--- qla-tools-0.20090725.orig/Makefile
+++ qla-tools-0.20090725/Makefile
@@ -0,0 +1,38 @@
+TARS=$(shell ls ql-set-cmd-timeout-*.tgz \
+             ql-hba-snapshot-*.tgz       \
+             ql-lun-state-online-*.tgz   \
+             ql-dynamic-tgt-lun-disc-*.tgz)
+DIRS=$(patsubst %.tgz,%,$(TARS))
+
+SCRIPTS=$(shell find . -name '*.sh')
+
+all: $(DIRS)
+
+%: %.tgz
+	tar zxf $<
+
+install: $(SCRIPTS)
+	for SCRIPT in $(SCRIPTS); do \
+	    cp $$SCRIPT $(DESTDIR)/usr/sbin/`basename $$SCRIPT .sh`; \
+	done
+
+clean:
+	rm -rf $(DIRS)
+
+
+# This target is called by hand to create the basic manpages. Due the use of
+# escape sequences in the scripts some handwork in the manpages is needed.
+manpages: $(SCRIPTS)
+	for SCRIPT in $(SCRIPTS); do \
+	    help2man --version-option -h -N ./$$SCRIPT > /tmp/`basename $$SCRIPT .sh`.8 ; \
+	done
+
+QL_DYN_TGT_VERSION=$(shell ls ql-dynamic-tgt-lun-disc-*.tgz| sed 's/ql-dynamic-tgt-lun-disc-\(.*\).tgz/\1/')
+
+repack: clean $(DIRS)
+	mv ql-dynamic-tgt-lun-disc-$(QL_DYN_TGT_VERSION) ql-dynamic-tgt-lun-disc-repacked-$(QL_DYN_TGT_VERSION)
+	rm ql-dynamic-tgt-lun-disc-repacked-$(QL_DYN_TGT_VERSION)/sg3_utils-*.tgz
+	tar --exclude=*.tgz -zcf ql-dynamic-tgt-lun-disc-repacked-$(QL_DYN_TGT_VERSION).tgz ql-dynamic-tgt-lun-disc-repacked-*
+	$(MAKE) clean
+
+.PHONY: clean
--- qla-tools-0.20090725.orig/debian/ql-hba-snapshot.8
+++ qla-tools-0.20090725/debian/ql-hba-snapshot.8
@@ -0,0 +1,70 @@
+.TH "ql-hba-snapshot" "8" "July 2009" "Matthias Schmitz <matthias@sigxcpu.org>" "System Administration"
+.SH "NAME"
+ql\-hba\-snapshot \- display specific information of the QLogic HBA.
+.SH "SYNOPSIS"
+.B ql\-hba\-snapshot
+<Host number> [\fIOPTIONS\fR]
+.SH "DESCRIPTION"
+FC HBA Snapshot Utility
+
+This utility displays the details of the QLogic HBA attached to the
+system. It uses one of the two file systems for scanning: proc or
+sysfs.
+
+<Host number> | <\-a/\-\-all> [optional]
+.IP 
+Provide the <HOST NUMBER> to display the detailed
+information of the HBA.
+With no option specified, general information of all
+hosts will be displayed.
+Ex.
+# /usr/sbin/ql\-hba\-snapshot <Host Number>
+# /usr/sbin/ql\-hba\-snapshot \fB\-\-procfs\fR <Host Number> (For procfs)
+.PP 
+\fB\-h\fR, \fB\-\-help\fR
+.IP 
+Prints the help message.
+Ex.
+# /usr/sbin/ql\-hba\-snapshot \fB\-\-help\fR
+.PP 
+\fB\-hl\fR, \fB\-\-hostlist\fR
+.IP 
+This option displays the list of QLogic hosts (HBAs)
+connected to this system.
+The <HOST NUMBER> can be obtained by using following command
+Ex.
+# /usr/sbin/ql\-hba\-snapshot \fB\-\-hostlist\fR
+.PP 
+\fB\-p\fR, \fB\-\-parameters\fR
+.IP 
+This option displays the command line parameters that
+can be passed to the QLogic HBA driver.
+Ex.
+# /usr/sbin/ql\-hba\-snapshot \fB\-\-parameters\fR <Host Number>
+.PP 
+\fB\-s\fR, \fB\-\-statistics\fR
+.IP 
+This option displays the statistical information for
+specified host. Stastics option is only supported in
+"sysfs" based scan.
+Ex.
+# /usr/sbin/ql\-hba\-snapshot \fB\-\-statistics\fR <Host number/\-\-all>
+.PP 
+\fB\-proc\fR, \fB\-\-procfs\fR
+.IP 
+This options forces the the utility to scans information
+based on "procfs", instead of default sysfs.
+Ex.
+# /usr/sbin/ql\-hba\-snapshot \fB\-\-procfs\fR [Other valid option]
+.PP 
+\fB\-v\fR, \fB\-\-verbose\fR
+.IP 
+This enables verbose display. The detailed information
+of LUNs will be displayed in addition to standard one.
+This option is only supported in sysfs.
+Ex.
+# /usr/sbin/ql\-hba\-snapshot \fB\-\-verbose\fR <Host number/\-a>
+.PP 
+
+.SH "SEE ALSO"
+ql\-dynamic\-tgt\-lun\-disc(8), ql\-lun\-state\-online(8), ql\-set\-cmd\-timeout(8)
--- qla-tools-0.20090725.orig/debian/copyright
+++ qla-tools-0.20090725/debian/copyright
@@ -0,0 +1,40 @@
+This package was debianized by:
+
+     Matthias Schmitz <matthias@sigxcpu.org> Tue, 28 Jul 2009 13:35:57 +0200
+
+It was downloaded from:
+
+    http://driverdownloads.qlogic.com/QLogicDriverDownloads_UI/SearchByProduct.aspx?ProductCategory=39&Product=936&Os=26
+
+Upstream Author:
+
+    QLogic Corp. <support@qlogic.com>
+
+Copyright:
+
+    Copyright (C) 2008 QLogic Corp.
+
+License:
+
+   This package is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License version 2 as
+   published by the Free Software Foundation.
+
+    This package is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this package; if not, write to the Free Software
+    Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+
+On Debian systems, the complete text of the GNU General
+Public License version 2 can be found in `/usr/share/common-licenses/GPL-2'.
+
+The Debian packaging is:
+
+    Copyright (C) 2009 Matthias Schmitz <matthias@sigxcpu.org>
+
+and is licensed under the GPL version 3,
+see `/usr/share/common-licenses/GPL-3'.
--- qla-tools-0.20090725.orig/debian/dirs
+++ qla-tools-0.20090725/debian/dirs
@@ -0,0 +1 @@
+usr/sbin
--- qla-tools-0.20090725.orig/debian/README.Source
+++ qla-tools-0.20090725/debian/README.Source
@@ -0,0 +1,14 @@
+qla-tools for Debian - source package notes
+-----------------------------------------------------
+
+Go to http://www.qlogic.com, klick on Support. Choose Fibre Channel HBAs ->
+Drivers, Software and Manuals. In the opening popup window select Fibre Channel
+Adapters->QLA2460->Linux Red Hat (32-bit). Download all files under Linux
+Tools, except 'HBA Collect Utility'
+
+The upstream tarball of ql-dynamic-tgt-lun-disc was repacked as followd:
+
+  - remove sg3_utils-[version].tgz because it's still in Debian and licenced under BSD
+  - added -repacked in tarball file name
+
+ -- Christoph Goehre <christoph.goehre@gmx.de>  Tue, 28 Jul 2009 15:08:59 +0200
--- qla-tools-0.20090725.orig/debian/docs
+++ qla-tools-0.20090725/debian/docs
@@ -0,0 +1 @@
+*/*.txt
--- qla-tools-0.20090725.orig/debian/changelog
+++ qla-tools-0.20090725/debian/changelog
@@ -0,0 +1,27 @@
+qla-tools (0.20090725-1) unstable; urgency=low
+
+  * New Upstream Version
+  * close ITP (Closes: #495305)
+
+  [ Guido Günther ]
+  * [2aeacf0] Makefile: autodetect version of tgzs
+
+  [ Matthias Schmitz ]
+  * [6c22ce6] update manpage ql-dynamic-tgt-lun-disc.8
+  * [a07cb92] update manpage ql-hba-snapshot.8
+  * [3dcff5d] make lintian happy
+
+  [ Christoph Goehre ]
+  * [0b29991] change copyright holder of all man pages to Matthias
+  * [21655b4] README.Debian: rewrap to long text lines
+  * [c447548] document repack process of ql-dynamic-tgt-lun-disc upstream
+  * [1d6f2e2] clarification about upstream licence
+  * [6530a11] calm lintian again
+
+ -- Christoph Goehre <christoph.goehre@gmx.de>  Wed, 29 Jul 2009 13:16:49 +0200
+
+qla-tools (0.20080815-1) unstable; urgency=low
+
+  * Initial release (Closes: #495305).
+
+ -- Matthias Schmitz <matthias@sigxcpu.org>  Fri, 15 Aug 2008 23:13:33 +0200
--- qla-tools-0.20090725.orig/debian/rules
+++ qla-tools-0.20090725/debian/rules
@@ -0,0 +1,85 @@
+#!/usr/bin/make -f
+# -*- makefile -*-
+# Sample debian/rules that uses debhelper.
+# This file was originally written by Joey Hess and Craig Small.
+# As a special exception, when this file is copied by dh-make into a
+# dh-make output file, you may use that output file without restriction.
+# This special exception was added by Craig Small in version 0.37 of dh-make.
+
+# Uncomment this to turn on verbose mode.
+#export DH_VERBOSE=1
+
+
+
+
+CFLAGS = -Wall -g
+
+ifneq (,$(findstring noopt,$(DEB_BUILD_OPTIONS)))
+	CFLAGS += -O0
+else
+	CFLAGS += -O2
+endif
+
+configure: configure-stamp
+configure-stamp:
+	dh_testdir
+	# Add here commands to configure the package.
+
+	touch configure-stamp
+
+
+build: build-stamp
+
+build-stamp: configure-stamp
+	dh_testdir
+
+	# Add here commands to compile the package.
+	$(MAKE)
+	#docbook-to-man debian/qla-tools.sgml > qla-tools.1
+
+	touch build-stamp
+
+clean:
+	dh_testdir
+	dh_testroot
+	rm -f build-stamp configure-stamp
+
+	# Add here commands to clean up after the build process.
+	$(MAKE) clean
+
+	dh_clean
+
+install: build
+	dh_testdir
+	dh_testroot
+	dh_prep
+	dh_installdirs
+
+	# Add here commands to install the package into debian/qla-tools.
+	$(MAKE) install DESTDIR=$(CURDIR)/debian/qla-tools
+
+
+# Build architecture-independent files here.
+binary-indep: build install
+# We have nothing to do by default.
+	dh_testdir
+	dh_testroot
+	dh_installchangelogs
+	dh_installdocs
+	dh_installexamples
+	dh_installman debian/ql-hba-snapshot.8 debian/ql-set-cmd-timeout.8 debian/ql-dynamic-tgt-lun-disc.8 debian/ql-lun-state-online.8
+	dh_link
+	dh_strip
+	dh_compress
+	dh_fixperms
+	dh_installdeb
+	dh_gencontrol
+	dh_md5sums
+	dh_builddeb
+
+# Build architecture-dependent files here.
+binary-arch: build install
+
+
+binary: binary-indep binary-arch
+.PHONY: build clean binary-indep binary-arch binary install configure
--- qla-tools-0.20090725.orig/debian/compat
+++ qla-tools-0.20090725/debian/compat
@@ -0,0 +1 @@
+7
--- qla-tools-0.20090725.orig/debian/README.Debian
+++ qla-tools-0.20090725/debian/README.Debian
@@ -0,0 +1,20 @@
+qla-tools for Debian
+-----------------------
+QLogic provides a bunch of linux tools for handling their HBAs on its website.
+Unfortunaly they support only RedHat and Novell SLES so we need to package the
+tools for ourself.
+
+Snapshot -- HBA/Target/LUN (ql-hba-snapshot)
+Works on sysfs to display details about the QLogic HBA attached to the system.
+
+Set Device Command Timeout Value (ql-set-cmd-timeout)
+Allows you to set the timeout on the devices connected to the QLogic FC HBA.
+
+Dynamic Target and LUN Discovery (ql-dynamic-tgt-lun-disc)
+Scans for newly added LUNs.
+
+LUN Transition -- Offline to Online (ql-lun-state-online)
+Allows you to change the state of LUNs connected to QLogic HBA from offline to
+online/running.
+
+ -- Matthias Schmitz <matthias@sigxcpu.org>  Fri, 15 Aug 2008 23:33:33 +0200
--- qla-tools-0.20090725.orig/debian/ql-dynamic-tgt-lun-disc.8
+++ qla-tools-0.20090725/debian/ql-dynamic-tgt-lun-disc.8
@@ -0,0 +1,58 @@
+.TH "ql-dynamic-tgt-disc" "8" "July 2009" "Matthias Schmitz <matthias@sigxcpu.org>" "System Administration"
+.SH "NAME"
+ql\-dynamic\-tgt\-lun\-disc \- Scans for newly added LUNs.
+
+.SH "SYNOPSIS"
+.B ql\-dynamic\-tgt\-lun\-disc
+[\fIOPTIONS\fR]
+.SH "DESCRIPTION"
+Dynamic TGT\-LUN Discovery Utility
+
+This utility scans for newly added LUNs. After adding new LUNs, you
+do not need to unload, then load the QLogic FC driver or reboot the
+system
+.PP 
+To begin scanning the LUNs issue following command:
+.IP 
+# /usr/sbin/ql\-dynamic\-tgt\-lun\-disc
+.TP 
+\fB\-al\fR,   \fB\-\-allow\-lip\fR
+LIP is not issued by default, even if it is required for scanning new LUNs
+Setting this option, allows the utility to issue LIP.
+.TP 
+\fB\-cl\fR, \fB\-\-current\-luns\fR
+Displays LUNS currently present
+.TP 
+\fB\-e\fR,  \fB\-\-extended\-scan\fR
+Use this option as "\-e | \fB\-\-extended\-scan\fR". to rescan
+LUNs. This will identify any change in attributes of
+existing LUNs. This option can be used in combination
+of scan/refresh or max luns
+.TP 
+\fB\-h\fR,  \fB\-\-help\fR, ?
+Prints this help message
+.TP 
+\fB\-i\fR,  \fB\-\-interactive\fR
+Use this option to use the menu driven program
+.TP 
+\fB\-is\fR,  \fB\-\-iscsi\fR
+Use this option to operate on ISCSI HBAs, this option can
+be used in combination of any other supported option.
+.TP 
+\fB\-m\fR,  \fB\-\-max\-lun\fR
+To set the maximum LUNs to be scanned
+.TP 
+\fB\-p\fR,  \fB\-\-proc\fR
+Use PROC file system for LUN scanning
+.TP 
+\fB\-r\fR,  \fB\-\-refresh\fR
+To refresh, that is remove LUNs that are lost
+use the options "\-r|\-\-refresh". This will
+remove the LUNs which no more exist.
+.TP 
+\fB\-s\fR,  \fB\-\-scan\fR [ \fB\-r\fR|\-\-refresh ]
+The QLogic LUN scan utility re\-scans all the
+devices connected to the QLogic HBA
+.PP 
+.SH "SEE ALSO"
+ql\-lun\-state\-online(8), ql\-hba\-snapshot(8), ql\-set\-cmd\-timeout(8)
--- qla-tools-0.20090725.orig/debian/ql-lun-state-online.8
+++ qla-tools-0.20090725/debian/ql-lun-state-online.8
@@ -0,0 +1,38 @@
+.TH "ql-lun-state-online" "8" "August 2008" "Matthias Schmitz <matthias@sigxcpu.org>" "System Administration"
+.SH "NAME"
+ql\-lun\-state\-online \-  scans for all offline LUNs and enables them.
+.SH "SYNOPSIS"
+.B ql\-lun\-state\-online
+[\fIOPTIONS\fR]
+.SH "DESCRIPTION"
+QLogic Linux LUN STATE Change Utility
+
+This utility allows you to change the state of LUNs connected to a
+QLogic HBA from offline to online/running. The SCSI mid\-layer may
+change a device's state to offline when it does not receive a response
+from the device. Once these devices are offline, the SCSI mid\-layer
+ignores them
+.PP 
+OPTIONS :
+.IP 
+HOST NUMBER/S
+.IP 
+The QLogic LUN STATE change utility
+scans for all offline LUNs on the
+Specified HOSTS and enables them
+.HP
+\fB\-a\fR,  \fB\-\-all\fR
+.IP 
+The QLogic LUN STATE change utility
+enables all disabled LUNS
+.HP
+\fB\-i\fR,  \fB\-\-interactive\fR
+.IP 
+Use this option to use the menu driven program
+.HP
+\fB\-h\fR,  \fB\-\-help\fR, ?
+.IP 
+Prints this help message
+.PP 
+.SH "SEE ALSO"
+ql\-dynamic\-tgt\-lun\-disc(8), ql\-hba\-snapshot(8), ql\-set\-cmd\-timeout(8)
--- qla-tools-0.20090725.orig/debian/control
+++ qla-tools-0.20090725/debian/control
@@ -0,0 +1,19 @@
+Source: qla-tools
+Section: admin
+Priority: optional
+Maintainer: Christoph Goehre <christoph.goehre@gmx.de>
+Build-Depends: debhelper (>= 7.0.0)
+DM-Upload-Allowed: yes
+Standards-Version: 3.8.2
+Homepage: http://driverdownloads.qlogic.com/QLogicDriverDownloads_UI/SearchByProduct.aspx?ProductCategory=39&Product=936&Os=26
+
+Package: qla-tools
+Architecture: all
+Depends: ${shlibs:Depends}, ${misc:Depends}
+Description: QLogic Linux tools for work with QLogic HBAs
+ QLogic provides some tools that makes LUN handling (add / remove) and
+ adminstration of QLogic HBAs much easier.  You can scan for newly added LUNs,
+ display details about the QLogic HBA attached to the system, change the state
+ of LUNs from offline to online/running and set the timeout on the devices
+ connected to the QLogic FC HBA.
+
--- qla-tools-0.20090725.orig/debian/ql-set-cmd-timeout.8
+++ qla-tools-0.20090725/debian/ql-set-cmd-timeout.8
@@ -0,0 +1,40 @@
+.TH "ql-set-cmd-timeout" "8" "August 2008" "Matthias Schmitz <matthias@sigxcpu.org>" "System Administration"
+.SH "NAME"
+ql\-set\-cmd\-timeout \- set the timeout on the devices connected to the QLogic FC HBA.
+.SH "SYNOPSIS"
+.B ql\-set\-cmd\-timeout
+[\fIOPTIONS\fR]
+.SH "DESCRIPTION"
+QLogic Linux Set Device Timeout Utility
+
+This utility allows you to set the timeout on the devices connected to
+the QLogic FC HBA.
+This timeout value applies to the commands sent to the device. This
+can help when target devices take longer to execute a command, for
+example under heavy I/O. Setting a longer timeout reduces the chance
+of the Linux SCSI mid\-layer driver aborting the tasks after a timeout.
+.IP 
+[DEFAULT]
+.IP 
+Display timeout of devices connected to all HOSTs
+.IP 
+[HOST]
+.IP 
+Display timeout of devices connected to HOST
+.IP 
+[HOST] [TARGET]
+.IP 
+Display timeout of devices connected to a TARGET on HOST
+.IP 
+[HOST] [TARGET] [TIMEOUT]
+.IP 
+To set timeout on devices connected to a TARGET on HOST
+.TP 
+\fB\-h\fR,  \fB\-\-help\fR, ?
+Prints this help message
+.TP 
+\fB\-i\fR,  \fB\-\-interactive\fR
+Use this option to use the menu driven program
+.SH "SEE ALSO"
+ql\-dynamic\-tgt\-lun\-disc(8), ql\-lun\-state\-online(8), ql\-hba\-snapshot(8)
+