEXT@ +F77 = @F77@ +GCJ = @GCJ@ +GCJFLAGS = @GCJFLAGS@ +HAVE_LIB = @HAVE_LIB@ +LIB = @LIB@ LIBARTS = @LIBARTS@ LIBASOUND = @LIBASOUND@ LIBTOOL = @LIBTOOL@ LIBTOOL_DEPS = @LIBTOOL_DEPS@ LN_S = @LN_S@ +LTLIB = @LTLIB@ +MAKEINFO = @MAKEINFO@ OBJDUMP = @OBJDUMP@ +OBJEXT = @OBJEXT@ PACKAGE = @PACKAGE@ RANLIB = @RANLIB@ +RC = @RC@ STRIP = @STRIP@ TSE3_ALSA_PREFIX = @TSE3_ALSA_PREFIX@ TSE3_ALSA_VERSION = @TSE3_ALSA_VERSION@ @@ -95,200 +98,164 @@ TSE3_WITH_OSS = @TSE3_WITH_OSS@ TSE3_WITH_WIN32 = @TSE3_WITH_WIN32@ VERSION = @VERSION@ -am__include = @am__include@ -am__quote = @am__quote@ -install_sh = @install_sh@ + tse3listen_apph_HEADERS = Modified.h PartSelection.h Record.h TrackSelection.h tse3listen_apphdir = $(pkgincludedir)/listen/app DISTCLEANFILES = ./.deps/* ./.deps/.P INCLUDES = -I$(top_srcdir)/src -subdir = src/tse3/listen/app mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = -DIST_SOURCES = -HEADERS = $(tse3listen_apph_HEADERS) +CONFIG_HEADER = ../../../../config.h +CONFIG_CLEAN_FILES = +HEADERS = $(tse3listen_apph_HEADERS) + +DIST_COMMON = Makefile.am Makefile.in -DIST_COMMON = $(tse3listen_apph_HEADERS) Makefile.am Makefile.in -all: all-am +DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) + +TAR = tar +GZIP_ENV = --best +all: all-redirect .SUFFIXES: -$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) - cd $(top_srcdir) && \ - $(AUTOMAKE) --gnu src/tse3/listen/app/Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe) +$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) + cd $(top_srcdir) && $(AUTOMAKE) --gnu src/tse3/listen/app/Makefile -mostlyclean-libtool: - -rm -f *.lo +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES) + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status -clean-libtool: - -rm -rf .libs _libs -distclean-libtool: - -rm -f libtool -uninstall-info-am: -tse3listen_apphHEADERS_INSTALL = $(INSTALL_HEADER) install-tse3listen_apphHEADERS: $(tse3listen_apph_HEADERS) @$(NORMAL_INSTALL) $(mkinstalldirs) $(DESTDIR)$(tse3listen_apphdir) @list='$(tse3listen_apph_HEADERS)'; for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - f="`echo $$p | sed -e 's|^.*/||'`"; \ - echo " $(tse3listen_apphHEADERS_INSTALL) $$d$$p $(DESTDIR)$(tse3listen_apphdir)/$$f"; \ - $(tse3listen_apphHEADERS_INSTALL) $$d$$p $(DESTDIR)$(tse3listen_apphdir)/$$f; \ + if test -f "$$p"; then d= ; else d="$(srcdir)/"; fi; \ + echo " $(INSTALL_DATA) $$d$$p $(DESTDIR)$(tse3listen_apphdir)/$$p"; \ + $(INSTALL_DATA) $$d$$p $(DESTDIR)$(tse3listen_apphdir)/$$p; \ done uninstall-tse3listen_apphHEADERS: @$(NORMAL_UNINSTALL) - @list='$(tse3listen_apph_HEADERS)'; for p in $$list; do \ - f="`echo $$p | sed -e 's|^.*/||'`"; \ - echo " rm -f $(DESTDIR)$(tse3listen_apphdir)/$$f"; \ - rm -f $(DESTDIR)$(tse3listen_apphdir)/$$f; \ + list='$(tse3listen_apph_HEADERS)'; for p in $$list; do \ + rm -f $(DESTDIR)$(tse3listen_apphdir)/$$p; \ done -ETAGS = etags -ETAGSFLAGS = - tags: TAGS -ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ +ID: $(HEADERS) $(SOURCES) $(LISP) + list='$(SOURCES) $(HEADERS)'; \ + unique=`for i in $$list; do echo $$i; done | \ + awk ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ - mkid -fID $$unique + here=`pwd` && cd $(srcdir) \ + && mkid -f$$here/ID $$unique $(LISP) -TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) +TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP) tags=; \ here=`pwd`; \ - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ + list='$(SOURCES) $(HEADERS)'; \ + unique=`for i in $$list; do echo $$i; done | \ + awk ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ - test -z "$(ETAGS_ARGS)$$tags$$unique" \ - || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$tags $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && cd $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) $$here + test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \ + || (cd $(srcdir) && etags -o $$here/TAGS $(ETAGS_ARGS) $$tags $$unique $(LISP)) + +mostlyclean-tags: + +clean-tags: distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) + -rm -f TAGS ID -top_distdir = ../../../.. -distdir = $(top_distdir)/$(PACKAGE)-$(VERSION) +maintainer-clean-tags: + +distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir) + +subdir = src/tse3/listen/app distdir: $(DISTFILES) - @list='$(DISTFILES)'; for file in $$list; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test "$$dir" != "$$file" && test "$$dir" != "."; then \ - dir="/$$dir"; \ - $(mkinstalldirs) "$(distdir)$$dir"; \ - else \ - dir=''; \ - fi; \ + here=`cd $(top_builddir) && pwd`; \ + top_distdir=`cd $(top_distdir) && pwd`; \ + distdir=`cd $(distdir) && pwd`; \ + cd $(top_srcdir) \ + && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu src/tse3/listen/app/Makefile + @for file in $(DISTFILES); do \ + d=$(srcdir); \ if test -d $$d/$$file; then \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ - fi; \ - cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + cp -pr $$d/$$file $(distdir)/$$file; \ else \ test -f $(distdir)/$$file \ - || cp -p $$d/$$file $(distdir)/$$file \ - || exit 1; \ + || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ + || cp -p $$d/$$file $(distdir)/$$file || :; \ fi; \ done +info-am: +info: info-am +dvi-am: +dvi: dvi-am check-am: all-am check: check-am -all-am: Makefile $(HEADERS) - -installdirs: - $(mkinstalldirs) $(DESTDIR)$(tse3listen_apphdir) - -install: install-am +installcheck-am: +installcheck: installcheck-am +install-exec-am: install-exec: install-exec-am + +install-data-am: install-tse3listen_apphHEADERS install-data: install-data-am -uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am +install: install-am +uninstall-am: uninstall-tse3listen_apphHEADERS +uninstall: uninstall-am +all-am: Makefile $(HEADERS) +all-redirect: all-am install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install + $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install +installdirs: + $(mkinstalldirs) $(DESTDIR)$(tse3listen_apphdir) + + mostlyclean-generic: clean-generic: distclean-generic: -rm -f Makefile $(CONFIG_CLEAN_FILES) + -rm -f config.cache config.log stamp-h stamp-h[0-9]* -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES) maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-am - -clean-am: clean-generic clean-libtool mostlyclean-am - -distclean: distclean-am - -distclean-am: clean-am distclean-generic distclean-libtool \ - distclean-tags - -dvi: dvi-am - -dvi-am: - -info: info-am +mostlyclean-am: mostlyclean-tags mostlyclean-generic -info-am: +mostlyclean: mostlyclean-am -install-data-am: install-tse3listen_apphHEADERS +clean-am: clean-tags clean-generic mostlyclean-am -install-exec-am: +clean: clean-am -install-info: install-info-am +distclean-am: distclean-tags distclean-generic clean-am + -rm -f libtool -install-man: +distclean: distclean-am -installcheck-am: +maintainer-clean-am: maintainer-clean-tags maintainer-clean-generic \ + distclean-am + @echo "This command is intended for maintainers to use;" + @echo "it deletes files that may require special tools to rebuild." maintainer-clean: maintainer-clean-am -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-generic mostlyclean-libtool - -uninstall-am: uninstall-info-am uninstall-tse3listen_apphHEADERS +.PHONY: uninstall-tse3listen_apphHEADERS install-tse3listen_apphHEADERS \ +tags mostlyclean-tags distclean-tags clean-tags maintainer-clean-tags \ +distdir info-am info dvi-am dvi check check-am installcheck-am \ +installcheck install-exec-am install-exec install-data-am install-data \ +install-am install uninstall-am uninstall all-redirect all-am all \ +installdirs mostlyclean-generic distclean-generic clean-generic \ +maintainer-clean-generic clean mostlyclean distclean maintainer-clean -.PHONY: GTAGS all all-am check check-am clean clean-generic \ - clean-libtool distclean distclean-generic distclean-libtool \ - distclean-tags distdir dvi dvi-am info info-am install \ - install-am install-data install-data-am install-exec \ - install-exec-am install-info install-info-am install-man \ - install-strip install-tse3listen_apphHEADERS installcheck \ - installcheck-am installdirs maintainer-clean \ - maintainer-clean-generic mostlyclean mostlyclean-generic \ - mostlyclean-libtool tags uninstall uninstall-am \ - uninstall-info-am uninstall-tse3listen_apphHEADERS # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. --- tse3-0.2.7.orig/src/tse3/listen/cmd/Makefile.in +++ tse3-0.2.7/src/tse3/listen/cmd/Makefile.in @@ -1,8 +1,6 @@ -# Makefile.in generated by automake 1.6.3 from Makefile.am. -# @configure_input@ +# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am -# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 -# Free Software Foundation, Inc. +# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. @@ -12,7 +10,7 @@ # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. -@SET_MAKE@ + SHELL = @SHELL@ srcdir = @srcdir@ @@ -33,9 +31,13 @@ mandir = @mandir@ includedir = @includedir@ oldincludedir = /usr/include + +DESTDIR = + pkgdatadir = $(datadir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ + top_builddir = ../../../.. ACLOCAL = @ACLOCAL@ @@ -43,16 +45,12 @@ AUTOMAKE = @AUTOMAKE@ AUTOHEADER = @AUTOHEADER@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd INSTALL = @INSTALL@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS) INSTALL_DATA = @INSTALL_DATA@ -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_HEADER = $(INSTALL_DATA) transform = @program_transform_name@ + NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : @@ -61,29 +59,34 @@ POST_UNINSTALL = : host_alias = @host_alias@ host_triplet = @host@ - -EXEEXT = @EXEEXT@ -OBJEXT = @OBJEXT@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -AMTAR = @AMTAR@ +AR = @AR@ AS = @AS@ -AWK = @AWK@ CC = @CC@ CPP = @CPP@ CPP_MM = @CPP_MM@ CXX = @CXX@ -DEPDIR = @DEPDIR@ +CXXCPP = @CXXCPP@ DLLTOOL = @DLLTOOL@ ECHO = @ECHO@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +EGREP = @EGREP@ +EXEEXT = @EXEEXT@ +F77 = @F77@ +GCJ = @GCJ@ +GCJFLAGS = @GCJFLAGS@ +HAVE_LIB = @HAVE_LIB@ +LIB = @LIB@ LIBARTS = @LIBARTS@ LIBASOUND = @LIBASOUND@ LIBTOOL = @LIBTOOL@ LIBTOOL_DEPS = @LIBTOOL_DEPS@ LN_S = @LN_S@ +LTLIB = @LTLIB@ +MAKEINFO = @MAKEINFO@ OBJDUMP = @OBJDUMP@ +OBJEXT = @OBJEXT@ PACKAGE = @PACKAGE@ RANLIB = @RANLIB@ +RC = @RC@ STRIP = @STRIP@ TSE3_ALSA_PREFIX = @TSE3_ALSA_PREFIX@ TSE3_ALSA_VERSION = @TSE3_ALSA_VERSION@ @@ -95,200 +98,164 @@ TSE3_WITH_OSS = @TSE3_WITH_OSS@ TSE3_WITH_WIN32 = @TSE3_WITH_WIN32@ VERSION = @VERSION@ -am__include = @am__include@ -am__quote = @am__quote@ -install_sh = @install_sh@ + tse3listen_cmdh_HEADERS = CommandHistory.h tse3listen_cmdhdir = $(pkgincludedir)/listen/cmd DISTCLEANFILES = ./.deps/* ./.deps/.P INCLUDES = -I$(top_srcdir)/src -subdir = src/tse3/listen/cmd mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = -DIST_SOURCES = -HEADERS = $(tse3listen_cmdh_HEADERS) +CONFIG_HEADER = ../../../../config.h +CONFIG_CLEAN_FILES = +HEADERS = $(tse3listen_cmdh_HEADERS) + +DIST_COMMON = Makefile.am Makefile.in -DIST_COMMON = $(tse3listen_cmdh_HEADERS) Makefile.am Makefile.in -all: all-am +DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) + +TAR = tar +GZIP_ENV = --best +all: all-redirect .SUFFIXES: -$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) - cd $(top_srcdir) && \ - $(AUTOMAKE) --gnu src/tse3/listen/cmd/Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe) +$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) + cd $(top_srcdir) && $(AUTOMAKE) --gnu src/tse3/listen/cmd/Makefile -mostlyclean-libtool: - -rm -f *.lo +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES) + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status -clean-libtool: - -rm -rf .libs _libs -distclean-libtool: - -rm -f libtool -uninstall-info-am: -tse3listen_cmdhHEADERS_INSTALL = $(INSTALL_HEADER) install-tse3listen_cmdhHEADERS: $(tse3listen_cmdh_HEADERS) @$(NORMAL_INSTALL) $(mkinstalldirs) $(DESTDIR)$(tse3listen_cmdhdir) @list='$(tse3listen_cmdh_HEADERS)'; for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - f="`echo $$p | sed -e 's|^.*/||'`"; \ - echo " $(tse3listen_cmdhHEADERS_INSTALL) $$d$$p $(DESTDIR)$(tse3listen_cmdhdir)/$$f"; \ - $(tse3listen_cmdhHEADERS_INSTALL) $$d$$p $(DESTDIR)$(tse3listen_cmdhdir)/$$f; \ + if test -f "$$p"; then d= ; else d="$(srcdir)/"; fi; \ + echo " $(INSTALL_DATA) $$d$$p $(DESTDIR)$(tse3listen_cmdhdir)/$$p"; \ + $(INSTALL_DATA) $$d$$p $(DESTDIR)$(tse3listen_cmdhdir)/$$p; \ done uninstall-tse3listen_cmdhHEADERS: @$(NORMAL_UNINSTALL) - @list='$(tse3listen_cmdh_HEADERS)'; for p in $$list; do \ - f="`echo $$p | sed -e 's|^.*/||'`"; \ - echo " rm -f $(DESTDIR)$(tse3listen_cmdhdir)/$$f"; \ - rm -f $(DESTDIR)$(tse3listen_cmdhdir)/$$f; \ + list='$(tse3listen_cmdh_HEADERS)'; for p in $$list; do \ + rm -f $(DESTDIR)$(tse3listen_cmdhdir)/$$p; \ done -ETAGS = etags -ETAGSFLAGS = - tags: TAGS -ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ +ID: $(HEADERS) $(SOURCES) $(LISP) + list='$(SOURCES) $(HEADERS)'; \ + unique=`for i in $$list; do echo $$i; done | \ + awk ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ - mkid -fID $$unique + here=`pwd` && cd $(srcdir) \ + && mkid -f$$here/ID $$unique $(LISP) -TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) +TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP) tags=; \ here=`pwd`; \ - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ + list='$(SOURCES) $(HEADERS)'; \ + unique=`for i in $$list; do echo $$i; done | \ + awk ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ - test -z "$(ETAGS_ARGS)$$tags$$unique" \ - || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$tags $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && cd $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) $$here + test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \ + || (cd $(srcdir) && etags -o $$here/TAGS $(ETAGS_ARGS) $$tags $$unique $(LISP)) + +mostlyclean-tags: + +clean-tags: distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) + -rm -f TAGS ID -top_distdir = ../../../.. -distdir = $(top_distdir)/$(PACKAGE)-$(VERSION) +maintainer-clean-tags: + +distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir) + +subdir = src/tse3/listen/cmd distdir: $(DISTFILES) - @list='$(DISTFILES)'; for file in $$list; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test "$$dir" != "$$file" && test "$$dir" != "."; then \ - dir="/$$dir"; \ - $(mkinstalldirs) "$(distdir)$$dir"; \ - else \ - dir=''; \ - fi; \ + here=`cd $(top_builddir) && pwd`; \ + top_distdir=`cd $(top_distdir) && pwd`; \ + distdir=`cd $(distdir) && pwd`; \ + cd $(top_srcdir) \ + && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu src/tse3/listen/cmd/Makefile + @for file in $(DISTFILES); do \ + d=$(srcdir); \ if test -d $$d/$$file; then \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ - fi; \ - cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + cp -pr $$d/$$file $(distdir)/$$file; \ else \ test -f $(distdir)/$$file \ - || cp -p $$d/$$file $(distdir)/$$file \ - || exit 1; \ + || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ + || cp -p $$d/$$file $(distdir)/$$file || :; \ fi; \ done +info-am: +info: info-am +dvi-am: +dvi: dvi-am check-am: all-am check: check-am -all-am: Makefile $(HEADERS) - -installdirs: - $(mkinstalldirs) $(DESTDIR)$(tse3listen_cmdhdir) - -install: install-am +installcheck-am: +installcheck: installcheck-am +install-exec-am: install-exec: install-exec-am + +install-data-am: install-tse3listen_cmdhHEADERS install-data: install-data-am -uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am +install: install-am +uninstall-am: uninstall-tse3listen_cmdhHEADERS +uninstall: uninstall-am +all-am: Makefile $(HEADERS) +all-redirect: all-am install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install + $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install +installdirs: + $(mkinstalldirs) $(DESTDIR)$(tse3listen_cmdhdir) + + mostlyclean-generic: clean-generic: distclean-generic: -rm -f Makefile $(CONFIG_CLEAN_FILES) + -rm -f config.cache config.log stamp-h stamp-h[0-9]* -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES) maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-am - -clean-am: clean-generic clean-libtool mostlyclean-am - -distclean: distclean-am - -distclean-am: clean-am distclean-generic distclean-libtool \ - distclean-tags - -dvi: dvi-am - -dvi-am: - -info: info-am +mostlyclean-am: mostlyclean-tags mostlyclean-generic -info-am: +mostlyclean: mostlyclean-am -install-data-am: install-tse3listen_cmdhHEADERS +clean-am: clean-tags clean-generic mostlyclean-am -install-exec-am: +clean: clean-am -install-info: install-info-am +distclean-am: distclean-tags distclean-generic clean-am + -rm -f libtool -install-man: +distclean: distclean-am -installcheck-am: +maintainer-clean-am: maintainer-clean-tags maintainer-clean-generic \ + distclean-am + @echo "This command is intended for maintainers to use;" + @echo "it deletes files that may require special tools to rebuild." maintainer-clean: maintainer-clean-am -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-generic mostlyclean-libtool - -uninstall-am: uninstall-info-am uninstall-tse3listen_cmdhHEADERS +.PHONY: uninstall-tse3listen_cmdhHEADERS install-tse3listen_cmdhHEADERS \ +tags mostlyclean-tags distclean-tags clean-tags maintainer-clean-tags \ +distdir info-am info dvi-am dvi check check-am installcheck-am \ +installcheck install-exec-am install-exec install-data-am install-data \ +install-am install uninstall-am uninstall all-redirect all-am all \ +installdirs mostlyclean-generic distclean-generic clean-generic \ +maintainer-clean-generic clean mostlyclean distclean maintainer-clean -.PHONY: GTAGS all all-am check check-am clean clean-generic \ - clean-libtool distclean distclean-generic distclean-libtool \ - distclean-tags distdir dvi dvi-am info info-am install \ - install-am install-data install-data-am install-exec \ - install-exec-am install-info install-info-am install-man \ - install-strip install-tse3listen_cmdhHEADERS installcheck \ - installcheck-am installdirs maintainer-clean \ - maintainer-clean-generic mostlyclean mostlyclean-generic \ - mostlyclean-libtool tags uninstall uninstall-am \ - uninstall-info-am uninstall-tse3listen_cmdhHEADERS # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. --- tse3-0.2.7.orig/src/tse3/listen/ins/Makefile.in +++ tse3-0.2.7/src/tse3/listen/ins/Makefile.in @@ -1,8 +1,6 @@ -# Makefile.in generated by automake 1.6.3 from Makefile.am. -# @configure_input@ +# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am -# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 -# Free Software Foundation, Inc. +# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. @@ -12,7 +10,7 @@ # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. -@SET_MAKE@ + SHELL = @SHELL@ srcdir = @srcdir@ @@ -33,9 +31,13 @@ mandir = @mandir@ includedir = @includedir@ oldincludedir = /usr/include + +DESTDIR = + pkgdatadir = $(datadir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ + top_builddir = ../../../.. ACLOCAL = @ACLOCAL@ @@ -43,16 +45,12 @@ AUTOMAKE = @AUTOMAKE@ AUTOHEADER = @AUTOHEADER@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd INSTALL = @INSTALL@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS) INSTALL_DATA = @INSTALL_DATA@ -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_HEADER = $(INSTALL_DATA) transform = @program_transform_name@ + NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : @@ -61,29 +59,34 @@ POST_UNINSTALL = : host_alias = @host_alias@ host_triplet = @host@ - -EXEEXT = @EXEEXT@ -OBJEXT = @OBJEXT@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -AMTAR = @AMTAR@ +AR = @AR@ AS = @AS@ -AWK = @AWK@ CC = @CC@ CPP = @CPP@ CPP_MM = @CPP_MM@ CXX = @CXX@ -DEPDIR = @DEPDIR@ +CXXCPP = @CXXCPP@ DLLTOOL = @DLLTOOL@ ECHO = @ECHO@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +EGREP = @EGREP@ +EXEEXT = @EXEEXT@ +F77 = @F77@ +GCJ = @GCJ@ +GCJFLAGS = @GCJFLAGS@ +HAVE_LIB = @HAVE_LIB@ +LIB = @LIB@ LIBARTS = @LIBARTS@ LIBASOUND = @LIBASOUND@ LIBTOOL = @LIBTOOL@ LIBTOOL_DEPS = @LIBTOOL_DEPS@ LN_S = @LN_S@ +LTLIB = @LTLIB@ +MAKEINFO = @MAKEINFO@ OBJDUMP = @OBJDUMP@ +OBJEXT = @OBJEXT@ PACKAGE = @PACKAGE@ RANLIB = @RANLIB@ +RC = @RC@ STRIP = @STRIP@ TSE3_ALSA_PREFIX = @TSE3_ALSA_PREFIX@ TSE3_ALSA_VERSION = @TSE3_ALSA_VERSION@ @@ -95,200 +98,164 @@ TSE3_WITH_OSS = @TSE3_WITH_OSS@ TSE3_WITH_WIN32 = @TSE3_WITH_WIN32@ VERSION = @VERSION@ -am__include = @am__include@ -am__quote = @am__quote@ -install_sh = @install_sh@ + tse3listen_insh_HEADERS = Destination.h tse3listen_inshdir = $(pkgincludedir)/listen/ins DISTCLEANFILES = ./.deps/* ./.deps/.P INCLUDES = -I$(top_srcdir)/src -subdir = src/tse3/listen/ins mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = -DIST_SOURCES = -HEADERS = $(tse3listen_insh_HEADERS) +CONFIG_HEADER = ../../../../config.h +CONFIG_CLEAN_FILES = +HEADERS = $(tse3listen_insh_HEADERS) + +DIST_COMMON = Makefile.am Makefile.in -DIST_COMMON = $(tse3listen_insh_HEADERS) Makefile.am Makefile.in -all: all-am +DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) + +TAR = tar +GZIP_ENV = --best +all: all-redirect .SUFFIXES: -$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) - cd $(top_srcdir) && \ - $(AUTOMAKE) --gnu src/tse3/listen/ins/Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe) +$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) + cd $(top_srcdir) && $(AUTOMAKE) --gnu src/tse3/listen/ins/Makefile -mostlyclean-libtool: - -rm -f *.lo +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES) + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status -clean-libtool: - -rm -rf .libs _libs -distclean-libtool: - -rm -f libtool -uninstall-info-am: -tse3listen_inshHEADERS_INSTALL = $(INSTALL_HEADER) install-tse3listen_inshHEADERS: $(tse3listen_insh_HEADERS) @$(NORMAL_INSTALL) $(mkinstalldirs) $(DESTDIR)$(tse3listen_inshdir) @list='$(tse3listen_insh_HEADERS)'; for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - f="`echo $$p | sed -e 's|^.*/||'`"; \ - echo " $(tse3listen_inshHEADERS_INSTALL) $$d$$p $(DESTDIR)$(tse3listen_inshdir)/$$f"; \ - $(tse3listen_inshHEADERS_INSTALL) $$d$$p $(DESTDIR)$(tse3listen_inshdir)/$$f; \ + if test -f "$$p"; then d= ; else d="$(srcdir)/"; fi; \ + echo " $(INSTALL_DATA) $$d$$p $(DESTDIR)$(tse3listen_inshdir)/$$p"; \ + $(INSTALL_DATA) $$d$$p $(DESTDIR)$(tse3listen_inshdir)/$$p; \ done uninstall-tse3listen_inshHEADERS: @$(NORMAL_UNINSTALL) - @list='$(tse3listen_insh_HEADERS)'; for p in $$list; do \ - f="`echo $$p | sed -e 's|^.*/||'`"; \ - echo " rm -f $(DESTDIR)$(tse3listen_inshdir)/$$f"; \ - rm -f $(DESTDIR)$(tse3listen_inshdir)/$$f; \ + list='$(tse3listen_insh_HEADERS)'; for p in $$list; do \ + rm -f $(DESTDIR)$(tse3listen_inshdir)/$$p; \ done -ETAGS = etags -ETAGSFLAGS = - tags: TAGS -ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ +ID: $(HEADERS) $(SOURCES) $(LISP) + list='$(SOURCES) $(HEADERS)'; \ + unique=`for i in $$list; do echo $$i; done | \ + awk ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ - mkid -fID $$unique + here=`pwd` && cd $(srcdir) \ + && mkid -f$$here/ID $$unique $(LISP) -TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) +TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP) tags=; \ here=`pwd`; \ - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ + list='$(SOURCES) $(HEADERS)'; \ + unique=`for i in $$list; do echo $$i; done | \ + awk ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ - test -z "$(ETAGS_ARGS)$$tags$$unique" \ - || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$tags $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && cd $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) $$here + test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \ + || (cd $(srcdir) && etags -o $$here/TAGS $(ETAGS_ARGS) $$tags $$unique $(LISP)) + +mostlyclean-tags: + +clean-tags: distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) + -rm -f TAGS ID -top_distdir = ../../../.. -distdir = $(top_distdir)/$(PACKAGE)-$(VERSION) +maintainer-clean-tags: + +distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir) + +subdir = src/tse3/listen/ins distdir: $(DISTFILES) - @list='$(DISTFILES)'; for file in $$list; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test "$$dir" != "$$file" && test "$$dir" != "."; then \ - dir="/$$dir"; \ - $(mkinstalldirs) "$(distdir)$$dir"; \ - else \ - dir=''; \ - fi; \ + here=`cd $(top_builddir) && pwd`; \ + top_distdir=`cd $(top_distdir) && pwd`; \ + distdir=`cd $(distdir) && pwd`; \ + cd $(top_srcdir) \ + && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu src/tse3/listen/ins/Makefile + @for file in $(DISTFILES); do \ + d=$(srcdir); \ if test -d $$d/$$file; then \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ - fi; \ - cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + cp -pr $$d/$$file $(distdir)/$$file; \ else \ test -f $(distdir)/$$file \ - || cp -p $$d/$$file $(distdir)/$$file \ - || exit 1; \ + || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ + || cp -p $$d/$$file $(distdir)/$$file || :; \ fi; \ done +info-am: +info: info-am +dvi-am: +dvi: dvi-am check-am: all-am check: check-am -all-am: Makefile $(HEADERS) - -installdirs: - $(mkinstalldirs) $(DESTDIR)$(tse3listen_inshdir) - -install: install-am +installcheck-am: +installcheck: installcheck-am +install-exec-am: install-exec: install-exec-am + +install-data-am: install-tse3listen_inshHEADERS install-data: install-data-am -uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am +install: install-am +uninstall-am: uninstall-tse3listen_inshHEADERS +uninstall: uninstall-am +all-am: Makefile $(HEADERS) +all-redirect: all-am install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install + $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install +installdirs: + $(mkinstalldirs) $(DESTDIR)$(tse3listen_inshdir) + + mostlyclean-generic: clean-generic: distclean-generic: -rm -f Makefile $(CONFIG_CLEAN_FILES) + -rm -f config.cache config.log stamp-h stamp-h[0-9]* -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES) maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-am - -clean-am: clean-generic clean-libtool mostlyclean-am - -distclean: distclean-am - -distclean-am: clean-am distclean-generic distclean-libtool \ - distclean-tags - -dvi: dvi-am - -dvi-am: - -info: info-am +mostlyclean-am: mostlyclean-tags mostlyclean-generic -info-am: +mostlyclean: mostlyclean-am -install-data-am: install-tse3listen_inshHEADERS +clean-am: clean-tags clean-generic mostlyclean-am -install-exec-am: +clean: clean-am -install-info: install-info-am +distclean-am: distclean-tags distclean-generic clean-am + -rm -f libtool -install-man: +distclean: distclean-am -installcheck-am: +maintainer-clean-am: maintainer-clean-tags maintainer-clean-generic \ + distclean-am + @echo "This command is intended for maintainers to use;" + @echo "it deletes files that may require special tools to rebuild." maintainer-clean: maintainer-clean-am -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-generic mostlyclean-libtool - -uninstall-am: uninstall-info-am uninstall-tse3listen_inshHEADERS +.PHONY: uninstall-tse3listen_inshHEADERS install-tse3listen_inshHEADERS \ +tags mostlyclean-tags distclean-tags clean-tags maintainer-clean-tags \ +distdir info-am info dvi-am dvi check check-am installcheck-am \ +installcheck install-exec-am install-exec install-data-am install-data \ +install-am install uninstall-am uninstall all-redirect all-am all \ +installdirs mostlyclean-generic distclean-generic clean-generic \ +maintainer-clean-generic clean mostlyclean distclean maintainer-clean -.PHONY: GTAGS all all-am check check-am clean clean-generic \ - clean-libtool distclean distclean-generic distclean-libtool \ - distclean-tags distdir dvi dvi-am info info-am install \ - install-am install-data install-data-am install-exec \ - install-exec-am install-info install-info-am install-man \ - install-strip install-tse3listen_inshHEADERS installcheck \ - installcheck-am installdirs maintainer-clean \ - maintainer-clean-generic mostlyclean mostlyclean-generic \ - mostlyclean-libtool tags uninstall uninstall-am \ - uninstall-info-am uninstall-tse3listen_inshHEADERS # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. --- tse3-0.2.7.orig/src/tse3/listen/Makefile.in +++ tse3-0.2.7/src/tse3/listen/Makefile.in @@ -1,8 +1,6 @@ -# Makefile.in generated by automake 1.6.3 from Makefile.am. -# @configure_input@ +# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am -# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 -# Free Software Foundation, Inc. +# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. @@ -12,7 +10,7 @@ # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. -@SET_MAKE@ + SHELL = @SHELL@ srcdir = @srcdir@ @@ -33,9 +31,13 @@ mandir = @mandir@ includedir = @includedir@ oldincludedir = /usr/include + +DESTDIR = + pkgdatadir = $(datadir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ + top_builddir = ../../.. ACLOCAL = @ACLOCAL@ @@ -43,16 +45,12 @@ AUTOMAKE = @AUTOMAKE@ AUTOHEADER = @AUTOHEADER@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd INSTALL = @INSTALL@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS) INSTALL_DATA = @INSTALL_DATA@ -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_HEADER = $(INSTALL_DATA) transform = @program_transform_name@ + NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : @@ -61,29 +59,34 @@ POST_UNINSTALL = : host_alias = @host_alias@ host_triplet = @host@ - -EXEEXT = @EXEEXT@ -OBJEXT = @OBJEXT@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -AMTAR = @AMTAR@ +AR = @AR@ AS = @AS@ -AWK = @AWK@ CC = @CC@ CPP = @CPP@ CPP_MM = @CPP_MM@ CXX = @CXX@ -DEPDIR = @DEPDIR@ +CXXCPP = @CXXCPP@ DLLTOOL = @DLLTOOL@ ECHO = @ECHO@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +EGREP = @EGREP@ +EXEEXT = @EXEEXT@ +F77 = @F77@ +GCJ = @GCJ@ +GCJFLAGS = @GCJFLAGS@ +HAVE_LIB = @HAVE_LIB@ +LIB = @LIB@ LIBARTS = @LIBARTS@ LIBASOUND = @LIBASOUND@ LIBTOOL = @LIBTOOL@ LIBTOOL_DEPS = @LIBTOOL_DEPS@ LN_S = @LN_S@ +LTLIB = @LTLIB@ +MAKEINFO = @MAKEINFO@ OBJDUMP = @OBJDUMP@ +OBJEXT = @OBJEXT@ PACKAGE = @PACKAGE@ RANLIB = @RANLIB@ +RC = @RC@ STRIP = @STRIP@ TSE3_ALSA_PREFIX = @TSE3_ALSA_PREFIX@ TSE3_ALSA_VERSION = @TSE3_ALSA_VERSION@ @@ -95,9 +98,7 @@ TSE3_WITH_OSS = @TSE3_WITH_OSS@ TSE3_WITH_WIN32 = @TSE3_WITH_WIN32@ VERSION = @VERSION@ -am__include = @am__include@ -am__quote = @am__quote@ -install_sh = @install_sh@ + tse3listenh_HEADERS = DisplayParams.h EventTrack.h FlagTrack.h KeySigTrack.h Metronome.h MidiCommandFilter.h MidiData.h MidiEcho.h MidiFile.h MidiFilter.h MidiMapper.h MidiParams.h MidiScheduler.h Mixer.h Panic.h Part.h Phrase.h PhraseEdit.h PhraseList.h Playable.h RepeatTrack.h Song.h TempoTrack.h TimeSigTrack.h Track.h Transport.h tse3listenhdir = $(pkgincludedir)/listen @@ -106,55 +107,41 @@ DISTCLEANFILES = ./.deps/* ./.deps/.P INCLUDES = -I$(top_srcdir)/src -subdir = src/tse3/listen mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = -DIST_SOURCES = -HEADERS = $(tse3listenh_HEADERS) +CONFIG_HEADER = ../../../config.h +CONFIG_CLEAN_FILES = +HEADERS = $(tse3listenh_HEADERS) + +DIST_COMMON = Makefile.am Makefile.in -RECURSIVE_TARGETS = info-recursive dvi-recursive install-info-recursive \ - uninstall-info-recursive all-recursive install-data-recursive \ - install-exec-recursive installdirs-recursive install-recursive \ - uninstall-recursive check-recursive installcheck-recursive -DIST_COMMON = $(tse3listenh_HEADERS) Makefile.am Makefile.in -DIST_SUBDIRS = $(SUBDIRS) -all: all-recursive +DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) +TAR = tar +GZIP_ENV = --best +all: all-redirect .SUFFIXES: -$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) - cd $(top_srcdir) && \ - $(AUTOMAKE) --gnu src/tse3/listen/Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe) +$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) + cd $(top_srcdir) && $(AUTOMAKE) --gnu src/tse3/listen/Makefile -mostlyclean-libtool: - -rm -f *.lo +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES) + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status -clean-libtool: - -rm -rf .libs _libs -distclean-libtool: - -rm -f libtool -uninstall-info-am: -tse3listenhHEADERS_INSTALL = $(INSTALL_HEADER) install-tse3listenhHEADERS: $(tse3listenh_HEADERS) @$(NORMAL_INSTALL) $(mkinstalldirs) $(DESTDIR)$(tse3listenhdir) @list='$(tse3listenh_HEADERS)'; for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - f="`echo $$p | sed -e 's|^.*/||'`"; \ - echo " $(tse3listenhHEADERS_INSTALL) $$d$$p $(DESTDIR)$(tse3listenhdir)/$$f"; \ - $(tse3listenhHEADERS_INSTALL) $$d$$p $(DESTDIR)$(tse3listenhdir)/$$f; \ + if test -f "$$p"; then d= ; else d="$(srcdir)/"; fi; \ + echo " $(INSTALL_DATA) $$d$$p $(DESTDIR)$(tse3listenhdir)/$$p"; \ + $(INSTALL_DATA) $$d$$p $(DESTDIR)$(tse3listenhdir)/$$p; \ done uninstall-tse3listenhHEADERS: @$(NORMAL_UNINSTALL) - @list='$(tse3listenh_HEADERS)'; for p in $$list; do \ - f="`echo $$p | sed -e 's|^.*/||'`"; \ - echo " rm -f $(DESTDIR)$(tse3listenhdir)/$$f"; \ - rm -f $(DESTDIR)$(tse3listenhdir)/$$f; \ + list='$(tse3listenh_HEADERS)'; for p in $$list; do \ + rm -f $(DESTDIR)$(tse3listenhdir)/$$p; \ done # This directory's subdirectories are mostly independent; you can cd @@ -163,8 +150,13 @@ # (1) if the variable is set in `config.status', edit `config.status' # (which will cause the Makefiles to be regenerated when you run `make'); # (2) otherwise, pass the desired values on the `make' command line. -$(RECURSIVE_TARGETS): - @set fnord $$MAKEFLAGS; amf=$$2; \ + +@SET_MAKE@ + +all-recursive install-data-recursive install-exec-recursive \ +installdirs-recursive install-recursive uninstall-recursive \ +check-recursive installcheck-recursive info-recursive dvi-recursive: + @set fnord $(MAKEFLAGS); amf=$$2; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ @@ -184,18 +176,13 @@ mostlyclean-recursive clean-recursive distclean-recursive \ maintainer-clean-recursive: - @set fnord $$MAKEFLAGS; amf=$$2; \ + @set fnord $(MAKEFLAGS); amf=$$2; \ dot_seen=no; \ - case "$@" in \ - distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ - *) list='$(SUBDIRS)' ;; \ - esac; \ - rev=''; for subdir in $$list; do \ - if test "$$subdir" = "."; then :; else \ - rev="$$subdir $$rev"; \ - fi; \ + rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \ + rev="$$subdir $$rev"; \ + test "$$subdir" != "." || dot_seen=yes; \ done; \ - rev="$$rev ."; \ + test "$$dot_seen" = "no" && rev=". $$rev"; \ target=`echo $@ | sed s/-recursive//`; \ for subdir in $$rev; do \ echo "Making $$target in $$subdir"; \ @@ -212,172 +199,141 @@ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ done -ETAGS = etags -ETAGSFLAGS = - tags: TAGS -ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ +ID: $(HEADERS) $(SOURCES) $(LISP) + list='$(SOURCES) $(HEADERS)'; \ + unique=`for i in $$list; do echo $$i; done | \ + awk ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ - mkid -fID $$unique + here=`pwd` && cd $(srcdir) \ + && mkid -f$$here/ID $$unique $(LISP) -TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) +TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP) tags=; \ here=`pwd`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ - if test "$$subdir" = .; then :; else \ + if test "$$subdir" = .; then :; else \ test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \ - fi; \ + fi; \ done; \ - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ + list='$(SOURCES) $(HEADERS)'; \ + unique=`for i in $$list; do echo $$i; done | \ + awk ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ - test -z "$(ETAGS_ARGS)$$tags$$unique" \ - || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$tags $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && cd $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) $$here + test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \ + || (cd $(srcdir) && etags -o $$here/TAGS $(ETAGS_ARGS) $$tags $$unique $(LISP)) + +mostlyclean-tags: + +clean-tags: distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) + -rm -f TAGS ID + +maintainer-clean-tags: -top_distdir = ../../.. -distdir = $(top_distdir)/$(PACKAGE)-$(VERSION) +distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir) + +subdir = src/tse3/listen distdir: $(DISTFILES) - @list='$(DISTFILES)'; for file in $$list; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test "$$dir" != "$$file" && test "$$dir" != "."; then \ - dir="/$$dir"; \ - $(mkinstalldirs) "$(distdir)$$dir"; \ - else \ - dir=''; \ - fi; \ + here=`cd $(top_builddir) && pwd`; \ + top_distdir=`cd $(top_distdir) && pwd`; \ + distdir=`cd $(distdir) && pwd`; \ + cd $(top_srcdir) \ + && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu src/tse3/listen/Makefile + @for file in $(DISTFILES); do \ + d=$(srcdir); \ if test -d $$d/$$file; then \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ - fi; \ - cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + cp -pr $$d/$$file $(distdir)/$$file; \ else \ test -f $(distdir)/$$file \ - || cp -p $$d/$$file $(distdir)/$$file \ - || exit 1; \ + || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ + || cp -p $$d/$$file $(distdir)/$$file || :; \ fi; \ done - list='$(SUBDIRS)'; for subdir in $$list; do \ + for subdir in $(SUBDIRS); do \ if test "$$subdir" = .; then :; else \ test -d $(distdir)/$$subdir \ || mkdir $(distdir)/$$subdir \ || exit 1; \ - (cd $$subdir && \ - $(MAKE) $(AM_MAKEFLAGS) \ - top_distdir="$(top_distdir)" \ - distdir=../$(distdir)/$$subdir \ - distdir) \ + chmod 777 $(distdir)/$$subdir; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(top_distdir) distdir=../$(distdir)/$$subdir distdir) \ || exit 1; \ fi; \ done +info-am: +info: info-recursive +dvi-am: +dvi: dvi-recursive check-am: all-am check: check-recursive -all-am: Makefile $(HEADERS) -installdirs: installdirs-recursive -installdirs-am: - $(mkinstalldirs) $(DESTDIR)$(tse3listenhdir) - -install: install-recursive +installcheck-am: +installcheck: installcheck-recursive +install-exec-am: install-exec: install-exec-recursive + +install-data-am: install-tse3listenhHEADERS install-data: install-data-recursive -uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-recursive +install: install-recursive +uninstall-am: uninstall-tse3listenhHEADERS +uninstall: uninstall-recursive +all-am: Makefile $(HEADERS) +all-redirect: all-recursive install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install + $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install +installdirs: installdirs-recursive +installdirs-am: + $(mkinstalldirs) $(DESTDIR)$(tse3listenhdir) + + mostlyclean-generic: clean-generic: distclean-generic: -rm -f Makefile $(CONFIG_CLEAN_FILES) + -rm -f config.cache config.log stamp-h stamp-h[0-9]* -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES) maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-recursive - -clean-am: clean-generic clean-libtool mostlyclean-am - -distclean: distclean-recursive - -distclean-am: clean-am distclean-generic distclean-libtool \ - distclean-tags +mostlyclean-am: mostlyclean-tags mostlyclean-generic -dvi: dvi-recursive - -dvi-am: - -info: info-recursive +mostlyclean: mostlyclean-recursive -info-am: +clean-am: clean-tags clean-generic mostlyclean-am -install-data-am: install-tse3listenhHEADERS - -install-exec-am: +clean: clean-recursive -install-info: install-info-recursive +distclean-am: distclean-tags distclean-generic clean-am + -rm -f libtool -install-man: +distclean: distclean-recursive -installcheck-am: +maintainer-clean-am: maintainer-clean-tags maintainer-clean-generic \ + distclean-am + @echo "This command is intended for maintainers to use;" + @echo "it deletes files that may require special tools to rebuild." maintainer-clean: maintainer-clean-recursive -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-recursive - -mostlyclean-am: mostlyclean-generic mostlyclean-libtool - -uninstall-am: uninstall-info-am uninstall-tse3listenhHEADERS - -uninstall-info: uninstall-info-recursive +.PHONY: uninstall-tse3listenhHEADERS install-tse3listenhHEADERS \ +install-data-recursive uninstall-data-recursive install-exec-recursive \ +uninstall-exec-recursive installdirs-recursive uninstalldirs-recursive \ +all-recursive check-recursive installcheck-recursive info-recursive \ +dvi-recursive mostlyclean-recursive distclean-recursive clean-recursive \ +maintainer-clean-recursive tags tags-recursive mostlyclean-tags \ +distclean-tags clean-tags maintainer-clean-tags distdir info-am info \ +dvi-am dvi check check-am installcheck-am installcheck install-exec-am \ +install-exec install-data-am install-data install-am install \ +uninstall-am uninstall all-redirect all-am all installdirs-am \ +installdirs mostlyclean-generic distclean-generic clean-generic \ +maintainer-clean-generic clean mostlyclean distclean maintainer-clean -.PHONY: $(RECURSIVE_TARGETS) GTAGS all all-am check check-am clean \ - clean-generic clean-libtool clean-recursive distclean \ - distclean-generic distclean-libtool distclean-recursive \ - distclean-tags distdir dvi dvi-am dvi-recursive info info-am \ - info-recursive install install-am install-data install-data-am \ - install-data-recursive install-exec install-exec-am \ - install-exec-recursive install-info install-info-am \ - install-info-recursive install-man install-recursive \ - install-strip install-tse3listenhHEADERS installcheck \ - installcheck-am installdirs installdirs-am \ - installdirs-recursive maintainer-clean maintainer-clean-generic \ - maintainer-clean-recursive mostlyclean mostlyclean-generic \ - mostlyclean-libtool mostlyclean-recursive tags tags-recursive \ - uninstall uninstall-am uninstall-info-am \ - uninstall-info-recursive uninstall-recursive \ - uninstall-tse3listenhHEADERS # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. --- tse3-0.2.7.orig/src/tse3/plt/Makefile.in +++ tse3-0.2.7/src/tse3/plt/Makefile.in @@ -1,8 +1,6 @@ -# Makefile.in generated by automake 1.6.3 from Makefile.am. -# @configure_input@ +# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am -# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 -# Free Software Foundation, Inc. +# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. @@ -12,7 +10,7 @@ # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. -@SET_MAKE@ + SHELL = @SHELL@ srcdir = @srcdir@ @@ -33,9 +31,13 @@ mandir = @mandir@ includedir = @includedir@ oldincludedir = /usr/include + +DESTDIR = + pkgdatadir = $(datadir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ + top_builddir = ../../.. ACLOCAL = @ACLOCAL@ @@ -43,16 +45,12 @@ AUTOMAKE = @AUTOMAKE@ AUTOHEADER = @AUTOHEADER@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd INSTALL = @INSTALL@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS) INSTALL_DATA = @INSTALL_DATA@ -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_HEADER = $(INSTALL_DATA) transform = @program_transform_name@ + NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : @@ -61,29 +59,34 @@ POST_UNINSTALL = : host_alias = @host_alias@ host_triplet = @host@ - -EXEEXT = @EXEEXT@ -OBJEXT = @OBJEXT@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -AMTAR = @AMTAR@ +AR = @AR@ AS = @AS@ -AWK = @AWK@ CC = @CC@ CPP = @CPP@ CPP_MM = @CPP_MM@ CXX = @CXX@ -DEPDIR = @DEPDIR@ +CXXCPP = @CXXCPP@ DLLTOOL = @DLLTOOL@ ECHO = @ECHO@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +EGREP = @EGREP@ +EXEEXT = @EXEEXT@ +F77 = @F77@ +GCJ = @GCJ@ +GCJFLAGS = @GCJFLAGS@ +HAVE_LIB = @HAVE_LIB@ +LIB = @LIB@ LIBARTS = @LIBARTS@ LIBASOUND = @LIBASOUND@ LIBTOOL = @LIBTOOL@ LIBTOOL_DEPS = @LIBTOOL_DEPS@ LN_S = @LN_S@ +LTLIB = @LTLIB@ +MAKEINFO = @MAKEINFO@ OBJDUMP = @OBJDUMP@ +OBJEXT = @OBJEXT@ PACKAGE = @PACKAGE@ RANLIB = @RANLIB@ +RC = @RC@ STRIP = @STRIP@ TSE3_ALSA_PREFIX = @TSE3_ALSA_PREFIX@ TSE3_ALSA_VERSION = @TSE3_ALSA_VERSION@ @@ -95,9 +98,6 @@ TSE3_WITH_OSS = @TSE3_WITH_OSS@ TSE3_WITH_WIN32 = @TSE3_WITH_WIN32@ VERSION = @VERSION@ -am__include = @am__include@ -am__quote = @am__quote@ -install_sh = @install_sh@ tse3plth_HEADERS = Alsa.h OSS.h RiscOS.h Factory.h Win32.h Arts.h RiscOS.cpp Win32.cpp $(tse3plth_HEADERS_arts) $(tse3plth_HEADERS_win32) tse3plthdir = $(pkgincludedir)/plt @@ -108,27 +108,14 @@ EXTRA_DIST = Arts.cpp Win32.cpp RiscOS.cpp Factory_Unix.cpp Factory_Win32.cpp Alsa-0.5.cpp Alsa-0.9.cpp midiswis.h DISTCLEANFILES = ./.deps/* ./.deps/.P - INCLUDES = -I$(top_srcdir)/src $(INCLUDES_arts) $(INCLUDES_win32) - - -############################################################################### -# Conditional on what interface support is being built in... - -# Factory @TSE3_WITH_WIN32_TRUE@libtse3plt_la_SOURCES_factory = Factory_Win32.cpp @TSE3_WITH_WIN32_FALSE@libtse3plt_la_SOURCES_factory = Factory_Unix.cpp - - -# Alsa +@TSE3_WITH_ALSA_TRUE@@TSE3_WITH_ALSA_0_5_X_TRUE@libtse3plt_la_SOURCES_alsa = Alsa-0.5.cpp +@TSE3_WITH_ALSA_TRUE@@TSE3_WITH_ALSA_0_5_X_FALSE@libtse3plt_la_SOURCES_alsa = Alsa-0.9.cpp @TSE3_WITH_ALSA_FALSE@libtse3plt_la_SOURCES_alsa = -@TSE3_WITH_ALSA_0_5_X_FALSE@@TSE3_WITH_ALSA_TRUE@libtse3plt_la_SOURCES_alsa = Alsa-0.9.cpp -@TSE3_WITH_ALSA_0_5_X_TRUE@@TSE3_WITH_ALSA_TRUE@libtse3plt_la_SOURCES_alsa = Alsa-0.5.cpp @TSE3_WITH_ALSA_TRUE@libtse3plt_la_LIBADD_alsa = $(LIBASOUND) @TSE3_WITH_ALSA_FALSE@libtse3plt_la_LIBADD_alsa = - - -# Arts @TSE3_WITH_ARTS_TRUE@tse3plth_HEADERS_arts = Arts.h @TSE3_WITH_ARTS_FALSE@tse3plth_HEADERS_arts = @TSE3_WITH_ARTS_TRUE@libtse3plt_la_SOURCES_arts = Arts.cpp @@ -138,9 +125,6 @@ @TSE3_WITH_ARTS_TRUE@INCLUDES_arts = -I$(TSE3_ARTS_PREFIX) @TSE3_WITH_ARTS_FALSE@INCLUDES_arts = libtse3plt_la_LIBADD = $(libtse3plt_la_LIBADD_alsa) $(libtse3plt_la_LIBADD_arts) $(libtse3plt_la_LIBADD_win32) - - -# Win32 (obviously, under cygwin or mingw32) @TSE3_WITH_WIN32_TRUE@tse3plth_HEADERS_win32 = Win32.h @TSE3_WITH_WIN32_FALSE@tse3plth_HEADERS_win32 = @TSE3_WITH_WIN32_TRUE@libtse3plt_la_SOURCES_win32 = Win32.cpp @@ -149,119 +133,163 @@ @TSE3_WITH_WIN32_FALSE@libtse3plt_la_LIBADD_win32 = @TSE3_WITH_WIN32_TRUE@INCLUDES_wind32 = @TSE3_WITH_WIN32_FALSE@INCLUDES_win32 = -subdir = src/tse3/plt mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = -LTLIBRARIES = $(noinst_LTLIBRARIES) - -libtse3plt_la_LDFLAGS = -@TSE3_WITH_ALSA_FALSE@@TSE3_WITH_ARTS_FALSE@@TSE3_WITH_WIN32_TRUE@libtse3plt_la_DEPENDENCIES = -@TSE3_WITH_ALSA_FALSE@@TSE3_WITH_ARTS_FALSE@@TSE3_WITH_WIN32_FALSE@libtse3plt_la_DEPENDENCIES = -@TSE3_WITH_ALSA_FALSE@@TSE3_WITH_ARTS_TRUE@@TSE3_WITH_WIN32_TRUE@libtse3plt_la_DEPENDENCIES = -@TSE3_WITH_ALSA_FALSE@@TSE3_WITH_ARTS_TRUE@@TSE3_WITH_WIN32_FALSE@libtse3plt_la_DEPENDENCIES = -@TSE3_WITH_ALSA_TRUE@@TSE3_WITH_ARTS_FALSE@@TSE3_WITH_WIN32_TRUE@libtse3plt_la_DEPENDENCIES = -@TSE3_WITH_ALSA_TRUE@@TSE3_WITH_ARTS_FALSE@@TSE3_WITH_WIN32_FALSE@libtse3plt_la_DEPENDENCIES = -@TSE3_WITH_ALSA_TRUE@@TSE3_WITH_ARTS_TRUE@@TSE3_WITH_WIN32_TRUE@libtse3plt_la_DEPENDENCIES = -@TSE3_WITH_ALSA_TRUE@@TSE3_WITH_ARTS_TRUE@@TSE3_WITH_WIN32_FALSE@libtse3plt_la_DEPENDENCIES = -@TSE3_WITH_WIN32_TRUE@am__objects_1 = Factory_Win32.lo -@TSE3_WITH_WIN32_FALSE@am__objects_1 = Factory_Unix.lo -@TSE3_WITH_ALSA_FALSE@am__objects_2 = -@TSE3_WITH_ALSA_0_5_X_FALSE@@TSE3_WITH_ALSA_TRUE@am__objects_2 = \ -@TSE3_WITH_ALSA_0_5_X_FALSE@@TSE3_WITH_ALSA_TRUE@ Alsa-0.9.lo -@TSE3_WITH_ALSA_0_5_X_TRUE@@TSE3_WITH_ALSA_TRUE@am__objects_2 = \ -@TSE3_WITH_ALSA_0_5_X_TRUE@@TSE3_WITH_ALSA_TRUE@ Alsa-0.5.lo -@TSE3_WITH_ARTS_TRUE@am__objects_3 = Arts.lo -@TSE3_WITH_ARTS_FALSE@am__objects_3 = -@TSE3_WITH_WIN32_TRUE@am__objects_4 = Win32.lo -@TSE3_WITH_WIN32_FALSE@am__objects_4 = -am_libtse3plt_la_OBJECTS = OSS.lo $(am__objects_1) $(am__objects_2) \ - $(am__objects_3) $(am__objects_4) -libtse3plt_la_OBJECTS = $(am_libtse3plt_la_OBJECTS) +CONFIG_HEADER = ../../../config.h +CONFIG_CLEAN_FILES = +LTLIBRARIES = $(noinst_LTLIBRARIES) -DEFS = @DEFS@ -DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir) + +DEFS = @DEFS@ -I. -I$(srcdir) -I../../.. CPPFLAGS = @CPPFLAGS@ LDFLAGS = @LDFLAGS@ LIBS = @LIBS@ -depcomp = $(SHELL) $(top_srcdir)/depcomp -am__depfiles_maybe = depfiles -@AMDEP_TRUE@DEP_FILES = ./$(DEPDIR)/Alsa-0.5.Plo \ -@AMDEP_TRUE@ ./$(DEPDIR)/Alsa-0.9.Plo ./$(DEPDIR)/Arts.Plo \ -@AMDEP_TRUE@ ./$(DEPDIR)/Factory_Unix.Plo \ -@AMDEP_TRUE@ ./$(DEPDIR)/Factory_Win32.Plo ./$(DEPDIR)/OSS.Plo \ -@AMDEP_TRUE@ ./$(DEPDIR)/Win32.Plo -CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ - $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -LTCXXCOMPILE = $(LIBTOOL) --mode=compile $(CXX) $(DEFS) \ - $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ - $(AM_CXXFLAGS) $(CXXFLAGS) -CXXLD = $(CXX) -CXXLINK = $(LIBTOOL) --mode=link $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) \ - $(AM_LDFLAGS) $(LDFLAGS) -o $@ +libtse3plt_la_LDFLAGS = +@TSE3_WITH_ARTS_TRUE@@TSE3_WITH_WIN32_TRUE@@TSE3_WITH_ALSA_FALSE@libtse3plt_la_DEPENDENCIES = +@TSE3_WITH_ARTS_TRUE@@TSE3_WITH_WIN32_FALSE@@TSE3_WITH_ALSA_FALSE@libtse3plt_la_DEPENDENCIES = +@TSE3_WITH_ARTS_FALSE@@TSE3_WITH_WIN32_TRUE@@TSE3_WITH_ALSA_FALSE@libtse3plt_la_DEPENDENCIES = +@TSE3_WITH_ARTS_FALSE@@TSE3_WITH_WIN32_FALSE@@TSE3_WITH_ALSA_TRUE@libtse3plt_la_DEPENDENCIES = +@TSE3_WITH_ARTS_FALSE@@TSE3_WITH_WIN32_FALSE@@TSE3_WITH_ALSA_FALSE@libtse3plt_la_DEPENDENCIES = +@TSE3_WITH_ARTS_TRUE@@TSE3_WITH_WIN32_FALSE@@TSE3_WITH_ALSA_TRUE@libtse3plt_la_DEPENDENCIES = +@TSE3_WITH_ARTS_TRUE@@TSE3_WITH_WIN32_TRUE@@TSE3_WITH_ALSA_TRUE@libtse3plt_la_DEPENDENCIES = +@TSE3_WITH_ARTS_FALSE@@TSE3_WITH_WIN32_TRUE@@TSE3_WITH_ALSA_TRUE@libtse3plt_la_DEPENDENCIES = +@TSE3_WITH_ALSA_0_5_X_FALSE@@TSE3_WITH_ARTS_FALSE@@TSE3_WITH_ALSA_TRUE@@TSE3_WITH_WIN32_FALSE@libtse3plt_la_OBJECTS = \ +@TSE3_WITH_ALSA_0_5_X_FALSE@@TSE3_WITH_ARTS_FALSE@@TSE3_WITH_ALSA_TRUE@@TSE3_WITH_WIN32_FALSE@OSS.lo \ +@TSE3_WITH_ALSA_0_5_X_FALSE@@TSE3_WITH_ARTS_FALSE@@TSE3_WITH_ALSA_TRUE@@TSE3_WITH_WIN32_FALSE@Factory_Unix.lo \ +@TSE3_WITH_ALSA_0_5_X_FALSE@@TSE3_WITH_ARTS_FALSE@@TSE3_WITH_ALSA_TRUE@@TSE3_WITH_WIN32_FALSE@Alsa-0.9.lo +@TSE3_WITH_ALSA_0_5_X_TRUE@@TSE3_WITH_ARTS_FALSE@@TSE3_WITH_ALSA_TRUE@@TSE3_WITH_WIN32_FALSE@libtse3plt_la_OBJECTS = \ +@TSE3_WITH_ALSA_0_5_X_TRUE@@TSE3_WITH_ARTS_FALSE@@TSE3_WITH_ALSA_TRUE@@TSE3_WITH_WIN32_FALSE@OSS.lo \ +@TSE3_WITH_ALSA_0_5_X_TRUE@@TSE3_WITH_ARTS_FALSE@@TSE3_WITH_ALSA_TRUE@@TSE3_WITH_WIN32_FALSE@Factory_Unix.lo \ +@TSE3_WITH_ALSA_0_5_X_TRUE@@TSE3_WITH_ARTS_FALSE@@TSE3_WITH_ALSA_TRUE@@TSE3_WITH_WIN32_FALSE@Alsa-0.5.lo +@TSE3_WITH_ALSA_0_5_X_TRUE@@TSE3_WITH_ARTS_TRUE@@TSE3_WITH_ALSA_TRUE@@TSE3_WITH_WIN32_TRUE@libtse3plt_la_OBJECTS = \ +@TSE3_WITH_ALSA_0_5_X_TRUE@@TSE3_WITH_ARTS_TRUE@@TSE3_WITH_ALSA_TRUE@@TSE3_WITH_WIN32_TRUE@OSS.lo \ +@TSE3_WITH_ALSA_0_5_X_TRUE@@TSE3_WITH_ARTS_TRUE@@TSE3_WITH_ALSA_TRUE@@TSE3_WITH_WIN32_TRUE@Factory_Win32.lo \ +@TSE3_WITH_ALSA_0_5_X_TRUE@@TSE3_WITH_ARTS_TRUE@@TSE3_WITH_ALSA_TRUE@@TSE3_WITH_WIN32_TRUE@Alsa-0.5.lo \ +@TSE3_WITH_ALSA_0_5_X_TRUE@@TSE3_WITH_ARTS_TRUE@@TSE3_WITH_ALSA_TRUE@@TSE3_WITH_WIN32_TRUE@Arts.lo \ +@TSE3_WITH_ALSA_0_5_X_TRUE@@TSE3_WITH_ARTS_TRUE@@TSE3_WITH_ALSA_TRUE@@TSE3_WITH_WIN32_TRUE@Win32.lo +@TSE3_WITH_ALSA_0_5_X_TRUE@@TSE3_WITH_ARTS_TRUE@@TSE3_WITH_ALSA_FALSE@@TSE3_WITH_WIN32_TRUE@libtse3plt_la_OBJECTS = \ +@TSE3_WITH_ALSA_0_5_X_TRUE@@TSE3_WITH_ARTS_TRUE@@TSE3_WITH_ALSA_FALSE@@TSE3_WITH_WIN32_TRUE@OSS.lo \ +@TSE3_WITH_ALSA_0_5_X_TRUE@@TSE3_WITH_ARTS_TRUE@@TSE3_WITH_ALSA_FALSE@@TSE3_WITH_WIN32_TRUE@Factory_Win32.lo \ +@TSE3_WITH_ALSA_0_5_X_TRUE@@TSE3_WITH_ARTS_TRUE@@TSE3_WITH_ALSA_FALSE@@TSE3_WITH_WIN32_TRUE@Arts.lo \ +@TSE3_WITH_ALSA_0_5_X_TRUE@@TSE3_WITH_ARTS_TRUE@@TSE3_WITH_ALSA_FALSE@@TSE3_WITH_WIN32_TRUE@Win32.lo +@TSE3_WITH_ALSA_0_5_X_FALSE@@TSE3_WITH_ARTS_TRUE@@TSE3_WITH_ALSA_TRUE@@TSE3_WITH_WIN32_FALSE@libtse3plt_la_OBJECTS = \ +@TSE3_WITH_ALSA_0_5_X_FALSE@@TSE3_WITH_ARTS_TRUE@@TSE3_WITH_ALSA_TRUE@@TSE3_WITH_WIN32_FALSE@OSS.lo \ +@TSE3_WITH_ALSA_0_5_X_FALSE@@TSE3_WITH_ARTS_TRUE@@TSE3_WITH_ALSA_TRUE@@TSE3_WITH_WIN32_FALSE@Factory_Unix.lo \ +@TSE3_WITH_ALSA_0_5_X_FALSE@@TSE3_WITH_ARTS_TRUE@@TSE3_WITH_ALSA_TRUE@@TSE3_WITH_WIN32_FALSE@Alsa-0.9.lo \ +@TSE3_WITH_ALSA_0_5_X_FALSE@@TSE3_WITH_ARTS_TRUE@@TSE3_WITH_ALSA_TRUE@@TSE3_WITH_WIN32_FALSE@Arts.lo +@TSE3_WITH_ALSA_0_5_X_FALSE@@TSE3_WITH_ARTS_FALSE@@TSE3_WITH_ALSA_TRUE@@TSE3_WITH_WIN32_TRUE@libtse3plt_la_OBJECTS = \ +@TSE3_WITH_ALSA_0_5_X_FALSE@@TSE3_WITH_ARTS_FALSE@@TSE3_WITH_ALSA_TRUE@@TSE3_WITH_WIN32_TRUE@OSS.lo \ +@TSE3_WITH_ALSA_0_5_X_FALSE@@TSE3_WITH_ARTS_FALSE@@TSE3_WITH_ALSA_TRUE@@TSE3_WITH_WIN32_TRUE@Factory_Win32.lo \ +@TSE3_WITH_ALSA_0_5_X_FALSE@@TSE3_WITH_ARTS_FALSE@@TSE3_WITH_ALSA_TRUE@@TSE3_WITH_WIN32_TRUE@Alsa-0.9.lo \ +@TSE3_WITH_ALSA_0_5_X_FALSE@@TSE3_WITH_ARTS_FALSE@@TSE3_WITH_ALSA_TRUE@@TSE3_WITH_WIN32_TRUE@Win32.lo +@TSE3_WITH_ALSA_0_5_X_TRUE@@TSE3_WITH_ARTS_FALSE@@TSE3_WITH_ALSA_TRUE@@TSE3_WITH_WIN32_TRUE@libtse3plt_la_OBJECTS = \ +@TSE3_WITH_ALSA_0_5_X_TRUE@@TSE3_WITH_ARTS_FALSE@@TSE3_WITH_ALSA_TRUE@@TSE3_WITH_WIN32_TRUE@OSS.lo \ +@TSE3_WITH_ALSA_0_5_X_TRUE@@TSE3_WITH_ARTS_FALSE@@TSE3_WITH_ALSA_TRUE@@TSE3_WITH_WIN32_TRUE@Factory_Win32.lo \ +@TSE3_WITH_ALSA_0_5_X_TRUE@@TSE3_WITH_ARTS_FALSE@@TSE3_WITH_ALSA_TRUE@@TSE3_WITH_WIN32_TRUE@Alsa-0.5.lo \ +@TSE3_WITH_ALSA_0_5_X_TRUE@@TSE3_WITH_ARTS_FALSE@@TSE3_WITH_ALSA_TRUE@@TSE3_WITH_WIN32_TRUE@Win32.lo +@TSE3_WITH_ALSA_0_5_X_TRUE@@TSE3_WITH_ARTS_FALSE@@TSE3_WITH_ALSA_FALSE@@TSE3_WITH_WIN32_FALSE@libtse3plt_la_OBJECTS = \ +@TSE3_WITH_ALSA_0_5_X_TRUE@@TSE3_WITH_ARTS_FALSE@@TSE3_WITH_ALSA_FALSE@@TSE3_WITH_WIN32_FALSE@OSS.lo \ +@TSE3_WITH_ALSA_0_5_X_TRUE@@TSE3_WITH_ARTS_FALSE@@TSE3_WITH_ALSA_FALSE@@TSE3_WITH_WIN32_FALSE@Factory_Unix.lo +@TSE3_WITH_ALSA_0_5_X_FALSE@@TSE3_WITH_ARTS_TRUE@@TSE3_WITH_ALSA_FALSE@@TSE3_WITH_WIN32_FALSE@libtse3plt_la_OBJECTS = \ +@TSE3_WITH_ALSA_0_5_X_FALSE@@TSE3_WITH_ARTS_TRUE@@TSE3_WITH_ALSA_FALSE@@TSE3_WITH_WIN32_FALSE@OSS.lo \ +@TSE3_WITH_ALSA_0_5_X_FALSE@@TSE3_WITH_ARTS_TRUE@@TSE3_WITH_ALSA_FALSE@@TSE3_WITH_WIN32_FALSE@Factory_Unix.lo \ +@TSE3_WITH_ALSA_0_5_X_FALSE@@TSE3_WITH_ARTS_TRUE@@TSE3_WITH_ALSA_FALSE@@TSE3_WITH_WIN32_FALSE@Arts.lo +@TSE3_WITH_ALSA_0_5_X_FALSE@@TSE3_WITH_ARTS_FALSE@@TSE3_WITH_ALSA_FALSE@@TSE3_WITH_WIN32_FALSE@libtse3plt_la_OBJECTS = \ +@TSE3_WITH_ALSA_0_5_X_FALSE@@TSE3_WITH_ARTS_FALSE@@TSE3_WITH_ALSA_FALSE@@TSE3_WITH_WIN32_FALSE@OSS.lo \ +@TSE3_WITH_ALSA_0_5_X_FALSE@@TSE3_WITH_ARTS_FALSE@@TSE3_WITH_ALSA_FALSE@@TSE3_WITH_WIN32_FALSE@Factory_Unix.lo +@TSE3_WITH_ALSA_0_5_X_FALSE@@TSE3_WITH_ARTS_FALSE@@TSE3_WITH_ALSA_FALSE@@TSE3_WITH_WIN32_TRUE@libtse3plt_la_OBJECTS = \ +@TSE3_WITH_ALSA_0_5_X_FALSE@@TSE3_WITH_ARTS_FALSE@@TSE3_WITH_ALSA_FALSE@@TSE3_WITH_WIN32_TRUE@OSS.lo \ +@TSE3_WITH_ALSA_0_5_X_FALSE@@TSE3_WITH_ARTS_FALSE@@TSE3_WITH_ALSA_FALSE@@TSE3_WITH_WIN32_TRUE@Factory_Win32.lo \ +@TSE3_WITH_ALSA_0_5_X_FALSE@@TSE3_WITH_ARTS_FALSE@@TSE3_WITH_ALSA_FALSE@@TSE3_WITH_WIN32_TRUE@Win32.lo +@TSE3_WITH_ALSA_0_5_X_FALSE@@TSE3_WITH_ARTS_TRUE@@TSE3_WITH_ALSA_FALSE@@TSE3_WITH_WIN32_TRUE@libtse3plt_la_OBJECTS = \ +@TSE3_WITH_ALSA_0_5_X_FALSE@@TSE3_WITH_ARTS_TRUE@@TSE3_WITH_ALSA_FALSE@@TSE3_WITH_WIN32_TRUE@OSS.lo \ +@TSE3_WITH_ALSA_0_5_X_FALSE@@TSE3_WITH_ARTS_TRUE@@TSE3_WITH_ALSA_FALSE@@TSE3_WITH_WIN32_TRUE@Factory_Win32.lo \ +@TSE3_WITH_ALSA_0_5_X_FALSE@@TSE3_WITH_ARTS_TRUE@@TSE3_WITH_ALSA_FALSE@@TSE3_WITH_WIN32_TRUE@Arts.lo \ +@TSE3_WITH_ALSA_0_5_X_FALSE@@TSE3_WITH_ARTS_TRUE@@TSE3_WITH_ALSA_FALSE@@TSE3_WITH_WIN32_TRUE@Win32.lo +@TSE3_WITH_ALSA_0_5_X_TRUE@@TSE3_WITH_ARTS_TRUE@@TSE3_WITH_ALSA_TRUE@@TSE3_WITH_WIN32_FALSE@libtse3plt_la_OBJECTS = \ +@TSE3_WITH_ALSA_0_5_X_TRUE@@TSE3_WITH_ARTS_TRUE@@TSE3_WITH_ALSA_TRUE@@TSE3_WITH_WIN32_FALSE@OSS.lo \ +@TSE3_WITH_ALSA_0_5_X_TRUE@@TSE3_WITH_ARTS_TRUE@@TSE3_WITH_ALSA_TRUE@@TSE3_WITH_WIN32_FALSE@Factory_Unix.lo \ +@TSE3_WITH_ALSA_0_5_X_TRUE@@TSE3_WITH_ARTS_TRUE@@TSE3_WITH_ALSA_TRUE@@TSE3_WITH_WIN32_FALSE@Alsa-0.5.lo \ +@TSE3_WITH_ALSA_0_5_X_TRUE@@TSE3_WITH_ARTS_TRUE@@TSE3_WITH_ALSA_TRUE@@TSE3_WITH_WIN32_FALSE@Arts.lo +@TSE3_WITH_ALSA_0_5_X_FALSE@@TSE3_WITH_ARTS_TRUE@@TSE3_WITH_ALSA_TRUE@@TSE3_WITH_WIN32_TRUE@libtse3plt_la_OBJECTS = \ +@TSE3_WITH_ALSA_0_5_X_FALSE@@TSE3_WITH_ARTS_TRUE@@TSE3_WITH_ALSA_TRUE@@TSE3_WITH_WIN32_TRUE@OSS.lo \ +@TSE3_WITH_ALSA_0_5_X_FALSE@@TSE3_WITH_ARTS_TRUE@@TSE3_WITH_ALSA_TRUE@@TSE3_WITH_WIN32_TRUE@Factory_Win32.lo \ +@TSE3_WITH_ALSA_0_5_X_FALSE@@TSE3_WITH_ARTS_TRUE@@TSE3_WITH_ALSA_TRUE@@TSE3_WITH_WIN32_TRUE@Alsa-0.9.lo \ +@TSE3_WITH_ALSA_0_5_X_FALSE@@TSE3_WITH_ARTS_TRUE@@TSE3_WITH_ALSA_TRUE@@TSE3_WITH_WIN32_TRUE@Arts.lo \ +@TSE3_WITH_ALSA_0_5_X_FALSE@@TSE3_WITH_ARTS_TRUE@@TSE3_WITH_ALSA_TRUE@@TSE3_WITH_WIN32_TRUE@Win32.lo +@TSE3_WITH_ALSA_0_5_X_TRUE@@TSE3_WITH_ARTS_FALSE@@TSE3_WITH_ALSA_FALSE@@TSE3_WITH_WIN32_TRUE@libtse3plt_la_OBJECTS = \ +@TSE3_WITH_ALSA_0_5_X_TRUE@@TSE3_WITH_ARTS_FALSE@@TSE3_WITH_ALSA_FALSE@@TSE3_WITH_WIN32_TRUE@OSS.lo \ +@TSE3_WITH_ALSA_0_5_X_TRUE@@TSE3_WITH_ARTS_FALSE@@TSE3_WITH_ALSA_FALSE@@TSE3_WITH_WIN32_TRUE@Factory_Win32.lo \ +@TSE3_WITH_ALSA_0_5_X_TRUE@@TSE3_WITH_ARTS_FALSE@@TSE3_WITH_ALSA_FALSE@@TSE3_WITH_WIN32_TRUE@Win32.lo +@TSE3_WITH_ALSA_0_5_X_TRUE@@TSE3_WITH_ARTS_TRUE@@TSE3_WITH_ALSA_FALSE@@TSE3_WITH_WIN32_FALSE@libtse3plt_la_OBJECTS = \ +@TSE3_WITH_ALSA_0_5_X_TRUE@@TSE3_WITH_ARTS_TRUE@@TSE3_WITH_ALSA_FALSE@@TSE3_WITH_WIN32_FALSE@OSS.lo \ +@TSE3_WITH_ALSA_0_5_X_TRUE@@TSE3_WITH_ARTS_TRUE@@TSE3_WITH_ALSA_FALSE@@TSE3_WITH_WIN32_FALSE@Factory_Unix.lo \ +@TSE3_WITH_ALSA_0_5_X_TRUE@@TSE3_WITH_ARTS_TRUE@@TSE3_WITH_ALSA_FALSE@@TSE3_WITH_WIN32_FALSE@Arts.lo CXXFLAGS = @CXXFLAGS@ -DIST_SOURCES = $(libtse3plt_la_SOURCES) -HEADERS = $(tse3plth_HEADERS) +CXXCOMPILE = $(CXX) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) +LTCXXCOMPILE = $(LIBTOOL) --mode=compile $(CXX) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) +CXXLD = $(CXX) +CXXLINK = $(LIBTOOL) --mode=link $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) $(LDFLAGS) -o $@ +HEADERS = $(tse3plth_HEADERS) -DIST_COMMON = README $(tse3plth_HEADERS) Makefile.am Makefile.in -SOURCES = $(libtse3plt_la_SOURCES) +DIST_COMMON = README Makefile.am Makefile.in -all: all-am +DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) + +TAR = tar +GZIP_ENV = --best +DEP_FILES = .deps/Alsa-0.5.P .deps/Alsa-0.9.P .deps/Arts.P \ +.deps/Factory_Unix.P .deps/Factory_Win32.P .deps/OSS.P .deps/Win32.P +SOURCES = $(libtse3plt_la_SOURCES) +OBJECTS = $(libtse3plt_la_OBJECTS) + +all: all-redirect .SUFFIXES: -.SUFFIXES: .cpp .lo .o .obj -$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) - cd $(top_srcdir) && \ - $(AUTOMAKE) --gnu src/tse3/plt/Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe) +.SUFFIXES: .S .c .cpp .lo .o .obj .s +$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) + cd $(top_srcdir) && $(AUTOMAKE) --gnu src/tse3/plt/Makefile + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES) + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status + + +mostlyclean-noinstLTLIBRARIES: clean-noinstLTLIBRARIES: -test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES) - @list='$(noinst_LTLIBRARIES)'; for p in $$list; do \ - dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \ - test -z "$dir" && dir=.; \ - echo "rm -f \"$${dir}/so_locations\""; \ - rm -f "$${dir}/so_locations"; \ - done -libtse3plt.la: $(libtse3plt_la_OBJECTS) $(libtse3plt_la_DEPENDENCIES) - $(CXXLINK) $(libtse3plt_la_LDFLAGS) $(libtse3plt_la_OBJECTS) $(libtse3plt_la_LIBADD) $(LIBS) + +distclean-noinstLTLIBRARIES: + +maintainer-clean-noinstLTLIBRARIES: + +# FIXME: We should only use cygpath when building on Windows, +# and only if it is available. +.c.obj: + $(COMPILE) -c `cygpath -w $<` + +.s.o: + $(COMPILE) -c $< + +.S.o: + $(COMPILE) -c $< mostlyclean-compile: - -rm -f *.$(OBJEXT) core *.core + -rm -f *.o core *.core + -rm -f *.$(OBJEXT) + +clean-compile: distclean-compile: -rm -f *.tab.c -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/Alsa-0.5.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/Alsa-0.9.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/Arts.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/Factory_Unix.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/Factory_Win32.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/OSS.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/Win32.Plo@am__quote@ - -distclean-depend: - -rm -rf ./$(DEPDIR) +maintainer-clean-compile: -.cpp.o: -@AMDEP_TRUE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@ -@AMDEP_TRUE@ $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - $(CXXCOMPILE) -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$< +.s.lo: + $(LIBTOOL) --mode=compile $(COMPILE) -c $< -.cpp.obj: -@AMDEP_TRUE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@ -@AMDEP_TRUE@ $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - $(CXXCOMPILE) -c -o $@ `cygpath -w $<` - -.cpp.lo: -@AMDEP_TRUE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ -@AMDEP_TRUE@ depfile='$(DEPDIR)/$*.Plo' tmpdepfile='$(DEPDIR)/$*.TPlo' @AMDEPBACKSLASH@ -@AMDEP_TRUE@ $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - $(LTCXXCOMPILE) -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$< -CXXDEPMODE = @CXXDEPMODE@ +.S.lo: + $(LIBTOOL) --mode=compile $(COMPILE) -c $< mostlyclean-libtool: -rm -f *.lo @@ -270,170 +298,211 @@ -rm -rf .libs _libs distclean-libtool: - -rm -f libtool -uninstall-info-am: -tse3plthHEADERS_INSTALL = $(INSTALL_HEADER) + +maintainer-clean-libtool: + +libtse3plt.la: $(libtse3plt_la_OBJECTS) $(libtse3plt_la_DEPENDENCIES) + $(CXXLINK) $(libtse3plt_la_LDFLAGS) $(libtse3plt_la_OBJECTS) $(libtse3plt_la_LIBADD) $(LIBS) +.cpp.o: + $(CXXCOMPILE) -c $< +.cpp.obj: + $(CXXCOMPILE) -c `cygpath -w $<` +.cpp.lo: + $(LTCXXCOMPILE) -c $< + install-tse3plthHEADERS: $(tse3plth_HEADERS) @$(NORMAL_INSTALL) $(mkinstalldirs) $(DESTDIR)$(tse3plthdir) @list='$(tse3plth_HEADERS)'; for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - f="`echo $$p | sed -e 's|^.*/||'`"; \ - echo " $(tse3plthHEADERS_INSTALL) $$d$$p $(DESTDIR)$(tse3plthdir)/$$f"; \ - $(tse3plthHEADERS_INSTALL) $$d$$p $(DESTDIR)$(tse3plthdir)/$$f; \ + if test -f "$$p"; then d= ; else d="$(srcdir)/"; fi; \ + echo " $(INSTALL_DATA) $$d$$p $(DESTDIR)$(tse3plthdir)/$$p"; \ + $(INSTALL_DATA) $$d$$p $(DESTDIR)$(tse3plthdir)/$$p; \ done uninstall-tse3plthHEADERS: @$(NORMAL_UNINSTALL) - @list='$(tse3plth_HEADERS)'; for p in $$list; do \ - f="`echo $$p | sed -e 's|^.*/||'`"; \ - echo " rm -f $(DESTDIR)$(tse3plthdir)/$$f"; \ - rm -f $(DESTDIR)$(tse3plthdir)/$$f; \ + list='$(tse3plth_HEADERS)'; for p in $$list; do \ + rm -f $(DESTDIR)$(tse3plthdir)/$$p; \ done -ETAGS = etags -ETAGSFLAGS = - tags: TAGS -ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ +ID: $(HEADERS) $(SOURCES) $(LISP) + list='$(SOURCES) $(HEADERS)'; \ + unique=`for i in $$list; do echo $$i; done | \ + awk ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ - mkid -fID $$unique + here=`pwd` && cd $(srcdir) \ + && mkid -f$$here/ID $$unique $(LISP) -TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) +TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP) tags=; \ here=`pwd`; \ - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ + list='$(SOURCES) $(HEADERS)'; \ + unique=`for i in $$list; do echo $$i; done | \ + awk ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ - test -z "$(ETAGS_ARGS)$$tags$$unique" \ - || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$tags $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && cd $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) $$here + test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \ + || (cd $(srcdir) && etags -o $$here/TAGS $(ETAGS_ARGS) $$tags $$unique $(LISP)) + +mostlyclean-tags: + +clean-tags: distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) + -rm -f TAGS ID -top_distdir = ../../.. -distdir = $(top_distdir)/$(PACKAGE)-$(VERSION) +maintainer-clean-tags: + +distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir) + +subdir = src/tse3/plt distdir: $(DISTFILES) - @list='$(DISTFILES)'; for file in $$list; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test "$$dir" != "$$file" && test "$$dir" != "."; then \ - dir="/$$dir"; \ - $(mkinstalldirs) "$(distdir)$$dir"; \ - else \ - dir=''; \ - fi; \ + here=`cd $(top_builddir) && pwd`; \ + top_distdir=`cd $(top_distdir) && pwd`; \ + distdir=`cd $(distdir) && pwd`; \ + cd $(top_srcdir) \ + && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu src/tse3/plt/Makefile + @for file in $(DISTFILES); do \ + d=$(srcdir); \ if test -d $$d/$$file; then \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ - fi; \ - cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + cp -pr $$d/$$file $(distdir)/$$file; \ else \ test -f $(distdir)/$$file \ - || cp -p $$d/$$file $(distdir)/$$file \ - || exit 1; \ + || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ + || cp -p $$d/$$file $(distdir)/$$file || :; \ fi; \ done -check-am: all-am -check: check-am -all-am: Makefile $(LTLIBRARIES) $(HEADERS) -installdirs: - $(mkinstalldirs) $(DESTDIR)$(tse3plthdir) +DEPS_MAGIC := $(shell mkdir .deps > /dev/null 2>&1 || :) -install: install-am +-include $(DEP_FILES) + +mostlyclean-depend: + +clean-depend: + +distclean-depend: + -rm -rf .deps + +maintainer-clean-depend: + +%.o: %.c + @echo '$(COMPILE) -c $<'; \ + $(COMPILE) -Wp,-MD,.deps/$(*F).pp -c $< + @-cp .deps/$(*F).pp .deps/$(*F).P; \ + tr ' ' '\012' < .deps/$(*F).pp \ + | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \ + >> .deps/$(*F).P; \ + rm .deps/$(*F).pp + +%.lo: %.c + @echo '$(LTCOMPILE) -c $<'; \ + $(LTCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $< + @-sed -e 's/^\([^:]*\)\.o[ ]*:/\1.lo \1.o :/' \ + < .deps/$(*F).pp > .deps/$(*F).P; \ + tr ' ' '\012' < .deps/$(*F).pp \ + | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \ + >> .deps/$(*F).P; \ + rm -f .deps/$(*F).pp + +%.o: %.cpp + @echo '$(CXXCOMPILE) -c $<'; \ + $(CXXCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $< + @-cp .deps/$(*F).pp .deps/$(*F).P; \ + tr ' ' '\012' < .deps/$(*F).pp \ + | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \ + >> .deps/$(*F).P; \ + rm .deps/$(*F).pp + +%.lo: %.cpp + @echo '$(LTCXXCOMPILE) -c $<'; \ + $(LTCXXCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $< + @-sed -e 's/^\([^:]*\)\.o[ ]*:/\1.lo \1.o :/' \ + < .deps/$(*F).pp > .deps/$(*F).P; \ + tr ' ' '\012' < .deps/$(*F).pp \ + | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \ + >> .deps/$(*F).P; \ + rm -f .deps/$(*F).pp +info-am: +info: info-am +dvi-am: +dvi: dvi-am +check-am: all-am +check: check-am +installcheck-am: +installcheck: installcheck-am +install-exec-am: install-exec: install-exec-am + +install-data-am: install-tse3plthHEADERS install-data: install-data-am -uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am +install: install-am +uninstall-am: uninstall-tse3plthHEADERS +uninstall: uninstall-am +all-am: Makefile $(LTLIBRARIES) $(HEADERS) +all-redirect: all-am install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install + $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install +installdirs: + $(mkinstalldirs) $(DESTDIR)$(tse3plthdir) + + mostlyclean-generic: clean-generic: distclean-generic: -rm -f Makefile $(CONFIG_CLEAN_FILES) + -rm -f config.cache config.log stamp-h stamp-h[0-9]* -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES) maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-am +mostlyclean-am: mostlyclean-noinstLTLIBRARIES mostlyclean-compile \ + mostlyclean-libtool mostlyclean-tags mostlyclean-depend \ + mostlyclean-generic -clean-am: clean-generic clean-libtool clean-noinstLTLIBRARIES \ - mostlyclean-am - -distclean: distclean-am - -distclean-am: clean-am distclean-compile distclean-depend \ - distclean-generic distclean-libtool distclean-tags - -dvi: dvi-am - -dvi-am: - -info: info-am - -info-am: +mostlyclean: mostlyclean-am -install-data-am: install-tse3plthHEADERS +clean-am: clean-noinstLTLIBRARIES clean-compile clean-libtool \ + clean-tags clean-depend clean-generic mostlyclean-am -install-exec-am: +clean: clean-am -install-info: install-info-am +distclean-am: distclean-noinstLTLIBRARIES distclean-compile \ + distclean-libtool distclean-tags distclean-depend \ + distclean-generic clean-am + -rm -f libtool -install-man: +distclean: distclean-am -installcheck-am: +maintainer-clean-am: maintainer-clean-noinstLTLIBRARIES \ + maintainer-clean-compile maintainer-clean-libtool \ + maintainer-clean-tags maintainer-clean-depend \ + maintainer-clean-generic distclean-am + @echo "This command is intended for maintainers to use;" + @echo "it deletes files that may require special tools to rebuild." maintainer-clean: maintainer-clean-am -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-compile mostlyclean-generic \ - mostlyclean-libtool - -uninstall-am: uninstall-info-am uninstall-tse3plthHEADERS +.PHONY: mostlyclean-noinstLTLIBRARIES distclean-noinstLTLIBRARIES \ +clean-noinstLTLIBRARIES maintainer-clean-noinstLTLIBRARIES \ +mostlyclean-compile distclean-compile clean-compile \ +maintainer-clean-compile mostlyclean-libtool distclean-libtool \ +clean-libtool maintainer-clean-libtool uninstall-tse3plthHEADERS \ +install-tse3plthHEADERS tags mostlyclean-tags distclean-tags clean-tags \ +maintainer-clean-tags distdir mostlyclean-depend distclean-depend \ +clean-depend maintainer-clean-depend info-am info dvi-am dvi check \ +check-am installcheck-am installcheck install-exec-am install-exec \ +install-data-am install-data install-am install uninstall-am uninstall \ +all-redirect all-am all installdirs mostlyclean-generic \ +distclean-generic clean-generic maintainer-clean-generic clean \ +mostlyclean distclean maintainer-clean -.PHONY: GTAGS all all-am check check-am clean clean-generic \ - clean-libtool clean-noinstLTLIBRARIES distclean \ - distclean-compile distclean-depend distclean-generic \ - distclean-libtool distclean-tags distdir dvi dvi-am info \ - info-am install install-am install-data install-data-am \ - install-exec install-exec-am install-info install-info-am \ - install-man install-strip install-tse3plthHEADERS installcheck \ - installcheck-am installdirs maintainer-clean \ - maintainer-clean-generic mostlyclean mostlyclean-compile \ - mostlyclean-generic mostlyclean-libtool tags uninstall \ - uninstall-am uninstall-info-am uninstall-tse3plthHEADERS # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. --- tse3-0.2.7.orig/src/tse3/util/Makefile.in +++ tse3-0.2.7/src/tse3/util/Makefile.in @@ -1,8 +1,6 @@ -# Makefile.in generated by automake 1.6.3 from Makefile.am. -# @configure_input@ +# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am -# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 -# Free Software Foundation, Inc. +# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. @@ -12,7 +10,7 @@ # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. -@SET_MAKE@ + SHELL = @SHELL@ srcdir = @srcdir@ @@ -33,9 +31,13 @@ mandir = @mandir@ includedir = @includedir@ oldincludedir = /usr/include + +DESTDIR = + pkgdatadir = $(datadir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ + top_builddir = ../../.. ACLOCAL = @ACLOCAL@ @@ -43,16 +45,12 @@ AUTOMAKE = @AUTOMAKE@ AUTOHEADER = @AUTOHEADER@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd INSTALL = @INSTALL@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS) INSTALL_DATA = @INSTALL_DATA@ -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_HEADER = $(INSTALL_DATA) transform = @program_transform_name@ + NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : @@ -61,29 +59,34 @@ POST_UNINSTALL = : host_alias = @host_alias@ host_triplet = @host@ - -EXEEXT = @EXEEXT@ -OBJEXT = @OBJEXT@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -AMTAR = @AMTAR@ +AR = @AR@ AS = @AS@ -AWK = @AWK@ CC = @CC@ CPP = @CPP@ CPP_MM = @CPP_MM@ CXX = @CXX@ -DEPDIR = @DEPDIR@ +CXXCPP = @CXXCPP@ DLLTOOL = @DLLTOOL@ ECHO = @ECHO@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +EGREP = @EGREP@ +EXEEXT = @EXEEXT@ +F77 = @F77@ +GCJ = @GCJ@ +GCJFLAGS = @GCJFLAGS@ +HAVE_LIB = @HAVE_LIB@ +LIB = @LIB@ LIBARTS = @LIBARTS@ LIBASOUND = @LIBASOUND@ LIBTOOL = @LIBTOOL@ LIBTOOL_DEPS = @LIBTOOL_DEPS@ LN_S = @LN_S@ +LTLIB = @LTLIB@ +MAKEINFO = @MAKEINFO@ OBJDUMP = @OBJDUMP@ +OBJEXT = @OBJEXT@ PACKAGE = @PACKAGE@ RANLIB = @RANLIB@ +RC = @RC@ STRIP = @STRIP@ TSE3_ALSA_PREFIX = @TSE3_ALSA_PREFIX@ TSE3_ALSA_VERSION = @TSE3_ALSA_VERSION@ @@ -95,9 +98,7 @@ TSE3_WITH_OSS = @TSE3_WITH_OSS@ TSE3_WITH_WIN32 = @TSE3_WITH_WIN32@ VERSION = @VERSION@ -am__include = @am__include@ -am__quote = @am__quote@ -install_sh = @install_sh@ + tse3utilh_HEADERS = Demidify.h MidiScheduler.h MulDiv.h NoteNumber.h Phrase.h PowerQuantise.h Song.h Snap.h Track.h tse3utilhdir = $(pkgincludedir)/util @@ -107,105 +108,87 @@ DISTCLEANFILES = ./.deps/* ./.deps/.P INCLUDES = -I$(top_srcdir)/src -subdir = src/tse3/util mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = -LTLIBRARIES = $(noinst_LTLIBRARIES) - -libtse3util_la_LDFLAGS = -libtse3util_la_LIBADD = -am_libtse3util_la_OBJECTS = Demidify.lo MidiScheduler.lo MulDiv.lo \ - NoteNumber.lo Phrase.lo PowerQuantise.lo Song.lo Snap.lo \ - Track.lo -libtse3util_la_OBJECTS = $(am_libtse3util_la_OBJECTS) +CONFIG_HEADER = ../../../config.h +CONFIG_CLEAN_FILES = +LTLIBRARIES = $(noinst_LTLIBRARIES) + -DEFS = @DEFS@ -DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir) +DEFS = @DEFS@ -I. -I$(srcdir) -I../../.. CPPFLAGS = @CPPFLAGS@ LDFLAGS = @LDFLAGS@ LIBS = @LIBS@ -depcomp = $(SHELL) $(top_srcdir)/depcomp -am__depfiles_maybe = depfiles -@AMDEP_TRUE@DEP_FILES = ./$(DEPDIR)/Demidify.Plo \ -@AMDEP_TRUE@ ./$(DEPDIR)/MidiScheduler.Plo \ -@AMDEP_TRUE@ ./$(DEPDIR)/MulDiv.Plo ./$(DEPDIR)/NoteNumber.Plo \ -@AMDEP_TRUE@ ./$(DEPDIR)/Phrase.Plo \ -@AMDEP_TRUE@ ./$(DEPDIR)/PowerQuantise.Plo ./$(DEPDIR)/Snap.Plo \ -@AMDEP_TRUE@ ./$(DEPDIR)/Song.Plo ./$(DEPDIR)/Track.Plo -CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ - $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -LTCXXCOMPILE = $(LIBTOOL) --mode=compile $(CXX) $(DEFS) \ - $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ - $(AM_CXXFLAGS) $(CXXFLAGS) -CXXLD = $(CXX) -CXXLINK = $(LIBTOOL) --mode=link $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) \ - $(AM_LDFLAGS) $(LDFLAGS) -o $@ +libtse3util_la_LDFLAGS = +libtse3util_la_LIBADD = +libtse3util_la_OBJECTS = Demidify.lo MidiScheduler.lo MulDiv.lo \ +NoteNumber.lo Phrase.lo PowerQuantise.lo Song.lo Snap.lo Track.lo CXXFLAGS = @CXXFLAGS@ -DIST_SOURCES = $(libtse3util_la_SOURCES) -HEADERS = $(tse3utilh_HEADERS) +CXXCOMPILE = $(CXX) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) +LTCXXCOMPILE = $(LIBTOOL) --mode=compile $(CXX) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) +CXXLD = $(CXX) +CXXLINK = $(LIBTOOL) --mode=link $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) $(LDFLAGS) -o $@ +HEADERS = $(tse3utilh_HEADERS) -DIST_COMMON = $(tse3utilh_HEADERS) Makefile.am Makefile.in -SOURCES = $(libtse3util_la_SOURCES) +DIST_COMMON = Makefile.am Makefile.in -all: all-am +DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) + +TAR = tar +GZIP_ENV = --best +DEP_FILES = .deps/Demidify.P .deps/MidiScheduler.P .deps/MulDiv.P \ +.deps/NoteNumber.P .deps/Phrase.P .deps/PowerQuantise.P .deps/Snap.P \ +.deps/Song.P .deps/Track.P +SOURCES = $(libtse3util_la_SOURCES) +OBJECTS = $(libtse3util_la_OBJECTS) + +all: all-redirect .SUFFIXES: -.SUFFIXES: .cpp .lo .o .obj -$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) - cd $(top_srcdir) && \ - $(AUTOMAKE) --gnu src/tse3/util/Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe) +.SUFFIXES: .S .c .cpp .lo .o .obj .s +$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) + cd $(top_srcdir) && $(AUTOMAKE) --gnu src/tse3/util/Makefile + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES) + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status + + +mostlyclean-noinstLTLIBRARIES: clean-noinstLTLIBRARIES: -test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES) - @list='$(noinst_LTLIBRARIES)'; for p in $$list; do \ - dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \ - test -z "$dir" && dir=.; \ - echo "rm -f \"$${dir}/so_locations\""; \ - rm -f "$${dir}/so_locations"; \ - done -libtse3util.la: $(libtse3util_la_OBJECTS) $(libtse3util_la_DEPENDENCIES) - $(CXXLINK) $(libtse3util_la_LDFLAGS) $(libtse3util_la_OBJECTS) $(libtse3util_la_LIBADD) $(LIBS) + +distclean-noinstLTLIBRARIES: + +maintainer-clean-noinstLTLIBRARIES: + +# FIXME: We should only use cygpath when building on Windows, +# and only if it is available. +.c.obj: + $(COMPILE) -c `cygpath -w $<` + +.s.o: + $(COMPILE) -c $< + +.S.o: + $(COMPILE) -c $< mostlyclean-compile: - -rm -f *.$(OBJEXT) core *.core + -rm -f *.o core *.core + -rm -f *.$(OBJEXT) + +clean-compile: distclean-compile: -rm -f *.tab.c -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/Demidify.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/MidiScheduler.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/MulDiv.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/NoteNumber.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/Phrase.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/PowerQuantise.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/Snap.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/Song.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/Track.Plo@am__quote@ - -distclean-depend: - -rm -rf ./$(DEPDIR) +maintainer-clean-compile: -.cpp.o: -@AMDEP_TRUE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@ -@AMDEP_TRUE@ $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - $(CXXCOMPILE) -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$< - -.cpp.obj: -@AMDEP_TRUE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@ -@AMDEP_TRUE@ $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - $(CXXCOMPILE) -c -o $@ `cygpath -w $<` +.s.lo: + $(LIBTOOL) --mode=compile $(COMPILE) -c $< -.cpp.lo: -@AMDEP_TRUE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ -@AMDEP_TRUE@ depfile='$(DEPDIR)/$*.Plo' tmpdepfile='$(DEPDIR)/$*.TPlo' @AMDEPBACKSLASH@ -@AMDEP_TRUE@ $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - $(LTCXXCOMPILE) -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$< -CXXDEPMODE = @CXXDEPMODE@ +.S.lo: + $(LIBTOOL) --mode=compile $(COMPILE) -c $< mostlyclean-libtool: -rm -f *.lo @@ -214,170 +197,211 @@ -rm -rf .libs _libs distclean-libtool: - -rm -f libtool -uninstall-info-am: -tse3utilhHEADERS_INSTALL = $(INSTALL_HEADER) + +maintainer-clean-libtool: + +libtse3util.la: $(libtse3util_la_OBJECTS) $(libtse3util_la_DEPENDENCIES) + $(CXXLINK) $(libtse3util_la_LDFLAGS) $(libtse3util_la_OBJECTS) $(libtse3util_la_LIBADD) $(LIBS) +.cpp.o: + $(CXXCOMPILE) -c $< +.cpp.obj: + $(CXXCOMPILE) -c `cygpath -w $<` +.cpp.lo: + $(LTCXXCOMPILE) -c $< + install-tse3utilhHEADERS: $(tse3utilh_HEADERS) @$(NORMAL_INSTALL) $(mkinstalldirs) $(DESTDIR)$(tse3utilhdir) @list='$(tse3utilh_HEADERS)'; for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - f="`echo $$p | sed -e 's|^.*/||'`"; \ - echo " $(tse3utilhHEADERS_INSTALL) $$d$$p $(DESTDIR)$(tse3utilhdir)/$$f"; \ - $(tse3utilhHEADERS_INSTALL) $$d$$p $(DESTDIR)$(tse3utilhdir)/$$f; \ + if test -f "$$p"; then d= ; else d="$(srcdir)/"; fi; \ + echo " $(INSTALL_DATA) $$d$$p $(DESTDIR)$(tse3utilhdir)/$$p"; \ + $(INSTALL_DATA) $$d$$p $(DESTDIR)$(tse3utilhdir)/$$p; \ done uninstall-tse3utilhHEADERS: @$(NORMAL_UNINSTALL) - @list='$(tse3utilh_HEADERS)'; for p in $$list; do \ - f="`echo $$p | sed -e 's|^.*/||'`"; \ - echo " rm -f $(DESTDIR)$(tse3utilhdir)/$$f"; \ - rm -f $(DESTDIR)$(tse3utilhdir)/$$f; \ + list='$(tse3utilh_HEADERS)'; for p in $$list; do \ + rm -f $(DESTDIR)$(tse3utilhdir)/$$p; \ done -ETAGS = etags -ETAGSFLAGS = - tags: TAGS -ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ +ID: $(HEADERS) $(SOURCES) $(LISP) + list='$(SOURCES) $(HEADERS)'; \ + unique=`for i in $$list; do echo $$i; done | \ + awk ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ - mkid -fID $$unique + here=`pwd` && cd $(srcdir) \ + && mkid -f$$here/ID $$unique $(LISP) -TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) +TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP) tags=; \ here=`pwd`; \ - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ + list='$(SOURCES) $(HEADERS)'; \ + unique=`for i in $$list; do echo $$i; done | \ + awk ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ - test -z "$(ETAGS_ARGS)$$tags$$unique" \ - || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$tags $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && cd $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) $$here + test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \ + || (cd $(srcdir) && etags -o $$here/TAGS $(ETAGS_ARGS) $$tags $$unique $(LISP)) + +mostlyclean-tags: + +clean-tags: distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) + -rm -f TAGS ID + +maintainer-clean-tags: -top_distdir = ../../.. -distdir = $(top_distdir)/$(PACKAGE)-$(VERSION) +distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir) + +subdir = src/tse3/util distdir: $(DISTFILES) - @list='$(DISTFILES)'; for file in $$list; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test "$$dir" != "$$file" && test "$$dir" != "."; then \ - dir="/$$dir"; \ - $(mkinstalldirs) "$(distdir)$$dir"; \ - else \ - dir=''; \ - fi; \ + here=`cd $(top_builddir) && pwd`; \ + top_distdir=`cd $(top_distdir) && pwd`; \ + distdir=`cd $(distdir) && pwd`; \ + cd $(top_srcdir) \ + && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu src/tse3/util/Makefile + @for file in $(DISTFILES); do \ + d=$(srcdir); \ if test -d $$d/$$file; then \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ - fi; \ - cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + cp -pr $$d/$$file $(distdir)/$$file; \ else \ test -f $(distdir)/$$file \ - || cp -p $$d/$$file $(distdir)/$$file \ - || exit 1; \ + || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ + || cp -p $$d/$$file $(distdir)/$$file || :; \ fi; \ done -check-am: all-am -check: check-am -all-am: Makefile $(LTLIBRARIES) $(HEADERS) -installdirs: - $(mkinstalldirs) $(DESTDIR)$(tse3utilhdir) +DEPS_MAGIC := $(shell mkdir .deps > /dev/null 2>&1 || :) -install: install-am +-include $(DEP_FILES) + +mostlyclean-depend: + +clean-depend: + +distclean-depend: + -rm -rf .deps + +maintainer-clean-depend: + +%.o: %.c + @echo '$(COMPILE) -c $<'; \ + $(COMPILE) -Wp,-MD,.deps/$(*F).pp -c $< + @-cp .deps/$(*F).pp .deps/$(*F).P; \ + tr ' ' '\012' < .deps/$(*F).pp \ + | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \ + >> .deps/$(*F).P; \ + rm .deps/$(*F).pp + +%.lo: %.c + @echo '$(LTCOMPILE) -c $<'; \ + $(LTCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $< + @-sed -e 's/^\([^:]*\)\.o[ ]*:/\1.lo \1.o :/' \ + < .deps/$(*F).pp > .deps/$(*F).P; \ + tr ' ' '\012' < .deps/$(*F).pp \ + | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \ + >> .deps/$(*F).P; \ + rm -f .deps/$(*F).pp + +%.o: %.cpp + @echo '$(CXXCOMPILE) -c $<'; \ + $(CXXCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $< + @-cp .deps/$(*F).pp .deps/$(*F).P; \ + tr ' ' '\012' < .deps/$(*F).pp \ + | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \ + >> .deps/$(*F).P; \ + rm .deps/$(*F).pp + +%.lo: %.cpp + @echo '$(LTCXXCOMPILE) -c $<'; \ + $(LTCXXCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $< + @-sed -e 's/^\([^:]*\)\.o[ ]*:/\1.lo \1.o :/' \ + < .deps/$(*F).pp > .deps/$(*F).P; \ + tr ' ' '\012' < .deps/$(*F).pp \ + | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \ + >> .deps/$(*F).P; \ + rm -f .deps/$(*F).pp +info-am: +info: info-am +dvi-am: +dvi: dvi-am +check-am: all-am +check: check-am +installcheck-am: +installcheck: installcheck-am +install-exec-am: install-exec: install-exec-am + +install-data-am: install-tse3utilhHEADERS install-data: install-data-am -uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am +install: install-am +uninstall-am: uninstall-tse3utilhHEADERS +uninstall: uninstall-am +all-am: Makefile $(LTLIBRARIES) $(HEADERS) +all-redirect: all-am install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install + $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install +installdirs: + $(mkinstalldirs) $(DESTDIR)$(tse3utilhdir) + + mostlyclean-generic: clean-generic: distclean-generic: -rm -f Makefile $(CONFIG_CLEAN_FILES) + -rm -f config.cache config.log stamp-h stamp-h[0-9]* -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES) maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-am - -clean-am: clean-generic clean-libtool clean-noinstLTLIBRARIES \ - mostlyclean-am - -distclean: distclean-am - -distclean-am: clean-am distclean-compile distclean-depend \ - distclean-generic distclean-libtool distclean-tags - -dvi: dvi-am - -dvi-am: - -info: info-am +mostlyclean-am: mostlyclean-noinstLTLIBRARIES mostlyclean-compile \ + mostlyclean-libtool mostlyclean-tags mostlyclean-depend \ + mostlyclean-generic -info-am: +mostlyclean: mostlyclean-am -install-data-am: install-tse3utilhHEADERS +clean-am: clean-noinstLTLIBRARIES clean-compile clean-libtool \ + clean-tags clean-depend clean-generic mostlyclean-am -install-exec-am: +clean: clean-am -install-info: install-info-am +distclean-am: distclean-noinstLTLIBRARIES distclean-compile \ + distclean-libtool distclean-tags distclean-depend \ + distclean-generic clean-am + -rm -f libtool -install-man: +distclean: distclean-am -installcheck-am: +maintainer-clean-am: maintainer-clean-noinstLTLIBRARIES \ + maintainer-clean-compile maintainer-clean-libtool \ + maintainer-clean-tags maintainer-clean-depend \ + maintainer-clean-generic distclean-am + @echo "This command is intended for maintainers to use;" + @echo "it deletes files that may require special tools to rebuild." maintainer-clean: maintainer-clean-am -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-compile mostlyclean-generic \ - mostlyclean-libtool - -uninstall-am: uninstall-info-am uninstall-tse3utilhHEADERS +.PHONY: mostlyclean-noinstLTLIBRARIES distclean-noinstLTLIBRARIES \ +clean-noinstLTLIBRARIES maintainer-clean-noinstLTLIBRARIES \ +mostlyclean-compile distclean-compile clean-compile \ +maintainer-clean-compile mostlyclean-libtool distclean-libtool \ +clean-libtool maintainer-clean-libtool uninstall-tse3utilhHEADERS \ +install-tse3utilhHEADERS tags mostlyclean-tags distclean-tags \ +clean-tags maintainer-clean-tags distdir mostlyclean-depend \ +distclean-depend clean-depend maintainer-clean-depend info-am info \ +dvi-am dvi check check-am installcheck-am installcheck install-exec-am \ +install-exec install-data-am install-data install-am install \ +uninstall-am uninstall all-redirect all-am all installdirs \ +mostlyclean-generic distclean-generic clean-generic \ +maintainer-clean-generic clean mostlyclean distclean maintainer-clean -.PHONY: GTAGS all all-am check check-am clean clean-generic \ - clean-libtool clean-noinstLTLIBRARIES distclean \ - distclean-compile distclean-depend distclean-generic \ - distclean-libtool distclean-tags distdir dvi dvi-am info \ - info-am install install-am install-data install-data-am \ - install-exec install-exec-am install-info install-info-am \ - install-man install-strip install-tse3utilhHEADERS installcheck \ - installcheck-am installdirs maintainer-clean \ - maintainer-clean-generic mostlyclean mostlyclean-compile \ - mostlyclean-generic mostlyclean-libtool tags uninstall \ - uninstall-am uninstall-info-am uninstall-tse3utilhHEADERS # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. --- tse3-0.2.7.orig/src/tse3/Makefile.am +++ tse3-0.2.7/src/tse3/Makefile.am @@ -9,7 +9,7 @@ EXTRA_DIST = tse3.3 #libtse3_la_CXXFLAGS = -#libtse3_la_LDFLAGS = --strip-unneeded +libtse3_la_LDFLAGS = -release $(VERSION) libtse3_la_LIBADD = \ ./app/libtse3app.la \ ./cmd/libtse3cmd.la \ --- tse3-0.2.7.orig/src/tse3play/Makefile.in +++ tse3-0.2.7/src/tse3play/Makefile.in @@ -1,8 +1,6 @@ -# Makefile.in generated by automake 1.6.3 from Makefile.am. -# @configure_input@ +# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am -# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 -# Free Software Foundation, Inc. +# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. @@ -12,7 +10,7 @@ # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. -@SET_MAKE@ + SHELL = @SHELL@ srcdir = @srcdir@ @@ -33,9 +31,13 @@ mandir = @mandir@ includedir = @includedir@ oldincludedir = /usr/include + +DESTDIR = + pkgdatadir = $(datadir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ + top_builddir = ../.. ACLOCAL = @ACLOCAL@ @@ -43,16 +45,12 @@ AUTOMAKE = @AUTOMAKE@ AUTOHEADER = @AUTOHEADER@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd INSTALL = @INSTALL@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS) INSTALL_DATA = @INSTALL_DATA@ -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_HEADER = $(INSTALL_DATA) transform = @program_transform_name@ + NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : @@ -61,29 +59,34 @@ POST_UNINSTALL = : host_alias = @host_alias@ host_triplet = @host@ - -EXEEXT = @EXEEXT@ -OBJEXT = @OBJEXT@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -AMTAR = @AMTAR@ +AR = @AR@ AS = @AS@ -AWK = @AWK@ CC = @CC@ CPP = @CPP@ CPP_MM = @CPP_MM@ CXX = @CXX@ -DEPDIR = @DEPDIR@ +CXXCPP = @CXXCPP@ DLLTOOL = @DLLTOOL@ ECHO = @ECHO@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +EGREP = @EGREP@ +EXEEXT = @EXEEXT@ +F77 = @F77@ +GCJ = @GCJ@ +GCJFLAGS = @GCJFLAGS@ +HAVE_LIB = @HAVE_LIB@ +LIB = @LIB@ LIBARTS = @LIBARTS@ LIBASOUND = @LIBASOUND@ LIBTOOL = @LIBTOOL@ LIBTOOL_DEPS = @LIBTOOL_DEPS@ LN_S = @LN_S@ +LTLIB = @LTLIB@ +MAKEINFO = @MAKEINFO@ OBJDUMP = @OBJDUMP@ +OBJEXT = @OBJEXT@ PACKAGE = @PACKAGE@ RANLIB = @RANLIB@ +RC = @RC@ STRIP = @STRIP@ TSE3_ALSA_PREFIX = @TSE3_ALSA_PREFIX@ TSE3_ALSA_VERSION = @TSE3_ALSA_VERSION@ @@ -95,9 +98,7 @@ TSE3_WITH_OSS = @TSE3_WITH_OSS@ TSE3_WITH_WIN32 = @TSE3_WITH_WIN32@ VERSION = @VERSION@ -am__include = @am__include@ -am__quote = @am__quote@ -install_sh = @install_sh@ + bin_PROGRAMS = tse3play tse3play_SOURCES = tse3play.h tse3play.cpp main.cpp @@ -109,122 +110,108 @@ EXTRA_DIST = tse3play.1 INCLUDES = -I$(top_srcdir)/src -subdir = src/tse3play mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = -bin_PROGRAMS = tse3play$(EXEEXT) -PROGRAMS = $(bin_PROGRAMS) - -am_tse3play_OBJECTS = tse3play.$(OBJEXT) main.$(OBJEXT) -tse3play_OBJECTS = $(am_tse3play_OBJECTS) -tse3play_DEPENDENCIES = $(top_builddir)/src/tse3/libtse3.la -tse3play_LDFLAGS = +CONFIG_HEADER = ../../config.h +CONFIG_CLEAN_FILES = +bin_PROGRAMS = tse3play$(EXEEXT) +PROGRAMS = $(bin_PROGRAMS) -DEFS = @DEFS@ -DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir) + +DEFS = @DEFS@ -I. -I$(srcdir) -I../.. CPPFLAGS = @CPPFLAGS@ LDFLAGS = @LDFLAGS@ LIBS = @LIBS@ -depcomp = $(SHELL) $(top_srcdir)/depcomp -am__depfiles_maybe = depfiles -@AMDEP_TRUE@DEP_FILES = ./$(DEPDIR)/main.Po ./$(DEPDIR)/tse3play.Po -CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ - $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -LTCXXCOMPILE = $(LIBTOOL) --mode=compile $(CXX) $(DEFS) \ - $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ - $(AM_CXXFLAGS) $(CXXFLAGS) -CXXLD = $(CXX) -CXXLINK = $(LIBTOOL) --mode=link $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) \ - $(AM_LDFLAGS) $(LDFLAGS) -o $@ +tse3play_OBJECTS = tse3play.$(OBJEXT) main.$(OBJEXT) +tse3play_DEPENDENCIES = $(top_builddir)/src/tse3/libtse3.la +tse3play_LDFLAGS = CXXFLAGS = @CXXFLAGS@ +CXXCOMPILE = $(CXX) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) +LTCXXCOMPILE = $(LIBTOOL) --mode=compile $(CXX) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) +CXXLD = $(CXX) +CXXLINK = $(LIBTOOL) --mode=link $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) $(LDFLAGS) -o $@ CFLAGS = @CFLAGS@ -COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ - $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) \ - $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) +COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) +LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) CCLD = $(CC) -LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ - $(AM_LDFLAGS) $(LDFLAGS) -o $@ -DIST_SOURCES = $(tse3play_SOURCES) +LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@ +man1dir = $(mandir)/man1 +MANS = $(man_MANS) NROFF = nroff -MANS = $(man_MANS) -DIST_COMMON = Makefile.am Makefile.in -SOURCES = $(tse3play_SOURCES) +DIST_COMMON = Makefile.am Makefile.in + -all: all-am +DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) +TAR = tar +GZIP_ENV = --best +DEP_FILES = .deps/main.P .deps/tse3play.P +SOURCES = $(tse3play_SOURCES) +OBJECTS = $(tse3play_OBJECTS) + +all: all-redirect .SUFFIXES: -.SUFFIXES: .cpp .lo .o .obj -$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) - cd $(top_srcdir) && \ - $(AUTOMAKE) --gnu src/tse3play/Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe) -binPROGRAMS_INSTALL = $(INSTALL_PROGRAM) +.SUFFIXES: .S .c .cpp .lo .o .obj .s +$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) + cd $(top_srcdir) && $(AUTOMAKE) --gnu src/tse3play/Makefile + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES) + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status + + +mostlyclean-binPROGRAMS: + +clean-binPROGRAMS: + -test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS) + +distclean-binPROGRAMS: + +maintainer-clean-binPROGRAMS: + install-binPROGRAMS: $(bin_PROGRAMS) @$(NORMAL_INSTALL) $(mkinstalldirs) $(DESTDIR)$(bindir) @list='$(bin_PROGRAMS)'; for p in $$list; do \ - p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ - if test -f $$p \ - || test -f $$p1 \ - ; then \ - f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \ - echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(binPROGRAMS_INSTALL) $$p $(DESTDIR)$(bindir)/$$f"; \ - $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(binPROGRAMS_INSTALL) $$p $(DESTDIR)$(bindir)/$$f; \ + if test -f $$p; then \ + echo " $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`"; \ + $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \ else :; fi; \ done uninstall-binPROGRAMS: @$(NORMAL_UNINSTALL) - @list='$(bin_PROGRAMS)'; for p in $$list; do \ - f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \ - echo " rm -f $(DESTDIR)$(bindir)/$$f"; \ - rm -f $(DESTDIR)$(bindir)/$$f; \ + list='$(bin_PROGRAMS)'; for p in $$list; do \ + rm -f $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \ done -clean-binPROGRAMS: - @list='$(bin_PROGRAMS)'; for p in $$list; do \ - f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ - echo " rm -f $$p $$f"; \ - rm -f $$p $$f ; \ - done -tse3play$(EXEEXT): $(tse3play_OBJECTS) $(tse3play_DEPENDENCIES) - @rm -f tse3play$(EXEEXT) - $(CXXLINK) $(tse3play_LDFLAGS) $(tse3play_OBJECTS) $(tse3play_LDADD) $(LIBS) +# FIXME: We should only use cygpath when building on Windows, +# and only if it is available. +.c.obj: + $(COMPILE) -c `cygpath -w $<` + +.s.o: + $(COMPILE) -c $< + +.S.o: + $(COMPILE) -c $< mostlyclean-compile: - -rm -f *.$(OBJEXT) core *.core + -rm -f *.o core *.core + -rm -f *.$(OBJEXT) + +clean-compile: distclean-compile: -rm -f *.tab.c -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/main.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tse3play.Po@am__quote@ - -distclean-depend: - -rm -rf ./$(DEPDIR) - -.cpp.o: -@AMDEP_TRUE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@ -@AMDEP_TRUE@ $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - $(CXXCOMPILE) -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$< +maintainer-clean-compile: -.cpp.obj: -@AMDEP_TRUE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@ -@AMDEP_TRUE@ $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - $(CXXCOMPILE) -c -o $@ `cygpath -w $<` +.s.lo: + $(LIBTOOL) --mode=compile $(COMPILE) -c $< -.cpp.lo: -@AMDEP_TRUE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ -@AMDEP_TRUE@ depfile='$(DEPDIR)/$*.Plo' tmpdepfile='$(DEPDIR)/$*.TPlo' @AMDEPBACKSLASH@ -@AMDEP_TRUE@ $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - $(LTCXXCOMPILE) -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$< -CXXDEPMODE = @CXXDEPMODE@ +.S.lo: + $(LIBTOOL) --mode=compile $(COMPILE) -c $< mostlyclean-libtool: -rm -f *.lo @@ -233,16 +220,23 @@ -rm -rf .libs _libs distclean-libtool: - -rm -f libtool -uninstall-info-am: -man1dir = $(mandir)/man1 -install-man1: $(man1_MANS) $(man_MANS) - @$(NORMAL_INSTALL) +maintainer-clean-libtool: + +tse3play$(EXEEXT): $(tse3play_OBJECTS) $(tse3play_DEPENDENCIES) + @rm -f tse3play$(EXEEXT) + $(CXXLINK) $(tse3play_LDFLAGS) $(tse3play_OBJECTS) $(tse3play_LDADD) $(LIBS) +.cpp.o: + $(CXXCOMPILE) -c $< +.cpp.obj: + $(CXXCOMPILE) -c `cygpath -w $<` +.cpp.lo: + $(LTCXXCOMPILE) -c $< + +install-man1: $(mkinstalldirs) $(DESTDIR)$(man1dir) - @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \ - l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ - for i in $$l2; do \ + @list='$(man1_MANS)'; \ + l2='$(man_MANS)'; for i in $$l2; do \ case "$$i" in \ *.1*) list="$$list $$i" ;; \ esac; \ @@ -251,21 +245,15 @@ if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \ else file=$$i; fi; \ ext=`echo $$i | sed -e 's/^.*\\.//'`; \ - case "$$ext" in \ - 1*) ;; \ - *) ext='1' ;; \ - esac; \ inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ - inst=`echo $$inst | sed -e 's/^.*\///'`; \ inst=`echo $$inst | sed '$(transform)'`.$$ext; \ echo " $(INSTALL_DATA) $$file $(DESTDIR)$(man1dir)/$$inst"; \ $(INSTALL_DATA) $$file $(DESTDIR)$(man1dir)/$$inst; \ done + uninstall-man1: - @$(NORMAL_UNINSTALL) - @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \ - l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ - for i in $$l2; do \ + @list='$(man1_MANS)'; \ + l2='$(man_MANS)'; for i in $$l2; do \ case "$$i" in \ *.1*) list="$$list $$i" ;; \ esac; \ @@ -273,157 +261,195 @@ for i in $$list; do \ ext=`echo $$i | sed -e 's/^.*\\.//'`; \ inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ - inst=`echo $$inst | sed -e 's/^.*\///'`; \ inst=`echo $$inst | sed '$(transform)'`.$$ext; \ echo " rm -f $(DESTDIR)$(man1dir)/$$inst"; \ rm -f $(DESTDIR)$(man1dir)/$$inst; \ done - -ETAGS = etags -ETAGSFLAGS = +install-man: $(MANS) + @$(NORMAL_INSTALL) + $(MAKE) $(AM_MAKEFLAGS) install-man1 +uninstall-man: + @$(NORMAL_UNINSTALL) + $(MAKE) $(AM_MAKEFLAGS) uninstall-man1 tags: TAGS -ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ +ID: $(HEADERS) $(SOURCES) $(LISP) + list='$(SOURCES) $(HEADERS)'; \ + unique=`for i in $$list; do echo $$i; done | \ + awk ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ - mkid -fID $$unique + here=`pwd` && cd $(srcdir) \ + && mkid -f$$here/ID $$unique $(LISP) -TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) +TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP) tags=; \ here=`pwd`; \ - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ + list='$(SOURCES) $(HEADERS)'; \ + unique=`for i in $$list; do echo $$i; done | \ + awk ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ - test -z "$(ETAGS_ARGS)$$tags$$unique" \ - || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$tags $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && cd $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) $$here + test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \ + || (cd $(srcdir) && etags -o $$here/TAGS $(ETAGS_ARGS) $$tags $$unique $(LISP)) + +mostlyclean-tags: + +clean-tags: distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) + -rm -f TAGS ID -top_distdir = ../.. -distdir = $(top_distdir)/$(PACKAGE)-$(VERSION) +maintainer-clean-tags: + +distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir) + +subdir = src/tse3play distdir: $(DISTFILES) - @list='$(DISTFILES)'; for file in $$list; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test "$$dir" != "$$file" && test "$$dir" != "."; then \ - dir="/$$dir"; \ - $(mkinstalldirs) "$(distdir)$$dir"; \ - else \ - dir=''; \ - fi; \ + here=`cd $(top_builddir) && pwd`; \ + top_distdir=`cd $(top_distdir) && pwd`; \ + distdir=`cd $(distdir) && pwd`; \ + cd $(top_srcdir) \ + && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu src/tse3play/Makefile + @for file in $(DISTFILES); do \ + d=$(srcdir); \ if test -d $$d/$$file; then \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ - fi; \ - cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + cp -pr $$d/$$file $(distdir)/$$file; \ else \ test -f $(distdir)/$$file \ - || cp -p $$d/$$file $(distdir)/$$file \ - || exit 1; \ + || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ + || cp -p $$d/$$file $(distdir)/$$file || :; \ fi; \ done -check-am: all-am -check: check-am -all-am: Makefile $(PROGRAMS) $(MANS) -installdirs: - $(mkinstalldirs) $(DESTDIR)$(bindir) $(DESTDIR)$(man1dir) +DEPS_MAGIC := $(shell mkdir .deps > /dev/null 2>&1 || :) -install: install-am +-include $(DEP_FILES) + +mostlyclean-depend: + +clean-depend: + +distclean-depend: + -rm -rf .deps + +maintainer-clean-depend: + +%.o: %.c + @echo '$(COMPILE) -c $<'; \ + $(COMPILE) -Wp,-MD,.deps/$(*F).pp -c $< + @-cp .deps/$(*F).pp .deps/$(*F).P; \ + tr ' ' '\012' < .deps/$(*F).pp \ + | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \ + >> .deps/$(*F).P; \ + rm .deps/$(*F).pp + +%.lo: %.c + @echo '$(LTCOMPILE) -c $<'; \ + $(LTCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $< + @-sed -e 's/^\([^:]*\)\.o[ ]*:/\1.lo \1.o :/' \ + < .deps/$(*F).pp > .deps/$(*F).P; \ + tr ' ' '\012' < .deps/$(*F).pp \ + | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \ + >> .deps/$(*F).P; \ + rm -f .deps/$(*F).pp + +%.o: %.cpp + @echo '$(CXXCOMPILE) -c $<'; \ + $(CXXCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $< + @-cp .deps/$(*F).pp .deps/$(*F).P; \ + tr ' ' '\012' < .deps/$(*F).pp \ + | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \ + >> .deps/$(*F).P; \ + rm .deps/$(*F).pp + +%.lo: %.cpp + @echo '$(LTCXXCOMPILE) -c $<'; \ + $(LTCXXCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $< + @-sed -e 's/^\([^:]*\)\.o[ ]*:/\1.lo \1.o :/' \ + < .deps/$(*F).pp > .deps/$(*F).P; \ + tr ' ' '\012' < .deps/$(*F).pp \ + | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \ + >> .deps/$(*F).P; \ + rm -f .deps/$(*F).pp +info-am: +info: info-am +dvi-am: +dvi: dvi-am +check-am: all-am +check: check-am +installcheck-am: +installcheck: installcheck-am +install-exec-am: install-binPROGRAMS install-exec: install-exec-am + +install-data-am: install-man install-data: install-data-am -uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am +install: install-am +uninstall-am: uninstall-binPROGRAMS uninstall-man +uninstall: uninstall-am +all-am: Makefile $(PROGRAMS) $(MANS) +all-redirect: all-am install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install + $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install +installdirs: + $(mkinstalldirs) $(DESTDIR)$(bindir) $(DESTDIR)$(mandir)/man1 + + mostlyclean-generic: clean-generic: distclean-generic: -rm -f Makefile $(CONFIG_CLEAN_FILES) + -rm -f config.cache config.log stamp-h stamp-h[0-9]* -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES) maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-am - -clean-am: clean-binPROGRAMS clean-generic clean-libtool mostlyclean-am +mostlyclean-am: mostlyclean-binPROGRAMS mostlyclean-compile \ + mostlyclean-libtool mostlyclean-tags mostlyclean-depend \ + mostlyclean-generic -distclean: distclean-am - -distclean-am: clean-am distclean-compile distclean-depend \ - distclean-generic distclean-libtool distclean-tags - -dvi: dvi-am - -dvi-am: - -info: info-am - -info-am: +mostlyclean: mostlyclean-am -install-data-am: install-man +clean-am: clean-binPROGRAMS clean-compile clean-libtool clean-tags \ + clean-depend clean-generic mostlyclean-am -install-exec-am: install-binPROGRAMS +clean: clean-am -install-info: install-info-am +distclean-am: distclean-binPROGRAMS distclean-compile distclean-libtool \ + distclean-tags distclean-depend distclean-generic \ + clean-am + -rm -f libtool -install-man: install-man1 +distclean: distclean-am -installcheck-am: +maintainer-clean-am: maintainer-clean-binPROGRAMS \ + maintainer-clean-compile maintainer-clean-libtool \ + maintainer-clean-tags maintainer-clean-depend \ + maintainer-clean-generic distclean-am + @echo "This command is intended for maintainers to use;" + @echo "it deletes files that may require special tools to rebuild." maintainer-clean: maintainer-clean-am -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-compile mostlyclean-generic \ - mostlyclean-libtool - -uninstall-am: uninstall-binPROGRAMS uninstall-info-am uninstall-man - -uninstall-man: uninstall-man1 +.PHONY: mostlyclean-binPROGRAMS distclean-binPROGRAMS clean-binPROGRAMS \ +maintainer-clean-binPROGRAMS uninstall-binPROGRAMS install-binPROGRAMS \ +mostlyclean-compile distclean-compile clean-compile \ +maintainer-clean-compile mostlyclean-libtool distclean-libtool \ +clean-libtool maintainer-clean-libtool install-man1 uninstall-man1 \ +install-man uninstall-man tags mostlyclean-tags distclean-tags \ +clean-tags maintainer-clean-tags distdir mostlyclean-depend \ +distclean-depend clean-depend maintainer-clean-depend info-am info \ +dvi-am dvi check check-am installcheck-am installcheck install-exec-am \ +install-exec install-data-am install-data install-am install \ +uninstall-am uninstall all-redirect all-am all installdirs \ +mostlyclean-generic distclean-generic clean-generic \ +maintainer-clean-generic clean mostlyclean distclean maintainer-clean -.PHONY: GTAGS all all-am check check-am clean clean-binPROGRAMS \ - clean-generic clean-libtool distclean distclean-compile \ - distclean-depend distclean-generic distclean-libtool \ - distclean-tags distdir dvi dvi-am info info-am install \ - install-am install-binPROGRAMS install-data install-data-am \ - install-exec install-exec-am install-info install-info-am \ - install-man install-man1 install-strip installcheck \ - installcheck-am installdirs maintainer-clean \ - maintainer-clean-generic mostlyclean mostlyclean-compile \ - mostlyclean-generic mostlyclean-libtool tags uninstall \ - uninstall-am uninstall-binPROGRAMS uninstall-info-am \ - uninstall-man uninstall-man1 # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. --- tse3-0.2.7.orig/src/Makefile.in +++ tse3-0.2.7/src/Makefile.in @@ -1,8 +1,6 @@ -# Makefile.in generated by automake 1.6.3 from Makefile.am. -# @configure_input@ +# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am -# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 -# Free Software Foundation, Inc. +# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. @@ -12,7 +10,7 @@ # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. -@SET_MAKE@ + SHELL = @SHELL@ srcdir = @srcdir@ @@ -33,9 +31,13 @@ mandir = @mandir@ includedir = @includedir@ oldincludedir = /usr/include + +DESTDIR = + pkgdatadir = $(datadir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ + top_builddir = .. ACLOCAL = @ACLOCAL@ @@ -43,16 +45,12 @@ AUTOMAKE = @AUTOMAKE@ AUTOHEADER = @AUTOHEADER@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd INSTALL = @INSTALL@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS) INSTALL_DATA = @INSTALL_DATA@ -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_HEADER = $(INSTALL_DATA) transform = @program_transform_name@ + NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : @@ -61,29 +59,34 @@ POST_UNINSTALL = : host_alias = @host_alias@ host_triplet = @host@ - -EXEEXT = @EXEEXT@ -OBJEXT = @OBJEXT@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -AMTAR = @AMTAR@ +AR = @AR@ AS = @AS@ -AWK = @AWK@ CC = @CC@ CPP = @CPP@ CPP_MM = @CPP_MM@ CXX = @CXX@ -DEPDIR = @DEPDIR@ +CXXCPP = @CXXCPP@ DLLTOOL = @DLLTOOL@ ECHO = @ECHO@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +EGREP = @EGREP@ +EXEEXT = @EXEEXT@ +F77 = @F77@ +GCJ = @GCJ@ +GCJFLAGS = @GCJFLAGS@ +HAVE_LIB = @HAVE_LIB@ +LIB = @LIB@ LIBARTS = @LIBARTS@ LIBASOUND = @LIBASOUND@ LIBTOOL = @LIBTOOL@ LIBTOOL_DEPS = @LIBTOOL_DEPS@ LN_S = @LN_S@ +LTLIB = @LTLIB@ +MAKEINFO = @MAKEINFO@ OBJDUMP = @OBJDUMP@ +OBJEXT = @OBJEXT@ PACKAGE = @PACKAGE@ RANLIB = @RANLIB@ +RC = @RC@ STRIP = @STRIP@ TSE3_ALSA_PREFIX = @TSE3_ALSA_PREFIX@ TSE3_ALSA_VERSION = @TSE3_ALSA_VERSION@ @@ -95,41 +98,28 @@ TSE3_WITH_OSS = @TSE3_WITH_OSS@ TSE3_WITH_WIN32 = @TSE3_WITH_WIN32@ VERSION = @VERSION@ -am__include = @am__include@ -am__quote = @am__quote@ -install_sh = @install_sh@ + SUBDIRS = tse3 examples tse3play EXTRA_DIST = Doxyfile -subdir = src mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = -DIST_SOURCES = - -RECURSIVE_TARGETS = info-recursive dvi-recursive install-info-recursive \ - uninstall-info-recursive all-recursive install-data-recursive \ - install-exec-recursive installdirs-recursive install-recursive \ - uninstall-recursive check-recursive installcheck-recursive -DIST_COMMON = Makefile.am Makefile.in -DIST_SUBDIRS = $(SUBDIRS) -all: all-recursive +CONFIG_HEADER = ../config.h +CONFIG_CLEAN_FILES = +DIST_COMMON = Makefile.am Makefile.in -.SUFFIXES: -$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) - cd $(top_srcdir) && \ - $(AUTOMAKE) --gnu src/Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe) -mostlyclean-libtool: - -rm -f *.lo +DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) -clean-libtool: - -rm -rf .libs _libs +TAR = tar +GZIP_ENV = --best +all: all-redirect +.SUFFIXES: +$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) + cd $(top_srcdir) && $(AUTOMAKE) --gnu src/Makefile + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES) + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status -distclean-libtool: - -rm -f libtool -uninstall-info-am: # This directory's subdirectories are mostly independent; you can cd # into them and run `make' without going through this Makefile. @@ -137,8 +127,13 @@ # (1) if the variable is set in `config.status', edit `config.status' # (which will cause the Makefiles to be regenerated when you run `make'); # (2) otherwise, pass the desired values on the `make' command line. -$(RECURSIVE_TARGETS): - @set fnord $$MAKEFLAGS; amf=$$2; \ + +@SET_MAKE@ + +all-recursive install-data-recursive install-exec-recursive \ +installdirs-recursive install-recursive uninstall-recursive \ +check-recursive installcheck-recursive info-recursive dvi-recursive: + @set fnord $(MAKEFLAGS); amf=$$2; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ @@ -158,18 +153,13 @@ mostlyclean-recursive clean-recursive distclean-recursive \ maintainer-clean-recursive: - @set fnord $$MAKEFLAGS; amf=$$2; \ + @set fnord $(MAKEFLAGS); amf=$$2; \ dot_seen=no; \ - case "$@" in \ - distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ - *) list='$(SUBDIRS)' ;; \ - esac; \ - rev=''; for subdir in $$list; do \ - if test "$$subdir" = "."; then :; else \ - rev="$$subdir $$rev"; \ - fi; \ + rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \ + rev="$$subdir $$rev"; \ + test "$$subdir" != "." || dot_seen=yes; \ done; \ - rev="$$rev ."; \ + test "$$dot_seen" = "no" && rev=". $$rev"; \ target=`echo $@ | sed s/-recursive//`; \ for subdir in $$rev; do \ echo "Making $$target in $$subdir"; \ @@ -186,168 +176,139 @@ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ done -ETAGS = etags -ETAGSFLAGS = - tags: TAGS -ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ +ID: $(HEADERS) $(SOURCES) $(LISP) + list='$(SOURCES) $(HEADERS)'; \ + unique=`for i in $$list; do echo $$i; done | \ + awk ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ - mkid -fID $$unique + here=`pwd` && cd $(srcdir) \ + && mkid -f$$here/ID $$unique $(LISP) -TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) +TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP) tags=; \ here=`pwd`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ - if test "$$subdir" = .; then :; else \ + if test "$$subdir" = .; then :; else \ test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \ - fi; \ + fi; \ done; \ - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ + list='$(SOURCES) $(HEADERS)'; \ + unique=`for i in $$list; do echo $$i; done | \ + awk ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ - test -z "$(ETAGS_ARGS)$$tags$$unique" \ - || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$tags $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && cd $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) $$here + test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \ + || (cd $(srcdir) && etags -o $$here/TAGS $(ETAGS_ARGS) $$tags $$unique $(LISP)) + +mostlyclean-tags: + +clean-tags: distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) + -rm -f TAGS ID + +maintainer-clean-tags: -top_distdir = .. -distdir = $(top_distdir)/$(PACKAGE)-$(VERSION) +distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir) + +subdir = src distdir: $(DISTFILES) - @list='$(DISTFILES)'; for file in $$list; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test "$$dir" != "$$file" && test "$$dir" != "."; then \ - dir="/$$dir"; \ - $(mkinstalldirs) "$(distdir)$$dir"; \ - else \ - dir=''; \ - fi; \ + here=`cd $(top_builddir) && pwd`; \ + top_distdir=`cd $(top_distdir) && pwd`; \ + distdir=`cd $(distdir) && pwd`; \ + cd $(top_srcdir) \ + && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu src/Makefile + @for file in $(DISTFILES); do \ + d=$(srcdir); \ if test -d $$d/$$file; then \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ - fi; \ - cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + cp -pr $$d/$$file $(distdir)/$$file; \ else \ test -f $(distdir)/$$file \ - || cp -p $$d/$$file $(distdir)/$$file \ - || exit 1; \ + || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ + || cp -p $$d/$$file $(distdir)/$$file || :; \ fi; \ done - list='$(SUBDIRS)'; for subdir in $$list; do \ + for subdir in $(SUBDIRS); do \ if test "$$subdir" = .; then :; else \ test -d $(distdir)/$$subdir \ || mkdir $(distdir)/$$subdir \ || exit 1; \ - (cd $$subdir && \ - $(MAKE) $(AM_MAKEFLAGS) \ - top_distdir="$(top_distdir)" \ - distdir=../$(distdir)/$$subdir \ - distdir) \ + chmod 777 $(distdir)/$$subdir; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(top_distdir) distdir=../$(distdir)/$$subdir distdir) \ || exit 1; \ fi; \ done +info-am: +info: info-recursive +dvi-am: +dvi: dvi-recursive check-am: all-am check: check-recursive -all-am: Makefile -installdirs: installdirs-recursive -installdirs-am: - -install: install-recursive +installcheck-am: +installcheck: installcheck-recursive +install-exec-am: install-exec: install-exec-recursive + +install-data-am: install-data: install-data-recursive -uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-recursive +install: install-recursive +uninstall-am: +uninstall: uninstall-recursive +all-am: Makefile +all-redirect: all-recursive install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install + $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install +installdirs: installdirs-recursive +installdirs-am: + + mostlyclean-generic: clean-generic: distclean-generic: -rm -f Makefile $(CONFIG_CLEAN_FILES) + -rm -f config.cache config.log stamp-h stamp-h[0-9]* maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-recursive - -clean-am: clean-generic clean-libtool mostlyclean-am - -distclean: distclean-recursive - -distclean-am: clean-am distclean-generic distclean-libtool \ - distclean-tags +mostlyclean-am: mostlyclean-tags mostlyclean-generic -dvi: dvi-recursive - -dvi-am: - -info: info-recursive +mostlyclean: mostlyclean-recursive -info-am: +clean-am: clean-tags clean-generic mostlyclean-am -install-data-am: - -install-exec-am: +clean: clean-recursive -install-info: install-info-recursive +distclean-am: distclean-tags distclean-generic clean-am + -rm -f libtool -install-man: +distclean: distclean-recursive -installcheck-am: +maintainer-clean-am: maintainer-clean-tags maintainer-clean-generic \ + distclean-am + @echo "This command is intended for maintainers to use;" + @echo "it deletes files that may require special tools to rebuild." maintainer-clean: maintainer-clean-recursive -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-recursive - -mostlyclean-am: mostlyclean-generic mostlyclean-libtool - -uninstall-am: uninstall-info-am - -uninstall-info: uninstall-info-recursive +.PHONY: install-data-recursive uninstall-data-recursive \ +install-exec-recursive uninstall-exec-recursive installdirs-recursive \ +uninstalldirs-recursive all-recursive check-recursive \ +installcheck-recursive info-recursive dvi-recursive \ +mostlyclean-recursive distclean-recursive clean-recursive \ +maintainer-clean-recursive tags tags-recursive mostlyclean-tags \ +distclean-tags clean-tags maintainer-clean-tags distdir info-am info \ +dvi-am dvi check check-am installcheck-am installcheck install-exec-am \ +install-exec install-data-am install-data install-am install \ +uninstall-am uninstall all-redirect all-am all installdirs-am \ +installdirs mostlyclean-generic distclean-generic clean-generic \ +maintainer-clean-generic clean mostlyclean distclean maintainer-clean -.PHONY: $(RECURSIVE_TARGETS) GTAGS all all-am check check-am clean \ - clean-generic clean-libtool clean-recursive distclean \ - distclean-generic distclean-libtool distclean-recursive \ - distclean-tags distdir dvi dvi-am dvi-recursive info info-am \ - info-recursive install install-am install-data install-data-am \ - install-data-recursive install-exec install-exec-am \ - install-exec-recursive install-info install-info-am \ - install-info-recursive install-man install-recursive \ - install-strip installcheck installcheck-am installdirs \ - installdirs-am installdirs-recursive maintainer-clean \ - maintainer-clean-generic maintainer-clean-recursive mostlyclean \ - mostlyclean-generic mostlyclean-libtool mostlyclean-recursive \ - tags tags-recursive uninstall uninstall-am uninstall-info-am \ - uninstall-info-recursive uninstall-recursive # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. --- tse3-0.2.7.orig/Makefile.in +++ tse3-0.2.7/Makefile.in @@ -1,8 +1,6 @@ -# Makefile.in generated by automake 1.6.3 from Makefile.am. -# @configure_input@ +# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am -# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 -# Free Software Foundation, Inc. +# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. @@ -12,7 +10,7 @@ # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. -@SET_MAKE@ + SHELL = @SHELL@ srcdir = @srcdir@ @@ -33,9 +31,13 @@ mandir = @mandir@ includedir = @includedir@ oldincludedir = /usr/include + +DESTDIR = + pkgdatadir = $(datadir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ + top_builddir = . ACLOCAL = @ACLOCAL@ @@ -43,16 +45,12 @@ AUTOMAKE = @AUTOMAKE@ AUTOHEADER = @AUTOHEADER@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd INSTALL = @INSTALL@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS) INSTALL_DATA = @INSTALL_DATA@ -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_HEADER = $(INSTALL_DATA) transform = @program_transform_name@ + NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : @@ -61,29 +59,34 @@ POST_UNINSTALL = : host_alias = @host_alias@ host_triplet = @host@ - -EXEEXT = @EXEEXT@ -OBJEXT = @OBJEXT@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -AMTAR = @AMTAR@ +AR = @AR@ AS = @AS@ -AWK = @AWK@ CC = @CC@ CPP = @CPP@ CPP_MM = @CPP_MM@ CXX = @CXX@ -DEPDIR = @DEPDIR@ +CXXCPP = @CXXCPP@ DLLTOOL = @DLLTOOL@ ECHO = @ECHO@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +EGREP = @EGREP@ +EXEEXT = @EXEEXT@ +F77 = @F77@ +GCJ = @GCJ@ +GCJFLAGS = @GCJFLAGS@ +HAVE_LIB = @HAVE_LIB@ +LIB = @LIB@ LIBARTS = @LIBARTS@ LIBASOUND = @LIBASOUND@ LIBTOOL = @LIBTOOL@ LIBTOOL_DEPS = @LIBTOOL_DEPS@ LN_S = @LN_S@ +LTLIB = @LTLIB@ +MAKEINFO = @MAKEINFO@ OBJDUMP = @OBJDUMP@ +OBJEXT = @OBJEXT@ PACKAGE = @PACKAGE@ RANLIB = @RANLIB@ +RC = @RC@ STRIP = @STRIP@ TSE3_ALSA_PREFIX = @TSE3_ALSA_PREFIX@ TSE3_ALSA_VERSION = @TSE3_ALSA_VERSION@ @@ -95,106 +98,100 @@ TSE3_WITH_OSS = @TSE3_WITH_OSS@ TSE3_WITH_WIN32 = @TSE3_WITH_WIN32@ VERSION = @VERSION@ -am__include = @am__include@ -am__quote = @am__quote@ -install_sh = @install_sh@ + SUBDIRS = doc demos src EXTRA_DIST = Version tse3.spec - ############################################################################### # register rule + AUTHOR_EMAIL = pete@cthree.org REG_TMP_FILE = /tmp/tse3-reg.txt - ############################################################################### # Documentation + @INSTALL_TSE3_DOC_TRUE@docs_DATA = AUTHORS COPYING @INSTALL_TSE3_DOC_TRUE@docsdir = ${prefix}/doc/${PACKAGE}-${VERSION} -subdir = . ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs CONFIG_HEADER = config.h -CONFIG_CLEAN_FILES = -DIST_SOURCES = -DATA = $(docs_DATA) +CONFIG_CLEAN_FILES = +DATA = $(docs_DATA) +DIST_COMMON = README ./stamp-h.in AUTHORS COPYING ChangeLog INSTALL \ +Makefile.am Makefile.in NEWS THANKS TODO aclocal.m4 config.guess \ +config.h.in config.sub configure configure.in install-sh ltmain.sh \ +missing mkinstalldirs -RECURSIVE_TARGETS = info-recursive dvi-recursive install-info-recursive \ - uninstall-info-recursive all-recursive install-data-recursive \ - install-exec-recursive installdirs-recursive install-recursive \ - uninstall-recursive check-recursive installcheck-recursive -DIST_COMMON = README AUTHORS COPYING ChangeLog INSTALL Makefile.am \ - Makefile.in NEWS THANKS TODO aclocal.m4 config.guess \ - config.h.in config.sub configure configure.in depcomp \ - install-sh ltmain.sh missing mkinstalldirs -DIST_SUBDIRS = $(SUBDIRS) -all: config.h - $(MAKE) $(AM_MAKEFLAGS) all-recursive +DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) + +TAR = tar +GZIP_ENV = --best +all: all-redirect .SUFFIXES: +$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) + cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES) + cd $(top_builddir) \ + && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status -am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ - configure.lineno -$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) - cd $(top_srcdir) && \ - $(AUTOMAKE) --gnu Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe) +$(ACLOCAL_M4): configure.in + cd $(srcdir) && $(ACLOCAL) -$(top_builddir)/config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) +config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) $(SHELL) ./config.status --recheck -$(srcdir)/configure: $(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES) +$(srcdir)/configure: $(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES) cd $(srcdir) && $(AUTOCONF) -$(ACLOCAL_M4): configure.in - cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) - -config.h: stamp-h1 +config.h: stamp-h @if test ! -f $@; then \ - rm -f stamp-h1; \ - $(MAKE) stamp-h1; \ + rm -f stamp-h; \ + $(MAKE) stamp-h; \ else :; fi +stamp-h: $(srcdir)/config.h.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES= CONFIG_HEADERS=config.h \ + $(SHELL) ./config.status + @echo timestamp > stamp-h 2> /dev/null +$(srcdir)/config.h.in: $(srcdir)/stamp-h.in + @if test ! -f $@; then \ + rm -f $(srcdir)/stamp-h.in; \ + $(MAKE) $(srcdir)/stamp-h.in; \ + else :; fi +$(srcdir)/stamp-h.in: $(top_srcdir)/configure.in $(ACLOCAL_M4) + cd $(top_srcdir) && $(AUTOHEADER) + @echo timestamp > $(srcdir)/stamp-h.in 2> /dev/null -stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status - @rm -f stamp-h1 - cd $(top_builddir) && $(SHELL) ./config.status config.h +mostlyclean-hdr: -$(srcdir)/config.h.in: $(top_srcdir)/configure.in $(ACLOCAL_M4) - cd $(top_srcdir) && $(AUTOHEADER) - touch $(srcdir)/config.h.in +clean-hdr: distclean-hdr: - -rm -f config.h stamp-h1 - -mostlyclean-libtool: - -rm -f *.lo + -rm -f config.h -clean-libtool: - -rm -rf .libs _libs +maintainer-clean-hdr: -distclean-libtool: - -rm -f libtool -uninstall-info-am: -docsDATA_INSTALL = $(INSTALL_DATA) install-docsDATA: $(docs_DATA) @$(NORMAL_INSTALL) $(mkinstalldirs) $(DESTDIR)$(docsdir) @list='$(docs_DATA)'; for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - f="`echo $$p | sed -e 's|^.*/||'`"; \ - echo " $(docsDATA_INSTALL) $$d$$p $(DESTDIR)$(docsdir)/$$f"; \ - $(docsDATA_INSTALL) $$d$$p $(DESTDIR)$(docsdir)/$$f; \ + if test -f $(srcdir)/$$p; then \ + echo " $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(docsdir)/$$p"; \ + $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(docsdir)/$$p; \ + else if test -f $$p; then \ + echo " $(INSTALL_DATA) $$p $(DESTDIR)$(docsdir)/$$p"; \ + $(INSTALL_DATA) $$p $(DESTDIR)$(docsdir)/$$p; \ + fi; fi; \ done uninstall-docsDATA: @$(NORMAL_UNINSTALL) - @list='$(docs_DATA)'; for p in $$list; do \ - f="`echo $$p | sed -e 's|^.*/||'`"; \ - echo " rm -f $(DESTDIR)$(docsdir)/$$f"; \ - rm -f $(DESTDIR)$(docsdir)/$$f; \ + list='$(docs_DATA)'; for p in $$list; do \ + rm -f $(DESTDIR)$(docsdir)/$$p; \ done # This directory's subdirectories are mostly independent; you can cd @@ -203,8 +200,13 @@ # (1) if the variable is set in `config.status', edit `config.status' # (which will cause the Makefiles to be regenerated when you run `make'); # (2) otherwise, pass the desired values on the `make' command line. -$(RECURSIVE_TARGETS): - @set fnord $$MAKEFLAGS; amf=$$2; \ + +@SET_MAKE@ + +all-recursive install-data-recursive install-exec-recursive \ +installdirs-recursive install-recursive uninstall-recursive \ +check-recursive installcheck-recursive info-recursive dvi-recursive: + @set fnord $(MAKEFLAGS); amf=$$2; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ @@ -224,18 +226,13 @@ mostlyclean-recursive clean-recursive distclean-recursive \ maintainer-clean-recursive: - @set fnord $$MAKEFLAGS; amf=$$2; \ + @set fnord $(MAKEFLAGS); amf=$$2; \ dot_seen=no; \ - case "$@" in \ - distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ - *) list='$(SUBDIRS)' ;; \ - esac; \ - rev=''; for subdir in $$list; do \ - if test "$$subdir" = "."; then :; else \ - rev="$$subdir $$rev"; \ - fi; \ + rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \ + rev="$$subdir $$rev"; \ + test "$$subdir" != "." || dot_seen=yes; \ done; \ - rev="$$rev ."; \ + test "$$dot_seen" = "no" && rev=". $$rev"; \ target=`echo $@ | sed s/-recursive//`; \ for subdir in $$rev; do \ echo "Making $$target in $$subdir"; \ @@ -252,234 +249,178 @@ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ done -ETAGS = etags -ETAGSFLAGS = - tags: TAGS -ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ +ID: $(HEADERS) $(SOURCES) $(LISP) + list='$(SOURCES) $(HEADERS)'; \ + unique=`for i in $$list; do echo $$i; done | \ + awk ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ - mkid -fID $$unique + here=`pwd` && cd $(srcdir) \ + && mkid -f$$here/ID $$unique $(LISP) -TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) +TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) $(LISP) tags=; \ here=`pwd`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ - if test "$$subdir" = .; then :; else \ + if test "$$subdir" = .; then :; else \ test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \ - fi; \ + fi; \ done; \ - list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ + list='$(SOURCES) $(HEADERS)'; \ + unique=`for i in $$list; do echo $$i; done | \ + awk ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ - test -z "$(ETAGS_ARGS)$$tags$$unique" \ - || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$tags $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && cd $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) $$here + test -z "$(ETAGS_ARGS)config.h.in$$unique$(LISP)$$tags" \ + || (cd $(srcdir) && etags -o $$here/TAGS $(ETAGS_ARGS) $$tags config.h.in $$unique $(LISP)) -distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +mostlyclean-tags: -top_distdir = . -distdir = $(PACKAGE)-$(VERSION) +clean-tags: -am__remove_distdir = \ - { test ! -d $(distdir) \ - || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \ - && rm -fr $(distdir); }; } +distclean-tags: + -rm -f TAGS ID -GZIP_ENV = --best -distcleancheck_listfiles = find . -type f -print +maintainer-clean-tags: + +distdir = $(PACKAGE)-$(VERSION) +top_distdir = $(distdir) +# This target untars the dist file and tries a VPATH configuration. Then +# it guarantees that the distribution is self-contained by making another +# tarfile. +distcheck: dist + -rm -rf $(distdir) + GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz + mkdir $(distdir)/=build + mkdir $(distdir)/=inst + dc_install_base=`cd $(distdir)/=inst && pwd`; \ + cd $(distdir)/=build \ + && ../configure --srcdir=.. --prefix=$$dc_install_base \ + && $(MAKE) $(AM_MAKEFLAGS) \ + && $(MAKE) $(AM_MAKEFLAGS) dvi \ + && $(MAKE) $(AM_MAKEFLAGS) check \ + && $(MAKE) $(AM_MAKEFLAGS) install \ + && $(MAKE) $(AM_MAKEFLAGS) installcheck \ + && $(MAKE) $(AM_MAKEFLAGS) dist + -rm -rf $(distdir) + @banner="$(distdir).tar.gz is ready for distribution"; \ + dashes=`echo "$$banner" | sed s/./=/g`; \ + echo "$$dashes"; \ + echo "$$banner"; \ + echo "$$dashes" +dist: distdir + -chmod -R a+r $(distdir) + GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir) + -rm -rf $(distdir) +dist-all: distdir + -chmod -R a+r $(distdir) + GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir) + -rm -rf $(distdir) distdir: $(DISTFILES) - $(am__remove_distdir) + -rm -rf $(distdir) mkdir $(distdir) - @list='$(DISTFILES)'; for file in $$list; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test "$$dir" != "$$file" && test "$$dir" != "."; then \ - dir="/$$dir"; \ - $(mkinstalldirs) "$(distdir)$$dir"; \ - else \ - dir=''; \ - fi; \ + -chmod 777 $(distdir) + here=`cd $(top_builddir) && pwd`; \ + top_distdir=`cd $(distdir) && pwd`; \ + distdir=`cd $(distdir) && pwd`; \ + cd $(top_srcdir) \ + && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu Makefile + @for file in $(DISTFILES); do \ + d=$(srcdir); \ if test -d $$d/$$file; then \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ - fi; \ - cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + cp -pr $$d/$$file $(distdir)/$$file; \ else \ test -f $(distdir)/$$file \ - || cp -p $$d/$$file $(distdir)/$$file \ - || exit 1; \ + || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ + || cp -p $$d/$$file $(distdir)/$$file || :; \ fi; \ done - list='$(SUBDIRS)'; for subdir in $$list; do \ + for subdir in $(SUBDIRS); do \ if test "$$subdir" = .; then :; else \ test -d $(distdir)/$$subdir \ || mkdir $(distdir)/$$subdir \ || exit 1; \ - (cd $$subdir && \ - $(MAKE) $(AM_MAKEFLAGS) \ - top_distdir="$(top_distdir)" \ - distdir=../$(distdir)/$$subdir \ - distdir) \ + chmod 777 $(distdir)/$$subdir; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(distdir) distdir=../$(distdir)/$$subdir distdir) \ || exit 1; \ fi; \ done - -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \ - ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ - ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ - ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \ - || chmod -R a+r $(distdir) -dist-gzip: distdir - $(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz - $(am__remove_distdir) - -dist dist-all: distdir - $(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz - $(am__remove_distdir) - -# This target untars the dist file and tries a VPATH configuration. Then -# it guarantees that the distribution is self-contained by making another -# tarfile. -distcheck: dist - $(am__remove_distdir) - GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(AMTAR) xf - - chmod -R a-w $(distdir); chmod a+w $(distdir) - mkdir $(distdir)/=build - mkdir $(distdir)/=inst - chmod a-w $(distdir) - dc_install_base=`$(am__cd) $(distdir)/=inst && pwd` \ - && cd $(distdir)/=build \ - && ../configure --srcdir=.. --prefix=$$dc_install_base \ - $(DISTCHECK_CONFIGURE_FLAGS) \ - && $(MAKE) $(AM_MAKEFLAGS) \ - && $(MAKE) $(AM_MAKEFLAGS) dvi \ - && $(MAKE) $(AM_MAKEFLAGS) check \ - && $(MAKE) $(AM_MAKEFLAGS) install \ - && $(MAKE) $(AM_MAKEFLAGS) installcheck \ - && $(MAKE) $(AM_MAKEFLAGS) uninstall \ - && (test `find $$dc_install_base -type f -print | wc -l` -le 1 \ - || { echo "ERROR: files left after uninstall:" ; \ - find $$dc_install_base -type f -print ; \ - exit 1; } >&2 ) \ - && $(MAKE) $(AM_MAKEFLAGS) dist-gzip \ - && rm -f $(distdir).tar.gz \ - && $(MAKE) $(AM_MAKEFLAGS) distcleancheck - $(am__remove_distdir) - @echo "$(distdir).tar.gz is ready for distribution" | \ - sed 'h;s/./=/g;p;x;p;x' -distcleancheck: distclean - if test '$(srcdir)' = . ; then \ - echo "ERROR: distcleancheck can only run from a VPATH build" ; \ - exit 1 ; \ - fi - test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ - || { echo "ERROR: files left after distclean:" ; \ - $(distcleancheck_listfiles) ; \ - exit 1; } >&2 +info-am: +info: info-recursive +dvi-am: +dvi: dvi-recursive check-am: all-am check: check-recursive -all-am: Makefile $(DATA) config.h -installdirs: installdirs-recursive -installdirs-am: - $(mkinstalldirs) $(DESTDIR)$(docsdir) +installcheck-am: +installcheck: installcheck-recursive +all-recursive-am: config.h + $(MAKE) $(AM_MAKEFLAGS) all-recursive -install: install-recursive +install-exec-am: install-exec: install-exec-recursive + +install-data-am: install-docsDATA install-data: install-data-recursive -uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-recursive +install: install-recursive +uninstall-am: uninstall-docsDATA +uninstall: uninstall-recursive +all-am: Makefile $(DATA) config.h +all-redirect: all-recursive-am install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install + $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install +installdirs: installdirs-recursive +installdirs-am: + $(mkinstalldirs) $(DESTDIR)$(docsdir) + + mostlyclean-generic: clean-generic: distclean-generic: -rm -f Makefile $(CONFIG_CLEAN_FILES) + -rm -f config.cache config.log stamp-h stamp-h[0-9]* maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-recursive - -clean-am: clean-generic clean-libtool mostlyclean-am - -distclean: distclean-recursive - -rm -f $(am__CONFIG_DISTCLEAN_FILES) -distclean-am: clean-am distclean-generic distclean-hdr distclean-libtool \ - distclean-tags - -dvi: dvi-recursive - -dvi-am: - -info: info-recursive +mostlyclean-am: mostlyclean-hdr mostlyclean-tags mostlyclean-generic -info-am: +mostlyclean: mostlyclean-recursive -install-data-am: install-docsDATA +clean-am: clean-hdr clean-tags clean-generic mostlyclean-am -install-exec-am: +clean: clean-recursive -install-info: install-info-recursive +distclean-am: distclean-hdr distclean-tags distclean-generic clean-am + -rm -f libtool -install-man: +distclean: distclean-recursive + -rm -f config.status -installcheck-am: +maintainer-clean-am: maintainer-clean-hdr maintainer-clean-tags \ + maintainer-clean-generic distclean-am + @echo "This command is intended for maintainers to use;" + @echo "it deletes files that may require special tools to rebuild." maintainer-clean: maintainer-clean-recursive - -rm -f $(am__CONFIG_DISTCLEAN_FILES) - -rm -rf autom4te.cache -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-recursive - -mostlyclean-am: mostlyclean-generic mostlyclean-libtool + -rm -f config.status -uninstall-am: uninstall-docsDATA uninstall-info-am - -uninstall-info: uninstall-info-recursive - -.PHONY: $(RECURSIVE_TARGETS) GTAGS all all-am check check-am clean \ - clean-generic clean-libtool clean-recursive dist dist-all \ - dist-gzip distcheck distclean distclean-generic distclean-hdr \ - distclean-libtool distclean-recursive distclean-tags \ - distcleancheck distdir dvi dvi-am dvi-recursive info info-am \ - info-recursive install install-am install-data install-data-am \ - install-data-recursive install-docsDATA install-exec \ - install-exec-am install-exec-recursive install-info \ - install-info-am install-info-recursive install-man \ - install-recursive install-strip installcheck installcheck-am \ - installdirs installdirs-am installdirs-recursive \ - maintainer-clean maintainer-clean-generic \ - maintainer-clean-recursive mostlyclean mostlyclean-generic \ - mostlyclean-libtool mostlyclean-recursive tags tags-recursive \ - uninstall uninstall-am uninstall-docsDATA uninstall-info-am \ - uninstall-info-recursive uninstall-recursive +.PHONY: mostlyclean-hdr distclean-hdr clean-hdr maintainer-clean-hdr \ +uninstall-docsDATA install-docsDATA install-data-recursive \ +uninstall-data-recursive install-exec-recursive \ +uninstall-exec-recursive installdirs-recursive uninstalldirs-recursive \ +all-recursive check-recursive installcheck-recursive info-recursive \ +dvi-recursive mostlyclean-recursive distclean-recursive clean-recursive \ +maintainer-clean-recursive tags tags-recursive mostlyclean-tags \ +distclean-tags clean-tags maintainer-clean-tags distdir info-am info \ +dvi-am dvi check check-am installcheck-am installcheck all-recursive-am \ +install-exec-am install-exec install-data-am install-data install-am \ +install uninstall-am uninstall all-redirect all-am all installdirs-am \ +installdirs mostlyclean-generic distclean-generic clean-generic \ +maintainer-clean-generic clean mostlyclean distclean maintainer-clean ############################################################################### @@ -513,6 +454,7 @@ && mail $(AUTHOR_EMAIL) -s "$(PACKAGE) $(VERSION) Registration" < REG_TMP_FILE \ && rm REG_TMP_FILE \ && echo "TSE3 registration email sent. Thankyou." + # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: --- tse3-0.2.7.orig/config.guess +++ tse3-0.2.7/config.guess @@ -1,9 +1,9 @@ #! /bin/sh # Attempt to guess a canonical system name. -# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 -# Free Software Foundation, Inc. +# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, +# 2000, 2001, 2002, 2003 Free Software Foundation, Inc. -timestamp='2001-09-04' +timestamp='2004-01-05' # This file is free software; you can redistribute it and/or modify it # under the terms of the GNU General Public License as published by @@ -24,8 +24,9 @@ # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. -# Written by Per Bothner . -# Please send patches to . +# Originally written by Per Bothner . +# Please send patches to . Submit a context +# diff and a properly formatted ChangeLog entry. # # This script attempts to guess a canonical system name similar to # config.sub. If it succeeds, it prints the system name on stdout, and @@ -87,30 +88,42 @@ exit 1 fi +trap 'exit 1' 1 2 15 -dummy=dummy-$$ -trap 'rm -f $dummy.c $dummy.o $dummy.rel $dummy; exit 1' 1 2 15 +# CC_FOR_BUILD -- compiler used by this script. Note that the use of a +# compiler to aid in system detection is discouraged as it requires +# temporary files to be created and, as you can see below, it is a +# headache to deal with in a portable fashion. -# CC_FOR_BUILD -- compiler used by this script. # Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still # use `HOST_CC' if defined, but it is deprecated. -set_cc_for_build='case $CC_FOR_BUILD,$HOST_CC,$CC in - ,,) echo "int dummy(){}" > $dummy.c ; - for c in cc gcc c89 ; do - ($c $dummy.c -c -o $dummy.o) >/dev/null 2>&1 ; - if test $? = 0 ; then +# Portable tmp directory creation inspired by the Autoconf team. + +set_cc_for_build=' +trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ; +trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ; +: ${TMPDIR=/tmp} ; + { tmp=`(umask 077 && mktemp -d -q "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } || + { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } || + { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } || + { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ; +dummy=$tmp/dummy ; +tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ; +case $CC_FOR_BUILD,$HOST_CC,$CC in + ,,) echo "int x;" > $dummy.c ; + for c in cc gcc c89 c99 ; do + if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then CC_FOR_BUILD="$c"; break ; fi ; done ; - rm -f $dummy.c $dummy.o $dummy.rel ; if test x"$CC_FOR_BUILD" = x ; then CC_FOR_BUILD=no_compiler_found ; fi ;; ,,*) CC_FOR_BUILD=$CC ;; ,*,*) CC_FOR_BUILD=$HOST_CC ;; -esac' +esac ;' # This is needed to find uname on a Pyramid OSx when run in the BSD universe. # (ghazi@noc.rutgers.edu 1994-08-24) @@ -127,29 +140,30 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in *:NetBSD:*:*) - # Netbsd (nbsd) targets should (where applicable) match one or + # NetBSD (nbsd) targets should (where applicable) match one or # more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*, # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently # switched to ELF, *-*-netbsd* would select the old # object file format. This provides both forward # compatibility and a consistent mechanism for selecting the # object file format. - # Determine the machine/vendor (is the vendor relevant). - case "${UNAME_MACHINE}" in - amiga) machine=m68k-unknown ;; - arm32) machine=arm-unknown ;; - atari*) machine=m68k-atari ;; - sun3*) machine=m68k-sun ;; - mac68k) machine=m68k-apple ;; - macppc) machine=powerpc-apple ;; - hp3[0-9][05]) machine=m68k-hp ;; - ibmrt|romp-ibm) machine=romp-ibm ;; - *) machine=${UNAME_MACHINE}-unknown ;; + # + # Note: NetBSD doesn't particularly care about the vendor + # portion of the name. We always set it to "unknown". + sysctl="sysctl -n hw.machine_arch" + UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \ + /usr/sbin/$sysctl 2>/dev/null || echo unknown)` + case "${UNAME_MACHINE_ARCH}" in + armeb) machine=armeb-unknown ;; + arm*) machine=arm-unknown ;; + sh3el) machine=shl-unknown ;; + sh3eb) machine=sh-unknown ;; + *) machine=${UNAME_MACHINE_ARCH}-unknown ;; esac # The Operating System including object format, if it has switched # to ELF recently, or will in the future. - case "${UNAME_MACHINE}" in - i386|sparc|amiga|arm*|hp300|mvme68k|vax|atari|luna68k|mac68k|news68k|next68k|pc532|sun3*|x68k) + case "${UNAME_MACHINE_ARCH}" in + arm*|i386|m68k|ns32k|sh3*|sparc|vax) eval $set_cc_for_build if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \ | grep __ELF__ >/dev/null @@ -166,75 +180,115 @@ ;; esac # The OS release - release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` + # Debian GNU/NetBSD machines have a different userland, and + # thus, need a distinct triplet. However, they do not need + # kernel version information, so it can be replaced with a + # suitable tag, in the style of linux-gnu. + case "${UNAME_VERSION}" in + Debian*) + release='-gnu' + ;; + *) + release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` + ;; + esac # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM: # contains redundant information, the shorter form: # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used. echo "${machine}-${os}${release}" exit 0 ;; + amiga:OpenBSD:*:*) + echo m68k-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + arc:OpenBSD:*:*) + echo mipsel-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + hp300:OpenBSD:*:*) + echo m68k-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + mac68k:OpenBSD:*:*) + echo m68k-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + macppc:OpenBSD:*:*) + echo powerpc-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + mvme68k:OpenBSD:*:*) + echo m68k-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + mvme88k:OpenBSD:*:*) + echo m88k-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + mvmeppc:OpenBSD:*:*) + echo powerpc-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + pegasos:OpenBSD:*:*) + echo powerpc-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + pmax:OpenBSD:*:*) + echo mipsel-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + sgi:OpenBSD:*:*) + echo mipseb-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + sun3:OpenBSD:*:*) + echo m68k-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + wgrisc:OpenBSD:*:*) + echo mipsel-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + *:OpenBSD:*:*) + echo ${UNAME_MACHINE}-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; alpha:OSF1:*:*) if test $UNAME_RELEASE = "V4.0"; then UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'` fi + # According to Compaq, /usr/sbin/psrinfo has been available on + # OSF/1 and Tru64 systems produced since 1995. I hope that + # covers most systems running today. This code pipes the CPU + # types through head -n 1, so we only detect the type of CPU 0. + ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1` + case "$ALPHA_CPU_TYPE" in + "EV4 (21064)") + UNAME_MACHINE="alpha" ;; + "EV4.5 (21064)") + UNAME_MACHINE="alpha" ;; + "LCA4 (21066/21068)") + UNAME_MACHINE="alpha" ;; + "EV5 (21164)") + UNAME_MACHINE="alphaev5" ;; + "EV5.6 (21164A)") + UNAME_MACHINE="alphaev56" ;; + "EV5.6 (21164PC)") + UNAME_MACHINE="alphapca56" ;; + "EV5.7 (21164PC)") + UNAME_MACHINE="alphapca57" ;; + "EV6 (21264)") + UNAME_MACHINE="alphaev6" ;; + "EV6.7 (21264A)") + UNAME_MACHINE="alphaev67" ;; + "EV6.8CB (21264C)") + UNAME_MACHINE="alphaev68" ;; + "EV6.8AL (21264B)") + UNAME_MACHINE="alphaev68" ;; + "EV6.8CX (21264D)") + UNAME_MACHINE="alphaev68" ;; + "EV6.9A (21264/EV69A)") + UNAME_MACHINE="alphaev69" ;; + "EV7 (21364)") + UNAME_MACHINE="alphaev7" ;; + "EV7.9 (21364A)") + UNAME_MACHINE="alphaev79" ;; + esac # A Vn.n version is a released version. # A Tn.n version is a released field test version. # A Xn.n version is an unreleased experimental baselevel. # 1.2 uses "1.2" for uname -r. - cat <$dummy.s - .data -\$Lformat: - .byte 37,100,45,37,120,10,0 # "%d-%x\n" - - .text - .globl main - .align 4 - .ent main -main: - .frame \$30,16,\$26,0 - ldgp \$29,0(\$27) - .prologue 1 - .long 0x47e03d80 # implver \$0 - lda \$2,-1 - .long 0x47e20c21 # amask \$2,\$1 - lda \$16,\$Lformat - mov \$0,\$17 - not \$1,\$18 - jsr \$26,printf - ldgp \$29,0(\$26) - mov 0,\$16 - jsr \$26,exit - .end main -EOF - eval $set_cc_for_build - $CC_FOR_BUILD $dummy.s -o $dummy 2>/dev/null - if test "$?" = 0 ; then - case `./$dummy` in - 0-0) - UNAME_MACHINE="alpha" - ;; - 1-0) - UNAME_MACHINE="alphaev5" - ;; - 1-1) - UNAME_MACHINE="alphaev56" - ;; - 1-101) - UNAME_MACHINE="alphapca56" - ;; - 2-303) - UNAME_MACHINE="alphaev6" - ;; - 2-307) - UNAME_MACHINE="alphaev67" - ;; - 2-1307) - UNAME_MACHINE="alphaev68" - ;; - esac - fi - rm -f $dummy.s $dummy echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[VTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` exit 0 ;; + Alpha*:OpenVMS:*:*) + echo alpha-hp-vms + exit 0 ;; Alpha\ *:Windows_NT*:*) # How do we know it's Interix rather than the generic POSIX subsystem? # Should we change UNAME_MACHINE based on the output of uname instead @@ -247,33 +301,18 @@ Amiga*:UNIX_System_V:4.0:*) echo m68k-unknown-sysv4 exit 0;; - amiga:OpenBSD:*:*) - echo m68k-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; *:[Aa]miga[Oo][Ss]:*:*) echo ${UNAME_MACHINE}-unknown-amigaos exit 0 ;; - arc64:OpenBSD:*:*) - echo mips64el-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - arc:OpenBSD:*:*) - echo mipsel-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - hkmips:OpenBSD:*:*) - echo mips-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - pmax:OpenBSD:*:*) - echo mipsel-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - sgi:OpenBSD:*:*) - echo mips-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - wgrisc:OpenBSD:*:*) - echo mipsel-unknown-openbsd${UNAME_RELEASE} + *:[Mm]orph[Oo][Ss]:*:*) + echo ${UNAME_MACHINE}-unknown-morphos exit 0 ;; *:OS/390:*:*) echo i370-ibm-openedition exit 0 ;; + *:OS400:*:*) + echo powerpc-ibm-os400 + exit 0 ;; arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*) echo arm-acorn-riscix${UNAME_RELEASE} exit 0;; @@ -291,6 +330,13 @@ NILE*:*:*:dcosx) echo pyramid-pyramid-svr4 exit 0 ;; + DRS?6000:unix:4.0:6*) + echo sparc-icl-nx6 + exit 0 ;; + DRS?6000:UNIX_SV:4.2*:7*) + case `/usr/bin/uname -p` in + sparc) echo sparc-icl-nx7 && exit 0 ;; + esac ;; sun4H:SunOS:5.*:*) echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit 0 ;; @@ -319,7 +365,7 @@ echo m68k-sun-sunos${UNAME_RELEASE} exit 0 ;; sun*:*:4.2BSD:*) - UNAME_RELEASE=`(head -1 /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` + UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3 case "`/bin/arch`" in sun3) @@ -333,12 +379,6 @@ aushp:SunOS:*:*) echo sparc-auspex-sunos${UNAME_RELEASE} exit 0 ;; - sparc*:NetBSD:*) - echo `uname -p`-unknown-netbsd${UNAME_RELEASE} - exit 0 ;; - atari*:OpenBSD:*:*) - echo m68k-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; # The situation for MiNT is a little confusing. The machine name # can be virtually everything (everything which is not # "atarist" or "atariste" at least should have a processor @@ -365,18 +405,6 @@ *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*) echo m68k-unknown-mint${UNAME_RELEASE} exit 0 ;; - sun3*:OpenBSD:*:*) - echo m68k-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - mac68k:OpenBSD:*:*) - echo m68k-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - mvme68k:OpenBSD:*:*) - echo m68k-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - mvme88k:OpenBSD:*:*) - echo m88k-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; powerpc:machten:*:*) echo powerpc-apple-machten${UNAME_RELEASE} exit 0 ;; @@ -415,15 +443,20 @@ exit (-1); } EOF - $CC_FOR_BUILD $dummy.c -o $dummy \ - && ./$dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \ - && rm -f $dummy.c $dummy && exit 0 - rm -f $dummy.c $dummy + $CC_FOR_BUILD -o $dummy $dummy.c \ + && $dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \ + && exit 0 echo mips-mips-riscos${UNAME_RELEASE} exit 0 ;; Motorola:PowerMAX_OS:*:*) echo powerpc-motorola-powermax exit 0 ;; + Motorola:*:4.3:PL8-*) + echo powerpc-harris-powermax + exit 0 ;; + Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*) + echo powerpc-harris-powermax + exit 0 ;; Night_Hawk:Power_UNIX:*:*) echo powerpc-harris-powerunix exit 0 ;; @@ -496,8 +529,7 @@ exit(0); } EOF - $CC_FOR_BUILD $dummy.c -o $dummy && ./$dummy && rm -f $dummy.c $dummy && exit 0 - rm -f $dummy.c $dummy + $CC_FOR_BUILD -o $dummy $dummy.c && $dummy && exit 0 echo rs6000-ibm-aix3.2.5 elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then echo rs6000-ibm-aix3.2.4 @@ -506,7 +538,7 @@ fi exit 0 ;; *:AIX:*:[45]) - IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | head -1 | awk '{ print $1 }'` + IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'` if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then IBM_ARCH=rs6000 else @@ -546,10 +578,8 @@ 9000/31? ) HP_ARCH=m68000 ;; 9000/[34]?? ) HP_ARCH=m68k ;; 9000/[678][0-9][0-9]) - case "${HPUX_REV}" in - 11.[0-9][0-9]) - if [ -x /usr/bin/getconf ]; then - sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null` + if [ -x /usr/bin/getconf ]; then + sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null` sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null` case "${sc_cpu_version}" in 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0 @@ -558,13 +588,13 @@ case "${sc_kernel_bits}" in 32) HP_ARCH="hppa2.0n" ;; 64) HP_ARCH="hppa2.0w" ;; + '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20 esac ;; esac - fi ;; - esac - if [ "${HP_ARCH}" = "" ]; then - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c + fi + if [ "${HP_ARCH}" = "" ]; then + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c #define _HPUX_SOURCE #include @@ -597,11 +627,21 @@ exit (0); } EOF - (CCOPTS= $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null ) && HP_ARCH=`./$dummy` - if test -z "$HP_ARCH"; then HP_ARCH=hppa; fi - rm -f $dummy.c $dummy - fi ;; + (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy` + test -z "$HP_ARCH" && HP_ARCH=hppa + fi ;; esac + if [ ${HP_ARCH} = "hppa2.0w" ] + then + # avoid double evaluation of $set_cc_for_build + test -n "$CC_FOR_BUILD" || eval $set_cc_for_build + if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E -) | grep __LP64__ >/dev/null + then + HP_ARCH="hppa2.0w" + else + HP_ARCH="hppa64" + fi + fi echo ${HP_ARCH}-hp-hpux${HPUX_REV} exit 0 ;; ia64:HP-UX:*:*) @@ -635,8 +675,7 @@ exit (0); } EOF - $CC_FOR_BUILD $dummy.c -o $dummy && ./$dummy && rm -f $dummy.c $dummy && exit 0 - rm -f $dummy.c $dummy + $CC_FOR_BUILD -o $dummy $dummy.c && $dummy && exit 0 echo unknown-hitachi-hiuxwe2 exit 0 ;; 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* ) @@ -664,9 +703,6 @@ parisc*:Lites*:*:*) echo hppa1.1-hp-lites exit 0 ;; - hppa*:OpenBSD:*:*) - echo hppa-unknown-openbsd - exit 0 ;; C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*) echo c1-convex-bsd exit 0 ;; @@ -685,9 +721,6 @@ C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*) echo c4-convex-bsd exit 0 ;; - CRAY*X-MP:*:*:*) - echo xmp-cray-unicos - exit 0 ;; CRAY*Y-MP:*:*:*) echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' exit 0 ;; @@ -700,26 +733,25 @@ CRAY*TS:*:*:*) echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' exit 0 ;; - CRAY*T3D:*:*:*) - echo alpha-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit 0 ;; CRAY*T3E:*:*:*) echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' exit 0 ;; CRAY*SV1:*:*:*) echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' exit 0 ;; - CRAY-2:*:*:*) - echo cray2-cray-unicos - exit 0 ;; + *:UNICOS/mp:*:*) + echo nv1-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit 0 ;; F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*) FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'` echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" exit 0 ;; - hp300:OpenBSD:*:*) - echo m68k-unknown-openbsd${UNAME_RELEASE} + 5000:UNIX_System_V:4.*:*) + FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` + FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'` + echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" exit 0 ;; i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*) echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE} @@ -731,10 +763,21 @@ echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE} exit 0 ;; *:FreeBSD:*:*) - echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` - exit 0 ;; - *:OpenBSD:*:*) - echo ${UNAME_MACHINE}-unknown-openbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` + # Determine whether the default compiler uses glibc. + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #include + #if __GLIBC__ >= 2 + LIBC=gnu + #else + LIBC= + #endif +EOF + eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=` + # GNU/KFreeBSD systems have a "k" prefix to indicate we are using + # FreeBSD's kernel, but not the complete OS. + case ${LIBC} in gnu) kernel_only='k' ;; esac + echo ${UNAME_MACHINE}-unknown-${kernel_only}freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`${LIBC:+-$LIBC} exit 0 ;; i*:CYGWIN*:*) echo ${UNAME_MACHINE}-pc-cygwin @@ -745,11 +788,17 @@ i*:PW*:*) echo ${UNAME_MACHINE}-pc-pw32 exit 0 ;; + x86:Interix*:[34]*) + echo i586-pc-interix${UNAME_RELEASE}|sed -e 's/\..*//' + exit 0 ;; + [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*) + echo i${UNAME_MACHINE}-pc-mks + exit 0 ;; i*:Windows_NT*:* | Pentium*:Windows_NT*:*) # How do we know it's Interix rather than the generic POSIX subsystem? # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we # UNAME_MACHINE based on the output of uname instead of i386? - echo i386-pc-interix + echo i586-pc-interix exit 0 ;; i*:UWIN*:*) echo ${UNAME_MACHINE}-pc-uwin @@ -761,25 +810,65 @@ echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit 0 ;; *:GNU:*:*) + # the GNU system echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'` exit 0 ;; + *:GNU/*:*:*) + # other systems with GNU libc and userland + echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu + exit 0 ;; i*86:Minix:*:*) echo ${UNAME_MACHINE}-pc-minix exit 0 ;; arm*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu exit 0 ;; + cris:Linux:*:*) + echo cris-axis-linux-gnu + exit 0 ;; ia64:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux + echo ${UNAME_MACHINE}-unknown-linux-gnu exit 0 ;; m68*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu exit 0 ;; mips:Linux:*:*) - case `sed -n '/^byte/s/^.*: \(.*\) endian/\1/p' < /proc/cpuinfo` in - big) echo mips-unknown-linux-gnu && exit 0 ;; - little) echo mipsel-unknown-linux-gnu && exit 0 ;; - esac + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #undef CPU + #undef mips + #undef mipsel + #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) + CPU=mipsel + #else + #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) + CPU=mips + #else + CPU= + #endif + #endif +EOF + eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=` + test x"${CPU}" != x && echo "${CPU}-unknown-linux-gnu" && exit 0 + ;; + mips64:Linux:*:*) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #undef CPU + #undef mips64 + #undef mips64el + #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) + CPU=mips64el + #else + #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) + CPU=mips64 + #else + CPU= + #endif + #endif +EOF + eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=` + test x"${CPU}" != x && echo "${CPU}-unknown-linux-gnu" && exit 0 ;; ppc:Linux:*:*) echo powerpc-unknown-linux-gnu @@ -815,6 +904,9 @@ s390:Linux:*:* | s390x:Linux:*:*) echo ${UNAME_MACHINE}-ibm-linux exit 0 ;; + sh64*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit 0 ;; sh*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu exit 0 ;; @@ -828,7 +920,8 @@ # The BFD linker knows what the default object file format is, so # first see if it will tell us. cd to the root directory to prevent # problems with other programs or directories called `ld' in the path. - ld_supported_targets=`cd /; ld --help 2>&1 \ + # Set LC_ALL=C to ensure ld outputs messages in English. + ld_supported_targets=`cd /; LC_ALL=C ld --help 2>&1 \ | sed -ne '/supported targets:/!d s/[ ][ ]*/ /g s/.*supported targets: *// @@ -840,7 +933,7 @@ ;; a.out-i386-linux) echo "${UNAME_MACHINE}-pc-linux-gnuaout" - exit 0 ;; + exit 0 ;; coff-i386) echo "${UNAME_MACHINE}-pc-linux-gnucoff" exit 0 ;; @@ -852,32 +945,31 @@ esac # Determine whether the default compiler is a.out or elf eval $set_cc_for_build - cat >$dummy.c < -#ifdef __cplusplus -#include /* for printf() prototype */ - int main (int argc, char *argv[]) { -#else - int main (argc, argv) int argc; char *argv[]; { -#endif -#ifdef __ELF__ -# ifdef __GLIBC__ -# if __GLIBC__ >= 2 - printf ("%s-pc-linux-gnu\n", argv[1]); -# else - printf ("%s-pc-linux-gnulibc1\n", argv[1]); -# endif -# else - printf ("%s-pc-linux-gnulibc1\n", argv[1]); -# endif -#else - printf ("%s-pc-linux-gnuaout\n", argv[1]); -#endif - return 0; -} + sed 's/^ //' << EOF >$dummy.c + #include + #ifdef __ELF__ + # ifdef __GLIBC__ + # if __GLIBC__ >= 2 + LIBC=gnu + # else + LIBC=gnulibc1 + # endif + # else + LIBC=gnulibc1 + # endif + #else + #ifdef __INTEL_COMPILER + LIBC=gnu + #else + LIBC=gnuaout + #endif + #endif + #ifdef __dietlibc__ + LIBC=dietlibc + #endif EOF - $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy "${UNAME_MACHINE}" && rm -f $dummy.c $dummy && exit 0 - rm -f $dummy.c $dummy + eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=` + test x"${LIBC}" != x && echo "${UNAME_MACHINE}-pc-linux-${LIBC}" && exit 0 test x"${TENTATIVE}" != x && echo "${TENTATIVE}" && exit 0 ;; i*86:DYNIX/ptx:4*:*) @@ -894,6 +986,26 @@ # Use sysv4.2uw... so that sysv4* matches it. echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION} exit 0 ;; + i*86:OS/2:*:*) + # If we were able to find `uname', then EMX Unix compatibility + # is probably installed. + echo ${UNAME_MACHINE}-pc-os2-emx + exit 0 ;; + i*86:XTS-300:*:STOP) + echo ${UNAME_MACHINE}-unknown-stop + exit 0 ;; + i*86:atheos:*:*) + echo ${UNAME_MACHINE}-unknown-atheos + exit 0 ;; + i*86:syllable:*:*) + echo ${UNAME_MACHINE}-pc-syllable + exit 0 ;; + i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*) + echo i386-unknown-lynxos${UNAME_RELEASE} + exit 0 ;; + i*86:*DOS:*:*) + echo ${UNAME_MACHINE}-pc-msdosdjgpp + exit 0 ;; i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*) UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'` if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then @@ -915,22 +1027,19 @@ UNAME_REL=`sed -n 's/.*Version //p' /dev/null >/dev/null ; then - UNAME_REL=`(/bin/uname -X|egrep Release|sed -e 's/.*= //')` - (/bin/uname -X|egrep i80486 >/dev/null) && UNAME_MACHINE=i486 - (/bin/uname -X|egrep '^Machine.*Pentium' >/dev/null) \ + UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')` + (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486 + (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \ && UNAME_MACHINE=i586 - (/bin/uname -X|egrep '^Machine.*Pent ?II' >/dev/null) \ + (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \ && UNAME_MACHINE=i686 - (/bin/uname -X|egrep '^Machine.*Pentium Pro' >/dev/null) \ + (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \ && UNAME_MACHINE=i686 echo ${UNAME_MACHINE}-pc-sco$UNAME_REL else echo ${UNAME_MACHINE}-pc-sysv32 fi exit 0 ;; - i*86:*DOS:*:*) - echo ${UNAME_MACHINE}-pc-msdosdjgpp - exit 0 ;; pc:*:*:*) # Left here for compatibility: # uname -m prints for DJGPP always 'pc', but it prints nothing about @@ -954,9 +1063,15 @@ # "miniframe" echo m68010-convergent-sysv exit 0 ;; + mc68k:UNIX:SYSTEM5:3.51m) + echo m68k-convergent-sysv + exit 0 ;; + M680?0:D-NIX:5.3:*) + echo m68k-diab-dnix + exit 0 ;; M68*:*:R3V[567]*:*) test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;; - 3[34]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 4850:*:4.0:3.0) + 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0) OS_REL='' test -r /etc/.relid \ && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` @@ -973,9 +1088,6 @@ mc68030:UNIX_System_V:4.*:*) echo m68k-atari-sysv4 exit 0 ;; - i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*) - echo i386-unknown-lynxos${UNAME_RELEASE} - exit 0 ;; TSUNAMI:LynxOS:2.*:*) echo sparc-unknown-lynxos${UNAME_RELEASE} exit 0 ;; @@ -1047,6 +1159,9 @@ SX-5:SUPER-UX:*:*) echo sx5-nec-superux${UNAME_RELEASE} exit 0 ;; + SX-6:SUPER-UX:*:*) + echo sx6-nec-superux${UNAME_RELEASE} + exit 0 ;; Power*:Rhapsody:*:*) echo powerpc-apple-rhapsody${UNAME_RELEASE} exit 0 ;; @@ -1054,18 +1169,24 @@ echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE} exit 0 ;; *:Darwin:*:*) - echo `uname -p`-apple-darwin${UNAME_RELEASE} + case `uname -p` in + *86) UNAME_PROCESSOR=i686 ;; + powerpc) UNAME_PROCESSOR=powerpc ;; + esac + echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE} exit 0 ;; *:procnto*:*:* | *:QNX:[0123456789]*:*) - if test "${UNAME_MACHINE}" = "x86pc"; then + UNAME_PROCESSOR=`uname -p` + if test "$UNAME_PROCESSOR" = "x86"; then + UNAME_PROCESSOR=i386 UNAME_MACHINE=pc fi - echo `uname -p`-${UNAME_MACHINE}-nto-qnx + echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE} exit 0 ;; *:QNX:*:4*) echo i386-pc-qnx exit 0 ;; - NSR-[KW]:NONSTOP_KERNEL:*:*) + NSR-?:NONSTOP_KERNEL:*:*) echo nsr-tandem-nsk${UNAME_RELEASE} exit 0 ;; *:NonStop-UX:*:*) @@ -1088,11 +1209,6 @@ fi echo ${UNAME_MACHINE}-unknown-plan9 exit 0 ;; - i*86:OS/2:*:*) - # If we were able to find `uname', then EMX Unix compatibility - # is probably installed. - echo ${UNAME_MACHINE}-pc-os2-emx - exit 0 ;; *:TOPS-10:*:*) echo pdp10-unknown-tops10 exit 0 ;; @@ -1111,11 +1227,11 @@ *:ITS:*:*) echo pdp10-unknown-its exit 0 ;; - i*86:XTS-300:*:STOP) - echo ${UNAME_MACHINE}-unknown-stop + SEI:*:*:SEIUX) + echo mips-sei-seiux${UNAME_RELEASE} exit 0 ;; - i*86:atheos:*:*) - echo ${UNAME_MACHINE}-unknown-atheos + *:DRAGONFLY:*:*) + echo ${UNAME_MACHINE}-unknown-dragonfly${UNAME_RELEASE} exit 0 ;; esac @@ -1237,8 +1353,7 @@ } EOF -$CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy && rm -f $dummy.c $dummy && exit 0 -rm -f $dummy.c $dummy +$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && $dummy && exit 0 # Apollos put the system type in the environment. --- tse3-0.2.7.orig/config.sub +++ tse3-0.2.7/config.sub @@ -1,9 +1,9 @@ #! /bin/sh # Configuration validation subroutine script. -# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 -# Free Software Foundation, Inc. +# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, +# 2000, 2001, 2002, 2003 Free Software Foundation, Inc. -timestamp='2001-09-07' +timestamp='2004-01-05' # This file is (in principle) common to ALL GNU software. # The presence of a machine in this file suggests that SOME GNU software @@ -29,7 +29,8 @@ # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. -# Please send patches to . +# Please send patches to . Submit a context +# diff and a properly formatted ChangeLog entry. # # Configuration subroutine to validate and canonicalize a configuration type. # Supply the specified configuration type as an argument. @@ -117,7 +118,8 @@ # Here we must recognize all the valid KERNEL-OS combinations. maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'` case $maybe_os in - nto-qnx* | linux-gnu* | storm-chaos* | os2-emx* | windows32-*) + nto-qnx* | linux-gnu* | linux-dietlibc | linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | \ + kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | storm-chaos* | os2-emx* | rtmk-nova*) os=-$maybe_os basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'` ;; @@ -226,32 +228,46 @@ 1750a | 580 \ | a29k \ | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \ + | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \ + | am33_2.0 \ | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr \ | c4x | clipper \ - | d10v | d30v | dsp16xx \ - | fr30 \ + | d10v | d30v | dlx | dsp16xx \ + | fr30 | frv \ | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \ | i370 | i860 | i960 | ia64 \ + | ip2k | iq2000 \ | m32r | m68000 | m68k | m88k | mcore \ - | mips16 | mips64 | mips64el | mips64orion | mips64orionel \ - | mips64vr4100 | mips64vr4100el | mips64vr4300 \ - | mips64vr4300el | mips64vr5000 | mips64vr5000el \ - | mipsbe | mipseb | mipsel | mipsle | mipstx39 | mipstx39el \ - | mipsisa32 \ + | mips | mipsbe | mipseb | mipsel | mipsle \ + | mips16 \ + | mips64 | mips64el \ + | mips64vr | mips64vrel \ + | mips64orion | mips64orionel \ + | mips64vr4100 | mips64vr4100el \ + | mips64vr4300 | mips64vr4300el \ + | mips64vr5000 | mips64vr5000el \ + | mipsisa32 | mipsisa32el \ + | mipsisa32r2 | mipsisa32r2el \ + | mipsisa64 | mipsisa64el \ + | mipsisa64r2 | mipsisa64r2el \ + | mipsisa64sb1 | mipsisa64sb1el \ + | mipsisa64sr71k | mipsisa64sr71kel \ + | mipstx39 | mipstx39el \ | mn10200 | mn10300 \ + | msp430 \ | ns16k | ns32k \ - | openrisc \ + | openrisc | or32 \ | pdp10 | pdp11 | pj | pjl \ | powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \ | pyramid \ - | s390 | s390x \ - | sh | sh[34] | sh[34]eb | shbe | shle \ - | sparc | sparc64 | sparclet | sparclite | sparcv9 | sparcv9b \ - | stormy16 | strongarm \ - | tahoe | thumb | tic80 | tron \ - | v850 \ + | sh | sh[1234] | sh[23]e | sh[34]eb | shbe | shle | sh[1234]le | sh3ele \ + | sh64 | sh64le \ + | sparc | sparc64 | sparc86x | sparclet | sparclite | sparcv9 | sparcv9b \ + | strongarm \ + | tahoe | thumb | tic4x | tic80 | tron \ + | v850 | v850e \ | we32k \ - | x86 | xscale \ + | x86 | xscale | xstormy16 | xtensa \ | z8k) basic_machine=$basic_machine-unknown ;; @@ -278,38 +294,56 @@ 580-* \ | a29k-* \ | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \ - | alphapca5[67]-* | arc-* \ - | arm-* | armbe-* | armle-* | armv*-* \ + | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \ + | alphapca5[67]-* | alpha64pca5[67]-* | arc-* \ + | arm-* | armbe-* | armle-* | armeb-* | armv*-* \ + | avr-* \ | bs2000-* \ - | c[123]* | c30-* | [cjt]90-* | c54x-* \ - | clipper-* | cray2-* | cydra-* \ - | d10v-* | d30v-* \ + | c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \ + | clipper-* | cydra-* \ + | d10v-* | d30v-* | dlx-* \ | elxsi-* \ - | f30[01]-* | f700-* | fr30-* | fx80-* \ + | f30[01]-* | f700-* | fr30-* | frv-* | fx80-* \ | h8300-* | h8500-* \ | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \ | i*86-* | i860-* | i960-* | ia64-* \ + | ip2k-* | iq2000-* \ | m32r-* \ - | m68000-* | m680[01234]0-* | m68360-* | m683?2-* | m68k-* \ + | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \ | m88110-* | m88k-* | mcore-* \ - | mips-* | mips16-* | mips64-* | mips64el-* | mips64orion-* \ - | mips64orionel-* | mips64vr4100-* | mips64vr4100el-* \ - | mips64vr4300-* | mips64vr4300el-* | mipsbe-* | mipseb-* \ - | mipsle-* | mipsel-* | mipstx39-* | mipstx39el-* \ - | none-* | np1-* | ns16k-* | ns32k-* \ + | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \ + | mips16-* \ + | mips64-* | mips64el-* \ + | mips64vr-* | mips64vrel-* \ + | mips64orion-* | mips64orionel-* \ + | mips64vr4100-* | mips64vr4100el-* \ + | mips64vr4300-* | mips64vr4300el-* \ + | mips64vr5000-* | mips64vr5000el-* \ + | mipsisa32-* | mipsisa32el-* \ + | mipsisa32r2-* | mipsisa32r2el-* \ + | mipsisa64-* | mipsisa64el-* \ + | mipsisa64r2-* | mipsisa64r2el-* \ + | mipsisa64sb1-* | mipsisa64sb1el-* \ + | mipsisa64sr71k-* | mipsisa64sr71kel-* \ + | mipstx39-* | mipstx39el-* \ + | msp430-* \ + | none-* | np1-* | nv1-* | ns16k-* | ns32k-* \ | orion-* \ | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \ | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \ | pyramid-* \ | romp-* | rs6000-* \ - | s390-* | s390x-* \ - | sh-* | sh[34]-* | sh[34]eb-* | shbe-* | shle-* \ - | sparc-* | sparc64-* | sparc86x-* | sparclite-* \ - | sparcv9-* | sparcv9b-* | stormy16-* | strongarm-* | sv1-* \ - | t3e-* | tahoe-* | thumb-* | tic30-* | tic54x-* | tic80-* | tron-* \ - | v850-* | vax-* \ + | sh-* | sh[1234]-* | sh[23]e-* | sh[34]eb-* | shbe-* \ + | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \ + | sparc-* | sparc64-* | sparc86x-* | sparclet-* | sparclite-* \ + | sparcv9-* | sparcv9b-* | strongarm-* | sv1-* | sx?-* \ + | tahoe-* | thumb-* \ + | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \ + | tron-* \ + | v850-* | v850e-* | vax-* \ | we32k-* \ - | x86-* | x86_64-* | xmp-* | xps100-* | xscale-* \ + | x86-* | x86_64-* | xps100-* | xscale-* | xstormy16-* \ + | xtensa-* \ | ymp-* \ | z8k-*) ;; @@ -343,6 +377,12 @@ basic_machine=a29k-none os=-bsd ;; + amd64) + basic_machine=x86_64-pc + ;; + amd64-*) + basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; amdahl) basic_machine=580-amdahl os=-sysv @@ -374,6 +414,10 @@ basic_machine=ns32k-sequent os=-dynix ;; + c90) + basic_machine=c90-cray + os=-unicos + ;; convex-c1) basic_machine=c1-convex os=-bsd @@ -394,16 +438,8 @@ basic_machine=c38-convex os=-bsd ;; - cray | ymp) - basic_machine=ymp-cray - os=-unicos - ;; - cray2) - basic_machine=cray2-cray - os=-unicos - ;; - [cjt]90) - basic_machine=${basic_machine}-cray + cray | j90) + basic_machine=j90-cray os=-unicos ;; crds | unos) @@ -418,6 +454,14 @@ decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn) basic_machine=mips-dec ;; + decsystem10* | dec10*) + basic_machine=pdp10-dec + os=-tops10 + ;; + decsystem20* | dec20*) + basic_machine=pdp10-dec + os=-tops20 + ;; delta | 3300 | motorola-3300 | motorola-delta \ | 3300-motorola | delta-motorola) basic_machine=m68k-motorola @@ -598,14 +642,6 @@ basic_machine=m68k-atari os=-mint ;; - mipsel*-linux*) - basic_machine=mipsel-unknown - os=-linux-gnu - ;; - mips*-linux*) - basic_machine=mips-unknown - os=-linux-gnu - ;; mips3*-*) basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'` ;; @@ -620,6 +656,10 @@ basic_machine=m68k-rom68k os=-coff ;; + morphos) + basic_machine=powerpc-unknown + os=-morphos + ;; msdos) basic_machine=i386-pc os=-msdos @@ -692,6 +732,10 @@ np1) basic_machine=np1-gould ;; + nv1) + basic_machine=nv1-cray + os=-unicosmp + ;; nsr-tandem) basic_machine=nsr-tandem ;; @@ -699,6 +743,14 @@ basic_machine=hppa1.1-oki os=-proelf ;; + or32 | or32-*) + basic_machine=or32-unknown + os=-coff + ;; + os400) + basic_machine=powerpc-ibm + os=-os400 + ;; OSE68000 | ose68000) basic_machine=m68000-ericsson os=-ose @@ -721,49 +773,55 @@ pbb) basic_machine=m68k-tti ;; - pc532 | pc532-*) + pc532 | pc532-*) basic_machine=ns32k-pc532 ;; - pentium | p5 | k5 | k6 | nexgen) + pentium | p5 | k5 | k6 | nexgen | viac3) basic_machine=i586-pc ;; - pentiumpro | p6 | 6x86 | athlon) + pentiumpro | p6 | 6x86 | athlon | athlon_*) basic_machine=i686-pc ;; - pentiumii | pentium2) + pentiumii | pentium2 | pentiumiii | pentium3) basic_machine=i686-pc ;; - pentium-* | p5-* | k5-* | k6-* | nexgen-*) + pentium4) + basic_machine=i786-pc + ;; + pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*) basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'` ;; pentiumpro-* | p6-* | 6x86-* | athlon-*) basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` ;; - pentiumii-* | pentium2-*) + pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*) basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` ;; + pentium4-*) + basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; pn) basic_machine=pn-gould ;; power) basic_machine=power-ibm ;; ppc) basic_machine=powerpc-unknown - ;; + ;; ppc-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'` ;; ppcle | powerpclittle | ppc-le | powerpc-little) basic_machine=powerpcle-unknown - ;; + ;; ppcle-* | powerpclittle-*) basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'` ;; ppc64) basic_machine=powerpc64-unknown - ;; + ;; ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'` ;; ppc64le | powerpc64little | ppc64-le | powerpc64-little) basic_machine=powerpc64le-unknown - ;; + ;; ppc64le-* | powerpc64little-*) basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'` ;; @@ -784,10 +842,26 @@ rtpc | rtpc-*) basic_machine=romp-ibm ;; + s390 | s390-*) + basic_machine=s390-ibm + ;; + s390x | s390x-*) + basic_machine=s390x-ibm + ;; sa29200) basic_machine=a29k-amd os=-udi ;; + sb1) + basic_machine=mipsisa64sb1-unknown + ;; + sb1el) + basic_machine=mipsisa64sb1el-unknown + ;; + sei) + basic_machine=mips-sei + os=-seiux + ;; sequent) basic_machine=i386-sequent ;; @@ -795,7 +869,10 @@ basic_machine=sh-hitachi os=-hms ;; - sparclite-wrs) + sh64) + basic_machine=sh64-unknown + ;; + sparclite-wrs | simso-wrs) basic_machine=sparclite-wrs os=-vxworks ;; @@ -862,22 +939,42 @@ os=-dynix ;; t3e) - basic_machine=t3e-cray + basic_machine=alphaev5-cray + os=-unicos + ;; + t90) + basic_machine=t90-cray os=-unicos ;; tic54x | c54x*) basic_machine=tic54x-unknown os=-coff ;; + tic55x | c55x*) + basic_machine=tic55x-unknown + os=-coff + ;; + tic6x | c6x*) + basic_machine=tic6x-unknown + os=-coff + ;; tx39) basic_machine=mipstx39-unknown ;; tx39el) basic_machine=mipstx39el-unknown ;; + toad1) + basic_machine=pdp10-xkl + os=-tops20 + ;; tower | tower-32) basic_machine=m68k-ncr ;; + tpf) + basic_machine=s390x-ibm + os=-tpf + ;; udi29k) basic_machine=a29k-amd os=-udi @@ -899,8 +996,8 @@ os=-vms ;; vpp*|vx|vx-*) - basic_machine=f301-fujitsu - ;; + basic_machine=f301-fujitsu + ;; vxworks960) basic_machine=i960-wrs os=-vxworks @@ -921,17 +1018,13 @@ basic_machine=hppa1.1-winbond os=-proelf ;; - windows32) - basic_machine=i386-pc - os=-windows32-msvcrt + xps | xps100) + basic_machine=xps100-honeywell ;; - xmp) - basic_machine=xmp-cray + ymp) + basic_machine=ymp-cray os=-unicos ;; - xps | xps100) - basic_machine=xps100-honeywell - ;; z8k-*-coff) basic_machine=z8k-unknown os=-sim @@ -952,13 +1045,6 @@ op60c) basic_machine=hppa1.1-oki ;; - mips) - if [ x$os = x-linux-gnu ]; then - basic_machine=mips-unknown - else - basic_machine=mips-mips - fi - ;; romp) basic_machine=romp-ibm ;; @@ -978,13 +1064,16 @@ we32k) basic_machine=we32k-att ;; - sh3 | sh4 | sh3eb | sh4eb) + sh3 | sh4 | sh[34]eb | sh[1234]le | sh[23]ele) basic_machine=sh-unknown ;; + sh64) + basic_machine=sh64-unknown + ;; sparc | sparcv9 | sparcv9b) basic_machine=sparc-sun ;; - cydra) + cydra) basic_machine=cydra-cydrome ;; orion) @@ -999,10 +1088,6 @@ pmac | pmac-mpw) basic_machine=powerpc-apple ;; - c4x*) - basic_machine=c4x-none - os=-coff - ;; *-unknown) # Make sure to match an already-canonicalized machine name. ;; @@ -1058,17 +1143,19 @@ | -aos* \ | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \ | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \ - | -hiux* | -386bsd* | -netbsd* | -openbsd* | -freebsd* | -riscix* \ + | -hiux* | -386bsd* | -knetbsd* | -netbsd* | -openbsd* | -kfreebsd* | -freebsd* | -riscix* \ | -lynxos* | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \ | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \ | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \ | -chorusos* | -chorusrdb* \ | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \ - | -mingw32* | -linux-gnu* | -uxpv* | -beos* | -mpeix* | -udk* \ - | -interix* | -uwin* | -rhapsody* | -darwin* | -opened* \ + | -mingw32* | -linux-gnu* | -linux-uclibc* | -uxpv* | -beos* | -mpeix* | -udk* \ + | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \ | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \ | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \ - | -os2* | -vos*) + | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \ + | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \ + | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly*) # Remember, each alternative MUST END IN *, to match a version number. ;; -qnx*) @@ -1080,8 +1167,10 @@ ;; esac ;; + -nto-qnx*) + ;; -nto*) - os=-nto-qnx + os=`echo $os | sed -e 's|nto|nto-qnx|'` ;; -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \ | -windows* | -osx | -abug | -netware* | -os9* | -beos* \ @@ -1090,6 +1179,9 @@ -mac*) os=`echo $os | sed -e 's|mac|macos|'` ;; + -linux-dietlibc) + os=-linux-dietlibc + ;; -linux*) os=`echo $os | sed -e 's|linux|linux-gnu|'` ;; @@ -1102,6 +1194,9 @@ -opened*) os=-openedition ;; + -os400*) + os=-os400 + ;; -wince*) os=-wince ;; @@ -1120,14 +1215,23 @@ -acis*) os=-aos ;; + -atheos*) + os=-atheos + ;; + -syllable*) + os=-syllable + ;; -386bsd) os=-bsd ;; -ctix* | -uts*) os=-sysv ;; + -nova*) + os=-rtmk-nova + ;; -ns2 ) - os=-nextstep2 + os=-nextstep2 ;; -nsk*) os=-nsk @@ -1139,6 +1243,9 @@ -sinix*) os=-sysv4 ;; + -tpf*) + os=-tpf + ;; -triton*) os=-sysv3 ;; @@ -1166,8 +1273,14 @@ -xenix) os=-xenix ;; - -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) - os=-mint + -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) + os=-mint + ;; + -aros*) + os=-aros + ;; + -kaos*) + os=-kaos ;; -none) ;; @@ -1200,10 +1313,14 @@ arm*-semi) os=-aout ;; + c4x-* | tic4x-*) + os=-coff + ;; + # This must come before the *-dec entry. pdp10-*) os=-tops20 ;; - pdp11-*) + pdp11-*) os=-none ;; *-dec | vax-*) @@ -1230,6 +1347,9 @@ mips*-*) os=-elf ;; + or32-*) + os=-coff + ;; *-tti) # must be before sparc entry or we get the wrong os. os=-sysv3 ;; @@ -1293,19 +1413,19 @@ *-next) os=-nextstep3 ;; - *-gould) + *-gould) os=-sysv ;; - *-highlevel) + *-highlevel) os=-bsd ;; *-encore) os=-bsd ;; - *-sgi) + *-sgi) os=-irix ;; - *-siemens) + *-siemens) os=-sysv4 ;; *-masscomp) @@ -1374,10 +1494,16 @@ -mvs* | -opened*) vendor=ibm ;; + -os400*) + vendor=ibm + ;; -ptx*) vendor=sequent ;; - -vxsim* | -vxworks*) + -tpf*) + vendor=ibm + ;; + -vxsim* | -vxworks* | -windiss*) vendor=wrs ;; -aux*) --- tse3-0.2.7.orig/aclocal.m4 +++ tse3-0.2.7/aclocal.m4 @@ -1,115 +1,869 @@ -# aclocal.m4 generated automatically by aclocal 1.6.3 -*- Autoconf -*- +dnl aclocal.m4 generated automatically by aclocal 1.4-p6 -# Copyright 1996, 1997, 1998, 1999, 2000, 2001, 2002 -# Free Software Foundation, Inc. -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. +dnl Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc. +dnl This file is free software; the Free Software Foundation +dnl gives unlimited permission to copy and/or distribute it, +dnl with or without modifications, as long as this notice is preserved. + +dnl This program is distributed in the hope that it will be useful, +dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without +dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A +dnl PARTICULAR PURPOSE. + +# lib-prefix.m4 serial 3 (gettext-0.13) +dnl Copyright (C) 2001-2003 Free Software Foundation, Inc. +dnl This file is free software, distributed under the terms of the GNU +dnl General Public License. As a special exception to the GNU General +dnl Public License, this file may be distributed as part of a program +dnl that contains a configuration script generated by Autoconf, under +dnl the same distribution terms as the rest of that program. + +dnl From Bruno Haible. + +dnl AC_LIB_ARG_WITH is synonymous to AC_ARG_WITH in autoconf-2.13, and +dnl similar to AC_ARG_WITH in autoconf 2.52...2.57 except that is doesn't +dnl require excessive bracketing. +ifdef([AC_HELP_STRING], +[AC_DEFUN([AC_LIB_ARG_WITH], [AC_ARG_WITH([$1],[[$2]],[$3],[$4])])], +[AC_DEFUN([AC_][LIB_ARG_WITH], [AC_ARG_WITH([$1],[$2],[$3],[$4])])]) + +dnl AC_LIB_PREFIX adds to the CPPFLAGS and LDFLAGS the flags that are needed +dnl to access previously installed libraries. The basic assumption is that +dnl a user will want packages to use other packages he previously installed +dnl with the same --prefix option. +dnl This macro is not needed if only AC_LIB_LINKFLAGS is used to locate +dnl libraries, but is otherwise very convenient. +AC_DEFUN([AC_LIB_PREFIX], +[ + AC_BEFORE([$0], [AC_LIB_LINKFLAGS]) + AC_REQUIRE([AC_PROG_CC]) + AC_REQUIRE([AC_CANONICAL_HOST]) + AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) + dnl By default, look in $includedir and $libdir. + use_additional=yes + AC_LIB_WITH_FINAL_PREFIX([ + eval additional_includedir=\"$includedir\" + eval additional_libdir=\"$libdir\" + ]) + AC_LIB_ARG_WITH([lib-prefix], +[ --with-lib-prefix[=DIR] search for libraries in DIR/include and DIR/lib + --without-lib-prefix don't search for libraries in includedir and libdir], +[ + if test "X$withval" = "Xno"; then + use_additional=no + else + if test "X$withval" = "X"; then + AC_LIB_WITH_FINAL_PREFIX([ + eval additional_includedir=\"$includedir\" + eval additional_libdir=\"$libdir\" + ]) + else + additional_includedir="$withval/include" + additional_libdir="$withval/lib" + fi + fi +]) + if test $use_additional = yes; then + dnl Potentially add $additional_includedir to $CPPFLAGS. + dnl But don't add it + dnl 1. if it's the standard /usr/include, + dnl 2. if it's already present in $CPPFLAGS, + dnl 3. if it's /usr/local/include and we are using GCC on Linux, + dnl 4. if it doesn't exist as a directory. + if test "X$additional_includedir" != "X/usr/include"; then + haveit= + for x in $CPPFLAGS; do + AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) + if test "X$x" = "X-I$additional_includedir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + if test "X$additional_includedir" = "X/usr/local/include"; then + if test -n "$GCC"; then + case $host_os in + linux*) haveit=yes;; + esac + fi + fi + if test -z "$haveit"; then + if test -d "$additional_includedir"; then + dnl Really add $additional_includedir to $CPPFLAGS. + CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }-I$additional_includedir" + fi + fi + fi + fi + dnl Potentially add $additional_libdir to $LDFLAGS. + dnl But don't add it + dnl 1. if it's the standard /usr/lib, + dnl 2. if it's already present in $LDFLAGS, + dnl 3. if it's /usr/local/lib and we are using GCC on Linux, + dnl 4. if it doesn't exist as a directory. + if test "X$additional_libdir" != "X/usr/lib"; then + haveit= + for x in $LDFLAGS; do + AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) + if test "X$x" = "X-L$additional_libdir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + if test "X$additional_libdir" = "X/usr/local/lib"; then + if test -n "$GCC"; then + case $host_os in + linux*) haveit=yes;; + esac + fi + fi + if test -z "$haveit"; then + if test -d "$additional_libdir"; then + dnl Really add $additional_libdir to $LDFLAGS. + LDFLAGS="${LDFLAGS}${LDFLAGS:+ }-L$additional_libdir" + fi + fi + fi + fi + fi +]) -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. +dnl AC_LIB_PREPARE_PREFIX creates variables acl_final_prefix, +dnl acl_final_exec_prefix, containing the values to which $prefix and +dnl $exec_prefix will expand at the end of the configure script. +AC_DEFUN([AC_LIB_PREPARE_PREFIX], +[ + dnl Unfortunately, prefix and exec_prefix get only finally determined + dnl at the end of configure. + if test "X$prefix" = "XNONE"; then + acl_final_prefix="$ac_default_prefix" + else + acl_final_prefix="$prefix" + fi + if test "X$exec_prefix" = "XNONE"; then + acl_final_exec_prefix='${prefix}' + else + acl_final_exec_prefix="$exec_prefix" + fi + acl_save_prefix="$prefix" + prefix="$acl_final_prefix" + eval acl_final_exec_prefix=\"$acl_final_exec_prefix\" + prefix="$acl_save_prefix" +]) -# Do all the work for Automake. -*- Autoconf -*- +dnl AC_LIB_WITH_FINAL_PREFIX([statement]) evaluates statement, with the +dnl variables prefix and exec_prefix bound to the values they will have +dnl at the end of the configure script. +AC_DEFUN([AC_LIB_WITH_FINAL_PREFIX], +[ + acl_save_prefix="$prefix" + prefix="$acl_final_prefix" + acl_save_exec_prefix="$exec_prefix" + exec_prefix="$acl_final_exec_prefix" + $1 + exec_prefix="$acl_save_exec_prefix" + prefix="$acl_save_prefix" +]) -# This macro actually does too much some checks are only needed if -# your package does certain things. But this isn't really a big deal. +# lib-link.m4 serial 4 (gettext-0.12) +dnl Copyright (C) 2001-2003 Free Software Foundation, Inc. +dnl This file is free software, distributed under the terms of the GNU +dnl General Public License. As a special exception to the GNU General +dnl Public License, this file may be distributed as part of a program +dnl that contains a configuration script generated by Autoconf, under +dnl the same distribution terms as the rest of that program. + +dnl From Bruno Haible. + +dnl AC_LIB_LINKFLAGS(name [, dependencies]) searches for libname and +dnl the libraries corresponding to explicit and implicit dependencies. +dnl Sets and AC_SUBSTs the LIB${NAME} and LTLIB${NAME} variables and +dnl augments the CPPFLAGS variable. +AC_DEFUN([AC_LIB_LINKFLAGS], +[ + AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) + AC_REQUIRE([AC_LIB_RPATH]) + define([Name],[translit([$1],[./-], [___])]) + define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-], + [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])]) + AC_CACHE_CHECK([how to link with lib[]$1], [ac_cv_lib[]Name[]_libs], [ + AC_LIB_LINKFLAGS_BODY([$1], [$2]) + ac_cv_lib[]Name[]_libs="$LIB[]NAME" + ac_cv_lib[]Name[]_ltlibs="$LTLIB[]NAME" + ac_cv_lib[]Name[]_cppflags="$INC[]NAME" + ]) + LIB[]NAME="$ac_cv_lib[]Name[]_libs" + LTLIB[]NAME="$ac_cv_lib[]Name[]_ltlibs" + INC[]NAME="$ac_cv_lib[]Name[]_cppflags" + AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME) + AC_SUBST([LIB]NAME) + AC_SUBST([LTLIB]NAME) + dnl Also set HAVE_LIB[]NAME so that AC_LIB_HAVE_LINKFLAGS can reuse the + dnl results of this search when this library appears as a dependency. + HAVE_LIB[]NAME=yes + undefine([Name]) + undefine([NAME]) +]) -# Copyright 1996, 1997, 1998, 1999, 2000, 2001, 2002 -# Free Software Foundation, Inc. +dnl AC_LIB_HAVE_LINKFLAGS(name, dependencies, includes, testcode) +dnl searches for libname and the libraries corresponding to explicit and +dnl implicit dependencies, together with the specified include files and +dnl the ability to compile and link the specified testcode. If found, it +dnl sets and AC_SUBSTs HAVE_LIB${NAME}=yes and the LIB${NAME} and +dnl LTLIB${NAME} variables and augments the CPPFLAGS variable, and +dnl #defines HAVE_LIB${NAME} to 1. Otherwise, it sets and AC_SUBSTs +dnl HAVE_LIB${NAME}=no and LIB${NAME} and LTLIB${NAME} to empty. +AC_DEFUN([AC_LIB_HAVE_LINKFLAGS], +[ + AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) + AC_REQUIRE([AC_LIB_RPATH]) + define([Name],[translit([$1],[./-], [___])]) + define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-], + [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])]) + + dnl Search for lib[]Name and define LIB[]NAME, LTLIB[]NAME and INC[]NAME + dnl accordingly. + AC_LIB_LINKFLAGS_BODY([$1], [$2]) + + dnl Add $INC[]NAME to CPPFLAGS before performing the following checks, + dnl because if the user has installed lib[]Name and not disabled its use + dnl via --without-lib[]Name-prefix, he wants to use it. + ac_save_CPPFLAGS="$CPPFLAGS" + AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME) + + AC_CACHE_CHECK([for lib[]$1], [ac_cv_lib[]Name], [ + ac_save_LIBS="$LIBS" + LIBS="$LIBS $LIB[]NAME" + AC_TRY_LINK([$3], [$4], [ac_cv_lib[]Name=yes], [ac_cv_lib[]Name=no]) + LIBS="$ac_save_LIBS" + ]) + if test "$ac_cv_lib[]Name" = yes; then + HAVE_LIB[]NAME=yes + AC_DEFINE([HAVE_LIB]NAME, 1, [Define if you have the $1 library.]) + AC_MSG_CHECKING([how to link with lib[]$1]) + AC_MSG_RESULT([$LIB[]NAME]) + else + HAVE_LIB[]NAME=no + dnl If $LIB[]NAME didn't lead to a usable library, we don't need + dnl $INC[]NAME either. + CPPFLAGS="$ac_save_CPPFLAGS" + LIB[]NAME= + LTLIB[]NAME= + fi + AC_SUBST([HAVE_LIB]NAME) + AC_SUBST([LIB]NAME) + AC_SUBST([LTLIB]NAME) + undefine([Name]) + undefine([NAME]) +]) -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. +dnl Determine the platform dependent parameters needed to use rpath: +dnl libext, shlibext, hardcode_libdir_flag_spec, hardcode_libdir_separator, +dnl hardcode_direct, hardcode_minus_L. +AC_DEFUN([AC_LIB_RPATH], +[ + AC_REQUIRE([AC_PROG_CC]) dnl we use $CC, $GCC, $LDFLAGS + AC_REQUIRE([AC_LIB_PROG_LD]) dnl we use $LD, $with_gnu_ld + AC_REQUIRE([AC_CANONICAL_HOST]) dnl we use $host + AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT]) dnl we use $ac_aux_dir + AC_CACHE_CHECK([for shared library run path origin], acl_cv_rpath, [ + CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \ + ${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh + . ./conftest.sh + rm -f ./conftest.sh + acl_cv_rpath=done + ]) + wl="$acl_cv_wl" + libext="$acl_cv_libext" + shlibext="$acl_cv_shlibext" + hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec" + hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator" + hardcode_direct="$acl_cv_hardcode_direct" + hardcode_minus_L="$acl_cv_hardcode_minus_L" + dnl Determine whether the user wants rpath handling at all. + AC_ARG_ENABLE(rpath, + [ --disable-rpath do not hardcode runtime library paths], + :, enable_rpath=yes) +]) -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. +dnl AC_LIB_LINKFLAGS_BODY(name [, dependencies]) searches for libname and +dnl the libraries corresponding to explicit and implicit dependencies. +dnl Sets the LIB${NAME}, LTLIB${NAME} and INC${NAME} variables. +AC_DEFUN([AC_LIB_LINKFLAGS_BODY], +[ + define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-], + [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])]) + dnl By default, look in $includedir and $libdir. + use_additional=yes + AC_LIB_WITH_FINAL_PREFIX([ + eval additional_includedir=\"$includedir\" + eval additional_libdir=\"$libdir\" + ]) + AC_LIB_ARG_WITH([lib$1-prefix], +[ --with-lib$1-prefix[=DIR] search for lib$1 in DIR/include and DIR/lib + --without-lib$1-prefix don't search for lib$1 in includedir and libdir], +[ + if test "X$withval" = "Xno"; then + use_additional=no + else + if test "X$withval" = "X"; then + AC_LIB_WITH_FINAL_PREFIX([ + eval additional_includedir=\"$includedir\" + eval additional_libdir=\"$libdir\" + ]) + else + additional_includedir="$withval/include" + additional_libdir="$withval/lib" + fi + fi +]) + dnl Search the library and its dependencies in $additional_libdir and + dnl $LDFLAGS. Using breadth-first-seach. + LIB[]NAME= + LTLIB[]NAME= + INC[]NAME= + rpathdirs= + ltrpathdirs= + names_already_handled= + names_next_round='$1 $2' + while test -n "$names_next_round"; do + names_this_round="$names_next_round" + names_next_round= + for name in $names_this_round; do + already_handled= + for n in $names_already_handled; do + if test "$n" = "$name"; then + already_handled=yes + break + fi + done + if test -z "$already_handled"; then + names_already_handled="$names_already_handled $name" + dnl See if it was already located by an earlier AC_LIB_LINKFLAGS + dnl or AC_LIB_HAVE_LINKFLAGS call. + uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./-|ABCDEFGHIJKLMNOPQRSTUVWXYZ___|'` + eval value=\"\$HAVE_LIB$uppername\" + if test -n "$value"; then + if test "$value" = yes; then + eval value=\"\$LIB$uppername\" + test -z "$value" || LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$value" + eval value=\"\$LTLIB$uppername\" + test -z "$value" || LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$value" + else + dnl An earlier call to AC_LIB_HAVE_LINKFLAGS has determined + dnl that this library doesn't exist. So just drop it. + : + fi + else + dnl Search the library lib$name in $additional_libdir and $LDFLAGS + dnl and the already constructed $LIBNAME/$LTLIBNAME. + found_dir= + found_la= + found_so= + found_a= + if test $use_additional = yes; then + if test -n "$shlibext" && test -f "$additional_libdir/lib$name.$shlibext"; then + found_dir="$additional_libdir" + found_so="$additional_libdir/lib$name.$shlibext" + if test -f "$additional_libdir/lib$name.la"; then + found_la="$additional_libdir/lib$name.la" + fi + else + if test -f "$additional_libdir/lib$name.$libext"; then + found_dir="$additional_libdir" + found_a="$additional_libdir/lib$name.$libext" + if test -f "$additional_libdir/lib$name.la"; then + found_la="$additional_libdir/lib$name.la" + fi + fi + fi + fi + if test "X$found_dir" = "X"; then + for x in $LDFLAGS $LTLIB[]NAME; do + AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) + case "$x" in + -L*) + dir=`echo "X$x" | sed -e 's/^X-L//'` + if test -n "$shlibext" && test -f "$dir/lib$name.$shlibext"; then + found_dir="$dir" + found_so="$dir/lib$name.$shlibext" + if test -f "$dir/lib$name.la"; then + found_la="$dir/lib$name.la" + fi + else + if test -f "$dir/lib$name.$libext"; then + found_dir="$dir" + found_a="$dir/lib$name.$libext" + if test -f "$dir/lib$name.la"; then + found_la="$dir/lib$name.la" + fi + fi + fi + ;; + esac + if test "X$found_dir" != "X"; then + break + fi + done + fi + if test "X$found_dir" != "X"; then + dnl Found the library. + LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$found_dir -l$name" + if test "X$found_so" != "X"; then + dnl Linking with a shared library. We attempt to hardcode its + dnl directory into the executable's runpath, unless it's the + dnl standard /usr/lib. + if test "$enable_rpath" = no || test "X$found_dir" = "X/usr/lib"; then + dnl No hardcoding is needed. + LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" + else + dnl Use an explicit option to hardcode DIR into the resulting + dnl binary. + dnl Potentially add DIR to ltrpathdirs. + dnl The ltrpathdirs will be appended to $LTLIBNAME at the end. + haveit= + for x in $ltrpathdirs; do + if test "X$x" = "X$found_dir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + ltrpathdirs="$ltrpathdirs $found_dir" + fi + dnl The hardcoding into $LIBNAME is system dependent. + if test "$hardcode_direct" = yes; then + dnl Using DIR/libNAME.so during linking hardcodes DIR into the + dnl resulting binary. + LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" + else + if test -n "$hardcode_libdir_flag_spec" && test "$hardcode_minus_L" = no; then + dnl Use an explicit option to hardcode DIR into the resulting + dnl binary. + LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" + dnl Potentially add DIR to rpathdirs. + dnl The rpathdirs will be appended to $LIBNAME at the end. + haveit= + for x in $rpathdirs; do + if test "X$x" = "X$found_dir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + rpathdirs="$rpathdirs $found_dir" + fi + else + dnl Rely on "-L$found_dir". + dnl But don't add it if it's already contained in the LDFLAGS + dnl or the already constructed $LIBNAME + haveit= + for x in $LDFLAGS $LIB[]NAME; do + AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) + if test "X$x" = "X-L$found_dir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir" + fi + if test "$hardcode_minus_L" != no; then + dnl FIXME: Not sure whether we should use + dnl "-L$found_dir -l$name" or "-L$found_dir $found_so" + dnl here. + LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" + else + dnl We cannot use $hardcode_runpath_var and LD_RUN_PATH + dnl here, because this doesn't fit in flags passed to the + dnl compiler. So give up. No hardcoding. This affects only + dnl very old systems. + dnl FIXME: Not sure whether we should use + dnl "-L$found_dir -l$name" or "-L$found_dir $found_so" + dnl here. + LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name" + fi + fi + fi + fi + else + if test "X$found_a" != "X"; then + dnl Linking with a static library. + LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_a" + else + dnl We shouldn't come here, but anyway it's good to have a + dnl fallback. + LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir -l$name" + fi + fi + dnl Assume the include files are nearby. + additional_includedir= + case "$found_dir" in + */lib | */lib/) + basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e 's,/lib/*$,,'` + additional_includedir="$basedir/include" + ;; + esac + if test "X$additional_includedir" != "X"; then + dnl Potentially add $additional_includedir to $INCNAME. + dnl But don't add it + dnl 1. if it's the standard /usr/include, + dnl 2. if it's /usr/local/include and we are using GCC on Linux, + dnl 3. if it's already present in $CPPFLAGS or the already + dnl constructed $INCNAME, + dnl 4. if it doesn't exist as a directory. + if test "X$additional_includedir" != "X/usr/include"; then + haveit= + if test "X$additional_includedir" = "X/usr/local/include"; then + if test -n "$GCC"; then + case $host_os in + linux*) haveit=yes;; + esac + fi + fi + if test -z "$haveit"; then + for x in $CPPFLAGS $INC[]NAME; do + AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) + if test "X$x" = "X-I$additional_includedir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + if test -d "$additional_includedir"; then + dnl Really add $additional_includedir to $INCNAME. + INC[]NAME="${INC[]NAME}${INC[]NAME:+ }-I$additional_includedir" + fi + fi + fi + fi + fi + dnl Look for dependencies. + if test -n "$found_la"; then + dnl Read the .la file. It defines the variables + dnl dlname, library_names, old_library, dependency_libs, current, + dnl age, revision, installed, dlopen, dlpreopen, libdir. + save_libdir="$libdir" + case "$found_la" in + */* | *\\*) . "$found_la" ;; + *) . "./$found_la" ;; + esac + libdir="$save_libdir" + dnl We use only dependency_libs. + for dep in $dependency_libs; do + case "$dep" in + -L*) + additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'` + dnl Potentially add $additional_libdir to $LIBNAME and $LTLIBNAME. + dnl But don't add it + dnl 1. if it's the standard /usr/lib, + dnl 2. if it's /usr/local/lib and we are using GCC on Linux, + dnl 3. if it's already present in $LDFLAGS or the already + dnl constructed $LIBNAME, + dnl 4. if it doesn't exist as a directory. + if test "X$additional_libdir" != "X/usr/lib"; then + haveit= + if test "X$additional_libdir" = "X/usr/local/lib"; then + if test -n "$GCC"; then + case $host_os in + linux*) haveit=yes;; + esac + fi + fi + if test -z "$haveit"; then + haveit= + for x in $LDFLAGS $LIB[]NAME; do + AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) + if test "X$x" = "X-L$additional_libdir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + if test -d "$additional_libdir"; then + dnl Really add $additional_libdir to $LIBNAME. + LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$additional_libdir" + fi + fi + haveit= + for x in $LDFLAGS $LTLIB[]NAME; do + AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) + if test "X$x" = "X-L$additional_libdir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + if test -d "$additional_libdir"; then + dnl Really add $additional_libdir to $LTLIBNAME. + LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$additional_libdir" + fi + fi + fi + fi + ;; + -R*) + dir=`echo "X$dep" | sed -e 's/^X-R//'` + if test "$enable_rpath" != no; then + dnl Potentially add DIR to rpathdirs. + dnl The rpathdirs will be appended to $LIBNAME at the end. + haveit= + for x in $rpathdirs; do + if test "X$x" = "X$dir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + rpathdirs="$rpathdirs $dir" + fi + dnl Potentially add DIR to ltrpathdirs. + dnl The ltrpathdirs will be appended to $LTLIBNAME at the end. + haveit= + for x in $ltrpathdirs; do + if test "X$x" = "X$dir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + ltrpathdirs="$ltrpathdirs $dir" + fi + fi + ;; + -l*) + dnl Handle this in the next round. + names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'` + ;; + *.la) + dnl Handle this in the next round. Throw away the .la's + dnl directory; it is already contained in a preceding -L + dnl option. + names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'` + ;; + *) + dnl Most likely an immediate library name. + LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$dep" + LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$dep" + ;; + esac + done + fi + else + dnl Didn't find the library; assume it is in the system directories + dnl known to the linker and runtime loader. (All the system + dnl directories known to the linker should also be known to the + dnl runtime loader, otherwise the system is severely misconfigured.) + LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name" + LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-l$name" + fi + fi + fi + done + done + if test "X$rpathdirs" != "X"; then + if test -n "$hardcode_libdir_separator"; then + dnl Weird platform: only the last -rpath option counts, the user must + dnl pass all path elements in one option. We can arrange that for a + dnl single library, but not when more than one $LIBNAMEs are used. + alldirs= + for found_dir in $rpathdirs; do + alldirs="${alldirs}${alldirs:+$hardcode_libdir_separator}$found_dir" + done + dnl Note: hardcode_libdir_flag_spec uses $libdir and $wl. + acl_save_libdir="$libdir" + libdir="$alldirs" + eval flag=\"$hardcode_libdir_flag_spec\" + libdir="$acl_save_libdir" + LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag" + else + dnl The -rpath options are cumulative. + for found_dir in $rpathdirs; do + acl_save_libdir="$libdir" + libdir="$found_dir" + eval flag=\"$hardcode_libdir_flag_spec\" + libdir="$acl_save_libdir" + LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag" + done + fi + fi + if test "X$ltrpathdirs" != "X"; then + dnl When using libtool, the option that works for both libraries and + dnl executables is -R. The -R options are cumulative. + for found_dir in $ltrpathdirs; do + LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-R$found_dir" + done + fi +]) -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA -# 02111-1307, USA. +dnl AC_LIB_APPENDTOVAR(VAR, CONTENTS) appends the elements of CONTENTS to VAR, +dnl unless already present in VAR. +dnl Works only for CPPFLAGS, not for LIB* variables because that sometimes +dnl contains two or three consecutive elements that belong together. +AC_DEFUN([AC_LIB_APPENDTOVAR], +[ + for element in [$2]; do + haveit= + for x in $[$1]; do + AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) + if test "X$x" = "X$element"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + [$1]="${[$1]}${[$1]:+ }$element" + fi + done +]) + +# lib-ld.m4 serial 3 (gettext-0.13) +dnl Copyright (C) 1996-2003 Free Software Foundation, Inc. +dnl This file is free software, distributed under the terms of the GNU +dnl General Public License. As a special exception to the GNU General +dnl Public License, this file may be distributed as part of a program +dnl that contains a configuration script generated by Autoconf, under +dnl the same distribution terms as the rest of that program. + +dnl Subroutines of libtool.m4, +dnl with replacements s/AC_/AC_LIB/ and s/lt_cv/acl_cv/ to avoid collision +dnl with libtool.m4. + +dnl From libtool-1.4. Sets the variable with_gnu_ld to yes or no. +AC_DEFUN([AC_LIB_PROG_LD_GNU], +[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], acl_cv_prog_gnu_ld, +[# I'd rather use --version here, but apparently some GNU ld's only accept -v. +case `$LD -v 2>&1 conf$$.sh + echo "exit 0" >>conf$$.sh + chmod +x conf$$.sh + if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then + PATH_SEPARATOR=';' + else + PATH_SEPARATOR=: + fi + rm -f conf$$.sh +fi +ac_prog=ld +if test "$GCC" = yes; then + # Check if gcc -print-prog-name=ld gives a path. + AC_MSG_CHECKING([for ld used by GCC]) + case $host in + *-*-mingw*) + # gcc leaves a trailing carriage return which upsets mingw + ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; + *) + ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; + esac + case $ac_prog in + # Accept absolute paths. + [[\\/]* | [A-Za-z]:[\\/]*)] + [re_direlt='/[^/][^/]*/\.\./'] + # Canonicalize the path of ld + ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'` + while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do + ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"` + done + test -z "$LD" && LD="$ac_prog" + ;; + "") + # If it fails, then pretend we aren't using GCC. + ac_prog=ld + ;; + *) + # If it is relative, then search for the first ld in PATH. + with_gnu_ld=unknown + ;; + esac +elif test "$with_gnu_ld" = yes; then + AC_MSG_CHECKING([for GNU ld]) +else + AC_MSG_CHECKING([for non-GNU ld]) +fi +AC_CACHE_VAL(acl_cv_path_LD, +[if test -z "$LD"; then + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}" + for ac_dir in $PATH; do + test -z "$ac_dir" && ac_dir=. + if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then + acl_cv_path_LD="$ac_dir/$ac_prog" + # Check to see if the program is GNU ld. I'd rather use --version, + # but apparently some GNU ld's only accept -v. + # Break only if it was the GNU/non-GNU ld that we prefer. + case `"$acl_cv_path_LD" -v 2>&1 < /dev/null` in + *GNU* | *'with BFD'*) + test "$with_gnu_ld" != no && break ;; + *) + test "$with_gnu_ld" != yes && break ;; + esac + fi + done + IFS="$ac_save_ifs" +else + acl_cv_path_LD="$LD" # Let the user override the test with a path. +fi]) +LD="$acl_cv_path_LD" +if test -n "$LD"; then + AC_MSG_RESULT($LD) +else + AC_MSG_RESULT(no) +fi +test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH]) +AC_LIB_PROG_LD_GNU +]) + +# Do all the work for Automake. This macro actually does too much -- +# some checks are only needed if your package does certain things. +# But this isn't really a big deal. -# serial 8 +# serial 1 + +dnl Usage: +dnl AM_INIT_AUTOMAKE(package,version, [no-define]) -# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be -# written in clear, in which case automake, when reading aclocal.m4, -# will think it sees a *use*, and therefore will trigger all it's -# C support machinery. Also note that it means that autoscan, seeing -# CC etc. in the Makefile, will ask for an AC_PROG_CC use... - - -AC_PREREQ([2.52]) - -# Autoconf 2.50 wants to disallow AM_ names. We explicitly allow -# the ones we care about. -m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl - -# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) -# AM_INIT_AUTOMAKE([OPTIONS]) -# ----------------------------------------------- -# The call with PACKAGE and VERSION arguments is the old style -# call (pre autoconf-2.50), which is being phased out. PACKAGE -# and VERSION should now be passed to AC_INIT and removed from -# the call to AM_INIT_AUTOMAKE. -# We support both call styles for the transition. After -# the next Automake release, Autoconf can make the AC_INIT -# arguments mandatory, and then we can depend on a new Autoconf -# release and drop the old call support. AC_DEFUN([AM_INIT_AUTOMAKE], [AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl - AC_REQUIRE([AC_PROG_INSTALL])dnl -# test to see if srcdir already configured -if test "`cd $srcdir && pwd`" != "`pwd`" && - test -f $srcdir/config.status; then +AC_REQUIRE([AC_PROG_INSTALL]) +PACKAGE=[$1] +AC_SUBST(PACKAGE) +VERSION=[$2] +AC_SUBST(VERSION) +dnl test to see if srcdir already configured +if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) fi - -# Define the identity of the package. -dnl Distinguish between old-style and new-style calls. -m4_ifval([$2], -[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl - AC_SUBST([PACKAGE], [$1])dnl - AC_SUBST([VERSION], [$2])], -[_AM_SET_OPTIONS([$1])dnl - AC_SUBST([PACKAGE], [AC_PACKAGE_TARNAME])dnl - AC_SUBST([VERSION], [AC_PACKAGE_VERSION])])dnl - -_AM_IF_OPTION([no-define],, -[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) - AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl - -# Some tools Automake needs. -AC_REQUIRE([AM_SANITY_CHECK])dnl -AC_REQUIRE([AC_ARG_PROGRAM])dnl -AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version}) -AM_MISSING_PROG(AUTOCONF, autoconf) -AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}) -AM_MISSING_PROG(AUTOHEADER, autoheader) -AM_MISSING_PROG(MAKEINFO, makeinfo) -AM_MISSING_PROG(AMTAR, tar) -AM_PROG_INSTALL_SH -AM_PROG_INSTALL_STRIP -# We need awk for the "check" target. The system "awk" is bad on -# some platforms. -AC_REQUIRE([AC_PROG_AWK])dnl -AC_REQUIRE([AC_PROG_MAKE_SET])dnl - -_AM_IF_OPTION([no-dependencies],, -[AC_PROVIDE_IFELSE([AC_PROG_][CC], - [_AM_DEPENDENCIES(CC)], - [define([AC_PROG_][CC], - defn([AC_PROG_][CC])[_AM_DEPENDENCIES(CC)])])dnl -AC_PROVIDE_IFELSE([AC_PROG_][CXX], - [_AM_DEPENDENCIES(CXX)], - [define([AC_PROG_][CXX], - defn([AC_PROG_][CXX])[_AM_DEPENDENCIES(CXX)])])dnl -]) -]) +ifelse([$3],, +AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) +AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])) +AC_REQUIRE([AM_SANITY_CHECK]) +AC_REQUIRE([AC_ARG_PROGRAM]) +dnl FIXME This is truly gross. +missing_dir=`cd $ac_aux_dir && pwd` +AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version}, $missing_dir) +AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir) +AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}, $missing_dir) +AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir) +AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir) +AC_REQUIRE([AC_PROG_MAKE_SET])]) # Copyright 2002 Free Software Foundation, Inc. @@ -131,103 +885,37 @@ # ---------------------------- # Automake X.Y traces this macro to ensure aclocal.m4 has been # generated from the m4 files accompanying Automake X.Y. -AC_DEFUN([AM_AUTOMAKE_VERSION],[am__api_version="1.6"]) +AC_DEFUN([AM_AUTOMAKE_VERSION],[am__api_version="1.4"]) # AM_SET_CURRENT_AUTOMAKE_VERSION # ------------------------------- # Call AM_AUTOMAKE_VERSION so it can be traced. # This function is AC_REQUIREd by AC_INIT_AUTOMAKE. AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], - [AM_AUTOMAKE_VERSION([1.6.3])]) - -# Helper functions for option handling. -*- Autoconf -*- - -# Copyright 2001, 2002 Free Software Foundation, Inc. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA -# 02111-1307, USA. - -# serial 2 - -# _AM_MANGLE_OPTION(NAME) -# ----------------------- -AC_DEFUN([_AM_MANGLE_OPTION], -[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) - -# _AM_SET_OPTION(NAME) -# ------------------------------ -# Set option NAME. Presently that only means defining a flag for this option. -AC_DEFUN([_AM_SET_OPTION], -[m4_define(_AM_MANGLE_OPTION([$1]), 1)]) - -# _AM_SET_OPTIONS(OPTIONS) -# ---------------------------------- -# OPTIONS is a space-separated list of Automake options. -AC_DEFUN([_AM_SET_OPTIONS], -[AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) - -# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) -# ------------------------------------------- -# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. -AC_DEFUN([_AM_IF_OPTION], -[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) + [AM_AUTOMAKE_VERSION([1.4-p6])]) # # Check to make sure that the build environment is sane. # -# Copyright 1996, 1997, 2000, 2001 Free Software Foundation, Inc. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA -# 02111-1307, USA. - -# serial 3 - -# AM_SANITY_CHECK -# --------------- AC_DEFUN([AM_SANITY_CHECK], [AC_MSG_CHECKING([whether build environment is sane]) # Just in case sleep 1 -echo timestamp > conftest.file +echo timestamp > conftestfile # Do `set' in a subshell so we don't clobber the current shell's # arguments. Must try -L first in case configure is actually a # symlink; some systems play weird games with the mod time of symlinks # (eg FreeBSD returns the mod time of the symlink's containing # directory). if ( - set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` - if test "$[*]" = "X"; then + set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null` + if test "[$]*" = "X"; then # -L didn't work. - set X `ls -t $srcdir/configure conftest.file` + set X `ls -t $srcdir/configure conftestfile` fi - rm -f conftest.file - if test "$[*]" != "X $srcdir/configure conftest.file" \ - && test "$[*]" != "X conftest.file $srcdir/configure"; then + if test "[$]*" != "X $srcdir/configure conftestfile" \ + && test "[$]*" != "X conftestfile $srcdir/configure"; then # If neither matched, then we have a broken ls. This can happen # if, for instance, CONFIG_SHELL is bash and it inherits a @@ -237,7 +925,7 @@ alias in your environment]) fi - test "$[2]" = conftest.file + test "[$]2" = conftestfile ) then # Ok. @@ -246,657 +934,503 @@ AC_MSG_ERROR([newly created file is older than distributed files! Check your system clock]) fi +rm -f conftest* AC_MSG_RESULT(yes)]) -# -*- Autoconf -*- - - -# Copyright 1997, 1999, 2000, 2001 Free Software Foundation, Inc. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA -# 02111-1307, USA. - -# serial 3 - -# AM_MISSING_PROG(NAME, PROGRAM) -# ------------------------------ +dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY) +dnl The program must properly implement --version. AC_DEFUN([AM_MISSING_PROG], -[AC_REQUIRE([AM_MISSING_HAS_RUN]) -$1=${$1-"${am_missing_run}$2"} +[AC_MSG_CHECKING(for working $2) +# Run test in a subshell; some versions of sh will print an error if +# an executable is not found, even if stderr is redirected. +# Redirect stdin to placate older versions of autoconf. Sigh. +if ($2 --version) < /dev/null > /dev/null 2>&1; then + $1=$2 + AC_MSG_RESULT(found) +else + $1="$3/missing $2" + AC_MSG_RESULT(missing) +fi AC_SUBST($1)]) +# Like AC_CONFIG_HEADER, but automatically create stamp file. -# AM_MISSING_HAS_RUN -# ------------------ -# Define MISSING if not defined so far and test if it supports --run. -# If it does, set am_missing_run to use it, otherwise, to nothing. -AC_DEFUN([AM_MISSING_HAS_RUN], -[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl -test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" -# Use eval to expand $SHELL -if eval "$MISSING --run true"; then - am_missing_run="$MISSING --run " -else - am_missing_run= - AC_MSG_WARN([`missing' script is too old or missing]) -fi -]) +AC_DEFUN([AM_CONFIG_HEADER], +[AC_PREREQ([2.12]) +AC_CONFIG_HEADER([$1]) +dnl When config.status generates a header, we must update the stamp-h file. +dnl This file resides in the same directory as the config header +dnl that is generated. We must strip everything past the first ":", +dnl and everything past the last "/". +AC_OUTPUT_COMMANDS(changequote(<<,>>)dnl +ifelse(patsubst(<<$1>>, <<[^ ]>>, <<>>), <<>>, +<>CONFIG_HEADERS" || echo timestamp > patsubst(<<$1>>, <<^\([^:]*/\)?.*>>, <<\1>>)stamp-h<<>>dnl>>, +<>; do + case " <<$>>CONFIG_HEADERS " in + *" <<$>>am_file "*<<)>> + echo timestamp > `echo <<$>>am_file | sed -e 's%:.*%%' -e 's%[^/]*$%%'`stamp-h$am_indx + ;; + esac + am_indx=`expr "<<$>>am_indx" + 1` +done<<>>dnl>>) +changequote([,]))]) -# AM_AUX_DIR_EXPAND +# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*- -# Copyright 2001 Free Software Foundation, Inc. +# serial 47 AC_PROG_LIBTOOL +# Debian $Rev: 203 $ -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. +# AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED) +# ----------------------------------------------------------- +# If this macro is not defined by Autoconf, define it here. +m4_ifdef([AC_PROVIDE_IFELSE], + [], + [m4_define([AC_PROVIDE_IFELSE], + [m4_ifdef([AC_PROVIDE_$1], + [$2], [$3])])]) -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA -# 02111-1307, USA. -# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets -# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to -# `$srcdir', `$srcdir/..', or `$srcdir/../..'. -# -# Of course, Automake must honor this variable whenever it calls a -# tool from the auxiliary directory. The problem is that $srcdir (and -# therefore $ac_aux_dir as well) can be either absolute or relative, -# depending on how configure is run. This is pretty annoying, since -# it makes $ac_aux_dir quite unusable in subdirectories: in the top -# source directory, any form will work fine, but in subdirectories a -# relative path needs to be adjusted first. -# -# $ac_aux_dir/missing -# fails when called from a subdirectory if $ac_aux_dir is relative -# $top_srcdir/$ac_aux_dir/missing -# fails if $ac_aux_dir is absolute, -# fails when called from a subdirectory in a VPATH build with -# a relative $ac_aux_dir -# -# The reason of the latter failure is that $top_srcdir and $ac_aux_dir -# are both prefixed by $srcdir. In an in-source build this is usually -# harmless because $srcdir is `.', but things will broke when you -# start a VPATH build or use an absolute $srcdir. -# -# So we could use something similar to $top_srcdir/$ac_aux_dir/missing, -# iff we strip the leading $srcdir from $ac_aux_dir. That would be: -# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` -# and then we would define $MISSING as -# MISSING="\${SHELL} $am_aux_dir/missing" -# This will work as long as MISSING is not called from configure, because -# unfortunately $(top_srcdir) has no meaning in configure. -# However there are other variables, like CC, which are often used in -# configure, and could therefore not use this "fixed" $ac_aux_dir. -# -# Another solution, used here, is to always expand $ac_aux_dir to an -# absolute PATH. The drawback is that using absolute paths prevent a -# configured tree to be moved without reconfiguration. - -# Rely on autoconf to set up CDPATH properly. -AC_PREREQ([2.50]) - -AC_DEFUN([AM_AUX_DIR_EXPAND], [ -# expand $ac_aux_dir to an absolute path -am_aux_dir=`cd $ac_aux_dir && pwd` -]) +# AC_PROG_LIBTOOL +# --------------- +AC_DEFUN([AC_PROG_LIBTOOL], +[AC_REQUIRE([_AC_PROG_LIBTOOL])dnl +dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX +dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX. + AC_PROVIDE_IFELSE([AC_PROG_CXX], + [AC_LIBTOOL_CXX], + [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX + ])]) +dnl And a similar setup for Fortran 77 support + AC_PROVIDE_IFELSE([AC_PROG_F77], + [AC_LIBTOOL_F77], + [define([AC_PROG_F77], defn([AC_PROG_F77])[AC_LIBTOOL_F77 +])]) + +dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly. +dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run +dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both. + AC_PROVIDE_IFELSE([AC_PROG_GCJ], + [AC_LIBTOOL_GCJ], + [AC_PROVIDE_IFELSE([A][M_PROG_GCJ], + [AC_LIBTOOL_GCJ], + [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ], + [AC_LIBTOOL_GCJ], + [ifdef([AC_PROG_GCJ], + [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ])]) + ifdef([A][M_PROG_GCJ], + [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ])]) + ifdef([LT_AC_PROG_GCJ], + [define([LT_AC_PROG_GCJ], + defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])])]) +])])# AC_PROG_LIBTOOL + + +# _AC_PROG_LIBTOOL +# ---------------- +AC_DEFUN([_AC_PROG_LIBTOOL], +[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl +AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl +AC_BEFORE([$0],[AC_LIBTOOL_F77])dnl +AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl -# AM_PROG_INSTALL_SH -# ------------------ -# Define $install_sh. +# This can be used to rebuild libtool when needed +LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh" -# Copyright 2001 Free Software Foundation, Inc. +# Always use our own libtool. +LIBTOOL='$(SHELL) $(top_builddir)/libtool' +AC_SUBST(LIBTOOL)dnl -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. +# Prevent multiple expansion +define([AC_PROG_LIBTOOL], []) +])# _AC_PROG_LIBTOOL -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA -# 02111-1307, USA. +# AC_LIBTOOL_SETUP +# ---------------- +AC_DEFUN([AC_LIBTOOL_SETUP], +[AC_PREREQ(2.50)dnl +AC_REQUIRE([AC_ENABLE_SHARED])dnl +AC_REQUIRE([AC_ENABLE_STATIC])dnl +AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl +AC_REQUIRE([AC_CANONICAL_HOST])dnl +AC_REQUIRE([AC_CANONICAL_BUILD])dnl +AC_REQUIRE([AC_PROG_CC])dnl +AC_REQUIRE([AC_PROG_LD])dnl +AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl +AC_REQUIRE([AC_PROG_NM])dnl -AC_DEFUN([AM_PROG_INSTALL_SH], -[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl -install_sh=${install_sh-"$am_aux_dir/install-sh"} -AC_SUBST(install_sh)]) +AC_REQUIRE([AC_PROG_LN_S])dnl +AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl +# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers! +AC_REQUIRE([AC_OBJEXT])dnl +AC_REQUIRE([AC_EXEEXT])dnl +dnl -# AM_PROG_INSTALL_STRIP +AC_LIBTOOL_SYS_MAX_CMD_LEN +AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE +AC_LIBTOOL_OBJDIR -# Copyright 2001 Free Software Foundation, Inc. +AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl +_LT_AC_PROG_ECHO_BACKSLASH -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA -# 02111-1307, USA. - -# One issue with vendor `install' (even GNU) is that you can't -# specify the program used to strip binaries. This is especially -# annoying in cross-compiling environments, where the build's strip -# is unlikely to handle the host's binaries. -# Fortunately install-sh will honor a STRIPPROG variable, so we -# always use install-sh in `make install-strip', and initialize -# STRIPPROG with the value of the STRIP variable (set by the user). -AC_DEFUN([AM_PROG_INSTALL_STRIP], -[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl -# Installed binaries are usually stripped using `strip' when the user -# run `make install-strip'. However `strip' might not be the right -# tool to use in cross-compilation environments, therefore Automake -# will honor the `STRIP' environment variable to overrule this program. -dnl Don't test for $cross_compiling = yes, because it might be `maybe'. -if test "$cross_compiling" != no; then - AC_CHECK_TOOL([STRIP], [strip], :) -fi -INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s" -AC_SUBST([INSTALL_STRIP_PROGRAM])]) - -# serial 4 -*- Autoconf -*- - -# Copyright 1999, 2000, 2001 Free Software Foundation, Inc. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. +case $host_os in +aix3*) + # AIX sometimes has problems with the GCC collect2 program. For some + # reason, if we set the COLLECT_NAMES environment variable, the problems + # vanish in a puff of smoke. + if test "X${COLLECT_NAMES+set}" != Xset; then + COLLECT_NAMES= + export COLLECT_NAMES + fi + ;; +esac -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. +# Sed substitution that helps us do robust quoting. It backslashifies +# metacharacters that are still active within double-quoted strings. +Xsed='sed -e s/^X//' +[sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g'] -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA -# 02111-1307, USA. +# Same as above, but do not quote variable references. +[double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g'] +# Sed substitution to delay expansion of an escaped shell variable in a +# double_quote_subst'ed string. +delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' -# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be -# written in clear, in which case automake, when reading aclocal.m4, -# will think it sees a *use*, and therefore will trigger all it's -# C support machinery. Also note that it means that autoscan, seeing -# CC etc. in the Makefile, will ask for an AC_PROG_CC use... +# Sed substitution to avoid accidental globbing in evaled expressions +no_glob_subst='s/\*/\\\*/g' +# Constants: +rm="rm -f" +# Global variables: +default_ofile=libtool +can_build_shared=yes -# _AM_DEPENDENCIES(NAME) -# ---------------------- -# See how the compiler implements dependency checking. -# NAME is "CC", "CXX", "GCJ", or "OBJC". -# We try a few techniques and use that to set a single cache variable. -# -# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was -# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular -# dependency, and given that the user is not expected to run this macro, -# just rely on AC_PROG_CC. -AC_DEFUN([_AM_DEPENDENCIES], -[AC_REQUIRE([AM_SET_DEPDIR])dnl -AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl -AC_REQUIRE([AM_MAKE_INCLUDE])dnl -AC_REQUIRE([AM_DEP_TRACK])dnl - -ifelse([$1], CC, [depcc="$CC" am_compiler_list=], - [$1], CXX, [depcc="$CXX" am_compiler_list=], - [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'], - [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'], - [depcc="$$1" am_compiler_list=]) - -AC_CACHE_CHECK([dependency style of $depcc], - [am_cv_$1_dependencies_compiler_type], -[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then - # We make a subdir and do the tests there. Otherwise we can end up - # making bogus files that we don't know about and never remove. For - # instance it was reported that on HP-UX the gcc test will end up - # making a dummy file named `D' -- because `-MD' means `put the output - # in D'. - mkdir conftest.dir - # Copy depcomp to subdir because otherwise we won't find it if we're - # using a relative directory. - cp "$am_depcomp" conftest.dir - cd conftest.dir - - am_cv_$1_dependencies_compiler_type=none - if test "$am_compiler_list" = ""; then - am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` - fi - for depmode in $am_compiler_list; do - # We need to recreate these files for each test, as the compiler may - # overwrite some of them when testing with obscure command lines. - # This happens at least with the AIX C compiler. - echo '#include "conftest.h"' > conftest.c - echo 'int i;' > conftest.h - echo "${am__include} ${am__quote}conftest.Po${am__quote}" > confmf - - case $depmode in - nosideeffect) - # after this tag, mechanisms are not by side-effect, so they'll - # only be used when explicitly requested - if test "x$enable_dependency_tracking" = xyes; then - continue - else - break - fi - ;; - none) break ;; - esac - # We check with `-c' and `-o' for the sake of the "dashmstdout" - # mode. It turns out that the SunPro C++ compiler does not properly - # handle `-M -o', and we need to detect this. - if depmode=$depmode \ - source=conftest.c object=conftest.o \ - depfile=conftest.Po tmpdepfile=conftest.TPo \ - $SHELL ./depcomp $depcc -c conftest.c -o conftest.o >/dev/null 2>&1 && - grep conftest.h conftest.Po > /dev/null 2>&1 && - ${MAKE-make} -s -f confmf > /dev/null 2>&1; then - am_cv_$1_dependencies_compiler_type=$depmode - break - fi - done +# All known linkers require a `.a' archive for static linking (except M$VC, +# which needs '.lib'). +libext=a +ltmain="$ac_aux_dir/ltmain.sh" +ofile="$default_ofile" +with_gnu_ld="$lt_cv_prog_gnu_ld" - cd .. - rm -rf conftest.dir -else - am_cv_$1_dependencies_compiler_type=none -fi -]) -AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type]) -]) +AC_CHECK_TOOL(AR, ar, false) +AC_CHECK_TOOL(RANLIB, ranlib, :) +AC_CHECK_TOOL(STRIP, strip, :) +old_CC="$CC" +old_CFLAGS="$CFLAGS" -# AM_SET_DEPDIR -# ------------- -# Choose a directory name for dependency files. -# This macro is AC_REQUIREd in _AM_DEPENDENCIES -AC_DEFUN([AM_SET_DEPDIR], -[rm -f .deps 2>/dev/null -mkdir .deps 2>/dev/null -if test -d .deps; then - DEPDIR=.deps -else - # MS-DOS does not allow filenames that begin with a dot. - DEPDIR=_deps -fi -rmdir .deps 2>/dev/null -AC_SUBST([DEPDIR]) -]) +# Set sane defaults for various variables +test -z "$AR" && AR=ar +test -z "$AR_FLAGS" && AR_FLAGS=cru +test -z "$AS" && AS=as +test -z "$CC" && CC=cc +test -z "$LTCC" && LTCC=$CC +test -z "$DLLTOOL" && DLLTOOL=dlltool +test -z "$LD" && LD=ld +test -z "$LN_S" && LN_S="ln -s" +test -z "$MAGIC_CMD" && MAGIC_CMD=file +test -z "$NM" && NM=nm +test -z "$SED" && SED=sed +test -z "$OBJDUMP" && OBJDUMP=objdump +test -z "$RANLIB" && RANLIB=: +test -z "$STRIP" && STRIP=: +test -z "$ac_objext" && ac_objext=o +# Determine commands to create old-style static archives. +old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs' +old_postinstall_cmds='chmod 644 $oldlib' +old_postuninstall_cmds= -# AM_DEP_TRACK -# ------------ -AC_DEFUN([AM_DEP_TRACK], -[AC_ARG_ENABLE(dependency-tracking, -[ --disable-dependency-tracking Speeds up one-time builds - --enable-dependency-tracking Do not reject slow dependency extractors]) -if test "x$enable_dependency_tracking" != xno; then - am_depcomp="$ac_aux_dir/depcomp" - AMDEPBACKSLASH='\' +if test -n "$RANLIB"; then + case $host_os in + openbsd*) + old_postinstall_cmds="\$RANLIB -t \$oldlib~$old_postinstall_cmds" + ;; + *) + old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds" + ;; + esac + old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" fi -AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) -AC_SUBST([AMDEPBACKSLASH]) -]) - -# Generate code to set up dependency tracking. -*- Autoconf -*- - -# Copyright 1999, 2000, 2001, 2002 Free Software Foundation, Inc. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA -# 02111-1307, USA. - -#serial 2 -# _AM_OUTPUT_DEPENDENCY_COMMANDS -# ------------------------------ -AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], -[for mf in $CONFIG_FILES; do - # Strip MF so we end up with the name of the file. - mf=`echo "$mf" | sed -e 's/:.*$//'` - # Check whether this is an Automake generated Makefile or not. - # We used to match only the files named `Makefile.in', but - # some people rename them; so instead we look at the file content. - # Grep'ing the first line is not enough: some people post-process - # each Makefile.in and add a new line on top of each file to say so. - # So let's grep whole file. - if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then - dirpart=`AS_DIRNAME("$mf")` - else - continue +# Only perform the check for file, if the check method requires it +case $deplibs_check_method in +file_magic*) + if test "$file_magic_cmd" = '$MAGIC_CMD'; then + AC_PATH_MAGIC fi - grep '^DEP_FILES *= *[[^ @%:@]]' < "$mf" > /dev/null || continue - # Extract the definition of DEP_FILES from the Makefile without - # running `make'. - DEPDIR=`sed -n -e '/^DEPDIR = / s///p' < "$mf"` - test -z "$DEPDIR" && continue - # When using ansi2knr, U may be empty or an underscore; expand it - U=`sed -n -e '/^U = / s///p' < "$mf"` - test -d "$dirpart/$DEPDIR" || mkdir "$dirpart/$DEPDIR" - # We invoke sed twice because it is the simplest approach to - # changing $(DEPDIR) to its actual value in the expansion. - for file in `sed -n -e ' - /^DEP_FILES = .*\\\\$/ { - s/^DEP_FILES = // - :loop - s/\\\\$// - p - n - /\\\\$/ b loop - p - } - /^DEP_FILES = / s/^DEP_FILES = //p' < "$mf" | \ - sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do - # Make sure the directory exists. - test -f "$dirpart/$file" && continue - fdir=`AS_DIRNAME(["$file"])` - AS_MKDIR_P([$dirpart/$fdir]) - # echo "creating $dirpart/$file" - echo '# dummy' > "$dirpart/$file" - done -done -])# _AM_OUTPUT_DEPENDENCY_COMMANDS + ;; +esac +AC_PROVIDE_IFELSE([AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no) +AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL], +enable_win32_dll=yes, enable_win32_dll=no) -# AM_OUTPUT_DEPENDENCY_COMMANDS -# ----------------------------- -# This macro should only be invoked once -- use via AC_REQUIRE. -# -# This code is only required when automatic dependency tracking -# is enabled. FIXME. This creates each `.P' file that we will -# need in order to bootstrap the dependency handling code. -AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], -[AC_CONFIG_COMMANDS([depfiles], - [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS], - [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"]) -]) +AC_ARG_ENABLE([libtool-lock], + [AC_HELP_STRING([--disable-libtool-lock], + [avoid locking (might break parallel builds)])]) +test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes -# Copyright 2001 Free Software Foundation, Inc. -*- Autoconf -*- +AC_ARG_WITH([pic], + [AC_HELP_STRING([--with-pic], + [try to use only PIC/non-PIC objects @<:@default=use both@:>@])], + [pic_mode="$withval"], + [pic_mode=default]) +test -z "$pic_mode" && pic_mode=default -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. +# Use C for the default configuration in the libtool script +tagname= +AC_LIBTOOL_LANG_C_CONFIG +_LT_AC_TAGCONFIG +])# AC_LIBTOOL_SETUP -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA -# 02111-1307, USA. +# _LT_AC_SYS_COMPILER +# ------------------- +AC_DEFUN([_LT_AC_SYS_COMPILER], +[AC_REQUIRE([AC_PROG_CC])dnl -# serial 2 +# If no C compiler was specified, use CC. +LTCC=${LTCC-"$CC"} -# AM_MAKE_INCLUDE() -# ----------------- -# Check to see how make treats includes. -AC_DEFUN([AM_MAKE_INCLUDE], -[am_make=${MAKE-make} -cat > confinc << 'END' -doit: - @echo done -END -# If we don't find an include directive, just comment out the code. -AC_MSG_CHECKING([for style of include used by $am_make]) -am__include="#" -am__quote= -_am_result=none -# First try GNU make style include. -echo "include confinc" > confmf -# We grep out `Entering directory' and `Leaving directory' -# messages which can occur if `w' ends up in MAKEFLAGS. -# In particular we don't look at `^make:' because GNU make might -# be invoked under some other name (usually "gmake"), in which -# case it prints its new name instead of `make'. -if test "`$am_make -s -f confmf 2> /dev/null | fgrep -v 'ing directory'`" = "done"; then - am__include=include - am__quote= - _am_result=GNU -fi -# Now try BSD make style include. -if test "$am__include" = "#"; then - echo '.include "confinc"' > confmf - if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then - am__include=.include - am__quote="\"" - _am_result=BSD - fi -fi -AC_SUBST(am__include) -AC_SUBST(am__quote) -AC_MSG_RESULT($_am_result) -rm -f confinc confmf -]) +# Allow CC to be a program name with arguments. +compiler=$CC +])# _LT_AC_SYS_COMPILER -# AM_CONDITIONAL -*- Autoconf -*- -# Copyright 1997, 2000, 2001 Free Software Foundation, Inc. +# _LT_AC_SYS_LIBPATH_AIX +# ---------------------- +# Links a minimal program and checks the executable +# for the system default hardcoded library path. In most cases, +# this is /usr/lib:/lib, but when the MPI compilers are used +# the location of the communication and MPI libs are included too. +# If we don't find anything, use the default library path according +# to the aix ld manual. +AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX], +[AC_LINK_IFELSE(AC_LANG_PROGRAM,[ +aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } +}'` +# Check for a 64-bit object if we didn't find anything. +if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } +}'`; fi],[]) +if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi +])# _LT_AC_SYS_LIBPATH_AIX -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. +# _LT_AC_SHELL_INIT(ARG) +# ---------------------- +AC_DEFUN([_LT_AC_SHELL_INIT], +[ifdef([AC_DIVERSION_NOTICE], + [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)], + [AC_DIVERT_PUSH(NOTICE)]) +$1 +AC_DIVERT_POP +])# _LT_AC_SHELL_INIT -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA -# 02111-1307, USA. -# serial 5 +# _LT_AC_PROG_ECHO_BACKSLASH +# -------------------------- +# Add some code to the start of the generated configure script which +# will find an echo command which doesn't interpret backslashes. +AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH], +[_LT_AC_SHELL_INIT([ +# Check that we are running under the correct shell. +SHELL=${CONFIG_SHELL-/bin/sh} -AC_PREREQ(2.52) +case X$ECHO in +X*--fallback-echo) + # Remove one level of quotation (which was required for Make). + ECHO=`echo "$ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','` + ;; +esac -# AM_CONDITIONAL(NAME, SHELL-CONDITION) -# ------------------------------------- -# Define a conditional. -AC_DEFUN([AM_CONDITIONAL], -[ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], - [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl -AC_SUBST([$1_TRUE]) -AC_SUBST([$1_FALSE]) -if $2; then - $1_TRUE= - $1_FALSE='#' +echo=${ECHO-echo} +if test "X[$]1" = X--no-reexec; then + # Discard the --no-reexec flag, and continue. + shift +elif test "X[$]1" = X--fallback-echo; then + # Avoid inline document here, it may be left over + : +elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then + # Yippee, $echo works! + : else - $1_TRUE='#' - $1_FALSE= + # Restart under the correct shell. + exec $SHELL "[$]0" --no-reexec ${1+"[$]@"} fi -AC_CONFIG_COMMANDS_PRE( -[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then - AC_MSG_ERROR([conditional \"$1\" was never defined. -Usually this means the macro was only invoked conditionally.]) -fi])]) - -# Like AC_CONFIG_HEADER, but automatically create stamp file. -*- Autoconf -*- - -# Copyright 1996, 1997, 2000, 2001 Free Software Foundation, Inc. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA -# 02111-1307, USA. - -AC_PREREQ([2.52]) -# serial 6 +if test "X[$]1" = X--fallback-echo; then + # used as fallback echo + shift + cat </dev/null && + echo_test_string="`eval $cmd`" && + (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null + then + break + fi + done +fi +if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + : +else + # The Solaris, AIX, and Digital Unix default echo programs unquote + # backslashes. This makes it impossible to quote backslashes using + # echo "$something" | sed 's/\\/\\\\/g' + # + # So, first we look for a working echo in the user's PATH. -# _AM_STAMP(HEADER) -# ----------------- -# The name of the stamp file for HEADER. -AC_DEFUN([_AM_STAMP], -[m4_define([_AM_STAMP_Count], m4_incr(_AM_STAMP_Count))dnl -AS_ESCAPE(_AM_DIRNAME(patsubst([$1], - [:.*])))/stamp-h[]_AM_STAMP_Count]) - - -# _AM_CONFIG_HEADER(HEADER[:SOURCES], COMMANDS, INIT-COMMANDS) -# ------------------------------------------------------------ -# We used to try to get a real timestamp in stamp-h. But the fear is that -# that will cause unnecessary cvs conflicts. -AC_DEFUN([_AM_CONFIG_HEADER], -[# Add the stamp file to the list of files AC keeps track of, -# along with our hook. -AC_CONFIG_HEADERS([$1], - [# update the timestamp -echo 'timestamp for $1' >"_AM_STAMP([$1])" -$2], - [$3]) -])# _AM_CONFIG_HEADER - - -# AM_CONFIG_HEADER(HEADER[:SOURCES]..., COMMANDS, INIT-COMMANDS) -# -------------------------------------------------------------- -AC_DEFUN([AM_CONFIG_HEADER], -[AC_FOREACH([_AM_File], [$1], [_AM_CONFIG_HEADER(_AM_File, [$2], [$3])]) -])# AM_CONFIG_HEADER - -# libtool.m4 - Configure libtool for the host system. -*-Shell-script-*- - -# serial 46 AC_PROG_LIBTOOL - -AC_DEFUN([AC_PROG_LIBTOOL], -[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl - -# This can be used to rebuild libtool when needed -LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh" - -# Always use our own libtool. -LIBTOOL='$(SHELL) $(top_builddir)/libtool' -AC_SUBST(LIBTOOL)dnl + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for dir in $PATH /usr/ucb; do + IFS="$lt_save_ifs" + if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && + test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + echo="$dir/echo" + break + fi + done + IFS="$lt_save_ifs" -# Prevent multiple expansion -define([AC_PROG_LIBTOOL], []) -]) + if test "X$echo" = Xecho; then + # We didn't find a better echo, so look for alternatives. + if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + # This shell has a builtin print -r that does the trick. + echo='print -r' + elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) && + test "X$CONFIG_SHELL" != X/bin/ksh; then + # If we have ksh, try running configure again with it. + ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} + export ORIGINAL_CONFIG_SHELL + CONFIG_SHELL=/bin/ksh + export CONFIG_SHELL + exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"} + else + # Try using printf. + echo='printf %s\n' + if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + # Cool, printf works + : + elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && + test "X$echo_testing_string" = 'X\t' && + echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL + export CONFIG_SHELL + SHELL="$CONFIG_SHELL" + export SHELL + echo="$CONFIG_SHELL [$]0 --fallback-echo" + elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && + test "X$echo_testing_string" = 'X\t' && + echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + echo="$CONFIG_SHELL [$]0 --fallback-echo" + else + # maybe with a smaller string... + prev=: -AC_DEFUN([AC_LIBTOOL_SETUP], -[AC_PREREQ(2.13)dnl -AC_REQUIRE([AC_ENABLE_SHARED])dnl -AC_REQUIRE([AC_ENABLE_STATIC])dnl -AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl -AC_REQUIRE([AC_CANONICAL_HOST])dnl -AC_REQUIRE([AC_CANONICAL_BUILD])dnl -AC_REQUIRE([AC_PROG_CC])dnl -AC_REQUIRE([AC_PROG_LD])dnl -AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl -AC_REQUIRE([AC_PROG_NM])dnl -AC_REQUIRE([AC_PROG_LN_S])dnl -AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl -AC_REQUIRE([AC_OBJEXT])dnl -AC_REQUIRE([AC_EXEEXT])dnl -dnl + for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do + if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null + then + break + fi + prev="$cmd" + done -_LT_AC_PROG_ECHO_BACKSLASH -# Only perform the check for file, if the check method requires it -case $deplibs_check_method in -file_magic*) - if test "$file_magic_cmd" = '$MAGIC_CMD'; then - AC_PATH_MAGIC + if test "$prev" != 'sed 50q "[$]0"'; then + echo_test_string=`eval $prev` + export echo_test_string + exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"} + else + # Oops. We lost completely, so just stick with echo. + echo=echo + fi + fi + fi fi - ;; -esac +fi +fi -AC_CHECK_TOOL(RANLIB, ranlib, :) -AC_CHECK_TOOL(STRIP, strip, :) +# Copy echo and quote the copy suitably for passing to libtool from +# the Makefile, instead of quoting the original, which is used later. +ECHO=$echo +if test "X$ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then + ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo" +fi + +AC_SUBST(ECHO) +])])# _LT_AC_PROG_ECHO_BACKSLASH -ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no) -ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL], -enable_win32_dll=yes, enable_win32_dll=no) -AC_ARG_ENABLE(libtool-lock, - [ --disable-libtool-lock avoid locking (might break parallel builds)]) +# _LT_AC_LOCK +# ----------- +AC_DEFUN([_LT_AC_LOCK], +[AC_ARG_ENABLE([libtool-lock], + [AC_HELP_STRING([--disable-libtool-lock], + [avoid locking (might break parallel builds)])]) test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes # Some flags need to be propagated to the compiler or linker for good # libtool support. case $host in +ia64-*-hpux*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if AC_TRY_EVAL(ac_compile); then + case `/usr/bin/file conftest.$ac_objext` in + *ELF-32*) + HPUX_IA64_MODE="32" + ;; + *ELF-64*) + HPUX_IA64_MODE="64" + ;; + esac + fi + rm -rf conftest* + ;; *-*-irix6*) # Find out which ABI we are using. echo '[#]line __oline__ "configure"' > conftest.$ac_ext if AC_TRY_EVAL(ac_compile); then + if test "$lt_cv_prog_gnu_ld" = yes; then + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + LD="${LD-ld} -melf32bsmip" + ;; + *N32*) + LD="${LD-ld} -melf32bmipn32" + ;; + *64-bit*) + LD="${LD-ld} -melf64bmip" + ;; + esac + else case `/usr/bin/file conftest.$ac_objext` in *32-bit*) LD="${LD-ld} -32" @@ -908,6 +1442,49 @@ LD="${LD-ld} -64" ;; esac + fi + fi + rm -rf conftest* + ;; + +x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if AC_TRY_EVAL(ac_compile); then + case "`/usr/bin/file conftest.o`" in + *32-bit*) + case $host in + x86_64-*linux*) + LD="${LD-ld} -m elf_i386" + ;; + ppc64-*linux*|powerpc64-*linux*) + LD="${LD-ld} -m elf32ppclinux" + ;; + s390x-*linux*) + LD="${LD-ld} -m elf_s390" + ;; + sparc64-*linux*) + LD="${LD-ld} -m elf32_sparc" + ;; + esac + ;; + *64-bit*) + case $host in + x86_64-*linux*) + LD="${LD-ld} -m elf_x86_64" + ;; + ppc*-*linux*|powerpc*-*linux*) + LD="${LD-ld} -m elf64ppc" + ;; + s390*-*linux*) + LD="${LD-ld} -m elf64_s390" + ;; + sparc*-*linux*) + LD="${LD-ld} -m elf64_sparc" + ;; + esac + ;; + esac fi rm -rf conftest* ;; @@ -917,1324 +1494,2202 @@ SAVE_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS -belf" AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf, - [AC_LANG_SAVE - AC_LANG_C + [AC_LANG_PUSH(C) AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no]) - AC_LANG_RESTORE]) + AC_LANG_POP]) if test x"$lt_cv_cc_needs_belf" != x"yes"; then # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf CFLAGS="$SAVE_CFLAGS" fi ;; - -ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL], +AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL], [*-*-cygwin* | *-*-mingw* | *-*-pw32*) AC_CHECK_TOOL(DLLTOOL, dlltool, false) AC_CHECK_TOOL(AS, as, false) AC_CHECK_TOOL(OBJDUMP, objdump, false) - - # recent cygwin and mingw systems supply a stub DllMain which the user - # can override, but on older systems we have to supply one - AC_CACHE_CHECK([if libtool should supply DllMain function], lt_cv_need_dllmain, - [AC_TRY_LINK([], - [extern int __attribute__((__stdcall__)) DllMain(void*, int, void*); - DllMain (0, 0, 0);], - [lt_cv_need_dllmain=no],[lt_cv_need_dllmain=yes])]) - - case $host/$CC in - *-*-cygwin*/gcc*-mno-cygwin*|*-*-mingw*) - # old mingw systems require "-dll" to link a DLL, while more recent ones - # require "-mdll" - SAVE_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS -mdll" - AC_CACHE_CHECK([how to link DLLs], lt_cv_cc_dll_switch, - [AC_TRY_LINK([], [], [lt_cv_cc_dll_switch=-mdll],[lt_cv_cc_dll_switch=-dll])]) - CFLAGS="$SAVE_CFLAGS" ;; - *-*-cygwin* | *-*-pw32*) - # cygwin systems need to pass --dll to the linker, and not link - # crt.o which will require a WinMain@16 definition. - lt_cv_cc_dll_switch="-Wl,--dll -nostartfiles" ;; - esac ;; ]) esac -_LT_AC_LTCONFIG_HACK +need_locks="$enable_libtool_lock" + +])# _LT_AC_LOCK + +# AC_LIBTOOL_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, +# [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE]) +# ---------------------------------------------------------------- +# Check whether the given compiler option works +AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], +[AC_REQUIRE([LT_AC_PROG_SED]) +AC_CACHE_CHECK([$1], [$2], + [$2=no + ifelse([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4]) + printf "$lt_simple_compile_test_code" > conftest.$ac_ext + lt_compiler_flag="$3" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + # The option is referenced via a variable to avoid confusing sed. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ + -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&AS_MESSAGE_LOG_FD + echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + if test ! -s conftest.err; then + $2=yes + fi + fi + $rm conftest* ]) -# AC_LIBTOOL_HEADER_ASSERT -# ------------------------ -AC_DEFUN([AC_LIBTOOL_HEADER_ASSERT], -[AC_CACHE_CHECK([whether $CC supports assert without backlinking], - [lt_cv_func_assert_works], - [case $host in - *-*-solaris*) - if test "$GCC" = yes && test "$with_gnu_ld" != yes; then - case `$CC --version 2>/dev/null` in - [[12]].*) lt_cv_func_assert_works=no ;; - *) lt_cv_func_assert_works=yes ;; - esac - fi - ;; - esac]) +if test x"[$]$2" = xyes; then + ifelse([$5], , :, [$5]) +else + ifelse([$6], , :, [$6]) +fi +])# AC_LIBTOOL_COMPILER_OPTION + + +# AC_LIBTOOL_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, +# [ACTION-SUCCESS], [ACTION-FAILURE]) +# ------------------------------------------------------------ +# Check whether the given compiler option works +AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], +[AC_CACHE_CHECK([$1], [$2], + [$2=no + save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS $3" + printf "$lt_simple_link_test_code" > conftest.$ac_ext + if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s conftest.err; then + # Append any errors to the config.log. + cat conftest.err 1>&AS_MESSAGE_LOG_FD + else + $2=yes + fi + fi + $rm conftest* + LDFLAGS="$save_LDFLAGS" +]) + +if test x"[$]$2" = xyes; then + ifelse([$4], , :, [$4]) +else + ifelse([$5], , :, [$5]) +fi +])# AC_LIBTOOL_LINKER_OPTION + + +# AC_LIBTOOL_SYS_MAX_CMD_LEN +# -------------------------- +AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], +[# find the maximum length of command line arguments +AC_MSG_CHECKING([the maximum length of command line arguments]) +AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl + i=0 + teststring="ABCD" + + case $build_os in + msdosdjgpp*) + # On DJGPP, this test can blow up pretty badly due to problems in libc + # (any single argument exceeding 2000 bytes causes a buffer overrun + # during glob expansion). Even if it were fixed, the result of this + # check would be larger than it should be. + lt_cv_sys_max_cmd_len=12288; # 12K is about right + ;; + + gnu*) + # Under GNU Hurd, this test is not required because there is + # no limit to the length of command line arguments. + # Libtool will interpret -1 as no limit whatsoever + lt_cv_sys_max_cmd_len=-1; + ;; + + cygwin* | mingw*) + # On Win9x/ME, this test blows up -- it succeeds, but takes + # about 5 minutes as the teststring grows exponentially. + # Worse, since 9x/ME are not pre-emptively multitasking, + # you end up with a "frozen" computer, even though with patience + # the test eventually succeeds (with a max line length of 256k). + # Instead, let's just punt: use the minimum linelength reported by + # all of the supported platforms: 8192 (on NT/2K/XP). + lt_cv_sys_max_cmd_len=8192; + ;; -if test "x$lt_cv_func_assert_works" = xyes; then - AC_CHECK_HEADERS(assert.h) + amigaos*) + # On AmigaOS with pdksh, this test takes hours, literally. + # So we just punt and use a minimum line length of 8192. + lt_cv_sys_max_cmd_len=8192; + ;; + + *) + # If test is not a shell built-in, we'll probably end up computing a + # maximum length that is only half of the actual maximum length, but + # we can't tell. + while (test "X"`$CONFIG_SHELL [$]0 --fallback-echo "X$teststring" 2>/dev/null` \ + = "XX$teststring") >/dev/null 2>&1 && + new_result=`expr "X$teststring" : ".*" 2>&1` && + lt_cv_sys_max_cmd_len=$new_result && + test $i != 17 # 1/2 MB should be enough + do + i=`expr $i + 1` + teststring=$teststring$teststring + done + teststring= + # Add a significant safety factor because C++ compilers can tack on massive + # amounts of additional arguments before passing them to the linker. + # It appears as though 1/2 is a usable value. + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` + ;; + esac +]) +if test -n $lt_cv_sys_max_cmd_len ; then + AC_MSG_RESULT($lt_cv_sys_max_cmd_len) +else + AC_MSG_RESULT(none) fi -])# AC_LIBTOOL_HEADER_ASSERT +])# AC_LIBTOOL_SYS_MAX_CMD_LEN + # _LT_AC_CHECK_DLFCN # -------------------- AC_DEFUN([_LT_AC_CHECK_DLFCN], -[AC_CHECK_HEADERS(dlfcn.h) +[AC_CHECK_HEADERS(dlfcn.h)dnl ])# _LT_AC_CHECK_DLFCN -# AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE -# --------------------------------- -AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], -[AC_REQUIRE([AC_CANONICAL_HOST]) -AC_REQUIRE([AC_PROG_NM]) -AC_REQUIRE([AC_OBJEXT]) -# Check for command to grab the raw symbol name followed by C symbol from nm. -AC_MSG_CHECKING([command to parse $NM output]) -AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe], [dnl -# These are sane defaults that work on at least a few old systems. -# [They come from Ultrix. What could be older than Ultrix?!! ;)] +# _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE, +# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING) +# ------------------------------------------------------------------ +AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF], +[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl +if test "$cross_compiling" = yes; then : + [$4] +else + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 + lt_status=$lt_dlunknown + cat > conftest.$ac_ext < +#endif -# Regexp to match symbols that can be accessed directly from C. -sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)' +#include -# Transform the above into a raw symbol and a C symbol. -symxfrm='\1 \2\3 \3' +#ifdef RTLD_GLOBAL +# define LT_DLGLOBAL RTLD_GLOBAL +#else +# ifdef DL_GLOBAL +# define LT_DLGLOBAL DL_GLOBAL +# else +# define LT_DLGLOBAL 0 +# endif +#endif -# Transform an extracted symbol line into a proper C declaration -lt_cv_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'" +/* We may have to define LT_DLLAZY_OR_NOW in the command line if we + find out it does not work in some platform. */ +#ifndef LT_DLLAZY_OR_NOW +# ifdef RTLD_LAZY +# define LT_DLLAZY_OR_NOW RTLD_LAZY +# else +# ifdef DL_LAZY +# define LT_DLLAZY_OR_NOW DL_LAZY +# else +# ifdef RTLD_NOW +# define LT_DLLAZY_OR_NOW RTLD_NOW +# else +# ifdef DL_NOW +# define LT_DLLAZY_OR_NOW DL_NOW +# else +# define LT_DLLAZY_OR_NOW 0 +# endif +# endif +# endif +# endif +#endif -# Transform an extracted symbol line into symbol name and symbol address -lt_cv_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" +#ifdef __cplusplus +extern "C" void exit (int); +#endif -# Define system-specific variables. -case $host_os in -aix*) - symcode='[[BCDT]]' - ;; -cygwin* | mingw* | pw32*) - symcode='[[ABCDGISTW]]' - ;; -hpux*) # Its linker distinguishes data from code symbols - lt_cv_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" - lt_cv_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" - ;; -irix*) - symcode='[[BCDEGRST]]' - ;; -solaris* | sysv5*) - symcode='[[BDT]]' - ;; -sysv4) - symcode='[[DFNSTU]]' - ;; -esac +void fnord() { int i=42;} +int main () +{ + void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); + int status = $lt_dlunknown; -# Handle CRLF in mingw tool chain -opt_cr= -case $host_os in -mingw*) - opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp - ;; -esac + if (self) + { + if (dlsym (self,"fnord")) status = $lt_dlno_uscore; + else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; + /* dlclose (self); */ + } -# If we're using GNU nm, then use its standard symbol codes. -if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then - symcode='[[ABCDGISTW]]' + exit (status); +}] +EOF + if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then + (./conftest; exit; ) 2>/dev/null + lt_status=$? + case x$lt_status in + x$lt_dlno_uscore) $1 ;; + x$lt_dlneed_uscore) $2 ;; + x$lt_unknown|x*) $3 ;; + esac + else : + # compilation failed + $3 + fi fi +rm -fr conftest* +])# _LT_AC_TRY_DLOPEN_SELF -# Try without a prefix undercore, then with it. -for ac_symprfx in "" "_"; do - - # Write the raw and C identifiers. -lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'" - # Check to see that the pipe works correctly. - pipe_works=no - rm -f conftest* - cat > conftest.$ac_ext < $nlist) && test -s "$nlist"; then - # Try sorting and uniquifying the output. - if sort "$nlist" | uniq > "$nlist"T; then - mv -f "$nlist"T "$nlist" - else - rm -f "$nlist"T - fi + case $host_os in + beos*) + lt_cv_dlopen="load_add_on" + lt_cv_dlopen_libs= + lt_cv_dlopen_self=yes + ;; - # Make sure that we snagged all the symbols we need. - if egrep ' nm_test_var$' "$nlist" >/dev/null; then - if egrep ' nm_test_func$' "$nlist" >/dev/null; then - cat < conftest.$ac_ext -#ifdef __cplusplus -extern "C" { -#endif + mingw* | pw32*) + lt_cv_dlopen="LoadLibrary" + lt_cv_dlopen_libs= + ;; -EOF - # Now generate the symbol file. - eval "$lt_cv_global_symbol_to_cdecl"' < "$nlist" >> conftest.$ac_ext' + cygwin*) + lt_cv_dlopen="dlopen" + lt_cv_dlopen_libs= + ;; - cat <> conftest.$ac_ext -#if defined (__STDC__) && __STDC__ -# define lt_ptr void * -#else -# define lt_ptr char * -# define const -#endif + darwin*) + # if libdl is installed we need to link against it + AC_CHECK_LIB([dl], [dlopen], + [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[ + lt_cv_dlopen="dyld" + lt_cv_dlopen_libs= + lt_cv_dlopen_self=yes + ]) + ;; -/* The mapping between symbol names and symbols. */ -const struct { - const char *name; - lt_ptr address; -} -lt_preloaded_symbols[[]] = -{ -EOF - sed "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr) \&\2},/" < "$nlist" >> conftest.$ac_ext - cat <<\EOF >> conftest.$ac_ext - {0, (lt_ptr) 0} -}; + *) + AC_CHECK_FUNC([shl_load], + [lt_cv_dlopen="shl_load"], + [AC_CHECK_LIB([dld], [shl_load], + [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"], + [AC_CHECK_FUNC([dlopen], + [lt_cv_dlopen="dlopen"], + [AC_CHECK_LIB([dl], [dlopen], + [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"], + [AC_CHECK_LIB([svld], [dlopen], + [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"], + [AC_CHECK_LIB([dld], [dld_link], + [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"]) + ]) + ]) + ]) + ]) + ]) + ;; + esac -#ifdef __cplusplus -} -#endif -EOF - # Now try linking the two files. - mv conftest.$ac_objext conftstm.$ac_objext - save_LIBS="$LIBS" - save_CFLAGS="$CFLAGS" - LIBS="conftstm.$ac_objext" - CFLAGS="$CFLAGS$no_builtin_flag" - if AC_TRY_EVAL(ac_link) && test -s conftest; then - pipe_works=yes - fi - LIBS="$save_LIBS" - CFLAGS="$save_CFLAGS" - else - echo "cannot find nm_test_func in $nlist" >&AC_FD_CC - fi - else - echo "cannot find nm_test_var in $nlist" >&AC_FD_CC - fi - else - echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AC_FD_CC - fi + if test "x$lt_cv_dlopen" != xno; then + enable_dlopen=yes else - echo "$progname: failed program was:" >&AC_FD_CC - cat conftest.$ac_ext >&5 + enable_dlopen=no fi - rm -f conftest* conftst* - # Do not use the global_symbol_pipe unless it works. - if test "$pipe_works" = yes; then - break - else - lt_cv_sys_global_symbol_pipe= - fi -done -]) -global_symbol_pipe="$lt_cv_sys_global_symbol_pipe" -if test -z "$lt_cv_sys_global_symbol_pipe"; then - global_symbol_to_cdecl= - global_symbol_to_c_name_address= -else - global_symbol_to_cdecl="$lt_cv_global_symbol_to_cdecl" - global_symbol_to_c_name_address="$lt_cv_global_symbol_to_c_name_address" -fi -if test -z "$global_symbol_pipe$global_symbol_to_cdec$global_symbol_to_c_name_address"; -then - AC_MSG_RESULT(failed) -else - AC_MSG_RESULT(ok) -fi -]) # AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE + case $lt_cv_dlopen in + dlopen) + save_CPPFLAGS="$CPPFLAGS" + test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" -# _LT_AC_LIBTOOL_SYS_PATH_SEPARATOR -# --------------------------------- -AC_DEFUN([_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR], -[# Find the correct PATH separator. Usually this is `:', but -# DJGPP uses `;' like DOS. -if test "X${PATH_SEPARATOR+set}" != Xset; then - UNAME=${UNAME-`uname 2>/dev/null`} - case X$UNAME in - *-DOS) lt_cv_sys_path_separator=';' ;; - *) lt_cv_sys_path_separator=':' ;; - esac - PATH_SEPARATOR=$lt_cv_sys_path_separator -fi -])# _LT_AC_LIBTOOL_SYS_PATH_SEPARATOR + save_LDFLAGS="$LDFLAGS" + eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" -# _LT_AC_PROG_ECHO_BACKSLASH -# -------------------------- -# Add some code to the start of the generated configure script which -# will find an echo command which doesn't interpret backslashes. -AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH], -[ifdef([AC_DIVERSION_NOTICE], [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)], - [AC_DIVERT_PUSH(NOTICE)]) -_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR + save_LIBS="$LIBS" + LIBS="$lt_cv_dlopen_libs $LIBS" -# Check that we are running under the correct shell. -SHELL=${CONFIG_SHELL-/bin/sh} + AC_CACHE_CHECK([whether a program can dlopen itself], + lt_cv_dlopen_self, [dnl + _LT_AC_TRY_DLOPEN_SELF( + lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes, + lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross) + ]) -case X$ECHO in -X*--fallback-echo) - # Remove one level of quotation (which was required for Make). - ECHO=`echo "$ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','` - ;; -esac + if test "x$lt_cv_dlopen_self" = xyes; then + LDFLAGS="$LDFLAGS $link_static_flag" + AC_CACHE_CHECK([whether a statically linked program can dlopen itself], + lt_cv_dlopen_self_static, [dnl + _LT_AC_TRY_DLOPEN_SELF( + lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes, + lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross) + ]) + fi -echo=${ECHO-echo} -if test "X[$]1" = X--no-reexec; then - # Discard the --no-reexec flag, and continue. - shift -elif test "X[$]1" = X--fallback-echo; then - # Avoid inline document here, it may be left over - : -elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then - # Yippee, $echo works! - : -else - # Restart under the correct shell. - exec $SHELL "[$]0" --no-reexec ${1+"[$]@"} -fi + CPPFLAGS="$save_CPPFLAGS" + LDFLAGS="$save_LDFLAGS" + LIBS="$save_LIBS" + ;; + esac -if test "X[$]1" = X--fallback-echo; then - # used as fallback echo - shift - cat </dev/null && - echo_test_string="`eval $cmd`" && - (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null - then - break +# AC_LIBTOOL_PROG_CC_C_O([TAGNAME]) +# --------------------------------- +# Check to see if options -c and -o are simultaneously supported by compiler +AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O], +[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl +AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext], + [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)], + [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no + $rm -r conftest 2>/dev/null + mkdir conftest + cd conftest + mkdir out + printf "$lt_simple_compile_test_code" > conftest.$ac_ext + + lt_compiler_flag="-o out/conftest2.$ac_objext" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ + -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&AS_MESSAGE_LOG_FD + echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + if test ! -s out/conftest.err; then + _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes + fi + fi + chmod u+w . + $rm conftest* + # SGI C++ compiler will create directory out/ii_files/ for + # template instantiation + test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files + $rm out/* && rmdir out + cd .. + rmdir conftest + $rm conftest* +]) +])# AC_LIBTOOL_PROG_CC_C_O + + +# AC_LIBTOOL_SYS_HARD_LINK_LOCKS([TAGNAME]) +# ----------------------------------------- +# Check to see if we can do hard links to lock some files if needed +AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], +[AC_REQUIRE([_LT_AC_LOCK])dnl + +hard_links="nottested" +if test "$_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then + # do not overwrite the value of need_locks provided by the user + AC_MSG_CHECKING([if we can lock with hard links]) + hard_links=yes + $rm conftest* + ln conftest.a conftest.b 2>/dev/null && hard_links=no + touch conftest.a + ln conftest.a conftest.b 2>&5 || hard_links=no + ln conftest.a conftest.b 2>/dev/null && hard_links=no + AC_MSG_RESULT([$hard_links]) + if test "$hard_links" = no; then + AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe]) + need_locks=warn + fi +else + need_locks=no +fi +])# AC_LIBTOOL_SYS_HARD_LINK_LOCKS + + +# AC_LIBTOOL_OBJDIR +# ----------------- +AC_DEFUN([AC_LIBTOOL_OBJDIR], +[AC_CACHE_CHECK([for objdir], [lt_cv_objdir], +[rm -f .libs 2>/dev/null +mkdir .libs 2>/dev/null +if test -d .libs; then + lt_cv_objdir=.libs +else + # MS-DOS does not allow filenames that begin with a dot. + lt_cv_objdir=_libs +fi +rmdir .libs 2>/dev/null]) +objdir=$lt_cv_objdir +])# AC_LIBTOOL_OBJDIR + + +# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH([TAGNAME]) +# ---------------------------------------------- +# Check hardcoding attributes. +AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], +[AC_MSG_CHECKING([how to hardcode library paths into programs]) +_LT_AC_TAGVAR(hardcode_action, $1)= +if test -n "$_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)" || \ + test -n "$_LT_AC_TAGVAR(runpath_var $1)" || \ + test "X$_LT_AC_TAGVAR(hardcode_automatic, $1)"="Xyes" ; then + + # We can hardcode non-existant directories. + if test "$_LT_AC_TAGVAR(hardcode_direct, $1)" != no && + # If the only mechanism to avoid hardcoding is shlibpath_var, we + # have to relink, otherwise we might link with an installed library + # when we should be linking with a yet-to-be-installed one + ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)" != no && + test "$_LT_AC_TAGVAR(hardcode_minus_L, $1)" != no; then + # Linking always hardcodes the temporary library directory. + _LT_AC_TAGVAR(hardcode_action, $1)=relink + else + # We can link without hardcoding, and we can hardcode nonexisting dirs. + _LT_AC_TAGVAR(hardcode_action, $1)=immediate + fi +else + # We cannot hardcode anything, or else we can only hardcode existing + # directories. + _LT_AC_TAGVAR(hardcode_action, $1)=unsupported +fi +AC_MSG_RESULT([$_LT_AC_TAGVAR(hardcode_action, $1)]) + +if test "$_LT_AC_TAGVAR(hardcode_action, $1)" = relink; then + # Fast installation is not supported + enable_fast_install=no +elif test "$shlibpath_overrides_runpath" = yes || + test "$enable_shared" = no; then + # Fast installation is not necessary + enable_fast_install=needless +fi +])# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH + + +# AC_LIBTOOL_SYS_LIB_STRIP +# ------------------------ +AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP], +[striplib= +old_striplib= +AC_MSG_CHECKING([whether stripping libraries is possible]) +if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then + test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" + test -z "$striplib" && striplib="$STRIP --strip-unneeded" + AC_MSG_RESULT([yes]) +else +# FIXME - insert some real tests, host_os isn't really good enough + case $host_os in + darwin*) + if test -n "$STRIP" ; then + striplib="$STRIP -x" + AC_MSG_RESULT([yes]) + else + AC_MSG_RESULT([no]) +fi + ;; + *) + AC_MSG_RESULT([no]) + ;; + esac +fi +])# AC_LIBTOOL_SYS_LIB_STRIP + + +# AC_LIBTOOL_SYS_DYNAMIC_LINKER +# ----------------------------- +# PORTME Fill in your ld.so characteristics +AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER], +[AC_MSG_CHECKING([dynamic linker characteristics]) +library_names_spec= +libname_spec='lib$name' +soname_spec= +shrext_cmds=".so" +postinstall_cmds= +postuninstall_cmds= +finish_cmds= +finish_eval= +shlibpath_var= +shlibpath_overrides_runpath=unknown +version_type=none +dynamic_linker="$host_os ld.so" +sys_lib_dlsearch_path_spec="/lib /usr/lib" +if test "$GCC" = yes; then + sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` + if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then + # if the path contains ";" then we assume it to be the separator + # otherwise default to the standard path separator (i.e. ":") - it is + # assumed that no part of a normal pathname contains ";" but that should + # okay in the real world where ";" in dirpaths is itself problematic. + sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` + else + sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + fi +else + sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" +fi +need_lib_prefix=unknown +hardcode_into_libs=no + +# when you set need_version to no, make sure it does not cause -set_version +# flags to be left without arguments +need_version=unknown + +case $host_os in +aix3*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' + shlibpath_var=LIBPATH + + # AIX 3 has no versioning support, so we append a major version to the name. + soname_spec='${libname}${release}${shared_ext}$major' + ;; + +aix4* | aix5*) + version_type=linux + need_lib_prefix=no + need_version=no + hardcode_into_libs=yes + if test "$host_cpu" = ia64; then + # AIX 5 supports IA64 + library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + else + # With GCC up to 2.95.x, collect2 would create an import file + # for dependence libraries. The import file would start with + # the line `#! .'. This would cause the generated library to + # depend on `.', always an invalid library. This was fixed in + # development snapshots of GCC prior to 3.0. + case $host_os in + aix4 | aix4.[[01]] | aix4.[[01]].*) + if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' + echo ' yes ' + echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then + : + else + can_build_shared=no + fi + ;; + esac + # AIX (on Power*) has no versioning support, so currently we can not hardcode correct + # soname into executable. Probably we can add versioning support to + # collect2, so additional links can be useful in future. + if test "$aix_use_runtimelinking" = yes; then + # If using run time linking (on AIX 4.2 or later) use lib.so + # instead of lib.a to let people know that these are not + # typical AIX shared libraries. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + else + # We preserve .a as extension for shared libraries through AIX4.2 + # and later when we are not doing run time linking. + library_names_spec='${libname}${release}.a $libname.a' + soname_spec='${libname}${release}${shared_ext}$major' + fi + shlibpath_var=LIBPATH + fi + ;; + +amigaos*) + library_names_spec='$libname.ixlibrary $libname.a' + # Create ${libname}_ixlibrary.a entries in /sys/libs. + finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' + ;; + +beos*) + library_names_spec='${libname}${shared_ext}' + dynamic_linker="$host_os ld.so" + shlibpath_var=LIBRARY_PATH + ;; + +bsdi4*) + version_type=linux + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" + sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" + # the default ld.so.conf also contains /usr/contrib/lib and + # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow + # libtool to hard-code these into programs + ;; + +cygwin* | mingw* | pw32*) + version_type=windows + shrext_cmds=".dll" + need_version=no + need_lib_prefix=no + + case $GCC,$host_os in + yes,cygwin* | yes,mingw* | yes,pw32*) + library_names_spec='$libname.dll.a' + # DLL is installed to $(libdir)/../bin by postinstall_cmds + postinstall_cmds='base_file=`basename \${file}`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $rm \$dlpath' + shlibpath_overrides_runpath=yes + + case $host_os in + cygwin*) + # Cygwin DLLs use 'cyg' prefix rather than 'lib' + soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' + sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" + ;; + mingw*) + # MinGW DLLs use traditional 'lib' prefix + soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' + sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` + if echo "$sys_lib_search_path_spec" | [grep ';[c-zC-Z]:/' >/dev/null]; then + # It is most probably a Windows format PATH printed by + # mingw gcc, but we are running on Cygwin. Gcc prints its search + # path with ; separators, and with drive letters. We can handle the + # drive letters (cygwin fileutils understands them), so leave them, + # especially as we might pass files found there to a mingw objdump, + # which wouldn't understand a cygwinified path. Ahh. + sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` + else + sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + fi + ;; + pw32*) + # pw32 DLLs use 'pw' prefix rather than 'lib' + library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + ;; + esac + ;; + + *) + library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib' + ;; + esac + dynamic_linker='Win32 ld.exe' + # FIXME: first we should search . and the directory the executable is in + shlibpath_var=PATH + ;; + +darwin* | rhapsody*) + dynamic_linker="$host_os dyld" + version_type=darwin + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext' + soname_spec='${libname}${release}${major}$shared_ext' + shlibpath_overrides_runpath=yes + shlibpath_var=DYLD_LIBRARY_PATH + shrext_cmds='$(test .$module = .yes && echo .so || echo .dylib)' + # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same. + if test "$GCC" = yes; then + sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"` + else + sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib' + fi + sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' + ;; + +dgux*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +freebsd1*) + dynamic_linker=no + ;; + +kfreebsd*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='GNU ld.so' + ;; + +freebsd*) + objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout` + version_type=freebsd-$objformat + case $version_type in + freebsd-elf*) + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' + need_version=no + need_lib_prefix=no + ;; + freebsd-*) + library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' + need_version=yes + ;; + esac + shlibpath_var=LD_LIBRARY_PATH + case $host_os in + freebsd2*) + shlibpath_overrides_runpath=yes + ;; + freebsd3.[01]* | freebsdelf3.[01]*) + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + *) # from 3.2 on + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + esac + ;; + +gnu*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + hardcode_into_libs=yes + ;; + +hpux9* | hpux10* | hpux11*) + # Give a soname corresponding to the major version so that dld.sl refuses to + # link against other versions. + version_type=sunos + need_lib_prefix=no + need_version=no + case "$host_cpu" in + ia64*) + shrext_cmds='.so' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.so" + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + if test "X$HPUX_IA64_MODE" = X32; then + sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" + else + sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" + fi + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + hppa*64*) + shrext_cmds='.sl' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.sl" + shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + *) + shrext_cmds='.sl' + dynamic_linker="$host_os dld.sl" + shlibpath_var=SHLIB_PATH + shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + ;; + esac + # HP-UX runs *really* slowly unless shared libraries are mode 555. + postinstall_cmds='chmod 555 $lib' + ;; + +irix5* | irix6* | nonstopux*) + case $host_os in + nonstopux*) version_type=nonstopux ;; + *) + if test "$lt_cv_prog_gnu_ld" = yes; then + version_type=linux + else + version_type=irix + fi ;; + esac + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' + case $host_os in + irix5* | nonstopux*) + libsuff= shlibsuff= + ;; + *) + case $LD in # libtool.m4 will add one of these switches to LD + *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") + libsuff= shlibsuff= libmagic=32-bit;; + *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") + libsuff=32 shlibsuff=N32 libmagic=N32;; + *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") + libsuff=64 shlibsuff=64 libmagic=64-bit;; + *) libsuff= shlibsuff= libmagic=never-match;; + esac + ;; + esac + shlibpath_var=LD_LIBRARY${shlibsuff}_PATH + shlibpath_overrides_runpath=no + sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" + sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" + hardcode_into_libs=yes + ;; + +# No shared lib support for Linux oldld, aout, or coff. +linux*oldld* | linux*aout* | linux*coff*) + dynamic_linker=no + ;; + +# This must be Linux ELF. +linux*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + # This implies no fast_install, which is unacceptable. + # Some rework will be needed to allow for fast_install + # before this can be enabled. + hardcode_into_libs=yes + + # Append ld.so.conf contents to the search path + if test -f /etc/ld.so.conf; then + lt_ld_extra=`$SED -e 's/[:,\t]/ /g;s/=[^=]*$//;s/=[^= ]* / /g' /etc/ld.so.conf | tr '\n' ' '` + sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" + fi + + # We used to test for /lib/ld.so.1 and disable shared libraries on + # powerpc, because MkLinux only supported shared libraries with the + # GNU dynamic linker. Since this was broken with cross compilers, + # most powerpc-linux boxes support dynamic linking these days and + # people can always --disable-shared, the test was removed, and we + # assume the GNU/Linux dynamic linker is in use. + dynamic_linker='GNU/Linux ld.so' + ;; + +knetbsd*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='GNU ld.so' + ;; + +netbsd*) + version_type=sunos + need_lib_prefix=no + need_version=no + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + dynamic_linker='NetBSD (a.out) ld.so' + else + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + dynamic_linker='NetBSD ld.elf_so' + fi + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + +newsos6) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + ;; + +nto-qnx*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + ;; + +openbsd*) + version_type=sunos + need_lib_prefix=no + need_version=yes + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + shlibpath_var=LD_LIBRARY_PATH + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + case $host_os in + openbsd2.[[89]] | openbsd2.[[89]].*) + shlibpath_overrides_runpath=no + ;; + *) + shlibpath_overrides_runpath=yes + ;; + esac + else + shlibpath_overrides_runpath=yes + fi + ;; + +os2*) + libname_spec='$name' + shrext_cmds=".dll" + need_lib_prefix=no + library_names_spec='$libname${shared_ext} $libname.a' + dynamic_linker='OS/2 ld.exe' + shlibpath_var=LIBPATH + ;; + +osf3* | osf4* | osf5*) + version_type=osf + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" + sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" + ;; + +sco3.2v5*) + version_type=osf + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + ;; + +solaris*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + # ldd complains unless libraries are executable + postinstall_cmds='chmod +x $lib' + ;; + +sunos4*) + version_type=sunos + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + if test "$with_gnu_ld" = yes; then + need_lib_prefix=no + fi + need_version=yes + ;; + +sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + case $host_vendor in + sni) + shlibpath_overrides_runpath=no + need_lib_prefix=no + export_dynamic_flag_spec='${wl}-Blargedynsym' + runpath_var=LD_RUN_PATH + ;; + siemens) + need_lib_prefix=no + ;; + motorola) + need_lib_prefix=no + need_version=no + shlibpath_overrides_runpath=no + sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' + ;; + esac + ;; + +sysv4*MP*) + if test -d /usr/nec ;then + version_type=linux + library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' + soname_spec='$libname${shared_ext}.$major' + shlibpath_var=LD_LIBRARY_PATH + fi + ;; + +uts4*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +*) + dynamic_linker=no + ;; +esac +AC_MSG_RESULT([$dynamic_linker]) +test "$dynamic_linker" = no && can_build_shared=no +])# AC_LIBTOOL_SYS_DYNAMIC_LINKER + + +# _LT_AC_TAGCONFIG +# ---------------- +AC_DEFUN([_LT_AC_TAGCONFIG], +[AC_ARG_WITH([tags], + [AC_HELP_STRING([--with-tags@<:@=TAGS@:>@], + [include additional configurations @<:@automatic@:>@])], + [tagnames="$withval"]) + +if test -f "$ltmain" && test -n "$tagnames"; then + if test ! -f "${ofile}"; then + AC_MSG_WARN([output file `$ofile' does not exist]) + fi + + if test -z "$LTCC"; then + eval "`$SHELL ${ofile} --config | grep '^LTCC='`" + if test -z "$LTCC"; then + AC_MSG_WARN([output file `$ofile' does not look like a libtool script]) + else + AC_MSG_WARN([using `LTCC=$LTCC', extracted from `$ofile']) fi - done -fi + fi -if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - : -else - # The Solaris, AIX, and Digital Unix default echo programs unquote - # backslashes. This makes it impossible to quote backslashes using - # echo "$something" | sed 's/\\/\\\\/g' - # - # So, first we look for a working echo in the user's PATH. + # Extract list of available tagged configurations in $ofile. + # Note that this assumes the entire list is on one line. + available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'` + + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for tagname in $tagnames; do + IFS="$lt_save_ifs" + # Check whether tagname contains only valid characters + case `$echo "X$tagname" | $Xsed -e 's:[[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]]::g'` in + "") ;; + *) AC_MSG_ERROR([invalid tag name: $tagname]) + ;; + esac - IFS="${IFS= }"; save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for dir in $PATH /usr/ucb; do - if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && - test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - echo="$dir/echo" - break + if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null + then + AC_MSG_ERROR([tag name \"$tagname\" already exists]) fi - done - IFS="$save_ifs" - if test "X$echo" = Xecho; then - # We didn't find a better echo, so look for alternatives. - if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - # This shell has a builtin print -r that does the trick. - echo='print -r' - elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) && - test "X$CONFIG_SHELL" != X/bin/ksh; then - # If we have ksh, try running configure again with it. - ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} - export ORIGINAL_CONFIG_SHELL - CONFIG_SHELL=/bin/ksh - export CONFIG_SHELL - exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"} - else - # Try using printf. - echo='printf %s\n' - if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - # Cool, printf works - : - elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && - test "X$echo_testing_string" = 'X\t' && - echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL - export CONFIG_SHELL - SHELL="$CONFIG_SHELL" - export SHELL - echo="$CONFIG_SHELL [$]0 --fallback-echo" - elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && - test "X$echo_testing_string" = 'X\t' && - echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - echo="$CONFIG_SHELL [$]0 --fallback-echo" - else - # maybe with a smaller string... - prev=: + # Update the list of available tags. + if test -n "$tagname"; then + echo appending configuration tag \"$tagname\" to $ofile + + case $tagname in + CXX) + if test -n "$CXX" && test "X$CXX" != "Xno"; then + AC_LIBTOOL_LANG_CXX_CONFIG + else + tagname="" + fi + ;; - for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do - if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null - then - break - fi - prev="$cmd" - done + F77) + if test -n "$F77" && test "X$F77" != "Xno"; then + AC_LIBTOOL_LANG_F77_CONFIG + else + tagname="" + fi + ;; - if test "$prev" != 'sed 50q "[$]0"'; then - echo_test_string=`eval $prev` - export echo_test_string - exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"} + GCJ) + if test -n "$GCJ" && test "X$GCJ" != "Xno"; then + AC_LIBTOOL_LANG_GCJ_CONFIG else - # Oops. We lost completely, so just stick with echo. - echo=echo + tagname="" fi - fi + ;; + + RC) + AC_LIBTOOL_LANG_RC_CONFIG + ;; + + *) + AC_MSG_ERROR([Unsupported tag name: $tagname]) + ;; + esac + + # Append the new tag name to the list of available tags. + if test -n "$tagname" ; then + available_tags="$available_tags $tagname" fi - fi -fi -fi + fi + done + IFS="$lt_save_ifs" -# Copy echo and quote the copy suitably for passing to libtool from -# the Makefile, instead of quoting the original, which is used later. -ECHO=$echo -if test "X$ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then - ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo" + # Now substitute the updated list of available tags. + if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then + mv "${ofile}T" "$ofile" + chmod +x "$ofile" + else + rm -f "${ofile}T" + AC_MSG_ERROR([unable to update list of available tagged configurations.]) + fi fi +])# _LT_AC_TAGCONFIG -AC_SUBST(ECHO) -AC_DIVERT_POP -])# _LT_AC_PROG_ECHO_BACKSLASH -# _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE, -# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING) -# ------------------------------------------------------------------ -AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF], -[if test "$cross_compiling" = yes; then : - [$4] -else - AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl - lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 - lt_status=$lt_dlunknown - cat > conftest.$ac_ext < -#endif -#include +# AC_LIBTOOL_WIN32_DLL +# -------------------- +# declare package support for building win32 dll's +AC_DEFUN([AC_LIBTOOL_WIN32_DLL], +[AC_BEFORE([$0], [AC_LIBTOOL_SETUP]) +])# AC_LIBTOOL_WIN32_DLL -#ifdef RTLD_GLOBAL -# define LT_DLGLOBAL RTLD_GLOBAL -#else -# ifdef DL_GLOBAL -# define LT_DLGLOBAL DL_GLOBAL -# else -# define LT_DLGLOBAL 0 -# endif -#endif -/* We may have to define LT_DLLAZY_OR_NOW in the command line if we - find out it does not work in some platform. */ -#ifndef LT_DLLAZY_OR_NOW -# ifdef RTLD_LAZY -# define LT_DLLAZY_OR_NOW RTLD_LAZY -# else -# ifdef DL_LAZY -# define LT_DLLAZY_OR_NOW DL_LAZY -# else -# ifdef RTLD_NOW -# define LT_DLLAZY_OR_NOW RTLD_NOW -# else -# ifdef DL_NOW -# define LT_DLLAZY_OR_NOW DL_NOW -# else -# define LT_DLLAZY_OR_NOW 0 -# endif -# endif -# endif -# endif -#endif +# AC_ENABLE_SHARED([DEFAULT]) +# --------------------------- +# implement the --enable-shared flag +# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. +AC_DEFUN([AC_ENABLE_SHARED], +[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl +AC_ARG_ENABLE([shared], + [AC_HELP_STRING([--enable-shared@<:@=PKGS@:>@], + [build shared libraries @<:@default=]AC_ENABLE_SHARED_DEFAULT[@:>@])], + [p=${PACKAGE-default} + case $enableval in + yes) enable_shared=yes ;; + no) enable_shared=no ;; + *) + enable_shared=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_shared=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac], + [enable_shared=]AC_ENABLE_SHARED_DEFAULT) +])# AC_ENABLE_SHARED -#ifdef __cplusplus -extern "C" void exit (int); -#endif -void fnord() { int i=42;} -int main () -{ - void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); - int status = $lt_dlunknown; +# AC_DISABLE_SHARED +# ----------------- +#- set the default shared flag to --disable-shared +AC_DEFUN([AC_DISABLE_SHARED], +[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl +AC_ENABLE_SHARED(no) +])# AC_DISABLE_SHARED - if (self) - { - if (dlsym (self,"fnord")) status = $lt_dlno_uscore; - else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; - /* dlclose (self); */ - } - exit (status); -}] -EOF - if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then - (./conftest; exit; ) 2>/dev/null - lt_status=$? - case x$lt_status in - x$lt_dlno_uscore) $1 ;; - x$lt_dlneed_uscore) $2 ;; - x$lt_unknown|x*) $3 ;; - esac - else : - # compilation failed - $3 - fi -fi -rm -fr conftest* -])# _LT_AC_TRY_DLOPEN_SELF +# AC_ENABLE_STATIC([DEFAULT]) +# --------------------------- +# implement the --enable-static flag +# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. +AC_DEFUN([AC_ENABLE_STATIC], +[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl +AC_ARG_ENABLE([static], + [AC_HELP_STRING([--enable-static@<:@=PKGS@:>@], + [build static libraries @<:@default=]AC_ENABLE_STATIC_DEFAULT[@:>@])], + [p=${PACKAGE-default} + case $enableval in + yes) enable_static=yes ;; + no) enable_static=no ;; + *) + enable_static=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_static=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac], + [enable_static=]AC_ENABLE_STATIC_DEFAULT) +])# AC_ENABLE_STATIC -# AC_LIBTOOL_DLOPEN_SELF -# ------------------- -AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], -[if test "x$enable_dlopen" != xyes; then - enable_dlopen=unknown - enable_dlopen_self=unknown - enable_dlopen_self_static=unknown -else - lt_cv_dlopen=no - lt_cv_dlopen_libs= - case $host_os in - beos*) - lt_cv_dlopen="load_add_on" - lt_cv_dlopen_libs= - lt_cv_dlopen_self=yes - ;; +# AC_DISABLE_STATIC +# ----------------- +# set the default static flag to --disable-static +AC_DEFUN([AC_DISABLE_STATIC], +[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl +AC_ENABLE_STATIC(no) +])# AC_DISABLE_STATIC - cygwin* | mingw* | pw32*) - lt_cv_dlopen="LoadLibrary" - lt_cv_dlopen_libs= - ;; - *) - AC_CHECK_FUNC([shl_load], - [lt_cv_dlopen="shl_load"], - [AC_CHECK_LIB([dld], [shl_load], - [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"], - [AC_CHECK_FUNC([dlopen], - [lt_cv_dlopen="dlopen"], - [AC_CHECK_LIB([dl], [dlopen], - [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"], - [AC_CHECK_LIB([svld], [dlopen], - [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"], - [AC_CHECK_LIB([dld], [dld_link], - [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"]) - ]) - ]) - ]) - ]) - ]) - ;; - esac +# AC_ENABLE_FAST_INSTALL([DEFAULT]) +# --------------------------------- +# implement the --enable-fast-install flag +# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. +AC_DEFUN([AC_ENABLE_FAST_INSTALL], +[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl +AC_ARG_ENABLE([fast-install], + [AC_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@], + [optimize for fast installation @<:@default=]AC_ENABLE_FAST_INSTALL_DEFAULT[@:>@])], + [p=${PACKAGE-default} + case $enableval in + yes) enable_fast_install=yes ;; + no) enable_fast_install=no ;; + *) + enable_fast_install=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_fast_install=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac], + [enable_fast_install=]AC_ENABLE_FAST_INSTALL_DEFAULT) +])# AC_ENABLE_FAST_INSTALL - if test "x$lt_cv_dlopen" != xno; then - enable_dlopen=yes - else - enable_dlopen=no - fi - case $lt_cv_dlopen in - dlopen) - save_CPPFLAGS="$CPPFLAGS" - AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl - test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" +# AC_DISABLE_FAST_INSTALL +# ----------------------- +# set the default to --disable-fast-install +AC_DEFUN([AC_DISABLE_FAST_INSTALL], +[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl +AC_ENABLE_FAST_INSTALL(no) +])# AC_DISABLE_FAST_INSTALL - save_LDFLAGS="$LDFLAGS" - eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" - save_LIBS="$LIBS" - LIBS="$lt_cv_dlopen_libs $LIBS" +# AC_LIBTOOL_PICMODE([MODE]) +# -------------------------- +# implement the --with-pic flag +# MODE is either `yes' or `no'. If omitted, it defaults to `both'. +AC_DEFUN([AC_LIBTOOL_PICMODE], +[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl +pic_mode=ifelse($#,1,$1,default) +])# AC_LIBTOOL_PICMODE - AC_CACHE_CHECK([whether a program can dlopen itself], - lt_cv_dlopen_self, [dnl - _LT_AC_TRY_DLOPEN_SELF( - lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes, - lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross) - ]) - if test "x$lt_cv_dlopen_self" = xyes; then - LDFLAGS="$LDFLAGS $link_static_flag" - AC_CACHE_CHECK([whether a statically linked program can dlopen itself], - lt_cv_dlopen_self_static, [dnl - _LT_AC_TRY_DLOPEN_SELF( - lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes, - lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross) - ]) +# AC_PROG_EGREP +# ------------- +# This is predefined starting with Autoconf 2.54, so this conditional +# definition can be removed once we require Autoconf 2.54 or later. +m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP], +[AC_CACHE_CHECK([for egrep], [ac_cv_prog_egrep], + [if echo a | (grep -E '(a|b)') >/dev/null 2>&1 + then ac_cv_prog_egrep='grep -E' + else ac_cv_prog_egrep='egrep' + fi]) + EGREP=$ac_cv_prog_egrep + AC_SUBST([EGREP]) +])]) + + +# AC_PATH_TOOL_PREFIX +# ------------------- +# find a file program which can recognise shared library +AC_DEFUN([AC_PATH_TOOL_PREFIX], +[AC_REQUIRE([AC_PROG_EGREP])dnl +AC_MSG_CHECKING([for $1]) +AC_CACHE_VAL(lt_cv_path_MAGIC_CMD, +[case $MAGIC_CMD in +[[\\/*] | ?:[\\/]*]) + lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. + ;; +*) + lt_save_MAGIC_CMD="$MAGIC_CMD" + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR +dnl $ac_dummy forces splitting on constant user-supplied paths. +dnl POSIX.2 word splitting is done only on the output of word expansions, +dnl not every word. This closes a longstanding sh security hole. + ac_dummy="ifelse([$2], , $PATH, [$2])" + for ac_dir in $ac_dummy; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$1; then + lt_cv_path_MAGIC_CMD="$ac_dir/$1" + if test -n "$file_magic_test_file"; then + case $deplibs_check_method in + "file_magic "*) + file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`" + MAGIC_CMD="$lt_cv_path_MAGIC_CMD" + if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | + $EGREP "$file_magic_regex" > /dev/null; then + : + else + cat <&2 + +*** Warning: the command libtool uses to detect shared libraries, +*** $file_magic_cmd, produces output that libtool cannot recognize. +*** The result is that libtool may fail to recognize shared libraries +*** as such. This will affect the creation of libtool libraries that +*** depend on shared libraries, but programs linked with such libtool +*** libraries will work regardless of this problem. Nevertheless, you +*** may want to report the problem to your system manager and/or to +*** bug-libtool@gnu.org + +EOF + fi ;; + esac + fi + break fi + done + IFS="$lt_save_ifs" + MAGIC_CMD="$lt_save_MAGIC_CMD" + ;; +esac]) +MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +if test -n "$MAGIC_CMD"; then + AC_MSG_RESULT($MAGIC_CMD) +else + AC_MSG_RESULT(no) +fi +])# AC_PATH_TOOL_PREFIX - CPPFLAGS="$save_CPPFLAGS" - LDFLAGS="$save_LDFLAGS" - LIBS="$save_LIBS" - ;; - esac - case $lt_cv_dlopen_self in - yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; - *) enable_dlopen_self=unknown ;; - esac +# AC_PATH_MAGIC +# ------------- +# find a file program which can recognise a shared library +AC_DEFUN([AC_PATH_MAGIC], +[AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH) +if test -z "$lt_cv_path_MAGIC_CMD"; then + if test -n "$ac_tool_prefix"; then + AC_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH) + else + MAGIC_CMD=: + fi +fi +])# AC_PATH_MAGIC - case $lt_cv_dlopen_self_static in - yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; - *) enable_dlopen_self_static=unknown ;; + +# AC_PROG_LD +# ---------- +# find the pathname to the GNU or non-GNU linker +AC_DEFUN([AC_PROG_LD], +[AC_ARG_WITH([gnu-ld], + [AC_HELP_STRING([--with-gnu-ld], + [assume the C compiler uses GNU ld @<:@default=no@:>@])], + [test "$withval" = no || with_gnu_ld=yes], + [with_gnu_ld=no]) +AC_REQUIRE([LT_AC_PROG_SED])dnl +AC_REQUIRE([AC_PROG_CC])dnl +AC_REQUIRE([AC_CANONICAL_HOST])dnl +AC_REQUIRE([AC_CANONICAL_BUILD])dnl +ac_prog=ld +if test "$GCC" = yes; then + # Check if gcc -print-prog-name=ld gives a path. + AC_MSG_CHECKING([for ld used by $CC]) + case $host in + *-*-mingw*) + # gcc leaves a trailing carriage return which upsets mingw + ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; + *) + ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; + esac + case $ac_prog in + # Accept absolute paths. + [[\\/]]* | ?:[[\\/]]*) + re_direlt='/[[^/]][[^/]]*/\.\./' + # Canonicalize the pathname of ld + ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'` + while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do + ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"` + done + test -z "$LD" && LD="$ac_prog" + ;; + "") + # If it fails, then pretend we aren't using GCC. + ac_prog=ld + ;; + *) + # If it is relative, then search for the first ld in PATH. + with_gnu_ld=unknown + ;; esac +elif test "$with_gnu_ld" = yes; then + AC_MSG_CHECKING([for GNU ld]) +else + AC_MSG_CHECKING([for non-GNU ld]) fi -])# AC_LIBTOOL_DLOPEN_SELF +AC_CACHE_VAL(lt_cv_path_LD, +[if test -z "$LD"; then + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then + lt_cv_path_LD="$ac_dir/$ac_prog" + # Check to see if the program is GNU ld. I'd rather use --version, + # but apparently some GNU ld's only accept -v. + # Break only if it was the GNU/non-GNU ld that we prefer. + case `"$lt_cv_path_LD" -v 2>&1 &1 /dev/null; then + case $host_cpu in + i*86 ) + # Not sure whether the presence of OpenBSD here was a mistake. + # Let's accept both of them until this is cleared up. + lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[[3-9]]86 (compact )?demand paged shared library' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` + ;; + esac + else + lt_cv_deplibs_check_method=pass_all fi ;; -esac -# Determine commands to create old-style static archives. -old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs' -old_postinstall_cmds='chmod 644 $oldlib' -old_postuninstall_cmds= +gnu*) + lt_cv_deplibs_check_method=pass_all + ;; -if test -n "$RANLIB"; then - case $host_os in - openbsd*) - old_postinstall_cmds="\$RANLIB -t \$oldlib~$old_postinstall_cmds" +hpux10.20* | hpux11*) + lt_cv_file_magic_cmd=/usr/bin/file + case "$host_cpu" in + ia64*) + lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64' + lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so + ;; + hppa*64*) + [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]'] + lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl ;; *) - old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds" + lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library' + lt_cv_file_magic_test_file=/usr/lib/libc.sl ;; esac - old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" -fi - -# Allow CC to be a program name with arguments. -set dummy $CC -compiler="[$]2" + ;; -AC_MSG_CHECKING([for objdir]) -rm -f .libs 2>/dev/null -mkdir .libs 2>/dev/null -if test -d .libs; then - objdir=.libs -else - # MS-DOS does not allow filenames that begin with a dot. - objdir=_libs -fi -rmdir .libs 2>/dev/null -AC_MSG_RESULT($objdir) +irix5* | irix6* | nonstopux*) + case $LD in + *-32|*"-32 ") libmagic=32-bit;; + *-n32|*"-n32 ") libmagic=N32;; + *-64|*"-64 ") libmagic=64-bit;; + *) libmagic=never-match;; + esac + lt_cv_deplibs_check_method=pass_all + ;; +# This must be Linux ELF. +linux*) + lt_cv_deplibs_check_method=pass_all + ;; -AC_ARG_WITH(pic, -[ --with-pic try to use only PIC/non-PIC objects [default=use both]], -pic_mode="$withval", pic_mode=default) -test -z "$pic_mode" && pic_mode=default +netbsd* | knetbsd*-gnu) + if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' + else + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$' + fi + ;; -# We assume here that the value for lt_cv_prog_cc_pic will not be cached -# in isolation, and that seeing it set (from the cache) indicates that -# the associated values are set (in the cache) correctly too. -AC_MSG_CHECKING([for $compiler option to produce PIC]) -AC_CACHE_VAL(lt_cv_prog_cc_pic, -[ lt_cv_prog_cc_pic= - lt_cv_prog_cc_shlib= - lt_cv_prog_cc_wl= - lt_cv_prog_cc_static= - lt_cv_prog_cc_no_builtin= - lt_cv_prog_cc_can_build_shared=$can_build_shared +newos6*) + lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=/usr/lib/libnls.so + ;; - if test "$GCC" = yes; then - lt_cv_prog_cc_wl='-Wl,' - lt_cv_prog_cc_static='-static' +nto-qnx*) + lt_cv_deplibs_check_method=unknown + ;; - case $host_os in - aix*) - # Below there is a dirty hack to force normal static linking with -ldl - # The problem is because libdl dynamically linked with both libc and - # libC (AIX C++ library), which obviously doesn't included in libraries - # list by gcc. This cause undefined symbols with -static flags. - # This hack allows C programs to be linked with "-static -ldl", but - # not sure about C++ programs. - lt_cv_prog_cc_static="$lt_cv_prog_cc_static ${lt_cv_prog_cc_wl}-lC" - ;; - amigaos*) - # FIXME: we need at least 68020 code to build shared libraries, but - # adding the `-m68020' flag to GCC prevents building anything better, - # like `-m68040'. - lt_cv_prog_cc_pic='-m68020 -resident32 -malways-restore-a4' - ;; - beos* | irix5* | irix6* | osf3* | osf4* | osf5*) - # PIC is the default for these OSes. - ;; - darwin* | rhapsody*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - lt_cv_prog_cc_pic='-fno-common' - ;; - cygwin* | mingw* | pw32* | os2*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - lt_cv_prog_cc_pic='-DDLL_EXPORT' - ;; - sysv4*MP*) - if test -d /usr/nec; then - lt_cv_prog_cc_pic=-Kconform_pic - fi - ;; - *) - lt_cv_prog_cc_pic='-fPIC' - ;; - esac +openbsd*) + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB shared object' else - # PORTME Check for PIC flags for the system compiler. - case $host_os in - aix3* | aix4* | aix5*) - lt_cv_prog_cc_wl='-Wl,' - # All AIX code is PIC. - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - lt_cv_prog_cc_static='-Bstatic' - else - lt_cv_prog_cc_static='-bnso -bI:/lib/syscalls.exp' - fi - ;; + lt_cv_deplibs_check_method='file_magic OpenBSD.* shared library' + fi + ;; + +osf3* | osf4* | osf5*) + lt_cv_deplibs_check_method=pass_all + ;; + +sco3.2v5*) + lt_cv_deplibs_check_method=pass_all + ;; + +solaris*) + lt_cv_deplibs_check_method=pass_all + ;; + +sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + case $host_vendor in + motorola) + lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]' + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` + ;; + ncr) + lt_cv_deplibs_check_method=pass_all + ;; + sequent) + lt_cv_file_magic_cmd='/bin/file' + lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' + ;; + sni) + lt_cv_file_magic_cmd='/bin/file' + lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib" + lt_cv_file_magic_test_file=/lib/libc.so + ;; + siemens) + lt_cv_deplibs_check_method=pass_all + ;; + esac + ;; + +sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7* | sysv4*uw2*) + lt_cv_deplibs_check_method=pass_all + ;; +esac +]) +file_magic_cmd=$lt_cv_file_magic_cmd +deplibs_check_method=$lt_cv_deplibs_check_method +test -z "$deplibs_check_method" && deplibs_check_method=unknown +])# AC_DEPLIBS_CHECK_METHOD + + +# AC_PROG_NM +# ---------- +# find the pathname to a BSD-compatible name lister +AC_DEFUN([AC_PROG_NM], +[AC_CACHE_CHECK([for BSD-compatible nm], lt_cv_path_NM, +[if test -n "$NM"; then + # Let the user override the test. + lt_cv_path_NM="$NM" +else + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + tmp_nm="$ac_dir/${ac_tool_prefix}nm" + if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then + # Check to see if the nm accepts a BSD-compat flag. + # Adding the `sed 1q' prevents false positives on HP-UX, which says: + # nm: unknown option "B" ignored + # Tru64's nm complains that /dev/null is an invalid object file + case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in + */dev/null* | *'Invalid file or object type'*) + lt_cv_path_NM="$tmp_nm -B" + break + ;; + *) + case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in + */dev/null*) + lt_cv_path_NM="$tmp_nm -p" + break + ;; + *) + lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but + continue # so that we can try to find one that supports BSD flags + ;; + esac + esac + fi + done + IFS="$lt_save_ifs" + test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm +fi]) +NM="$lt_cv_path_NM" +])# AC_PROG_NM - hpux9* | hpux10* | hpux11*) - # Is there a better lt_cv_prog_cc_static that works with the bundled CC? - lt_cv_prog_cc_wl='-Wl,' - lt_cv_prog_cc_static="${lt_cv_prog_cc_wl}-a ${lt_cv_prog_cc_wl}archive" - lt_cv_prog_cc_pic='+Z' - ;; - irix5* | irix6*) - lt_cv_prog_cc_wl='-Wl,' - lt_cv_prog_cc_static='-non_shared' - # PIC (with -KPIC) is the default. - ;; +# AC_CHECK_LIBM +# ------------- +# check for math library +AC_DEFUN([AC_CHECK_LIBM], +[AC_REQUIRE([AC_CANONICAL_HOST])dnl +LIBM= +case $host in +*-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*) + # These system don't have libm, or don't need it + ;; +*-ncr-sysv4.3*) + AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw") + AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm") + ;; +*) + AC_CHECK_LIB(m, cos, LIBM="-lm") + ;; +esac +])# AC_CHECK_LIBM - cygwin* | mingw* | pw32* | os2*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - lt_cv_prog_cc_pic='-DDLL_EXPORT' - ;; - newsos6) - lt_cv_prog_cc_pic='-KPIC' - lt_cv_prog_cc_static='-Bstatic' - ;; +# AC_LIBLTDL_CONVENIENCE([DIRECTORY]) +# ----------------------------------- +# sets LIBLTDL to the link flags for the libltdl convenience library and +# LTDLINCL to the include flags for the libltdl header and adds +# --enable-ltdl-convenience to the configure arguments. Note that LIBLTDL +# and LTDLINCL are not AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If +# DIRECTORY is not provided, it is assumed to be `libltdl'. LIBLTDL will +# be prefixed with '${top_builddir}/' and LTDLINCL will be prefixed with +# '${top_srcdir}/' (note the single quotes!). If your package is not +# flat and you're not using automake, define top_builddir and +# top_srcdir appropriately in the Makefiles. +AC_DEFUN([AC_LIBLTDL_CONVENIENCE], +[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl + case $enable_ltdl_convenience in + no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;; + "") enable_ltdl_convenience=yes + ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;; + esac + LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la + LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) + # For backwards non-gettext consistent compatibility... + INCLTDL="$LTDLINCL" +])# AC_LIBLTDL_CONVENIENCE + + +# AC_LIBLTDL_INSTALLABLE([DIRECTORY]) +# ----------------------------------- +# sets LIBLTDL to the link flags for the libltdl installable library and +# LTDLINCL to the include flags for the libltdl header and adds +# --enable-ltdl-install to the configure arguments. Note that LIBLTDL +# and LTDLINCL are not AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If +# DIRECTORY is not provided and an installed libltdl is not found, it is +# assumed to be `libltdl'. LIBLTDL will be prefixed with '${top_builddir}/' +# and LTDLINCL will be prefixed with '${top_srcdir}/' (note the single +# quotes!). If your package is not flat and you're not using automake, +# define top_builddir and top_srcdir appropriately in the Makefiles. +# In the future, this macro may have to be called after AC_PROG_LIBTOOL. +AC_DEFUN([AC_LIBLTDL_INSTALLABLE], +[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl + AC_CHECK_LIB(ltdl, lt_dlinit, + [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no], + [if test x"$enable_ltdl_install" = xno; then + AC_MSG_WARN([libltdl not installed, but installation disabled]) + else + enable_ltdl_install=yes + fi + ]) + if test x"$enable_ltdl_install" = x"yes"; then + ac_configure_args="$ac_configure_args --enable-ltdl-install" + LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la + LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) + else + ac_configure_args="$ac_configure_args --enable-ltdl-install=no" + LIBLTDL="-lltdl" + LTDLINCL= + fi + # For backwards non-gettext consistent compatibility... + INCLTDL="$LTDLINCL" +])# AC_LIBLTDL_INSTALLABLE - osf3* | osf4* | osf5*) - # All OSF/1 code is PIC. - lt_cv_prog_cc_wl='-Wl,' - lt_cv_prog_cc_static='-non_shared' - ;; - sco3.2v5*) - lt_cv_prog_cc_pic='-Kpic' - lt_cv_prog_cc_static='-dn' - lt_cv_prog_cc_shlib='-belf' - ;; +# AC_LIBTOOL_CXX +# -------------- +# enable support for C++ libraries +AC_DEFUN([AC_LIBTOOL_CXX], +[AC_REQUIRE([_LT_AC_LANG_CXX]) +])# AC_LIBTOOL_CXX - solaris*) - lt_cv_prog_cc_pic='-KPIC' - lt_cv_prog_cc_static='-Bstatic' - lt_cv_prog_cc_wl='-Wl,' - ;; - sunos4*) - lt_cv_prog_cc_pic='-PIC' - lt_cv_prog_cc_static='-Bstatic' - lt_cv_prog_cc_wl='-Qoption ld ' - ;; +# _LT_AC_LANG_CXX +# --------------- +AC_DEFUN([_LT_AC_LANG_CXX], +[AC_REQUIRE([AC_PROG_CXX]) +AC_REQUIRE([AC_PROG_CXXCPP]) +_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}CXX]) +])# _LT_AC_LANG_CXX + + +# AC_LIBTOOL_F77 +# -------------- +# enable support for Fortran 77 libraries +AC_DEFUN([AC_LIBTOOL_F77], +[AC_REQUIRE([_LT_AC_LANG_F77]) +])# AC_LIBTOOL_F77 - sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) - lt_cv_prog_cc_pic='-KPIC' - lt_cv_prog_cc_static='-Bstatic' - if test "x$host_vendor" = xsni; then - lt_cv_prog_cc_wl='-LD' - else - lt_cv_prog_cc_wl='-Wl,' - fi - ;; - uts4*) - lt_cv_prog_cc_pic='-pic' - lt_cv_prog_cc_static='-Bstatic' - ;; +# _LT_AC_LANG_F77 +# --------------- +AC_DEFUN([_LT_AC_LANG_F77], +[AC_REQUIRE([AC_PROG_F77]) +_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}F77]) +])# _LT_AC_LANG_F77 - sysv4*MP*) - if test -d /usr/nec ;then - lt_cv_prog_cc_pic='-Kconform_pic' - lt_cv_prog_cc_static='-Bstatic' - fi - ;; - *) - lt_cv_prog_cc_can_build_shared=no - ;; - esac - fi -]) -if test -z "$lt_cv_prog_cc_pic"; then - AC_MSG_RESULT([none]) -else - AC_MSG_RESULT([$lt_cv_prog_cc_pic]) +# AC_LIBTOOL_GCJ +# -------------- +# enable support for GCJ libraries +AC_DEFUN([AC_LIBTOOL_GCJ], +[AC_REQUIRE([_LT_AC_LANG_GCJ]) +])# AC_LIBTOOL_GCJ - # Check to make sure the pic_flag actually works. - AC_MSG_CHECKING([if $compiler PIC flag $lt_cv_prog_cc_pic works]) - AC_CACHE_VAL(lt_cv_prog_cc_pic_works, [dnl - save_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS $lt_cv_prog_cc_pic -DPIC" - AC_TRY_COMPILE([], [], [dnl - case $host_os in - hpux9* | hpux10* | hpux11*) - # On HP-UX, both CC and GCC only warn that PIC is supported... then - # they create non-PIC objects. So, if there were any warnings, we - # assume that PIC is not supported. - if test -s conftest.err; then - lt_cv_prog_cc_pic_works=no - else - lt_cv_prog_cc_pic_works=yes - fi - ;; - *) - lt_cv_prog_cc_pic_works=yes - ;; - esac - ], [dnl - lt_cv_prog_cc_pic_works=no - ]) - CFLAGS="$save_CFLAGS" - ]) - if test "X$lt_cv_prog_cc_pic_works" = Xno; then - lt_cv_prog_cc_pic= - lt_cv_prog_cc_can_build_shared=no - else - lt_cv_prog_cc_pic=" $lt_cv_prog_cc_pic" - fi +# _LT_AC_LANG_GCJ +# --------------- +AC_DEFUN([_LT_AC_LANG_GCJ], +[AC_PROVIDE_IFELSE([AC_PROG_GCJ],[], + [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[], + [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[], + [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])], + [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])], + [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])]) +_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}GCJ]) +])# _LT_AC_LANG_GCJ + + +# AC_LIBTOOL_RC +# -------------- +# enable support for Windows resource files +AC_DEFUN([AC_LIBTOOL_RC], +[AC_REQUIRE([LT_AC_PROG_RC]) +_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}RC]) +])# AC_LIBTOOL_RC - AC_MSG_RESULT([$lt_cv_prog_cc_pic_works]) -fi -# Check for any special shared library compilation flags. -if test -n "$lt_cv_prog_cc_shlib"; then - AC_MSG_WARN([\`$CC' requires \`$lt_cv_prog_cc_shlib' to build shared libraries]) - if echo "$old_CC $old_CFLAGS " | egrep -e "[[ ]]$lt_cv_prog_cc_shlib[[ ]]" >/dev/null; then : - else - AC_MSG_WARN([add \`$lt_cv_prog_cc_shlib' to the CC or CFLAGS env variable and reconfigure]) - lt_cv_prog_cc_can_build_shared=no - fi -fi +# AC_LIBTOOL_LANG_C_CONFIG +# ------------------------ +# Ensure that the configuration vars for the C compiler are +# suitably defined. Those variables are subsequently used by +# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. +AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG], [_LT_AC_LANG_C_CONFIG]) +AC_DEFUN([_LT_AC_LANG_C_CONFIG], +[lt_save_CC="$CC" +AC_LANG_PUSH(C) + +# Source file extension for C test sources. +ac_ext=c + +# Object file extension for compiled C test sources. +objext=o +_LT_AC_TAGVAR(objext, $1)=$objext -AC_MSG_CHECKING([if $compiler static flag $lt_cv_prog_cc_static works]) -AC_CACHE_VAL([lt_cv_prog_cc_static_works], [dnl - lt_cv_prog_cc_static_works=no - save_LDFLAGS="$LDFLAGS" - LDFLAGS="$LDFLAGS $lt_cv_prog_cc_static" - AC_TRY_LINK([], [], [lt_cv_prog_cc_static_works=yes]) - LDFLAGS="$save_LDFLAGS" -]) +# Code to be used in simple compile tests +lt_simple_compile_test_code="int some_variable = 0;\n" -# Belt *and* braces to stop my trousers falling down: -test "X$lt_cv_prog_cc_static_works" = Xno && lt_cv_prog_cc_static= -AC_MSG_RESULT([$lt_cv_prog_cc_static_works]) - -pic_flag="$lt_cv_prog_cc_pic" -special_shlib_compile_flags="$lt_cv_prog_cc_shlib" -wl="$lt_cv_prog_cc_wl" -link_static_flag="$lt_cv_prog_cc_static" -no_builtin_flag="$lt_cv_prog_cc_no_builtin" -can_build_shared="$lt_cv_prog_cc_can_build_shared" - - -# Check to see if options -o and -c are simultaneously supported by compiler -AC_MSG_CHECKING([if $compiler supports -c -o file.$ac_objext]) -AC_CACHE_VAL([lt_cv_compiler_c_o], [ -$rm -r conftest 2>/dev/null -mkdir conftest -cd conftest -echo "int some_variable = 0;" > conftest.$ac_ext -mkdir out -# According to Tom Tromey, Ian Lance Taylor reported there are C compilers -# that will create temporary files in the current directory regardless of -# the output directory. Thus, making CWD read-only will cause this test -# to fail, enabling locking or at least warning the user not to do parallel -# builds. -chmod -w . -save_CFLAGS="$CFLAGS" -CFLAGS="$CFLAGS -o out/conftest2.$ac_objext" -compiler_c_o=no -if { (eval echo configure:__oline__: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>out/conftest.err; } && test -s out/conftest2.$ac_objext; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s out/conftest.err; then - lt_cv_compiler_c_o=no - else - lt_cv_compiler_c_o=yes - fi -else - # Append any errors to the config.log. - cat out/conftest.err 1>&AC_FD_CC - lt_cv_compiler_c_o=no -fi -CFLAGS="$save_CFLAGS" -chmod u+w . -$rm conftest* out/* -rmdir out -cd .. -rmdir conftest -$rm -r conftest 2>/dev/null -]) -compiler_c_o=$lt_cv_compiler_c_o -AC_MSG_RESULT([$compiler_c_o]) +# Code to be used in simple link tests +lt_simple_link_test_code='int main(){return(0);}\n' -if test x"$compiler_c_o" = x"yes"; then - # Check to see if we can write to a .lo - AC_MSG_CHECKING([if $compiler supports -c -o file.lo]) - AC_CACHE_VAL([lt_cv_compiler_o_lo], [ - lt_cv_compiler_o_lo=no - save_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS -c -o conftest.lo" - save_objext="$ac_objext" - ac_objext=lo - AC_TRY_COMPILE([], [int some_variable = 0;], [dnl - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s conftest.err; then - lt_cv_compiler_o_lo=no - else - lt_cv_compiler_o_lo=yes - fi - ]) - ac_objext="$save_objext" - CFLAGS="$save_CFLAGS" - ]) - compiler_o_lo=$lt_cv_compiler_o_lo - AC_MSG_RESULT([$compiler_o_lo]) -else - compiler_o_lo=no -fi +_LT_AC_SYS_COMPILER -# Check to see if we can do hard links to lock some files if needed -hard_links="nottested" -if test "$compiler_c_o" = no && test "$need_locks" != no; then - # do not overwrite the value of need_locks provided by the user - AC_MSG_CHECKING([if we can lock with hard links]) - hard_links=yes - $rm conftest* - ln conftest.a conftest.b 2>/dev/null && hard_links=no - touch conftest.a - ln conftest.a conftest.b 2>&5 || hard_links=no - ln conftest.a conftest.b 2>/dev/null && hard_links=no - AC_MSG_RESULT([$hard_links]) - if test "$hard_links" = no; then - AC_MSG_WARN([\`$CC' does not support \`-c -o', so \`make -j' may be unsafe]) - need_locks=warn - fi -else - need_locks=no +# +# Check for any special shared library compilation flags. +# +_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)= +if test "$GCC" = no; then + case $host_os in + sco3.2v5*) + _LT_AC_TAGVAR(lt_prog_cc_shlib, $1)='-belf' + ;; + esac fi - -if test "$GCC" = yes; then - # Check to see if options -fno-rtti -fno-exceptions are supported by compiler - AC_MSG_CHECKING([if $compiler supports -fno-rtti -fno-exceptions]) - echo "int some_variable = 0;" > conftest.$ac_ext - save_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS -fno-rtti -fno-exceptions -c conftest.$ac_ext" - compiler_rtti_exceptions=no - AC_TRY_COMPILE([], [int some_variable = 0;], [dnl - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s conftest.err; then - compiler_rtti_exceptions=no - else - compiler_rtti_exceptions=yes - fi - ]) - CFLAGS="$save_CFLAGS" - AC_MSG_RESULT([$compiler_rtti_exceptions]) - - if test "$compiler_rtti_exceptions" = "yes"; then - no_builtin_flag=' -fno-builtin -fno-rtti -fno-exceptions' +if test -n "$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)"; then + AC_MSG_WARN([`$CC' requires `$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)' to build shared libraries]) + if echo "$old_CC $old_CFLAGS " | grep "[[ ]]$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)[[ ]]" >/dev/null; then : else - no_builtin_flag=' -fno-builtin' + AC_MSG_WARN([add `$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)' to the CC or CFLAGS env variable and reconfigure]) + _LT_AC_TAGVAR(lt_cv_prog_cc_can_build_shared, $1)=no fi fi -# See if the linker supports building shared libraries. -AC_MSG_CHECKING([whether the linker ($LD) supports shared libraries]) -allow_undefined_flag= -no_undefined_flag= -need_lib_prefix=unknown -need_version=unknown -# when you set need_version to no, make sure it does not cause -set_version -# flags to be left without arguments -archive_cmds= -archive_expsym_cmds= -old_archive_from_new_cmds= -old_archive_from_expsyms_cmds= -export_dynamic_flag_spec= -whole_archive_flag_spec= -thread_safe_flag_spec= -hardcode_into_libs=no -hardcode_libdir_flag_spec= -hardcode_libdir_separator= -hardcode_direct=no -hardcode_minus_L=no -hardcode_shlibpath_var=unsupported -runpath_var= -link_all_deplibs=unknown -always_export_symbols=no -export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | sed '\''s/.* //'\'' | sort | uniq > $export_symbols' -# include_expsyms should be a list of space-separated symbols to be *always* -# included in the symbol list -include_expsyms= -# exclude_expsyms can be an egrep regular expression of symbols to exclude -# it will be wrapped by ` (' and `)$', so one must not match beginning or -# end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', -# as well as any symbol that contains `d'. -exclude_expsyms="_GLOBAL_OFFSET_TABLE_" -# Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out -# platforms (ab)use it in PIC code, but their linkers get confused if -# the symbol is explicitly referenced. Since portable code cannot -# rely on this symbol name, it's probably fine to never include it in -# preloaded symbol tables. -extract_expsyms_cmds= +# +# Check to make sure the static flag actually works. +# +AC_LIBTOOL_LINKER_OPTION([if $compiler static flag $_LT_AC_TAGVAR(lt_prog_compiler_static, $1) works], + _LT_AC_TAGVAR(lt_prog_compiler_static_works, $1), + $_LT_AC_TAGVAR(lt_prog_compiler_static, $1), + [], + [_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=]) + + +AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1) +AC_LIBTOOL_PROG_COMPILER_PIC($1) +AC_LIBTOOL_PROG_CC_C_O($1) +AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1) +AC_LIBTOOL_PROG_LD_SHLIBS($1) +AC_LIBTOOL_SYS_DYNAMIC_LINKER($1) +AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1) +AC_LIBTOOL_SYS_LIB_STRIP +AC_LIBTOOL_DLOPEN_SELF($1) -case $host_os in -cygwin* | mingw* | pw32*) - # FIXME: the MSVC++ port hasn't been tested in a loooong time - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - if test "$GCC" != yes; then - with_gnu_ld=no +# Report which librarie types wil actually be built +AC_MSG_CHECKING([if libtool supports shared libraries]) +AC_MSG_RESULT([$can_build_shared]) + +AC_MSG_CHECKING([whether to build shared libraries]) +test "$can_build_shared" = "no" && enable_shared=no + +# On AIX, shared libraries and static libraries use the same namespace, and +# are all built from PIC. +case "$host_os" in +aix3*) + test "$enable_shared" = yes && enable_static=no + if test -n "$RANLIB"; then + archive_cmds="$archive_cmds~\$RANLIB \$lib" + postinstall_cmds='$RANLIB $lib' fi ;; -openbsd*) - with_gnu_ld=no + +aix4* | aix5*) + if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then + test "$enable_shared" = yes && enable_static=no + fi ;; + darwin* | rhapsody*) + if test "$GCC" = yes; then + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no + case "$host_os" in + rhapsody* | darwin1.[[012]]) + _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined suppress' + ;; + *) # Darwin 1.3 on + if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then + _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress' + else + case ${MACOSX_DEPLOYMENT_TARGET} in + 10.[[012]]) + _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress' + ;; + 10.*) + _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined dynamic_lookup' + ;; + esac + fi + ;; + esac + output_verbose_link_cmd='echo' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags -install_name $rpath/$soname $verstring' + _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' + # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + _LT_AC_TAGVAR(hardcode_direct, $1)=no + _LT_AC_TAGVAR(hardcode_automatic, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience' + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + else + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; esac +AC_MSG_RESULT([$enable_shared]) -ld_shlibs=yes -if test "$with_gnu_ld" = yes; then - # If archive_cmds runs LD, not CC, wlarc should be empty - wlarc='${wl}' - - # See if GNU ld supports shared libraries. - case $host_os in - aix3* | aix4* | aix5*) - # On AIX, the GNU linker is very broken - # Note:Check GNU linker on AIX 5-IA64 when/if it becomes available. - ld_shlibs=no - cat <&2 +AC_MSG_CHECKING([whether to build static libraries]) +# Make sure either enable_shared or enable_static is yes. +test "$enable_shared" = yes || enable_static=yes +AC_MSG_RESULT([$enable_static]) -*** Warning: the GNU linker, at least up to release 2.9.1, is reported -*** to be unable to reliably create shared libraries on AIX. -*** Therefore, libtool is disabling shared libraries support. If you -*** really care for shared libraries, you may want to modify your PATH -*** so that a non-GNU linker is found, and then restart. +AC_LIBTOOL_CONFIG($1) -EOF - ;; +AC_LANG_POP +CC="$lt_save_CC" +])# AC_LIBTOOL_LANG_C_CONFIG - amigaos*) - archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - - # Samuel A. Falvo II reports - # that the semantics of dynamic libraries on AmigaOS, at least up - # to version 4, is to share data among multiple programs linked - # with the same dynamic library. Since this doesn't match the - # behavior of shared libraries on other platforms, we can use - # them. - ld_shlibs=no - ;; - beos*) - if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then - allow_undefined_flag=unsupported - # Joseph Beckenbach says some releases of gcc - # support --undefined. This deserves some investigation. FIXME - archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - else - ld_shlibs=no - fi - ;; +# AC_LIBTOOL_LANG_CXX_CONFIG +# -------------------------- +# Ensure that the configuration vars for the C compiler are +# suitably defined. Those variables are subsequently used by +# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. +AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG], [_LT_AC_LANG_CXX_CONFIG(CXX)]) +AC_DEFUN([_LT_AC_LANG_CXX_CONFIG], +[AC_LANG_PUSH(C++) +AC_REQUIRE([AC_PROG_CXX]) +AC_REQUIRE([AC_PROG_CXXCPP]) + +_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no +_LT_AC_TAGVAR(allow_undefined_flag, $1)= +_LT_AC_TAGVAR(always_export_symbols, $1)=no +_LT_AC_TAGVAR(archive_expsym_cmds, $1)= +_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)= +_LT_AC_TAGVAR(hardcode_direct, $1)=no +_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= +_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= +_LT_AC_TAGVAR(hardcode_libdir_separator, $1)= +_LT_AC_TAGVAR(hardcode_minus_L, $1)=no +_LT_AC_TAGVAR(hardcode_automatic, $1)=no +_LT_AC_TAGVAR(module_cmds, $1)= +_LT_AC_TAGVAR(module_expsym_cmds, $1)= +_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown +_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds +_LT_AC_TAGVAR(no_undefined_flag, $1)= +_LT_AC_TAGVAR(whole_archive_flag_spec, $1)= +_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no + +# Dependencies to place before and after the object being linked: +_LT_AC_TAGVAR(predep_objects, $1)= +_LT_AC_TAGVAR(postdep_objects, $1)= +_LT_AC_TAGVAR(predeps, $1)= +_LT_AC_TAGVAR(postdeps, $1)= +_LT_AC_TAGVAR(compiler_lib_search_path, $1)= + +# Source file extension for C++ test sources. +ac_ext=cc + +# Object file extension for compiled C++ test sources. +objext=o +_LT_AC_TAGVAR(objext, $1)=$objext - cygwin* | mingw* | pw32*) - # hardcode_libdir_flag_spec is actually meaningless, as there is - # no search path for DLLs. - hardcode_libdir_flag_spec='-L$libdir' - allow_undefined_flag=unsupported - always_export_symbols=yes - - extract_expsyms_cmds='test -f $output_objdir/impgen.c || \ - sed -e "/^# \/\* impgen\.c starts here \*\//,/^# \/\* impgen.c ends here \*\// { s/^# //;s/^# *$//; p; }" -e d < $''0 > $output_objdir/impgen.c~ - test -f $output_objdir/impgen.exe || (cd $output_objdir && \ - if test "x$HOST_CC" != "x" ; then $HOST_CC -o impgen impgen.c ; \ - else $CC -o impgen impgen.c ; fi)~ - $output_objdir/impgen $dir/$soroot > $output_objdir/$soname-def' - - old_archive_from_expsyms_cmds='$DLLTOOL --as=$AS --dllname $soname --def $output_objdir/$soname-def --output-lib $output_objdir/$newlib' - - # cygwin and mingw dlls have different entry points and sets of symbols - # to exclude. - # FIXME: what about values for MSVC? - dll_entry=__cygwin_dll_entry@12 - dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12~ - case $host_os in - mingw*) - # mingw values - dll_entry=_DllMainCRTStartup@12 - dll_exclude_symbols=DllMain@12,DllMainCRTStartup@12,DllEntryPoint@12~ - ;; - esac +# Code to be used in simple compile tests +lt_simple_compile_test_code="int some_variable = 0;\n" - # mingw and cygwin differ, and it's simplest to just exclude the union - # of the two symbol sets. - dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12,DllMainCRTStartup@12,DllEntryPoint@12 - - # recent cygwin and mingw systems supply a stub DllMain which the user - # can override, but on older systems we have to supply one (in ltdll.c) - if test "x$lt_cv_need_dllmain" = "xyes"; then - ltdll_obj='$output_objdir/$soname-ltdll.'"$ac_objext " - ltdll_cmds='test -f $output_objdir/$soname-ltdll.c || sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < $''0 > $output_objdir/$soname-ltdll.c~ - test -f $output_objdir/$soname-ltdll.$ac_objext || (cd $output_objdir && $CC -c $soname-ltdll.c)~' - else - ltdll_obj= - ltdll_cmds= - fi +# Code to be used in simple link tests +lt_simple_link_test_code='int main(int, char *[]) { return(0); }\n' - # Extract the symbol export list from an `--export-all' def file, - # then regenerate the def file from the symbol export list, so that - # the compiled dll only exports the symbol export list. - # Be careful not to strip the DATA tag left be newer dlltools. - export_symbols_cmds="$ltdll_cmds"' - $DLLTOOL --export-all --exclude-symbols '$dll_exclude_symbols' --output-def $output_objdir/$soname-def '$ltdll_obj'$libobjs $convenience~ - sed -e "1,/EXPORTS/d" -e "s/ @ [[0-9]]*//" -e "s/ *;.*$//" < $output_objdir/$soname-def > $export_symbols' - - # If the export-symbols file already is a .def file (1st line - # is EXPORTS), use it as is. - # If DATA tags from a recent dlltool are present, honour them! - archive_expsym_cmds='if test "x`head -1 $export_symbols`" = xEXPORTS; then - cp $export_symbols $output_objdir/$soname-def; - else - echo EXPORTS > $output_objdir/$soname-def; - _lt_hint=1; - cat $export_symbols | while read symbol; do - set dummy \$symbol; - case \[$]# in - 2) echo " \[$]2 @ \$_lt_hint ; " >> $output_objdir/$soname-def;; - *) echo " \[$]2 @ \$_lt_hint \[$]3 ; " >> $output_objdir/$soname-def;; - esac; - _lt_hint=`expr 1 + \$_lt_hint`; - done; - fi~ - '"$ltdll_cmds"' - $CC -Wl,--base-file,$output_objdir/$soname-base '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~ - $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp~ - $CC -Wl,--base-file,$output_objdir/$soname-base $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~ - $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp --output-lib $output_objdir/$libname.dll.a~ - $CC $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags' - ;; +# ltmain only uses $CC for tagged configurations so make sure $CC is set. +_LT_AC_SYS_COMPILER - netbsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' - wlarc= - else - archive_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - fi - ;; +# Allow CC to be a program name with arguments. +lt_save_CC=$CC +lt_save_LD=$LD +lt_save_GCC=$GCC +GCC=$GXX +lt_save_with_gnu_ld=$with_gnu_ld +lt_save_path_LD=$lt_cv_path_LD +if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then + lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx +else + unset lt_cv_prog_gnu_ld +fi +if test -n "${lt_cv_path_LDCXX+set}"; then + lt_cv_path_LD=$lt_cv_path_LDCXX +else + unset lt_cv_path_LD +fi +test -z "${LDCXX+set}" || LD=$LDCXX +CC=${CXX-"c++"} +compiler=$CC +_LT_AC_TAGVAR(compiler, $1)=$CC +cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'` + +# We don't want -fno-exception wen compiling C++ code, so set the +# no_builtin_flag separately +if test "$GXX" = yes; then + _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' +else + _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= +fi - solaris* | sysv5*) - if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then - ld_shlibs=no - cat <&2 +if test "$GXX" = yes; then + # Set up default GNU C++ configuration -*** Warning: The releases 2.8.* of the GNU linker cannot reliably -*** create shared libraries on Solaris systems. Therefore, libtool -*** is disabling shared libraries support. We urge you to upgrade GNU -*** binutils to release 2.9.1 or newer. Another option is to modify -*** your PATH or compiler configuration so that the native linker is -*** used, and then restart. + AC_PROG_LD -EOF - elif $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - ld_shlibs=no - fi - ;; + # Check if GNU C++ uses GNU ld as the underlying linker, since the + # archiving commands below assume that GNU ld is being used. + if test "$with_gnu_ld" = yes; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - sunos4*) - archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' - wlarc= - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' - *) - if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + # If archive_cmds runs LD, not CC, wlarc should be empty + # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to + # investigate it a little bit more. (MM) + wlarc='${wl}' + + # ancient GNU ld didn't support --whole-archive et. al. + if eval "`$CC -print-prog-name=ld` --help 2>&1" | \ + grep 'no-whole-archive' > /dev/null; then + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' else - ld_shlibs=no + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= fi - ;; - esac + else + with_gnu_ld=no + wlarc= - if test "$ld_shlibs" = yes; then - runpath_var=LD_RUN_PATH - hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir' - export_dynamic_flag_spec='${wl}--export-dynamic' - case $host_os in - cygwin* | mingw* | pw32*) - # dlltool doesn't understand --whole-archive et. al. - whole_archive_flag_spec= - ;; - *) - # ancient GNU ld didn't support --whole-archive et. al. - if $LD --help 2>&1 | egrep 'no-whole-archive' > /dev/null; then - whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' - else - whole_archive_flag_spec= - fi - ;; - esac + # A generic and very simple default shared library creation + # command for GNU C++ for the case where it uses the native + # linker, instead of GNU ld. If possible, this setting should + # overridden to take advantage of the native linker features on + # the platform it is being used on. + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' fi + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' + else - # PORTME fill in a description of your system's linker (not GNU ld) - case $host_os in + GXX=no + with_gnu_ld=no + wlarc= +fi + +# PORTME: fill in a description of your system's C++ link characteristics +AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) +_LT_AC_TAGVAR(ld_shlibs, $1)=yes +case $host_os in aix3*) - allow_undefined_flag=unsupported - always_export_symbols=yes - archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' - # Note: this linker hardcodes the directories in LIBPATH if there - # are no directories specified by -L. - hardcode_minus_L=yes - if test "$GCC" = yes && test -z "$link_static_flag"; then - # Neither direct hardcoding nor static linking is supported with a - # broken collect2. - hardcode_direct=unsupported - fi + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; - aix4* | aix5*) if test "$host_cpu" = ia64; then # On IA64, the linker does run time linking by default, so we don't @@ -2250,10 +3705,12 @@ # need to do runtime linking. case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*) for ld_flag in $LDFLAGS; do - if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then + case $ld_flag in + *-brtl*) aix_use_runtimelinking=yes break - fi + ;; + esac done esac @@ -2267,34 +3724,39 @@ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. - hardcode_direct=yes - archive_cmds='' - hardcode_libdir_separator=':' - if test "$GCC" = yes; then - case $host_os in aix4.[[012]]|aix4.[[012]].*) + _LT_AC_TAGVAR(archive_cmds, $1)='' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':' + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + + if test "$GXX" = yes; then + case $host_os in aix4.[012]|aix4.[012].*) + # We only want to do this on AIX 4.2 and lower, the check + # below for broken collect2 doesn't work under 4.3+ collect2name=`${CC} -print-prog-name=collect2` if test -f "$collect2name" && \ - strings "$collect2name" | grep resolve_lib_name >/dev/null + strings "$collect2name" | grep resolve_lib_name >/dev/null then # We have reworked collect2 - hardcode_direct=yes + _LT_AC_TAGVAR(hardcode_direct, $1)=yes else # We have old collect2 - hardcode_direct=unsupported + _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported # It fails to find uninstalled libraries when the uninstalled # path is not listed in the libpath. Setting hardcode_minus_L # to unsupported forces relinking - hardcode_minus_L=yes - hardcode_libdir_flag_spec='-L$libdir' - hardcode_libdir_separator= + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= fi esac - shared_flag='-shared' else # not using gcc if test "$host_cpu" = ia64; then - shared_flag='${wl}-G' + # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release + # chokes on -Wl,-G. The following line is correct: + shared_flag='-G' else if test "$aix_use_runtimelinking" = yes; then shared_flag='${wl}-G' @@ -2304,794 +3766,867 @@ fi fi - # It seems that -bexpall can do strange things, so it is better to - # generate a list of symbols to export. - always_export_symbols=yes + # It seems that -bexpall does not export symbols beginning with + # underscore (_), so it is better to generate a list of symbols to export. + _LT_AC_TAGVAR(always_export_symbols, $1)=yes if test "$aix_use_runtimelinking" = yes; then # Warning - without using the other runtime loading flags (-brtl), # -berok will link without error, but may produce a broken library. - allow_undefined_flag='-berok' - hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:/usr/lib:/lib' - archive_expsym_cmds="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag" - else + _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok' + # Determine the default libpath from the value encoded in an empty executable. + _LT_AC_SYS_LIBPATH_AIX + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" + + _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag" + else if test "$host_cpu" = ia64; then - hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' - allow_undefined_flag="-z nodefs" - archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname ${wl}-h$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' + _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs" + _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" else - hardcode_libdir_flag_spec='${wl}-bnolibpath ${wl}-blibpath:$libdir:/usr/lib:/lib' + # Determine the default libpath from the value encoded in an empty executable. + _LT_AC_SYS_LIBPATH_AIX + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" # Warning - without using the other run time loading flags, # -berok will link without error, but may produce a broken library. - allow_undefined_flag='${wl}-berok' - # This is a bit strange, but is similar to how AIX traditionally builds - # it's shared libraries. - archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"' ~$AR -crlo $objdir/$libname$release.a $objdir/$soname' + _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' + # -bexpall does not export symbols beginning with underscore (_) + _LT_AC_TAGVAR(always_export_symbols, $1)=yes + # Exported symbols can be pulled into shared objects from archives + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' ' + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes + # This is similar to how AIX traditionally builds it's shared libraries. + _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' fi fi ;; - - amigaos*) - archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - # see comment about different semantics on the GNU ld section - ld_shlibs=no + chorus*) + case $cc_basename in + *) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + esac ;; cygwin* | mingw* | pw32*) - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - # hardcode_libdir_flag_spec is actually meaningless, as there is - # no search path for DLLs. - hardcode_libdir_flag_spec=' ' - allow_undefined_flag=unsupported - # Tell ltmain to make .lib files, not .a files. - libext=lib - # FIXME: Setting linknames here is a bad hack. - archive_cmds='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | sed -e '\''s/ -lc$//'\''` -link -dll~linknames=' - # The linker will automatically build a .lib file if we build a DLL. - old_archive_from_new_cmds='true' - # FIXME: Should let the user specify the lib program. - old_archive_cmds='lib /OUT:$oldlib$oldobjs$old_deplibs' - fix_srcfile_path='`cygpath -w "$srcfile"`' - ;; + # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, + # as there is no search path for DLLs. + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_AC_TAGVAR(always_export_symbols, $1)=no + _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + + if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' + # If the export-symbols file already is a .def file (1st line + # is EXPORTS), use it as is; otherwise, prepend... + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then + cp $export_symbols $output_objdir/$soname.def; + else + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ + $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' + else + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; darwin* | rhapsody*) + if test "$GXX" = yes; then + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no case "$host_os" in rhapsody* | darwin1.[[012]]) - allow_undefined_flag='-undefined suppress' + _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined suppress' ;; *) # Darwin 1.3 on - allow_undefined_flag='-flat_namespace -undefined suppress' + if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then + _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress' + else + case ${MACOSX_DEPLOYMENT_TARGET} in + 10.[[012]]) + _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress' + ;; + 10.*) + _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined dynamic_lookup' + ;; + esac + fi ;; esac - # FIXME: Relying on posixy $() will cause problems for - # cross-compilation, but unfortunately the echo tests do not - # yet detect zsh echo's removal of \ escapes. - archive_cmds='$nonopt $(test "x$module" = xyes && echo -bundle || echo -dynamiclib) $allow_undefined_flag -o $lib $libobjs $deplibs$linker_flags -install_name $rpath/$soname $verstring' - # We need to add '_' to the symbols in $export_symbols first - #archive_expsym_cmds="$archive_cmds"' && strip -s $export_symbols' - hardcode_direct=yes - hardcode_shlibpath_var=no - whole_archive_flag_spec='-all_load $convenience' - ;; - - freebsd1*) - ld_shlibs=no - ;; - - # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor - # support. Future versions do this automatically, but an explicit c++rt0.o - # does not break anything, and helps significantly (at the cost of a little - # extra space). - freebsd2.2*) - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - - # Unfortunately, older versions of FreeBSD 2 do not have this feature. - freebsd2*) - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=yes - hardcode_minus_L=yes - hardcode_shlibpath_var=no - ;; - - # FreeBSD 3 and greater uses gcc -shared to do shared libraries. - freebsd*) - archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - - hpux9* | hpux10* | hpux11*) - case $host_os in - hpux9*) archive_cmds='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ;; - *) archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' ;; - esac - hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' - hardcode_libdir_separator=: - hardcode_direct=yes - hardcode_minus_L=yes # Not in the search PATH, but as the default - # location of the library. - export_dynamic_flag_spec='${wl}-E' - ;; - - irix5* | irix6*) - if test "$GCC" = yes; then - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + lt_int_apple_cc_single_mod=no + output_verbose_link_cmd='echo' + if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then + lt_int_apple_cc_single_mod=yes + fi + if test "X$lt_int_apple_cc_single_mod" = Xyes ; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring' else - archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring' fi - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator=: - link_all_deplibs=yes - ;; + _LT_AC_TAGVAR(module_cmds, $1)='$CC ${wl}-bind_at_load $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' - netbsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out + # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's + if test "X$lt_int_apple_cc_single_mod" = Xyes ; then + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' else - archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' fi - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - hardcode_shlibpath_var=no + _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + _LT_AC_TAGVAR(hardcode_direct, $1)=no + _LT_AC_TAGVAR(hardcode_automatic, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience' + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + else + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi ;; - newsos6) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=yes - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator=: - hardcode_shlibpath_var=no + dgux*) + case $cc_basename in + ec++) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + ghcx) + # Green Hills C++ Compiler + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + esac ;; - - openbsd*) - hardcode_direct=yes - hardcode_shlibpath_var=no - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec='${wl}-rpath,$libdir' - export_dynamic_flag_spec='${wl}-E' - else - case "$host_os" in - openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*) - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec='-R$libdir' + freebsd[12]*) + # C++ shared libraries reported to be fairly broken before switch to ELF + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + freebsd-elf*) + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no + ;; + freebsd* | kfreebsd*-gnu) + # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF + # conventions + _LT_AC_TAGVAR(ld_shlibs, $1)=yes + ;; + gnu*) + ;; + hpux9*) + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, + # but as the default + # location of the library. + + case $cc_basename in + CC) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + aCC) + _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "[-]L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + ;; + *) + if test "$GXX" = yes; then + _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + else + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + ;; + hpux10*|hpux11*) + if test $with_gnu_ld = no; then + case "$host_cpu" in + hppa*64*) + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + ;; + ia64*) + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' ;; *) - archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec='${wl}-rpath,$libdir' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' ;; esac fi - ;; - - os2*) - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - allow_undefined_flag=unsupported - archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' - old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' - ;; - - osf3*) - if test "$GCC" = yes; then - allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - else - allow_undefined_flag=' -expect_unresolved \*' - archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - fi - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator=: - ;; - - osf4* | osf5*) # as osf3* with the addition of -msym flag - if test "$GCC" = yes; then - allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - else - allow_undefined_flag=' -expect_unresolved \*' - archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - archive_expsym_cmds='for i in `cat $export_symbols`; do printf "-exported_symbol " >> $lib.exp; echo "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ - $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp' - - #Both c and cxx compiler support -rpath directly - hardcode_libdir_flag_spec='-rpath $libdir' - fi - hardcode_libdir_separator=: - ;; - - sco3.2v5*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_shlibpath_var=no - runpath_var=LD_RUN_PATH - hardcode_runpath_var=yes - export_dynamic_flag_spec='${wl}-Bexport' - ;; - - solaris*) - # gcc --version < 3.0 without binutils cannot create self contained - # shared libraries reliably, requiring libgcc.a to resolve some of - # the object symbols generated in some cases. Libraries that use - # assert need libgcc.a to resolve __eprintf, for example. Linking - # a copy of libgcc.a into every shared library to guarantee resolving - # such symbols causes other problems: According to Tim Van Holder - # , C++ libraries end up with a separate - # (to the application) exception stack for one thing. - no_undefined_flag=' -z defs' - if test "$GCC" = yes; then - case `$CC --version 2>/dev/null` in - [[12]].*) - cat <&2 - -*** Warning: Releases of GCC earlier than version 3.0 cannot reliably -*** create self contained shared libraries on Solaris systems, without -*** introducing a dependency on libgcc.a. Therefore, libtool is disabling -*** -no-undefined support, which will at least allow you to build shared -*** libraries. However, you may find that when you link such libraries -*** into an application without using GCC, you have to manually add -*** \`gcc --print-libgcc-file-name\` to the link command. We urge you to -*** upgrade to a newer version of GCC. Another option is to rebuild your -*** current GCC to use the GNU linker from GNU binutils 2.9.1 or newer. + case "$host_cpu" in + hppa*64*) + _LT_AC_TAGVAR(hardcode_direct, $1)=no + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + ia64*) + _LT_AC_TAGVAR(hardcode_direct, $1)=no + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, + # but as the default + # location of the library. + ;; + *) + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, + # but as the default + # location of the library. + ;; + esac -EOF - no_undefined_flag= + case $cc_basename in + CC) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + aCC) + case "$host_cpu" in + hppa*64*|ia64*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs' + ;; + *) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + esac + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + ;; + *) + if test "$GXX" = yes; then + if test $with_gnu_ld = no; then + case "$host_cpu" in + ia64*|hppa*64*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs' + ;; + *) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + esac + fi + else + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi ;; - esac - fi - # $CC -shared without GNU ld will not create a library from C++ - # object files and a static libstdc++, better avoid it by now - archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' - archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' - hardcode_libdir_flag_spec='-R$libdir' - hardcode_shlibpath_var=no - case $host_os in - solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; - *) # Supported since Solaris 2.6 (maybe 2.5.1?) - whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ;; esac - link_all_deplibs=yes - ;; - - sunos4*) - if test "x$host_vendor" = xsequent; then - # Use $CC to link under sequent, because it throws in some extra .o - # files that make .init and .fini sections work. - archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' - fi - hardcode_libdir_flag_spec='-L$libdir' - hardcode_direct=yes - hardcode_minus_L=yes - hardcode_shlibpath_var=no - ;; - - sysv4) - if test "x$host_vendor" = xsno; then - archive_cmds='$LD -G -Bsymbolic -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=yes # is this really true??? - else - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=no #Motorola manual says yes, but my tests say they lie - fi - runpath_var='LD_RUN_PATH' - hardcode_shlibpath_var=no - ;; - - sysv4.3*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_shlibpath_var=no - export_dynamic_flag_spec='-Bexport' - ;; - - sysv5*) - no_undefined_flag=' -z text' - # $CC -shared without GNU ld will not create a library from C++ - # object files and a static libstdc++, better avoid it by now - archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' - archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' - hardcode_libdir_flag_spec= - hardcode_shlibpath_var=no - runpath_var='LD_RUN_PATH' - ;; - - uts4*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_shlibpath_var=no ;; - - dgux*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_shlibpath_var=no + irix5* | irix6*) + case $cc_basename in + CC) + # SGI C++ + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib' + + # Archives containing C++ object files must be created using + # "CC -ar", where "CC" is the IRIX C++ compiler. This is + # necessary to make sure instantiated templates are included + # in the archive. + _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs' + ;; + *) + if test "$GXX" = yes; then + if test "$with_gnu_ld" = no; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib' + else + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib' + fi + fi + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + ;; + esac + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: ;; - - sysv4*MP*) - if test -d /usr/nec; then - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_shlibpath_var=no - runpath_var=LD_RUN_PATH - hardcode_runpath_var=yes - ld_shlibs=yes - fi + linux*) + case $cc_basename in + KCC) + # Kuck and Associates, Inc. (KAI) C++ Compiler + + # KCC will only create a shared library if the output file + # ends with ".so" (or ".sl" for HP-UX), so rename the library + # to its proper name (with version) after linking. + _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib' + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | grep "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath,$libdir' + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + + # Archives containing C++ object files must be created using + # "CC -Bstatic", where "CC" is the KAI C++ compiler. + _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' + ;; + icpc) + # Intel C++ + with_gnu_ld=yes + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' + ;; + cxx) + # Compaq C++ + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols' + + runpath_var=LD_RUN_PATH + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + ;; + esac ;; - - sysv4.2uw2*) - archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=yes - hardcode_minus_L=no - hardcode_shlibpath_var=no - hardcode_runpath_var=yes - runpath_var=LD_RUN_PATH + lynxos*) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + m88k*) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + mvs*) + case $cc_basename in + cxx) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + esac ;; - - sysv5uw7* | unixware7*) - no_undefined_flag='${wl}-z ${wl}text' - if test "$GCC" = yes; then - archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + netbsd* | knetbsd*-gnu) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' + wlarc= + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no fi - runpath_var='LD_RUN_PATH' - hardcode_shlibpath_var=no - ;; - - *) - ld_shlibs=no + # Workaround some broken pre-1.5 toolchains + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"' ;; - esac -fi -AC_MSG_RESULT([$ld_shlibs]) -test "$ld_shlibs" = no && can_build_shared=no - -# Check hardcoding attributes. -AC_MSG_CHECKING([how to hardcode library paths into programs]) -hardcode_action= -if test -n "$hardcode_libdir_flag_spec" || \ - test -n "$runpath_var"; then - - # We can hardcode non-existant directories. - if test "$hardcode_direct" != no && - # If the only mechanism to avoid hardcoding is shlibpath_var, we - # have to relink, otherwise we might link with an installed library - # when we should be linking with a yet-to-be-installed one - ## test "$hardcode_shlibpath_var" != no && - test "$hardcode_minus_L" != no; then - # Linking always hardcodes the temporary library directory. - hardcode_action=relink - else - # We can link without hardcoding, and we can hardcode nonexisting dirs. - hardcode_action=immediate - fi -else - # We cannot hardcode anything, or else we can only hardcode existing - # directories. - hardcode_action=unsupported -fi -AC_MSG_RESULT([$hardcode_action]) - -striplib= -old_striplib= -AC_MSG_CHECKING([whether stripping libraries is possible]) -if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then - test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" - test -z "$striplib" && striplib="$STRIP --strip-unneeded" - AC_MSG_RESULT([yes]) -else - AC_MSG_RESULT([no]) -fi - -reload_cmds='$LD$reload_flag -o $output$reload_objs' -test -z "$deplibs_check_method" && deplibs_check_method=unknown - -# PORTME Fill in your ld.so characteristics -AC_MSG_CHECKING([dynamic linker characteristics]) -library_names_spec= -libname_spec='lib$name' -soname_spec= -postinstall_cmds= -postuninstall_cmds= -finish_cmds= -finish_eval= -shlibpath_var= -shlibpath_overrides_runpath=unknown -version_type=none -dynamic_linker="$host_os ld.so" -sys_lib_dlsearch_path_spec="/lib /usr/lib" -sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" - -case $host_os in -aix3*) - version_type=linux - library_names_spec='${libname}${release}.so$versuffix $libname.a' - shlibpath_var=LIBPATH + osf3*) + case $cc_basename in + KCC) + # Kuck and Associates, Inc. (KAI) C++ Compiler + + # KCC will only create a shared library if the output file + # ends with ".so" (or ".sl" for HP-UX), so rename the library + # to its proper name (with version) after linking. + _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + + # Archives containing C++ object files must be created using + # "CC -Bstatic", where "CC" is the KAI C++ compiler. + _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' - # AIX has no versioning support, so we append a major version to the name. - soname_spec='${libname}${release}.so$major' - ;; + ;; + RCC) + # Rational C++ 2.4.1 + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + cxx) + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${objdir}/so_locations -o $lib' + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + ;; + *) + if test "$GXX" = yes && test "$with_gnu_ld" = no; then + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib' + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' -aix4* | aix5*) - version_type=linux - if test "$host_cpu" = ia64; then - # AIX 5 supports IA64 - library_names_spec='${libname}${release}.so$major ${libname}${release}.so$versuffix $libname.so' - shlibpath_var=LD_LIBRARY_PATH - else - # With GCC up to 2.95.x, collect2 would create an import file - # for dependence libraries. The import file would start with - # the line `#! .'. This would cause the generated library to - # depend on `.', always an invalid library. This was fixed in - # development snapshots of GCC prior to 3.0. - case $host_os in - aix4 | aix4.[[01]] | aix4.[[01]].*) - if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' - echo ' yes ' - echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then - : else - can_build_shared=no + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no fi - ;; - esac - # AIX (on Power*) has no versioning support, so currently we can - # not hardcode correct soname into executable. Probably we can - # add versioning support to collect2, so additional links can - # be useful in future. - if test "$aix_use_runtimelinking" = yes; then - # If using run time linking (on AIX 4.2 or later) use lib.so - # instead of lib.a to let people know that these are not - # typical AIX shared libraries. - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - else - # We preserve .a as extension for shared libraries through AIX4.2 - # and later when we are not doing run time linking. - library_names_spec='${libname}${release}.a $libname.a' - soname_spec='${libname}${release}.so$major' - fi - shlibpath_var=LIBPATH - fi - ;; - -amigaos*) - library_names_spec='$libname.ixlibrary $libname.a' - # Create ${libname}_ixlibrary.a entries in /sys/libs. - finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done' - ;; - -beos*) - library_names_spec='${libname}.so' - dynamic_linker="$host_os ld.so" - shlibpath_var=LIBRARY_PATH - ;; - -bsdi4*) - version_type=linux - need_version=no - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" - sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" - export_dynamic_flag_spec=-rdynamic - # the default ld.so.conf also contains /usr/contrib/lib and - # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow - # libtool to hard-code these into programs - ;; - -cygwin* | mingw* | pw32*) - version_type=windows - need_version=no - need_lib_prefix=no - case $GCC,$host_os in - yes,cygwin*) - library_names_spec='$libname.dll.a' - soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | sed -e 's/[[.]]/-/g'`${versuffix}.dll' - postinstall_cmds='dlpath=`bash 2>&1 -c '\''. $dir/${file}i;echo \$dlname'\''`~ - dldir=$destdir/`dirname \$dlpath`~ - test -d \$dldir || mkdir -p \$dldir~ - $install_prog .libs/$dlname \$dldir/$dlname' - postuninstall_cmds='dldll=`bash 2>&1 -c '\''. $file; echo \$dlname'\''`~ - dlpath=$dir/\$dldll~ - $rm \$dlpath' + ;; + esac ;; - yes,mingw*) - library_names_spec='${libname}`echo ${release} | sed -e 's/[[.]]/-/g'`${versuffix}.dll' - sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | sed -e "s/^libraries://" -e "s/;/ /g"` + osf4* | osf5*) + case $cc_basename in + KCC) + # Kuck and Associates, Inc. (KAI) C++ Compiler + + # KCC will only create a shared library if the output file + # ends with ".so" (or ".sl" for HP-UX), so rename the library + # to its proper name (with version) after linking. + _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + + # Archives containing C++ object files must be created using + # the KAI C++ compiler. + _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' + ;; + RCC) + # Rational C++ 2.4.1 + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + cxx) + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ + echo "-hidden">> $lib.exp~ + $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp `test -n "$verstring" && echo -set_version $verstring` -update_registry $objdir/so_locations -o $lib~ + $rm $lib.exp' + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + ;; + *) + if test "$GXX" = yes && test "$with_gnu_ld" = no; then + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib' + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' + + else + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac ;; - yes,pw32*) - library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll' + psos*) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + sco*) + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no + case $cc_basename in + CC) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + esac ;; - *) - library_names_spec='${libname}`echo ${release} | sed -e 's/[[.]]/-/g'`${versuffix}.dll $libname.lib' + sunos4*) + case $cc_basename in + CC) + # Sun C++ 4.x + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + lcc) + # Lucid + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + esac ;; - esac - dynamic_linker='Win32 ld.exe' - # FIXME: first we should search . and the directory the executable is in - shlibpath_var=PATH - ;; + solaris*) + case $cc_basename in + CC) + # Sun C++ 4.2, 5.x and Centerline C++ + _LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -nolib -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $CC -G${allow_undefined_flag} -nolib ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + case $host_os in + solaris2.[0-5] | solaris2.[0-5].*) ;; + *) + # The C++ compiler is used as linker so we must use $wl + # flag to pass the commands to the underlying system + # linker. + # Supported since Solaris 2.6 (maybe 2.5.1?) + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' + ;; + esac + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes -darwin* | rhapsody*) - dynamic_linker="$host_os dyld" - version_type=darwin - need_lib_prefix=no - need_version=no - # FIXME: Relying on posixy $() will cause problems for - # cross-compilation, but unfortunately the echo tests do not - # yet detect zsh echo's removal of \ escapes. - library_names_spec='${libname}${release}${versuffix}.$(test .$module = .yes && echo so || echo dylib) ${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib) ${libname}.$(test .$module = .yes && echo so || echo dylib)' - soname_spec='${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib)' - shlibpath_overrides_runpath=yes - shlibpath_var=DYLD_LIBRARY_PATH - ;; + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep "\-[[LR]]"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + + # Archives containing C++ object files must be created using + # "CC -xar", where "CC" is the Sun C++ compiler. This is + # necessary to make sure instantiated templates are included + # in the archive. + _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' + ;; + gcx) + # Green Hills C++ Compiler + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' -freebsd1*) - dynamic_linker=no - ;; + # The C++ compiler must be used to create the archive. + _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs' + ;; + *) + # GNU C++ compiler with Solaris linker + if test "$GXX" = yes && test "$with_gnu_ld" = no; then + _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs' + if $CC --version | grep -v '^2\.7' > /dev/null; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\"" + else + # g++ 2.7 appears to require `-G' NOT `-shared' on this + # platform. + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\"" + fi -freebsd*) - objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout` - version_type=freebsd-$objformat - case $version_type in - freebsd-elf*) - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so' - need_version=no - need_lib_prefix=no - ;; - freebsd-*) - library_names_spec='${libname}${release}.so$versuffix $libname.so$versuffix' - need_version=yes - ;; - esac - shlibpath_var=LD_LIBRARY_PATH - case $host_os in - freebsd2*) - shlibpath_overrides_runpath=yes + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir' + fi + ;; + esac ;; - *) - shlibpath_overrides_runpath=no - hardcode_into_libs=yes + sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7*) + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ;; - esac - ;; - -gnu*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so${major} ${libname}.so' - soname_spec='${libname}${release}.so$major' - shlibpath_var=LD_LIBRARY_PATH - hardcode_into_libs=yes - ;; - -hpux9* | hpux10* | hpux11*) - # Give a soname corresponding to the major version so that dld.sl refuses to - # link against other versions. - dynamic_linker="$host_os dld.sl" - version_type=sunos - need_lib_prefix=no - need_version=no - shlibpath_var=SHLIB_PATH - shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH - library_names_spec='${libname}${release}.sl$versuffix ${libname}${release}.sl$major $libname.sl' - soname_spec='${libname}${release}.sl$major' - # HP-UX runs *really* slowly unless shared libraries are mode 555. - postinstall_cmds='chmod 555 $lib' - ;; - -irix5* | irix6*) - version_type=irix - need_lib_prefix=no - need_version=no - soname_spec='${libname}${release}.so$major' - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so $libname.so' - case $host_os in - irix5*) - libsuff= shlibsuff= + tandem*) + case $cc_basename in + NCC) + # NonStop-UX NCC 3.20 + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + vxworks*) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; *) - case $LD in # libtool.m4 will add one of these switches to LD - *-32|*"-32 ") libsuff= shlibsuff= libmagic=32-bit;; - *-n32|*"-n32 ") libsuff=32 shlibsuff=N32 libmagic=N32;; - *-64|*"-64 ") libsuff=64 shlibsuff=64 libmagic=64-bit;; - *) libsuff= shlibsuff= libmagic=never-match;; - esac + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; - esac - shlibpath_var=LD_LIBRARY${shlibsuff}_PATH - shlibpath_overrides_runpath=no - sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" - sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" - ;; - -# No shared lib support for Linux oldld, aout, or coff. -linux-gnuoldld* | linux-gnuaout* | linux-gnucoff*) - dynamic_linker=no - ;; +esac +AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)]) +test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no -# This must be Linux ELF. -linux-gnu*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - # This implies no fast_install, which is unacceptable. - # Some rework will be needed to allow for fast_install - # before this can be enabled. - hardcode_into_libs=yes +_LT_AC_TAGVAR(GCC, $1)="$GXX" +_LT_AC_TAGVAR(LD, $1)="$LD" - # We used to test for /lib/ld.so.1 and disable shared libraries on - # powerpc, because MkLinux only supported shared libraries with the - # GNU dynamic linker. Since this was broken with cross compilers, - # most powerpc-linux boxes support dynamic linking these days and - # people can always --disable-shared, the test was removed, and we - # assume the GNU/Linux dynamic linker is in use. - dynamic_linker='GNU/Linux ld.so' - ;; +AC_LIBTOOL_POSTDEP_PREDEP($1) +AC_LIBTOOL_PROG_COMPILER_PIC($1) +AC_LIBTOOL_PROG_CC_C_O($1) +AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1) +AC_LIBTOOL_PROG_LD_SHLIBS($1) +AC_LIBTOOL_SYS_DYNAMIC_LINKER($1) +AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1) +AC_LIBTOOL_SYS_LIB_STRIP +AC_LIBTOOL_DLOPEN_SELF($1) + +AC_LIBTOOL_CONFIG($1) + +AC_LANG_POP +CC=$lt_save_CC +LDCXX=$LD +LD=$lt_save_LD +GCC=$lt_save_GCC +with_gnu_ldcxx=$with_gnu_ld +with_gnu_ld=$lt_save_with_gnu_ld +lt_cv_path_LDCXX=$lt_cv_path_LD +lt_cv_path_LD=$lt_save_path_LD +lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld +lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld +])# AC_LIBTOOL_LANG_CXX_CONFIG -netbsd*) - version_type=sunos - need_lib_prefix=no - need_version=no - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - dynamic_linker='NetBSD (a.out) ld.so' - else - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so ${libname}.so' - soname_spec='${libname}${release}.so$major' - dynamic_linker='NetBSD ld.elf_so' - fi - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; +# AC_LIBTOOL_POSTDEP_PREDEP([TAGNAME]) +# ------------------------ +# Figure out "hidden" library dependencies from verbose +# compiler output when linking a shared library. +# Parse the compiler output and extract the necessary +# objects, libraries and library flags. +AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP],[ +dnl we can't use the lt_simple_compile_test_code here, +dnl because it contains code intended for an executable, +dnl not a library. It's possible we should let each +dnl tag define a new lt_????_link_test_code variable, +dnl but it's only used here... +ifelse([$1],[],[cat > conftest.$ac_ext < conftest.$ac_ext < conftest.$ac_ext < conftest.$ac_ext < conftest.$ac_ext - - if AC_TRY_EVAL(ac_compile); then - soname=conftest - lib=conftest - libobjs=conftest.$ac_objext - deplibs= - wl=$lt_cv_prog_cc_wl - compiler_flags=-v - linker_flags=-v - verstring= - output_objdir=. - libname=conftest - save_allow_undefined_flag=$allow_undefined_flag - allow_undefined_flag= - if AC_TRY_EVAL(archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) - then - lt_cv_archive_cmds_need_lc=no - else - lt_cv_archive_cmds_need_lc=yes - fi - allow_undefined_flag=$save_allow_undefined_flag - else - cat conftest.err 1>&5 - fi]) - AC_MSG_RESULT([$lt_cv_archive_cmds_need_lc]) - ;; - esac -fi -need_lc=${lt_cv_archive_cmds_need_lc-yes} -# The second clause should only fire when bootstrapping the +AC_LIBTOOL_CONFIG($1) + +AC_LANG_POP +CC="$lt_save_CC" +])# AC_LIBTOOL_LANG_F77_CONFIG + + +# AC_LIBTOOL_LANG_GCJ_CONFIG +# -------------------------- +# Ensure that the configuration vars for the C compiler are +# suitably defined. Those variables are subsequently used by +# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. +AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG], [_LT_AC_LANG_GCJ_CONFIG(GCJ)]) +AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG], +[AC_LANG_SAVE + +# Source file extension for Java test sources. +ac_ext=java + +# Object file extension for compiled Java test sources. +objext=o +_LT_AC_TAGVAR(objext, $1)=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code="class foo {}\n" + +# Code to be used in simple link tests +lt_simple_link_test_code='public class conftest { public static void main(String[] argv) {}; }\n' + +# ltmain only uses $CC for tagged configurations so make sure $CC is set. +_LT_AC_SYS_COMPILER + +# Allow CC to be a program name with arguments. +lt_save_CC="$CC" +CC=${GCJ-"gcj"} +compiler=$CC +_LT_AC_TAGVAR(compiler, $1)=$CC + +# GCJ did not exist at the time GCC didn't implicitly link libc in. +_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no + +AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1) +AC_LIBTOOL_PROG_COMPILER_PIC($1) +AC_LIBTOOL_PROG_CC_C_O($1) +AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1) +AC_LIBTOOL_PROG_LD_SHLIBS($1) +AC_LIBTOOL_SYS_DYNAMIC_LINKER($1) +AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1) +AC_LIBTOOL_SYS_LIB_STRIP +AC_LIBTOOL_DLOPEN_SELF($1) + +AC_LIBTOOL_CONFIG($1) + +AC_LANG_RESTORE +CC="$lt_save_CC" +])# AC_LIBTOOL_LANG_GCJ_CONFIG + + +# AC_LIBTOOL_LANG_RC_CONFIG +# -------------------------- +# Ensure that the configuration vars for the Windows resource compiler are +# suitably defined. Those variables are subsequently used by +# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. +AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG], [_LT_AC_LANG_RC_CONFIG(RC)]) +AC_DEFUN([_LT_AC_LANG_RC_CONFIG], +[AC_LANG_SAVE + +# Source file extension for RC test sources. +ac_ext=rc + +# Object file extension for compiled RC test sources. +objext=o +_LT_AC_TAGVAR(objext, $1)=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }\n' + +# Code to be used in simple link tests +lt_simple_link_test_code="$lt_simple_compile_test_code" + +# ltmain only uses $CC for tagged configurations so make sure $CC is set. +_LT_AC_SYS_COMPILER + +# Allow CC to be a program name with arguments. +lt_save_CC="$CC" +CC=${RC-"windres"} +compiler=$CC +_LT_AC_TAGVAR(compiler, $1)=$CC +_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes + +AC_LIBTOOL_CONFIG($1) + +AC_LANG_RESTORE +CC="$lt_save_CC" +])# AC_LIBTOOL_LANG_RC_CONFIG + + +# AC_LIBTOOL_CONFIG([TAGNAME]) +# ---------------------------- +# If TAGNAME is not passed, then create an initial libtool script +# with a default configuration from the untagged config vars. Otherwise +# add code to config.status for appending the configuration named by +# TAGNAME from the matching tagged config vars. +AC_DEFUN([AC_LIBTOOL_CONFIG], +[# The else clause should only fire when bootstrapping the # libtool distribution, otherwise you forgot to ship ltmain.sh # with your package, and you will get complaints that there are # no rules to generate ltmain.sh. if test -f "$ltmain"; then - : -else - # If there is no Makefile yet, we rely on a make rule to execute - # `config.status --recheck' to rerun these tests and create the - # libtool script then. - test -f Makefile && make "$ltmain" -fi - -if test -f "$ltmain"; then - trap "$rm \"${ofile}T\"; exit 1" 1 2 15 - $rm -f "${ofile}T" - - echo creating $ofile - + # See if we are running on zsh, and set the options which allow our commands through + # without removal of \ escapes. + if test -n "${ZSH_VERSION+set}" ; then + setopt NO_GLOB_SUBST + fi # Now quote all the things that may contain metacharacters while being # careful not to overquote the AC_SUBSTed values. We take copies of the # variables and quote the copies for generation of the libtool script. - for var in echo old_CC old_CFLAGS \ - AR AR_FLAGS CC LD LN_S NM SHELL \ - reload_flag reload_cmds wl \ - pic_flag link_static_flag no_builtin_flag export_dynamic_flag_spec \ - thread_safe_flag_spec whole_archive_flag_spec libname_spec \ - library_names_spec soname_spec \ - RANLIB old_archive_cmds old_archive_from_new_cmds old_postinstall_cmds \ - old_postuninstall_cmds archive_cmds archive_expsym_cmds postinstall_cmds \ - postuninstall_cmds extract_expsyms_cmds old_archive_from_expsyms_cmds \ - old_striplib striplib file_magic_cmd export_symbols_cmds \ - deplibs_check_method allow_undefined_flag no_undefined_flag \ - finish_cmds finish_eval global_symbol_pipe global_symbol_to_cdecl \ - global_symbol_to_c_name_address \ - hardcode_libdir_flag_spec hardcode_libdir_separator \ + for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC NM \ + SED SHELL STRIP \ + libname_spec library_names_spec soname_spec extract_expsyms_cmds \ + old_striplib striplib file_magic_cmd finish_cmds finish_eval \ + deplibs_check_method reload_flag reload_cmds need_locks \ + lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \ + lt_cv_sys_global_symbol_to_c_name_address \ sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ - compiler_c_o compiler_o_lo need_locks exclude_expsyms include_expsyms; do + old_postinstall_cmds old_postuninstall_cmds \ + _LT_AC_TAGVAR(compiler, $1) \ + _LT_AC_TAGVAR(CC, $1) \ + _LT_AC_TAGVAR(LD, $1) \ + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1) \ + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1) \ + _LT_AC_TAGVAR(lt_prog_compiler_static, $1) \ + _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) \ + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1) \ + _LT_AC_TAGVAR(thread_safe_flag_spec, $1) \ + _LT_AC_TAGVAR(whole_archive_flag_spec, $1) \ + _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1) \ + _LT_AC_TAGVAR(old_archive_cmds, $1) \ + _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) \ + _LT_AC_TAGVAR(predep_objects, $1) \ + _LT_AC_TAGVAR(postdep_objects, $1) \ + _LT_AC_TAGVAR(predeps, $1) \ + _LT_AC_TAGVAR(postdeps, $1) \ + _LT_AC_TAGVAR(compiler_lib_search_path, $1) \ + _LT_AC_TAGVAR(archive_cmds, $1) \ + _LT_AC_TAGVAR(archive_expsym_cmds, $1) \ + _LT_AC_TAGVAR(postinstall_cmds, $1) \ + _LT_AC_TAGVAR(postuninstall_cmds, $1) \ + _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) \ + _LT_AC_TAGVAR(allow_undefined_flag, $1) \ + _LT_AC_TAGVAR(no_undefined_flag, $1) \ + _LT_AC_TAGVAR(export_symbols_cmds, $1) \ + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) \ + _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1) \ + _LT_AC_TAGVAR(hardcode_libdir_separator, $1) \ + _LT_AC_TAGVAR(hardcode_automatic, $1) \ + _LT_AC_TAGVAR(module_cmds, $1) \ + _LT_AC_TAGVAR(module_expsym_cmds, $1) \ + _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1) \ + _LT_AC_TAGVAR(exclude_expsyms, $1) \ + _LT_AC_TAGVAR(include_expsyms, $1); do case $var in - reload_cmds | old_archive_cmds | old_archive_from_new_cmds | \ - old_postinstall_cmds | old_postuninstall_cmds | \ - export_symbols_cmds | archive_cmds | archive_expsym_cmds | \ - extract_expsyms_cmds | old_archive_from_expsyms_cmds | \ + _LT_AC_TAGVAR(old_archive_cmds, $1) | \ + _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) | \ + _LT_AC_TAGVAR(archive_cmds, $1) | \ + _LT_AC_TAGVAR(archive_expsym_cmds, $1) | \ + _LT_AC_TAGVAR(module_cmds, $1) | \ + _LT_AC_TAGVAR(module_expsym_cmds, $1) | \ + _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) | \ + _LT_AC_TAGVAR(export_symbols_cmds, $1) | \ + extract_expsyms_cmds | reload_cmds | finish_cmds | \ postinstall_cmds | postuninstall_cmds | \ - finish_cmds | sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) + old_postinstall_cmds | old_postuninstall_cmds | \ + sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) # Double-quote double-evaled strings. eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" ;; @@ -3236,14 +4852,31 @@ esac done - cat <<__EOF__ > "${ofile}T" -#! $SHELL + case $lt_echo in + *'\[$]0 --fallback-echo"') + lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\[$]0 --fallback-echo"[$]/[$]0 --fallback-echo"/'` + ;; + esac + +ifelse([$1], [], + [cfgfile="${ofile}T" + trap "$rm \"$cfgfile\"; exit 1" 1 2 15 + $rm -f "$cfgfile" + AC_MSG_NOTICE([creating $ofile])], + [cfgfile="$ofile"]) + + cat <<__EOF__ >> "$cfgfile" +ifelse([$1], [], +[#! $SHELL -# `$echo "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. +# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services. # Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP) # NOTE: Changes made to this file will be lost: look at ltmain.sh. # -# Copyright (C) 1996-2000 Free Software Foundation, Inc. +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001 +# Free Software Foundation, Inc. +# +# This file is part of GNU Libtool: # Originally by Gordon Matzigkeit , 1996 # # This program is free software; you can redistribute it and/or modify @@ -3265,14 +4898,21 @@ # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. +# A sed program that does not truncate output. +SED=$lt_SED + # Sed that helps us avoid accidentally triggering echo(1) options like -n. -Xsed="sed -e s/^X//" +Xsed="$SED -e s/^X//" # The HP-UX ksh and POSIX shell print the target directory to stdout # if CDPATH is set. if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi -# ### BEGIN LIBTOOL CONFIG +# The names of the tagged configurations supported by this script. +available_tags= + +# ### BEGIN LIBTOOL CONFIG], +[# ### BEGIN LIBTOOL TAG CONFIG: $tagname]) # Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: @@ -3286,7 +4926,10 @@ build_old_libs=$enable_static # Whether or not to add -lc for building shared libraries. -build_libtool_need_lc=$need_lc +build_libtool_need_lc=$_LT_AC_TAGVAR(archive_cmds_need_lc, $1) + +# Whether or not to disallow shared libs when runtime libs are static +allow_libtool_libs_with_static_runtimes=$_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1) # Whether or not to optimize for fast installation. fast_install=$enable_fast_install @@ -3302,14 +4945,20 @@ AR=$lt_AR AR_FLAGS=$lt_AR_FLAGS -# The default C compiler. -CC=$lt_CC +# A C compiler. +LTCC=$lt_LTCC + +# A language-specific compiler. +CC=$lt_[]_LT_AC_TAGVAR(compiler, $1) # Is the compiler the GNU C compiler? -with_gcc=$GCC +with_gcc=$_LT_AC_TAGVAR(GCC, $1) + +# An ERE matcher. +EGREP=$lt_EGREP # The linker used to build libraries. -LD=$lt_LD +LD=$lt_[]_LT_AC_TAGVAR(LD, $1) # Whether we need hard or soft links. LN_S=$lt_LN_S @@ -3318,7 +4967,7 @@ NM=$lt_NM # A symbol stripping program -STRIP=$STRIP +STRIP=$lt_STRIP # Used to examine libraries when file_magic_cmd begins "file" MAGIC_CMD=$MAGIC_CMD @@ -3340,7 +4989,7 @@ reload_cmds=$lt_reload_cmds # How to pass a linker flag through the compiler. -wl=$lt_wl +wl=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) # Object file suffix (normally "o"). objext="$ac_objext" @@ -3348,18 +4997,21 @@ # Old archive suffix (normally "a"). libext="$libext" +# Shared library suffix (normally ".so"). +shrext_cmds='$shrext_cmds' + # Executable file suffix (normally ""). exeext="$exeext" # Additional compiler flags for building library objects. -pic_flag=$lt_pic_flag +pic_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) pic_mode=$pic_mode -# Does compiler simultaneously support -c and -o options? -compiler_c_o=$lt_compiler_c_o +# What is the maximum length of a command? +max_cmd_len=$lt_cv_sys_max_cmd_len -# Can we write directly to a .lo ? -compiler_o_lo=$lt_compiler_o_lo +# Does compiler simultaneously support -c and -o options? +compiler_c_o=$lt_[]_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1) # Must we lock files when doing compilation ? need_locks=$lt_need_locks @@ -3380,939 +5032,1770 @@ dlopen_self_static=$enable_dlopen_self_static # Compiler flag to prevent dynamic linking. -link_static_flag=$lt_link_static_flag +link_static_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_static, $1) # Compiler flag to turn off builtin functions. -no_builtin_flag=$lt_no_builtin_flag +no_builtin_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) # Compiler flag to allow reflexive dlopens. -export_dynamic_flag_spec=$lt_export_dynamic_flag_spec +export_dynamic_flag_spec=$lt_[]_LT_AC_TAGVAR(export_dynamic_flag_spec, $1) # Compiler flag to generate shared objects directly from archives. -whole_archive_flag_spec=$lt_whole_archive_flag_spec +whole_archive_flag_spec=$lt_[]_LT_AC_TAGVAR(whole_archive_flag_spec, $1) + +# Compiler flag to generate thread-safe objects. +thread_safe_flag_spec=$lt_[]_LT_AC_TAGVAR(thread_safe_flag_spec, $1) + +# Library versioning type. +version_type=$version_type + +# Format of library name prefix. +libname_spec=$lt_libname_spec + +# List of archive names. First name is the real one, the rest are links. +# The last name is the one that the linker finds with -lNAME. +library_names_spec=$lt_library_names_spec + +# The coded name of the library, if different from the real name. +soname_spec=$lt_soname_spec + +# Commands used to build and install an old-style archive. +RANLIB=$lt_RANLIB +old_archive_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_cmds, $1) +old_postinstall_cmds=$lt_old_postinstall_cmds +old_postuninstall_cmds=$lt_old_postuninstall_cmds + +# Create an old-style archive from a shared archive. +old_archive_from_new_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_new_cmds, $1) + +# Create a temporary old-style archive to link instead of a shared archive. +old_archive_from_expsyms_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) + +# Commands used to build and install a shared archive. +archive_cmds=$lt_[]_LT_AC_TAGVAR(archive_cmds, $1) +archive_expsym_cmds=$lt_[]_LT_AC_TAGVAR(archive_expsym_cmds, $1) +postinstall_cmds=$lt_postinstall_cmds +postuninstall_cmds=$lt_postuninstall_cmds + +# Commands used to build a loadable module (assumed same as above if empty) +module_cmds=$lt_[]_LT_AC_TAGVAR(module_cmds, $1) +module_expsym_cmds=$lt_[]_LT_AC_TAGVAR(module_expsym_cmds, $1) + +# Commands to strip libraries. +old_striplib=$lt_old_striplib +striplib=$lt_striplib + +# Dependencies to place before the objects being linked to create a +# shared library. +predep_objects=$lt_[]_LT_AC_TAGVAR(predep_objects, $1) + +# Dependencies to place after the objects being linked to create a +# shared library. +postdep_objects=$lt_[]_LT_AC_TAGVAR(postdep_objects, $1) + +# Dependencies to place before the objects being linked to create a +# shared library. +predeps=$lt_[]_LT_AC_TAGVAR(predeps, $1) + +# Dependencies to place after the objects being linked to create a +# shared library. +postdeps=$lt_[]_LT_AC_TAGVAR(postdeps, $1) + +# The library search path used internally by the compiler when linking +# a shared library. +compiler_lib_search_path=$lt_[]_LT_AC_TAGVAR(compiler_lib_search_path, $1) + +# Method to check whether dependent libraries are shared objects. +deplibs_check_method=$lt_deplibs_check_method + +# Command to use when deplibs_check_method == file_magic. +file_magic_cmd=$lt_file_magic_cmd + +# Flag that allows shared libraries with undefined symbols to be built. +allow_undefined_flag=$lt_[]_LT_AC_TAGVAR(allow_undefined_flag, $1) + +# Flag that forces no undefined symbols. +no_undefined_flag=$lt_[]_LT_AC_TAGVAR(no_undefined_flag, $1) + +# Commands used to finish a libtool library installation in a directory. +finish_cmds=$lt_finish_cmds + +# Same as above, but a single script fragment to be evaled but not shown. +finish_eval=$lt_finish_eval + +# Take the output of nm and produce a listing of raw symbols and C names. +global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe + +# Transform the output of nm in a proper C declaration +global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl + +# Transform the output of nm in a C name address pair +global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address + +# This is the shared library runtime path variable. +runpath_var=$runpath_var + +# This is the shared library path variable. +shlibpath_var=$shlibpath_var + +# Is shlibpath searched before the hard-coded library search path? +shlibpath_overrides_runpath=$shlibpath_overrides_runpath + +# How to hardcode a shared library path into an executable. +hardcode_action=$_LT_AC_TAGVAR(hardcode_action, $1) + +# Whether we should hardcode library paths into libraries. +hardcode_into_libs=$hardcode_into_libs + +# Flag to hardcode \$libdir into a binary during linking. +# This must work even if \$libdir does not exist. +hardcode_libdir_flag_spec=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) + +# If ld is used when linking, flag to hardcode \$libdir into +# a binary during linking. This must work even if \$libdir does +# not exist. +hardcode_libdir_flag_spec_ld=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1) + +# Whether we need a single -rpath flag with a separated argument. +hardcode_libdir_separator=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_separator, $1) + +# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the +# resulting binary. +hardcode_direct=$_LT_AC_TAGVAR(hardcode_direct, $1) + +# Set to yes if using the -LDIR flag during linking hardcodes DIR into the +# resulting binary. +hardcode_minus_L=$_LT_AC_TAGVAR(hardcode_minus_L, $1) + +# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into +# the resulting binary. +hardcode_shlibpath_var=$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1) + +# Set to yes if building a shared library automatically hardcodes DIR into the library +# and all subsequent libraries and executables linked against it. +hardcode_automatic=$_LT_AC_TAGVAR(hardcode_automatic, $1) + +# Variables whose values should be saved in libtool wrapper scripts and +# restored at relink time. +variables_saved_for_relink="$variables_saved_for_relink" + +# Whether libtool must link a program against all its dependency libraries. +link_all_deplibs=$_LT_AC_TAGVAR(link_all_deplibs, $1) + +# Compile-time system search path for libraries +sys_lib_search_path_spec=$lt_sys_lib_search_path_spec + +# Run-time system search path for libraries +sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec + +# Fix the shell variable \$srcfile for the compiler. +fix_srcfile_path="$_LT_AC_TAGVAR(fix_srcfile_path, $1)" + +# Set to yes if exported symbols are required. +always_export_symbols=$_LT_AC_TAGVAR(always_export_symbols, $1) + +# The commands to list exported symbols. +export_symbols_cmds=$lt_[]_LT_AC_TAGVAR(export_symbols_cmds, $1) + +# The commands to extract the exported symbol list from a shared archive. +extract_expsyms_cmds=$lt_extract_expsyms_cmds + +# Symbols that should not be listed in the preloaded symbols. +exclude_expsyms=$lt_[]_LT_AC_TAGVAR(exclude_expsyms, $1) + +# Symbols that must always be exported. +include_expsyms=$lt_[]_LT_AC_TAGVAR(include_expsyms, $1) + +ifelse([$1],[], +[# ### END LIBTOOL CONFIG], +[# ### END LIBTOOL TAG CONFIG: $tagname]) + +__EOF__ + +ifelse([$1],[], [ + case $host_os in + aix3*) + cat <<\EOF >> "$cfgfile" + +# AIX sometimes has problems with the GCC collect2 program. For some +# reason, if we set the COLLECT_NAMES environment variable, the problems +# vanish in a puff of smoke. +if test "X${COLLECT_NAMES+set}" != Xset; then + COLLECT_NAMES= + export COLLECT_NAMES +fi +EOF + ;; + esac + + # We use sed instead of cat because bash on DJGPP gets confused if + # if finds mixed CR/LF and LF-only lines. Since sed operates in + # text mode, it properly converts lines to CR/LF. This bash problem + # is reportedly fixed, but why not run on old versions too? + sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1) + + mv -f "$cfgfile" "$ofile" || \ + (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") + chmod +x "$ofile" +]) +else + # If there is no Makefile yet, we rely on a make rule to execute + # `config.status --recheck' to rerun these tests and create the + # libtool script then. + ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` + if test -f "$ltmain_in"; then + test -f Makefile && make "$ltmain" + fi +fi +])# AC_LIBTOOL_CONFIG + + +# AC_LIBTOOL_PROG_COMPILER_NO_RTTI([TAGNAME]) +# ------------------------------------------- +AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], +[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl + +_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= + +if test "$GCC" = yes; then + _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' + + AC_LIBTOOL_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions], + lt_cv_prog_compiler_rtti_exceptions, + [-fno-rtti -fno-exceptions], [], + [_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"]) +fi +])# AC_LIBTOOL_PROG_COMPILER_NO_RTTI + + +# AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE +# --------------------------------- +AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], +[AC_REQUIRE([AC_CANONICAL_HOST]) +AC_REQUIRE([AC_PROG_NM]) +AC_REQUIRE([AC_OBJEXT]) +# Check for command to grab the raw symbol name followed by C symbol from nm. +AC_MSG_CHECKING([command to parse $NM output from $compiler object]) +AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe], +[ +# These are sane defaults that work on at least a few old systems. +# [They come from Ultrix. What could be older than Ultrix?!! ;)] + +# Character class describing NM global symbol codes. +symcode='[[BCDEGRST]]' + +# Regexp to match symbols that can be accessed directly from C. +sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)' + +# Transform the above into a raw symbol and a C symbol. +symxfrm='\1 \2\3 \3' + +# Transform an extracted symbol line into a proper C declaration +lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'" + +# Transform an extracted symbol line into symbol name and symbol address +lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" + +# Define system-specific variables. +case $host_os in +aix*) + symcode='[[BCDT]]' + ;; +cygwin* | mingw* | pw32*) + symcode='[[ABCDGISTW]]' + ;; +hpux*) # Its linker distinguishes data from code symbols + if test "$host_cpu" = ia64; then + symcode='[[ABCDEGRST]]' + fi + lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" + lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" + ;; +irix* | nonstopux*) + symcode='[[BCDEGRST]]' + ;; +osf*) + symcode='[[BCDEGQRST]]' + ;; +solaris* | sysv5*) + symcode='[[BDRT]]' + ;; +sysv4) + symcode='[[DFNSTU]]' + ;; +esac -# Compiler flag to generate thread-safe objects. -thread_safe_flag_spec=$lt_thread_safe_flag_spec +# Handle CRLF in mingw tool chain +opt_cr= +case $build_os in +mingw*) + opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp + ;; +esac -# Library versioning type. -version_type=$version_type +# If we're using GNU nm, then use its standard symbol codes. +case `$NM -V 2>&1` in +*GNU* | *'with BFD'*) + symcode='[[ABCDGIRSTW]]' ;; +esac -# Format of library name prefix. -libname_spec=$lt_libname_spec +# Try without a prefix undercore, then with it. +for ac_symprfx in "" "_"; do -# List of archive names. First name is the real one, the rest are links. -# The last name is the one that the linker finds with -lNAME. -library_names_spec=$lt_library_names_spec + # Write the raw and C identifiers. + lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'" -# The coded name of the library, if different from the real name. -soname_spec=$lt_soname_spec + # Check to see that the pipe works correctly. + pipe_works=no -# Commands used to build and install an old-style archive. -RANLIB=$lt_RANLIB -old_archive_cmds=$lt_old_archive_cmds -old_postinstall_cmds=$lt_old_postinstall_cmds -old_postuninstall_cmds=$lt_old_postuninstall_cmds + rm -f conftest* + cat > conftest.$ac_ext < $nlist) && test -s "$nlist"; then + # Try sorting and uniquifying the output. + if sort "$nlist" | uniq > "$nlist"T; then + mv -f "$nlist"T "$nlist" + else + rm -f "$nlist"T + fi -# Create a temporary old-style archive to link instead of a shared archive. -old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds + # Make sure that we snagged all the symbols we need. + if grep ' nm_test_var$' "$nlist" >/dev/null; then + if grep ' nm_test_func$' "$nlist" >/dev/null; then + cat < conftest.$ac_ext +#ifdef __cplusplus +extern "C" { +#endif -# Commands used to build and install a shared archive. -archive_cmds=$lt_archive_cmds -archive_expsym_cmds=$lt_archive_expsym_cmds -postinstall_cmds=$lt_postinstall_cmds -postuninstall_cmds=$lt_postuninstall_cmds +EOF + # Now generate the symbol file. + eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext' -# Commands to strip libraries. -old_striplib=$lt_old_striplib -striplib=$lt_striplib + cat <> conftest.$ac_ext +#if defined (__STDC__) && __STDC__ +# define lt_ptr_t void * +#else +# define lt_ptr_t char * +# define const +#endif -# Method to check whether dependent libraries are shared objects. -deplibs_check_method=$lt_deplibs_check_method +/* The mapping between symbol names and symbols. */ +const struct { + const char *name; + lt_ptr_t address; +} +lt_preloaded_symbols[[]] = +{ +EOF + $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext + cat <<\EOF >> conftest.$ac_ext + {0, (lt_ptr_t) 0} +}; -# Command to use when deplibs_check_method == file_magic. -file_magic_cmd=$lt_file_magic_cmd +#ifdef __cplusplus +} +#endif +EOF + # Now try linking the two files. + mv conftest.$ac_objext conftstm.$ac_objext + lt_save_LIBS="$LIBS" + lt_save_CFLAGS="$CFLAGS" + LIBS="conftstm.$ac_objext" + CFLAGS="$CFLAGS$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)" + if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then + pipe_works=yes + fi + LIBS="$lt_save_LIBS" + CFLAGS="$lt_save_CFLAGS" + else + echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD + fi + else + echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD + fi + else + echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD + fi + else + echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD + cat conftest.$ac_ext >&5 + fi + rm -f conftest* conftst* -# Flag that allows shared libraries with undefined symbols to be built. -allow_undefined_flag=$lt_allow_undefined_flag + # Do not use the global_symbol_pipe unless it works. + if test "$pipe_works" = yes; then + break + else + lt_cv_sys_global_symbol_pipe= + fi +done +]) +if test -z "$lt_cv_sys_global_symbol_pipe"; then + lt_cv_sys_global_symbol_to_cdecl= +fi +if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then + AC_MSG_RESULT(failed) +else + AC_MSG_RESULT(ok) +fi +]) # AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE -# Flag that forces no undefined symbols. -no_undefined_flag=$lt_no_undefined_flag -# Commands used to finish a libtool library installation in a directory. -finish_cmds=$lt_finish_cmds +# AC_LIBTOOL_PROG_COMPILER_PIC([TAGNAME]) +# --------------------------------------- +AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC], +[_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)= +_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= +_LT_AC_TAGVAR(lt_prog_compiler_static, $1)= -# Same as above, but a single script fragment to be evaled but not shown. -finish_eval=$lt_finish_eval +AC_MSG_CHECKING([for $compiler option to produce PIC]) + ifelse([$1],[CXX],[ + # C++ specific cases for pic, static, wl, etc. + if test "$GXX" = yes; then + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' -# Take the output of nm and produce a listing of raw symbols and C names. -global_symbol_pipe=$lt_global_symbol_pipe + case $host_os in + aix*) + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + fi + ;; + amigaos*) + # FIXME: we need at least 68020 code to build shared libraries, but + # adding the `-m68020' flag to GCC prevents building anything better, + # like `-m68040'. + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' + ;; + beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) + # PIC is the default for these OSes. + ;; + mingw* | os2* | pw32*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT' + ;; + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' + ;; + *djgpp*) + # DJGPP does not support shared libraries at all + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= + ;; + sysv4*MP*) + if test -d /usr/nec; then + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic + fi + ;; + hpux*) + # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but + # not for PA HP-UX. + case "$host_cpu" in + hppa*64*|ia64*) + ;; + *) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + esac + ;; + *) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + esac + else + case $host_os in + aix4* | aix5*) + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + else + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' + fi + ;; + chorus*) + case $cc_basename in + cxch68) + # Green Hills C++ Compiler + # _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a" + ;; + esac + ;; + dgux*) + case $cc_basename in + ec++) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + ;; + ghcx) + # Green Hills C++ Compiler + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + ;; + *) + ;; + esac + ;; + freebsd* | kfreebsd*-gnu) + # FreeBSD uses GNU C++ + ;; + hpux9* | hpux10* | hpux11*) + case $cc_basename in + CC) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive" + if test "$host_cpu" != ia64; then + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z' + fi + ;; + aCC) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive" + case "$host_cpu" in + hppa*64*|ia64*) + # +Z the default + ;; + *) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z' + ;; + esac + ;; + *) + ;; + esac + ;; + irix5* | irix6* | nonstopux*) + case $cc_basename in + CC) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + # CC pic flag -KPIC is the default. + ;; + *) + ;; + esac + ;; + linux*) + case $cc_basename in + KCC) + # KAI C++ Compiler + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + icpc) + # Intel C++ + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' + ;; + cxx) + # Compaq C++ + # Make sure the PIC flag is empty. It appears that all Alpha + # Linux and Compaq Tru64 Unix objects are PIC. + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + *) + ;; + esac + ;; + lynxos*) + ;; + m88k*) + ;; + mvs*) + case $cc_basename in + cxx) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall' + ;; + *) + ;; + esac + ;; + netbsd* | knetbsd*-gnu) + ;; + osf3* | osf4* | osf5*) + case $cc_basename in + KCC) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' + ;; + RCC) + # Rational C++ 2.4.1 + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + ;; + cxx) + # Digital/Compaq C++ + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # Make sure the PIC flag is empty. It appears that all Alpha + # Linux and Compaq Tru64 Unix objects are PIC. + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + *) + ;; + esac + ;; + psos*) + ;; + sco*) + case $cc_basename in + CC) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + *) + ;; + esac + ;; + solaris*) + case $cc_basename in + CC) + # Sun C++ 4.2, 5.x and Centerline C++ + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' + ;; + gcx) + # Green Hills C++ Compiler + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' + ;; + *) + ;; + esac + ;; + sunos4*) + case $cc_basename in + CC) + # Sun C++ 4.x + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + lcc) + # Lucid + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + ;; + *) + ;; + esac + ;; + tandem*) + case $cc_basename in + NCC) + # NonStop-UX NCC 3.20 + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + ;; + *) + ;; + esac + ;; + unixware*) + ;; + vxworks*) + ;; + *) + _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no + ;; + esac + fi +], +[ + if test "$GCC" = yes; then + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' -# Transform the output of nm in a proper C declaration -global_symbol_to_cdecl=$lt_global_symbol_to_cdecl + case $host_os in + aix*) + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + fi + ;; -# Transform the output of nm in a C name address pair -global_symbol_to_c_name_address=$lt_global_symbol_to_c_name_address + amigaos*) + # FIXME: we need at least 68020 code to build shared libraries, but + # adding the `-m68020' flag to GCC prevents building anything better, + # like `-m68040'. + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' + ;; -# This is the shared library runtime path variable. -runpath_var=$runpath_var + beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) + # PIC is the default for these OSes. + ;; -# This is the shared library path variable. -shlibpath_var=$shlibpath_var + mingw* | pw32* | os2*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT' + ;; -# Is shlibpath searched before the hard-coded library search path? -shlibpath_overrides_runpath=$shlibpath_overrides_runpath + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' + ;; -# How to hardcode a shared library path into an executable. -hardcode_action=$hardcode_action + msdosdjgpp*) + # Just because we use GCC doesn't mean we suddenly get shared libraries + # on systems that don't support them. + _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no + enable_shared=no + ;; -# Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs + sysv4*MP*) + if test -d /usr/nec; then + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic + fi + ;; -# Flag to hardcode \$libdir into a binary during linking. -# This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec + hpux*) + # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but + # not for PA HP-UX. + case "$host_cpu" in + hppa*64*|ia64*) + # +Z the default + ;; + *) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + esac + ;; -# Whether we need a single -rpath flag with a separated argument. -hardcode_libdir_separator=$lt_hardcode_libdir_separator + *) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + esac + else + # PORTME Check for flag to pass linker flags through the system compiler. + case $host_os in + aix*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + else + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' + fi + ;; -# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the -# resulting binary. -hardcode_direct=$hardcode_direct + mingw* | pw32* | os2*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT' + ;; -# Set to yes if using the -LDIR flag during linking hardcodes DIR into the -# resulting binary. -hardcode_minus_L=$hardcode_minus_L + hpux9* | hpux10* | hpux11*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but + # not for PA HP-UX. + case "$host_cpu" in + hppa*64*|ia64*) + # +Z the default + ;; + *) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z' + ;; + esac + # Is there a better lt_prog_compiler_static that works with the bundled CC? + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' + ;; -# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into -# the resulting binary. -hardcode_shlibpath_var=$hardcode_shlibpath_var + irix5* | irix6* | nonstopux*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # PIC (with -KPIC) is the default. + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; -# Variables whose values should be saved in libtool wrapper scripts and -# restored at relink time. -variables_saved_for_relink="$variables_saved_for_relink" + newsos6) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; -# Whether libtool must link a program against all its dependency libraries. -link_all_deplibs=$link_all_deplibs + linux*) + case $CC in + icc* | ecc*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' + ;; + ccc*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # All Alpha code is PIC. + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + esac + ;; -# Compile-time system search path for libraries -sys_lib_search_path_spec=$lt_sys_lib_search_path_spec + osf3* | osf4* | osf5*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # All OSF/1 code is PIC. + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; -# Run-time system search path for libraries -sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec + sco3.2v5*) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kpic' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-dn' + ;; -# Fix the shell variable \$srcfile for the compiler. -fix_srcfile_path="$fix_srcfile_path" + solaris*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; -# Set to yes if exported symbols are required. -always_export_symbols=$always_export_symbols + sunos4*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; -# The commands to list exported symbols. -export_symbols_cmds=$lt_export_symbols_cmds + sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; -# The commands to extract the exported symbol list from a shared archive. -extract_expsyms_cmds=$lt_extract_expsyms_cmds + sysv4*MP*) + if test -d /usr/nec ;then + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + fi + ;; -# Symbols that should not be listed in the preloaded symbols. -exclude_expsyms=$lt_exclude_expsyms + uts4*) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; -# Symbols that must always be exported. -include_expsyms=$lt_include_expsyms + *) + _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no + ;; + esac + fi +]) +AC_MSG_RESULT([$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)]) -# ### END LIBTOOL CONFIG +# +# Check to make sure the PIC flag actually works. +# +if test -n "$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)"; then + AC_LIBTOOL_COMPILER_OPTION([if $compiler PIC flag $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) works], + _LT_AC_TAGVAR(lt_prog_compiler_pic_works, $1), + [$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])], [], + [case $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) in + "" | " "*) ;; + *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)" ;; + esac], + [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= + _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no]) +fi +case "$host_os" in + # For platforms which do not support PIC, -DPIC is meaningless: + *djgpp*) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= + ;; + *) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])" + ;; +esac +]) -__EOF__ +# AC_LIBTOOL_PROG_LD_SHLIBS([TAGNAME]) +# ------------------------------------ +# See if the linker supports building shared libraries. +AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS], +[AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) +ifelse([$1],[CXX],[ + _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' case $host_os in - aix3*) - cat <<\EOF >> "${ofile}T" - -# AIX sometimes has problems with the GCC collect2 program. For some -# reason, if we set the COLLECT_NAMES environment variable, the problems -# vanish in a puff of smoke. -if test "X${COLLECT_NAMES+set}" != Xset; then - COLLECT_NAMES= - export COLLECT_NAMES -fi -EOF + aix4* | aix5*) + # If we're using GNU nm, then we don't want the "-C" option. + # -C means demangle to AIX nm, but means don't demangle with GNU nm + if $NM -V 2>&1 | grep 'GNU' > /dev/null; then + _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' + else + _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' + fi ;; + pw32*) + _LT_AC_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds" + ;; + cygwin* | mingw*) + _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGS]] /s/.* \([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols' + ;; + linux*) + _LT_AC_TAGVAR(link_all_deplibs, $1)=no + ;; + *) + _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + ;; esac +],[ + runpath_var= + _LT_AC_TAGVAR(allow_undefined_flag, $1)= + _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no + _LT_AC_TAGVAR(archive_cmds, $1)= + _LT_AC_TAGVAR(archive_expsym_cmds, $1)= + _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)= + _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)= + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)= + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= + _LT_AC_TAGVAR(thread_safe_flag_spec, $1)= + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= + _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= + _LT_AC_TAGVAR(hardcode_direct, $1)=no + _LT_AC_TAGVAR(hardcode_minus_L, $1)=no + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported + _LT_AC_TAGVAR(link_all_deplibs, $1)=unknown + _LT_AC_TAGVAR(hardcode_automatic, $1)=no + _LT_AC_TAGVAR(module_cmds, $1)= + _LT_AC_TAGVAR(module_expsym_cmds, $1)= + _LT_AC_TAGVAR(always_export_symbols, $1)=no + _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + # include_expsyms should be a list of space-separated symbols to be *always* + # included in the symbol list + _LT_AC_TAGVAR(include_expsyms, $1)= + # exclude_expsyms can be an extended regexp of symbols to exclude + # it will be wrapped by ` (' and `)$', so one must not match beginning or + # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', + # as well as any symbol that contains `d'. + _LT_AC_TAGVAR(exclude_expsyms, $1)="_GLOBAL_OFFSET_TABLE_" + # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out + # platforms (ab)use it in PIC code, but their linkers get confused if + # the symbol is explicitly referenced. Since portable code cannot + # rely on this symbol name, it's probably fine to never include it in + # preloaded symbol tables. + extract_expsyms_cmds= case $host_os in - cygwin* | mingw* | pw32* | os2*) - cat <<'EOF' >> "${ofile}T" - # This is a source program that is used to create dlls on Windows - # Don't remove nor modify the starting and closing comments -# /* ltdll.c starts here */ -# #define WIN32_LEAN_AND_MEAN -# #include -# #undef WIN32_LEAN_AND_MEAN -# #include -# -# #ifndef __CYGWIN__ -# # ifdef __CYGWIN32__ -# # define __CYGWIN__ __CYGWIN32__ -# # endif -# #endif -# -# #ifdef __cplusplus -# extern "C" { -# #endif -# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved); -# #ifdef __cplusplus -# } -# #endif -# -# #ifdef __CYGWIN__ -# #include -# DECLARE_CYGWIN_DLL( DllMain ); -# #endif -# HINSTANCE __hDllInstance_base; -# -# BOOL APIENTRY -# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved) -# { -# __hDllInstance_base = hInst; -# return TRUE; -# } -# /* ltdll.c ends here */ - # This is a source program that is used to create import libraries - # on Windows for dlls which lack them. Don't remove nor modify the - # starting and closing comments -# /* impgen.c starts here */ -# /* Copyright (C) 1999-2000 Free Software Foundation, Inc. -# -# This file is part of GNU libtool. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -# */ -# -# #include /* for printf() */ -# #include /* for open(), lseek(), read() */ -# #include /* for O_RDONLY, O_BINARY */ -# #include /* for strdup() */ -# -# /* O_BINARY isn't required (or even defined sometimes) under Unix */ -# #ifndef O_BINARY -# #define O_BINARY 0 -# #endif -# -# static unsigned int -# pe_get16 (fd, offset) -# int fd; -# int offset; -# { -# unsigned char b[2]; -# lseek (fd, offset, SEEK_SET); -# read (fd, b, 2); -# return b[0] + (b[1]<<8); -# } -# -# static unsigned int -# pe_get32 (fd, offset) -# int fd; -# int offset; -# { -# unsigned char b[4]; -# lseek (fd, offset, SEEK_SET); -# read (fd, b, 4); -# return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24); -# } -# -# static unsigned int -# pe_as32 (ptr) -# void *ptr; -# { -# unsigned char *b = ptr; -# return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24); -# } -# -# int -# main (argc, argv) -# int argc; -# char *argv[]; -# { -# int dll; -# unsigned long pe_header_offset, opthdr_ofs, num_entries, i; -# unsigned long export_rva, export_size, nsections, secptr, expptr; -# unsigned long name_rvas, nexp; -# unsigned char *expdata, *erva; -# char *filename, *dll_name; -# -# filename = argv[1]; -# -# dll = open(filename, O_RDONLY|O_BINARY); -# if (dll < 1) -# return 1; -# -# dll_name = filename; -# -# for (i=0; filename[i]; i++) -# if (filename[i] == '/' || filename[i] == '\\' || filename[i] == ':') -# dll_name = filename + i +1; -# -# pe_header_offset = pe_get32 (dll, 0x3c); -# opthdr_ofs = pe_header_offset + 4 + 20; -# num_entries = pe_get32 (dll, opthdr_ofs + 92); -# -# if (num_entries < 1) /* no exports */ -# return 1; -# -# export_rva = pe_get32 (dll, opthdr_ofs + 96); -# export_size = pe_get32 (dll, opthdr_ofs + 100); -# nsections = pe_get16 (dll, pe_header_offset + 4 +2); -# secptr = (pe_header_offset + 4 + 20 + -# pe_get16 (dll, pe_header_offset + 4 + 16)); -# -# expptr = 0; -# for (i = 0; i < nsections; i++) -# { -# char sname[8]; -# unsigned long secptr1 = secptr + 40 * i; -# unsigned long vaddr = pe_get32 (dll, secptr1 + 12); -# unsigned long vsize = pe_get32 (dll, secptr1 + 16); -# unsigned long fptr = pe_get32 (dll, secptr1 + 20); -# lseek(dll, secptr1, SEEK_SET); -# read(dll, sname, 8); -# if (vaddr <= export_rva && vaddr+vsize > export_rva) -# { -# expptr = fptr + (export_rva - vaddr); -# if (export_rva + export_size > vaddr + vsize) -# export_size = vsize - (export_rva - vaddr); -# break; -# } -# } -# -# expdata = (unsigned char*)malloc(export_size); -# lseek (dll, expptr, SEEK_SET); -# read (dll, expdata, export_size); -# erva = expdata - export_rva; -# -# nexp = pe_as32 (expdata+24); -# name_rvas = pe_as32 (expdata+32); -# -# printf ("EXPORTS\n"); -# for (i = 0; i> "${ofile}T" || (rm -f "${ofile}T"; exit 1) + _LT_AC_TAGVAR(ld_shlibs, $1)=yes + if test "$with_gnu_ld" = yes; then + # If archive_cmds runs LD, not CC, wlarc should be empty + wlarc='${wl}' - mv -f "${ofile}T" "$ofile" || \ - (rm -f "$ofile" && cp "${ofile}T" "$ofile" && rm -f "${ofile}T") - chmod +x "$ofile" -fi + # See if GNU ld supports shared libraries. + case $host_os in + aix3* | aix4* | aix5*) + # On AIX/PPC, the GNU linker is very broken + if test "$host_cpu" != ia64; then + _LT_AC_TAGVAR(ld_shlibs, $1)=no + cat <&2 -])# _LT_AC_LTCONFIG_HACK +*** Warning: the GNU linker, at least up to release 2.9.1, is reported +*** to be unable to reliably create shared libraries on AIX. +*** Therefore, libtool is disabling shared libraries support. If you +*** really care for shared libraries, you may want to modify your PATH +*** so that a non-GNU linker is found, and then restart. -# AC_LIBTOOL_DLOPEN - enable checks for dlopen support -AC_DEFUN([AC_LIBTOOL_DLOPEN], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])]) +EOF + fi + ;; -# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's -AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])]) + amigaos*) + _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + + # Samuel A. Falvo II reports + # that the semantics of dynamic libraries on AmigaOS, at least up + # to version 4, is to share data among multiple programs linked + # with the same dynamic library. Since this doesn't match the + # behavior of shared libraries on other platforms, we can't use + # them. + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; -# AC_ENABLE_SHARED - implement the --enable-shared flag -# Usage: AC_ENABLE_SHARED[(DEFAULT)] -# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to -# `yes'. -AC_DEFUN([AC_ENABLE_SHARED], -[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl -AC_ARG_ENABLE(shared, -changequote(<<, >>)dnl -<< --enable-shared[=PKGS] build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT], -changequote([, ])dnl -[p=${PACKAGE-default} -case $enableval in -yes) enable_shared=yes ;; -no) enable_shared=no ;; -*) - enable_shared=no - # Look at the argument we got. We use all the common list separators. - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," - for pkg in $enableval; do - if test "X$pkg" = "X$p"; then - enable_shared=yes - fi - done - IFS="$ac_save_ifs" - ;; -esac], -enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl -]) + beos*) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported + # Joseph Beckenbach says some releases of gcc + # support --undefined. This deserves some investigation. FIXME + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + else + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; -# AC_DISABLE_SHARED - set the default shared flag to --disable-shared -AC_DEFUN([AC_DISABLE_SHARED], -[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl -AC_ENABLE_SHARED(no)]) + cygwin* | mingw* | pw32*) + # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, + # as there is no search path for DLLs. + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_AC_TAGVAR(always_export_symbols, $1)=no + _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGS]] /s/.* \([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols' + + if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' + # If the export-symbols file already is a .def file (1st line + # is EXPORTS), use it as is; otherwise, prepend... + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then + cp $export_symbols $output_objdir/$soname.def; + else + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ + $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' + else + ld_shlibs=no + fi + ;; -# AC_ENABLE_STATIC - implement the --enable-static flag -# Usage: AC_ENABLE_STATIC[(DEFAULT)] -# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to -# `yes'. -AC_DEFUN([AC_ENABLE_STATIC], -[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl -AC_ARG_ENABLE(static, -changequote(<<, >>)dnl -<< --enable-static[=PKGS] build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT], -changequote([, ])dnl -[p=${PACKAGE-default} -case $enableval in -yes) enable_static=yes ;; -no) enable_static=no ;; -*) - enable_static=no - # Look at the argument we got. We use all the common list separators. - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," - for pkg in $enableval; do - if test "X$pkg" = "X$p"; then - enable_static=yes - fi - done - IFS="$ac_save_ifs" - ;; -esac], -enable_static=AC_ENABLE_STATIC_DEFAULT)dnl -]) + netbsd* | knetbsd*-gnu) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' + wlarc= + else + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + fi + ;; -# AC_DISABLE_STATIC - set the default static flag to --disable-static -AC_DEFUN([AC_DISABLE_STATIC], -[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl -AC_ENABLE_STATIC(no)]) + solaris* | sysv5*) + if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then + _LT_AC_TAGVAR(ld_shlibs, $1)=no + cat <&2 + +*** Warning: The releases 2.8.* of the GNU linker cannot reliably +*** create shared libraries on Solaris systems. Therefore, libtool +*** is disabling shared libraries support. We urge you to upgrade GNU +*** binutils to release 2.9.1 or newer. Another option is to modify +*** your PATH or compiler configuration so that the native linker is +*** used, and then restart. + +EOF + elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; + sunos4*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' + wlarc= + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; -# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag -# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)] -# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to -# `yes'. -AC_DEFUN([AC_ENABLE_FAST_INSTALL], -[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl -AC_ARG_ENABLE(fast-install, -changequote(<<, >>)dnl -<< --enable-fast-install[=PKGS] optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT], -changequote([, ])dnl -[p=${PACKAGE-default} -case $enableval in -yes) enable_fast_install=yes ;; -no) enable_fast_install=no ;; -*) - enable_fast_install=no - # Look at the argument we got. We use all the common list separators. - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," - for pkg in $enableval; do - if test "X$pkg" = "X$p"; then - enable_fast_install=yes + linux*) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + tmp_archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_cmds, $1)="$tmp_archive_cmds" + supports_anon_versioning=no + case `$LD -v 2>/dev/null` in + *\ [01].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11 + *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... + *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... + *\ 2.11.*) ;; # other 2.11 versions + *) supports_anon_versioning=yes ;; + esac + if test $supports_anon_versioning = yes; then + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $output_objdir/$libname.ver~ +cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ +$echo "local: *; };" >> $output_objdir/$libname.ver~ + $CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' + else + _LT_AC_TAGVAR(archive_expsym_cmds, $1)="$tmp_archive_cmds" + fi + _LT_AC_TAGVAR(link_all_deplibs, $1)=no + else + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + *) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + + if test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = yes; then + runpath_var=LD_RUN_PATH + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + # ancient GNU ld didn't support --whole-archive et. al. + if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + else + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= + fi fi - done - IFS="$ac_save_ifs" - ;; -esac], -enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl -]) + else + # PORTME fill in a description of your system's linker (not GNU ld) + case $host_os in + aix3*) + _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_AC_TAGVAR(always_export_symbols, $1)=yes + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' + # Note: this linker hardcodes the directories in LIBPATH if there + # are no directories specified by -L. + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + if test "$GCC" = yes && test -z "$link_static_flag"; then + # Neither direct hardcoding nor static linking is supported with a + # broken collect2. + _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported + fi + ;; -# AC_DISABLE_FAST_INSTALL - set the default to --disable-fast-install -AC_DEFUN([AC_DISABLE_FAST_INSTALL], -[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl -AC_ENABLE_FAST_INSTALL(no)]) + aix4* | aix5*) + if test "$host_cpu" = ia64; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. + aix_use_runtimelinking=no + exp_sym_flag='-Bexport' + no_entry_flag="" + else + # If we're using GNU nm, then we don't want the "-C" option. + # -C means demangle to AIX nm, but means don't demangle with GNU nm + if $NM -V 2>&1 | grep 'GNU' > /dev/null; then + _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' + else + _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' + fi + aix_use_runtimelinking=no -# AC_LIBTOOL_PICMODE - implement the --with-pic flag -# Usage: AC_LIBTOOL_PICMODE[(MODE)] -# Where MODE is either `yes' or `no'. If omitted, it defaults to -# `both'. -AC_DEFUN([AC_LIBTOOL_PICMODE], -[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl -pic_mode=ifelse($#,1,$1,default)]) + # Test if we are trying to use run time linking or normal + # AIX style linking. If -brtl is somewhere in LDFLAGS, we + # need to do runtime linking. + case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*) + for ld_flag in $LDFLAGS; do + if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then + aix_use_runtimelinking=yes + break + fi + done + esac + exp_sym_flag='-bexport' + no_entry_flag='-bnoentry' + fi -# AC_PATH_TOOL_PREFIX - find a file program which can recognise shared library -AC_DEFUN([AC_PATH_TOOL_PREFIX], -[AC_MSG_CHECKING([for $1]) -AC_CACHE_VAL(lt_cv_path_MAGIC_CMD, -[case $MAGIC_CMD in - /*) - lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. - ;; - ?:/*) - lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path. - ;; - *) - ac_save_MAGIC_CMD="$MAGIC_CMD" - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" -dnl $ac_dummy forces splitting on constant user-supplied paths. -dnl POSIX.2 word splitting is done only on the output of word expansions, -dnl not every word. This closes a longstanding sh security hole. - ac_dummy="ifelse([$2], , $PATH, [$2])" - for ac_dir in $ac_dummy; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$1; then - lt_cv_path_MAGIC_CMD="$ac_dir/$1" - if test -n "$file_magic_test_file"; then - case $deplibs_check_method in - "file_magic "*) - file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`" - MAGIC_CMD="$lt_cv_path_MAGIC_CMD" - if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | - egrep "$file_magic_regex" > /dev/null; then - : + # When large executables or shared objects are built, AIX ld can + # have problems creating the table of contents. If linking a library + # or program results in "error TOC overflow" add -mminimal-toc to + # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not + # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. + + _LT_AC_TAGVAR(archive_cmds, $1)='' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':' + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + + if test "$GCC" = yes; then + case $host_os in aix4.[012]|aix4.[012].*) + # We only want to do this on AIX 4.2 and lower, the check + # below for broken collect2 doesn't work under 4.3+ + collect2name=`${CC} -print-prog-name=collect2` + if test -f "$collect2name" && \ + strings "$collect2name" | grep resolve_lib_name >/dev/null + then + # We have reworked collect2 + _LT_AC_TAGVAR(hardcode_direct, $1)=yes else - cat <&2 - -*** Warning: the command libtool uses to detect shared libraries, -*** $file_magic_cmd, produces output that libtool cannot recognize. -*** The result is that libtool may fail to recognize shared libraries -*** as such. This will affect the creation of libtool libraries that -*** depend on shared libraries, but programs linked with such libtool -*** libraries will work regardless of this problem. Nevertheless, you -*** may want to report the problem to your system manager and/or to -*** bug-libtool@gnu.org - -EOF - fi ;; + # We have old collect2 + _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported + # It fails to find uninstalled libraries when the uninstalled + # path is not listed in the libpath. Setting hardcode_minus_L + # to unsupported forces relinking + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= + fi esac + shared_flag='-shared' + else + # not using gcc + if test "$host_cpu" = ia64; then + # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release + # chokes on -Wl,-G. The following line is correct: + shared_flag='-G' + else + if test "$aix_use_runtimelinking" = yes; then + shared_flag='${wl}-G' + else + shared_flag='${wl}-bM:SRE' + fi + fi fi - break - fi - done - IFS="$ac_save_ifs" - MAGIC_CMD="$ac_save_MAGIC_CMD" - ;; -esac]) -MAGIC_CMD="$lt_cv_path_MAGIC_CMD" -if test -n "$MAGIC_CMD"; then - AC_MSG_RESULT($MAGIC_CMD) -else - AC_MSG_RESULT(no) -fi -]) + # It seems that -bexpall does not export symbols beginning with + # underscore (_), so it is better to generate a list of symbols to export. + _LT_AC_TAGVAR(always_export_symbols, $1)=yes + if test "$aix_use_runtimelinking" = yes; then + # Warning - without using the other runtime loading flags (-brtl), + # -berok will link without error, but may produce a broken library. + _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok' + # Determine the default libpath from the value encoded in an empty executable. + _LT_AC_SYS_LIBPATH_AIX + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" + _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag" + else + if test "$host_cpu" = ia64; then + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' + _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs" + _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" + else + # Determine the default libpath from the value encoded in an empty executable. + _LT_AC_SYS_LIBPATH_AIX + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" + # Warning - without using the other run time loading flags, + # -berok will link without error, but may produce a broken library. + _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' + # -bexpall does not export symbols beginning with underscore (_) + _LT_AC_TAGVAR(always_export_symbols, $1)=yes + # Exported symbols can be pulled into shared objects from archives + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' ' + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes + # This is similar to how AIX traditionally builds it's shared libraries. + _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + fi + fi + ;; -# AC_PATH_MAGIC - find a file program which can recognise a shared library -AC_DEFUN([AC_PATH_MAGIC], -[AC_REQUIRE([AC_CHECK_TOOL_PREFIX])dnl -AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin:$PATH) -if test -z "$lt_cv_path_MAGIC_CMD"; then - if test -n "$ac_tool_prefix"; then - AC_PATH_TOOL_PREFIX(file, /usr/bin:$PATH) - else - MAGIC_CMD=: - fi -fi -]) + amigaos*) + _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + # see comment about different semantics on the GNU ld section + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + bsdi4*) + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic + ;; -# AC_PROG_LD - find the path to the GNU or non-GNU linker -AC_DEFUN([AC_PROG_LD], -[AC_ARG_WITH(gnu-ld, -[ --with-gnu-ld assume the C compiler uses GNU ld [default=no]], -test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no) -AC_REQUIRE([AC_PROG_CC])dnl -AC_REQUIRE([AC_CANONICAL_HOST])dnl -AC_REQUIRE([AC_CANONICAL_BUILD])dnl -AC_REQUIRE([_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR])dnl -ac_prog=ld -if test "$GCC" = yes; then - # Check if gcc -print-prog-name=ld gives a path. - AC_MSG_CHECKING([for ld used by GCC]) - case $host in - *-*-mingw*) - # gcc leaves a trailing carriage return which upsets mingw - ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; - *) - ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; - esac - case $ac_prog in - # Accept absolute paths. - [[\\/]]* | [[A-Za-z]]:[[\\/]]*) - re_direlt='/[[^/]][[^/]]*/\.\./' - # Canonicalize the path of ld - ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'` - while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do - ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"` - done - test -z "$LD" && LD="$ac_prog" + cygwin* | mingw* | pw32*) + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' + _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported + # Tell ltmain to make .lib files, not .a files. + libext=lib + # Tell ltmain to make .dll files, not .so files. + shrext_cmds=".dll" + # FIXME: Setting linknames here is a bad hack. + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames=' + # The linker will automatically build a .lib file if we build a DLL. + _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='true' + # FIXME: Should let the user specify the lib program. + _LT_AC_TAGVAR(old_archive_cmds, $1)='lib /OUT:$oldlib$oldobjs$old_deplibs' + fix_srcfile_path='`cygpath -w "$srcfile"`' + _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes ;; - "") - # If it fails, then pretend we aren't using GCC. - ac_prog=ld - ;; - *) - # If it is relative, then search for the first ld in PATH. - with_gnu_ld=unknown - ;; - esac -elif test "$with_gnu_ld" = yes; then - AC_MSG_CHECKING([for GNU ld]) -else - AC_MSG_CHECKING([for non-GNU ld]) -fi -AC_CACHE_VAL(lt_cv_path_LD, -[if test -z "$LD"; then - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for ac_dir in $PATH; do - test -z "$ac_dir" && ac_dir=. - if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then - lt_cv_path_LD="$ac_dir/$ac_prog" - # Check to see if the program is GNU ld. I'd rather use --version, - # but apparently some GNU ld's only accept -v. - # Break only if it was the GNU/non-GNU ld that we prefer. - if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then - test "$with_gnu_ld" != no && break + + darwin* | rhapsody*) + if test "$GXX" = yes ; then + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no + case "$host_os" in + rhapsody* | darwin1.[[012]]) + _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined suppress' + ;; + *) # Darwin 1.3 on + if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then + _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress' else - test "$with_gnu_ld" != yes && break + case ${MACOSX_DEPLOYMENT_TARGET} in + 10.[[012]]) + _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress' + ;; + 10.*) + _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined dynamic_lookup' + ;; + esac + fi + ;; + esac + lt_int_apple_cc_single_mod=no + output_verbose_link_cmd='echo' + if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then + lt_int_apple_cc_single_mod=yes + fi + if test "X$lt_int_apple_cc_single_mod" = Xyes ; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring' + else + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring' fi + _LT_AC_TAGVAR(module_cmds, $1)='$CC ${wl}-bind_at_load $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' + # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's + if test "X$lt_int_apple_cc_single_mod" = Xyes ; then + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + else + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + fi + _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + _LT_AC_TAGVAR(hardcode_direct, $1)=no + _LT_AC_TAGVAR(hardcode_automatic, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience' + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + else + _LT_AC_TAGVAR(ld_shlibs, $1)=no fi - done - IFS="$ac_save_ifs" -else - lt_cv_path_LD="$LD" # Let the user override the test with a path. -fi]) -LD="$lt_cv_path_LD" -if test -n "$LD"; then - AC_MSG_RESULT($LD) -else - AC_MSG_RESULT(no) -fi -test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH]) -AC_PROG_LD_GNU -]) + ;; -# AC_PROG_LD_GNU - -AC_DEFUN([AC_PROG_LD_GNU], -[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld, -[# I'd rather use --version here, but apparently some GNU ld's only accept -v. -if $LD -v 2>&1 &5; then - lt_cv_prog_gnu_ld=yes -else - lt_cv_prog_gnu_ld=no -fi]) -with_gnu_ld=$lt_cv_prog_gnu_ld -]) + dgux*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; -# AC_PROG_LD_RELOAD_FLAG - find reload flag for linker -# -- PORTME Some linkers may need a different reload flag. -AC_DEFUN([AC_PROG_LD_RELOAD_FLAG], -[AC_CACHE_CHECK([for $LD option to reload object files], lt_cv_ld_reload_flag, -[lt_cv_ld_reload_flag='-r']) -reload_flag=$lt_cv_ld_reload_flag -test -n "$reload_flag" && reload_flag=" $reload_flag" -]) + freebsd1*) + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; -# AC_DEPLIBS_CHECK_METHOD - how to check for library dependencies -# -- PORTME fill in with the dynamic library characteristics -AC_DEFUN([AC_DEPLIBS_CHECK_METHOD], -[AC_CACHE_CHECK([how to recognise dependant libraries], -lt_cv_deplibs_check_method, -[lt_cv_file_magic_cmd='$MAGIC_CMD' -lt_cv_file_magic_test_file= -lt_cv_deplibs_check_method='unknown' -# Need to set the preceding variable on all platforms that support -# interlibrary dependencies. -# 'none' -- dependencies not supported. -# `unknown' -- same as none, but documents that we really don't know. -# 'pass_all' -- all dependencies passed with no checks. -# 'test_compile' -- check by making test program. -# 'file_magic [[regex]]' -- check by looking for files in library path -# which responds to the $file_magic_cmd with a given egrep regex. -# If you have `file' or equivalent on your system and you're not sure -# whether `pass_all' will *always* work, you probably want this one. + # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor + # support. Future versions do this automatically, but an explicit c++rt0.o + # does not break anything, and helps significantly (at the cost of a little + # extra space). + freebsd2.2*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; -case $host_os in -aix4* | aix5*) - lt_cv_deplibs_check_method=pass_all - ;; + # Unfortunately, older versions of FreeBSD 2 do not have this feature. + freebsd2*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; -beos*) - lt_cv_deplibs_check_method=pass_all - ;; + # FreeBSD 3 and greater uses gcc -shared to do shared libraries. + freebsd* | kfreebsd*-gnu) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; -bsdi4*) - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)' - lt_cv_file_magic_cmd='/usr/bin/file -L' - lt_cv_file_magic_test_file=/shlib/libc.so - ;; + hpux9*) + if test "$GCC" = yes; then + _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + else + _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + fi + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + ;; -cygwin* | mingw* | pw32*) - lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' - lt_cv_file_magic_cmd='$OBJDUMP -f' - ;; + hpux10* | hpux11*) + if test "$GCC" = yes -a "$with_gnu_ld" = no; then + case "$host_cpu" in + hppa*64*|ia64*) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + else + case "$host_cpu" in + hppa*64*|ia64*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $libobjs $deplibs $linker_flags' + ;; + *) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' + ;; + esac + fi + if test "$with_gnu_ld" = no; then + case "$host_cpu" in + hppa*64*) + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_AC_TAGVAR(hardcode_direct, $1)=no + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + ia64*) + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(hardcode_direct, $1)=no + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + ;; + *) + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + ;; + esac + fi + ;; -darwin* | rhapsody*) - lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library' - lt_cv_file_magic_cmd='/usr/bin/file -L' - case "$host_os" in - rhapsody* | darwin1.[[012]]) - lt_cv_file_magic_test_file=`echo /System/Library/Frameworks/System.framework/Versions/*/System | head -1` - ;; - *) # Darwin 1.3 on - lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib' - ;; - esac - ;; + irix5* | irix6* | nonstopux*) + if test "$GCC" = yes; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + else + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir' + fi + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + ;; -freebsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then - case $host_cpu in - i*86 ) - # Not sure whether the presence of OpenBSD here was a mistake. - # Let's accept both of them until this is cleared up. - lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[[3-9]]86 (compact )?demand paged shared library' - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` + netbsd* | knetbsd*-gnu) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out + else + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF + fi + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + newsos6) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + openbsd*) + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + else + case $host_os in + openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + ;; + *) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + ;; + esac + fi + ;; + + os2*) + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_AC_TAGVAR(archive_cmds, $1)='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' + _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' + ;; + + osf3*) + if test "$GCC" = yes; then + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + else + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + fi + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: ;; - esac - else - lt_cv_deplibs_check_method=pass_all - fi - ;; -gnu*) - lt_cv_deplibs_check_method=pass_all - ;; + osf4* | osf5*) # as osf3* with the addition of -msym flag + if test "$GCC" = yes; then + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + else + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ + $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp' -hpux10.20*|hpux11*) - lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library' - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=/usr/lib/libc.sl - ;; + # Both c and cxx compiler support -rpath directly + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' + fi + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + ;; -irix5* | irix6*) - case $host_os in - irix5*) - # this will be overridden with pass_all, but let us keep it just in case - lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1" - ;; - *) - case $LD in - *-32|*"-32 ") libmagic=32-bit;; - *-n32|*"-n32 ") libmagic=N32;; - *-64|*"-64 ") libmagic=64-bit;; - *) libmagic=never-match;; - esac - # this will be overridden with pass_all, but let us keep it just in case - lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[[1234]] dynamic lib MIPS - version 1" - ;; - esac - lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*` - lt_cv_deplibs_check_method=pass_all - ;; + sco3.2v5*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' + runpath_var=LD_RUN_PATH + hardcode_runpath_var=yes + ;; -# This must be Linux ELF. -linux-gnu*) - case $host_cpu in - alpha* | hppa* | i*86 | powerpc* | sparc* | ia64* | s390* ) - lt_cv_deplibs_check_method=pass_all ;; - *) - # glibc up to 2.1.1 does not perform some relocations on ARM - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' ;; - esac - lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so` - ;; + solaris*) + _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text' + if test "$GCC" = yes; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp' + else + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' + fi + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + case $host_os in + solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; + *) # Supported since Solaris 2.6 (maybe 2.5.1?) + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' ;; + esac + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + ;; -netbsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then - lt_cv_deplibs_check_method='match_pattern /lib[[^/\.]]+\.so\.[[0-9]]+\.[[0-9]]+$' - else - lt_cv_deplibs_check_method='match_pattern /lib[[^/\.]]+\.so$' - fi - ;; + sunos4*) + if test "x$host_vendor" = xsequent; then + # Use $CC to link under sequent, because it throws in some extra .o + # files that make .init and .fini sections work. + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' + else + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' + fi + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; -newos6*) - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)' - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=/usr/lib/libnls.so - ;; + sysv4) + case $host_vendor in + sni) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes # is this really true??? + ;; + siemens) + ## LD is ld it makes a PLAMLIB + ## CC just makes a GrossModule. + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs' + _LT_AC_TAGVAR(hardcode_direct, $1)=no + ;; + motorola) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie + ;; + esac + runpath_var='LD_RUN_PATH' + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; -openbsd*) - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB shared object' - else - lt_cv_deplibs_check_method='file_magic OpenBSD.* shared library' - fi - ;; + sysv4.3*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport' + ;; -osf3* | osf4* | osf5*) - # this will be overridden with pass_all, but let us keep it just in case - lt_cv_deplibs_check_method='file_magic COFF format alpha shared library' - lt_cv_file_magic_test_file=/shlib/libc.so - lt_cv_deplibs_check_method=pass_all - ;; + sysv4*MP*) + if test -d /usr/nec; then + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + runpath_var=LD_RUN_PATH + hardcode_runpath_var=yes + _LT_AC_TAGVAR(ld_shlibs, $1)=yes + fi + ;; -sco3.2v5*) - lt_cv_deplibs_check_method=pass_all - ;; + sysv4.2uw2*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_minus_L, $1)=no + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + hardcode_runpath_var=yes + runpath_var=LD_RUN_PATH + ;; -solaris*) - lt_cv_deplibs_check_method=pass_all - lt_cv_file_magic_test_file=/lib/libc.so - ;; + sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7*) + _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z ${wl}text' + if test "$GCC" = yes; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + else + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + fi + runpath_var='LD_RUN_PATH' + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; -sysv5uw[[78]]* | sysv4*uw2*) - lt_cv_deplibs_check_method=pass_all - ;; + sysv5*) + _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text' + # $CC -shared without GNU ld will not create a library from C++ + # object files and a static libstdc++, better avoid it by now + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + runpath_var='LD_RUN_PATH' + ;; -sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) - case $host_vendor in - motorola) - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]' - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` - ;; - ncr) - lt_cv_deplibs_check_method=pass_all - ;; - sequent) - lt_cv_file_magic_cmd='/bin/file' - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' - ;; - sni) - lt_cv_file_magic_cmd='/bin/file' - lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib" - lt_cv_file_magic_test_file=/lib/libc.so - ;; - esac - ;; -esac -]) -file_magic_cmd=$lt_cv_file_magic_cmd -deplibs_check_method=$lt_cv_deplibs_check_method + uts4*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + *) + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + esac + fi ]) +AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)]) +test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no +variables_saved_for_relink="PATH $shlibpath_var $runpath_var" +if test "$GCC" = yes; then + variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" +fi -# AC_PROG_NM - find the path to a BSD-compatible name lister -AC_DEFUN([AC_PROG_NM], -[AC_REQUIRE([_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR])dnl -AC_MSG_CHECKING([for BSD-compatible nm]) -AC_CACHE_VAL(lt_cv_path_NM, -[if test -n "$NM"; then - # Let the user override the test. - lt_cv_path_NM="$NM" -else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do - test -z "$ac_dir" && ac_dir=. - tmp_nm=$ac_dir/${ac_tool_prefix}nm - if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then - # Check to see if the nm accepts a BSD-compat flag. - # Adding the `sed 1q' prevents false positives on HP-UX, which says: - # nm: unknown option "B" ignored - # Tru64's nm complains that /dev/null is an invalid object file - if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then - lt_cv_path_NM="$tmp_nm -B" - break - elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then - lt_cv_path_NM="$tmp_nm -p" - break +# +# Do we need to explicitly link libc? +# +case "x$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)" in +x|xyes) + # Assume -lc should be added + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes + + if test "$enable_shared" = yes && test "$GCC" = yes; then + case $_LT_AC_TAGVAR(archive_cmds, $1) in + *'~'*) + # FIXME: we may have to deal with multi-command sequences. + ;; + '$CC '*) + # Test whether the compiler implicitly links with -lc since on some + # systems, -lgcc has to come before -lc. If gcc already passes -lc + # to ld, don't add -lc before -lgcc. + AC_MSG_CHECKING([whether -lc should be explicitly linked in]) + $rm conftest* + printf "$lt_simple_compile_test_code" > conftest.$ac_ext + + if AC_TRY_EVAL(ac_compile) 2>conftest.err; then + soname=conftest + lib=conftest + libobjs=conftest.$ac_objext + deplibs= + wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) + compiler_flags=-v + linker_flags=-v + verstring= + output_objdir=. + libname=conftest + lt_save_allow_undefined_flag=$_LT_AC_TAGVAR(allow_undefined_flag, $1) + _LT_AC_TAGVAR(allow_undefined_flag, $1)= + if AC_TRY_EVAL(_LT_AC_TAGVAR(archive_cmds, $1) 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) + then + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no + else + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes + fi + _LT_AC_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag else - lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but - continue # so that we can try to find one that supports BSD flags + cat conftest.err 1>&5 fi - fi - done - IFS="$ac_save_ifs" - test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm -fi]) -NM="$lt_cv_path_NM" -AC_MSG_RESULT([$NM]) -]) - -# AC_CHECK_LIBM - check for math library -AC_DEFUN([AC_CHECK_LIBM], -[AC_REQUIRE([AC_CANONICAL_HOST])dnl -LIBM= -case $host in -*-*-beos* | *-*-cygwin* | *-*-pw32*) - # These system don't have libm - ;; -*-ncr-sysv4.3*) - AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw") - AC_CHECK_LIB(m, main, LIBM="$LIBM -lm") - ;; -*) - AC_CHECK_LIB(m, main, LIBM="-lm") + $rm conftest* + AC_MSG_RESULT([$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)]) + ;; + esac + fi ;; esac -]) +])# AC_LIBTOOL_PROG_LD_SHLIBS -# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for -# the libltdl convenience library and INCLTDL to the include flags for -# the libltdl header and adds --enable-ltdl-convenience to the -# configure arguments. Note that LIBLTDL and INCLTDL are not -# AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If DIR is not -# provided, it is assumed to be `libltdl'. LIBLTDL will be prefixed -# with '${top_builddir}/' and INCLTDL will be prefixed with -# '${top_srcdir}/' (note the single quotes!). If your package is not -# flat and you're not using automake, define top_builddir and -# top_srcdir appropriately in the Makefiles. -AC_DEFUN([AC_LIBLTDL_CONVENIENCE], -[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl - case $enable_ltdl_convenience in - no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;; - "") enable_ltdl_convenience=yes - ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;; - esac - LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la - INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) -]) -# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for -# the libltdl installable library and INCLTDL to the include flags for -# the libltdl header and adds --enable-ltdl-install to the configure -# arguments. Note that LIBLTDL and INCLTDL are not AC_SUBSTed, nor is -# AC_CONFIG_SUBDIRS called. If DIR is not provided and an installed -# libltdl is not found, it is assumed to be `libltdl'. LIBLTDL will -# be prefixed with '${top_builddir}/' and INCLTDL will be prefixed -# with '${top_srcdir}/' (note the single quotes!). If your package is -# not flat and you're not using automake, define top_builddir and -# top_srcdir appropriately in the Makefiles. -# In the future, this macro may have to be called after AC_PROG_LIBTOOL. -AC_DEFUN([AC_LIBLTDL_INSTALLABLE], -[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl - AC_CHECK_LIB(ltdl, main, - [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no], - [if test x"$enable_ltdl_install" = xno; then - AC_MSG_WARN([libltdl not installed, but installation disabled]) - else - enable_ltdl_install=yes - fi - ]) - if test x"$enable_ltdl_install" = x"yes"; then - ac_configure_args="$ac_configure_args --enable-ltdl-install" - LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la - INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) - else - ac_configure_args="$ac_configure_args --enable-ltdl-install=no" - LIBLTDL="-lltdl" - INCLTDL= - fi -]) +# _LT_AC_FILE_LTDLL_C +# ------------------- +# Be careful that the start marker always follows a newline. +AC_DEFUN([_LT_AC_FILE_LTDLL_C], [ +# /* ltdll.c starts here */ +# #define WIN32_LEAN_AND_MEAN +# #include +# #undef WIN32_LEAN_AND_MEAN +# #include +# +# #ifndef __CYGWIN__ +# # ifdef __CYGWIN32__ +# # define __CYGWIN__ __CYGWIN32__ +# # endif +# #endif +# +# #ifdef __cplusplus +# extern "C" { +# #endif +# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved); +# #ifdef __cplusplus +# } +# #endif +# +# #ifdef __CYGWIN__ +# #include +# DECLARE_CYGWIN_DLL( DllMain ); +# #endif +# HINSTANCE __hDllInstance_base; +# +# BOOL APIENTRY +# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved) +# { +# __hDllInstance_base = hInst; +# return TRUE; +# } +# /* ltdll.c ends here */ +])# _LT_AC_FILE_LTDLL_C + + +# _LT_AC_TAGVAR(VARNAME, [TAGNAME]) +# --------------------------------- +AC_DEFUN([_LT_AC_TAGVAR], [ifelse([$2], [], [$1], [$1_$2])]) + # old names AC_DEFUN([AM_PROG_LIBTOOL], [AC_PROG_LIBTOOL]) @@ -4326,3 +6809,87 @@ # This is just to silence aclocal about the macro not being used ifelse([AC_DISABLE_FAST_INSTALL]) +AC_DEFUN([LT_AC_PROG_GCJ], +[AC_CHECK_TOOL(GCJ, gcj, no) + test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2" + AC_SUBST(GCJFLAGS) +]) + +AC_DEFUN([LT_AC_PROG_RC], +[AC_CHECK_TOOL(RC, windres, no) +]) + +# NOTE: This macro has been submitted for inclusion into # +# GNU Autoconf as AC_PROG_SED. When it is available in # +# a released version of Autoconf we should remove this # +# macro and use it instead. # +# LT_AC_PROG_SED +# -------------- +# Check for a fully-functional sed program, that truncates +# as few characters as possible. Prefer GNU sed if found. +AC_DEFUN([LT_AC_PROG_SED], +[AC_MSG_CHECKING([for a sed that does not truncate output]) +AC_CACHE_VAL(lt_cv_path_SED, +[# Loop through the user's path and test for sed and gsed. +# Then use that list of sed's as ones to test for truncation. +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for lt_ac_prog in sed gsed; do + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then + lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext" + fi + done + done +done +lt_ac_max=0 +lt_ac_count=0 +# Add /usr/xpg4/bin/sed as it is typically found on Solaris +# along with /bin/sed that truncates output. +for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do + test ! -f $lt_ac_sed && break + cat /dev/null > conftest.in + lt_ac_count=0 + echo $ECHO_N "0123456789$ECHO_C" >conftest.in + # Check for GNU sed and select it if it is found. + if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then + lt_cv_path_SED=$lt_ac_sed + break + fi + while true; do + cat conftest.in conftest.in >conftest.tmp + mv conftest.tmp conftest.in + cp conftest.in conftest.nl + echo >>conftest.nl + $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break + cmp -s conftest.out conftest.nl || break + # 10000 chars as input seems more than enough + test $lt_ac_count -gt 10 && break + lt_ac_count=`expr $lt_ac_count + 1` + if test $lt_ac_count -gt $lt_ac_max; then + lt_ac_max=$lt_ac_count + lt_cv_path_SED=$lt_ac_sed + fi + done +done +SED=$lt_cv_path_SED +]) +AC_MSG_RESULT([$SED]) +]) + +# Define a conditional. + +AC_DEFUN([AM_CONDITIONAL], +[AC_SUBST($1_TRUE) +AC_SUBST($1_FALSE) +if $2; then + $1_TRUE= + $1_FALSE='#' +else + $1_TRUE='#' + $1_FALSE= +fi]) + --- tse3-0.2.7.orig/ltmain.sh +++ tse3-0.2.7/ltmain.sh @@ -1,7 +1,7 @@ # ltmain.sh - Provide generalized library-building support services. # NOTE: Changing this file will not affect anything until you rerun configure. # -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001 +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004 # Free Software Foundation, Inc. # Originally by Gordon Matzigkeit , 1996 # @@ -24,6 +24,29 @@ # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. +basename="s,^.*/,,g" + +# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh +# is ksh but when the shell is invoked as "sh" and the current value of +# the _XPG environment variable is not equal to 1 (one), the special +# positional parameter $0, within a function call, is the name of the +# function. +progpath="$0" + +# The name of this program: +progname=`echo "$progpath" | $SED $basename` +modename="$progname" + +# Global variables: +EXIT_SUCCESS=0 +EXIT_FAILURE=1 + +PROGRAM=ltmain.sh +PACKAGE=libtool +VERSION=1.5.6 +TIMESTAMP=" (1.1220.2.95 2004/04/11 05:50:42) Debian$Rev: 203 $" + + # Check that we have a working $echo. if test "X$1" = X--no-reexec; then # Discard the --no-reexec flag, and continue. @@ -36,7 +59,7 @@ : else # Restart under the correct shell, and then maybe $echo will work. - exec $SHELL "$0" --no-reexec ${1+"$@"} + exec $SHELL "$progpath" --no-reexec ${1+"$@"} fi if test "X$1" = X--fallback-echo; then @@ -45,19 +68,9 @@ cat <&2 - echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 - exit 1 + $echo "$modename: not configured to build any kind of library" 1>&2 + $echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 + exit $EXIT_FAILURE fi # Global variables. @@ -105,8 +128,121 @@ lo2o="s/\\.lo\$/.${objext}/" o2lo="s/\\.${objext}\$/.lo/" +##################################### +# Shell function definitions: +# This seems to be the best place for them + +# func_win32_libid arg +# return the library type of file 'arg' +# +# Need a lot of goo to handle *both* DLLs and import libs +# Has to be a shell function in order to 'eat' the argument +# that is supplied when $file_magic_command is called. +func_win32_libid () { + win32_libid_type="unknown" + win32_fileres=`file -L $1 2>/dev/null` + case $win32_fileres in + *ar\ archive\ import\ library*) # definitely import + win32_libid_type="x86 archive import" + ;; + *ar\ archive*) # could be an import, or static + if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | \ + $EGREP -e 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then + win32_nmres=`eval $NM -f posix -A $1 | \ + sed -n -e '1,100{/ I /{x;/import/!{s/^/import/;h;p;};x;};}'` + if test "X$win32_nmres" = "Ximport" ; then + win32_libid_type="x86 archive import" + else + win32_libid_type="x86 archive static" + fi + fi + ;; + *DLL*) + win32_libid_type="x86 DLL" + ;; + *executable*) # but shell scripts are "executable" too... + case $win32_fileres in + *MS\ Windows\ PE\ Intel*) + win32_libid_type="x86 DLL" + ;; + esac + ;; + esac + $echo $win32_libid_type +} + + +# func_infer_tag arg +# Infer tagged configuration to use if any are available and +# if one wasn't chosen via the "--tag" command line option. +# Only attempt this if the compiler in the base compile +# command doesn't match the default compiler. +# arg is usually of the form 'gcc ...' +func_infer_tag () { + if test -n "$available_tags" && test -z "$tagname"; then + CC_quoted= + for arg in $CC; do + case $arg in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + arg="\"$arg\"" + ;; + esac + CC_quoted="$CC_quoted $arg" + done + case $@ in + # Blanks in the command may have been stripped by the calling shell, + # but not from the CC environment variable when configure was run. + " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*) ;; + # Blanks at the start of $base_compile will cause this to fail + # if we don't check for them as well. + *) + for z in $available_tags; do + if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then + # Evaluate the configuration. + eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`" + CC_quoted= + for arg in $CC; do + # Double-quote args containing other shell metacharacters. + case $arg in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + arg="\"$arg\"" + ;; + esac + CC_quoted="$CC_quoted $arg" + done + case "$@ " in + " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*) + # The compiler in the base compile command matches + # the one in the tagged configuration. + # Assume this is the tagged configuration we want. + tagname=$z + break + ;; + esac + fi + done + # If $tagname still isn't set, then no tagged configuration + # was found and let the user know that the "--tag" command + # line option must be used. + if test -z "$tagname"; then + $echo "$modename: unable to infer tagged configuration" + $echo "$modename: specify a tag with \`--tag'" 1>&2 + exit $EXIT_FAILURE +# else +# $echo "$modename: using $tagname tagged configuration" + fi + ;; + esac + fi +} +# End of Shell function definitions +##################################### + +# Darwin sucks +eval std_shrext=\"$shrext_cmds\" + # Parse our command line options once, thoroughly. -while test $# -gt 0 +while test "$#" -gt 0 do arg="$1" shift @@ -122,6 +258,34 @@ execute_dlfiles) execute_dlfiles="$execute_dlfiles $arg" ;; + tag) + tagname="$arg" + preserve_args="${preserve_args}=$arg" + + # Check whether tagname contains only valid characters + case $tagname in + *[!-_A-Za-z0-9,/]*) + $echo "$progname: invalid tag name: $tagname" 1>&2 + exit $EXIT_FAILURE + ;; + esac + + case $tagname in + CC) + # Don't test for the "default" C tag, as we know, it's there, but + # not specially marked. + ;; + *) + if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "$progpath" > /dev/null; then + taglist="$taglist $tagname" + # Evaluate the configuration. + eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$tagname'$/,/^# ### END LIBTOOL TAG CONFIG: '$tagname'$/p' < $progpath`" + else + $echo "$progname: ignoring unknown tag $tagname" 1>&2 + fi + ;; + esac + ;; *) eval "$prev=\$arg" ;; @@ -139,18 +303,27 @@ ;; --version) - echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP" - exit 0 + $echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP" + $echo + $echo "Copyright (C) 2003 Free Software Foundation, Inc." + $echo "This is free software; see the source for copying conditions. There is NO" + $echo "warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." + exit $EXIT_SUCCESS ;; --config) - sed -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $0 - exit 0 + ${SED} -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $progpath + # Now print the configurations for the tags. + for tagname in $taglist; do + ${SED} -n -e "/^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$/,/^# ### END LIBTOOL TAG CONFIG: $tagname$/p" < "$progpath" + done + exit $EXIT_SUCCESS ;; --debug) - echo "$progname: enabling shell trace mode" + $echo "$progname: enabling shell trace mode" set -x + preserve_args="$preserve_args $arg" ;; --dry-run | -n) @@ -158,18 +331,18 @@ ;; --features) - echo "host: $host" + $echo "host: $host" if test "$build_libtool_libs" = yes; then - echo "enable shared libraries" + $echo "enable shared libraries" else - echo "disable shared libraries" + $echo "disable shared libraries" fi if test "$build_old_libs" = yes; then - echo "enable static libraries" + $echo "enable static libraries" else - echo "disable static libraries" + $echo "disable static libraries" fi - exit 0 + exit $EXIT_SUCCESS ;; --finish) mode="finish" ;; @@ -177,8 +350,19 @@ --mode) prevopt="--mode" prev=mode ;; --mode=*) mode="$optarg" ;; + --preserve-dup-deps) duplicate_deps="yes" ;; + --quiet | --silent) show=: + preserve_args="$preserve_args $arg" + ;; + + --tag) prevopt="--tag" prev=tag ;; + --tag=*) + set tag "$optarg" ${1+"$@"} + shift + prev=tag + preserve_args="$preserve_args --tag" ;; -dlopen) @@ -189,7 +373,7 @@ -*) $echo "$modename: unrecognized option \`$arg'" 1>&2 $echo "$help" 1>&2 - exit 1 + exit $EXIT_FAILURE ;; *) @@ -202,7 +386,7 @@ if test -n "$prevopt"; then $echo "$modename: option \`$prevopt' requires an argument" 1>&2 $echo "$help" 1>&2 - exit 1 + exit $EXIT_FAILURE fi # If this variable is set in any of the actions, the command in it @@ -214,8 +398,10 @@ # Infer the operation mode. if test -z "$mode"; then + $echo "*** Warning: inferring the mode of operation is deprecated." 1>&2 + $echo "*** Future versions of Libtool will require -mode=MODE be specified." 1>&2 case $nonopt in - *cc | *++ | gcc* | *-gcc*) + *cc | cc* | *++ | gcc* | *-gcc* | g++* | xlc*) mode=link for arg do @@ -256,7 +442,7 @@ if test -n "$execute_dlfiles" && test "$mode" != execute; then $echo "$modename: unrecognized option \`-dlopen'" 1>&2 $echo "$help" 1>&2 - exit 1 + exit $EXIT_FAILURE fi # Change the help message to a mode-specific one. @@ -270,158 +456,124 @@ modename="$modename: compile" # Get the compilation command and the source file. base_compile= - prev= - lastarg= - srcfile="$nonopt" + srcfile="$nonopt" # always keep a non-empty value in "srcfile" + suppress_opt=yes suppress_output= + arg_mode=normal + libobj= + later= - user_target=no for arg do - case $prev in - "") ;; - xcompiler) - # Aesthetically quote the previous argument. - prev= - lastarg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` - - case $arg in - # Double-quote args containing other shell metacharacters. - # Many Bourne shells cannot handle close brackets correctly - # in scan sets, so we specify it separately. - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - arg="\"$arg\"" - ;; - esac - - # Add the previous argument to base_compile. - if test -z "$base_compile"; then - base_compile="$lastarg" - else - base_compile="$base_compile $lastarg" - fi - continue - ;; - esac - - # Accept any command-line options. - case $arg in - -o) - if test "$user_target" != "no"; then - $echo "$modename: you cannot specify \`-o' more than once" 1>&2 - exit 1 - fi - user_target=next + case "$arg_mode" in + arg ) + # do not "continue". Instead, add this to base_compile + lastarg="$arg" + arg_mode=normal ;; - -static) - build_old_libs=yes + target ) + libobj="$arg" + arg_mode=normal continue ;; - -prefer-pic) - pic_mode=yes - continue - ;; + normal ) + # Accept any command-line options. + case $arg in + -o) + if test -n "$libobj" ; then + $echo "$modename: you cannot specify \`-o' more than once" 1>&2 + exit $EXIT_FAILURE + fi + arg_mode=target + continue + ;; - -prefer-non-pic) - pic_mode=no - continue - ;; + -static | -prefer-pic | -prefer-non-pic) + later="$later $arg" + continue + ;; - -Xcompiler) - prev=xcompiler - continue - ;; + -no-suppress) + suppress_opt=no + continue + ;; - -Wc,*) - args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"` - lastarg= - save_ifs="$IFS"; IFS=',' - for arg in $args; do - IFS="$save_ifs" + -Xcompiler) + arg_mode=arg # the next one goes into the "base_compile" arg list + continue # The current "srcfile" will either be retained or + ;; # replaced later. I would guess that would be a bug. + + -Wc,*) + args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"` + lastarg= + save_ifs="$IFS"; IFS=',' + for arg in $args; do + IFS="$save_ifs" - # Double-quote args containing other shell metacharacters. - # Many Bourne shells cannot handle close brackets correctly - # in scan sets, so we specify it separately. - case $arg in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - arg="\"$arg\"" - ;; - esac - lastarg="$lastarg $arg" - done - IFS="$save_ifs" - lastarg=`$echo "X$lastarg" | $Xsed -e "s/^ //"` + # Double-quote args containing other shell metacharacters. + # Many Bourne shells cannot handle close brackets correctly + # in scan sets, so we specify it separately. + case $arg in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + arg="\"$arg\"" + ;; + esac + lastarg="$lastarg $arg" + done + IFS="$save_ifs" + lastarg=`$echo "X$lastarg" | $Xsed -e "s/^ //"` - # Add the arguments to base_compile. - if test -z "$base_compile"; then - base_compile="$lastarg" - else + # Add the arguments to base_compile. base_compile="$base_compile $lastarg" - fi - continue - ;; - esac + continue + ;; - case $user_target in - next) - # The next one is the -o target name - user_target=yes - continue - ;; - yes) - # We got the output file - user_target=set - libobj="$arg" - continue + * ) + # Accept the current argument as the source file. + # The previous "srcfile" becomes the current argument. + # + lastarg="$srcfile" + srcfile="$arg" + ;; + esac # case $arg ;; - esac - - # Accept the current argument as the source file. - lastarg="$srcfile" - srcfile="$arg" + esac # case $arg_mode # Aesthetically quote the previous argument. - - # Backslashify any backslashes, double quotes, and dollar signs. - # These are the only characters that are still specially - # interpreted inside of double-quoted scrings. lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"` + case $lastarg in # Double-quote args containing other shell metacharacters. # Many Bourne shells cannot handle close brackets correctly # in scan sets, so we specify it separately. - case $lastarg in *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") lastarg="\"$lastarg\"" ;; esac - # Add the previous argument to base_compile. - if test -z "$base_compile"; then - base_compile="$lastarg" - else - base_compile="$base_compile $lastarg" - fi - done + base_compile="$base_compile $lastarg" + done # for arg - case $user_target in - set) + case $arg_mode in + arg) + $echo "$modename: you must specify an argument for -Xcompile" + exit $EXIT_FAILURE ;; - no) - # Get the name of the library object. - libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'` + target) + $echo "$modename: you must specify a target with \`-o'" 1>&2 + exit $EXIT_FAILURE ;; *) - $echo "$modename: you must specify a target with \`-o'" 1>&2 - exit 1 + # Get the name of the library object. + [ -z "$libobj" ] && libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'` ;; esac # Recognize several different file suffixes. # If the user specifies -o file.o, it is replaced with file.lo - xform='[cCFSfmso]' + xform='[cCFSifmso]' case $libobj in *.ada) xform=ada ;; *.adb) xform=adb ;; @@ -429,10 +581,13 @@ *.asm) xform=asm ;; *.c++) xform=c++ ;; *.cc) xform=cc ;; + *.ii) xform=ii ;; + *.class) xform=class ;; *.cpp) xform=cpp ;; *.cxx) xform=cxx ;; *.f90) xform=f90 ;; *.for) xform=for ;; + *.java) xform=java ;; esac libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"` @@ -441,25 +596,55 @@ *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;; *) $echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2 - exit 1 + exit $EXIT_FAILURE ;; esac + func_infer_tag $base_compile + + for arg in $later; do + case $arg in + -static) + build_old_libs=yes + continue + ;; + + -prefer-pic) + pic_mode=yes + continue + ;; + + -prefer-non-pic) + pic_mode=no + continue + ;; + esac + done + + objname=`$echo "X$obj" | $Xsed -e 's%^.*/%%'` + xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'` + if test "X$xdir" = "X$obj"; then + xdir= + else + xdir=$xdir/ + fi + lobj=${xdir}$objdir/$objname + if test -z "$base_compile"; then $echo "$modename: you must specify a compilation command" 1>&2 $echo "$help" 1>&2 - exit 1 + exit $EXIT_FAILURE fi # Delete any leftover library objects. if test "$build_old_libs" = yes; then - removelist="$obj $libobj" + removelist="$obj $lobj $libobj ${libobj}T" else - removelist="$libobj" + removelist="$lobj $libobj ${libobj}T" fi $run $rm $removelist - trap "$run $rm $removelist; exit 1" 1 2 15 + trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15 # On Cygwin there's no "real" PIC flag so we must build both object types case $host_os in @@ -478,8 +663,9 @@ output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext} lockfile="$output_obj.lock" removelist="$removelist $output_obj $lockfile" - trap "$run $rm $removelist; exit 1" 1 2 15 + trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15 else + output_obj= need_locks=no lockfile= fi @@ -487,13 +673,13 @@ # Lock this critical section if it is needed # We use this script file to make the link, it avoids creating a new file if test "$need_locks" = yes; then - until $run ln "$0" "$lockfile" 2>/dev/null; do + until $run ln "$progpath" "$lockfile" 2>/dev/null; do $show "Waiting for $lockfile to be removed" sleep 2 done elif test "$need_locks" = warn; then if test -f "$lockfile"; then - echo "\ + $echo "\ *** ERROR, $lockfile exists and contains: `cat $lockfile 2>/dev/null` @@ -505,68 +691,67 @@ compiler." $run $rm $removelist - exit 1 + exit $EXIT_FAILURE fi - echo $srcfile > "$lockfile" + $echo $srcfile > "$lockfile" fi if test -n "$fix_srcfile_path"; then eval srcfile=\"$fix_srcfile_path\" fi + $run $rm "$libobj" "${libobj}T" + + # Create a libtool object file (analogous to a ".la" file), + # but don't create it if we're doing a dry run. + test -z "$run" && cat > ${libobj}T </dev/null`" != x"$srcfile"; then - echo "\ + test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then + $echo "\ *** ERROR, $lockfile contains: `cat $lockfile 2>/dev/null` @@ -581,13 +766,13 @@ compiler." $run $rm $removelist - exit 1 + exit $EXIT_FAILURE fi # Just move the object if needed, then go on to compile the next one - if test x"$output_obj" != x"$libobj"; then - $show "$mv $output_obj $libobj" - if $run $mv $output_obj $libobj; then : + if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then + $show "$mv $output_obj $lobj" + if $run $mv $output_obj $lobj; then : else error=$? $run $rm $removelist @@ -595,48 +780,23 @@ fi fi - # If we have no pic_flag, then copy the object into place and finish. - if (test -z "$pic_flag" || test "$pic_mode" != default) && - test "$build_old_libs" = yes; then - # Rename the .lo from within objdir to obj - if test -f $obj; then - $show $rm $obj - $run $rm $obj - fi + # Append the name of the PIC object to the libtool object file. + test -z "$run" && cat >> ${libobj}T <> ${libobj}T </dev/null`" != x"$srcfile"; then - echo "\ + test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then + $echo "\ *** ERROR, $lockfile contains: `cat $lockfile 2>/dev/null` @@ -680,11 +838,11 @@ compiler." $run $rm $removelist - exit 1 + exit $EXIT_FAILURE fi # Just move the object if needed - if test x"$output_obj" != x"$obj"; then + if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then $show "$mv $output_obj $obj" if $run $mv $output_obj $obj; then : else @@ -694,29 +852,31 @@ fi fi - # Create an invalid libtool object if no PIC, so that we do not - # accidentally link it into a program. - if test "$build_libtool_libs" != yes; then - $show "echo timestamp > $libobj" - $run eval "echo timestamp > \$libobj" || exit $? - else - # Move the .lo from within objdir - $show "$mv $libobj $lo_libobj" - if $run $mv $libobj $lo_libobj; then : - else - error=$? - $run $rm $removelist - exit $error - fi - fi + # Append the name of the non-PIC object the libtool object file. + # Only append if the libtool object file exists. + test -z "$run" && cat >> ${libobj}T <> ${libobj}T </dev/null 2>&1; then + pic_object= + non_pic_object= + + # Read the .lo file + # If there is no directory component, then add one. + case $arg in + */* | *\\*) . $arg ;; + *) . ./$arg ;; + esac + + if test -z "$pic_object" || \ + test -z "$non_pic_object" || + test "$pic_object" = none && \ + test "$non_pic_object" = none; then + $echo "$modename: cannot find name of object for \`$arg'" 1>&2 + exit $EXIT_FAILURE + fi + + # Extract subdirectory from the argument. + xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` + if test "X$xdir" = "X$arg"; then + xdir= + else + xdir="$xdir/" + fi + + if test "$pic_object" != none; then + # Prepend the subdirectory the object is found in. + pic_object="$xdir$pic_object" + + if test "$prev" = dlfiles; then + if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then + dlfiles="$dlfiles $pic_object" + prev= + continue + else + # If libtool objects are unsupported, then we need to preload. + prev=dlprefiles + fi + fi + + # CHECK ME: I think I busted this. -Ossama + if test "$prev" = dlprefiles; then + # Preload the old-style object. + dlprefiles="$dlprefiles $pic_object" + prev= + fi + + # A PIC object. + libobjs="$libobjs $pic_object" + arg="$pic_object" + fi + + # Non-PIC object. + if test "$non_pic_object" != none; then + # Prepend the subdirectory the object is found in. + non_pic_object="$xdir$non_pic_object" + + # A standard non-PIC object + non_pic_objects="$non_pic_objects $non_pic_object" + if test -z "$pic_object" || test "$pic_object" = none ; then + arg="$non_pic_object" + fi + fi + else + # Only an error if not doing a dry-run. + if test -z "$run"; then + $echo "$modename: \`$arg' is not a valid libtool object" 1>&2 + exit $EXIT_FAILURE + else + # Dry-run case. + + # Extract subdirectory from the argument. + xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` + if test "X$xdir" = "X$arg"; then + xdir= + else + xdir="$xdir/" + fi + + pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"` + non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"` + libobjs="$libobjs $pic_object" + non_pic_objects="$non_pic_objects $non_pic_object" + fi + fi + done + else + $echo "$modename: link input file \`$save_arg' does not exist" + exit $EXIT_FAILURE + fi + arg=$save_arg + prev= + continue + ;; rpath | xrpath) # We need an absolute path. case $arg in [\\/]* | [A-Za-z]:[\\/]*) ;; *) $echo "$modename: only absolute run-paths are allowed" 1>&2 - exit 1 + exit $EXIT_FAILURE ;; esac if test "$prev" = rpath; then @@ -930,13 +1214,26 @@ finalize_command="$finalize_command $wl$qarg" continue ;; + xcclinker) + linker_flags="$linker_flags $qarg" + compiler_flags="$compiler_flags $qarg" + prev= + compile_command="$compile_command $qarg" + finalize_command="$finalize_command $qarg" + continue + ;; + shrext) + shrext_cmds="$arg" + prev= + continue + ;; *) eval "$prev=\"\$arg\"" prev= continue ;; esac - fi # test -n $prev + fi # test -n "$prev" prevarg="$arg" @@ -978,7 +1275,7 @@ -export-symbols | -export-symbols-regex) if test -n "$export_symbols" || test -n "$export_symbols_regex"; then $echo "$modename: more than one -exported-symbols argument is not allowed" - exit 1 + exit $EXIT_FAILURE fi if test "X$arg" = "X-export-symbols"; then prev=expsyms @@ -988,11 +1285,16 @@ continue ;; + -inst-prefix-dir) + prev=inst_prefix + continue + ;; + # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:* # so, if we see these flags be careful not to treat them like -L -L[A-Z][A-Z]*:*) case $with_gcc/$host in - no/*-*-irix*) + no/*-*-irix* | /*-*-irix*) compile_command="$compile_command $arg" finalize_command="$finalize_command $arg" ;; @@ -1009,7 +1311,7 @@ absdir=`cd "$dir" && pwd` if test -z "$absdir"; then $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2 - exit 1 + exit $EXIT_FAILURE fi dir="$absdir" ;; @@ -1043,28 +1345,65 @@ # These systems don't actually have a C library (as such) test "X$arg" = "X-lc" && continue ;; - *-*-openbsd*) + *-*-openbsd* | *-*-freebsd*) # Do not include libc due to us having libc/libc_r. test "X$arg" = "X-lc" && continue ;; - esac - elif test "X$arg" = "X-lc_r"; then - case $host in - *-*-openbsd*) - # Do not include libc_r directly, use -pthread flag. + *-*-rhapsody* | *-*-darwin1.[012]) + # Rhapsody C and math libraries are in the System framework + deplibs="$deplibs -framework System" continue - ;; esac + elif test "X$arg" = "X-lc_r"; then + case $host in + *-*-openbsd* | *-*-freebsd*) + # Do not include libc_r directly, use -pthread flag. + continue + ;; + esac fi deplibs="$deplibs $arg" continue ;; + -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe) + deplibs="$deplibs $arg" + continue + ;; + -module) module=yes continue ;; + # gcc -m* arguments should be passed to the linker via $compiler_flags + # in order to pass architecture information to the linker + # (e.g. 32 vs 64-bit). This may also be accomplished via -Wl,-mfoo + # but this is not reliable with gcc because gcc may use -mfoo to + # select a different linker, different libraries, etc, while + # -Wl,-mfoo simply passes -mfoo to the linker. + -m*) + # Unknown arguments in both finalize_command and compile_command need + # to be aesthetically quoted because they are evaled later. + arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` + case $arg in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + arg="\"$arg\"" + ;; + esac + compile_command="$compile_command $arg" + finalize_command="$finalize_command $arg" + if test "$with_gcc" = "yes" ; then + compiler_flags="$compiler_flags $arg" + fi + continue + ;; + + -shrext) + prev=shrext + continue + ;; + -no-fast-install) fast_install=no continue @@ -1089,8 +1428,18 @@ continue ;; + -objectlist) + prev=objectlist + continue + ;; + -o) prev=output ;; + -precious-files-regex) + prev=precious_regex + continue + ;; + -release) prev=release continue @@ -1113,7 +1462,7 @@ [\\/]* | [A-Za-z]:[\\/]*) ;; *) $echo "$modename: only absolute run-paths are allowed" 1>&2 - exit 1 + exit $EXIT_FAILURE ;; esac case "$xrpath " in @@ -1141,6 +1490,11 @@ prev=vinfo continue ;; + -version-number) + prev=vinfo + vinfo_number=yes + continue + ;; -Wc,*) args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wc,//'` @@ -1189,6 +1543,11 @@ continue ;; + -XCClinker) + prev=xcclinker + continue + ;; + # Some other compiler flag. -* | +*) # Unknown arguments in both finalize_command and compile_command need @@ -1201,29 +1560,101 @@ esac ;; - *.lo | *.$objext) - # A library or standard object. - if test "$prev" = dlfiles; then - # This file was specified with -dlopen. - if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then - dlfiles="$dlfiles $arg" - prev= - continue - else - # If libtool objects are unsupported, then we need to preload. - prev=dlprefiles - fi - fi + *.$objext) + # A standard object. + objs="$objs $arg" + ;; - if test "$prev" = dlprefiles; then - # Preload the old-style object. - dlprefiles="$dlprefiles "`$echo "X$arg" | $Xsed -e "$lo2o"` - prev= - else + *.lo) + # A libtool-controlled object. + + # Check to see that this really is a libtool object. + if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then + pic_object= + non_pic_object= + + # Read the .lo file + # If there is no directory component, then add one. case $arg in - *.lo) libobjs="$libobjs $arg" ;; - *) objs="$objs $arg" ;; + */* | *\\*) . $arg ;; + *) . ./$arg ;; esac + + if test -z "$pic_object" || \ + test -z "$non_pic_object" || + test "$pic_object" = none && \ + test "$non_pic_object" = none; then + $echo "$modename: cannot find name of object for \`$arg'" 1>&2 + exit $EXIT_FAILURE + fi + + # Extract subdirectory from the argument. + xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` + if test "X$xdir" = "X$arg"; then + xdir= + else + xdir="$xdir/" + fi + + if test "$pic_object" != none; then + # Prepend the subdirectory the object is found in. + pic_object="$xdir$pic_object" + + if test "$prev" = dlfiles; then + if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then + dlfiles="$dlfiles $pic_object" + prev= + continue + else + # If libtool objects are unsupported, then we need to preload. + prev=dlprefiles + fi + fi + + # CHECK ME: I think I busted this. -Ossama + if test "$prev" = dlprefiles; then + # Preload the old-style object. + dlprefiles="$dlprefiles $pic_object" + prev= + fi + + # A PIC object. + libobjs="$libobjs $pic_object" + arg="$pic_object" + fi + + # Non-PIC object. + if test "$non_pic_object" != none; then + # Prepend the subdirectory the object is found in. + non_pic_object="$xdir$non_pic_object" + + # A standard non-PIC object + non_pic_objects="$non_pic_objects $non_pic_object" + if test -z "$pic_object" || test "$pic_object" = none ; then + arg="$non_pic_object" + fi + fi + else + # Only an error if not doing a dry-run. + if test -z "$run"; then + $echo "$modename: \`$arg' is not a valid libtool object" 1>&2 + exit $EXIT_FAILURE + else + # Dry-run case. + + # Extract subdirectory from the argument. + xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` + if test "X$xdir" = "X$arg"; then + xdir= + else + xdir="$xdir/" + fi + + pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"` + non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"` + libobjs="$libobjs $pic_object" + non_pic_objects="$non_pic_objects $non_pic_object" + fi fi ;; @@ -1274,7 +1705,7 @@ if test -n "$prev"; then $echo "$modename: the \`$prevarg' option requires an argument" 1>&2 $echo "$help" 1>&2 - exit 1 + exit $EXIT_FAILURE fi if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then @@ -1283,6 +1714,7 @@ finalize_command="$finalize_command $arg" fi + oldlibs= # calculate the name of the file, without its directory outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'` libobjs_save="$libobjs" @@ -1317,7 +1749,7 @@ "") $echo "$modename: you must specify an output file" 1>&2 $echo "$help" 1>&2 - exit 1 + exit $EXIT_FAILURE ;; *.$libext) linkmode=oldlib ;; *.lo | *.$objext) linkmode=obj ;; @@ -1325,16 +1757,47 @@ *) linkmode=prog ;; # Anything else should be a program. esac + case $host in + *cygwin* | *mingw* | *pw32*) + # don't eliminate duplications in $postdeps and $predeps + duplicate_compiler_generated_deps=yes + ;; + *) + duplicate_compiler_generated_deps=$duplicate_deps + ;; + esac specialdeplibs= + libs= # Find all interdependent deplibs by searching for libraries # that are linked more than once (e.g. -la -lb -la) for deplib in $deplibs; do - case "$libs " in - *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; - esac + if test "X$duplicate_deps" = "Xyes" ; then + case "$libs " in + *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; + esac + fi libs="$libs $deplib" done + + if test "$linkmode" = lib; then + libs="$predeps $libs $compiler_lib_search_path $postdeps" + + # Compute libraries that are listed more than once in $predeps + # $postdeps and mark them as special (i.e., whose duplicates are + # not to be eliminated). + pre_post_deps= + if test "X$duplicate_compiler_generated_deps" = "Xyes" ; then + for pre_post_dep in $predeps $postdeps; do + case "$pre_post_deps " in + *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;; + esac + pre_post_deps="$pre_post_deps $pre_post_dep" + done + fi + pre_post_deps= + fi + deplibs= newdependency_libs= newlib_search_path= @@ -1349,7 +1812,7 @@ *.la) ;; *) $echo "$modename: libraries can \`-dlopen' only libtool libraries: $file" 1>&2 - exit 1 + exit $EXIT_FAILURE ;; esac done @@ -1366,25 +1829,42 @@ ;; esac for pass in $passes; do + if test "$linkmode,$pass" = "lib,link" || + test "$linkmode,$pass" = "prog,scan"; then + libs="$deplibs" + deplibs= + fi if test "$linkmode" = prog; then - # Determine which files to process case $pass in - dlopen) - libs="$dlfiles" - save_deplibs="$deplibs" # Collect dlpreopened libraries - deplibs= - ;; + dlopen) libs="$dlfiles" ;; dlpreopen) libs="$dlprefiles" ;; - link) libs="$deplibs %DEPLIBS% $dependency_libs" ;; + link) + libs="$deplibs %DEPLIBS%" + test "X$link_all_deplibs" != Xno && libs="$libs $dependency_libs" + ;; esac fi + if test "$pass" = dlopen; then + # Collect dlpreopened libraries + save_deplibs="$deplibs" + deplibs= + fi for deplib in $libs; do lib= found=no case $deplib in + -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe) + if test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + deplibs="$deplib $deplibs" + fi + continue + ;; -l*) - if test "$linkmode" = oldlib && test "$linkmode" = obj; then - $echo "$modename: warning: \`-l' is ignored for archives/objects: $deplib" 1>&2 + if test "$linkmode" != lib && test "$linkmode" != prog; then + $echo "$modename: warning: \`-l' is ignored for archives/objects" 1>&2 continue fi if test "$pass" = conv; then @@ -1393,12 +1873,18 @@ fi name=`$echo "X$deplib" | $Xsed -e 's/^-l//'` for searchdir in $newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path; do - # Search the libtool library - lib="$searchdir/lib${name}.la" - if test -f "$lib"; then - found=yes - break - fi + for search_ext in .la $std_shrext .so .a; do + # Search the libtool library + lib="$searchdir/lib${name}${search_ext}" + if test -f "$lib"; then + if test "$search_ext" = ".la"; then + found=yes + else + found=no + fi + break 2 + fi + done done if test "$found" != yes; then # deplib doesn't seem to be a libtool library @@ -1410,6 +1896,42 @@ test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" fi continue + else # deplib is a libtool library + # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib, + # We need to do some special things here, and not later. + if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + case " $predeps $postdeps " in + *" $deplib "*) + if (${SED} -e '2q' $lib | + grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then + library_names= + old_library= + case $lib in + */* | *\\*) . $lib ;; + *) . ./$lib ;; + esac + for l in $old_library $library_names; do + ll="$l" + done + if test "X$ll" = "X$old_library" ; then # only static version available + found=no + ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'` + test "X$ladir" = "X$lib" && ladir="." + lib=$ladir/$old_library + if test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + deplibs="$deplib $deplibs" + test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" + fi + continue + fi + fi + ;; + *) ;; + esac + fi fi ;; # -l -L*) @@ -1427,14 +1949,14 @@ fi if test "$pass" = scan; then deplibs="$deplib $deplibs" - newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'` else compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" fi + newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'` ;; *) - $echo "$modename: warning: \`-L' is ignored for archives/objects: $deplib" 1>&2 + $echo "$modename: warning: \`-L' is ignored for archives/objects" 1>&2 ;; esac # linkmode continue @@ -1460,15 +1982,17 @@ case $linkmode in lib) if test "$deplibs_check_method" != pass_all; then - echo - echo "*** Warning: This library needs some functionality provided by $deplib." - echo "*** I have the capability to make that library automatically link in when" - echo "*** you link to this library. But I can only do this if you have a" - echo "*** shared version of the library, which you do not appear to have." + $echo + $echo "*** Warning: Trying to link with static lib archive $deplib." + $echo "*** I have the capability to make that library automatically link in when" + $echo "*** you link to this library. But I can only do this if you have a" + $echo "*** shared version of the library, which you do not appear to have" + $echo "*** because the file extensions .$libext of this argument makes me believe" + $echo "*** that it is just a static archive that I should not used here." else - echo - echo "*** Warning: Linking the shared library $output against the" - echo "*** static library $deplib is not portable!" + $echo + $echo "*** Warning: Linking the shared library $output against the" + $echo "*** static library $deplib is not portable!" deplibs="$deplib $deplibs" fi continue @@ -1485,14 +2009,18 @@ esac # linkmode ;; # *.$libext *.lo | *.$objext) - if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then - # If there is no dlopen support or we're linking statically, - # we need to preload. - newdlprefiles="$newdlprefiles $deplib" - compile_deplibs="$deplib $compile_deplibs" - finalize_deplibs="$deplib $finalize_deplibs" - else - newdlfiles="$newdlfiles $deplib" + if test "$pass" = conv; then + deplibs="$deplib $deplibs" + elif test "$linkmode" = prog; then + if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then + # If there is no dlopen support or we're linking statically, + # we need to preload. + newdlprefiles="$newdlprefiles $deplib" + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + newdlfiles="$newdlfiles $deplib" + fi fi continue ;; @@ -1504,14 +2032,14 @@ if test "$found" = yes || test -f "$lib"; then : else $echo "$modename: cannot find the library \`$lib'" 1>&2 - exit 1 + exit $EXIT_FAILURE fi # Check to see that this really is a libtool archive. - if (sed -e '2q' $lib | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : + if (${SED} -e '2q' $lib | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : else $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 - exit 1 + exit $EXIT_FAILURE fi ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'` @@ -1524,8 +2052,9 @@ library_names= old_library= # If the library was installed with an old release of libtool, - # it will not redefine variable installed. + # it will not redefine variables installed, or shouldnotlink installed=yes + shouldnotlink=no # Read the .la file case $lib in @@ -1535,8 +2064,7 @@ if test "$linkmode,$pass" = "lib,link" || test "$linkmode,$pass" = "prog,scan" || - { test "$linkmode" = oldlib && test "$linkmode" = obj; }; then - # Add dl[pre]opened files of deplib + { test "$linkmode" != prog && test "$linkmode" != lib; }; then test -n "$dlopen" && dlfiles="$dlfiles $dlopen" test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen" fi @@ -1547,7 +2075,7 @@ if test -z "$libdir"; then if test -z "$old_library"; then $echo "$modename: cannot find name of link library for \`$lib'" 1>&2 - exit 1 + exit $EXIT_FAILURE fi # It is a libtool convenience library, so add in its objects. convenience="$convenience $ladir/$objdir/$old_library" @@ -1555,18 +2083,21 @@ tmp_libs= for deplib in $dependency_libs; do deplibs="$deplib $deplibs" - case "$tmp_libs " in - *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; - esac + if test "X$duplicate_deps" = "Xyes" ; then + case "$tmp_libs " in + *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; + esac + fi tmp_libs="$tmp_libs $deplib" done elif test "$linkmode" != prog && test "$linkmode" != lib; then $echo "$modename: \`$lib' is not a convenience library" 1>&2 - exit 1 + exit $EXIT_FAILURE fi continue fi # $pass = conv + # Get the name of the library we link against. linklib= for l in $old_library $library_names; do @@ -1574,19 +2105,23 @@ done if test -z "$linklib"; then $echo "$modename: cannot find name of link library for \`$lib'" 1>&2 - exit 1 + exit $EXIT_FAILURE fi # This library was specified with -dlopen. if test "$pass" = dlopen; then if test -z "$libdir"; then $echo "$modename: cannot -dlopen a convenience library: \`$lib'" 1>&2 - exit 1 + exit $EXIT_FAILURE fi - if test -z "$dlname" || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then + if test -z "$dlname" || + test "$dlopen_support" != yes || + test "$build_libtool_libs" = no; then # If there is no dlname, no dlopen support or we're linking - # statically, we need to preload. - dlprefiles="$dlprefiles $lib" + # statically, we need to preload. We also need to preload any + # dependent libraries so libltdl's deplib preloader doesn't + # bomb out in the load deplibs phase. + dlprefiles="$dlprefiles $lib $dependency_libs" else newdlfiles="$newdlfiles $lib" fi @@ -1630,7 +2165,7 @@ if test "$pass" = dlpreopen; then if test -z "$libdir"; then $echo "$modename: cannot -dlpreopen a convenience library: \`$lib'" 1>&2 - exit 1 + exit $EXIT_FAILURE fi # Prefer using a static library (so that no silly _DYNAMIC symbols # are required to link). @@ -1652,11 +2187,12 @@ compile_deplibs="$dir/$old_library $compile_deplibs" finalize_deplibs="$dir/$old_library $finalize_deplibs" else - deplibs="$lib $deplibs" + deplibs="$lib $deplibs" # used for prog,scan pass fi continue fi + if test "$linkmode" = prog && test "$pass" != link; then newlib_search_path="$newlib_search_path $ladir" deplibs="$lib $deplibs" @@ -1680,21 +2216,29 @@ # or/and link against static libraries newdependency_libs="$deplib $newdependency_libs" fi - case "$tmp_libs " in - *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; - esac + if test "X$duplicate_deps" = "Xyes" ; then + case "$tmp_libs " in + *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; + esac + fi tmp_libs="$tmp_libs $deplib" done # for deplib continue fi # $linkmode = prog... - link_static=no # Whether the deplib will be linked statically - if test -n "$library_names" && - { test "$prefer_static_libs" = no || test -z "$old_library"; }; then - # Link against this shared library + if test "$linkmode,$pass" = "prog,link"; then + if test -n "$library_names" && + { test "$prefer_static_libs" = no || test -z "$old_library"; }; then + # We need to hardcode the library path + if test -n "$shlibpath_var"; then + # Make sure the rpath contains only unique directories. + case "$temp_rpath " in + *" $dir "*) ;; + *" $absdir "*) ;; + *) temp_rpath="$temp_rpath $dir" ;; + esac + fi - if test "$linkmode,$pass" = "prog,link" || - { test "$linkmode" = lib && test "$hardcode_into_libs" = yes; }; then # Hardcode the library path. # Skip directories that are in the system default run-time # search path. @@ -1716,17 +2260,6 @@ esac ;; esac - if test "$linkmode" = prog; then - # We need to hardcode the library path - if test -n "$shlibpath_var"; then - # Make sure the rpath contains only unique directories. - case "$temp_rpath " in - *" $dir "*) ;; - *" $absdir "*) ;; - *) temp_rpath="$temp_rpath $dir" ;; - esac - fi - fi fi # $linkmode,$pass = prog,link... if test "$alldeplibs" = yes && @@ -1736,11 +2269,52 @@ # We only need to search for static libraries continue fi + fi + link_static=no # Whether the deplib will be linked statically + if test -n "$library_names" && + { test "$prefer_static_libs" = no || test -z "$old_library"; }; then if test "$installed" = no; then notinst_deplibs="$notinst_deplibs $lib" need_relink=yes fi + # This is a shared library + + # Warn about portability, can't link against -module's on + # some systems (darwin) + if test "$shouldnotlink" = yes && test "$pass" = link ; then + $echo + if test "$linkmode" = prog; then + $echo "*** Warning: Linking the executable $output against the loadable module" + else + $echo "*** Warning: Linking the shared library $output against the loadable module" + fi + $echo "*** $linklib is not portable!" + fi + if test "$linkmode" = lib && + test "$hardcode_into_libs" = yes; then + # Hardcode the library path. + # Skip directories that are in the system default run-time + # search path. + case " $sys_lib_dlsearch_path " in + *" $absdir "*) ;; + *) + case "$compile_rpath " in + *" $absdir "*) ;; + *) compile_rpath="$compile_rpath $absdir" + esac + ;; + esac + case " $sys_lib_dlsearch_path " in + *" $libdir "*) ;; + *) + case "$finalize_rpath " in + *" $libdir "*) ;; + *) finalize_rpath="$finalize_rpath $libdir" + esac + ;; + esac + fi if test -n "$old_archive_from_expsyms_cmds"; then # figure out the soname @@ -1754,7 +2328,7 @@ elif test -n "$soname_spec"; then # bleh windows case $host in - *cygwin*) + *cygwin* | mingw*) major=`expr $current - $age` versuffix="-$major" ;; @@ -1766,17 +2340,18 @@ # Make a new name for the extract_expsyms_cmds to use soroot="$soname" - soname=`echo $soroot | sed -e 's/^.*\///'` - newlib="libimp-`echo $soname | sed 's/^lib//;s/\.dll$//'`.a" + soname=`$echo $soroot | ${SED} -e 's/^.*\///'` + newlib="libimp-`$echo $soname | ${SED} 's/^lib//;s/\.dll$//'`.a" # If the library has no export list, then create one now if test -f "$output_objdir/$soname-def"; then : else $show "extracting exported symbol list from \`$soname'" save_ifs="$IFS"; IFS='~' - eval cmds=\"$extract_expsyms_cmds\" + cmds=$extract_expsyms_cmds for cmd in $cmds; do IFS="$save_ifs" + eval cmd=\"$cmd\" $show "$cmd" $run eval "$cmd" || exit $? done @@ -1787,9 +2362,10 @@ if test -f "$output_objdir/$newlib"; then :; else $show "generating import library for \`$soname'" save_ifs="$IFS"; IFS='~' - eval cmds=\"$old_archive_from_expsyms_cmds\" + cmds=$old_archive_from_expsyms_cmds for cmd in $cmds; do IFS="$save_ifs" + eval cmd=\"$cmd\" $show "$cmd" $run eval "$cmd" || exit $? done @@ -1809,6 +2385,22 @@ immediate | unsupported) if test "$hardcode_direct" = no; then add="$dir/$linklib" + case $host in + *-*-sco3.2v5* ) add_dir="-L$dir" ;; + *-*-darwin* ) + # if the lib is a module then we can not link against + # it, someone is ignoring the new warnings I added + if /usr/bin/file -L $add 2> /dev/null | $EGREP "bundle" >/dev/null ; then + $echo "** Warning, lib $linklib is a module, not a shared library" + if test -z "$old_library" ; then + $echo + $echo "** And there doesn't seem to be a static archive available" + $echo "** The link will probably fail, sorry" + else + add="$dir/$old_library" + fi + fi + esac elif test "$hardcode_minus_L" = no; then case $host in *-*-sunos*) add_shlibpath="$dir" ;; @@ -1827,6 +2419,14 @@ add="$dir/$linklib" elif test "$hardcode_minus_L" = yes; then add_dir="-L$dir" + # Try looking first in the location we're being installed to. + if test -n "$inst_prefix_dir"; then + case "$libdir" in + [\\/]*) + add_dir="$add_dir -L$inst_prefix_dir$libdir" + ;; + esac + fi add="-l$name" elif test "$hardcode_shlibpath_var" = yes; then add_shlibpath="$dir" @@ -1840,7 +2440,7 @@ if test "$lib_linked" != yes; then $echo "$modename: configuration error: unsupported hardcode properties" - exit 1 + exit $EXIT_FAILURE fi if test -n "$add_shlibpath"; then @@ -1882,9 +2482,24 @@ *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; esac add="-l$name" + elif test "$hardcode_automatic" = yes; then + if test -n "$inst_prefix_dir" && + test -f "$inst_prefix_dir$libdir/$linklib" ; then + add="$inst_prefix_dir$libdir/$linklib" + else + add="$libdir/$linklib" + fi else # We cannot seem to hardcode it, guess we'll fake it. add_dir="-L$libdir" + # Try looking first in the location we're being installed to. + if test -n "$inst_prefix_dir"; then + case "$libdir" in + [\\/]*) + add_dir="$add_dir -L$inst_prefix_dir$libdir" + ;; + esac + fi add="-l$name" fi @@ -1897,15 +2512,6 @@ fi fi elif test "$linkmode" = prog; then - if test "$alldeplibs" = yes && - { test "$deplibs_check_method" = pass_all || - { test "$build_libtool_libs" = yes && - test -n "$library_names"; }; }; then - # We only need to search for static libraries - continue - fi - - # Try to link the static library # Here we assume that one of hardcode_direct or hardcode_minus_L # is not unsupported. This is valid on all known static and # shared platforms. @@ -1925,20 +2531,21 @@ # Just print a warning and add the library to dependency_libs so # that the program can be linked against the static library. - echo - echo "*** Warning: This library needs some functionality provided by $lib." - echo "*** I have the capability to make that library automatically link in when" - echo "*** you link to this library. But I can only do this if you have a" - echo "*** shared version of the library, which you do not appear to have." + $echo + $echo "*** Warning: This system can not link to static lib archive $lib." + $echo "*** I have the capability to make that library automatically link in when" + $echo "*** you link to this library. But I can only do this if you have a" + $echo "*** shared version of the library, which you do not appear to have." if test "$module" = yes; then - echo "*** Therefore, libtool will create a static module, that should work " - echo "*** as long as the dlopening application is linked with the -dlopen flag." + $echo "*** But as you try to build a module library, libtool will still create " + $echo "*** a static module, that should work as long as the dlopening application" + $echo "*** is linked with the -dlopen flag to resolve symbols at runtime." if test -z "$global_symbol_pipe"; then - echo - echo "*** However, this would only work if libtool was able to extract symbol" - echo "*** lists from a program, using \`nm' or equivalent, but libtool could" - echo "*** not find such a program. So, this module is probably useless." - echo "*** \`nm' from GNU binutils and a full rebuild may help." + $echo + $echo "*** However, this would only work if libtool was able to extract symbol" + $echo "*** lists from a program, using \`nm' or equivalent, but libtool could" + $echo "*** not find such a program. So, this module is probably useless." + $echo "*** \`nm' from GNU binutils and a full rebuild may help." fi if test "$build_old_libs" = no; then build_libtool_libs=module @@ -1957,7 +2564,8 @@ if test "$linkmode" = lib; then if test -n "$dependency_libs" && - { test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes || + { test "$hardcode_into_libs" != yes || + test "$build_old_libs" = yes || test "$link_static" = yes; }; then # Extract -R from dependency_libs temp_deplibs= @@ -1981,9 +2589,11 @@ tmp_libs= for deplib in $dependency_libs; do newdependency_libs="$deplib $newdependency_libs" - case "$tmp_libs " in - *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; - esac + if test "X$duplicate_deps" = "Xyes" ; then + case "$tmp_libs " in + *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; + esac + fi tmp_libs="$tmp_libs $deplib" done @@ -2007,22 +2617,67 @@ ;; esac if grep "^installed=no" $deplib > /dev/null; then - path="-L$absdir/$objdir" + path="$absdir/$objdir" else - eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` if test -z "$libdir"; then $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2 - exit 1 + exit $EXIT_FAILURE fi if test "$absdir" != "$libdir"; then $echo "$modename: warning: \`$deplib' seems to be moved" 1>&2 fi - path="-L$absdir" + path="$absdir" fi + depdepl= + case $host in + *-*-darwin*) + # we do not want to link against static libs, + # but need to link against shared + eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib` + if test -n "$deplibrary_names" ; then + for tmp in $deplibrary_names ; do + depdepl=$tmp + done + if test -f "$path/$depdepl" ; then + depdepl="$path/$depdepl" + fi + # do not add paths which are already there + case " $newlib_search_path " in + *" $path "*) ;; + *) newlib_search_path="$newlib_search_path $path";; + esac + fi + path="" + ;; + *) + path="-L$path" + ;; + esac + ;; + -l*) + case $host in + *-*-darwin*) + # Again, we only want to link against shared libraries + eval tmp_libs=`$echo "X$deplib" | $Xsed -e "s,^\-l,,"` + for tmp in $newlib_search_path ; do + if test -f "$tmp/lib$tmp_libs.dylib" ; then + eval depdepl="$tmp/lib$tmp_libs.dylib" + break + fi + done + path="" + ;; + *) continue ;; + esac ;; *) continue ;; esac case " $deplibs " in + *" $depdepl "*) ;; + *) deplibs="$depdepl $deplibs" ;; + esac + case " $deplibs " in *" $path "*) ;; *) deplibs="$deplibs $path" ;; esac @@ -2030,6 +2685,7 @@ fi # link_all_deplibs != no fi # linkmode = lib done # for deplib in $libs + dependency_libs="$newdependency_libs" if test "$pass" = dlpreopen; then # Link the dlpreopened libraries before other libraries for deplib in $save_deplibs; do @@ -2037,7 +2693,6 @@ done fi if test "$pass" != dlopen; then - test "$pass" != scan && dependency_libs="$newdependency_libs" if test "$pass" != conv; then # Make sure lib_search_path contains only unique directories. lib_search_path= @@ -2060,9 +2715,30 @@ eval tmp_libs=\"\$$var\" new_libs= for deplib in $tmp_libs; do + # FIXME: Pedantically, this is the right thing to do, so + # that some nasty dependency loop isn't accidentally + # broken: + #new_libs="$deplib $new_libs" + # Pragmatically, this seems to cause very few problems in + # practice: case $deplib in -L*) new_libs="$deplib $new_libs" ;; + -R*) ;; *) + # And here is the reason: when a library appears more + # than once as an explicit dependence of a library, or + # is implicitly linked in more than once by the + # compiler, it is considered special, and multiple + # occurrences thereof are not removed. Compare this + # with having the same library being listed as a + # dependency of multiple other libraries: in this case, + # we know (pedantically, we assume) the library does not + # need to be listed more than once, so we keep only the + # last copy. This is not always right, but it is rare + # enough that we require users that really mean to play + # such unportable linking tricks to link the library + # using -Wl,-lname, so that libtool does not consider it + # for duplicate removal. case " $specialdeplibs " in *" $deplib "*) new_libs="$deplib $new_libs" ;; *) @@ -2090,11 +2766,20 @@ eval $var=\"$tmp_libs\" done # for var fi - if test "$pass" = "conv" && - { test "$linkmode" = "lib" || test "$linkmode" = "prog"; }; then - libs="$deplibs" # reset libs - deplibs= - fi + # Last step: remove runtime libs from dependency_libs + # (they stay in deplibs) + tmp_libs= + for i in $dependency_libs ; do + case " $predeps $postdeps $compiler_lib_search_path " in + *" $i "*) + i="" + ;; + esac + if test -n "$i" ; then + tmp_libs="$tmp_libs $i" + fi + done + dependency_libs=$tmp_libs done # for pass if test "$linkmode" = prog; then dlfiles="$newdlfiles" @@ -2103,6 +2788,10 @@ case $linkmode in oldlib) + if test -n "$deplibs"; then + $echo "$modename: warning: \`-l' and \`-L' are ignored for archives" 1>&2 + fi + if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then $echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2 fi @@ -2116,7 +2805,7 @@ fi if test -n "$vinfo"; then - $echo "$modename: warning: \`-version-info' is ignored for archives" 1>&2 + $echo "$modename: warning: \`-version-info/-version-number' is ignored for archives" 1>&2 fi if test -n "$release"; then @@ -2138,17 +2827,19 @@ case $outputname in lib*) name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'` + eval shared_ext=\"$shrext_cmds\" eval libname=\"$libname_spec\" ;; *) if test "$module" = no; then $echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2 $echo "$help" 1>&2 - exit 1 + exit $EXIT_FAILURE fi if test "$need_lib_prefix" != no; then # Add the "lib" prefix for modules if required name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'` + eval shared_ext=\"$shrext_cmds\" eval libname=\"$libname_spec\" else libname=`$echo "X$outputname" | $Xsed -e 's/\.la$//'` @@ -2159,11 +2850,11 @@ if test -n "$objs"; then if test "$deplibs_check_method" != pass_all; then $echo "$modename: cannot build libtool library \`$output' from non-libtool objects on this host:$objs" 2>&1 - exit 1 + exit $EXIT_FAILURE else - echo - echo "*** Warning: Linking the shared library $output against the non-libtool" - echo "*** objects $objs is not portable!" + $echo + $echo "*** Warning: Linking the shared library $output against the non-libtool" + $echo "*** objects $objs is not portable!" libobjs="$libobjs $objs" fi fi @@ -2182,14 +2873,16 @@ if test -z "$rpath"; then if test "$build_libtool_libs" = yes; then # Building a libtool convenience library. - libext=al + # Some compilers have problems with a `.al' extension so + # convenience libraries should have the same extension an + # archive normally would. oldlibs="$output_objdir/$libname.$libext $oldlibs" build_libtool_libs=convenience build_old_libs=yes fi if test -n "$vinfo"; then - $echo "$modename: warning: \`-version-info' is ignored for convenience libraries" 1>&2 + $echo "$modename: warning: \`-version-info/-version-number' is ignored for convenience libraries" 1>&2 fi if test -n "$release"; then @@ -2205,45 +2898,82 @@ if test -n "$8"; then $echo "$modename: too many parameters to \`-version-info'" 1>&2 $echo "$help" 1>&2 - exit 1 + exit $EXIT_FAILURE fi - current="$2" - revision="$3" - age="$4" + # convert absolute version numbers to libtool ages + # this retains compatibility with .la files and attempts + # to make the code below a bit more comprehensible + + case $vinfo_number in + yes) + number_major="$2" + number_minor="$3" + number_revision="$4" + # + # There are really only two kinds -- those that + # use the current revision as the major version + # and those that subtract age and use age as + # a minor version. But, then there is irix + # which has an extra 1 added just for fun + # + case $version_type in + darwin|linux|osf|windows) + current=`expr $number_major + $number_minor` + age="$number_minor" + revision="$number_revision" + ;; + freebsd-aout|freebsd-elf|sunos) + current="$number_major" + revision="$number_minor" + age="0" + ;; + irix|nonstopux) + current=`expr $number_major + $number_minor - 1` + age="$number_minor" + revision="$number_minor" + ;; + esac + ;; + no) + current="$2" + revision="$3" + age="$4" + ;; + esac # Check that each of the things are valid numbers. case $current in - [0-9]*) ;; + 0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;; *) $echo "$modename: CURRENT \`$current' is not a nonnegative integer" 1>&2 $echo "$modename: \`$vinfo' is not valid version information" 1>&2 - exit 1 + exit $EXIT_FAILURE ;; esac case $revision in - [0-9]*) ;; + 0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;; *) $echo "$modename: REVISION \`$revision' is not a nonnegative integer" 1>&2 $echo "$modename: \`$vinfo' is not valid version information" 1>&2 - exit 1 + exit $EXIT_FAILURE ;; esac case $age in - [0-9]*) ;; + 0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;; *) $echo "$modename: AGE \`$age' is not a nonnegative integer" 1>&2 $echo "$modename: \`$vinfo' is not valid version information" 1>&2 - exit 1 + exit $EXIT_FAILURE ;; esac if test "$age" -gt "$current"; then $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2 $echo "$modename: \`$vinfo' is not valid version information" 1>&2 - exit 1 + exit $EXIT_FAILURE fi # Calculate the version variables. @@ -2273,16 +3003,21 @@ versuffix=".$current"; ;; - irix) + irix | nonstopux) major=`expr $current - $age + 1` - verstring="sgi$major.$revision" + + case $version_type in + nonstopux) verstring_prefix=nonstopux ;; + *) verstring_prefix=sgi ;; + esac + verstring="$verstring_prefix$major.$revision" # Add in all the interfaces that we are compatible with. loop=$revision while test "$loop" -ne 0; do iface=`expr $revision - $loop` loop=`expr $loop - 1` - verstring="sgi$major.$iface:$verstring" + verstring="$verstring_prefix$major.$iface:$verstring" done # Before this point, $major must not contain `.'. @@ -2296,7 +3031,7 @@ ;; osf) - major=`expr $current - $age` + major=.`expr $current - $age` versuffix=".$current.$age.$revision" verstring="$current.$age.$revision" @@ -2326,20 +3061,19 @@ *) $echo "$modename: unknown library version type \`$version_type'" 1>&2 - echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 - exit 1 + $echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 + exit $EXIT_FAILURE ;; esac # Clear the version info if we defaulted, and they specified a release. if test -z "$vinfo" && test -n "$release"; then major= - verstring="0.0" case $version_type in darwin) # we can't check for "0.0" in archive_cmds due to quoting # problems, so we reset it completely - verstring="" + verstring= ;; *) verstring="0.0" @@ -2373,9 +3107,30 @@ fi if test "$mode" != relink; then - # Remove our outputs. - $show "${rm}r $output_objdir/$outputname $output_objdir/$libname.* $output_objdir/${libname}${release}.*" - $run ${rm}r $output_objdir/$outputname $output_objdir/$libname.* $output_objdir/${libname}${release}.* + # Remove our outputs, but don't remove object files since they + # may have been created when compiling PIC objects. + removelist= + tempremovelist=`$echo "$output_objdir/*"` + for p in $tempremovelist; do + case $p in + *.$objext) + ;; + $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*) + if test "X$precious_files_regex" != "X"; then + if echo $p | $EGREP -e "$precious_files_regex" >/dev/null 2>&1 + then + continue + fi + fi + removelist="$removelist $p" + ;; + *) ;; + esac + done + if test -n "$removelist"; then + $show "${rm}r $removelist" + $run ${rm}r $removelist + fi fi # Now set the variables for building old libraries. @@ -2388,9 +3143,9 @@ # Eliminate all temporary directories. for path in $notinst_path; do - lib_search_path=`echo "$lib_search_path " | sed -e 's% $path % %g'` - deplibs=`echo "$deplibs " | sed -e 's% -L$path % %g'` - dependency_libs=`echo "$dependency_libs " | sed -e 's% -L$path % %g'` + lib_search_path=`$echo "$lib_search_path " | ${SED} -e 's% $path % %g'` + deplibs=`$echo "$deplibs " | ${SED} -e 's% -L$path % %g'` + dependency_libs=`$echo "$dependency_libs " | ${SED} -e 's% -L$path % %g'` done if test -n "$xrpath"; then @@ -2441,10 +3196,11 @@ *-*-netbsd*) # Don't link with libc until the a.out ld.so is fixed. ;; - *-*-openbsd*) + *-*-openbsd* | *-*-freebsd*) # Do not include libc due to us having libc/libc_r. + test "X$arg" = "X-lc" && continue ;; - *) + *) # Add libc to deplibs on all other systems if necessary. if test "$build_libtool_need_lc" = "yes"; then deplibs="$deplibs -lc" @@ -2473,7 +3229,7 @@ # This might be a little naive. We might want to check # whether the library exists or not. But this is on # osf3 & osf4 and I'm not really sure... Just - # implementing what was already the behaviour. + # implementing what was already the behavior. newdeplibs=$deplibs ;; test_compile) @@ -2486,64 +3242,88 @@ int main() { return 0; } EOF $rm conftest - $CC -o conftest conftest.c $deplibs + $LTCC -o conftest conftest.c $deplibs if test "$?" -eq 0 ; then ldd_output=`ldd conftest` for i in $deplibs; do name="`expr $i : '-l\(.*\)'`" # If $name is empty we are operating on a -L argument. - if test -n "$name" && test "$name" != "0"; then - libname=`eval \\$echo \"$libname_spec\"` - deplib_matches=`eval \\$echo \"$library_names_spec\"` - set dummy $deplib_matches - deplib_match=$2 - if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then - newdeplibs="$newdeplibs $i" - else - droppeddeps=yes - echo - echo "*** Warning: This library needs some functionality provided by $i." - echo "*** I have the capability to make that library automatically link in when" - echo "*** you link to this library. But I can only do this if you have a" - echo "*** shared version of the library, which you do not appear to have." + if test "$name" != "" && test "$name" -ne "0"; then + if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + case " $predeps $postdeps " in + *" $i "*) + newdeplibs="$newdeplibs $i" + i="" + ;; + esac + fi + if test -n "$i" ; then + libname=`eval \\$echo \"$libname_spec\"` + deplib_matches=`eval \\$echo \"$library_names_spec\"` + set dummy $deplib_matches + deplib_match=$2 + if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then + newdeplibs="$newdeplibs $i" + else + droppeddeps=yes + $echo + $echo "*** Warning: dynamic linker does not accept needed library $i." + $echo "*** I have the capability to make that library automatically link in when" + $echo "*** you link to this library. But I can only do this if you have a" + $echo "*** shared version of the library, which I believe you do not have" + $echo "*** because a test_compile did reveal that the linker did not use it for" + $echo "*** its dynamic dependency list that programs get resolved with at runtime." + fi fi else newdeplibs="$newdeplibs $i" fi done else - # Error occured in the first compile. Let's try to salvage the situation: - # Compile a seperate program for each library. + # Error occurred in the first compile. Let's try to salvage + # the situation: Compile a separate program for each library. for i in $deplibs; do name="`expr $i : '-l\(.*\)'`" - # If $name is empty we are operating on a -L argument. - if test -n "$name" && test "$name" != "0"; then + # If $name is empty we are operating on a -L argument. + if test "$name" != "" && test "$name" != "0"; then $rm conftest - $CC -o conftest conftest.c $i + $LTCC -o conftest conftest.c $i # Did it work? if test "$?" -eq 0 ; then ldd_output=`ldd conftest` - libname=`eval \\$echo \"$libname_spec\"` - deplib_matches=`eval \\$echo \"$library_names_spec\"` - set dummy $deplib_matches - deplib_match=$2 - if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then - newdeplibs="$newdeplibs $i" - else - droppeddeps=yes - echo - echo "*** Warning: This library needs some functionality provided by $i." - echo "*** I have the capability to make that library automatically link in when" - echo "*** you link to this library. But I can only do this if you have a" - echo "*** shared version of the library, which you do not appear to have." + if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + case " $predeps $postdeps " in + *" $i "*) + newdeplibs="$newdeplibs $i" + i="" + ;; + esac + fi + if test -n "$i" ; then + libname=`eval \\$echo \"$libname_spec\"` + deplib_matches=`eval \\$echo \"$library_names_spec\"` + set dummy $deplib_matches + deplib_match=$2 + if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then + newdeplibs="$newdeplibs $i" + else + droppeddeps=yes + $echo + $echo "*** Warning: dynamic linker does not accept needed library $i." + $echo "*** I have the capability to make that library automatically link in when" + $echo "*** you link to this library. But I can only do this if you have a" + $echo "*** shared version of the library, which you do not appear to have" + $echo "*** because a test_compile did reveal that the linker did not use this one" + $echo "*** as a dynamic dependency that programs can get resolved with at runtime." + fi fi else droppeddeps=yes - echo - echo "*** Warning! Library $i is needed by this library but I was not able to" - echo "*** make it link in! You will probably need to install it or some" - echo "*** library that it depends on before this library will be fully" - echo "*** functional. Installing it before continuing would be even better." + $echo + $echo "*** Warning! Library $i is needed by this library but I was not able to" + $echo "*** make it link in! You will probably need to install it or some" + $echo "*** library that it depends on before this library will be fully" + $echo "*** functional. Installing it before continuing would be even better." fi else newdeplibs="$newdeplibs $i" @@ -2557,11 +3337,20 @@ for a_deplib in $deplibs; do name="`expr $a_deplib : '-l\(.*\)'`" # If $name is empty we are operating on a -L argument. - if test -n "$name" && test "$name" != "0"; then - libname=`eval \\$echo \"$libname_spec\"` - for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do - potential_libs=`ls $i/$libname[.-]* 2>/dev/null` - for potent_lib in $potential_libs; do + if test "$name" != "" && test "$name" != "0"; then + if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + case " $predeps $postdeps " in + *" $a_deplib "*) + newdeplibs="$newdeplibs $a_deplib" + a_deplib="" + ;; + esac + fi + if test -n "$a_deplib" ; then + libname=`eval \\$echo \"$libname_spec\"` + for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do + potential_libs=`ls $i/$libname[.-]* 2>/dev/null` + for potent_lib in $potential_libs; do # Follow soft links. if ls -lLd "$potent_lib" 2>/dev/null \ | grep " -> " >/dev/null; then @@ -2574,28 +3363,36 @@ # but so what? potlib="$potent_lib" while test -h "$potlib" 2>/dev/null; do - potliblink=`ls -ld $potlib | sed 's/.* -> //'` + potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'` case $potliblink in [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";; *) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";; esac done if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \ - | sed 10q \ - | egrep "$file_magic_regex" > /dev/null; then + | ${SED} 10q \ + | $EGREP "$file_magic_regex" > /dev/null; then newdeplibs="$newdeplibs $a_deplib" a_deplib="" break 2 fi - done - done + done + done + fi if test -n "$a_deplib" ; then droppeddeps=yes - echo - echo "*** Warning: This library needs some functionality provided by $a_deplib." - echo "*** I have the capability to make that library automatically link in when" - echo "*** you link to this library. But I can only do this if you have a" - echo "*** shared version of the library, which you do not appear to have." + $echo + $echo "*** Warning: linker path does not have real file for library $a_deplib." + $echo "*** I have the capability to make that library automatically link in when" + $echo "*** you link to this library. But I can only do this if you have a" + $echo "*** shared version of the library, which you do not appear to have" + $echo "*** because I did check the linker path looking for a file starting" + if test -z "$potlib" ; then + $echo "*** with $libname but no candidates were found. (...for file magic test)" + else + $echo "*** with $libname and none of the candidates passed a file format test" + $echo "*** using a file magic. Last file checked: $potlib" + fi fi else # Add a -L argument. @@ -2610,26 +3407,44 @@ name="`expr $a_deplib : '-l\(.*\)'`" # If $name is empty we are operating on a -L argument. if test -n "$name" && test "$name" != "0"; then - libname=`eval \\$echo \"$libname_spec\"` - for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do - potential_libs=`ls $i/$libname[.-]* 2>/dev/null` - for potent_lib in $potential_libs; do - if eval echo \"$potent_lib\" 2>/dev/null \ - | sed 10q \ - | egrep "$match_pattern_regex" > /dev/null; then - newdeplibs="$newdeplibs $a_deplib" - a_deplib="" - break 2 - fi + if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + case " $predeps $postdeps " in + *" $a_deplib "*) + newdeplibs="$newdeplibs $a_deplib" + a_deplib="" + ;; + esac + fi + if test -n "$a_deplib" ; then + libname=`eval \\$echo \"$libname_spec\"` + for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do + potential_libs=`ls $i/$libname[.-]* 2>/dev/null` + for potent_lib in $potential_libs; do + potlib="$potent_lib" # see symlink-check above in file_magic test + if eval $echo \"$potent_lib\" 2>/dev/null \ + | ${SED} 10q \ + | $EGREP "$match_pattern_regex" > /dev/null; then + newdeplibs="$newdeplibs $a_deplib" + a_deplib="" + break 2 + fi + done done - done + fi if test -n "$a_deplib" ; then droppeddeps=yes - echo - echo "*** Warning: This library needs some functionality provided by $a_deplib." - echo "*** I have the capability to make that library automatically link in when" - echo "*** you link to this library. But I can only do this if you have a" - echo "*** shared version of the library, which you do not appear to have." + $echo + $echo "*** Warning: linker path does not have real file for library $a_deplib." + $echo "*** I have the capability to make that library automatically link in when" + $echo "*** you link to this library. But I can only do this if you have a" + $echo "*** shared version of the library, which you do not appear to have" + $echo "*** because I did check the linker path looking for a file starting" + if test -z "$potlib" ; then + $echo "*** with $libname but no candidates were found. (...for regex pattern test)" + else + $echo "*** with $libname and none of the candidates passed a file format test" + $echo "*** using a regex pattern. Last file checked: $potlib" + fi fi else # Add a -L argument. @@ -2639,16 +3454,23 @@ ;; none | unknown | *) newdeplibs="" - if $echo "X $deplibs" | $Xsed -e 's/ -lc$//' \ - -e 's/ -[LR][^ ]*//g' -e 's/[ ]//g' | - grep . >/dev/null; then - echo + tmp_deplibs=`$echo "X $deplibs" | $Xsed -e 's/ -lc$//' \ + -e 's/ -[LR][^ ]*//g'` + if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + for i in $predeps $postdeps ; do + # can't use Xsed below, because $i might contain '/' + tmp_deplibs=`$echo "X $tmp_deplibs" | ${SED} -e "1s,^X,," -e "s,$i,,"` + done + fi + if $echo "X $tmp_deplibs" | $Xsed -e 's/[ ]//g' \ + | grep . >/dev/null; then + $echo if test "X$deplibs_check_method" = "Xnone"; then - echo "*** Warning: inter-library dependencies are not supported in this platform." + $echo "*** Warning: inter-library dependencies are not supported in this platform." else - echo "*** Warning: inter-library dependencies are not known to be supported." + $echo "*** Warning: inter-library dependencies are not known to be supported." fi - echo "*** All declared inter-library dependencies are being dropped." + $echo "*** All declared inter-library dependencies are being dropped." droppeddeps=yes fi ;; @@ -2668,17 +3490,17 @@ if test "$droppeddeps" = yes; then if test "$module" = yes; then - echo - echo "*** Warning: libtool could not satisfy all declared inter-library" - echo "*** dependencies of module $libname. Therefore, libtool will create" - echo "*** a static module, that should work as long as the dlopening" - echo "*** application is linked with the -dlopen flag." + $echo + $echo "*** Warning: libtool could not satisfy all declared inter-library" + $echo "*** dependencies of module $libname. Therefore, libtool will create" + $echo "*** a static module, that should work as long as the dlopening" + $echo "*** application is linked with the -dlopen flag." if test -z "$global_symbol_pipe"; then - echo - echo "*** However, this would only work if libtool was able to extract symbol" - echo "*** lists from a program, using \`nm' or equivalent, but libtool could" - echo "*** not find such a program. So, this module is probably useless." - echo "*** \`nm' from GNU binutils and a full rebuild may help." + $echo + $echo "*** However, this would only work if libtool was able to extract symbol" + $echo "*** lists from a program, using \`nm' or equivalent, but libtool could" + $echo "*** not find such a program. So, this module is probably useless." + $echo "*** \`nm' from GNU binutils and a full rebuild may help." fi if test "$build_old_libs" = no; then oldlibs="$output_objdir/$libname.$libext" @@ -2688,16 +3510,16 @@ build_libtool_libs=no fi else - echo "*** The inter-library dependencies that have been dropped here will be" - echo "*** automatically added whenever a program is linked with this library" - echo "*** or is declared to -dlopen it." + $echo "*** The inter-library dependencies that have been dropped here will be" + $echo "*** automatically added whenever a program is linked with this library" + $echo "*** or is declared to -dlopen it." if test "$allow_undefined" = no; then - echo - echo "*** Since this library must not contain undefined symbols," - echo "*** because either the platform does not support them or" - echo "*** it was explicitly requested with -no-undefined," - echo "*** libtool will only create a static version of it." + $echo + $echo "*** Since this library must not contain undefined symbols," + $echo "*** because either the platform does not support them or" + $echo "*** it was explicitly requested with -no-undefined," + $echo "*** libtool will only create a static version of it." if test "$build_old_libs" = no; then oldlibs="$output_objdir/$libname.$libext" build_libtool_libs=module @@ -2755,7 +3577,11 @@ if test -n "$hardcode_libdir_separator" && test -n "$hardcode_libdirs"; then libdir="$hardcode_libdirs" - eval dep_rpath=\"$hardcode_libdir_flag_spec\" + if test -n "$hardcode_libdir_flag_spec_ld"; then + eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\" + else + eval dep_rpath=\"$hardcode_libdir_flag_spec\" + fi fi if test -n "$runpath_var" && test -n "$perm_rpath"; then # We should set the runpath_var. @@ -2775,6 +3601,7 @@ fi # Get the real and link names of the library. + eval shared_ext=\"$shrext_cmds\" eval library_names=\"$library_names_spec\" set dummy $library_names realname="$2" @@ -2785,7 +3612,9 @@ else soname="$realname" fi - test -z "$dlname" && dlname=$soname + if test -z "$dlname"; then + dlname=$soname + fi lib="$output_objdir/$realname" for link @@ -2793,23 +3622,6 @@ linknames="$linknames $link" done - # Ensure that we have .o objects for linkers which dislike .lo - # (e.g. aix) in case we are running --disable-static - for obj in $libobjs; do - xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'` - if test "X$xdir" = "X$obj"; then - xdir="." - else - xdir="$xdir" - fi - baseobj=`$echo "X$obj" | $Xsed -e 's%^.*/%%'` - oldobj=`$echo "X$baseobj" | $Xsed -e "$lo2o"` - if test ! -f $xdir/$oldobj; then - $show "(cd $xdir && ${LN_S} $baseobj $oldobj)" - $run eval '(cd $xdir && ${LN_S} $baseobj $oldobj)' || exit $? - fi - done - # Use standard objects if they are pic test -z "$pic_flag" && libobjs=`$echo "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` @@ -2819,17 +3631,26 @@ $show "generating symbol list for \`$libname.la'" export_symbols="$output_objdir/$libname.exp" $run $rm $export_symbols - eval cmds=\"$export_symbols_cmds\" + cmds=$export_symbols_cmds save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" || exit $? + eval cmd=\"$cmd\" + if len=`expr "X$cmd" : ".*"` && + test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then + $show "$cmd" + $run eval "$cmd" || exit $? + skipped_export=false + else + # The command line is too long to execute in one step. + $show "using reloadable object file for export list..." + skipped_export=: + fi done IFS="$save_ifs" if test -n "$export_symbols_regex"; then - $show "egrep -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\"" - $run eval 'egrep -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' + $show "$EGREP -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\"" + $run eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' $show "$mv \"${export_symbols}T\" \"$export_symbols\"" $run eval '$mv "${export_symbols}T" "$export_symbols"' fi @@ -2840,15 +3661,27 @@ $run eval '$echo "X$include_expsyms" | $SP2NL >> "$export_symbols"' fi + tmp_deplibs= + for test_deplib in $deplibs; do + case " $convenience " in + *" $test_deplib "*) ;; + *) + tmp_deplibs="$tmp_deplibs $test_deplib" + ;; + esac + done + deplibs="$tmp_deplibs" + if test -n "$convenience"; then if test -n "$whole_archive_flag_spec"; then + save_libobjs=$libobjs eval libobjs=\"\$libobjs $whole_archive_flag_spec\" else gentop="$output_objdir/${outputname}x" $show "${rm}r $gentop" $run ${rm}r "$gentop" - $show "mkdir $gentop" - $run mkdir "$gentop" + $show "$mkdir $gentop" + $run $mkdir "$gentop" status=$? if test "$status" -ne 0 && test ! -d "$gentop"; then exit $status @@ -2866,16 +3699,42 @@ $show "${rm}r $xdir" $run ${rm}r "$xdir" - $show "mkdir $xdir" - $run mkdir "$xdir" + $show "$mkdir $xdir" + $run $mkdir "$xdir" status=$? if test "$status" -ne 0 && test ! -d "$xdir"; then exit $status fi + # We will extract separately just the conflicting names and we will no + # longer touch any unique names. It is faster to leave these extract + # automatically by $AR in one run. $show "(cd $xdir && $AR x $xabs)" $run eval "(cd \$xdir && $AR x \$xabs)" || exit $? + if ($AR t "$xabs" | sort | sort -uc >/dev/null 2>&1); then + : + else + $echo "$modename: warning: object name conflicts; renaming object files" 1>&2 + $echo "$modename: warning: to ensure that they will not overwrite" 1>&2 + $AR t "$xabs" | sort | uniq -cd | while read -r count name + do + i=1 + while test "$i" -le "$count" + do + # Put our $i before any first dot (extension) + # Never overwrite any file + name_to="$name" + while test "X$name_to" = "X$name" || test -f "$xdir/$name_to" + do + name_to=`$echo "X$name_to" | $Xsed -e "s/\([^.]*\)/\1-$i/"` + done + $show "(cd $xdir && $AR xN $i $xabs '$name' && $mv '$name' '$name_to')" + $run eval "(cd \$xdir && $AR xN $i \$xabs '$name' && $mv '$name' '$name_to')" || exit $? + i=`expr $i + 1` + done + done + fi - libobjs="$libobjs "`find $xdir -name \*.o -print -o -name \*.lo -print | $NL2SP` + libobjs="$libobjs "`find $xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP` done fi fi @@ -2891,14 +3750,147 @@ fi # Do each of the archive commands. + if test "$module" = yes && test -n "$module_cmds" ; then + if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then + eval test_cmds=\"$module_expsym_cmds\" + cmds=$module_expsym_cmds + else + eval test_cmds=\"$module_cmds\" + cmds=$module_cmds + fi + else if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then - eval cmds=\"$archive_expsym_cmds\" + eval test_cmds=\"$archive_expsym_cmds\" + cmds=$archive_expsym_cmds + else + eval test_cmds=\"$archive_cmds\" + cmds=$archive_cmds + fi + fi + + if test "X$skipped_export" != "X:" && len=`expr "X$test_cmds" : ".*"` && + test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then + : else - eval cmds=\"$archive_cmds\" + # The command line is too long to link in one step, link piecewise. + $echo "creating reloadable object files..." + + # Save the value of $output and $libobjs because we want to + # use them later. If we have whole_archive_flag_spec, we + # want to use save_libobjs as it was before + # whole_archive_flag_spec was expanded, because we can't + # assume the linker understands whole_archive_flag_spec. + # This may have to be revisited, in case too many + # convenience libraries get linked in and end up exceeding + # the spec. + if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then + save_libobjs=$libobjs + fi + save_output=$output + + # Clear the reloadable object creation command queue and + # initialize k to one. + test_cmds= + concat_cmds= + objlist= + delfiles= + last_robj= + k=1 + output=$output_objdir/$save_output-${k}.$objext + # Loop over the list of objects to be linked. + for obj in $save_libobjs + do + eval test_cmds=\"$reload_cmds $objlist $last_robj\" + if test "X$objlist" = X || + { len=`expr "X$test_cmds" : ".*"` && + test "$len" -le "$max_cmd_len"; }; then + objlist="$objlist $obj" + else + # The command $test_cmds is almost too long, add a + # command to the queue. + if test "$k" -eq 1 ; then + # The first file doesn't have a previous command to add. + eval concat_cmds=\"$reload_cmds $objlist $last_robj\" + else + # All subsequent reloadable object files will link in + # the last one created. + eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj\" + fi + last_robj=$output_objdir/$save_output-${k}.$objext + k=`expr $k + 1` + output=$output_objdir/$save_output-${k}.$objext + objlist=$obj + len=1 + fi + done + # Handle the remaining objects by creating one last + # reloadable object file. All subsequent reloadable object + # files will link in the last one created. + test -z "$concat_cmds" || concat_cmds=$concat_cmds~ + eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\" + + if ${skipped_export-false}; then + $show "generating symbol list for \`$libname.la'" + export_symbols="$output_objdir/$libname.exp" + $run $rm $export_symbols + libobjs=$output + # Append the command to create the export file. + eval concat_cmds=\"\$concat_cmds~$export_symbols_cmds\" + fi + + # Set up a command to remove the reloadale object files + # after they are used. + i=0 + while test "$i" -lt "$k" + do + i=`expr $i + 1` + delfiles="$delfiles $output_objdir/$save_output-${i}.$objext" + done + + $echo "creating a temporary reloadable object file: $output" + + # Loop through the commands generated above and execute them. + save_ifs="$IFS"; IFS='~' + for cmd in $concat_cmds; do + IFS="$save_ifs" + $show "$cmd" + $run eval "$cmd" || exit $? + done + IFS="$save_ifs" + + libobjs=$output + # Restore the value of output. + output=$save_output + + if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then + eval libobjs=\"\$libobjs $whole_archive_flag_spec\" + fi + # Expand the library linking commands again to reset the + # value of $libobjs for piecewise linking. + + # Do each of the archive commands. + if test "$module" = yes && test -n "$module_cmds" ; then + if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then + cmds=$module_expsym_cmds + else + cmds=$module_cmds + fi + else + if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then + cmds=$archive_expsym_cmds + else + cmds=$archive_cmds + fi + fi + + # Append the command to remove the reloadable object files + # to the just-reset $cmds. + eval cmds=\"\$cmds~\$rm $delfiles\" fi save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" + eval cmd=\"$cmd\" $show "$cmd" $run eval "$cmd" || exit $? done @@ -2907,7 +3899,7 @@ # Restore the uninstalled library and exit if test "$mode" = relink; then $run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname ${realname}T && $mv "$realname"U $realname)' || exit $? - exit 0 + exit $EXIT_SUCCESS fi # Create links to the real library. @@ -2955,7 +3947,7 @@ *.lo) if test -n "$objs$old_deplibs"; then $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2 - exit 1 + exit $EXIT_FAILURE fi libobj="$output" obj=`$echo "X$output" | $Xsed -e "$lo2o"` @@ -2986,8 +3978,8 @@ gentop="$output_objdir/${obj}x" $show "${rm}r $gentop" $run ${rm}r "$gentop" - $show "mkdir $gentop" - $run mkdir "$gentop" + $show "$mkdir $gentop" + $run $mkdir "$gentop" status=$? if test "$status" -ne 0 && test ! -d "$gentop"; then exit $status @@ -3005,16 +3997,42 @@ $show "${rm}r $xdir" $run ${rm}r "$xdir" - $show "mkdir $xdir" - $run mkdir "$xdir" + $show "$mkdir $xdir" + $run $mkdir "$xdir" status=$? if test "$status" -ne 0 && test ! -d "$xdir"; then exit $status fi + # We will extract separately just the conflicting names and we will no + # longer touch any unique names. It is faster to leave these extract + # automatically by $AR in one run. $show "(cd $xdir && $AR x $xabs)" $run eval "(cd \$xdir && $AR x \$xabs)" || exit $? + if ($AR t "$xabs" | sort | sort -uc >/dev/null 2>&1); then + : + else + $echo "$modename: warning: object name conflicts; renaming object files" 1>&2 + $echo "$modename: warning: to ensure that they will not overwrite" 1>&2 + $AR t "$xabs" | sort | uniq -cd | while read -r count name + do + i=1 + while test "$i" -le "$count" + do + # Put our $i before any first dot (extension) + # Never overwrite any file + name_to="$name" + while test "X$name_to" = "X$name" || test -f "$xdir/$name_to" + do + name_to=`$echo "X$name_to" | $Xsed -e "s/\([^.]*\)/\1-$i/"` + done + $show "(cd $xdir && $AR xN $i $xabs '$name' && $mv '$name' '$name_to')" + $run eval "(cd \$xdir && $AR xN $i \$xabs '$name' && $mv '$name' '$name_to')" || exit $? + i=`expr $i + 1` + done + done + fi - reload_conv_objs="$reload_objs "`find $xdir -name \*.o -print -o -name \*.lo -print | $NL2SP` + reload_conv_objs="$reload_objs "`find $xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP` done fi fi @@ -3023,10 +4041,11 @@ reload_objs="$objs$old_deplibs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test output="$obj" - eval cmds=\"$reload_cmds\" + cmds=$reload_cmds save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" + eval cmd=\"$cmd\" $show "$cmd" $run eval "$cmd" || exit $? done @@ -3039,7 +4058,7 @@ $run ${rm}r $gentop fi - exit 0 + exit $EXIT_SUCCESS fi if test "$build_libtool_libs" != yes; then @@ -3050,37 +4069,24 @@ # Create an invalid libtool object if no PIC, so that we don't # accidentally link it into a program. - $show "echo timestamp > $libobj" - $run eval "echo timestamp > $libobj" || exit $? - exit 0 + # $show "echo timestamp > $libobj" + # $run eval "echo timestamp > $libobj" || exit $? + exit $EXIT_SUCCESS fi if test -n "$pic_flag" || test "$pic_mode" != default; then # Only do commands if we really have different PIC objects. reload_objs="$libobjs $reload_conv_objs" output="$libobj" - eval cmds=\"$reload_cmds\" + cmds=$reload_cmds save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" + eval cmd=\"$cmd\" $show "$cmd" $run eval "$cmd" || exit $? done IFS="$save_ifs" - else - # Just create a symlink. - $show $rm $libobj - $run $rm $libobj - xdir=`$echo "X$libobj" | $Xsed -e 's%/[^/]*$%%'` - if test "X$xdir" = "X$libobj"; then - xdir="." - else - xdir="$xdir" - fi - baseobj=`$echo "X$libobj" | $Xsed -e 's%^.*/%%'` - oldobj=`$echo "X$baseobj" | $Xsed -e "$lo2o"` - $show "(cd $xdir && $LN_S $oldobj $baseobj)" - $run eval '(cd $xdir && $LN_S $oldobj $baseobj)' || exit $? fi if test -n "$gentop"; then @@ -3088,12 +4094,12 @@ $run ${rm}r $gentop fi - exit 0 + exit $EXIT_SUCCESS ;; prog) case $host in - *cygwin*) output=`echo $output | sed -e 's,.exe$,,;s,$,.exe,'` ;; + *cygwin*) output=`$echo $output | ${SED} -e 's,.exe$,,;s,$,.exe,'` ;; esac if test -n "$vinfo"; then $echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2 @@ -3118,6 +4124,16 @@ ;; esac + case $host in + *darwin*) + # Don't allow lazy linking, it breaks C++ global constructors + if test "$tagname" = CXX ; then + compile_command="$compile_command ${wl}-bind_at_load" + finalize_command="$finalize_command ${wl}-bind_at_load" + fi + ;; + esac + compile_command="$compile_command $compile_deplibs" finalize_command="$finalize_command $finalize_deplibs" @@ -3268,12 +4284,12 @@ done if test -n "$exclude_expsyms"; then - $run eval 'egrep -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T' + $run eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T' $run eval '$mv "$nlist"T "$nlist"' fi if test -n "$export_symbols_regex"; then - $run eval 'egrep -e "$export_symbols_regex" "$nlist" > "$nlist"T' + $run eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T' $run eval '$mv "$nlist"T "$nlist"' fi @@ -3281,9 +4297,9 @@ if test -z "$export_symbols"; then export_symbols="$output_objdir/$output.exp" $run $rm $export_symbols - $run eval "sed -n -e '/^: @PROGRAM@$/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"' + $run eval "${SED} -n -e '/^: @PROGRAM@$/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"' else - $run eval "sed -e 's/\([][.*^$]\)/\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$output.exp"' + $run eval "${SED} -e 's/\([][.*^$]\)/\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$output.exp"' $run eval 'grep -f "$output_objdir/$output.exp" < "$nlist" > "$nlist"T' $run eval 'mv "$nlist"T "$nlist"' fi @@ -3291,8 +4307,8 @@ for arg in $dlprefiles; do $show "extracting global C symbols from \`$arg'" - name=`echo "$arg" | sed -e 's%^.*/%%'` - $run eval 'echo ": $name " >> "$nlist"' + name=`$echo "$arg" | ${SED} -e 's%^.*/%%'` + $run eval '$echo ": $name " >> "$nlist"' $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'" done @@ -3301,12 +4317,18 @@ test -f "$nlist" || : > "$nlist" if test -n "$exclude_expsyms"; then - egrep -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T + $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T $mv "$nlist"T "$nlist" fi # Try sorting and uniquifying the output. - if grep -v "^: " < "$nlist" | sort +2 | uniq > "$nlist"S; then + if grep -v "^: " < "$nlist" | + if sort -k 3 /dev/null 2>&1; then + sort -k 3 + else + sort +2 + fi | + uniq > "$nlist"S; then : else grep -v "^: " < "$nlist" > "$nlist"S @@ -3315,7 +4337,7 @@ if test -f "$nlist"S; then eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$dlsyms"' else - echo '/* NONE */' >> "$output_objdir/$dlsyms" + $echo '/* NONE */' >> "$output_objdir/$dlsyms" fi $echo >> "$output_objdir/$dlsyms" "\ @@ -3367,18 +4389,18 @@ *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*) case "$compile_command " in *" -static "*) ;; - *) pic_flag_for_symtable=" $pic_flag -DPIC -DFREEBSD_WORKAROUND";; + *) pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND";; esac;; *-*-hpux*) case "$compile_command " in *" -static "*) ;; - *) pic_flag_for_symtable=" $pic_flag -DPIC";; + *) pic_flag_for_symtable=" $pic_flag";; esac esac # Now compile the dynamic symbol file. - $show "(cd $output_objdir && $CC -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")" - $run eval '(cd $output_objdir && $CC -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $? + $show "(cd $output_objdir && $LTCC -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")" + $run eval '(cd $output_objdir && $LTCC -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $? # Clean up the generated files. $show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T" @@ -3390,7 +4412,7 @@ ;; *) $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2 - exit 1 + exit $EXIT_FAILURE ;; esac else @@ -3478,7 +4500,7 @@ # Link the executable and exit $show "$link_command" $run eval "$link_command" || exit $? - exit 0 + exit $EXIT_SUCCESS fi if test "$hardcode_action" = relink; then @@ -3533,10 +4555,10 @@ fi # Quote $echo for shipping. - if test "X$echo" = "X$SHELL $0 --fallback-echo"; then - case $0 in - [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $0 --fallback-echo";; - *) qecho="$SHELL `pwd`/$0 --fallback-echo";; + if test "X$echo" = "X$SHELL $progpath --fallback-echo"; then + case $progpath in + [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";; + *) qecho="$SHELL `pwd`/$progpath --fallback-echo";; esac qecho=`$echo "X$qecho" | $Xsed -e "$sed_quote_subst"` else @@ -3548,15 +4570,230 @@ # win32 will think the script is a binary if it has # a .exe suffix, so we strip it off here. case $output in - *.exe) output=`echo $output|sed 's,.exe$,,'` ;; + *.exe) output=`$echo $output|${SED} 's,.exe$,,'` ;; esac # test for cygwin because mv fails w/o .exe extensions case $host in - *cygwin*) exeext=.exe ;; + *cygwin*) + exeext=.exe + outputname=`$echo $outputname|${SED} 's,.exe$,,'` ;; *) exeext= ;; esac + case $host in + *cygwin* | *mingw* ) + cwrappersource=`$echo ${objdir}/lt-${output}.c` + cwrapper=`$echo ${output}.exe` + $rm $cwrappersource $cwrapper + trap "$rm $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15 + + cat > $cwrappersource <> $cwrappersource<<"EOF" +#include +#include +#include +#include +#include +#include + +#if defined(PATH_MAX) +# define LT_PATHMAX PATH_MAX +#elif defined(MAXPATHLEN) +# define LT_PATHMAX MAXPATHLEN +#else +# define LT_PATHMAX 1024 +#endif + +#ifndef DIR_SEPARATOR +#define DIR_SEPARATOR '/' +#endif + +#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \ + defined (__OS2__) +#define HAVE_DOS_BASED_FILE_SYSTEM +#ifndef DIR_SEPARATOR_2 +#define DIR_SEPARATOR_2 '\\' +#endif +#endif + +#ifndef DIR_SEPARATOR_2 +# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR) +#else /* DIR_SEPARATOR_2 */ +# define IS_DIR_SEPARATOR(ch) \ + (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2)) +#endif /* DIR_SEPARATOR_2 */ + +#define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type))) +#define XFREE(stale) do { \ + if (stale) { free ((void *) stale); stale = 0; } \ +} while (0) + +const char *program_name = NULL; + +void * xmalloc (size_t num); +char * xstrdup (const char *string); +char * basename (const char *name); +char * fnqualify(const char *path); +char * strendzap(char *str, const char *pat); +void lt_fatal (const char *message, ...); + +int +main (int argc, char *argv[]) +{ + char **newargz; + int i; + + program_name = (char *) xstrdup ((char *) basename (argv[0])); + newargz = XMALLOC(char *, argc+2); +EOF + + cat >> $cwrappersource <> $cwrappersource <<"EOF" + newargz[1] = fnqualify(argv[0]); + /* we know the script has the same name, without the .exe */ + /* so make sure newargz[1] doesn't end in .exe */ + strendzap(newargz[1],".exe"); + for (i = 1; i < argc; i++) + newargz[i+1] = xstrdup(argv[i]); + newargz[argc+1] = NULL; +EOF + + cat >> $cwrappersource <> $cwrappersource <<"EOF" +} + +void * +xmalloc (size_t num) +{ + void * p = (void *) malloc (num); + if (!p) + lt_fatal ("Memory exhausted"); + + return p; +} + +char * +xstrdup (const char *string) +{ + return string ? strcpy ((char *) xmalloc (strlen (string) + 1), string) : NULL +; +} + +char * +basename (const char *name) +{ + const char *base; + +#if defined (HAVE_DOS_BASED_FILE_SYSTEM) + /* Skip over the disk name in MSDOS pathnames. */ + if (isalpha (name[0]) && name[1] == ':') + name += 2; +#endif + + for (base = name; *name; name++) + if (IS_DIR_SEPARATOR (*name)) + base = name + 1; + return (char *) base; +} + +char * +fnqualify(const char *path) +{ + size_t size; + char *p; + char tmp[LT_PATHMAX + 1]; + + assert(path != NULL); + + /* Is it qualified already? */ +#if defined (HAVE_DOS_BASED_FILE_SYSTEM) + if (isalpha (path[0]) && path[1] == ':') + return xstrdup (path); +#endif + if (IS_DIR_SEPARATOR (path[0])) + return xstrdup (path); + + /* prepend the current directory */ + /* doesn't handle '~' */ + if (getcwd (tmp, LT_PATHMAX) == NULL) + lt_fatal ("getcwd failed"); + size = strlen(tmp) + 1 + strlen(path) + 1; /* +2 for '/' and '\0' */ + p = XMALLOC(char, size); + sprintf(p, "%s%c%s", tmp, DIR_SEPARATOR, path); + return p; +} + +char * +strendzap(char *str, const char *pat) +{ + size_t len, patlen; + + assert(str != NULL); + assert(pat != NULL); + + len = strlen(str); + patlen = strlen(pat); + + if (patlen <= len) + { + str += len - patlen; + if (strcmp(str, pat) == 0) + *str = '\0'; + } + return str; +} + +static void +lt_error_core (int exit_status, const char * mode, + const char * message, va_list ap) +{ + fprintf (stderr, "%s: %s: ", program_name, mode); + vfprintf (stderr, message, ap); + fprintf (stderr, ".\n"); + + if (exit_status >= 0) + exit (exit_status); +} + +void +lt_fatal (const char *message, ...) +{ + va_list ap; + va_start (ap, message); + lt_error_core (EXIT_FAILURE, "FATAL", message, ap); + va_end (ap); +} +EOF + # we should really use a build-platform specific compiler + # here, but OTOH, the wrappers (shell script and this C one) + # are only useful if you want to execute the "real" binary. + # Since the "real" binary is built for $host, then this + # wrapper might as well be built for $host, too. + $run $LTCC -s -o $cwrapper $cwrappersource + ;; + esac $rm $output - trap "$rm $output; exit 1" 1 2 15 + trap "$rm $output; exit $EXIT_FAILURE" 1 2 15 $echo > $output "\ #! $SHELL @@ -3572,7 +4809,7 @@ # Sed substitution that helps us do robust quoting. It backslashifies # metacharacters that are still active within double-quoted strings. -Xsed='sed -e 1s/^X//' +Xsed='${SED} -e 1s/^X//' sed_quote_subst='$sed_quote_subst' # The HP-UX ksh and POSIX shell print the target directory to stdout @@ -3610,7 +4847,7 @@ test \"x\$thisdir\" = \"x\$file\" && thisdir=. # Follow symbolic links until we get to the real thisdir. - file=\`ls -ld \"\$file\" | sed -n 's/.*-> //p'\` + file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\` while test -n \"\$file\"; do destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\` @@ -3623,7 +4860,7 @@ fi file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\` - file=\`ls -ld \"\$thisdir/\$file\" | sed -n 's/.*-> //p'\` + file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\` done # Try to get the absolute directory name. @@ -3632,12 +4869,12 @@ " if test "$fast_install" = yes; then - echo >> $output "\ + $echo >> $output "\ program=lt-'$outputname'$exeext progdir=\"\$thisdir/$objdir\" if test ! -f \"\$progdir/\$program\" || \\ - { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | sed 1q\`; \\ + { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\ test \"X\$file\" != \"X\$progdir/\$program\"; }; then file=\"\$\$-\$program\" @@ -3648,7 +4885,7 @@ $rm \"\$progdir/\$file\" fi" - echo >> $output "\ + $echo >> $output "\ # relink executable if necessary if test -n \"\$relink_command\"; then @@ -3656,7 +4893,7 @@ else $echo \"\$relink_command_output\" >&2 $rm \"\$progdir/\$file\" - exit 1 + exit $EXIT_FAILURE fi fi @@ -3666,13 +4903,13 @@ $rm \"\$progdir/\$file\" fi" else - echo >> $output "\ + $echo >> $output "\ program='$outputname' progdir=\"\$thisdir/$objdir\" " fi - echo >> $output "\ + $echo >> $output "\ if test -f \"\$progdir/\$program\"; then" @@ -3703,14 +4940,6 @@ # Run the actual program with our arguments. " case $host in - # win32 systems need to use the prog path for dll - # lookup to work - *-*-cygwin* | *-*-pw32*) - $echo >> $output "\ - exec \$progdir/\$program \${1+\"\$@\"} -" - ;; - # Backslashes separate directories on plain windows *-*-mingw | *-*-os2*) $echo >> $output "\ @@ -3720,30 +4949,26 @@ *) $echo >> $output "\ - # Export the path to the program. - PATH=\"\$progdir:\$PATH\" - export PATH - - exec \$program \${1+\"\$@\"} + exec \$progdir/\$program \${1+\"\$@\"} " ;; esac $echo >> $output "\ \$echo \"\$0: cannot exec \$program \${1+\"\$@\"}\" - exit 1 + exit $EXIT_FAILURE fi else # The program doesn't exist. \$echo \"\$0: error: \$progdir/\$program does not exist\" 1>&2 \$echo \"This script is just a wrapper for \$program.\" 1>&2 - echo \"See the $PACKAGE documentation for more information.\" 1>&2 - exit 1 + $echo \"See the $PACKAGE documentation for more information.\" 1>&2 + exit $EXIT_FAILURE fi fi\ " chmod +x $output fi - exit 0 + exit $EXIT_SUCCESS ;; esac @@ -3759,7 +4984,7 @@ oldobjs="$libobjs_save" build_libtool_libs=no else - oldobjs="$objs$old_deplibs "`$echo "X$libobjs_save" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP` + oldobjs="$old_deplibs $non_pic_objects" fi addlibs="$old_convenience" fi @@ -3768,8 +4993,8 @@ gentop="$output_objdir/${outputname}x" $show "${rm}r $gentop" $run ${rm}r "$gentop" - $show "mkdir $gentop" - $run mkdir "$gentop" + $show "$mkdir $gentop" + $run $mkdir "$gentop" status=$? if test "$status" -ne 0 && test ! -d "$gentop"; then exit $status @@ -3788,14 +5013,40 @@ $show "${rm}r $xdir" $run ${rm}r "$xdir" - $show "mkdir $xdir" - $run mkdir "$xdir" + $show "$mkdir $xdir" + $run $mkdir "$xdir" status=$? if test "$status" -ne 0 && test ! -d "$xdir"; then exit $status fi + # We will extract separately just the conflicting names and we will no + # longer touch any unique names. It is faster to leave these extract + # automatically by $AR in one run. $show "(cd $xdir && $AR x $xabs)" $run eval "(cd \$xdir && $AR x \$xabs)" || exit $? + if ($AR t "$xabs" | sort | sort -uc >/dev/null 2>&1); then + : + else + $echo "$modename: warning: object name conflicts; renaming object files" 1>&2 + $echo "$modename: warning: to ensure that they will not overwrite" 1>&2 + $AR t "$xabs" | sort | uniq -cd | while read -r count name + do + i=1 + while test "$i" -le "$count" + do + # Put our $i before any first dot (extension) + # Never overwrite any file + name_to="$name" + while test "X$name_to" = "X$name" || test -f "$xdir/$name_to" + do + name_to=`$echo "X$name_to" | $Xsed -e "s/\([^.]*\)/\1-$i/"` + done + $show "(cd $xdir && $AR xN $i $xabs '$name' && $mv '$name' '$name_to')" + $run eval "(cd \$xdir && $AR xN $i \$xabs '$name' && $mv '$name' '$name_to')" || exit $? + i=`expr $i + 1` + done + done + fi oldobjs="$oldobjs "`find $xdir -name \*.${objext} -print -o -name \*.lo -print | $NL2SP` done @@ -3803,30 +5054,71 @@ # Do each command in the archive commands. if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then - eval cmds=\"$old_archive_from_new_cmds\" + cmds=$old_archive_from_new_cmds else - # Ensure that we have .o objects in place in case we decided - # not to build a shared library, and have fallen back to building - # static libs even though --disable-static was passed! - for oldobj in $oldobjs; do - if test ! -f $oldobj; then - xdir=`$echo "X$oldobj" | $Xsed -e 's%/[^/]*$%%'` - if test "X$xdir" = "X$oldobj"; then - xdir="." + eval cmds=\"$old_archive_cmds\" + + if len=`expr "X$cmds" : ".*"` && + test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then + cmds=$old_archive_cmds + else + # the command line is too long to link in one step, link in parts + $echo "using piecewise archive linking..." + save_RANLIB=$RANLIB + RANLIB=: + objlist= + concat_cmds= + save_oldobjs=$oldobjs + # GNU ar 2.10+ was changed to match POSIX; thus no paths are + # encoded into archives. This makes 'ar r' malfunction in + # this piecewise linking case whenever conflicting object + # names appear in distinct ar calls; check, warn and compensate. + if (for obj in $save_oldobjs + do + $echo "X$obj" | $Xsed -e 's%^.*/%%' + done | sort | sort -uc >/dev/null 2>&1); then + : + else + $echo "$modename: warning: object name conflicts; overriding AR_FLAGS to 'cq'" 1>&2 + $echo "$modename: warning: to ensure that POSIX-compatible ar will work" 1>&2 + AR_FLAGS=cq + fi + # Is there a better way of finding the last object in the list? + for obj in $save_oldobjs + do + last_oldobj=$obj + done + for obj in $save_oldobjs + do + oldobjs="$objlist $obj" + objlist="$objlist $obj" + eval test_cmds=\"$old_archive_cmds\" + if len=`expr "X$test_cmds" : ".*"` && + test "$len" -le "$max_cmd_len"; then + : else - xdir="$xdir" + # the above command should be used before it gets too long + oldobjs=$objlist + if test "$obj" = "$last_oldobj" ; then + RANLIB=$save_RANLIB + fi + test -z "$concat_cmds" || concat_cmds=$concat_cmds~ + eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\" + objlist= fi - baseobj=`$echo "X$oldobj" | $Xsed -e 's%^.*/%%'` - obj=`$echo "X$baseobj" | $Xsed -e "$o2lo"` - $show "(cd $xdir && ${LN_S} $obj $baseobj)" - $run eval '(cd $xdir && ${LN_S} $obj $baseobj)' || exit $? + done + RANLIB=$save_RANLIB + oldobjs=$objlist + if test "X$oldobjs" = "X" ; then + eval cmds=\"\$concat_cmds\" + else + eval cmds=\"\$concat_cmds~\$old_archive_cmds\" fi - done - - eval cmds=\"$old_archive_cmds\" + fi fi save_ifs="$IFS"; IFS='~' for cmd in $cmds; do + eval cmd=\"$cmd\" IFS="$save_ifs" $show "$cmd" $run eval "$cmd" || exit $? @@ -3858,8 +5150,12 @@ fi done # Quote the link command for shipping. - relink_command="(cd `pwd`; $SHELL $0 --mode=relink $libtool_args)" + relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)" relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"` + if test "$hardcode_automatic" = yes ; then + relink_command= + fi + # Only create the output if not a dry run. if test -z "$run"; then @@ -3875,10 +5171,10 @@ case $deplib in *.la) name=`$echo "X$deplib" | $Xsed -e 's%^.*/%%'` - eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` if test -z "$libdir"; then $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2 - exit 1 + exit $EXIT_FAILURE fi newdependency_libs="$newdependency_libs $libdir/$name" ;; @@ -3889,10 +5185,10 @@ newdlfiles= for lib in $dlfiles; do name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` - eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $lib` + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` if test -z "$libdir"; then $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 - exit 1 + exit $EXIT_FAILURE fi newdlfiles="$newdlfiles $libdir/$name" done @@ -3900,20 +5196,39 @@ newdlprefiles= for lib in $dlprefiles; do name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` - eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $lib` + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` if test -z "$libdir"; then $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 - exit 1 + exit $EXIT_FAILURE fi newdlprefiles="$newdlprefiles $libdir/$name" done dlprefiles="$newdlprefiles" + else + newdlfiles= + for lib in $dlfiles; do + case $lib in + [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; + *) abs=`pwd`"/$lib" ;; + esac + newdlfiles="$newdlfiles $abs" + done + dlfiles="$newdlfiles" + newdlprefiles= + for lib in $dlprefiles; do + case $lib in + [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; + *) abs=`pwd`"/$lib" ;; + esac + newdlprefiles="$newdlprefiles $abs" + done + dlprefiles="$newdlprefiles" fi $rm $output # place dlname in correct position for cygwin tdlname=$dlname case $host,$output,$installed,$module,$dlname in - *cygwin*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;; + *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;; esac $echo > $output "\ # $outputname - a libtool library file @@ -3942,6 +5257,9 @@ # Is this an already installed library? installed=$installed +# Should we warn about portability when linking against -modules? +shouldnotlink=$module + # Files to dlopen/dlpreopen dlopen='$dlfiles' dlpreopen='$dlprefiles' @@ -3961,7 +5279,7 @@ $run eval '(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)' || exit $? ;; esac - exit 0 + exit $EXIT_SUCCESS ;; # libtool install mode @@ -4050,13 +5368,13 @@ if test -z "$install_prog"; then $echo "$modename: you must specify an install program" 1>&2 $echo "$help" 1>&2 - exit 1 + exit $EXIT_FAILURE fi if test -n "$prev"; then $echo "$modename: the \`$prev' option requires an argument" 1>&2 $echo "$help" 1>&2 - exit 1 + exit $EXIT_FAILURE fi if test -z "$files"; then @@ -4066,7 +5384,7 @@ $echo "$modename: you must specify a destination" 1>&2 fi $echo "$help" 1>&2 - exit 1 + exit $EXIT_FAILURE fi # Strip any trailing slash from the destination. @@ -4087,7 +5405,7 @@ if test "$#" -gt 2; then $echo "$modename: \`$dest' is not a directory" 1>&2 $echo "$help" 1>&2 - exit 1 + exit $EXIT_FAILURE fi fi case $destdir in @@ -4099,7 +5417,7 @@ *) $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2 $echo "$help" 1>&2 - exit 1 + exit $EXIT_FAILURE ;; esac done @@ -4124,11 +5442,11 @@ *.la) # Check to see that this really is a libtool archive. - if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : + if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : else $echo "$modename: \`$file' is not a valid libtool archive" 1>&2 $echo "$help" 1>&2 - exit 1 + exit $EXIT_FAILURE fi library_names= @@ -4159,12 +5477,33 @@ dir="$dir$objdir" if test -n "$relink_command"; then + # Determine the prefix the user has applied to our future dir. + inst_prefix_dir=`$echo "$destdir" | $SED "s%$libdir\$%%"` + + # Don't allow the user to place us outside of our expected + # location b/c this prevents finding dependent libraries that + # are installed to the same prefix. + # At present, this check doesn't affect windows .dll's that + # are installed into $libdir/../bin (currently, that works fine) + # but it's something to keep an eye on. + if test "$inst_prefix_dir" = "$destdir"; then + $echo "$modename: error: cannot install \`$file' to a directory not ending in $libdir" 1>&2 + exit $EXIT_FAILURE + fi + + if test -n "$inst_prefix_dir"; then + # Stick the inst_prefix_dir data into the link command. + relink_command=`$echo "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"` + else + relink_command=`$echo "$relink_command" | $SED "s%@inst_prefix_dir@%%"` + fi + $echo "$modename: warning: relinking \`$file'" 1>&2 $show "$relink_command" if $run eval "$relink_command"; then : else $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2 - continue + exit $EXIT_FAILURE fi fi @@ -4199,10 +5538,11 @@ # Do each command in the postinstall commands. lib="$destdir/$realname" - eval cmds=\"$postinstall_cmds\" + cmds=$postinstall_cmds save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" + eval cmd=\"$cmd\" $show "$cmd" $run eval "$cmd" || exit $? done @@ -4242,7 +5582,7 @@ *) $echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2 $echo "$help" 1>&2 - exit 1 + exit $EXIT_FAILURE ;; esac @@ -4260,7 +5600,7 @@ $show "$install_prog $staticobj $staticdest" $run eval "$install_prog \$staticobj \$staticdest" || exit $? fi - exit 0 + exit $EXIT_SUCCESS ;; *) @@ -4272,21 +5612,49 @@ destfile="$destdir/$destfile" fi + # If the file is missing, and there is a .exe on the end, strip it + # because it is most likely a libtool script we actually want to + # install + stripped_ext="" + case $file in + *.exe) + if test ! -f "$file"; then + file=`$echo $file|${SED} 's,.exe$,,'` + stripped_ext=".exe" + fi + ;; + esac + # Do a test to see if this is really a libtool program. - if (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then + case $host in + *cygwin*|*mingw*) + wrapper=`$echo $file | ${SED} -e 's,.exe$,,'` + ;; + *) + wrapper=$file + ;; + esac + if (${SED} -e '4q' $wrapper | grep "^# Generated by .*$PACKAGE")>/dev/null 2>&1; then notinst_deplibs= relink_command= + # To insure that "foo" is sourced, and not "foo.exe", + # finese the cygwin/MSYS system by explicitly sourcing "foo." + # which disallows the automatic-append-.exe behavior. + case $build in + *cygwin* | *mingw*) wrapperdot=${wrapper}. ;; + *) wrapperdot=${wrapper} ;; + esac # If there is no directory component, then add one. case $file in - */* | *\\*) . $file ;; - *) . ./$file ;; + */* | *\\*) . ${wrapperdot} ;; + *) . ./${wrapperdot} ;; esac # Check the variables that should have been set. if test -z "$notinst_deplibs"; then - $echo "$modename: invalid libtool wrapper script \`$file'" 1>&2 - exit 1 + $echo "$modename: invalid libtool wrapper script \`$wrapper'" 1>&2 + exit $EXIT_FAILURE fi finalize=yes @@ -4308,10 +5676,17 @@ done relink_command= + # To insure that "foo" is sourced, and not "foo.exe", + # finese the cygwin/MSYS system by explicitly sourcing "foo." + # which disallows the automatic-append-.exe behavior. + case $build in + *cygwin* | *mingw*) wrapperdot=${wrapper}. ;; + *) wrapperdot=${wrapper} ;; + esac # If there is no directory component, then add one. case $file in - */* | *\\*) . $file ;; - *) . ./$file ;; + */* | *\\*) . ${wrapperdot} ;; + *) . ./${wrapperdot} ;; esac outputname= @@ -4319,17 +5694,17 @@ if test "$finalize" = yes && test -z "$run"; then tmpdir="/tmp" test -n "$TMPDIR" && tmpdir="$TMPDIR" - tmpdir=`mktemp -d $tmpdir/libtool-XXXXXX 2> /dev/null` - if test $? = 0 ; then : - else - tmpdir="$tmpdir/libtool-$$" - fi - if $mkdir -p "$tmpdir" && chmod 700 "$tmpdir"; then : + tmpdir="$tmpdir/libtool-$$" + save_umask=`umask` + umask 0077 + if $mkdir "$tmpdir"; then + umask $save_umask else + umask $save_umask $echo "$modename: error: cannot create temporary directory \`$tmpdir'" 1>&2 continue fi - file=`$echo "X$file" | $Xsed -e 's%^.*/%%'` + file=`$echo "X$file$stripped_ext" | $Xsed -e 's%^.*/%%'` outputname="$tmpdir/$file" # Replace the output file specification. relink_command=`$echo "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'` @@ -4347,14 +5722,14 @@ fi else # Install the binary that we compiled earlier. - file=`$echo "X$file" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"` + file=`$echo "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"` fi fi # remove .exe since cygwin /usr/bin/install will append another # one anyways case $install_prog,$host in - /usr/bin/install*,*cygwin*) + */usr/bin/install*,*cygwin*) case $file:$destfile in *.exe:*.exe) # this is ok @@ -4363,7 +5738,7 @@ destfile=$destfile.exe ;; *:*.exe) - destfile=`echo $destfile | sed -e 's,.exe$,,'` + destfile=`$echo $destfile | ${SED} -e 's,.exe$,,'` ;; esac ;; @@ -4384,16 +5759,17 @@ $show "$install_prog $file $oldlib" $run eval "$install_prog \$file \$oldlib" || exit $? - if test -n "$stripme" && test -n "$striplib"; then + if test -n "$stripme" && test -n "$old_striplib"; then $show "$old_striplib $oldlib" $run eval "$old_striplib $oldlib" || exit $? fi # Do each command in the postinstall commands. - eval cmds=\"$old_postinstall_cmds\" + cmds=$old_postinstall_cmds save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" + eval cmd=\"$cmd\" $show "$cmd" $run eval "$cmd" || exit $? done @@ -4407,9 +5783,9 @@ if test -n "$current_libdirs"; then # Maybe just do a dry run. test -n "$run" && current_libdirs=" -n$current_libdirs" - exec_cmd='$SHELL $0 --finish$current_libdirs' + exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs' else - exit 0 + exit $EXIT_SUCCESS fi ;; @@ -4428,10 +5804,11 @@ for libdir in $libdirs; do if test -n "$finish_cmds"; then # Do each command in the finish commands. - eval cmds=\"$finish_cmds\" + cmds=$finish_cmds save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" + eval cmd=\"$cmd\" $show "$cmd" $run eval "$cmd" || admincmds="$admincmds $cmd" @@ -4448,43 +5825,43 @@ fi # Exit here if they wanted silent mode. - test "$show" = : && exit 0 + test "$show" = : && exit $EXIT_SUCCESS - echo "----------------------------------------------------------------------" - echo "Libraries have been installed in:" + $echo "----------------------------------------------------------------------" + $echo "Libraries have been installed in:" for libdir in $libdirs; do - echo " $libdir" + $echo " $libdir" done - echo - echo "If you ever happen to want to link against installed libraries" - echo "in a given directory, LIBDIR, you must either use libtool, and" - echo "specify the full pathname of the library, or use the \`-LLIBDIR'" - echo "flag during linking and do at least one of the following:" + $echo + $echo "If you ever happen to want to link against installed libraries" + $echo "in a given directory, LIBDIR, you must either use libtool, and" + $echo "specify the full pathname of the library, or use the \`-LLIBDIR'" + $echo "flag during linking and do at least one of the following:" if test -n "$shlibpath_var"; then - echo " - add LIBDIR to the \`$shlibpath_var' environment variable" - echo " during execution" + $echo " - add LIBDIR to the \`$shlibpath_var' environment variable" + $echo " during execution" fi if test -n "$runpath_var"; then - echo " - add LIBDIR to the \`$runpath_var' environment variable" - echo " during linking" + $echo " - add LIBDIR to the \`$runpath_var' environment variable" + $echo " during linking" fi if test -n "$hardcode_libdir_flag_spec"; then libdir=LIBDIR eval flag=\"$hardcode_libdir_flag_spec\" - echo " - use the \`$flag' linker flag" + $echo " - use the \`$flag' linker flag" fi if test -n "$admincmds"; then - echo " - have your system administrator run these commands:$admincmds" + $echo " - have your system administrator run these commands:$admincmds" fi if test -f /etc/ld.so.conf; then - echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'" + $echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'" fi - echo - echo "See any operating system documentation about shared libraries for" - echo "more information, such as the ld(1) and ld.so(8) manual pages." - echo "----------------------------------------------------------------------" - exit 0 + $echo + $echo "See any operating system documentation about shared libraries for" + $echo "more information, such as the ld(1) and ld.so(8) manual pages." + $echo "----------------------------------------------------------------------" + exit $EXIT_SUCCESS ;; # libtool execute mode @@ -4496,7 +5873,7 @@ if test -z "$cmd"; then $echo "$modename: you must specify a COMMAND" 1>&2 $echo "$help" - exit 1 + exit $EXIT_FAILURE fi # Handle -dlopen flags immediately. @@ -4504,18 +5881,18 @@ if test ! -f "$file"; then $echo "$modename: \`$file' is not a file" 1>&2 $echo "$help" 1>&2 - exit 1 + exit $EXIT_FAILURE fi dir= case $file in *.la) # Check to see that this really is a libtool archive. - if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : + if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : else $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 $echo "$help" 1>&2 - exit 1 + exit $EXIT_FAILURE fi # Read the libtool library. @@ -4542,7 +5919,7 @@ dir="$dir/$objdir" else $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2 - exit 1 + exit $EXIT_FAILURE fi ;; @@ -4582,7 +5959,7 @@ -*) ;; *) # Do a test to see if this is really a libtool program. - if (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then + if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then # If there is no directory component, then add one. case $file in */* | *\\*) . $file ;; @@ -4605,7 +5982,7 @@ eval "export $shlibpath_var" fi - # Restore saved enviroment variables + # Restore saved environment variables if test "${save_LC_ALL+set}" = set; then LC_ALL="$save_LC_ALL"; export LC_ALL fi @@ -4622,7 +5999,7 @@ $echo "export $shlibpath_var" fi $echo "$cmd$args" - exit 0 + exit $EXIT_SUCCESS fi ;; @@ -4650,18 +6027,19 @@ if test -z "$rm"; then $echo "$modename: you must specify an RM program" 1>&2 $echo "$help" 1>&2 - exit 1 + exit $EXIT_FAILURE fi rmdirs= + origobjdir="$objdir" for file in $files; do dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` if test "X$dir" = "X$file"; then dir=. - objdir="$objdir" + objdir="$origobjdir" else - objdir="$dir/$objdir" + objdir="$dir/$origobjdir" fi name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` test "$mode" = uninstall && objdir="$dir" @@ -4691,7 +6069,7 @@ case $name in *.la) # Possibly a libtool archive, so verify it. - if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then + if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then . $dir/$name # Delete the libtool libraries and symlinks. @@ -4704,10 +6082,11 @@ if test "$mode" = uninstall; then if test -n "$library_names"; then # Do each command in the postuninstall commands. - eval cmds=\"$postuninstall_cmds\" + cmds=$postuninstall_cmds save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" + eval cmd=\"$cmd\" $show "$cmd" $run eval "$cmd" if test "$?" -ne 0 && test "$rmforce" != yes; then @@ -4719,10 +6098,11 @@ if test -n "$old_library"; then # Do each command in the old_postuninstall commands. - eval cmds=\"$old_postuninstall_cmds\" + cmds=$old_postuninstall_cmds save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" + eval cmd=\"$cmd\" $show "$cmd" $run eval "$cmd" if test "$?" -ne 0 && test "$rmforce" != yes; then @@ -4737,22 +6117,52 @@ ;; *.lo) - if test "$build_old_libs" = yes; then - oldobj=`$echo "X$name" | $Xsed -e "$lo2o"` - rmfiles="$rmfiles $dir/$oldobj" + # Possibly a libtool object, so verify it. + if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then + + # Read the .lo file + . $dir/$name + + # Add PIC object to the list of files to remove. + if test -n "$pic_object" \ + && test "$pic_object" != none; then + rmfiles="$rmfiles $dir/$pic_object" + fi + + # Add non-PIC object to the list of files to remove. + if test -n "$non_pic_object" \ + && test "$non_pic_object" != none; then + rmfiles="$rmfiles $dir/$non_pic_object" + fi fi ;; *) - # Do a test to see if this is a libtool program. - if test "$mode" = clean && - (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then - relink_command= - . $dir/$file + if test "$mode" = clean ; then + noexename=$name + case $file in + *.exe) + file=`$echo $file|${SED} 's,.exe$,,'` + noexename=`$echo $name|${SED} 's,.exe$,,'` + # $file with .exe has already been added to rmfiles, + # add $file without .exe + rmfiles="$rmfiles $file" + ;; + esac + # Do a test to see if this is a libtool program. + if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then + relink_command= + . $dir/$noexename - rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}" - if test "$fast_install" = yes && test -n "$relink_command"; then - rmfiles="$rmfiles $objdir/lt-$name" + # note $name still contains .exe if it was in $file originally + # as does the version of $file that was added into $rmfiles + rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}" + if test "$fast_install" = yes && test -n "$relink_command"; then + rmfiles="$rmfiles $objdir/lt-$name" + fi + if test "X$noexename" != "X$name" ; then + rmfiles="$rmfiles $objdir/lt-${noexename}.c" + fi fi fi ;; @@ -4760,6 +6170,7 @@ $show "$rm $rmfiles" $run $rm $rmfiles || exit_status=1 done + objdir="$origobjdir" # Try to remove the ${objdir}s in the directories where we deleted files for dir in $rmdirs; do @@ -4775,20 +6186,20 @@ "") $echo "$modename: you must specify a MODE" 1>&2 $echo "$generic_help" 1>&2 - exit 1 + exit $EXIT_FAILURE ;; esac if test -z "$exec_cmd"; then $echo "$modename: invalid operation mode \`$mode'" 1>&2 $echo "$generic_help" 1>&2 - exit 1 + exit $EXIT_FAILURE fi fi # test -z "$show_help" if test -n "$exec_cmd"; then eval exec $exec_cmd - exit 1 + exit $EXIT_FAILURE fi # We need to display help for each of the modes. @@ -4807,6 +6218,7 @@ --mode=MODE use operation mode MODE [default=inferred from MODE-ARGS] --quiet same as \`--silent' --silent don't print informational messages + --tag=TAG use configuration variables from tag TAG --version print version information MODE must be one of the following: @@ -4820,8 +6232,10 @@ uninstall remove libraries from an installed directory MODE-ARGS vary depending on the MODE. Try \`$modename --help --mode=MODE' for -a more detailed description of MODE." - exit 0 +a more detailed description of MODE. + +Report bugs to ." + exit $EXIT_SUCCESS ;; clean) @@ -4932,6 +6346,9 @@ -no-install link a not-installable executable -no-undefined declare that a library does not refer to external symbols -o OUTPUT-FILE create OUTPUT-FILE from the specified objects + -objectlist FILE Use a list of object files found in FILE to specify objects + -precious-files-regex REGEX + don't remove output files matching REGEX -release RELEASE specify package release information -rpath LIBDIR the created library will eventually be installed in LIBDIR -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries @@ -4973,14 +6390,34 @@ *) $echo "$modename: invalid operation mode \`$mode'" 1>&2 $echo "$help" 1>&2 - exit 1 + exit $EXIT_FAILURE ;; esac -echo +$echo $echo "Try \`$modename --help' for more information about other modes." -exit 0 +exit $EXIT_SUCCESS + +# The TAGs below are defined such that we never get into a situation +# in which we disable both kinds of libraries. Given conflicting +# choices, we go for a static library, that is the most portable, +# since we can't tell whether shared libraries were disabled because +# the user asked for that or because the platform doesn't support +# them. This is particularly important on AIX, because we don't +# support having both static and shared libraries enabled at the same +# time on that platform, so we default to a shared-only configuration. +# If a disable-shared tag is given, we'll fallback to a static-only +# configuration. But we'll never go from static-only to shared-only. + +# ### BEGIN LIBTOOL TAG CONFIG: disable-shared +build_libtool_libs=no +build_old_libs=yes +# ### END LIBTOOL TAG CONFIG: disable-shared + +# ### BEGIN LIBTOOL TAG CONFIG: disable-static +build_old_libs=`case $build_libtool_libs in yes) $echo no;; *) $echo yes;; esac` +# ### END LIBTOOL TAG CONFIG: disable-static # Local Variables: # mode:shell-script --- tse3-0.2.7.orig/configure +++ tse3-0.2.7/configure @@ -1,178 +1,10 @@ #! /bin/sh # Guess values for system-dependent variables and create Makefiles. -# Generated by GNU Autoconf 2.53. +# Generated by GNU Autoconf 2.59. # -# Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, 2002 -# Free Software Foundation, Inc. +# Copyright (C) 2003 Free Software Foundation, Inc. # This configure script is free software; the Free Software Foundation # gives unlimited permission to copy, distribute and modify it. - -# Find the correct PATH separator. Usually this is `:', but -# DJGPP uses `;' like DOS. -if test "X${PATH_SEPARATOR+set}" != Xset; then - UNAME=${UNAME-`uname 2>/dev/null`} - case X$UNAME in - *-DOS) lt_cv_sys_path_separator=';' ;; - *) lt_cv_sys_path_separator=':' ;; - esac - PATH_SEPARATOR=$lt_cv_sys_path_separator -fi - - -# Check that we are running under the correct shell. -SHELL=${CONFIG_SHELL-/bin/sh} - -case X$ECHO in -X*--fallback-echo) - # Remove one level of quotation (which was required for Make). - ECHO=`echo "$ECHO" | sed 's,\\\\\$\\$0,'$0','` - ;; -esac - -echo=${ECHO-echo} -if test "X$1" = X--no-reexec; then - # Discard the --no-reexec flag, and continue. - shift -elif test "X$1" = X--fallback-echo; then - # Avoid inline document here, it may be left over - : -elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then - # Yippee, $echo works! - : -else - # Restart under the correct shell. - exec $SHELL "$0" --no-reexec ${1+"$@"} -fi - -if test "X$1" = X--fallback-echo; then - # used as fallback echo - shift - cat </dev/null && - echo_test_string="`eval $cmd`" && - (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null - then - break - fi - done -fi - -if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - : -else - # The Solaris, AIX, and Digital Unix default echo programs unquote - # backslashes. This makes it impossible to quote backslashes using - # echo "$something" | sed 's/\\/\\\\/g' - # - # So, first we look for a working echo in the user's PATH. - - IFS="${IFS= }"; save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for dir in $PATH /usr/ucb; do - if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && - test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - echo="$dir/echo" - break - fi - done - IFS="$save_ifs" - - if test "X$echo" = Xecho; then - # We didn't find a better echo, so look for alternatives. - if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - # This shell has a builtin print -r that does the trick. - echo='print -r' - elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) && - test "X$CONFIG_SHELL" != X/bin/ksh; then - # If we have ksh, try running configure again with it. - ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} - export ORIGINAL_CONFIG_SHELL - CONFIG_SHELL=/bin/ksh - export CONFIG_SHELL - exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"} - else - # Try using printf. - echo='printf %s\n' - if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - # Cool, printf works - : - elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` && - test "X$echo_testing_string" = 'X\t' && - echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL - export CONFIG_SHELL - SHELL="$CONFIG_SHELL" - export SHELL - echo="$CONFIG_SHELL $0 --fallback-echo" - elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` && - test "X$echo_testing_string" = 'X\t' && - echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - echo="$CONFIG_SHELL $0 --fallback-echo" - else - # maybe with a smaller string... - prev=: - - for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do - if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null - then - break - fi - prev="$cmd" - done - - if test "$prev" != 'sed 50q "$0"'; then - echo_test_string=`eval $prev` - export echo_test_string - exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"} - else - # Oops. We lost completely, so just stick with echo. - echo=echo - fi - fi - fi - fi -fi -fi - -# Copy echo and quote the copy suitably for passing to libtool from -# the Makefile, instead of quoting the original, which is used later. -ECHO=$echo -if test "X$ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then - ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo" -fi - - - -if expr a : '\(a\)' >/dev/null 2>&1; then - as_expr=expr -else - as_expr=false -fi - - ## --------------------- ## ## M4sh Initialization. ## ## --------------------- ## @@ -181,46 +13,57 @@ if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then emulate sh NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then set -o posix fi +DUALCASE=1; export DUALCASE # for MKS sh -# NLS nuisances. # Support unset when possible. -if (FOO=FOO; unset FOO) >/dev/null 2>&1; then +if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then as_unset=unset else as_unset=false fi -(set +x; test -n "`(LANG=C; export LANG) 2>&1`") && - { $as_unset LANG || test "${LANG+set}" != set; } || - { LANG=C; export LANG; } -(set +x; test -n "`(LC_ALL=C; export LC_ALL) 2>&1`") && - { $as_unset LC_ALL || test "${LC_ALL+set}" != set; } || - { LC_ALL=C; export LC_ALL; } -(set +x; test -n "`(LC_TIME=C; export LC_TIME) 2>&1`") && - { $as_unset LC_TIME || test "${LC_TIME+set}" != set; } || - { LC_TIME=C; export LC_TIME; } -(set +x; test -n "`(LC_CTYPE=C; export LC_CTYPE) 2>&1`") && - { $as_unset LC_CTYPE || test "${LC_CTYPE+set}" != set; } || - { LC_CTYPE=C; export LC_CTYPE; } -(set +x; test -n "`(LANGUAGE=C; export LANGUAGE) 2>&1`") && - { $as_unset LANGUAGE || test "${LANGUAGE+set}" != set; } || - { LANGUAGE=C; export LANGUAGE; } -(set +x; test -n "`(LC_COLLATE=C; export LC_COLLATE) 2>&1`") && - { $as_unset LC_COLLATE || test "${LC_COLLATE+set}" != set; } || - { LC_COLLATE=C; export LC_COLLATE; } -(set +x; test -n "`(LC_NUMERIC=C; export LC_NUMERIC) 2>&1`") && - { $as_unset LC_NUMERIC || test "${LC_NUMERIC+set}" != set; } || - { LC_NUMERIC=C; export LC_NUMERIC; } -(set +x; test -n "`(LC_MESSAGES=C; export LC_MESSAGES) 2>&1`") && - { $as_unset LC_MESSAGES || test "${LC_MESSAGES+set}" != set; } || - { LC_MESSAGES=C; export LC_MESSAGES; } + +# Work around bugs in pre-3.0 UWIN ksh. +$as_unset ENV MAIL MAILPATH +PS1='$ ' +PS2='> ' +PS4='+ ' + +# NLS nuisances. +for as_var in \ + LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ + LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ + LC_TELEPHONE LC_TIME +do + if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then + eval $as_var=C; export $as_var + else + $as_unset $as_var + fi +done + +# Required to use basename. +if expr a : '\(a\)' >/dev/null 2>&1; then + as_expr=expr +else + as_expr=false +fi + +if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi # Name of the executable. -as_me=`(basename "$0") 2>/dev/null || +as_me=`$as_basename "$0" || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ X"$0" : 'X\(/\)$' \| \ @@ -231,6 +74,7 @@ /^X\/\(\/\).*/{ s//\1/; q; } s/.*/./; q'` + # PATH needs CR, and LINENO needs CR and PATH. # Avoid depending upon Character Ranges. as_cr_letters='abcdefghijklmnopqrstuvwxyz' @@ -241,15 +85,15 @@ # The user is always right. if test "${PATH_SEPARATOR+set}" != set; then - echo "#! /bin/sh" >conftest.sh - echo "exit 0" >>conftest.sh - chmod +x conftest.sh - if (PATH=".;."; conftest.sh) >/dev/null 2>&1; then + echo "#! /bin/sh" >conf$$.sh + echo "exit 0" >>conf$$.sh + chmod +x conf$$.sh + if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then PATH_SEPARATOR=';' else PATH_SEPARATOR=: fi - rm -f conftest.sh + rm -f conf$$.sh fi @@ -297,6 +141,8 @@ as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` test "x$as_lineno_1" != "x$as_lineno_2" && test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then + $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } + $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } CONFIG_SHELL=$as_dir/$as_base export CONFIG_SHELL exec "$CONFIG_SHELL" "$0" ${1+"$@"} @@ -369,13 +215,20 @@ fi rm -f conf$$ conf$$.exe conf$$.file +if mkdir -p . 2>/dev/null; then + as_mkdir_p=: +else + test -d ./-p && rmdir ./-p + as_mkdir_p=false +fi + as_executable_p="test -f" # Sed expression to map a string onto a valid CPP name. -as_tr_cpp="sed y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g" +as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" # Sed expression to map a string onto a valid variable name. -as_tr_sh="sed y%*+%pp%;s%[^_$as_cr_alnum]%_%g" +as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" # IFS @@ -385,76 +238,233 @@ IFS=" $as_nl" # CDPATH. -$as_unset CDPATH || test "${CDPATH+set}" != set || { CDPATH=$PATH_SEPARATOR; export CDPATH; } +$as_unset CDPATH -# Name of the host. -# hostname on some systems (SVR3.2, Linux) returns a bogus exit status, -# so uname gets run too. -ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` - -exec 6>&1 -# -# Initializations. -# -ac_default_prefix=/usr/local -cross_compiling=no -subdirs= -MFLAGS= -MAKEFLAGS= +# Check that we are running under the correct shell. SHELL=${CONFIG_SHELL-/bin/sh} -# Maximum number of lines to put in a shell here document. -# This variable seems obsolete. It should probably be removed, and -# only ac_max_sed_lines should be used. -: ${ac_max_here_lines=38} +case X$ECHO in +X*--fallback-echo) + # Remove one level of quotation (which was required for Make). + ECHO=`echo "$ECHO" | sed 's,\\\\\$\\$0,'$0','` + ;; +esac -# Identity of this package. -PACKAGE_NAME= -PACKAGE_TARNAME= -PACKAGE_VERSION= -PACKAGE_STRING= -PACKAGE_BUGREPORT= +echo=${ECHO-echo} +if test "X$1" = X--no-reexec; then + # Discard the --no-reexec flag, and continue. + shift +elif test "X$1" = X--fallback-echo; then + # Avoid inline document here, it may be left over + : +elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then + # Yippee, $echo works! + : +else + # Restart under the correct shell. + exec $SHELL "$0" --no-reexec ${1+"$@"} +fi -ac_unique_file="Makefile.am" -# Factoring default headers for most tests. -ac_includes_default="\ -#include -#if HAVE_SYS_TYPES_H -# include -#endif -#if HAVE_SYS_STAT_H -# include -#endif -#if STDC_HEADERS -# include -# include -#else -# if HAVE_STDLIB_H -# include -# endif -#endif -#if HAVE_STRING_H -# if !STDC_HEADERS && HAVE_MEMORY_H -# include -# endif -# include -#endif -#if HAVE_STRINGS_H -# include -#endif -#if HAVE_INTTYPES_H -# include -#else -# if HAVE_STDINT_H -# include -# endif -#endif +if test "X$1" = X--fallback-echo; then + # used as fallback echo + shift + cat </dev/null && + echo_test_string="`eval $cmd`" && + (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null + then + break + fi + done +fi + +if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + : +else + # The Solaris, AIX, and Digital Unix default echo programs unquote + # backslashes. This makes it impossible to quote backslashes using + # echo "$something" | sed 's/\\/\\\\/g' + # + # So, first we look for a working echo in the user's PATH. + + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for dir in $PATH /usr/ucb; do + IFS="$lt_save_ifs" + if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && + test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + echo="$dir/echo" + break + fi + done + IFS="$lt_save_ifs" + + if test "X$echo" = Xecho; then + # We didn't find a better echo, so look for alternatives. + if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + # This shell has a builtin print -r that does the trick. + echo='print -r' + elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) && + test "X$CONFIG_SHELL" != X/bin/ksh; then + # If we have ksh, try running configure again with it. + ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} + export ORIGINAL_CONFIG_SHELL + CONFIG_SHELL=/bin/ksh + export CONFIG_SHELL + exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"} + else + # Try using printf. + echo='printf %s\n' + if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + # Cool, printf works + : + elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` && + test "X$echo_testing_string" = 'X\t' && + echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL + export CONFIG_SHELL + SHELL="$CONFIG_SHELL" + export SHELL + echo="$CONFIG_SHELL $0 --fallback-echo" + elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` && + test "X$echo_testing_string" = 'X\t' && + echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + echo="$CONFIG_SHELL $0 --fallback-echo" + else + # maybe with a smaller string... + prev=: + + for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do + if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null + then + break + fi + prev="$cmd" + done + + if test "$prev" != 'sed 50q "$0"'; then + echo_test_string=`eval $prev` + export echo_test_string + exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"} + else + # Oops. We lost completely, so just stick with echo. + echo=echo + fi + fi + fi + fi +fi +fi + +# Copy echo and quote the copy suitably for passing to libtool from +# the Makefile, instead of quoting the original, which is used later. +ECHO=$echo +if test "X$ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then + ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo" +fi + + + + +tagnames=${tagnames+${tagnames},}CXX + +tagnames=${tagnames+${tagnames},}F77 + +# Name of the host. +# hostname on some systems (SVR3.2, Linux) returns a bogus exit status, +# so uname gets run too. +ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` + +exec 6>&1 + +# +# Initializations. +# +ac_default_prefix=/usr/local +ac_config_libobj_dir=. +cross_compiling=no +subdirs= +MFLAGS= +MAKEFLAGS= +SHELL=${CONFIG_SHELL-/bin/sh} + +# Maximum number of lines to put in a shell here document. +# This variable seems obsolete. It should probably be removed, and +# only ac_max_sed_lines should be used. +: ${ac_max_here_lines=38} + +# Identity of this package. +PACKAGE_NAME= +PACKAGE_TARNAME= +PACKAGE_VERSION= +PACKAGE_STRING= +PACKAGE_BUGREPORT= + +ac_unique_file="Makefile.am" +# Factoring default headers for most tests. +ac_includes_default="\ +#include +#if HAVE_SYS_TYPES_H +# include +#endif +#if HAVE_SYS_STAT_H +# include +#endif +#if STDC_HEADERS +# include +# include +#else +# if HAVE_STDLIB_H +# include +# endif +#endif +#if HAVE_STRING_H +# if !STDC_HEADERS && HAVE_MEMORY_H +# include +# endif +# include +#endif +#if HAVE_STRINGS_H +# include +#endif +#if HAVE_INTTYPES_H +# include +#else +# if HAVE_STDINT_H +# include +# endif +#endif #if HAVE_UNISTD_H # include #endif" +ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO SET_MAKE CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT CPP CXX CXXFLAGS ac_ct_CXX build build_cpu build_vendor build_os host host_cpu host_vendor host_os EGREP LN_S ECHO AR ac_ct_AR RANLIB ac_ct_RANLIB STRIP ac_ct_STRIP CXXCPP F77 FFLAGS ac_ct_F77 LIBTOOL LIBTOOL_DEPS CPP_MM INSTALL_TSE3_DOC_TRUE INSTALL_TSE3_DOC_FALSE HAVE_OSS_TRUE HAVE_OSS_FALSE TSE3_WITH_OSS TSE3_WITH_OSS_TRUE TSE3_WITH_OSS_FALSE LIBASOUND HAVE_ALSA_TRUE HAVE_ALSA_FALSE TSE3_WITH_ALSA TSE3_ALSA_VERSION TSE3_ALSA_PREFIX TSE3_WITH_ALSA_0_5_X TSE3_WITH_ALSA_0_9_X TSE3_WITH_ALSA_TRUE TSE3_WITH_ALSA_FALSE TSE3_WITH_ALSA_0_5_X_TRUE TSE3_WITH_ALSA_0_5_X_FALSE TSE3_WITH_ALSA_0_9_X_TRUE TSE3_WITH_ALSA_0_9_X_FALSE LIBARTS HAVE_ARTS_TRUE HAVE_ARTS_FALSE TSE3_WITH_ARTS TSE3_ARTS_PREFIX TSE3_WITH_ARTS_TRUE TSE3_WITH_ARTS_FALSE TSE3_WITH_WIN32 TSE3_WITH_WIN32_TRUE TSE3_WITH_WIN32_FALSE LIBOBJS LTLIBOBJS' +ac_subst_files='' # Initialize some variables set by options. ac_init_help= @@ -812,7 +822,7 @@ # Be sure to have absolute paths. for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \ - localstatedir libdir includedir oldincludedir infodir mandir + localstatedir libdir includedir oldincludedir infodir mandir do eval ac_val=$`echo $ac_var` case $ac_val in @@ -852,10 +862,10 @@ # Try the directory containing this script, then its parent. ac_confdir=`(dirname "$0") 2>/dev/null || $as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$0" : 'X\(//\)[^/]' \| \ - X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || + X"$0" : 'X\(//\)[^/]' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| \ + . : '\(.\)' 2>/dev/null || echo X"$0" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } /^X\(\/\/\)[^/].*/{ s//\1/; q; } @@ -878,6 +888,9 @@ { (exit 1); exit 1; }; } fi fi +(cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null || + { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2 + { (exit 1); exit 1; }; } srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'` ac_env_build_alias_set=${build_alias+set} ac_env_build_alias_value=$build_alias @@ -919,6 +932,18 @@ ac_env_CXXFLAGS_value=$CXXFLAGS ac_cv_env_CXXFLAGS_set=${CXXFLAGS+set} ac_cv_env_CXXFLAGS_value=$CXXFLAGS +ac_env_CXXCPP_set=${CXXCPP+set} +ac_env_CXXCPP_value=$CXXCPP +ac_cv_env_CXXCPP_set=${CXXCPP+set} +ac_cv_env_CXXCPP_value=$CXXCPP +ac_env_F77_set=${F77+set} +ac_env_F77_value=$F77 +ac_cv_env_F77_set=${F77+set} +ac_cv_env_F77_value=$F77 +ac_env_FFLAGS_set=${FFLAGS+set} +ac_env_FFLAGS_value=$FFLAGS +ac_cv_env_FFLAGS_set=${FFLAGS+set} +ac_cv_env_FFLAGS_value=$FFLAGS # # Report the --help message. @@ -952,9 +977,9 @@ cat <<_ACEOF Installation directories: --prefix=PREFIX install architecture-independent files in PREFIX - [$ac_default_prefix] + [$ac_default_prefix] --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX - [PREFIX] + [PREFIX] By default, \`make install' will install all the files in \`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify @@ -998,18 +1023,22 @@ Optional Features: --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) --enable-FEATURE[=ARG] include FEATURE [ARG=yes] - --disable-dependency-tracking Speeds up one-time builds - --enable-dependency-tracking Do not reject slow dependency extractors - --enable-shared=PKGS build shared libraries default=yes - --enable-static=PKGS build static libraries default=no - --enable-fast-install=PKGS optimize for fast installation default=yes + --enable-shared[=PKGS] + build shared libraries [default=yes] + --enable-static[=PKGS] + build static libraries [default=yes] + --enable-fast-install[=PKGS] + optimize for fast installation [default=yes] --disable-libtool-lock avoid locking (might break parallel builds) Optional Packages: --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) - --with-gnu-ld assume the C compiler uses GNU ld default=no - --with-pic try to use only PIC/non-PIC objects default=use both + --with-gnu-ld assume the C compiler uses GNU ld [default=no] + --with-pic try to use only PIC/non-PIC objects [default=use + both] + --with-tags[=TAGS] + include additional configurations [automatic] --with-doc-install whether to install TSE3 library documentation --with-mutex whether to support multithreading in TSE3 --with-oss whether to support the OSS library @@ -1027,6 +1056,9 @@ CPP C preprocessor CXX C++ compiler command CXXFLAGS C++ compiler flags + CXXCPP C++ preprocessor + F77 Fortran 77 compiler command + FFLAGS Fortran 77 compiler flags Use these variables to override the choices made by `configure' or to help it to find libraries and programs with nonstandard names/locations. @@ -1064,12 +1096,45 @@ ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix ac_top_srcdir=$ac_top_builddir$srcdir ;; esac -# Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be -# absolute. -ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd` -ac_abs_top_builddir=`cd "$ac_dir" && cd $ac_top_builddir && pwd` -ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd` -ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd` + +# Do not use `cd foo && pwd` to compute absolute paths, because +# the directories may not exist. +case `pwd` in +.) ac_abs_builddir="$ac_dir";; +*) + case "$ac_dir" in + .) ac_abs_builddir=`pwd`;; + [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; + *) ac_abs_builddir=`pwd`/"$ac_dir";; + esac;; +esac +case $ac_abs_builddir in +.) ac_abs_top_builddir=${ac_top_builddir}.;; +*) + case ${ac_top_builddir}. in + .) ac_abs_top_builddir=$ac_abs_builddir;; + [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; + *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; + esac;; +esac +case $ac_abs_builddir in +.) ac_abs_srcdir=$ac_srcdir;; +*) + case $ac_srcdir in + .) ac_abs_srcdir=$ac_abs_builddir;; + [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; + *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; + esac;; +esac +case $ac_abs_builddir in +.) ac_abs_top_srcdir=$ac_top_srcdir;; +*) + case $ac_top_srcdir in + .) ac_abs_top_srcdir=$ac_abs_builddir;; + [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; + *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; + esac;; +esac cd $ac_dir # Check for guested configure; otherwise get Cygnus style configure. @@ -1080,13 +1145,13 @@ echo $SHELL $ac_srcdir/configure --help=recursive elif test -f $ac_srcdir/configure.ac || - test -f $ac_srcdir/configure.in; then + test -f $ac_srcdir/configure.in; then echo $ac_configure --help else echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 fi - cd $ac_popdir + cd "$ac_popdir" done fi @@ -1094,8 +1159,7 @@ if $ac_init_version; then cat <<\_ACEOF -Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, 2002 -Free Software Foundation, Inc. +Copyright (C) 2003 Free Software Foundation, Inc. This configure script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it. _ACEOF @@ -1107,7 +1171,7 @@ running configure, to aid debugging if configure makes a mistake. It was created by $as_me, which was -generated by GNU Autoconf 2.53. Invocation command line was +generated by GNU Autoconf 2.59. Invocation command line was $ $0 $@ @@ -1159,27 +1223,54 @@ # Keep a trace of the command line. # Strip out --no-create and --no-recursion so they do not pile up. +# Strip out --silent because we don't want to record it for future runs. # Also quote any args containing shell meta-characters. +# Make two passes to allow for proper duplicate-argument suppression. ac_configure_args= +ac_configure_args0= +ac_configure_args1= ac_sep= -for ac_arg +ac_must_keep_next=false +for ac_pass in 1 2 do - case $ac_arg in - -no-create | --no-create | --no-creat | --no-crea | --no-cre \ - | --no-cr | --no-c | -n ) continue ;; - -no-recursion | --no-recursion | --no-recursio | --no-recursi \ - | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) - continue ;; - *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) - ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; - esac - case " $ac_configure_args " in - *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. - *) ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'" - ac_sep=" " ;; - esac - # Get rid of the leading space. + for ac_arg + do + case $ac_arg in + -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + continue ;; + *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) + ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + case $ac_pass in + 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;; + 2) + ac_configure_args1="$ac_configure_args1 '$ac_arg'" + if test $ac_must_keep_next = true; then + ac_must_keep_next=false # Got value, back to normal. + else + case $ac_arg in + *=* | --config-cache | -C | -disable-* | --disable-* \ + | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ + | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ + | -with-* | --with-* | -without-* | --without-* | --x) + case "$ac_configure_args0 " in + "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; + esac + ;; + -* ) ac_must_keep_next=true ;; + esac + fi + ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'" + # Get rid of the leading space. + ac_sep=" " + ;; + esac + done done +$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; } +$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; } # When interrupted or exit'd, cleanup temporary files, and complete # config.log. We remove comments because anyway the quotes in there @@ -1190,6 +1281,7 @@ # Save into config.log some information that might help in debugging. { echo + cat <<\_ASBOX ## ---------------- ## ## Cache variables. ## @@ -1202,16 +1294,45 @@ case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in *ac_space=\ *) sed -n \ - "s/'"'"'/'"'"'\\\\'"'"''"'"'/g; - s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p" + "s/'"'"'/'"'"'\\\\'"'"''"'"'/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p" ;; *) sed -n \ - "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" + "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" ;; esac; } echo + + cat <<\_ASBOX +## ----------------- ## +## Output variables. ## +## ----------------- ## +_ASBOX + echo + for ac_var in $ac_subst_vars + do + eval ac_val=$`echo $ac_var` + echo "$ac_var='"'"'$ac_val'"'"'" + done | sort + echo + + if test -n "$ac_subst_files"; then + cat <<\_ASBOX +## ------------- ## +## Output files. ## +## ------------- ## +_ASBOX + echo + for ac_var in $ac_subst_files + do + eval ac_val=$`echo $ac_var` + echo "$ac_var='"'"'$ac_val'"'"'" + done | sort + echo + fi + if test -s confdefs.h; then cat <<\_ASBOX ## ----------- ## @@ -1219,14 +1340,14 @@ ## ----------- ## _ASBOX echo - sed "/^$/d" confdefs.h + sed "/^$/d" confdefs.h | sort echo fi test "$ac_signal" != 0 && echo "$as_me: caught signal $ac_signal" echo "$as_me: exit $exit_status" } >&5 - rm -f core core.* *.core && + rm -f core *.core && rm -rf conftest* confdefs* conf$$* $ac_clean_files && exit $exit_status ' 0 @@ -1306,7 +1427,7 @@ # value. ac_cache_corrupted=false for ac_var in `(set) 2>&1 | - sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do + sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do eval ac_old_set=\$ac_cv_env_${ac_var}_set eval ac_new_set=\$ac_env_${ac_var}_set eval ac_old_val="\$ac_cv_env_${ac_var}_value" @@ -1323,13 +1444,13 @@ ,);; *) if test "x$ac_old_val" != "x$ac_new_val"; then - { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5 + { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5 echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} - { echo "$as_me:$LINENO: former value: $ac_old_val" >&5 + { echo "$as_me:$LINENO: former value: $ac_old_val" >&5 echo "$as_me: former value: $ac_old_val" >&2;} - { echo "$as_me:$LINENO: current value: $ac_new_val" >&5 + { echo "$as_me:$LINENO: current value: $ac_new_val" >&5 echo "$as_me: current value: $ac_new_val" >&2;} - ac_cache_corrupted=: + ac_cache_corrupted=: fi;; esac # Pass precious variables to config.status. @@ -1377,10 +1498,11 @@ + TSE3_PACKAGE=tse3 TSE3_VERSION=`cat $srcdir/Version` -am__api_version="1.6" +am__api_version="1.4" ac_aux_dir= for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do if test -f $ac_dir/install-sh; then @@ -1417,6 +1539,7 @@ # AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag # AFS /usr/afsws/bin/install, which mishandles nonexistent args # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" +# OS/2's system install, which has a completely different semantic # ./install, which can be erroneously created by make from ./install.sh. echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6 @@ -1433,6 +1556,7 @@ case $as_dir/ in ./ | .// | /cC/* | \ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ + ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \ /usr/ucb/* ) ;; *) # OSF1 and SCO ODT 3.0 have their own names for install. @@ -1440,20 +1564,20 @@ # by default. for ac_prog in ginstall scoinst install; do for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then - if test $ac_prog = install && - grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then - # AIX install. It has an incompatible calling convention. - : - elif test $ac_prog = install && - grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then - # program-specific install script used by HP pwplus--don't use. - : - else - ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" - break 3 - fi - fi + if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then + if test $ac_prog = install && + grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # AIX install. It has an incompatible calling convention. + : + elif test $ac_prog = install && + grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # program-specific install script used by HP pwplus--don't use. + : + else + ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" + break 3 + fi + fi done done ;; @@ -1487,21 +1611,20 @@ echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6 # Just in case sleep 1 -echo timestamp > conftest.file +echo timestamp > conftestfile # Do `set' in a subshell so we don't clobber the current shell's # arguments. Must try -L first in case configure is actually a # symlink; some systems play weird games with the mod time of symlinks # (eg FreeBSD returns the mod time of the symlink's containing # directory). if ( - set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` + set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null` if test "$*" = "X"; then # -L didn't work. - set X `ls -t $srcdir/configure conftest.file` + set X `ls -t $srcdir/configure conftestfile` fi - rm -f conftest.file - if test "$*" != "X $srcdir/configure conftest.file" \ - && test "$*" != "X conftest.file $srcdir/configure"; then + if test "$*" != "X $srcdir/configure conftestfile" \ + && test "$*" != "X conftestfile $srcdir/configure"; then # If neither matched, then we have a broken ls. This can happen # if, for instance, CONFIG_SHELL is bash and it inherits a @@ -1514,7 +1637,7 @@ { (exit 1); exit 1; }; } fi - test "$2" = conftest.file + test "$2" = conftestfile ) then # Ok. @@ -1526,6 +1649,7 @@ Check your system clock" >&2;} { (exit 1); exit 1; }; } fi +rm -f conftest* echo "$as_me:$LINENO: result: yes" >&5 echo "${ECHO_T}yes" >&6 test "$program_prefix" != NONE && @@ -1541,74 +1665,20 @@ program_transform_name=`echo $program_transform_name | sed -f conftest.sed` rm conftest.sed - -# expand $ac_aux_dir to an absolute path -am_aux_dir=`cd $ac_aux_dir && pwd` - -test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" -# Use eval to expand $SHELL -if eval "$MISSING --run true"; then - am_missing_run="$MISSING --run " -else - am_missing_run= - { echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5 -echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;} -fi - -for ac_prog in gawk mawk nawk awk -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_AWK+set}" = set; then +echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 +echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6 +set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,:./+-,___p_,'` +if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 else - if test -n "$AWK"; then - ac_cv_prog_AWK="$AWK" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_AWK="$ac_prog" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -fi -fi -AWK=$ac_cv_prog_AWK -if test -n "$AWK"; then - echo "$as_me:$LINENO: result: $AWK" >&5 -echo "${ECHO_T}$AWK" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - - test -n "$AWK" && break -done - -echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \${MAKE}" >&5 -echo $ECHO_N "checking whether ${MAKE-make} sets \${MAKE}... $ECHO_C" >&6 -set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,./+-,__p_,'` -if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.make <<\_ACEOF -all: - @echo 'ac_maketemp="${MAKE}"' -_ACEOF -# GNU make sometimes prints "make[1]: Entering...", which would confuse us. -eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=` -if test -n "$ac_maketemp"; then - eval ac_cv_prog_make_${ac_make}_set=yes + cat >conftest.make <<\_ACEOF +all: + @echo 'ac_maketemp="$(MAKE)"' +_ACEOF +# GNU make sometimes prints "make[1]: Entering...", which would confuse us. +eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=` +if test -n "$ac_maketemp"; then + eval ac_cv_prog_make_${ac_make}_set=yes else eval ac_cv_prog_make_${ac_make}_set=no fi @@ -1624,19 +1694,17 @@ SET_MAKE="MAKE=${MAKE-make}" fi - # test to see if srcdir already configured -if test "`cd $srcdir && pwd`" != "`pwd`" && - test -f $srcdir/config.status; then + +PACKAGE=$TSE3_PACKAGE + +VERSION=$TSE3_VERSION + +if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5 echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;} { (exit 1); exit 1; }; } fi -# Define the identity of the package. - PACKAGE=$TSE3_PACKAGE - VERSION=$TSE3_VERSION - - cat >>confdefs.h <<_ACEOF #define PACKAGE "$PACKAGE" _ACEOF @@ -1646,125 +1714,89 @@ #define VERSION "$VERSION" _ACEOF -# Some tools Automake needs. - -ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"} - - -AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"} - - -AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"} - - -AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"} - - -MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} - - -AMTAR=${AMTAR-"${am_missing_run}tar"} - -install_sh=${install_sh-"$am_aux_dir/install-sh"} - -# Installed binaries are usually stripped using `strip' when the user -# run `make install-strip'. However `strip' might not be the right -# tool to use in cross-compilation environments, therefore Automake -# will honor the `STRIP' environment variable to overrule this program. -if test "$cross_compiling" != no; then - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. -set dummy ${ac_tool_prefix}strip; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_STRIP+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$STRIP"; then - ac_cv_prog_STRIP="$STRIP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_STRIP="${ac_tool_prefix}strip" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -fi -fi -STRIP=$ac_cv_prog_STRIP -if test -n "$STRIP"; then - echo "$as_me:$LINENO: result: $STRIP" >&5 -echo "${ECHO_T}$STRIP" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - -fi -if test -z "$ac_cv_prog_STRIP"; then - ac_ct_STRIP=$STRIP - # Extract the first word of "strip", so it can be a program name with args. -set dummy strip; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$ac_ct_STRIP"; then - ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_STRIP="strip" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - - test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":" -fi -fi -ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP -if test -n "$ac_ct_STRIP"; then - echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 -echo "${ECHO_T}$ac_ct_STRIP" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - STRIP=$ac_ct_STRIP -else - STRIP="$ac_cv_prog_STRIP" -fi +missing_dir=`cd $ac_aux_dir && pwd` +echo "$as_me:$LINENO: checking for working aclocal-${am__api_version}" >&5 +echo $ECHO_N "checking for working aclocal-${am__api_version}... $ECHO_C" >&6 +# Run test in a subshell; some versions of sh will print an error if +# an executable is not found, even if stderr is redirected. +# Redirect stdin to placate older versions of autoconf. Sigh. +if (aclocal-${am__api_version} --version) < /dev/null > /dev/null 2>&1; then + ACLOCAL=aclocal-${am__api_version} + echo "$as_me:$LINENO: result: found" >&5 +echo "${ECHO_T}found" >&6 +else + ACLOCAL="$missing_dir/missing aclocal-${am__api_version}" + echo "$as_me:$LINENO: result: missing" >&5 +echo "${ECHO_T}missing" >&6 +fi + +echo "$as_me:$LINENO: checking for working autoconf" >&5 +echo $ECHO_N "checking for working autoconf... $ECHO_C" >&6 +# Run test in a subshell; some versions of sh will print an error if +# an executable is not found, even if stderr is redirected. +# Redirect stdin to placate older versions of autoconf. Sigh. +if (autoconf --version) < /dev/null > /dev/null 2>&1; then + AUTOCONF=autoconf + echo "$as_me:$LINENO: result: found" >&5 +echo "${ECHO_T}found" >&6 +else + AUTOCONF="$missing_dir/missing autoconf" + echo "$as_me:$LINENO: result: missing" >&5 +echo "${ECHO_T}missing" >&6 +fi + +echo "$as_me:$LINENO: checking for working automake-${am__api_version}" >&5 +echo $ECHO_N "checking for working automake-${am__api_version}... $ECHO_C" >&6 +# Run test in a subshell; some versions of sh will print an error if +# an executable is not found, even if stderr is redirected. +# Redirect stdin to placate older versions of autoconf. Sigh. +if (automake-${am__api_version} --version) < /dev/null > /dev/null 2>&1; then + AUTOMAKE=automake-${am__api_version} + echo "$as_me:$LINENO: result: found" >&5 +echo "${ECHO_T}found" >&6 +else + AUTOMAKE="$missing_dir/missing automake-${am__api_version}" + echo "$as_me:$LINENO: result: missing" >&5 +echo "${ECHO_T}missing" >&6 +fi + +echo "$as_me:$LINENO: checking for working autoheader" >&5 +echo $ECHO_N "checking for working autoheader... $ECHO_C" >&6 +# Run test in a subshell; some versions of sh will print an error if +# an executable is not found, even if stderr is redirected. +# Redirect stdin to placate older versions of autoconf. Sigh. +if (autoheader --version) < /dev/null > /dev/null 2>&1; then + AUTOHEADER=autoheader + echo "$as_me:$LINENO: result: found" >&5 +echo "${ECHO_T}found" >&6 +else + AUTOHEADER="$missing_dir/missing autoheader" + echo "$as_me:$LINENO: result: missing" >&5 +echo "${ECHO_T}missing" >&6 +fi + +echo "$as_me:$LINENO: checking for working makeinfo" >&5 +echo $ECHO_N "checking for working makeinfo... $ECHO_C" >&6 +# Run test in a subshell; some versions of sh will print an error if +# an executable is not found, even if stderr is redirected. +# Redirect stdin to placate older versions of autoconf. Sigh. +if (makeinfo --version) < /dev/null > /dev/null 2>&1; then + MAKEINFO=makeinfo + echo "$as_me:$LINENO: result: found" >&5 +echo "${ECHO_T}found" >&6 +else + MAKEINFO="$missing_dir/missing makeinfo" + echo "$as_me:$LINENO: result: missing" >&5 +echo "${ECHO_T}missing" >&6 fi -INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s" - -# We need awk for the "check" target. The system "awk" is bad on -# some platforms. -# Add the stamp file to the list of files AC keeps track of, -# along with our hook. -ac_config_headers="$ac_config_headers config.h" - + ac_config_headers="$ac_config_headers config.h" + ac_config_commands="$ac_config_commands default-1" # ---------------------------------------------------------------------------- @@ -1976,9 +2008,7 @@ # However, it has the same basename, so the bogon will be chosen # first if we set CC to just the basename; use the full file name. shift - set dummy "$as_dir/$ac_word" ${1+"$@"} - shift - ac_cv_prog_CC="$@" + ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" fi fi fi @@ -2083,8 +2113,10 @@ fi -test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH" >&5 -echo "$as_me: error: no acceptable C compiler found in \$PATH" >&2;} +test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH +See \`config.log' for more details." >&5 +echo "$as_me: error: no acceptable C compiler found in \$PATH +See \`config.log' for more details." >&2;} { (exit 1); exit 1; }; } # Provide some information about the compiler. @@ -2108,15 +2140,12 @@ (exit $ac_status); } cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif int main () { @@ -2126,12 +2155,12 @@ } _ACEOF ac_clean_files_save=$ac_clean_files -ac_clean_files="$ac_clean_files a.out a.exe" +ac_clean_files="$ac_clean_files a.out a.exe b.out" # Try to create an executable without -o first, disregard a.out. # It will help us diagnose broken compilers, and finding out an intuition # of exeext. -echo "$as_me:$LINENO: checking for C compiler default output" >&5 -echo $ECHO_N "checking for C compiler default output... $ECHO_C" >&6 +echo "$as_me:$LINENO: checking for C compiler default output file name" >&5 +echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6 ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5 (eval $ac_link_default) 2>&5 @@ -2145,26 +2174,39 @@ # Be careful to initialize this variable, since it used to be cached. # Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile. ac_cv_exeext= -for ac_file in `ls a_out.exe a.exe conftest.exe 2>/dev/null; - ls a.out conftest 2>/dev/null; - ls a.* conftest.* 2>/dev/null`; do +# b.out is created by i960 compilers. +for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out +do + test -f "$ac_file" || continue case $ac_file in - *.$ac_ext | *.o | *.obj | *.xcoff | *.tds | *.d | *.pdb | *.xSYM ) ;; - a.out ) # We found the default executable, but exeext='' is most - # certainly right. - break;; - *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` - # FIXME: I believe we export ac_cv_exeext for Libtool --akim. - export ac_cv_exeext - break;; - * ) break;; + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) + ;; + conftest.$ac_ext ) + # This is the source file. + ;; + [ab].out ) + # We found the default executable, but exeext='' is most + # certainly right. + break;; + *.* ) + ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` + # FIXME: I believe we export ac_cv_exeext for Libtool, + # but it would be cool to find out if it's true. Does anybody + # maintain Libtool? --akim. + export ac_cv_exeext + break;; + * ) + break;; esac done else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 -{ { echo "$as_me:$LINENO: error: C compiler cannot create executables" >&5 -echo "$as_me: error: C compiler cannot create executables" >&2;} +sed 's/^/| /' conftest.$ac_ext >&5 + +{ { echo "$as_me:$LINENO: error: C compiler cannot create executables +See \`config.log' for more details." >&5 +echo "$as_me: error: C compiler cannot create executables +See \`config.log' for more details." >&2;} { (exit 77); exit 77; }; } fi @@ -2191,9 +2233,11 @@ cross_compiling=yes else { { echo "$as_me:$LINENO: error: cannot run C compiled programs. -If you meant to cross compile, use \`--host'." >&5 +If you meant to cross compile, use \`--host'. +See \`config.log' for more details." >&5 echo "$as_me: error: cannot run C compiled programs. -If you meant to cross compile, use \`--host'." >&2;} +If you meant to cross compile, use \`--host'. +See \`config.log' for more details." >&2;} { (exit 1); exit 1; }; } fi fi @@ -2201,7 +2245,7 @@ echo "$as_me:$LINENO: result: yes" >&5 echo "${ECHO_T}yes" >&6 -rm -f a.out a.exe conftest$ac_cv_exeext +rm -f a.out a.exe conftest$ac_cv_exeext b.out ac_clean_files=$ac_clean_files_save # Check the compiler produces executables we can run. If not, either # the compiler is broken, or we cross compile. @@ -2221,18 +2265,21 @@ # catch `conftest.exe'. For instance with Cygwin, `ls conftest' will # work properly (i.e., refer to `conftest.exe'), while it won't with # `rm'. -for ac_file in `(ls conftest.exe; ls conftest; ls conftest.*) 2>/dev/null`; do +for ac_file in conftest.exe conftest conftest.*; do + test -f "$ac_file" || continue case $ac_file in - *.$ac_ext | *.o | *.obj | *.xcoff | *.tds | *.d | *.pdb ) ;; + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;; *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` - export ac_cv_exeext - break;; + export ac_cv_exeext + break;; * ) break;; esac done else - { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link" >&5 -echo "$as_me: error: cannot compute suffix of executables: cannot compile and link" >&2;} + { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link +See \`config.log' for more details." >&5 +echo "$as_me: error: cannot compute suffix of executables: cannot compile and link +See \`config.log' for more details." >&2;} { (exit 1); exit 1; }; } fi @@ -2249,15 +2296,12 @@ echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif int main () { @@ -2274,16 +2318,19 @@ (exit $ac_status); }; then for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb ) ;; + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;; *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` break;; esac done else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 -{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile" >&5 -echo "$as_me: error: cannot compute suffix of object files: cannot compile" >&2;} +sed 's/^/| /' conftest.$ac_ext >&5 + +{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile +See \`config.log' for more details." >&5 +echo "$as_me: error: cannot compute suffix of object files: cannot compile +See \`config.log' for more details." >&2;} { (exit 1); exit 1; }; } fi @@ -2299,15 +2346,12 @@ echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif int main () { @@ -2321,11 +2365,20 @@ _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 + (eval $ac_compile) 2>conftest.er1 ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -2334,10 +2387,11 @@ ac_compiler_gnu=yes else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ac_compiler_gnu=no fi -rm -f conftest.$ac_objext conftest.$ac_ext +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ac_cv_c_compiler_gnu=$ac_compiler_gnu fi @@ -2353,15 +2407,12 @@ echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif int main () { @@ -2372,11 +2423,20 @@ _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 + (eval $ac_compile) 2>conftest.er1 ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -2385,10 +2445,11 @@ ac_cv_prog_cc_g=yes else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ac_cv_prog_cc_g=no fi -rm -f conftest.$ac_objext conftest.$ac_ext +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext fi echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 echo "${ECHO_T}$ac_cv_prog_cc_g" >&6 @@ -2407,84 +2468,210 @@ CFLAGS= fi fi -# Some people use a C++ compiler to compile C. Since we use `exit', -# in C++ we need to declare it. In case someone uses the same compiler -# for both compiling C and C++ we need to have the C++ compiler decide -# the declaration of exit, since it's the most demanding environment. +echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5 +echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6 +if test "${ac_cv_prog_cc_stdc+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_cv_prog_cc_stdc=no +ac_save_CC=$CC cat >conftest.$ac_ext <<_ACEOF -#ifndef __cplusplus - choke me -#endif +/* confdefs.h. */ _ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - for ac_declaration in \ - ''\ - '#include ' \ - 'extern "C" void std::exit (int) throw (); using std::exit;' \ - 'extern "C" void std::exit (int); using std::exit;' \ - 'extern "C" void exit (int) throw ();' \ - 'extern "C" void exit (int);' \ - 'void exit (int);' -do - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" -#include -$ac_declaration -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +#include +#include +#include +/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ +struct buf { int x; }; +FILE * (*rcsopen) (struct buf *, struct stat *, int); +static char *e (p, i) + char **p; + int i; +{ + return p[i]; +} +static char *f (char * (*g) (char **, int), char **p, ...) +{ + char *s; + va_list v; + va_start (v,p); + s = g (p, va_arg (v,int)); + va_end (v); + return s; +} + +/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has + function prototypes and stuff, but not '\xHH' hex character constants. + These don't provoke an error unfortunately, instead are silently treated + as 'x'. The following induces an error, until -std1 is added to get + proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an + array size at least. It's necessary to write '\x00'==0 to get something + that's true only with -std1. */ +int osf4_cc_array ['\x00' == 0 ? 1 : -1]; + +int test (int i, double x); +struct s1 {int (*f) (int a);}; +struct s2 {int (*f) (double a);}; +int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); +int argc; +char **argv; int main () { -exit (42); +return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; ; return 0; } _ACEOF -rm -f conftest.$ac_objext +# Don't try gcc -ansi; that turns off useful extensions and +# breaks some systems' header files. +# AIX -qlanglvl=ansi +# Ultrix and OSF/1 -std1 +# HP-UX 10.20 and later -Ae +# HP-UX older versions -Aa -D_HPUX_SOURCE +# SVR4 -Xc -D__EXTENSIONS__ +for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" +do + CC="$ac_save_CC $ac_arg" + rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 + (eval $ac_compile) 2>conftest.er1 ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then - : -else + ac_cv_prog_cc_stdc=$ac_arg +break +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +fi +rm -f conftest.err conftest.$ac_objext +done +rm -f conftest.$ac_ext conftest.$ac_objext +CC=$ac_save_CC + +fi + +case "x$ac_cv_prog_cc_stdc" in + x|xno) + echo "$as_me:$LINENO: result: none needed" >&5 +echo "${ECHO_T}none needed" >&6 ;; + *) + echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5 +echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6 + CC="$CC $ac_cv_prog_cc_stdc" ;; +esac + +# Some people use a C++ compiler to compile C. Since we use `exit', +# in C++ we need to declare it. In case someone uses the same compiler +# for both compiling C and C++ we need to have the C++ compiler decide +# the declaration of exit, since it's the most demanding environment. +cat >conftest.$ac_ext <<_ACEOF +#ifndef __cplusplus + choke me +#endif +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + for ac_declaration in \ + '' \ + 'extern "C" void std::exit (int) throw (); using std::exit;' \ + 'extern "C" void std::exit (int); using std::exit;' \ + 'extern "C" void exit (int) throw ();' \ + 'extern "C" void exit (int);' \ + 'void exit (int);' +do + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_declaration +#include +int +main () +{ +exit (42); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + : +else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + continue fi -rm -f conftest.$ac_objext conftest.$ac_ext +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ $ac_declaration -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif int main () { @@ -2495,11 +2682,20 @@ _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 + (eval $ac_compile) 2>conftest.er1 ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -2508,9 +2704,10 @@ break else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + fi -rm -f conftest.$ac_objext conftest.$ac_ext +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext done rm -f conftest* if test -n "$ac_declaration"; then @@ -2521,156 +2718,15 @@ else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + fi -rm -f conftest.$ac_objext conftest.$ac_ext +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu -rm -f .deps 2>/dev/null -mkdir .deps 2>/dev/null -if test -d .deps; then - DEPDIR=.deps -else - # MS-DOS does not allow filenames that begin with a dot. - DEPDIR=_deps -fi -rmdir .deps 2>/dev/null - - -ac_config_commands="$ac_config_commands depfiles" - - -am_make=${MAKE-make} -cat > confinc << 'END' -doit: - @echo done -END -# If we don't find an include directive, just comment out the code. -echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5 -echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6 -am__include="#" -am__quote= -_am_result=none -# First try GNU make style include. -echo "include confinc" > confmf -# We grep out `Entering directory' and `Leaving directory' -# messages which can occur if `w' ends up in MAKEFLAGS. -# In particular we don't look at `^make:' because GNU make might -# be invoked under some other name (usually "gmake"), in which -# case it prints its new name instead of `make'. -if test "`$am_make -s -f confmf 2> /dev/null | fgrep -v 'ing directory'`" = "done"; then - am__include=include - am__quote= - _am_result=GNU -fi -# Now try BSD make style include. -if test "$am__include" = "#"; then - echo '.include "confinc"' > confmf - if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then - am__include=.include - am__quote="\"" - _am_result=BSD - fi -fi - - -echo "$as_me:$LINENO: result: $_am_result" >&5 -echo "${ECHO_T}$_am_result" >&6 -rm -f confinc confmf - -# Check whether --enable-dependency-tracking or --disable-dependency-tracking was given. -if test "${enable_dependency_tracking+set}" = set; then - enableval="$enable_dependency_tracking" - -fi; -if test "x$enable_dependency_tracking" != xno; then - am_depcomp="$ac_aux_dir/depcomp" - AMDEPBACKSLASH='\' -fi - - -if test "x$enable_dependency_tracking" != xno; then - AMDEP_TRUE= - AMDEP_FALSE='#' -else - AMDEP_TRUE='#' - AMDEP_FALSE= -fi - - - - -depcc="$CC" am_compiler_list= - -echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 -echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6 -if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then - # We make a subdir and do the tests there. Otherwise we can end up - # making bogus files that we don't know about and never remove. For - # instance it was reported that on HP-UX the gcc test will end up - # making a dummy file named `D' -- because `-MD' means `put the output - # in D'. - mkdir conftest.dir - # Copy depcomp to subdir because otherwise we won't find it if we're - # using a relative directory. - cp "$am_depcomp" conftest.dir - cd conftest.dir - - am_cv_CC_dependencies_compiler_type=none - if test "$am_compiler_list" = ""; then - am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` - fi - for depmode in $am_compiler_list; do - # We need to recreate these files for each test, as the compiler may - # overwrite some of them when testing with obscure command lines. - # This happens at least with the AIX C compiler. - echo '#include "conftest.h"' > conftest.c - echo 'int i;' > conftest.h - echo "${am__include} ${am__quote}conftest.Po${am__quote}" > confmf - - case $depmode in - nosideeffect) - # after this tag, mechanisms are not by side-effect, so they'll - # only be used when explicitly requested - if test "x$enable_dependency_tracking" = xyes; then - continue - else - break - fi - ;; - none) break ;; - esac - # We check with `-c' and `-o' for the sake of the "dashmstdout" - # mode. It turns out that the SunPro C++ compiler does not properly - # handle `-M -o', and we need to detect this. - if depmode=$depmode \ - source=conftest.c object=conftest.o \ - depfile=conftest.Po tmpdepfile=conftest.TPo \ - $SHELL ./depcomp $depcc -c conftest.c -o conftest.o >/dev/null 2>&1 && - grep conftest.h conftest.Po > /dev/null 2>&1 && - ${MAKE-make} -s -f confmf > /dev/null 2>&1; then - am_cv_CC_dependencies_compiler_type=$depmode - break - fi - done - - cd .. - rm -rf conftest.dir -else - am_cv_CC_dependencies_compiler_type=none -fi - -fi -echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5 -echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6 -CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type - # AC_REQUIRE([AC_PROG_CPP]) ac_ext=c @@ -2696,24 +2752,34 @@ do # Use a header file that comes with gcc, so configuring glibc # with a fresh cross-compiler works. + # Prefer to if __STDC__ is defined, since + # exists even on freestanding compilers. # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. "Syntax error" is here to catch this case. cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" -#include - Syntax error +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#ifdef __STDC__ +# include +#else +# include +#endif + Syntax error _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? - egrep -v '^ *\+' conftest.er1 >conftest.err + grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag else ac_cpp_err= fi @@ -2724,7 +2790,8 @@ : else echo "$as_me: failed program was:" >&5 - cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + # Broken: fails on valid input. continue fi @@ -2733,20 +2800,24 @@ # OK, works on sane cases. Now check whether non-existent headers # can be detected and how. cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ #include _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? - egrep -v '^ *\+' conftest.er1 >conftest.err + grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag else ac_cpp_err= fi @@ -2758,7 +2829,8 @@ continue else echo "$as_me: failed program was:" >&5 - cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + # Passes both tests. ac_preproc_ok=: break @@ -2787,24 +2859,34 @@ do # Use a header file that comes with gcc, so configuring glibc # with a fresh cross-compiler works. + # Prefer to if __STDC__ is defined, since + # exists even on freestanding compilers. # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. "Syntax error" is here to catch this case. cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" -#include - Syntax error +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#ifdef __STDC__ +# include +#else +# include +#endif + Syntax error _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? - egrep -v '^ *\+' conftest.er1 >conftest.err + grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag else ac_cpp_err= fi @@ -2815,7 +2897,8 @@ : else echo "$as_me: failed program was:" >&5 - cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + # Broken: fails on valid input. continue fi @@ -2824,20 +2907,24 @@ # OK, works on sane cases. Now check whether non-existent headers # can be detected and how. cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ #include _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? - egrep -v '^ *\+' conftest.er1 >conftest.err + grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag else ac_cpp_err= fi @@ -2849,7 +2936,8 @@ continue else echo "$as_me: failed program was:" >&5 - cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + # Passes both tests. ac_preproc_ok=: break @@ -2862,8 +2950,10 @@ if $ac_preproc_ok; then : else - { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check" >&5 -echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check" >&2;} + { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check +See \`config.log' for more details." >&5 +echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check +See \`config.log' for more details." >&2;} { (exit 1); exit 1; }; } fi @@ -2884,6 +2974,7 @@ # AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag # AFS /usr/afsws/bin/install, which mishandles nonexistent args # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" +# OS/2's system install, which has a completely different semantic # ./install, which can be erroneously created by make from ./install.sh. echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6 @@ -2900,6 +2991,7 @@ case $as_dir/ in ./ | .// | /cC/* | \ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ + ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \ /usr/ucb/* ) ;; *) # OSF1 and SCO ODT 3.0 have their own names for install. @@ -2907,20 +2999,20 @@ # by default. for ac_prog in ginstall scoinst install; do for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then - if test $ac_prog = install && - grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then - # AIX install. It has an incompatible calling convention. - : - elif test $ac_prog = install && - grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then - # program-specific install script used by HP pwplus--don't use. - : - else - ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" - break 3 - fi - fi + if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then + if test $ac_prog = install && + grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # AIX install. It has an incompatible calling convention. + : + elif test $ac_prog = install && + grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # program-specific install script used by HP pwplus--don't use. + : + else + ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" + break 3 + fi + fi done done ;; @@ -3070,15 +3162,12 @@ echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif int main () { @@ -3092,11 +3181,20 @@ _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 + (eval $ac_compile) 2>conftest.er1 ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' + { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -3105,10 +3203,11 @@ ac_compiler_gnu=yes else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ac_compiler_gnu=no fi -rm -f conftest.$ac_objext conftest.$ac_ext +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ac_cv_cxx_compiler_gnu=$ac_compiler_gnu fi @@ -3124,15 +3223,12 @@ echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif int main () { @@ -3143,11 +3239,20 @@ _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 + (eval $ac_compile) 2>conftest.er1 ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' + { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -3156,10 +3261,11 @@ ac_cv_prog_cxx_g=yes else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ac_cv_prog_cxx_g=no fi -rm -f conftest.$ac_objext conftest.$ac_ext +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext fi echo "$as_me:$LINENO: result: $ac_cv_prog_cxx_g" >&5 echo "${ECHO_T}$ac_cv_prog_cxx_g" >&6 @@ -3179,8 +3285,7 @@ fi fi for ac_declaration in \ - ''\ - '#include ' \ + '' \ 'extern "C" void std::exit (int) throw (); using std::exit;' \ 'extern "C" void std::exit (int); using std::exit;' \ 'extern "C" void exit (int) throw ();' \ @@ -3188,16 +3293,13 @@ 'void exit (int);' do cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" -#include +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ $ac_declaration -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif +#include int main () { @@ -3208,11 +3310,20 @@ _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 + (eval $ac_compile) 2>conftest.er1 ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' + { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -3221,20 +3332,18 @@ : else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + continue fi -rm -f conftest.$ac_objext conftest.$ac_ext +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ $ac_declaration -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif int main () { @@ -3245,11 +3354,20 @@ _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 + (eval $ac_compile) 2>conftest.er1 ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' + { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -3258,9 +3376,10 @@ break else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + fi -rm -f conftest.$ac_objext conftest.$ac_ext +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext done rm -f conftest* if test -n "$ac_declaration"; then @@ -3275,75 +3394,6 @@ ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu -depcc="$CXX" am_compiler_list= - -echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 -echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6 -if test "${am_cv_CXX_dependencies_compiler_type+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then - # We make a subdir and do the tests there. Otherwise we can end up - # making bogus files that we don't know about and never remove. For - # instance it was reported that on HP-UX the gcc test will end up - # making a dummy file named `D' -- because `-MD' means `put the output - # in D'. - mkdir conftest.dir - # Copy depcomp to subdir because otherwise we won't find it if we're - # using a relative directory. - cp "$am_depcomp" conftest.dir - cd conftest.dir - - am_cv_CXX_dependencies_compiler_type=none - if test "$am_compiler_list" = ""; then - am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` - fi - for depmode in $am_compiler_list; do - # We need to recreate these files for each test, as the compiler may - # overwrite some of them when testing with obscure command lines. - # This happens at least with the AIX C compiler. - echo '#include "conftest.h"' > conftest.c - echo 'int i;' > conftest.h - echo "${am__include} ${am__quote}conftest.Po${am__quote}" > confmf - - case $depmode in - nosideeffect) - # after this tag, mechanisms are not by side-effect, so they'll - # only be used when explicitly requested - if test "x$enable_dependency_tracking" = xyes; then - continue - else - break - fi - ;; - none) break ;; - esac - # We check with `-c' and `-o' for the sake of the "dashmstdout" - # mode. It turns out that the SunPro C++ compiler does not properly - # handle `-M -o', and we need to detect this. - if depmode=$depmode \ - source=conftest.c object=conftest.o \ - depfile=conftest.Po tmpdepfile=conftest.TPo \ - $SHELL ./depcomp $depcc -c conftest.c -o conftest.o >/dev/null 2>&1 && - grep conftest.h conftest.Po > /dev/null 2>&1 && - ${MAKE-make} -s -f confmf > /dev/null 2>&1; then - am_cv_CXX_dependencies_compiler_type=$depmode - break - fi - done - - cd .. - rm -rf conftest.dir -else - am_cv_CXX_dependencies_compiler_type=none -fi - -fi -echo "$as_me:$LINENO: result: $am_cv_CXX_dependencies_compiler_type" >&5 -echo "${ECHO_T}$am_cv_CXX_dependencies_compiler_type" >&6 -CXXDEPMODE=depmode=$am_cv_CXX_dependencies_compiler_type - - # AC_PROG_CXX_WORKS # AC_PROG_CXX_GNU @@ -3404,7 +3454,7 @@ case $host_os in *cygwin* ) CYGWIN=yes;; - * ) CYGWIN=no;; + * ) CYGWIN=no;; esac @@ -3425,79 +3475,146 @@ if test "${enable_shared+set}" = set; then enableval="$enable_shared" p=${PACKAGE-default} -case $enableval in -yes) enable_shared=yes ;; -no) enable_shared=no ;; -*) - enable_shared=no - # Look at the argument we got. We use all the common list separators. - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," - for pkg in $enableval; do - if test "X$pkg" = "X$p"; then - enable_shared=yes - fi - done - IFS="$ac_save_ifs" - ;; -esac + case $enableval in + yes) enable_shared=yes ;; + no) enable_shared=no ;; + *) + enable_shared=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_shared=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac else enable_shared=yes fi; + # Check whether --enable-static or --disable-static was given. if test "${enable_static+set}" = set; then enableval="$enable_static" p=${PACKAGE-default} -case $enableval in -yes) enable_static=yes ;; -no) enable_static=no ;; -*) - enable_static=no - # Look at the argument we got. We use all the common list separators. - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," - for pkg in $enableval; do - if test "X$pkg" = "X$p"; then - enable_static=yes - fi - done - IFS="$ac_save_ifs" - ;; -esac + case $enableval in + yes) enable_static=yes ;; + no) enable_static=no ;; + *) + enable_static=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_static=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac else - enable_static=no + enable_static=yes fi; + # Check whether --enable-fast-install or --disable-fast-install was given. if test "${enable_fast_install+set}" = set; then enableval="$enable_fast_install" p=${PACKAGE-default} -case $enableval in -yes) enable_fast_install=yes ;; -no) enable_fast_install=no ;; -*) - enable_fast_install=no - # Look at the argument we got. We use all the common list separators. - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," - for pkg in $enableval; do - if test "X$pkg" = "X$p"; then - enable_fast_install=yes - fi - done - IFS="$ac_save_ifs" - ;; -esac + case $enableval in + yes) enable_fast_install=yes ;; + no) enable_fast_install=no ;; + *) + enable_fast_install=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_fast_install=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac else enable_fast_install=yes fi; -# Find the correct PATH separator. Usually this is `:', but -# DJGPP uses `;' like DOS. -if test "X${PATH_SEPARATOR+set}" != Xset; then - UNAME=${UNAME-`uname 2>/dev/null`} - case X$UNAME in - *-DOS) lt_cv_sys_path_separator=';' ;; - *) lt_cv_sys_path_separator=':' ;; - esac - PATH_SEPARATOR=$lt_cv_sys_path_separator + +echo "$as_me:$LINENO: checking for a sed that does not truncate output" >&5 +echo $ECHO_N "checking for a sed that does not truncate output... $ECHO_C" >&6 +if test "${lt_cv_path_SED+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + # Loop through the user's path and test for sed and gsed. +# Then use that list of sed's as ones to test for truncation. +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for lt_ac_prog in sed gsed; do + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then + lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext" + fi + done + done +done +lt_ac_max=0 +lt_ac_count=0 +# Add /usr/xpg4/bin/sed as it is typically found on Solaris +# along with /bin/sed that truncates output. +for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do + test ! -f $lt_ac_sed && break + cat /dev/null > conftest.in + lt_ac_count=0 + echo $ECHO_N "0123456789$ECHO_C" >conftest.in + # Check for GNU sed and select it if it is found. + if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then + lt_cv_path_SED=$lt_ac_sed + break + fi + while true; do + cat conftest.in conftest.in >conftest.tmp + mv conftest.tmp conftest.in + cp conftest.in conftest.nl + echo >>conftest.nl + $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break + cmp -s conftest.out conftest.nl || break + # 10000 chars as input seems more than enough + test $lt_ac_count -gt 10 && break + lt_ac_count=`expr $lt_ac_count + 1` + if test $lt_ac_count -gt $lt_ac_max; then + lt_ac_max=$lt_ac_count + lt_cv_path_SED=$lt_ac_sed + fi + done +done +SED=$lt_cv_path_SED + fi +echo "$as_me:$LINENO: result: $SED" >&5 +echo "${ECHO_T}$SED" >&6 + +echo "$as_me:$LINENO: checking for egrep" >&5 +echo $ECHO_N "checking for egrep... $ECHO_C" >&6 +if test "${ac_cv_prog_egrep+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if echo a | (grep -E '(a|b)') >/dev/null 2>&1 + then ac_cv_prog_egrep='grep -E' + else ac_cv_prog_egrep='egrep' + fi +fi +echo "$as_me:$LINENO: result: $ac_cv_prog_egrep" >&5 +echo "${ECHO_T}$ac_cv_prog_egrep" >&6 + EGREP=$ac_cv_prog_egrep + + # Check whether --with-gnu-ld or --without-gnu-ld was given. if test "${with_gnu_ld+set}" = set; then @@ -3509,8 +3626,8 @@ ac_prog=ld if test "$GCC" = yes; then # Check if gcc -print-prog-name=ld gives a path. - echo "$as_me:$LINENO: checking for ld used by GCC" >&5 -echo $ECHO_N "checking for ld used by GCC... $ECHO_C" >&6 + echo "$as_me:$LINENO: checking for ld used by $CC" >&5 +echo $ECHO_N "checking for ld used by $CC... $ECHO_C" >&6 case $host in *-*-mingw*) # gcc leaves a trailing carriage return which upsets mingw @@ -3520,12 +3637,12 @@ esac case $ac_prog in # Accept absolute paths. - [\\/]* | [A-Za-z]:[\\/]*) + [\\/]* | ?:[\\/]*) re_direlt='/[^/][^/]*/\.\./' - # Canonicalize the path of ld - ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'` + # Canonicalize the pathname of ld + ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'` while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do - ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"` + ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"` done test -z "$LD" && LD="$ac_prog" ;; @@ -3549,22 +3666,26 @@ echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -z "$LD"; then - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR for ac_dir in $PATH; do + IFS="$lt_save_ifs" test -z "$ac_dir" && ac_dir=. if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then lt_cv_path_LD="$ac_dir/$ac_prog" # Check to see if the program is GNU ld. I'd rather use --version, # but apparently some GNU ld's only accept -v. # Break only if it was the GNU/non-GNU ld that we prefer. - if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then + case `"$lt_cv_path_LD" -v 2>&1 &6 else # I'd rather use --version here, but apparently some GNU ld's only accept -v. -if $LD -v 2>&1 &5; then +case `$LD -v 2>&1 &5 echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6 @@ -3608,7 +3732,11 @@ echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5 echo "${ECHO_T}$lt_cv_ld_reload_flag" >&6 reload_flag=$lt_cv_ld_reload_flag -test -n "$reload_flag" && reload_flag=" $reload_flag" +case $reload_flag in +"" | " "*) ;; +*) reload_flag=" $reload_flag" ;; +esac +reload_cmds='$LD$reload_flag -o $output$reload_objs' echo "$as_me:$LINENO: checking for BSD-compatible nm" >&5 echo $ECHO_N "checking for BSD-compatible nm... $ECHO_C" >&6 @@ -3619,35 +3747,42 @@ # Let the user override the test. lt_cv_path_NM="$NM" else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do + IFS="$lt_save_ifs" test -z "$ac_dir" && ac_dir=. - tmp_nm=$ac_dir/${ac_tool_prefix}nm - if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then + tmp_nm="$ac_dir/${ac_tool_prefix}nm" + if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then # Check to see if the nm accepts a BSD-compat flag. # Adding the `sed 1q' prevents false positives on HP-UX, which says: # nm: unknown option "B" ignored # Tru64's nm complains that /dev/null is an invalid object file - if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then + case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in + */dev/null* | *'Invalid file or object type'*) lt_cv_path_NM="$tmp_nm -B" break - elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then - lt_cv_path_NM="$tmp_nm -p" - break - else - lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but - continue # so that we can try to find one that supports BSD flags - fi + ;; + *) + case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in + */dev/null*) + lt_cv_path_NM="$tmp_nm -p" + break + ;; + *) + lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but + continue # so that we can try to find one that supports BSD flags + ;; + esac + esac fi done - IFS="$ac_save_ifs" + IFS="$lt_save_ifs" test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm fi fi - +echo "$as_me:$LINENO: result: $lt_cv_path_NM" >&5 +echo "${ECHO_T}$lt_cv_path_NM" >&6 NM="$lt_cv_path_NM" -echo "$as_me:$LINENO: result: $NM" >&5 -echo "${ECHO_T}$NM" >&6 echo "$as_me:$LINENO: checking whether ln -s works" >&5 echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6 @@ -3660,8 +3795,8 @@ echo "${ECHO_T}no, using $LN_S" >&6 fi -echo "$as_me:$LINENO: checking how to recognise dependant libraries" >&5 -echo $ECHO_N "checking how to recognise dependant libraries... $ECHO_C" >&6 +echo "$as_me:$LINENO: checking how to recognise dependent libraries" >&5 +echo $ECHO_N "checking how to recognise dependent libraries... $ECHO_C" >&6 if test "${lt_cv_deplibs_check_method+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -3675,7 +3810,7 @@ # 'pass_all' -- all dependencies passed with no checks. # 'test_compile' -- check by making test program. # 'file_magic [[regex]]' -- check by looking for files in library path -# which responds to the $file_magic_cmd with a given egrep regex. +# which responds to the $file_magic_cmd with a given extended regex. # If you have `file' or equivalent on your system and you're not sure # whether `pass_all' will *always* work, you probably want this one. @@ -3694,25 +3829,24 @@ lt_cv_file_magic_test_file=/shlib/libc.so ;; -cygwin* | mingw* | pw32*) +cygwin*) + # func_win32_libid is a shell function defined in ltmain.sh + lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' + lt_cv_file_magic_cmd='func_win32_libid' + ;; + +mingw* | pw32*) + # Base MSYS/MinGW do not provide the 'file' command needed by + # func_win32_libid shell function, so use a weaker test based on 'objdump'. lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' lt_cv_file_magic_cmd='$OBJDUMP -f' ;; darwin* | rhapsody*) - lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library' - lt_cv_file_magic_cmd='/usr/bin/file -L' - case "$host_os" in - rhapsody* | darwin1.[012]) - lt_cv_file_magic_test_file=`echo /System/Library/Frameworks/System.framework/Versions/*/System | head -1` - ;; - *) # Darwin 1.3 on - lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib' - ;; - esac + lt_cv_deplibs_check_method=pass_all ;; -freebsd*) +freebsd* | kfreebsd*-gnu) if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then case $host_cpu in i*86 ) @@ -3732,50 +3866,44 @@ lt_cv_deplibs_check_method=pass_all ;; -hpux10.20*|hpux11*) - lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library' +hpux10.20* | hpux11*) lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=/usr/lib/libc.sl - ;; - -irix5* | irix6*) - case $host_os in - irix5*) - # this will be overridden with pass_all, but let us keep it just in case - lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1" + case "$host_cpu" in + ia64*) + lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64' + lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so + ;; + hppa*64*) + lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]' + lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl ;; *) - case $LD in - *-32|*"-32 ") libmagic=32-bit;; - *-n32|*"-n32 ") libmagic=N32;; - *-64|*"-64 ") libmagic=64-bit;; - *) libmagic=never-match;; - esac - # this will be overridden with pass_all, but let us keep it just in case - lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1" + lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library' + lt_cv_file_magic_test_file=/usr/lib/libc.sl ;; esac - lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*` + ;; + +irix5* | irix6* | nonstopux*) + case $LD in + *-32|*"-32 ") libmagic=32-bit;; + *-n32|*"-n32 ") libmagic=N32;; + *-64|*"-64 ") libmagic=64-bit;; + *) libmagic=never-match;; + esac lt_cv_deplibs_check_method=pass_all ;; # This must be Linux ELF. -linux-gnu*) - case $host_cpu in - alpha* | hppa* | i*86 | powerpc* | sparc* | ia64* | s390* ) - lt_cv_deplibs_check_method=pass_all ;; - *) - # glibc up to 2.1.1 does not perform some relocations on ARM - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;; - esac - lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so` +linux*) + lt_cv_deplibs_check_method=pass_all ;; -netbsd*) +netbsd* | knetbsd*-gnu) if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then - lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$' + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' else - lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so$' + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$' fi ;; @@ -3785,6 +3913,10 @@ lt_cv_file_magic_test_file=/usr/lib/libnls.so ;; +nto-qnx*) + lt_cv_deplibs_check_method=unknown + ;; + openbsd*) lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` @@ -3796,9 +3928,6 @@ ;; osf3* | osf4* | osf5*) - # this will be overridden with pass_all, but let us keep it just in case - lt_cv_deplibs_check_method='file_magic COFF format alpha shared library' - lt_cv_file_magic_test_file=/shlib/libc.so lt_cv_deplibs_check_method=pass_all ;; @@ -3808,11 +3937,6 @@ solaris*) lt_cv_deplibs_check_method=pass_all - lt_cv_file_magic_test_file=/lib/libc.so - ;; - -sysv5uw[78]* | sysv4*uw2*) - lt_cv_deplibs_check_method=pass_all ;; sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) @@ -3833,8 +3957,15 @@ lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib" lt_cv_file_magic_test_file=/lib/libc.so ;; + siemens) + lt_cv_deplibs_check_method=pass_all + ;; esac ;; + +sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[78]* | unixware7* | sysv4*uw2*) + lt_cv_deplibs_check_method=pass_all + ;; esac fi @@ -3842,208 +3973,209 @@ echo "${ECHO_T}$lt_cv_deplibs_check_method" >&6 file_magic_cmd=$lt_cv_file_magic_cmd deplibs_check_method=$lt_cv_deplibs_check_method +test -z "$deplibs_check_method" && deplibs_check_method=unknown +# If no C compiler was specified, use CC. +LTCC=${LTCC-"$CC"} +# Allow CC to be a program name with arguments. +compiler=$CC +# Check whether --enable-libtool-lock or --disable-libtool-lock was given. +if test "${enable_libtool_lock+set}" = set; then + enableval="$enable_libtool_lock" -# Check for command to grab the raw symbol name followed by C symbol from nm. -echo "$as_me:$LINENO: checking command to parse $NM output" >&5 -echo $ECHO_N "checking command to parse $NM output... $ECHO_C" >&6 -if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - -# These are sane defaults that work on at least a few old systems. -# [They come from Ultrix. What could be older than Ultrix?!! ;)] - -# Character class describing NM global symbol codes. -symcode='[BCDEGRST]' - -# Regexp to match symbols that can be accessed directly from C. -sympat='\([_A-Za-z][_A-Za-z0-9]*\)' - -# Transform the above into a raw symbol and a C symbol. -symxfrm='\1 \2\3 \3' - -# Transform an extracted symbol line into a proper C declaration -lt_cv_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'" - -# Transform an extracted symbol line into symbol name and symbol address -lt_cv_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" +fi; +test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes -# Define system-specific variables. -case $host_os in -aix*) - symcode='[BCDT]' - ;; -cygwin* | mingw* | pw32*) - symcode='[ABCDGISTW]' - ;; -hpux*) # Its linker distinguishes data from code symbols - lt_cv_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" - lt_cv_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" - ;; -irix*) - symcode='[BCDEGRST]' - ;; -solaris* | sysv5*) - symcode='[BDT]' +# Some flags need to be propagated to the compiler or linker for good +# libtool support. +case $host in +ia64-*-hpux*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + case `/usr/bin/file conftest.$ac_objext` in + *ELF-32*) + HPUX_IA64_MODE="32" + ;; + *ELF-64*) + HPUX_IA64_MODE="64" + ;; + esac + fi + rm -rf conftest* ;; -sysv4) - symcode='[DFNSTU]' +*-*-irix6*) + # Find out which ABI we are using. + echo '#line 4019 "configure"' > conftest.$ac_ext + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + if test "$lt_cv_prog_gnu_ld" = yes; then + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + LD="${LD-ld} -melf32bsmip" + ;; + *N32*) + LD="${LD-ld} -melf32bmipn32" + ;; + *64-bit*) + LD="${LD-ld} -melf64bmip" + ;; + esac + else + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + LD="${LD-ld} -32" + ;; + *N32*) + LD="${LD-ld} -n32" + ;; + *64-bit*) + LD="${LD-ld} -64" + ;; + esac + fi + fi + rm -rf conftest* ;; -esac -# Handle CRLF in mingw tool chain -opt_cr= -case $host_os in -mingw*) - opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp +x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + case "`/usr/bin/file conftest.o`" in + *32-bit*) + case $host in + x86_64-*linux*) + LD="${LD-ld} -m elf_i386" + ;; + ppc64-*linux*|powerpc64-*linux*) + LD="${LD-ld} -m elf32ppclinux" + ;; + s390x-*linux*) + LD="${LD-ld} -m elf_s390" + ;; + sparc64-*linux*) + LD="${LD-ld} -m elf32_sparc" + ;; + esac + ;; + *64-bit*) + case $host in + x86_64-*linux*) + LD="${LD-ld} -m elf_x86_64" + ;; + ppc*-*linux*|powerpc*-*linux*) + LD="${LD-ld} -m elf64ppc" + ;; + s390*-*linux*) + LD="${LD-ld} -m elf64_s390" + ;; + sparc*-*linux*) + LD="${LD-ld} -m elf64_sparc" + ;; + esac + ;; + esac + fi + rm -rf conftest* ;; -esac -# If we're using GNU nm, then use its standard symbol codes. -if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then - symcode='[ABCDGISTW]' -fi +*-*-sco3.2v5*) + # On SCO OpenServer 5, we need -belf to get full-featured binaries. + SAVE_CFLAGS="$CFLAGS" + CFLAGS="$CFLAGS -belf" + echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5 +echo $ECHO_N "checking whether the C compiler needs -belf... $ECHO_C" >&6 +if test "${lt_cv_cc_needs_belf+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu -# Try without a prefix undercore, then with it. -for ac_symprfx in "" "_"; do + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ - # Write the raw and C identifiers. -lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'" +int +main () +{ - # Check to see that the pipe works correctly. - pipe_works=no - rm -f conftest* - cat > conftest.$ac_ext <&5 - (eval $ac_compile) 2>&5 +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - # Now try to grab the symbols. - nlist=conftest.nm - if { (eval echo "$as_me:$LINENO: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\"") >&5 - (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && test -s "$nlist"; then - # Try sorting and uniquifying the output. - if sort "$nlist" | uniq > "$nlist"T; then - mv -f "$nlist"T "$nlist" - else - rm -f "$nlist"T - fi - - # Make sure that we snagged all the symbols we need. - if egrep ' nm_test_var$' "$nlist" >/dev/null; then - if egrep ' nm_test_func$' "$nlist" >/dev/null; then - cat < conftest.$ac_ext -#ifdef __cplusplus -extern "C" { -#endif - -EOF - # Now generate the symbol file. - eval "$lt_cv_global_symbol_to_cdecl"' < "$nlist" >> conftest.$ac_ext' - - cat <> conftest.$ac_ext -#if defined (__STDC__) && __STDC__ -# define lt_ptr void * -#else -# define lt_ptr char * -# define const -#endif - -/* The mapping between symbol names and symbols. */ -const struct { - const char *name; - lt_ptr address; -} -lt_preloaded_symbols[] = -{ -EOF - sed "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr) \&\2},/" < "$nlist" >> conftest.$ac_ext - cat <<\EOF >> conftest.$ac_ext - {0, (lt_ptr) 0} -}; - -#ifdef __cplusplus -} -#endif -EOF - # Now try linking the two files. - mv conftest.$ac_objext conftstm.$ac_objext - save_LIBS="$LIBS" - save_CFLAGS="$CFLAGS" - LIBS="conftstm.$ac_objext" - CFLAGS="$CFLAGS$no_builtin_flag" - if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && test -s conftest; then - pipe_works=yes - fi - LIBS="$save_LIBS" - CFLAGS="$save_CFLAGS" - else - echo "cannot find nm_test_func in $nlist" >&5 - fi - else - echo "cannot find nm_test_var in $nlist" >&5 - fi - else - echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5 - fi - else - echo "$progname: failed program was:" >&5 - cat conftest.$ac_ext >&5 - fi - rm -f conftest* conftst* - - # Do not use the global_symbol_pipe unless it works. - if test "$pipe_works" = yes; then - break - else - lt_cv_sys_global_symbol_pipe= - fi -done + (exit $ac_status); }; }; then + lt_cv_cc_needs_belf=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 +lt_cv_cc_needs_belf=no fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu -global_symbol_pipe="$lt_cv_sys_global_symbol_pipe" -if test -z "$lt_cv_sys_global_symbol_pipe"; then - global_symbol_to_cdecl= - global_symbol_to_c_name_address= -else - global_symbol_to_cdecl="$lt_cv_global_symbol_to_cdecl" - global_symbol_to_c_name_address="$lt_cv_global_symbol_to_c_name_address" -fi -if test -z "$global_symbol_pipe$global_symbol_to_cdec$global_symbol_to_c_name_address"; -then - echo "$as_me:$LINENO: result: failed" >&5 -echo "${ECHO_T}failed" >&6 -else - echo "$as_me:$LINENO: result: ok" >&5 -echo "${ECHO_T}ok" >&6 fi +echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5 +echo "${ECHO_T}$lt_cv_cc_needs_belf" >&6 + if test x"$lt_cv_cc_needs_belf" != x"yes"; then + # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf + CFLAGS="$SAVE_CFLAGS" + fi + ;; + +esac + +need_locks="$enable_libtool_lock" + echo "$as_me:$LINENO: checking for ANSI C header files" >&5 @@ -4052,49 +4184,67 @@ echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ #include #include #include #include +int +main () +{ + + ; + return 0; +} _ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 ac_status=$? - egrep -v '^ *\+' conftest.er1 >conftest.err + grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_c_preproc_warn_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then ac_cv_header_stdc=yes else echo "$as_me: failed program was:" >&5 - cat conftest.$ac_ext >&5 - ac_cv_header_stdc=no +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_header_stdc=no fi -rm -f conftest.err conftest.$ac_ext +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - egrep "memchr" >/dev/null 2>&1; then + $EGREP "memchr" >/dev/null 2>&1; then : else ac_cv_header_stdc=no @@ -4106,13 +4256,16 @@ if test $ac_cv_header_stdc = yes; then # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - egrep "free" >/dev/null 2>&1; then + $EGREP "free" >/dev/null 2>&1; then : else ac_cv_header_stdc=no @@ -4127,16 +4280,20 @@ : else cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ #include #if ((' ' & 0x0FF) == 0x020) # define ISLOWER(c) ('a' <= (c) && (c) <= 'z') # define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) #else -# define ISLOWER(c) (('a' <= (c) && (c) <= 'i') \ - || ('j' <= (c) && (c) <= 'r') \ - || ('s' <= (c) && (c) <= 'z')) +# define ISLOWER(c) \ + (('a' <= (c) && (c) <= 'i') \ + || ('j' <= (c) && (c) <= 'r') \ + || ('s' <= (c) && (c) <= 'z')) # define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) #endif @@ -4147,7 +4304,7 @@ int i; for (i = 0; i < 256; i++) if (XOR (islower (i), ISLOWER (i)) - || toupper (i) != TOUPPER (i)) + || toupper (i) != TOUPPER (i)) exit(2); exit (0); } @@ -4167,11 +4324,12 @@ else echo "$as_me: program exited with status $ac_status" >&5 echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ( exit $ac_status ) ac_cv_header_stdc=no fi -rm -f core core.* *.core conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext fi fi fi @@ -4196,7 +4354,7 @@ for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ - inttypes.h stdint.h unistd.h + inttypes.h stdint.h unistd.h do as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` echo "$as_me:$LINENO: checking for $ac_header" >&5 @@ -4205,19 +4363,31 @@ echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ $ac_includes_default #include <$ac_header> _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 + (eval $ac_compile) 2>conftest.er1 ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -4226,10 +4396,11 @@ eval "$as_ac_Header=yes" else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + eval "$as_ac_Header=no" fi -rm -f conftest.$ac_objext conftest.$ac_ext +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext fi echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 @@ -4260,18 +4431,30 @@ echo "$as_me:$LINENO: checking $ac_header usability" >&5 echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ $ac_includes_default #include <$ac_header> _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 + (eval $ac_compile) 2>conftest.er1 ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -4280,10 +4463,11 @@ ac_header_compiler=yes else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ac_header_compiler=no fi -rm -f conftest.$ac_objext conftest.$ac_ext +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 echo "${ECHO_T}$ac_header_compiler" >&6 @@ -4291,20 +4475,24 @@ echo "$as_me:$LINENO: checking $ac_header presence" >&5 echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ #include <$ac_header> _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? - egrep -v '^ *\+' conftest.er1 >conftest.err + grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag else ac_cpp_err= fi @@ -4315,7 +4503,8 @@ ac_header_preproc=yes else echo "$as_me: failed program was:" >&5 - cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ac_header_preproc=no fi rm -f conftest.err conftest.$ac_ext @@ -4323,26 +4512,43 @@ echo "${ECHO_T}$ac_header_preproc" >&6 # So? What about this header? -case $ac_header_compiler:$ac_header_preproc in - yes:no ) +case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in + yes:no: ) { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};; - no:yes ) + { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 +echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} + ac_header_preproc=yes + ;; + no:yes:* ) { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 -echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 +echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 +echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 +echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};; +echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 +echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} + ( + cat <<\_ASBOX +## ------------------------------------------ ## +## Report this to the AC_PACKAGE_NAME lists. ## +## ------------------------------------------ ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; esac echo "$as_me:$LINENO: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 if eval "test \"\${$as_ac_Header+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 else - eval "$as_ac_Header=$ac_header_preproc" + eval "$as_ac_Header=\$ac_header_preproc" fi echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 @@ -4357,239 +4563,253 @@ done - - - - -# Only perform the check for file, if the check method requires it -case $deplibs_check_method in -file_magic*) - if test "$file_magic_cmd" = '$MAGIC_CMD'; then - echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5 -echo $ECHO_N "checking for ${ac_tool_prefix}file... $ECHO_C" >&6 -if test "${lt_cv_path_MAGIC_CMD+set}" = set; then +ac_ext=cc +ac_cpp='$CXXCPP $CPPFLAGS' +ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_cxx_compiler_gnu +echo "$as_me:$LINENO: checking how to run the C++ preprocessor" >&5 +echo $ECHO_N "checking how to run the C++ preprocessor... $ECHO_C" >&6 +if test -z "$CXXCPP"; then + if test "${ac_cv_prog_CXXCPP+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else - case $MAGIC_CMD in - /*) - lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. - ;; - ?:/*) - lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path. - ;; - *) - ac_save_MAGIC_CMD="$MAGIC_CMD" - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - ac_dummy="/usr/bin:$PATH" - for ac_dir in $ac_dummy; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/${ac_tool_prefix}file; then - lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file" - if test -n "$file_magic_test_file"; then - case $deplibs_check_method in - "file_magic "*) - file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`" - MAGIC_CMD="$lt_cv_path_MAGIC_CMD" - if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | - egrep "$file_magic_regex" > /dev/null; then - : - else - cat <&2 - -*** Warning: the command libtool uses to detect shared libraries, -*** $file_magic_cmd, produces output that libtool cannot recognize. -*** The result is that libtool may fail to recognize shared libraries -*** as such. This will affect the creation of libtool libraries that -*** depend on shared libraries, but programs linked with such libtool -*** libraries will work regardless of this problem. Nevertheless, you -*** may want to report the problem to your system manager and/or to -*** bug-libtool@gnu.org - -EOF - fi ;; - esac - fi - break - fi - done - IFS="$ac_save_ifs" - MAGIC_CMD="$ac_save_MAGIC_CMD" - ;; -esac + # Double quotes because CXXCPP needs to be expanded + for CXXCPP in "$CXX -E" "/lib/cpp" + do + ac_preproc_ok=false +for ac_cxx_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer to if __STDC__ is defined, since + # exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#ifdef __STDC__ +# include +#else +# include +#endif + Syntax error +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_cxx_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes fi - -MAGIC_CMD="$lt_cv_path_MAGIC_CMD" -if test -n "$MAGIC_CMD"; then - echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 -echo "${ECHO_T}$MAGIC_CMD" >&6 +if test -z "$ac_cpp_err"; then + : else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + # Broken: fails on valid input. +continue fi +rm -f conftest.err conftest.$ac_ext -if test -z "$lt_cv_path_MAGIC_CMD"; then - if test -n "$ac_tool_prefix"; then - echo "$as_me:$LINENO: checking for file" >&5 -echo $ECHO_N "checking for file... $ECHO_C" >&6 -if test "${lt_cv_path_MAGIC_CMD+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 + # OK, works on sane cases. Now check whether non-existent headers + # can be detected and how. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_cxx_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag + else + ac_cpp_err= + fi else - case $MAGIC_CMD in - /*) - lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. - ;; - ?:/*) - lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path. - ;; - *) - ac_save_MAGIC_CMD="$MAGIC_CMD" - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - ac_dummy="/usr/bin:$PATH" - for ac_dir in $ac_dummy; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/file; then - lt_cv_path_MAGIC_CMD="$ac_dir/file" - if test -n "$file_magic_test_file"; then - case $deplibs_check_method in - "file_magic "*) - file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`" - MAGIC_CMD="$lt_cv_path_MAGIC_CMD" - if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | - egrep "$file_magic_regex" > /dev/null; then - : - else - cat <&2 - -*** Warning: the command libtool uses to detect shared libraries, -*** $file_magic_cmd, produces output that libtool cannot recognize. -*** The result is that libtool may fail to recognize shared libraries -*** as such. This will affect the creation of libtool libraries that -*** depend on shared libraries, but programs linked with such libtool -*** libraries will work regardless of this problem. Nevertheless, you -*** may want to report the problem to your system manager and/or to -*** bug-libtool@gnu.org - -EOF - fi ;; - esac - fi - break - fi - done - IFS="$ac_save_ifs" - MAGIC_CMD="$ac_save_MAGIC_CMD" - ;; -esac + ac_cpp_err=yes fi - -MAGIC_CMD="$lt_cv_path_MAGIC_CMD" -if test -n "$MAGIC_CMD"; then - echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 -echo "${ECHO_T}$MAGIC_CMD" >&6 +if test -z "$ac_cpp_err"; then + # Broken: success on invalid input. +continue else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + # Passes both tests. +ac_preproc_ok=: +break fi +rm -f conftest.err conftest.$ac_ext - else - MAGIC_CMD=: - fi +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.err conftest.$ac_ext +if $ac_preproc_ok; then + break fi - fi - ;; -esac + done + ac_cv_prog_CXXCPP=$CXXCPP -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. -set dummy ${ac_tool_prefix}ranlib; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_RANLIB+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$RANLIB"; then - ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. +fi + CXXCPP=$ac_cv_prog_CXXCPP else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH + ac_cv_prog_CXXCPP=$CXXCPP +fi +echo "$as_me:$LINENO: result: $CXXCPP" >&5 +echo "${ECHO_T}$CXXCPP" >&6 +ac_preproc_ok=false +for ac_cxx_preproc_warn_flag in '' yes do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer to if __STDC__ is defined, since + # exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#ifdef __STDC__ +# include +#else +# include +#endif + Syntax error +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_cxx_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag + else + ac_cpp_err= fi -done -done - -fi -fi -RANLIB=$ac_cv_prog_RANLIB -if test -n "$RANLIB"; then - echo "$as_me:$LINENO: result: $RANLIB" >&5 -echo "${ECHO_T}$RANLIB" >&6 else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - + ac_cpp_err=yes fi -if test -z "$ac_cv_prog_RANLIB"; then - ac_ct_RANLIB=$RANLIB - # Extract the first word of "ranlib", so it can be a program name with args. -set dummy ranlib; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$ac_ct_RANLIB"; then - ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. +if test -z "$ac_cpp_err"; then + : else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_RANLIB="ranlib" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 - test -z "$ac_cv_prog_ac_ct_RANLIB" && ac_cv_prog_ac_ct_RANLIB=":" + # Broken: fails on valid input. +continue fi +rm -f conftest.err conftest.$ac_ext + + # OK, works on sane cases. Now check whether non-existent headers + # can be detected and how. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_cxx_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes fi -ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB -if test -n "$ac_ct_RANLIB"; then - echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 -echo "${ECHO_T}$ac_ct_RANLIB" >&6 +if test -z "$ac_cpp_err"; then + # Broken: success on invalid input. +continue else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + # Passes both tests. +ac_preproc_ok=: +break fi +rm -f conftest.err conftest.$ac_ext - RANLIB=$ac_ct_RANLIB +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.err conftest.$ac_ext +if $ac_preproc_ok; then + : else - RANLIB="$ac_cv_prog_RANLIB" + { { echo "$as_me:$LINENO: error: C++ preprocessor \"$CXXCPP\" fails sanity check +See \`config.log' for more details." >&5 +echo "$as_me: error: C++ preprocessor \"$CXXCPP\" fails sanity check +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } fi +ac_ext=cc +ac_cpp='$CXXCPP $CPPFLAGS' +ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_cxx_compiler_gnu + + +ac_ext=f +ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5' +ac_link='$F77 -o conftest$ac_exeext $FFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_f77_compiler_gnu if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. -set dummy ${ac_tool_prefix}strip; ac_word=$2 + for ac_prog in g77 f77 xlf frt pgf77 fort77 fl32 af77 f90 xlf90 pgf90 epcf90 f95 fort xlf95 ifc efc pgf95 lf95 gfortran + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. +set dummy $ac_tool_prefix$ac_prog; ac_word=$2 echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_STRIP+set}" = set; then +if test "${ac_cv_prog_F77+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else - if test -n "$STRIP"; then - ac_cv_prog_STRIP="$STRIP" # Let the user override the test. + if test -n "$F77"; then + ac_cv_prog_F77="$F77" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH @@ -4598,7 +4818,7 @@ test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_STRIP="${ac_tool_prefix}strip" + ac_cv_prog_F77="$ac_tool_prefix$ac_prog" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi @@ -4607,27 +4827,31 @@ fi fi -STRIP=$ac_cv_prog_STRIP -if test -n "$STRIP"; then - echo "$as_me:$LINENO: result: $STRIP" >&5 -echo "${ECHO_T}$STRIP" >&6 +F77=$ac_cv_prog_F77 +if test -n "$F77"; then + echo "$as_me:$LINENO: result: $F77" >&5 +echo "${ECHO_T}$F77" >&6 else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi + test -n "$F77" && break + done fi -if test -z "$ac_cv_prog_STRIP"; then - ac_ct_STRIP=$STRIP - # Extract the first word of "strip", so it can be a program name with args. -set dummy strip; ac_word=$2 +if test -z "$F77"; then + ac_ct_F77=$F77 + for ac_prog in g77 f77 xlf frt pgf77 fort77 fl32 af77 f90 xlf90 pgf90 epcf90 f95 fort xlf95 ifc efc pgf95 lf95 gfortran +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then +if test "${ac_cv_prog_ac_ct_F77+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else - if test -n "$ac_ct_STRIP"; then - ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. + if test -n "$ac_ct_F77"; then + ac_cv_prog_ac_ct_F77="$ac_ct_F77" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH @@ -4636,956 +4860,10727 @@ test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_STRIP="strip" + ac_cv_prog_ac_ct_F77="$ac_prog" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done - test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":" fi fi -ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP -if test -n "$ac_ct_STRIP"; then - echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 -echo "${ECHO_T}$ac_ct_STRIP" >&6 +ac_ct_F77=$ac_cv_prog_ac_ct_F77 +if test -n "$ac_ct_F77"; then + echo "$as_me:$LINENO: result: $ac_ct_F77" >&5 +echo "${ECHO_T}$ac_ct_F77" >&6 else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi - STRIP=$ac_ct_STRIP -else - STRIP="$ac_cv_prog_STRIP" -fi - - -enable_dlopen=no -enable_win32_dll=no + test -n "$ac_ct_F77" && break +done -# Check whether --enable-libtool-lock or --disable-libtool-lock was given. -if test "${enable_libtool_lock+set}" = set; then - enableval="$enable_libtool_lock" + F77=$ac_ct_F77 +fi -fi; -test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes -# Some flags need to be propagated to the compiler or linker for good -# libtool support. -case $host in -*-*-irix6*) - # Find out which ABI we are using. - echo '#line 4679 "configure"' > conftest.$ac_ext - if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 +# Provide some information about the compiler. +echo "$as_me:4889:" \ + "checking for Fortran 77 compiler version" >&5 +ac_compiler=`set X $ac_compile; echo $2` +{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version &5\"") >&5 + (eval $ac_compiler --version &5) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - case `/usr/bin/file conftest.$ac_objext` in - *32-bit*) - LD="${LD-ld} -32" - ;; - *N32*) - LD="${LD-ld} -n32" - ;; - *64-bit*) - LD="${LD-ld} -64" - ;; - esac - fi - rm -rf conftest* - ;; + (exit $ac_status); } +{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v &5\"") >&5 + (eval $ac_compiler -v &5) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V &5\"") >&5 + (eval $ac_compiler -V &5) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +rm -f a.out -*-*-sco3.2v5*) - # On SCO OpenServer 5, we need -belf to get full-featured binaries. - SAVE_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS -belf" - echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5 -echo $ECHO_N "checking whether the C compiler needs -belf... $ECHO_C" >&6 -if test "${lt_cv_cc_needs_belf+set}" = set; then +# If we don't use `.F' as extension, the preprocessor is not run on the +# input file. (Note that this only needs to work for GNU compilers.) +ac_save_ext=$ac_ext +ac_ext=F +echo "$as_me:$LINENO: checking whether we are using the GNU Fortran 77 compiler" >&5 +echo $ECHO_N "checking whether we are using the GNU Fortran 77 compiler... $ECHO_C" >&6 +if test "${ac_cv_f77_compiler_gnu+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else + cat >conftest.$ac_ext <<_ACEOF + program main +#ifndef __GNUC__ + choke me +#endif + end +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_f77_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_compiler_gnu=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 - ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +ac_compiler_gnu=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +ac_cv_f77_compiler_gnu=$ac_compiler_gnu -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif -int -main () -{ +fi +echo "$as_me:$LINENO: result: $ac_cv_f77_compiler_gnu" >&5 +echo "${ECHO_T}$ac_cv_f77_compiler_gnu" >&6 +ac_ext=$ac_save_ext +ac_test_FFLAGS=${FFLAGS+set} +ac_save_FFLAGS=$FFLAGS +FFLAGS= +echo "$as_me:$LINENO: checking whether $F77 accepts -g" >&5 +echo $ECHO_N "checking whether $F77 accepts -g... $ECHO_C" >&6 +if test "${ac_cv_prog_f77_g+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + FFLAGS=-g +cat >conftest.$ac_ext <<_ACEOF + program main - ; - return 0; -} + end _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -s conftest$ac_exeext' + { ac_try='test -z "$ac_f77_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then - lt_cv_cc_needs_belf=yes + ac_cv_prog_f77_g=yes else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 -lt_cv_cc_needs_belf=no +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_prog_f77_g=no fi -rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext - ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext fi -echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5 -echo "${ECHO_T}$lt_cv_cc_needs_belf" >&6 - if test x"$lt_cv_cc_needs_belf" != x"yes"; then - # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf - CFLAGS="$SAVE_CFLAGS" +echo "$as_me:$LINENO: result: $ac_cv_prog_f77_g" >&5 +echo "${ECHO_T}$ac_cv_prog_f77_g" >&6 +if test "$ac_test_FFLAGS" = set; then + FFLAGS=$ac_save_FFLAGS +elif test $ac_cv_prog_f77_g = yes; then + if test "x$ac_cv_f77_compiler_gnu" = xyes; then + FFLAGS="-g -O2" + else + FFLAGS="-g" fi - ;; +else + if test "x$ac_cv_f77_compiler_gnu" = xyes; then + FFLAGS="-O2" + else + FFLAGS= + fi +fi +G77=`test $ac_compiler_gnu = yes && echo yes` +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu -esac -# Sed substitution that helps us do robust quoting. It backslashifies -# metacharacters that are still active within double-quoted strings. -Xsed='sed -e s/^X//' -sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g' -# Same as above, but do not quote variable references. -double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g' +# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers! -# Sed substitution to delay expansion of an escaped shell variable in a -# double_quote_subst'ed string. -delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' +# find the maximum length of command line arguments +echo "$as_me:$LINENO: checking the maximum length of command line arguments" >&5 +echo $ECHO_N "checking the maximum length of command line arguments... $ECHO_C" >&6 +if test "${lt_cv_sys_max_cmd_len+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + i=0 + teststring="ABCD" + + case $build_os in + msdosdjgpp*) + # On DJGPP, this test can blow up pretty badly due to problems in libc + # (any single argument exceeding 2000 bytes causes a buffer overrun + # during glob expansion). Even if it were fixed, the result of this + # check would be larger than it should be. + lt_cv_sys_max_cmd_len=12288; # 12K is about right + ;; -# Constants: -rm="rm -f" + gnu*) + # Under GNU Hurd, this test is not required because there is + # no limit to the length of command line arguments. + # Libtool will interpret -1 as no limit whatsoever + lt_cv_sys_max_cmd_len=-1; + ;; -# Global variables: -default_ofile=libtool -can_build_shared=yes + cygwin* | mingw*) + # On Win9x/ME, this test blows up -- it succeeds, but takes + # about 5 minutes as the teststring grows exponentially. + # Worse, since 9x/ME are not pre-emptively multitasking, + # you end up with a "frozen" computer, even though with patience + # the test eventually succeeds (with a max line length of 256k). + # Instead, let's just punt: use the minimum linelength reported by + # all of the supported platforms: 8192 (on NT/2K/XP). + lt_cv_sys_max_cmd_len=8192; + ;; -# All known linkers require a `.a' archive for static linking (except M$VC, -# which needs '.lib'). -libext=a -ltmain="$ac_aux_dir/ltmain.sh" -ofile="$default_ofile" -with_gnu_ld="$lt_cv_prog_gnu_ld" -need_locks="$enable_libtool_lock" + amigaos*) + # On AmigaOS with pdksh, this test takes hours, literally. + # So we just punt and use a minimum line length of 8192. + lt_cv_sys_max_cmd_len=8192; + ;; -old_CC="$CC" -old_CFLAGS="$CFLAGS" + *) + # If test is not a shell built-in, we'll probably end up computing a + # maximum length that is only half of the actual maximum length, but + # we can't tell. + while (test "X"`$CONFIG_SHELL $0 --fallback-echo "X$teststring" 2>/dev/null` \ + = "XX$teststring") >/dev/null 2>&1 && + new_result=`expr "X$teststring" : ".*" 2>&1` && + lt_cv_sys_max_cmd_len=$new_result && + test $i != 17 # 1/2 MB should be enough + do + i=`expr $i + 1` + teststring=$teststring$teststring + done + teststring= + # Add a significant safety factor because C++ compilers can tack on massive + # amounts of additional arguments before passing them to the linker. + # It appears as though 1/2 is a usable value. + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` + ;; + esac -# Set sane defaults for various variables -test -z "$AR" && AR=ar -test -z "$AR_FLAGS" && AR_FLAGS=cru -test -z "$AS" && AS=as -test -z "$CC" && CC=cc -test -z "$DLLTOOL" && DLLTOOL=dlltool -test -z "$LD" && LD=ld -test -z "$LN_S" && LN_S="ln -s" -test -z "$MAGIC_CMD" && MAGIC_CMD=file -test -z "$NM" && NM=nm -test -z "$OBJDUMP" && OBJDUMP=objdump -test -z "$RANLIB" && RANLIB=: -test -z "$STRIP" && STRIP=: -test -z "$ac_objext" && ac_objext=o +fi -if test x"$host" != x"$build"; then - ac_tool_prefix=${host_alias}- +if test -n $lt_cv_sys_max_cmd_len ; then + echo "$as_me:$LINENO: result: $lt_cv_sys_max_cmd_len" >&5 +echo "${ECHO_T}$lt_cv_sys_max_cmd_len" >&6 else - ac_tool_prefix= + echo "$as_me:$LINENO: result: none" >&5 +echo "${ECHO_T}none" >&6 fi -# Transform linux* to *-*-linux-gnu*, to support old configure scripts. -case $host_os in -linux-gnu*) ;; -linux*) host=`echo $host | sed 's/^\(.*-.*-linux\)\(.*\)$/\1-gnu\2/'` -esac - -case $host_os in -aix3*) - # AIX sometimes has problems with the GCC collect2 program. For some - # reason, if we set the COLLECT_NAMES environment variable, the problems - # vanish in a puff of smoke. - if test "X${COLLECT_NAMES+set}" != Xset; then - COLLECT_NAMES= - export COLLECT_NAMES - fi - ;; -esac - -# Determine commands to create old-style static archives. -old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs' -old_postinstall_cmds='chmod 644 $oldlib' -old_postuninstall_cmds= -if test -n "$RANLIB"; then - case $host_os in - openbsd*) - old_postinstall_cmds="\$RANLIB -t \$oldlib~$old_postinstall_cmds" - ;; - *) - old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds" - ;; - esac - old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" -fi -# Allow CC to be a program name with arguments. -set dummy $CC -compiler="$2" -echo "$as_me:$LINENO: checking for objdir" >&5 -echo $ECHO_N "checking for objdir... $ECHO_C" >&6 -rm -f .libs 2>/dev/null -mkdir .libs 2>/dev/null -if test -d .libs; then - objdir=.libs +# Check for command to grab the raw symbol name followed by C symbol from nm. +echo "$as_me:$LINENO: checking command to parse $NM output from $compiler object" >&5 +echo $ECHO_N "checking command to parse $NM output from $compiler object... $ECHO_C" >&6 +if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 else - # MS-DOS does not allow filenames that begin with a dot. - objdir=_libs -fi -rmdir .libs 2>/dev/null -echo "$as_me:$LINENO: result: $objdir" >&5 -echo "${ECHO_T}$objdir" >&6 +# These are sane defaults that work on at least a few old systems. +# [They come from Ultrix. What could be older than Ultrix?!! ;)] +# Character class describing NM global symbol codes. +symcode='[BCDEGRST]' -# Check whether --with-pic or --without-pic was given. -if test "${with_pic+set}" = set; then - withval="$with_pic" - pic_mode="$withval" -else - pic_mode=default -fi; -test -z "$pic_mode" && pic_mode=default +# Regexp to match symbols that can be accessed directly from C. +sympat='\([_A-Za-z][_A-Za-z0-9]*\)' -# We assume here that the value for lt_cv_prog_cc_pic will not be cached -# in isolation, and that seeing it set (from the cache) indicates that -# the associated values are set (in the cache) correctly too. -echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 -echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6 -if test "${lt_cv_prog_cc_pic+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - lt_cv_prog_cc_pic= - lt_cv_prog_cc_shlib= - lt_cv_prog_cc_wl= - lt_cv_prog_cc_static= - lt_cv_prog_cc_no_builtin= - lt_cv_prog_cc_can_build_shared=$can_build_shared +# Transform the above into a raw symbol and a C symbol. +symxfrm='\1 \2\3 \3' - if test "$GCC" = yes; then - lt_cv_prog_cc_wl='-Wl,' - lt_cv_prog_cc_static='-static' +# Transform an extracted symbol line into a proper C declaration +lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'" - case $host_os in - aix*) - # Below there is a dirty hack to force normal static linking with -ldl - # The problem is because libdl dynamically linked with both libc and - # libC (AIX C++ library), which obviously doesn't included in libraries - # list by gcc. This cause undefined symbols with -static flags. - # This hack allows C programs to be linked with "-static -ldl", but - # not sure about C++ programs. - lt_cv_prog_cc_static="$lt_cv_prog_cc_static ${lt_cv_prog_cc_wl}-lC" - ;; - amigaos*) - # FIXME: we need at least 68020 code to build shared libraries, but - # adding the `-m68020' flag to GCC prevents building anything better, - # like `-m68040'. - lt_cv_prog_cc_pic='-m68020 -resident32 -malways-restore-a4' - ;; - beos* | irix5* | irix6* | osf3* | osf4* | osf5*) - # PIC is the default for these OSes. - ;; - darwin* | rhapsody*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - lt_cv_prog_cc_pic='-fno-common' - ;; - cygwin* | mingw* | pw32* | os2*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - lt_cv_prog_cc_pic='-DDLL_EXPORT' - ;; - sysv4*MP*) - if test -d /usr/nec; then - lt_cv_prog_cc_pic=-Kconform_pic - fi - ;; - *) - lt_cv_prog_cc_pic='-fPIC' - ;; - esac - else - # PORTME Check for PIC flags for the system compiler. - case $host_os in - aix3* | aix4* | aix5*) - lt_cv_prog_cc_wl='-Wl,' - # All AIX code is PIC. - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - lt_cv_prog_cc_static='-Bstatic' - else - lt_cv_prog_cc_static='-bnso -bI:/lib/syscalls.exp' - fi - ;; - - hpux9* | hpux10* | hpux11*) - # Is there a better lt_cv_prog_cc_static that works with the bundled CC? - lt_cv_prog_cc_wl='-Wl,' - lt_cv_prog_cc_static="${lt_cv_prog_cc_wl}-a ${lt_cv_prog_cc_wl}archive" - lt_cv_prog_cc_pic='+Z' - ;; +# Transform an extracted symbol line into symbol name and symbol address +lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" - irix5* | irix6*) - lt_cv_prog_cc_wl='-Wl,' - lt_cv_prog_cc_static='-non_shared' - # PIC (with -KPIC) is the default. - ;; +# Define system-specific variables. +case $host_os in +aix*) + symcode='[BCDT]' + ;; +cygwin* | mingw* | pw32*) + symcode='[ABCDGISTW]' + ;; +hpux*) # Its linker distinguishes data from code symbols + if test "$host_cpu" = ia64; then + symcode='[ABCDEGRST]' + fi + lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" + lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" + ;; +irix* | nonstopux*) + symcode='[BCDEGRST]' + ;; +osf*) + symcode='[BCDEGQRST]' + ;; +solaris* | sysv5*) + symcode='[BDRT]' + ;; +sysv4) + symcode='[DFNSTU]' + ;; +esac - cygwin* | mingw* | pw32* | os2*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - lt_cv_prog_cc_pic='-DDLL_EXPORT' - ;; +# Handle CRLF in mingw tool chain +opt_cr= +case $build_os in +mingw*) + opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp + ;; +esac - newsos6) - lt_cv_prog_cc_pic='-KPIC' - lt_cv_prog_cc_static='-Bstatic' - ;; +# If we're using GNU nm, then use its standard symbol codes. +case `$NM -V 2>&1` in +*GNU* | *'with BFD'*) + symcode='[ABCDGIRSTW]' ;; +esac - osf3* | osf4* | osf5*) - # All OSF/1 code is PIC. - lt_cv_prog_cc_wl='-Wl,' - lt_cv_prog_cc_static='-non_shared' - ;; +# Try without a prefix undercore, then with it. +for ac_symprfx in "" "_"; do - sco3.2v5*) - lt_cv_prog_cc_pic='-Kpic' - lt_cv_prog_cc_static='-dn' - lt_cv_prog_cc_shlib='-belf' - ;; + # Write the raw and C identifiers. + lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'" - solaris*) - lt_cv_prog_cc_pic='-KPIC' - lt_cv_prog_cc_static='-Bstatic' - lt_cv_prog_cc_wl='-Wl,' - ;; + # Check to see that the pipe works correctly. + pipe_works=no - sunos4*) - lt_cv_prog_cc_pic='-PIC' - lt_cv_prog_cc_static='-Bstatic' - lt_cv_prog_cc_wl='-Qoption ld ' - ;; + rm -f conftest* + cat > conftest.$ac_ext <&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + # Now try to grab the symbols. + nlist=conftest.nm + if { (eval echo "$as_me:$LINENO: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\"") >&5 + (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && test -s "$nlist"; then + # Try sorting and uniquifying the output. + if sort "$nlist" | uniq > "$nlist"T; then + mv -f "$nlist"T "$nlist" else - lt_cv_prog_cc_wl='-Wl,' - fi - ;; - - uts4*) - lt_cv_prog_cc_pic='-pic' - lt_cv_prog_cc_static='-Bstatic' - ;; - - sysv4*MP*) - if test -d /usr/nec ;then - lt_cv_prog_cc_pic='-Kconform_pic' - lt_cv_prog_cc_static='-Bstatic' + rm -f "$nlist"T fi - ;; - *) - lt_cv_prog_cc_can_build_shared=no - ;; - esac - fi - -fi - -if test -z "$lt_cv_prog_cc_pic"; then - echo "$as_me:$LINENO: result: none" >&5 -echo "${ECHO_T}none" >&6 -else - echo "$as_me:$LINENO: result: $lt_cv_prog_cc_pic" >&5 -echo "${ECHO_T}$lt_cv_prog_cc_pic" >&6 + # Make sure that we snagged all the symbols we need. + if grep ' nm_test_var$' "$nlist" >/dev/null; then + if grep ' nm_test_func$' "$nlist" >/dev/null; then + cat < conftest.$ac_ext +#ifdef __cplusplus +extern "C" { +#endif - # Check to make sure the pic_flag actually works. - echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_cv_prog_cc_pic works" >&5 -echo $ECHO_N "checking if $compiler PIC flag $lt_cv_prog_cc_pic works... $ECHO_C" >&6 - if test "${lt_cv_prog_cc_pic_works+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - save_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS $lt_cv_prog_cc_pic -DPIC" - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +EOF + # Now generate the symbol file. + eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext' -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } + cat <> conftest.$ac_ext +#if defined (__STDC__) && __STDC__ +# define lt_ptr_t void * +#else +# define lt_ptr_t char * +# define const #endif -int -main () + +/* The mapping between symbol names and symbols. */ +const struct { + const char *name; + lt_ptr_t address; +} +lt_preloaded_symbols[] = { +EOF + $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext + cat <<\EOF >> conftest.$ac_ext + {0, (lt_ptr_t) 0} +}; - ; - return 0; +#ifdef __cplusplus } -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 +#endif +EOF + # Now try linking the two files. + mv conftest.$ac_objext conftstm.$ac_objext + lt_save_LIBS="$LIBS" + lt_save_CFLAGS="$CFLAGS" + LIBS="conftstm.$ac_objext" + CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag" + if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - case $host_os in - hpux9* | hpux10* | hpux11*) - # On HP-UX, both CC and GCC only warn that PIC is supported... then - # they create non-PIC objects. So, if there were any warnings, we - # assume that PIC is not supported. - if test -s conftest.err; then - lt_cv_prog_cc_pic_works=no + (exit $ac_status); } && test -s conftest${ac_exeext}; then + pipe_works=yes + fi + LIBS="$lt_save_LIBS" + CFLAGS="$lt_save_CFLAGS" else - lt_cv_prog_cc_pic_works=yes + echo "cannot find nm_test_func in $nlist" >&5 fi - ;; - *) - lt_cv_prog_cc_pic_works=yes - ;; - esac - -else - echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 - lt_cv_prog_cc_pic_works=no - -fi -rm -f conftest.$ac_objext conftest.$ac_ext - CFLAGS="$save_CFLAGS" - -fi - + else + echo "cannot find nm_test_var in $nlist" >&5 + fi + else + echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5 + fi + else + echo "$progname: failed program was:" >&5 + cat conftest.$ac_ext >&5 + fi + rm -f conftest* conftst* - if test "X$lt_cv_prog_cc_pic_works" = Xno; then - lt_cv_prog_cc_pic= - lt_cv_prog_cc_can_build_shared=no + # Do not use the global_symbol_pipe unless it works. + if test "$pipe_works" = yes; then + break else - lt_cv_prog_cc_pic=" $lt_cv_prog_cc_pic" + lt_cv_sys_global_symbol_pipe= fi +done - echo "$as_me:$LINENO: result: $lt_cv_prog_cc_pic_works" >&5 -echo "${ECHO_T}$lt_cv_prog_cc_pic_works" >&6 fi -# Check for any special shared library compilation flags. -if test -n "$lt_cv_prog_cc_shlib"; then - { echo "$as_me:$LINENO: WARNING: \`$CC' requires \`$lt_cv_prog_cc_shlib' to build shared libraries" >&5 -echo "$as_me: WARNING: \`$CC' requires \`$lt_cv_prog_cc_shlib' to build shared libraries" >&2;} - if echo "$old_CC $old_CFLAGS " | egrep -e "[ ]$lt_cv_prog_cc_shlib[ ]" >/dev/null; then : - else - { echo "$as_me:$LINENO: WARNING: add \`$lt_cv_prog_cc_shlib' to the CC or CFLAGS env variable and reconfigure" >&5 -echo "$as_me: WARNING: add \`$lt_cv_prog_cc_shlib' to the CC or CFLAGS env variable and reconfigure" >&2;} - lt_cv_prog_cc_can_build_shared=no - fi +if test -z "$lt_cv_sys_global_symbol_pipe"; then + lt_cv_sys_global_symbol_to_cdecl= +fi +if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then + echo "$as_me:$LINENO: result: failed" >&5 +echo "${ECHO_T}failed" >&6 +else + echo "$as_me:$LINENO: result: ok" >&5 +echo "${ECHO_T}ok" >&6 fi -echo "$as_me:$LINENO: checking if $compiler static flag $lt_cv_prog_cc_static works" >&5 -echo $ECHO_N "checking if $compiler static flag $lt_cv_prog_cc_static works... $ECHO_C" >&6 -if test "${lt_cv_prog_cc_static_works+set}" = set; then +echo "$as_me:$LINENO: checking for objdir" >&5 +echo $ECHO_N "checking for objdir... $ECHO_C" >&6 +if test "${lt_cv_objdir+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else - lt_cv_prog_cc_static_works=no - save_LDFLAGS="$LDFLAGS" - LDFLAGS="$LDFLAGS $lt_cv_prog_cc_static" - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" - -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - lt_cv_prog_cc_static_works=yes + rm -f .libs 2>/dev/null +mkdir .libs 2>/dev/null +if test -d .libs; then + lt_cv_objdir=.libs else - echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 + # MS-DOS does not allow filenames that begin with a dot. + lt_cv_objdir=_libs fi -rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext - LDFLAGS="$save_LDFLAGS" - +rmdir .libs 2>/dev/null fi +echo "$as_me:$LINENO: result: $lt_cv_objdir" >&5 +echo "${ECHO_T}$lt_cv_objdir" >&6 +objdir=$lt_cv_objdir -# Belt *and* braces to stop my trousers falling down: -test "X$lt_cv_prog_cc_static_works" = Xno && lt_cv_prog_cc_static= -echo "$as_me:$LINENO: result: $lt_cv_prog_cc_static_works" >&5 -echo "${ECHO_T}$lt_cv_prog_cc_static_works" >&6 -pic_flag="$lt_cv_prog_cc_pic" -special_shlib_compile_flags="$lt_cv_prog_cc_shlib" -wl="$lt_cv_prog_cc_wl" -link_static_flag="$lt_cv_prog_cc_static" -no_builtin_flag="$lt_cv_prog_cc_no_builtin" -can_build_shared="$lt_cv_prog_cc_can_build_shared" -# Check to see if options -o and -c are simultaneously supported by compiler -echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 -echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6 -if test "${lt_cv_compiler_c_o+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else +case $host_os in +aix3*) + # AIX sometimes has problems with the GCC collect2 program. For some + # reason, if we set the COLLECT_NAMES environment variable, the problems + # vanish in a puff of smoke. + if test "X${COLLECT_NAMES+set}" != Xset; then + COLLECT_NAMES= + export COLLECT_NAMES + fi + ;; +esac -$rm -r conftest 2>/dev/null -mkdir conftest -cd conftest -echo "int some_variable = 0;" > conftest.$ac_ext -mkdir out -# According to Tom Tromey, Ian Lance Taylor reported there are C compilers -# that will create temporary files in the current directory regardless of -# the output directory. Thus, making CWD read-only will cause this test -# to fail, enabling locking or at least warning the user not to do parallel -# builds. -chmod -w . -save_CFLAGS="$CFLAGS" -CFLAGS="$CFLAGS -o out/conftest2.$ac_objext" -compiler_c_o=no -if { (eval echo configure:5215: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>out/conftest.err; } && test -s out/conftest2.$ac_objext; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s out/conftest.err; then - lt_cv_compiler_c_o=no - else - lt_cv_compiler_c_o=yes - fi -else - # Append any errors to the config.log. - cat out/conftest.err 1>&5 - lt_cv_compiler_c_o=no -fi -CFLAGS="$save_CFLAGS" -chmod u+w . -$rm conftest* out/* -rmdir out -cd .. -rmdir conftest -$rm -r conftest 2>/dev/null +# Sed substitution that helps us do robust quoting. It backslashifies +# metacharacters that are still active within double-quoted strings. +Xsed='sed -e s/^X//' +sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g' -fi +# Same as above, but do not quote variable references. +double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g' -compiler_c_o=$lt_cv_compiler_c_o -echo "$as_me:$LINENO: result: $compiler_c_o" >&5 -echo "${ECHO_T}$compiler_c_o" >&6 - -if test x"$compiler_c_o" = x"yes"; then - # Check to see if we can write to a .lo - echo "$as_me:$LINENO: checking if $compiler supports -c -o file.lo" >&5 -echo $ECHO_N "checking if $compiler supports -c -o file.lo... $ECHO_C" >&6 - if test "${lt_cv_compiler_o_lo+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else +# Sed substitution to delay expansion of an escaped shell variable in a +# double_quote_subst'ed string. +delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' - lt_cv_compiler_o_lo=no - save_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS -c -o conftest.lo" - save_objext="$ac_objext" - ac_objext=lo - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +# Sed substitution to avoid accidental globbing in evaled expressions +no_glob_subst='s/\*/\\\*/g' -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif -int -main () -{ -int some_variable = 0; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s conftest.err; then - lt_cv_compiler_o_lo=no - else - lt_cv_compiler_o_lo=yes - fi +# Constants: +rm="rm -f" + +# Global variables: +default_ofile=libtool +can_build_shared=yes + +# All known linkers require a `.a' archive for static linking (except M$VC, +# which needs '.lib'). +libext=a +ltmain="$ac_aux_dir/ltmain.sh" +ofile="$default_ofile" +with_gnu_ld="$lt_cv_prog_gnu_ld" +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args. +set dummy ${ac_tool_prefix}ar; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_AR+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 else - echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 -fi -rm -f conftest.$ac_objext conftest.$ac_ext - ac_objext="$save_objext" - CFLAGS="$save_CFLAGS" + if test -n "$AR"; then + ac_cv_prog_AR="$AR" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_AR="${ac_tool_prefix}ar" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done fi - - compiler_o_lo=$lt_cv_compiler_o_lo - echo "$as_me:$LINENO: result: $compiler_o_lo" >&5 -echo "${ECHO_T}$compiler_o_lo" >&6 +fi +AR=$ac_cv_prog_AR +if test -n "$AR"; then + echo "$as_me:$LINENO: result: $AR" >&5 +echo "${ECHO_T}$AR" >&6 else - compiler_o_lo=no + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 fi -# Check to see if we can do hard links to lock some files if needed -hard_links="nottested" -if test "$compiler_c_o" = no && test "$need_locks" != no; then - # do not overwrite the value of need_locks provided by the user - echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 -echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6 - hard_links=yes - $rm conftest* - ln conftest.a conftest.b 2>/dev/null && hard_links=no - touch conftest.a - ln conftest.a conftest.b 2>&5 || hard_links=no - ln conftest.a conftest.b 2>/dev/null && hard_links=no - echo "$as_me:$LINENO: result: $hard_links" >&5 -echo "${ECHO_T}$hard_links" >&6 - if test "$hard_links" = no; then - { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 -echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} - need_locks=warn +fi +if test -z "$ac_cv_prog_AR"; then + ac_ct_AR=$AR + # Extract the first word of "ar", so it can be a program name with args. +set dummy ar; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_ac_ct_AR+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$ac_ct_AR"; then + ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_AR="ar" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 fi +done +done + + test -z "$ac_cv_prog_ac_ct_AR" && ac_cv_prog_ac_ct_AR="false" +fi +fi +ac_ct_AR=$ac_cv_prog_ac_ct_AR +if test -n "$ac_ct_AR"; then + echo "$as_me:$LINENO: result: $ac_ct_AR" >&5 +echo "${ECHO_T}$ac_ct_AR" >&6 else - need_locks=no + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 fi -if test "$GCC" = yes; then - # Check to see if options -fno-rtti -fno-exceptions are supported by compiler - echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 -echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6 - echo "int some_variable = 0;" > conftest.$ac_ext - save_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS -fno-rtti -fno-exceptions -c conftest.$ac_ext" - compiler_rtti_exceptions=no - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" - -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif -int -main () -{ -int some_variable = 0; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s conftest.err; then - compiler_rtti_exceptions=no - else - compiler_rtti_exceptions=yes - fi - + AR=$ac_ct_AR else - echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 + AR="$ac_cv_prog_AR" fi -rm -f conftest.$ac_objext conftest.$ac_ext - CFLAGS="$save_CFLAGS" - echo "$as_me:$LINENO: result: $compiler_rtti_exceptions" >&5 -echo "${ECHO_T}$compiler_rtti_exceptions" >&6 - if test "$compiler_rtti_exceptions" = "yes"; then - no_builtin_flag=' -fno-builtin -fno-rtti -fno-exceptions' - else - no_builtin_flag=' -fno-builtin' +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. +set dummy ${ac_tool_prefix}ranlib; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_RANLIB+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$RANLIB"; then + ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 fi -fi - -# See if the linker supports building shared libraries. -echo "$as_me:$LINENO: checking whether the linker ($LD) supports shared libraries" >&5 -echo $ECHO_N "checking whether the linker ($LD) supports shared libraries... $ECHO_C" >&6 +done +done -allow_undefined_flag= -no_undefined_flag= -need_lib_prefix=unknown -need_version=unknown -# when you set need_version to no, make sure it does not cause -set_version -# flags to be left without arguments -archive_cmds= -archive_expsym_cmds= -old_archive_from_new_cmds= -old_archive_from_expsyms_cmds= -export_dynamic_flag_spec= -whole_archive_flag_spec= -thread_safe_flag_spec= -hardcode_into_libs=no -hardcode_libdir_flag_spec= -hardcode_libdir_separator= -hardcode_direct=no -hardcode_minus_L=no -hardcode_shlibpath_var=unsupported -runpath_var= -link_all_deplibs=unknown -always_export_symbols=no -export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | sed '\''s/.* //'\'' | sort | uniq > $export_symbols' -# include_expsyms should be a list of space-separated symbols to be *always* -# included in the symbol list -include_expsyms= -# exclude_expsyms can be an egrep regular expression of symbols to exclude -# it will be wrapped by ` (' and `)$', so one must not match beginning or -# end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', -# as well as any symbol that contains `d'. -exclude_expsyms="_GLOBAL_OFFSET_TABLE_" -# Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out -# platforms (ab)use it in PIC code, but their linkers get confused if -# the symbol is explicitly referenced. Since portable code cannot -# rely on this symbol name, it's probably fine to never include it in -# preloaded symbol tables. -extract_expsyms_cmds= +fi +fi +RANLIB=$ac_cv_prog_RANLIB +if test -n "$RANLIB"; then + echo "$as_me:$LINENO: result: $RANLIB" >&5 +echo "${ECHO_T}$RANLIB" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi -case $host_os in -cygwin* | mingw* | pw32*) - # FIXME: the MSVC++ port hasn't been tested in a loooong time - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - if test "$GCC" != yes; then - with_gnu_ld=no +fi +if test -z "$ac_cv_prog_RANLIB"; then + ac_ct_RANLIB=$RANLIB + # Extract the first word of "ranlib", so it can be a program name with args. +set dummy ranlib; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$ac_ct_RANLIB"; then + ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_RANLIB="ranlib" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 fi - ;; -openbsd*) - with_gnu_ld=no - ;; -esac - -ld_shlibs=yes -if test "$with_gnu_ld" = yes; then - # If archive_cmds runs LD, not CC, wlarc should be empty - wlarc='${wl}' - - # See if GNU ld supports shared libraries. - case $host_os in - aix3* | aix4* | aix5*) - # On AIX, the GNU linker is very broken - # Note:Check GNU linker on AIX 5-IA64 when/if it becomes available. - ld_shlibs=no - cat <&2 - -*** Warning: the GNU linker, at least up to release 2.9.1, is reported -*** to be unable to reliably create shared libraries on AIX. -*** Therefore, libtool is disabling shared libraries support. If you -*** really care for shared libraries, you may want to modify your PATH -*** so that a non-GNU linker is found, and then restart. +done +done -EOF - ;; + test -z "$ac_cv_prog_ac_ct_RANLIB" && ac_cv_prog_ac_ct_RANLIB=":" +fi +fi +ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB +if test -n "$ac_ct_RANLIB"; then + echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 +echo "${ECHO_T}$ac_ct_RANLIB" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi - amigaos*) - archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - - # Samuel A. Falvo II reports - # that the semantics of dynamic libraries on AmigaOS, at least up - # to version 4, is to share data among multiple programs linked - # with the same dynamic library. Since this doesn't match the - # behavior of shared libraries on other platforms, we can use - # them. - ld_shlibs=no - ;; + RANLIB=$ac_ct_RANLIB +else + RANLIB="$ac_cv_prog_RANLIB" +fi +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. +set dummy ${ac_tool_prefix}strip; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_STRIP+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$STRIP"; then + ac_cv_prog_STRIP="$STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_STRIP="${ac_tool_prefix}strip" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +STRIP=$ac_cv_prog_STRIP +if test -n "$STRIP"; then + echo "$as_me:$LINENO: result: $STRIP" >&5 +echo "${ECHO_T}$STRIP" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + +fi +if test -z "$ac_cv_prog_STRIP"; then + ac_ct_STRIP=$STRIP + # Extract the first word of "strip", so it can be a program name with args. +set dummy strip; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$ac_ct_STRIP"; then + ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_STRIP="strip" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + + test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":" +fi +fi +ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP +if test -n "$ac_ct_STRIP"; then + echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 +echo "${ECHO_T}$ac_ct_STRIP" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + STRIP=$ac_ct_STRIP +else + STRIP="$ac_cv_prog_STRIP" +fi + + +old_CC="$CC" +old_CFLAGS="$CFLAGS" + +# Set sane defaults for various variables +test -z "$AR" && AR=ar +test -z "$AR_FLAGS" && AR_FLAGS=cru +test -z "$AS" && AS=as +test -z "$CC" && CC=cc +test -z "$LTCC" && LTCC=$CC +test -z "$DLLTOOL" && DLLTOOL=dlltool +test -z "$LD" && LD=ld +test -z "$LN_S" && LN_S="ln -s" +test -z "$MAGIC_CMD" && MAGIC_CMD=file +test -z "$NM" && NM=nm +test -z "$SED" && SED=sed +test -z "$OBJDUMP" && OBJDUMP=objdump +test -z "$RANLIB" && RANLIB=: +test -z "$STRIP" && STRIP=: +test -z "$ac_objext" && ac_objext=o + +# Determine commands to create old-style static archives. +old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs' +old_postinstall_cmds='chmod 644 $oldlib' +old_postuninstall_cmds= + +if test -n "$RANLIB"; then + case $host_os in + openbsd*) + old_postinstall_cmds="\$RANLIB -t \$oldlib~$old_postinstall_cmds" + ;; + *) + old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds" + ;; + esac + old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" +fi + +# Only perform the check for file, if the check method requires it +case $deplibs_check_method in +file_magic*) + if test "$file_magic_cmd" = '$MAGIC_CMD'; then + echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5 +echo $ECHO_N "checking for ${ac_tool_prefix}file... $ECHO_C" >&6 +if test "${lt_cv_path_MAGIC_CMD+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + case $MAGIC_CMD in +[\\/*] | ?:[\\/]*) + lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. + ;; +*) + lt_save_MAGIC_CMD="$MAGIC_CMD" + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" + for ac_dir in $ac_dummy; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/${ac_tool_prefix}file; then + lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file" + if test -n "$file_magic_test_file"; then + case $deplibs_check_method in + "file_magic "*) + file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`" + MAGIC_CMD="$lt_cv_path_MAGIC_CMD" + if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | + $EGREP "$file_magic_regex" > /dev/null; then + : + else + cat <&2 + +*** Warning: the command libtool uses to detect shared libraries, +*** $file_magic_cmd, produces output that libtool cannot recognize. +*** The result is that libtool may fail to recognize shared libraries +*** as such. This will affect the creation of libtool libraries that +*** depend on shared libraries, but programs linked with such libtool +*** libraries will work regardless of this problem. Nevertheless, you +*** may want to report the problem to your system manager and/or to +*** bug-libtool@gnu.org + +EOF + fi ;; + esac + fi + break + fi + done + IFS="$lt_save_ifs" + MAGIC_CMD="$lt_save_MAGIC_CMD" + ;; +esac +fi + +MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +if test -n "$MAGIC_CMD"; then + echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 +echo "${ECHO_T}$MAGIC_CMD" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + +if test -z "$lt_cv_path_MAGIC_CMD"; then + if test -n "$ac_tool_prefix"; then + echo "$as_me:$LINENO: checking for file" >&5 +echo $ECHO_N "checking for file... $ECHO_C" >&6 +if test "${lt_cv_path_MAGIC_CMD+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + case $MAGIC_CMD in +[\\/*] | ?:[\\/]*) + lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. + ;; +*) + lt_save_MAGIC_CMD="$MAGIC_CMD" + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" + for ac_dir in $ac_dummy; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/file; then + lt_cv_path_MAGIC_CMD="$ac_dir/file" + if test -n "$file_magic_test_file"; then + case $deplibs_check_method in + "file_magic "*) + file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`" + MAGIC_CMD="$lt_cv_path_MAGIC_CMD" + if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | + $EGREP "$file_magic_regex" > /dev/null; then + : + else + cat <&2 + +*** Warning: the command libtool uses to detect shared libraries, +*** $file_magic_cmd, produces output that libtool cannot recognize. +*** The result is that libtool may fail to recognize shared libraries +*** as such. This will affect the creation of libtool libraries that +*** depend on shared libraries, but programs linked with such libtool +*** libraries will work regardless of this problem. Nevertheless, you +*** may want to report the problem to your system manager and/or to +*** bug-libtool@gnu.org + +EOF + fi ;; + esac + fi + break + fi + done + IFS="$lt_save_ifs" + MAGIC_CMD="$lt_save_MAGIC_CMD" + ;; +esac +fi + +MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +if test -n "$MAGIC_CMD"; then + echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 +echo "${ECHO_T}$MAGIC_CMD" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + else + MAGIC_CMD=: + fi +fi + + fi + ;; +esac + +enable_dlopen=no +enable_win32_dll=no + +# Check whether --enable-libtool-lock or --disable-libtool-lock was given. +if test "${enable_libtool_lock+set}" = set; then + enableval="$enable_libtool_lock" + +fi; +test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes + + +# Check whether --with-pic or --without-pic was given. +if test "${with_pic+set}" = set; then + withval="$with_pic" + pic_mode="$withval" +else + pic_mode=default +fi; +test -z "$pic_mode" && pic_mode=default + +# Use C for the default configuration in the libtool script +tagname= +lt_save_CC="$CC" +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + +# Source file extension for C test sources. +ac_ext=c + +# Object file extension for compiled C test sources. +objext=o +objext=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code="int some_variable = 0;\n" + +# Code to be used in simple link tests +lt_simple_link_test_code='int main(){return(0);}\n' + + +# If no C compiler was specified, use CC. +LTCC=${LTCC-"$CC"} + +# Allow CC to be a program name with arguments. +compiler=$CC + + +# +# Check for any special shared library compilation flags. +# +lt_prog_cc_shlib= +if test "$GCC" = no; then + case $host_os in + sco3.2v5*) + lt_prog_cc_shlib='-belf' + ;; + esac +fi +if test -n "$lt_prog_cc_shlib"; then + { echo "$as_me:$LINENO: WARNING: \`$CC' requires \`$lt_prog_cc_shlib' to build shared libraries" >&5 +echo "$as_me: WARNING: \`$CC' requires \`$lt_prog_cc_shlib' to build shared libraries" >&2;} + if echo "$old_CC $old_CFLAGS " | grep "[ ]$lt_prog_cc_shlib[ ]" >/dev/null; then : + else + { echo "$as_me:$LINENO: WARNING: add \`$lt_prog_cc_shlib' to the CC or CFLAGS env variable and reconfigure" >&5 +echo "$as_me: WARNING: add \`$lt_prog_cc_shlib' to the CC or CFLAGS env variable and reconfigure" >&2;} + lt_cv_prog_cc_can_build_shared=no + fi +fi + + +# +# Check to make sure the static flag actually works. +# +echo "$as_me:$LINENO: checking if $compiler static flag $lt_prog_compiler_static works" >&5 +echo $ECHO_N "checking if $compiler static flag $lt_prog_compiler_static works... $ECHO_C" >&6 +if test "${lt_prog_compiler_static_works+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + lt_prog_compiler_static_works=no + save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS $lt_prog_compiler_static" + printf "$lt_simple_link_test_code" > conftest.$ac_ext + if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s conftest.err; then + # Append any errors to the config.log. + cat conftest.err 1>&5 + else + lt_prog_compiler_static_works=yes + fi + fi + $rm conftest* + LDFLAGS="$save_LDFLAGS" + +fi +echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works" >&5 +echo "${ECHO_T}$lt_prog_compiler_static_works" >&6 + +if test x"$lt_prog_compiler_static_works" = xyes; then + : +else + lt_prog_compiler_static= +fi + + + + +lt_prog_compiler_no_builtin_flag= + +if test "$GCC" = yes; then + lt_prog_compiler_no_builtin_flag=' -fno-builtin' + + +echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 +echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6 +if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + lt_cv_prog_compiler_rtti_exceptions=no + ac_outfile=conftest.$ac_objext + printf "$lt_simple_compile_test_code" > conftest.$ac_ext + lt_compiler_flag="-fno-rtti -fno-exceptions" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + # The option is referenced via a variable to avoid confusing sed. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:5921: $lt_compile\"" >&5) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&5 + echo "$as_me:5925: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + if test ! -s conftest.err; then + lt_cv_prog_compiler_rtti_exceptions=yes + fi + fi + $rm conftest* + +fi +echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 +echo "${ECHO_T}$lt_cv_prog_compiler_rtti_exceptions" >&6 + +if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then + lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions" +else + : +fi + +fi + +lt_prog_compiler_wl= +lt_prog_compiler_pic= +lt_prog_compiler_static= + +echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 +echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6 + + if test "$GCC" = yes; then + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_static='-static' + + case $host_os in + aix*) + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + lt_prog_compiler_static='-Bstatic' + fi + ;; + + amigaos*) + # FIXME: we need at least 68020 code to build shared libraries, but + # adding the `-m68020' flag to GCC prevents building anything better, + # like `-m68040'. + lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4' + ;; + + beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) + # PIC is the default for these OSes. + ;; + + mingw* | pw32* | os2*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + lt_prog_compiler_pic='-DDLL_EXPORT' + ;; + + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + lt_prog_compiler_pic='-fno-common' + ;; + + msdosdjgpp*) + # Just because we use GCC doesn't mean we suddenly get shared libraries + # on systems that don't support them. + lt_prog_compiler_can_build_shared=no + enable_shared=no + ;; + + sysv4*MP*) + if test -d /usr/nec; then + lt_prog_compiler_pic=-Kconform_pic + fi + ;; + + hpux*) + # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but + # not for PA HP-UX. + case "$host_cpu" in + hppa*64*|ia64*) + # +Z the default + ;; + *) + lt_prog_compiler_pic='-fPIC' + ;; + esac + ;; + + *) + lt_prog_compiler_pic='-fPIC' + ;; + esac + else + # PORTME Check for flag to pass linker flags through the system compiler. + case $host_os in + aix*) + lt_prog_compiler_wl='-Wl,' + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + lt_prog_compiler_static='-Bstatic' + else + lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp' + fi + ;; + + mingw* | pw32* | os2*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + lt_prog_compiler_pic='-DDLL_EXPORT' + ;; + + hpux9* | hpux10* | hpux11*) + lt_prog_compiler_wl='-Wl,' + # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but + # not for PA HP-UX. + case "$host_cpu" in + hppa*64*|ia64*) + # +Z the default + ;; + *) + lt_prog_compiler_pic='+Z' + ;; + esac + # Is there a better lt_prog_compiler_static that works with the bundled CC? + lt_prog_compiler_static='${wl}-a ${wl}archive' + ;; + + irix5* | irix6* | nonstopux*) + lt_prog_compiler_wl='-Wl,' + # PIC (with -KPIC) is the default. + lt_prog_compiler_static='-non_shared' + ;; + + newsos6) + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + ;; + + linux*) + case $CC in + icc* | ecc*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-static' + ;; + ccc*) + lt_prog_compiler_wl='-Wl,' + # All Alpha code is PIC. + lt_prog_compiler_static='-non_shared' + ;; + esac + ;; + + osf3* | osf4* | osf5*) + lt_prog_compiler_wl='-Wl,' + # All OSF/1 code is PIC. + lt_prog_compiler_static='-non_shared' + ;; + + sco3.2v5*) + lt_prog_compiler_pic='-Kpic' + lt_prog_compiler_static='-dn' + ;; + + solaris*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + ;; + + sunos4*) + lt_prog_compiler_wl='-Qoption ld ' + lt_prog_compiler_pic='-PIC' + lt_prog_compiler_static='-Bstatic' + ;; + + sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + ;; + + sysv4*MP*) + if test -d /usr/nec ;then + lt_prog_compiler_pic='-Kconform_pic' + lt_prog_compiler_static='-Bstatic' + fi + ;; + + uts4*) + lt_prog_compiler_pic='-pic' + lt_prog_compiler_static='-Bstatic' + ;; + + *) + lt_prog_compiler_can_build_shared=no + ;; + esac + fi + +echo "$as_me:$LINENO: result: $lt_prog_compiler_pic" >&5 +echo "${ECHO_T}$lt_prog_compiler_pic" >&6 + +# +# Check to make sure the PIC flag actually works. +# +if test -n "$lt_prog_compiler_pic"; then + +echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5 +echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic works... $ECHO_C" >&6 +if test "${lt_prog_compiler_pic_works+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + lt_prog_compiler_pic_works=no + ac_outfile=conftest.$ac_objext + printf "$lt_simple_compile_test_code" > conftest.$ac_ext + lt_compiler_flag="$lt_prog_compiler_pic -DPIC" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + # The option is referenced via a variable to avoid confusing sed. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:6154: $lt_compile\"" >&5) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&5 + echo "$as_me:6158: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + if test ! -s conftest.err; then + lt_prog_compiler_pic_works=yes + fi + fi + $rm conftest* + +fi +echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works" >&5 +echo "${ECHO_T}$lt_prog_compiler_pic_works" >&6 + +if test x"$lt_prog_compiler_pic_works" = xyes; then + case $lt_prog_compiler_pic in + "" | " "*) ;; + *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;; + esac +else + lt_prog_compiler_pic= + lt_prog_compiler_can_build_shared=no +fi + +fi +case "$host_os" in + # For platforms which do not support PIC, -DPIC is meaningless: + *djgpp*) + lt_prog_compiler_pic= + ;; + *) + lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC" + ;; +esac + +echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 +echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6 +if test "${lt_cv_prog_compiler_c_o+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + lt_cv_prog_compiler_c_o=no + $rm -r conftest 2>/dev/null + mkdir conftest + cd conftest + mkdir out + printf "$lt_simple_compile_test_code" > conftest.$ac_ext + + lt_compiler_flag="-o out/conftest2.$ac_objext" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:6214: $lt_compile\"" >&5) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&5 + echo "$as_me:6218: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + if test ! -s out/conftest.err; then + lt_cv_prog_compiler_c_o=yes + fi + fi + chmod u+w . + $rm conftest* + # SGI C++ compiler will create directory out/ii_files/ for + # template instantiation + test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files + $rm out/* && rmdir out + cd .. + rmdir conftest + $rm conftest* + +fi +echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5 +echo "${ECHO_T}$lt_cv_prog_compiler_c_o" >&6 + + +hard_links="nottested" +if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then + # do not overwrite the value of need_locks provided by the user + echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 +echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6 + hard_links=yes + $rm conftest* + ln conftest.a conftest.b 2>/dev/null && hard_links=no + touch conftest.a + ln conftest.a conftest.b 2>&5 || hard_links=no + ln conftest.a conftest.b 2>/dev/null && hard_links=no + echo "$as_me:$LINENO: result: $hard_links" >&5 +echo "${ECHO_T}$hard_links" >&6 + if test "$hard_links" = no; then + { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 +echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} + need_locks=warn + fi +else + need_locks=no +fi + +echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 +echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6 + + runpath_var= + allow_undefined_flag= + enable_shared_with_static_runtimes=no + archive_cmds= + archive_expsym_cmds= + old_archive_From_new_cmds= + old_archive_from_expsyms_cmds= + export_dynamic_flag_spec= + whole_archive_flag_spec= + thread_safe_flag_spec= + hardcode_libdir_flag_spec= + hardcode_libdir_flag_spec_ld= + hardcode_libdir_separator= + hardcode_direct=no + hardcode_minus_L=no + hardcode_shlibpath_var=unsupported + link_all_deplibs=unknown + hardcode_automatic=no + module_cmds= + module_expsym_cmds= + always_export_symbols=no + export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + # include_expsyms should be a list of space-separated symbols to be *always* + # included in the symbol list + include_expsyms= + # exclude_expsyms can be an extended regexp of symbols to exclude + # it will be wrapped by ` (' and `)$', so one must not match beginning or + # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', + # as well as any symbol that contains `d'. + exclude_expsyms="_GLOBAL_OFFSET_TABLE_" + # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out + # platforms (ab)use it in PIC code, but their linkers get confused if + # the symbol is explicitly referenced. Since portable code cannot + # rely on this symbol name, it's probably fine to never include it in + # preloaded symbol tables. + extract_expsyms_cmds= + + case $host_os in + cygwin* | mingw* | pw32*) + # FIXME: the MSVC++ port hasn't been tested in a loooong time + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + if test "$GCC" != yes; then + with_gnu_ld=no + fi + ;; + openbsd*) + with_gnu_ld=no + ;; + esac + + ld_shlibs=yes + if test "$with_gnu_ld" = yes; then + # If archive_cmds runs LD, not CC, wlarc should be empty + wlarc='${wl}' + + # See if GNU ld supports shared libraries. + case $host_os in + aix3* | aix4* | aix5*) + # On AIX/PPC, the GNU linker is very broken + if test "$host_cpu" != ia64; then + ld_shlibs=no + cat <&2 + +*** Warning: the GNU linker, at least up to release 2.9.1, is reported +*** to be unable to reliably create shared libraries on AIX. +*** Therefore, libtool is disabling shared libraries support. If you +*** really care for shared libraries, you may want to modify your PATH +*** so that a non-GNU linker is found, and then restart. + +EOF + fi + ;; + + amigaos*) + archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + + # Samuel A. Falvo II reports + # that the semantics of dynamic libraries on AmigaOS, at least up + # to version 4, is to share data among multiple programs linked + # with the same dynamic library. Since this doesn't match the + # behavior of shared libraries on other platforms, we can't use + # them. + ld_shlibs=no + ;; + + beos*) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + allow_undefined_flag=unsupported + # Joseph Beckenbach says some releases of gcc + # support --undefined. This deserves some investigation. FIXME + archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + else + ld_shlibs=no + fi + ;; + + cygwin* | mingw* | pw32*) + # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless, + # as there is no search path for DLLs. + hardcode_libdir_flag_spec='-L$libdir' + allow_undefined_flag=unsupported + always_export_symbols=no + enable_shared_with_static_runtimes=yes + export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGS] /s/.* \([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols' + + if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' + # If the export-symbols file already is a .def file (1st line + # is EXPORTS), use it as is; otherwise, prepend... + archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then + cp $export_symbols $output_objdir/$soname.def; + else + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ + $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' + else + ld_shlibs=no + fi + ;; + + netbsd* | knetbsd*-gnu) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' + wlarc= + else + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + fi + ;; + + solaris* | sysv5*) + if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then + ld_shlibs=no + cat <&2 + +*** Warning: The releases 2.8.* of the GNU linker cannot reliably +*** create shared libraries on Solaris systems. Therefore, libtool +*** is disabling shared libraries support. We urge you to upgrade GNU +*** binutils to release 2.9.1 or newer. Another option is to modify +*** your PATH or compiler configuration so that the native linker is +*** used, and then restart. + +EOF + elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs=no + fi + ;; + + sunos4*) + archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' + wlarc= + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + linux*) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + tmp_archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_cmds="$tmp_archive_cmds" + supports_anon_versioning=no + case `$LD -v 2>/dev/null` in + *\ 01.* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 + *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... + *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... + *\ 2.11.*) ;; # other 2.11 versions + *) supports_anon_versioning=yes ;; + esac + if test $supports_anon_versioning = yes; then + archive_expsym_cmds='$echo "{ global:" > $output_objdir/$libname.ver~ +cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ +$echo "local: *; };" >> $output_objdir/$libname.ver~ + $CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' + else + archive_expsym_cmds="$tmp_archive_cmds" + fi + link_all_deplibs=no + else + ld_shlibs=no + fi + ;; + + *) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs=no + fi + ;; + esac + + if test "$ld_shlibs" = yes; then + runpath_var=LD_RUN_PATH + hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir' + export_dynamic_flag_spec='${wl}--export-dynamic' + # ancient GNU ld didn't support --whole-archive et. al. + if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then + whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + else + whole_archive_flag_spec= + fi + fi + else + # PORTME fill in a description of your system's linker (not GNU ld) + case $host_os in + aix3*) + allow_undefined_flag=unsupported + always_export_symbols=yes + archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' + # Note: this linker hardcodes the directories in LIBPATH if there + # are no directories specified by -L. + hardcode_minus_L=yes + if test "$GCC" = yes && test -z "$link_static_flag"; then + # Neither direct hardcoding nor static linking is supported with a + # broken collect2. + hardcode_direct=unsupported + fi + ;; + + aix4* | aix5*) + if test "$host_cpu" = ia64; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. + aix_use_runtimelinking=no + exp_sym_flag='-Bexport' + no_entry_flag="" + else + # If we're using GNU nm, then we don't want the "-C" option. + # -C means demangle to AIX nm, but means don't demangle with GNU nm + if $NM -V 2>&1 | grep 'GNU' > /dev/null; then + export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' + else + export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' + fi + aix_use_runtimelinking=no + + # Test if we are trying to use run time linking or normal + # AIX style linking. If -brtl is somewhere in LDFLAGS, we + # need to do runtime linking. + case $host_os in aix4.[23]|aix4.[23].*|aix5*) + for ld_flag in $LDFLAGS; do + if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then + aix_use_runtimelinking=yes + break + fi + done + esac + + exp_sym_flag='-bexport' + no_entry_flag='-bnoentry' + fi + + # When large executables or shared objects are built, AIX ld can + # have problems creating the table of contents. If linking a library + # or program results in "error TOC overflow" add -mminimal-toc to + # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not + # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. + + archive_cmds='' + hardcode_direct=yes + hardcode_libdir_separator=':' + link_all_deplibs=yes + + if test "$GCC" = yes; then + case $host_os in aix4.012|aix4.012.*) + # We only want to do this on AIX 4.2 and lower, the check + # below for broken collect2 doesn't work under 4.3+ + collect2name=`${CC} -print-prog-name=collect2` + if test -f "$collect2name" && \ + strings "$collect2name" | grep resolve_lib_name >/dev/null + then + # We have reworked collect2 + hardcode_direct=yes + else + # We have old collect2 + hardcode_direct=unsupported + # It fails to find uninstalled libraries when the uninstalled + # path is not listed in the libpath. Setting hardcode_minus_L + # to unsupported forces relinking + hardcode_minus_L=yes + hardcode_libdir_flag_spec='-L$libdir' + hardcode_libdir_separator= + fi + esac + shared_flag='-shared' + else + # not using gcc + if test "$host_cpu" = ia64; then + # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release + # chokes on -Wl,-G. The following line is correct: + shared_flag='-G' + else + if test "$aix_use_runtimelinking" = yes; then + shared_flag='${wl}-G' + else + shared_flag='${wl}-bM:SRE' + fi + fi + fi + + # It seems that -bexpall does not export symbols beginning with + # underscore (_), so it is better to generate a list of symbols to export. + always_export_symbols=yes + if test "$aix_use_runtimelinking" = yes; then + # Warning - without using the other runtime loading flags (-brtl), + # -berok will link without error, but may produce a broken library. + allow_undefined_flag='-berok' + # Determine the default libpath from the value encoded in an empty executable. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + +aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } +}'` +# Check for a 64-bit object if we didn't find anything. +if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } +}'`; fi +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + + hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" + archive_expsym_cmds="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag" + else + if test "$host_cpu" = ia64; then + hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' + allow_undefined_flag="-z nodefs" + archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" + else + # Determine the default libpath from the value encoded in an empty executable. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + +aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } +}'` +# Check for a 64-bit object if we didn't find anything. +if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } +}'`; fi +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + + hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" + # Warning - without using the other run time loading flags, + # -berok will link without error, but may produce a broken library. + no_undefined_flag=' ${wl}-bernotok' + allow_undefined_flag=' ${wl}-berok' + # -bexpall does not export symbols beginning with underscore (_) + always_export_symbols=yes + # Exported symbols can be pulled into shared objects from archives + whole_archive_flag_spec=' ' + archive_cmds_need_lc=yes + # This is similar to how AIX traditionally builds it's shared libraries. + archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + fi + fi + ;; + + amigaos*) + archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + # see comment about different semantics on the GNU ld section + ld_shlibs=no + ;; + + bsdi4*) + export_dynamic_flag_spec=-rdynamic + ;; + + cygwin* | mingw* | pw32*) + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + hardcode_libdir_flag_spec=' ' + allow_undefined_flag=unsupported + # Tell ltmain to make .lib files, not .a files. + libext=lib + # Tell ltmain to make .dll files, not .so files. + shrext_cmds=".dll" + # FIXME: Setting linknames here is a bad hack. + archive_cmds='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames=' + # The linker will automatically build a .lib file if we build a DLL. + old_archive_From_new_cmds='true' + # FIXME: Should let the user specify the lib program. + old_archive_cmds='lib /OUT:$oldlib$oldobjs$old_deplibs' + fix_srcfile_path='`cygpath -w "$srcfile"`' + enable_shared_with_static_runtimes=yes + ;; + + darwin* | rhapsody*) + if test "$GXX" = yes ; then + archive_cmds_need_lc=no + case "$host_os" in + rhapsody* | darwin1.[012]) + allow_undefined_flag='-undefined suppress' + ;; + *) # Darwin 1.3 on + if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then + allow_undefined_flag='-flat_namespace -undefined suppress' + else + case ${MACOSX_DEPLOYMENT_TARGET} in + 10.[012]) + allow_undefined_flag='-flat_namespace -undefined suppress' + ;; + 10.*) + allow_undefined_flag='-undefined dynamic_lookup' + ;; + esac + fi + ;; + esac + lt_int_apple_cc_single_mod=no + output_verbose_link_cmd='echo' + if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then + lt_int_apple_cc_single_mod=yes + fi + if test "X$lt_int_apple_cc_single_mod" = Xyes ; then + archive_cmds='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring' + else + archive_cmds='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring' + fi + module_cmds='$CC ${wl}-bind_at_load $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' + # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's + if test "X$lt_int_apple_cc_single_mod" = Xyes ; then + archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + else + archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + fi + module_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + hardcode_direct=no + hardcode_automatic=yes + hardcode_shlibpath_var=unsupported + whole_archive_flag_spec='-all_load $convenience' + link_all_deplibs=yes + else + ld_shlibs=no + fi + ;; + + dgux*) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_shlibpath_var=no + ;; + + freebsd1*) + ld_shlibs=no + ;; + + # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor + # support. Future versions do this automatically, but an explicit c++rt0.o + # does not break anything, and helps significantly (at the cost of a little + # extra space). + freebsd2.2*) + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + # Unfortunately, older versions of FreeBSD 2 do not have this feature. + freebsd2*) + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=yes + hardcode_minus_L=yes + hardcode_shlibpath_var=no + ;; + + # FreeBSD 3 and greater uses gcc -shared to do shared libraries. + freebsd* | kfreebsd*-gnu) + archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + hpux9*) + if test "$GCC" = yes; then + archive_cmds='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + else + archive_cmds='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + fi + hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' + hardcode_libdir_separator=: + hardcode_direct=yes + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L=yes + export_dynamic_flag_spec='${wl}-E' + ;; + + hpux10* | hpux11*) + if test "$GCC" = yes -a "$with_gnu_ld" = no; then + case "$host_cpu" in + hppa*64*|ia64*) + archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + else + case "$host_cpu" in + hppa*64*|ia64*) + archive_cmds='$LD -b +h $soname -o $lib $libobjs $deplibs $linker_flags' + ;; + *) + archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' + ;; + esac + fi + if test "$with_gnu_ld" = no; then + case "$host_cpu" in + hppa*64*) + hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' + hardcode_libdir_flag_spec_ld='+b $libdir' + hardcode_libdir_separator=: + hardcode_direct=no + hardcode_shlibpath_var=no + ;; + ia64*) + hardcode_libdir_flag_spec='-L$libdir' + hardcode_direct=no + hardcode_shlibpath_var=no + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L=yes + ;; + *) + hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' + hardcode_libdir_separator=: + hardcode_direct=yes + export_dynamic_flag_spec='${wl}-E' + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L=yes + ;; + esac + fi + ;; + + irix5* | irix6* | nonstopux*) + if test "$GCC" = yes; then + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + else + archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + hardcode_libdir_flag_spec_ld='-rpath $libdir' + fi + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator=: + link_all_deplibs=yes + ;; + + netbsd* | knetbsd*-gnu) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out + else + archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF + fi + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + newsos6) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=yes + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator=: + hardcode_shlibpath_var=no + ;; + + openbsd*) + hardcode_direct=yes + hardcode_shlibpath_var=no + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + hardcode_libdir_flag_spec='${wl}-rpath,$libdir' + export_dynamic_flag_spec='${wl}-E' + else + case $host_os in + openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec='-R$libdir' + ;; + *) + archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + hardcode_libdir_flag_spec='${wl}-rpath,$libdir' + ;; + esac + fi + ;; + + os2*) + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + allow_undefined_flag=unsupported + archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' + old_archive_From_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' + ;; + + osf3*) + if test "$GCC" = yes; then + allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' + archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + else + allow_undefined_flag=' -expect_unresolved \*' + archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + fi + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator=: + ;; + + osf4* | osf5*) # as osf3* with the addition of -msym flag + if test "$GCC" = yes; then + allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' + archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + else + allow_undefined_flag=' -expect_unresolved \*' + archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ + $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp' + + # Both c and cxx compiler support -rpath directly + hardcode_libdir_flag_spec='-rpath $libdir' + fi + hardcode_libdir_separator=: + ;; + + sco3.2v5*) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_shlibpath_var=no + export_dynamic_flag_spec='${wl}-Bexport' + runpath_var=LD_RUN_PATH + hardcode_runpath_var=yes + ;; + + solaris*) + no_undefined_flag=' -z text' + if test "$GCC" = yes; then + archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp' + else + archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' + archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' + fi + hardcode_libdir_flag_spec='-R$libdir' + hardcode_shlibpath_var=no + case $host_os in + solaris2.[0-5] | solaris2.[0-5].*) ;; + *) # Supported since Solaris 2.6 (maybe 2.5.1?) + whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ;; + esac + link_all_deplibs=yes + ;; + + sunos4*) + if test "x$host_vendor" = xsequent; then + # Use $CC to link under sequent, because it throws in some extra .o + # files that make .init and .fini sections work. + archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' + fi + hardcode_libdir_flag_spec='-L$libdir' + hardcode_direct=yes + hardcode_minus_L=yes + hardcode_shlibpath_var=no + ;; + + sysv4) + case $host_vendor in + sni) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=yes # is this really true??? + ;; + siemens) + ## LD is ld it makes a PLAMLIB + ## CC just makes a GrossModule. + archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags' + reload_cmds='$CC -r -o $output$reload_objs' + hardcode_direct=no + ;; + motorola) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=no #Motorola manual says yes, but my tests say they lie + ;; + esac + runpath_var='LD_RUN_PATH' + hardcode_shlibpath_var=no + ;; + + sysv4.3*) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_shlibpath_var=no + export_dynamic_flag_spec='-Bexport' + ;; + + sysv4*MP*) + if test -d /usr/nec; then + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_shlibpath_var=no + runpath_var=LD_RUN_PATH + hardcode_runpath_var=yes + ld_shlibs=yes + fi + ;; + + sysv4.2uw2*) + archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=yes + hardcode_minus_L=no + hardcode_shlibpath_var=no + hardcode_runpath_var=yes + runpath_var=LD_RUN_PATH + ;; + + sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[78]* | unixware7*) + no_undefined_flag='${wl}-z ${wl}text' + if test "$GCC" = yes; then + archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + fi + runpath_var='LD_RUN_PATH' + hardcode_shlibpath_var=no + ;; + + sysv5*) + no_undefined_flag=' -z text' + # $CC -shared without GNU ld will not create a library from C++ + # object files and a static libstdc++, better avoid it by now + archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' + archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' + hardcode_libdir_flag_spec= + hardcode_shlibpath_var=no + runpath_var='LD_RUN_PATH' + ;; + + uts4*) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_shlibpath_var=no + ;; + + *) + ld_shlibs=no + ;; + esac + fi + +echo "$as_me:$LINENO: result: $ld_shlibs" >&5 +echo "${ECHO_T}$ld_shlibs" >&6 +test "$ld_shlibs" = no && can_build_shared=no + +variables_saved_for_relink="PATH $shlibpath_var $runpath_var" +if test "$GCC" = yes; then + variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" +fi + +# +# Do we need to explicitly link libc? +# +case "x$archive_cmds_need_lc" in +x|xyes) + # Assume -lc should be added + archive_cmds_need_lc=yes + + if test "$enable_shared" = yes && test "$GCC" = yes; then + case $archive_cmds in + *'~'*) + # FIXME: we may have to deal with multi-command sequences. + ;; + '$CC '*) + # Test whether the compiler implicitly links with -lc since on some + # systems, -lgcc has to come before -lc. If gcc already passes -lc + # to ld, don't add -lc before -lgcc. + echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 +echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6 + $rm conftest* + printf "$lt_simple_compile_test_code" > conftest.$ac_ext + + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } 2>conftest.err; then + soname=conftest + lib=conftest + libobjs=conftest.$ac_objext + deplibs= + wl=$lt_prog_compiler_wl + compiler_flags=-v + linker_flags=-v + verstring= + output_objdir=. + libname=conftest + lt_save_allow_undefined_flag=$allow_undefined_flag + allow_undefined_flag= + if { (eval echo "$as_me:$LINENO: \"$archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5 + (eval $archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } + then + archive_cmds_need_lc=no + else + archive_cmds_need_lc=yes + fi + allow_undefined_flag=$lt_save_allow_undefined_flag + else + cat conftest.err 1>&5 + fi + $rm conftest* + echo "$as_me:$LINENO: result: $archive_cmds_need_lc" >&5 +echo "${ECHO_T}$archive_cmds_need_lc" >&6 + ;; + esac + fi + ;; +esac + +echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 +echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6 +library_names_spec= +libname_spec='lib$name' +soname_spec= +shrext_cmds=".so" +postinstall_cmds= +postuninstall_cmds= +finish_cmds= +finish_eval= +shlibpath_var= +shlibpath_overrides_runpath=unknown +version_type=none +dynamic_linker="$host_os ld.so" +sys_lib_dlsearch_path_spec="/lib /usr/lib" +if test "$GCC" = yes; then + sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` + if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then + # if the path contains ";" then we assume it to be the separator + # otherwise default to the standard path separator (i.e. ":") - it is + # assumed that no part of a normal pathname contains ";" but that should + # okay in the real world where ";" in dirpaths is itself problematic. + sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` + else + sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + fi +else + sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" +fi +need_lib_prefix=unknown +hardcode_into_libs=no + +# when you set need_version to no, make sure it does not cause -set_version +# flags to be left without arguments +need_version=unknown + +case $host_os in +aix3*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' + shlibpath_var=LIBPATH + + # AIX 3 has no versioning support, so we append a major version to the name. + soname_spec='${libname}${release}${shared_ext}$major' + ;; + +aix4* | aix5*) + version_type=linux + need_lib_prefix=no + need_version=no + hardcode_into_libs=yes + if test "$host_cpu" = ia64; then + # AIX 5 supports IA64 + library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + else + # With GCC up to 2.95.x, collect2 would create an import file + # for dependence libraries. The import file would start with + # the line `#! .'. This would cause the generated library to + # depend on `.', always an invalid library. This was fixed in + # development snapshots of GCC prior to 3.0. + case $host_os in + aix4 | aix4.[01] | aix4.[01].*) + if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' + echo ' yes ' + echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then + : + else + can_build_shared=no + fi + ;; + esac + # AIX (on Power*) has no versioning support, so currently we can not hardcode correct + # soname into executable. Probably we can add versioning support to + # collect2, so additional links can be useful in future. + if test "$aix_use_runtimelinking" = yes; then + # If using run time linking (on AIX 4.2 or later) use lib.so + # instead of lib.a to let people know that these are not + # typical AIX shared libraries. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + else + # We preserve .a as extension for shared libraries through AIX4.2 + # and later when we are not doing run time linking. + library_names_spec='${libname}${release}.a $libname.a' + soname_spec='${libname}${release}${shared_ext}$major' + fi + shlibpath_var=LIBPATH + fi + ;; + +amigaos*) + library_names_spec='$libname.ixlibrary $libname.a' + # Create ${libname}_ixlibrary.a entries in /sys/libs. + finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' + ;; + +beos*) + library_names_spec='${libname}${shared_ext}' + dynamic_linker="$host_os ld.so" + shlibpath_var=LIBRARY_PATH + ;; + +bsdi4*) + version_type=linux + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" + sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" + # the default ld.so.conf also contains /usr/contrib/lib and + # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow + # libtool to hard-code these into programs + ;; + +cygwin* | mingw* | pw32*) + version_type=windows + shrext_cmds=".dll" + need_version=no + need_lib_prefix=no + + case $GCC,$host_os in + yes,cygwin* | yes,mingw* | yes,pw32*) + library_names_spec='$libname.dll.a' + # DLL is installed to $(libdir)/../bin by postinstall_cmds + postinstall_cmds='base_file=`basename \${file}`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $rm \$dlpath' + shlibpath_overrides_runpath=yes + + case $host_os in + cygwin*) + # Cygwin DLLs use 'cyg' prefix rather than 'lib' + soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" + ;; + mingw*) + # MinGW DLLs use traditional 'lib' prefix + soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` + if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then + # It is most probably a Windows format PATH printed by + # mingw gcc, but we are running on Cygwin. Gcc prints its search + # path with ; separators, and with drive letters. We can handle the + # drive letters (cygwin fileutils understands them), so leave them, + # especially as we might pass files found there to a mingw objdump, + # which wouldn't understand a cygwinified path. Ahh. + sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` + else + sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + fi + ;; + pw32*) + # pw32 DLLs use 'pw' prefix rather than 'lib' + library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/./-/g'`${versuffix}${shared_ext}' + ;; + esac + ;; + + *) + library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' + ;; + esac + dynamic_linker='Win32 ld.exe' + # FIXME: first we should search . and the directory the executable is in + shlibpath_var=PATH + ;; + +darwin* | rhapsody*) + dynamic_linker="$host_os dyld" + version_type=darwin + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext' + soname_spec='${libname}${release}${major}$shared_ext' + shlibpath_overrides_runpath=yes + shlibpath_var=DYLD_LIBRARY_PATH + shrext_cmds='$(test .$module = .yes && echo .so || echo .dylib)' + # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same. + if test "$GCC" = yes; then + sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"` + else + sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib' + fi + sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' + ;; + +dgux*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +freebsd1*) + dynamic_linker=no + ;; + +kfreebsd*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='GNU ld.so' + ;; + +freebsd*) + objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout` + version_type=freebsd-$objformat + case $version_type in + freebsd-elf*) + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' + need_version=no + need_lib_prefix=no + ;; + freebsd-*) + library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' + need_version=yes + ;; + esac + shlibpath_var=LD_LIBRARY_PATH + case $host_os in + freebsd2*) + shlibpath_overrides_runpath=yes + ;; + freebsd3.01* | freebsdelf3.01*) + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + *) # from 3.2 on + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + esac + ;; + +gnu*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + hardcode_into_libs=yes + ;; + +hpux9* | hpux10* | hpux11*) + # Give a soname corresponding to the major version so that dld.sl refuses to + # link against other versions. + version_type=sunos + need_lib_prefix=no + need_version=no + case "$host_cpu" in + ia64*) + shrext_cmds='.so' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.so" + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + if test "X$HPUX_IA64_MODE" = X32; then + sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" + else + sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" + fi + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + hppa*64*) + shrext_cmds='.sl' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.sl" + shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + *) + shrext_cmds='.sl' + dynamic_linker="$host_os dld.sl" + shlibpath_var=SHLIB_PATH + shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + ;; + esac + # HP-UX runs *really* slowly unless shared libraries are mode 555. + postinstall_cmds='chmod 555 $lib' + ;; + +irix5* | irix6* | nonstopux*) + case $host_os in + nonstopux*) version_type=nonstopux ;; + *) + if test "$lt_cv_prog_gnu_ld" = yes; then + version_type=linux + else + version_type=irix + fi ;; + esac + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' + case $host_os in + irix5* | nonstopux*) + libsuff= shlibsuff= + ;; + *) + case $LD in # libtool.m4 will add one of these switches to LD + *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") + libsuff= shlibsuff= libmagic=32-bit;; + *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") + libsuff=32 shlibsuff=N32 libmagic=N32;; + *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") + libsuff=64 shlibsuff=64 libmagic=64-bit;; + *) libsuff= shlibsuff= libmagic=never-match;; + esac + ;; + esac + shlibpath_var=LD_LIBRARY${shlibsuff}_PATH + shlibpath_overrides_runpath=no + sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" + sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" + hardcode_into_libs=yes + ;; + +# No shared lib support for Linux oldld, aout, or coff. +linux*oldld* | linux*aout* | linux*coff*) + dynamic_linker=no + ;; + +# This must be Linux ELF. +linux*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + # This implies no fast_install, which is unacceptable. + # Some rework will be needed to allow for fast_install + # before this can be enabled. + hardcode_into_libs=yes + + # Append ld.so.conf contents to the search path + if test -f /etc/ld.so.conf; then + lt_ld_extra=`$SED -e 's/:,\t/ /g;s/=^=*$//;s/=^= * / /g' /etc/ld.so.conf | tr '\n' ' '` + sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" + fi + + # We used to test for /lib/ld.so.1 and disable shared libraries on + # powerpc, because MkLinux only supported shared libraries with the + # GNU dynamic linker. Since this was broken with cross compilers, + # most powerpc-linux boxes support dynamic linking these days and + # people can always --disable-shared, the test was removed, and we + # assume the GNU/Linux dynamic linker is in use. + dynamic_linker='GNU/Linux ld.so' + ;; + +knetbsd*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='GNU ld.so' + ;; + +netbsd*) + version_type=sunos + need_lib_prefix=no + need_version=no + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + dynamic_linker='NetBSD (a.out) ld.so' + else + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + dynamic_linker='NetBSD ld.elf_so' + fi + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + +newsos6) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + ;; + +nto-qnx*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + ;; + +openbsd*) + version_type=sunos + need_lib_prefix=no + need_version=yes + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + shlibpath_var=LD_LIBRARY_PATH + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + case $host_os in + openbsd2.[89] | openbsd2.[89].*) + shlibpath_overrides_runpath=no + ;; + *) + shlibpath_overrides_runpath=yes + ;; + esac + else + shlibpath_overrides_runpath=yes + fi + ;; + +os2*) + libname_spec='$name' + shrext_cmds=".dll" + need_lib_prefix=no + library_names_spec='$libname${shared_ext} $libname.a' + dynamic_linker='OS/2 ld.exe' + shlibpath_var=LIBPATH + ;; + +osf3* | osf4* | osf5*) + version_type=osf + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" + sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" + ;; + +sco3.2v5*) + version_type=osf + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + ;; + +solaris*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + # ldd complains unless libraries are executable + postinstall_cmds='chmod +x $lib' + ;; + +sunos4*) + version_type=sunos + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + if test "$with_gnu_ld" = yes; then + need_lib_prefix=no + fi + need_version=yes + ;; + +sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + case $host_vendor in + sni) + shlibpath_overrides_runpath=no + need_lib_prefix=no + export_dynamic_flag_spec='${wl}-Blargedynsym' + runpath_var=LD_RUN_PATH + ;; + siemens) + need_lib_prefix=no + ;; + motorola) + need_lib_prefix=no + need_version=no + shlibpath_overrides_runpath=no + sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' + ;; + esac + ;; + +sysv4*MP*) + if test -d /usr/nec ;then + version_type=linux + library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' + soname_spec='$libname${shared_ext}.$major' + shlibpath_var=LD_LIBRARY_PATH + fi + ;; + +uts4*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +*) + dynamic_linker=no + ;; +esac +echo "$as_me:$LINENO: result: $dynamic_linker" >&5 +echo "${ECHO_T}$dynamic_linker" >&6 +test "$dynamic_linker" = no && can_build_shared=no + +echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 +echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6 +hardcode_action= +if test -n "$hardcode_libdir_flag_spec" || \ + test -n "$runpath_var " || \ + test "X$hardcode_automatic"="Xyes" ; then + + # We can hardcode non-existant directories. + if test "$hardcode_direct" != no && + # If the only mechanism to avoid hardcoding is shlibpath_var, we + # have to relink, otherwise we might link with an installed library + # when we should be linking with a yet-to-be-installed one + ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, )" != no && + test "$hardcode_minus_L" != no; then + # Linking always hardcodes the temporary library directory. + hardcode_action=relink + else + # We can link without hardcoding, and we can hardcode nonexisting dirs. + hardcode_action=immediate + fi +else + # We cannot hardcode anything, or else we can only hardcode existing + # directories. + hardcode_action=unsupported +fi +echo "$as_me:$LINENO: result: $hardcode_action" >&5 +echo "${ECHO_T}$hardcode_action" >&6 + +if test "$hardcode_action" = relink; then + # Fast installation is not supported + enable_fast_install=no +elif test "$shlibpath_overrides_runpath" = yes || + test "$enable_shared" = no; then + # Fast installation is not necessary + enable_fast_install=needless +fi + +striplib= +old_striplib= +echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5 +echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6 +if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then + test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" + test -z "$striplib" && striplib="$STRIP --strip-unneeded" + echo "$as_me:$LINENO: result: yes" >&5 +echo "${ECHO_T}yes" >&6 +else +# FIXME - insert some real tests, host_os isn't really good enough + case $host_os in + darwin*) + if test -n "$STRIP" ; then + striplib="$STRIP -x" + echo "$as_me:$LINENO: result: yes" >&5 +echo "${ECHO_T}yes" >&6 + else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + ;; + *) + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 + ;; + esac +fi + +if test "x$enable_dlopen" != xyes; then + enable_dlopen=unknown + enable_dlopen_self=unknown + enable_dlopen_self_static=unknown +else + lt_cv_dlopen=no + lt_cv_dlopen_libs= + + case $host_os in + beos*) + lt_cv_dlopen="load_add_on" + lt_cv_dlopen_libs= + lt_cv_dlopen_self=yes + ;; + + mingw* | pw32*) + lt_cv_dlopen="LoadLibrary" + lt_cv_dlopen_libs= + ;; + + cygwin*) + lt_cv_dlopen="dlopen" + lt_cv_dlopen_libs= + ;; + + darwin*) + # if libdl is installed we need to link against it + echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 +echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6 +if test "${ac_cv_lib_dl_dlopen+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldl $LIBS" +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char dlopen (); +int +main () +{ +dlopen (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_lib_dl_dlopen=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_lib_dl_dlopen=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 +echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6 +if test $ac_cv_lib_dl_dlopen = yes; then + lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" +else + + lt_cv_dlopen="dyld" + lt_cv_dlopen_libs= + lt_cv_dlopen_self=yes + +fi + + ;; + + *) + echo "$as_me:$LINENO: checking for shl_load" >&5 +echo $ECHO_N "checking for shl_load... $ECHO_C" >&6 +if test "${ac_cv_func_shl_load+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* Define shl_load to an innocuous variant, in case declares shl_load. + For example, HP-UX 11i declares gettimeofday. */ +#define shl_load innocuous_shl_load + +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char shl_load (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ + +#ifdef __STDC__ +# include +#else +# include +#endif + +#undef shl_load + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +{ +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char shl_load (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined (__stub_shl_load) || defined (__stub___shl_load) +choke me +#else +char (*f) () = shl_load; +#endif +#ifdef __cplusplus +} +#endif + +int +main () +{ +return f != shl_load; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_func_shl_load=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_func_shl_load=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5 +echo "${ECHO_T}$ac_cv_func_shl_load" >&6 +if test $ac_cv_func_shl_load = yes; then + lt_cv_dlopen="shl_load" +else + echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5 +echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6 +if test "${ac_cv_lib_dld_shl_load+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldld $LIBS" +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char shl_load (); +int +main () +{ +shl_load (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_lib_dld_shl_load=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_lib_dld_shl_load=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5 +echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6 +if test $ac_cv_lib_dld_shl_load = yes; then + lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld" +else + echo "$as_me:$LINENO: checking for dlopen" >&5 +echo $ECHO_N "checking for dlopen... $ECHO_C" >&6 +if test "${ac_cv_func_dlopen+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* Define dlopen to an innocuous variant, in case declares dlopen. + For example, HP-UX 11i declares gettimeofday. */ +#define dlopen innocuous_dlopen + +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char dlopen (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ + +#ifdef __STDC__ +# include +#else +# include +#endif + +#undef dlopen + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +{ +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char dlopen (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined (__stub_dlopen) || defined (__stub___dlopen) +choke me +#else +char (*f) () = dlopen; +#endif +#ifdef __cplusplus +} +#endif + +int +main () +{ +return f != dlopen; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_func_dlopen=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_func_dlopen=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5 +echo "${ECHO_T}$ac_cv_func_dlopen" >&6 +if test $ac_cv_func_dlopen = yes; then + lt_cv_dlopen="dlopen" +else + echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 +echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6 +if test "${ac_cv_lib_dl_dlopen+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldl $LIBS" +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char dlopen (); +int +main () +{ +dlopen (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_lib_dl_dlopen=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_lib_dl_dlopen=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 +echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6 +if test $ac_cv_lib_dl_dlopen = yes; then + lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" +else + echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5 +echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6 +if test "${ac_cv_lib_svld_dlopen+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lsvld $LIBS" +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char dlopen (); +int +main () +{ +dlopen (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_lib_svld_dlopen=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_lib_svld_dlopen=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5 +echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6 +if test $ac_cv_lib_svld_dlopen = yes; then + lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld" +else + echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5 +echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6 +if test "${ac_cv_lib_dld_dld_link+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldld $LIBS" +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char dld_link (); +int +main () +{ +dld_link (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_lib_dld_dld_link=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_lib_dld_dld_link=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5 +echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6 +if test $ac_cv_lib_dld_dld_link = yes; then + lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld" +fi + + +fi + + +fi + + +fi + + +fi + + +fi + + ;; + esac + + if test "x$lt_cv_dlopen" != xno; then + enable_dlopen=yes + else + enable_dlopen=no + fi + + case $lt_cv_dlopen in + dlopen) + save_CPPFLAGS="$CPPFLAGS" + test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" + + save_LDFLAGS="$LDFLAGS" + eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" + + save_LIBS="$LIBS" + LIBS="$lt_cv_dlopen_libs $LIBS" + + echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5 +echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6 +if test "${lt_cv_dlopen_self+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test "$cross_compiling" = yes; then : + lt_cv_dlopen_self=cross +else + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 + lt_status=$lt_dlunknown + cat > conftest.$ac_ext < +#endif + +#include + +#ifdef RTLD_GLOBAL +# define LT_DLGLOBAL RTLD_GLOBAL +#else +# ifdef DL_GLOBAL +# define LT_DLGLOBAL DL_GLOBAL +# else +# define LT_DLGLOBAL 0 +# endif +#endif + +/* We may have to define LT_DLLAZY_OR_NOW in the command line if we + find out it does not work in some platform. */ +#ifndef LT_DLLAZY_OR_NOW +# ifdef RTLD_LAZY +# define LT_DLLAZY_OR_NOW RTLD_LAZY +# else +# ifdef DL_LAZY +# define LT_DLLAZY_OR_NOW DL_LAZY +# else +# ifdef RTLD_NOW +# define LT_DLLAZY_OR_NOW RTLD_NOW +# else +# ifdef DL_NOW +# define LT_DLLAZY_OR_NOW DL_NOW +# else +# define LT_DLLAZY_OR_NOW 0 +# endif +# endif +# endif +# endif +#endif + +#ifdef __cplusplus +extern "C" void exit (int); +#endif + +void fnord() { int i=42;} +int main () +{ + void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); + int status = $lt_dlunknown; + + if (self) + { + if (dlsym (self,"fnord")) status = $lt_dlno_uscore; + else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; + /* dlclose (self); */ + } + + exit (status); +} +EOF + if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then + (./conftest; exit; ) 2>/dev/null + lt_status=$? + case x$lt_status in + x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;; + x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;; + x$lt_unknown|x*) lt_cv_dlopen_self=no ;; + esac + else : + # compilation failed + lt_cv_dlopen_self=no + fi +fi +rm -fr conftest* + + +fi +echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5 +echo "${ECHO_T}$lt_cv_dlopen_self" >&6 + + if test "x$lt_cv_dlopen_self" = xyes; then + LDFLAGS="$LDFLAGS $link_static_flag" + echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5 +echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6 +if test "${lt_cv_dlopen_self_static+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test "$cross_compiling" = yes; then : + lt_cv_dlopen_self_static=cross +else + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 + lt_status=$lt_dlunknown + cat > conftest.$ac_ext < +#endif + +#include + +#ifdef RTLD_GLOBAL +# define LT_DLGLOBAL RTLD_GLOBAL +#else +# ifdef DL_GLOBAL +# define LT_DLGLOBAL DL_GLOBAL +# else +# define LT_DLGLOBAL 0 +# endif +#endif + +/* We may have to define LT_DLLAZY_OR_NOW in the command line if we + find out it does not work in some platform. */ +#ifndef LT_DLLAZY_OR_NOW +# ifdef RTLD_LAZY +# define LT_DLLAZY_OR_NOW RTLD_LAZY +# else +# ifdef DL_LAZY +# define LT_DLLAZY_OR_NOW DL_LAZY +# else +# ifdef RTLD_NOW +# define LT_DLLAZY_OR_NOW RTLD_NOW +# else +# ifdef DL_NOW +# define LT_DLLAZY_OR_NOW DL_NOW +# else +# define LT_DLLAZY_OR_NOW 0 +# endif +# endif +# endif +# endif +#endif + +#ifdef __cplusplus +extern "C" void exit (int); +#endif + +void fnord() { int i=42;} +int main () +{ + void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); + int status = $lt_dlunknown; + + if (self) + { + if (dlsym (self,"fnord")) status = $lt_dlno_uscore; + else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; + /* dlclose (self); */ + } + + exit (status); +} +EOF + if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then + (./conftest; exit; ) 2>/dev/null + lt_status=$? + case x$lt_status in + x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;; + x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;; + x$lt_unknown|x*) lt_cv_dlopen_self_static=no ;; + esac + else : + # compilation failed + lt_cv_dlopen_self_static=no + fi +fi +rm -fr conftest* + + +fi +echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5 +echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6 + fi + + CPPFLAGS="$save_CPPFLAGS" + LDFLAGS="$save_LDFLAGS" + LIBS="$save_LIBS" + ;; + esac + + case $lt_cv_dlopen_self in + yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; + *) enable_dlopen_self=unknown ;; + esac + + case $lt_cv_dlopen_self_static in + yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; + *) enable_dlopen_self_static=unknown ;; + esac +fi + + +# Report which librarie types wil actually be built +echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5 +echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6 +echo "$as_me:$LINENO: result: $can_build_shared" >&5 +echo "${ECHO_T}$can_build_shared" >&6 + +echo "$as_me:$LINENO: checking whether to build shared libraries" >&5 +echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6 +test "$can_build_shared" = "no" && enable_shared=no + +# On AIX, shared libraries and static libraries use the same namespace, and +# are all built from PIC. +case "$host_os" in +aix3*) + test "$enable_shared" = yes && enable_static=no + if test -n "$RANLIB"; then + archive_cmds="$archive_cmds~\$RANLIB \$lib" + postinstall_cmds='$RANLIB $lib' + fi + ;; + +aix4* | aix5*) + if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then + test "$enable_shared" = yes && enable_static=no + fi + ;; + darwin* | rhapsody*) + if test "$GCC" = yes; then + archive_cmds_need_lc=no + case "$host_os" in + rhapsody* | darwin1.[012]) + allow_undefined_flag='-undefined suppress' + ;; + *) # Darwin 1.3 on + if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then + allow_undefined_flag='-flat_namespace -undefined suppress' + else + case ${MACOSX_DEPLOYMENT_TARGET} in + 10.[012]) + allow_undefined_flag='-flat_namespace -undefined suppress' + ;; + 10.*) + allow_undefined_flag='-undefined dynamic_lookup' + ;; + esac + fi + ;; + esac + output_verbose_link_cmd='echo' + archive_cmds='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags -install_name $rpath/$soname $verstring' + module_cmds='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' + # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's + archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + module_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + hardcode_direct=no + hardcode_automatic=yes + hardcode_shlibpath_var=unsupported + whole_archive_flag_spec='-all_load $convenience' + link_all_deplibs=yes + else + ld_shlibs=no + fi + ;; +esac +echo "$as_me:$LINENO: result: $enable_shared" >&5 +echo "${ECHO_T}$enable_shared" >&6 + +echo "$as_me:$LINENO: checking whether to build static libraries" >&5 +echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6 +# Make sure either enable_shared or enable_static is yes. +test "$enable_shared" = yes || enable_static=yes +echo "$as_me:$LINENO: result: $enable_static" >&5 +echo "${ECHO_T}$enable_static" >&6 + +# The else clause should only fire when bootstrapping the +# libtool distribution, otherwise you forgot to ship ltmain.sh +# with your package, and you will get complaints that there are +# no rules to generate ltmain.sh. +if test -f "$ltmain"; then + # See if we are running on zsh, and set the options which allow our commands through + # without removal of \ escapes. + if test -n "${ZSH_VERSION+set}" ; then + setopt NO_GLOB_SUBST + fi + # Now quote all the things that may contain metacharacters while being + # careful not to overquote the AC_SUBSTed values. We take copies of the + # variables and quote the copies for generation of the libtool script. + for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC NM \ + SED SHELL STRIP \ + libname_spec library_names_spec soname_spec extract_expsyms_cmds \ + old_striplib striplib file_magic_cmd finish_cmds finish_eval \ + deplibs_check_method reload_flag reload_cmds need_locks \ + lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \ + lt_cv_sys_global_symbol_to_c_name_address \ + sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ + old_postinstall_cmds old_postuninstall_cmds \ + compiler \ + CC \ + LD \ + lt_prog_compiler_wl \ + lt_prog_compiler_pic \ + lt_prog_compiler_static \ + lt_prog_compiler_no_builtin_flag \ + export_dynamic_flag_spec \ + thread_safe_flag_spec \ + whole_archive_flag_spec \ + enable_shared_with_static_runtimes \ + old_archive_cmds \ + old_archive_from_new_cmds \ + predep_objects \ + postdep_objects \ + predeps \ + postdeps \ + compiler_lib_search_path \ + archive_cmds \ + archive_expsym_cmds \ + postinstall_cmds \ + postuninstall_cmds \ + old_archive_from_expsyms_cmds \ + allow_undefined_flag \ + no_undefined_flag \ + export_symbols_cmds \ + hardcode_libdir_flag_spec \ + hardcode_libdir_flag_spec_ld \ + hardcode_libdir_separator \ + hardcode_automatic \ + module_cmds \ + module_expsym_cmds \ + lt_cv_prog_compiler_c_o \ + exclude_expsyms \ + include_expsyms; do + + case $var in + old_archive_cmds | \ + old_archive_from_new_cmds | \ + archive_cmds | \ + archive_expsym_cmds | \ + module_cmds | \ + module_expsym_cmds | \ + old_archive_from_expsyms_cmds | \ + export_symbols_cmds | \ + extract_expsyms_cmds | reload_cmds | finish_cmds | \ + postinstall_cmds | postuninstall_cmds | \ + old_postinstall_cmds | old_postuninstall_cmds | \ + sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) + # Double-quote double-evaled strings. + eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" + ;; + *) + eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" + ;; + esac + done + + case $lt_echo in + *'\$0 --fallback-echo"') + lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'` + ;; + esac + +cfgfile="${ofile}T" + trap "$rm \"$cfgfile\"; exit 1" 1 2 15 + $rm -f "$cfgfile" + { echo "$as_me:$LINENO: creating $ofile" >&5 +echo "$as_me: creating $ofile" >&6;} + + cat <<__EOF__ >> "$cfgfile" +#! $SHELL + +# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services. +# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP) +# NOTE: Changes made to this file will be lost: look at ltmain.sh. +# +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001 +# Free Software Foundation, Inc. +# +# This file is part of GNU Libtool: +# Originally by Gordon Matzigkeit , 1996 +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# A sed program that does not truncate output. +SED=$lt_SED + +# Sed that helps us avoid accidentally triggering echo(1) options like -n. +Xsed="$SED -e s/^X//" + +# The HP-UX ksh and POSIX shell print the target directory to stdout +# if CDPATH is set. +if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi + +# The names of the tagged configurations supported by this script. +available_tags= + +# ### BEGIN LIBTOOL CONFIG + +# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: + +# Shell to use when invoking shell scripts. +SHELL=$lt_SHELL + +# Whether or not to build shared libraries. +build_libtool_libs=$enable_shared + +# Whether or not to build static libraries. +build_old_libs=$enable_static + +# Whether or not to add -lc for building shared libraries. +build_libtool_need_lc=$archive_cmds_need_lc + +# Whether or not to disallow shared libs when runtime libs are static +allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes + +# Whether or not to optimize for fast installation. +fast_install=$enable_fast_install + +# The host system. +host_alias=$host_alias +host=$host + +# An echo program that does not interpret backslashes. +echo=$lt_echo + +# The archiver. +AR=$lt_AR +AR_FLAGS=$lt_AR_FLAGS + +# A C compiler. +LTCC=$lt_LTCC + +# A language-specific compiler. +CC=$lt_compiler + +# Is the compiler the GNU C compiler? +with_gcc=$GCC + +# An ERE matcher. +EGREP=$lt_EGREP + +# The linker used to build libraries. +LD=$lt_LD + +# Whether we need hard or soft links. +LN_S=$lt_LN_S + +# A BSD-compatible nm program. +NM=$lt_NM + +# A symbol stripping program +STRIP=$lt_STRIP + +# Used to examine libraries when file_magic_cmd begins "file" +MAGIC_CMD=$MAGIC_CMD + +# Used on cygwin: DLL creation program. +DLLTOOL="$DLLTOOL" + +# Used on cygwin: object dumper. +OBJDUMP="$OBJDUMP" + +# Used on cygwin: assembler. +AS="$AS" + +# The name of the directory that contains temporary libtool files. +objdir=$objdir + +# How to create reloadable object files. +reload_flag=$lt_reload_flag +reload_cmds=$lt_reload_cmds + +# How to pass a linker flag through the compiler. +wl=$lt_lt_prog_compiler_wl + +# Object file suffix (normally "o"). +objext="$ac_objext" + +# Old archive suffix (normally "a"). +libext="$libext" + +# Shared library suffix (normally ".so"). +shrext_cmds='$shrext_cmds' + +# Executable file suffix (normally ""). +exeext="$exeext" + +# Additional compiler flags for building library objects. +pic_flag=$lt_lt_prog_compiler_pic +pic_mode=$pic_mode + +# What is the maximum length of a command? +max_cmd_len=$lt_cv_sys_max_cmd_len + +# Does compiler simultaneously support -c and -o options? +compiler_c_o=$lt_lt_cv_prog_compiler_c_o + +# Must we lock files when doing compilation ? +need_locks=$lt_need_locks + +# Do we need the lib prefix for modules? +need_lib_prefix=$need_lib_prefix + +# Do we need a version for libraries? +need_version=$need_version + +# Whether dlopen is supported. +dlopen_support=$enable_dlopen + +# Whether dlopen of programs is supported. +dlopen_self=$enable_dlopen_self + +# Whether dlopen of statically linked programs is supported. +dlopen_self_static=$enable_dlopen_self_static + +# Compiler flag to prevent dynamic linking. +link_static_flag=$lt_lt_prog_compiler_static + +# Compiler flag to turn off builtin functions. +no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag + +# Compiler flag to allow reflexive dlopens. +export_dynamic_flag_spec=$lt_export_dynamic_flag_spec + +# Compiler flag to generate shared objects directly from archives. +whole_archive_flag_spec=$lt_whole_archive_flag_spec + +# Compiler flag to generate thread-safe objects. +thread_safe_flag_spec=$lt_thread_safe_flag_spec + +# Library versioning type. +version_type=$version_type + +# Format of library name prefix. +libname_spec=$lt_libname_spec + +# List of archive names. First name is the real one, the rest are links. +# The last name is the one that the linker finds with -lNAME. +library_names_spec=$lt_library_names_spec + +# The coded name of the library, if different from the real name. +soname_spec=$lt_soname_spec + +# Commands used to build and install an old-style archive. +RANLIB=$lt_RANLIB +old_archive_cmds=$lt_old_archive_cmds +old_postinstall_cmds=$lt_old_postinstall_cmds +old_postuninstall_cmds=$lt_old_postuninstall_cmds + +# Create an old-style archive from a shared archive. +old_archive_from_new_cmds=$lt_old_archive_from_new_cmds + +# Create a temporary old-style archive to link instead of a shared archive. +old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds + +# Commands used to build and install a shared archive. +archive_cmds=$lt_archive_cmds +archive_expsym_cmds=$lt_archive_expsym_cmds +postinstall_cmds=$lt_postinstall_cmds +postuninstall_cmds=$lt_postuninstall_cmds + +# Commands used to build a loadable module (assumed same as above if empty) +module_cmds=$lt_module_cmds +module_expsym_cmds=$lt_module_expsym_cmds + +# Commands to strip libraries. +old_striplib=$lt_old_striplib +striplib=$lt_striplib + +# Dependencies to place before the objects being linked to create a +# shared library. +predep_objects=$lt_predep_objects + +# Dependencies to place after the objects being linked to create a +# shared library. +postdep_objects=$lt_postdep_objects + +# Dependencies to place before the objects being linked to create a +# shared library. +predeps=$lt_predeps + +# Dependencies to place after the objects being linked to create a +# shared library. +postdeps=$lt_postdeps + +# The library search path used internally by the compiler when linking +# a shared library. +compiler_lib_search_path=$lt_compiler_lib_search_path + +# Method to check whether dependent libraries are shared objects. +deplibs_check_method=$lt_deplibs_check_method + +# Command to use when deplibs_check_method == file_magic. +file_magic_cmd=$lt_file_magic_cmd + +# Flag that allows shared libraries with undefined symbols to be built. +allow_undefined_flag=$lt_allow_undefined_flag + +# Flag that forces no undefined symbols. +no_undefined_flag=$lt_no_undefined_flag + +# Commands used to finish a libtool library installation in a directory. +finish_cmds=$lt_finish_cmds + +# Same as above, but a single script fragment to be evaled but not shown. +finish_eval=$lt_finish_eval + +# Take the output of nm and produce a listing of raw symbols and C names. +global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe + +# Transform the output of nm in a proper C declaration +global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl + +# Transform the output of nm in a C name address pair +global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address + +# This is the shared library runtime path variable. +runpath_var=$runpath_var + +# This is the shared library path variable. +shlibpath_var=$shlibpath_var + +# Is shlibpath searched before the hard-coded library search path? +shlibpath_overrides_runpath=$shlibpath_overrides_runpath + +# How to hardcode a shared library path into an executable. +hardcode_action=$hardcode_action + +# Whether we should hardcode library paths into libraries. +hardcode_into_libs=$hardcode_into_libs + +# Flag to hardcode \$libdir into a binary during linking. +# This must work even if \$libdir does not exist. +hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec + +# If ld is used when linking, flag to hardcode \$libdir into +# a binary during linking. This must work even if \$libdir does +# not exist. +hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld + +# Whether we need a single -rpath flag with a separated argument. +hardcode_libdir_separator=$lt_hardcode_libdir_separator + +# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the +# resulting binary. +hardcode_direct=$hardcode_direct + +# Set to yes if using the -LDIR flag during linking hardcodes DIR into the +# resulting binary. +hardcode_minus_L=$hardcode_minus_L + +# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into +# the resulting binary. +hardcode_shlibpath_var=$hardcode_shlibpath_var + +# Set to yes if building a shared library automatically hardcodes DIR into the library +# and all subsequent libraries and executables linked against it. +hardcode_automatic=$hardcode_automatic + +# Variables whose values should be saved in libtool wrapper scripts and +# restored at relink time. +variables_saved_for_relink="$variables_saved_for_relink" + +# Whether libtool must link a program against all its dependency libraries. +link_all_deplibs=$link_all_deplibs + +# Compile-time system search path for libraries +sys_lib_search_path_spec=$lt_sys_lib_search_path_spec + +# Run-time system search path for libraries +sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec + +# Fix the shell variable \$srcfile for the compiler. +fix_srcfile_path="$fix_srcfile_path" + +# Set to yes if exported symbols are required. +always_export_symbols=$always_export_symbols + +# The commands to list exported symbols. +export_symbols_cmds=$lt_export_symbols_cmds + +# The commands to extract the exported symbol list from a shared archive. +extract_expsyms_cmds=$lt_extract_expsyms_cmds + +# Symbols that should not be listed in the preloaded symbols. +exclude_expsyms=$lt_exclude_expsyms + +# Symbols that must always be exported. +include_expsyms=$lt_include_expsyms + +# ### END LIBTOOL CONFIG + +__EOF__ + + + case $host_os in + aix3*) + cat <<\EOF >> "$cfgfile" + +# AIX sometimes has problems with the GCC collect2 program. For some +# reason, if we set the COLLECT_NAMES environment variable, the problems +# vanish in a puff of smoke. +if test "X${COLLECT_NAMES+set}" != Xset; then + COLLECT_NAMES= + export COLLECT_NAMES +fi +EOF + ;; + esac + + # We use sed instead of cat because bash on DJGPP gets confused if + # if finds mixed CR/LF and LF-only lines. Since sed operates in + # text mode, it properly converts lines to CR/LF. This bash problem + # is reportedly fixed, but why not run on old versions too? + sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1) + + mv -f "$cfgfile" "$ofile" || \ + (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") + chmod +x "$ofile" + +else + # If there is no Makefile yet, we rely on a make rule to execute + # `config.status --recheck' to rerun these tests and create the + # libtool script then. + ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` + if test -f "$ltmain_in"; then + test -f Makefile && make "$ltmain" + fi +fi + + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + +CC="$lt_save_CC" + + +# Check whether --with-tags or --without-tags was given. +if test "${with_tags+set}" = set; then + withval="$with_tags" + tagnames="$withval" +fi; + +if test -f "$ltmain" && test -n "$tagnames"; then + if test ! -f "${ofile}"; then + { echo "$as_me:$LINENO: WARNING: output file \`$ofile' does not exist" >&5 +echo "$as_me: WARNING: output file \`$ofile' does not exist" >&2;} + fi + + if test -z "$LTCC"; then + eval "`$SHELL ${ofile} --config | grep '^LTCC='`" + if test -z "$LTCC"; then + { echo "$as_me:$LINENO: WARNING: output file \`$ofile' does not look like a libtool script" >&5 +echo "$as_me: WARNING: output file \`$ofile' does not look like a libtool script" >&2;} + else + { echo "$as_me:$LINENO: WARNING: using \`LTCC=$LTCC', extracted from \`$ofile'" >&5 +echo "$as_me: WARNING: using \`LTCC=$LTCC', extracted from \`$ofile'" >&2;} + fi + fi + + # Extract list of available tagged configurations in $ofile. + # Note that this assumes the entire list is on one line. + available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'` + + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for tagname in $tagnames; do + IFS="$lt_save_ifs" + # Check whether tagname contains only valid characters + case `$echo "X$tagname" | $Xsed -e 's:[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]::g'` in + "") ;; + *) { { echo "$as_me:$LINENO: error: invalid tag name: $tagname" >&5 +echo "$as_me: error: invalid tag name: $tagname" >&2;} + { (exit 1); exit 1; }; } + ;; + esac + + if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null + then + { { echo "$as_me:$LINENO: error: tag name \"$tagname\" already exists" >&5 +echo "$as_me: error: tag name \"$tagname\" already exists" >&2;} + { (exit 1); exit 1; }; } + fi + + # Update the list of available tags. + if test -n "$tagname"; then + echo appending configuration tag \"$tagname\" to $ofile + + case $tagname in + CXX) + if test -n "$CXX" && test "X$CXX" != "Xno"; then + ac_ext=cc +ac_cpp='$CXXCPP $CPPFLAGS' +ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_cxx_compiler_gnu + + + + +archive_cmds_need_lc_CXX=no +allow_undefined_flag_CXX= +always_export_symbols_CXX=no +archive_expsym_cmds_CXX= +export_dynamic_flag_spec_CXX= +hardcode_direct_CXX=no +hardcode_libdir_flag_spec_CXX= +hardcode_libdir_flag_spec_ld_CXX= +hardcode_libdir_separator_CXX= +hardcode_minus_L_CXX=no +hardcode_automatic_CXX=no +module_cmds_CXX= +module_expsym_cmds_CXX= +link_all_deplibs_CXX=unknown +old_archive_cmds_CXX=$old_archive_cmds +no_undefined_flag_CXX= +whole_archive_flag_spec_CXX= +enable_shared_with_static_runtimes_CXX=no + +# Dependencies to place before and after the object being linked: +predep_objects_CXX= +postdep_objects_CXX= +predeps_CXX= +postdeps_CXX= +compiler_lib_search_path_CXX= + +# Source file extension for C++ test sources. +ac_ext=cc + +# Object file extension for compiled C++ test sources. +objext=o +objext_CXX=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code="int some_variable = 0;\n" + +# Code to be used in simple link tests +lt_simple_link_test_code='int main(int, char *) { return(0); }\n' + +# ltmain only uses $CC for tagged configurations so make sure $CC is set. + +# If no C compiler was specified, use CC. +LTCC=${LTCC-"$CC"} + +# Allow CC to be a program name with arguments. +compiler=$CC + + +# Allow CC to be a program name with arguments. +lt_save_CC=$CC +lt_save_LD=$LD +lt_save_GCC=$GCC +GCC=$GXX +lt_save_with_gnu_ld=$with_gnu_ld +lt_save_path_LD=$lt_cv_path_LD +if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then + lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx +else + unset lt_cv_prog_gnu_ld +fi +if test -n "${lt_cv_path_LDCXX+set}"; then + lt_cv_path_LD=$lt_cv_path_LDCXX +else + unset lt_cv_path_LD +fi +test -z "${LDCXX+set}" || LD=$LDCXX +CC=${CXX-"c++"} +compiler=$CC +compiler_CXX=$CC +cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'` + +# We don't want -fno-exception wen compiling C++ code, so set the +# no_builtin_flag separately +if test "$GXX" = yes; then + lt_prog_compiler_no_builtin_flag_CXX=' -fno-builtin' +else + lt_prog_compiler_no_builtin_flag_CXX= +fi + +if test "$GXX" = yes; then + # Set up default GNU C++ configuration + + +# Check whether --with-gnu-ld or --without-gnu-ld was given. +if test "${with_gnu_ld+set}" = set; then + withval="$with_gnu_ld" + test "$withval" = no || with_gnu_ld=yes +else + with_gnu_ld=no +fi; +ac_prog=ld +if test "$GCC" = yes; then + # Check if gcc -print-prog-name=ld gives a path. + echo "$as_me:$LINENO: checking for ld used by $CC" >&5 +echo $ECHO_N "checking for ld used by $CC... $ECHO_C" >&6 + case $host in + *-*-mingw*) + # gcc leaves a trailing carriage return which upsets mingw + ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; + *) + ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; + esac + case $ac_prog in + # Accept absolute paths. + [\\/]* | ?:[\\/]*) + re_direlt='/[^/][^/]*/\.\./' + # Canonicalize the pathname of ld + ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'` + while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do + ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"` + done + test -z "$LD" && LD="$ac_prog" + ;; + "") + # If it fails, then pretend we aren't using GCC. + ac_prog=ld + ;; + *) + # If it is relative, then search for the first ld in PATH. + with_gnu_ld=unknown + ;; + esac +elif test "$with_gnu_ld" = yes; then + echo "$as_me:$LINENO: checking for GNU ld" >&5 +echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6 +else + echo "$as_me:$LINENO: checking for non-GNU ld" >&5 +echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6 +fi +if test "${lt_cv_path_LD+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -z "$LD"; then + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then + lt_cv_path_LD="$ac_dir/$ac_prog" + # Check to see if the program is GNU ld. I'd rather use --version, + # but apparently some GNU ld's only accept -v. + # Break only if it was the GNU/non-GNU ld that we prefer. + case `"$lt_cv_path_LD" -v 2>&1 &5 +echo "${ECHO_T}$LD" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi +test -z "$LD" && { { echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5 +echo "$as_me: error: no acceptable ld found in \$PATH" >&2;} + { (exit 1); exit 1; }; } +echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5 +echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6 +if test "${lt_cv_prog_gnu_ld+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + # I'd rather use --version here, but apparently some GNU ld's only accept -v. +case `$LD -v 2>&1 &5 +echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6 +with_gnu_ld=$lt_cv_prog_gnu_ld + + + + # Check if GNU C++ uses GNU ld as the underlying linker, since the + # archiving commands below assume that GNU ld is being used. + if test "$with_gnu_ld" = yes; then + archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + + hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir' + export_dynamic_flag_spec_CXX='${wl}--export-dynamic' + + # If archive_cmds runs LD, not CC, wlarc should be empty + # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to + # investigate it a little bit more. (MM) + wlarc='${wl}' + + # ancient GNU ld didn't support --whole-archive et. al. + if eval "`$CC -print-prog-name=ld` --help 2>&1" | \ + grep 'no-whole-archive' > /dev/null; then + whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + else + whole_archive_flag_spec_CXX= + fi + else + with_gnu_ld=no + wlarc= + + # A generic and very simple default shared library creation + # command for GNU C++ for the case where it uses the native + # linker, instead of GNU ld. If possible, this setting should + # overridden to take advantage of the native linker features on + # the platform it is being used on. + archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' + fi + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' + +else + GXX=no + with_gnu_ld=no + wlarc= +fi + +# PORTME: fill in a description of your system's C++ link characteristics +echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 +echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6 +ld_shlibs_CXX=yes +case $host_os in + aix3*) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + aix4* | aix5*) + if test "$host_cpu" = ia64; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. + aix_use_runtimelinking=no + exp_sym_flag='-Bexport' + no_entry_flag="" + else + aix_use_runtimelinking=no + + # Test if we are trying to use run time linking or normal + # AIX style linking. If -brtl is somewhere in LDFLAGS, we + # need to do runtime linking. + case $host_os in aix4.[23]|aix4.[23].*|aix5*) + for ld_flag in $LDFLAGS; do + case $ld_flag in + *-brtl*) + aix_use_runtimelinking=yes + break + ;; + esac + done + esac + + exp_sym_flag='-bexport' + no_entry_flag='-bnoentry' + fi + + # When large executables or shared objects are built, AIX ld can + # have problems creating the table of contents. If linking a library + # or program results in "error TOC overflow" add -mminimal-toc to + # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not + # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. + + archive_cmds_CXX='' + hardcode_direct_CXX=yes + hardcode_libdir_separator_CXX=':' + link_all_deplibs_CXX=yes + + if test "$GXX" = yes; then + case $host_os in aix4.012|aix4.012.*) + # We only want to do this on AIX 4.2 and lower, the check + # below for broken collect2 doesn't work under 4.3+ + collect2name=`${CC} -print-prog-name=collect2` + if test -f "$collect2name" && \ + strings "$collect2name" | grep resolve_lib_name >/dev/null + then + # We have reworked collect2 + hardcode_direct_CXX=yes + else + # We have old collect2 + hardcode_direct_CXX=unsupported + # It fails to find uninstalled libraries when the uninstalled + # path is not listed in the libpath. Setting hardcode_minus_L + # to unsupported forces relinking + hardcode_minus_L_CXX=yes + hardcode_libdir_flag_spec_CXX='-L$libdir' + hardcode_libdir_separator_CXX= + fi + esac + shared_flag='-shared' + else + # not using gcc + if test "$host_cpu" = ia64; then + # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release + # chokes on -Wl,-G. The following line is correct: + shared_flag='-G' + else + if test "$aix_use_runtimelinking" = yes; then + shared_flag='${wl}-G' + else + shared_flag='${wl}-bM:SRE' + fi + fi + fi + + # It seems that -bexpall does not export symbols beginning with + # underscore (_), so it is better to generate a list of symbols to export. + always_export_symbols_CXX=yes + if test "$aix_use_runtimelinking" = yes; then + # Warning - without using the other runtime loading flags (-brtl), + # -berok will link without error, but may produce a broken library. + allow_undefined_flag_CXX='-berok' + # Determine the default libpath from the value encoded in an empty executable. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + +aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } +}'` +# Check for a 64-bit object if we didn't find anything. +if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } +}'`; fi +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + + hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath" + + archive_expsym_cmds_CXX="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag" + else + if test "$host_cpu" = ia64; then + hardcode_libdir_flag_spec_CXX='${wl}-R $libdir:/usr/lib:/lib' + allow_undefined_flag_CXX="-z nodefs" + archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" + else + # Determine the default libpath from the value encoded in an empty executable. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + +aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } +}'` +# Check for a 64-bit object if we didn't find anything. +if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } +}'`; fi +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + + hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath" + # Warning - without using the other run time loading flags, + # -berok will link without error, but may produce a broken library. + no_undefined_flag_CXX=' ${wl}-bernotok' + allow_undefined_flag_CXX=' ${wl}-berok' + # -bexpall does not export symbols beginning with underscore (_) + always_export_symbols_CXX=yes + # Exported symbols can be pulled into shared objects from archives + whole_archive_flag_spec_CXX=' ' + archive_cmds_need_lc_CXX=yes + # This is similar to how AIX traditionally builds it's shared libraries. + archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + fi + fi + ;; + chorus*) + case $cc_basename in + *) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + esac + ;; + + cygwin* | mingw* | pw32*) + # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, CXX) is actually meaningless, + # as there is no search path for DLLs. + hardcode_libdir_flag_spec_CXX='-L$libdir' + allow_undefined_flag_CXX=unsupported + always_export_symbols_CXX=no + enable_shared_with_static_runtimes_CXX=yes + + if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then + archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' + # If the export-symbols file already is a .def file (1st line + # is EXPORTS), use it as is; otherwise, prepend... + archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then + cp $export_symbols $output_objdir/$soname.def; + else + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ + $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' + else + ld_shlibs_CXX=no + fi + ;; + + darwin* | rhapsody*) + if test "$GXX" = yes; then + archive_cmds_need_lc_CXX=no + case "$host_os" in + rhapsody* | darwin1.[012]) + allow_undefined_flag_CXX='-undefined suppress' + ;; + *) # Darwin 1.3 on + if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then + allow_undefined_flag_CXX='-flat_namespace -undefined suppress' + else + case ${MACOSX_DEPLOYMENT_TARGET} in + 10.[012]) + allow_undefined_flag_CXX='-flat_namespace -undefined suppress' + ;; + 10.*) + allow_undefined_flag_CXX='-undefined dynamic_lookup' + ;; + esac + fi + ;; + esac + lt_int_apple_cc_single_mod=no + output_verbose_link_cmd='echo' + if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then + lt_int_apple_cc_single_mod=yes + fi + if test "X$lt_int_apple_cc_single_mod" = Xyes ; then + archive_cmds_CXX='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring' + else + archive_cmds_CXX='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring' + fi + module_cmds_CXX='$CC ${wl}-bind_at_load $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' + + # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's + if test "X$lt_int_apple_cc_single_mod" = Xyes ; then + archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + else + archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + fi + module_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + hardcode_direct_CXX=no + hardcode_automatic_CXX=yes + hardcode_shlibpath_var_CXX=unsupported + whole_archive_flag_spec_CXX='-all_load $convenience' + link_all_deplibs_CXX=yes + else + ld_shlibs_CXX=no + fi + ;; + + dgux*) + case $cc_basename in + ec++) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + ghcx) + # Green Hills C++ Compiler + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + *) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + esac + ;; + freebsd12*) + # C++ shared libraries reported to be fairly broken before switch to ELF + ld_shlibs_CXX=no + ;; + freebsd-elf*) + archive_cmds_need_lc_CXX=no + ;; + freebsd* | kfreebsd*-gnu) + # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF + # conventions + ld_shlibs_CXX=yes + ;; + gnu*) + ;; + hpux9*) + hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir' + hardcode_libdir_separator_CXX=: + export_dynamic_flag_spec_CXX='${wl}-E' + hardcode_direct_CXX=yes + hardcode_minus_L_CXX=yes # Not in the search PATH, + # but as the default + # location of the library. + + case $cc_basename in + CC) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + aCC) + archive_cmds_CXX='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + ;; + *) + if test "$GXX" = yes; then + archive_cmds_CXX='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + else + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + fi + ;; + esac + ;; + hpux10*|hpux11*) + if test $with_gnu_ld = no; then + case "$host_cpu" in + hppa*64*) + hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir' + hardcode_libdir_flag_spec_ld_CXX='+b $libdir' + hardcode_libdir_separator_CXX=: + ;; + ia64*) + hardcode_libdir_flag_spec_CXX='-L$libdir' + ;; + *) + hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir' + hardcode_libdir_separator_CXX=: + export_dynamic_flag_spec_CXX='${wl}-E' + ;; + esac + fi + case "$host_cpu" in + hppa*64*) + hardcode_direct_CXX=no + hardcode_shlibpath_var_CXX=no + ;; + ia64*) + hardcode_direct_CXX=no + hardcode_shlibpath_var_CXX=no + hardcode_minus_L_CXX=yes # Not in the search PATH, + # but as the default + # location of the library. + ;; + *) + hardcode_direct_CXX=yes + hardcode_minus_L_CXX=yes # Not in the search PATH, + # but as the default + # location of the library. + ;; + esac + + case $cc_basename in + CC) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + aCC) + case "$host_cpu" in + hppa*64*|ia64*) + archive_cmds_CXX='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs' + ;; + *) + archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + esac + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + ;; + *) + if test "$GXX" = yes; then + if test $with_gnu_ld = no; then + case "$host_cpu" in + ia64*|hppa*64*) + archive_cmds_CXX='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs' + ;; + *) + archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + esac + fi + else + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + fi + ;; + esac + ;; + irix5* | irix6*) + case $cc_basename in + CC) + # SGI C++ + archive_cmds_CXX='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib' + + # Archives containing C++ object files must be created using + # "CC -ar", where "CC" is the IRIX C++ compiler. This is + # necessary to make sure instantiated templates are included + # in the archive. + old_archive_cmds_CXX='$CC -ar -WR,-u -o $oldlib $oldobjs' + ;; + *) + if test "$GXX" = yes; then + if test "$with_gnu_ld" = no; then + archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib' + else + archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib' + fi + fi + link_all_deplibs_CXX=yes + ;; + esac + hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator_CXX=: + ;; + linux*) + case $cc_basename in + KCC) + # Kuck and Associates, Inc. (KAI) C++ Compiler + + # KCC will only create a shared library if the output file + # ends with ".so" (or ".sl" for HP-UX), so rename the library + # to its proper name (with version) after linking. + archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' + archive_expsym_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib' + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | grep "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + + hardcode_libdir_flag_spec_CXX='${wl}--rpath,$libdir' + export_dynamic_flag_spec_CXX='${wl}--export-dynamic' + + # Archives containing C++ object files must be created using + # "CC -Bstatic", where "CC" is the KAI C++ compiler. + old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs' + ;; + icpc) + # Intel C++ + with_gnu_ld=yes + archive_cmds_need_lc_CXX=no + archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' + export_dynamic_flag_spec_CXX='${wl}--export-dynamic' + whole_archive_flag_spec_CXX='${wl}--whole-archive$convenience ${wl}--no-whole-archive' + ;; + cxx) + # Compaq C++ + archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols' + + runpath_var=LD_RUN_PATH + hardcode_libdir_flag_spec_CXX='-rpath $libdir' + hardcode_libdir_separator_CXX=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + ;; + esac + ;; + lynxos*) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + m88k*) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + mvs*) + case $cc_basename in + cxx) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + *) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + esac + ;; + netbsd* | knetbsd*-gnu) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + archive_cmds_CXX='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' + wlarc= + hardcode_libdir_flag_spec_CXX='-R$libdir' + hardcode_direct_CXX=yes + hardcode_shlibpath_var_CXX=no + fi + # Workaround some broken pre-1.5 toolchains + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"' + ;; + osf3*) + case $cc_basename in + KCC) + # Kuck and Associates, Inc. (KAI) C++ Compiler + + # KCC will only create a shared library if the output file + # ends with ".so" (or ".sl" for HP-UX), so rename the library + # to its proper name (with version) after linking. + archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' + + hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' + hardcode_libdir_separator_CXX=: + + # Archives containing C++ object files must be created using + # "CC -Bstatic", where "CC" is the KAI C++ compiler. + old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs' + + ;; + RCC) + # Rational C++ 2.4.1 + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + cxx) + allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*' + archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${objdir}/so_locations -o $lib' + + hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator_CXX=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + ;; + *) + if test "$GXX" = yes && test "$with_gnu_ld" = no; then + allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*' + archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib' + + hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator_CXX=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' + + else + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + fi + ;; + esac + ;; + osf4* | osf5*) + case $cc_basename in + KCC) + # Kuck and Associates, Inc. (KAI) C++ Compiler + + # KCC will only create a shared library if the output file + # ends with ".so" (or ".sl" for HP-UX), so rename the library + # to its proper name (with version) after linking. + archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' + + hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' + hardcode_libdir_separator_CXX=: + + # Archives containing C++ object files must be created using + # the KAI C++ compiler. + old_archive_cmds_CXX='$CC -o $oldlib $oldobjs' + ;; + RCC) + # Rational C++ 2.4.1 + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + cxx) + allow_undefined_flag_CXX=' -expect_unresolved \*' + archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib' + archive_expsym_cmds_CXX='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ + echo "-hidden">> $lib.exp~ + $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp `test -n "$verstring" && echo -set_version $verstring` -update_registry $objdir/so_locations -o $lib~ + $rm $lib.exp' + + hardcode_libdir_flag_spec_CXX='-rpath $libdir' + hardcode_libdir_separator_CXX=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + ;; + *) + if test "$GXX" = yes && test "$with_gnu_ld" = no; then + allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*' + archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib' + + hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator_CXX=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' + + else + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + fi + ;; + esac + ;; + psos*) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + sco*) + archive_cmds_need_lc_CXX=no + case $cc_basename in + CC) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + *) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + esac + ;; + sunos4*) + case $cc_basename in + CC) + # Sun C++ 4.x + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + lcc) + # Lucid + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + *) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + esac + ;; + solaris*) + case $cc_basename in + CC) + # Sun C++ 4.2, 5.x and Centerline C++ + no_undefined_flag_CXX=' -zdefs' + archive_cmds_CXX='$CC -G${allow_undefined_flag} -nolib -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $CC -G${allow_undefined_flag} -nolib ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' + + hardcode_libdir_flag_spec_CXX='-R$libdir' + hardcode_shlibpath_var_CXX=no + case $host_os in + solaris2.0-5 | solaris2.0-5.*) ;; + *) + # The C++ compiler is used as linker so we must use $wl + # flag to pass the commands to the underlying system + # linker. + # Supported since Solaris 2.6 (maybe 2.5.1?) + whole_archive_flag_spec_CXX='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' + ;; + esac + link_all_deplibs_CXX=yes + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep "\-[LR]"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + + # Archives containing C++ object files must be created using + # "CC -xar", where "CC" is the Sun C++ compiler. This is + # necessary to make sure instantiated templates are included + # in the archive. + old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs' + ;; + gcx) + # Green Hills C++ Compiler + archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' + + # The C++ compiler must be used to create the archive. + old_archive_cmds_CXX='$CC $LDFLAGS -archive -o $oldlib $oldobjs' + ;; + *) + # GNU C++ compiler with Solaris linker + if test "$GXX" = yes && test "$with_gnu_ld" = no; then + no_undefined_flag_CXX=' ${wl}-z ${wl}defs' + if $CC --version | grep -v '^2\.7' > /dev/null; then + archive_cmds_CXX='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' + archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\"" + else + # g++ 2.7 appears to require `-G' NOT `-shared' on this + # platform. + archive_cmds_CXX='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' + archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\"" + fi + + hardcode_libdir_flag_spec_CXX='${wl}-R $wl$libdir' + fi + ;; + esac + ;; + sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[78]* | unixware7*) + archive_cmds_need_lc_CXX=no + ;; + tandem*) + case $cc_basename in + NCC) + # NonStop-UX NCC 3.20 + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + *) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + esac + ;; + vxworks*) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + *) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; +esac +echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5 +echo "${ECHO_T}$ld_shlibs_CXX" >&6 +test "$ld_shlibs_CXX" = no && can_build_shared=no + +GCC_CXX="$GXX" +LD_CXX="$LD" + + +cat > conftest.$ac_ext <&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + # Parse the compiler output and extract the necessary + # objects, libraries and library flags. + + # Sentinel used to keep track of whether or not we are before + # the conftest object file. + pre_test_object_deps_done=no + + # The `*' in the case matches for architectures that use `case' in + # $output_verbose_cmd can trigger glob expansion during the loop + # eval without this substitution. + output_verbose_link_cmd="`$echo \"X$output_verbose_link_cmd\" | $Xsed -e \"$no_glob_subst\"`" + + for p in `eval $output_verbose_link_cmd`; do + case $p in + + -L* | -R* | -l*) + # Some compilers place space between "-{L,R}" and the path. + # Remove the space. + if test $p = "-L" \ + || test $p = "-R"; then + prev=$p + continue + else + prev= + fi + + if test "$pre_test_object_deps_done" = no; then + case $p in + -L* | -R*) + # Internal compiler library paths should come after those + # provided the user. The postdeps already come after the + # user supplied libs so there is no need to process them. + if test -z "$compiler_lib_search_path_CXX"; then + compiler_lib_search_path_CXX="${prev}${p}" + else + compiler_lib_search_path_CXX="${compiler_lib_search_path_CXX} ${prev}${p}" + fi + ;; + # The "-l" case would never come before the object being + # linked, so don't bother handling this case. + esac + else + if test -z "$postdeps_CXX"; then + postdeps_CXX="${prev}${p}" + else + postdeps_CXX="${postdeps_CXX} ${prev}${p}" + fi + fi + ;; + + *.$objext) + # This assumes that the test object file only shows up + # once in the compiler output. + if test "$p" = "conftest.$objext"; then + pre_test_object_deps_done=yes + continue + fi + + if test "$pre_test_object_deps_done" = no; then + if test -z "$predep_objects_CXX"; then + predep_objects_CXX="$p" + else + predep_objects_CXX="$predep_objects_CXX $p" + fi + else + if test -z "$postdep_objects_CXX"; then + postdep_objects_CXX="$p" + else + postdep_objects_CXX="$postdep_objects_CXX $p" + fi + fi + ;; + + *) ;; # Ignore the rest. + + esac + done + + # Clean up. + rm -f a.out a.exe +else + echo "libtool.m4: error: problem compiling CXX test program" +fi + +$rm -f confest.$objext + +case " $postdeps_CXX " in +*" -lc "*) archive_cmds_need_lc_CXX=no ;; +esac + +lt_prog_compiler_wl_CXX= +lt_prog_compiler_pic_CXX= +lt_prog_compiler_static_CXX= + +echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 +echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6 + + # C++ specific cases for pic, static, wl, etc. + if test "$GXX" = yes; then + lt_prog_compiler_wl_CXX='-Wl,' + lt_prog_compiler_static_CXX='-static' + + case $host_os in + aix*) + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + lt_prog_compiler_static_CXX='-Bstatic' + fi + ;; + amigaos*) + # FIXME: we need at least 68020 code to build shared libraries, but + # adding the `-m68020' flag to GCC prevents building anything better, + # like `-m68040'. + lt_prog_compiler_pic_CXX='-m68020 -resident32 -malways-restore-a4' + ;; + beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) + # PIC is the default for these OSes. + ;; + mingw* | os2* | pw32*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + lt_prog_compiler_pic_CXX='-DDLL_EXPORT' + ;; + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + lt_prog_compiler_pic_CXX='-fno-common' + ;; + *djgpp*) + # DJGPP does not support shared libraries at all + lt_prog_compiler_pic_CXX= + ;; + sysv4*MP*) + if test -d /usr/nec; then + lt_prog_compiler_pic_CXX=-Kconform_pic + fi + ;; + hpux*) + # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but + # not for PA HP-UX. + case "$host_cpu" in + hppa*64*|ia64*) + ;; + *) + lt_prog_compiler_pic_CXX='-fPIC' + ;; + esac + ;; + *) + lt_prog_compiler_pic_CXX='-fPIC' + ;; + esac + else + case $host_os in + aix4* | aix5*) + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + lt_prog_compiler_static_CXX='-Bstatic' + else + lt_prog_compiler_static_CXX='-bnso -bI:/lib/syscalls.exp' + fi + ;; + chorus*) + case $cc_basename in + cxch68) + # Green Hills C++ Compiler + # _LT_AC_TAGVAR(lt_prog_compiler_static, CXX)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a" + ;; + esac + ;; + dgux*) + case $cc_basename in + ec++) + lt_prog_compiler_pic_CXX='-KPIC' + ;; + ghcx) + # Green Hills C++ Compiler + lt_prog_compiler_pic_CXX='-pic' + ;; + *) + ;; + esac + ;; + freebsd* | kfreebsd*-gnu) + # FreeBSD uses GNU C++ + ;; + hpux9* | hpux10* | hpux11*) + case $cc_basename in + CC) + lt_prog_compiler_wl_CXX='-Wl,' + lt_prog_compiler_static_CXX="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive" + if test "$host_cpu" != ia64; then + lt_prog_compiler_pic_CXX='+Z' + fi + ;; + aCC) + lt_prog_compiler_wl_CXX='-Wl,' + lt_prog_compiler_static_CXX="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive" + case "$host_cpu" in + hppa*64*|ia64*) + # +Z the default + ;; + *) + lt_prog_compiler_pic_CXX='+Z' + ;; + esac + ;; + *) + ;; + esac + ;; + irix5* | irix6* | nonstopux*) + case $cc_basename in + CC) + lt_prog_compiler_wl_CXX='-Wl,' + lt_prog_compiler_static_CXX='-non_shared' + # CC pic flag -KPIC is the default. + ;; + *) + ;; + esac + ;; + linux*) + case $cc_basename in + KCC) + # KAI C++ Compiler + lt_prog_compiler_wl_CXX='--backend -Wl,' + lt_prog_compiler_pic_CXX='-fPIC' + ;; + icpc) + # Intel C++ + lt_prog_compiler_wl_CXX='-Wl,' + lt_prog_compiler_pic_CXX='-KPIC' + lt_prog_compiler_static_CXX='-static' + ;; + cxx) + # Compaq C++ + # Make sure the PIC flag is empty. It appears that all Alpha + # Linux and Compaq Tru64 Unix objects are PIC. + lt_prog_compiler_pic_CXX= + lt_prog_compiler_static_CXX='-non_shared' + ;; + *) + ;; + esac + ;; + lynxos*) + ;; + m88k*) + ;; + mvs*) + case $cc_basename in + cxx) + lt_prog_compiler_pic_CXX='-W c,exportall' + ;; + *) + ;; + esac + ;; + netbsd* | knetbsd*-gnu) + ;; + osf3* | osf4* | osf5*) + case $cc_basename in + KCC) + lt_prog_compiler_wl_CXX='--backend -Wl,' + ;; + RCC) + # Rational C++ 2.4.1 + lt_prog_compiler_pic_CXX='-pic' + ;; + cxx) + # Digital/Compaq C++ + lt_prog_compiler_wl_CXX='-Wl,' + # Make sure the PIC flag is empty. It appears that all Alpha + # Linux and Compaq Tru64 Unix objects are PIC. + lt_prog_compiler_pic_CXX= + lt_prog_compiler_static_CXX='-non_shared' + ;; + *) + ;; + esac + ;; + psos*) + ;; + sco*) + case $cc_basename in + CC) + lt_prog_compiler_pic_CXX='-fPIC' + ;; + *) + ;; + esac + ;; + solaris*) + case $cc_basename in + CC) + # Sun C++ 4.2, 5.x and Centerline C++ + lt_prog_compiler_pic_CXX='-KPIC' + lt_prog_compiler_static_CXX='-Bstatic' + lt_prog_compiler_wl_CXX='-Qoption ld ' + ;; + gcx) + # Green Hills C++ Compiler + lt_prog_compiler_pic_CXX='-PIC' + ;; + *) + ;; + esac + ;; + sunos4*) + case $cc_basename in + CC) + # Sun C++ 4.x + lt_prog_compiler_pic_CXX='-pic' + lt_prog_compiler_static_CXX='-Bstatic' + ;; + lcc) + # Lucid + lt_prog_compiler_pic_CXX='-pic' + ;; + *) + ;; + esac + ;; + tandem*) + case $cc_basename in + NCC) + # NonStop-UX NCC 3.20 + lt_prog_compiler_pic_CXX='-KPIC' + ;; + *) + ;; + esac + ;; + unixware*) + ;; + vxworks*) + ;; + *) + lt_prog_compiler_can_build_shared_CXX=no + ;; + esac + fi + +echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_CXX" >&5 +echo "${ECHO_T}$lt_prog_compiler_pic_CXX" >&6 + +# +# Check to make sure the PIC flag actually works. +# +if test -n "$lt_prog_compiler_pic_CXX"; then + +echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works" >&5 +echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works... $ECHO_C" >&6 +if test "${lt_prog_compiler_pic_works_CXX+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + lt_prog_compiler_pic_works_CXX=no + ac_outfile=conftest.$ac_objext + printf "$lt_simple_compile_test_code" > conftest.$ac_ext + lt_compiler_flag="$lt_prog_compiler_pic_CXX -DPIC" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + # The option is referenced via a variable to avoid confusing sed. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:10665: $lt_compile\"" >&5) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&5 + echo "$as_me:10669: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + if test ! -s conftest.err; then + lt_prog_compiler_pic_works_CXX=yes + fi + fi + $rm conftest* + +fi +echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works_CXX" >&5 +echo "${ECHO_T}$lt_prog_compiler_pic_works_CXX" >&6 + +if test x"$lt_prog_compiler_pic_works_CXX" = xyes; then + case $lt_prog_compiler_pic_CXX in + "" | " "*) ;; + *) lt_prog_compiler_pic_CXX=" $lt_prog_compiler_pic_CXX" ;; + esac +else + lt_prog_compiler_pic_CXX= + lt_prog_compiler_can_build_shared_CXX=no +fi + +fi +case "$host_os" in + # For platforms which do not support PIC, -DPIC is meaningless: + *djgpp*) + lt_prog_compiler_pic_CXX= + ;; + *) + lt_prog_compiler_pic_CXX="$lt_prog_compiler_pic_CXX -DPIC" + ;; +esac + +echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 +echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6 +if test "${lt_cv_prog_compiler_c_o_CXX+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + lt_cv_prog_compiler_c_o_CXX=no + $rm -r conftest 2>/dev/null + mkdir conftest + cd conftest + mkdir out + printf "$lt_simple_compile_test_code" > conftest.$ac_ext + + lt_compiler_flag="-o out/conftest2.$ac_objext" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:10725: $lt_compile\"" >&5) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&5 + echo "$as_me:10729: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + if test ! -s out/conftest.err; then + lt_cv_prog_compiler_c_o_CXX=yes + fi + fi + chmod u+w . + $rm conftest* + # SGI C++ compiler will create directory out/ii_files/ for + # template instantiation + test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files + $rm out/* && rmdir out + cd .. + rmdir conftest + $rm conftest* + +fi +echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_CXX" >&5 +echo "${ECHO_T}$lt_cv_prog_compiler_c_o_CXX" >&6 + + +hard_links="nottested" +if test "$lt_cv_prog_compiler_c_o_CXX" = no && test "$need_locks" != no; then + # do not overwrite the value of need_locks provided by the user + echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 +echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6 + hard_links=yes + $rm conftest* + ln conftest.a conftest.b 2>/dev/null && hard_links=no + touch conftest.a + ln conftest.a conftest.b 2>&5 || hard_links=no + ln conftest.a conftest.b 2>/dev/null && hard_links=no + echo "$as_me:$LINENO: result: $hard_links" >&5 +echo "${ECHO_T}$hard_links" >&6 + if test "$hard_links" = no; then + { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 +echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} + need_locks=warn + fi +else + need_locks=no +fi + +echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 +echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6 + + export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + case $host_os in + aix4* | aix5*) + # If we're using GNU nm, then we don't want the "-C" option. + # -C means demangle to AIX nm, but means don't demangle with GNU nm + if $NM -V 2>&1 | grep 'GNU' > /dev/null; then + export_symbols_cmds_CXX='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' + else + export_symbols_cmds_CXX='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' + fi + ;; + pw32*) + export_symbols_cmds_CXX="$ltdll_cmds" + ;; + cygwin* | mingw*) + export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGS] /s/.* \([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols' + ;; + linux*) + link_all_deplibs_CXX=no + ;; + *) + export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + ;; + esac + +echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5 +echo "${ECHO_T}$ld_shlibs_CXX" >&6 +test "$ld_shlibs_CXX" = no && can_build_shared=no + +variables_saved_for_relink="PATH $shlibpath_var $runpath_var" +if test "$GCC" = yes; then + variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" +fi + +# +# Do we need to explicitly link libc? +# +case "x$archive_cmds_need_lc_CXX" in +x|xyes) + # Assume -lc should be added + archive_cmds_need_lc_CXX=yes + + if test "$enable_shared" = yes && test "$GCC" = yes; then + case $archive_cmds_CXX in + *'~'*) + # FIXME: we may have to deal with multi-command sequences. + ;; + '$CC '*) + # Test whether the compiler implicitly links with -lc since on some + # systems, -lgcc has to come before -lc. If gcc already passes -lc + # to ld, don't add -lc before -lgcc. + echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 +echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6 + $rm conftest* + printf "$lt_simple_compile_test_code" > conftest.$ac_ext + + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } 2>conftest.err; then + soname=conftest + lib=conftest + libobjs=conftest.$ac_objext + deplibs= + wl=$lt_prog_compiler_wl_CXX + compiler_flags=-v + linker_flags=-v + verstring= + output_objdir=. + libname=conftest + lt_save_allow_undefined_flag=$allow_undefined_flag_CXX + allow_undefined_flag_CXX= + if { (eval echo "$as_me:$LINENO: \"$archive_cmds_CXX 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5 + (eval $archive_cmds_CXX 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } + then + archive_cmds_need_lc_CXX=no + else + archive_cmds_need_lc_CXX=yes + fi + allow_undefined_flag_CXX=$lt_save_allow_undefined_flag + else + cat conftest.err 1>&5 + fi + $rm conftest* + echo "$as_me:$LINENO: result: $archive_cmds_need_lc_CXX" >&5 +echo "${ECHO_T}$archive_cmds_need_lc_CXX" >&6 + ;; + esac + fi + ;; +esac + +echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 +echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6 +library_names_spec= +libname_spec='lib$name' +soname_spec= +shrext_cmds=".so" +postinstall_cmds= +postuninstall_cmds= +finish_cmds= +finish_eval= +shlibpath_var= +shlibpath_overrides_runpath=unknown +version_type=none +dynamic_linker="$host_os ld.so" +sys_lib_dlsearch_path_spec="/lib /usr/lib" +if test "$GCC" = yes; then + sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` + if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then + # if the path contains ";" then we assume it to be the separator + # otherwise default to the standard path separator (i.e. ":") - it is + # assumed that no part of a normal pathname contains ";" but that should + # okay in the real world where ";" in dirpaths is itself problematic. + sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` + else + sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + fi +else + sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" +fi +need_lib_prefix=unknown +hardcode_into_libs=no + +# when you set need_version to no, make sure it does not cause -set_version +# flags to be left without arguments +need_version=unknown + +case $host_os in +aix3*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' + shlibpath_var=LIBPATH + + # AIX 3 has no versioning support, so we append a major version to the name. + soname_spec='${libname}${release}${shared_ext}$major' + ;; + +aix4* | aix5*) + version_type=linux + need_lib_prefix=no + need_version=no + hardcode_into_libs=yes + if test "$host_cpu" = ia64; then + # AIX 5 supports IA64 + library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + else + # With GCC up to 2.95.x, collect2 would create an import file + # for dependence libraries. The import file would start with + # the line `#! .'. This would cause the generated library to + # depend on `.', always an invalid library. This was fixed in + # development snapshots of GCC prior to 3.0. + case $host_os in + aix4 | aix4.[01] | aix4.[01].*) + if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' + echo ' yes ' + echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then + : + else + can_build_shared=no + fi + ;; + esac + # AIX (on Power*) has no versioning support, so currently we can not hardcode correct + # soname into executable. Probably we can add versioning support to + # collect2, so additional links can be useful in future. + if test "$aix_use_runtimelinking" = yes; then + # If using run time linking (on AIX 4.2 or later) use lib.so + # instead of lib.a to let people know that these are not + # typical AIX shared libraries. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + else + # We preserve .a as extension for shared libraries through AIX4.2 + # and later when we are not doing run time linking. + library_names_spec='${libname}${release}.a $libname.a' + soname_spec='${libname}${release}${shared_ext}$major' + fi + shlibpath_var=LIBPATH + fi + ;; + +amigaos*) + library_names_spec='$libname.ixlibrary $libname.a' + # Create ${libname}_ixlibrary.a entries in /sys/libs. + finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' + ;; + +beos*) + library_names_spec='${libname}${shared_ext}' + dynamic_linker="$host_os ld.so" + shlibpath_var=LIBRARY_PATH + ;; + +bsdi4*) + version_type=linux + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" + sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" + # the default ld.so.conf also contains /usr/contrib/lib and + # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow + # libtool to hard-code these into programs + ;; + +cygwin* | mingw* | pw32*) + version_type=windows + shrext_cmds=".dll" + need_version=no + need_lib_prefix=no + + case $GCC,$host_os in + yes,cygwin* | yes,mingw* | yes,pw32*) + library_names_spec='$libname.dll.a' + # DLL is installed to $(libdir)/../bin by postinstall_cmds + postinstall_cmds='base_file=`basename \${file}`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $rm \$dlpath' + shlibpath_overrides_runpath=yes + + case $host_os in + cygwin*) + # Cygwin DLLs use 'cyg' prefix rather than 'lib' + soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" + ;; + mingw*) + # MinGW DLLs use traditional 'lib' prefix + soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` + if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then + # It is most probably a Windows format PATH printed by + # mingw gcc, but we are running on Cygwin. Gcc prints its search + # path with ; separators, and with drive letters. We can handle the + # drive letters (cygwin fileutils understands them), so leave them, + # especially as we might pass files found there to a mingw objdump, + # which wouldn't understand a cygwinified path. Ahh. + sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` + else + sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + fi + ;; + pw32*) + # pw32 DLLs use 'pw' prefix rather than 'lib' + library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/./-/g'`${versuffix}${shared_ext}' + ;; + esac + ;; + + *) + library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' + ;; + esac + dynamic_linker='Win32 ld.exe' + # FIXME: first we should search . and the directory the executable is in + shlibpath_var=PATH + ;; + +darwin* | rhapsody*) + dynamic_linker="$host_os dyld" + version_type=darwin + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext' + soname_spec='${libname}${release}${major}$shared_ext' + shlibpath_overrides_runpath=yes + shlibpath_var=DYLD_LIBRARY_PATH + shrext_cmds='$(test .$module = .yes && echo .so || echo .dylib)' + # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same. + if test "$GCC" = yes; then + sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"` + else + sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib' + fi + sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' + ;; + +dgux*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +freebsd1*) + dynamic_linker=no + ;; + +kfreebsd*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='GNU ld.so' + ;; + +freebsd*) + objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout` + version_type=freebsd-$objformat + case $version_type in + freebsd-elf*) + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' + need_version=no + need_lib_prefix=no + ;; + freebsd-*) + library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' + need_version=yes + ;; + esac + shlibpath_var=LD_LIBRARY_PATH + case $host_os in + freebsd2*) + shlibpath_overrides_runpath=yes + ;; + freebsd3.01* | freebsdelf3.01*) + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + *) # from 3.2 on + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + esac + ;; + +gnu*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + hardcode_into_libs=yes + ;; + +hpux9* | hpux10* | hpux11*) + # Give a soname corresponding to the major version so that dld.sl refuses to + # link against other versions. + version_type=sunos + need_lib_prefix=no + need_version=no + case "$host_cpu" in + ia64*) + shrext_cmds='.so' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.so" + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + if test "X$HPUX_IA64_MODE" = X32; then + sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" + else + sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" + fi + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + hppa*64*) + shrext_cmds='.sl' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.sl" + shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + *) + shrext_cmds='.sl' + dynamic_linker="$host_os dld.sl" + shlibpath_var=SHLIB_PATH + shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + ;; + esac + # HP-UX runs *really* slowly unless shared libraries are mode 555. + postinstall_cmds='chmod 555 $lib' + ;; + +irix5* | irix6* | nonstopux*) + case $host_os in + nonstopux*) version_type=nonstopux ;; + *) + if test "$lt_cv_prog_gnu_ld" = yes; then + version_type=linux + else + version_type=irix + fi ;; + esac + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' + case $host_os in + irix5* | nonstopux*) + libsuff= shlibsuff= + ;; + *) + case $LD in # libtool.m4 will add one of these switches to LD + *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") + libsuff= shlibsuff= libmagic=32-bit;; + *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") + libsuff=32 shlibsuff=N32 libmagic=N32;; + *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") + libsuff=64 shlibsuff=64 libmagic=64-bit;; + *) libsuff= shlibsuff= libmagic=never-match;; + esac + ;; + esac + shlibpath_var=LD_LIBRARY${shlibsuff}_PATH + shlibpath_overrides_runpath=no + sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" + sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" + hardcode_into_libs=yes + ;; + +# No shared lib support for Linux oldld, aout, or coff. +linux*oldld* | linux*aout* | linux*coff*) + dynamic_linker=no + ;; + +# This must be Linux ELF. +linux*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + # This implies no fast_install, which is unacceptable. + # Some rework will be needed to allow for fast_install + # before this can be enabled. + hardcode_into_libs=yes + + # Append ld.so.conf contents to the search path + if test -f /etc/ld.so.conf; then + lt_ld_extra=`$SED -e 's/:,\t/ /g;s/=^=*$//;s/=^= * / /g' /etc/ld.so.conf | tr '\n' ' '` + sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" + fi + + # We used to test for /lib/ld.so.1 and disable shared libraries on + # powerpc, because MkLinux only supported shared libraries with the + # GNU dynamic linker. Since this was broken with cross compilers, + # most powerpc-linux boxes support dynamic linking these days and + # people can always --disable-shared, the test was removed, and we + # assume the GNU/Linux dynamic linker is in use. + dynamic_linker='GNU/Linux ld.so' + ;; + +knetbsd*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='GNU ld.so' + ;; + +netbsd*) + version_type=sunos + need_lib_prefix=no + need_version=no + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + dynamic_linker='NetBSD (a.out) ld.so' + else + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + dynamic_linker='NetBSD ld.elf_so' + fi + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + +newsos6) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + ;; + +nto-qnx*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + ;; + +openbsd*) + version_type=sunos + need_lib_prefix=no + need_version=yes + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + shlibpath_var=LD_LIBRARY_PATH + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + case $host_os in + openbsd2.[89] | openbsd2.[89].*) + shlibpath_overrides_runpath=no + ;; + *) + shlibpath_overrides_runpath=yes + ;; + esac + else + shlibpath_overrides_runpath=yes + fi + ;; + +os2*) + libname_spec='$name' + shrext_cmds=".dll" + need_lib_prefix=no + library_names_spec='$libname${shared_ext} $libname.a' + dynamic_linker='OS/2 ld.exe' + shlibpath_var=LIBPATH + ;; + +osf3* | osf4* | osf5*) + version_type=osf + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" + sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" + ;; + +sco3.2v5*) + version_type=osf + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + ;; + +solaris*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + # ldd complains unless libraries are executable + postinstall_cmds='chmod +x $lib' + ;; + +sunos4*) + version_type=sunos + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + if test "$with_gnu_ld" = yes; then + need_lib_prefix=no + fi + need_version=yes + ;; + +sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + case $host_vendor in + sni) + shlibpath_overrides_runpath=no + need_lib_prefix=no + export_dynamic_flag_spec='${wl}-Blargedynsym' + runpath_var=LD_RUN_PATH + ;; + siemens) + need_lib_prefix=no + ;; + motorola) + need_lib_prefix=no + need_version=no + shlibpath_overrides_runpath=no + sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' + ;; + esac + ;; + +sysv4*MP*) + if test -d /usr/nec ;then + version_type=linux + library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' + soname_spec='$libname${shared_ext}.$major' + shlibpath_var=LD_LIBRARY_PATH + fi + ;; + +uts4*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +*) + dynamic_linker=no + ;; +esac +echo "$as_me:$LINENO: result: $dynamic_linker" >&5 +echo "${ECHO_T}$dynamic_linker" >&6 +test "$dynamic_linker" = no && can_build_shared=no + +echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 +echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6 +hardcode_action_CXX= +if test -n "$hardcode_libdir_flag_spec_CXX" || \ + test -n "$runpath_var CXX" || \ + test "X$hardcode_automatic_CXX"="Xyes" ; then + + # We can hardcode non-existant directories. + if test "$hardcode_direct_CXX" != no && + # If the only mechanism to avoid hardcoding is shlibpath_var, we + # have to relink, otherwise we might link with an installed library + # when we should be linking with a yet-to-be-installed one + ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, CXX)" != no && + test "$hardcode_minus_L_CXX" != no; then + # Linking always hardcodes the temporary library directory. + hardcode_action_CXX=relink + else + # We can link without hardcoding, and we can hardcode nonexisting dirs. + hardcode_action_CXX=immediate + fi +else + # We cannot hardcode anything, or else we can only hardcode existing + # directories. + hardcode_action_CXX=unsupported +fi +echo "$as_me:$LINENO: result: $hardcode_action_CXX" >&5 +echo "${ECHO_T}$hardcode_action_CXX" >&6 + +if test "$hardcode_action_CXX" = relink; then + # Fast installation is not supported + enable_fast_install=no +elif test "$shlibpath_overrides_runpath" = yes || + test "$enable_shared" = no; then + # Fast installation is not necessary + enable_fast_install=needless +fi + +striplib= +old_striplib= +echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5 +echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6 +if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then + test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" + test -z "$striplib" && striplib="$STRIP --strip-unneeded" + echo "$as_me:$LINENO: result: yes" >&5 +echo "${ECHO_T}yes" >&6 +else +# FIXME - insert some real tests, host_os isn't really good enough + case $host_os in + darwin*) + if test -n "$STRIP" ; then + striplib="$STRIP -x" + echo "$as_me:$LINENO: result: yes" >&5 +echo "${ECHO_T}yes" >&6 + else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + ;; + *) + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 + ;; + esac +fi + +if test "x$enable_dlopen" != xyes; then + enable_dlopen=unknown + enable_dlopen_self=unknown + enable_dlopen_self_static=unknown +else + lt_cv_dlopen=no + lt_cv_dlopen_libs= + + case $host_os in beos*) - if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then - allow_undefined_flag=unsupported - # Joseph Beckenbach says some releases of gcc - # support --undefined. This deserves some investigation. FIXME - archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + lt_cv_dlopen="load_add_on" + lt_cv_dlopen_libs= + lt_cv_dlopen_self=yes + ;; + + mingw* | pw32*) + lt_cv_dlopen="LoadLibrary" + lt_cv_dlopen_libs= + ;; + + cygwin*) + lt_cv_dlopen="dlopen" + lt_cv_dlopen_libs= + ;; + + darwin*) + # if libdl is installed we need to link against it + echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 +echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6 +if test "${ac_cv_lib_dl_dlopen+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldl $LIBS" +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char dlopen (); +int +main () +{ +dlopen (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_lib_dl_dlopen=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_lib_dl_dlopen=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 +echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6 +if test $ac_cv_lib_dl_dlopen = yes; then + lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" +else + + lt_cv_dlopen="dyld" + lt_cv_dlopen_libs= + lt_cv_dlopen_self=yes + +fi + + ;; + + *) + echo "$as_me:$LINENO: checking for shl_load" >&5 +echo $ECHO_N "checking for shl_load... $ECHO_C" >&6 +if test "${ac_cv_func_shl_load+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* Define shl_load to an innocuous variant, in case declares shl_load. + For example, HP-UX 11i declares gettimeofday. */ +#define shl_load innocuous_shl_load + +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char shl_load (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ + +#ifdef __STDC__ +# include +#else +# include +#endif + +#undef shl_load + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +{ +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char shl_load (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined (__stub_shl_load) || defined (__stub___shl_load) +choke me +#else +char (*f) () = shl_load; +#endif +#ifdef __cplusplus +} +#endif + +int +main () +{ +return f != shl_load; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_func_shl_load=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_func_shl_load=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5 +echo "${ECHO_T}$ac_cv_func_shl_load" >&6 +if test $ac_cv_func_shl_load = yes; then + lt_cv_dlopen="shl_load" +else + echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5 +echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6 +if test "${ac_cv_lib_dld_shl_load+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldld $LIBS" +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char shl_load (); +int +main () +{ +shl_load (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_lib_dld_shl_load=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_lib_dld_shl_load=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5 +echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6 +if test $ac_cv_lib_dld_shl_load = yes; then + lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld" +else + echo "$as_me:$LINENO: checking for dlopen" >&5 +echo $ECHO_N "checking for dlopen... $ECHO_C" >&6 +if test "${ac_cv_func_dlopen+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* Define dlopen to an innocuous variant, in case declares dlopen. + For example, HP-UX 11i declares gettimeofday. */ +#define dlopen innocuous_dlopen + +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char dlopen (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ + +#ifdef __STDC__ +# include +#else +# include +#endif + +#undef dlopen + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +{ +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char dlopen (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined (__stub_dlopen) || defined (__stub___dlopen) +choke me +#else +char (*f) () = dlopen; +#endif +#ifdef __cplusplus +} +#endif + +int +main () +{ +return f != dlopen; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_func_dlopen=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_func_dlopen=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5 +echo "${ECHO_T}$ac_cv_func_dlopen" >&6 +if test $ac_cv_func_dlopen = yes; then + lt_cv_dlopen="dlopen" +else + echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 +echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6 +if test "${ac_cv_lib_dl_dlopen+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldl $LIBS" +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char dlopen (); +int +main () +{ +dlopen (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_lib_dl_dlopen=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_lib_dl_dlopen=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 +echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6 +if test $ac_cv_lib_dl_dlopen = yes; then + lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" +else + echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5 +echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6 +if test "${ac_cv_lib_svld_dlopen+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lsvld $LIBS" +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char dlopen (); +int +main () +{ +dlopen (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_lib_svld_dlopen=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_lib_svld_dlopen=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5 +echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6 +if test $ac_cv_lib_svld_dlopen = yes; then + lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld" +else + echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5 +echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6 +if test "${ac_cv_lib_dld_dld_link+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldld $LIBS" +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char dld_link (); +int +main () +{ +dld_link (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_lib_dld_dld_link=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_lib_dld_dld_link=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5 +echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6 +if test $ac_cv_lib_dld_dld_link = yes; then + lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld" +fi + + +fi + + +fi + + +fi + + +fi + + +fi + + ;; + esac + + if test "x$lt_cv_dlopen" != xno; then + enable_dlopen=yes + else + enable_dlopen=no + fi + + case $lt_cv_dlopen in + dlopen) + save_CPPFLAGS="$CPPFLAGS" + test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" + + save_LDFLAGS="$LDFLAGS" + eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" + + save_LIBS="$LIBS" + LIBS="$lt_cv_dlopen_libs $LIBS" + + echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5 +echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6 +if test "${lt_cv_dlopen_self+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test "$cross_compiling" = yes; then : + lt_cv_dlopen_self=cross +else + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 + lt_status=$lt_dlunknown + cat > conftest.$ac_ext < +#endif + +#include + +#ifdef RTLD_GLOBAL +# define LT_DLGLOBAL RTLD_GLOBAL +#else +# ifdef DL_GLOBAL +# define LT_DLGLOBAL DL_GLOBAL +# else +# define LT_DLGLOBAL 0 +# endif +#endif + +/* We may have to define LT_DLLAZY_OR_NOW in the command line if we + find out it does not work in some platform. */ +#ifndef LT_DLLAZY_OR_NOW +# ifdef RTLD_LAZY +# define LT_DLLAZY_OR_NOW RTLD_LAZY +# else +# ifdef DL_LAZY +# define LT_DLLAZY_OR_NOW DL_LAZY +# else +# ifdef RTLD_NOW +# define LT_DLLAZY_OR_NOW RTLD_NOW +# else +# ifdef DL_NOW +# define LT_DLLAZY_OR_NOW DL_NOW +# else +# define LT_DLLAZY_OR_NOW 0 +# endif +# endif +# endif +# endif +#endif + +#ifdef __cplusplus +extern "C" void exit (int); +#endif + +void fnord() { int i=42;} +int main () +{ + void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); + int status = $lt_dlunknown; + + if (self) + { + if (dlsym (self,"fnord")) status = $lt_dlno_uscore; + else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; + /* dlclose (self); */ + } + + exit (status); +} +EOF + if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then + (./conftest; exit; ) 2>/dev/null + lt_status=$? + case x$lt_status in + x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;; + x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;; + x$lt_unknown|x*) lt_cv_dlopen_self=no ;; + esac + else : + # compilation failed + lt_cv_dlopen_self=no + fi +fi +rm -fr conftest* + + +fi +echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5 +echo "${ECHO_T}$lt_cv_dlopen_self" >&6 + + if test "x$lt_cv_dlopen_self" = xyes; then + LDFLAGS="$LDFLAGS $link_static_flag" + echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5 +echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6 +if test "${lt_cv_dlopen_self_static+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test "$cross_compiling" = yes; then : + lt_cv_dlopen_self_static=cross +else + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 + lt_status=$lt_dlunknown + cat > conftest.$ac_ext < +#endif + +#include + +#ifdef RTLD_GLOBAL +# define LT_DLGLOBAL RTLD_GLOBAL +#else +# ifdef DL_GLOBAL +# define LT_DLGLOBAL DL_GLOBAL +# else +# define LT_DLGLOBAL 0 +# endif +#endif + +/* We may have to define LT_DLLAZY_OR_NOW in the command line if we + find out it does not work in some platform. */ +#ifndef LT_DLLAZY_OR_NOW +# ifdef RTLD_LAZY +# define LT_DLLAZY_OR_NOW RTLD_LAZY +# else +# ifdef DL_LAZY +# define LT_DLLAZY_OR_NOW DL_LAZY +# else +# ifdef RTLD_NOW +# define LT_DLLAZY_OR_NOW RTLD_NOW +# else +# ifdef DL_NOW +# define LT_DLLAZY_OR_NOW DL_NOW +# else +# define LT_DLLAZY_OR_NOW 0 +# endif +# endif +# endif +# endif +#endif + +#ifdef __cplusplus +extern "C" void exit (int); +#endif + +void fnord() { int i=42;} +int main () +{ + void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); + int status = $lt_dlunknown; + + if (self) + { + if (dlsym (self,"fnord")) status = $lt_dlno_uscore; + else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; + /* dlclose (self); */ + } + + exit (status); +} +EOF + if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then + (./conftest; exit; ) 2>/dev/null + lt_status=$? + case x$lt_status in + x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;; + x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;; + x$lt_unknown|x*) lt_cv_dlopen_self_static=no ;; + esac + else : + # compilation failed + lt_cv_dlopen_self_static=no + fi +fi +rm -fr conftest* + + +fi +echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5 +echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6 + fi + + CPPFLAGS="$save_CPPFLAGS" + LDFLAGS="$save_LDFLAGS" + LIBS="$save_LIBS" + ;; + esac + + case $lt_cv_dlopen_self in + yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; + *) enable_dlopen_self=unknown ;; + esac + + case $lt_cv_dlopen_self_static in + yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; + *) enable_dlopen_self_static=unknown ;; + esac +fi + + +# The else clause should only fire when bootstrapping the +# libtool distribution, otherwise you forgot to ship ltmain.sh +# with your package, and you will get complaints that there are +# no rules to generate ltmain.sh. +if test -f "$ltmain"; then + # See if we are running on zsh, and set the options which allow our commands through + # without removal of \ escapes. + if test -n "${ZSH_VERSION+set}" ; then + setopt NO_GLOB_SUBST + fi + # Now quote all the things that may contain metacharacters while being + # careful not to overquote the AC_SUBSTed values. We take copies of the + # variables and quote the copies for generation of the libtool script. + for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC NM \ + SED SHELL STRIP \ + libname_spec library_names_spec soname_spec extract_expsyms_cmds \ + old_striplib striplib file_magic_cmd finish_cmds finish_eval \ + deplibs_check_method reload_flag reload_cmds need_locks \ + lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \ + lt_cv_sys_global_symbol_to_c_name_address \ + sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ + old_postinstall_cmds old_postuninstall_cmds \ + compiler_CXX \ + CC_CXX \ + LD_CXX \ + lt_prog_compiler_wl_CXX \ + lt_prog_compiler_pic_CXX \ + lt_prog_compiler_static_CXX \ + lt_prog_compiler_no_builtin_flag_CXX \ + export_dynamic_flag_spec_CXX \ + thread_safe_flag_spec_CXX \ + whole_archive_flag_spec_CXX \ + enable_shared_with_static_runtimes_CXX \ + old_archive_cmds_CXX \ + old_archive_from_new_cmds_CXX \ + predep_objects_CXX \ + postdep_objects_CXX \ + predeps_CXX \ + postdeps_CXX \ + compiler_lib_search_path_CXX \ + archive_cmds_CXX \ + archive_expsym_cmds_CXX \ + postinstall_cmds_CXX \ + postuninstall_cmds_CXX \ + old_archive_from_expsyms_cmds_CXX \ + allow_undefined_flag_CXX \ + no_undefined_flag_CXX \ + export_symbols_cmds_CXX \ + hardcode_libdir_flag_spec_CXX \ + hardcode_libdir_flag_spec_ld_CXX \ + hardcode_libdir_separator_CXX \ + hardcode_automatic_CXX \ + module_cmds_CXX \ + module_expsym_cmds_CXX \ + lt_cv_prog_compiler_c_o_CXX \ + exclude_expsyms_CXX \ + include_expsyms_CXX; do + + case $var in + old_archive_cmds_CXX | \ + old_archive_from_new_cmds_CXX | \ + archive_cmds_CXX | \ + archive_expsym_cmds_CXX | \ + module_cmds_CXX | \ + module_expsym_cmds_CXX | \ + old_archive_from_expsyms_cmds_CXX | \ + export_symbols_cmds_CXX | \ + extract_expsyms_cmds | reload_cmds | finish_cmds | \ + postinstall_cmds | postuninstall_cmds | \ + old_postinstall_cmds | old_postuninstall_cmds | \ + sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) + # Double-quote double-evaled strings. + eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" + ;; + *) + eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" + ;; + esac + done + + case $lt_echo in + *'\$0 --fallback-echo"') + lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'` + ;; + esac + +cfgfile="$ofile" + + cat <<__EOF__ >> "$cfgfile" +# ### BEGIN LIBTOOL TAG CONFIG: $tagname + +# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: + +# Shell to use when invoking shell scripts. +SHELL=$lt_SHELL + +# Whether or not to build shared libraries. +build_libtool_libs=$enable_shared + +# Whether or not to build static libraries. +build_old_libs=$enable_static + +# Whether or not to add -lc for building shared libraries. +build_libtool_need_lc=$archive_cmds_need_lc_CXX + +# Whether or not to disallow shared libs when runtime libs are static +allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_CXX + +# Whether or not to optimize for fast installation. +fast_install=$enable_fast_install + +# The host system. +host_alias=$host_alias +host=$host + +# An echo program that does not interpret backslashes. +echo=$lt_echo + +# The archiver. +AR=$lt_AR +AR_FLAGS=$lt_AR_FLAGS + +# A C compiler. +LTCC=$lt_LTCC + +# A language-specific compiler. +CC=$lt_compiler_CXX + +# Is the compiler the GNU C compiler? +with_gcc=$GCC_CXX + +# An ERE matcher. +EGREP=$lt_EGREP + +# The linker used to build libraries. +LD=$lt_LD_CXX + +# Whether we need hard or soft links. +LN_S=$lt_LN_S + +# A BSD-compatible nm program. +NM=$lt_NM + +# A symbol stripping program +STRIP=$lt_STRIP + +# Used to examine libraries when file_magic_cmd begins "file" +MAGIC_CMD=$MAGIC_CMD + +# Used on cygwin: DLL creation program. +DLLTOOL="$DLLTOOL" + +# Used on cygwin: object dumper. +OBJDUMP="$OBJDUMP" + +# Used on cygwin: assembler. +AS="$AS" + +# The name of the directory that contains temporary libtool files. +objdir=$objdir + +# How to create reloadable object files. +reload_flag=$lt_reload_flag +reload_cmds=$lt_reload_cmds + +# How to pass a linker flag through the compiler. +wl=$lt_lt_prog_compiler_wl_CXX + +# Object file suffix (normally "o"). +objext="$ac_objext" + +# Old archive suffix (normally "a"). +libext="$libext" + +# Shared library suffix (normally ".so"). +shrext_cmds='$shrext_cmds' + +# Executable file suffix (normally ""). +exeext="$exeext" + +# Additional compiler flags for building library objects. +pic_flag=$lt_lt_prog_compiler_pic_CXX +pic_mode=$pic_mode + +# What is the maximum length of a command? +max_cmd_len=$lt_cv_sys_max_cmd_len + +# Does compiler simultaneously support -c and -o options? +compiler_c_o=$lt_lt_cv_prog_compiler_c_o_CXX + +# Must we lock files when doing compilation ? +need_locks=$lt_need_locks + +# Do we need the lib prefix for modules? +need_lib_prefix=$need_lib_prefix + +# Do we need a version for libraries? +need_version=$need_version + +# Whether dlopen is supported. +dlopen_support=$enable_dlopen + +# Whether dlopen of programs is supported. +dlopen_self=$enable_dlopen_self + +# Whether dlopen of statically linked programs is supported. +dlopen_self_static=$enable_dlopen_self_static + +# Compiler flag to prevent dynamic linking. +link_static_flag=$lt_lt_prog_compiler_static_CXX + +# Compiler flag to turn off builtin functions. +no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_CXX + +# Compiler flag to allow reflexive dlopens. +export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_CXX + +# Compiler flag to generate shared objects directly from archives. +whole_archive_flag_spec=$lt_whole_archive_flag_spec_CXX + +# Compiler flag to generate thread-safe objects. +thread_safe_flag_spec=$lt_thread_safe_flag_spec_CXX + +# Library versioning type. +version_type=$version_type + +# Format of library name prefix. +libname_spec=$lt_libname_spec + +# List of archive names. First name is the real one, the rest are links. +# The last name is the one that the linker finds with -lNAME. +library_names_spec=$lt_library_names_spec + +# The coded name of the library, if different from the real name. +soname_spec=$lt_soname_spec + +# Commands used to build and install an old-style archive. +RANLIB=$lt_RANLIB +old_archive_cmds=$lt_old_archive_cmds_CXX +old_postinstall_cmds=$lt_old_postinstall_cmds +old_postuninstall_cmds=$lt_old_postuninstall_cmds + +# Create an old-style archive from a shared archive. +old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_CXX + +# Create a temporary old-style archive to link instead of a shared archive. +old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_CXX + +# Commands used to build and install a shared archive. +archive_cmds=$lt_archive_cmds_CXX +archive_expsym_cmds=$lt_archive_expsym_cmds_CXX +postinstall_cmds=$lt_postinstall_cmds +postuninstall_cmds=$lt_postuninstall_cmds + +# Commands used to build a loadable module (assumed same as above if empty) +module_cmds=$lt_module_cmds_CXX +module_expsym_cmds=$lt_module_expsym_cmds_CXX + +# Commands to strip libraries. +old_striplib=$lt_old_striplib +striplib=$lt_striplib + +# Dependencies to place before the objects being linked to create a +# shared library. +predep_objects=$lt_predep_objects_CXX + +# Dependencies to place after the objects being linked to create a +# shared library. +postdep_objects=$lt_postdep_objects_CXX + +# Dependencies to place before the objects being linked to create a +# shared library. +predeps=$lt_predeps_CXX + +# Dependencies to place after the objects being linked to create a +# shared library. +postdeps=$lt_postdeps_CXX + +# The library search path used internally by the compiler when linking +# a shared library. +compiler_lib_search_path=$lt_compiler_lib_search_path_CXX + +# Method to check whether dependent libraries are shared objects. +deplibs_check_method=$lt_deplibs_check_method + +# Command to use when deplibs_check_method == file_magic. +file_magic_cmd=$lt_file_magic_cmd + +# Flag that allows shared libraries with undefined symbols to be built. +allow_undefined_flag=$lt_allow_undefined_flag_CXX + +# Flag that forces no undefined symbols. +no_undefined_flag=$lt_no_undefined_flag_CXX + +# Commands used to finish a libtool library installation in a directory. +finish_cmds=$lt_finish_cmds + +# Same as above, but a single script fragment to be evaled but not shown. +finish_eval=$lt_finish_eval + +# Take the output of nm and produce a listing of raw symbols and C names. +global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe + +# Transform the output of nm in a proper C declaration +global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl + +# Transform the output of nm in a C name address pair +global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address + +# This is the shared library runtime path variable. +runpath_var=$runpath_var + +# This is the shared library path variable. +shlibpath_var=$shlibpath_var + +# Is shlibpath searched before the hard-coded library search path? +shlibpath_overrides_runpath=$shlibpath_overrides_runpath + +# How to hardcode a shared library path into an executable. +hardcode_action=$hardcode_action_CXX + +# Whether we should hardcode library paths into libraries. +hardcode_into_libs=$hardcode_into_libs + +# Flag to hardcode \$libdir into a binary during linking. +# This must work even if \$libdir does not exist. +hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_CXX + +# If ld is used when linking, flag to hardcode \$libdir into +# a binary during linking. This must work even if \$libdir does +# not exist. +hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_CXX + +# Whether we need a single -rpath flag with a separated argument. +hardcode_libdir_separator=$lt_hardcode_libdir_separator_CXX + +# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the +# resulting binary. +hardcode_direct=$hardcode_direct_CXX + +# Set to yes if using the -LDIR flag during linking hardcodes DIR into the +# resulting binary. +hardcode_minus_L=$hardcode_minus_L_CXX + +# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into +# the resulting binary. +hardcode_shlibpath_var=$hardcode_shlibpath_var_CXX + +# Set to yes if building a shared library automatically hardcodes DIR into the library +# and all subsequent libraries and executables linked against it. +hardcode_automatic=$hardcode_automatic_CXX + +# Variables whose values should be saved in libtool wrapper scripts and +# restored at relink time. +variables_saved_for_relink="$variables_saved_for_relink" + +# Whether libtool must link a program against all its dependency libraries. +link_all_deplibs=$link_all_deplibs_CXX + +# Compile-time system search path for libraries +sys_lib_search_path_spec=$lt_sys_lib_search_path_spec + +# Run-time system search path for libraries +sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec + +# Fix the shell variable \$srcfile for the compiler. +fix_srcfile_path="$fix_srcfile_path_CXX" + +# Set to yes if exported symbols are required. +always_export_symbols=$always_export_symbols_CXX + +# The commands to list exported symbols. +export_symbols_cmds=$lt_export_symbols_cmds_CXX + +# The commands to extract the exported symbol list from a shared archive. +extract_expsyms_cmds=$lt_extract_expsyms_cmds + +# Symbols that should not be listed in the preloaded symbols. +exclude_expsyms=$lt_exclude_expsyms_CXX + +# Symbols that must always be exported. +include_expsyms=$lt_include_expsyms_CXX + +# ### END LIBTOOL TAG CONFIG: $tagname + +__EOF__ + + +else + # If there is no Makefile yet, we rely on a make rule to execute + # `config.status --recheck' to rerun these tests and create the + # libtool script then. + ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` + if test -f "$ltmain_in"; then + test -f Makefile && make "$ltmain" + fi +fi + + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + +CC=$lt_save_CC +LDCXX=$LD +LD=$lt_save_LD +GCC=$lt_save_GCC +with_gnu_ldcxx=$with_gnu_ld +with_gnu_ld=$lt_save_with_gnu_ld +lt_cv_path_LDCXX=$lt_cv_path_LD +lt_cv_path_LD=$lt_save_path_LD +lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld +lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld + + else + tagname="" + fi + ;; + + F77) + if test -n "$F77" && test "X$F77" != "Xno"; then + +ac_ext=f +ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5' +ac_link='$F77 -o conftest$ac_exeext $FFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_f77_compiler_gnu + + +archive_cmds_need_lc_F77=no +allow_undefined_flag_F77= +always_export_symbols_F77=no +archive_expsym_cmds_F77= +export_dynamic_flag_spec_F77= +hardcode_direct_F77=no +hardcode_libdir_flag_spec_F77= +hardcode_libdir_flag_spec_ld_F77= +hardcode_libdir_separator_F77= +hardcode_minus_L_F77=no +hardcode_automatic_F77=no +module_cmds_F77= +module_expsym_cmds_F77= +link_all_deplibs_F77=unknown +old_archive_cmds_F77=$old_archive_cmds +no_undefined_flag_F77= +whole_archive_flag_spec_F77= +enable_shared_with_static_runtimes_F77=no + +# Source file extension for f77 test sources. +ac_ext=f + +# Object file extension for compiled f77 test sources. +objext=o +objext_F77=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code=" subroutine t\n return\n end\n" + +# Code to be used in simple link tests +lt_simple_link_test_code=" program t\n end\n" + +# ltmain only uses $CC for tagged configurations so make sure $CC is set. + +# If no C compiler was specified, use CC. +LTCC=${LTCC-"$CC"} + +# Allow CC to be a program name with arguments. +compiler=$CC + + +# Allow CC to be a program name with arguments. +lt_save_CC="$CC" +CC=${F77-"f77"} +compiler=$CC +compiler_F77=$CC +cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'` + +echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5 +echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6 +echo "$as_me:$LINENO: result: $can_build_shared" >&5 +echo "${ECHO_T}$can_build_shared" >&6 + +echo "$as_me:$LINENO: checking whether to build shared libraries" >&5 +echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6 +test "$can_build_shared" = "no" && enable_shared=no + +# On AIX, shared libraries and static libraries use the same namespace, and +# are all built from PIC. +case "$host_os" in +aix3*) + test "$enable_shared" = yes && enable_static=no + if test -n "$RANLIB"; then + archive_cmds="$archive_cmds~\$RANLIB \$lib" + postinstall_cmds='$RANLIB $lib' + fi + ;; +aix4* | aix5*) + test "$enable_shared" = yes && enable_static=no + ;; +esac +echo "$as_me:$LINENO: result: $enable_shared" >&5 +echo "${ECHO_T}$enable_shared" >&6 + +echo "$as_me:$LINENO: checking whether to build static libraries" >&5 +echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6 +# Make sure either enable_shared or enable_static is yes. +test "$enable_shared" = yes || enable_static=yes +echo "$as_me:$LINENO: result: $enable_static" >&5 +echo "${ECHO_T}$enable_static" >&6 + +test "$ld_shlibs_F77" = no && can_build_shared=no + +GCC_F77="$G77" +LD_F77="$LD" + +lt_prog_compiler_wl_F77= +lt_prog_compiler_pic_F77= +lt_prog_compiler_static_F77= + +echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 +echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6 + + if test "$GCC" = yes; then + lt_prog_compiler_wl_F77='-Wl,' + lt_prog_compiler_static_F77='-static' + + case $host_os in + aix*) + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + lt_prog_compiler_static_F77='-Bstatic' + fi + ;; + + amigaos*) + # FIXME: we need at least 68020 code to build shared libraries, but + # adding the `-m68020' flag to GCC prevents building anything better, + # like `-m68040'. + lt_prog_compiler_pic_F77='-m68020 -resident32 -malways-restore-a4' + ;; + + beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) + # PIC is the default for these OSes. + ;; + + mingw* | pw32* | os2*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + lt_prog_compiler_pic_F77='-DDLL_EXPORT' + ;; + + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + lt_prog_compiler_pic_F77='-fno-common' + ;; + + msdosdjgpp*) + # Just because we use GCC doesn't mean we suddenly get shared libraries + # on systems that don't support them. + lt_prog_compiler_can_build_shared_F77=no + enable_shared=no + ;; + + sysv4*MP*) + if test -d /usr/nec; then + lt_prog_compiler_pic_F77=-Kconform_pic + fi + ;; + + hpux*) + # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but + # not for PA HP-UX. + case "$host_cpu" in + hppa*64*|ia64*) + # +Z the default + ;; + *) + lt_prog_compiler_pic_F77='-fPIC' + ;; + esac + ;; + + *) + lt_prog_compiler_pic_F77='-fPIC' + ;; + esac + else + # PORTME Check for flag to pass linker flags through the system compiler. + case $host_os in + aix*) + lt_prog_compiler_wl_F77='-Wl,' + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + lt_prog_compiler_static_F77='-Bstatic' + else + lt_prog_compiler_static_F77='-bnso -bI:/lib/syscalls.exp' + fi + ;; + + mingw* | pw32* | os2*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + lt_prog_compiler_pic_F77='-DDLL_EXPORT' + ;; + + hpux9* | hpux10* | hpux11*) + lt_prog_compiler_wl_F77='-Wl,' + # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but + # not for PA HP-UX. + case "$host_cpu" in + hppa*64*|ia64*) + # +Z the default + ;; + *) + lt_prog_compiler_pic_F77='+Z' + ;; + esac + # Is there a better lt_prog_compiler_static that works with the bundled CC? + lt_prog_compiler_static_F77='${wl}-a ${wl}archive' + ;; + + irix5* | irix6* | nonstopux*) + lt_prog_compiler_wl_F77='-Wl,' + # PIC (with -KPIC) is the default. + lt_prog_compiler_static_F77='-non_shared' + ;; + + newsos6) + lt_prog_compiler_pic_F77='-KPIC' + lt_prog_compiler_static_F77='-Bstatic' + ;; + + linux*) + case $CC in + icc* | ecc*) + lt_prog_compiler_wl_F77='-Wl,' + lt_prog_compiler_pic_F77='-KPIC' + lt_prog_compiler_static_F77='-static' + ;; + ccc*) + lt_prog_compiler_wl_F77='-Wl,' + # All Alpha code is PIC. + lt_prog_compiler_static_F77='-non_shared' + ;; + esac + ;; + + osf3* | osf4* | osf5*) + lt_prog_compiler_wl_F77='-Wl,' + # All OSF/1 code is PIC. + lt_prog_compiler_static_F77='-non_shared' + ;; + + sco3.2v5*) + lt_prog_compiler_pic_F77='-Kpic' + lt_prog_compiler_static_F77='-dn' + ;; + + solaris*) + lt_prog_compiler_wl_F77='-Wl,' + lt_prog_compiler_pic_F77='-KPIC' + lt_prog_compiler_static_F77='-Bstatic' + ;; + + sunos4*) + lt_prog_compiler_wl_F77='-Qoption ld ' + lt_prog_compiler_pic_F77='-PIC' + lt_prog_compiler_static_F77='-Bstatic' + ;; + + sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + lt_prog_compiler_wl_F77='-Wl,' + lt_prog_compiler_pic_F77='-KPIC' + lt_prog_compiler_static_F77='-Bstatic' + ;; + + sysv4*MP*) + if test -d /usr/nec ;then + lt_prog_compiler_pic_F77='-Kconform_pic' + lt_prog_compiler_static_F77='-Bstatic' + fi + ;; + + uts4*) + lt_prog_compiler_pic_F77='-pic' + lt_prog_compiler_static_F77='-Bstatic' + ;; + + *) + lt_prog_compiler_can_build_shared_F77=no + ;; + esac + fi + +echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_F77" >&5 +echo "${ECHO_T}$lt_prog_compiler_pic_F77" >&6 + +# +# Check to make sure the PIC flag actually works. +# +if test -n "$lt_prog_compiler_pic_F77"; then + +echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_F77 works" >&5 +echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_F77 works... $ECHO_C" >&6 +if test "${lt_prog_compiler_pic_works_F77+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + lt_prog_compiler_pic_works_F77=no + ac_outfile=conftest.$ac_objext + printf "$lt_simple_compile_test_code" > conftest.$ac_ext + lt_compiler_flag="$lt_prog_compiler_pic_F77" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + # The option is referenced via a variable to avoid confusing sed. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:13007: $lt_compile\"" >&5) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&5 + echo "$as_me:13011: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + if test ! -s conftest.err; then + lt_prog_compiler_pic_works_F77=yes + fi + fi + $rm conftest* + +fi +echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works_F77" >&5 +echo "${ECHO_T}$lt_prog_compiler_pic_works_F77" >&6 + +if test x"$lt_prog_compiler_pic_works_F77" = xyes; then + case $lt_prog_compiler_pic_F77 in + "" | " "*) ;; + *) lt_prog_compiler_pic_F77=" $lt_prog_compiler_pic_F77" ;; + esac +else + lt_prog_compiler_pic_F77= + lt_prog_compiler_can_build_shared_F77=no +fi + +fi +case "$host_os" in + # For platforms which do not support PIC, -DPIC is meaningless: + *djgpp*) + lt_prog_compiler_pic_F77= + ;; + *) + lt_prog_compiler_pic_F77="$lt_prog_compiler_pic_F77" + ;; +esac + +echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 +echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6 +if test "${lt_cv_prog_compiler_c_o_F77+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + lt_cv_prog_compiler_c_o_F77=no + $rm -r conftest 2>/dev/null + mkdir conftest + cd conftest + mkdir out + printf "$lt_simple_compile_test_code" > conftest.$ac_ext + + lt_compiler_flag="-o out/conftest2.$ac_objext" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:13067: $lt_compile\"" >&5) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&5 + echo "$as_me:13071: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + if test ! -s out/conftest.err; then + lt_cv_prog_compiler_c_o_F77=yes + fi + fi + chmod u+w . + $rm conftest* + # SGI C++ compiler will create directory out/ii_files/ for + # template instantiation + test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files + $rm out/* && rmdir out + cd .. + rmdir conftest + $rm conftest* + +fi +echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_F77" >&5 +echo "${ECHO_T}$lt_cv_prog_compiler_c_o_F77" >&6 + + +hard_links="nottested" +if test "$lt_cv_prog_compiler_c_o_F77" = no && test "$need_locks" != no; then + # do not overwrite the value of need_locks provided by the user + echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 +echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6 + hard_links=yes + $rm conftest* + ln conftest.a conftest.b 2>/dev/null && hard_links=no + touch conftest.a + ln conftest.a conftest.b 2>&5 || hard_links=no + ln conftest.a conftest.b 2>/dev/null && hard_links=no + echo "$as_me:$LINENO: result: $hard_links" >&5 +echo "${ECHO_T}$hard_links" >&6 + if test "$hard_links" = no; then + { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 +echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} + need_locks=warn + fi +else + need_locks=no +fi + +echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 +echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6 + + runpath_var= + allow_undefined_flag_F77= + enable_shared_with_static_runtimes_F77=no + archive_cmds_F77= + archive_expsym_cmds_F77= + old_archive_From_new_cmds_F77= + old_archive_from_expsyms_cmds_F77= + export_dynamic_flag_spec_F77= + whole_archive_flag_spec_F77= + thread_safe_flag_spec_F77= + hardcode_libdir_flag_spec_F77= + hardcode_libdir_flag_spec_ld_F77= + hardcode_libdir_separator_F77= + hardcode_direct_F77=no + hardcode_minus_L_F77=no + hardcode_shlibpath_var_F77=unsupported + link_all_deplibs_F77=unknown + hardcode_automatic_F77=no + module_cmds_F77= + module_expsym_cmds_F77= + always_export_symbols_F77=no + export_symbols_cmds_F77='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + # include_expsyms should be a list of space-separated symbols to be *always* + # included in the symbol list + include_expsyms_F77= + # exclude_expsyms can be an extended regexp of symbols to exclude + # it will be wrapped by ` (' and `)$', so one must not match beginning or + # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', + # as well as any symbol that contains `d'. + exclude_expsyms_F77="_GLOBAL_OFFSET_TABLE_" + # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out + # platforms (ab)use it in PIC code, but their linkers get confused if + # the symbol is explicitly referenced. Since portable code cannot + # rely on this symbol name, it's probably fine to never include it in + # preloaded symbol tables. + extract_expsyms_cmds= + + case $host_os in + cygwin* | mingw* | pw32*) + # FIXME: the MSVC++ port hasn't been tested in a loooong time + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + if test "$GCC" != yes; then + with_gnu_ld=no + fi + ;; + openbsd*) + with_gnu_ld=no + ;; + esac + + ld_shlibs_F77=yes + if test "$with_gnu_ld" = yes; then + # If archive_cmds runs LD, not CC, wlarc should be empty + wlarc='${wl}' + + # See if GNU ld supports shared libraries. + case $host_os in + aix3* | aix4* | aix5*) + # On AIX/PPC, the GNU linker is very broken + if test "$host_cpu" != ia64; then + ld_shlibs_F77=no + cat <&2 + +*** Warning: the GNU linker, at least up to release 2.9.1, is reported +*** to be unable to reliably create shared libraries on AIX. +*** Therefore, libtool is disabling shared libraries support. If you +*** really care for shared libraries, you may want to modify your PATH +*** so that a non-GNU linker is found, and then restart. + +EOF + fi + ;; + + amigaos*) + archive_cmds_F77='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + hardcode_libdir_flag_spec_F77='-L$libdir' + hardcode_minus_L_F77=yes + + # Samuel A. Falvo II reports + # that the semantics of dynamic libraries on AmigaOS, at least up + # to version 4, is to share data among multiple programs linked + # with the same dynamic library. Since this doesn't match the + # behavior of shared libraries on other platforms, we can't use + # them. + ld_shlibs_F77=no + ;; + + beos*) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + allow_undefined_flag_F77=unsupported + # Joseph Beckenbach says some releases of gcc + # support --undefined. This deserves some investigation. FIXME + archive_cmds_F77='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + else + ld_shlibs_F77=no + fi + ;; + + cygwin* | mingw* | pw32*) + # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, F77) is actually meaningless, + # as there is no search path for DLLs. + hardcode_libdir_flag_spec_F77='-L$libdir' + allow_undefined_flag_F77=unsupported + always_export_symbols_F77=no + enable_shared_with_static_runtimes_F77=yes + export_symbols_cmds_F77='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGS] /s/.* \([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols' + + if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then + archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' + # If the export-symbols file already is a .def file (1st line + # is EXPORTS), use it as is; otherwise, prepend... + archive_expsym_cmds_F77='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then + cp $export_symbols $output_objdir/$soname.def; + else + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ + $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' + else + ld_shlibs=no + fi + ;; + + netbsd* | knetbsd*-gnu) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + archive_cmds_F77='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' + wlarc= + else + archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + fi + ;; + + solaris* | sysv5*) + if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then + ld_shlibs_F77=no + cat <&2 + +*** Warning: The releases 2.8.* of the GNU linker cannot reliably +*** create shared libraries on Solaris systems. Therefore, libtool +*** is disabling shared libraries support. We urge you to upgrade GNU +*** binutils to release 2.9.1 or newer. Another option is to modify +*** your PATH or compiler configuration so that the native linker is +*** used, and then restart. + +EOF + elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs_F77=no + fi + ;; + + sunos4*) + archive_cmds_F77='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' + wlarc= + hardcode_direct_F77=yes + hardcode_shlibpath_var_F77=no + ;; + + linux*) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + tmp_archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_cmds_F77="$tmp_archive_cmds" + supports_anon_versioning=no + case `$LD -v 2>/dev/null` in + *\ 01.* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 + *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... + *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... + *\ 2.11.*) ;; # other 2.11 versions + *) supports_anon_versioning=yes ;; + esac + if test $supports_anon_versioning = yes; then + archive_expsym_cmds_F77='$echo "{ global:" > $output_objdir/$libname.ver~ +cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ +$echo "local: *; };" >> $output_objdir/$libname.ver~ + $CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' + else + archive_expsym_cmds_F77="$tmp_archive_cmds" + fi + link_all_deplibs_F77=no + else + ld_shlibs_F77=no + fi + ;; + + *) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs_F77=no + fi + ;; + esac + + if test "$ld_shlibs_F77" = yes; then + runpath_var=LD_RUN_PATH + hardcode_libdir_flag_spec_F77='${wl}--rpath ${wl}$libdir' + export_dynamic_flag_spec_F77='${wl}--export-dynamic' + # ancient GNU ld didn't support --whole-archive et. al. + if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then + whole_archive_flag_spec_F77="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + else + whole_archive_flag_spec_F77= + fi + fi + else + # PORTME fill in a description of your system's linker (not GNU ld) + case $host_os in + aix3*) + allow_undefined_flag_F77=unsupported + always_export_symbols_F77=yes + archive_expsym_cmds_F77='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' + # Note: this linker hardcodes the directories in LIBPATH if there + # are no directories specified by -L. + hardcode_minus_L_F77=yes + if test "$GCC" = yes && test -z "$link_static_flag"; then + # Neither direct hardcoding nor static linking is supported with a + # broken collect2. + hardcode_direct_F77=unsupported + fi + ;; + + aix4* | aix5*) + if test "$host_cpu" = ia64; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. + aix_use_runtimelinking=no + exp_sym_flag='-Bexport' + no_entry_flag="" + else + # If we're using GNU nm, then we don't want the "-C" option. + # -C means demangle to AIX nm, but means don't demangle with GNU nm + if $NM -V 2>&1 | grep 'GNU' > /dev/null; then + export_symbols_cmds_F77='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' + else + export_symbols_cmds_F77='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' + fi + aix_use_runtimelinking=no + + # Test if we are trying to use run time linking or normal + # AIX style linking. If -brtl is somewhere in LDFLAGS, we + # need to do runtime linking. + case $host_os in aix4.[23]|aix4.[23].*|aix5*) + for ld_flag in $LDFLAGS; do + if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then + aix_use_runtimelinking=yes + break + fi + done + esac + + exp_sym_flag='-bexport' + no_entry_flag='-bnoentry' + fi + + # When large executables or shared objects are built, AIX ld can + # have problems creating the table of contents. If linking a library + # or program results in "error TOC overflow" add -mminimal-toc to + # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not + # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. + + archive_cmds_F77='' + hardcode_direct_F77=yes + hardcode_libdir_separator_F77=':' + link_all_deplibs_F77=yes + + if test "$GCC" = yes; then + case $host_os in aix4.012|aix4.012.*) + # We only want to do this on AIX 4.2 and lower, the check + # below for broken collect2 doesn't work under 4.3+ + collect2name=`${CC} -print-prog-name=collect2` + if test -f "$collect2name" && \ + strings "$collect2name" | grep resolve_lib_name >/dev/null + then + # We have reworked collect2 + hardcode_direct_F77=yes + else + # We have old collect2 + hardcode_direct_F77=unsupported + # It fails to find uninstalled libraries when the uninstalled + # path is not listed in the libpath. Setting hardcode_minus_L + # to unsupported forces relinking + hardcode_minus_L_F77=yes + hardcode_libdir_flag_spec_F77='-L$libdir' + hardcode_libdir_separator_F77= + fi + esac + shared_flag='-shared' + else + # not using gcc + if test "$host_cpu" = ia64; then + # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release + # chokes on -Wl,-G. The following line is correct: + shared_flag='-G' + else + if test "$aix_use_runtimelinking" = yes; then + shared_flag='${wl}-G' + else + shared_flag='${wl}-bM:SRE' + fi + fi + fi + + # It seems that -bexpall does not export symbols beginning with + # underscore (_), so it is better to generate a list of symbols to export. + always_export_symbols_F77=yes + if test "$aix_use_runtimelinking" = yes; then + # Warning - without using the other runtime loading flags (-brtl), + # -berok will link without error, but may produce a broken library. + allow_undefined_flag_F77='-berok' + # Determine the default libpath from the value encoded in an empty executable. + cat >conftest.$ac_ext <<_ACEOF + program main + + end +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_f77_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + +aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } +}'` +# Check for a 64-bit object if we didn't find anything. +if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } +}'`; fi +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + + hardcode_libdir_flag_spec_F77='${wl}-blibpath:$libdir:'"$aix_libpath" + archive_expsym_cmds_F77="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag" + else + if test "$host_cpu" = ia64; then + hardcode_libdir_flag_spec_F77='${wl}-R $libdir:/usr/lib:/lib' + allow_undefined_flag_F77="-z nodefs" + archive_expsym_cmds_F77="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" + else + # Determine the default libpath from the value encoded in an empty executable. + cat >conftest.$ac_ext <<_ACEOF + program main + + end +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_f77_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + +aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } +}'` +# Check for a 64-bit object if we didn't find anything. +if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } +}'`; fi +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + + hardcode_libdir_flag_spec_F77='${wl}-blibpath:$libdir:'"$aix_libpath" + # Warning - without using the other run time loading flags, + # -berok will link without error, but may produce a broken library. + no_undefined_flag_F77=' ${wl}-bernotok' + allow_undefined_flag_F77=' ${wl}-berok' + # -bexpall does not export symbols beginning with underscore (_) + always_export_symbols_F77=yes + # Exported symbols can be pulled into shared objects from archives + whole_archive_flag_spec_F77=' ' + archive_cmds_need_lc_F77=yes + # This is similar to how AIX traditionally builds it's shared libraries. + archive_expsym_cmds_F77="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + fi + fi + ;; + + amigaos*) + archive_cmds_F77='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + hardcode_libdir_flag_spec_F77='-L$libdir' + hardcode_minus_L_F77=yes + # see comment about different semantics on the GNU ld section + ld_shlibs_F77=no + ;; + + bsdi4*) + export_dynamic_flag_spec_F77=-rdynamic + ;; + + cygwin* | mingw* | pw32*) + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + hardcode_libdir_flag_spec_F77=' ' + allow_undefined_flag_F77=unsupported + # Tell ltmain to make .lib files, not .a files. + libext=lib + # Tell ltmain to make .dll files, not .so files. + shrext_cmds=".dll" + # FIXME: Setting linknames here is a bad hack. + archive_cmds_F77='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames=' + # The linker will automatically build a .lib file if we build a DLL. + old_archive_From_new_cmds_F77='true' + # FIXME: Should let the user specify the lib program. + old_archive_cmds_F77='lib /OUT:$oldlib$oldobjs$old_deplibs' + fix_srcfile_path='`cygpath -w "$srcfile"`' + enable_shared_with_static_runtimes_F77=yes + ;; + + darwin* | rhapsody*) + if test "$GXX" = yes ; then + archive_cmds_need_lc_F77=no + case "$host_os" in + rhapsody* | darwin1.[012]) + allow_undefined_flag_F77='-undefined suppress' + ;; + *) # Darwin 1.3 on + if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then + allow_undefined_flag_F77='-flat_namespace -undefined suppress' + else + case ${MACOSX_DEPLOYMENT_TARGET} in + 10.[012]) + allow_undefined_flag_F77='-flat_namespace -undefined suppress' + ;; + 10.*) + allow_undefined_flag_F77='-undefined dynamic_lookup' + ;; + esac + fi + ;; + esac + lt_int_apple_cc_single_mod=no + output_verbose_link_cmd='echo' + if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then + lt_int_apple_cc_single_mod=yes + fi + if test "X$lt_int_apple_cc_single_mod" = Xyes ; then + archive_cmds_F77='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring' + else + archive_cmds_F77='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring' + fi + module_cmds_F77='$CC ${wl}-bind_at_load $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' + # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's + if test "X$lt_int_apple_cc_single_mod" = Xyes ; then + archive_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + else + archive_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + fi + module_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + hardcode_direct_F77=no + hardcode_automatic_F77=yes + hardcode_shlibpath_var_F77=unsupported + whole_archive_flag_spec_F77='-all_load $convenience' + link_all_deplibs_F77=yes + else + ld_shlibs_F77=no + fi + ;; + + dgux*) + archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec_F77='-L$libdir' + hardcode_shlibpath_var_F77=no + ;; + + freebsd1*) + ld_shlibs_F77=no + ;; + + # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor + # support. Future versions do this automatically, but an explicit c++rt0.o + # does not break anything, and helps significantly (at the cost of a little + # extra space). + freebsd2.2*) + archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' + hardcode_libdir_flag_spec_F77='-R$libdir' + hardcode_direct_F77=yes + hardcode_shlibpath_var_F77=no + ;; + + # Unfortunately, older versions of FreeBSD 2 do not have this feature. + freebsd2*) + archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct_F77=yes + hardcode_minus_L_F77=yes + hardcode_shlibpath_var_F77=no + ;; + + # FreeBSD 3 and greater uses gcc -shared to do shared libraries. + freebsd* | kfreebsd*-gnu) + archive_cmds_F77='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' + hardcode_libdir_flag_spec_F77='-R$libdir' + hardcode_direct_F77=yes + hardcode_shlibpath_var_F77=no + ;; + + hpux9*) + if test "$GCC" = yes; then + archive_cmds_F77='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + else + archive_cmds_F77='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + fi + hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir' + hardcode_libdir_separator_F77=: + hardcode_direct_F77=yes + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L_F77=yes + export_dynamic_flag_spec_F77='${wl}-E' + ;; + + hpux10* | hpux11*) + if test "$GCC" = yes -a "$with_gnu_ld" = no; then + case "$host_cpu" in + hppa*64*|ia64*) + archive_cmds_F77='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + archive_cmds_F77='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + else + case "$host_cpu" in + hppa*64*|ia64*) + archive_cmds_F77='$LD -b +h $soname -o $lib $libobjs $deplibs $linker_flags' + ;; + *) + archive_cmds_F77='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' + ;; + esac + fi + if test "$with_gnu_ld" = no; then + case "$host_cpu" in + hppa*64*) + hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir' + hardcode_libdir_flag_spec_ld_F77='+b $libdir' + hardcode_libdir_separator_F77=: + hardcode_direct_F77=no + hardcode_shlibpath_var_F77=no + ;; + ia64*) + hardcode_libdir_flag_spec_F77='-L$libdir' + hardcode_direct_F77=no + hardcode_shlibpath_var_F77=no + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L_F77=yes + ;; + *) + hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir' + hardcode_libdir_separator_F77=: + hardcode_direct_F77=yes + export_dynamic_flag_spec_F77='${wl}-E' + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L_F77=yes + ;; + esac + fi + ;; + + irix5* | irix6* | nonstopux*) + if test "$GCC" = yes; then + archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + else + archive_cmds_F77='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + hardcode_libdir_flag_spec_ld_F77='-rpath $libdir' + fi + hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator_F77=: + link_all_deplibs_F77=yes + ;; + + netbsd* | knetbsd*-gnu) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out + else + archive_cmds_F77='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF + fi + hardcode_libdir_flag_spec_F77='-R$libdir' + hardcode_direct_F77=yes + hardcode_shlibpath_var_F77=no + ;; + + newsos6) + archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct_F77=yes + hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator_F77=: + hardcode_shlibpath_var_F77=no + ;; + + openbsd*) + hardcode_direct_F77=yes + hardcode_shlibpath_var_F77=no + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + archive_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir' + export_dynamic_flag_spec_F77='${wl}-E' + else + case $host_os in + openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) + archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec_F77='-R$libdir' + ;; + *) + archive_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir' + ;; + esac + fi + ;; + + os2*) + hardcode_libdir_flag_spec_F77='-L$libdir' + hardcode_minus_L_F77=yes + allow_undefined_flag_F77=unsupported + archive_cmds_F77='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' + old_archive_From_new_cmds_F77='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' + ;; + + osf3*) + if test "$GCC" = yes; then + allow_undefined_flag_F77=' ${wl}-expect_unresolved ${wl}\*' + archive_cmds_F77='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + else + allow_undefined_flag_F77=' -expect_unresolved \*' + archive_cmds_F77='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + fi + hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator_F77=: + ;; + + osf4* | osf5*) # as osf3* with the addition of -msym flag + if test "$GCC" = yes; then + allow_undefined_flag_F77=' ${wl}-expect_unresolved ${wl}\*' + archive_cmds_F77='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir' + else + allow_undefined_flag_F77=' -expect_unresolved \*' + archive_cmds_F77='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + archive_expsym_cmds_F77='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ + $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp' + + # Both c and cxx compiler support -rpath directly + hardcode_libdir_flag_spec_F77='-rpath $libdir' + fi + hardcode_libdir_separator_F77=: + ;; + + sco3.2v5*) + archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_shlibpath_var_F77=no + export_dynamic_flag_spec_F77='${wl}-Bexport' + runpath_var=LD_RUN_PATH + hardcode_runpath_var=yes + ;; + + solaris*) + no_undefined_flag_F77=' -z text' + if test "$GCC" = yes; then + archive_cmds_F77='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds_F77='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp' + else + archive_cmds_F77='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' + archive_expsym_cmds_F77='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' + fi + hardcode_libdir_flag_spec_F77='-R$libdir' + hardcode_shlibpath_var_F77=no + case $host_os in + solaris2.[0-5] | solaris2.[0-5].*) ;; + *) # Supported since Solaris 2.6 (maybe 2.5.1?) + whole_archive_flag_spec_F77='-z allextract$convenience -z defaultextract' ;; + esac + link_all_deplibs_F77=yes + ;; + + sunos4*) + if test "x$host_vendor" = xsequent; then + # Use $CC to link under sequent, because it throws in some extra .o + # files that make .init and .fini sections work. + archive_cmds_F77='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds_F77='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' + fi + hardcode_libdir_flag_spec_F77='-L$libdir' + hardcode_direct_F77=yes + hardcode_minus_L_F77=yes + hardcode_shlibpath_var_F77=no + ;; + + sysv4) + case $host_vendor in + sni) + archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct_F77=yes # is this really true??? + ;; + siemens) + ## LD is ld it makes a PLAMLIB + ## CC just makes a GrossModule. + archive_cmds_F77='$LD -G -o $lib $libobjs $deplibs $linker_flags' + reload_cmds_F77='$CC -r -o $output$reload_objs' + hardcode_direct_F77=no + ;; + motorola) + archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct_F77=no #Motorola manual says yes, but my tests say they lie + ;; + esac + runpath_var='LD_RUN_PATH' + hardcode_shlibpath_var_F77=no + ;; + + sysv4.3*) + archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_shlibpath_var_F77=no + export_dynamic_flag_spec_F77='-Bexport' + ;; + + sysv4*MP*) + if test -d /usr/nec; then + archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_shlibpath_var_F77=no + runpath_var=LD_RUN_PATH + hardcode_runpath_var=yes + ld_shlibs_F77=yes + fi + ;; + + sysv4.2uw2*) + archive_cmds_F77='$LD -G -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct_F77=yes + hardcode_minus_L_F77=no + hardcode_shlibpath_var_F77=no + hardcode_runpath_var=yes + runpath_var=LD_RUN_PATH + ;; + + sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[78]* | unixware7*) + no_undefined_flag_F77='${wl}-z ${wl}text' + if test "$GCC" = yes; then + archive_cmds_F77='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds_F77='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + fi + runpath_var='LD_RUN_PATH' + hardcode_shlibpath_var_F77=no + ;; + + sysv5*) + no_undefined_flag_F77=' -z text' + # $CC -shared without GNU ld will not create a library from C++ + # object files and a static libstdc++, better avoid it by now + archive_cmds_F77='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' + archive_expsym_cmds_F77='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' + hardcode_libdir_flag_spec_F77= + hardcode_shlibpath_var_F77=no + runpath_var='LD_RUN_PATH' + ;; + + uts4*) + archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec_F77='-L$libdir' + hardcode_shlibpath_var_F77=no + ;; + + *) + ld_shlibs_F77=no + ;; + esac + fi + +echo "$as_me:$LINENO: result: $ld_shlibs_F77" >&5 +echo "${ECHO_T}$ld_shlibs_F77" >&6 +test "$ld_shlibs_F77" = no && can_build_shared=no + +variables_saved_for_relink="PATH $shlibpath_var $runpath_var" +if test "$GCC" = yes; then + variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" +fi + +# +# Do we need to explicitly link libc? +# +case "x$archive_cmds_need_lc_F77" in +x|xyes) + # Assume -lc should be added + archive_cmds_need_lc_F77=yes + + if test "$enable_shared" = yes && test "$GCC" = yes; then + case $archive_cmds_F77 in + *'~'*) + # FIXME: we may have to deal with multi-command sequences. + ;; + '$CC '*) + # Test whether the compiler implicitly links with -lc since on some + # systems, -lgcc has to come before -lc. If gcc already passes -lc + # to ld, don't add -lc before -lgcc. + echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 +echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6 + $rm conftest* + printf "$lt_simple_compile_test_code" > conftest.$ac_ext + + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } 2>conftest.err; then + soname=conftest + lib=conftest + libobjs=conftest.$ac_objext + deplibs= + wl=$lt_prog_compiler_wl_F77 + compiler_flags=-v + linker_flags=-v + verstring= + output_objdir=. + libname=conftest + lt_save_allow_undefined_flag=$allow_undefined_flag_F77 + allow_undefined_flag_F77= + if { (eval echo "$as_me:$LINENO: \"$archive_cmds_F77 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5 + (eval $archive_cmds_F77 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } + then + archive_cmds_need_lc_F77=no + else + archive_cmds_need_lc_F77=yes + fi + allow_undefined_flag_F77=$lt_save_allow_undefined_flag + else + cat conftest.err 1>&5 + fi + $rm conftest* + echo "$as_me:$LINENO: result: $archive_cmds_need_lc_F77" >&5 +echo "${ECHO_T}$archive_cmds_need_lc_F77" >&6 + ;; + esac + fi + ;; +esac + +echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 +echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6 +library_names_spec= +libname_spec='lib$name' +soname_spec= +shrext_cmds=".so" +postinstall_cmds= +postuninstall_cmds= +finish_cmds= +finish_eval= +shlibpath_var= +shlibpath_overrides_runpath=unknown +version_type=none +dynamic_linker="$host_os ld.so" +sys_lib_dlsearch_path_spec="/lib /usr/lib" +if test "$GCC" = yes; then + sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` + if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then + # if the path contains ";" then we assume it to be the separator + # otherwise default to the standard path separator (i.e. ":") - it is + # assumed that no part of a normal pathname contains ";" but that should + # okay in the real world where ";" in dirpaths is itself problematic. + sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` + else + sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + fi +else + sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" +fi +need_lib_prefix=unknown +hardcode_into_libs=no + +# when you set need_version to no, make sure it does not cause -set_version +# flags to be left without arguments +need_version=unknown + +case $host_os in +aix3*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' + shlibpath_var=LIBPATH + + # AIX 3 has no versioning support, so we append a major version to the name. + soname_spec='${libname}${release}${shared_ext}$major' + ;; + +aix4* | aix5*) + version_type=linux + need_lib_prefix=no + need_version=no + hardcode_into_libs=yes + if test "$host_cpu" = ia64; then + # AIX 5 supports IA64 + library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + else + # With GCC up to 2.95.x, collect2 would create an import file + # for dependence libraries. The import file would start with + # the line `#! .'. This would cause the generated library to + # depend on `.', always an invalid library. This was fixed in + # development snapshots of GCC prior to 3.0. + case $host_os in + aix4 | aix4.[01] | aix4.[01].*) + if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' + echo ' yes ' + echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then + : + else + can_build_shared=no + fi + ;; + esac + # AIX (on Power*) has no versioning support, so currently we can not hardcode correct + # soname into executable. Probably we can add versioning support to + # collect2, so additional links can be useful in future. + if test "$aix_use_runtimelinking" = yes; then + # If using run time linking (on AIX 4.2 or later) use lib.so + # instead of lib.a to let people know that these are not + # typical AIX shared libraries. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + else + # We preserve .a as extension for shared libraries through AIX4.2 + # and later when we are not doing run time linking. + library_names_spec='${libname}${release}.a $libname.a' + soname_spec='${libname}${release}${shared_ext}$major' + fi + shlibpath_var=LIBPATH + fi + ;; + +amigaos*) + library_names_spec='$libname.ixlibrary $libname.a' + # Create ${libname}_ixlibrary.a entries in /sys/libs. + finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' + ;; + +beos*) + library_names_spec='${libname}${shared_ext}' + dynamic_linker="$host_os ld.so" + shlibpath_var=LIBRARY_PATH + ;; + +bsdi4*) + version_type=linux + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" + sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" + # the default ld.so.conf also contains /usr/contrib/lib and + # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow + # libtool to hard-code these into programs + ;; + +cygwin* | mingw* | pw32*) + version_type=windows + shrext_cmds=".dll" + need_version=no + need_lib_prefix=no + + case $GCC,$host_os in + yes,cygwin* | yes,mingw* | yes,pw32*) + library_names_spec='$libname.dll.a' + # DLL is installed to $(libdir)/../bin by postinstall_cmds + postinstall_cmds='base_file=`basename \${file}`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $rm \$dlpath' + shlibpath_overrides_runpath=yes + + case $host_os in + cygwin*) + # Cygwin DLLs use 'cyg' prefix rather than 'lib' + soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" + ;; + mingw*) + # MinGW DLLs use traditional 'lib' prefix + soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` + if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then + # It is most probably a Windows format PATH printed by + # mingw gcc, but we are running on Cygwin. Gcc prints its search + # path with ; separators, and with drive letters. We can handle the + # drive letters (cygwin fileutils understands them), so leave them, + # especially as we might pass files found there to a mingw objdump, + # which wouldn't understand a cygwinified path. Ahh. + sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` + else + sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + fi + ;; + pw32*) + # pw32 DLLs use 'pw' prefix rather than 'lib' + library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/./-/g'`${versuffix}${shared_ext}' + ;; + esac + ;; + + *) + library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' + ;; + esac + dynamic_linker='Win32 ld.exe' + # FIXME: first we should search . and the directory the executable is in + shlibpath_var=PATH + ;; + +darwin* | rhapsody*) + dynamic_linker="$host_os dyld" + version_type=darwin + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext' + soname_spec='${libname}${release}${major}$shared_ext' + shlibpath_overrides_runpath=yes + shlibpath_var=DYLD_LIBRARY_PATH + shrext_cmds='$(test .$module = .yes && echo .so || echo .dylib)' + # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same. + if test "$GCC" = yes; then + sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"` + else + sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib' + fi + sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' + ;; + +dgux*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +freebsd1*) + dynamic_linker=no + ;; + +kfreebsd*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='GNU ld.so' + ;; + +freebsd*) + objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout` + version_type=freebsd-$objformat + case $version_type in + freebsd-elf*) + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' + need_version=no + need_lib_prefix=no + ;; + freebsd-*) + library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' + need_version=yes + ;; + esac + shlibpath_var=LD_LIBRARY_PATH + case $host_os in + freebsd2*) + shlibpath_overrides_runpath=yes + ;; + freebsd3.01* | freebsdelf3.01*) + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + *) # from 3.2 on + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + esac + ;; + +gnu*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + hardcode_into_libs=yes + ;; + +hpux9* | hpux10* | hpux11*) + # Give a soname corresponding to the major version so that dld.sl refuses to + # link against other versions. + version_type=sunos + need_lib_prefix=no + need_version=no + case "$host_cpu" in + ia64*) + shrext_cmds='.so' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.so" + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + if test "X$HPUX_IA64_MODE" = X32; then + sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" else - ld_shlibs=no + sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" + fi + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + hppa*64*) + shrext_cmds='.sl' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.sl" + shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + *) + shrext_cmds='.sl' + dynamic_linker="$host_os dld.sl" + shlibpath_var=SHLIB_PATH + shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + ;; + esac + # HP-UX runs *really* slowly unless shared libraries are mode 555. + postinstall_cmds='chmod 555 $lib' + ;; + +irix5* | irix6* | nonstopux*) + case $host_os in + nonstopux*) version_type=nonstopux ;; + *) + if test "$lt_cv_prog_gnu_ld" = yes; then + version_type=linux + else + version_type=irix + fi ;; + esac + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' + case $host_os in + irix5* | nonstopux*) + libsuff= shlibsuff= + ;; + *) + case $LD in # libtool.m4 will add one of these switches to LD + *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") + libsuff= shlibsuff= libmagic=32-bit;; + *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") + libsuff=32 shlibsuff=N32 libmagic=N32;; + *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") + libsuff=64 shlibsuff=64 libmagic=64-bit;; + *) libsuff= shlibsuff= libmagic=never-match;; + esac + ;; + esac + shlibpath_var=LD_LIBRARY${shlibsuff}_PATH + shlibpath_overrides_runpath=no + sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" + sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" + hardcode_into_libs=yes + ;; + +# No shared lib support for Linux oldld, aout, or coff. +linux*oldld* | linux*aout* | linux*coff*) + dynamic_linker=no + ;; + +# This must be Linux ELF. +linux*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + # This implies no fast_install, which is unacceptable. + # Some rework will be needed to allow for fast_install + # before this can be enabled. + hardcode_into_libs=yes + + # Append ld.so.conf contents to the search path + if test -f /etc/ld.so.conf; then + lt_ld_extra=`$SED -e 's/:,\t/ /g;s/=^=*$//;s/=^= * / /g' /etc/ld.so.conf | tr '\n' ' '` + sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" + fi + + # We used to test for /lib/ld.so.1 and disable shared libraries on + # powerpc, because MkLinux only supported shared libraries with the + # GNU dynamic linker. Since this was broken with cross compilers, + # most powerpc-linux boxes support dynamic linking these days and + # people can always --disable-shared, the test was removed, and we + # assume the GNU/Linux dynamic linker is in use. + dynamic_linker='GNU/Linux ld.so' + ;; + +knetbsd*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='GNU ld.so' + ;; + +netbsd*) + version_type=sunos + need_lib_prefix=no + need_version=no + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + dynamic_linker='NetBSD (a.out) ld.so' + else + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + dynamic_linker='NetBSD ld.elf_so' + fi + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + +newsos6) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + ;; + +nto-qnx*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + ;; + +openbsd*) + version_type=sunos + need_lib_prefix=no + need_version=yes + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + shlibpath_var=LD_LIBRARY_PATH + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + case $host_os in + openbsd2.[89] | openbsd2.[89].*) + shlibpath_overrides_runpath=no + ;; + *) + shlibpath_overrides_runpath=yes + ;; + esac + else + shlibpath_overrides_runpath=yes + fi + ;; + +os2*) + libname_spec='$name' + shrext_cmds=".dll" + need_lib_prefix=no + library_names_spec='$libname${shared_ext} $libname.a' + dynamic_linker='OS/2 ld.exe' + shlibpath_var=LIBPATH + ;; + +osf3* | osf4* | osf5*) + version_type=osf + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" + sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" + ;; + +sco3.2v5*) + version_type=osf + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + ;; + +solaris*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + # ldd complains unless libraries are executable + postinstall_cmds='chmod +x $lib' + ;; + +sunos4*) + version_type=sunos + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + if test "$with_gnu_ld" = yes; then + need_lib_prefix=no + fi + need_version=yes + ;; + +sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + case $host_vendor in + sni) + shlibpath_overrides_runpath=no + need_lib_prefix=no + export_dynamic_flag_spec='${wl}-Blargedynsym' + runpath_var=LD_RUN_PATH + ;; + siemens) + need_lib_prefix=no + ;; + motorola) + need_lib_prefix=no + need_version=no + shlibpath_overrides_runpath=no + sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' + ;; + esac + ;; + +sysv4*MP*) + if test -d /usr/nec ;then + version_type=linux + library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' + soname_spec='$libname${shared_ext}.$major' + shlibpath_var=LD_LIBRARY_PATH + fi + ;; + +uts4*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +*) + dynamic_linker=no + ;; +esac +echo "$as_me:$LINENO: result: $dynamic_linker" >&5 +echo "${ECHO_T}$dynamic_linker" >&6 +test "$dynamic_linker" = no && can_build_shared=no + +echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 +echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6 +hardcode_action_F77= +if test -n "$hardcode_libdir_flag_spec_F77" || \ + test -n "$runpath_var F77" || \ + test "X$hardcode_automatic_F77"="Xyes" ; then + + # We can hardcode non-existant directories. + if test "$hardcode_direct_F77" != no && + # If the only mechanism to avoid hardcoding is shlibpath_var, we + # have to relink, otherwise we might link with an installed library + # when we should be linking with a yet-to-be-installed one + ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, F77)" != no && + test "$hardcode_minus_L_F77" != no; then + # Linking always hardcodes the temporary library directory. + hardcode_action_F77=relink + else + # We can link without hardcoding, and we can hardcode nonexisting dirs. + hardcode_action_F77=immediate + fi +else + # We cannot hardcode anything, or else we can only hardcode existing + # directories. + hardcode_action_F77=unsupported +fi +echo "$as_me:$LINENO: result: $hardcode_action_F77" >&5 +echo "${ECHO_T}$hardcode_action_F77" >&6 + +if test "$hardcode_action_F77" = relink; then + # Fast installation is not supported + enable_fast_install=no +elif test "$shlibpath_overrides_runpath" = yes || + test "$enable_shared" = no; then + # Fast installation is not necessary + enable_fast_install=needless +fi + +striplib= +old_striplib= +echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5 +echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6 +if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then + test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" + test -z "$striplib" && striplib="$STRIP --strip-unneeded" + echo "$as_me:$LINENO: result: yes" >&5 +echo "${ECHO_T}yes" >&6 +else +# FIXME - insert some real tests, host_os isn't really good enough + case $host_os in + darwin*) + if test -n "$STRIP" ; then + striplib="$STRIP -x" + echo "$as_me:$LINENO: result: yes" >&5 +echo "${ECHO_T}yes" >&6 + else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + ;; + *) + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 + ;; + esac +fi + + + +# The else clause should only fire when bootstrapping the +# libtool distribution, otherwise you forgot to ship ltmain.sh +# with your package, and you will get complaints that there are +# no rules to generate ltmain.sh. +if test -f "$ltmain"; then + # See if we are running on zsh, and set the options which allow our commands through + # without removal of \ escapes. + if test -n "${ZSH_VERSION+set}" ; then + setopt NO_GLOB_SUBST + fi + # Now quote all the things that may contain metacharacters while being + # careful not to overquote the AC_SUBSTed values. We take copies of the + # variables and quote the copies for generation of the libtool script. + for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC NM \ + SED SHELL STRIP \ + libname_spec library_names_spec soname_spec extract_expsyms_cmds \ + old_striplib striplib file_magic_cmd finish_cmds finish_eval \ + deplibs_check_method reload_flag reload_cmds need_locks \ + lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \ + lt_cv_sys_global_symbol_to_c_name_address \ + sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ + old_postinstall_cmds old_postuninstall_cmds \ + compiler_F77 \ + CC_F77 \ + LD_F77 \ + lt_prog_compiler_wl_F77 \ + lt_prog_compiler_pic_F77 \ + lt_prog_compiler_static_F77 \ + lt_prog_compiler_no_builtin_flag_F77 \ + export_dynamic_flag_spec_F77 \ + thread_safe_flag_spec_F77 \ + whole_archive_flag_spec_F77 \ + enable_shared_with_static_runtimes_F77 \ + old_archive_cmds_F77 \ + old_archive_from_new_cmds_F77 \ + predep_objects_F77 \ + postdep_objects_F77 \ + predeps_F77 \ + postdeps_F77 \ + compiler_lib_search_path_F77 \ + archive_cmds_F77 \ + archive_expsym_cmds_F77 \ + postinstall_cmds_F77 \ + postuninstall_cmds_F77 \ + old_archive_from_expsyms_cmds_F77 \ + allow_undefined_flag_F77 \ + no_undefined_flag_F77 \ + export_symbols_cmds_F77 \ + hardcode_libdir_flag_spec_F77 \ + hardcode_libdir_flag_spec_ld_F77 \ + hardcode_libdir_separator_F77 \ + hardcode_automatic_F77 \ + module_cmds_F77 \ + module_expsym_cmds_F77 \ + lt_cv_prog_compiler_c_o_F77 \ + exclude_expsyms_F77 \ + include_expsyms_F77; do + + case $var in + old_archive_cmds_F77 | \ + old_archive_from_new_cmds_F77 | \ + archive_cmds_F77 | \ + archive_expsym_cmds_F77 | \ + module_cmds_F77 | \ + module_expsym_cmds_F77 | \ + old_archive_from_expsyms_cmds_F77 | \ + export_symbols_cmds_F77 | \ + extract_expsyms_cmds | reload_cmds | finish_cmds | \ + postinstall_cmds | postuninstall_cmds | \ + old_postinstall_cmds | old_postuninstall_cmds | \ + sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) + # Double-quote double-evaled strings. + eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" + ;; + *) + eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" + ;; + esac + done + + case $lt_echo in + *'\$0 --fallback-echo"') + lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'` + ;; + esac + +cfgfile="$ofile" + + cat <<__EOF__ >> "$cfgfile" +# ### BEGIN LIBTOOL TAG CONFIG: $tagname + +# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: + +# Shell to use when invoking shell scripts. +SHELL=$lt_SHELL + +# Whether or not to build shared libraries. +build_libtool_libs=$enable_shared + +# Whether or not to build static libraries. +build_old_libs=$enable_static + +# Whether or not to add -lc for building shared libraries. +build_libtool_need_lc=$archive_cmds_need_lc_F77 + +# Whether or not to disallow shared libs when runtime libs are static +allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_F77 + +# Whether or not to optimize for fast installation. +fast_install=$enable_fast_install + +# The host system. +host_alias=$host_alias +host=$host + +# An echo program that does not interpret backslashes. +echo=$lt_echo + +# The archiver. +AR=$lt_AR +AR_FLAGS=$lt_AR_FLAGS + +# A C compiler. +LTCC=$lt_LTCC + +# A language-specific compiler. +CC=$lt_compiler_F77 + +# Is the compiler the GNU C compiler? +with_gcc=$GCC_F77 + +# An ERE matcher. +EGREP=$lt_EGREP + +# The linker used to build libraries. +LD=$lt_LD_F77 + +# Whether we need hard or soft links. +LN_S=$lt_LN_S + +# A BSD-compatible nm program. +NM=$lt_NM + +# A symbol stripping program +STRIP=$lt_STRIP + +# Used to examine libraries when file_magic_cmd begins "file" +MAGIC_CMD=$MAGIC_CMD + +# Used on cygwin: DLL creation program. +DLLTOOL="$DLLTOOL" + +# Used on cygwin: object dumper. +OBJDUMP="$OBJDUMP" + +# Used on cygwin: assembler. +AS="$AS" + +# The name of the directory that contains temporary libtool files. +objdir=$objdir + +# How to create reloadable object files. +reload_flag=$lt_reload_flag +reload_cmds=$lt_reload_cmds + +# How to pass a linker flag through the compiler. +wl=$lt_lt_prog_compiler_wl_F77 + +# Object file suffix (normally "o"). +objext="$ac_objext" + +# Old archive suffix (normally "a"). +libext="$libext" + +# Shared library suffix (normally ".so"). +shrext_cmds='$shrext_cmds' + +# Executable file suffix (normally ""). +exeext="$exeext" + +# Additional compiler flags for building library objects. +pic_flag=$lt_lt_prog_compiler_pic_F77 +pic_mode=$pic_mode + +# What is the maximum length of a command? +max_cmd_len=$lt_cv_sys_max_cmd_len + +# Does compiler simultaneously support -c and -o options? +compiler_c_o=$lt_lt_cv_prog_compiler_c_o_F77 + +# Must we lock files when doing compilation ? +need_locks=$lt_need_locks + +# Do we need the lib prefix for modules? +need_lib_prefix=$need_lib_prefix + +# Do we need a version for libraries? +need_version=$need_version + +# Whether dlopen is supported. +dlopen_support=$enable_dlopen + +# Whether dlopen of programs is supported. +dlopen_self=$enable_dlopen_self + +# Whether dlopen of statically linked programs is supported. +dlopen_self_static=$enable_dlopen_self_static + +# Compiler flag to prevent dynamic linking. +link_static_flag=$lt_lt_prog_compiler_static_F77 + +# Compiler flag to turn off builtin functions. +no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_F77 + +# Compiler flag to allow reflexive dlopens. +export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_F77 + +# Compiler flag to generate shared objects directly from archives. +whole_archive_flag_spec=$lt_whole_archive_flag_spec_F77 + +# Compiler flag to generate thread-safe objects. +thread_safe_flag_spec=$lt_thread_safe_flag_spec_F77 + +# Library versioning type. +version_type=$version_type + +# Format of library name prefix. +libname_spec=$lt_libname_spec + +# List of archive names. First name is the real one, the rest are links. +# The last name is the one that the linker finds with -lNAME. +library_names_spec=$lt_library_names_spec + +# The coded name of the library, if different from the real name. +soname_spec=$lt_soname_spec + +# Commands used to build and install an old-style archive. +RANLIB=$lt_RANLIB +old_archive_cmds=$lt_old_archive_cmds_F77 +old_postinstall_cmds=$lt_old_postinstall_cmds +old_postuninstall_cmds=$lt_old_postuninstall_cmds + +# Create an old-style archive from a shared archive. +old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_F77 + +# Create a temporary old-style archive to link instead of a shared archive. +old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_F77 + +# Commands used to build and install a shared archive. +archive_cmds=$lt_archive_cmds_F77 +archive_expsym_cmds=$lt_archive_expsym_cmds_F77 +postinstall_cmds=$lt_postinstall_cmds +postuninstall_cmds=$lt_postuninstall_cmds + +# Commands used to build a loadable module (assumed same as above if empty) +module_cmds=$lt_module_cmds_F77 +module_expsym_cmds=$lt_module_expsym_cmds_F77 + +# Commands to strip libraries. +old_striplib=$lt_old_striplib +striplib=$lt_striplib + +# Dependencies to place before the objects being linked to create a +# shared library. +predep_objects=$lt_predep_objects_F77 + +# Dependencies to place after the objects being linked to create a +# shared library. +postdep_objects=$lt_postdep_objects_F77 + +# Dependencies to place before the objects being linked to create a +# shared library. +predeps=$lt_predeps_F77 + +# Dependencies to place after the objects being linked to create a +# shared library. +postdeps=$lt_postdeps_F77 + +# The library search path used internally by the compiler when linking +# a shared library. +compiler_lib_search_path=$lt_compiler_lib_search_path_F77 + +# Method to check whether dependent libraries are shared objects. +deplibs_check_method=$lt_deplibs_check_method + +# Command to use when deplibs_check_method == file_magic. +file_magic_cmd=$lt_file_magic_cmd + +# Flag that allows shared libraries with undefined symbols to be built. +allow_undefined_flag=$lt_allow_undefined_flag_F77 + +# Flag that forces no undefined symbols. +no_undefined_flag=$lt_no_undefined_flag_F77 + +# Commands used to finish a libtool library installation in a directory. +finish_cmds=$lt_finish_cmds + +# Same as above, but a single script fragment to be evaled but not shown. +finish_eval=$lt_finish_eval + +# Take the output of nm and produce a listing of raw symbols and C names. +global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe + +# Transform the output of nm in a proper C declaration +global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl + +# Transform the output of nm in a C name address pair +global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address + +# This is the shared library runtime path variable. +runpath_var=$runpath_var + +# This is the shared library path variable. +shlibpath_var=$shlibpath_var + +# Is shlibpath searched before the hard-coded library search path? +shlibpath_overrides_runpath=$shlibpath_overrides_runpath + +# How to hardcode a shared library path into an executable. +hardcode_action=$hardcode_action_F77 + +# Whether we should hardcode library paths into libraries. +hardcode_into_libs=$hardcode_into_libs + +# Flag to hardcode \$libdir into a binary during linking. +# This must work even if \$libdir does not exist. +hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_F77 + +# If ld is used when linking, flag to hardcode \$libdir into +# a binary during linking. This must work even if \$libdir does +# not exist. +hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_F77 + +# Whether we need a single -rpath flag with a separated argument. +hardcode_libdir_separator=$lt_hardcode_libdir_separator_F77 + +# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the +# resulting binary. +hardcode_direct=$hardcode_direct_F77 + +# Set to yes if using the -LDIR flag during linking hardcodes DIR into the +# resulting binary. +hardcode_minus_L=$hardcode_minus_L_F77 + +# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into +# the resulting binary. +hardcode_shlibpath_var=$hardcode_shlibpath_var_F77 + +# Set to yes if building a shared library automatically hardcodes DIR into the library +# and all subsequent libraries and executables linked against it. +hardcode_automatic=$hardcode_automatic_F77 + +# Variables whose values should be saved in libtool wrapper scripts and +# restored at relink time. +variables_saved_for_relink="$variables_saved_for_relink" + +# Whether libtool must link a program against all its dependency libraries. +link_all_deplibs=$link_all_deplibs_F77 + +# Compile-time system search path for libraries +sys_lib_search_path_spec=$lt_sys_lib_search_path_spec + +# Run-time system search path for libraries +sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec + +# Fix the shell variable \$srcfile for the compiler. +fix_srcfile_path="$fix_srcfile_path_F77" + +# Set to yes if exported symbols are required. +always_export_symbols=$always_export_symbols_F77 + +# The commands to list exported symbols. +export_symbols_cmds=$lt_export_symbols_cmds_F77 + +# The commands to extract the exported symbol list from a shared archive. +extract_expsyms_cmds=$lt_extract_expsyms_cmds + +# Symbols that should not be listed in the preloaded symbols. +exclude_expsyms=$lt_exclude_expsyms_F77 + +# Symbols that must always be exported. +include_expsyms=$lt_include_expsyms_F77 + +# ### END LIBTOOL TAG CONFIG: $tagname + +__EOF__ + + +else + # If there is no Makefile yet, we rely on a make rule to execute + # `config.status --recheck' to rerun these tests and create the + # libtool script then. + ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` + if test -f "$ltmain_in"; then + test -f Makefile && make "$ltmain" + fi +fi + + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + +CC="$lt_save_CC" + + else + tagname="" + fi + ;; + + GCJ) + if test -n "$GCJ" && test "X$GCJ" != "Xno"; then + + + +# Source file extension for Java test sources. +ac_ext=java + +# Object file extension for compiled Java test sources. +objext=o +objext_GCJ=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code="class foo {}\n" + +# Code to be used in simple link tests +lt_simple_link_test_code='public class conftest { public static void main(String argv) {}; }\n' + +# ltmain only uses $CC for tagged configurations so make sure $CC is set. + +# If no C compiler was specified, use CC. +LTCC=${LTCC-"$CC"} + +# Allow CC to be a program name with arguments. +compiler=$CC + + +# Allow CC to be a program name with arguments. +lt_save_CC="$CC" +CC=${GCJ-"gcj"} +compiler=$CC +compiler_GCJ=$CC + +# GCJ did not exist at the time GCC didn't implicitly link libc in. +archive_cmds_need_lc_GCJ=no + + +lt_prog_compiler_no_builtin_flag_GCJ= + +if test "$GCC" = yes; then + lt_prog_compiler_no_builtin_flag_GCJ=' -fno-builtin' + + +echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 +echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6 +if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + lt_cv_prog_compiler_rtti_exceptions=no + ac_outfile=conftest.$ac_objext + printf "$lt_simple_compile_test_code" > conftest.$ac_ext + lt_compiler_flag="-fno-rtti -fno-exceptions" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + # The option is referenced via a variable to avoid confusing sed. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:15100: $lt_compile\"" >&5) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&5 + echo "$as_me:15104: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + if test ! -s conftest.err; then + lt_cv_prog_compiler_rtti_exceptions=yes + fi + fi + $rm conftest* + +fi +echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 +echo "${ECHO_T}$lt_cv_prog_compiler_rtti_exceptions" >&6 + +if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then + lt_prog_compiler_no_builtin_flag_GCJ="$lt_prog_compiler_no_builtin_flag_GCJ -fno-rtti -fno-exceptions" +else + : +fi + +fi + +lt_prog_compiler_wl_GCJ= +lt_prog_compiler_pic_GCJ= +lt_prog_compiler_static_GCJ= + +echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 +echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6 + + if test "$GCC" = yes; then + lt_prog_compiler_wl_GCJ='-Wl,' + lt_prog_compiler_static_GCJ='-static' + + case $host_os in + aix*) + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + lt_prog_compiler_static_GCJ='-Bstatic' + fi + ;; + + amigaos*) + # FIXME: we need at least 68020 code to build shared libraries, but + # adding the `-m68020' flag to GCC prevents building anything better, + # like `-m68040'. + lt_prog_compiler_pic_GCJ='-m68020 -resident32 -malways-restore-a4' + ;; + + beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) + # PIC is the default for these OSes. + ;; + + mingw* | pw32* | os2*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + lt_prog_compiler_pic_GCJ='-DDLL_EXPORT' + ;; + + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + lt_prog_compiler_pic_GCJ='-fno-common' + ;; + + msdosdjgpp*) + # Just because we use GCC doesn't mean we suddenly get shared libraries + # on systems that don't support them. + lt_prog_compiler_can_build_shared_GCJ=no + enable_shared=no + ;; + + sysv4*MP*) + if test -d /usr/nec; then + lt_prog_compiler_pic_GCJ=-Kconform_pic + fi + ;; + + hpux*) + # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but + # not for PA HP-UX. + case "$host_cpu" in + hppa*64*|ia64*) + # +Z the default + ;; + *) + lt_prog_compiler_pic_GCJ='-fPIC' + ;; + esac + ;; + + *) + lt_prog_compiler_pic_GCJ='-fPIC' + ;; + esac + else + # PORTME Check for flag to pass linker flags through the system compiler. + case $host_os in + aix*) + lt_prog_compiler_wl_GCJ='-Wl,' + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + lt_prog_compiler_static_GCJ='-Bstatic' + else + lt_prog_compiler_static_GCJ='-bnso -bI:/lib/syscalls.exp' + fi + ;; + + mingw* | pw32* | os2*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + lt_prog_compiler_pic_GCJ='-DDLL_EXPORT' + ;; + + hpux9* | hpux10* | hpux11*) + lt_prog_compiler_wl_GCJ='-Wl,' + # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but + # not for PA HP-UX. + case "$host_cpu" in + hppa*64*|ia64*) + # +Z the default + ;; + *) + lt_prog_compiler_pic_GCJ='+Z' + ;; + esac + # Is there a better lt_prog_compiler_static that works with the bundled CC? + lt_prog_compiler_static_GCJ='${wl}-a ${wl}archive' + ;; + + irix5* | irix6* | nonstopux*) + lt_prog_compiler_wl_GCJ='-Wl,' + # PIC (with -KPIC) is the default. + lt_prog_compiler_static_GCJ='-non_shared' + ;; + + newsos6) + lt_prog_compiler_pic_GCJ='-KPIC' + lt_prog_compiler_static_GCJ='-Bstatic' + ;; + + linux*) + case $CC in + icc* | ecc*) + lt_prog_compiler_wl_GCJ='-Wl,' + lt_prog_compiler_pic_GCJ='-KPIC' + lt_prog_compiler_static_GCJ='-static' + ;; + ccc*) + lt_prog_compiler_wl_GCJ='-Wl,' + # All Alpha code is PIC. + lt_prog_compiler_static_GCJ='-non_shared' + ;; + esac + ;; + + osf3* | osf4* | osf5*) + lt_prog_compiler_wl_GCJ='-Wl,' + # All OSF/1 code is PIC. + lt_prog_compiler_static_GCJ='-non_shared' + ;; + + sco3.2v5*) + lt_prog_compiler_pic_GCJ='-Kpic' + lt_prog_compiler_static_GCJ='-dn' + ;; + + solaris*) + lt_prog_compiler_wl_GCJ='-Wl,' + lt_prog_compiler_pic_GCJ='-KPIC' + lt_prog_compiler_static_GCJ='-Bstatic' + ;; + + sunos4*) + lt_prog_compiler_wl_GCJ='-Qoption ld ' + lt_prog_compiler_pic_GCJ='-PIC' + lt_prog_compiler_static_GCJ='-Bstatic' + ;; + + sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + lt_prog_compiler_wl_GCJ='-Wl,' + lt_prog_compiler_pic_GCJ='-KPIC' + lt_prog_compiler_static_GCJ='-Bstatic' + ;; + + sysv4*MP*) + if test -d /usr/nec ;then + lt_prog_compiler_pic_GCJ='-Kconform_pic' + lt_prog_compiler_static_GCJ='-Bstatic' + fi + ;; + + uts4*) + lt_prog_compiler_pic_GCJ='-pic' + lt_prog_compiler_static_GCJ='-Bstatic' + ;; + + *) + lt_prog_compiler_can_build_shared_GCJ=no + ;; + esac + fi + +echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_GCJ" >&5 +echo "${ECHO_T}$lt_prog_compiler_pic_GCJ" >&6 + +# +# Check to make sure the PIC flag actually works. +# +if test -n "$lt_prog_compiler_pic_GCJ"; then + +echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works" >&5 +echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works... $ECHO_C" >&6 +if test "${lt_prog_compiler_pic_works_GCJ+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + lt_prog_compiler_pic_works_GCJ=no + ac_outfile=conftest.$ac_objext + printf "$lt_simple_compile_test_code" > conftest.$ac_ext + lt_compiler_flag="$lt_prog_compiler_pic_GCJ" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + # The option is referenced via a variable to avoid confusing sed. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:15333: $lt_compile\"" >&5) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&5 + echo "$as_me:15337: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + if test ! -s conftest.err; then + lt_prog_compiler_pic_works_GCJ=yes + fi + fi + $rm conftest* + +fi +echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works_GCJ" >&5 +echo "${ECHO_T}$lt_prog_compiler_pic_works_GCJ" >&6 + +if test x"$lt_prog_compiler_pic_works_GCJ" = xyes; then + case $lt_prog_compiler_pic_GCJ in + "" | " "*) ;; + *) lt_prog_compiler_pic_GCJ=" $lt_prog_compiler_pic_GCJ" ;; + esac +else + lt_prog_compiler_pic_GCJ= + lt_prog_compiler_can_build_shared_GCJ=no +fi + +fi +case "$host_os" in + # For platforms which do not support PIC, -DPIC is meaningless: + *djgpp*) + lt_prog_compiler_pic_GCJ= + ;; + *) + lt_prog_compiler_pic_GCJ="$lt_prog_compiler_pic_GCJ" + ;; +esac + +echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 +echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6 +if test "${lt_cv_prog_compiler_c_o_GCJ+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + lt_cv_prog_compiler_c_o_GCJ=no + $rm -r conftest 2>/dev/null + mkdir conftest + cd conftest + mkdir out + printf "$lt_simple_compile_test_code" > conftest.$ac_ext + + lt_compiler_flag="-o out/conftest2.$ac_objext" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:15393: $lt_compile\"" >&5) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&5 + echo "$as_me:15397: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + if test ! -s out/conftest.err; then + lt_cv_prog_compiler_c_o_GCJ=yes + fi + fi + chmod u+w . + $rm conftest* + # SGI C++ compiler will create directory out/ii_files/ for + # template instantiation + test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files + $rm out/* && rmdir out + cd .. + rmdir conftest + $rm conftest* + +fi +echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_GCJ" >&5 +echo "${ECHO_T}$lt_cv_prog_compiler_c_o_GCJ" >&6 + + +hard_links="nottested" +if test "$lt_cv_prog_compiler_c_o_GCJ" = no && test "$need_locks" != no; then + # do not overwrite the value of need_locks provided by the user + echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 +echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6 + hard_links=yes + $rm conftest* + ln conftest.a conftest.b 2>/dev/null && hard_links=no + touch conftest.a + ln conftest.a conftest.b 2>&5 || hard_links=no + ln conftest.a conftest.b 2>/dev/null && hard_links=no + echo "$as_me:$LINENO: result: $hard_links" >&5 +echo "${ECHO_T}$hard_links" >&6 + if test "$hard_links" = no; then + { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 +echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} + need_locks=warn + fi +else + need_locks=no +fi + +echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 +echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6 + + runpath_var= + allow_undefined_flag_GCJ= + enable_shared_with_static_runtimes_GCJ=no + archive_cmds_GCJ= + archive_expsym_cmds_GCJ= + old_archive_From_new_cmds_GCJ= + old_archive_from_expsyms_cmds_GCJ= + export_dynamic_flag_spec_GCJ= + whole_archive_flag_spec_GCJ= + thread_safe_flag_spec_GCJ= + hardcode_libdir_flag_spec_GCJ= + hardcode_libdir_flag_spec_ld_GCJ= + hardcode_libdir_separator_GCJ= + hardcode_direct_GCJ=no + hardcode_minus_L_GCJ=no + hardcode_shlibpath_var_GCJ=unsupported + link_all_deplibs_GCJ=unknown + hardcode_automatic_GCJ=no + module_cmds_GCJ= + module_expsym_cmds_GCJ= + always_export_symbols_GCJ=no + export_symbols_cmds_GCJ='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + # include_expsyms should be a list of space-separated symbols to be *always* + # included in the symbol list + include_expsyms_GCJ= + # exclude_expsyms can be an extended regexp of symbols to exclude + # it will be wrapped by ` (' and `)$', so one must not match beginning or + # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', + # as well as any symbol that contains `d'. + exclude_expsyms_GCJ="_GLOBAL_OFFSET_TABLE_" + # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out + # platforms (ab)use it in PIC code, but their linkers get confused if + # the symbol is explicitly referenced. Since portable code cannot + # rely on this symbol name, it's probably fine to never include it in + # preloaded symbol tables. + extract_expsyms_cmds= + + case $host_os in + cygwin* | mingw* | pw32*) + # FIXME: the MSVC++ port hasn't been tested in a loooong time + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + if test "$GCC" != yes; then + with_gnu_ld=no fi ;; + openbsd*) + with_gnu_ld=no + ;; + esac - cygwin* | mingw* | pw32*) - # hardcode_libdir_flag_spec is actually meaningless, as there is - # no search path for DLLs. - hardcode_libdir_flag_spec='-L$libdir' - allow_undefined_flag=unsupported - always_export_symbols=yes - - extract_expsyms_cmds='test -f $output_objdir/impgen.c || \ - sed -e "/^# \/\* impgen\.c starts here \*\//,/^# \/\* impgen.c ends here \*\// { s/^# //;s/^# *$//; p; }" -e d < $''0 > $output_objdir/impgen.c~ - test -f $output_objdir/impgen.exe || (cd $output_objdir && \ - if test "x$HOST_CC" != "x" ; then $HOST_CC -o impgen impgen.c ; \ - else $CC -o impgen impgen.c ; fi)~ - $output_objdir/impgen $dir/$soroot > $output_objdir/$soname-def' - - old_archive_from_expsyms_cmds='$DLLTOOL --as=$AS --dllname $soname --def $output_objdir/$soname-def --output-lib $output_objdir/$newlib' - - # cygwin and mingw dlls have different entry points and sets of symbols - # to exclude. - # FIXME: what about values for MSVC? - dll_entry=__cygwin_dll_entry@12 - dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12~ + ld_shlibs_GCJ=yes + if test "$with_gnu_ld" = yes; then + # If archive_cmds runs LD, not CC, wlarc should be empty + wlarc='${wl}' + + # See if GNU ld supports shared libraries. case $host_os in - mingw*) - # mingw values - dll_entry=_DllMainCRTStartup@12 - dll_exclude_symbols=DllMain@12,DllMainCRTStartup@12,DllEntryPoint@12~ + aix3* | aix4* | aix5*) + # On AIX/PPC, the GNU linker is very broken + if test "$host_cpu" != ia64; then + ld_shlibs_GCJ=no + cat <&2 + +*** Warning: the GNU linker, at least up to release 2.9.1, is reported +*** to be unable to reliably create shared libraries on AIX. +*** Therefore, libtool is disabling shared libraries support. If you +*** really care for shared libraries, you may want to modify your PATH +*** so that a non-GNU linker is found, and then restart. + +EOF + fi ;; - esac - # mingw and cygwin differ, and it's simplest to just exclude the union - # of the two symbol sets. - dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12,DllMainCRTStartup@12,DllEntryPoint@12 - - # recent cygwin and mingw systems supply a stub DllMain which the user - # can override, but on older systems we have to supply one (in ltdll.c) - if test "x$lt_cv_need_dllmain" = "xyes"; then - ltdll_obj='$output_objdir/$soname-ltdll.'"$ac_objext " - ltdll_cmds='test -f $output_objdir/$soname-ltdll.c || sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < $''0 > $output_objdir/$soname-ltdll.c~ - test -f $output_objdir/$soname-ltdll.$ac_objext || (cd $output_objdir && $CC -c $soname-ltdll.c)~' - else - ltdll_obj= - ltdll_cmds= - fi + amigaos*) + archive_cmds_GCJ='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + hardcode_libdir_flag_spec_GCJ='-L$libdir' + hardcode_minus_L_GCJ=yes + + # Samuel A. Falvo II reports + # that the semantics of dynamic libraries on AmigaOS, at least up + # to version 4, is to share data among multiple programs linked + # with the same dynamic library. Since this doesn't match the + # behavior of shared libraries on other platforms, we can't use + # them. + ld_shlibs_GCJ=no + ;; - # Extract the symbol export list from an `--export-all' def file, - # then regenerate the def file from the symbol export list, so that - # the compiled dll only exports the symbol export list. - # Be careful not to strip the DATA tag left be newer dlltools. - export_symbols_cmds="$ltdll_cmds"' - $DLLTOOL --export-all --exclude-symbols '$dll_exclude_symbols' --output-def $output_objdir/$soname-def '$ltdll_obj'$libobjs $convenience~ - sed -e "1,/EXPORTS/d" -e "s/ @ [0-9]*//" -e "s/ *;.*$//" < $output_objdir/$soname-def > $export_symbols' - - # If the export-symbols file already is a .def file (1st line - # is EXPORTS), use it as is. - # If DATA tags from a recent dlltool are present, honour them! - archive_expsym_cmds='if test "x`head -1 $export_symbols`" = xEXPORTS; then - cp $export_symbols $output_objdir/$soname-def; - else - echo EXPORTS > $output_objdir/$soname-def; - _lt_hint=1; - cat $export_symbols | while read symbol; do - set dummy \$symbol; - case \$# in - 2) echo " \$2 @ \$_lt_hint ; " >> $output_objdir/$soname-def;; - *) echo " \$2 @ \$_lt_hint \$3 ; " >> $output_objdir/$soname-def;; - esac; - _lt_hint=`expr 1 + \$_lt_hint`; - done; - fi~ - '"$ltdll_cmds"' - $CC -Wl,--base-file,$output_objdir/$soname-base '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~ - $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp~ - $CC -Wl,--base-file,$output_objdir/$soname-base $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~ - $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp --output-lib $output_objdir/$libname.dll.a~ - $CC $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags' - ;; + beos*) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + allow_undefined_flag_GCJ=unsupported + # Joseph Beckenbach says some releases of gcc + # support --undefined. This deserves some investigation. FIXME + archive_cmds_GCJ='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + else + ld_shlibs_GCJ=no + fi + ;; - netbsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' - wlarc= - else - archive_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - fi - ;; + cygwin* | mingw* | pw32*) + # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, GCJ) is actually meaningless, + # as there is no search path for DLLs. + hardcode_libdir_flag_spec_GCJ='-L$libdir' + allow_undefined_flag_GCJ=unsupported + always_export_symbols_GCJ=no + enable_shared_with_static_runtimes_GCJ=yes + export_symbols_cmds_GCJ='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGS] /s/.* \([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols' + + if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then + archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' + # If the export-symbols file already is a .def file (1st line + # is EXPORTS), use it as is; otherwise, prepend... + archive_expsym_cmds_GCJ='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then + cp $export_symbols $output_objdir/$soname.def; + else + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ + $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' + else + ld_shlibs=no + fi + ;; - solaris* | sysv5*) - if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then - ld_shlibs=no - cat <&2 + netbsd* | knetbsd*-gnu) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + archive_cmds_GCJ='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' + wlarc= + else + archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + fi + ;; + + solaris* | sysv5*) + if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then + ld_shlibs_GCJ=no + cat <&2 *** Warning: The releases 2.8.* of the GNU linker cannot reliably *** create shared libraries on Solaris systems. Therefore, libtool @@ -5595,539 +15590,780 @@ *** used, and then restart. EOF - elif $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - ld_shlibs=no - fi - ;; + elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs_GCJ=no + fi + ;; - sunos4*) - archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' - wlarc= - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; + sunos4*) + archive_cmds_GCJ='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' + wlarc= + hardcode_direct_GCJ=yes + hardcode_shlibpath_var_GCJ=no + ;; - *) - if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + linux*) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + tmp_archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_cmds_GCJ="$tmp_archive_cmds" + supports_anon_versioning=no + case `$LD -v 2>/dev/null` in + *\ 01.* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 + *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... + *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... + *\ 2.11.*) ;; # other 2.11 versions + *) supports_anon_versioning=yes ;; + esac + if test $supports_anon_versioning = yes; then + archive_expsym_cmds_GCJ='$echo "{ global:" > $output_objdir/$libname.ver~ +cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ +$echo "local: *; };" >> $output_objdir/$libname.ver~ + $CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' + else + archive_expsym_cmds_GCJ="$tmp_archive_cmds" + fi + link_all_deplibs_GCJ=no else - ld_shlibs=no + ld_shlibs_GCJ=no fi ;; - esac - if test "$ld_shlibs" = yes; then - runpath_var=LD_RUN_PATH - hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir' - export_dynamic_flag_spec='${wl}--export-dynamic' - case $host_os in - cygwin* | mingw* | pw32*) - # dlltool doesn't understand --whole-archive et. al. - whole_archive_flag_spec= - ;; *) - # ancient GNU ld didn't support --whole-archive et. al. - if $LD --help 2>&1 | egrep 'no-whole-archive' > /dev/null; then - whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else - whole_archive_flag_spec= + ld_shlibs_GCJ=no fi ;; esac - fi -else - # PORTME fill in a description of your system's linker (not GNU ld) - case $host_os in - aix3*) - allow_undefined_flag=unsupported - always_export_symbols=yes - archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' - # Note: this linker hardcodes the directories in LIBPATH if there - # are no directories specified by -L. - hardcode_minus_L=yes - if test "$GCC" = yes && test -z "$link_static_flag"; then - # Neither direct hardcoding nor static linking is supported with a - # broken collect2. - hardcode_direct=unsupported - fi - ;; - - aix4* | aix5*) - if test "$host_cpu" = ia64; then - # On IA64, the linker does run time linking by default, so we don't - # have to do anything special. - aix_use_runtimelinking=no - exp_sym_flag='-Bexport' - no_entry_flag="" - else - aix_use_runtimelinking=no - - # Test if we are trying to use run time linking or normal - # AIX style linking. If -brtl is somewhere in LDFLAGS, we - # need to do runtime linking. - case $host_os in aix4.[23]|aix4.[23].*|aix5*) - for ld_flag in $LDFLAGS; do - if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then - aix_use_runtimelinking=yes - break - fi - done - esac - exp_sym_flag='-bexport' - no_entry_flag='-bnoentry' + if test "$ld_shlibs_GCJ" = yes; then + runpath_var=LD_RUN_PATH + hardcode_libdir_flag_spec_GCJ='${wl}--rpath ${wl}$libdir' + export_dynamic_flag_spec_GCJ='${wl}--export-dynamic' + # ancient GNU ld didn't support --whole-archive et. al. + if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then + whole_archive_flag_spec_GCJ="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + else + whole_archive_flag_spec_GCJ= + fi fi + else + # PORTME fill in a description of your system's linker (not GNU ld) + case $host_os in + aix3*) + allow_undefined_flag_GCJ=unsupported + always_export_symbols_GCJ=yes + archive_expsym_cmds_GCJ='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' + # Note: this linker hardcodes the directories in LIBPATH if there + # are no directories specified by -L. + hardcode_minus_L_GCJ=yes + if test "$GCC" = yes && test -z "$link_static_flag"; then + # Neither direct hardcoding nor static linking is supported with a + # broken collect2. + hardcode_direct_GCJ=unsupported + fi + ;; - # When large executables or shared objects are built, AIX ld can - # have problems creating the table of contents. If linking a library - # or program results in "error TOC overflow" add -mminimal-toc to - # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not - # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. - - hardcode_direct=yes - archive_cmds='' - hardcode_libdir_separator=':' - if test "$GCC" = yes; then - case $host_os in aix4.[012]|aix4.[012].*) - collect2name=`${CC} -print-prog-name=collect2` - if test -f "$collect2name" && \ - strings "$collect2name" | grep resolve_lib_name >/dev/null - then - # We have reworked collect2 - hardcode_direct=yes + aix4* | aix5*) + if test "$host_cpu" = ia64; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. + aix_use_runtimelinking=no + exp_sym_flag='-Bexport' + no_entry_flag="" + else + # If we're using GNU nm, then we don't want the "-C" option. + # -C means demangle to AIX nm, but means don't demangle with GNU nm + if $NM -V 2>&1 | grep 'GNU' > /dev/null; then + export_symbols_cmds_GCJ='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' else - # We have old collect2 - hardcode_direct=unsupported - # It fails to find uninstalled libraries when the uninstalled - # path is not listed in the libpath. Setting hardcode_minus_L - # to unsupported forces relinking - hardcode_minus_L=yes - hardcode_libdir_flag_spec='-L$libdir' - hardcode_libdir_separator= + export_symbols_cmds_GCJ='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' fi - esac + aix_use_runtimelinking=no - shared_flag='-shared' - else - # not using gcc - if test "$host_cpu" = ia64; then - shared_flag='${wl}-G' + # Test if we are trying to use run time linking or normal + # AIX style linking. If -brtl is somewhere in LDFLAGS, we + # need to do runtime linking. + case $host_os in aix4.[23]|aix4.[23].*|aix5*) + for ld_flag in $LDFLAGS; do + if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then + aix_use_runtimelinking=yes + break + fi + done + esac + + exp_sym_flag='-bexport' + no_entry_flag='-bnoentry' + fi + + # When large executables or shared objects are built, AIX ld can + # have problems creating the table of contents. If linking a library + # or program results in "error TOC overflow" add -mminimal-toc to + # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not + # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. + + archive_cmds_GCJ='' + hardcode_direct_GCJ=yes + hardcode_libdir_separator_GCJ=':' + link_all_deplibs_GCJ=yes + + if test "$GCC" = yes; then + case $host_os in aix4.012|aix4.012.*) + # We only want to do this on AIX 4.2 and lower, the check + # below for broken collect2 doesn't work under 4.3+ + collect2name=`${CC} -print-prog-name=collect2` + if test -f "$collect2name" && \ + strings "$collect2name" | grep resolve_lib_name >/dev/null + then + # We have reworked collect2 + hardcode_direct_GCJ=yes + else + # We have old collect2 + hardcode_direct_GCJ=unsupported + # It fails to find uninstalled libraries when the uninstalled + # path is not listed in the libpath. Setting hardcode_minus_L + # to unsupported forces relinking + hardcode_minus_L_GCJ=yes + hardcode_libdir_flag_spec_GCJ='-L$libdir' + hardcode_libdir_separator_GCJ= + fi + esac + shared_flag='-shared' else - if test "$aix_use_runtimelinking" = yes; then - shared_flag='${wl}-G' + # not using gcc + if test "$host_cpu" = ia64; then + # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release + # chokes on -Wl,-G. The following line is correct: + shared_flag='-G' else - shared_flag='${wl}-bM:SRE' + if test "$aix_use_runtimelinking" = yes; then + shared_flag='${wl}-G' + else + shared_flag='${wl}-bM:SRE' + fi fi fi - fi - # It seems that -bexpall can do strange things, so it is better to - # generate a list of symbols to export. - always_export_symbols=yes - if test "$aix_use_runtimelinking" = yes; then - # Warning - without using the other runtime loading flags (-brtl), - # -berok will link without error, but may produce a broken library. - allow_undefined_flag='-berok' - hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:/usr/lib:/lib' - archive_expsym_cmds="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag" - else - if test "$host_cpu" = ia64; then - hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' - allow_undefined_flag="-z nodefs" - archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname ${wl}-h$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" - else - hardcode_libdir_flag_spec='${wl}-bnolibpath ${wl}-blibpath:$libdir:/usr/lib:/lib' - # Warning - without using the other run time loading flags, + # It seems that -bexpall does not export symbols beginning with + # underscore (_), so it is better to generate a list of symbols to export. + always_export_symbols_GCJ=yes + if test "$aix_use_runtimelinking" = yes; then + # Warning - without using the other runtime loading flags (-brtl), # -berok will link without error, but may produce a broken library. - allow_undefined_flag='${wl}-berok' - # This is a bit strange, but is similar to how AIX traditionally builds - # it's shared libraries. - archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"' ~$AR -crlo $objdir/$libname$release.a $objdir/$soname' + allow_undefined_flag_GCJ='-berok' + # Determine the default libpath from the value encoded in an empty executable. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + +aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } +}'` +# Check for a 64-bit object if we didn't find anything. +if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } +}'`; fi +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + + hardcode_libdir_flag_spec_GCJ='${wl}-blibpath:$libdir:'"$aix_libpath" + archive_expsym_cmds_GCJ="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag" + else + if test "$host_cpu" = ia64; then + hardcode_libdir_flag_spec_GCJ='${wl}-R $libdir:/usr/lib:/lib' + allow_undefined_flag_GCJ="-z nodefs" + archive_expsym_cmds_GCJ="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" + else + # Determine the default libpath from the value encoded in an empty executable. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + +aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } +}'` +# Check for a 64-bit object if we didn't find anything. +if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } +}'`; fi +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + + hardcode_libdir_flag_spec_GCJ='${wl}-blibpath:$libdir:'"$aix_libpath" + # Warning - without using the other run time loading flags, + # -berok will link without error, but may produce a broken library. + no_undefined_flag_GCJ=' ${wl}-bernotok' + allow_undefined_flag_GCJ=' ${wl}-berok' + # -bexpall does not export symbols beginning with underscore (_) + always_export_symbols_GCJ=yes + # Exported symbols can be pulled into shared objects from archives + whole_archive_flag_spec_GCJ=' ' + archive_cmds_need_lc_GCJ=yes + # This is similar to how AIX traditionally builds it's shared libraries. + archive_expsym_cmds_GCJ="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + fi fi - fi - ;; + ;; - amigaos*) - archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - # see comment about different semantics on the GNU ld section - ld_shlibs=no - ;; + amigaos*) + archive_cmds_GCJ='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + hardcode_libdir_flag_spec_GCJ='-L$libdir' + hardcode_minus_L_GCJ=yes + # see comment about different semantics on the GNU ld section + ld_shlibs_GCJ=no + ;; - cygwin* | mingw* | pw32*) - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - # hardcode_libdir_flag_spec is actually meaningless, as there is - # no search path for DLLs. - hardcode_libdir_flag_spec=' ' - allow_undefined_flag=unsupported - # Tell ltmain to make .lib files, not .a files. - libext=lib - # FIXME: Setting linknames here is a bad hack. - archive_cmds='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | sed -e '\''s/ -lc$//'\''` -link -dll~linknames=' - # The linker will automatically build a .lib file if we build a DLL. - old_archive_from_new_cmds='true' - # FIXME: Should let the user specify the lib program. - old_archive_cmds='lib /OUT:$oldlib$oldobjs$old_deplibs' - fix_srcfile_path='`cygpath -w "$srcfile"`' - ;; + bsdi4*) + export_dynamic_flag_spec_GCJ=-rdynamic + ;; - darwin* | rhapsody*) - case "$host_os" in - rhapsody* | darwin1.[012]) - allow_undefined_flag='-undefined suppress' + cygwin* | mingw* | pw32*) + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + hardcode_libdir_flag_spec_GCJ=' ' + allow_undefined_flag_GCJ=unsupported + # Tell ltmain to make .lib files, not .a files. + libext=lib + # Tell ltmain to make .dll files, not .so files. + shrext_cmds=".dll" + # FIXME: Setting linknames here is a bad hack. + archive_cmds_GCJ='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames=' + # The linker will automatically build a .lib file if we build a DLL. + old_archive_From_new_cmds_GCJ='true' + # FIXME: Should let the user specify the lib program. + old_archive_cmds_GCJ='lib /OUT:$oldlib$oldobjs$old_deplibs' + fix_srcfile_path='`cygpath -w "$srcfile"`' + enable_shared_with_static_runtimes_GCJ=yes ;; - *) # Darwin 1.3 on - allow_undefined_flag='-flat_namespace -undefined suppress' + + darwin* | rhapsody*) + if test "$GXX" = yes ; then + archive_cmds_need_lc_GCJ=no + case "$host_os" in + rhapsody* | darwin1.[012]) + allow_undefined_flag_GCJ='-undefined suppress' + ;; + *) # Darwin 1.3 on + if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then + allow_undefined_flag_GCJ='-flat_namespace -undefined suppress' + else + case ${MACOSX_DEPLOYMENT_TARGET} in + 10.[012]) + allow_undefined_flag_GCJ='-flat_namespace -undefined suppress' + ;; + 10.*) + allow_undefined_flag_GCJ='-undefined dynamic_lookup' + ;; + esac + fi + ;; + esac + lt_int_apple_cc_single_mod=no + output_verbose_link_cmd='echo' + if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then + lt_int_apple_cc_single_mod=yes + fi + if test "X$lt_int_apple_cc_single_mod" = Xyes ; then + archive_cmds_GCJ='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring' + else + archive_cmds_GCJ='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring' + fi + module_cmds_GCJ='$CC ${wl}-bind_at_load $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' + # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's + if test "X$lt_int_apple_cc_single_mod" = Xyes ; then + archive_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + else + archive_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + fi + module_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + hardcode_direct_GCJ=no + hardcode_automatic_GCJ=yes + hardcode_shlibpath_var_GCJ=unsupported + whole_archive_flag_spec_GCJ='-all_load $convenience' + link_all_deplibs_GCJ=yes + else + ld_shlibs_GCJ=no + fi ;; - esac - # FIXME: Relying on posixy $() will cause problems for - # cross-compilation, but unfortunately the echo tests do not - # yet detect zsh echo's removal of \ escapes. - archive_cmds='$nonopt $(test "x$module" = xyes && echo -bundle || echo -dynamiclib) $allow_undefined_flag -o $lib $libobjs $deplibs$linker_flags -install_name $rpath/$soname $verstring' - # We need to add '_' to the symbols in $export_symbols first - #archive_expsym_cmds="$archive_cmds"' && strip -s $export_symbols' - hardcode_direct=yes - hardcode_shlibpath_var=no - whole_archive_flag_spec='-all_load $convenience' - ;; - freebsd1*) - ld_shlibs=no - ;; + dgux*) + archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec_GCJ='-L$libdir' + hardcode_shlibpath_var_GCJ=no + ;; - # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor - # support. Future versions do this automatically, but an explicit c++rt0.o - # does not break anything, and helps significantly (at the cost of a little - # extra space). - freebsd2.2*) - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; + freebsd1*) + ld_shlibs_GCJ=no + ;; - # Unfortunately, older versions of FreeBSD 2 do not have this feature. - freebsd2*) - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=yes - hardcode_minus_L=yes - hardcode_shlibpath_var=no - ;; + # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor + # support. Future versions do this automatically, but an explicit c++rt0.o + # does not break anything, and helps significantly (at the cost of a little + # extra space). + freebsd2.2*) + archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' + hardcode_libdir_flag_spec_GCJ='-R$libdir' + hardcode_direct_GCJ=yes + hardcode_shlibpath_var_GCJ=no + ;; - # FreeBSD 3 and greater uses gcc -shared to do shared libraries. - freebsd*) - archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; + # Unfortunately, older versions of FreeBSD 2 do not have this feature. + freebsd2*) + archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct_GCJ=yes + hardcode_minus_L_GCJ=yes + hardcode_shlibpath_var_GCJ=no + ;; - hpux9* | hpux10* | hpux11*) - case $host_os in - hpux9*) archive_cmds='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ;; - *) archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' ;; - esac - hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' - hardcode_libdir_separator=: - hardcode_direct=yes - hardcode_minus_L=yes # Not in the search PATH, but as the default - # location of the library. - export_dynamic_flag_spec='${wl}-E' - ;; + # FreeBSD 3 and greater uses gcc -shared to do shared libraries. + freebsd* | kfreebsd*-gnu) + archive_cmds_GCJ='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' + hardcode_libdir_flag_spec_GCJ='-R$libdir' + hardcode_direct_GCJ=yes + hardcode_shlibpath_var_GCJ=no + ;; - irix5* | irix6*) - if test "$GCC" = yes; then - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - else - archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - fi - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator=: - link_all_deplibs=yes - ;; + hpux9*) + if test "$GCC" = yes; then + archive_cmds_GCJ='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + else + archive_cmds_GCJ='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + fi + hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir' + hardcode_libdir_separator_GCJ=: + hardcode_direct_GCJ=yes + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L_GCJ=yes + export_dynamic_flag_spec_GCJ='${wl}-E' + ;; - netbsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out - else - archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF - fi - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; + hpux10* | hpux11*) + if test "$GCC" = yes -a "$with_gnu_ld" = no; then + case "$host_cpu" in + hppa*64*|ia64*) + archive_cmds_GCJ='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + archive_cmds_GCJ='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + else + case "$host_cpu" in + hppa*64*|ia64*) + archive_cmds_GCJ='$LD -b +h $soname -o $lib $libobjs $deplibs $linker_flags' + ;; + *) + archive_cmds_GCJ='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' + ;; + esac + fi + if test "$with_gnu_ld" = no; then + case "$host_cpu" in + hppa*64*) + hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir' + hardcode_libdir_flag_spec_ld_GCJ='+b $libdir' + hardcode_libdir_separator_GCJ=: + hardcode_direct_GCJ=no + hardcode_shlibpath_var_GCJ=no + ;; + ia64*) + hardcode_libdir_flag_spec_GCJ='-L$libdir' + hardcode_direct_GCJ=no + hardcode_shlibpath_var_GCJ=no + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L_GCJ=yes + ;; + *) + hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir' + hardcode_libdir_separator_GCJ=: + hardcode_direct_GCJ=yes + export_dynamic_flag_spec_GCJ='${wl}-E' + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L_GCJ=yes + ;; + esac + fi + ;; - newsos6) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=yes - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator=: - hardcode_shlibpath_var=no - ;; + irix5* | irix6* | nonstopux*) + if test "$GCC" = yes; then + archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + else + archive_cmds_GCJ='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + hardcode_libdir_flag_spec_ld_GCJ='-rpath $libdir' + fi + hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator_GCJ=: + link_all_deplibs_GCJ=yes + ;; - openbsd*) - hardcode_direct=yes - hardcode_shlibpath_var=no - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec='${wl}-rpath,$libdir' - export_dynamic_flag_spec='${wl}-E' - else - case "$host_os" in - openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec='-R$libdir' - ;; - *) - archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec='${wl}-rpath,$libdir' - ;; - esac - fi - ;; + netbsd* | knetbsd*-gnu) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out + else + archive_cmds_GCJ='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF + fi + hardcode_libdir_flag_spec_GCJ='-R$libdir' + hardcode_direct_GCJ=yes + hardcode_shlibpath_var_GCJ=no + ;; - os2*) - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - allow_undefined_flag=unsupported - archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' - old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' - ;; + newsos6) + archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct_GCJ=yes + hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator_GCJ=: + hardcode_shlibpath_var_GCJ=no + ;; - osf3*) - if test "$GCC" = yes; then - allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - else - allow_undefined_flag=' -expect_unresolved \*' - archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - fi - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator=: - ;; + openbsd*) + hardcode_direct_GCJ=yes + hardcode_shlibpath_var_GCJ=no + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + archive_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir' + export_dynamic_flag_spec_GCJ='${wl}-E' + else + case $host_os in + openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) + archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec_GCJ='-R$libdir' + ;; + *) + archive_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir' + ;; + esac + fi + ;; - osf4* | osf5*) # as osf3* with the addition of -msym flag - if test "$GCC" = yes; then - allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - else - allow_undefined_flag=' -expect_unresolved \*' - archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - archive_expsym_cmds='for i in `cat $export_symbols`; do printf "-exported_symbol " >> $lib.exp; echo "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ - $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp' + os2*) + hardcode_libdir_flag_spec_GCJ='-L$libdir' + hardcode_minus_L_GCJ=yes + allow_undefined_flag_GCJ=unsupported + archive_cmds_GCJ='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' + old_archive_From_new_cmds_GCJ='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' + ;; - #Both c and cxx compiler support -rpath directly - hardcode_libdir_flag_spec='-rpath $libdir' - fi - hardcode_libdir_separator=: - ;; + osf3*) + if test "$GCC" = yes; then + allow_undefined_flag_GCJ=' ${wl}-expect_unresolved ${wl}\*' + archive_cmds_GCJ='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + else + allow_undefined_flag_GCJ=' -expect_unresolved \*' + archive_cmds_GCJ='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + fi + hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator_GCJ=: + ;; - sco3.2v5*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_shlibpath_var=no - runpath_var=LD_RUN_PATH - hardcode_runpath_var=yes - export_dynamic_flag_spec='${wl}-Bexport' - ;; + osf4* | osf5*) # as osf3* with the addition of -msym flag + if test "$GCC" = yes; then + allow_undefined_flag_GCJ=' ${wl}-expect_unresolved ${wl}\*' + archive_cmds_GCJ='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir' + else + allow_undefined_flag_GCJ=' -expect_unresolved \*' + archive_cmds_GCJ='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + archive_expsym_cmds_GCJ='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ + $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp' - solaris*) - # gcc --version < 3.0 without binutils cannot create self contained - # shared libraries reliably, requiring libgcc.a to resolve some of - # the object symbols generated in some cases. Libraries that use - # assert need libgcc.a to resolve __eprintf, for example. Linking - # a copy of libgcc.a into every shared library to guarantee resolving - # such symbols causes other problems: According to Tim Van Holder - # , C++ libraries end up with a separate - # (to the application) exception stack for one thing. - no_undefined_flag=' -z defs' - if test "$GCC" = yes; then - case `$CC --version 2>/dev/null` in - [12].*) - cat <&2 + # Both c and cxx compiler support -rpath directly + hardcode_libdir_flag_spec_GCJ='-rpath $libdir' + fi + hardcode_libdir_separator_GCJ=: + ;; -*** Warning: Releases of GCC earlier than version 3.0 cannot reliably -*** create self contained shared libraries on Solaris systems, without -*** introducing a dependency on libgcc.a. Therefore, libtool is disabling -*** -no-undefined support, which will at least allow you to build shared -*** libraries. However, you may find that when you link such libraries -*** into an application without using GCC, you have to manually add -*** \`gcc --print-libgcc-file-name\` to the link command. We urge you to -*** upgrade to a newer version of GCC. Another option is to rebuild your -*** current GCC to use the GNU linker from GNU binutils 2.9.1 or newer. + sco3.2v5*) + archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_shlibpath_var_GCJ=no + export_dynamic_flag_spec_GCJ='${wl}-Bexport' + runpath_var=LD_RUN_PATH + hardcode_runpath_var=yes + ;; -EOF - no_undefined_flag= - ;; + solaris*) + no_undefined_flag_GCJ=' -z text' + if test "$GCC" = yes; then + archive_cmds_GCJ='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds_GCJ='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp' + else + archive_cmds_GCJ='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' + archive_expsym_cmds_GCJ='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' + fi + hardcode_libdir_flag_spec_GCJ='-R$libdir' + hardcode_shlibpath_var_GCJ=no + case $host_os in + solaris2.[0-5] | solaris2.[0-5].*) ;; + *) # Supported since Solaris 2.6 (maybe 2.5.1?) + whole_archive_flag_spec_GCJ='-z allextract$convenience -z defaultextract' ;; esac - fi - # $CC -shared without GNU ld will not create a library from C++ - # object files and a static libstdc++, better avoid it by now - archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' - archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' - hardcode_libdir_flag_spec='-R$libdir' - hardcode_shlibpath_var=no - case $host_os in - solaris2.[0-5] | solaris2.[0-5].*) ;; - *) # Supported since Solaris 2.6 (maybe 2.5.1?) - whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ;; - esac - link_all_deplibs=yes - ;; + link_all_deplibs_GCJ=yes + ;; - sunos4*) - if test "x$host_vendor" = xsequent; then - # Use $CC to link under sequent, because it throws in some extra .o - # files that make .init and .fini sections work. - archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' - fi - hardcode_libdir_flag_spec='-L$libdir' - hardcode_direct=yes - hardcode_minus_L=yes - hardcode_shlibpath_var=no - ;; + sunos4*) + if test "x$host_vendor" = xsequent; then + # Use $CC to link under sequent, because it throws in some extra .o + # files that make .init and .fini sections work. + archive_cmds_GCJ='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds_GCJ='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' + fi + hardcode_libdir_flag_spec_GCJ='-L$libdir' + hardcode_direct_GCJ=yes + hardcode_minus_L_GCJ=yes + hardcode_shlibpath_var_GCJ=no + ;; - sysv4) - if test "x$host_vendor" = xsno; then - archive_cmds='$LD -G -Bsymbolic -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=yes # is this really true??? - else - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=no #Motorola manual says yes, but my tests say they lie - fi - runpath_var='LD_RUN_PATH' - hardcode_shlibpath_var=no - ;; + sysv4) + case $host_vendor in + sni) + archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct_GCJ=yes # is this really true??? + ;; + siemens) + ## LD is ld it makes a PLAMLIB + ## CC just makes a GrossModule. + archive_cmds_GCJ='$LD -G -o $lib $libobjs $deplibs $linker_flags' + reload_cmds_GCJ='$CC -r -o $output$reload_objs' + hardcode_direct_GCJ=no + ;; + motorola) + archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct_GCJ=no #Motorola manual says yes, but my tests say they lie + ;; + esac + runpath_var='LD_RUN_PATH' + hardcode_shlibpath_var_GCJ=no + ;; - sysv4.3*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_shlibpath_var=no - export_dynamic_flag_spec='-Bexport' - ;; - - sysv5*) - no_undefined_flag=' -z text' - # $CC -shared without GNU ld will not create a library from C++ - # object files and a static libstdc++, better avoid it by now - archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' - archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' - hardcode_libdir_flag_spec= - hardcode_shlibpath_var=no - runpath_var='LD_RUN_PATH' - ;; - - uts4*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_shlibpath_var=no - ;; + sysv4.3*) + archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_shlibpath_var_GCJ=no + export_dynamic_flag_spec_GCJ='-Bexport' + ;; - dgux*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_shlibpath_var=no - ;; + sysv4*MP*) + if test -d /usr/nec; then + archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_shlibpath_var_GCJ=no + runpath_var=LD_RUN_PATH + hardcode_runpath_var=yes + ld_shlibs_GCJ=yes + fi + ;; - sysv4*MP*) - if test -d /usr/nec; then - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_shlibpath_var=no - runpath_var=LD_RUN_PATH + sysv4.2uw2*) + archive_cmds_GCJ='$LD -G -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct_GCJ=yes + hardcode_minus_L_GCJ=no + hardcode_shlibpath_var_GCJ=no hardcode_runpath_var=yes - ld_shlibs=yes - fi - ;; - - sysv4.2uw2*) - archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=yes - hardcode_minus_L=no - hardcode_shlibpath_var=no - hardcode_runpath_var=yes - runpath_var=LD_RUN_PATH - ;; + runpath_var=LD_RUN_PATH + ;; - sysv5uw7* | unixware7*) - no_undefined_flag='${wl}-z ${wl}text' - if test "$GCC" = yes; then - archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - fi - runpath_var='LD_RUN_PATH' - hardcode_shlibpath_var=no - ;; + sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[78]* | unixware7*) + no_undefined_flag_GCJ='${wl}-z ${wl}text' + if test "$GCC" = yes; then + archive_cmds_GCJ='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds_GCJ='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + fi + runpath_var='LD_RUN_PATH' + hardcode_shlibpath_var_GCJ=no + ;; - *) - ld_shlibs=no - ;; - esac -fi -echo "$as_me:$LINENO: result: $ld_shlibs" >&5 -echo "${ECHO_T}$ld_shlibs" >&6 -test "$ld_shlibs" = no && can_build_shared=no + sysv5*) + no_undefined_flag_GCJ=' -z text' + # $CC -shared without GNU ld will not create a library from C++ + # object files and a static libstdc++, better avoid it by now + archive_cmds_GCJ='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' + archive_expsym_cmds_GCJ='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' + hardcode_libdir_flag_spec_GCJ= + hardcode_shlibpath_var_GCJ=no + runpath_var='LD_RUN_PATH' + ;; -# Check hardcoding attributes. -echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 -echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6 -hardcode_action= -if test -n "$hardcode_libdir_flag_spec" || \ - test -n "$runpath_var"; then + uts4*) + archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec_GCJ='-L$libdir' + hardcode_shlibpath_var_GCJ=no + ;; - # We can hardcode non-existant directories. - if test "$hardcode_direct" != no && - # If the only mechanism to avoid hardcoding is shlibpath_var, we - # have to relink, otherwise we might link with an installed library - # when we should be linking with a yet-to-be-installed one - ## test "$hardcode_shlibpath_var" != no && - test "$hardcode_minus_L" != no; then - # Linking always hardcodes the temporary library directory. - hardcode_action=relink - else - # We can link without hardcoding, and we can hardcode nonexisting dirs. - hardcode_action=immediate + *) + ld_shlibs_GCJ=no + ;; + esac fi -else - # We cannot hardcode anything, or else we can only hardcode existing - # directories. - hardcode_action=unsupported -fi -echo "$as_me:$LINENO: result: $hardcode_action" >&5 -echo "${ECHO_T}$hardcode_action" >&6 -striplib= -old_striplib= -echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5 -echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6 -if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then - test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" - test -z "$striplib" && striplib="$STRIP --strip-unneeded" - echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 +echo "$as_me:$LINENO: result: $ld_shlibs_GCJ" >&5 +echo "${ECHO_T}$ld_shlibs_GCJ" >&6 +test "$ld_shlibs_GCJ" = no && can_build_shared=no + +variables_saved_for_relink="PATH $shlibpath_var $runpath_var" +if test "$GCC" = yes; then + variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" fi -reload_cmds='$LD$reload_flag -o $output$reload_objs' -test -z "$deplibs_check_method" && deplibs_check_method=unknown +# +# Do we need to explicitly link libc? +# +case "x$archive_cmds_need_lc_GCJ" in +x|xyes) + # Assume -lc should be added + archive_cmds_need_lc_GCJ=yes + + if test "$enable_shared" = yes && test "$GCC" = yes; then + case $archive_cmds_GCJ in + *'~'*) + # FIXME: we may have to deal with multi-command sequences. + ;; + '$CC '*) + # Test whether the compiler implicitly links with -lc since on some + # systems, -lgcc has to come before -lc. If gcc already passes -lc + # to ld, don't add -lc before -lgcc. + echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 +echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6 + $rm conftest* + printf "$lt_simple_compile_test_code" > conftest.$ac_ext + + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } 2>conftest.err; then + soname=conftest + lib=conftest + libobjs=conftest.$ac_objext + deplibs= + wl=$lt_prog_compiler_wl_GCJ + compiler_flags=-v + linker_flags=-v + verstring= + output_objdir=. + libname=conftest + lt_save_allow_undefined_flag=$allow_undefined_flag_GCJ + allow_undefined_flag_GCJ= + if { (eval echo "$as_me:$LINENO: \"$archive_cmds_GCJ 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5 + (eval $archive_cmds_GCJ 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } + then + archive_cmds_need_lc_GCJ=no + else + archive_cmds_need_lc_GCJ=yes + fi + allow_undefined_flag_GCJ=$lt_save_allow_undefined_flag + else + cat conftest.err 1>&5 + fi + $rm conftest* + echo "$as_me:$LINENO: result: $archive_cmds_need_lc_GCJ" >&5 +echo "${ECHO_T}$archive_cmds_need_lc_GCJ" >&6 + ;; + esac + fi + ;; +esac -# PORTME Fill in your ld.so characteristics echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6 library_names_spec= libname_spec='lib$name' soname_spec= +shrext_cmds=".so" postinstall_cmds= postuninstall_cmds= finish_cmds= @@ -6137,23 +16373,45 @@ version_type=none dynamic_linker="$host_os ld.so" sys_lib_dlsearch_path_spec="/lib /usr/lib" -sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" +if test "$GCC" = yes; then + sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` + if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then + # if the path contains ";" then we assume it to be the separator + # otherwise default to the standard path separator (i.e. ":") - it is + # assumed that no part of a normal pathname contains ";" but that should + # okay in the real world where ";" in dirpaths is itself problematic. + sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` + else + sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + fi +else + sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" +fi +need_lib_prefix=unknown +hardcode_into_libs=no + +# when you set need_version to no, make sure it does not cause -set_version +# flags to be left without arguments +need_version=unknown case $host_os in aix3*) version_type=linux - library_names_spec='${libname}${release}.so$versuffix $libname.a' + library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' shlibpath_var=LIBPATH - # AIX has no versioning support, so we append a major version to the name. - soname_spec='${libname}${release}.so$major' + # AIX 3 has no versioning support, so we append a major version to the name. + soname_spec='${libname}${release}${shared_ext}$major' ;; aix4* | aix5*) version_type=linux + need_lib_prefix=no + need_version=no + hardcode_into_libs=yes if test "$host_cpu" = ia64; then # AIX 5 supports IA64 - library_names_spec='${libname}${release}.so$major ${libname}${release}.so$versuffix $libname.so' + library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH else # With GCC up to 2.95.x, collect2 would create an import file @@ -6163,29 +16421,28 @@ # development snapshots of GCC prior to 3.0. case $host_os in aix4 | aix4.[01] | aix4.[01].*) - if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' - echo ' yes ' - echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then - : - else - can_build_shared=no - fi - ;; + if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' + echo ' yes ' + echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then + : + else + can_build_shared=no + fi + ;; esac - # AIX (on Power*) has no versioning support, so currently we can - # not hardcode correct soname into executable. Probably we can - # add versioning support to collect2, so additional links can - # be useful in future. + # AIX (on Power*) has no versioning support, so currently we can not hardcode correct + # soname into executable. Probably we can add versioning support to + # collect2, so additional links can be useful in future. if test "$aix_use_runtimelinking" = yes; then # If using run time linking (on AIX 4.2 or later) use lib.so # instead of lib.a to let people know that these are not # typical AIX shared libraries. - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' else # We preserve .a as extension for shared libraries through AIX4.2 # and later when we are not doing run time linking. library_names_spec='${libname}${release}.a $libname.a' - soname_spec='${libname}${release}.so$major' + soname_spec='${libname}${release}${shared_ext}$major' fi shlibpath_var=LIBPATH fi @@ -6194,11 +16451,11 @@ amigaos*) library_names_spec='$libname.ixlibrary $libname.a' # Create ${libname}_ixlibrary.a entries in /sys/libs. - finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done' + finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' ;; beos*) - library_names_spec='${libname}.so' + library_names_spec='${libname}${shared_ext}' dynamic_linker="$host_os ld.so" shlibpath_var=LIBRARY_PATH ;; @@ -6206,13 +16463,12 @@ bsdi4*) version_type=linux need_version=no - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" - export_dynamic_flag_spec=-rdynamic # the default ld.so.conf also contains /usr/contrib/lib and # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow # libtool to hard-code these into programs @@ -6220,29 +16476,55 @@ cygwin* | mingw* | pw32*) version_type=windows + shrext_cmds=".dll" need_version=no need_lib_prefix=no + case $GCC,$host_os in - yes,cygwin*) + yes,cygwin* | yes,mingw* | yes,pw32*) library_names_spec='$libname.dll.a' - soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll' - postinstall_cmds='dlpath=`bash 2>&1 -c '\''. $dir/${file}i;echo \$dlname'\''`~ + # DLL is installed to $(libdir)/../bin by postinstall_cmds + postinstall_cmds='base_file=`basename \${file}`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ - $install_prog .libs/$dlname \$dldir/$dlname' - postuninstall_cmds='dldll=`bash 2>&1 -c '\''. $file; echo \$dlname'\''`~ + $install_prog $dir/$dlname \$dldir/$dlname' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ dlpath=$dir/\$dldll~ $rm \$dlpath' + shlibpath_overrides_runpath=yes + + case $host_os in + cygwin*) + # Cygwin DLLs use 'cyg' prefix rather than 'lib' + soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" + ;; + mingw*) + # MinGW DLLs use traditional 'lib' prefix + soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` + if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then + # It is most probably a Windows format PATH printed by + # mingw gcc, but we are running on Cygwin. Gcc prints its search + # path with ; separators, and with drive letters. We can handle the + # drive letters (cygwin fileutils understands them), so leave them, + # especially as we might pass files found there to a mingw objdump, + # which wouldn't understand a cygwinified path. Ahh. + sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` + else + sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + fi + ;; + pw32*) + # pw32 DLLs use 'pw' prefix rather than 'lib' + library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/./-/g'`${versuffix}${shared_ext}' + ;; + esac ;; - yes,mingw*) - library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll' - sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | sed -e "s/^libraries://" -e "s/;/ /g"` - ;; - yes,pw32*) - library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | sed -e 's/./-/g'`${versuffix}.dll' - ;; + *) - library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll $libname.lib' + library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' ;; esac dynamic_linker='Win32 ld.exe' @@ -6255,30 +16537,56 @@ version_type=darwin need_lib_prefix=no need_version=no - # FIXME: Relying on posixy $() will cause problems for - # cross-compilation, but unfortunately the echo tests do not - # yet detect zsh echo's removal of \ escapes. - library_names_spec='${libname}${release}${versuffix}.$(test .$module = .yes && echo so || echo dylib) ${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib) ${libname}.$(test .$module = .yes && echo so || echo dylib)' - soname_spec='${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib)' + library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext' + soname_spec='${libname}${release}${major}$shared_ext' shlibpath_overrides_runpath=yes shlibpath_var=DYLD_LIBRARY_PATH + shrext_cmds='$(test .$module = .yes && echo .so || echo .dylib)' + # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same. + if test "$GCC" = yes; then + sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"` + else + sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib' + fi + sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' + ;; + +dgux*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH ;; freebsd1*) dynamic_linker=no ;; +kfreebsd*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='GNU ld.so' + ;; + freebsd*) objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout` version_type=freebsd-$objformat case $version_type in freebsd-elf*) - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' need_version=no need_lib_prefix=no ;; freebsd-*) - library_names_spec='${libname}${release}.so$versuffix $libname.so$versuffix' + library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' need_version=yes ;; esac @@ -6287,7 +16595,11 @@ freebsd2*) shlibpath_overrides_runpath=yes ;; - *) + freebsd3.01* | freebsdelf3.01*) + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + *) # from 3.2 on shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; @@ -6298,8 +16610,8 @@ version_type=linux need_lib_prefix=no need_version=no - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so${major} ${libname}.so' - soname_spec='${libname}${release}.so$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH hardcode_into_libs=yes ;; @@ -6307,33 +16619,75 @@ hpux9* | hpux10* | hpux11*) # Give a soname corresponding to the major version so that dld.sl refuses to # link against other versions. - dynamic_linker="$host_os dld.sl" version_type=sunos need_lib_prefix=no need_version=no - shlibpath_var=SHLIB_PATH - shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH - library_names_spec='${libname}${release}.sl$versuffix ${libname}${release}.sl$major $libname.sl' - soname_spec='${libname}${release}.sl$major' + case "$host_cpu" in + ia64*) + shrext_cmds='.so' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.so" + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + if test "X$HPUX_IA64_MODE" = X32; then + sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" + else + sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" + fi + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + hppa*64*) + shrext_cmds='.sl' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.sl" + shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + *) + shrext_cmds='.sl' + dynamic_linker="$host_os dld.sl" + shlibpath_var=SHLIB_PATH + shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + ;; + esac # HP-UX runs *really* slowly unless shared libraries are mode 555. postinstall_cmds='chmod 555 $lib' ;; -irix5* | irix6*) - version_type=irix +irix5* | irix6* | nonstopux*) + case $host_os in + nonstopux*) version_type=nonstopux ;; + *) + if test "$lt_cv_prog_gnu_ld" = yes; then + version_type=linux + else + version_type=irix + fi ;; + esac need_lib_prefix=no need_version=no - soname_spec='${libname}${release}.so$major' - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so $libname.so' + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' case $host_os in - irix5*) + irix5* | nonstopux*) libsuff= shlibsuff= ;; *) case $LD in # libtool.m4 will add one of these switches to LD - *-32|*"-32 ") libsuff= shlibsuff= libmagic=32-bit;; - *-n32|*"-n32 ") libsuff=32 shlibsuff=N32 libmagic=N32;; - *-64|*"-64 ") libsuff=64 shlibsuff=64 libmagic=64-bit;; + *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") + libsuff= shlibsuff= libmagic=32-bit;; + *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") + libsuff=32 shlibsuff=N32 libmagic=N32;; + *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") + libsuff=64 shlibsuff=64 libmagic=64-bit;; *) libsuff= shlibsuff= libmagic=never-match;; esac ;; @@ -6342,20 +16696,21 @@ shlibpath_overrides_runpath=no sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" + hardcode_into_libs=yes ;; # No shared lib support for Linux oldld, aout, or coff. -linux-gnuoldld* | linux-gnuaout* | linux-gnucoff*) +linux*oldld* | linux*aout* | linux*coff*) dynamic_linker=no ;; # This must be Linux ELF. -linux-gnu*) +linux*) version_type=linux need_lib_prefix=no need_version=no - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no @@ -6364,6 +16719,12 @@ # before this can be enabled. hardcode_into_libs=yes + # Append ld.so.conf contents to the search path + if test -f /etc/ld.so.conf; then + lt_ld_extra=`$SED -e 's/:,\t/ /g;s/=^=*$//;s/=^= * / /g' /etc/ld.so.conf | tr '\n' ' '` + sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" + fi + # We used to test for /lib/ld.so.1 and disable shared libraries on # powerpc, because MkLinux only supported shared libraries with the # GNU dynamic linker. Since this was broken with cross compilers, @@ -6373,17 +16734,29 @@ dynamic_linker='GNU/Linux ld.so' ;; +knetbsd*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='GNU ld.so' + ;; + netbsd*) version_type=sunos need_lib_prefix=no need_version=no if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' dynamic_linker='NetBSD (a.out) ld.so' else - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so ${libname}.so' - soname_spec='${libname}${release}.so$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' dynamic_linker='NetBSD ld.elf_so' fi shlibpath_var=LD_LIBRARY_PATH @@ -6393,7 +16766,17 @@ newsos6) version_type=linux - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + ;; + +nto-qnx*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes ;; @@ -6401,37 +16784,39 @@ openbsd*) version_type=sunos need_lib_prefix=no - need_version=no + need_version=yes + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + shlibpath_var=LD_LIBRARY_PATH if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - case "$host_os" in - openbsd2.[89] | openbsd2.[89].*) - shlibpath_overrides_runpath=no - ;; - *) - shlibpath_overrides_runpath=yes - ;; - esac + case $host_os in + openbsd2.[89] | openbsd2.[89].*) + shlibpath_overrides_runpath=no + ;; + *) + shlibpath_overrides_runpath=yes + ;; + esac else shlibpath_overrides_runpath=yes fi - library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - shlibpath_var=LD_LIBRARY_PATH ;; os2*) libname_spec='$name' + shrext_cmds=".dll" need_lib_prefix=no - library_names_spec='$libname.dll $libname.a' + library_names_spec='$libname${shared_ext} $libname.a' dynamic_linker='OS/2 ld.exe' shlibpath_var=LIBPATH ;; osf3* | osf4* | osf5*) version_type=osf + need_lib_prefix=no need_version=no - soname_spec='${libname}${release}.so' - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so' + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" @@ -6439,8 +16824,8 @@ sco3.2v5*) version_type=osf - soname_spec='${libname}${release}.so$major' - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH ;; @@ -6448,8 +16833,8 @@ version_type=linux need_lib_prefix=no need_version=no - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes @@ -6459,7 +16844,7 @@ sunos4*) version_type=sunos - library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes @@ -6471,12 +16856,18 @@ sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) version_type=linux - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH case $host_vendor in sni) shlibpath_overrides_runpath=no + need_lib_prefix=no + export_dynamic_flag_spec='${wl}-Blargedynsym' + runpath_var=LD_RUN_PATH + ;; + siemens) + need_lib_prefix=no ;; motorola) need_lib_prefix=no @@ -6487,31 +16878,22 @@ esac ;; -uts4*) - version_type=linux - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - shlibpath_var=LD_LIBRARY_PATH - ;; - -dgux*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - shlibpath_var=LD_LIBRARY_PATH - ;; - sysv4*MP*) if test -d /usr/nec ;then version_type=linux - library_names_spec='$libname.so.$versuffix $libname.so.$major $libname.so' - soname_spec='$libname.so.$major' + library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' + soname_spec='$libname${shared_ext}.$major' shlibpath_var=LD_LIBRARY_PATH fi ;; +uts4*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + *) dynamic_linker=no ;; @@ -6520,44 +16902,35 @@ echo "${ECHO_T}$dynamic_linker" >&6 test "$dynamic_linker" = no && can_build_shared=no -# Report the final consequences. -echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5 -echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6 -echo "$as_me:$LINENO: result: $can_build_shared" >&5 -echo "${ECHO_T}$can_build_shared" >&6 - -echo "$as_me:$LINENO: checking whether to build shared libraries" >&5 -echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6 -test "$can_build_shared" = "no" && enable_shared=no - -# On AIX, shared libraries and static libraries use the same namespace, and -# are all built from PIC. -case "$host_os" in -aix3*) - test "$enable_shared" = yes && enable_static=no - if test -n "$RANLIB"; then - archive_cmds="$archive_cmds~\$RANLIB \$lib" - postinstall_cmds='$RANLIB $lib' - fi - ;; +echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 +echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6 +hardcode_action_GCJ= +if test -n "$hardcode_libdir_flag_spec_GCJ" || \ + test -n "$runpath_var GCJ" || \ + test "X$hardcode_automatic_GCJ"="Xyes" ; then -aix4*) - if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then - test "$enable_shared" = yes && enable_static=no + # We can hardcode non-existant directories. + if test "$hardcode_direct_GCJ" != no && + # If the only mechanism to avoid hardcoding is shlibpath_var, we + # have to relink, otherwise we might link with an installed library + # when we should be linking with a yet-to-be-installed one + ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, GCJ)" != no && + test "$hardcode_minus_L_GCJ" != no; then + # Linking always hardcodes the temporary library directory. + hardcode_action_GCJ=relink + else + # We can link without hardcoding, and we can hardcode nonexisting dirs. + hardcode_action_GCJ=immediate fi - ;; -esac -echo "$as_me:$LINENO: result: $enable_shared" >&5 -echo "${ECHO_T}$enable_shared" >&6 - -echo "$as_me:$LINENO: checking whether to build static libraries" >&5 -echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6 -# Make sure either enable_shared or enable_static is yes. -test "$enable_shared" = yes || enable_static=yes -echo "$as_me:$LINENO: result: $enable_static" >&5 -echo "${ECHO_T}$enable_static" >&6 +else + # We cannot hardcode anything, or else we can only hardcode existing + # directories. + hardcode_action_GCJ=unsupported +fi +echo "$as_me:$LINENO: result: $hardcode_action_GCJ" >&5 +echo "${ECHO_T}$hardcode_action_GCJ" >&6 -if test "$hardcode_action" = relink; then +if test "$hardcode_action_GCJ" = relink; then # Fast installation is not supported enable_fast_install=no elif test "$shlibpath_overrides_runpath" = yes || @@ -6566,9 +16939,33 @@ enable_fast_install=needless fi -variables_saved_for_relink="PATH $shlibpath_var $runpath_var" -if test "$GCC" = yes; then - variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" +striplib= +old_striplib= +echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5 +echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6 +if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then + test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" + test -z "$striplib" && striplib="$STRIP --strip-unneeded" + echo "$as_me:$LINENO: result: yes" >&5 +echo "${ECHO_T}yes" >&6 +else +# FIXME - insert some real tests, host_os isn't really good enough + case $host_os in + darwin*) + if test -n "$STRIP" ; then + striplib="$STRIP -x" + echo "$as_me:$LINENO: result: yes" >&5 +echo "${ECHO_T}yes" >&6 + else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + ;; + *) + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 + ;; + esac fi if test "x$enable_dlopen" != xyes; then @@ -6586,11 +16983,93 @@ lt_cv_dlopen_self=yes ;; - cygwin* | mingw* | pw32*) + mingw* | pw32*) lt_cv_dlopen="LoadLibrary" lt_cv_dlopen_libs= ;; + cygwin*) + lt_cv_dlopen="dlopen" + lt_cv_dlopen_libs= + ;; + + darwin*) + # if libdl is installed we need to link against it + echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 +echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6 +if test "${ac_cv_lib_dl_dlopen+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldl $LIBS" +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char dlopen (); +int +main () +{ +dlopen (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_lib_dl_dlopen=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_lib_dl_dlopen=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 +echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6 +if test $ac_cv_lib_dl_dlopen = yes; then + lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" +else + + lt_cv_dlopen="dyld" + lt_cv_dlopen_libs= + lt_cv_dlopen_self=yes + +fi + + ;; + *) echo "$as_me:$LINENO: checking for shl_load" >&5 echo $ECHO_N "checking for shl_load... $ECHO_C" >&6 @@ -6598,49 +17077,72 @@ echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* Define shl_load to an innocuous variant, in case declares shl_load. + For example, HP-UX 11i declares gettimeofday. */ +#define shl_load innocuous_shl_load + /* System header to define __stub macros and hopefully few prototypes, - which can conflict with char shl_load (); below. */ -#include + which can conflict with char shl_load (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ + +#ifdef __STDC__ +# include +#else +# include +#endif + +#undef shl_load + /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus extern "C" +{ #endif /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char shl_load (); -char (*f) (); - -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif -int -main () -{ /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_shl_load) || defined (__stub___shl_load) choke me #else -f = shl_load; +char (*f) () = shl_load; +#endif +#ifdef __cplusplus +} #endif +int +main () +{ +return f != shl_load; ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 + (eval $ac_link) 2>conftest.er1 ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -s conftest$ac_exeext' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -6649,10 +17151,12 @@ ac_cv_func_shl_load=yes else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ac_cv_func_shl_load=no fi -rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext fi echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5 echo "${ECHO_T}$ac_cv_func_shl_load" >&6 @@ -6667,8 +17171,11 @@ ac_check_lib_save_LIBS=$LIBS LIBS="-ldld $LIBS" cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus @@ -6677,12 +17184,6 @@ /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char shl_load (); -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif int main () { @@ -6693,11 +17194,20 @@ _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 + (eval $ac_link) 2>conftest.er1 ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -s conftest$ac_exeext' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -6706,10 +17216,12 @@ ac_cv_lib_dld_shl_load=yes else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ac_cv_lib_dld_shl_load=no fi -rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5 @@ -6723,49 +17235,72 @@ echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* Define dlopen to an innocuous variant, in case declares dlopen. + For example, HP-UX 11i declares gettimeofday. */ +#define dlopen innocuous_dlopen + /* System header to define __stub macros and hopefully few prototypes, - which can conflict with char dlopen (); below. */ -#include + which can conflict with char dlopen (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ + +#ifdef __STDC__ +# include +#else +# include +#endif + +#undef dlopen + /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus extern "C" +{ #endif /* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char dlopen (); -char (*f) (); - -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif -int -main () -{ + builtin and then its argument prototype would still apply. */ +char dlopen (); /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_dlopen) || defined (__stub___dlopen) choke me #else -f = dlopen; +char (*f) () = dlopen; +#endif +#ifdef __cplusplus +} #endif +int +main () +{ +return f != dlopen; ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 + (eval $ac_link) 2>conftest.er1 ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -s conftest$ac_exeext' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -6774,10 +17309,12 @@ ac_cv_func_dlopen=yes else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ac_cv_func_dlopen=no fi -rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext fi echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5 echo "${ECHO_T}$ac_cv_func_dlopen" >&6 @@ -6792,8 +17329,11 @@ ac_check_lib_save_LIBS=$LIBS LIBS="-ldl $LIBS" cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus @@ -6802,12 +17342,6 @@ /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char dlopen (); -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif int main () { @@ -6818,11 +17352,20 @@ _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 + (eval $ac_link) 2>conftest.er1 ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -s conftest$ac_exeext' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -6831,10 +17374,12 @@ ac_cv_lib_dl_dlopen=yes else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ac_cv_lib_dl_dlopen=no fi -rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 @@ -6850,8 +17395,11 @@ ac_check_lib_save_LIBS=$LIBS LIBS="-lsvld $LIBS" cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus @@ -6860,12 +17408,6 @@ /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char dlopen (); -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif int main () { @@ -6876,11 +17418,20 @@ _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 + (eval $ac_link) 2>conftest.er1 ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -s conftest$ac_exeext' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -6889,10 +17440,12 @@ ac_cv_lib_svld_dlopen=yes else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ac_cv_lib_svld_dlopen=no fi -rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5 @@ -6908,408 +17461,829 @@ ac_check_lib_save_LIBS=$LIBS LIBS="-ldld $LIBS" cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char dld_link (); +int +main () +{ +dld_link (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_lib_dld_dld_link=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_lib_dld_dld_link=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5 +echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6 +if test $ac_cv_lib_dld_dld_link = yes; then + lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld" +fi + + +fi + + +fi + + +fi + + +fi + + +fi + + ;; + esac + + if test "x$lt_cv_dlopen" != xno; then + enable_dlopen=yes + else + enable_dlopen=no + fi + + case $lt_cv_dlopen in + dlopen) + save_CPPFLAGS="$CPPFLAGS" + test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" + + save_LDFLAGS="$LDFLAGS" + eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" + + save_LIBS="$LIBS" + LIBS="$lt_cv_dlopen_libs $LIBS" + + echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5 +echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6 +if test "${lt_cv_dlopen_self+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test "$cross_compiling" = yes; then : + lt_cv_dlopen_self=cross +else + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 + lt_status=$lt_dlunknown + cat > conftest.$ac_ext < +#endif + +#include + +#ifdef RTLD_GLOBAL +# define LT_DLGLOBAL RTLD_GLOBAL +#else +# ifdef DL_GLOBAL +# define LT_DLGLOBAL DL_GLOBAL +# else +# define LT_DLGLOBAL 0 +# endif +#endif + +/* We may have to define LT_DLLAZY_OR_NOW in the command line if we + find out it does not work in some platform. */ +#ifndef LT_DLLAZY_OR_NOW +# ifdef RTLD_LAZY +# define LT_DLLAZY_OR_NOW RTLD_LAZY +# else +# ifdef DL_LAZY +# define LT_DLLAZY_OR_NOW DL_LAZY +# else +# ifdef RTLD_NOW +# define LT_DLLAZY_OR_NOW RTLD_NOW +# else +# ifdef DL_NOW +# define LT_DLLAZY_OR_NOW DL_NOW +# else +# define LT_DLLAZY_OR_NOW 0 +# endif +# endif +# endif +# endif +#endif + +#ifdef __cplusplus +extern "C" void exit (int); +#endif + +void fnord() { int i=42;} +int main () +{ + void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); + int status = $lt_dlunknown; + + if (self) + { + if (dlsym (self,"fnord")) status = $lt_dlno_uscore; + else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; + /* dlclose (self); */ + } + + exit (status); +} +EOF + if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then + (./conftest; exit; ) 2>/dev/null + lt_status=$? + case x$lt_status in + x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;; + x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;; + x$lt_unknown|x*) lt_cv_dlopen_self=no ;; + esac + else : + # compilation failed + lt_cv_dlopen_self=no + fi +fi +rm -fr conftest* + + +fi +echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5 +echo "${ECHO_T}$lt_cv_dlopen_self" >&6 + + if test "x$lt_cv_dlopen_self" = xyes; then + LDFLAGS="$LDFLAGS $link_static_flag" + echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5 +echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6 +if test "${lt_cv_dlopen_self_static+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test "$cross_compiling" = yes; then : + lt_cv_dlopen_self_static=cross +else + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 + lt_status=$lt_dlunknown + cat > conftest.$ac_ext < +#endif + +#include + +#ifdef RTLD_GLOBAL +# define LT_DLGLOBAL RTLD_GLOBAL +#else +# ifdef DL_GLOBAL +# define LT_DLGLOBAL DL_GLOBAL +# else +# define LT_DLGLOBAL 0 +# endif +#endif + +/* We may have to define LT_DLLAZY_OR_NOW in the command line if we + find out it does not work in some platform. */ +#ifndef LT_DLLAZY_OR_NOW +# ifdef RTLD_LAZY +# define LT_DLLAZY_OR_NOW RTLD_LAZY +# else +# ifdef DL_LAZY +# define LT_DLLAZY_OR_NOW DL_LAZY +# else +# ifdef RTLD_NOW +# define LT_DLLAZY_OR_NOW RTLD_NOW +# else +# ifdef DL_NOW +# define LT_DLLAZY_OR_NOW DL_NOW +# else +# define LT_DLLAZY_OR_NOW 0 +# endif +# endif +# endif +# endif +#endif + #ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char dld_link (); -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } +extern "C" void exit (int); #endif -int -main () + +void fnord() { int i=42;} +int main () { -dld_link (); - ; - return 0; + void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); + int status = $lt_dlunknown; + + if (self) + { + if (dlsym (self,"fnord")) status = $lt_dlno_uscore; + else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; + /* dlclose (self); */ + } + + exit (status); } -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +EOF + if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_dld_dld_link=yes -else - echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 -ac_cv_lib_dld_dld_link=no -fi -rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5 -echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6 -if test $ac_cv_lib_dld_dld_link = yes; then - lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld" + (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then + (./conftest; exit; ) 2>/dev/null + lt_status=$? + case x$lt_status in + x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;; + x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;; + x$lt_unknown|x*) lt_cv_dlopen_self_static=no ;; + esac + else : + # compilation failed + lt_cv_dlopen_self_static=no + fi fi +rm -fr conftest* fi +echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5 +echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6 + fi + CPPFLAGS="$save_CPPFLAGS" + LDFLAGS="$save_LDFLAGS" + LIBS="$save_LIBS" + ;; + esac -fi - + case $lt_cv_dlopen_self in + yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; + *) enable_dlopen_self=unknown ;; + esac + case $lt_cv_dlopen_self_static in + yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; + *) enable_dlopen_self_static=unknown ;; + esac fi -fi - +# The else clause should only fire when bootstrapping the +# libtool distribution, otherwise you forgot to ship ltmain.sh +# with your package, and you will get complaints that there are +# no rules to generate ltmain.sh. +if test -f "$ltmain"; then + # See if we are running on zsh, and set the options which allow our commands through + # without removal of \ escapes. + if test -n "${ZSH_VERSION+set}" ; then + setopt NO_GLOB_SUBST + fi + # Now quote all the things that may contain metacharacters while being + # careful not to overquote the AC_SUBSTed values. We take copies of the + # variables and quote the copies for generation of the libtool script. + for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC NM \ + SED SHELL STRIP \ + libname_spec library_names_spec soname_spec extract_expsyms_cmds \ + old_striplib striplib file_magic_cmd finish_cmds finish_eval \ + deplibs_check_method reload_flag reload_cmds need_locks \ + lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \ + lt_cv_sys_global_symbol_to_c_name_address \ + sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ + old_postinstall_cmds old_postuninstall_cmds \ + compiler_GCJ \ + CC_GCJ \ + LD_GCJ \ + lt_prog_compiler_wl_GCJ \ + lt_prog_compiler_pic_GCJ \ + lt_prog_compiler_static_GCJ \ + lt_prog_compiler_no_builtin_flag_GCJ \ + export_dynamic_flag_spec_GCJ \ + thread_safe_flag_spec_GCJ \ + whole_archive_flag_spec_GCJ \ + enable_shared_with_static_runtimes_GCJ \ + old_archive_cmds_GCJ \ + old_archive_from_new_cmds_GCJ \ + predep_objects_GCJ \ + postdep_objects_GCJ \ + predeps_GCJ \ + postdeps_GCJ \ + compiler_lib_search_path_GCJ \ + archive_cmds_GCJ \ + archive_expsym_cmds_GCJ \ + postinstall_cmds_GCJ \ + postuninstall_cmds_GCJ \ + old_archive_from_expsyms_cmds_GCJ \ + allow_undefined_flag_GCJ \ + no_undefined_flag_GCJ \ + export_symbols_cmds_GCJ \ + hardcode_libdir_flag_spec_GCJ \ + hardcode_libdir_flag_spec_ld_GCJ \ + hardcode_libdir_separator_GCJ \ + hardcode_automatic_GCJ \ + module_cmds_GCJ \ + module_expsym_cmds_GCJ \ + lt_cv_prog_compiler_c_o_GCJ \ + exclude_expsyms_GCJ \ + include_expsyms_GCJ; do -fi + case $var in + old_archive_cmds_GCJ | \ + old_archive_from_new_cmds_GCJ | \ + archive_cmds_GCJ | \ + archive_expsym_cmds_GCJ | \ + module_cmds_GCJ | \ + module_expsym_cmds_GCJ | \ + old_archive_from_expsyms_cmds_GCJ | \ + export_symbols_cmds_GCJ | \ + extract_expsyms_cmds | reload_cmds | finish_cmds | \ + postinstall_cmds | postuninstall_cmds | \ + old_postinstall_cmds | old_postuninstall_cmds | \ + sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) + # Double-quote double-evaled strings. + eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" + ;; + *) + eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" + ;; + esac + done + case $lt_echo in + *'\$0 --fallback-echo"') + lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'` ;; esac - if test "x$lt_cv_dlopen" != xno; then - enable_dlopen=yes - else - enable_dlopen=no - fi +cfgfile="$ofile" + + cat <<__EOF__ >> "$cfgfile" +# ### BEGIN LIBTOOL TAG CONFIG: $tagname + +# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: + +# Shell to use when invoking shell scripts. +SHELL=$lt_SHELL + +# Whether or not to build shared libraries. +build_libtool_libs=$enable_shared + +# Whether or not to build static libraries. +build_old_libs=$enable_static + +# Whether or not to add -lc for building shared libraries. +build_libtool_need_lc=$archive_cmds_need_lc_GCJ + +# Whether or not to disallow shared libs when runtime libs are static +allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_GCJ + +# Whether or not to optimize for fast installation. +fast_install=$enable_fast_install + +# The host system. +host_alias=$host_alias +host=$host + +# An echo program that does not interpret backslashes. +echo=$lt_echo + +# The archiver. +AR=$lt_AR +AR_FLAGS=$lt_AR_FLAGS + +# A C compiler. +LTCC=$lt_LTCC + +# A language-specific compiler. +CC=$lt_compiler_GCJ + +# Is the compiler the GNU C compiler? +with_gcc=$GCC_GCJ + +# An ERE matcher. +EGREP=$lt_EGREP + +# The linker used to build libraries. +LD=$lt_LD_GCJ + +# Whether we need hard or soft links. +LN_S=$lt_LN_S + +# A BSD-compatible nm program. +NM=$lt_NM + +# A symbol stripping program +STRIP=$lt_STRIP + +# Used to examine libraries when file_magic_cmd begins "file" +MAGIC_CMD=$MAGIC_CMD + +# Used on cygwin: DLL creation program. +DLLTOOL="$DLLTOOL" + +# Used on cygwin: object dumper. +OBJDUMP="$OBJDUMP" + +# Used on cygwin: assembler. +AS="$AS" + +# The name of the directory that contains temporary libtool files. +objdir=$objdir + +# How to create reloadable object files. +reload_flag=$lt_reload_flag +reload_cmds=$lt_reload_cmds + +# How to pass a linker flag through the compiler. +wl=$lt_lt_prog_compiler_wl_GCJ + +# Object file suffix (normally "o"). +objext="$ac_objext" + +# Old archive suffix (normally "a"). +libext="$libext" + +# Shared library suffix (normally ".so"). +shrext_cmds='$shrext_cmds' + +# Executable file suffix (normally ""). +exeext="$exeext" + +# Additional compiler flags for building library objects. +pic_flag=$lt_lt_prog_compiler_pic_GCJ +pic_mode=$pic_mode + +# What is the maximum length of a command? +max_cmd_len=$lt_cv_sys_max_cmd_len + +# Does compiler simultaneously support -c and -o options? +compiler_c_o=$lt_lt_cv_prog_compiler_c_o_GCJ + +# Must we lock files when doing compilation ? +need_locks=$lt_need_locks + +# Do we need the lib prefix for modules? +need_lib_prefix=$need_lib_prefix + +# Do we need a version for libraries? +need_version=$need_version + +# Whether dlopen is supported. +dlopen_support=$enable_dlopen + +# Whether dlopen of programs is supported. +dlopen_self=$enable_dlopen_self + +# Whether dlopen of statically linked programs is supported. +dlopen_self_static=$enable_dlopen_self_static + +# Compiler flag to prevent dynamic linking. +link_static_flag=$lt_lt_prog_compiler_static_GCJ + +# Compiler flag to turn off builtin functions. +no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_GCJ + +# Compiler flag to allow reflexive dlopens. +export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_GCJ + +# Compiler flag to generate shared objects directly from archives. +whole_archive_flag_spec=$lt_whole_archive_flag_spec_GCJ + +# Compiler flag to generate thread-safe objects. +thread_safe_flag_spec=$lt_thread_safe_flag_spec_GCJ + +# Library versioning type. +version_type=$version_type + +# Format of library name prefix. +libname_spec=$lt_libname_spec + +# List of archive names. First name is the real one, the rest are links. +# The last name is the one that the linker finds with -lNAME. +library_names_spec=$lt_library_names_spec + +# The coded name of the library, if different from the real name. +soname_spec=$lt_soname_spec + +# Commands used to build and install an old-style archive. +RANLIB=$lt_RANLIB +old_archive_cmds=$lt_old_archive_cmds_GCJ +old_postinstall_cmds=$lt_old_postinstall_cmds +old_postuninstall_cmds=$lt_old_postuninstall_cmds + +# Create an old-style archive from a shared archive. +old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_GCJ + +# Create a temporary old-style archive to link instead of a shared archive. +old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_GCJ + +# Commands used to build and install a shared archive. +archive_cmds=$lt_archive_cmds_GCJ +archive_expsym_cmds=$lt_archive_expsym_cmds_GCJ +postinstall_cmds=$lt_postinstall_cmds +postuninstall_cmds=$lt_postuninstall_cmds + +# Commands used to build a loadable module (assumed same as above if empty) +module_cmds=$lt_module_cmds_GCJ +module_expsym_cmds=$lt_module_expsym_cmds_GCJ + +# Commands to strip libraries. +old_striplib=$lt_old_striplib +striplib=$lt_striplib + +# Dependencies to place before the objects being linked to create a +# shared library. +predep_objects=$lt_predep_objects_GCJ + +# Dependencies to place after the objects being linked to create a +# shared library. +postdep_objects=$lt_postdep_objects_GCJ + +# Dependencies to place before the objects being linked to create a +# shared library. +predeps=$lt_predeps_GCJ + +# Dependencies to place after the objects being linked to create a +# shared library. +postdeps=$lt_postdeps_GCJ + +# The library search path used internally by the compiler when linking +# a shared library. +compiler_lib_search_path=$lt_compiler_lib_search_path_GCJ + +# Method to check whether dependent libraries are shared objects. +deplibs_check_method=$lt_deplibs_check_method + +# Command to use when deplibs_check_method == file_magic. +file_magic_cmd=$lt_file_magic_cmd - case $lt_cv_dlopen in - dlopen) - save_CPPFLAGS="$CPPFLAGS" - test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" +# Flag that allows shared libraries with undefined symbols to be built. +allow_undefined_flag=$lt_allow_undefined_flag_GCJ - save_LDFLAGS="$LDFLAGS" - eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" +# Flag that forces no undefined symbols. +no_undefined_flag=$lt_no_undefined_flag_GCJ - save_LIBS="$LIBS" - LIBS="$lt_cv_dlopen_libs $LIBS" +# Commands used to finish a libtool library installation in a directory. +finish_cmds=$lt_finish_cmds - echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5 -echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6 -if test "${lt_cv_dlopen_self+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test "$cross_compiling" = yes; then : - lt_cv_dlopen_self=cross -else - lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 - lt_status=$lt_dlunknown - cat > conftest.$ac_ext < -#endif +# Take the output of nm and produce a listing of raw symbols and C names. +global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe -#include +# Transform the output of nm in a proper C declaration +global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl -#ifdef RTLD_GLOBAL -# define LT_DLGLOBAL RTLD_GLOBAL -#else -# ifdef DL_GLOBAL -# define LT_DLGLOBAL DL_GLOBAL -# else -# define LT_DLGLOBAL 0 -# endif -#endif +# Transform the output of nm in a C name address pair +global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address -/* We may have to define LT_DLLAZY_OR_NOW in the command line if we - find out it does not work in some platform. */ -#ifndef LT_DLLAZY_OR_NOW -# ifdef RTLD_LAZY -# define LT_DLLAZY_OR_NOW RTLD_LAZY -# else -# ifdef DL_LAZY -# define LT_DLLAZY_OR_NOW DL_LAZY -# else -# ifdef RTLD_NOW -# define LT_DLLAZY_OR_NOW RTLD_NOW -# else -# ifdef DL_NOW -# define LT_DLLAZY_OR_NOW DL_NOW -# else -# define LT_DLLAZY_OR_NOW 0 -# endif -# endif -# endif -# endif -#endif +# This is the shared library runtime path variable. +runpath_var=$runpath_var -#ifdef __cplusplus -extern "C" void exit (int); -#endif +# This is the shared library path variable. +shlibpath_var=$shlibpath_var -void fnord() { int i=42;} -int main () -{ - void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); - int status = $lt_dlunknown; +# Is shlibpath searched before the hard-coded library search path? +shlibpath_overrides_runpath=$shlibpath_overrides_runpath - if (self) - { - if (dlsym (self,"fnord")) status = $lt_dlno_uscore; - else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; - /* dlclose (self); */ - } +# How to hardcode a shared library path into an executable. +hardcode_action=$hardcode_action_GCJ - exit (status); -} -EOF - if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then - (./conftest; exit; ) 2>/dev/null - lt_status=$? - case x$lt_status in - x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;; - x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;; - x$lt_unknown|x*) lt_cv_dlopen_self=no ;; - esac - else : - # compilation failed - lt_cv_dlopen_self=no - fi -fi -rm -fr conftest* +# Whether we should hardcode library paths into libraries. +hardcode_into_libs=$hardcode_into_libs +# Flag to hardcode \$libdir into a binary during linking. +# This must work even if \$libdir does not exist. +hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_GCJ -fi -echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5 -echo "${ECHO_T}$lt_cv_dlopen_self" >&6 +# If ld is used when linking, flag to hardcode \$libdir into +# a binary during linking. This must work even if \$libdir does +# not exist. +hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_GCJ - if test "x$lt_cv_dlopen_self" = xyes; then - LDFLAGS="$LDFLAGS $link_static_flag" - echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5 -echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6 -if test "${lt_cv_dlopen_self_static+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test "$cross_compiling" = yes; then : - lt_cv_dlopen_self_static=cross -else - lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 - lt_status=$lt_dlunknown - cat > conftest.$ac_ext < -#endif +# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the +# resulting binary. +hardcode_direct=$hardcode_direct_GCJ -#include +# Set to yes if using the -LDIR flag during linking hardcodes DIR into the +# resulting binary. +hardcode_minus_L=$hardcode_minus_L_GCJ -#ifdef RTLD_GLOBAL -# define LT_DLGLOBAL RTLD_GLOBAL -#else -# ifdef DL_GLOBAL -# define LT_DLGLOBAL DL_GLOBAL -# else -# define LT_DLGLOBAL 0 -# endif -#endif +# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into +# the resulting binary. +hardcode_shlibpath_var=$hardcode_shlibpath_var_GCJ -/* We may have to define LT_DLLAZY_OR_NOW in the command line if we - find out it does not work in some platform. */ -#ifndef LT_DLLAZY_OR_NOW -# ifdef RTLD_LAZY -# define LT_DLLAZY_OR_NOW RTLD_LAZY -# else -# ifdef DL_LAZY -# define LT_DLLAZY_OR_NOW DL_LAZY -# else -# ifdef RTLD_NOW -# define LT_DLLAZY_OR_NOW RTLD_NOW -# else -# ifdef DL_NOW -# define LT_DLLAZY_OR_NOW DL_NOW -# else -# define LT_DLLAZY_OR_NOW 0 -# endif -# endif -# endif -# endif -#endif +# Set to yes if building a shared library automatically hardcodes DIR into the library +# and all subsequent libraries and executables linked against it. +hardcode_automatic=$hardcode_automatic_GCJ -#ifdef __cplusplus -extern "C" void exit (int); -#endif +# Variables whose values should be saved in libtool wrapper scripts and +# restored at relink time. +variables_saved_for_relink="$variables_saved_for_relink" -void fnord() { int i=42;} -int main () -{ - void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); - int status = $lt_dlunknown; +# Whether libtool must link a program against all its dependency libraries. +link_all_deplibs=$link_all_deplibs_GCJ - if (self) - { - if (dlsym (self,"fnord")) status = $lt_dlno_uscore; - else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; - /* dlclose (self); */ - } +# Compile-time system search path for libraries +sys_lib_search_path_spec=$lt_sys_lib_search_path_spec - exit (status); -} -EOF - if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then - (./conftest; exit; ) 2>/dev/null - lt_status=$? - case x$lt_status in - x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;; - x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;; - x$lt_unknown|x*) lt_cv_dlopen_self_static=no ;; - esac - else : - # compilation failed - lt_cv_dlopen_self_static=no - fi -fi -rm -fr conftest* +# Run-time system search path for libraries +sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec +# Fix the shell variable \$srcfile for the compiler. +fix_srcfile_path="$fix_srcfile_path_GCJ" -fi -echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5 -echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6 - fi +# Set to yes if exported symbols are required. +always_export_symbols=$always_export_symbols_GCJ - CPPFLAGS="$save_CPPFLAGS" - LDFLAGS="$save_LDFLAGS" - LIBS="$save_LIBS" - ;; - esac +# The commands to list exported symbols. +export_symbols_cmds=$lt_export_symbols_cmds_GCJ - case $lt_cv_dlopen_self in - yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; - *) enable_dlopen_self=unknown ;; - esac +# The commands to extract the exported symbol list from a shared archive. +extract_expsyms_cmds=$lt_extract_expsyms_cmds - case $lt_cv_dlopen_self_static in - yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; - *) enable_dlopen_self_static=unknown ;; - esac -fi +# Symbols that should not be listed in the preloaded symbols. +exclude_expsyms=$lt_exclude_expsyms_GCJ +# Symbols that must always be exported. +include_expsyms=$lt_include_expsyms_GCJ -if test "$enable_shared" = yes && test "$GCC" = yes; then - case $archive_cmds in - *'~'*) - # FIXME: we may have to deal with multi-command sequences. - ;; - '$CC '*) - # Test whether the compiler implicitly links with -lc since on some - # systems, -lgcc has to come before -lc. If gcc already passes -lc - # to ld, don't add -lc before -lgcc. - echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 -echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6 - if test "${lt_cv_archive_cmds_need_lc+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - $rm conftest* - echo 'static int dummy;' > conftest.$ac_ext +# ### END LIBTOOL TAG CONFIG: $tagname - if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - soname=conftest - lib=conftest - libobjs=conftest.$ac_objext - deplibs= - wl=$lt_cv_prog_cc_wl - compiler_flags=-v - linker_flags=-v - verstring= - output_objdir=. - libname=conftest - save_allow_undefined_flag=$allow_undefined_flag - allow_undefined_flag= - if { (eval echo "$as_me:$LINENO: \"$archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5 - (eval $archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } - then - lt_cv_archive_cmds_need_lc=no - else - lt_cv_archive_cmds_need_lc=yes - fi - allow_undefined_flag=$save_allow_undefined_flag - else - cat conftest.err 1>&5 - fi -fi +__EOF__ - echo "$as_me:$LINENO: result: $lt_cv_archive_cmds_need_lc" >&5 -echo "${ECHO_T}$lt_cv_archive_cmds_need_lc" >&6 - ;; - esac -fi -need_lc=${lt_cv_archive_cmds_need_lc-yes} -# The second clause should only fire when bootstrapping the -# libtool distribution, otherwise you forgot to ship ltmain.sh -# with your package, and you will get complaints that there are -# no rules to generate ltmain.sh. -if test -f "$ltmain"; then - : else # If there is no Makefile yet, we rely on a make rule to execute # `config.status --recheck' to rerun these tests and create the # libtool script then. - test -f Makefile && make "$ltmain" + ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` + if test -f "$ltmain_in"; then + test -f Makefile && make "$ltmain" + fi fi -if test -f "$ltmain"; then - trap "$rm \"${ofile}T\"; exit 1" 1 2 15 - $rm -f "${ofile}T" - echo creating $ofile +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + +CC="$lt_save_CC" + + else + tagname="" + fi + ;; + + RC) + + + +# Source file extension for RC test sources. +ac_ext=rc + +# Object file extension for compiled RC test sources. +objext=o +objext_RC=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }\n' + +# Code to be used in simple link tests +lt_simple_link_test_code="$lt_simple_compile_test_code" + +# ltmain only uses $CC for tagged configurations so make sure $CC is set. + +# If no C compiler was specified, use CC. +LTCC=${LTCC-"$CC"} + +# Allow CC to be a program name with arguments. +compiler=$CC + + +# Allow CC to be a program name with arguments. +lt_save_CC="$CC" +CC=${RC-"windres"} +compiler=$CC +compiler_RC=$CC +lt_cv_prog_compiler_c_o_RC=yes +# The else clause should only fire when bootstrapping the +# libtool distribution, otherwise you forgot to ship ltmain.sh +# with your package, and you will get complaints that there are +# no rules to generate ltmain.sh. +if test -f "$ltmain"; then + # See if we are running on zsh, and set the options which allow our commands through + # without removal of \ escapes. + if test -n "${ZSH_VERSION+set}" ; then + setopt NO_GLOB_SUBST + fi # Now quote all the things that may contain metacharacters while being # careful not to overquote the AC_SUBSTed values. We take copies of the # variables and quote the copies for generation of the libtool script. - for var in echo old_CC old_CFLAGS \ - AR AR_FLAGS CC LD LN_S NM SHELL \ - reload_flag reload_cmds wl \ - pic_flag link_static_flag no_builtin_flag export_dynamic_flag_spec \ - thread_safe_flag_spec whole_archive_flag_spec libname_spec \ - library_names_spec soname_spec \ - RANLIB old_archive_cmds old_archive_from_new_cmds old_postinstall_cmds \ - old_postuninstall_cmds archive_cmds archive_expsym_cmds postinstall_cmds \ - postuninstall_cmds extract_expsyms_cmds old_archive_from_expsyms_cmds \ - old_striplib striplib file_magic_cmd export_symbols_cmds \ - deplibs_check_method allow_undefined_flag no_undefined_flag \ - finish_cmds finish_eval global_symbol_pipe global_symbol_to_cdecl \ - global_symbol_to_c_name_address \ - hardcode_libdir_flag_spec hardcode_libdir_separator \ + for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC NM \ + SED SHELL STRIP \ + libname_spec library_names_spec soname_spec extract_expsyms_cmds \ + old_striplib striplib file_magic_cmd finish_cmds finish_eval \ + deplibs_check_method reload_flag reload_cmds need_locks \ + lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \ + lt_cv_sys_global_symbol_to_c_name_address \ sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ - compiler_c_o compiler_o_lo need_locks exclude_expsyms include_expsyms; do + old_postinstall_cmds old_postuninstall_cmds \ + compiler_RC \ + CC_RC \ + LD_RC \ + lt_prog_compiler_wl_RC \ + lt_prog_compiler_pic_RC \ + lt_prog_compiler_static_RC \ + lt_prog_compiler_no_builtin_flag_RC \ + export_dynamic_flag_spec_RC \ + thread_safe_flag_spec_RC \ + whole_archive_flag_spec_RC \ + enable_shared_with_static_runtimes_RC \ + old_archive_cmds_RC \ + old_archive_from_new_cmds_RC \ + predep_objects_RC \ + postdep_objects_RC \ + predeps_RC \ + postdeps_RC \ + compiler_lib_search_path_RC \ + archive_cmds_RC \ + archive_expsym_cmds_RC \ + postinstall_cmds_RC \ + postuninstall_cmds_RC \ + old_archive_from_expsyms_cmds_RC \ + allow_undefined_flag_RC \ + no_undefined_flag_RC \ + export_symbols_cmds_RC \ + hardcode_libdir_flag_spec_RC \ + hardcode_libdir_flag_spec_ld_RC \ + hardcode_libdir_separator_RC \ + hardcode_automatic_RC \ + module_cmds_RC \ + module_expsym_cmds_RC \ + lt_cv_prog_compiler_c_o_RC \ + exclude_expsyms_RC \ + include_expsyms_RC; do case $var in - reload_cmds | old_archive_cmds | old_archive_from_new_cmds | \ - old_postinstall_cmds | old_postuninstall_cmds | \ - export_symbols_cmds | archive_cmds | archive_expsym_cmds | \ - extract_expsyms_cmds | old_archive_from_expsyms_cmds | \ + old_archive_cmds_RC | \ + old_archive_from_new_cmds_RC | \ + archive_cmds_RC | \ + archive_expsym_cmds_RC | \ + module_cmds_RC | \ + module_expsym_cmds_RC | \ + old_archive_from_expsyms_cmds_RC | \ + export_symbols_cmds_RC | \ + extract_expsyms_cmds | reload_cmds | finish_cmds | \ postinstall_cmds | postuninstall_cmds | \ - finish_cmds | sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) + old_postinstall_cmds | old_postuninstall_cmds | \ + sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) # Double-quote double-evaled strings. eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" ;; @@ -7319,43 +18293,16 @@ esac done - cat <<__EOF__ > "${ofile}T" -#! $SHELL - -# `$echo "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. -# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP) -# NOTE: Changes made to this file will be lost: look at ltmain.sh. -# -# Copyright (C) 1996-2000 Free Software Foundation, Inc. -# Originally by Gordon Matzigkeit , 1996 -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -# -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -# Sed that helps us avoid accidentally triggering echo(1) options like -n. -Xsed="sed -e s/^X//" + case $lt_echo in + *'\$0 --fallback-echo"') + lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'` + ;; + esac -# The HP-UX ksh and POSIX shell print the target directory to stdout -# if CDPATH is set. -if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi +cfgfile="$ofile" -# ### BEGIN LIBTOOL CONFIG + cat <<__EOF__ >> "$cfgfile" +# ### BEGIN LIBTOOL TAG CONFIG: $tagname # Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: @@ -7369,7 +18316,10 @@ build_old_libs=$enable_static # Whether or not to add -lc for building shared libraries. -build_libtool_need_lc=$need_lc +build_libtool_need_lc=$archive_cmds_need_lc_RC + +# Whether or not to disallow shared libs when runtime libs are static +allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_RC # Whether or not to optimize for fast installation. fast_install=$enable_fast_install @@ -7385,14 +18335,20 @@ AR=$lt_AR AR_FLAGS=$lt_AR_FLAGS -# The default C compiler. -CC=$lt_CC +# A C compiler. +LTCC=$lt_LTCC + +# A language-specific compiler. +CC=$lt_compiler_RC # Is the compiler the GNU C compiler? -with_gcc=$GCC +with_gcc=$GCC_RC + +# An ERE matcher. +EGREP=$lt_EGREP # The linker used to build libraries. -LD=$lt_LD +LD=$lt_LD_RC # Whether we need hard or soft links. LN_S=$lt_LN_S @@ -7401,7 +18357,7 @@ NM=$lt_NM # A symbol stripping program -STRIP=$STRIP +STRIP=$lt_STRIP # Used to examine libraries when file_magic_cmd begins "file" MAGIC_CMD=$MAGIC_CMD @@ -7423,7 +18379,7 @@ reload_cmds=$lt_reload_cmds # How to pass a linker flag through the compiler. -wl=$lt_wl +wl=$lt_lt_prog_compiler_wl_RC # Object file suffix (normally "o"). objext="$ac_objext" @@ -7431,18 +18387,21 @@ # Old archive suffix (normally "a"). libext="$libext" +# Shared library suffix (normally ".so"). +shrext_cmds='$shrext_cmds' + # Executable file suffix (normally ""). exeext="$exeext" # Additional compiler flags for building library objects. -pic_flag=$lt_pic_flag +pic_flag=$lt_lt_prog_compiler_pic_RC pic_mode=$pic_mode -# Does compiler simultaneously support -c and -o options? -compiler_c_o=$lt_compiler_c_o +# What is the maximum length of a command? +max_cmd_len=$lt_cv_sys_max_cmd_len -# Can we write directly to a .lo ? -compiler_o_lo=$lt_compiler_o_lo +# Does compiler simultaneously support -c and -o options? +compiler_c_o=$lt_lt_cv_prog_compiler_c_o_RC # Must we lock files when doing compilation ? need_locks=$lt_need_locks @@ -7463,19 +18422,19 @@ dlopen_self_static=$enable_dlopen_self_static # Compiler flag to prevent dynamic linking. -link_static_flag=$lt_link_static_flag +link_static_flag=$lt_lt_prog_compiler_static_RC # Compiler flag to turn off builtin functions. -no_builtin_flag=$lt_no_builtin_flag +no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_RC # Compiler flag to allow reflexive dlopens. -export_dynamic_flag_spec=$lt_export_dynamic_flag_spec +export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_RC # Compiler flag to generate shared objects directly from archives. -whole_archive_flag_spec=$lt_whole_archive_flag_spec +whole_archive_flag_spec=$lt_whole_archive_flag_spec_RC # Compiler flag to generate thread-safe objects. -thread_safe_flag_spec=$lt_thread_safe_flag_spec +thread_safe_flag_spec=$lt_thread_safe_flag_spec_RC # Library versioning type. version_type=$version_type @@ -7492,26 +18451,50 @@ # Commands used to build and install an old-style archive. RANLIB=$lt_RANLIB -old_archive_cmds=$lt_old_archive_cmds +old_archive_cmds=$lt_old_archive_cmds_RC old_postinstall_cmds=$lt_old_postinstall_cmds old_postuninstall_cmds=$lt_old_postuninstall_cmds # Create an old-style archive from a shared archive. -old_archive_from_new_cmds=$lt_old_archive_from_new_cmds +old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_RC # Create a temporary old-style archive to link instead of a shared archive. -old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds +old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_RC # Commands used to build and install a shared archive. -archive_cmds=$lt_archive_cmds -archive_expsym_cmds=$lt_archive_expsym_cmds +archive_cmds=$lt_archive_cmds_RC +archive_expsym_cmds=$lt_archive_expsym_cmds_RC postinstall_cmds=$lt_postinstall_cmds postuninstall_cmds=$lt_postuninstall_cmds +# Commands used to build a loadable module (assumed same as above if empty) +module_cmds=$lt_module_cmds_RC +module_expsym_cmds=$lt_module_expsym_cmds_RC + # Commands to strip libraries. old_striplib=$lt_old_striplib striplib=$lt_striplib +# Dependencies to place before the objects being linked to create a +# shared library. +predep_objects=$lt_predep_objects_RC + +# Dependencies to place after the objects being linked to create a +# shared library. +postdep_objects=$lt_postdep_objects_RC + +# Dependencies to place before the objects being linked to create a +# shared library. +predeps=$lt_predeps_RC + +# Dependencies to place after the objects being linked to create a +# shared library. +postdeps=$lt_postdeps_RC + +# The library search path used internally by the compiler when linking +# a shared library. +compiler_lib_search_path=$lt_compiler_lib_search_path_RC + # Method to check whether dependent libraries are shared objects. deplibs_check_method=$lt_deplibs_check_method @@ -7519,10 +18502,10 @@ file_magic_cmd=$lt_file_magic_cmd # Flag that allows shared libraries with undefined symbols to be built. -allow_undefined_flag=$lt_allow_undefined_flag +allow_undefined_flag=$lt_allow_undefined_flag_RC # Flag that forces no undefined symbols. -no_undefined_flag=$lt_no_undefined_flag +no_undefined_flag=$lt_no_undefined_flag_RC # Commands used to finish a libtool library installation in a directory. finish_cmds=$lt_finish_cmds @@ -7531,13 +18514,13 @@ finish_eval=$lt_finish_eval # Take the output of nm and produce a listing of raw symbols and C names. -global_symbol_pipe=$lt_global_symbol_pipe +global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe # Transform the output of nm in a proper C declaration -global_symbol_to_cdecl=$lt_global_symbol_to_cdecl +global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl # Transform the output of nm in a C name address pair -global_symbol_to_c_name_address=$lt_global_symbol_to_c_name_address +global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address # This is the shared library runtime path variable. runpath_var=$runpath_var @@ -7549,36 +18532,45 @@ shlibpath_overrides_runpath=$shlibpath_overrides_runpath # How to hardcode a shared library path into an executable. -hardcode_action=$hardcode_action +hardcode_action=$hardcode_action_RC # Whether we should hardcode library paths into libraries. hardcode_into_libs=$hardcode_into_libs # Flag to hardcode \$libdir into a binary during linking. # This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec +hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_RC + +# If ld is used when linking, flag to hardcode \$libdir into +# a binary during linking. This must work even if \$libdir does +# not exist. +hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_RC # Whether we need a single -rpath flag with a separated argument. -hardcode_libdir_separator=$lt_hardcode_libdir_separator +hardcode_libdir_separator=$lt_hardcode_libdir_separator_RC -# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the +# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the # resulting binary. -hardcode_direct=$hardcode_direct +hardcode_direct=$hardcode_direct_RC # Set to yes if using the -LDIR flag during linking hardcodes DIR into the # resulting binary. -hardcode_minus_L=$hardcode_minus_L +hardcode_minus_L=$hardcode_minus_L_RC # Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into # the resulting binary. -hardcode_shlibpath_var=$hardcode_shlibpath_var +hardcode_shlibpath_var=$hardcode_shlibpath_var_RC + +# Set to yes if building a shared library automatically hardcodes DIR into the library +# and all subsequent libraries and executables linked against it. +hardcode_automatic=$hardcode_automatic_RC # Variables whose values should be saved in libtool wrapper scripts and # restored at relink time. variables_saved_for_relink="$variables_saved_for_relink" # Whether libtool must link a program against all its dependency libraries. -link_all_deplibs=$link_all_deplibs +link_all_deplibs=$link_all_deplibs_RC # Compile-time system search path for libraries sys_lib_search_path_spec=$lt_sys_lib_search_path_spec @@ -7587,234 +18579,75 @@ sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec # Fix the shell variable \$srcfile for the compiler. -fix_srcfile_path="$fix_srcfile_path" +fix_srcfile_path="$fix_srcfile_path_RC" # Set to yes if exported symbols are required. -always_export_symbols=$always_export_symbols +always_export_symbols=$always_export_symbols_RC # The commands to list exported symbols. -export_symbols_cmds=$lt_export_symbols_cmds +export_symbols_cmds=$lt_export_symbols_cmds_RC # The commands to extract the exported symbol list from a shared archive. extract_expsyms_cmds=$lt_extract_expsyms_cmds # Symbols that should not be listed in the preloaded symbols. -exclude_expsyms=$lt_exclude_expsyms +exclude_expsyms=$lt_exclude_expsyms_RC # Symbols that must always be exported. -include_expsyms=$lt_include_expsyms +include_expsyms=$lt_include_expsyms_RC -# ### END LIBTOOL CONFIG +# ### END LIBTOOL TAG CONFIG: $tagname __EOF__ - case $host_os in - aix3*) - cat <<\EOF >> "${ofile}T" -# AIX sometimes has problems with the GCC collect2 program. For some -# reason, if we set the COLLECT_NAMES environment variable, the problems -# vanish in a puff of smoke. -if test "X${COLLECT_NAMES+set}" != Xset; then - COLLECT_NAMES= - export COLLECT_NAMES +else + # If there is no Makefile yet, we rely on a make rule to execute + # `config.status --recheck' to rerun these tests and create the + # libtool script then. + ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` + if test -f "$ltmain_in"; then + test -f Makefile && make "$ltmain" + fi fi -EOF - ;; - esac - case $host_os in - cygwin* | mingw* | pw32* | os2*) - cat <<'EOF' >> "${ofile}T" - # This is a source program that is used to create dlls on Windows - # Don't remove nor modify the starting and closing comments -# /* ltdll.c starts here */ -# #define WIN32_LEAN_AND_MEAN -# #include -# #undef WIN32_LEAN_AND_MEAN -# #include -# -# #ifndef __CYGWIN__ -# # ifdef __CYGWIN32__ -# # define __CYGWIN__ __CYGWIN32__ -# # endif -# #endif -# -# #ifdef __cplusplus -# extern "C" { -# #endif -# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved); -# #ifdef __cplusplus -# } -# #endif -# -# #ifdef __CYGWIN__ -# #include -# DECLARE_CYGWIN_DLL( DllMain ); -# #endif -# HINSTANCE __hDllInstance_base; -# -# BOOL APIENTRY -# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved) -# { -# __hDllInstance_base = hInst; -# return TRUE; -# } -# /* ltdll.c ends here */ - # This is a source program that is used to create import libraries - # on Windows for dlls which lack them. Don't remove nor modify the - # starting and closing comments -# /* impgen.c starts here */ -# /* Copyright (C) 1999-2000 Free Software Foundation, Inc. -# -# This file is part of GNU libtool. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -# */ -# -# #include /* for printf() */ -# #include /* for open(), lseek(), read() */ -# #include /* for O_RDONLY, O_BINARY */ -# #include /* for strdup() */ -# -# /* O_BINARY isn't required (or even defined sometimes) under Unix */ -# #ifndef O_BINARY -# #define O_BINARY 0 -# #endif -# -# static unsigned int -# pe_get16 (fd, offset) -# int fd; -# int offset; -# { -# unsigned char b[2]; -# lseek (fd, offset, SEEK_SET); -# read (fd, b, 2); -# return b[0] + (b[1]<<8); -# } -# -# static unsigned int -# pe_get32 (fd, offset) -# int fd; -# int offset; -# { -# unsigned char b[4]; -# lseek (fd, offset, SEEK_SET); -# read (fd, b, 4); -# return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24); -# } -# -# static unsigned int -# pe_as32 (ptr) -# void *ptr; -# { -# unsigned char *b = ptr; -# return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24); -# } -# -# int -# main (argc, argv) -# int argc; -# char *argv[]; -# { -# int dll; -# unsigned long pe_header_offset, opthdr_ofs, num_entries, i; -# unsigned long export_rva, export_size, nsections, secptr, expptr; -# unsigned long name_rvas, nexp; -# unsigned char *expdata, *erva; -# char *filename, *dll_name; -# -# filename = argv[1]; -# -# dll = open(filename, O_RDONLY|O_BINARY); -# if (dll < 1) -# return 1; -# -# dll_name = filename; -# -# for (i=0; filename[i]; i++) -# if (filename[i] == '/' || filename[i] == '\\' || filename[i] == ':') -# dll_name = filename + i +1; -# -# pe_header_offset = pe_get32 (dll, 0x3c); -# opthdr_ofs = pe_header_offset + 4 + 20; -# num_entries = pe_get32 (dll, opthdr_ofs + 92); -# -# if (num_entries < 1) /* no exports */ -# return 1; -# -# export_rva = pe_get32 (dll, opthdr_ofs + 96); -# export_size = pe_get32 (dll, opthdr_ofs + 100); -# nsections = pe_get16 (dll, pe_header_offset + 4 +2); -# secptr = (pe_header_offset + 4 + 20 + -# pe_get16 (dll, pe_header_offset + 4 + 16)); -# -# expptr = 0; -# for (i = 0; i < nsections; i++) -# { -# char sname[8]; -# unsigned long secptr1 = secptr + 40 * i; -# unsigned long vaddr = pe_get32 (dll, secptr1 + 12); -# unsigned long vsize = pe_get32 (dll, secptr1 + 16); -# unsigned long fptr = pe_get32 (dll, secptr1 + 20); -# lseek(dll, secptr1, SEEK_SET); -# read(dll, sname, 8); -# if (vaddr <= export_rva && vaddr+vsize > export_rva) -# { -# expptr = fptr + (export_rva - vaddr); -# if (export_rva + export_size > vaddr + vsize) -# export_size = vsize - (export_rva - vaddr); -# break; -# } -# } -# -# expdata = (unsigned char*)malloc(export_size); -# lseek (dll, expptr, SEEK_SET); -# read (dll, expdata, export_size); -# erva = expdata - export_rva; -# -# nexp = pe_as32 (expdata+24); -# name_rvas = pe_as32 (expdata+32); -# -# printf ("EXPORTS\n"); -# for (i = 0; i> "${ofile}T" || (rm -f "${ofile}T"; exit 1) +CC="$lt_save_CC" - mv -f "${ofile}T" "$ofile" || \ - (rm -f "$ofile" && cp "${ofile}T" "$ofile" && rm -f "${ofile}T") - chmod +x "$ofile" -fi + ;; + + *) + { { echo "$as_me:$LINENO: error: Unsupported tag name: $tagname" >&5 +echo "$as_me: error: Unsupported tag name: $tagname" >&2;} + { (exit 1); exit 1; }; } + ;; + esac + # Append the new tag name to the list of available tags. + if test -n "$tagname" ; then + available_tags="$available_tags $tagname" + fi + fi + done + IFS="$lt_save_ifs" + # Now substitute the updated list of available tags. + if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then + mv "${ofile}T" "$ofile" + chmod +x "$ofile" + else + rm -f "${ofile}T" + { { echo "$as_me:$LINENO: error: unable to update list of available tagged configurations." >&5 +echo "$as_me: error: unable to update list of available tagged configurations." >&2;} + { (exit 1); exit 1; }; } + fi +fi @@ -7829,6 +18662,24 @@ + + + + + + + + + + + + + + + + + + # Switch on all warnings: build must be silent ;-) test "$GCC" = yes && CCFLAGS="$CFLAGS -W -Wall -ansi -pedantic" test "$GCC" = yes && CXXFLAGS="$CXXFLAGS -W -Wall -ansi -pedantic" @@ -7851,17 +18702,14 @@ echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ #include #include <$ac_hdr> -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif int main () { @@ -7873,11 +18721,20 @@ _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 + (eval $ac_compile) 2>conftest.er1 ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -7886,10 +18743,11 @@ eval "$as_ac_Header=yes" else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + eval "$as_ac_Header=no" fi -rm -f conftest.$ac_objext conftest.$ac_ext +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext fi echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 @@ -7912,8 +18770,11 @@ ac_func_search_save_LIBS=$LIBS ac_cv_search_opendir=no cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus @@ -7922,12 +18783,6 @@ /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char opendir (); -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif int main () { @@ -7938,11 +18793,20 @@ _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 + (eval $ac_link) 2>conftest.er1 ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -s conftest$ac_exeext' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -7951,15 +18815,20 @@ ac_cv_search_opendir="none required" else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + fi -rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext if test "$ac_cv_search_opendir" = no; then for ac_lib in dir; do LIBS="-l$ac_lib $ac_func_search_save_LIBS" cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus @@ -7968,12 +18837,6 @@ /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char opendir (); -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif int main () { @@ -7984,11 +18847,20 @@ _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 + (eval $ac_link) 2>conftest.er1 ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -s conftest$ac_exeext' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -7998,9 +18870,11 @@ break else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + fi -rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext done fi LIBS=$ac_func_search_save_LIBS @@ -8021,8 +18895,11 @@ ac_func_search_save_LIBS=$LIBS ac_cv_search_opendir=no cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus @@ -8031,12 +18908,6 @@ /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char opendir (); -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif int main () { @@ -8047,11 +18918,20 @@ _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 + (eval $ac_link) 2>conftest.er1 ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -s conftest$ac_exeext' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -8060,15 +18940,20 @@ ac_cv_search_opendir="none required" else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + fi -rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext if test "$ac_cv_search_opendir" = no; then for ac_lib in x; do LIBS="-l$ac_lib $ac_func_search_save_LIBS" cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus @@ -8077,12 +18962,6 @@ /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char opendir (); -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif int main () { @@ -8093,11 +18972,20 @@ _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 + (eval $ac_link) 2>conftest.er1 ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -s conftest$ac_exeext' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -8107,9 +18995,11 @@ break else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + fi -rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext done fi LIBS=$ac_func_search_save_LIBS @@ -8129,49 +19019,67 @@ echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ #include #include #include #include +int +main () +{ + + ; + return 0; +} _ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 ac_status=$? - egrep -v '^ *\+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_c_preproc_warn_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then + (exit $ac_status); }; }; then ac_cv_header_stdc=yes else echo "$as_me: failed program was:" >&5 - cat conftest.$ac_ext >&5 - ac_cv_header_stdc=no +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_header_stdc=no fi -rm -f conftest.err conftest.$ac_ext +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - egrep "memchr" >/dev/null 2>&1; then + $EGREP "memchr" >/dev/null 2>&1; then : else ac_cv_header_stdc=no @@ -8183,13 +19091,16 @@ if test $ac_cv_header_stdc = yes; then # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - egrep "free" >/dev/null 2>&1; then + $EGREP "free" >/dev/null 2>&1; then : else ac_cv_header_stdc=no @@ -8204,16 +19115,20 @@ : else cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ #include #if ((' ' & 0x0FF) == 0x020) # define ISLOWER(c) ('a' <= (c) && (c) <= 'z') # define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) #else -# define ISLOWER(c) (('a' <= (c) && (c) <= 'i') \ - || ('j' <= (c) && (c) <= 'r') \ - || ('s' <= (c) && (c) <= 'z')) +# define ISLOWER(c) \ + (('a' <= (c) && (c) <= 'i') \ + || ('j' <= (c) && (c) <= 'r') \ + || ('s' <= (c) && (c) <= 'z')) # define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) #endif @@ -8224,7 +19139,7 @@ int i; for (i = 0; i < 256; i++) if (XOR (islower (i), ISLOWER (i)) - || toupper (i) != TOUPPER (i)) + || toupper (i) != TOUPPER (i)) exit(2); exit (0); } @@ -8244,11 +19159,12 @@ else echo "$as_me: program exited with status $ac_status" >&5 echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ( exit $ac_status ) ac_cv_header_stdc=no fi -rm -f core core.* *.core conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext fi fi fi @@ -8289,18 +19205,30 @@ echo "$as_me:$LINENO: checking $ac_header usability" >&5 echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ $ac_includes_default #include <$ac_header> _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 + (eval $ac_compile) 2>conftest.er1 ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -8309,10 +19237,11 @@ ac_header_compiler=yes else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ac_header_compiler=no fi -rm -f conftest.$ac_objext conftest.$ac_ext +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 echo "${ECHO_T}$ac_header_compiler" >&6 @@ -8320,20 +19249,24 @@ echo "$as_me:$LINENO: checking $ac_header presence" >&5 echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ #include <$ac_header> _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? - egrep -v '^ *\+' conftest.er1 >conftest.err + grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag else ac_cpp_err= fi @@ -8344,7 +19277,8 @@ ac_header_preproc=yes else echo "$as_me: failed program was:" >&5 - cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ac_header_preproc=no fi rm -f conftest.err conftest.$ac_ext @@ -8352,26 +19286,43 @@ echo "${ECHO_T}$ac_header_preproc" >&6 # So? What about this header? -case $ac_header_compiler:$ac_header_preproc in - yes:no ) +case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in + yes:no: ) { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};; - no:yes ) + { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 +echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} + ac_header_preproc=yes + ;; + no:yes:* ) { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 -echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 +echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 +echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 +echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};; +echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 +echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} + ( + cat <<\_ASBOX +## ------------------------------------------ ## +## Report this to the AC_PACKAGE_NAME lists. ## +## ------------------------------------------ ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; esac echo "$as_me:$LINENO: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 if eval "test \"\${$as_ac_Header+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 else - eval "$as_ac_Header=$ac_header_preproc" + eval "$as_ac_Header=\$ac_header_preproc" fi echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 @@ -8388,118 +19339,18 @@ # Checks for typdefs, structures, and compiler characteristics -echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5 -echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6 -if test "${ac_cv_prog_cc_stdc+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_cv_prog_cc_stdc=no -ac_save_CC=$CC -cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" -#include -#include -#include -#include -/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ -struct buf { int x; }; -FILE * (*rcsopen) (struct buf *, struct stat *, int); -static char *e (p, i) - char **p; - int i; -{ - return p[i]; -} -static char *f (char * (*g) (char **, int), char **p, ...) -{ - char *s; - va_list v; - va_start (v,p); - s = g (p, va_arg (v,int)); - va_end (v); - return s; -} -int test (int i, double x); -struct s1 {int (*f) (int a);}; -struct s2 {int (*f) (double a);}; -int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); -int argc; -char **argv; -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif -int -main () -{ -return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; - ; - return 0; -} -_ACEOF -# Don't try gcc -ansi; that turns off useful extensions and -# breaks some systems' header files. -# AIX -qlanglvl=ansi -# Ultrix and OSF/1 -std1 -# HP-UX 10.20 and later -Ae -# HP-UX older versions -Aa -D_HPUX_SOURCE -# SVR4 -Xc -D__EXTENSIONS__ -for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" -do - CC="$ac_save_CC $ac_arg" - rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_prog_cc_stdc=$ac_arg -break -else - echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 -fi -rm -f conftest.$ac_objext -done -rm -f conftest.$ac_ext conftest.$ac_objext -CC=$ac_save_CC - -fi - -case "x$ac_cv_prog_cc_stdc" in - x|xno) - echo "$as_me:$LINENO: result: none needed" >&5 -echo "${ECHO_T}none needed" >&6 ;; - *) - echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5 -echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6 - CC="$CC $ac_cv_prog_cc_stdc" ;; -esac - echo "$as_me:$LINENO: checking for an ANSI C-conforming const" >&5 echo $ECHO_N "checking for an ANSI C-conforming const... $ECHO_C" >&6 if test "${ac_cv_c_const+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif int main () { @@ -8556,11 +19407,20 @@ _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 + (eval $ac_compile) 2>conftest.er1 ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -8569,10 +19429,11 @@ ac_cv_c_const=yes else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ac_cv_c_const=no fi -rm -f conftest.$ac_objext conftest.$ac_ext +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext fi echo "$as_me:$LINENO: result: $ac_cv_c_const" >&5 echo "${ECHO_T}$ac_cv_c_const" >&6 @@ -8590,15 +19451,12 @@ echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ $ac_includes_default -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif int main () { @@ -8612,11 +19470,20 @@ _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 + (eval $ac_compile) 2>conftest.er1 ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -8625,10 +19492,11 @@ ac_cv_type_size_t=yes else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ac_cv_type_size_t=no fi -rm -f conftest.$ac_objext conftest.$ac_ext +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext fi echo "$as_me:$LINENO: result: $ac_cv_type_size_t" >&5 echo "${ECHO_T}$ac_cv_type_size_t" >&6 @@ -8654,49 +19522,72 @@ echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* Define $ac_func to an innocuous variant, in case declares $ac_func. + For example, HP-UX 11i declares gettimeofday. */ +#define $ac_func innocuous_$ac_func + /* System header to define __stub macros and hopefully few prototypes, - which can conflict with char $ac_func (); below. */ -#include + which can conflict with char $ac_func (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ + +#ifdef __STDC__ +# include +#else +# include +#endif + +#undef $ac_func + /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus extern "C" +{ #endif /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char $ac_func (); -char (*f) (); - -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif -int -main () -{ /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_$ac_func) || defined (__stub___$ac_func) choke me #else -f = $ac_func; +char (*f) () = $ac_func; +#endif +#ifdef __cplusplus +} #endif +int +main () +{ +return f != $ac_func; ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 + (eval $ac_link) 2>conftest.er1 ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -s conftest$ac_exeext' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -8705,10 +19596,12 @@ eval "$as_ac_var=yes" else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + eval "$as_ac_var=no" fi -rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext fi echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5 echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6 @@ -8777,7 +19670,6 @@ INSTALL_TSE3_DOC_FALSE= fi - # ---------------------------------------------------------------------------- # Checks for multithread support (Mutex class) @@ -8824,18 +19716,30 @@ echo "$as_me:$LINENO: checking sys/soundcard.h usability" >&5 echo $ECHO_N "checking sys/soundcard.h usability... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ $ac_includes_default #include _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 + (eval $ac_compile) 2>conftest.er1 ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -8844,10 +19748,11 @@ ac_header_compiler=yes else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ac_header_compiler=no fi -rm -f conftest.$ac_objext conftest.$ac_ext +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 echo "${ECHO_T}$ac_header_compiler" >&6 @@ -8855,20 +19760,24 @@ echo "$as_me:$LINENO: checking sys/soundcard.h presence" >&5 echo $ECHO_N "checking sys/soundcard.h presence... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ #include _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? - egrep -v '^ *\+' conftest.er1 >conftest.err + grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag else ac_cpp_err= fi @@ -8879,7 +19788,8 @@ ac_header_preproc=yes else echo "$as_me: failed program was:" >&5 - cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ac_header_preproc=no fi rm -f conftest.err conftest.$ac_ext @@ -8887,19 +19797,36 @@ echo "${ECHO_T}$ac_header_preproc" >&6 # So? What about this header? -case $ac_header_compiler:$ac_header_preproc in - yes:no ) +case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in + yes:no: ) { echo "$as_me:$LINENO: WARNING: sys/soundcard.h: accepted by the compiler, rejected by the preprocessor!" >&5 echo "$as_me: WARNING: sys/soundcard.h: accepted by the compiler, rejected by the preprocessor!" >&2;} - { echo "$as_me:$LINENO: WARNING: sys/soundcard.h: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: sys/soundcard.h: proceeding with the preprocessor's result" >&2;};; - no:yes ) + { echo "$as_me:$LINENO: WARNING: sys/soundcard.h: proceeding with the compiler's result" >&5 +echo "$as_me: WARNING: sys/soundcard.h: proceeding with the compiler's result" >&2;} + ac_header_preproc=yes + ;; + no:yes:* ) { echo "$as_me:$LINENO: WARNING: sys/soundcard.h: present but cannot be compiled" >&5 echo "$as_me: WARNING: sys/soundcard.h: present but cannot be compiled" >&2;} - { echo "$as_me:$LINENO: WARNING: sys/soundcard.h: check for missing prerequisite headers?" >&5 -echo "$as_me: WARNING: sys/soundcard.h: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: sys/soundcard.h: check for missing prerequisite headers?" >&5 +echo "$as_me: WARNING: sys/soundcard.h: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: sys/soundcard.h: see the Autoconf documentation" >&5 +echo "$as_me: WARNING: sys/soundcard.h: see the Autoconf documentation" >&2;} + { echo "$as_me:$LINENO: WARNING: sys/soundcard.h: section \"Present But Cannot Be Compiled\"" >&5 +echo "$as_me: WARNING: sys/soundcard.h: section \"Present But Cannot Be Compiled\"" >&2;} { echo "$as_me:$LINENO: WARNING: sys/soundcard.h: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: sys/soundcard.h: proceeding with the preprocessor's result" >&2;};; +echo "$as_me: WARNING: sys/soundcard.h: proceeding with the preprocessor's result" >&2;} + { echo "$as_me:$LINENO: WARNING: sys/soundcard.h: in the future, the compiler will take precedence" >&5 +echo "$as_me: WARNING: sys/soundcard.h: in the future, the compiler will take precedence" >&2;} + ( + cat <<\_ASBOX +## ------------------------------------------ ## +## Report this to the AC_PACKAGE_NAME lists. ## +## ------------------------------------------ ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; esac echo "$as_me:$LINENO: checking for sys/soundcard.h" >&5 echo $ECHO_N "checking for sys/soundcard.h... $ECHO_C" >&6 @@ -8938,7 +19865,6 @@ HAVE_OSS_FALSE= fi - echo "$as_me:$LINENO: checking whether OSS is available" >&5 echo $ECHO_N "checking whether OSS is available... $ECHO_C" >&6 if test "$have_oss" = "yes"; then @@ -8988,7 +19914,6 @@ TSE3_WITH_OSS_FALSE= fi - # ---------------------------------------------------------------------------- # Checks for ALSA library support @@ -9010,18 +19935,30 @@ echo "$as_me:$LINENO: checking sys/asoundlib.h usability" >&5 echo $ECHO_N "checking sys/asoundlib.h usability... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ $ac_includes_default #include _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 + (eval $ac_compile) 2>conftest.er1 ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -9030,10 +19967,11 @@ ac_header_compiler=yes else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ac_header_compiler=no fi -rm -f conftest.$ac_objext conftest.$ac_ext +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 echo "${ECHO_T}$ac_header_compiler" >&6 @@ -9041,20 +19979,24 @@ echo "$as_me:$LINENO: checking sys/asoundlib.h presence" >&5 echo $ECHO_N "checking sys/asoundlib.h presence... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ #include _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? - egrep -v '^ *\+' conftest.er1 >conftest.err + grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag else ac_cpp_err= fi @@ -9065,7 +20007,8 @@ ac_header_preproc=yes else echo "$as_me: failed program was:" >&5 - cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ac_header_preproc=no fi rm -f conftest.err conftest.$ac_ext @@ -9073,19 +20016,36 @@ echo "${ECHO_T}$ac_header_preproc" >&6 # So? What about this header? -case $ac_header_compiler:$ac_header_preproc in - yes:no ) +case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in + yes:no: ) { echo "$as_me:$LINENO: WARNING: sys/asoundlib.h: accepted by the compiler, rejected by the preprocessor!" >&5 echo "$as_me: WARNING: sys/asoundlib.h: accepted by the compiler, rejected by the preprocessor!" >&2;} - { echo "$as_me:$LINENO: WARNING: sys/asoundlib.h: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: sys/asoundlib.h: proceeding with the preprocessor's result" >&2;};; - no:yes ) + { echo "$as_me:$LINENO: WARNING: sys/asoundlib.h: proceeding with the compiler's result" >&5 +echo "$as_me: WARNING: sys/asoundlib.h: proceeding with the compiler's result" >&2;} + ac_header_preproc=yes + ;; + no:yes:* ) { echo "$as_me:$LINENO: WARNING: sys/asoundlib.h: present but cannot be compiled" >&5 echo "$as_me: WARNING: sys/asoundlib.h: present but cannot be compiled" >&2;} - { echo "$as_me:$LINENO: WARNING: sys/asoundlib.h: check for missing prerequisite headers?" >&5 -echo "$as_me: WARNING: sys/asoundlib.h: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: sys/asoundlib.h: check for missing prerequisite headers?" >&5 +echo "$as_me: WARNING: sys/asoundlib.h: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: sys/asoundlib.h: see the Autoconf documentation" >&5 +echo "$as_me: WARNING: sys/asoundlib.h: see the Autoconf documentation" >&2;} + { echo "$as_me:$LINENO: WARNING: sys/asoundlib.h: section \"Present But Cannot Be Compiled\"" >&5 +echo "$as_me: WARNING: sys/asoundlib.h: section \"Present But Cannot Be Compiled\"" >&2;} { echo "$as_me:$LINENO: WARNING: sys/asoundlib.h: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: sys/asoundlib.h: proceeding with the preprocessor's result" >&2;};; +echo "$as_me: WARNING: sys/asoundlib.h: proceeding with the preprocessor's result" >&2;} + { echo "$as_me:$LINENO: WARNING: sys/asoundlib.h: in the future, the compiler will take precedence" >&5 +echo "$as_me: WARNING: sys/asoundlib.h: in the future, the compiler will take precedence" >&2;} + ( + cat <<\_ASBOX +## ------------------------------------------ ## +## Report this to the AC_PACKAGE_NAME lists. ## +## ------------------------------------------ ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; esac echo "$as_me:$LINENO: checking for sys/asoundlib.h" >&5 echo $ECHO_N "checking for sys/asoundlib.h... $ECHO_C" >&6 @@ -9116,18 +20076,30 @@ echo "$as_me:$LINENO: checking alsa/asoundlib.h usability" >&5 echo $ECHO_N "checking alsa/asoundlib.h usability... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ $ac_includes_default #include _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 + (eval $ac_compile) 2>conftest.er1 ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -9136,10 +20108,11 @@ ac_header_compiler=yes else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ac_header_compiler=no fi -rm -f conftest.$ac_objext conftest.$ac_ext +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 echo "${ECHO_T}$ac_header_compiler" >&6 @@ -9147,20 +20120,24 @@ echo "$as_me:$LINENO: checking alsa/asoundlib.h presence" >&5 echo $ECHO_N "checking alsa/asoundlib.h presence... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ #include _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? - egrep -v '^ *\+' conftest.er1 >conftest.err + grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag else ac_cpp_err= fi @@ -9171,7 +20148,8 @@ ac_header_preproc=yes else echo "$as_me: failed program was:" >&5 - cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ac_header_preproc=no fi rm -f conftest.err conftest.$ac_ext @@ -9179,19 +20157,36 @@ echo "${ECHO_T}$ac_header_preproc" >&6 # So? What about this header? -case $ac_header_compiler:$ac_header_preproc in - yes:no ) +case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in + yes:no: ) { echo "$as_me:$LINENO: WARNING: alsa/asoundlib.h: accepted by the compiler, rejected by the preprocessor!" >&5 echo "$as_me: WARNING: alsa/asoundlib.h: accepted by the compiler, rejected by the preprocessor!" >&2;} - { echo "$as_me:$LINENO: WARNING: alsa/asoundlib.h: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: alsa/asoundlib.h: proceeding with the preprocessor's result" >&2;};; - no:yes ) + { echo "$as_me:$LINENO: WARNING: alsa/asoundlib.h: proceeding with the compiler's result" >&5 +echo "$as_me: WARNING: alsa/asoundlib.h: proceeding with the compiler's result" >&2;} + ac_header_preproc=yes + ;; + no:yes:* ) { echo "$as_me:$LINENO: WARNING: alsa/asoundlib.h: present but cannot be compiled" >&5 echo "$as_me: WARNING: alsa/asoundlib.h: present but cannot be compiled" >&2;} - { echo "$as_me:$LINENO: WARNING: alsa/asoundlib.h: check for missing prerequisite headers?" >&5 -echo "$as_me: WARNING: alsa/asoundlib.h: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: alsa/asoundlib.h: check for missing prerequisite headers?" >&5 +echo "$as_me: WARNING: alsa/asoundlib.h: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: alsa/asoundlib.h: see the Autoconf documentation" >&5 +echo "$as_me: WARNING: alsa/asoundlib.h: see the Autoconf documentation" >&2;} + { echo "$as_me:$LINENO: WARNING: alsa/asoundlib.h: section \"Present But Cannot Be Compiled\"" >&5 +echo "$as_me: WARNING: alsa/asoundlib.h: section \"Present But Cannot Be Compiled\"" >&2;} { echo "$as_me:$LINENO: WARNING: alsa/asoundlib.h: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: alsa/asoundlib.h: proceeding with the preprocessor's result" >&2;};; +echo "$as_me: WARNING: alsa/asoundlib.h: proceeding with the preprocessor's result" >&2;} + { echo "$as_me:$LINENO: WARNING: alsa/asoundlib.h: in the future, the compiler will take precedence" >&5 +echo "$as_me: WARNING: alsa/asoundlib.h: in the future, the compiler will take precedence" >&2;} + ( + cat <<\_ASBOX +## ------------------------------------------ ## +## Report this to the AC_PACKAGE_NAME lists. ## +## ------------------------------------------ ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; esac echo "$as_me:$LINENO: checking for alsa/asoundlib.h" >&5 echo $ECHO_N "checking for alsa/asoundlib.h... $ECHO_C" >&6 @@ -9223,8 +20218,11 @@ ac_check_lib_save_LIBS=$LIBS LIBS="-lasound $LIBS" cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus @@ -9233,12 +20231,6 @@ /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char snd_seq_create_simple_port (); -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif int main () { @@ -9249,11 +20241,20 @@ _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 + (eval $ac_link) 2>conftest.er1 ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -s conftest$ac_exeext' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -9262,10 +20263,12 @@ ac_cv_lib_asound_snd_seq_create_simple_port=yes else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ac_cv_lib_asound_snd_seq_create_simple_port=no fi -rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi echo "$as_me:$LINENO: result: $ac_cv_lib_asound_snd_seq_create_simple_port" >&5 @@ -9276,8 +20279,11 @@ have_alsa="no" else cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ #include <$alsa_header_prefix/asoundlib.h> int main() { return SND_LIB_MINOR != 5 && SND_LIB_MINOR != 9; } @@ -9306,11 +20312,12 @@ else echo "$as_me: program exited with status $ac_status" >&5 echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ( exit $ac_status ) have_alsa="no" fi -rm -f core core.* *.core conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext fi else @@ -9329,8 +20336,11 @@ echo "$as_me: WARNING: Using Alsa whilst cross compiling. Presuming 0.9.x" >&2;} && cat "0.9" > $alsa_tmpfile else cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ #include <$alsa_header_prefix/asoundlib.h> #include @@ -9358,11 +20368,12 @@ else echo "$as_me: program exited with status $ac_status" >&5 echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ( exit $ac_status ) alsa_version="none" fi -rm -f core core.* *.core conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext fi alsa_version=`cat $alsa_tmpfile` rm $alsa_tmpfile @@ -9398,7 +20409,6 @@ HAVE_ALSA_FALSE= fi - echo "$as_me:$LINENO: checking whether ALSA is available" >&5 echo $ECHO_N "checking whether ALSA is available... $ECHO_C" >&6 if test "$have_alsa" = "yes"; then @@ -9458,7 +20468,6 @@ fi - if test "$with_alsa" = "yes" -a "$have_alsa" = "yes" -a "$alsa_version" = "0.5"; then TSE3_WITH_ALSA_0_5_X_TRUE= TSE3_WITH_ALSA_0_5_X_FALSE='#' @@ -9468,7 +20477,6 @@ fi - if test "$with_alsa" = "yes" -a "$have_alsa" = "yes" -a "$alsa_version" = "0.9"; then TSE3_WITH_ALSA_0_9_X_TRUE= TSE3_WITH_ALSA_0_9_X_FALSE='#' @@ -9477,7 +20485,6 @@ TSE3_WITH_ALSA_0_9_X_FALSE= fi - # ---------------------------------------------------------------------------- # Checks for aRts library support @@ -9499,18 +20506,30 @@ echo "$as_me:$LINENO: checking kde/arts/artsmidi.h usability" >&5 echo $ECHO_N "checking kde/arts/artsmidi.h usability... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ $ac_includes_default #include _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 + (eval $ac_compile) 2>conftest.er1 ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -9519,10 +20538,11 @@ ac_header_compiler=yes else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ac_header_compiler=no fi -rm -f conftest.$ac_objext conftest.$ac_ext +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 echo "${ECHO_T}$ac_header_compiler" >&6 @@ -9530,20 +20550,24 @@ echo "$as_me:$LINENO: checking kde/arts/artsmidi.h presence" >&5 echo $ECHO_N "checking kde/arts/artsmidi.h presence... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ #include _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? - egrep -v '^ *\+' conftest.er1 >conftest.err + grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag else ac_cpp_err= fi @@ -9554,7 +20578,8 @@ ac_header_preproc=yes else echo "$as_me: failed program was:" >&5 - cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ac_header_preproc=no fi rm -f conftest.err conftest.$ac_ext @@ -9562,19 +20587,36 @@ echo "${ECHO_T}$ac_header_preproc" >&6 # So? What about this header? -case $ac_header_compiler:$ac_header_preproc in - yes:no ) +case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in + yes:no: ) { echo "$as_me:$LINENO: WARNING: kde/arts/artsmidi.h: accepted by the compiler, rejected by the preprocessor!" >&5 echo "$as_me: WARNING: kde/arts/artsmidi.h: accepted by the compiler, rejected by the preprocessor!" >&2;} - { echo "$as_me:$LINENO: WARNING: kde/arts/artsmidi.h: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: kde/arts/artsmidi.h: proceeding with the preprocessor's result" >&2;};; - no:yes ) + { echo "$as_me:$LINENO: WARNING: kde/arts/artsmidi.h: proceeding with the compiler's result" >&5 +echo "$as_me: WARNING: kde/arts/artsmidi.h: proceeding with the compiler's result" >&2;} + ac_header_preproc=yes + ;; + no:yes:* ) { echo "$as_me:$LINENO: WARNING: kde/arts/artsmidi.h: present but cannot be compiled" >&5 echo "$as_me: WARNING: kde/arts/artsmidi.h: present but cannot be compiled" >&2;} - { echo "$as_me:$LINENO: WARNING: kde/arts/artsmidi.h: check for missing prerequisite headers?" >&5 -echo "$as_me: WARNING: kde/arts/artsmidi.h: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: kde/arts/artsmidi.h: check for missing prerequisite headers?" >&5 +echo "$as_me: WARNING: kde/arts/artsmidi.h: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: kde/arts/artsmidi.h: see the Autoconf documentation" >&5 +echo "$as_me: WARNING: kde/arts/artsmidi.h: see the Autoconf documentation" >&2;} + { echo "$as_me:$LINENO: WARNING: kde/arts/artsmidi.h: section \"Present But Cannot Be Compiled\"" >&5 +echo "$as_me: WARNING: kde/arts/artsmidi.h: section \"Present But Cannot Be Compiled\"" >&2;} { echo "$as_me:$LINENO: WARNING: kde/arts/artsmidi.h: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: kde/arts/artsmidi.h: proceeding with the preprocessor's result" >&2;};; +echo "$as_me: WARNING: kde/arts/artsmidi.h: proceeding with the preprocessor's result" >&2;} + { echo "$as_me:$LINENO: WARNING: kde/arts/artsmidi.h: in the future, the compiler will take precedence" >&5 +echo "$as_me: WARNING: kde/arts/artsmidi.h: in the future, the compiler will take precedence" >&2;} + ( + cat <<\_ASBOX +## ------------------------------------------ ## +## Report this to the AC_PACKAGE_NAME lists. ## +## ------------------------------------------ ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; esac echo "$as_me:$LINENO: checking for kde/arts/artsmidi.h" >&5 echo $ECHO_N "checking for kde/arts/artsmidi.h... $ECHO_C" >&6 @@ -9605,18 +20647,30 @@ echo "$as_me:$LINENO: checking arts/artsmidi.h usability" >&5 echo $ECHO_N "checking arts/artsmidi.h usability... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ $ac_includes_default #include _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 + (eval $ac_compile) 2>conftest.er1 ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -9625,10 +20679,11 @@ ac_header_compiler=yes else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ac_header_compiler=no fi -rm -f conftest.$ac_objext conftest.$ac_ext +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 echo "${ECHO_T}$ac_header_compiler" >&6 @@ -9636,20 +20691,24 @@ echo "$as_me:$LINENO: checking arts/artsmidi.h presence" >&5 echo $ECHO_N "checking arts/artsmidi.h presence... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ #include _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? - egrep -v '^ *\+' conftest.er1 >conftest.err + grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag else ac_cpp_err= fi @@ -9660,7 +20719,8 @@ ac_header_preproc=yes else echo "$as_me: failed program was:" >&5 - cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ac_header_preproc=no fi rm -f conftest.err conftest.$ac_ext @@ -9668,19 +20728,36 @@ echo "${ECHO_T}$ac_header_preproc" >&6 # So? What about this header? -case $ac_header_compiler:$ac_header_preproc in - yes:no ) +case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in + yes:no: ) { echo "$as_me:$LINENO: WARNING: arts/artsmidi.h: accepted by the compiler, rejected by the preprocessor!" >&5 echo "$as_me: WARNING: arts/artsmidi.h: accepted by the compiler, rejected by the preprocessor!" >&2;} - { echo "$as_me:$LINENO: WARNING: arts/artsmidi.h: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: arts/artsmidi.h: proceeding with the preprocessor's result" >&2;};; - no:yes ) + { echo "$as_me:$LINENO: WARNING: arts/artsmidi.h: proceeding with the compiler's result" >&5 +echo "$as_me: WARNING: arts/artsmidi.h: proceeding with the compiler's result" >&2;} + ac_header_preproc=yes + ;; + no:yes:* ) { echo "$as_me:$LINENO: WARNING: arts/artsmidi.h: present but cannot be compiled" >&5 echo "$as_me: WARNING: arts/artsmidi.h: present but cannot be compiled" >&2;} - { echo "$as_me:$LINENO: WARNING: arts/artsmidi.h: check for missing prerequisite headers?" >&5 -echo "$as_me: WARNING: arts/artsmidi.h: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: arts/artsmidi.h: check for missing prerequisite headers?" >&5 +echo "$as_me: WARNING: arts/artsmidi.h: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: arts/artsmidi.h: see the Autoconf documentation" >&5 +echo "$as_me: WARNING: arts/artsmidi.h: see the Autoconf documentation" >&2;} + { echo "$as_me:$LINENO: WARNING: arts/artsmidi.h: section \"Present But Cannot Be Compiled\"" >&5 +echo "$as_me: WARNING: arts/artsmidi.h: section \"Present But Cannot Be Compiled\"" >&2;} { echo "$as_me:$LINENO: WARNING: arts/artsmidi.h: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: arts/artsmidi.h: proceeding with the preprocessor's result" >&2;};; +echo "$as_me: WARNING: arts/artsmidi.h: proceeding with the preprocessor's result" >&2;} + { echo "$as_me:$LINENO: WARNING: arts/artsmidi.h: in the future, the compiler will take precedence" >&5 +echo "$as_me: WARNING: arts/artsmidi.h: in the future, the compiler will take precedence" >&2;} + ( + cat <<\_ASBOX +## ------------------------------------------ ## +## Report this to the AC_PACKAGE_NAME lists. ## +## ------------------------------------------ ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; esac echo "$as_me:$LINENO: checking for arts/artsmidi.h" >&5 echo $ECHO_N "checking for arts/artsmidi.h... $ECHO_C" >&6 @@ -9765,18 +20842,30 @@ echo "$as_me:$LINENO: checking /opt/kde3/include/arts/artsmidi.h usability" >&5 echo $ECHO_N "checking /opt/kde3/include/arts/artsmidi.h usability... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ $ac_includes_default #include _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 + (eval $ac_compile) 2>conftest.er1 ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -9785,10 +20874,11 @@ ac_header_compiler=yes else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ac_header_compiler=no fi -rm -f conftest.$ac_objext conftest.$ac_ext +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 echo "${ECHO_T}$ac_header_compiler" >&6 @@ -9796,20 +20886,24 @@ echo "$as_me:$LINENO: checking /opt/kde3/include/arts/artsmidi.h presence" >&5 echo $ECHO_N "checking /opt/kde3/include/arts/artsmidi.h presence... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ #include _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? - egrep -v '^ *\+' conftest.er1 >conftest.err + grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag else ac_cpp_err= fi @@ -9820,7 +20914,8 @@ ac_header_preproc=yes else echo "$as_me: failed program was:" >&5 - cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ac_header_preproc=no fi rm -f conftest.err conftest.$ac_ext @@ -9828,19 +20923,36 @@ echo "${ECHO_T}$ac_header_preproc" >&6 # So? What about this header? -case $ac_header_compiler:$ac_header_preproc in - yes:no ) +case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in + yes:no: ) { echo "$as_me:$LINENO: WARNING: /opt/kde3/include/arts/artsmidi.h: accepted by the compiler, rejected by the preprocessor!" >&5 echo "$as_me: WARNING: /opt/kde3/include/arts/artsmidi.h: accepted by the compiler, rejected by the preprocessor!" >&2;} - { echo "$as_me:$LINENO: WARNING: /opt/kde3/include/arts/artsmidi.h: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: /opt/kde3/include/arts/artsmidi.h: proceeding with the preprocessor's result" >&2;};; - no:yes ) + { echo "$as_me:$LINENO: WARNING: /opt/kde3/include/arts/artsmidi.h: proceeding with the compiler's result" >&5 +echo "$as_me: WARNING: /opt/kde3/include/arts/artsmidi.h: proceeding with the compiler's result" >&2;} + ac_header_preproc=yes + ;; + no:yes:* ) { echo "$as_me:$LINENO: WARNING: /opt/kde3/include/arts/artsmidi.h: present but cannot be compiled" >&5 echo "$as_me: WARNING: /opt/kde3/include/arts/artsmidi.h: present but cannot be compiled" >&2;} - { echo "$as_me:$LINENO: WARNING: /opt/kde3/include/arts/artsmidi.h: check for missing prerequisite headers?" >&5 -echo "$as_me: WARNING: /opt/kde3/include/arts/artsmidi.h: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: /opt/kde3/include/arts/artsmidi.h: check for missing prerequisite headers?" >&5 +echo "$as_me: WARNING: /opt/kde3/include/arts/artsmidi.h: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: /opt/kde3/include/arts/artsmidi.h: see the Autoconf documentation" >&5 +echo "$as_me: WARNING: /opt/kde3/include/arts/artsmidi.h: see the Autoconf documentation" >&2;} + { echo "$as_me:$LINENO: WARNING: /opt/kde3/include/arts/artsmidi.h: section \"Present But Cannot Be Compiled\"" >&5 +echo "$as_me: WARNING: /opt/kde3/include/arts/artsmidi.h: section \"Present But Cannot Be Compiled\"" >&2;} { echo "$as_me:$LINENO: WARNING: /opt/kde3/include/arts/artsmidi.h: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: /opt/kde3/include/arts/artsmidi.h: proceeding with the preprocessor's result" >&2;};; +echo "$as_me: WARNING: /opt/kde3/include/arts/artsmidi.h: proceeding with the preprocessor's result" >&2;} + { echo "$as_me:$LINENO: WARNING: /opt/kde3/include/arts/artsmidi.h: in the future, the compiler will take precedence" >&5 +echo "$as_me: WARNING: /opt/kde3/include/arts/artsmidi.h: in the future, the compiler will take precedence" >&2;} + ( + cat <<\_ASBOX +## ------------------------------------------ ## +## Report this to the AC_PACKAGE_NAME lists. ## +## ------------------------------------------ ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; esac echo "$as_me:$LINENO: checking for /opt/kde3/include/arts/artsmidi.h" >&5 echo $ECHO_N "checking for /opt/kde3/include/arts/artsmidi.h... $ECHO_C" >&6 @@ -9873,18 +20985,30 @@ echo "$as_me:$LINENO: checking /opt/kde2/include/arts/artsmidi.h usability" >&5 echo $ECHO_N "checking /opt/kde2/include/arts/artsmidi.h usability... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ $ac_includes_default #include _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 + (eval $ac_compile) 2>conftest.er1 ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -9893,10 +21017,11 @@ ac_header_compiler=yes else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ac_header_compiler=no fi -rm -f conftest.$ac_objext conftest.$ac_ext +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 echo "${ECHO_T}$ac_header_compiler" >&6 @@ -9904,20 +21029,24 @@ echo "$as_me:$LINENO: checking /opt/kde2/include/arts/artsmidi.h presence" >&5 echo $ECHO_N "checking /opt/kde2/include/arts/artsmidi.h presence... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ #include _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? - egrep -v '^ *\+' conftest.er1 >conftest.err + grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag else ac_cpp_err= fi @@ -9928,7 +21057,8 @@ ac_header_preproc=yes else echo "$as_me: failed program was:" >&5 - cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ac_header_preproc=no fi rm -f conftest.err conftest.$ac_ext @@ -9936,19 +21066,36 @@ echo "${ECHO_T}$ac_header_preproc" >&6 # So? What about this header? -case $ac_header_compiler:$ac_header_preproc in - yes:no ) +case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in + yes:no: ) { echo "$as_me:$LINENO: WARNING: /opt/kde2/include/arts/artsmidi.h: accepted by the compiler, rejected by the preprocessor!" >&5 echo "$as_me: WARNING: /opt/kde2/include/arts/artsmidi.h: accepted by the compiler, rejected by the preprocessor!" >&2;} - { echo "$as_me:$LINENO: WARNING: /opt/kde2/include/arts/artsmidi.h: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: /opt/kde2/include/arts/artsmidi.h: proceeding with the preprocessor's result" >&2;};; - no:yes ) + { echo "$as_me:$LINENO: WARNING: /opt/kde2/include/arts/artsmidi.h: proceeding with the compiler's result" >&5 +echo "$as_me: WARNING: /opt/kde2/include/arts/artsmidi.h: proceeding with the compiler's result" >&2;} + ac_header_preproc=yes + ;; + no:yes:* ) { echo "$as_me:$LINENO: WARNING: /opt/kde2/include/arts/artsmidi.h: present but cannot be compiled" >&5 echo "$as_me: WARNING: /opt/kde2/include/arts/artsmidi.h: present but cannot be compiled" >&2;} - { echo "$as_me:$LINENO: WARNING: /opt/kde2/include/arts/artsmidi.h: check for missing prerequisite headers?" >&5 -echo "$as_me: WARNING: /opt/kde2/include/arts/artsmidi.h: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: /opt/kde2/include/arts/artsmidi.h: check for missing prerequisite headers?" >&5 +echo "$as_me: WARNING: /opt/kde2/include/arts/artsmidi.h: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: /opt/kde2/include/arts/artsmidi.h: see the Autoconf documentation" >&5 +echo "$as_me: WARNING: /opt/kde2/include/arts/artsmidi.h: see the Autoconf documentation" >&2;} + { echo "$as_me:$LINENO: WARNING: /opt/kde2/include/arts/artsmidi.h: section \"Present But Cannot Be Compiled\"" >&5 +echo "$as_me: WARNING: /opt/kde2/include/arts/artsmidi.h: section \"Present But Cannot Be Compiled\"" >&2;} { echo "$as_me:$LINENO: WARNING: /opt/kde2/include/arts/artsmidi.h: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: /opt/kde2/include/arts/artsmidi.h: proceeding with the preprocessor's result" >&2;};; +echo "$as_me: WARNING: /opt/kde2/include/arts/artsmidi.h: proceeding with the preprocessor's result" >&2;} + { echo "$as_me:$LINENO: WARNING: /opt/kde2/include/arts/artsmidi.h: in the future, the compiler will take precedence" >&5 +echo "$as_me: WARNING: /opt/kde2/include/arts/artsmidi.h: in the future, the compiler will take precedence" >&2;} + ( + cat <<\_ASBOX +## ------------------------------------------ ## +## Report this to the AC_PACKAGE_NAME lists. ## +## ------------------------------------------ ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; esac echo "$as_me:$LINENO: checking for /opt/kde2/include/arts/artsmidi.h" >&5 echo $ECHO_N "checking for /opt/kde2/include/arts/artsmidi.h... $ECHO_C" >&6 @@ -9985,8 +21132,11 @@ ac_check_lib_save_LIBS=$LIBS LIBS="-lartsc $LIBS" cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus @@ -9995,12 +21145,6 @@ /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char arts_init (); -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif int main () { @@ -10011,11 +21155,20 @@ _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 + (eval $ac_link) 2>conftest.er1 ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -s conftest$ac_exeext' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -10024,10 +21177,12 @@ ac_cv_lib_artsc_arts_init=yes else echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ac_cv_lib_artsc_arts_init=no fi -rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi echo "$as_me:$LINENO: result: $ac_cv_lib_artsc_arts_init" >&5 @@ -10063,7 +21218,6 @@ HAVE_ARTS_FALSE= fi - echo "$as_me:$LINENO: checking whether aRts is available" >&5 echo $ECHO_N "checking whether aRts is available... $ECHO_C" >&6 if test "$have_aRts" = "yes"; then @@ -10115,7 +21269,6 @@ TSE3_WITH_ARTS_FALSE= fi - # ---------------------------------------------------------------------------- # Checks for WIN32 platform @@ -10180,12 +21333,11 @@ fi - # ---------------------------------------------------------------------------- # Finally, output the makefiles # ---------------------------------------------------------------------------- -ac_config_files="$ac_config_files Makefile doc/Makefile demos/Makefile src/Makefile src/tse3/Makefile src/tse3/app/Makefile src/tse3/cmd/Makefile src/tse3/file/Makefile src/tse3/ins/Makefile src/tse3/plt/Makefile src/tse3/util/Makefile src/tse3/listen/Makefile src/tse3/listen/app/Makefile src/tse3/listen/cmd/Makefile src/tse3/listen/ins/Makefile src/tse3play/Makefile src/examples/Makefile src/examples/contents/Makefile src/examples/scale/Makefile src/examples/midifile/Makefile src/examples/ports/Makefile src/examples/recording/Makefile" + ac_config_files="$ac_config_files Makefile doc/Makefile demos/Makefile src/Makefile src/tse3/Makefile src/tse3/app/Makefile src/tse3/cmd/Makefile src/tse3/file/Makefile src/tse3/ins/Makefile src/tse3/plt/Makefile src/tse3/util/Makefile src/tse3/listen/Makefile src/tse3/listen/app/Makefile src/tse3/listen/cmd/Makefile src/tse3/listen/ins/Makefile src/tse3play/Makefile src/examples/Makefile src/examples/contents/Makefile src/examples/scale/Makefile src/examples/midifile/Makefile src/examples/ports/Makefile src/examples/recording/Makefile" cat >confcache <<\_ACEOF # This file is a shell script that caches the results of configure # tests run on this system so they can be shared between configure @@ -10196,7 +21348,7 @@ # config.status only pays attention to the cache file if you give it # the --recheck option to rerun configure. # -# `ac_cv_env_foo' variables (set or unset) will be overriden when +# `ac_cv_env_foo' variables (set or unset) will be overridden when # loading this file, other *unset* `ac_cv_foo' will be assigned the # following values. @@ -10214,13 +21366,13 @@ # `set' does not quote correctly, so add quotes (double-quote # substitution turns \\\\ into \\, and sed turns \\ into \). sed -n \ - "s/'/'\\\\''/g; - s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" + "s/'/'\\\\''/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" ;; *) # `set' quotes correctly as required by POSIX, so do not add quotes. sed -n \ - "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" + "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" ;; esac; } | @@ -10231,7 +21383,7 @@ t end /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ : end' >>confcache -if cmp -s $cache_file confcache; then :; else +if diff $cache_file confcache >/dev/null 2>&1; then :; else if test -w $cache_file; then test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file" cat confcache >$cache_file @@ -10250,95 +21402,33 @@ # trailing colons and then remove the whole line if VPATH becomes empty # (actually we leave an empty line to preserve line numbers). if test "x$srcdir" = x.; then - ac_vpsub='/^[ ]*VPATH[ ]*=/{ + ac_vpsub='/^[ ]*VPATH[ ]*=/{ s/:*\$(srcdir):*/:/; s/:*\${srcdir}:*/:/; s/:*@srcdir@:*/:/; -s/^\([^=]*=[ ]*\):*/\1/; +s/^\([^=]*=[ ]*\):*/\1/; s/:*$//; -s/^[^=]*=[ ]*$//; +s/^[^=]*=[ ]*$//; }' fi DEFS=-DHAVE_CONFIG_H -if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then - { { echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined. -Usually this means the macro was only invoked conditionally." >&5 -echo "$as_me: error: conditional \"AMDEP\" was never defined. -Usually this means the macro was only invoked conditionally." >&2;} - { (exit 1); exit 1; }; } -fi -if test -z "${INSTALL_TSE3_DOC_TRUE}" && test -z "${INSTALL_TSE3_DOC_FALSE}"; then - { { echo "$as_me:$LINENO: error: conditional \"INSTALL_TSE3_DOC\" was never defined. -Usually this means the macro was only invoked conditionally." >&5 -echo "$as_me: error: conditional \"INSTALL_TSE3_DOC\" was never defined. -Usually this means the macro was only invoked conditionally." >&2;} - { (exit 1); exit 1; }; } -fi -if test -z "${HAVE_OSS_TRUE}" && test -z "${HAVE_OSS_FALSE}"; then - { { echo "$as_me:$LINENO: error: conditional \"HAVE_OSS\" was never defined. -Usually this means the macro was only invoked conditionally." >&5 -echo "$as_me: error: conditional \"HAVE_OSS\" was never defined. -Usually this means the macro was only invoked conditionally." >&2;} - { (exit 1); exit 1; }; } -fi -if test -z "${TSE3_WITH_OSS_TRUE}" && test -z "${TSE3_WITH_OSS_FALSE}"; then - { { echo "$as_me:$LINENO: error: conditional \"TSE3_WITH_OSS\" was never defined. -Usually this means the macro was only invoked conditionally." >&5 -echo "$as_me: error: conditional \"TSE3_WITH_OSS\" was never defined. -Usually this means the macro was only invoked conditionally." >&2;} - { (exit 1); exit 1; }; } -fi -if test -z "${HAVE_ALSA_TRUE}" && test -z "${HAVE_ALSA_FALSE}"; then - { { echo "$as_me:$LINENO: error: conditional \"HAVE_ALSA\" was never defined. -Usually this means the macro was only invoked conditionally." >&5 -echo "$as_me: error: conditional \"HAVE_ALSA\" was never defined. -Usually this means the macro was only invoked conditionally." >&2;} - { (exit 1); exit 1; }; } -fi -if test -z "${TSE3_WITH_ALSA_TRUE}" && test -z "${TSE3_WITH_ALSA_FALSE}"; then - { { echo "$as_me:$LINENO: error: conditional \"TSE3_WITH_ALSA\" was never defined. -Usually this means the macro was only invoked conditionally." >&5 -echo "$as_me: error: conditional \"TSE3_WITH_ALSA\" was never defined. -Usually this means the macro was only invoked conditionally." >&2;} - { (exit 1); exit 1; }; } -fi -if test -z "${TSE3_WITH_ALSA_0_5_X_TRUE}" && test -z "${TSE3_WITH_ALSA_0_5_X_FALSE}"; then - { { echo "$as_me:$LINENO: error: conditional \"TSE3_WITH_ALSA_0_5_X\" was never defined. -Usually this means the macro was only invoked conditionally." >&5 -echo "$as_me: error: conditional \"TSE3_WITH_ALSA_0_5_X\" was never defined. -Usually this means the macro was only invoked conditionally." >&2;} - { (exit 1); exit 1; }; } -fi -if test -z "${TSE3_WITH_ALSA_0_9_X_TRUE}" && test -z "${TSE3_WITH_ALSA_0_9_X_FALSE}"; then - { { echo "$as_me:$LINENO: error: conditional \"TSE3_WITH_ALSA_0_9_X\" was never defined. -Usually this means the macro was only invoked conditionally." >&5 -echo "$as_me: error: conditional \"TSE3_WITH_ALSA_0_9_X\" was never defined. -Usually this means the macro was only invoked conditionally." >&2;} - { (exit 1); exit 1; }; } -fi -if test -z "${HAVE_ARTS_TRUE}" && test -z "${HAVE_ARTS_FALSE}"; then - { { echo "$as_me:$LINENO: error: conditional \"HAVE_ARTS\" was never defined. -Usually this means the macro was only invoked conditionally." >&5 -echo "$as_me: error: conditional \"HAVE_ARTS\" was never defined. -Usually this means the macro was only invoked conditionally." >&2;} - { (exit 1); exit 1; }; } -fi -if test -z "${TSE3_WITH_ARTS_TRUE}" && test -z "${TSE3_WITH_ARTS_FALSE}"; then - { { echo "$as_me:$LINENO: error: conditional \"TSE3_WITH_ARTS\" was never defined. -Usually this means the macro was only invoked conditionally." >&5 -echo "$as_me: error: conditional \"TSE3_WITH_ARTS\" was never defined. -Usually this means the macro was only invoked conditionally." >&2;} - { (exit 1); exit 1; }; } -fi -if test -z "${TSE3_WITH_WIN32_TRUE}" && test -z "${TSE3_WITH_WIN32_FALSE}"; then - { { echo "$as_me:$LINENO: error: conditional \"TSE3_WITH_WIN32\" was never defined. -Usually this means the macro was only invoked conditionally." >&5 -echo "$as_me: error: conditional \"TSE3_WITH_WIN32\" was never defined. -Usually this means the macro was only invoked conditionally." >&2;} - { (exit 1); exit 1; }; } -fi +ac_libobjs= +ac_ltlibobjs= +for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue + # 1. Remove the extension, and $U if already installed. + ac_i=`echo "$ac_i" | + sed 's/\$U\././;s/\.o$//;s/\.obj$//'` + # 2. Add them. + ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext" + ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo' +done +LIBOBJS=$ac_libobjs + +LTLIBOBJS=$ac_ltlibobjs + + : ${CONFIG_STATUS=./config.status} ac_clean_files_save=$ac_clean_files @@ -10353,11 +21443,12 @@ # configure, is in config.log if it exists. debug=false +ac_cs_recheck=false +ac_cs_silent=false SHELL=\${CONFIG_SHELL-$SHELL} _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF - ## --------------------- ## ## M4sh Initialization. ## ## --------------------- ## @@ -10366,46 +21457,57 @@ if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then emulate sh NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then set -o posix fi +DUALCASE=1; export DUALCASE # for MKS sh -# NLS nuisances. # Support unset when possible. -if (FOO=FOO; unset FOO) >/dev/null 2>&1; then +if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then as_unset=unset else as_unset=false fi -(set +x; test -n "`(LANG=C; export LANG) 2>&1`") && - { $as_unset LANG || test "${LANG+set}" != set; } || - { LANG=C; export LANG; } -(set +x; test -n "`(LC_ALL=C; export LC_ALL) 2>&1`") && - { $as_unset LC_ALL || test "${LC_ALL+set}" != set; } || - { LC_ALL=C; export LC_ALL; } -(set +x; test -n "`(LC_TIME=C; export LC_TIME) 2>&1`") && - { $as_unset LC_TIME || test "${LC_TIME+set}" != set; } || - { LC_TIME=C; export LC_TIME; } -(set +x; test -n "`(LC_CTYPE=C; export LC_CTYPE) 2>&1`") && - { $as_unset LC_CTYPE || test "${LC_CTYPE+set}" != set; } || - { LC_CTYPE=C; export LC_CTYPE; } -(set +x; test -n "`(LANGUAGE=C; export LANGUAGE) 2>&1`") && - { $as_unset LANGUAGE || test "${LANGUAGE+set}" != set; } || - { LANGUAGE=C; export LANGUAGE; } -(set +x; test -n "`(LC_COLLATE=C; export LC_COLLATE) 2>&1`") && - { $as_unset LC_COLLATE || test "${LC_COLLATE+set}" != set; } || - { LC_COLLATE=C; export LC_COLLATE; } -(set +x; test -n "`(LC_NUMERIC=C; export LC_NUMERIC) 2>&1`") && - { $as_unset LC_NUMERIC || test "${LC_NUMERIC+set}" != set; } || - { LC_NUMERIC=C; export LC_NUMERIC; } -(set +x; test -n "`(LC_MESSAGES=C; export LC_MESSAGES) 2>&1`") && - { $as_unset LC_MESSAGES || test "${LC_MESSAGES+set}" != set; } || - { LC_MESSAGES=C; export LC_MESSAGES; } + +# Work around bugs in pre-3.0 UWIN ksh. +$as_unset ENV MAIL MAILPATH +PS1='$ ' +PS2='> ' +PS4='+ ' + +# NLS nuisances. +for as_var in \ + LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ + LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ + LC_TELEPHONE LC_TIME +do + if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then + eval $as_var=C; export $as_var + else + $as_unset $as_var + fi +done + +# Required to use basename. +if expr a : '\(a\)' >/dev/null 2>&1; then + as_expr=expr +else + as_expr=false +fi + +if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi # Name of the executable. -as_me=`(basename "$0") 2>/dev/null || +as_me=`$as_basename "$0" || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ X"$0" : 'X\(/\)$' \| \ @@ -10416,6 +21518,7 @@ /^X\/\(\/\).*/{ s//\1/; q; } s/.*/./; q'` + # PATH needs CR, and LINENO needs CR and PATH. # Avoid depending upon Character Ranges. as_cr_letters='abcdefghijklmnopqrstuvwxyz' @@ -10426,15 +21529,15 @@ # The user is always right. if test "${PATH_SEPARATOR+set}" != set; then - echo "#! /bin/sh" >conftest.sh - echo "exit 0" >>conftest.sh - chmod +x conftest.sh - if (PATH=".;."; conftest.sh) >/dev/null 2>&1; then + echo "#! /bin/sh" >conf$$.sh + echo "exit 0" >>conf$$.sh + chmod +x conf$$.sh + if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then PATH_SEPARATOR=';' else PATH_SEPARATOR=: fi - rm -f conftest.sh + rm -f conf$$.sh fi @@ -10483,6 +21586,8 @@ as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` test "x$as_lineno_1" != "x$as_lineno_2" && test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then + $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } + $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } CONFIG_SHELL=$as_dir/$as_base export CONFIG_SHELL exec "$CONFIG_SHELL" "$0" ${1+"$@"} @@ -10556,13 +21661,20 @@ fi rm -f conf$$ conf$$.exe conf$$.file +if mkdir -p . 2>/dev/null; then + as_mkdir_p=: +else + test -d ./-p && rmdir ./-p + as_mkdir_p=false +fi + as_executable_p="test -f" # Sed expression to map a string onto a valid CPP name. -as_tr_cpp="sed y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g" +as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" # Sed expression to map a string onto a valid variable name. -as_tr_sh="sed y%*+%pp%;s%[^_$as_cr_alnum]%_%g" +as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" # IFS @@ -10572,7 +21684,7 @@ IFS=" $as_nl" # CDPATH. -$as_unset CDPATH || test "${CDPATH+set}" != set || { CDPATH=$PATH_SEPARATOR; export CDPATH; } +$as_unset CDPATH exec 6>&1 @@ -10589,7 +21701,7 @@ cat >&5 <<_CSEOF This file was extended by $as_me, which was -generated by GNU Autoconf 2.53. Invocation command line was +generated by GNU Autoconf 2.59. Invocation command line was CONFIG_FILES = $CONFIG_FILES CONFIG_HEADERS = $CONFIG_HEADERS @@ -10629,12 +21741,13 @@ -h, --help print this help, then exit -V, --version print version number, then exit + -q, --quiet do not print progress messages -d, --debug don't remove temporary files --recheck update $as_me by reconfiguring in the same conditions --file=FILE[:TEMPLATE] - instantiate the configuration file FILE + instantiate the configuration file FILE --header=FILE[:TEMPLATE] - instantiate the configuration header FILE + instantiate the configuration header FILE Configuration files: $config_files @@ -10651,11 +21764,10 @@ cat >>$CONFIG_STATUS <<_ACEOF ac_cs_version="\\ config.status -configured by $0, generated by GNU Autoconf 2.53, +configured by $0, generated by GNU Autoconf 2.59, with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\" -Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001 -Free Software Foundation, Inc. +Copyright (C) 2003 Free Software Foundation, Inc. This config.status script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it." srcdir=$srcdir @@ -10672,25 +21784,25 @@ --*=*) ac_option=`expr "x$1" : 'x\([^=]*\)='` ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'` - shift - set dummy "$ac_option" "$ac_optarg" ${1+"$@"} - shift + ac_shift=: + ;; + -*) + ac_option=$1 + ac_optarg=$2 + ac_shift=shift ;; - -*);; *) # This is not an option, so the user has probably given explicit # arguments. + ac_option=$1 ac_need_defaults=false;; esac - case $1 in + case $ac_option in # Handling of the options. _ACEOF -cat >>$CONFIG_STATUS <<_ACEOF - -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) - echo "running $SHELL $0 " $ac_configure_args " --no-create --no-recursion" - exec $SHELL $0 $ac_configure_args --no-create --no-recursion ;; -_ACEOF cat >>$CONFIG_STATUS <<\_ACEOF + -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) + ac_cs_recheck=: ;; --version | --vers* | -V ) echo "$ac_cs_version"; exit 0 ;; --he | --h) @@ -10705,13 +21817,16 @@ --debug | --d* | -d ) debug=: ;; --file | --fil | --fi | --f ) - shift - CONFIG_FILES="$CONFIG_FILES $1" + $ac_shift + CONFIG_FILES="$CONFIG_FILES $ac_optarg" ac_need_defaults=false;; --header | --heade | --head | --hea ) - shift - CONFIG_HEADERS="$CONFIG_HEADERS $1" + $ac_shift + CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg" ac_need_defaults=false;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil | --si | --s) + ac_cs_silent=: ;; # This is an error. -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1 @@ -10726,6 +21841,20 @@ shift done +ac_configure_extra_args= + +if $ac_cs_silent; then + exec 6>/dev/null + ac_configure_extra_args="$ac_configure_extra_args --silent" +fi + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF +if \$ac_cs_recheck; then + echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6 + exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion +fi + _ACEOF cat >>$CONFIG_STATUS <<_ACEOF @@ -10733,7 +21862,7 @@ # INIT-COMMANDS section. # -AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" + _ACEOF @@ -10766,7 +21895,7 @@ "src/examples/midifile/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/examples/midifile/Makefile" ;; "src/examples/ports/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/examples/ports/Makefile" ;; "src/examples/recording/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/examples/recording/Makefile" ;; - "depfiles" ) CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; + "default-1" ) CONFIG_COMMANDS="$CONFIG_COMMANDS default-1" ;; "config.h" ) CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 echo "$as_me: error: invalid argument: $ac_config_target" >&2;} @@ -10784,6 +21913,9 @@ test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands fi +# Have a temporary directory for convenience. Make it in the build tree +# simply because there is no reason to put it here, and in addition, +# creating and moving files from /tmp can sometimes cause problems. # Create a temporary directory, and hook for its removal unless debugging. $debug || { @@ -10792,17 +21924,17 @@ } # Create a (secure) tmp directory for tmp files. -: ${TMPDIR=/tmp} + { - tmp=`(umask 077 && mktemp -d -q "$TMPDIR/csXXXXXX") 2>/dev/null` && + tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" } || { - tmp=$TMPDIR/cs$$-$RANDOM + tmp=./confstat$$-$RANDOM (umask 077 && mkdir $tmp) } || { - echo "$me: cannot create a temporary directory in $TMPDIR" >&2 + echo "$me: cannot create a temporary directory in ." >&2 { (exit 1); exit 1; } } @@ -10860,12 +21992,6 @@ s,@AUTOMAKE@,$AUTOMAKE,;t t s,@AUTOHEADER@,$AUTOHEADER,;t t s,@MAKEINFO@,$MAKEINFO,;t t -s,@AMTAR@,$AMTAR,;t t -s,@install_sh@,$install_sh,;t t -s,@STRIP@,$STRIP,;t t -s,@ac_ct_STRIP@,$ac_ct_STRIP,;t t -s,@INSTALL_STRIP_PROGRAM@,$INSTALL_STRIP_PROGRAM,;t t -s,@AWK@,$AWK,;t t s,@SET_MAKE@,$SET_MAKE,;t t s,@CC@,$CC,;t t s,@CFLAGS@,$CFLAGS,;t t @@ -10874,18 +22000,10 @@ s,@ac_ct_CC@,$ac_ct_CC,;t t s,@EXEEXT@,$EXEEXT,;t t s,@OBJEXT@,$OBJEXT,;t t -s,@DEPDIR@,$DEPDIR,;t t -s,@am__include@,$am__include,;t t -s,@am__quote@,$am__quote,;t t -s,@AMDEP_TRUE@,$AMDEP_TRUE,;t t -s,@AMDEP_FALSE@,$AMDEP_FALSE,;t t -s,@AMDEPBACKSLASH@,$AMDEPBACKSLASH,;t t -s,@CCDEPMODE@,$CCDEPMODE,;t t s,@CPP@,$CPP,;t t s,@CXX@,$CXX,;t t s,@CXXFLAGS@,$CXXFLAGS,;t t s,@ac_ct_CXX@,$ac_ct_CXX,;t t -s,@CXXDEPMODE@,$CXXDEPMODE,;t t s,@build@,$build,;t t s,@build_cpu@,$build_cpu,;t t s,@build_vendor@,$build_vendor,;t t @@ -10894,10 +22012,19 @@ s,@host_cpu@,$host_cpu,;t t s,@host_vendor@,$host_vendor,;t t s,@host_os@,$host_os,;t t +s,@EGREP@,$EGREP,;t t s,@LN_S@,$LN_S,;t t s,@ECHO@,$ECHO,;t t +s,@AR@,$AR,;t t +s,@ac_ct_AR@,$ac_ct_AR,;t t s,@RANLIB@,$RANLIB,;t t s,@ac_ct_RANLIB@,$ac_ct_RANLIB,;t t +s,@STRIP@,$STRIP,;t t +s,@ac_ct_STRIP@,$ac_ct_STRIP,;t t +s,@CXXCPP@,$CXXCPP,;t t +s,@F77@,$F77,;t t +s,@FFLAGS@,$FFLAGS,;t t +s,@ac_ct_F77@,$ac_ct_F77,;t t s,@LIBTOOL@,$LIBTOOL,;t t s,@LIBTOOL_DEPS@,$LIBTOOL_DEPS,;t t s,@CPP_MM@,$CPP_MM,;t t @@ -10932,6 +22059,8 @@ s,@TSE3_WITH_WIN32@,$TSE3_WITH_WIN32,;t t s,@TSE3_WITH_WIN32_TRUE@,$TSE3_WITH_WIN32_TRUE,;t t s,@TSE3_WITH_WIN32_FALSE@,$TSE3_WITH_WIN32_FALSE,;t t +s,@LIBOBJS@,$LIBOBJS,;t t +s,@LTLIBOBJS@,$LTLIBOBJS,;t t CEOF _ACEOF @@ -10961,9 +22090,9 @@ (echo ':t /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed if test -z "$ac_sed_cmds"; then - ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed" + ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed" else - ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed" + ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed" fi ac_sed_frag=`expr $ac_sed_frag + 1` ac_beg=$ac_end @@ -10981,46 +22110,51 @@ # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". case $ac_file in - | *:- | *:-:* ) # input from stdin - cat >$tmp/stdin - ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` - ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; + cat >$tmp/stdin + ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` + ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` - ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; + ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; * ) ac_file_in=$ac_file.in ;; esac # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories. ac_dir=`(dirname "$ac_file") 2>/dev/null || $as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$ac_file" : 'X\(//\)[^/]' \| \ - X"$ac_file" : 'X\(//\)$' \| \ - X"$ac_file" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || + X"$ac_file" : 'X\(//\)[^/]' \| \ + X"$ac_file" : 'X\(//\)$' \| \ + X"$ac_file" : 'X\(/\)' \| \ + . : '\(.\)' 2>/dev/null || echo X"$ac_file" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } /^X\(\/\/\)[^/].*/{ s//\1/; q; } /^X\(\/\/\)$/{ s//\1/; q; } /^X\(\/\).*/{ s//\1/; q; } s/.*/./; q'` - { case "$ac_dir" in - [\\/]* | ?:[\\/]* ) as_incr_dir=;; - *) as_incr_dir=.;; -esac -as_dummy="$ac_dir" -for as_mkdir_dir in `IFS='/\\'; set X $as_dummy; shift; echo "$@"`; do - case $as_mkdir_dir in - # Skip DOS drivespec - ?:) as_incr_dir=$as_mkdir_dir ;; - *) - as_incr_dir=$as_incr_dir/$as_mkdir_dir - test -d "$as_incr_dir" || - mkdir "$as_incr_dir" || - { { echo "$as_me:$LINENO: error: cannot create \"$ac_dir\"" >&5 -echo "$as_me: error: cannot create \"$ac_dir\"" >&2;} - { (exit 1); exit 1; }; } - ;; - esac -done; } + { if $as_mkdir_p; then + mkdir -p "$ac_dir" + else + as_dir="$ac_dir" + as_dirs= + while test ! -d "$as_dir"; do + as_dirs="$as_dir $as_dirs" + as_dir=`(dirname "$as_dir") 2>/dev/null || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| \ + . : '\(.\)' 2>/dev/null || +echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } + /^X\(\/\/\)[^/].*/{ s//\1/; q; } + /^X\(\/\/\)$/{ s//\1/; q; } + /^X\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + done + test ! -n "$as_dirs" || mkdir $as_dirs + fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 +echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} + { (exit 1); exit 1; }; }; } ac_builddir=. @@ -11047,12 +22181,45 @@ ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix ac_top_srcdir=$ac_top_builddir$srcdir ;; esac -# Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be -# absolute. -ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd` -ac_abs_top_builddir=`cd "$ac_dir" && cd $ac_top_builddir && pwd` -ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd` -ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd` + +# Do not use `cd foo && pwd` to compute absolute paths, because +# the directories may not exist. +case `pwd` in +.) ac_abs_builddir="$ac_dir";; +*) + case "$ac_dir" in + .) ac_abs_builddir=`pwd`;; + [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; + *) ac_abs_builddir=`pwd`/"$ac_dir";; + esac;; +esac +case $ac_abs_builddir in +.) ac_abs_top_builddir=${ac_top_builddir}.;; +*) + case ${ac_top_builddir}. in + .) ac_abs_top_builddir=$ac_abs_builddir;; + [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; + *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; + esac;; +esac +case $ac_abs_builddir in +.) ac_abs_srcdir=$ac_srcdir;; +*) + case $ac_srcdir in + .) ac_abs_srcdir=$ac_abs_builddir;; + [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; + *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; + esac;; +esac +case $ac_abs_builddir in +.) ac_abs_top_srcdir=$ac_top_srcdir;; +*) + case $ac_top_srcdir in + .) ac_abs_top_srcdir=$ac_abs_builddir;; + [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; + *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; + esac;; +esac case $INSTALL in @@ -11060,11 +22227,6 @@ *) ac_INSTALL=$ac_top_builddir$INSTALL ;; esac - if test x"$ac_file" != x-; then - { echo "$as_me:$LINENO: creating $ac_file" >&5 -echo "$as_me: creating $ac_file" >&6;} - rm -f "$ac_file" - fi # Let's still pretend it is `configure' which instantiates (i.e., don't # use $as_me), people would be surprised to read: # /* config.h. Generated by config.status. */ @@ -11074,7 +22236,7 @@ configure_input="$ac_file. " fi configure_input=$configure_input"Generated from `echo $ac_file_in | - sed 's,.*/,,'` by configure." + sed 's,.*/,,'` by configure." # First look for the input files in the build tree, otherwise in the # src tree. @@ -11083,26 +22245,32 @@ case $f in -) echo $tmp/stdin ;; [\\/$]*) - # Absolute (can't be DOS-style, as IFS=:) - test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 + # Absolute (can't be DOS-style, as IFS=:) + test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 echo "$as_me: error: cannot find input file: $f" >&2;} { (exit 1); exit 1; }; } - echo $f;; + echo "$f";; *) # Relative - if test -f "$f"; then - # Build tree - echo $f - elif test -f "$srcdir/$f"; then - # Source tree - echo $srcdir/$f - else - # /dev/null tree - { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 + if test -f "$f"; then + # Build tree + echo "$f" + elif test -f "$srcdir/$f"; then + # Source tree + echo "$srcdir/$f" + else + # /dev/null tree + { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 echo "$as_me: error: cannot find input file: $f" >&2;} { (exit 1); exit 1; }; } - fi;; + fi;; esac done` || { (exit 1); exit 1; } + + if test x"$ac_file" != x-; then + { echo "$as_me:$LINENO: creating $ac_file" >&5 +echo "$as_me: creating $ac_file" >&6;} + rm -f "$ac_file" + fi _ACEOF cat >>$CONFIG_STATUS <<_ACEOF sed "$ac_vpsub @@ -11142,12 +22310,12 @@ # NAME is the cpp macro being defined and VALUE is the value it is being given. # # ac_d sets the value in "#define NAME VALUE" lines. -ac_dA='s,^\([ ]*\)#\([ ]*define[ ][ ]*\)' -ac_dB='[ ].*$,\1#\2' +ac_dA='s,^\([ ]*\)#\([ ]*define[ ][ ]*\)' +ac_dB='[ ].*$,\1#\2' ac_dC=' ' ac_dD=',;t' # ac_u turns "#undef NAME" without trailing blanks into "#define NAME VALUE". -ac_uA='s,^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)' +ac_uA='s,^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)' ac_uB='$,\1#\2define\3' ac_uC=' ' ac_uD=',;t' @@ -11156,11 +22324,11 @@ # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". case $ac_file in - | *:- | *:-:* ) # input from stdin - cat >$tmp/stdin - ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` - ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; + cat >$tmp/stdin + ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` + ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` - ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; + ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; * ) ac_file_in=$ac_file.in ;; esac @@ -11174,28 +22342,29 @@ case $f in -) echo $tmp/stdin ;; [\\/$]*) - # Absolute (can't be DOS-style, as IFS=:) - test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 + # Absolute (can't be DOS-style, as IFS=:) + test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 echo "$as_me: error: cannot find input file: $f" >&2;} { (exit 1); exit 1; }; } - echo $f;; + # Do quote $f, to prevent DOS paths from being IFS'd. + echo "$f";; *) # Relative - if test -f "$f"; then - # Build tree - echo $f - elif test -f "$srcdir/$f"; then - # Source tree - echo $srcdir/$f - else - # /dev/null tree - { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 + if test -f "$f"; then + # Build tree + echo "$f" + elif test -f "$srcdir/$f"; then + # Source tree + echo "$srcdir/$f" + else + # /dev/null tree + { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 echo "$as_me: error: cannot find input file: $f" >&2;} { (exit 1); exit 1; }; } - fi;; + fi;; esac done` || { (exit 1); exit 1; } # Remove the trailing spaces. - sed 's/[ ]*$//' $ac_file_inputs >$tmp/in + sed 's/[ ]*$//' $ac_file_inputs >$tmp/in _ACEOF @@ -11218,9 +22387,9 @@ s,[\\$`],\\&,g t clear : clear -s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*\)\(([^)]*)\)[ ]*\(.*\)$,${ac_dA}\1${ac_dB}\1\2${ac_dC}\3${ac_dD},gp +s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*\)\(([^)]*)\)[ ]*\(.*\)$,${ac_dA}\1${ac_dB}\1\2${ac_dC}\3${ac_dD},gp t end -s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)$,${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD},gp +s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)$,${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD},gp : end _ACEOF # If some macros were called several times there might be several times @@ -11234,13 +22403,13 @@ # example, in the case of _POSIX_SOURCE, which is predefined and required # on some systems where configure will not decide to define it. cat >>conftest.undefs <<\_ACEOF -s,^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*,/* & */, +s,^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*,/* & */, _ACEOF # Break up conftest.defines because some shells have a limit on the size # of here documents, and old seds have small limits too (100 cmds). echo ' # Handle all the #define templates only if necessary.' >>$CONFIG_STATUS -echo ' if egrep "^[ ]*#[ ]*define" $tmp/in >/dev/null; then' >>$CONFIG_STATUS +echo ' if grep "^[ ]*#[ ]*define" $tmp/in >/dev/null; then' >>$CONFIG_STATUS echo ' # If there are no defines, we may have an empty if/fi' >>$CONFIG_STATUS echo ' :' >>$CONFIG_STATUS rm -f conftest.tail @@ -11249,7 +22418,7 @@ # Write a limited-size here document to $tmp/defines.sed. echo ' cat >$tmp/defines.sed <>$CONFIG_STATUS # Speed up: don't consider the non `#define' lines. - echo '/^[ ]*#[ ]*define/!b' >>$CONFIG_STATUS + echo '/^[ ]*#[ ]*define/!b' >>$CONFIG_STATUS # Work around the forget-to-reset-the-flag bug. echo 't clr' >>$CONFIG_STATUS echo ': clr' >>$CONFIG_STATUS @@ -11264,7 +22433,7 @@ mv conftest.tail conftest.defines done rm -f conftest.defines -echo ' fi # egrep' >>$CONFIG_STATUS +echo ' fi # grep' >>$CONFIG_STATUS echo >>$CONFIG_STATUS # Break up conftest.undefs because some shells have a limit on the size @@ -11276,7 +22445,7 @@ # Write a limited-size here document to $tmp/undefs.sed. echo ' cat >$tmp/undefs.sed <>$CONFIG_STATUS # Speed up: don't consider the non `#undef' - echo '/^[ ]*#[ ]*undef/!b' >>$CONFIG_STATUS + echo '/^[ ]*#[ ]*undef/!b' >>$CONFIG_STATUS # Work around the forget-to-reset-the-flag bug. echo 't clr' >>$CONFIG_STATUS echo ': clr' >>$CONFIG_STATUS @@ -11304,41 +22473,46 @@ cat $tmp/in >>$tmp/config.h rm -f $tmp/in if test x"$ac_file" != x-; then - if cmp -s $ac_file $tmp/config.h 2>/dev/null; then + if diff $ac_file $tmp/config.h >/dev/null 2>&1; then { echo "$as_me:$LINENO: $ac_file is unchanged" >&5 echo "$as_me: $ac_file is unchanged" >&6;} else ac_dir=`(dirname "$ac_file") 2>/dev/null || $as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$ac_file" : 'X\(//\)[^/]' \| \ - X"$ac_file" : 'X\(//\)$' \| \ - X"$ac_file" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || + X"$ac_file" : 'X\(//\)[^/]' \| \ + X"$ac_file" : 'X\(//\)$' \| \ + X"$ac_file" : 'X\(/\)' \| \ + . : '\(.\)' 2>/dev/null || echo X"$ac_file" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } /^X\(\/\/\)[^/].*/{ s//\1/; q; } /^X\(\/\/\)$/{ s//\1/; q; } /^X\(\/\).*/{ s//\1/; q; } s/.*/./; q'` - { case "$ac_dir" in - [\\/]* | ?:[\\/]* ) as_incr_dir=;; - *) as_incr_dir=.;; -esac -as_dummy="$ac_dir" -for as_mkdir_dir in `IFS='/\\'; set X $as_dummy; shift; echo "$@"`; do - case $as_mkdir_dir in - # Skip DOS drivespec - ?:) as_incr_dir=$as_mkdir_dir ;; - *) - as_incr_dir=$as_incr_dir/$as_mkdir_dir - test -d "$as_incr_dir" || - mkdir "$as_incr_dir" || - { { echo "$as_me:$LINENO: error: cannot create \"$ac_dir\"" >&5 -echo "$as_me: error: cannot create \"$ac_dir\"" >&2;} - { (exit 1); exit 1; }; } - ;; - esac -done; } + { if $as_mkdir_p; then + mkdir -p "$ac_dir" + else + as_dir="$ac_dir" + as_dirs= + while test ! -d "$as_dir"; do + as_dirs="$as_dir $as_dirs" + as_dir=`(dirname "$as_dir") 2>/dev/null || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| \ + . : '\(.\)' 2>/dev/null || +echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } + /^X\(\/\/\)[^/].*/{ s//\1/; q; } + /^X\(\/\/\)$/{ s//\1/; q; } + /^X\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + done + test ! -n "$as_dirs" || mkdir $as_dirs + fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 +echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} + { (exit 1); exit 1; }; }; } rm -f $ac_file mv $tmp/config.h $ac_file @@ -11347,12 +22521,6 @@ cat $tmp/config.h rm -f $tmp/config.h fi - # Run the commands associated with the file. - case $ac_file in - config.h ) # update the timestamp -echo 'timestamp for config.h' >"./stamp-h1" - ;; - esac done _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF @@ -11365,16 +22533,41 @@ ac_source=`echo "$ac_file" | sed 's,[^:]*:,,'` ac_dir=`(dirname "$ac_dest") 2>/dev/null || $as_expr X"$ac_dest" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$ac_dest" : 'X\(//\)[^/]' \| \ - X"$ac_dest" : 'X\(//\)$' \| \ - X"$ac_dest" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || + X"$ac_dest" : 'X\(//\)[^/]' \| \ + X"$ac_dest" : 'X\(//\)$' \| \ + X"$ac_dest" : 'X\(/\)' \| \ + . : '\(.\)' 2>/dev/null || echo X"$ac_dest" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } /^X\(\/\/\)[^/].*/{ s//\1/; q; } /^X\(\/\/\)$/{ s//\1/; q; } /^X\(\/\).*/{ s//\1/; q; } s/.*/./; q'` + { if $as_mkdir_p; then + mkdir -p "$ac_dir" + else + as_dir="$ac_dir" + as_dirs= + while test ! -d "$as_dir"; do + as_dirs="$as_dir $as_dirs" + as_dir=`(dirname "$as_dir") 2>/dev/null || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| \ + . : '\(.\)' 2>/dev/null || +echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } + /^X\(\/\/\)[^/].*/{ s//\1/; q; } + /^X\(\/\/\)$/{ s//\1/; q; } + /^X\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + done + test ! -n "$as_dirs" || mkdir $as_dirs + fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 +echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} + { (exit 1); exit 1; }; }; } + ac_builddir=. if test "$ac_dir" != .; then @@ -11400,103 +22593,51 @@ ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix ac_top_srcdir=$ac_top_builddir$srcdir ;; esac -# Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be -# absolute. -ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd` -ac_abs_top_builddir=`cd "$ac_dir" && cd $ac_top_builddir && pwd` -ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd` -ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd` + +# Do not use `cd foo && pwd` to compute absolute paths, because +# the directories may not exist. +case `pwd` in +.) ac_abs_builddir="$ac_dir";; +*) + case "$ac_dir" in + .) ac_abs_builddir=`pwd`;; + [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; + *) ac_abs_builddir=`pwd`/"$ac_dir";; + esac;; +esac +case $ac_abs_builddir in +.) ac_abs_top_builddir=${ac_top_builddir}.;; +*) + case ${ac_top_builddir}. in + .) ac_abs_top_builddir=$ac_abs_builddir;; + [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; + *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; + esac;; +esac +case $ac_abs_builddir in +.) ac_abs_srcdir=$ac_srcdir;; +*) + case $ac_srcdir in + .) ac_abs_srcdir=$ac_abs_builddir;; + [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; + *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; + esac;; +esac +case $ac_abs_builddir in +.) ac_abs_top_srcdir=$ac_top_srcdir;; +*) + case $ac_top_srcdir in + .) ac_abs_top_srcdir=$ac_abs_builddir;; + [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; + *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; + esac;; +esac { echo "$as_me:$LINENO: executing $ac_dest commands" >&5 echo "$as_me: executing $ac_dest commands" >&6;} case $ac_dest in - depfiles ) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do - # Strip MF so we end up with the name of the file. - mf=`echo "$mf" | sed -e 's/:.*$//'` - # Check whether this is an Automake generated Makefile or not. - # We used to match only the files named `Makefile.in', but - # some people rename them; so instead we look at the file content. - # Grep'ing the first line is not enough: some people post-process - # each Makefile.in and add a new line on top of each file to say so. - # So let's grep whole file. - if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then - dirpart=`(dirname "$mf") 2>/dev/null || -$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$mf" : 'X\(//\)[^/]' \| \ - X"$mf" : 'X\(//\)$' \| \ - X"$mf" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || -echo X"$mf" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - else - continue - fi - grep '^DEP_FILES *= *[^ #]' < "$mf" > /dev/null || continue - # Extract the definition of DEP_FILES from the Makefile without - # running `make'. - DEPDIR=`sed -n -e '/^DEPDIR = / s///p' < "$mf"` - test -z "$DEPDIR" && continue - # When using ansi2knr, U may be empty or an underscore; expand it - U=`sed -n -e '/^U = / s///p' < "$mf"` - test -d "$dirpart/$DEPDIR" || mkdir "$dirpart/$DEPDIR" - # We invoke sed twice because it is the simplest approach to - # changing $(DEPDIR) to its actual value in the expansion. - for file in `sed -n -e ' - /^DEP_FILES = .*\\\\$/ { - s/^DEP_FILES = // - :loop - s/\\\\$// - p - n - /\\\\$/ b loop - p - } - /^DEP_FILES = / s/^DEP_FILES = //p' < "$mf" | \ - sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do - # Make sure the directory exists. - test -f "$dirpart/$file" && continue - fdir=`(dirname "$file") 2>/dev/null || -$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$file" : 'X\(//\)[^/]' \| \ - X"$file" : 'X\(//\)$' \| \ - X"$file" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || -echo X"$file" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - { case $dirpart/$fdir in - [\\/]* | ?:[\\/]* ) as_incr_dir=;; - *) as_incr_dir=.;; -esac -as_dummy=$dirpart/$fdir -for as_mkdir_dir in `IFS='/\\'; set X $as_dummy; shift; echo "$@"`; do - case $as_mkdir_dir in - # Skip DOS drivespec - ?:) as_incr_dir=$as_mkdir_dir ;; - *) - as_incr_dir=$as_incr_dir/$as_mkdir_dir - test -d "$as_incr_dir" || - mkdir "$as_incr_dir" || - { { echo "$as_me:$LINENO: error: cannot create $dirpart/$fdir" >&5 -echo "$as_me: error: cannot create $dirpart/$fdir" >&2;} - { (exit 1); exit 1; }; } - ;; - esac -done; } - - # echo "creating $dirpart/$file" - echo '# dummy' > "$dirpart/$file" - done -done - ;; + default-1 ) test -z "$CONFIG_HEADERS" || echo timestamp > stamp-h ;; esac done _ACEOF @@ -11519,8 +22660,11 @@ # need to make the FD available again. if test "$no_create" != yes; then ac_cs_success=: + ac_config_status_args= + test "$silent" = yes && + ac_config_status_args="$ac_config_status_args --quiet" exec 5>/dev/null - $SHELL $CONFIG_STATUS || ac_cs_success=false + $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false exec 5>>config.log # Use ||, not &&, to avoid exiting from the if with $? = 1, which # would make configure fail if this is the last instruction. --- tse3-0.2.7.orig/configure.in +++ tse3-0.2.7/configure.in @@ -49,7 +49,7 @@ # Library creation AM_ENABLE_SHARED -AM_DISABLE_STATIC +AM_ENABLE_STATIC AM_PROG_LIBTOOL AC_SUBST(LIBTOOL_DEPS)