--- jnettop-0.11.0.orig/README +++ jnettop-0.11.0/README @@ -23,10 +23,11 @@ (What is it?) Aggregation is a way, how to modify packet classicication rules. There are -two types of aggregation in jnettop: host and port. If there is port -aggregation enabled, it means, that all packets seem to come(go to) same port -numbers. If there is host aggregation enabled, it means, that all packets -seem to come(go to) same host. Let's have an example: +two types of aggregation in jnettop: host, port, and host+port. If there +is port aggregation enabled, it means, that all packets seem to come(go +to) same port numbers. If there is host aggregation enabled, it means, +that all packets seem to come(go to) same host. If host+port +aggregation is enabled, it aggregates both. Let's have an example: Suppose we have following configuration: +--- host0 @@ -36,14 +37,14 @@ i.e. typical border router with eth0 interface looking into internet and eth1 interface looking to intranet. Suppose we're running jnettop on router sniffing on interface eth0. To see how many bytes every host consumes out -of the internet connection, we enable remote host aggregation and local port -aggregation. i.e. All internet will behave as one endpoint and all programs -on one host will, too, behave as one endpoint. This way, every stream we see -in jnettop will be from one of the hosts in intranet to a public internet. -Aggregation is very powerfull laser-knife in network traffic analysis. -I understand, that it is not very user friendly implementation in jnettop and -I will gratefully welcome every suggestion on how to make this topic clear and -more clear-to-use. +of the internet connection, we enable remote host+port aggregation and +local port aggregation. i.e. All internet will behave as one endpoint +and all programs on one host will, too, behave as one endpoint. This +way, every stream we see in jnettop will be from one of the hosts in +intranet to a public internet. Aggregation is very powerfull laser-knife +in network traffic analysis. I understand, that it is not very user +friendly implementation in jnettop and I will gratefully welcome every +suggestion on how to make this topic clear and more clear-to-use. -- .jnettop configuration file -- @@ -90,14 +91,14 @@ Since version 0.9, jnettop supports following new keywors: - local_aggregation [none|host|port] + local_aggregation [none|host|port|host+port] this keyword sets startup local aggregation value ex. local_aggregation port - remote_aggregation [none|host|port] + remote_aggregation [none|host|port|host+port] this keyword sets startup remote aggregation value ex. --- jnettop-0.11.0.orig/jnettop.c +++ jnettop-0.11.0/jnettop.c @@ -124,7 +124,7 @@ attrset(A_NORMAL); mvprintw(0, 0, "run XXX:XX:XX device XXXXXXXXXX pkt[f]ilter: XXXXXXXXXXXXXXXXXXXXXXXXXXXXX"); - mvprintw(1, 0, "[c]ntfilter: XXX [b]ps=XXXXXXX [l]ocal aggr.: XXXX [r]emote aggr.: XXXX "); + mvprintw(1, 0, "[c]ntfilter: XXX [b]ps=XXXXXXX [l]ocal aggr.: XXXX [r]emote aggr.: XXXX "); mvprintw(0, activeColumns-1, "."); { @@ -178,8 +178,8 @@ mvprintw(0, 45, "%-29.29s", jconfig_GetSelectedBpfFilterName()); mvprintw(1, 13, "%s", jprocessor_ContentFiltering?"on ":"off"); mvprintw(1, 23, "%s", onoffPackets ? "pckts/s" : (onoffBitValues?"bits/s ":"bytes/s")); - mvprintw(1, 46, "%s", JBASE_AGGREGATION[jprocessor_LocalAggregation]); - mvprintw(1, 67, "%s", JBASE_AGGREGATION[jprocessor_RemoteAggregation]); + mvprintw(1, 46, "%-9s", JBASE_AGGREGATION[jprocessor_LocalAggregation]); + mvprintw(1, 71, "%-9s", JBASE_AGGREGATION[jprocessor_RemoteAggregation]); attroff(A_BOLD); @@ -380,10 +380,10 @@ displayMode = DISPLAYMODE_HELP; break; case 'l': - jprocessor_SetLocalAggregation((jprocessor_LocalAggregation + 1) % 3); + jprocessor_SetLocalAggregation((jprocessor_LocalAggregation + 1) % 4); break; case 'r': - jprocessor_SetRemoteAggregation((jprocessor_RemoteAggregation + 1) % 3); + jprocessor_SetRemoteAggregation((jprocessor_RemoteAggregation + 1) % 4); break; case '0': case '1': @@ -487,15 +487,15 @@ " -d, --debug filename write debug information into file\n" " -f, --config-file name reads configuration from file. defaults to ~/.jnettop\n" " -i, --interface name capture packets on specified interface\n" - " --local-aggr arg set local aggregation to none/host/port\n" + " --local-aggr arg set local aggregation to none/host/port/host+port\n" " -n, --no-resolver disable resolving of addresses\n" " -p, --promiscuous enable promisc mode on the devices\n" - " --remote-aggr arg set remote aggregation to none/host/port\n" + " --remote-aggr arg set remote aggregation to none/host/port/host+port\n" " -s, --select-rule rule selects one of the rules defined in config file\n" - " by it's name\n" + " by its name\n" " -x, --filter rule allows for specification of custom filtering rule\n" " this follows tcpdump(1) syntax. don't forget to\n" - " enclose the filter into quotes when running from shell\n" + " enclose the filter in quotes when running from shell\n" "\n" "Report bugs to \n"); exit(0); --- jnettop-0.11.0.orig/jconfig.c +++ jnettop-0.11.0/jconfig.c @@ -113,6 +113,10 @@ } s = g_scanner_new(NULL); + /* Add + to accepted identifier characters: */ + s->config->cset_identifier_nth = g_strjoin(NULL, + s->config->cset_identifier_nth, "+", NULL); + g_scanner_input_file(s, fileno(f)); while (!g_scanner_eof(s)) { GTokenType tt; @@ -209,7 +213,7 @@ if (!g_ascii_strcasecmp(s->value.v_identifier, "local_aggregation")) { int val = parse_aggregation(s); if (val == AGG_UNKNOWN) { - fprintf(stderr, "Parse error on line %d: expecting none or host or port.\n", line); + fprintf(stderr, "Parse error on line %d: expecting none, host, port, or host+port.\n", line); return FALSE; } if (jconfig_Settings.localAggregation == AGG_UNKNOWN) --- jnettop-0.11.0.orig/jutil.c +++ jnettop-0.11.0/jutil.c @@ -78,15 +78,16 @@ } guint jutil_ParseAggregation(const char *agg) { - if (strcmp(agg, "none") && strcmp(agg,"host") && strcmp(agg,"port")) { + if (strcmp(agg, "none") == 0) + return AGG_NONE; + else if (strcmp(agg,"host") == 0) + return AGG_HOST; + else if (strcmp(agg,"port") == 0) + return AGG_PORT; + else if (strcmp(agg,"host+port") == 0) + return AGG_BOTH; + else return AGG_UNKNOWN; - } - switch (*agg) { - case 'n': return AGG_NONE; - case 'h': return AGG_HOST; - case 'p': return AGG_PORT; - } - return AGG_UNKNOWN; } void memand(char *buf1, const char *buf2, int length) { --- jnettop-0.11.0.orig/jprocessor.c +++ jnettop-0.11.0/jprocessor.c @@ -211,14 +211,26 @@ switch (jprocessor_LocalAggregation) { case AGG_HOST: setToHostAggregation(JBASE_AF(stream->proto), &stream->src); + break; case AGG_PORT: stream->srcport = -1; + break; + case AGG_BOTH: + setToHostAggregation(JBASE_AF(stream->proto), &stream->src); + stream->srcport = -1; + break; } switch (jprocessor_RemoteAggregation) { case AGG_HOST: setToHostAggregation(JBASE_AF(stream->proto), &stream->dst); + break; case AGG_PORT: stream->dstport = -1; + break; + case AGG_BOTH: + setToHostAggregation(JBASE_AF(stream->proto), &stream->src); + stream->srcport = -1; + break; } } --- jnettop-0.11.0.orig/jbase.c +++ jnettop-0.11.0/jbase.c @@ -26,5 +26,5 @@ gchar *JBASE_PROTOCOLS[] = { "UNK.", "IP", "TCP", "UDP", "ARP", "ETHER", "SLL", "AGGR.", "ICMP", "IP6", "TCP6", "UDP6", "ICMP6" }; -gchar *JBASE_AGGREGATION[] = { "none", "port", "host" }; +gchar *JBASE_AGGREGATION[] = { "none", "port", "host", "host+port" }; --- jnettop-0.11.0.orig/jbase.h +++ jnettop-0.11.0/jbase.h @@ -207,12 +207,11 @@ #define JBASE_AF_SIZE(a) (a == AF_INET6 ? sizeof(struct in6_addr) : sizeof(struct in_addr)) -extern gchar *JBASE_PROTOCOLS[]; - #define AGG_UNKNOWN (-1) #define AGG_NONE 0 #define AGG_PORT 1 #define AGG_HOST 2 +#define AGG_BOTH 3 extern gchar *JBASE_PROTOCOLS[]; extern gchar *JBASE_AGGREGATION[]; --- jnettop-0.11.0.orig/jnettop.8 +++ jnettop-0.11.0/jnettop.8 @@ -51,12 +51,11 @@ .TP .B \-f, \-\-config-file filename reads configuration from filename. defaults to ~/.jnettop. an example can be found at /usr/share/doc/jnettop/dot.jnettop. -or in .jnettop file from original distribution package. .TP .B \-i, \-\-interface name capture packets on specified interface .TP -.B \-\-local-aggr [none|host|port] +.B \-\-local-aggr [none|host|port|host+port] set local aggregation to specified value .TP .B \-n, \-\-no-resolver @@ -65,7 +64,7 @@ .B \-p, \-\-promiscuous enables promiscuous mode on the sniffed interface .TP -.B \-\-remote-aggr [none|host|port] +.B \-\-remote-aggr [none|host|port|host+port] set remote aggregation to specified value .TP .B \-s, \-\-select-rule name @@ -87,8 +86,8 @@ interface "eth0" .RE .TP -\fBlocal_aggregation [none|host|port]\fR -The \fBlocal_aggregation\fP keyword specifies initial active local aggregation. Valid values are \fBnone\fP, \fBhost\fP and \fBport\fP. Example: +\fBlocal_aggregation [none|host|port|host+port]\fR +The \fBlocal_aggregation\fP keyword specifies initial active local aggregation. Valid values are \fBnone\fP, \fBhost\fP, \fBport\fP, and \fBhost+port\fP. Example: .RS .PP local_aggregation host @@ -101,8 +100,8 @@ promisc on .RE .TP -\fBremote_aggregation [none|host|port]\fR -The \fBremote_aggregation\fP keyword specifies initial active remote aggregation. Valid values are \fBnone\fP, \fBhost\fP and \fBport\fP. Example: +\fBremote_aggregation [none|host|port|host+port]\fR +The \fBremote_aggregation\fP keyword specifies initial active remote aggregation. Valid values are \fBnone\fP, \fBhost\fP, \fBport\fP, and \fBhost+port\fP. Example: .RS .PP remote_aggregation port --- jnettop-0.11.0.orig/debian/changelog +++ jnettop-0.11.0/debian/changelog @@ -0,0 +1,67 @@ +jnettop (0.11.0-1) unstable; urgency=low + + * New upstream release + + -- Ari Pollak Sun, 3 Jul 2005 13:02:32 -0400 + +jnettop (0.10.1-1) unstable; urgency=low + + * New upstream release + * Added host+port options to man page + * jnettop.c: Fixed parsing of host+port config file option by + adding '+' to list of allowed config identifiers + (Thanks to Henrik Riomar for providing an initial fix) + + -- Ari Pollak Mon, 29 Nov 2004 12:20:00 -0500 + +jnettop (0.9-3) unstable; urgency=low + + * Add a new host+port aggregation option, and correct README to + reflect this. Hopefully this should clear up the documented behavior + while still allowing host-only aggregation. And hopefully I got + it right this time. (Closes: #250032) + + -- Ari Pollak Thu, 3 Jun 2004 12:43:16 -0400 + +jnettop (0.9-2) unstable; urgency=low + + * Apply fix for host aggregation (Closes: #250032) + * Move jnettop to /usr/sbin, this is really only useful when run as root + + -- Ari Pollak Thu, 20 May 2004 11:35:50 -0400 + +jnettop (0.9-1) unstable; urgency=low + + * New upstream release + + -- Ari Pollak Wed, 30 Jul 2003 17:24:15 -0400 + +jnettop (0.8.1-1) unstable; urgency=low + + * Change location of homepage + * Add watch file + * Add menu entry, since upstream now includes an interface parameter + (Closes: #18202) + * Man page is now included upstream + * Use debian/compat + + -- Ari Pollak Tue, 29 Apr 2003 00:48:48 -0400 + +jnettop (0.7-4) unstable; urgency=low + + * Add libpcap-dev to build-depends + + -- Ari Pollak Fri, 21 Feb 2003 19:33:50 -0500 + +jnettop (0.7-2) unstable; urgency=low + + * Add libncurses5-dev to build-depends (Closes: #181965) + + -- Ari Pollak Fri, 21 Feb 2003 17:07:38 -0500 + +jnettop (0.7-1) unstable; urgency=low + + * Initial Release. (Closes: #181533) + + -- Ari Pollak Tue, 18 Feb 2003 15:00:38 -0500 + --- jnettop-0.11.0.orig/debian/rules +++ jnettop-0.11.0/debian/rules @@ -0,0 +1,108 @@ +#!/usr/bin/make -f +# Sample debian/rules that uses debhelper. +# GNU copyright 1997 to 1999 by Joey Hess. + +# Uncomment this to turn on verbose mode. +#export DH_VERBOSE=1 + + +# These are used for cross-compiling and for saving the configure script +# from having to guess our platform (since we know it already) +DEB_HOST_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_HOST_GNU_TYPE) +DEB_BUILD_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_BUILD_GNU_TYPE) + + +CFLAGS = -Wall -g + +ifneq (,$(findstring noopt,$(DEB_BUILD_OPTIONS))) + CFLAGS += -O0 +else + CFLAGS += -O2 +endif +ifeq (,$(findstring nostrip,$(DEB_BUILD_OPTIONS))) + INSTALL_PROGRAM += -s +endif + +config.status: configure + dh_testdir + # Add here commands to configure the package. + ./configure --host=$(DEB_HOST_GNU_TYPE) --build=$(DEB_BUILD_GNU_TYPE) --prefix=/usr --mandir=\$${prefix}/share/man --infodir=\$${prefix}/share/info + + +build: build-stamp + +build-stamp: config.status + dh_testdir + + # Add here commands to compile the package. + $(MAKE) + #/usr/bin/docbook-to-man debian/jnettop.sgml > jnettop.1 + + touch build-stamp + +clean: + dh_testdir + dh_testroot + rm -f build-stamp + + # Add here commands to clean up after the build process. + -$(MAKE) distclean +ifneq "$(wildcard /usr/share/misc/config.sub)" "" + cp -f /usr/share/misc/config.sub config.sub +endif +ifneq "$(wildcard /usr/share/misc/config.guess)" "" + cp -f /usr/share/misc/config.guess config.guess +endif + + + dh_clean + +install: build + dh_testdir + dh_testroot + dh_clean -k + dh_installdirs + + # Add here commands to install the package into debian/jnettop. + $(MAKE) install prefix=$(CURDIR)/debian/jnettop/usr + mv $(CURDIR)/debian/jnettop/usr/bin $(CURDIR)/debian/jnettop/usr/sbin + install -D $(CURDIR)/.jnettop \ + $(CURDIR)/debian/jnettop/usr/share/doc/jnettop/dot.jnettop + + +# Build architecture-independent files here. +binary-indep: build install +# We have nothing to do by default. + +# Build architecture-dependent files here. +binary-arch: build install + dh_testdir + dh_testroot +# dh_installdebconf + dh_installdocs + dh_installexamples + dh_installmenu +# dh_installlogrotate +# dh_installemacsen +# dh_installpam +# dh_installmime +# dh_installinit + dh_installcron + dh_installman + dh_installinfo +# dh_undocumented + dh_installchangelogs ChangeLog + dh_link + dh_strip + dh_compress + dh_fixperms +# dh_makeshlibs + dh_installdeb +# dh_perl + dh_shlibdeps + dh_gencontrol + dh_md5sums + dh_builddeb + +binary: binary-indep binary-arch +.PHONY: build clean binary-indep binary-arch binary install --- jnettop-0.11.0.orig/debian/menu +++ jnettop-0.11.0/debian/menu @@ -0,0 +1,5 @@ +?package(jnettop):needs="text" section="Apps/Net" \ + title="jnettop" \ + hints="Monitoring" \ + longtitle="View hosts/ports taking up the most network traffic" \ + command="/usr/sbin/su-to-root -c /usr/sbin/jnettop" --- jnettop-0.11.0.orig/debian/copyright +++ jnettop-0.11.0/debian/copyright @@ -0,0 +1,11 @@ +This package was debianized by Ari Pollak on +Tue, 18 Feb 2003 15:00:38 -0500. + +It was downloaded from + +Upstream Author: Jakup Skopal + +Copyright: + +GPL. On Debian systems this can be found at +/usr/share/common-licenses/GPLv2. --- jnettop-0.11.0.orig/debian/control +++ jnettop-0.11.0/debian/control @@ -0,0 +1,15 @@ +Source: jnettop +Section: net +Priority: extra +Maintainer: Ari Pollak +Build-Depends: debhelper (>> 4.0.0), libglib2.0-dev, libncurses5-dev, libpcap-dev +Standards-Version: 3.6.1 + +Package: jnettop +Architecture: any +Depends: ${shlibs:Depends} +Description: View hosts/ports taking up the most network traffic + jNettop captures traffic comming across the host it is running on and displays + streams sorted by bandwidth they use. Result is a nice listing of + communication on network by host and port, how many bytes went + through this transport and the bandwidth it is consuming. --- jnettop-0.11.0.orig/debian/docs +++ jnettop-0.11.0/debian/docs @@ -0,0 +1,2 @@ +NEWS +README --- jnettop-0.11.0.orig/debian/watch +++ jnettop-0.11.0/debian/watch @@ -0,0 +1,2 @@ +version=2 +http://jnettop.kubs.info/ dist/jnettop-([\d\.]*).tar.gz --- jnettop-0.11.0.orig/debian/compat +++ jnettop-0.11.0/debian/compat @@ -0,0 +1 @@ +4 --- jnettop-0.11.0.orig/config.sub +++ jnettop-0.11.0/config.sub @@ -0,0 +1,1569 @@ +#! /bin/sh +# Configuration validation subroutine script. +# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, +# 2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc. + +timestamp='2005-04-22' + +# This file is (in principle) common to ALL GNU software. +# The presence of a machine in this file suggests that SOME GNU software +# can handle that machine. It does not imply ALL GNU software can. +# +# This file is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, +# Boston, MA 02111-1307, USA. + +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# Please send patches to . Submit a context +# diff and a properly formatted ChangeLog entry. +# +# Configuration subroutine to validate and canonicalize a configuration type. +# Supply the specified configuration type as an argument. +# If it is invalid, we print an error message on stderr and exit with code 1. +# Otherwise, we print the canonical config type on stdout and succeed. + +# This file is supposed to be the same for all GNU packages +# and recognize all the CPU types, system types and aliases +# that are meaningful with *any* GNU software. +# Each package is responsible for reporting which valid configurations +# it does not support. The user should be able to distinguish +# a failure to support a valid configuration from a meaningless +# configuration. + +# The goal of this file is to map all the various variations of a given +# machine specification into a single specification in the form: +# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM +# or in some cases, the newer four-part form: +# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM +# It is wrong to echo any other type of specification. + +me=`echo "$0" | sed -e 's,.*/,,'` + +usage="\ +Usage: $0 [OPTION] CPU-MFR-OPSYS + $0 [OPTION] ALIAS + +Canonicalize a configuration name. + +Operation modes: + -h, --help print this help, then exit + -t, --time-stamp print date of last modification, then exit + -v, --version print version number, then exit + +Report bugs and patches to ." + +version="\ +GNU config.sub ($timestamp) + +Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 +Free Software Foundation, Inc. + +This is free software; see the source for copying conditions. There is NO +warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." + +help=" +Try \`$me --help' for more information." + +# Parse command line +while test $# -gt 0 ; do + case $1 in + --time-stamp | --time* | -t ) + echo "$timestamp" ; exit 0 ;; + --version | -v ) + echo "$version" ; exit 0 ;; + --help | --h* | -h ) + echo "$usage"; exit 0 ;; + -- ) # Stop option processing + shift; break ;; + - ) # Use stdin as input. + break ;; + -* ) + echo "$me: invalid option $1$help" + exit 1 ;; + + *local*) + # First pass through any local machine types. + echo $1 + exit 0;; + + * ) + break ;; + esac +done + +case $# in + 0) echo "$me: missing argument$help" >&2 + exit 1;; + 1) ;; + *) echo "$me: too many arguments$help" >&2 + exit 1;; +esac + +# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any). +# Here we must recognize all the valid KERNEL-OS combinations. +maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'` +case $maybe_os in + nto-qnx* | linux-gnu* | linux-dietlibc | linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | \ + kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | storm-chaos* | os2-emx* | rtmk-nova*) + os=-$maybe_os + basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'` + ;; + *) + basic_machine=`echo $1 | sed 's/-[^-]*$//'` + if [ $basic_machine != $1 ] + then os=`echo $1 | sed 's/.*-/-/'` + else os=; fi + ;; +esac + +### Let's recognize common machines as not being operating systems so +### that things like config.sub decstation-3100 work. We also +### recognize some manufacturers as not being operating systems, so we +### can provide default operating systems below. +case $os in + -sun*os*) + # Prevent following clause from handling this invalid input. + ;; + -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \ + -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \ + -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \ + -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\ + -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \ + -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \ + -apple | -axis | -knuth | -cray) + os= + basic_machine=$1 + ;; + -sim | -cisco | -oki | -wec | -winbond) + os= + basic_machine=$1 + ;; + -scout) + ;; + -wrs) + os=-vxworks + basic_machine=$1 + ;; + -chorusos*) + os=-chorusos + basic_machine=$1 + ;; + -chorusrdb) + os=-chorusrdb + basic_machine=$1 + ;; + -hiux*) + os=-hiuxwe2 + ;; + -sco5) + os=-sco3.2v5 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco4) + os=-sco3.2v4 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco3.2.[4-9]*) + os=`echo $os | sed -e 's/sco3.2./sco3.2v/'` + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco3.2v[4-9]*) + # Don't forget version if it is 3.2v4 or newer. + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco*) + os=-sco3.2v2 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -udk*) + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -isc) + os=-isc2.2 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -clix*) + basic_machine=clipper-intergraph + ;; + -isc*) + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -lynx*) + os=-lynxos + ;; + -ptx*) + basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'` + ;; + -windowsnt*) + os=`echo $os | sed -e 's/windowsnt/winnt/'` + ;; + -psos*) + os=-psos + ;; + -mint | -mint[0-9]*) + basic_machine=m68k-atari + os=-mint + ;; +esac + +# Decode aliases for certain CPU-COMPANY combinations. +case $basic_machine in + # Recognize the basic CPU types without company name. + # Some are omitted here because they have special meanings below. + 1750a | 580 \ + | a29k \ + | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \ + | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \ + | am33_2.0 \ + | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr \ + | bfin \ + | c4x | clipper \ + | d10v | d30v | dlx | dsp16xx \ + | fr30 | frv \ + | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \ + | i370 | i860 | i960 | ia64 \ + | ip2k | iq2000 \ + | m32r | m32rle | m68000 | m68k | m88k | maxq | mcore \ + | mips | mipsbe | mipseb | mipsel | mipsle \ + | mips16 \ + | mips64 | mips64el \ + | mips64vr | mips64vrel \ + | mips64orion | mips64orionel \ + | mips64vr4100 | mips64vr4100el \ + | mips64vr4300 | mips64vr4300el \ + | mips64vr5000 | mips64vr5000el \ + | mipsisa32 | mipsisa32el \ + | mipsisa32r2 | mipsisa32r2el \ + | mipsisa64 | mipsisa64el \ + | mipsisa64r2 | mipsisa64r2el \ + | mipsisa64sb1 | mipsisa64sb1el \ + | mipsisa64sr71k | mipsisa64sr71kel \ + | mipstx39 | mipstx39el \ + | mn10200 | mn10300 \ + | msp430 \ + | ns16k | ns32k \ + | openrisc | or32 \ + | pdp10 | pdp11 | pj | pjl \ + | powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \ + | pyramid \ + | sh | sh[1234] | sh[23]e | sh[34]eb | shbe | shle | sh[1234]le | sh3ele \ + | sh64 | sh64le \ + | sparc | sparc64 | sparc64b | sparc86x | sparclet | sparclite \ + | sparcv8 | sparcv9 | sparcv9b \ + | strongarm \ + | tahoe | thumb | tic4x | tic80 | tron \ + | v850 | v850e \ + | we32k \ + | x86 | xscale | xscalee[bl] | xstormy16 | xtensa \ + | z8k) + basic_machine=$basic_machine-unknown + ;; + m6811 | m68hc11 | m6812 | m68hc12) + # Motorola 68HC11/12. + basic_machine=$basic_machine-unknown + os=-none + ;; + m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k) + ;; + + # We use `pc' rather than `unknown' + # because (1) that's what they normally are, and + # (2) the word "unknown" tends to confuse beginning users. + i*86 | x86_64) + basic_machine=$basic_machine-pc + ;; + # Object if more than one company name word. + *-*-*) + echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 + exit 1 + ;; + # Recognize the basic CPU types with company name. + 580-* \ + | a29k-* \ + | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \ + | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \ + | alphapca5[67]-* | alpha64pca5[67]-* | arc-* \ + | arm-* | armbe-* | armle-* | armeb-* | armv*-* \ + | avr-* \ + | bfin-* | bs2000-* \ + | c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \ + | clipper-* | craynv-* | cydra-* \ + | d10v-* | d30v-* | dlx-* \ + | elxsi-* \ + | f30[01]-* | f700-* | fr30-* | frv-* | fx80-* \ + | h8300-* | h8500-* \ + | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \ + | i*86-* | i860-* | i960-* | ia64-* \ + | ip2k-* | iq2000-* \ + | m32r-* | m32rle-* \ + | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \ + | m88110-* | m88k-* | maxq-* | mcore-* \ + | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \ + | mips16-* \ + | mips64-* | mips64el-* \ + | mips64vr-* | mips64vrel-* \ + | mips64orion-* | mips64orionel-* \ + | mips64vr4100-* | mips64vr4100el-* \ + | mips64vr4300-* | mips64vr4300el-* \ + | mips64vr5000-* | mips64vr5000el-* \ + | mipsisa32-* | mipsisa32el-* \ + | mipsisa32r2-* | mipsisa32r2el-* \ + | mipsisa64-* | mipsisa64el-* \ + | mipsisa64r2-* | mipsisa64r2el-* \ + | mipsisa64sb1-* | mipsisa64sb1el-* \ + | mipsisa64sr71k-* | mipsisa64sr71kel-* \ + | mipstx39-* | mipstx39el-* \ + | mmix-* \ + | msp430-* \ + | none-* | np1-* | ns16k-* | ns32k-* \ + | orion-* \ + | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \ + | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \ + | pyramid-* \ + | romp-* | rs6000-* \ + | sh-* | sh[1234]-* | sh[23]e-* | sh[34]eb-* | shbe-* \ + | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \ + | sparc-* | sparc64-* | sparc64b-* | sparc86x-* | sparclet-* \ + | sparclite-* \ + | sparcv8-* | sparcv9-* | sparcv9b-* | strongarm-* | sv1-* | sx?-* \ + | tahoe-* | thumb-* \ + | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \ + | tron-* \ + | v850-* | v850e-* | vax-* \ + | we32k-* \ + | x86-* | x86_64-* | xps100-* | xscale-* | xscalee[bl]-* \ + | xstormy16-* | xtensa-* \ + | ymp-* \ + | z8k-*) + ;; + # Recognize the various machine names and aliases which stand + # for a CPU type and a company and sometimes even an OS. + 386bsd) + basic_machine=i386-unknown + os=-bsd + ;; + 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc) + basic_machine=m68000-att + ;; + 3b*) + basic_machine=we32k-att + ;; + a29khif) + basic_machine=a29k-amd + os=-udi + ;; + abacus) + basic_machine=abacus-unknown + ;; + adobe68k) + basic_machine=m68010-adobe + os=-scout + ;; + alliant | fx80) + basic_machine=fx80-alliant + ;; + altos | altos3068) + basic_machine=m68k-altos + ;; + am29k) + basic_machine=a29k-none + os=-bsd + ;; + amd64) + basic_machine=x86_64-pc + ;; + amd64-*) + basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + amdahl) + basic_machine=580-amdahl + os=-sysv + ;; + amiga | amiga-*) + basic_machine=m68k-unknown + ;; + amigaos | amigados) + basic_machine=m68k-unknown + os=-amigaos + ;; + amigaunix | amix) + basic_machine=m68k-unknown + os=-sysv4 + ;; + apollo68) + basic_machine=m68k-apollo + os=-sysv + ;; + apollo68bsd) + basic_machine=m68k-apollo + os=-bsd + ;; + aux) + basic_machine=m68k-apple + os=-aux + ;; + balance) + basic_machine=ns32k-sequent + os=-dynix + ;; + c90) + basic_machine=c90-cray + os=-unicos + ;; + convex-c1) + basic_machine=c1-convex + os=-bsd + ;; + convex-c2) + basic_machine=c2-convex + os=-bsd + ;; + convex-c32) + basic_machine=c32-convex + os=-bsd + ;; + convex-c34) + basic_machine=c34-convex + os=-bsd + ;; + convex-c38) + basic_machine=c38-convex + os=-bsd + ;; + cray | j90) + basic_machine=j90-cray + os=-unicos + ;; + craynv) + basic_machine=craynv-cray + os=-unicosmp + ;; + cr16c) + basic_machine=cr16c-unknown + os=-elf + ;; + crds | unos) + basic_machine=m68k-crds + ;; + crisv32 | crisv32-* | etraxfs*) + basic_machine=crisv32-axis + ;; + cris | cris-* | etrax*) + basic_machine=cris-axis + ;; + crx) + basic_machine=crx-unknown + os=-elf + ;; + da30 | da30-*) + basic_machine=m68k-da30 + ;; + decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn) + basic_machine=mips-dec + ;; + decsystem10* | dec10*) + basic_machine=pdp10-dec + os=-tops10 + ;; + decsystem20* | dec20*) + basic_machine=pdp10-dec + os=-tops20 + ;; + delta | 3300 | motorola-3300 | motorola-delta \ + | 3300-motorola | delta-motorola) + basic_machine=m68k-motorola + ;; + delta88) + basic_machine=m88k-motorola + os=-sysv3 + ;; + djgpp) + basic_machine=i586-pc + os=-msdosdjgpp + ;; + dpx20 | dpx20-*) + basic_machine=rs6000-bull + os=-bosx + ;; + dpx2* | dpx2*-bull) + basic_machine=m68k-bull + os=-sysv3 + ;; + ebmon29k) + basic_machine=a29k-amd + os=-ebmon + ;; + elxsi) + basic_machine=elxsi-elxsi + os=-bsd + ;; + encore | umax | mmax) + basic_machine=ns32k-encore + ;; + es1800 | OSE68k | ose68k | ose | OSE) + basic_machine=m68k-ericsson + os=-ose + ;; + fx2800) + basic_machine=i860-alliant + ;; + genix) + basic_machine=ns32k-ns + ;; + gmicro) + basic_machine=tron-gmicro + os=-sysv + ;; + go32) + basic_machine=i386-pc + os=-go32 + ;; + h3050r* | hiux*) + basic_machine=hppa1.1-hitachi + os=-hiuxwe2 + ;; + h8300hms) + basic_machine=h8300-hitachi + os=-hms + ;; + h8300xray) + basic_machine=h8300-hitachi + os=-xray + ;; + h8500hms) + basic_machine=h8500-hitachi + os=-hms + ;; + harris) + basic_machine=m88k-harris + os=-sysv3 + ;; + hp300-*) + basic_machine=m68k-hp + ;; + hp300bsd) + basic_machine=m68k-hp + os=-bsd + ;; + hp300hpux) + basic_machine=m68k-hp + os=-hpux + ;; + hp3k9[0-9][0-9] | hp9[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; + hp9k2[0-9][0-9] | hp9k31[0-9]) + basic_machine=m68000-hp + ;; + hp9k3[2-9][0-9]) + basic_machine=m68k-hp + ;; + hp9k6[0-9][0-9] | hp6[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; + hp9k7[0-79][0-9] | hp7[0-79][0-9]) + basic_machine=hppa1.1-hp + ;; + hp9k78[0-9] | hp78[0-9]) + # FIXME: really hppa2.0-hp + basic_machine=hppa1.1-hp + ;; + hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893) + # FIXME: really hppa2.0-hp + basic_machine=hppa1.1-hp + ;; + hp9k8[0-9][13679] | hp8[0-9][13679]) + basic_machine=hppa1.1-hp + ;; + hp9k8[0-9][0-9] | hp8[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; + hppa-next) + os=-nextstep3 + ;; + hppaosf) + basic_machine=hppa1.1-hp + os=-osf + ;; + hppro) + basic_machine=hppa1.1-hp + os=-proelf + ;; + i370-ibm* | ibm*) + basic_machine=i370-ibm + ;; +# I'm not sure what "Sysv32" means. Should this be sysv3.2? + i*86v32) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-sysv32 + ;; + i*86v4*) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-sysv4 + ;; + i*86v) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-sysv + ;; + i*86sol2) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-solaris2 + ;; + i386mach) + basic_machine=i386-mach + os=-mach + ;; + i386-vsta | vsta) + basic_machine=i386-unknown + os=-vsta + ;; + iris | iris4d) + basic_machine=mips-sgi + case $os in + -irix*) + ;; + *) + os=-irix4 + ;; + esac + ;; + isi68 | isi) + basic_machine=m68k-isi + os=-sysv + ;; + m88k-omron*) + basic_machine=m88k-omron + ;; + magnum | m3230) + basic_machine=mips-mips + os=-sysv + ;; + merlin) + basic_machine=ns32k-utek + os=-sysv + ;; + mingw32) + basic_machine=i386-pc + os=-mingw32 + ;; + miniframe) + basic_machine=m68000-convergent + ;; + *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*) + basic_machine=m68k-atari + os=-mint + ;; + mips3*-*) + basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'` + ;; + mips3*) + basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown + ;; + monitor) + basic_machine=m68k-rom68k + os=-coff + ;; + morphos) + basic_machine=powerpc-unknown + os=-morphos + ;; + msdos) + basic_machine=i386-pc + os=-msdos + ;; + mvs) + basic_machine=i370-ibm + os=-mvs + ;; + ncr3000) + basic_machine=i486-ncr + os=-sysv4 + ;; + netbsd386) + basic_machine=i386-unknown + os=-netbsd + ;; + netwinder) + basic_machine=armv4l-rebel + os=-linux + ;; + news | news700 | news800 | news900) + basic_machine=m68k-sony + os=-newsos + ;; + news1000) + basic_machine=m68030-sony + os=-newsos + ;; + news-3600 | risc-news) + basic_machine=mips-sony + os=-newsos + ;; + necv70) + basic_machine=v70-nec + os=-sysv + ;; + next | m*-next ) + basic_machine=m68k-next + case $os in + -nextstep* ) + ;; + -ns2*) + os=-nextstep2 + ;; + *) + os=-nextstep3 + ;; + esac + ;; + nh3000) + basic_machine=m68k-harris + os=-cxux + ;; + nh[45]000) + basic_machine=m88k-harris + os=-cxux + ;; + nindy960) + basic_machine=i960-intel + os=-nindy + ;; + mon960) + basic_machine=i960-intel + os=-mon960 + ;; + nonstopux) + basic_machine=mips-compaq + os=-nonstopux + ;; + np1) + basic_machine=np1-gould + ;; + nsr-tandem) + basic_machine=nsr-tandem + ;; + op50n-* | op60c-*) + basic_machine=hppa1.1-oki + os=-proelf + ;; + or32 | or32-*) + basic_machine=or32-unknown + os=-coff + ;; + os400) + basic_machine=powerpc-ibm + os=-os400 + ;; + OSE68000 | ose68000) + basic_machine=m68000-ericsson + os=-ose + ;; + os68k) + basic_machine=m68k-none + os=-os68k + ;; + pa-hitachi) + basic_machine=hppa1.1-hitachi + os=-hiuxwe2 + ;; + paragon) + basic_machine=i860-intel + os=-osf + ;; + pbd) + basic_machine=sparc-tti + ;; + pbb) + basic_machine=m68k-tti + ;; + pc532 | pc532-*) + basic_machine=ns32k-pc532 + ;; + pentium | p5 | k5 | k6 | nexgen | viac3) + basic_machine=i586-pc + ;; + pentiumpro | p6 | 6x86 | athlon | athlon_*) + basic_machine=i686-pc + ;; + pentiumii | pentium2 | pentiumiii | pentium3) + basic_machine=i686-pc + ;; + pentium4) + basic_machine=i786-pc + ;; + pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*) + basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentiumpro-* | p6-* | 6x86-* | athlon-*) + basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*) + basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentium4-*) + basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pn) + basic_machine=pn-gould + ;; + power) basic_machine=power-ibm + ;; + ppc) basic_machine=powerpc-unknown + ;; + ppc-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ppcle | powerpclittle | ppc-le | powerpc-little) + basic_machine=powerpcle-unknown + ;; + ppcle-* | powerpclittle-*) + basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ppc64) basic_machine=powerpc64-unknown + ;; + ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ppc64le | powerpc64little | ppc64-le | powerpc64-little) + basic_machine=powerpc64le-unknown + ;; + ppc64le-* | powerpc64little-*) + basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ps2) + basic_machine=i386-ibm + ;; + pw32) + basic_machine=i586-unknown + os=-pw32 + ;; + rom68k) + basic_machine=m68k-rom68k + os=-coff + ;; + rm[46]00) + basic_machine=mips-siemens + ;; + rtpc | rtpc-*) + basic_machine=romp-ibm + ;; + s390 | s390-*) + basic_machine=s390-ibm + ;; + s390x | s390x-*) + basic_machine=s390x-ibm + ;; + sa29200) + basic_machine=a29k-amd + os=-udi + ;; + sb1) + basic_machine=mipsisa64sb1-unknown + ;; + sb1el) + basic_machine=mipsisa64sb1el-unknown + ;; + sei) + basic_machine=mips-sei + os=-seiux + ;; + sequent) + basic_machine=i386-sequent + ;; + sh) + basic_machine=sh-hitachi + os=-hms + ;; + sh64) + basic_machine=sh64-unknown + ;; + sparclite-wrs | simso-wrs) + basic_machine=sparclite-wrs + os=-vxworks + ;; + sps7) + basic_machine=m68k-bull + os=-sysv2 + ;; + spur) + basic_machine=spur-unknown + ;; + st2000) + basic_machine=m68k-tandem + ;; + stratus) + basic_machine=i860-stratus + os=-sysv4 + ;; + sun2) + basic_machine=m68000-sun + ;; + sun2os3) + basic_machine=m68000-sun + os=-sunos3 + ;; + sun2os4) + basic_machine=m68000-sun + os=-sunos4 + ;; + sun3os3) + basic_machine=m68k-sun + os=-sunos3 + ;; + sun3os4) + basic_machine=m68k-sun + os=-sunos4 + ;; + sun4os3) + basic_machine=sparc-sun + os=-sunos3 + ;; + sun4os4) + basic_machine=sparc-sun + os=-sunos4 + ;; + sun4sol2) + basic_machine=sparc-sun + os=-solaris2 + ;; + sun3 | sun3-*) + basic_machine=m68k-sun + ;; + sun4) + basic_machine=sparc-sun + ;; + sun386 | sun386i | roadrunner) + basic_machine=i386-sun + ;; + sv1) + basic_machine=sv1-cray + os=-unicos + ;; + symmetry) + basic_machine=i386-sequent + os=-dynix + ;; + t3e) + basic_machine=alphaev5-cray + os=-unicos + ;; + t90) + basic_machine=t90-cray + os=-unicos + ;; + tic54x | c54x*) + basic_machine=tic54x-unknown + os=-coff + ;; + tic55x | c55x*) + basic_machine=tic55x-unknown + os=-coff + ;; + tic6x | c6x*) + basic_machine=tic6x-unknown + os=-coff + ;; + tx39) + basic_machine=mipstx39-unknown + ;; + tx39el) + basic_machine=mipstx39el-unknown + ;; + toad1) + basic_machine=pdp10-xkl + os=-tops20 + ;; + tower | tower-32) + basic_machine=m68k-ncr + ;; + tpf) + basic_machine=s390x-ibm + os=-tpf + ;; + udi29k) + basic_machine=a29k-amd + os=-udi + ;; + ultra3) + basic_machine=a29k-nyu + os=-sym1 + ;; + v810 | necv810) + basic_machine=v810-nec + os=-none + ;; + vaxv) + basic_machine=vax-dec + os=-sysv + ;; + vms) + basic_machine=vax-dec + os=-vms + ;; + vpp*|vx|vx-*) + basic_machine=f301-fujitsu + ;; + vxworks960) + basic_machine=i960-wrs + os=-vxworks + ;; + vxworks68) + basic_machine=m68k-wrs + os=-vxworks + ;; + vxworks29k) + basic_machine=a29k-wrs + os=-vxworks + ;; + w65*) + basic_machine=w65-wdc + os=-none + ;; + w89k-*) + basic_machine=hppa1.1-winbond + os=-proelf + ;; + xbox) + basic_machine=i686-pc + os=-mingw32 + ;; + xps | xps100) + basic_machine=xps100-honeywell + ;; + ymp) + basic_machine=ymp-cray + os=-unicos + ;; + z8k-*-coff) + basic_machine=z8k-unknown + os=-sim + ;; + none) + basic_machine=none-none + os=-none + ;; + +# Here we handle the default manufacturer of certain CPU types. It is in +# some cases the only manufacturer, in others, it is the most popular. + w89k) + basic_machine=hppa1.1-winbond + ;; + op50n) + basic_machine=hppa1.1-oki + ;; + op60c) + basic_machine=hppa1.1-oki + ;; + romp) + basic_machine=romp-ibm + ;; + mmix) + basic_machine=mmix-knuth + ;; + rs6000) + basic_machine=rs6000-ibm + ;; + vax) + basic_machine=vax-dec + ;; + pdp10) + # there are many clones, so DEC is not a safe bet + basic_machine=pdp10-unknown + ;; + pdp11) + basic_machine=pdp11-dec + ;; + we32k) + basic_machine=we32k-att + ;; + sh3 | sh4 | sh[34]eb | sh[1234]le | sh[23]ele) + basic_machine=sh-unknown + ;; + sh64) + basic_machine=sh64-unknown + ;; + sparc | sparcv8 | sparcv9 | sparcv9b) + basic_machine=sparc-sun + ;; + cydra) + basic_machine=cydra-cydrome + ;; + orion) + basic_machine=orion-highlevel + ;; + orion105) + basic_machine=clipper-highlevel + ;; + mac | mpw | mac-mpw) + basic_machine=m68k-apple + ;; + pmac | pmac-mpw) + basic_machine=powerpc-apple + ;; + *-unknown) + # Make sure to match an already-canonicalized machine name. + ;; + *) + echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 + exit 1 + ;; +esac + +# Here we canonicalize certain aliases for manufacturers. +case $basic_machine in + *-digital*) + basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'` + ;; + *-commodore*) + basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'` + ;; + *) + ;; +esac + +# Decode manufacturer-specific aliases for certain operating systems. + +if [ x"$os" != x"" ] +then +case $os in + # First match some system type aliases + # that might get confused with valid system types. + # -solaris* is a basic system type, with this one exception. + -solaris1 | -solaris1.*) + os=`echo $os | sed -e 's|solaris1|sunos4|'` + ;; + -solaris) + os=-solaris2 + ;; + -svr4*) + os=-sysv4 + ;; + -unixware*) + os=-sysv4.2uw + ;; + -gnu/linux*) + os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'` + ;; + # First accept the basic system types. + # The portable systems comes first. + # Each alternative MUST END IN A *, to match a version number. + # -sysv* is not here because it comes later, after sysvr4. + -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \ + | -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\ + | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \ + | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \ + | -aos* \ + | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \ + | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \ + | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* | -openbsd* \ + | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \ + | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \ + | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \ + | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \ + | -chorusos* | -chorusrdb* \ + | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \ + | -mingw32* | -linux-gnu* | -linux-uclibc* | -uxpv* | -beos* | -mpeix* | -udk* \ + | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \ + | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \ + | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \ + | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \ + | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \ + | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly*) + # Remember, each alternative MUST END IN *, to match a version number. + ;; + -qnx*) + case $basic_machine in + x86-* | i*86-*) + ;; + *) + os=-nto$os + ;; + esac + ;; + -nto-qnx*) + ;; + -nto*) + os=`echo $os | sed -e 's|nto|nto-qnx|'` + ;; + -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \ + | -windows* | -osx | -abug | -netware* | -os9* | -beos* \ + | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*) + ;; + -mac*) + os=`echo $os | sed -e 's|mac|macos|'` + ;; + -linux-dietlibc) + os=-linux-dietlibc + ;; + -linux*) + os=`echo $os | sed -e 's|linux|linux-gnu|'` + ;; + -sunos5*) + os=`echo $os | sed -e 's|sunos5|solaris2|'` + ;; + -sunos6*) + os=`echo $os | sed -e 's|sunos6|solaris3|'` + ;; + -opened*) + os=-openedition + ;; + -os400*) + os=-os400 + ;; + -wince*) + os=-wince + ;; + -osfrose*) + os=-osfrose + ;; + -osf*) + os=-osf + ;; + -utek*) + os=-bsd + ;; + -dynix*) + os=-bsd + ;; + -acis*) + os=-aos + ;; + -atheos*) + os=-atheos + ;; + -syllable*) + os=-syllable + ;; + -386bsd) + os=-bsd + ;; + -ctix* | -uts*) + os=-sysv + ;; + -nova*) + os=-rtmk-nova + ;; + -ns2 ) + os=-nextstep2 + ;; + -nsk*) + os=-nsk + ;; + # Preserve the version number of sinix5. + -sinix5.*) + os=`echo $os | sed -e 's|sinix|sysv|'` + ;; + -sinix*) + os=-sysv4 + ;; + -tpf*) + os=-tpf + ;; + -triton*) + os=-sysv3 + ;; + -oss*) + os=-sysv3 + ;; + -svr4) + os=-sysv4 + ;; + -svr3) + os=-sysv3 + ;; + -sysvr4) + os=-sysv4 + ;; + # This must come after -sysvr4. + -sysv*) + ;; + -ose*) + os=-ose + ;; + -es1800*) + os=-ose + ;; + -xenix) + os=-xenix + ;; + -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) + os=-mint + ;; + -aros*) + os=-aros + ;; + -kaos*) + os=-kaos + ;; + -zvmoe) + os=-zvmoe + ;; + -none) + ;; + *) + # Get rid of the `-' at the beginning of $os. + os=`echo $os | sed 's/[^-]*-//'` + echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2 + exit 1 + ;; +esac +else + +# Here we handle the default operating systems that come with various machines. +# The value should be what the vendor currently ships out the door with their +# machine or put another way, the most popular os provided with the machine. + +# Note that if you're going to try to match "-MANUFACTURER" here (say, +# "-sun"), then you have to tell the case statement up towards the top +# that MANUFACTURER isn't an operating system. Otherwise, code above +# will signal an error saying that MANUFACTURER isn't an operating +# system, and we'll never get to this point. + +case $basic_machine in + *-acorn) + os=-riscix1.2 + ;; + arm*-rebel) + os=-linux + ;; + arm*-semi) + os=-aout + ;; + c4x-* | tic4x-*) + os=-coff + ;; + # This must come before the *-dec entry. + pdp10-*) + os=-tops20 + ;; + pdp11-*) + os=-none + ;; + *-dec | vax-*) + os=-ultrix4.2 + ;; + m68*-apollo) + os=-domain + ;; + i386-sun) + os=-sunos4.0.2 + ;; + m68000-sun) + os=-sunos3 + # This also exists in the configure program, but was not the + # default. + # os=-sunos4 + ;; + m68*-cisco) + os=-aout + ;; + mips*-cisco) + os=-elf + ;; + mips*-*) + os=-elf + ;; + or32-*) + os=-coff + ;; + *-tti) # must be before sparc entry or we get the wrong os. + os=-sysv3 + ;; + sparc-* | *-sun) + os=-sunos4.1.1 + ;; + *-be) + os=-beos + ;; + *-ibm) + os=-aix + ;; + *-knuth) + os=-mmixware + ;; + *-wec) + os=-proelf + ;; + *-winbond) + os=-proelf + ;; + *-oki) + os=-proelf + ;; + *-hp) + os=-hpux + ;; + *-hitachi) + os=-hiux + ;; + i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent) + os=-sysv + ;; + *-cbm) + os=-amigaos + ;; + *-dg) + os=-dgux + ;; + *-dolphin) + os=-sysv3 + ;; + m68k-ccur) + os=-rtu + ;; + m88k-omron*) + os=-luna + ;; + *-next ) + os=-nextstep + ;; + *-sequent) + os=-ptx + ;; + *-crds) + os=-unos + ;; + *-ns) + os=-genix + ;; + i370-*) + os=-mvs + ;; + *-next) + os=-nextstep3 + ;; + *-gould) + os=-sysv + ;; + *-highlevel) + os=-bsd + ;; + *-encore) + os=-bsd + ;; + *-sgi) + os=-irix + ;; + *-siemens) + os=-sysv4 + ;; + *-masscomp) + os=-rtu + ;; + f30[01]-fujitsu | f700-fujitsu) + os=-uxpv + ;; + *-rom68k) + os=-coff + ;; + *-*bug) + os=-coff + ;; + *-apple) + os=-macos + ;; + *-atari*) + os=-mint + ;; + *) + os=-none + ;; +esac +fi + +# Here we handle the case where we know the os, and the CPU type, but not the +# manufacturer. We pick the logical manufacturer. +vendor=unknown +case $basic_machine in + *-unknown) + case $os in + -riscix*) + vendor=acorn + ;; + -sunos*) + vendor=sun + ;; + -aix*) + vendor=ibm + ;; + -beos*) + vendor=be + ;; + -hpux*) + vendor=hp + ;; + -mpeix*) + vendor=hp + ;; + -hiux*) + vendor=hitachi + ;; + -unos*) + vendor=crds + ;; + -dgux*) + vendor=dg + ;; + -luna*) + vendor=omron + ;; + -genix*) + vendor=ns + ;; + -mvs* | -opened*) + vendor=ibm + ;; + -os400*) + vendor=ibm + ;; + -ptx*) + vendor=sequent + ;; + -tpf*) + vendor=ibm + ;; + -vxsim* | -vxworks* | -windiss*) + vendor=wrs + ;; + -aux*) + vendor=apple + ;; + -hms*) + vendor=hitachi + ;; + -mpw* | -macos*) + vendor=apple + ;; + -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) + vendor=atari + ;; + -vos*) + vendor=stratus + ;; + esac + basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"` + ;; +esac + +echo $basic_machine$os +exit 0 + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "timestamp='" +# time-stamp-format: "%:y-%02m-%02d" +# time-stamp-end: "'" +# End: --- jnettop-0.11.0.orig/config.guess +++ jnettop-0.11.0/config.guess @@ -0,0 +1,1465 @@ +#! /bin/sh +# Attempt to guess a canonical system name. +# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, +# 2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc. + +timestamp='2005-04-22' + +# This file is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# Originally written by Per Bothner . +# Please send patches to . Submit a context +# diff and a properly formatted ChangeLog entry. +# +# This script attempts to guess a canonical system name similar to +# config.sub. If it succeeds, it prints the system name on stdout, and +# exits with 0. Otherwise, it exits with 1. +# +# The plan is that this can be called by configure scripts if you +# don't specify an explicit build system type. + +me=`echo "$0" | sed -e 's,.*/,,'` + +usage="\ +Usage: $0 [OPTION] + +Output the configuration name of the system \`$me' is run on. + +Operation modes: + -h, --help print this help, then exit + -t, --time-stamp print date of last modification, then exit + -v, --version print version number, then exit + +Report bugs and patches to ." + +version="\ +GNU config.guess ($timestamp) + +Originally written by Per Bothner. +Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 +Free Software Foundation, Inc. + +This is free software; see the source for copying conditions. There is NO +warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." + +help=" +Try \`$me --help' for more information." + +# Parse command line +while test $# -gt 0 ; do + case $1 in + --time-stamp | --time* | -t ) + echo "$timestamp" ; exit 0 ;; + --version | -v ) + echo "$version" ; exit 0 ;; + --help | --h* | -h ) + echo "$usage"; exit 0 ;; + -- ) # Stop option processing + shift; break ;; + - ) # Use stdin as input. + break ;; + -* ) + echo "$me: invalid option $1$help" >&2 + exit 1 ;; + * ) + break ;; + esac +done + +if test $# != 0; then + echo "$me: too many arguments$help" >&2 + exit 1 +fi + +trap 'exit 1' 1 2 15 + +# CC_FOR_BUILD -- compiler used by this script. Note that the use of a +# compiler to aid in system detection is discouraged as it requires +# temporary files to be created and, as you can see below, it is a +# headache to deal with in a portable fashion. + +# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still +# use `HOST_CC' if defined, but it is deprecated. + +# Portable tmp directory creation inspired by the Autoconf team. + +set_cc_for_build=' +trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ; +trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ; +: ${TMPDIR=/tmp} ; + { tmp=`(umask 077 && mktemp -d -q "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } || + { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } || + { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } || + { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ; +dummy=$tmp/dummy ; +tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ; +case $CC_FOR_BUILD,$HOST_CC,$CC in + ,,) echo "int x;" > $dummy.c ; + for c in cc gcc c89 c99 ; do + if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then + CC_FOR_BUILD="$c"; break ; + fi ; + done ; + if test x"$CC_FOR_BUILD" = x ; then + CC_FOR_BUILD=no_compiler_found ; + fi + ;; + ,,*) CC_FOR_BUILD=$CC ;; + ,*,*) CC_FOR_BUILD=$HOST_CC ;; +esac ;' + +# This is needed to find uname on a Pyramid OSx when run in the BSD universe. +# (ghazi@noc.rutgers.edu 1994-08-24) +if (test -f /.attbin/uname) >/dev/null 2>&1 ; then + PATH=$PATH:/.attbin ; export PATH +fi + +UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown +UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown +UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown +UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown + +# Note: order is significant - the case branches are not exclusive. + +case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in + *:NetBSD:*:*) + # NetBSD (nbsd) targets should (where applicable) match one or + # more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*, + # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently + # switched to ELF, *-*-netbsd* would select the old + # object file format. This provides both forward + # compatibility and a consistent mechanism for selecting the + # object file format. + # + # Note: NetBSD doesn't particularly care about the vendor + # portion of the name. We always set it to "unknown". + sysctl="sysctl -n hw.machine_arch" + UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \ + /usr/sbin/$sysctl 2>/dev/null || echo unknown)` + case "${UNAME_MACHINE_ARCH}" in + armeb) machine=armeb-unknown ;; + arm*) machine=arm-unknown ;; + sh3el) machine=shl-unknown ;; + sh3eb) machine=sh-unknown ;; + *) machine=${UNAME_MACHINE_ARCH}-unknown ;; + esac + # The Operating System including object format, if it has switched + # to ELF recently, or will in the future. + case "${UNAME_MACHINE_ARCH}" in + arm*|i386|m68k|ns32k|sh3*|sparc|vax) + eval $set_cc_for_build + if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \ + | grep __ELF__ >/dev/null + then + # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout). + # Return netbsd for either. FIX? + os=netbsd + else + os=netbsdelf + fi + ;; + *) + os=netbsd + ;; + esac + # The OS release + # Debian GNU/NetBSD machines have a different userland, and + # thus, need a distinct triplet. However, they do not need + # kernel version information, so it can be replaced with a + # suitable tag, in the style of linux-gnu. + case "${UNAME_VERSION}" in + Debian*) + release='-gnu' + ;; + *) + release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` + ;; + esac + # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM: + # contains redundant information, the shorter form: + # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used. + echo "${machine}-${os}${release}" + exit 0 ;; + amd64:OpenBSD:*:*) + echo x86_64-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + amiga:OpenBSD:*:*) + echo m68k-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + cats:OpenBSD:*:*) + echo arm-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + hp300:OpenBSD:*:*) + echo m68k-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + luna88k:OpenBSD:*:*) + echo m88k-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + mac68k:OpenBSD:*:*) + echo m68k-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + macppc:OpenBSD:*:*) + echo powerpc-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + mvme68k:OpenBSD:*:*) + echo m68k-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + mvme88k:OpenBSD:*:*) + echo m88k-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + mvmeppc:OpenBSD:*:*) + echo powerpc-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + sgi:OpenBSD:*:*) + echo mips64-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + sun3:OpenBSD:*:*) + echo m68k-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + *:OpenBSD:*:*) + echo ${UNAME_MACHINE}-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + *:ekkoBSD:*:*) + echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE} + exit 0 ;; + macppc:MirBSD:*:*) + echo powerppc-unknown-mirbsd${UNAME_RELEASE} + exit 0 ;; + *:MirBSD:*:*) + echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE} + exit 0 ;; + alpha:OSF1:*:*) + case $UNAME_RELEASE in + *4.0) + UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'` + ;; + *5.*) + UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'` + ;; + esac + # According to Compaq, /usr/sbin/psrinfo has been available on + # OSF/1 and Tru64 systems produced since 1995. I hope that + # covers most systems running today. This code pipes the CPU + # types through head -n 1, so we only detect the type of CPU 0. + ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1` + case "$ALPHA_CPU_TYPE" in + "EV4 (21064)") + UNAME_MACHINE="alpha" ;; + "EV4.5 (21064)") + UNAME_MACHINE="alpha" ;; + "LCA4 (21066/21068)") + UNAME_MACHINE="alpha" ;; + "EV5 (21164)") + UNAME_MACHINE="alphaev5" ;; + "EV5.6 (21164A)") + UNAME_MACHINE="alphaev56" ;; + "EV5.6 (21164PC)") + UNAME_MACHINE="alphapca56" ;; + "EV5.7 (21164PC)") + UNAME_MACHINE="alphapca57" ;; + "EV6 (21264)") + UNAME_MACHINE="alphaev6" ;; + "EV6.7 (21264A)") + UNAME_MACHINE="alphaev67" ;; + "EV6.8CB (21264C)") + UNAME_MACHINE="alphaev68" ;; + "EV6.8AL (21264B)") + UNAME_MACHINE="alphaev68" ;; + "EV6.8CX (21264D)") + UNAME_MACHINE="alphaev68" ;; + "EV6.9A (21264/EV69A)") + UNAME_MACHINE="alphaev69" ;; + "EV7 (21364)") + UNAME_MACHINE="alphaev7" ;; + "EV7.9 (21364A)") + UNAME_MACHINE="alphaev79" ;; + esac + # A Pn.n version is a patched version. + # A Vn.n version is a released version. + # A Tn.n version is a released field test version. + # A Xn.n version is an unreleased experimental baselevel. + # 1.2 uses "1.2" for uname -r. + echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` + exit 0 ;; + Alpha\ *:Windows_NT*:*) + # How do we know it's Interix rather than the generic POSIX subsystem? + # Should we change UNAME_MACHINE based on the output of uname instead + # of the specific Alpha model? + echo alpha-pc-interix + exit 0 ;; + 21064:Windows_NT:50:3) + echo alpha-dec-winnt3.5 + exit 0 ;; + Amiga*:UNIX_System_V:4.0:*) + echo m68k-unknown-sysv4 + exit 0;; + *:[Aa]miga[Oo][Ss]:*:*) + echo ${UNAME_MACHINE}-unknown-amigaos + exit 0 ;; + *:[Mm]orph[Oo][Ss]:*:*) + echo ${UNAME_MACHINE}-unknown-morphos + exit 0 ;; + *:OS/390:*:*) + echo i370-ibm-openedition + exit 0 ;; + *:z/VM:*:*) + echo s390-ibm-zvmoe + exit 0 ;; + *:OS400:*:*) + echo powerpc-ibm-os400 + exit 0 ;; + arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*) + echo arm-acorn-riscix${UNAME_RELEASE} + exit 0;; + SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*) + echo hppa1.1-hitachi-hiuxmpp + exit 0;; + Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*) + # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE. + if test "`(/bin/universe) 2>/dev/null`" = att ; then + echo pyramid-pyramid-sysv3 + else + echo pyramid-pyramid-bsd + fi + exit 0 ;; + NILE*:*:*:dcosx) + echo pyramid-pyramid-svr4 + exit 0 ;; + DRS?6000:unix:4.0:6*) + echo sparc-icl-nx6 + exit 0 ;; + DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*) + case `/usr/bin/uname -p` in + sparc) echo sparc-icl-nx7 && exit 0 ;; + esac ;; + sun4H:SunOS:5.*:*) + echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit 0 ;; + sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) + echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit 0 ;; + i86pc:SunOS:5.*:*) + echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit 0 ;; + sun4*:SunOS:6*:*) + # According to config.sub, this is the proper way to canonicalize + # SunOS6. Hard to guess exactly what SunOS6 will be like, but + # it's likely to be more like Solaris than SunOS4. + echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit 0 ;; + sun4*:SunOS:*:*) + case "`/usr/bin/arch -k`" in + Series*|S4*) + UNAME_RELEASE=`uname -v` + ;; + esac + # Japanese Language versions have a version number like `4.1.3-JL'. + echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'` + exit 0 ;; + sun3*:SunOS:*:*) + echo m68k-sun-sunos${UNAME_RELEASE} + exit 0 ;; + sun*:*:4.2BSD:*) + UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` + test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3 + case "`/bin/arch`" in + sun3) + echo m68k-sun-sunos${UNAME_RELEASE} + ;; + sun4) + echo sparc-sun-sunos${UNAME_RELEASE} + ;; + esac + exit 0 ;; + aushp:SunOS:*:*) + echo sparc-auspex-sunos${UNAME_RELEASE} + exit 0 ;; + # The situation for MiNT is a little confusing. The machine name + # can be virtually everything (everything which is not + # "atarist" or "atariste" at least should have a processor + # > m68000). The system name ranges from "MiNT" over "FreeMiNT" + # to the lowercase version "mint" (or "freemint"). Finally + # the system name "TOS" denotes a system which is actually not + # MiNT. But MiNT is downward compatible to TOS, so this should + # be no problem. + atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} + exit 0 ;; + atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} + exit 0 ;; + *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} + exit 0 ;; + milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*) + echo m68k-milan-mint${UNAME_RELEASE} + exit 0 ;; + hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*) + echo m68k-hades-mint${UNAME_RELEASE} + exit 0 ;; + *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*) + echo m68k-unknown-mint${UNAME_RELEASE} + exit 0 ;; + m68k:machten:*:*) + echo m68k-apple-machten${UNAME_RELEASE} + exit 0 ;; + powerpc:machten:*:*) + echo powerpc-apple-machten${UNAME_RELEASE} + exit 0 ;; + RISC*:Mach:*:*) + echo mips-dec-mach_bsd4.3 + exit 0 ;; + RISC*:ULTRIX:*:*) + echo mips-dec-ultrix${UNAME_RELEASE} + exit 0 ;; + VAX*:ULTRIX*:*:*) + echo vax-dec-ultrix${UNAME_RELEASE} + exit 0 ;; + 2020:CLIX:*:* | 2430:CLIX:*:*) + echo clipper-intergraph-clix${UNAME_RELEASE} + exit 0 ;; + mips:*:*:UMIPS | mips:*:*:RISCos) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c +#ifdef __cplusplus +#include /* for printf() prototype */ + int main (int argc, char *argv[]) { +#else + int main (argc, argv) int argc; char *argv[]; { +#endif + #if defined (host_mips) && defined (MIPSEB) + #if defined (SYSTYPE_SYSV) + printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0); + #endif + #if defined (SYSTYPE_SVR4) + printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0); + #endif + #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD) + printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0); + #endif + #endif + exit (-1); + } +EOF + $CC_FOR_BUILD -o $dummy $dummy.c \ + && $dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \ + && exit 0 + echo mips-mips-riscos${UNAME_RELEASE} + exit 0 ;; + Motorola:PowerMAX_OS:*:*) + echo powerpc-motorola-powermax + exit 0 ;; + Motorola:*:4.3:PL8-*) + echo powerpc-harris-powermax + exit 0 ;; + Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*) + echo powerpc-harris-powermax + exit 0 ;; + Night_Hawk:Power_UNIX:*:*) + echo powerpc-harris-powerunix + exit 0 ;; + m88k:CX/UX:7*:*) + echo m88k-harris-cxux7 + exit 0 ;; + m88k:*:4*:R4*) + echo m88k-motorola-sysv4 + exit 0 ;; + m88k:*:3*:R3*) + echo m88k-motorola-sysv3 + exit 0 ;; + AViiON:dgux:*:*) + # DG/UX returns AViiON for all architectures + UNAME_PROCESSOR=`/usr/bin/uname -p` + if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ] + then + if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \ + [ ${TARGET_BINARY_INTERFACE}x = x ] + then + echo m88k-dg-dgux${UNAME_RELEASE} + else + echo m88k-dg-dguxbcs${UNAME_RELEASE} + fi + else + echo i586-dg-dgux${UNAME_RELEASE} + fi + exit 0 ;; + M88*:DolphinOS:*:*) # DolphinOS (SVR3) + echo m88k-dolphin-sysv3 + exit 0 ;; + M88*:*:R3*:*) + # Delta 88k system running SVR3 + echo m88k-motorola-sysv3 + exit 0 ;; + XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3) + echo m88k-tektronix-sysv3 + exit 0 ;; + Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD) + echo m68k-tektronix-bsd + exit 0 ;; + *:IRIX*:*:*) + echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'` + exit 0 ;; + ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX. + echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id + exit 0 ;; # Note that: echo "'`uname -s`'" gives 'AIX ' + i*86:AIX:*:*) + echo i386-ibm-aix + exit 0 ;; + ia64:AIX:*:*) + if [ -x /usr/bin/oslevel ] ; then + IBM_REV=`/usr/bin/oslevel` + else + IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} + fi + echo ${UNAME_MACHINE}-ibm-aix${IBM_REV} + exit 0 ;; + *:AIX:2:3) + if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #include + + main() + { + if (!__power_pc()) + exit(1); + puts("powerpc-ibm-aix3.2.5"); + exit(0); + } +EOF + $CC_FOR_BUILD -o $dummy $dummy.c && $dummy && exit 0 + echo rs6000-ibm-aix3.2.5 + elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then + echo rs6000-ibm-aix3.2.4 + else + echo rs6000-ibm-aix3.2 + fi + exit 0 ;; + *:AIX:*:[45]) + IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'` + if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then + IBM_ARCH=rs6000 + else + IBM_ARCH=powerpc + fi + if [ -x /usr/bin/oslevel ] ; then + IBM_REV=`/usr/bin/oslevel` + else + IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} + fi + echo ${IBM_ARCH}-ibm-aix${IBM_REV} + exit 0 ;; + *:AIX:*:*) + echo rs6000-ibm-aix + exit 0 ;; + ibmrt:4.4BSD:*|romp-ibm:BSD:*) + echo romp-ibm-bsd4.4 + exit 0 ;; + ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and + echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to + exit 0 ;; # report: romp-ibm BSD 4.3 + *:BOSX:*:*) + echo rs6000-bull-bosx + exit 0 ;; + DPX/2?00:B.O.S.:*:*) + echo m68k-bull-sysv3 + exit 0 ;; + 9000/[34]??:4.3bsd:1.*:*) + echo m68k-hp-bsd + exit 0 ;; + hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*) + echo m68k-hp-bsd4.4 + exit 0 ;; + 9000/[34678]??:HP-UX:*:*) + HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` + case "${UNAME_MACHINE}" in + 9000/31? ) HP_ARCH=m68000 ;; + 9000/[34]?? ) HP_ARCH=m68k ;; + 9000/[678][0-9][0-9]) + if [ -x /usr/bin/getconf ]; then + sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null` + sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null` + case "${sc_cpu_version}" in + 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0 + 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1 + 532) # CPU_PA_RISC2_0 + case "${sc_kernel_bits}" in + 32) HP_ARCH="hppa2.0n" ;; + 64) HP_ARCH="hppa2.0w" ;; + '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20 + esac ;; + esac + fi + if [ "${HP_ARCH}" = "" ]; then + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + + #define _HPUX_SOURCE + #include + #include + + int main () + { + #if defined(_SC_KERNEL_BITS) + long bits = sysconf(_SC_KERNEL_BITS); + #endif + long cpu = sysconf (_SC_CPU_VERSION); + + switch (cpu) + { + case CPU_PA_RISC1_0: puts ("hppa1.0"); break; + case CPU_PA_RISC1_1: puts ("hppa1.1"); break; + case CPU_PA_RISC2_0: + #if defined(_SC_KERNEL_BITS) + switch (bits) + { + case 64: puts ("hppa2.0w"); break; + case 32: puts ("hppa2.0n"); break; + default: puts ("hppa2.0"); break; + } break; + #else /* !defined(_SC_KERNEL_BITS) */ + puts ("hppa2.0"); break; + #endif + default: puts ("hppa1.0"); break; + } + exit (0); + } +EOF + (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy` + test -z "$HP_ARCH" && HP_ARCH=hppa + fi ;; + esac + if [ ${HP_ARCH} = "hppa2.0w" ] + then + # avoid double evaluation of $set_cc_for_build + test -n "$CC_FOR_BUILD" || eval $set_cc_for_build + if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E -) | grep __LP64__ >/dev/null + then + HP_ARCH="hppa2.0w" + else + HP_ARCH="hppa64" + fi + fi + echo ${HP_ARCH}-hp-hpux${HPUX_REV} + exit 0 ;; + ia64:HP-UX:*:*) + HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` + echo ia64-hp-hpux${HPUX_REV} + exit 0 ;; + 3050*:HI-UX:*:*) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #include + int + main () + { + long cpu = sysconf (_SC_CPU_VERSION); + /* The order matters, because CPU_IS_HP_MC68K erroneously returns + true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct + results, however. */ + if (CPU_IS_PA_RISC (cpu)) + { + switch (cpu) + { + case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break; + case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break; + case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break; + default: puts ("hppa-hitachi-hiuxwe2"); break; + } + } + else if (CPU_IS_HP_MC68K (cpu)) + puts ("m68k-hitachi-hiuxwe2"); + else puts ("unknown-hitachi-hiuxwe2"); + exit (0); + } +EOF + $CC_FOR_BUILD -o $dummy $dummy.c && $dummy && exit 0 + echo unknown-hitachi-hiuxwe2 + exit 0 ;; + 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* ) + echo hppa1.1-hp-bsd + exit 0 ;; + 9000/8??:4.3bsd:*:*) + echo hppa1.0-hp-bsd + exit 0 ;; + *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*) + echo hppa1.0-hp-mpeix + exit 0 ;; + hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* ) + echo hppa1.1-hp-osf + exit 0 ;; + hp8??:OSF1:*:*) + echo hppa1.0-hp-osf + exit 0 ;; + i*86:OSF1:*:*) + if [ -x /usr/sbin/sysversion ] ; then + echo ${UNAME_MACHINE}-unknown-osf1mk + else + echo ${UNAME_MACHINE}-unknown-osf1 + fi + exit 0 ;; + parisc*:Lites*:*:*) + echo hppa1.1-hp-lites + exit 0 ;; + C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*) + echo c1-convex-bsd + exit 0 ;; + C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*) + if getsysinfo -f scalar_acc + then echo c32-convex-bsd + else echo c2-convex-bsd + fi + exit 0 ;; + C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*) + echo c34-convex-bsd + exit 0 ;; + C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*) + echo c38-convex-bsd + exit 0 ;; + C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*) + echo c4-convex-bsd + exit 0 ;; + CRAY*Y-MP:*:*:*) + echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit 0 ;; + CRAY*[A-Z]90:*:*:*) + echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \ + | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \ + -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \ + -e 's/\.[^.]*$/.X/' + exit 0 ;; + CRAY*TS:*:*:*) + echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit 0 ;; + CRAY*T3E:*:*:*) + echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit 0 ;; + CRAY*SV1:*:*:*) + echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit 0 ;; + *:UNICOS/mp:*:*) + echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit 0 ;; + F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*) + FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` + FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` + FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'` + echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" + exit 0 ;; + 5000:UNIX_System_V:4.*:*) + FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` + FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'` + echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" + exit 0 ;; + i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*) + echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE} + exit 0 ;; + sparc*:BSD/OS:*:*) + echo sparc-unknown-bsdi${UNAME_RELEASE} + exit 0 ;; + *:BSD/OS:*:*) + echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE} + exit 0 ;; + *:FreeBSD:*:*) + echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` + exit 0 ;; + i*:CYGWIN*:*) + echo ${UNAME_MACHINE}-pc-cygwin + exit 0 ;; + i*:MINGW*:*) + echo ${UNAME_MACHINE}-pc-mingw32 + exit 0 ;; + i*:PW*:*) + echo ${UNAME_MACHINE}-pc-pw32 + exit 0 ;; + x86:Interix*:[34]*) + echo i586-pc-interix${UNAME_RELEASE}|sed -e 's/\..*//' + exit 0 ;; + [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*) + echo i${UNAME_MACHINE}-pc-mks + exit 0 ;; + i*:Windows_NT*:* | Pentium*:Windows_NT*:*) + # How do we know it's Interix rather than the generic POSIX subsystem? + # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we + # UNAME_MACHINE based on the output of uname instead of i386? + echo i586-pc-interix + exit 0 ;; + i*:UWIN*:*) + echo ${UNAME_MACHINE}-pc-uwin + exit 0 ;; + amd64:CYGWIN*:*:*) + echo x86_64-unknown-cygwin + exit 0 ;; + p*:CYGWIN*:*) + echo powerpcle-unknown-cygwin + exit 0 ;; + prep*:SunOS:5.*:*) + echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit 0 ;; + *:GNU:*:*) + # the GNU system + echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'` + exit 0 ;; + *:GNU/*:*:*) + # other systems with GNU libc and userland + echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu + exit 0 ;; + i*86:Minix:*:*) + echo ${UNAME_MACHINE}-pc-minix + exit 0 ;; + arm*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit 0 ;; + cris:Linux:*:*) + echo cris-axis-linux-gnu + exit 0 ;; + crisv32:Linux:*:*) + echo crisv32-axis-linux-gnu + exit 0 ;; + frv:Linux:*:*) + echo frv-unknown-linux-gnu + exit 0 ;; + ia64:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit 0 ;; + m32r*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit 0 ;; + m68*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit 0 ;; + mips:Linux:*:*) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #undef CPU + #undef mips + #undef mipsel + #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) + CPU=mipsel + #else + #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) + CPU=mips + #else + CPU= + #endif + #endif +EOF + eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=` + test x"${CPU}" != x && echo "${CPU}-unknown-linux-gnu" && exit 0 + ;; + mips64:Linux:*:*) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #undef CPU + #undef mips64 + #undef mips64el + #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) + CPU=mips64el + #else + #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) + CPU=mips64 + #else + CPU= + #endif + #endif +EOF + eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=` + test x"${CPU}" != x && echo "${CPU}-unknown-linux-gnu" && exit 0 + ;; + ppc:Linux:*:*) + echo powerpc-unknown-linux-gnu + exit 0 ;; + ppc64:Linux:*:*) + echo powerpc64-unknown-linux-gnu + exit 0 ;; + alpha:Linux:*:*) + case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in + EV5) UNAME_MACHINE=alphaev5 ;; + EV56) UNAME_MACHINE=alphaev56 ;; + PCA56) UNAME_MACHINE=alphapca56 ;; + PCA57) UNAME_MACHINE=alphapca56 ;; + EV6) UNAME_MACHINE=alphaev6 ;; + EV67) UNAME_MACHINE=alphaev67 ;; + EV68*) UNAME_MACHINE=alphaev68 ;; + esac + objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null + if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi + echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} + exit 0 ;; + parisc:Linux:*:* | hppa:Linux:*:*) + # Look for CPU level + case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in + PA7*) echo hppa1.1-unknown-linux-gnu ;; + PA8*) echo hppa2.0-unknown-linux-gnu ;; + *) echo hppa-unknown-linux-gnu ;; + esac + exit 0 ;; + parisc64:Linux:*:* | hppa64:Linux:*:*) + echo hppa64-unknown-linux-gnu + exit 0 ;; + s390:Linux:*:* | s390x:Linux:*:*) + echo ${UNAME_MACHINE}-ibm-linux + exit 0 ;; + sh64*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit 0 ;; + sh*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit 0 ;; + sparc:Linux:*:* | sparc64:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit 0 ;; + x86_64:Linux:*:*) + echo x86_64-unknown-linux-gnu + exit 0 ;; + i*86:Linux:*:*) + # The BFD linker knows what the default object file format is, so + # first see if it will tell us. cd to the root directory to prevent + # problems with other programs or directories called `ld' in the path. + # Set LC_ALL=C to ensure ld outputs messages in English. + ld_supported_targets=`cd /; LC_ALL=C ld --help 2>&1 \ + | sed -ne '/supported targets:/!d + s/[ ][ ]*/ /g + s/.*supported targets: *// + s/ .*// + p'` + case "$ld_supported_targets" in + elf32-i386) + TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu" + ;; + a.out-i386-linux) + echo "${UNAME_MACHINE}-pc-linux-gnuaout" + exit 0 ;; + coff-i386) + echo "${UNAME_MACHINE}-pc-linux-gnucoff" + exit 0 ;; + "") + # Either a pre-BFD a.out linker (linux-gnuoldld) or + # one that does not give us useful --help. + echo "${UNAME_MACHINE}-pc-linux-gnuoldld" + exit 0 ;; + esac + # Determine whether the default compiler is a.out or elf + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #include + #ifdef __ELF__ + # ifdef __GLIBC__ + # if __GLIBC__ >= 2 + LIBC=gnu + # else + LIBC=gnulibc1 + # endif + # else + LIBC=gnulibc1 + # endif + #else + #ifdef __INTEL_COMPILER + LIBC=gnu + #else + LIBC=gnuaout + #endif + #endif + #ifdef __dietlibc__ + LIBC=dietlibc + #endif +EOF + eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=` + test x"${LIBC}" != x && echo "${UNAME_MACHINE}-pc-linux-${LIBC}" && exit 0 + test x"${TENTATIVE}" != x && echo "${TENTATIVE}" && exit 0 + ;; + i*86:DYNIX/ptx:4*:*) + # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. + # earlier versions are messed up and put the nodename in both + # sysname and nodename. + echo i386-sequent-sysv4 + exit 0 ;; + i*86:UNIX_SV:4.2MP:2.*) + # Unixware is an offshoot of SVR4, but it has its own version + # number series starting with 2... + # I am not positive that other SVR4 systems won't match this, + # I just have to hope. -- rms. + # Use sysv4.2uw... so that sysv4* matches it. + echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION} + exit 0 ;; + i*86:OS/2:*:*) + # If we were able to find `uname', then EMX Unix compatibility + # is probably installed. + echo ${UNAME_MACHINE}-pc-os2-emx + exit 0 ;; + i*86:XTS-300:*:STOP) + echo ${UNAME_MACHINE}-unknown-stop + exit 0 ;; + i*86:atheos:*:*) + echo ${UNAME_MACHINE}-unknown-atheos + exit 0 ;; + i*86:syllable:*:*) + echo ${UNAME_MACHINE}-pc-syllable + exit 0 ;; + i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*) + echo i386-unknown-lynxos${UNAME_RELEASE} + exit 0 ;; + i*86:*DOS:*:*) + echo ${UNAME_MACHINE}-pc-msdosdjgpp + exit 0 ;; + i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*) + UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'` + if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then + echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL} + else + echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL} + fi + exit 0 ;; + i*86:*:5:[78]*) + case `/bin/uname -X | grep "^Machine"` in + *486*) UNAME_MACHINE=i486 ;; + *Pentium) UNAME_MACHINE=i586 ;; + *Pent*|*Celeron) UNAME_MACHINE=i686 ;; + esac + echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION} + exit 0 ;; + i*86:*:3.2:*) + if test -f /usr/options/cb.name; then + UNAME_REL=`sed -n 's/.*Version //p' /dev/null >/dev/null ; then + UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')` + (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486 + (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \ + && UNAME_MACHINE=i586 + (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \ + && UNAME_MACHINE=i686 + (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \ + && UNAME_MACHINE=i686 + echo ${UNAME_MACHINE}-pc-sco$UNAME_REL + else + echo ${UNAME_MACHINE}-pc-sysv32 + fi + exit 0 ;; + pc:*:*:*) + # Left here for compatibility: + # uname -m prints for DJGPP always 'pc', but it prints nothing about + # the processor, so we play safe by assuming i386. + echo i386-pc-msdosdjgpp + exit 0 ;; + Intel:Mach:3*:*) + echo i386-pc-mach3 + exit 0 ;; + paragon:*:*:*) + echo i860-intel-osf1 + exit 0 ;; + i860:*:4.*:*) # i860-SVR4 + if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then + echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4 + else # Add other i860-SVR4 vendors below as they are discovered. + echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4 + fi + exit 0 ;; + mini*:CTIX:SYS*5:*) + # "miniframe" + echo m68010-convergent-sysv + exit 0 ;; + mc68k:UNIX:SYSTEM5:3.51m) + echo m68k-convergent-sysv + exit 0 ;; + M680?0:D-NIX:5.3:*) + echo m68k-diab-dnix + exit 0 ;; + M68*:*:R3V[5678]*:*) + test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;; + 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0) + OS_REL='' + test -r /etc/.relid \ + && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ + && echo i486-ncr-sysv4.3${OS_REL} && exit 0 + /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ + && echo i586-ncr-sysv4.3${OS_REL} && exit 0 ;; + 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*) + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ + && echo i486-ncr-sysv4 && exit 0 ;; + m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*) + echo m68k-unknown-lynxos${UNAME_RELEASE} + exit 0 ;; + mc68030:UNIX_System_V:4.*:*) + echo m68k-atari-sysv4 + exit 0 ;; + TSUNAMI:LynxOS:2.*:*) + echo sparc-unknown-lynxos${UNAME_RELEASE} + exit 0 ;; + rs6000:LynxOS:2.*:*) + echo rs6000-unknown-lynxos${UNAME_RELEASE} + exit 0 ;; + PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*) + echo powerpc-unknown-lynxos${UNAME_RELEASE} + exit 0 ;; + SM[BE]S:UNIX_SV:*:*) + echo mips-dde-sysv${UNAME_RELEASE} + exit 0 ;; + RM*:ReliantUNIX-*:*:*) + echo mips-sni-sysv4 + exit 0 ;; + RM*:SINIX-*:*:*) + echo mips-sni-sysv4 + exit 0 ;; + *:SINIX-*:*:*) + if uname -p 2>/dev/null >/dev/null ; then + UNAME_MACHINE=`(uname -p) 2>/dev/null` + echo ${UNAME_MACHINE}-sni-sysv4 + else + echo ns32k-sni-sysv + fi + exit 0 ;; + PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort + # says + echo i586-unisys-sysv4 + exit 0 ;; + *:UNIX_System_V:4*:FTX*) + # From Gerald Hewes . + # How about differentiating between stratus architectures? -djm + echo hppa1.1-stratus-sysv4 + exit 0 ;; + *:*:*:FTX*) + # From seanf@swdc.stratus.com. + echo i860-stratus-sysv4 + exit 0 ;; + i*86:VOS:*:*) + # From Paul.Green@stratus.com. + echo ${UNAME_MACHINE}-stratus-vos + exit 0 ;; + *:VOS:*:*) + # From Paul.Green@stratus.com. + echo hppa1.1-stratus-vos + exit 0 ;; + mc68*:A/UX:*:*) + echo m68k-apple-aux${UNAME_RELEASE} + exit 0 ;; + news*:NEWS-OS:6*:*) + echo mips-sony-newsos6 + exit 0 ;; + R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*) + if [ -d /usr/nec ]; then + echo mips-nec-sysv${UNAME_RELEASE} + else + echo mips-unknown-sysv${UNAME_RELEASE} + fi + exit 0 ;; + BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only. + echo powerpc-be-beos + exit 0 ;; + BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only. + echo powerpc-apple-beos + exit 0 ;; + BePC:BeOS:*:*) # BeOS running on Intel PC compatible. + echo i586-pc-beos + exit 0 ;; + SX-4:SUPER-UX:*:*) + echo sx4-nec-superux${UNAME_RELEASE} + exit 0 ;; + SX-5:SUPER-UX:*:*) + echo sx5-nec-superux${UNAME_RELEASE} + exit 0 ;; + SX-6:SUPER-UX:*:*) + echo sx6-nec-superux${UNAME_RELEASE} + exit 0 ;; + Power*:Rhapsody:*:*) + echo powerpc-apple-rhapsody${UNAME_RELEASE} + exit 0 ;; + *:Rhapsody:*:*) + echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE} + exit 0 ;; + *:Darwin:*:*) + UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown + case $UNAME_PROCESSOR in + *86) UNAME_PROCESSOR=i686 ;; + unknown) UNAME_PROCESSOR=powerpc ;; + esac + echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE} + exit 0 ;; + *:procnto*:*:* | *:QNX:[0123456789]*:*) + UNAME_PROCESSOR=`uname -p` + if test "$UNAME_PROCESSOR" = "x86"; then + UNAME_PROCESSOR=i386 + UNAME_MACHINE=pc + fi + echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE} + exit 0 ;; + *:QNX:*:4*) + echo i386-pc-qnx + exit 0 ;; + NSE-?:NONSTOP_KERNEL:*:*) + echo nse-tandem-nsk${UNAME_RELEASE} + exit 0 ;; + NSR-?:NONSTOP_KERNEL:*:*) + echo nsr-tandem-nsk${UNAME_RELEASE} + exit 0 ;; + *:NonStop-UX:*:*) + echo mips-compaq-nonstopux + exit 0 ;; + BS2000:POSIX*:*:*) + echo bs2000-siemens-sysv + exit 0 ;; + DS/*:UNIX_System_V:*:*) + echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE} + exit 0 ;; + *:Plan9:*:*) + # "uname -m" is not consistent, so use $cputype instead. 386 + # is converted to i386 for consistency with other x86 + # operating systems. + if test "$cputype" = "386"; then + UNAME_MACHINE=i386 + else + UNAME_MACHINE="$cputype" + fi + echo ${UNAME_MACHINE}-unknown-plan9 + exit 0 ;; + *:TOPS-10:*:*) + echo pdp10-unknown-tops10 + exit 0 ;; + *:TENEX:*:*) + echo pdp10-unknown-tenex + exit 0 ;; + KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*) + echo pdp10-dec-tops20 + exit 0 ;; + XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*) + echo pdp10-xkl-tops20 + exit 0 ;; + *:TOPS-20:*:*) + echo pdp10-unknown-tops20 + exit 0 ;; + *:ITS:*:*) + echo pdp10-unknown-its + exit 0 ;; + SEI:*:*:SEIUX) + echo mips-sei-seiux${UNAME_RELEASE} + exit 0 ;; + *:DragonFly:*:*) + echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` + exit 0 ;; + *:*VMS:*:*) + UNAME_MACHINE=`(uname -p) 2>/dev/null` + case "${UNAME_MACHINE}" in + A*) echo alpha-dec-vms && exit 0 ;; + I*) echo ia64-dec-vms && exit 0 ;; + V*) echo vax-dec-vms && exit 0 ;; + esac ;; + *:XENIX:*:SysV) + echo i386-pc-xenix + exit 0 ;; +esac + +#echo '(No uname command or uname output not recognized.)' 1>&2 +#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2 + +eval $set_cc_for_build +cat >$dummy.c < +# include +#endif +main () +{ +#if defined (sony) +#if defined (MIPSEB) + /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed, + I don't know.... */ + printf ("mips-sony-bsd\n"); exit (0); +#else +#include + printf ("m68k-sony-newsos%s\n", +#ifdef NEWSOS4 + "4" +#else + "" +#endif + ); exit (0); +#endif +#endif + +#if defined (__arm) && defined (__acorn) && defined (__unix) + printf ("arm-acorn-riscix"); exit (0); +#endif + +#if defined (hp300) && !defined (hpux) + printf ("m68k-hp-bsd\n"); exit (0); +#endif + +#if defined (NeXT) +#if !defined (__ARCHITECTURE__) +#define __ARCHITECTURE__ "m68k" +#endif + int version; + version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`; + if (version < 4) + printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version); + else + printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version); + exit (0); +#endif + +#if defined (MULTIMAX) || defined (n16) +#if defined (UMAXV) + printf ("ns32k-encore-sysv\n"); exit (0); +#else +#if defined (CMU) + printf ("ns32k-encore-mach\n"); exit (0); +#else + printf ("ns32k-encore-bsd\n"); exit (0); +#endif +#endif +#endif + +#if defined (__386BSD__) + printf ("i386-pc-bsd\n"); exit (0); +#endif + +#if defined (sequent) +#if defined (i386) + printf ("i386-sequent-dynix\n"); exit (0); +#endif +#if defined (ns32000) + printf ("ns32k-sequent-dynix\n"); exit (0); +#endif +#endif + +#if defined (_SEQUENT_) + struct utsname un; + + uname(&un); + + if (strncmp(un.version, "V2", 2) == 0) { + printf ("i386-sequent-ptx2\n"); exit (0); + } + if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */ + printf ("i386-sequent-ptx1\n"); exit (0); + } + printf ("i386-sequent-ptx\n"); exit (0); + +#endif + +#if defined (vax) +# if !defined (ultrix) +# include +# if defined (BSD) +# if BSD == 43 + printf ("vax-dec-bsd4.3\n"); exit (0); +# else +# if BSD == 199006 + printf ("vax-dec-bsd4.3reno\n"); exit (0); +# else + printf ("vax-dec-bsd\n"); exit (0); +# endif +# endif +# else + printf ("vax-dec-bsd\n"); exit (0); +# endif +# else + printf ("vax-dec-ultrix\n"); exit (0); +# endif +#endif + +#if defined (alliant) && defined (i860) + printf ("i860-alliant-bsd\n"); exit (0); +#endif + + exit (1); +} +EOF + +$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && $dummy && exit 0 + +# Apollos put the system type in the environment. + +test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit 0; } + +# Convex versions that predate uname can use getsysinfo(1) + +if [ -x /usr/convex/getsysinfo ] +then + case `getsysinfo -f cpu_type` in + c1*) + echo c1-convex-bsd + exit 0 ;; + c2*) + if getsysinfo -f scalar_acc + then echo c32-convex-bsd + else echo c2-convex-bsd + fi + exit 0 ;; + c34*) + echo c34-convex-bsd + exit 0 ;; + c38*) + echo c38-convex-bsd + exit 0 ;; + c4*) + echo c4-convex-bsd + exit 0 ;; + esac +fi + +cat >&2 < in order to provide the needed +information to handle your system. + +config.guess timestamp = $timestamp + +uname -m = `(uname -m) 2>/dev/null || echo unknown` +uname -r = `(uname -r) 2>/dev/null || echo unknown` +uname -s = `(uname -s) 2>/dev/null || echo unknown` +uname -v = `(uname -v) 2>/dev/null || echo unknown` + +/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null` +/bin/uname -X = `(/bin/uname -X) 2>/dev/null` + +hostinfo = `(hostinfo) 2>/dev/null` +/bin/universe = `(/bin/universe) 2>/dev/null` +/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null` +/bin/arch = `(/bin/arch) 2>/dev/null` +/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null` +/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null` + +UNAME_MACHINE = ${UNAME_MACHINE} +UNAME_RELEASE = ${UNAME_RELEASE} +UNAME_SYSTEM = ${UNAME_SYSTEM} +UNAME_VERSION = ${UNAME_VERSION} +EOF + +exit 1 + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "timestamp='" +# time-stamp-format: "%:y-%02m-%02d" +# time-stamp-end: "'" +# End: