--- fcoe-utils-1.0.9.orig/Makefile.in +++ fcoe-utils-1.0.9/Makefile.in @@ -366,40 +366,6 @@ test -n "$$list" || exit 0; \ echo " ( cd '$(DESTDIR)$(fcoe_scriptsdir)' && rm -f" $$files ")"; \ cd "$(DESTDIR)$(fcoe_scriptsdir)" && rm -f $$files -install-init_dSCRIPTS: $(init_d_SCRIPTS) - @$(NORMAL_INSTALL) - test -z "$(init_ddir)" || $(MKDIR_P) "$(DESTDIR)$(init_ddir)" - @list='$(init_d_SCRIPTS)'; test -n "$(init_ddir)" || list=; \ - for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \ - done | \ - sed -e 'p;s,.*/,,;n' \ - -e 'h;s|.*|.|' \ - -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \ - $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \ - { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ - if ($$2 == $$4) { files[d] = files[d] " " $$1; \ - if (++n[d] == $(am__install_max)) { \ - print "f", d, files[d]; n[d] = 0; files[d] = "" } } \ - else { print "f", d "/" $$4, $$1 } } \ - END { for (d in files) print "f", d, files[d] }' | \ - while read type dir files; do \ - if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ - test -z "$$files" || { \ - echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(init_ddir)$$dir'"; \ - $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(init_ddir)$$dir" || exit $$?; \ - } \ - ; done - -uninstall-init_dSCRIPTS: - @$(NORMAL_UNINSTALL) - @list='$(init_d_SCRIPTS)'; test -n "$(init_ddir)" || exit 0; \ - files=`for p in $$list; do echo "$$p"; done | \ - sed -e 's,.*/,,;$(transform)'`; \ - test -n "$$list" || exit 0; \ - echo " ( cd '$(DESTDIR)$(init_ddir)' && rm -f" $$files ")"; \ - cd "$(DESTDIR)$(init_ddir)" && rm -f $$files mostlyclean-compile: -rm -f *.$(OBJEXT) --- fcoe-utils-1.0.9.orig/debian/fcoe.upstart +++ fcoe-utils-1.0.9/debian/fcoe.upstart @@ -0,0 +1,34 @@ +description "fcoe daemon" +author "Chuck Short " + +start on runlevel [2345] +stop on runlevel [!2345] + +expect daemon +respawn + +env FCOE_CONF=/etc/fcoe/open-fcoe.conf + +pre-start script + do_modprobe() { + modprobe -q "$1" || true + } + + rm -f /var/run/fcoemon.* + modprobe libfc + modprobe fcoe +end script + +script + HBA= + fcoe_gethba() { + HBA=grep -v "#" $FCOE_CONF | grep "HBA=" | cut -f2 -d=` + if ! ifconfig $HBA &> /dev/null + then + HBA= + fi + } + + fcoe_gethba + exec /usr/sbin/fcoeadm --create $HBA +end script --- fcoe-utils-1.0.9.orig/debian/compat +++ fcoe-utils-1.0.9/debian/compat @@ -0,0 +1 @@ +7 --- fcoe-utils-1.0.9.orig/debian/copyright +++ fcoe-utils-1.0.9/debian/copyright @@ -0,0 +1,34 @@ +This work was packaged for Debian by: + + Chuck Short on Tue, 16 Feb 2010 14:46:23 -0500 + +It was downloaded from + +Upstream Author(s): + + Copyright(c) 2009 Intel Corporation. + +Copyright: + + Copyright(c) 2009 Intel Corporation. + +License: + +This program is free software; you can redistribute it and/or modify it +under the terms and conditions of the GNU General Public License, +version 2, as published by the Free Software Foundation. + +This program is distributed in the hope it will be useful, but WITHOUT +ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for +more details. + +You should have received a copy of the GNU General Public License along with +this program; if not, write to the Free Software Foundation, Inc., +51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + +The Debian packaging is: + + Copyright (C) 2010 Chuck Short + +and is licensed under the GPL version 3, see `/usr/share/common-licenses/GPL-3'. --- fcoe-utils-1.0.9.orig/debian/control +++ fcoe-utils-1.0.9/debian/control @@ -0,0 +1,15 @@ +Source: fcoe-utils +Section: misc +Priority: extra +Maintainer: Chuck Short +Build-Depends: cdbs, debhelper (>= 7), autotools-dev, libhaapi-dev, dcbd, pkg-config +Standards-Version: 3.8.3 +Homepage: http://www.open-fcoe.org + +Package: fcoe-utils +Architecture: any +Depends: ${shlibs:Depends}, ${misc:Depends} +Description: Fibre Channel over Ethernet utilities + This package allows users to use Fibre Channel over Ethernet. It contains: + fcoeadm - command line tool for configuring FCoE interfaces + coemon - service to configure DCB Ethernet QOS filters, works with dcbd --- fcoe-utils-1.0.9.orig/debian/changelog +++ fcoe-utils-1.0.9/debian/changelog @@ -0,0 +1,27 @@ +fcoe-utils (1.0.9-0ubuntu4) oneiric; urgency=low + + * Add post-autoreconf.patch: Force a refresh of the build + infrastructure; it seems that lib-link-order-ftbfs-gcc4.6.patch was + not being used correctly on the buildds, which *still* resulted in + FTBFS on amd64. (LP: #770838) + + -- Daniel T Chen Wed, 14 Sep 2011 11:23:39 -0400 + +fcoe-utils (1.0.9-0ubuntu3) oneiric; urgency=low + + * Add lib-link-order-ftbfs-gcc4.6.patch to fix incorrect use of + LDFLAGS. Fixes FTBFS. (LP: #770838) + + -- Daniel T Chen Wed, 14 Sep 2011 08:30:53 -0400 + +fcoe-utils (1.0.9-0ubuntu2) lucid; urgency=low + + * debian/crontol: Add pkg-config + + -- Chuck Short Tue, 16 Feb 2010 21:04:25 -0500 + +fcoe-utils (1.0.9-0ubuntu1) lucid; urgency=low + + * Initial release. + + -- Chuck Short Tue, 16 Feb 2010 14:46:23 -0500 --- fcoe-utils-1.0.9.orig/debian/rules +++ fcoe-utils-1.0.9/debian/rules @@ -0,0 +1,11 @@ +#!/usr/bin/make -f + +DEB_DH_INSTALLINIT_ARGS := --upstart-only + +include /usr/share/cdbs/1/rules/debhelper.mk +include /usr/share/cdbs/1/rules/simple-patchsys.mk +include /usr/share/cdbs/1/class/autotools.mk + +binary-install/fcoe-utils:: + mkdir -p debian/fcoe-utils/etc/init + install -o root -g root -m 644 debian/fcoe.upstart debian/fcoe-utils/etc/init/fcoe.conf --- fcoe-utils-1.0.9.orig/debian/docs +++ fcoe-utils-1.0.9/debian/docs @@ -0,0 +1,2 @@ +README +QUICKSTART --- fcoe-utils-1.0.9.orig/debian/patches/lib-link-order-ftbfs-gcc4.6.patch +++ fcoe-utils-1.0.9/debian/patches/lib-link-order-ftbfs-gcc4.6.patch @@ -0,0 +1,21 @@ +diff -Nur -x '*.orig' -x '*~' fcoe-utils-1.0.9//Makefile.am fcoe-utils-1.0.9.new//Makefile.am +--- fcoe-utils-1.0.9//Makefile.am 2009-12-17 14:49:24.000000000 -0500 ++++ fcoe-utils-1.0.9.new//Makefile.am 2011-09-14 08:33:38.000000000 -0400 +@@ -17,7 +17,7 @@ + + ## fcoeadm uses HBAAPI, so get the right flags for compiling and linking + fcoeadm_CFLAGS = $(HBAAPI_CFLAGS) +-fcoeadm_LDFLAGS = $(HBAAPI_LIBS) ++fcoeadm_LDADD = $(HBAAPI_LIBS) + + ## rules for building fcping + ## only listed sources get packaged, so must list all headers too +@@ -34,7 +34,7 @@ + + ## fcoemon needs headers from dcbd, get the right include path for them + fcoemon_CFLAGS = $(DCBD_CFLAGS) +-fcoemon_LDFLAGS = -lrt ++fcoemon_LDADD = -lrt + + ## rules for building fipvlan + ## only listed sources get packaged, so must list all headers too --- fcoe-utils-1.0.9.orig/debian/patches/post-autoreconf.patch +++ fcoe-utils-1.0.9/debian/patches/post-autoreconf.patch @@ -0,0 +1,13116 @@ +diff -Nur -x '*.orig' -x '*~' fcoe-utils-1.0.9//aclocal.m4 fcoe-utils-1.0.9.new//aclocal.m4 +--- fcoe-utils-1.0.9//aclocal.m4 2010-02-16 14:43:05.000000000 -0500 ++++ fcoe-utils-1.0.9.new//aclocal.m4 2011-09-14 11:57:04.000000000 -0400 +@@ -13,13 +13,14 @@ + + m4_ifndef([AC_AUTOCONF_VERSION], + [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl +-m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.65],, +-[m4_warning([this file was generated for autoconf 2.65. ++m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.68],, ++[m4_warning([this file was generated for autoconf 2.68. + You have another version of autoconf. It may work, but is not guaranteed to. + If you have problems, you may need to regenerate the build system entirely. + To do so, use the procedure documented by the package, typically `autoreconf'.])]) + + # pkg.m4 - Macros to locate and utilise pkg-config. -*- Autoconf -*- ++# serial 1 (pkg-config-0.24) + # + # Copyright © 2004 Scott James Remnant . + # +@@ -46,8 +47,12 @@ + # ---------------------------------- + AC_DEFUN([PKG_PROG_PKG_CONFIG], + [m4_pattern_forbid([^_?PKG_[A-Z_]+$]) +-m4_pattern_allow([^PKG_CONFIG(_PATH)?$]) +-AC_ARG_VAR([PKG_CONFIG], [path to pkg-config utility])dnl ++m4_pattern_allow([^PKG_CONFIG(_(PATH|LIBDIR|SYSROOT_DIR|ALLOW_SYSTEM_(CFLAGS|LIBS)))?$]) ++m4_pattern_allow([^PKG_CONFIG_(DISABLE_UNINSTALLED|TOP_BUILD_DIR|DEBUG_SPEW)$]) ++AC_ARG_VAR([PKG_CONFIG], [path to pkg-config utility]) ++AC_ARG_VAR([PKG_CONFIG_PATH], [directories to add to pkg-config's search path]) ++AC_ARG_VAR([PKG_CONFIG_LIBDIR], [path overriding pkg-config's built-in search path]) ++ + if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then + AC_PATH_TOOL([PKG_CONFIG], [pkg-config]) + fi +@@ -60,7 +65,6 @@ + AC_MSG_RESULT([no]) + PKG_CONFIG="" + fi +- + fi[]dnl + ])# PKG_PROG_PKG_CONFIG + +@@ -69,34 +73,32 @@ + # Check to see whether a particular set of modules exists. Similar + # to PKG_CHECK_MODULES(), but does not set variables or print errors. + # +-# +-# Similar to PKG_CHECK_MODULES, make sure that the first instance of +-# this or PKG_CHECK_MODULES is called, or make sure to call +-# PKG_CHECK_EXISTS manually ++# Please remember that m4 expands AC_REQUIRE([PKG_PROG_PKG_CONFIG]) ++# only at the first occurence in configure.ac, so if the first place ++# it's called might be skipped (such as if it is within an "if", you ++# have to call PKG_CHECK_EXISTS manually + # -------------------------------------------------------------- + AC_DEFUN([PKG_CHECK_EXISTS], + [AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl + if test -n "$PKG_CONFIG" && \ + AC_RUN_LOG([$PKG_CONFIG --exists --print-errors "$1"]); then +- m4_ifval([$2], [$2], [:]) ++ m4_default([$2], [:]) + m4_ifvaln([$3], [else + $3])dnl + fi]) + +- + # _PKG_CONFIG([VARIABLE], [COMMAND], [MODULES]) + # --------------------------------------------- + m4_define([_PKG_CONFIG], +-[if test -n "$PKG_CONFIG"; then +- if test -n "$$1"; then +- pkg_cv_[]$1="$$1" +- else +- PKG_CHECK_EXISTS([$3], +- [pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null`], +- [pkg_failed=yes]) +- fi +-else +- pkg_failed=untried ++[if test -n "$$1"; then ++ pkg_cv_[]$1="$$1" ++ elif test -n "$PKG_CONFIG"; then ++ PKG_CHECK_EXISTS([$3], ++ [pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null` ++ test "x$?" != "x0" && pkg_failed=yes ], ++ [pkg_failed=yes]) ++ else ++ pkg_failed=untried + fi[]dnl + ])# _PKG_CONFIG + +@@ -138,16 +140,17 @@ + See the pkg-config man page for more details.]) + + if test $pkg_failed = yes; then ++ AC_MSG_RESULT([no]) + _PKG_SHORT_ERRORS_SUPPORTED + if test $_pkg_short_errors_supported = yes; then +- $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "$2"` ++ $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "$2" 2>&1` + else +- $1[]_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "$2"` ++ $1[]_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "$2" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$$1[]_PKG_ERRORS" >&AS_MESSAGE_LOG_FD + +- ifelse([$4], , [AC_MSG_ERROR(dnl ++ m4_default([$4], [AC_MSG_ERROR( + [Package requirements ($2) were not met: + + $$1_PKG_ERRORS +@@ -155,25 +158,24 @@ + Consider adjusting the PKG_CONFIG_PATH environment variable if you + installed software in a non-standard prefix. + +-_PKG_TEXT +-])], +- [AC_MSG_RESULT([no]) +- $4]) ++_PKG_TEXT])[]dnl ++ ]) + elif test $pkg_failed = untried; then +- ifelse([$4], , [AC_MSG_FAILURE(dnl ++ AC_MSG_RESULT([no]) ++ m4_default([$4], [AC_MSG_FAILURE( + [The pkg-config script could not be found or is too old. Make sure it + is in your PATH or set the PKG_CONFIG environment variable to the full + path to pkg-config. + + _PKG_TEXT + +-To get pkg-config, see .])], +- [$4]) ++To get pkg-config, see .])[]dnl ++ ]) + else + $1[]_CFLAGS=$pkg_cv_[]$1[]_CFLAGS + $1[]_LIBS=$pkg_cv_[]$1[]_LIBS + AC_MSG_RESULT([yes]) +- ifelse([$3], , :, [$3]) ++ $3 + fi[]dnl + ])# PKG_CHECK_MODULES + +diff -Nur -x '*.orig' -x '*~' fcoe-utils-1.0.9//autom4te.cache/output.0 fcoe-utils-1.0.9.new//autom4te.cache/output.0 +--- fcoe-utils-1.0.9//autom4te.cache/output.0 1969-12-31 19:00:00.000000000 -0500 ++++ fcoe-utils-1.0.9.new//autom4te.cache/output.0 2011-09-14 11:57:04.000000000 -0400 +@@ -0,0 +1,5049 @@ ++@%:@! /bin/sh ++@%:@ Guess values for system-dependent variables and create Makefiles. ++@%:@ Generated by GNU Autoconf 2.68 for fcoe-utils 1.0.9. ++@%:@ ++@%:@ Report bugs to . ++@%:@ ++@%:@ ++@%:@ Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, ++@%:@ 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software ++@%:@ Foundation, Inc. ++@%:@ ++@%:@ ++@%:@ This configure script is free software; the Free Software Foundation ++@%:@ gives unlimited permission to copy, distribute and modify it. ++## -------------------- ## ++## M4sh Initialization. ## ++## -------------------- ## ++ ++# Be more Bourne compatible ++DUALCASE=1; export DUALCASE # for MKS sh ++if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : ++ emulate sh ++ NULLCMD=: ++ # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which ++ # is contrary to our usage. Disable this feature. ++ alias -g '${1+"$@"}'='"$@"' ++ setopt NO_GLOB_SUBST ++else ++ case `(set -o) 2>/dev/null` in @%:@( ++ *posix*) : ++ set -o posix ;; @%:@( ++ *) : ++ ;; ++esac ++fi ++ ++ ++as_nl=' ++' ++export as_nl ++# Printing a long string crashes Solaris 7 /usr/bin/printf. ++as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' ++as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo ++as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo ++# Prefer a ksh shell builtin over an external printf program on Solaris, ++# but without wasting forks for bash or zsh. ++if test -z "$BASH_VERSION$ZSH_VERSION" \ ++ && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then ++ as_echo='print -r --' ++ as_echo_n='print -rn --' ++elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then ++ as_echo='printf %s\n' ++ as_echo_n='printf %s' ++else ++ if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then ++ as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' ++ as_echo_n='/usr/ucb/echo -n' ++ else ++ as_echo_body='eval expr "X$1" : "X\\(.*\\)"' ++ as_echo_n_body='eval ++ arg=$1; ++ case $arg in @%:@( ++ *"$as_nl"*) ++ expr "X$arg" : "X\\(.*\\)$as_nl"; ++ arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; ++ esac; ++ expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" ++ ' ++ export as_echo_n_body ++ as_echo_n='sh -c $as_echo_n_body as_echo' ++ fi ++ export as_echo_body ++ as_echo='sh -c $as_echo_body as_echo' ++fi ++ ++# The user is always right. ++if test "${PATH_SEPARATOR+set}" != set; then ++ PATH_SEPARATOR=: ++ (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { ++ (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || ++ PATH_SEPARATOR=';' ++ } ++fi ++ ++ ++# IFS ++# We need space, tab and new line, in precisely that order. Quoting is ++# there to prevent editors from complaining about space-tab. ++# (If _AS_PATH_WALK were called with IFS unset, it would disable word ++# splitting by setting IFS to empty value.) ++IFS=" "" $as_nl" ++ ++# Find who we are. Look in the path if we contain no directory separator. ++as_myself= ++case $0 in @%:@(( ++ *[\\/]* ) as_myself=$0 ;; ++ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break ++ done ++IFS=$as_save_IFS ++ ++ ;; ++esac ++# We did not find ourselves, most probably we were run as `sh COMMAND' ++# in which case we are not to be found in the path. ++if test "x$as_myself" = x; then ++ as_myself=$0 ++fi ++if test ! -f "$as_myself"; then ++ $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 ++ exit 1 ++fi ++ ++# Unset variables that we do not need and which cause bugs (e.g. in ++# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" ++# suppresses any "Segmentation fault" message there. '((' could ++# trigger a bug in pdksh 5.2.14. ++for as_var in BASH_ENV ENV MAIL MAILPATH ++do eval test x\${$as_var+set} = xset \ ++ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : ++done ++PS1='$ ' ++PS2='> ' ++PS4='+ ' ++ ++# NLS nuisances. ++LC_ALL=C ++export LC_ALL ++LANGUAGE=C ++export LANGUAGE ++ ++# CDPATH. ++(unset CDPATH) >/dev/null 2>&1 && unset CDPATH ++ ++if test "x$CONFIG_SHELL" = x; then ++ as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then : ++ emulate sh ++ NULLCMD=: ++ # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which ++ # is contrary to our usage. Disable this feature. ++ alias -g '\${1+\"\$@\"}'='\"\$@\"' ++ setopt NO_GLOB_SUBST ++else ++ case \`(set -o) 2>/dev/null\` in @%:@( ++ *posix*) : ++ set -o posix ;; @%:@( ++ *) : ++ ;; ++esac ++fi ++" ++ as_required="as_fn_return () { (exit \$1); } ++as_fn_success () { as_fn_return 0; } ++as_fn_failure () { as_fn_return 1; } ++as_fn_ret_success () { return 0; } ++as_fn_ret_failure () { return 1; } ++ ++exitcode=0 ++as_fn_success || { exitcode=1; echo as_fn_success failed.; } ++as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; } ++as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; } ++as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; } ++if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then : ++ ++else ++ exitcode=1; echo positional parameters were not saved. ++fi ++test x\$exitcode = x0 || exit 1" ++ as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO ++ as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO ++ eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" && ++ test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1" ++ if (eval "$as_required") 2>/dev/null; then : ++ as_have_required=yes ++else ++ as_have_required=no ++fi ++ if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then : ++ ++else ++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++as_found=false ++for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ as_found=: ++ case $as_dir in @%:@( ++ /*) ++ for as_base in sh bash ksh sh5; do ++ # Try only shells that exist, to save several forks. ++ as_shell=$as_dir/$as_base ++ if { test -f "$as_shell" || test -f "$as_shell.exe"; } && ++ { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then : ++ CONFIG_SHELL=$as_shell as_have_required=yes ++ if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then : ++ break 2 ++fi ++fi ++ done;; ++ esac ++ as_found=false ++done ++$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } && ++ { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then : ++ CONFIG_SHELL=$SHELL as_have_required=yes ++fi; } ++IFS=$as_save_IFS ++ ++ ++ if test "x$CONFIG_SHELL" != x; then : ++ # We cannot yet assume a decent shell, so we have to provide a ++ # neutralization value for shells without unset; and this also ++ # works around shells that cannot unset nonexistent variables. ++ # Preserve -v and -x to the replacement shell. ++ BASH_ENV=/dev/null ++ ENV=/dev/null ++ (unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV ++ export CONFIG_SHELL ++ case $- in @%:@ (((( ++ *v*x* | *x*v* ) as_opts=-vx ;; ++ *v* ) as_opts=-v ;; ++ *x* ) as_opts=-x ;; ++ * ) as_opts= ;; ++ esac ++ exec "$CONFIG_SHELL" $as_opts "$as_myself" ${1+"$@"} ++fi ++ ++ if test x$as_have_required = xno; then : ++ $as_echo "$0: This script requires a shell more modern than all" ++ $as_echo "$0: the shells that I found on your system." ++ if test x${ZSH_VERSION+set} = xset ; then ++ $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should" ++ $as_echo "$0: be upgraded to zsh 4.3.4 or later." ++ else ++ $as_echo "$0: Please tell bug-autoconf@gnu.org and ++$0: devel@open-fcoe.org about your system, including any ++$0: error possibly output before this message. Then install ++$0: a modern shell, or manually run the script under such a ++$0: shell if you do have one." ++ fi ++ exit 1 ++fi ++fi ++fi ++SHELL=${CONFIG_SHELL-/bin/sh} ++export SHELL ++# Unset more variables known to interfere with behavior of common tools. ++CLICOLOR_FORCE= GREP_OPTIONS= ++unset CLICOLOR_FORCE GREP_OPTIONS ++ ++## --------------------- ## ++## M4sh Shell Functions. ## ++## --------------------- ## ++@%:@ as_fn_unset VAR ++@%:@ --------------- ++@%:@ Portably unset VAR. ++as_fn_unset () ++{ ++ { eval $1=; unset $1;} ++} ++as_unset=as_fn_unset ++ ++@%:@ as_fn_set_status STATUS ++@%:@ ----------------------- ++@%:@ Set @S|@? to STATUS, without forking. ++as_fn_set_status () ++{ ++ return $1 ++} @%:@ as_fn_set_status ++ ++@%:@ as_fn_exit STATUS ++@%:@ ----------------- ++@%:@ Exit the shell with STATUS, even in a "trap 0" or "set -e" context. ++as_fn_exit () ++{ ++ set +e ++ as_fn_set_status $1 ++ exit $1 ++} @%:@ as_fn_exit ++ ++@%:@ as_fn_mkdir_p ++@%:@ ------------- ++@%:@ Create "@S|@as_dir" as a directory, including parents if necessary. ++as_fn_mkdir_p () ++{ ++ ++ case $as_dir in #( ++ -*) as_dir=./$as_dir;; ++ esac ++ test -d "$as_dir" || eval $as_mkdir_p || { ++ as_dirs= ++ while :; do ++ case $as_dir in #( ++ *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( ++ *) as_qdir=$as_dir;; ++ esac ++ as_dirs="'$as_qdir' $as_dirs" ++ as_dir=`$as_dirname -- "$as_dir" || ++$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ ++ X"$as_dir" : 'X\(//\)[^/]' \| \ ++ X"$as_dir" : 'X\(//\)$' \| \ ++ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || ++$as_echo X"$as_dir" | ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)[^/].*/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` ++ test -d "$as_dir" && break ++ done ++ test -z "$as_dirs" || eval "mkdir $as_dirs" ++ } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" ++ ++ ++} @%:@ as_fn_mkdir_p ++@%:@ as_fn_append VAR VALUE ++@%:@ ---------------------- ++@%:@ Append the text in VALUE to the end of the definition contained in VAR. Take ++@%:@ advantage of any shell optimizations that allow amortized linear growth over ++@%:@ repeated appends, instead of the typical quadratic growth present in naive ++@%:@ implementations. ++if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : ++ eval 'as_fn_append () ++ { ++ eval $1+=\$2 ++ }' ++else ++ as_fn_append () ++ { ++ eval $1=\$$1\$2 ++ } ++fi # as_fn_append ++ ++@%:@ as_fn_arith ARG... ++@%:@ ------------------ ++@%:@ Perform arithmetic evaluation on the ARGs, and store the result in the ++@%:@ global @S|@as_val. Take advantage of shells that can avoid forks. The arguments ++@%:@ must be portable across @S|@(()) and expr. ++if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : ++ eval 'as_fn_arith () ++ { ++ as_val=$(( $* )) ++ }' ++else ++ as_fn_arith () ++ { ++ as_val=`expr "$@" || test $? -eq 1` ++ } ++fi # as_fn_arith ++ ++ ++@%:@ as_fn_error STATUS ERROR [LINENO LOG_FD] ++@%:@ ---------------------------------------- ++@%:@ Output "`basename @S|@0`: error: ERROR" to stderr. If LINENO and LOG_FD are ++@%:@ provided, also output the error to LOG_FD, referencing LINENO. Then exit the ++@%:@ script with STATUS, using 1 if that was 0. ++as_fn_error () ++{ ++ as_status=$1; test $as_status -eq 0 && as_status=1 ++ if test "$4"; then ++ as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack ++ $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 ++ fi ++ $as_echo "$as_me: error: $2" >&2 ++ as_fn_exit $as_status ++} @%:@ as_fn_error ++ ++if expr a : '\(a\)' >/dev/null 2>&1 && ++ test "X`expr 00001 : '.*\(...\)'`" = X001; then ++ as_expr=expr ++else ++ as_expr=false ++fi ++ ++if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then ++ as_basename=basename ++else ++ as_basename=false ++fi ++ ++if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then ++ as_dirname=dirname ++else ++ as_dirname=false ++fi ++ ++as_me=`$as_basename -- "$0" || ++$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ ++ X"$0" : 'X\(//\)$' \| \ ++ X"$0" : 'X\(/\)' \| . 2>/dev/null || ++$as_echo X/"$0" | ++ sed '/^.*\/\([^/][^/]*\)\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\/\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\/\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` ++ ++# Avoid depending upon Character Ranges. ++as_cr_letters='abcdefghijklmnopqrstuvwxyz' ++as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' ++as_cr_Letters=$as_cr_letters$as_cr_LETTERS ++as_cr_digits='0123456789' ++as_cr_alnum=$as_cr_Letters$as_cr_digits ++ ++ ++ as_lineno_1=$LINENO as_lineno_1a=$LINENO ++ as_lineno_2=$LINENO as_lineno_2a=$LINENO ++ eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" && ++ test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || { ++ # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-) ++ sed -n ' ++ p ++ /[$]LINENO/= ++ ' <$as_myself | ++ sed ' ++ s/[$]LINENO.*/&-/ ++ t lineno ++ b ++ :lineno ++ N ++ :loop ++ s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ ++ t loop ++ s/-\n.*// ++ ' >$as_me.lineno && ++ chmod +x "$as_me.lineno" || ++ { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; } ++ ++ # Don't try to exec as it changes $[0], causing all sort of problems ++ # (the dirname of $[0] is not the place where we might find the ++ # original and so on. Autoconf is especially sensitive to this). ++ . "./$as_me.lineno" ++ # Exit status is that of the last command. ++ exit ++} ++ ++ECHO_C= ECHO_N= ECHO_T= ++case `echo -n x` in @%:@((((( ++-n*) ++ case `echo 'xy\c'` in ++ *c*) ECHO_T=' ';; # ECHO_T is single tab character. ++ xy) ECHO_C='\c';; ++ *) echo `echo ksh88 bug on AIX 6.1` > /dev/null ++ ECHO_T=' ';; ++ esac;; ++*) ++ ECHO_N='-n';; ++esac ++ ++rm -f conf$$ conf$$.exe conf$$.file ++if test -d conf$$.dir; then ++ rm -f conf$$.dir/conf$$.file ++else ++ rm -f conf$$.dir ++ mkdir conf$$.dir 2>/dev/null ++fi ++if (echo >conf$$.file) 2>/dev/null; then ++ if ln -s conf$$.file conf$$ 2>/dev/null; then ++ as_ln_s='ln -s' ++ # ... but there are two gotchas: ++ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. ++ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. ++ # In both cases, we have to default to `cp -p'. ++ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || ++ as_ln_s='cp -p' ++ elif ln conf$$.file conf$$ 2>/dev/null; then ++ as_ln_s=ln ++ else ++ as_ln_s='cp -p' ++ fi ++else ++ as_ln_s='cp -p' ++fi ++rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file ++rmdir conf$$.dir 2>/dev/null ++ ++if mkdir -p . 2>/dev/null; then ++ as_mkdir_p='mkdir -p "$as_dir"' ++else ++ test -d ./-p && rmdir ./-p ++ as_mkdir_p=false ++fi ++ ++if test -x / >/dev/null 2>&1; then ++ as_test_x='test -x' ++else ++ if ls -dL / >/dev/null 2>&1; then ++ as_ls_L_option=L ++ else ++ as_ls_L_option= ++ fi ++ as_test_x=' ++ eval sh -c '\'' ++ if test -d "$1"; then ++ test -d "$1/."; ++ else ++ case $1 in @%:@( ++ -*)set "./$1";; ++ esac; ++ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in @%:@(( ++ ???[sx]*):;;*)false;;esac;fi ++ '\'' sh ++ ' ++fi ++as_executable_p=$as_test_x ++ ++# Sed expression to map a string onto a valid CPP name. ++as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" ++ ++# Sed expression to map a string onto a valid variable name. ++as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" ++ ++ ++test -n "$DJDIR" || exec 7<&0 &1 ++ ++# Name of the host. ++# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status, ++# so uname gets run too. ++ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` ++ ++# ++# Initializations. ++# ++ac_default_prefix=/usr/local ++ac_clean_files= ++ac_config_libobj_dir=. ++LIB@&t@OBJS= ++cross_compiling=no ++subdirs= ++MFLAGS= ++MAKEFLAGS= ++ ++# Identity of this package. ++PACKAGE_NAME='fcoe-utils' ++PACKAGE_TARNAME='fcoe-utils' ++PACKAGE_VERSION='1.0.9' ++PACKAGE_STRING='fcoe-utils 1.0.9' ++PACKAGE_BUGREPORT='devel@open-fcoe.org' ++PACKAGE_URL='' ++ ++ac_subst_vars='am__EXEEXT_FALSE ++am__EXEEXT_TRUE ++LTLIBOBJS ++LIB@&t@OBJS ++DCBD_LIBS ++DCBD_CFLAGS ++WITH_DCB_FALSE ++WITH_DCB_TRUE ++HBAAPI_LIBS ++HBAAPI_CFLAGS ++PKG_CONFIG_LIBDIR ++PKG_CONFIG_PATH ++PKG_CONFIG ++am__fastdepCC_FALSE ++am__fastdepCC_TRUE ++CCDEPMODE ++AMDEPBACKSLASH ++AMDEP_FALSE ++AMDEP_TRUE ++am__quote ++am__include ++DEPDIR ++OBJEXT ++EXEEXT ++ac_ct_CC ++CPPFLAGS ++LDFLAGS ++CFLAGS ++CC ++am__untar ++am__tar ++AMTAR ++am__leading_dot ++SET_MAKE ++AWK ++mkdir_p ++MKDIR_P ++INSTALL_STRIP_PROGRAM ++STRIP ++install_sh ++MAKEINFO ++AUTOHEADER ++AUTOMAKE ++AUTOCONF ++ACLOCAL ++VERSION ++PACKAGE ++CYGPATH_W ++am__isrc ++INSTALL_DATA ++INSTALL_SCRIPT ++INSTALL_PROGRAM ++target_alias ++host_alias ++build_alias ++LIBS ++ECHO_T ++ECHO_N ++ECHO_C ++DEFS ++mandir ++localedir ++libdir ++psdir ++pdfdir ++dvidir ++htmldir ++infodir ++docdir ++oldincludedir ++includedir ++localstatedir ++sharedstatedir ++sysconfdir ++datadir ++datarootdir ++libexecdir ++sbindir ++bindir ++program_transform_name ++prefix ++exec_prefix ++PACKAGE_URL ++PACKAGE_BUGREPORT ++PACKAGE_STRING ++PACKAGE_VERSION ++PACKAGE_TARNAME ++PACKAGE_NAME ++PATH_SEPARATOR ++SHELL' ++ac_subst_files='' ++ac_user_opts=' ++enable_option_checking ++enable_dependency_tracking ++with_dcb ++' ++ ac_precious_vars='build_alias ++host_alias ++target_alias ++CC ++CFLAGS ++LDFLAGS ++LIBS ++CPPFLAGS ++PKG_CONFIG ++PKG_CONFIG_PATH ++PKG_CONFIG_LIBDIR ++HBAAPI_CFLAGS ++HBAAPI_LIBS ++DCBD_CFLAGS ++DCBD_LIBS' ++ ++ ++# Initialize some variables set by options. ++ac_init_help= ++ac_init_version=false ++ac_unrecognized_opts= ++ac_unrecognized_sep= ++# The variables have the same names as the options, with ++# dashes changed to underlines. ++cache_file=/dev/null ++exec_prefix=NONE ++no_create= ++no_recursion= ++prefix=NONE ++program_prefix=NONE ++program_suffix=NONE ++program_transform_name=s,x,x, ++silent= ++site= ++srcdir= ++verbose= ++x_includes=NONE ++x_libraries=NONE ++ ++# Installation directory options. ++# These are left unexpanded so users can "make install exec_prefix=/foo" ++# and all the variables that are supposed to be based on exec_prefix ++# by default will actually change. ++# Use braces instead of parens because sh, perl, etc. also accept them. ++# (The list follows the same order as the GNU Coding Standards.) ++bindir='${exec_prefix}/bin' ++sbindir='${exec_prefix}/sbin' ++libexecdir='${exec_prefix}/libexec' ++datarootdir='${prefix}/share' ++datadir='${datarootdir}' ++sysconfdir='${prefix}/etc' ++sharedstatedir='${prefix}/com' ++localstatedir='${prefix}/var' ++includedir='${prefix}/include' ++oldincludedir='/usr/include' ++docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' ++infodir='${datarootdir}/info' ++htmldir='${docdir}' ++dvidir='${docdir}' ++pdfdir='${docdir}' ++psdir='${docdir}' ++libdir='${exec_prefix}/lib' ++localedir='${datarootdir}/locale' ++mandir='${datarootdir}/man' ++ ++ac_prev= ++ac_dashdash= ++for ac_option ++do ++ # If the previous option needs an argument, assign it. ++ if test -n "$ac_prev"; then ++ eval $ac_prev=\$ac_option ++ ac_prev= ++ continue ++ fi ++ ++ case $ac_option in ++ *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; ++ *=) ac_optarg= ;; ++ *) ac_optarg=yes ;; ++ esac ++ ++ # Accept the important Cygnus configure options, so we can diagnose typos. ++ ++ case $ac_dashdash$ac_option in ++ --) ++ ac_dashdash=yes ;; ++ ++ -bindir | --bindir | --bindi | --bind | --bin | --bi) ++ ac_prev=bindir ;; ++ -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) ++ bindir=$ac_optarg ;; ++ ++ -build | --build | --buil | --bui | --bu) ++ ac_prev=build_alias ;; ++ -build=* | --build=* | --buil=* | --bui=* | --bu=*) ++ build_alias=$ac_optarg ;; ++ ++ -cache-file | --cache-file | --cache-fil | --cache-fi \ ++ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) ++ ac_prev=cache_file ;; ++ -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ ++ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) ++ cache_file=$ac_optarg ;; ++ ++ --config-cache | -C) ++ cache_file=config.cache ;; ++ ++ -datadir | --datadir | --datadi | --datad) ++ ac_prev=datadir ;; ++ -datadir=* | --datadir=* | --datadi=* | --datad=*) ++ datadir=$ac_optarg ;; ++ ++ -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ ++ | --dataroo | --dataro | --datar) ++ ac_prev=datarootdir ;; ++ -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ ++ | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) ++ datarootdir=$ac_optarg ;; ++ ++ -disable-* | --disable-*) ++ ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` ++ # Reject names that are not valid shell variable names. ++ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && ++ as_fn_error $? "invalid feature name: $ac_useropt" ++ ac_useropt_orig=$ac_useropt ++ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` ++ case $ac_user_opts in ++ *" ++"enable_$ac_useropt" ++"*) ;; ++ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig" ++ ac_unrecognized_sep=', ';; ++ esac ++ eval enable_$ac_useropt=no ;; ++ ++ -docdir | --docdir | --docdi | --doc | --do) ++ ac_prev=docdir ;; ++ -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) ++ docdir=$ac_optarg ;; ++ ++ -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) ++ ac_prev=dvidir ;; ++ -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) ++ dvidir=$ac_optarg ;; ++ ++ -enable-* | --enable-*) ++ ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` ++ # Reject names that are not valid shell variable names. ++ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && ++ as_fn_error $? "invalid feature name: $ac_useropt" ++ ac_useropt_orig=$ac_useropt ++ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` ++ case $ac_user_opts in ++ *" ++"enable_$ac_useropt" ++"*) ;; ++ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig" ++ ac_unrecognized_sep=', ';; ++ esac ++ eval enable_$ac_useropt=\$ac_optarg ;; ++ ++ -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ ++ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ ++ | --exec | --exe | --ex) ++ ac_prev=exec_prefix ;; ++ -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ ++ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ ++ | --exec=* | --exe=* | --ex=*) ++ exec_prefix=$ac_optarg ;; ++ ++ -gas | --gas | --ga | --g) ++ # Obsolete; use --with-gas. ++ with_gas=yes ;; ++ ++ -help | --help | --hel | --he | -h) ++ ac_init_help=long ;; ++ -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) ++ ac_init_help=recursive ;; ++ -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) ++ ac_init_help=short ;; ++ ++ -host | --host | --hos | --ho) ++ ac_prev=host_alias ;; ++ -host=* | --host=* | --hos=* | --ho=*) ++ host_alias=$ac_optarg ;; ++ ++ -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) ++ ac_prev=htmldir ;; ++ -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ ++ | --ht=*) ++ htmldir=$ac_optarg ;; ++ ++ -includedir | --includedir | --includedi | --included | --include \ ++ | --includ | --inclu | --incl | --inc) ++ ac_prev=includedir ;; ++ -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ ++ | --includ=* | --inclu=* | --incl=* | --inc=*) ++ includedir=$ac_optarg ;; ++ ++ -infodir | --infodir | --infodi | --infod | --info | --inf) ++ ac_prev=infodir ;; ++ -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) ++ infodir=$ac_optarg ;; ++ ++ -libdir | --libdir | --libdi | --libd) ++ ac_prev=libdir ;; ++ -libdir=* | --libdir=* | --libdi=* | --libd=*) ++ libdir=$ac_optarg ;; ++ ++ -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ ++ | --libexe | --libex | --libe) ++ ac_prev=libexecdir ;; ++ -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ ++ | --libexe=* | --libex=* | --libe=*) ++ libexecdir=$ac_optarg ;; ++ ++ -localedir | --localedir | --localedi | --localed | --locale) ++ ac_prev=localedir ;; ++ -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) ++ localedir=$ac_optarg ;; ++ ++ -localstatedir | --localstatedir | --localstatedi | --localstated \ ++ | --localstate | --localstat | --localsta | --localst | --locals) ++ ac_prev=localstatedir ;; ++ -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ ++ | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) ++ localstatedir=$ac_optarg ;; ++ ++ -mandir | --mandir | --mandi | --mand | --man | --ma | --m) ++ ac_prev=mandir ;; ++ -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) ++ mandir=$ac_optarg ;; ++ ++ -nfp | --nfp | --nf) ++ # Obsolete; use --without-fp. ++ with_fp=no ;; ++ ++ -no-create | --no-create | --no-creat | --no-crea | --no-cre \ ++ | --no-cr | --no-c | -n) ++ no_create=yes ;; ++ ++ -no-recursion | --no-recursion | --no-recursio | --no-recursi \ ++ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ++ no_recursion=yes ;; ++ ++ -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ ++ | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ ++ | --oldin | --oldi | --old | --ol | --o) ++ ac_prev=oldincludedir ;; ++ -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ ++ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ ++ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) ++ oldincludedir=$ac_optarg ;; ++ ++ -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) ++ ac_prev=prefix ;; ++ -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) ++ prefix=$ac_optarg ;; ++ ++ -program-prefix | --program-prefix | --program-prefi | --program-pref \ ++ | --program-pre | --program-pr | --program-p) ++ ac_prev=program_prefix ;; ++ -program-prefix=* | --program-prefix=* | --program-prefi=* \ ++ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) ++ program_prefix=$ac_optarg ;; ++ ++ -program-suffix | --program-suffix | --program-suffi | --program-suff \ ++ | --program-suf | --program-su | --program-s) ++ ac_prev=program_suffix ;; ++ -program-suffix=* | --program-suffix=* | --program-suffi=* \ ++ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) ++ program_suffix=$ac_optarg ;; ++ ++ -program-transform-name | --program-transform-name \ ++ | --program-transform-nam | --program-transform-na \ ++ | --program-transform-n | --program-transform- \ ++ | --program-transform | --program-transfor \ ++ | --program-transfo | --program-transf \ ++ | --program-trans | --program-tran \ ++ | --progr-tra | --program-tr | --program-t) ++ ac_prev=program_transform_name ;; ++ -program-transform-name=* | --program-transform-name=* \ ++ | --program-transform-nam=* | --program-transform-na=* \ ++ | --program-transform-n=* | --program-transform-=* \ ++ | --program-transform=* | --program-transfor=* \ ++ | --program-transfo=* | --program-transf=* \ ++ | --program-trans=* | --program-tran=* \ ++ | --progr-tra=* | --program-tr=* | --program-t=*) ++ program_transform_name=$ac_optarg ;; ++ ++ -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) ++ ac_prev=pdfdir ;; ++ -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) ++ pdfdir=$ac_optarg ;; ++ ++ -psdir | --psdir | --psdi | --psd | --ps) ++ ac_prev=psdir ;; ++ -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) ++ psdir=$ac_optarg ;; ++ ++ -q | -quiet | --quiet | --quie | --qui | --qu | --q \ ++ | -silent | --silent | --silen | --sile | --sil) ++ silent=yes ;; ++ ++ -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) ++ ac_prev=sbindir ;; ++ -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ ++ | --sbi=* | --sb=*) ++ sbindir=$ac_optarg ;; ++ ++ -sharedstatedir | --sharedstatedir | --sharedstatedi \ ++ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ ++ | --sharedst | --shareds | --shared | --share | --shar \ ++ | --sha | --sh) ++ ac_prev=sharedstatedir ;; ++ -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ ++ | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ ++ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ ++ | --sha=* | --sh=*) ++ sharedstatedir=$ac_optarg ;; ++ ++ -site | --site | --sit) ++ ac_prev=site ;; ++ -site=* | --site=* | --sit=*) ++ site=$ac_optarg ;; ++ ++ -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) ++ ac_prev=srcdir ;; ++ -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) ++ srcdir=$ac_optarg ;; ++ ++ -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ ++ | --syscon | --sysco | --sysc | --sys | --sy) ++ ac_prev=sysconfdir ;; ++ -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ ++ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) ++ sysconfdir=$ac_optarg ;; ++ ++ -target | --target | --targe | --targ | --tar | --ta | --t) ++ ac_prev=target_alias ;; ++ -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) ++ target_alias=$ac_optarg ;; ++ ++ -v | -verbose | --verbose | --verbos | --verbo | --verb) ++ verbose=yes ;; ++ ++ -version | --version | --versio | --versi | --vers | -V) ++ ac_init_version=: ;; ++ ++ -with-* | --with-*) ++ ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` ++ # Reject names that are not valid shell variable names. ++ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && ++ as_fn_error $? "invalid package name: $ac_useropt" ++ ac_useropt_orig=$ac_useropt ++ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` ++ case $ac_user_opts in ++ *" ++"with_$ac_useropt" ++"*) ;; ++ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig" ++ ac_unrecognized_sep=', ';; ++ esac ++ eval with_$ac_useropt=\$ac_optarg ;; ++ ++ -without-* | --without-*) ++ ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` ++ # Reject names that are not valid shell variable names. ++ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && ++ as_fn_error $? "invalid package name: $ac_useropt" ++ ac_useropt_orig=$ac_useropt ++ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` ++ case $ac_user_opts in ++ *" ++"with_$ac_useropt" ++"*) ;; ++ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig" ++ ac_unrecognized_sep=', ';; ++ esac ++ eval with_$ac_useropt=no ;; ++ ++ --x) ++ # Obsolete; use --with-x. ++ with_x=yes ;; ++ ++ -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ ++ | --x-incl | --x-inc | --x-in | --x-i) ++ ac_prev=x_includes ;; ++ -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ ++ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) ++ x_includes=$ac_optarg ;; ++ ++ -x-libraries | --x-libraries | --x-librarie | --x-librari \ ++ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) ++ ac_prev=x_libraries ;; ++ -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ ++ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) ++ x_libraries=$ac_optarg ;; ++ ++ -*) as_fn_error $? "unrecognized option: \`$ac_option' ++Try \`$0 --help' for more information" ++ ;; ++ ++ *=*) ++ ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` ++ # Reject names that are not valid shell variable names. ++ case $ac_envvar in #( ++ '' | [0-9]* | *[!_$as_cr_alnum]* ) ++ as_fn_error $? "invalid variable name: \`$ac_envvar'" ;; ++ esac ++ eval $ac_envvar=\$ac_optarg ++ export $ac_envvar ;; ++ ++ *) ++ # FIXME: should be removed in autoconf 3.0. ++ $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2 ++ expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && ++ $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2 ++ : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}" ++ ;; ++ ++ esac ++done ++ ++if test -n "$ac_prev"; then ++ ac_option=--`echo $ac_prev | sed 's/_/-/g'` ++ as_fn_error $? "missing argument to $ac_option" ++fi ++ ++if test -n "$ac_unrecognized_opts"; then ++ case $enable_option_checking in ++ no) ;; ++ fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;; ++ *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;; ++ esac ++fi ++ ++# Check all directory arguments for consistency. ++for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ ++ datadir sysconfdir sharedstatedir localstatedir includedir \ ++ oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ ++ libdir localedir mandir ++do ++ eval ac_val=\$$ac_var ++ # Remove trailing slashes. ++ case $ac_val in ++ */ ) ++ ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'` ++ eval $ac_var=\$ac_val;; ++ esac ++ # Be sure to have absolute directory names. ++ case $ac_val in ++ [\\/$]* | ?:[\\/]* ) continue;; ++ NONE | '' ) case $ac_var in *prefix ) continue;; esac;; ++ esac ++ as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val" ++done ++ ++# There might be people who depend on the old broken behavior: `$host' ++# used to hold the argument of --host etc. ++# FIXME: To remove some day. ++build=$build_alias ++host=$host_alias ++target=$target_alias ++ ++# FIXME: To remove some day. ++if test "x$host_alias" != x; then ++ if test "x$build_alias" = x; then ++ cross_compiling=maybe ++ $as_echo "$as_me: WARNING: if you wanted to set the --build type, don't use --host. ++ If a cross compiler is detected then cross compile mode will be used" >&2 ++ elif test "x$build_alias" != "x$host_alias"; then ++ cross_compiling=yes ++ fi ++fi ++ ++ac_tool_prefix= ++test -n "$host_alias" && ac_tool_prefix=$host_alias- ++ ++test "$silent" = yes && exec 6>/dev/null ++ ++ ++ac_pwd=`pwd` && test -n "$ac_pwd" && ++ac_ls_di=`ls -di .` && ++ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || ++ as_fn_error $? "working directory cannot be determined" ++test "X$ac_ls_di" = "X$ac_pwd_ls_di" || ++ as_fn_error $? "pwd does not report name of working directory" ++ ++ ++# Find the source files, if location was not specified. ++if test -z "$srcdir"; then ++ ac_srcdir_defaulted=yes ++ # Try the directory containing this script, then the parent directory. ++ ac_confdir=`$as_dirname -- "$as_myself" || ++$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ ++ X"$as_myself" : 'X\(//\)[^/]' \| \ ++ X"$as_myself" : 'X\(//\)$' \| \ ++ X"$as_myself" : 'X\(/\)' \| . 2>/dev/null || ++$as_echo X"$as_myself" | ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)[^/].*/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` ++ srcdir=$ac_confdir ++ if test ! -r "$srcdir/$ac_unique_file"; then ++ srcdir=.. ++ fi ++else ++ ac_srcdir_defaulted=no ++fi ++if test ! -r "$srcdir/$ac_unique_file"; then ++ test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." ++ as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir" ++fi ++ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" ++ac_abs_confdir=`( ++ cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg" ++ pwd)` ++# When building in place, set srcdir=. ++if test "$ac_abs_confdir" = "$ac_pwd"; then ++ srcdir=. ++fi ++# Remove unnecessary trailing slashes from srcdir. ++# Double slashes in file names in object file debugging info ++# mess up M-x gdb in Emacs. ++case $srcdir in ++*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; ++esac ++for ac_var in $ac_precious_vars; do ++ eval ac_env_${ac_var}_set=\${${ac_var}+set} ++ eval ac_env_${ac_var}_value=\$${ac_var} ++ eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} ++ eval ac_cv_env_${ac_var}_value=\$${ac_var} ++done ++ ++# ++# Report the --help message. ++# ++if test "$ac_init_help" = "long"; then ++ # Omit some internal or obsolete options to make the list less imposing. ++ # This message is too long to be a string in the A/UX 3.1 sh. ++ cat <<_ACEOF ++\`configure' configures fcoe-utils 1.0.9 to adapt to many kinds of systems. ++ ++Usage: $0 [OPTION]... [VAR=VALUE]... ++ ++To assign environment variables (e.g., CC, CFLAGS...), specify them as ++VAR=VALUE. See below for descriptions of some of the useful variables. ++ ++Defaults for the options are specified in brackets. ++ ++Configuration: ++ -h, --help display this help and exit ++ --help=short display options specific to this package ++ --help=recursive display the short help of all the included packages ++ -V, --version display version information and exit ++ -q, --quiet, --silent do not print \`checking ...' messages ++ --cache-file=FILE cache test results in FILE [disabled] ++ -C, --config-cache alias for \`--cache-file=config.cache' ++ -n, --no-create do not create output files ++ --srcdir=DIR find the sources in DIR [configure dir or \`..'] ++ ++Installation directories: ++ --prefix=PREFIX install architecture-independent files in PREFIX ++ @<:@@S|@ac_default_prefix@:>@ ++ --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX ++ @<:@PREFIX@:>@ ++ ++By default, \`make install' will install all the files in ++\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify ++an installation prefix other than \`$ac_default_prefix' using \`--prefix', ++for instance \`--prefix=\$HOME'. ++ ++For better control, use the options below. ++ ++Fine tuning of the installation directories: ++ --bindir=DIR user executables [EPREFIX/bin] ++ --sbindir=DIR system admin executables [EPREFIX/sbin] ++ --libexecdir=DIR program executables [EPREFIX/libexec] ++ --sysconfdir=DIR read-only single-machine data [PREFIX/etc] ++ --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] ++ --localstatedir=DIR modifiable single-machine data [PREFIX/var] ++ --libdir=DIR object code libraries [EPREFIX/lib] ++ --includedir=DIR C header files [PREFIX/include] ++ --oldincludedir=DIR C header files for non-gcc [/usr/include] ++ --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] ++ --datadir=DIR read-only architecture-independent data [DATAROOTDIR] ++ --infodir=DIR info documentation [DATAROOTDIR/info] ++ --localedir=DIR locale-dependent data [DATAROOTDIR/locale] ++ --mandir=DIR man documentation [DATAROOTDIR/man] ++ --docdir=DIR documentation root @<:@DATAROOTDIR/doc/fcoe-utils@:>@ ++ --htmldir=DIR html documentation [DOCDIR] ++ --dvidir=DIR dvi documentation [DOCDIR] ++ --pdfdir=DIR pdf documentation [DOCDIR] ++ --psdir=DIR ps documentation [DOCDIR] ++_ACEOF ++ ++ cat <<\_ACEOF ++ ++Program names: ++ --program-prefix=PREFIX prepend PREFIX to installed program names ++ --program-suffix=SUFFIX append SUFFIX to installed program names ++ --program-transform-name=PROGRAM run sed PROGRAM on installed program names ++_ACEOF ++fi ++ ++if test -n "$ac_init_help"; then ++ case $ac_init_help in ++ short | recursive ) echo "Configuration of fcoe-utils 1.0.9:";; ++ esac ++ cat <<\_ACEOF ++ ++Optional Features: ++ --disable-option-checking ignore unrecognized --enable/--with options ++ --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) ++ --enable-FEATURE[=ARG] include FEATURE [ARG=yes] ++ --disable-dependency-tracking speeds up one-time build ++ --enable-dependency-tracking do not reject slow dependency extractors ++ ++Optional Packages: ++ --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] ++ --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) ++ --without-dcb disable DCB support ++ ++Some influential environment variables: ++ CC C compiler command ++ CFLAGS C compiler flags ++ LDFLAGS linker flags, e.g. -L if you have libraries in a ++ nonstandard directory ++ LIBS libraries to pass to the linker, e.g. -l ++ CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I if ++ you have headers in a nonstandard directory ++ PKG_CONFIG path to pkg-config utility ++ PKG_CONFIG_PATH ++ directories to add to pkg-config's search path ++ PKG_CONFIG_LIBDIR ++ path overriding pkg-config's built-in search path ++ HBAAPI_CFLAGS ++ C compiler flags for HBAAPI, overriding pkg-config ++ HBAAPI_LIBS linker flags for HBAAPI, overriding pkg-config ++ DCBD_CFLAGS C compiler flags for DCBD, overriding pkg-config ++ DCBD_LIBS linker flags for DCBD, overriding pkg-config ++ ++Use these variables to override the choices made by `configure' or to help ++it to find libraries and programs with nonstandard names/locations. ++ ++Report bugs to . ++_ACEOF ++ac_status=$? ++fi ++ ++if test "$ac_init_help" = "recursive"; then ++ # If there are subdirs, report their specific --help. ++ for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue ++ test -d "$ac_dir" || ++ { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } || ++ continue ++ ac_builddir=. ++ ++case "$ac_dir" in ++.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; ++*) ++ ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` ++ # A ".." for each directory in $ac_dir_suffix. ++ ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` ++ case $ac_top_builddir_sub in ++ "") ac_top_builddir_sub=. ac_top_build_prefix= ;; ++ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; ++ esac ;; ++esac ++ac_abs_top_builddir=$ac_pwd ++ac_abs_builddir=$ac_pwd$ac_dir_suffix ++# for backward compatibility: ++ac_top_builddir=$ac_top_build_prefix ++ ++case $srcdir in ++ .) # We are building in place. ++ ac_srcdir=. ++ ac_top_srcdir=$ac_top_builddir_sub ++ ac_abs_top_srcdir=$ac_pwd ;; ++ [\\/]* | ?:[\\/]* ) # Absolute name. ++ ac_srcdir=$srcdir$ac_dir_suffix; ++ ac_top_srcdir=$srcdir ++ ac_abs_top_srcdir=$srcdir ;; ++ *) # Relative name. ++ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix ++ ac_top_srcdir=$ac_top_build_prefix$srcdir ++ ac_abs_top_srcdir=$ac_pwd/$srcdir ;; ++esac ++ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix ++ ++ cd "$ac_dir" || { ac_status=$?; continue; } ++ # Check for guested configure. ++ if test -f "$ac_srcdir/configure.gnu"; then ++ echo && ++ $SHELL "$ac_srcdir/configure.gnu" --help=recursive ++ elif test -f "$ac_srcdir/configure"; then ++ echo && ++ $SHELL "$ac_srcdir/configure" --help=recursive ++ else ++ $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 ++ fi || ac_status=$? ++ cd "$ac_pwd" || { ac_status=$?; break; } ++ done ++fi ++ ++test -n "$ac_init_help" && exit $ac_status ++if $ac_init_version; then ++ cat <<\_ACEOF ++fcoe-utils configure 1.0.9 ++generated by GNU Autoconf 2.68 ++ ++Copyright (C) 2010 Free Software Foundation, Inc. ++This configure script is free software; the Free Software Foundation ++gives unlimited permission to copy, distribute and modify it. ++_ACEOF ++ exit ++fi ++ ++## ------------------------ ## ++## Autoconf initialization. ## ++## ------------------------ ## ++ ++@%:@ ac_fn_c_try_compile LINENO ++@%:@ -------------------------- ++@%:@ Try to compile conftest.@S|@ac_ext, and return whether this succeeded. ++ac_fn_c_try_compile () ++{ ++ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack ++ rm -f conftest.$ac_objext ++ if { { ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" ++$as_echo "$ac_try_echo"; } >&5 ++ (eval "$ac_compile") 2>conftest.err ++ ac_status=$? ++ if test -s conftest.err; then ++ grep -v '^ *+' conftest.err >conftest.er1 ++ cat conftest.er1 >&5 ++ mv -f conftest.er1 conftest.err ++ fi ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then : ++ ac_retval=0 ++else ++ $as_echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_retval=1 ++fi ++ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno ++ as_fn_set_status $ac_retval ++ ++} @%:@ ac_fn_c_try_compile ++cat >config.log <<_ACEOF ++This file contains any messages produced by compilers while ++running configure, to aid debugging if configure makes a mistake. ++ ++It was created by fcoe-utils $as_me 1.0.9, which was ++generated by GNU Autoconf 2.68. Invocation command line was ++ ++ $ $0 $@ ++ ++_ACEOF ++exec 5>>config.log ++{ ++cat <<_ASUNAME ++## --------- ## ++## Platform. ## ++## --------- ## ++ ++hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` ++uname -m = `(uname -m) 2>/dev/null || echo unknown` ++uname -r = `(uname -r) 2>/dev/null || echo unknown` ++uname -s = `(uname -s) 2>/dev/null || echo unknown` ++uname -v = `(uname -v) 2>/dev/null || echo unknown` ++ ++/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` ++/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` ++ ++/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` ++/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` ++/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` ++/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` ++/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` ++/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` ++/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` ++ ++_ASUNAME ++ ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ $as_echo "PATH: $as_dir" ++ done ++IFS=$as_save_IFS ++ ++} >&5 ++ ++cat >&5 <<_ACEOF ++ ++ ++## ----------- ## ++## Core tests. ## ++## ----------- ## ++ ++_ACEOF ++ ++ ++# Keep a trace of the command line. ++# Strip out --no-create and --no-recursion so they do not pile up. ++# Strip out --silent because we don't want to record it for future runs. ++# Also quote any args containing shell meta-characters. ++# Make two passes to allow for proper duplicate-argument suppression. ++ac_configure_args= ++ac_configure_args0= ++ac_configure_args1= ++ac_must_keep_next=false ++for ac_pass in 1 2 ++do ++ for ac_arg ++ do ++ case $ac_arg in ++ -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; ++ -q | -quiet | --quiet | --quie | --qui | --qu | --q \ ++ | -silent | --silent | --silen | --sile | --sil) ++ continue ;; ++ *\'*) ++ ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; ++ esac ++ case $ac_pass in ++ 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;; ++ 2) ++ as_fn_append ac_configure_args1 " '$ac_arg'" ++ if test $ac_must_keep_next = true; then ++ ac_must_keep_next=false # Got value, back to normal. ++ else ++ case $ac_arg in ++ *=* | --config-cache | -C | -disable-* | --disable-* \ ++ | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ ++ | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ ++ | -with-* | --with-* | -without-* | --without-* | --x) ++ case "$ac_configure_args0 " in ++ "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; ++ esac ++ ;; ++ -* ) ac_must_keep_next=true ;; ++ esac ++ fi ++ as_fn_append ac_configure_args " '$ac_arg'" ++ ;; ++ esac ++ done ++done ++{ ac_configure_args0=; unset ac_configure_args0;} ++{ ac_configure_args1=; unset ac_configure_args1;} ++ ++# When interrupted or exit'd, cleanup temporary files, and complete ++# config.log. We remove comments because anyway the quotes in there ++# would cause problems or look ugly. ++# WARNING: Use '\'' to represent an apostrophe within the trap. ++# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. ++trap 'exit_status=$? ++ # Save into config.log some information that might help in debugging. ++ { ++ echo ++ ++ $as_echo "## ---------------- ## ++## Cache variables. ## ++## ---------------- ##" ++ echo ++ # The following way of writing the cache mishandles newlines in values, ++( ++ for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do ++ eval ac_val=\$$ac_var ++ case $ac_val in #( ++ *${as_nl}*) ++ case $ac_var in #( ++ *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 ++$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; ++ esac ++ case $ac_var in #( ++ _ | IFS | as_nl) ;; #( ++ BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( ++ *) { eval $ac_var=; unset $ac_var;} ;; ++ esac ;; ++ esac ++ done ++ (set) 2>&1 | ++ case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( ++ *${as_nl}ac_space=\ *) ++ sed -n \ ++ "s/'\''/'\''\\\\'\'''\''/g; ++ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" ++ ;; #( ++ *) ++ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" ++ ;; ++ esac | ++ sort ++) ++ echo ++ ++ $as_echo "## ----------------- ## ++## Output variables. ## ++## ----------------- ##" ++ echo ++ for ac_var in $ac_subst_vars ++ do ++ eval ac_val=\$$ac_var ++ case $ac_val in ++ *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; ++ esac ++ $as_echo "$ac_var='\''$ac_val'\''" ++ done | sort ++ echo ++ ++ if test -n "$ac_subst_files"; then ++ $as_echo "## ------------------- ## ++## File substitutions. ## ++## ------------------- ##" ++ echo ++ for ac_var in $ac_subst_files ++ do ++ eval ac_val=\$$ac_var ++ case $ac_val in ++ *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; ++ esac ++ $as_echo "$ac_var='\''$ac_val'\''" ++ done | sort ++ echo ++ fi ++ ++ if test -s confdefs.h; then ++ $as_echo "## ----------- ## ++## confdefs.h. ## ++## ----------- ##" ++ echo ++ cat confdefs.h ++ echo ++ fi ++ test "$ac_signal" != 0 && ++ $as_echo "$as_me: caught signal $ac_signal" ++ $as_echo "$as_me: exit $exit_status" ++ } >&5 ++ rm -f core *.core core.conftest.* && ++ rm -f -r conftest* confdefs* conf$$* $ac_clean_files && ++ exit $exit_status ++' 0 ++for ac_signal in 1 2 13 15; do ++ trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal ++done ++ac_signal=0 ++ ++# confdefs.h avoids OS command line length limits that DEFS can exceed. ++rm -f -r conftest* confdefs.h ++ ++$as_echo "/* confdefs.h */" > confdefs.h ++ ++# Predefined preprocessor variables. ++ ++cat >>confdefs.h <<_ACEOF ++@%:@define PACKAGE_NAME "$PACKAGE_NAME" ++_ACEOF ++ ++cat >>confdefs.h <<_ACEOF ++@%:@define PACKAGE_TARNAME "$PACKAGE_TARNAME" ++_ACEOF ++ ++cat >>confdefs.h <<_ACEOF ++@%:@define PACKAGE_VERSION "$PACKAGE_VERSION" ++_ACEOF ++ ++cat >>confdefs.h <<_ACEOF ++@%:@define PACKAGE_STRING "$PACKAGE_STRING" ++_ACEOF ++ ++cat >>confdefs.h <<_ACEOF ++@%:@define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" ++_ACEOF ++ ++cat >>confdefs.h <<_ACEOF ++@%:@define PACKAGE_URL "$PACKAGE_URL" ++_ACEOF ++ ++ ++# Let the site file select an alternate cache file if it wants to. ++# Prefer an explicitly selected file to automatically selected ones. ++ac_site_file1=NONE ++ac_site_file2=NONE ++if test -n "$CONFIG_SITE"; then ++ # We do not want a PATH search for config.site. ++ case $CONFIG_SITE in @%:@(( ++ -*) ac_site_file1=./$CONFIG_SITE;; ++ */*) ac_site_file1=$CONFIG_SITE;; ++ *) ac_site_file1=./$CONFIG_SITE;; ++ esac ++elif test "x$prefix" != xNONE; then ++ ac_site_file1=$prefix/share/config.site ++ ac_site_file2=$prefix/etc/config.site ++else ++ ac_site_file1=$ac_default_prefix/share/config.site ++ ac_site_file2=$ac_default_prefix/etc/config.site ++fi ++for ac_site_file in "$ac_site_file1" "$ac_site_file2" ++do ++ test "x$ac_site_file" = xNONE && continue ++ if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5 ++$as_echo "$as_me: loading site script $ac_site_file" >&6;} ++ sed 's/^/| /' "$ac_site_file" >&5 ++ . "$ac_site_file" \ ++ || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 ++$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} ++as_fn_error $? "failed to load site script $ac_site_file ++See \`config.log' for more details" "$LINENO" 5; } ++ fi ++done ++ ++if test -r "$cache_file"; then ++ # Some versions of bash will fail to source /dev/null (special files ++ # actually), so we avoid doing that. DJGPP emulates it as a regular file. ++ if test /dev/null != "$cache_file" && test -f "$cache_file"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5 ++$as_echo "$as_me: loading cache $cache_file" >&6;} ++ case $cache_file in ++ [\\/]* | ?:[\\/]* ) . "$cache_file";; ++ *) . "./$cache_file";; ++ esac ++ fi ++else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5 ++$as_echo "$as_me: creating cache $cache_file" >&6;} ++ >$cache_file ++fi ++ ++# Check that the precious variables saved in the cache have kept the same ++# value. ++ac_cache_corrupted=false ++for ac_var in $ac_precious_vars; do ++ eval ac_old_set=\$ac_cv_env_${ac_var}_set ++ eval ac_new_set=\$ac_env_${ac_var}_set ++ eval ac_old_val=\$ac_cv_env_${ac_var}_value ++ eval ac_new_val=\$ac_env_${ac_var}_value ++ case $ac_old_set,$ac_new_set in ++ set,) ++ { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 ++$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} ++ ac_cache_corrupted=: ;; ++ ,set) ++ { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5 ++$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} ++ ac_cache_corrupted=: ;; ++ ,);; ++ *) ++ if test "x$ac_old_val" != "x$ac_new_val"; then ++ # differences in whitespace do not lead to failure. ++ ac_old_val_w=`echo x $ac_old_val` ++ ac_new_val_w=`echo x $ac_new_val` ++ if test "$ac_old_val_w" != "$ac_new_val_w"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5 ++$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} ++ ac_cache_corrupted=: ++ else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 ++$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;} ++ eval $ac_var=\$ac_old_val ++ fi ++ { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5 ++$as_echo "$as_me: former value: \`$ac_old_val'" >&2;} ++ { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5 ++$as_echo "$as_me: current value: \`$ac_new_val'" >&2;} ++ fi;; ++ esac ++ # Pass precious variables to config.status. ++ if test "$ac_new_set" = set; then ++ case $ac_new_val in ++ *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; ++ *) ac_arg=$ac_var=$ac_new_val ;; ++ esac ++ case " $ac_configure_args " in ++ *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. ++ *) as_fn_append ac_configure_args " '$ac_arg'" ;; ++ esac ++ fi ++done ++if $ac_cache_corrupted; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 ++$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} ++ { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5 ++$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;} ++ as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5 ++fi ++## -------------------- ## ++## Main body of script. ## ++## -------------------- ## ++ ++ac_ext=c ++ac_cpp='$CPP $CPPFLAGS' ++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_c_compiler_gnu ++ ++ ++am__api_version='1.11' ++ ++ac_aux_dir= ++for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do ++ if test -f "$ac_dir/install-sh"; then ++ ac_aux_dir=$ac_dir ++ ac_install_sh="$ac_aux_dir/install-sh -c" ++ break ++ elif test -f "$ac_dir/install.sh"; then ++ ac_aux_dir=$ac_dir ++ ac_install_sh="$ac_aux_dir/install.sh -c" ++ break ++ elif test -f "$ac_dir/shtool"; then ++ ac_aux_dir=$ac_dir ++ ac_install_sh="$ac_aux_dir/shtool install -c" ++ break ++ fi ++done ++if test -z "$ac_aux_dir"; then ++ as_fn_error $? "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5 ++fi ++ ++# These three variables are undocumented and unsupported, ++# and are intended to be withdrawn in a future Autoconf release. ++# They can cause serious problems if a builder's source tree is in a directory ++# whose full name contains unusual characters. ++ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. ++ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. ++ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. ++ ++ ++# Find a good install program. We prefer a C program (faster), ++# so one script is as good as another. But avoid the broken or ++# incompatible versions: ++# SysV /etc/install, /usr/sbin/install ++# SunOS /usr/etc/install ++# IRIX /sbin/install ++# AIX /bin/install ++# AmigaOS /C/install, which installs bootblocks on floppy discs ++# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag ++# AFS /usr/afsws/bin/install, which mishandles nonexistent args ++# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" ++# OS/2's system install, which has a completely different semantic ++# ./install, which can be erroneously created by make from ./install.sh. ++# Reject install programs that cannot install multiple files. ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5 ++$as_echo_n "checking for a BSD-compatible install... " >&6; } ++if test -z "$INSTALL"; then ++if ${ac_cv_path_install+:} false; then : ++ $as_echo_n "(cached) " >&6 ++else ++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ # Account for people who put trailing slashes in PATH elements. ++case $as_dir/ in @%:@(( ++ ./ | .// | /[cC]/* | \ ++ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ ++ ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \ ++ /usr/ucb/* ) ;; ++ *) ++ # OSF1 and SCO ODT 3.0 have their own names for install. ++ # Don't use installbsd from OSF since it installs stuff as root ++ # by default. ++ for ac_prog in ginstall scoinst install; do ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then ++ if test $ac_prog = install && ++ grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then ++ # AIX install. It has an incompatible calling convention. ++ : ++ elif test $ac_prog = install && ++ grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then ++ # program-specific install script used by HP pwplus--don't use. ++ : ++ else ++ rm -rf conftest.one conftest.two conftest.dir ++ echo one > conftest.one ++ echo two > conftest.two ++ mkdir conftest.dir ++ if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" && ++ test -s conftest.one && test -s conftest.two && ++ test -s conftest.dir/conftest.one && ++ test -s conftest.dir/conftest.two ++ then ++ ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" ++ break 3 ++ fi ++ fi ++ fi ++ done ++ done ++ ;; ++esac ++ ++ done ++IFS=$as_save_IFS ++ ++rm -rf conftest.one conftest.two conftest.dir ++ ++fi ++ if test "${ac_cv_path_install+set}" = set; then ++ INSTALL=$ac_cv_path_install ++ else ++ # As a last resort, use the slow shell script. Don't cache a ++ # value for INSTALL within a source directory, because that will ++ # break other packages using the cache if that directory is ++ # removed, or if the value is a relative name. ++ INSTALL=$ac_install_sh ++ fi ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5 ++$as_echo "$INSTALL" >&6; } ++ ++# Use test -z because SunOS4 sh mishandles braces in ${var-val}. ++# It thinks the first close brace ends the variable substitution. ++test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' ++ ++test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' ++ ++test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' ++ ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5 ++$as_echo_n "checking whether build environment is sane... " >&6; } ++# Just in case ++sleep 1 ++echo timestamp > conftest.file ++# Reject unsafe characters in $srcdir or the absolute working directory ++# name. Accept space and tab only in the latter. ++am_lf=' ++' ++case `pwd` in ++ *[\\\"\#\$\&\'\`$am_lf]*) ++ as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;; ++esac ++case $srcdir in ++ *[\\\"\#\$\&\'\`$am_lf\ \ ]*) ++ as_fn_error $? "unsafe srcdir value: \`$srcdir'" "$LINENO" 5;; ++esac ++ ++# Do `set' in a subshell so we don't clobber the current shell's ++# arguments. Must try -L first in case configure is actually a ++# symlink; some systems play weird games with the mod time of symlinks ++# (eg FreeBSD returns the mod time of the symlink's containing ++# directory). ++if ( ++ set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` ++ if test "$*" = "X"; then ++ # -L didn't work. ++ set X `ls -t "$srcdir/configure" conftest.file` ++ fi ++ rm -f conftest.file ++ if test "$*" != "X $srcdir/configure conftest.file" \ ++ && test "$*" != "X conftest.file $srcdir/configure"; then ++ ++ # If neither matched, then we have a broken ls. This can happen ++ # if, for instance, CONFIG_SHELL is bash and it inherits a ++ # broken ls alias from the environment. This has actually ++ # happened. Such a system could not be considered "sane". ++ as_fn_error $? "ls -t appears to fail. Make sure there is not a broken ++alias in your environment" "$LINENO" 5 ++ fi ++ ++ test "$2" = conftest.file ++ ) ++then ++ # Ok. ++ : ++else ++ as_fn_error $? "newly created file is older than distributed files! ++Check your system clock" "$LINENO" 5 ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 ++$as_echo "yes" >&6; } ++test "$program_prefix" != NONE && ++ program_transform_name="s&^&$program_prefix&;$program_transform_name" ++# Use a double $ so make ignores it. ++test "$program_suffix" != NONE && ++ program_transform_name="s&\$&$program_suffix&;$program_transform_name" ++# Double any \ or $. ++# By default was `s,x,x', remove it if useless. ++ac_script='s/[\\$]/&&/g;s/;s,x,x,$//' ++program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"` ++ ++# expand $ac_aux_dir to an absolute path ++am_aux_dir=`cd $ac_aux_dir && pwd` ++ ++if test x"${MISSING+set}" != xset; then ++ case $am_aux_dir in ++ *\ * | *\ *) ++ MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; ++ *) ++ MISSING="\${SHELL} $am_aux_dir/missing" ;; ++ esac ++fi ++# Use eval to expand $SHELL ++if eval "$MISSING --run true"; then ++ am_missing_run="$MISSING --run " ++else ++ am_missing_run= ++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`missing' script is too old or missing" >&5 ++$as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;} ++fi ++ ++if test x"${install_sh}" != xset; then ++ case $am_aux_dir in ++ *\ * | *\ *) ++ install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; ++ *) ++ install_sh="\${SHELL} $am_aux_dir/install-sh" ++ esac ++fi ++ ++# Installed binaries are usually stripped using `strip' when the user ++# run `make install-strip'. However `strip' might not be the right ++# tool to use in cross-compilation environments, therefore Automake ++# will honor the `STRIP' environment variable to overrule this program. ++if test "$cross_compiling" != no; then ++ if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. ++set dummy ${ac_tool_prefix}strip; ac_word=$2 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if ${ac_cv_prog_STRIP+:} false; then : ++ $as_echo_n "(cached) " >&6 ++else ++ if test -n "$STRIP"; then ++ ac_cv_prog_STRIP="$STRIP" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_STRIP="${ac_tool_prefix}strip" ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++ done ++IFS=$as_save_IFS ++ ++fi ++fi ++STRIP=$ac_cv_prog_STRIP ++if test -n "$STRIP"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 ++$as_echo "$STRIP" >&6; } ++else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } ++fi ++ ++ ++fi ++if test -z "$ac_cv_prog_STRIP"; then ++ ac_ct_STRIP=$STRIP ++ # Extract the first word of "strip", so it can be a program name with args. ++set dummy strip; ac_word=$2 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if ${ac_cv_prog_ac_ct_STRIP+:} false; then : ++ $as_echo_n "(cached) " >&6 ++else ++ if test -n "$ac_ct_STRIP"; then ++ ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_ac_ct_STRIP="strip" ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++ done ++IFS=$as_save_IFS ++ ++fi ++fi ++ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP ++if test -n "$ac_ct_STRIP"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 ++$as_echo "$ac_ct_STRIP" >&6; } ++else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } ++fi ++ ++ if test "x$ac_ct_STRIP" = x; then ++ STRIP=":" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 ++$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ++ac_tool_warned=yes ;; ++esac ++ STRIP=$ac_ct_STRIP ++ fi ++else ++ STRIP="$ac_cv_prog_STRIP" ++fi ++ ++fi ++INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" ++ ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5 ++$as_echo_n "checking for a thread-safe mkdir -p... " >&6; } ++if test -z "$MKDIR_P"; then ++ if ${ac_cv_path_mkdir+:} false; then : ++ $as_echo_n "(cached) " >&6 ++else ++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_prog in mkdir gmkdir; do ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue ++ case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #( ++ 'mkdir (GNU coreutils) '* | \ ++ 'mkdir (coreutils) '* | \ ++ 'mkdir (fileutils) '4.1*) ++ ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext ++ break 3;; ++ esac ++ done ++ done ++ done ++IFS=$as_save_IFS ++ ++fi ++ ++ test -d ./--version && rmdir ./--version ++ if test "${ac_cv_path_mkdir+set}" = set; then ++ MKDIR_P="$ac_cv_path_mkdir -p" ++ else ++ # As a last resort, use the slow shell script. Don't cache a ++ # value for MKDIR_P within a source directory, because that will ++ # break other packages using the cache if that directory is ++ # removed, or if the value is a relative name. ++ MKDIR_P="$ac_install_sh -d" ++ fi ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5 ++$as_echo "$MKDIR_P" >&6; } ++ ++mkdir_p="$MKDIR_P" ++case $mkdir_p in ++ [\\/$]* | ?:[\\/]*) ;; ++ */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;; ++esac ++ ++for ac_prog in gawk mawk nawk awk ++do ++ # Extract the first word of "$ac_prog", so it can be a program name with args. ++set dummy $ac_prog; ac_word=$2 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if ${ac_cv_prog_AWK+:} false; then : ++ $as_echo_n "(cached) " >&6 ++else ++ if test -n "$AWK"; then ++ ac_cv_prog_AWK="$AWK" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_AWK="$ac_prog" ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++ done ++IFS=$as_save_IFS ++ ++fi ++fi ++AWK=$ac_cv_prog_AWK ++if test -n "$AWK"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5 ++$as_echo "$AWK" >&6; } ++else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } ++fi ++ ++ ++ test -n "$AWK" && break ++done ++ ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5 ++$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } ++set x ${MAKE-make} ++ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` ++if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then : ++ $as_echo_n "(cached) " >&6 ++else ++ cat >conftest.make <<\_ACEOF ++SHELL = /bin/sh ++all: ++ @echo '@@@%%%=$(MAKE)=@@@%%%' ++_ACEOF ++# GNU make sometimes prints "make[1]: Entering ...", which would confuse us. ++case `${MAKE-make} -f conftest.make 2>/dev/null` in ++ *@@@%%%=?*=@@@%%%*) ++ eval ac_cv_prog_make_${ac_make}_set=yes;; ++ *) ++ eval ac_cv_prog_make_${ac_make}_set=no;; ++esac ++rm -f conftest.make ++fi ++if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 ++$as_echo "yes" >&6; } ++ SET_MAKE= ++else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } ++ SET_MAKE="MAKE=${MAKE-make}" ++fi ++ ++rm -rf .tst 2>/dev/null ++mkdir .tst 2>/dev/null ++if test -d .tst; then ++ am__leading_dot=. ++else ++ am__leading_dot=_ ++fi ++rmdir .tst 2>/dev/null ++ ++if test "`cd $srcdir && pwd`" != "`pwd`"; then ++ # Use -I$(srcdir) only when $(srcdir) != ., so that make's output ++ # is not polluted with repeated "-I." ++ am__isrc=' -I$(srcdir)' ++ # test to see if srcdir already configured ++ if test -f $srcdir/config.status; then ++ as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5 ++ fi ++fi ++ ++# test whether we have cygpath ++if test -z "$CYGPATH_W"; then ++ if (cygpath --version) >/dev/null 2>/dev/null; then ++ CYGPATH_W='cygpath -w' ++ else ++ CYGPATH_W=echo ++ fi ++fi ++ ++ ++# Define the identity of the package. ++ PACKAGE='fcoe-utils' ++ VERSION='1.0.9' ++ ++ ++cat >>confdefs.h <<_ACEOF ++@%:@define PACKAGE "$PACKAGE" ++_ACEOF ++ ++ ++cat >>confdefs.h <<_ACEOF ++@%:@define VERSION "$VERSION" ++_ACEOF ++ ++# Some tools Automake needs. ++ ++ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"} ++ ++ ++AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"} ++ ++ ++AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"} ++ ++ ++AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"} ++ ++ ++MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} ++ ++# We need awk for the "check" target. The system "awk" is bad on ++# some platforms. ++# Always define AMTAR for backward compatibility. ++ ++AMTAR=${AMTAR-"${am_missing_run}tar"} ++ ++am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -' ++ ++ ++ ++ ++ ++ ++ac_ext=c ++ac_cpp='$CPP $CPPFLAGS' ++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_c_compiler_gnu ++if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. ++set dummy ${ac_tool_prefix}gcc; ac_word=$2 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if ${ac_cv_prog_CC+:} false; then : ++ $as_echo_n "(cached) " >&6 ++else ++ if test -n "$CC"; then ++ ac_cv_prog_CC="$CC" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_CC="${ac_tool_prefix}gcc" ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++ done ++IFS=$as_save_IFS ++ ++fi ++fi ++CC=$ac_cv_prog_CC ++if test -n "$CC"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 ++$as_echo "$CC" >&6; } ++else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } ++fi ++ ++ ++fi ++if test -z "$ac_cv_prog_CC"; then ++ ac_ct_CC=$CC ++ # Extract the first word of "gcc", so it can be a program name with args. ++set dummy gcc; ac_word=$2 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if ${ac_cv_prog_ac_ct_CC+:} false; then : ++ $as_echo_n "(cached) " >&6 ++else ++ if test -n "$ac_ct_CC"; then ++ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_ac_ct_CC="gcc" ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++ done ++IFS=$as_save_IFS ++ ++fi ++fi ++ac_ct_CC=$ac_cv_prog_ac_ct_CC ++if test -n "$ac_ct_CC"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 ++$as_echo "$ac_ct_CC" >&6; } ++else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } ++fi ++ ++ if test "x$ac_ct_CC" = x; then ++ CC="" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 ++$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ++ac_tool_warned=yes ;; ++esac ++ CC=$ac_ct_CC ++ fi ++else ++ CC="$ac_cv_prog_CC" ++fi ++ ++if test -z "$CC"; then ++ if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. ++set dummy ${ac_tool_prefix}cc; ac_word=$2 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if ${ac_cv_prog_CC+:} false; then : ++ $as_echo_n "(cached) " >&6 ++else ++ if test -n "$CC"; then ++ ac_cv_prog_CC="$CC" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_CC="${ac_tool_prefix}cc" ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++ done ++IFS=$as_save_IFS ++ ++fi ++fi ++CC=$ac_cv_prog_CC ++if test -n "$CC"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 ++$as_echo "$CC" >&6; } ++else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } ++fi ++ ++ ++ fi ++fi ++if test -z "$CC"; then ++ # Extract the first word of "cc", so it can be a program name with args. ++set dummy cc; ac_word=$2 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if ${ac_cv_prog_CC+:} false; then : ++ $as_echo_n "(cached) " >&6 ++else ++ if test -n "$CC"; then ++ ac_cv_prog_CC="$CC" # Let the user override the test. ++else ++ ac_prog_rejected=no ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then ++ ac_prog_rejected=yes ++ continue ++ fi ++ ac_cv_prog_CC="cc" ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++ done ++IFS=$as_save_IFS ++ ++if test $ac_prog_rejected = yes; then ++ # We found a bogon in the path, so make sure we never use it. ++ set dummy $ac_cv_prog_CC ++ shift ++ if test $@%:@ != 0; then ++ # We chose a different compiler from the bogus one. ++ # However, it has the same basename, so the bogon will be chosen ++ # first if we set CC to just the basename; use the full file name. ++ shift ++ ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" ++ fi ++fi ++fi ++fi ++CC=$ac_cv_prog_CC ++if test -n "$CC"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 ++$as_echo "$CC" >&6; } ++else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } ++fi ++ ++ ++fi ++if test -z "$CC"; then ++ if test -n "$ac_tool_prefix"; then ++ for ac_prog in cl.exe ++ do ++ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. ++set dummy $ac_tool_prefix$ac_prog; ac_word=$2 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if ${ac_cv_prog_CC+:} false; then : ++ $as_echo_n "(cached) " >&6 ++else ++ if test -n "$CC"; then ++ ac_cv_prog_CC="$CC" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_CC="$ac_tool_prefix$ac_prog" ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++ done ++IFS=$as_save_IFS ++ ++fi ++fi ++CC=$ac_cv_prog_CC ++if test -n "$CC"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 ++$as_echo "$CC" >&6; } ++else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } ++fi ++ ++ ++ test -n "$CC" && break ++ done ++fi ++if test -z "$CC"; then ++ ac_ct_CC=$CC ++ for ac_prog in cl.exe ++do ++ # Extract the first word of "$ac_prog", so it can be a program name with args. ++set dummy $ac_prog; ac_word=$2 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if ${ac_cv_prog_ac_ct_CC+:} false; then : ++ $as_echo_n "(cached) " >&6 ++else ++ if test -n "$ac_ct_CC"; then ++ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_ac_ct_CC="$ac_prog" ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++ done ++IFS=$as_save_IFS ++ ++fi ++fi ++ac_ct_CC=$ac_cv_prog_ac_ct_CC ++if test -n "$ac_ct_CC"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 ++$as_echo "$ac_ct_CC" >&6; } ++else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } ++fi ++ ++ ++ test -n "$ac_ct_CC" && break ++done ++ ++ if test "x$ac_ct_CC" = x; then ++ CC="" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 ++$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ++ac_tool_warned=yes ;; ++esac ++ CC=$ac_ct_CC ++ fi ++fi ++ ++fi ++ ++ ++test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 ++$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} ++as_fn_error $? "no acceptable C compiler found in \$PATH ++See \`config.log' for more details" "$LINENO" 5; } ++ ++# Provide some information about the compiler. ++$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 ++set X $ac_compile ++ac_compiler=$2 ++for ac_option in --version -v -V -qversion; do ++ { { ac_try="$ac_compiler $ac_option >&5" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" ++$as_echo "$ac_try_echo"; } >&5 ++ (eval "$ac_compiler $ac_option >&5") 2>conftest.err ++ ac_status=$? ++ if test -s conftest.err; then ++ sed '10a\ ++... rest of stderr output deleted ... ++ 10q' conftest.err >conftest.er1 ++ cat conftest.er1 >&5 ++ fi ++ rm -f conftest.er1 conftest.err ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; } ++done ++ ++cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++ac_clean_files_save=$ac_clean_files ++ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out" ++# Try to create an executable without -o first, disregard a.out. ++# It will help us diagnose broken compilers, and finding out an intuition ++# of exeext. ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5 ++$as_echo_n "checking whether the C compiler works... " >&6; } ++ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` ++ ++# The possible output files: ++ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*" ++ ++ac_rmfiles= ++for ac_file in $ac_files ++do ++ case $ac_file in ++ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; ++ * ) ac_rmfiles="$ac_rmfiles $ac_file";; ++ esac ++done ++rm -f $ac_rmfiles ++ ++if { { ac_try="$ac_link_default" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" ++$as_echo "$ac_try_echo"; } >&5 ++ (eval "$ac_link_default") 2>&5 ++ ac_status=$? ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; }; then : ++ # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. ++# So ignore a value of `no', otherwise this would lead to `EXEEXT = no' ++# in a Makefile. We should not override ac_cv_exeext if it was cached, ++# so that the user can short-circuit this test for compilers unknown to ++# Autoconf. ++for ac_file in $ac_files '' ++do ++ test -f "$ac_file" || continue ++ case $ac_file in ++ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ++ ;; ++ [ab].out ) ++ # We found the default executable, but exeext='' is most ++ # certainly right. ++ break;; ++ *.* ) ++ if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; ++ then :; else ++ ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` ++ fi ++ # We set ac_cv_exeext here because the later test for it is not ++ # safe: cross compilers may not add the suffix if given an `-o' ++ # argument, so we may need to know it at that point already. ++ # Even if this section looks crufty: it has the advantage of ++ # actually working. ++ break;; ++ * ) ++ break;; ++ esac ++done ++test "$ac_cv_exeext" = no && ac_cv_exeext= ++ ++else ++ ac_file='' ++fi ++if test -z "$ac_file"; then : ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } ++$as_echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 ++$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} ++as_fn_error 77 "C compiler cannot create executables ++See \`config.log' for more details" "$LINENO" 5; } ++else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 ++$as_echo "yes" >&6; } ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5 ++$as_echo_n "checking for C compiler default output file name... " >&6; } ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5 ++$as_echo "$ac_file" >&6; } ++ac_exeext=$ac_cv_exeext ++ ++rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out ++ac_clean_files=$ac_clean_files_save ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5 ++$as_echo_n "checking for suffix of executables... " >&6; } ++if { { ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" ++$as_echo "$ac_try_echo"; } >&5 ++ (eval "$ac_link") 2>&5 ++ ac_status=$? ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; }; then : ++ # If both `conftest.exe' and `conftest' are `present' (well, observable) ++# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will ++# work properly (i.e., refer to `conftest.exe'), while it won't with ++# `rm'. ++for ac_file in conftest.exe conftest conftest.*; do ++ test -f "$ac_file" || continue ++ case $ac_file in ++ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; ++ *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` ++ break;; ++ * ) break;; ++ esac ++done ++else ++ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 ++$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} ++as_fn_error $? "cannot compute suffix of executables: cannot compile and link ++See \`config.log' for more details" "$LINENO" 5; } ++fi ++rm -f conftest conftest$ac_cv_exeext ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5 ++$as_echo "$ac_cv_exeext" >&6; } ++ ++rm -f conftest.$ac_ext ++EXEEXT=$ac_cv_exeext ++ac_exeext=$EXEEXT ++cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++@%:@include ++int ++main () ++{ ++FILE *f = fopen ("conftest.out", "w"); ++ return ferror (f) || fclose (f) != 0; ++ ++ ; ++ return 0; ++} ++_ACEOF ++ac_clean_files="$ac_clean_files conftest.out" ++# Check that the compiler produces executables we can run. If not, either ++# the compiler is broken, or we cross compile. ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5 ++$as_echo_n "checking whether we are cross compiling... " >&6; } ++if test "$cross_compiling" != yes; then ++ { { ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" ++$as_echo "$ac_try_echo"; } >&5 ++ (eval "$ac_link") 2>&5 ++ ac_status=$? ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; } ++ if { ac_try='./conftest$ac_cv_exeext' ++ { { case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" ++$as_echo "$ac_try_echo"; } >&5 ++ (eval "$ac_try") 2>&5 ++ ac_status=$? ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; }; }; then ++ cross_compiling=no ++ else ++ if test "$cross_compiling" = maybe; then ++ cross_compiling=yes ++ else ++ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 ++$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} ++as_fn_error $? "cannot run C compiled programs. ++If you meant to cross compile, use \`--host'. ++See \`config.log' for more details" "$LINENO" 5; } ++ fi ++ fi ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5 ++$as_echo "$cross_compiling" >&6; } ++ ++rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out ++ac_clean_files=$ac_clean_files_save ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5 ++$as_echo_n "checking for suffix of object files... " >&6; } ++if ${ac_cv_objext+:} false; then : ++ $as_echo_n "(cached) " >&6 ++else ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.o conftest.obj ++if { { ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" ++$as_echo "$ac_try_echo"; } >&5 ++ (eval "$ac_compile") 2>&5 ++ ac_status=$? ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; }; then : ++ for ac_file in conftest.o conftest.obj conftest.*; do ++ test -f "$ac_file" || continue; ++ case $ac_file in ++ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;; ++ *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` ++ break;; ++ esac ++done ++else ++ $as_echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 ++$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} ++as_fn_error $? "cannot compute suffix of object files: cannot compile ++See \`config.log' for more details" "$LINENO" 5; } ++fi ++rm -f conftest.$ac_cv_objext conftest.$ac_ext ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5 ++$as_echo "$ac_cv_objext" >&6; } ++OBJEXT=$ac_cv_objext ++ac_objext=$OBJEXT ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5 ++$as_echo_n "checking whether we are using the GNU C compiler... " >&6; } ++if ${ac_cv_c_compiler_gnu+:} false; then : ++ $as_echo_n "(cached) " >&6 ++else ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++#ifndef __GNUC__ ++ choke me ++#endif ++ ++ ; ++ return 0; ++} ++_ACEOF ++if ac_fn_c_try_compile "$LINENO"; then : ++ ac_compiler_gnu=yes ++else ++ ac_compiler_gnu=no ++fi ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++ac_cv_c_compiler_gnu=$ac_compiler_gnu ++ ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5 ++$as_echo "$ac_cv_c_compiler_gnu" >&6; } ++if test $ac_compiler_gnu = yes; then ++ GCC=yes ++else ++ GCC= ++fi ++ac_test_CFLAGS=${CFLAGS+set} ++ac_save_CFLAGS=$CFLAGS ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 ++$as_echo_n "checking whether $CC accepts -g... " >&6; } ++if ${ac_cv_prog_cc_g+:} false; then : ++ $as_echo_n "(cached) " >&6 ++else ++ ac_save_c_werror_flag=$ac_c_werror_flag ++ ac_c_werror_flag=yes ++ ac_cv_prog_cc_g=no ++ CFLAGS="-g" ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++if ac_fn_c_try_compile "$LINENO"; then : ++ ac_cv_prog_cc_g=yes ++else ++ CFLAGS="" ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++if ac_fn_c_try_compile "$LINENO"; then : ++ ++else ++ ac_c_werror_flag=$ac_save_c_werror_flag ++ CFLAGS="-g" ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++if ac_fn_c_try_compile "$LINENO"; then : ++ ac_cv_prog_cc_g=yes ++fi ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++fi ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++fi ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++ ac_c_werror_flag=$ac_save_c_werror_flag ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5 ++$as_echo "$ac_cv_prog_cc_g" >&6; } ++if test "$ac_test_CFLAGS" = set; then ++ CFLAGS=$ac_save_CFLAGS ++elif test $ac_cv_prog_cc_g = yes; then ++ if test "$GCC" = yes; then ++ CFLAGS="-g -O2" ++ else ++ CFLAGS="-g" ++ fi ++else ++ if test "$GCC" = yes; then ++ CFLAGS="-O2" ++ else ++ CFLAGS= ++ fi ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 ++$as_echo_n "checking for $CC option to accept ISO C89... " >&6; } ++if ${ac_cv_prog_cc_c89+:} false; then : ++ $as_echo_n "(cached) " >&6 ++else ++ ac_cv_prog_cc_c89=no ++ac_save_CC=$CC ++cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++#include ++#include ++#include ++#include ++/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ ++struct buf { int x; }; ++FILE * (*rcsopen) (struct buf *, struct stat *, int); ++static char *e (p, i) ++ char **p; ++ int i; ++{ ++ return p[i]; ++} ++static char *f (char * (*g) (char **, int), char **p, ...) ++{ ++ char *s; ++ va_list v; ++ va_start (v,p); ++ s = g (p, va_arg (v,int)); ++ va_end (v); ++ return s; ++} ++ ++/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has ++ function prototypes and stuff, but not '\xHH' hex character constants. ++ These don't provoke an error unfortunately, instead are silently treated ++ as 'x'. The following induces an error, until -std is added to get ++ proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an ++ array size at least. It's necessary to write '\x00'==0 to get something ++ that's true only with -std. */ ++int osf4_cc_array ['\x00' == 0 ? 1 : -1]; ++ ++/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters ++ inside strings and character constants. */ ++#define FOO(x) 'x' ++int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; ++ ++int test (int i, double x); ++struct s1 {int (*f) (int a);}; ++struct s2 {int (*f) (double a);}; ++int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); ++int argc; ++char **argv; ++int ++main () ++{ ++return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; ++ ; ++ return 0; ++} ++_ACEOF ++for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ ++ -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" ++do ++ CC="$ac_save_CC $ac_arg" ++ if ac_fn_c_try_compile "$LINENO"; then : ++ ac_cv_prog_cc_c89=$ac_arg ++fi ++rm -f core conftest.err conftest.$ac_objext ++ test "x$ac_cv_prog_cc_c89" != "xno" && break ++done ++rm -f conftest.$ac_ext ++CC=$ac_save_CC ++ ++fi ++# AC_CACHE_VAL ++case "x$ac_cv_prog_cc_c89" in ++ x) ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 ++$as_echo "none needed" >&6; } ;; ++ xno) ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 ++$as_echo "unsupported" >&6; } ;; ++ *) ++ CC="$CC $ac_cv_prog_cc_c89" ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 ++$as_echo "$ac_cv_prog_cc_c89" >&6; } ;; ++esac ++if test "x$ac_cv_prog_cc_c89" != xno; then : ++ ++fi ++ ++ac_ext=c ++ac_cpp='$CPP $CPPFLAGS' ++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_c_compiler_gnu ++DEPDIR="${am__leading_dot}deps" ++ ++ac_config_commands="$ac_config_commands depfiles" ++ ++ ++am_make=${MAKE-make} ++cat > confinc << 'END' ++am__doit: ++ @echo this is the am__doit target ++.PHONY: am__doit ++END ++# If we don't find an include directive, just comment out the code. ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5 ++$as_echo_n "checking for style of include used by $am_make... " >&6; } ++am__include="#" ++am__quote= ++_am_result=none ++# First try GNU make style include. ++echo "include confinc" > confmf ++# Ignore all kinds of additional output from `make'. ++case `$am_make -s -f confmf 2> /dev/null` in #( ++*the\ am__doit\ target*) ++ am__include=include ++ am__quote= ++ _am_result=GNU ++ ;; ++esac ++# Now try BSD make style include. ++if test "$am__include" = "#"; then ++ echo '.include "confinc"' > confmf ++ case `$am_make -s -f confmf 2> /dev/null` in #( ++ *the\ am__doit\ target*) ++ am__include=.include ++ am__quote="\"" ++ _am_result=BSD ++ ;; ++ esac ++fi ++ ++ ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5 ++$as_echo "$_am_result" >&6; } ++rm -f confinc confmf ++ ++@%:@ Check whether --enable-dependency-tracking was given. ++if test "${enable_dependency_tracking+set}" = set; then : ++ enableval=$enable_dependency_tracking; ++fi ++ ++if test "x$enable_dependency_tracking" != xno; then ++ am_depcomp="$ac_aux_dir/depcomp" ++ AMDEPBACKSLASH='\' ++fi ++ if test "x$enable_dependency_tracking" != xno; then ++ AMDEP_TRUE= ++ AMDEP_FALSE='#' ++else ++ AMDEP_TRUE='#' ++ AMDEP_FALSE= ++fi ++ ++ ++ ++depcc="$CC" am_compiler_list= ++ ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 ++$as_echo_n "checking dependency style of $depcc... " >&6; } ++if ${am_cv_CC_dependencies_compiler_type+:} false; then : ++ $as_echo_n "(cached) " >&6 ++else ++ if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then ++ # We make a subdir and do the tests there. Otherwise we can end up ++ # making bogus files that we don't know about and never remove. For ++ # instance it was reported that on HP-UX the gcc test will end up ++ # making a dummy file named `D' -- because `-MD' means `put the output ++ # in D'. ++ mkdir conftest.dir ++ # Copy depcomp to subdir because otherwise we won't find it if we're ++ # using a relative directory. ++ cp "$am_depcomp" conftest.dir ++ cd conftest.dir ++ # We will build objects and dependencies in a subdirectory because ++ # it helps to detect inapplicable dependency modes. For instance ++ # both Tru64's cc and ICC support -MD to output dependencies as a ++ # side effect of compilation, but ICC will put the dependencies in ++ # the current directory while Tru64 will put them in the object ++ # directory. ++ mkdir sub ++ ++ am_cv_CC_dependencies_compiler_type=none ++ if test "$am_compiler_list" = ""; then ++ am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` ++ fi ++ am__universal=false ++ case " $depcc " in #( ++ *\ -arch\ *\ -arch\ *) am__universal=true ;; ++ esac ++ ++ for depmode in $am_compiler_list; do ++ # Setup a source with many dependencies, because some compilers ++ # like to wrap large dependency lists on column 80 (with \), and ++ # we should not choose a depcomp mode which is confused by this. ++ # ++ # We need to recreate these files for each test, as the compiler may ++ # overwrite some of them when testing with obscure command lines. ++ # This happens at least with the AIX C compiler. ++ : > sub/conftest.c ++ for i in 1 2 3 4 5 6; do ++ echo '#include "conftst'$i'.h"' >> sub/conftest.c ++ # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with ++ # Solaris 8's {/usr,}/bin/sh. ++ touch sub/conftst$i.h ++ done ++ echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf ++ ++ # We check with `-c' and `-o' for the sake of the "dashmstdout" ++ # mode. It turns out that the SunPro C++ compiler does not properly ++ # handle `-M -o', and we need to detect this. Also, some Intel ++ # versions had trouble with output in subdirs ++ am__obj=sub/conftest.${OBJEXT-o} ++ am__minus_obj="-o $am__obj" ++ case $depmode in ++ gcc) ++ # This depmode causes a compiler race in universal mode. ++ test "$am__universal" = false || continue ++ ;; ++ nosideeffect) ++ # after this tag, mechanisms are not by side-effect, so they'll ++ # only be used when explicitly requested ++ if test "x$enable_dependency_tracking" = xyes; then ++ continue ++ else ++ break ++ fi ++ ;; ++ msvisualcpp | msvcmsys) ++ # This compiler won't grok `-c -o', but also, the minuso test has ++ # not run yet. These depmodes are late enough in the game, and ++ # so weak that their functioning should not be impacted. ++ am__obj=conftest.${OBJEXT-o} ++ am__minus_obj= ++ ;; ++ none) break ;; ++ esac ++ if depmode=$depmode \ ++ source=sub/conftest.c object=$am__obj \ ++ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ ++ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ ++ >/dev/null 2>conftest.err && ++ grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && ++ grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && ++ grep $am__obj sub/conftest.Po > /dev/null 2>&1 && ++ ${MAKE-make} -s -f confmf > /dev/null 2>&1; then ++ # icc doesn't choke on unknown options, it will just issue warnings ++ # or remarks (even with -Werror). So we grep stderr for any message ++ # that says an option was ignored or not supported. ++ # When given -MP, icc 7.0 and 7.1 complain thusly: ++ # icc: Command line warning: ignoring option '-M'; no argument required ++ # The diagnosis changed in icc 8.0: ++ # icc: Command line remark: option '-MP' not supported ++ if (grep 'ignoring option' conftest.err || ++ grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else ++ am_cv_CC_dependencies_compiler_type=$depmode ++ break ++ fi ++ fi ++ done ++ ++ cd .. ++ rm -rf conftest.dir ++else ++ am_cv_CC_dependencies_compiler_type=none ++fi ++ ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5 ++$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; } ++CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type ++ ++ if ++ test "x$enable_dependency_tracking" != xno \ ++ && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then ++ am__fastdepCC_TRUE= ++ am__fastdepCC_FALSE='#' ++else ++ am__fastdepCC_TRUE='#' ++ am__fastdepCC_FALSE= ++fi ++ ++ ++if test "x$CC" != xcc; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC and cc understand -c and -o together" >&5 ++$as_echo_n "checking whether $CC and cc understand -c and -o together... " >&6; } ++else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether cc understands -c and -o together" >&5 ++$as_echo_n "checking whether cc understands -c and -o together... " >&6; } ++fi ++set dummy $CC; ac_cc=`$as_echo "$2" | ++ sed 's/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/'` ++if eval \${ac_cv_prog_cc_${ac_cc}_c_o+:} false; then : ++ $as_echo_n "(cached) " >&6 ++else ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++# Make sure it works both with $CC and with simple cc. ++# We do the test twice because some compilers refuse to overwrite an ++# existing .o file with -o, though they will create one. ++ac_try='$CC -c conftest.$ac_ext -o conftest2.$ac_objext >&5' ++rm -f conftest2.* ++if { { case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" ++$as_echo "$ac_try_echo"; } >&5 ++ (eval "$ac_try") 2>&5 ++ ac_status=$? ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; } && ++ test -f conftest2.$ac_objext && { { case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" ++$as_echo "$ac_try_echo"; } >&5 ++ (eval "$ac_try") 2>&5 ++ ac_status=$? ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; }; ++then ++ eval ac_cv_prog_cc_${ac_cc}_c_o=yes ++ if test "x$CC" != xcc; then ++ # Test first that cc exists at all. ++ if { ac_try='cc -c conftest.$ac_ext >&5' ++ { { case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" ++$as_echo "$ac_try_echo"; } >&5 ++ (eval "$ac_try") 2>&5 ++ ac_status=$? ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; }; }; then ++ ac_try='cc -c conftest.$ac_ext -o conftest2.$ac_objext >&5' ++ rm -f conftest2.* ++ if { { case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" ++$as_echo "$ac_try_echo"; } >&5 ++ (eval "$ac_try") 2>&5 ++ ac_status=$? ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; } && ++ test -f conftest2.$ac_objext && { { case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" ++$as_echo "$ac_try_echo"; } >&5 ++ (eval "$ac_try") 2>&5 ++ ac_status=$? ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; }; ++ then ++ # cc works too. ++ : ++ else ++ # cc exists but doesn't like -o. ++ eval ac_cv_prog_cc_${ac_cc}_c_o=no ++ fi ++ fi ++ fi ++else ++ eval ac_cv_prog_cc_${ac_cc}_c_o=no ++fi ++rm -f core conftest* ++ ++fi ++if eval test \$ac_cv_prog_cc_${ac_cc}_c_o = yes; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 ++$as_echo "yes" >&6; } ++else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } ++ ++$as_echo "@%:@define NO_MINUS_C_MINUS_O 1" >>confdefs.h ++ ++fi ++ ++# FIXME: we rely on the cache variable name because ++# there is no other way. ++set dummy $CC ++am_cc=`echo $2 | sed 's/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/'` ++eval am_t=\$ac_cv_prog_cc_${am_cc}_c_o ++if test "$am_t" != yes; then ++ # Losing compiler, so override with the script. ++ # FIXME: It is wrong to rewrite CC. ++ # But if we don't then we get into trouble of one sort or another. ++ # A longer-term fix would be to have automake use am__CC in this case, ++ # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" ++ CC="$am_aux_dir/compile $CC" ++fi ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then ++ if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}pkg-config", so it can be a program name with args. ++set dummy ${ac_tool_prefix}pkg-config; ac_word=$2 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if ${ac_cv_path_PKG_CONFIG+:} false; then : ++ $as_echo_n "(cached) " >&6 ++else ++ case $PKG_CONFIG in ++ [\\/]* | ?:[\\/]*) ++ ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a path. ++ ;; ++ *) ++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_path_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext" ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++ done ++IFS=$as_save_IFS ++ ++ ;; ++esac ++fi ++PKG_CONFIG=$ac_cv_path_PKG_CONFIG ++if test -n "$PKG_CONFIG"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PKG_CONFIG" >&5 ++$as_echo "$PKG_CONFIG" >&6; } ++else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } ++fi ++ ++ ++fi ++if test -z "$ac_cv_path_PKG_CONFIG"; then ++ ac_pt_PKG_CONFIG=$PKG_CONFIG ++ # Extract the first word of "pkg-config", so it can be a program name with args. ++set dummy pkg-config; ac_word=$2 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if ${ac_cv_path_ac_pt_PKG_CONFIG+:} false; then : ++ $as_echo_n "(cached) " >&6 ++else ++ case $ac_pt_PKG_CONFIG in ++ [\\/]* | ?:[\\/]*) ++ ac_cv_path_ac_pt_PKG_CONFIG="$ac_pt_PKG_CONFIG" # Let the user override the test with a path. ++ ;; ++ *) ++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_path_ac_pt_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext" ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++ done ++IFS=$as_save_IFS ++ ++ ;; ++esac ++fi ++ac_pt_PKG_CONFIG=$ac_cv_path_ac_pt_PKG_CONFIG ++if test -n "$ac_pt_PKG_CONFIG"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_pt_PKG_CONFIG" >&5 ++$as_echo "$ac_pt_PKG_CONFIG" >&6; } ++else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } ++fi ++ ++ if test "x$ac_pt_PKG_CONFIG" = x; then ++ PKG_CONFIG="" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 ++$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ++ac_tool_warned=yes ;; ++esac ++ PKG_CONFIG=$ac_pt_PKG_CONFIG ++ fi ++else ++ PKG_CONFIG="$ac_cv_path_PKG_CONFIG" ++fi ++ ++fi ++if test -n "$PKG_CONFIG"; then ++ _pkg_min_version=0.9.0 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking pkg-config is at least version $_pkg_min_version" >&5 ++$as_echo_n "checking pkg-config is at least version $_pkg_min_version... " >&6; } ++ if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 ++$as_echo "yes" >&6; } ++ else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } ++ PKG_CONFIG="" ++ fi ++fi ++ ++pkg_failed=no ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for HBAAPI" >&5 ++$as_echo_n "checking for HBAAPI... " >&6; } ++ ++if test -n "$HBAAPI_CFLAGS"; then ++ pkg_cv_HBAAPI_CFLAGS="$HBAAPI_CFLAGS" ++ elif test -n "$PKG_CONFIG"; then ++ if test -n "$PKG_CONFIG" && \ ++ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"HBAAPI\""; } >&5 ++ ($PKG_CONFIG --exists --print-errors "HBAAPI") 2>&5 ++ ac_status=$? ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; }; then ++ pkg_cv_HBAAPI_CFLAGS=`$PKG_CONFIG --cflags "HBAAPI" 2>/dev/null` ++ test "x$?" != "x0" && pkg_failed=yes ++else ++ pkg_failed=yes ++fi ++ else ++ pkg_failed=untried ++fi ++if test -n "$HBAAPI_LIBS"; then ++ pkg_cv_HBAAPI_LIBS="$HBAAPI_LIBS" ++ elif test -n "$PKG_CONFIG"; then ++ if test -n "$PKG_CONFIG" && \ ++ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"HBAAPI\""; } >&5 ++ ($PKG_CONFIG --exists --print-errors "HBAAPI") 2>&5 ++ ac_status=$? ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; }; then ++ pkg_cv_HBAAPI_LIBS=`$PKG_CONFIG --libs "HBAAPI" 2>/dev/null` ++ test "x$?" != "x0" && pkg_failed=yes ++else ++ pkg_failed=yes ++fi ++ else ++ pkg_failed=untried ++fi ++ ++ ++ ++if test $pkg_failed = yes; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } ++ ++if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then ++ _pkg_short_errors_supported=yes ++else ++ _pkg_short_errors_supported=no ++fi ++ if test $_pkg_short_errors_supported = yes; then ++ HBAAPI_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "HBAAPI" 2>&1` ++ else ++ HBAAPI_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "HBAAPI" 2>&1` ++ fi ++ # Put the nasty error message in config.log where it belongs ++ echo "$HBAAPI_PKG_ERRORS" >&5 ++ ++ as_fn_error $? "Package requirements (HBAAPI) were not met: ++ ++$HBAAPI_PKG_ERRORS ++ ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. ++ ++Alternatively, you may set the environment variables HBAAPI_CFLAGS ++and HBAAPI_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details." "$LINENO" 5 ++elif test $pkg_failed = untried; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } ++ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 ++$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} ++as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. ++ ++Alternatively, you may set the environment variables HBAAPI_CFLAGS ++and HBAAPI_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++ ++To get pkg-config, see . ++See \`config.log' for more details" "$LINENO" 5; } ++else ++ HBAAPI_CFLAGS=$pkg_cv_HBAAPI_CFLAGS ++ HBAAPI_LIBS=$pkg_cv_HBAAPI_LIBS ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 ++$as_echo "yes" >&6; } ++ ++fi ++ ++ ++ ++ ++@%:@ Check whether --with-dcb was given. ++if test "${with_dcb+set}" = set; then : ++ withval=$with_dcb; ++else ++ with_dcb=yes ++fi ++ ++ ++ if test "X$with_dcb" != Xno; then ++ WITH_DCB_TRUE= ++ WITH_DCB_FALSE='#' ++else ++ WITH_DCB_TRUE='#' ++ WITH_DCB_FALSE= ++fi ++ ++ ++if test "X$with_dcb" != Xno; then : ++ ++pkg_failed=no ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for DCBD" >&5 ++$as_echo_n "checking for DCBD... " >&6; } ++ ++if test -n "$DCBD_CFLAGS"; then ++ pkg_cv_DCBD_CFLAGS="$DCBD_CFLAGS" ++ elif test -n "$PKG_CONFIG"; then ++ if test -n "$PKG_CONFIG" && \ ++ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"dcbd\""; } >&5 ++ ($PKG_CONFIG --exists --print-errors "dcbd") 2>&5 ++ ac_status=$? ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; }; then ++ pkg_cv_DCBD_CFLAGS=`$PKG_CONFIG --cflags "dcbd" 2>/dev/null` ++ test "x$?" != "x0" && pkg_failed=yes ++else ++ pkg_failed=yes ++fi ++ else ++ pkg_failed=untried ++fi ++if test -n "$DCBD_LIBS"; then ++ pkg_cv_DCBD_LIBS="$DCBD_LIBS" ++ elif test -n "$PKG_CONFIG"; then ++ if test -n "$PKG_CONFIG" && \ ++ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"dcbd\""; } >&5 ++ ($PKG_CONFIG --exists --print-errors "dcbd") 2>&5 ++ ac_status=$? ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; }; then ++ pkg_cv_DCBD_LIBS=`$PKG_CONFIG --libs "dcbd" 2>/dev/null` ++ test "x$?" != "x0" && pkg_failed=yes ++else ++ pkg_failed=yes ++fi ++ else ++ pkg_failed=untried ++fi ++ ++ ++ ++if test $pkg_failed = yes; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } ++ ++if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then ++ _pkg_short_errors_supported=yes ++else ++ _pkg_short_errors_supported=no ++fi ++ if test $_pkg_short_errors_supported = yes; then ++ DCBD_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "dcbd" 2>&1` ++ else ++ DCBD_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "dcbd" 2>&1` ++ fi ++ # Put the nasty error message in config.log where it belongs ++ echo "$DCBD_PKG_ERRORS" >&5 ++ ++ as_fn_error $? "Package requirements (dcbd) were not met: ++ ++$DCBD_PKG_ERRORS ++ ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. ++ ++Alternatively, you may set the environment variables DCBD_CFLAGS ++and DCBD_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details." "$LINENO" 5 ++elif test $pkg_failed = untried; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } ++ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 ++$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} ++as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. ++ ++Alternatively, you may set the environment variables DCBD_CFLAGS ++and DCBD_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++ ++To get pkg-config, see . ++See \`config.log' for more details" "$LINENO" 5; } ++else ++ DCBD_CFLAGS=$pkg_cv_DCBD_CFLAGS ++ DCBD_LIBS=$pkg_cv_DCBD_LIBS ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 ++$as_echo "yes" >&6; } ++ ++fi ++ ++fi ++ ++ac_config_files="$ac_config_files Makefile fcoeplumb fcoe-utils.spec fcoe_utils.h" ++ ++cat >confcache <<\_ACEOF ++# This file is a shell script that caches the results of configure ++# tests run on this system so they can be shared between configure ++# scripts and configure runs, see configure's option --config-cache. ++# It is not useful on other systems. If it contains results you don't ++# want to keep, you may remove or edit it. ++# ++# config.status only pays attention to the cache file if you give it ++# the --recheck option to rerun configure. ++# ++# `ac_cv_env_foo' variables (set or unset) will be overridden when ++# loading this file, other *unset* `ac_cv_foo' will be assigned the ++# following values. ++ ++_ACEOF ++ ++# The following way of writing the cache mishandles newlines in values, ++# but we know of no workaround that is simple, portable, and efficient. ++# So, we kill variables containing newlines. ++# Ultrix sh set writes to stderr and can't be redirected directly, ++# and sets the high bit in the cache file unless we assign to the vars. ++( ++ for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do ++ eval ac_val=\$$ac_var ++ case $ac_val in #( ++ *${as_nl}*) ++ case $ac_var in #( ++ *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 ++$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; ++ esac ++ case $ac_var in #( ++ _ | IFS | as_nl) ;; #( ++ BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( ++ *) { eval $ac_var=; unset $ac_var;} ;; ++ esac ;; ++ esac ++ done ++ ++ (set) 2>&1 | ++ case $as_nl`(ac_space=' '; set) 2>&1` in #( ++ *${as_nl}ac_space=\ *) ++ # `set' does not quote correctly, so add quotes: double-quote ++ # substitution turns \\\\ into \\, and sed turns \\ into \. ++ sed -n \ ++ "s/'/'\\\\''/g; ++ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" ++ ;; #( ++ *) ++ # `set' quotes correctly as required by POSIX, so do not add quotes. ++ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" ++ ;; ++ esac | ++ sort ++) | ++ sed ' ++ /^ac_cv_env_/b end ++ t clear ++ :clear ++ s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ ++ t end ++ s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ ++ :end' >>confcache ++if diff "$cache_file" confcache >/dev/null 2>&1; then :; else ++ if test -w "$cache_file"; then ++ if test "x$cache_file" != "x/dev/null"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5 ++$as_echo "$as_me: updating cache $cache_file" >&6;} ++ if test ! -f "$cache_file" || test -h "$cache_file"; then ++ cat confcache >"$cache_file" ++ else ++ case $cache_file in #( ++ */* | ?:*) ++ mv -f confcache "$cache_file"$$ && ++ mv -f "$cache_file"$$ "$cache_file" ;; #( ++ *) ++ mv -f confcache "$cache_file" ;; ++ esac ++ fi ++ fi ++ else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5 ++$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;} ++ fi ++fi ++rm -f confcache ++ ++test "x$prefix" = xNONE && prefix=$ac_default_prefix ++# Let make expand exec_prefix. ++test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' ++ ++# Transform confdefs.h into DEFS. ++# Protect against shell expansion while executing Makefile rules. ++# Protect against Makefile macro expansion. ++# ++# If the first sed substitution is executed (which looks for macros that ++# take arguments), then branch to the quote section. Otherwise, ++# look for a macro that doesn't take arguments. ++ac_script=' ++:mline ++/\\$/{ ++ N ++ s,\\\n,, ++ b mline ++} ++t clear ++:clear ++s/^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\)/-D\1=\2/g ++t quote ++s/^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)/-D\1=\2/g ++t quote ++b any ++:quote ++s/[ `~#$^&*(){}\\|;'\''"<>?]/\\&/g ++s/\[/\\&/g ++s/\]/\\&/g ++s/\$/$$/g ++H ++:any ++${ ++ g ++ s/^\n// ++ s/\n/ /g ++ p ++} ++' ++DEFS=`sed -n "$ac_script" confdefs.h` ++ ++ ++ac_libobjs= ++ac_ltlibobjs= ++U= ++for ac_i in : $LIB@&t@OBJS; do test "x$ac_i" = x: && continue ++ # 1. Remove the extension, and $U if already installed. ++ ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' ++ ac_i=`$as_echo "$ac_i" | sed "$ac_script"` ++ # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR ++ # will be set to the directory where LIBOBJS objects are built. ++ as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext" ++ as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo' ++done ++LIB@&t@OBJS=$ac_libobjs ++ ++LTLIBOBJS=$ac_ltlibobjs ++ ++ ++ if test -n "$EXEEXT"; then ++ am__EXEEXT_TRUE= ++ am__EXEEXT_FALSE='#' ++else ++ am__EXEEXT_TRUE='#' ++ am__EXEEXT_FALSE= ++fi ++ ++if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then ++ as_fn_error $? "conditional \"AMDEP\" was never defined. ++Usually this means the macro was only invoked conditionally." "$LINENO" 5 ++fi ++if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then ++ as_fn_error $? "conditional \"am__fastdepCC\" was never defined. ++Usually this means the macro was only invoked conditionally." "$LINENO" 5 ++fi ++if test -z "${WITH_DCB_TRUE}" && test -z "${WITH_DCB_FALSE}"; then ++ as_fn_error $? "conditional \"WITH_DCB\" was never defined. ++Usually this means the macro was only invoked conditionally." "$LINENO" 5 ++fi ++ ++: "${CONFIG_STATUS=./config.status}" ++ac_write_fail=0 ++ac_clean_files_save=$ac_clean_files ++ac_clean_files="$ac_clean_files $CONFIG_STATUS" ++{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5 ++$as_echo "$as_me: creating $CONFIG_STATUS" >&6;} ++as_write_fail=0 ++cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1 ++#! $SHELL ++# Generated by $as_me. ++# Run this file to recreate the current configuration. ++# Compiler output produced by configure, useful for debugging ++# configure, is in config.log if it exists. ++ ++debug=false ++ac_cs_recheck=false ++ac_cs_silent=false ++ ++SHELL=\${CONFIG_SHELL-$SHELL} ++export SHELL ++_ASEOF ++cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1 ++## -------------------- ## ++## M4sh Initialization. ## ++## -------------------- ## ++ ++# Be more Bourne compatible ++DUALCASE=1; export DUALCASE # for MKS sh ++if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : ++ emulate sh ++ NULLCMD=: ++ # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which ++ # is contrary to our usage. Disable this feature. ++ alias -g '${1+"$@"}'='"$@"' ++ setopt NO_GLOB_SUBST ++else ++ case `(set -o) 2>/dev/null` in @%:@( ++ *posix*) : ++ set -o posix ;; @%:@( ++ *) : ++ ;; ++esac ++fi ++ ++ ++as_nl=' ++' ++export as_nl ++# Printing a long string crashes Solaris 7 /usr/bin/printf. ++as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' ++as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo ++as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo ++# Prefer a ksh shell builtin over an external printf program on Solaris, ++# but without wasting forks for bash or zsh. ++if test -z "$BASH_VERSION$ZSH_VERSION" \ ++ && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then ++ as_echo='print -r --' ++ as_echo_n='print -rn --' ++elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then ++ as_echo='printf %s\n' ++ as_echo_n='printf %s' ++else ++ if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then ++ as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' ++ as_echo_n='/usr/ucb/echo -n' ++ else ++ as_echo_body='eval expr "X$1" : "X\\(.*\\)"' ++ as_echo_n_body='eval ++ arg=$1; ++ case $arg in @%:@( ++ *"$as_nl"*) ++ expr "X$arg" : "X\\(.*\\)$as_nl"; ++ arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; ++ esac; ++ expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" ++ ' ++ export as_echo_n_body ++ as_echo_n='sh -c $as_echo_n_body as_echo' ++ fi ++ export as_echo_body ++ as_echo='sh -c $as_echo_body as_echo' ++fi ++ ++# The user is always right. ++if test "${PATH_SEPARATOR+set}" != set; then ++ PATH_SEPARATOR=: ++ (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { ++ (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || ++ PATH_SEPARATOR=';' ++ } ++fi ++ ++ ++# IFS ++# We need space, tab and new line, in precisely that order. Quoting is ++# there to prevent editors from complaining about space-tab. ++# (If _AS_PATH_WALK were called with IFS unset, it would disable word ++# splitting by setting IFS to empty value.) ++IFS=" "" $as_nl" ++ ++# Find who we are. Look in the path if we contain no directory separator. ++as_myself= ++case $0 in @%:@(( ++ *[\\/]* ) as_myself=$0 ;; ++ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break ++ done ++IFS=$as_save_IFS ++ ++ ;; ++esac ++# We did not find ourselves, most probably we were run as `sh COMMAND' ++# in which case we are not to be found in the path. ++if test "x$as_myself" = x; then ++ as_myself=$0 ++fi ++if test ! -f "$as_myself"; then ++ $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 ++ exit 1 ++fi ++ ++# Unset variables that we do not need and which cause bugs (e.g. in ++# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" ++# suppresses any "Segmentation fault" message there. '((' could ++# trigger a bug in pdksh 5.2.14. ++for as_var in BASH_ENV ENV MAIL MAILPATH ++do eval test x\${$as_var+set} = xset \ ++ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : ++done ++PS1='$ ' ++PS2='> ' ++PS4='+ ' ++ ++# NLS nuisances. ++LC_ALL=C ++export LC_ALL ++LANGUAGE=C ++export LANGUAGE ++ ++# CDPATH. ++(unset CDPATH) >/dev/null 2>&1 && unset CDPATH ++ ++ ++@%:@ as_fn_error STATUS ERROR [LINENO LOG_FD] ++@%:@ ---------------------------------------- ++@%:@ Output "`basename @S|@0`: error: ERROR" to stderr. If LINENO and LOG_FD are ++@%:@ provided, also output the error to LOG_FD, referencing LINENO. Then exit the ++@%:@ script with STATUS, using 1 if that was 0. ++as_fn_error () ++{ ++ as_status=$1; test $as_status -eq 0 && as_status=1 ++ if test "$4"; then ++ as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack ++ $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 ++ fi ++ $as_echo "$as_me: error: $2" >&2 ++ as_fn_exit $as_status ++} @%:@ as_fn_error ++ ++ ++@%:@ as_fn_set_status STATUS ++@%:@ ----------------------- ++@%:@ Set @S|@? to STATUS, without forking. ++as_fn_set_status () ++{ ++ return $1 ++} @%:@ as_fn_set_status ++ ++@%:@ as_fn_exit STATUS ++@%:@ ----------------- ++@%:@ Exit the shell with STATUS, even in a "trap 0" or "set -e" context. ++as_fn_exit () ++{ ++ set +e ++ as_fn_set_status $1 ++ exit $1 ++} @%:@ as_fn_exit ++ ++@%:@ as_fn_unset VAR ++@%:@ --------------- ++@%:@ Portably unset VAR. ++as_fn_unset () ++{ ++ { eval $1=; unset $1;} ++} ++as_unset=as_fn_unset ++@%:@ as_fn_append VAR VALUE ++@%:@ ---------------------- ++@%:@ Append the text in VALUE to the end of the definition contained in VAR. Take ++@%:@ advantage of any shell optimizations that allow amortized linear growth over ++@%:@ repeated appends, instead of the typical quadratic growth present in naive ++@%:@ implementations. ++if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : ++ eval 'as_fn_append () ++ { ++ eval $1+=\$2 ++ }' ++else ++ as_fn_append () ++ { ++ eval $1=\$$1\$2 ++ } ++fi # as_fn_append ++ ++@%:@ as_fn_arith ARG... ++@%:@ ------------------ ++@%:@ Perform arithmetic evaluation on the ARGs, and store the result in the ++@%:@ global @S|@as_val. Take advantage of shells that can avoid forks. The arguments ++@%:@ must be portable across @S|@(()) and expr. ++if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : ++ eval 'as_fn_arith () ++ { ++ as_val=$(( $* )) ++ }' ++else ++ as_fn_arith () ++ { ++ as_val=`expr "$@" || test $? -eq 1` ++ } ++fi # as_fn_arith ++ ++ ++if expr a : '\(a\)' >/dev/null 2>&1 && ++ test "X`expr 00001 : '.*\(...\)'`" = X001; then ++ as_expr=expr ++else ++ as_expr=false ++fi ++ ++if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then ++ as_basename=basename ++else ++ as_basename=false ++fi ++ ++if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then ++ as_dirname=dirname ++else ++ as_dirname=false ++fi ++ ++as_me=`$as_basename -- "$0" || ++$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ ++ X"$0" : 'X\(//\)$' \| \ ++ X"$0" : 'X\(/\)' \| . 2>/dev/null || ++$as_echo X/"$0" | ++ sed '/^.*\/\([^/][^/]*\)\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\/\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\/\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` ++ ++# Avoid depending upon Character Ranges. ++as_cr_letters='abcdefghijklmnopqrstuvwxyz' ++as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' ++as_cr_Letters=$as_cr_letters$as_cr_LETTERS ++as_cr_digits='0123456789' ++as_cr_alnum=$as_cr_Letters$as_cr_digits ++ ++ECHO_C= ECHO_N= ECHO_T= ++case `echo -n x` in @%:@((((( ++-n*) ++ case `echo 'xy\c'` in ++ *c*) ECHO_T=' ';; # ECHO_T is single tab character. ++ xy) ECHO_C='\c';; ++ *) echo `echo ksh88 bug on AIX 6.1` > /dev/null ++ ECHO_T=' ';; ++ esac;; ++*) ++ ECHO_N='-n';; ++esac ++ ++rm -f conf$$ conf$$.exe conf$$.file ++if test -d conf$$.dir; then ++ rm -f conf$$.dir/conf$$.file ++else ++ rm -f conf$$.dir ++ mkdir conf$$.dir 2>/dev/null ++fi ++if (echo >conf$$.file) 2>/dev/null; then ++ if ln -s conf$$.file conf$$ 2>/dev/null; then ++ as_ln_s='ln -s' ++ # ... but there are two gotchas: ++ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. ++ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. ++ # In both cases, we have to default to `cp -p'. ++ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || ++ as_ln_s='cp -p' ++ elif ln conf$$.file conf$$ 2>/dev/null; then ++ as_ln_s=ln ++ else ++ as_ln_s='cp -p' ++ fi ++else ++ as_ln_s='cp -p' ++fi ++rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file ++rmdir conf$$.dir 2>/dev/null ++ ++ ++@%:@ as_fn_mkdir_p ++@%:@ ------------- ++@%:@ Create "@S|@as_dir" as a directory, including parents if necessary. ++as_fn_mkdir_p () ++{ ++ ++ case $as_dir in #( ++ -*) as_dir=./$as_dir;; ++ esac ++ test -d "$as_dir" || eval $as_mkdir_p || { ++ as_dirs= ++ while :; do ++ case $as_dir in #( ++ *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( ++ *) as_qdir=$as_dir;; ++ esac ++ as_dirs="'$as_qdir' $as_dirs" ++ as_dir=`$as_dirname -- "$as_dir" || ++$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ ++ X"$as_dir" : 'X\(//\)[^/]' \| \ ++ X"$as_dir" : 'X\(//\)$' \| \ ++ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || ++$as_echo X"$as_dir" | ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)[^/].*/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` ++ test -d "$as_dir" && break ++ done ++ test -z "$as_dirs" || eval "mkdir $as_dirs" ++ } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" ++ ++ ++} @%:@ as_fn_mkdir_p ++if mkdir -p . 2>/dev/null; then ++ as_mkdir_p='mkdir -p "$as_dir"' ++else ++ test -d ./-p && rmdir ./-p ++ as_mkdir_p=false ++fi ++ ++if test -x / >/dev/null 2>&1; then ++ as_test_x='test -x' ++else ++ if ls -dL / >/dev/null 2>&1; then ++ as_ls_L_option=L ++ else ++ as_ls_L_option= ++ fi ++ as_test_x=' ++ eval sh -c '\'' ++ if test -d "$1"; then ++ test -d "$1/."; ++ else ++ case $1 in @%:@( ++ -*)set "./$1";; ++ esac; ++ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in @%:@(( ++ ???[sx]*):;;*)false;;esac;fi ++ '\'' sh ++ ' ++fi ++as_executable_p=$as_test_x ++ ++# Sed expression to map a string onto a valid CPP name. ++as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" ++ ++# Sed expression to map a string onto a valid variable name. ++as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" ++ ++ ++exec 6>&1 ++## ----------------------------------- ## ++## Main body of $CONFIG_STATUS script. ## ++## ----------------------------------- ## ++_ASEOF ++test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1 ++ ++cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 ++# Save the log message, to keep $0 and so on meaningful, and to ++# report actual input values of CONFIG_FILES etc. instead of their ++# values after options handling. ++ac_log=" ++This file was extended by fcoe-utils $as_me 1.0.9, which was ++generated by GNU Autoconf 2.68. Invocation command line was ++ ++ CONFIG_FILES = $CONFIG_FILES ++ CONFIG_HEADERS = $CONFIG_HEADERS ++ CONFIG_LINKS = $CONFIG_LINKS ++ CONFIG_COMMANDS = $CONFIG_COMMANDS ++ $ $0 $@ ++ ++on `(hostname || uname -n) 2>/dev/null | sed 1q` ++" ++ ++_ACEOF ++ ++case $ac_config_files in *" ++"*) set x $ac_config_files; shift; ac_config_files=$*;; ++esac ++ ++ ++ ++cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ++# Files that config.status was made for. ++config_files="$ac_config_files" ++config_commands="$ac_config_commands" ++ ++_ACEOF ++ ++cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 ++ac_cs_usage="\ ++\`$as_me' instantiates files and other configuration actions ++from templates according to the current configuration. Unless the files ++and actions are specified as TAGs, all are instantiated by default. ++ ++Usage: $0 [OPTION]... [TAG]... ++ ++ -h, --help print this help, then exit ++ -V, --version print version number and configuration settings, then exit ++ --config print configuration, then exit ++ -q, --quiet, --silent ++ do not print progress messages ++ -d, --debug don't remove temporary files ++ --recheck update $as_me by reconfiguring in the same conditions ++ --file=FILE[:TEMPLATE] ++ instantiate the configuration file FILE ++ ++Configuration files: ++$config_files ++ ++Configuration commands: ++$config_commands ++ ++Report bugs to ." ++ ++_ACEOF ++cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ++ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" ++ac_cs_version="\\ ++fcoe-utils config.status 1.0.9 ++configured by $0, generated by GNU Autoconf 2.68, ++ with options \\"\$ac_cs_config\\" ++ ++Copyright (C) 2010 Free Software Foundation, Inc. ++This config.status script is free software; the Free Software Foundation ++gives unlimited permission to copy, distribute and modify it." ++ ++ac_pwd='$ac_pwd' ++srcdir='$srcdir' ++INSTALL='$INSTALL' ++MKDIR_P='$MKDIR_P' ++AWK='$AWK' ++test -n "\$AWK" || AWK=awk ++_ACEOF ++ ++cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 ++# The default lists apply if the user does not specify any file. ++ac_need_defaults=: ++while test $# != 0 ++do ++ case $1 in ++ --*=?*) ++ ac_option=`expr "X$1" : 'X\([^=]*\)='` ++ ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` ++ ac_shift=: ++ ;; ++ --*=) ++ ac_option=`expr "X$1" : 'X\([^=]*\)='` ++ ac_optarg= ++ ac_shift=: ++ ;; ++ *) ++ ac_option=$1 ++ ac_optarg=$2 ++ ac_shift=shift ++ ;; ++ esac ++ ++ case $ac_option in ++ # Handling of the options. ++ -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) ++ ac_cs_recheck=: ;; ++ --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) ++ $as_echo "$ac_cs_version"; exit ;; ++ --config | --confi | --conf | --con | --co | --c ) ++ $as_echo "$ac_cs_config"; exit ;; ++ --debug | --debu | --deb | --de | --d | -d ) ++ debug=: ;; ++ --file | --fil | --fi | --f ) ++ $ac_shift ++ case $ac_optarg in ++ *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; ++ '') as_fn_error $? "missing file argument" ;; ++ esac ++ as_fn_append CONFIG_FILES " '$ac_optarg'" ++ ac_need_defaults=false;; ++ --he | --h | --help | --hel | -h ) ++ $as_echo "$ac_cs_usage"; exit ;; ++ -q | -quiet | --quiet | --quie | --qui | --qu | --q \ ++ | -silent | --silent | --silen | --sile | --sil | --si | --s) ++ ac_cs_silent=: ;; ++ ++ # This is an error. ++ -*) as_fn_error $? "unrecognized option: \`$1' ++Try \`$0 --help' for more information." ;; ++ ++ *) as_fn_append ac_config_targets " $1" ++ ac_need_defaults=false ;; ++ ++ esac ++ shift ++done ++ ++ac_configure_extra_args= ++ ++if $ac_cs_silent; then ++ exec 6>/dev/null ++ ac_configure_extra_args="$ac_configure_extra_args --silent" ++fi ++ ++_ACEOF ++cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ++if \$ac_cs_recheck; then ++ set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion ++ shift ++ \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6 ++ CONFIG_SHELL='$SHELL' ++ export CONFIG_SHELL ++ exec "\$@" ++fi ++ ++_ACEOF ++cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 ++exec 5>>config.log ++{ ++ echo ++ sed 'h;s/./-/g;s/^.../@%:@@%:@ /;s/...$/ @%:@@%:@/;p;x;p;x' <<_ASBOX ++@%:@@%:@ Running $as_me. @%:@@%:@ ++_ASBOX ++ $as_echo "$ac_log" ++} >&5 ++ ++_ACEOF ++cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ++# ++# INIT-COMMANDS ++# ++AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" ++ ++_ACEOF ++ ++cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 ++ ++# Handling of arguments. ++for ac_config_target in $ac_config_targets ++do ++ case $ac_config_target in ++ "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; ++ "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; ++ "fcoeplumb") CONFIG_FILES="$CONFIG_FILES fcoeplumb" ;; ++ "fcoe-utils.spec") CONFIG_FILES="$CONFIG_FILES fcoe-utils.spec" ;; ++ "fcoe_utils.h") CONFIG_FILES="$CONFIG_FILES fcoe_utils.h" ;; ++ ++ *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;; ++ esac ++done ++ ++ ++# If the user did not use the arguments to specify the items to instantiate, ++# then the envvar interface is used. Set only those that are not. ++# We use the long form for the default assignment because of an extremely ++# bizarre bug on SunOS 4.1.3. ++if $ac_need_defaults; then ++ test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files ++ test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands ++fi ++ ++# Have a temporary directory for convenience. Make it in the build tree ++# simply because there is no reason against having it here, and in addition, ++# creating and moving files from /tmp can sometimes cause problems. ++# Hook for its removal unless debugging. ++# Note that there is a small window in which the directory will not be cleaned: ++# after its creation but before its name has been assigned to `$tmp'. ++$debug || ++{ ++ tmp= ac_tmp= ++ trap 'exit_status=$? ++ : "${ac_tmp:=$tmp}" ++ { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status ++' 0 ++ trap 'as_fn_exit 1' 1 2 13 15 ++} ++# Create a (secure) tmp directory for tmp files. ++ ++{ ++ tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && ++ test -d "$tmp" ++} || ++{ ++ tmp=./conf$$-$RANDOM ++ (umask 077 && mkdir "$tmp") ++} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5 ++ac_tmp=$tmp ++ ++# Set up the scripts for CONFIG_FILES section. ++# No need to generate them if there are no CONFIG_FILES. ++# This happens for instance with `./config.status config.h'. ++if test -n "$CONFIG_FILES"; then ++ ++ ++ac_cr=`echo X | tr X '\015'` ++# On cygwin, bash can eat \r inside `` if the user requested igncr. ++# But we know of no other shell where ac_cr would be empty at this ++# point, so we can use a bashism as a fallback. ++if test "x$ac_cr" = x; then ++ eval ac_cr=\$\'\\r\' ++fi ++ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null` ++if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then ++ ac_cs_awk_cr='\\r' ++else ++ ac_cs_awk_cr=$ac_cr ++fi ++ ++echo 'BEGIN {' >"$ac_tmp/subs1.awk" && ++_ACEOF ++ ++ ++{ ++ echo "cat >conf$$subs.awk <<_ACEOF" && ++ echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && ++ echo "_ACEOF" ++} >conf$$subs.sh || ++ as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 ++ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'` ++ac_delim='%!_!# ' ++for ac_last_try in false false false false false :; do ++ . ./conf$$subs.sh || ++ as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 ++ ++ ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` ++ if test $ac_delim_n = $ac_delim_num; then ++ break ++ elif $ac_last_try; then ++ as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 ++ else ++ ac_delim="$ac_delim!$ac_delim _$ac_delim!! " ++ fi ++done ++rm -f conf$$subs.sh ++ ++cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ++cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK && ++_ACEOF ++sed -n ' ++h ++s/^/S["/; s/!.*/"]=/ ++p ++g ++s/^[^!]*!// ++:repl ++t repl ++s/'"$ac_delim"'$// ++t delim ++:nl ++h ++s/\(.\{148\}\)..*/\1/ ++t more1 ++s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/ ++p ++n ++b repl ++:more1 ++s/["\\]/\\&/g; s/^/"/; s/$/"\\/ ++p ++g ++s/.\{148\}// ++t nl ++:delim ++h ++s/\(.\{148\}\)..*/\1/ ++t more2 ++s/["\\]/\\&/g; s/^/"/; s/$/"/ ++p ++b ++:more2 ++s/["\\]/\\&/g; s/^/"/; s/$/"\\/ ++p ++g ++s/.\{148\}// ++t delim ++' >$CONFIG_STATUS || ac_write_fail=1 ++rm -f conf$$subs.awk ++cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ++_ACAWK ++cat >>"\$ac_tmp/subs1.awk" <<_ACAWK && ++ for (key in S) S_is_set[key] = 1 ++ FS = "" ++ ++} ++{ ++ line = $ 0 ++ nfields = split(line, field, "@") ++ substed = 0 ++ len = length(field[1]) ++ for (i = 2; i < nfields; i++) { ++ key = field[i] ++ keylen = length(key) ++ if (S_is_set[key]) { ++ value = S[key] ++ line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3) ++ len += length(value) + length(field[++i]) ++ substed = 1 ++ } else ++ len += 1 + keylen ++ } ++ ++ print line ++} ++ ++_ACAWK ++_ACEOF ++cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 ++if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then ++ sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" ++else ++ cat ++fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \ ++ || as_fn_error $? "could not setup config files machinery" "$LINENO" 5 ++_ACEOF ++ ++# VPATH may cause trouble with some makes, so we remove sole $(srcdir), ++# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and ++# trailing colons and then remove the whole line if VPATH becomes empty ++# (actually we leave an empty line to preserve line numbers). ++if test "x$srcdir" = x.; then ++ ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{ ++h ++s/// ++s/^/:/ ++s/[ ]*$/:/ ++s/:\$(srcdir):/:/g ++s/:\${srcdir}:/:/g ++s/:@srcdir@:/:/g ++s/^:*// ++s/:*$// ++x ++s/\(=[ ]*\).*/\1/ ++G ++s/\n// ++s/^[^=]*=[ ]*$// ++}' ++fi ++ ++cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 ++fi # test -n "$CONFIG_FILES" ++ ++ ++eval set X " :F $CONFIG_FILES :C $CONFIG_COMMANDS" ++shift ++for ac_tag ++do ++ case $ac_tag in ++ :[FHLC]) ac_mode=$ac_tag; continue;; ++ esac ++ case $ac_mode$ac_tag in ++ :[FHL]*:*);; ++ :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;; ++ :[FH]-) ac_tag=-:-;; ++ :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; ++ esac ++ ac_save_IFS=$IFS ++ IFS=: ++ set x $ac_tag ++ IFS=$ac_save_IFS ++ shift ++ ac_file=$1 ++ shift ++ ++ case $ac_mode in ++ :L) ac_source=$1;; ++ :[FH]) ++ ac_file_inputs= ++ for ac_f ++ do ++ case $ac_f in ++ -) ac_f="$ac_tmp/stdin";; ++ *) # Look for the file first in the build tree, then in the source tree ++ # (if the path is not absolute). The absolute path cannot be DOS-style, ++ # because $ac_f cannot contain `:'. ++ test -f "$ac_f" || ++ case $ac_f in ++ [\\/$]*) false;; ++ *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; ++ esac || ++ as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;; ++ esac ++ case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac ++ as_fn_append ac_file_inputs " '$ac_f'" ++ done ++ ++ # Let's still pretend it is `configure' which instantiates (i.e., don't ++ # use $as_me), people would be surprised to read: ++ # /* config.h. Generated by config.status. */ ++ configure_input='Generated from '` ++ $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g' ++ `' by configure.' ++ if test x"$ac_file" != x-; then ++ configure_input="$ac_file. $configure_input" ++ { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5 ++$as_echo "$as_me: creating $ac_file" >&6;} ++ fi ++ # Neutralize special characters interpreted by sed in replacement strings. ++ case $configure_input in #( ++ *\&* | *\|* | *\\* ) ++ ac_sed_conf_input=`$as_echo "$configure_input" | ++ sed 's/[\\\\&|]/\\\\&/g'`;; #( ++ *) ac_sed_conf_input=$configure_input;; ++ esac ++ ++ case $ac_tag in ++ *:-:* | *:-) cat >"$ac_tmp/stdin" \ ++ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; ++ esac ++ ;; ++ esac ++ ++ ac_dir=`$as_dirname -- "$ac_file" || ++$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ ++ X"$ac_file" : 'X\(//\)[^/]' \| \ ++ X"$ac_file" : 'X\(//\)$' \| \ ++ X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || ++$as_echo X"$ac_file" | ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)[^/].*/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` ++ as_dir="$ac_dir"; as_fn_mkdir_p ++ ac_builddir=. ++ ++case "$ac_dir" in ++.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; ++*) ++ ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` ++ # A ".." for each directory in $ac_dir_suffix. ++ ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` ++ case $ac_top_builddir_sub in ++ "") ac_top_builddir_sub=. ac_top_build_prefix= ;; ++ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; ++ esac ;; ++esac ++ac_abs_top_builddir=$ac_pwd ++ac_abs_builddir=$ac_pwd$ac_dir_suffix ++# for backward compatibility: ++ac_top_builddir=$ac_top_build_prefix ++ ++case $srcdir in ++ .) # We are building in place. ++ ac_srcdir=. ++ ac_top_srcdir=$ac_top_builddir_sub ++ ac_abs_top_srcdir=$ac_pwd ;; ++ [\\/]* | ?:[\\/]* ) # Absolute name. ++ ac_srcdir=$srcdir$ac_dir_suffix; ++ ac_top_srcdir=$srcdir ++ ac_abs_top_srcdir=$srcdir ;; ++ *) # Relative name. ++ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix ++ ac_top_srcdir=$ac_top_build_prefix$srcdir ++ ac_abs_top_srcdir=$ac_pwd/$srcdir ;; ++esac ++ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix ++ ++ ++ case $ac_mode in ++ :F) ++ # ++ # CONFIG_FILE ++ # ++ ++ case $INSTALL in ++ [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; ++ *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; ++ esac ++ ac_MKDIR_P=$MKDIR_P ++ case $MKDIR_P in ++ [\\/$]* | ?:[\\/]* ) ;; ++ */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;; ++ esac ++_ACEOF ++ ++cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 ++# If the template does not know about datarootdir, expand it. ++# FIXME: This hack should be removed a few years after 2.60. ++ac_datarootdir_hack=; ac_datarootdir_seen= ++ac_sed_dataroot=' ++/datarootdir/ { ++ p ++ q ++} ++/@datadir@/p ++/@docdir@/p ++/@infodir@/p ++/@localedir@/p ++/@mandir@/p' ++case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in ++*datarootdir*) ac_datarootdir_seen=yes;; ++*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) ++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 ++$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} ++_ACEOF ++cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ++ ac_datarootdir_hack=' ++ s&@datadir@&$datadir&g ++ s&@docdir@&$docdir&g ++ s&@infodir@&$infodir&g ++ s&@localedir@&$localedir&g ++ s&@mandir@&$mandir&g ++ s&\\\${datarootdir}&$datarootdir&g' ;; ++esac ++_ACEOF ++ ++# Neutralize VPATH when `$srcdir' = `.'. ++# Shell code in configure.ac might set extrasub. ++# FIXME: do we really want to maintain this feature? ++cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ++ac_sed_extra="$ac_vpsub ++$extrasub ++_ACEOF ++cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 ++:t ++/@[a-zA-Z_][a-zA-Z_0-9]*@/!b ++s|@configure_input@|$ac_sed_conf_input|;t t ++s&@top_builddir@&$ac_top_builddir_sub&;t t ++s&@top_build_prefix@&$ac_top_build_prefix&;t t ++s&@srcdir@&$ac_srcdir&;t t ++s&@abs_srcdir@&$ac_abs_srcdir&;t t ++s&@top_srcdir@&$ac_top_srcdir&;t t ++s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t ++s&@builddir@&$ac_builddir&;t t ++s&@abs_builddir@&$ac_abs_builddir&;t t ++s&@abs_top_builddir@&$ac_abs_top_builddir&;t t ++s&@INSTALL@&$ac_INSTALL&;t t ++s&@MKDIR_P@&$ac_MKDIR_P&;t t ++$ac_datarootdir_hack ++" ++eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \ ++ >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ++ ++test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && ++ { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } && ++ { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \ ++ "$ac_tmp/out"`; test -z "$ac_out"; } && ++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir' ++which seems to be undefined. Please make sure it is defined" >&5 ++$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' ++which seems to be undefined. Please make sure it is defined" >&2;} ++ ++ rm -f "$ac_tmp/stdin" ++ case $ac_file in ++ -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";; ++ *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";; ++ esac \ ++ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ++ ;; ++ ++ ++ :C) { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5 ++$as_echo "$as_me: executing $ac_file commands" >&6;} ++ ;; ++ esac ++ ++ ++ case $ac_file$ac_mode in ++ "depfiles":C) test x"$AMDEP_TRUE" != x"" || { ++ # Autoconf 2.62 quotes --file arguments for eval, but not when files ++ # are listed without --file. Let's play safe and only enable the eval ++ # if we detect the quoting. ++ case $CONFIG_FILES in ++ *\'*) eval set x "$CONFIG_FILES" ;; ++ *) set x $CONFIG_FILES ;; ++ esac ++ shift ++ for mf ++ do ++ # Strip MF so we end up with the name of the file. ++ mf=`echo "$mf" | sed -e 's/:.*$//'` ++ # Check whether this is an Automake generated Makefile or not. ++ # We used to match only the files named `Makefile.in', but ++ # some people rename them; so instead we look at the file content. ++ # Grep'ing the first line is not enough: some people post-process ++ # each Makefile.in and add a new line on top of each file to say so. ++ # Grep'ing the whole file is not good either: AIX grep has a line ++ # limit of 2048, but all sed's we know have understand at least 4000. ++ if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then ++ dirpart=`$as_dirname -- "$mf" || ++$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ ++ X"$mf" : 'X\(//\)[^/]' \| \ ++ X"$mf" : 'X\(//\)$' \| \ ++ X"$mf" : 'X\(/\)' \| . 2>/dev/null || ++$as_echo X"$mf" | ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)[^/].*/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` ++ else ++ continue ++ fi ++ # Extract the definition of DEPDIR, am__include, and am__quote ++ # from the Makefile without running `make'. ++ DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` ++ test -z "$DEPDIR" && continue ++ am__include=`sed -n 's/^am__include = //p' < "$mf"` ++ test -z "am__include" && continue ++ am__quote=`sed -n 's/^am__quote = //p' < "$mf"` ++ # When using ansi2knr, U may be empty or an underscore; expand it ++ U=`sed -n 's/^U = //p' < "$mf"` ++ # Find all dependency output files, they are included files with ++ # $(DEPDIR) in their names. We invoke sed twice because it is the ++ # simplest approach to changing $(DEPDIR) to its actual value in the ++ # expansion. ++ for file in `sed -n " ++ s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ ++ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do ++ # Make sure the directory exists. ++ test -f "$dirpart/$file" && continue ++ fdir=`$as_dirname -- "$file" || ++$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ ++ X"$file" : 'X\(//\)[^/]' \| \ ++ X"$file" : 'X\(//\)$' \| \ ++ X"$file" : 'X\(/\)' \| . 2>/dev/null || ++$as_echo X"$file" | ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)[^/].*/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` ++ as_dir=$dirpart/$fdir; as_fn_mkdir_p ++ # echo "creating $dirpart/$file" ++ echo '# dummy' > "$dirpart/$file" ++ done ++ done ++} ++ ;; ++ ++ esac ++done # for ac_tag ++ ++ ++as_fn_exit 0 ++_ACEOF ++ac_clean_files=$ac_clean_files_save ++ ++test $ac_write_fail = 0 || ++ as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5 ++ ++ ++# configure is writing to config.log, and then calls config.status. ++# config.status does its own redirection, appending to config.log. ++# Unfortunately, on DOS this fails, as config.log is still kept open ++# by configure, so config.status won't be able to write to it; its ++# output is simply discarded. So we exec the FD to /dev/null, ++# effectively closing config.log, so it can be properly (re)opened and ++# appended to by config.status. When coming back to configure, we ++# need to make the FD available again. ++if test "$no_create" != yes; then ++ ac_cs_success=: ++ ac_config_status_args= ++ test "$silent" = yes && ++ ac_config_status_args="$ac_config_status_args --quiet" ++ exec 5>/dev/null ++ $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false ++ exec 5>>config.log ++ # Use ||, not &&, to avoid exiting from the if with $? = 1, which ++ # would make configure fail if this is the last instruction. ++ $ac_cs_success || as_fn_exit 1 ++fi ++if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 ++$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;} ++fi ++ ++ +diff -Nur -x '*.orig' -x '*~' fcoe-utils-1.0.9//autom4te.cache/output.1 fcoe-utils-1.0.9.new//autom4te.cache/output.1 +--- fcoe-utils-1.0.9//autom4te.cache/output.1 1969-12-31 19:00:00.000000000 -0500 ++++ fcoe-utils-1.0.9.new//autom4te.cache/output.1 2011-09-14 11:57:05.000000000 -0400 +@@ -0,0 +1,5049 @@ ++@%:@! /bin/sh ++@%:@ Guess values for system-dependent variables and create Makefiles. ++@%:@ Generated by GNU Autoconf 2.68 for fcoe-utils 1.0.9. ++@%:@ ++@%:@ Report bugs to . ++@%:@ ++@%:@ ++@%:@ Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, ++@%:@ 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software ++@%:@ Foundation, Inc. ++@%:@ ++@%:@ ++@%:@ This configure script is free software; the Free Software Foundation ++@%:@ gives unlimited permission to copy, distribute and modify it. ++## -------------------- ## ++## M4sh Initialization. ## ++## -------------------- ## ++ ++# Be more Bourne compatible ++DUALCASE=1; export DUALCASE # for MKS sh ++if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : ++ emulate sh ++ NULLCMD=: ++ # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which ++ # is contrary to our usage. Disable this feature. ++ alias -g '${1+"$@"}'='"$@"' ++ setopt NO_GLOB_SUBST ++else ++ case `(set -o) 2>/dev/null` in @%:@( ++ *posix*) : ++ set -o posix ;; @%:@( ++ *) : ++ ;; ++esac ++fi ++ ++ ++as_nl=' ++' ++export as_nl ++# Printing a long string crashes Solaris 7 /usr/bin/printf. ++as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' ++as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo ++as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo ++# Prefer a ksh shell builtin over an external printf program on Solaris, ++# but without wasting forks for bash or zsh. ++if test -z "$BASH_VERSION$ZSH_VERSION" \ ++ && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then ++ as_echo='print -r --' ++ as_echo_n='print -rn --' ++elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then ++ as_echo='printf %s\n' ++ as_echo_n='printf %s' ++else ++ if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then ++ as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' ++ as_echo_n='/usr/ucb/echo -n' ++ else ++ as_echo_body='eval expr "X$1" : "X\\(.*\\)"' ++ as_echo_n_body='eval ++ arg=$1; ++ case $arg in @%:@( ++ *"$as_nl"*) ++ expr "X$arg" : "X\\(.*\\)$as_nl"; ++ arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; ++ esac; ++ expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" ++ ' ++ export as_echo_n_body ++ as_echo_n='sh -c $as_echo_n_body as_echo' ++ fi ++ export as_echo_body ++ as_echo='sh -c $as_echo_body as_echo' ++fi ++ ++# The user is always right. ++if test "${PATH_SEPARATOR+set}" != set; then ++ PATH_SEPARATOR=: ++ (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { ++ (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || ++ PATH_SEPARATOR=';' ++ } ++fi ++ ++ ++# IFS ++# We need space, tab and new line, in precisely that order. Quoting is ++# there to prevent editors from complaining about space-tab. ++# (If _AS_PATH_WALK were called with IFS unset, it would disable word ++# splitting by setting IFS to empty value.) ++IFS=" "" $as_nl" ++ ++# Find who we are. Look in the path if we contain no directory separator. ++as_myself= ++case $0 in @%:@(( ++ *[\\/]* ) as_myself=$0 ;; ++ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break ++ done ++IFS=$as_save_IFS ++ ++ ;; ++esac ++# We did not find ourselves, most probably we were run as `sh COMMAND' ++# in which case we are not to be found in the path. ++if test "x$as_myself" = x; then ++ as_myself=$0 ++fi ++if test ! -f "$as_myself"; then ++ $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 ++ exit 1 ++fi ++ ++# Unset variables that we do not need and which cause bugs (e.g. in ++# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" ++# suppresses any "Segmentation fault" message there. '((' could ++# trigger a bug in pdksh 5.2.14. ++for as_var in BASH_ENV ENV MAIL MAILPATH ++do eval test x\${$as_var+set} = xset \ ++ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : ++done ++PS1='$ ' ++PS2='> ' ++PS4='+ ' ++ ++# NLS nuisances. ++LC_ALL=C ++export LC_ALL ++LANGUAGE=C ++export LANGUAGE ++ ++# CDPATH. ++(unset CDPATH) >/dev/null 2>&1 && unset CDPATH ++ ++if test "x$CONFIG_SHELL" = x; then ++ as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then : ++ emulate sh ++ NULLCMD=: ++ # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which ++ # is contrary to our usage. Disable this feature. ++ alias -g '\${1+\"\$@\"}'='\"\$@\"' ++ setopt NO_GLOB_SUBST ++else ++ case \`(set -o) 2>/dev/null\` in @%:@( ++ *posix*) : ++ set -o posix ;; @%:@( ++ *) : ++ ;; ++esac ++fi ++" ++ as_required="as_fn_return () { (exit \$1); } ++as_fn_success () { as_fn_return 0; } ++as_fn_failure () { as_fn_return 1; } ++as_fn_ret_success () { return 0; } ++as_fn_ret_failure () { return 1; } ++ ++exitcode=0 ++as_fn_success || { exitcode=1; echo as_fn_success failed.; } ++as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; } ++as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; } ++as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; } ++if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then : ++ ++else ++ exitcode=1; echo positional parameters were not saved. ++fi ++test x\$exitcode = x0 || exit 1" ++ as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO ++ as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO ++ eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" && ++ test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1" ++ if (eval "$as_required") 2>/dev/null; then : ++ as_have_required=yes ++else ++ as_have_required=no ++fi ++ if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then : ++ ++else ++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++as_found=false ++for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ as_found=: ++ case $as_dir in @%:@( ++ /*) ++ for as_base in sh bash ksh sh5; do ++ # Try only shells that exist, to save several forks. ++ as_shell=$as_dir/$as_base ++ if { test -f "$as_shell" || test -f "$as_shell.exe"; } && ++ { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then : ++ CONFIG_SHELL=$as_shell as_have_required=yes ++ if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then : ++ break 2 ++fi ++fi ++ done;; ++ esac ++ as_found=false ++done ++$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } && ++ { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then : ++ CONFIG_SHELL=$SHELL as_have_required=yes ++fi; } ++IFS=$as_save_IFS ++ ++ ++ if test "x$CONFIG_SHELL" != x; then : ++ # We cannot yet assume a decent shell, so we have to provide a ++ # neutralization value for shells without unset; and this also ++ # works around shells that cannot unset nonexistent variables. ++ # Preserve -v and -x to the replacement shell. ++ BASH_ENV=/dev/null ++ ENV=/dev/null ++ (unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV ++ export CONFIG_SHELL ++ case $- in @%:@ (((( ++ *v*x* | *x*v* ) as_opts=-vx ;; ++ *v* ) as_opts=-v ;; ++ *x* ) as_opts=-x ;; ++ * ) as_opts= ;; ++ esac ++ exec "$CONFIG_SHELL" $as_opts "$as_myself" ${1+"$@"} ++fi ++ ++ if test x$as_have_required = xno; then : ++ $as_echo "$0: This script requires a shell more modern than all" ++ $as_echo "$0: the shells that I found on your system." ++ if test x${ZSH_VERSION+set} = xset ; then ++ $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should" ++ $as_echo "$0: be upgraded to zsh 4.3.4 or later." ++ else ++ $as_echo "$0: Please tell bug-autoconf@gnu.org and ++$0: devel@open-fcoe.org about your system, including any ++$0: error possibly output before this message. Then install ++$0: a modern shell, or manually run the script under such a ++$0: shell if you do have one." ++ fi ++ exit 1 ++fi ++fi ++fi ++SHELL=${CONFIG_SHELL-/bin/sh} ++export SHELL ++# Unset more variables known to interfere with behavior of common tools. ++CLICOLOR_FORCE= GREP_OPTIONS= ++unset CLICOLOR_FORCE GREP_OPTIONS ++ ++## --------------------- ## ++## M4sh Shell Functions. ## ++## --------------------- ## ++@%:@ as_fn_unset VAR ++@%:@ --------------- ++@%:@ Portably unset VAR. ++as_fn_unset () ++{ ++ { eval $1=; unset $1;} ++} ++as_unset=as_fn_unset ++ ++@%:@ as_fn_set_status STATUS ++@%:@ ----------------------- ++@%:@ Set @S|@? to STATUS, without forking. ++as_fn_set_status () ++{ ++ return $1 ++} @%:@ as_fn_set_status ++ ++@%:@ as_fn_exit STATUS ++@%:@ ----------------- ++@%:@ Exit the shell with STATUS, even in a "trap 0" or "set -e" context. ++as_fn_exit () ++{ ++ set +e ++ as_fn_set_status $1 ++ exit $1 ++} @%:@ as_fn_exit ++ ++@%:@ as_fn_mkdir_p ++@%:@ ------------- ++@%:@ Create "@S|@as_dir" as a directory, including parents if necessary. ++as_fn_mkdir_p () ++{ ++ ++ case $as_dir in #( ++ -*) as_dir=./$as_dir;; ++ esac ++ test -d "$as_dir" || eval $as_mkdir_p || { ++ as_dirs= ++ while :; do ++ case $as_dir in #( ++ *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( ++ *) as_qdir=$as_dir;; ++ esac ++ as_dirs="'$as_qdir' $as_dirs" ++ as_dir=`$as_dirname -- "$as_dir" || ++$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ ++ X"$as_dir" : 'X\(//\)[^/]' \| \ ++ X"$as_dir" : 'X\(//\)$' \| \ ++ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || ++$as_echo X"$as_dir" | ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)[^/].*/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` ++ test -d "$as_dir" && break ++ done ++ test -z "$as_dirs" || eval "mkdir $as_dirs" ++ } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" ++ ++ ++} @%:@ as_fn_mkdir_p ++@%:@ as_fn_append VAR VALUE ++@%:@ ---------------------- ++@%:@ Append the text in VALUE to the end of the definition contained in VAR. Take ++@%:@ advantage of any shell optimizations that allow amortized linear growth over ++@%:@ repeated appends, instead of the typical quadratic growth present in naive ++@%:@ implementations. ++if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : ++ eval 'as_fn_append () ++ { ++ eval $1+=\$2 ++ }' ++else ++ as_fn_append () ++ { ++ eval $1=\$$1\$2 ++ } ++fi # as_fn_append ++ ++@%:@ as_fn_arith ARG... ++@%:@ ------------------ ++@%:@ Perform arithmetic evaluation on the ARGs, and store the result in the ++@%:@ global @S|@as_val. Take advantage of shells that can avoid forks. The arguments ++@%:@ must be portable across @S|@(()) and expr. ++if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : ++ eval 'as_fn_arith () ++ { ++ as_val=$(( $* )) ++ }' ++else ++ as_fn_arith () ++ { ++ as_val=`expr "$@" || test $? -eq 1` ++ } ++fi # as_fn_arith ++ ++ ++@%:@ as_fn_error STATUS ERROR [LINENO LOG_FD] ++@%:@ ---------------------------------------- ++@%:@ Output "`basename @S|@0`: error: ERROR" to stderr. If LINENO and LOG_FD are ++@%:@ provided, also output the error to LOG_FD, referencing LINENO. Then exit the ++@%:@ script with STATUS, using 1 if that was 0. ++as_fn_error () ++{ ++ as_status=$1; test $as_status -eq 0 && as_status=1 ++ if test "$4"; then ++ as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack ++ $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 ++ fi ++ $as_echo "$as_me: error: $2" >&2 ++ as_fn_exit $as_status ++} @%:@ as_fn_error ++ ++if expr a : '\(a\)' >/dev/null 2>&1 && ++ test "X`expr 00001 : '.*\(...\)'`" = X001; then ++ as_expr=expr ++else ++ as_expr=false ++fi ++ ++if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then ++ as_basename=basename ++else ++ as_basename=false ++fi ++ ++if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then ++ as_dirname=dirname ++else ++ as_dirname=false ++fi ++ ++as_me=`$as_basename -- "$0" || ++$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ ++ X"$0" : 'X\(//\)$' \| \ ++ X"$0" : 'X\(/\)' \| . 2>/dev/null || ++$as_echo X/"$0" | ++ sed '/^.*\/\([^/][^/]*\)\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\/\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\/\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` ++ ++# Avoid depending upon Character Ranges. ++as_cr_letters='abcdefghijklmnopqrstuvwxyz' ++as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' ++as_cr_Letters=$as_cr_letters$as_cr_LETTERS ++as_cr_digits='0123456789' ++as_cr_alnum=$as_cr_Letters$as_cr_digits ++ ++ ++ as_lineno_1=$LINENO as_lineno_1a=$LINENO ++ as_lineno_2=$LINENO as_lineno_2a=$LINENO ++ eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" && ++ test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || { ++ # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-) ++ sed -n ' ++ p ++ /[$]LINENO/= ++ ' <$as_myself | ++ sed ' ++ s/[$]LINENO.*/&-/ ++ t lineno ++ b ++ :lineno ++ N ++ :loop ++ s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ ++ t loop ++ s/-\n.*// ++ ' >$as_me.lineno && ++ chmod +x "$as_me.lineno" || ++ { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; } ++ ++ # Don't try to exec as it changes $[0], causing all sort of problems ++ # (the dirname of $[0] is not the place where we might find the ++ # original and so on. Autoconf is especially sensitive to this). ++ . "./$as_me.lineno" ++ # Exit status is that of the last command. ++ exit ++} ++ ++ECHO_C= ECHO_N= ECHO_T= ++case `echo -n x` in @%:@((((( ++-n*) ++ case `echo 'xy\c'` in ++ *c*) ECHO_T=' ';; # ECHO_T is single tab character. ++ xy) ECHO_C='\c';; ++ *) echo `echo ksh88 bug on AIX 6.1` > /dev/null ++ ECHO_T=' ';; ++ esac;; ++*) ++ ECHO_N='-n';; ++esac ++ ++rm -f conf$$ conf$$.exe conf$$.file ++if test -d conf$$.dir; then ++ rm -f conf$$.dir/conf$$.file ++else ++ rm -f conf$$.dir ++ mkdir conf$$.dir 2>/dev/null ++fi ++if (echo >conf$$.file) 2>/dev/null; then ++ if ln -s conf$$.file conf$$ 2>/dev/null; then ++ as_ln_s='ln -s' ++ # ... but there are two gotchas: ++ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. ++ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. ++ # In both cases, we have to default to `cp -p'. ++ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || ++ as_ln_s='cp -p' ++ elif ln conf$$.file conf$$ 2>/dev/null; then ++ as_ln_s=ln ++ else ++ as_ln_s='cp -p' ++ fi ++else ++ as_ln_s='cp -p' ++fi ++rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file ++rmdir conf$$.dir 2>/dev/null ++ ++if mkdir -p . 2>/dev/null; then ++ as_mkdir_p='mkdir -p "$as_dir"' ++else ++ test -d ./-p && rmdir ./-p ++ as_mkdir_p=false ++fi ++ ++if test -x / >/dev/null 2>&1; then ++ as_test_x='test -x' ++else ++ if ls -dL / >/dev/null 2>&1; then ++ as_ls_L_option=L ++ else ++ as_ls_L_option= ++ fi ++ as_test_x=' ++ eval sh -c '\'' ++ if test -d "$1"; then ++ test -d "$1/."; ++ else ++ case $1 in @%:@( ++ -*)set "./$1";; ++ esac; ++ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in @%:@(( ++ ???[sx]*):;;*)false;;esac;fi ++ '\'' sh ++ ' ++fi ++as_executable_p=$as_test_x ++ ++# Sed expression to map a string onto a valid CPP name. ++as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" ++ ++# Sed expression to map a string onto a valid variable name. ++as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" ++ ++ ++test -n "$DJDIR" || exec 7<&0 &1 ++ ++# Name of the host. ++# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status, ++# so uname gets run too. ++ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` ++ ++# ++# Initializations. ++# ++ac_default_prefix=/usr/local ++ac_clean_files= ++ac_config_libobj_dir=. ++LIB@&t@OBJS= ++cross_compiling=no ++subdirs= ++MFLAGS= ++MAKEFLAGS= ++ ++# Identity of this package. ++PACKAGE_NAME='fcoe-utils' ++PACKAGE_TARNAME='fcoe-utils' ++PACKAGE_VERSION='1.0.9' ++PACKAGE_STRING='fcoe-utils 1.0.9' ++PACKAGE_BUGREPORT='devel@open-fcoe.org' ++PACKAGE_URL='' ++ ++ac_subst_vars='am__EXEEXT_FALSE ++am__EXEEXT_TRUE ++LTLIBOBJS ++LIB@&t@OBJS ++DCBD_LIBS ++DCBD_CFLAGS ++WITH_DCB_FALSE ++WITH_DCB_TRUE ++HBAAPI_LIBS ++HBAAPI_CFLAGS ++PKG_CONFIG_LIBDIR ++PKG_CONFIG_PATH ++PKG_CONFIG ++am__fastdepCC_FALSE ++am__fastdepCC_TRUE ++CCDEPMODE ++AMDEPBACKSLASH ++AMDEP_FALSE ++AMDEP_TRUE ++am__quote ++am__include ++DEPDIR ++OBJEXT ++EXEEXT ++ac_ct_CC ++CPPFLAGS ++LDFLAGS ++CFLAGS ++CC ++am__untar ++am__tar ++AMTAR ++am__leading_dot ++SET_MAKE ++AWK ++mkdir_p ++MKDIR_P ++INSTALL_STRIP_PROGRAM ++STRIP ++install_sh ++MAKEINFO ++AUTOHEADER ++AUTOMAKE ++AUTOCONF ++ACLOCAL ++VERSION ++PACKAGE ++CYGPATH_W ++am__isrc ++INSTALL_DATA ++INSTALL_SCRIPT ++INSTALL_PROGRAM ++target_alias ++host_alias ++build_alias ++LIBS ++ECHO_T ++ECHO_N ++ECHO_C ++DEFS ++mandir ++localedir ++libdir ++psdir ++pdfdir ++dvidir ++htmldir ++infodir ++docdir ++oldincludedir ++includedir ++localstatedir ++sharedstatedir ++sysconfdir ++datadir ++datarootdir ++libexecdir ++sbindir ++bindir ++program_transform_name ++prefix ++exec_prefix ++PACKAGE_URL ++PACKAGE_BUGREPORT ++PACKAGE_STRING ++PACKAGE_VERSION ++PACKAGE_TARNAME ++PACKAGE_NAME ++PATH_SEPARATOR ++SHELL' ++ac_subst_files='' ++ac_user_opts=' ++enable_option_checking ++enable_dependency_tracking ++with_dcb ++' ++ ac_precious_vars='build_alias ++host_alias ++target_alias ++CC ++CFLAGS ++LDFLAGS ++LIBS ++CPPFLAGS ++PKG_CONFIG ++PKG_CONFIG_PATH ++PKG_CONFIG_LIBDIR ++HBAAPI_CFLAGS ++HBAAPI_LIBS ++DCBD_CFLAGS ++DCBD_LIBS' ++ ++ ++# Initialize some variables set by options. ++ac_init_help= ++ac_init_version=false ++ac_unrecognized_opts= ++ac_unrecognized_sep= ++# The variables have the same names as the options, with ++# dashes changed to underlines. ++cache_file=/dev/null ++exec_prefix=NONE ++no_create= ++no_recursion= ++prefix=NONE ++program_prefix=NONE ++program_suffix=NONE ++program_transform_name=s,x,x, ++silent= ++site= ++srcdir= ++verbose= ++x_includes=NONE ++x_libraries=NONE ++ ++# Installation directory options. ++# These are left unexpanded so users can "make install exec_prefix=/foo" ++# and all the variables that are supposed to be based on exec_prefix ++# by default will actually change. ++# Use braces instead of parens because sh, perl, etc. also accept them. ++# (The list follows the same order as the GNU Coding Standards.) ++bindir='${exec_prefix}/bin' ++sbindir='${exec_prefix}/sbin' ++libexecdir='${exec_prefix}/libexec' ++datarootdir='${prefix}/share' ++datadir='${datarootdir}' ++sysconfdir='${prefix}/etc' ++sharedstatedir='${prefix}/com' ++localstatedir='${prefix}/var' ++includedir='${prefix}/include' ++oldincludedir='/usr/include' ++docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' ++infodir='${datarootdir}/info' ++htmldir='${docdir}' ++dvidir='${docdir}' ++pdfdir='${docdir}' ++psdir='${docdir}' ++libdir='${exec_prefix}/lib' ++localedir='${datarootdir}/locale' ++mandir='${datarootdir}/man' ++ ++ac_prev= ++ac_dashdash= ++for ac_option ++do ++ # If the previous option needs an argument, assign it. ++ if test -n "$ac_prev"; then ++ eval $ac_prev=\$ac_option ++ ac_prev= ++ continue ++ fi ++ ++ case $ac_option in ++ *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; ++ *=) ac_optarg= ;; ++ *) ac_optarg=yes ;; ++ esac ++ ++ # Accept the important Cygnus configure options, so we can diagnose typos. ++ ++ case $ac_dashdash$ac_option in ++ --) ++ ac_dashdash=yes ;; ++ ++ -bindir | --bindir | --bindi | --bind | --bin | --bi) ++ ac_prev=bindir ;; ++ -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) ++ bindir=$ac_optarg ;; ++ ++ -build | --build | --buil | --bui | --bu) ++ ac_prev=build_alias ;; ++ -build=* | --build=* | --buil=* | --bui=* | --bu=*) ++ build_alias=$ac_optarg ;; ++ ++ -cache-file | --cache-file | --cache-fil | --cache-fi \ ++ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) ++ ac_prev=cache_file ;; ++ -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ ++ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) ++ cache_file=$ac_optarg ;; ++ ++ --config-cache | -C) ++ cache_file=config.cache ;; ++ ++ -datadir | --datadir | --datadi | --datad) ++ ac_prev=datadir ;; ++ -datadir=* | --datadir=* | --datadi=* | --datad=*) ++ datadir=$ac_optarg ;; ++ ++ -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ ++ | --dataroo | --dataro | --datar) ++ ac_prev=datarootdir ;; ++ -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ ++ | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) ++ datarootdir=$ac_optarg ;; ++ ++ -disable-* | --disable-*) ++ ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` ++ # Reject names that are not valid shell variable names. ++ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && ++ as_fn_error $? "invalid feature name: $ac_useropt" ++ ac_useropt_orig=$ac_useropt ++ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` ++ case $ac_user_opts in ++ *" ++"enable_$ac_useropt" ++"*) ;; ++ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig" ++ ac_unrecognized_sep=', ';; ++ esac ++ eval enable_$ac_useropt=no ;; ++ ++ -docdir | --docdir | --docdi | --doc | --do) ++ ac_prev=docdir ;; ++ -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) ++ docdir=$ac_optarg ;; ++ ++ -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) ++ ac_prev=dvidir ;; ++ -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) ++ dvidir=$ac_optarg ;; ++ ++ -enable-* | --enable-*) ++ ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` ++ # Reject names that are not valid shell variable names. ++ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && ++ as_fn_error $? "invalid feature name: $ac_useropt" ++ ac_useropt_orig=$ac_useropt ++ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` ++ case $ac_user_opts in ++ *" ++"enable_$ac_useropt" ++"*) ;; ++ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig" ++ ac_unrecognized_sep=', ';; ++ esac ++ eval enable_$ac_useropt=\$ac_optarg ;; ++ ++ -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ ++ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ ++ | --exec | --exe | --ex) ++ ac_prev=exec_prefix ;; ++ -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ ++ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ ++ | --exec=* | --exe=* | --ex=*) ++ exec_prefix=$ac_optarg ;; ++ ++ -gas | --gas | --ga | --g) ++ # Obsolete; use --with-gas. ++ with_gas=yes ;; ++ ++ -help | --help | --hel | --he | -h) ++ ac_init_help=long ;; ++ -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) ++ ac_init_help=recursive ;; ++ -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) ++ ac_init_help=short ;; ++ ++ -host | --host | --hos | --ho) ++ ac_prev=host_alias ;; ++ -host=* | --host=* | --hos=* | --ho=*) ++ host_alias=$ac_optarg ;; ++ ++ -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) ++ ac_prev=htmldir ;; ++ -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ ++ | --ht=*) ++ htmldir=$ac_optarg ;; ++ ++ -includedir | --includedir | --includedi | --included | --include \ ++ | --includ | --inclu | --incl | --inc) ++ ac_prev=includedir ;; ++ -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ ++ | --includ=* | --inclu=* | --incl=* | --inc=*) ++ includedir=$ac_optarg ;; ++ ++ -infodir | --infodir | --infodi | --infod | --info | --inf) ++ ac_prev=infodir ;; ++ -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) ++ infodir=$ac_optarg ;; ++ ++ -libdir | --libdir | --libdi | --libd) ++ ac_prev=libdir ;; ++ -libdir=* | --libdir=* | --libdi=* | --libd=*) ++ libdir=$ac_optarg ;; ++ ++ -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ ++ | --libexe | --libex | --libe) ++ ac_prev=libexecdir ;; ++ -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ ++ | --libexe=* | --libex=* | --libe=*) ++ libexecdir=$ac_optarg ;; ++ ++ -localedir | --localedir | --localedi | --localed | --locale) ++ ac_prev=localedir ;; ++ -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) ++ localedir=$ac_optarg ;; ++ ++ -localstatedir | --localstatedir | --localstatedi | --localstated \ ++ | --localstate | --localstat | --localsta | --localst | --locals) ++ ac_prev=localstatedir ;; ++ -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ ++ | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) ++ localstatedir=$ac_optarg ;; ++ ++ -mandir | --mandir | --mandi | --mand | --man | --ma | --m) ++ ac_prev=mandir ;; ++ -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) ++ mandir=$ac_optarg ;; ++ ++ -nfp | --nfp | --nf) ++ # Obsolete; use --without-fp. ++ with_fp=no ;; ++ ++ -no-create | --no-create | --no-creat | --no-crea | --no-cre \ ++ | --no-cr | --no-c | -n) ++ no_create=yes ;; ++ ++ -no-recursion | --no-recursion | --no-recursio | --no-recursi \ ++ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ++ no_recursion=yes ;; ++ ++ -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ ++ | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ ++ | --oldin | --oldi | --old | --ol | --o) ++ ac_prev=oldincludedir ;; ++ -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ ++ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ ++ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) ++ oldincludedir=$ac_optarg ;; ++ ++ -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) ++ ac_prev=prefix ;; ++ -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) ++ prefix=$ac_optarg ;; ++ ++ -program-prefix | --program-prefix | --program-prefi | --program-pref \ ++ | --program-pre | --program-pr | --program-p) ++ ac_prev=program_prefix ;; ++ -program-prefix=* | --program-prefix=* | --program-prefi=* \ ++ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) ++ program_prefix=$ac_optarg ;; ++ ++ -program-suffix | --program-suffix | --program-suffi | --program-suff \ ++ | --program-suf | --program-su | --program-s) ++ ac_prev=program_suffix ;; ++ -program-suffix=* | --program-suffix=* | --program-suffi=* \ ++ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) ++ program_suffix=$ac_optarg ;; ++ ++ -program-transform-name | --program-transform-name \ ++ | --program-transform-nam | --program-transform-na \ ++ | --program-transform-n | --program-transform- \ ++ | --program-transform | --program-transfor \ ++ | --program-transfo | --program-transf \ ++ | --program-trans | --program-tran \ ++ | --progr-tra | --program-tr | --program-t) ++ ac_prev=program_transform_name ;; ++ -program-transform-name=* | --program-transform-name=* \ ++ | --program-transform-nam=* | --program-transform-na=* \ ++ | --program-transform-n=* | --program-transform-=* \ ++ | --program-transform=* | --program-transfor=* \ ++ | --program-transfo=* | --program-transf=* \ ++ | --program-trans=* | --program-tran=* \ ++ | --progr-tra=* | --program-tr=* | --program-t=*) ++ program_transform_name=$ac_optarg ;; ++ ++ -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) ++ ac_prev=pdfdir ;; ++ -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) ++ pdfdir=$ac_optarg ;; ++ ++ -psdir | --psdir | --psdi | --psd | --ps) ++ ac_prev=psdir ;; ++ -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) ++ psdir=$ac_optarg ;; ++ ++ -q | -quiet | --quiet | --quie | --qui | --qu | --q \ ++ | -silent | --silent | --silen | --sile | --sil) ++ silent=yes ;; ++ ++ -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) ++ ac_prev=sbindir ;; ++ -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ ++ | --sbi=* | --sb=*) ++ sbindir=$ac_optarg ;; ++ ++ -sharedstatedir | --sharedstatedir | --sharedstatedi \ ++ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ ++ | --sharedst | --shareds | --shared | --share | --shar \ ++ | --sha | --sh) ++ ac_prev=sharedstatedir ;; ++ -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ ++ | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ ++ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ ++ | --sha=* | --sh=*) ++ sharedstatedir=$ac_optarg ;; ++ ++ -site | --site | --sit) ++ ac_prev=site ;; ++ -site=* | --site=* | --sit=*) ++ site=$ac_optarg ;; ++ ++ -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) ++ ac_prev=srcdir ;; ++ -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) ++ srcdir=$ac_optarg ;; ++ ++ -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ ++ | --syscon | --sysco | --sysc | --sys | --sy) ++ ac_prev=sysconfdir ;; ++ -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ ++ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) ++ sysconfdir=$ac_optarg ;; ++ ++ -target | --target | --targe | --targ | --tar | --ta | --t) ++ ac_prev=target_alias ;; ++ -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) ++ target_alias=$ac_optarg ;; ++ ++ -v | -verbose | --verbose | --verbos | --verbo | --verb) ++ verbose=yes ;; ++ ++ -version | --version | --versio | --versi | --vers | -V) ++ ac_init_version=: ;; ++ ++ -with-* | --with-*) ++ ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` ++ # Reject names that are not valid shell variable names. ++ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && ++ as_fn_error $? "invalid package name: $ac_useropt" ++ ac_useropt_orig=$ac_useropt ++ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` ++ case $ac_user_opts in ++ *" ++"with_$ac_useropt" ++"*) ;; ++ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig" ++ ac_unrecognized_sep=', ';; ++ esac ++ eval with_$ac_useropt=\$ac_optarg ;; ++ ++ -without-* | --without-*) ++ ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` ++ # Reject names that are not valid shell variable names. ++ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && ++ as_fn_error $? "invalid package name: $ac_useropt" ++ ac_useropt_orig=$ac_useropt ++ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` ++ case $ac_user_opts in ++ *" ++"with_$ac_useropt" ++"*) ;; ++ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig" ++ ac_unrecognized_sep=', ';; ++ esac ++ eval with_$ac_useropt=no ;; ++ ++ --x) ++ # Obsolete; use --with-x. ++ with_x=yes ;; ++ ++ -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ ++ | --x-incl | --x-inc | --x-in | --x-i) ++ ac_prev=x_includes ;; ++ -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ ++ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) ++ x_includes=$ac_optarg ;; ++ ++ -x-libraries | --x-libraries | --x-librarie | --x-librari \ ++ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) ++ ac_prev=x_libraries ;; ++ -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ ++ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) ++ x_libraries=$ac_optarg ;; ++ ++ -*) as_fn_error $? "unrecognized option: \`$ac_option' ++Try \`$0 --help' for more information" ++ ;; ++ ++ *=*) ++ ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` ++ # Reject names that are not valid shell variable names. ++ case $ac_envvar in #( ++ '' | [0-9]* | *[!_$as_cr_alnum]* ) ++ as_fn_error $? "invalid variable name: \`$ac_envvar'" ;; ++ esac ++ eval $ac_envvar=\$ac_optarg ++ export $ac_envvar ;; ++ ++ *) ++ # FIXME: should be removed in autoconf 3.0. ++ $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2 ++ expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && ++ $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2 ++ : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}" ++ ;; ++ ++ esac ++done ++ ++if test -n "$ac_prev"; then ++ ac_option=--`echo $ac_prev | sed 's/_/-/g'` ++ as_fn_error $? "missing argument to $ac_option" ++fi ++ ++if test -n "$ac_unrecognized_opts"; then ++ case $enable_option_checking in ++ no) ;; ++ fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;; ++ *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;; ++ esac ++fi ++ ++# Check all directory arguments for consistency. ++for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ ++ datadir sysconfdir sharedstatedir localstatedir includedir \ ++ oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ ++ libdir localedir mandir ++do ++ eval ac_val=\$$ac_var ++ # Remove trailing slashes. ++ case $ac_val in ++ */ ) ++ ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'` ++ eval $ac_var=\$ac_val;; ++ esac ++ # Be sure to have absolute directory names. ++ case $ac_val in ++ [\\/$]* | ?:[\\/]* ) continue;; ++ NONE | '' ) case $ac_var in *prefix ) continue;; esac;; ++ esac ++ as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val" ++done ++ ++# There might be people who depend on the old broken behavior: `$host' ++# used to hold the argument of --host etc. ++# FIXME: To remove some day. ++build=$build_alias ++host=$host_alias ++target=$target_alias ++ ++# FIXME: To remove some day. ++if test "x$host_alias" != x; then ++ if test "x$build_alias" = x; then ++ cross_compiling=maybe ++ $as_echo "$as_me: WARNING: if you wanted to set the --build type, don't use --host. ++ If a cross compiler is detected then cross compile mode will be used" >&2 ++ elif test "x$build_alias" != "x$host_alias"; then ++ cross_compiling=yes ++ fi ++fi ++ ++ac_tool_prefix= ++test -n "$host_alias" && ac_tool_prefix=$host_alias- ++ ++test "$silent" = yes && exec 6>/dev/null ++ ++ ++ac_pwd=`pwd` && test -n "$ac_pwd" && ++ac_ls_di=`ls -di .` && ++ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || ++ as_fn_error $? "working directory cannot be determined" ++test "X$ac_ls_di" = "X$ac_pwd_ls_di" || ++ as_fn_error $? "pwd does not report name of working directory" ++ ++ ++# Find the source files, if location was not specified. ++if test -z "$srcdir"; then ++ ac_srcdir_defaulted=yes ++ # Try the directory containing this script, then the parent directory. ++ ac_confdir=`$as_dirname -- "$as_myself" || ++$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ ++ X"$as_myself" : 'X\(//\)[^/]' \| \ ++ X"$as_myself" : 'X\(//\)$' \| \ ++ X"$as_myself" : 'X\(/\)' \| . 2>/dev/null || ++$as_echo X"$as_myself" | ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)[^/].*/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` ++ srcdir=$ac_confdir ++ if test ! -r "$srcdir/$ac_unique_file"; then ++ srcdir=.. ++ fi ++else ++ ac_srcdir_defaulted=no ++fi ++if test ! -r "$srcdir/$ac_unique_file"; then ++ test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." ++ as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir" ++fi ++ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" ++ac_abs_confdir=`( ++ cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg" ++ pwd)` ++# When building in place, set srcdir=. ++if test "$ac_abs_confdir" = "$ac_pwd"; then ++ srcdir=. ++fi ++# Remove unnecessary trailing slashes from srcdir. ++# Double slashes in file names in object file debugging info ++# mess up M-x gdb in Emacs. ++case $srcdir in ++*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; ++esac ++for ac_var in $ac_precious_vars; do ++ eval ac_env_${ac_var}_set=\${${ac_var}+set} ++ eval ac_env_${ac_var}_value=\$${ac_var} ++ eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} ++ eval ac_cv_env_${ac_var}_value=\$${ac_var} ++done ++ ++# ++# Report the --help message. ++# ++if test "$ac_init_help" = "long"; then ++ # Omit some internal or obsolete options to make the list less imposing. ++ # This message is too long to be a string in the A/UX 3.1 sh. ++ cat <<_ACEOF ++\`configure' configures fcoe-utils 1.0.9 to adapt to many kinds of systems. ++ ++Usage: $0 [OPTION]... [VAR=VALUE]... ++ ++To assign environment variables (e.g., CC, CFLAGS...), specify them as ++VAR=VALUE. See below for descriptions of some of the useful variables. ++ ++Defaults for the options are specified in brackets. ++ ++Configuration: ++ -h, --help display this help and exit ++ --help=short display options specific to this package ++ --help=recursive display the short help of all the included packages ++ -V, --version display version information and exit ++ -q, --quiet, --silent do not print \`checking ...' messages ++ --cache-file=FILE cache test results in FILE [disabled] ++ -C, --config-cache alias for \`--cache-file=config.cache' ++ -n, --no-create do not create output files ++ --srcdir=DIR find the sources in DIR [configure dir or \`..'] ++ ++Installation directories: ++ --prefix=PREFIX install architecture-independent files in PREFIX ++ @<:@@S|@ac_default_prefix@:>@ ++ --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX ++ @<:@PREFIX@:>@ ++ ++By default, \`make install' will install all the files in ++\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify ++an installation prefix other than \`$ac_default_prefix' using \`--prefix', ++for instance \`--prefix=\$HOME'. ++ ++For better control, use the options below. ++ ++Fine tuning of the installation directories: ++ --bindir=DIR user executables [EPREFIX/bin] ++ --sbindir=DIR system admin executables [EPREFIX/sbin] ++ --libexecdir=DIR program executables [EPREFIX/libexec] ++ --sysconfdir=DIR read-only single-machine data [PREFIX/etc] ++ --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] ++ --localstatedir=DIR modifiable single-machine data [PREFIX/var] ++ --libdir=DIR object code libraries [EPREFIX/lib] ++ --includedir=DIR C header files [PREFIX/include] ++ --oldincludedir=DIR C header files for non-gcc [/usr/include] ++ --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] ++ --datadir=DIR read-only architecture-independent data [DATAROOTDIR] ++ --infodir=DIR info documentation [DATAROOTDIR/info] ++ --localedir=DIR locale-dependent data [DATAROOTDIR/locale] ++ --mandir=DIR man documentation [DATAROOTDIR/man] ++ --docdir=DIR documentation root @<:@DATAROOTDIR/doc/fcoe-utils@:>@ ++ --htmldir=DIR html documentation [DOCDIR] ++ --dvidir=DIR dvi documentation [DOCDIR] ++ --pdfdir=DIR pdf documentation [DOCDIR] ++ --psdir=DIR ps documentation [DOCDIR] ++_ACEOF ++ ++ cat <<\_ACEOF ++ ++Program names: ++ --program-prefix=PREFIX prepend PREFIX to installed program names ++ --program-suffix=SUFFIX append SUFFIX to installed program names ++ --program-transform-name=PROGRAM run sed PROGRAM on installed program names ++_ACEOF ++fi ++ ++if test -n "$ac_init_help"; then ++ case $ac_init_help in ++ short | recursive ) echo "Configuration of fcoe-utils 1.0.9:";; ++ esac ++ cat <<\_ACEOF ++ ++Optional Features: ++ --disable-option-checking ignore unrecognized --enable/--with options ++ --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) ++ --enable-FEATURE[=ARG] include FEATURE [ARG=yes] ++ --disable-dependency-tracking speeds up one-time build ++ --enable-dependency-tracking do not reject slow dependency extractors ++ ++Optional Packages: ++ --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] ++ --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) ++ --without-dcb disable DCB support ++ ++Some influential environment variables: ++ CC C compiler command ++ CFLAGS C compiler flags ++ LDFLAGS linker flags, e.g. -L if you have libraries in a ++ nonstandard directory ++ LIBS libraries to pass to the linker, e.g. -l ++ CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I if ++ you have headers in a nonstandard directory ++ PKG_CONFIG path to pkg-config utility ++ PKG_CONFIG_PATH ++ directories to add to pkg-config's search path ++ PKG_CONFIG_LIBDIR ++ path overriding pkg-config's built-in search path ++ HBAAPI_CFLAGS ++ C compiler flags for HBAAPI, overriding pkg-config ++ HBAAPI_LIBS linker flags for HBAAPI, overriding pkg-config ++ DCBD_CFLAGS C compiler flags for DCBD, overriding pkg-config ++ DCBD_LIBS linker flags for DCBD, overriding pkg-config ++ ++Use these variables to override the choices made by `configure' or to help ++it to find libraries and programs with nonstandard names/locations. ++ ++Report bugs to . ++_ACEOF ++ac_status=$? ++fi ++ ++if test "$ac_init_help" = "recursive"; then ++ # If there are subdirs, report their specific --help. ++ for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue ++ test -d "$ac_dir" || ++ { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } || ++ continue ++ ac_builddir=. ++ ++case "$ac_dir" in ++.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; ++*) ++ ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` ++ # A ".." for each directory in $ac_dir_suffix. ++ ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` ++ case $ac_top_builddir_sub in ++ "") ac_top_builddir_sub=. ac_top_build_prefix= ;; ++ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; ++ esac ;; ++esac ++ac_abs_top_builddir=$ac_pwd ++ac_abs_builddir=$ac_pwd$ac_dir_suffix ++# for backward compatibility: ++ac_top_builddir=$ac_top_build_prefix ++ ++case $srcdir in ++ .) # We are building in place. ++ ac_srcdir=. ++ ac_top_srcdir=$ac_top_builddir_sub ++ ac_abs_top_srcdir=$ac_pwd ;; ++ [\\/]* | ?:[\\/]* ) # Absolute name. ++ ac_srcdir=$srcdir$ac_dir_suffix; ++ ac_top_srcdir=$srcdir ++ ac_abs_top_srcdir=$srcdir ;; ++ *) # Relative name. ++ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix ++ ac_top_srcdir=$ac_top_build_prefix$srcdir ++ ac_abs_top_srcdir=$ac_pwd/$srcdir ;; ++esac ++ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix ++ ++ cd "$ac_dir" || { ac_status=$?; continue; } ++ # Check for guested configure. ++ if test -f "$ac_srcdir/configure.gnu"; then ++ echo && ++ $SHELL "$ac_srcdir/configure.gnu" --help=recursive ++ elif test -f "$ac_srcdir/configure"; then ++ echo && ++ $SHELL "$ac_srcdir/configure" --help=recursive ++ else ++ $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 ++ fi || ac_status=$? ++ cd "$ac_pwd" || { ac_status=$?; break; } ++ done ++fi ++ ++test -n "$ac_init_help" && exit $ac_status ++if $ac_init_version; then ++ cat <<\_ACEOF ++fcoe-utils configure 1.0.9 ++generated by GNU Autoconf 2.68 ++ ++Copyright (C) 2010 Free Software Foundation, Inc. ++This configure script is free software; the Free Software Foundation ++gives unlimited permission to copy, distribute and modify it. ++_ACEOF ++ exit ++fi ++ ++## ------------------------ ## ++## Autoconf initialization. ## ++## ------------------------ ## ++ ++@%:@ ac_fn_c_try_compile LINENO ++@%:@ -------------------------- ++@%:@ Try to compile conftest.@S|@ac_ext, and return whether this succeeded. ++ac_fn_c_try_compile () ++{ ++ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack ++ rm -f conftest.$ac_objext ++ if { { ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" ++$as_echo "$ac_try_echo"; } >&5 ++ (eval "$ac_compile") 2>conftest.err ++ ac_status=$? ++ if test -s conftest.err; then ++ grep -v '^ *+' conftest.err >conftest.er1 ++ cat conftest.er1 >&5 ++ mv -f conftest.er1 conftest.err ++ fi ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then : ++ ac_retval=0 ++else ++ $as_echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_retval=1 ++fi ++ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno ++ as_fn_set_status $ac_retval ++ ++} @%:@ ac_fn_c_try_compile ++cat >config.log <<_ACEOF ++This file contains any messages produced by compilers while ++running configure, to aid debugging if configure makes a mistake. ++ ++It was created by fcoe-utils $as_me 1.0.9, which was ++generated by GNU Autoconf 2.68. Invocation command line was ++ ++ $ $0 $@ ++ ++_ACEOF ++exec 5>>config.log ++{ ++cat <<_ASUNAME ++## --------- ## ++## Platform. ## ++## --------- ## ++ ++hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` ++uname -m = `(uname -m) 2>/dev/null || echo unknown` ++uname -r = `(uname -r) 2>/dev/null || echo unknown` ++uname -s = `(uname -s) 2>/dev/null || echo unknown` ++uname -v = `(uname -v) 2>/dev/null || echo unknown` ++ ++/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` ++/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` ++ ++/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` ++/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` ++/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` ++/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` ++/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` ++/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` ++/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` ++ ++_ASUNAME ++ ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ $as_echo "PATH: $as_dir" ++ done ++IFS=$as_save_IFS ++ ++} >&5 ++ ++cat >&5 <<_ACEOF ++ ++ ++## ----------- ## ++## Core tests. ## ++## ----------- ## ++ ++_ACEOF ++ ++ ++# Keep a trace of the command line. ++# Strip out --no-create and --no-recursion so they do not pile up. ++# Strip out --silent because we don't want to record it for future runs. ++# Also quote any args containing shell meta-characters. ++# Make two passes to allow for proper duplicate-argument suppression. ++ac_configure_args= ++ac_configure_args0= ++ac_configure_args1= ++ac_must_keep_next=false ++for ac_pass in 1 2 ++do ++ for ac_arg ++ do ++ case $ac_arg in ++ -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; ++ -q | -quiet | --quiet | --quie | --qui | --qu | --q \ ++ | -silent | --silent | --silen | --sile | --sil) ++ continue ;; ++ *\'*) ++ ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; ++ esac ++ case $ac_pass in ++ 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;; ++ 2) ++ as_fn_append ac_configure_args1 " '$ac_arg'" ++ if test $ac_must_keep_next = true; then ++ ac_must_keep_next=false # Got value, back to normal. ++ else ++ case $ac_arg in ++ *=* | --config-cache | -C | -disable-* | --disable-* \ ++ | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ ++ | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ ++ | -with-* | --with-* | -without-* | --without-* | --x) ++ case "$ac_configure_args0 " in ++ "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; ++ esac ++ ;; ++ -* ) ac_must_keep_next=true ;; ++ esac ++ fi ++ as_fn_append ac_configure_args " '$ac_arg'" ++ ;; ++ esac ++ done ++done ++{ ac_configure_args0=; unset ac_configure_args0;} ++{ ac_configure_args1=; unset ac_configure_args1;} ++ ++# When interrupted or exit'd, cleanup temporary files, and complete ++# config.log. We remove comments because anyway the quotes in there ++# would cause problems or look ugly. ++# WARNING: Use '\'' to represent an apostrophe within the trap. ++# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. ++trap 'exit_status=$? ++ # Save into config.log some information that might help in debugging. ++ { ++ echo ++ ++ $as_echo "## ---------------- ## ++## Cache variables. ## ++## ---------------- ##" ++ echo ++ # The following way of writing the cache mishandles newlines in values, ++( ++ for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do ++ eval ac_val=\$$ac_var ++ case $ac_val in #( ++ *${as_nl}*) ++ case $ac_var in #( ++ *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 ++$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; ++ esac ++ case $ac_var in #( ++ _ | IFS | as_nl) ;; #( ++ BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( ++ *) { eval $ac_var=; unset $ac_var;} ;; ++ esac ;; ++ esac ++ done ++ (set) 2>&1 | ++ case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( ++ *${as_nl}ac_space=\ *) ++ sed -n \ ++ "s/'\''/'\''\\\\'\'''\''/g; ++ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" ++ ;; #( ++ *) ++ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" ++ ;; ++ esac | ++ sort ++) ++ echo ++ ++ $as_echo "## ----------------- ## ++## Output variables. ## ++## ----------------- ##" ++ echo ++ for ac_var in $ac_subst_vars ++ do ++ eval ac_val=\$$ac_var ++ case $ac_val in ++ *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; ++ esac ++ $as_echo "$ac_var='\''$ac_val'\''" ++ done | sort ++ echo ++ ++ if test -n "$ac_subst_files"; then ++ $as_echo "## ------------------- ## ++## File substitutions. ## ++## ------------------- ##" ++ echo ++ for ac_var in $ac_subst_files ++ do ++ eval ac_val=\$$ac_var ++ case $ac_val in ++ *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; ++ esac ++ $as_echo "$ac_var='\''$ac_val'\''" ++ done | sort ++ echo ++ fi ++ ++ if test -s confdefs.h; then ++ $as_echo "## ----------- ## ++## confdefs.h. ## ++## ----------- ##" ++ echo ++ cat confdefs.h ++ echo ++ fi ++ test "$ac_signal" != 0 && ++ $as_echo "$as_me: caught signal $ac_signal" ++ $as_echo "$as_me: exit $exit_status" ++ } >&5 ++ rm -f core *.core core.conftest.* && ++ rm -f -r conftest* confdefs* conf$$* $ac_clean_files && ++ exit $exit_status ++' 0 ++for ac_signal in 1 2 13 15; do ++ trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal ++done ++ac_signal=0 ++ ++# confdefs.h avoids OS command line length limits that DEFS can exceed. ++rm -f -r conftest* confdefs.h ++ ++$as_echo "/* confdefs.h */" > confdefs.h ++ ++# Predefined preprocessor variables. ++ ++cat >>confdefs.h <<_ACEOF ++@%:@define PACKAGE_NAME "$PACKAGE_NAME" ++_ACEOF ++ ++cat >>confdefs.h <<_ACEOF ++@%:@define PACKAGE_TARNAME "$PACKAGE_TARNAME" ++_ACEOF ++ ++cat >>confdefs.h <<_ACEOF ++@%:@define PACKAGE_VERSION "$PACKAGE_VERSION" ++_ACEOF ++ ++cat >>confdefs.h <<_ACEOF ++@%:@define PACKAGE_STRING "$PACKAGE_STRING" ++_ACEOF ++ ++cat >>confdefs.h <<_ACEOF ++@%:@define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" ++_ACEOF ++ ++cat >>confdefs.h <<_ACEOF ++@%:@define PACKAGE_URL "$PACKAGE_URL" ++_ACEOF ++ ++ ++# Let the site file select an alternate cache file if it wants to. ++# Prefer an explicitly selected file to automatically selected ones. ++ac_site_file1=NONE ++ac_site_file2=NONE ++if test -n "$CONFIG_SITE"; then ++ # We do not want a PATH search for config.site. ++ case $CONFIG_SITE in @%:@(( ++ -*) ac_site_file1=./$CONFIG_SITE;; ++ */*) ac_site_file1=$CONFIG_SITE;; ++ *) ac_site_file1=./$CONFIG_SITE;; ++ esac ++elif test "x$prefix" != xNONE; then ++ ac_site_file1=$prefix/share/config.site ++ ac_site_file2=$prefix/etc/config.site ++else ++ ac_site_file1=$ac_default_prefix/share/config.site ++ ac_site_file2=$ac_default_prefix/etc/config.site ++fi ++for ac_site_file in "$ac_site_file1" "$ac_site_file2" ++do ++ test "x$ac_site_file" = xNONE && continue ++ if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5 ++$as_echo "$as_me: loading site script $ac_site_file" >&6;} ++ sed 's/^/| /' "$ac_site_file" >&5 ++ . "$ac_site_file" \ ++ || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 ++$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} ++as_fn_error $? "failed to load site script $ac_site_file ++See \`config.log' for more details" "$LINENO" 5; } ++ fi ++done ++ ++if test -r "$cache_file"; then ++ # Some versions of bash will fail to source /dev/null (special files ++ # actually), so we avoid doing that. DJGPP emulates it as a regular file. ++ if test /dev/null != "$cache_file" && test -f "$cache_file"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5 ++$as_echo "$as_me: loading cache $cache_file" >&6;} ++ case $cache_file in ++ [\\/]* | ?:[\\/]* ) . "$cache_file";; ++ *) . "./$cache_file";; ++ esac ++ fi ++else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5 ++$as_echo "$as_me: creating cache $cache_file" >&6;} ++ >$cache_file ++fi ++ ++# Check that the precious variables saved in the cache have kept the same ++# value. ++ac_cache_corrupted=false ++for ac_var in $ac_precious_vars; do ++ eval ac_old_set=\$ac_cv_env_${ac_var}_set ++ eval ac_new_set=\$ac_env_${ac_var}_set ++ eval ac_old_val=\$ac_cv_env_${ac_var}_value ++ eval ac_new_val=\$ac_env_${ac_var}_value ++ case $ac_old_set,$ac_new_set in ++ set,) ++ { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 ++$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} ++ ac_cache_corrupted=: ;; ++ ,set) ++ { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5 ++$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} ++ ac_cache_corrupted=: ;; ++ ,);; ++ *) ++ if test "x$ac_old_val" != "x$ac_new_val"; then ++ # differences in whitespace do not lead to failure. ++ ac_old_val_w=`echo x $ac_old_val` ++ ac_new_val_w=`echo x $ac_new_val` ++ if test "$ac_old_val_w" != "$ac_new_val_w"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5 ++$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} ++ ac_cache_corrupted=: ++ else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 ++$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;} ++ eval $ac_var=\$ac_old_val ++ fi ++ { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5 ++$as_echo "$as_me: former value: \`$ac_old_val'" >&2;} ++ { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5 ++$as_echo "$as_me: current value: \`$ac_new_val'" >&2;} ++ fi;; ++ esac ++ # Pass precious variables to config.status. ++ if test "$ac_new_set" = set; then ++ case $ac_new_val in ++ *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; ++ *) ac_arg=$ac_var=$ac_new_val ;; ++ esac ++ case " $ac_configure_args " in ++ *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. ++ *) as_fn_append ac_configure_args " '$ac_arg'" ;; ++ esac ++ fi ++done ++if $ac_cache_corrupted; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 ++$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} ++ { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5 ++$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;} ++ as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5 ++fi ++## -------------------- ## ++## Main body of script. ## ++## -------------------- ## ++ ++ac_ext=c ++ac_cpp='$CPP $CPPFLAGS' ++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_c_compiler_gnu ++ ++ ++am__api_version='1.11' ++ ++ac_aux_dir= ++for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do ++ if test -f "$ac_dir/install-sh"; then ++ ac_aux_dir=$ac_dir ++ ac_install_sh="$ac_aux_dir/install-sh -c" ++ break ++ elif test -f "$ac_dir/install.sh"; then ++ ac_aux_dir=$ac_dir ++ ac_install_sh="$ac_aux_dir/install.sh -c" ++ break ++ elif test -f "$ac_dir/shtool"; then ++ ac_aux_dir=$ac_dir ++ ac_install_sh="$ac_aux_dir/shtool install -c" ++ break ++ fi ++done ++if test -z "$ac_aux_dir"; then ++ as_fn_error $? "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5 ++fi ++ ++# These three variables are undocumented and unsupported, ++# and are intended to be withdrawn in a future Autoconf release. ++# They can cause serious problems if a builder's source tree is in a directory ++# whose full name contains unusual characters. ++ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. ++ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. ++ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. ++ ++ ++# Find a good install program. We prefer a C program (faster), ++# so one script is as good as another. But avoid the broken or ++# incompatible versions: ++# SysV /etc/install, /usr/sbin/install ++# SunOS /usr/etc/install ++# IRIX /sbin/install ++# AIX /bin/install ++# AmigaOS /C/install, which installs bootblocks on floppy discs ++# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag ++# AFS /usr/afsws/bin/install, which mishandles nonexistent args ++# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" ++# OS/2's system install, which has a completely different semantic ++# ./install, which can be erroneously created by make from ./install.sh. ++# Reject install programs that cannot install multiple files. ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5 ++$as_echo_n "checking for a BSD-compatible install... " >&6; } ++if test -z "$INSTALL"; then ++if ${ac_cv_path_install+:} false; then : ++ $as_echo_n "(cached) " >&6 ++else ++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ # Account for people who put trailing slashes in PATH elements. ++case $as_dir/ in @%:@(( ++ ./ | .// | /[cC]/* | \ ++ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ ++ ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \ ++ /usr/ucb/* ) ;; ++ *) ++ # OSF1 and SCO ODT 3.0 have their own names for install. ++ # Don't use installbsd from OSF since it installs stuff as root ++ # by default. ++ for ac_prog in ginstall scoinst install; do ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then ++ if test $ac_prog = install && ++ grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then ++ # AIX install. It has an incompatible calling convention. ++ : ++ elif test $ac_prog = install && ++ grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then ++ # program-specific install script used by HP pwplus--don't use. ++ : ++ else ++ rm -rf conftest.one conftest.two conftest.dir ++ echo one > conftest.one ++ echo two > conftest.two ++ mkdir conftest.dir ++ if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" && ++ test -s conftest.one && test -s conftest.two && ++ test -s conftest.dir/conftest.one && ++ test -s conftest.dir/conftest.two ++ then ++ ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" ++ break 3 ++ fi ++ fi ++ fi ++ done ++ done ++ ;; ++esac ++ ++ done ++IFS=$as_save_IFS ++ ++rm -rf conftest.one conftest.two conftest.dir ++ ++fi ++ if test "${ac_cv_path_install+set}" = set; then ++ INSTALL=$ac_cv_path_install ++ else ++ # As a last resort, use the slow shell script. Don't cache a ++ # value for INSTALL within a source directory, because that will ++ # break other packages using the cache if that directory is ++ # removed, or if the value is a relative name. ++ INSTALL=$ac_install_sh ++ fi ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5 ++$as_echo "$INSTALL" >&6; } ++ ++# Use test -z because SunOS4 sh mishandles braces in ${var-val}. ++# It thinks the first close brace ends the variable substitution. ++test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' ++ ++test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' ++ ++test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' ++ ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5 ++$as_echo_n "checking whether build environment is sane... " >&6; } ++# Just in case ++sleep 1 ++echo timestamp > conftest.file ++# Reject unsafe characters in $srcdir or the absolute working directory ++# name. Accept space and tab only in the latter. ++am_lf=' ++' ++case `pwd` in ++ *[\\\"\#\$\&\'\`$am_lf]*) ++ as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;; ++esac ++case $srcdir in ++ *[\\\"\#\$\&\'\`$am_lf\ \ ]*) ++ as_fn_error $? "unsafe srcdir value: \`$srcdir'" "$LINENO" 5;; ++esac ++ ++# Do `set' in a subshell so we don't clobber the current shell's ++# arguments. Must try -L first in case configure is actually a ++# symlink; some systems play weird games with the mod time of symlinks ++# (eg FreeBSD returns the mod time of the symlink's containing ++# directory). ++if ( ++ set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` ++ if test "$*" = "X"; then ++ # -L didn't work. ++ set X `ls -t "$srcdir/configure" conftest.file` ++ fi ++ rm -f conftest.file ++ if test "$*" != "X $srcdir/configure conftest.file" \ ++ && test "$*" != "X conftest.file $srcdir/configure"; then ++ ++ # If neither matched, then we have a broken ls. This can happen ++ # if, for instance, CONFIG_SHELL is bash and it inherits a ++ # broken ls alias from the environment. This has actually ++ # happened. Such a system could not be considered "sane". ++ as_fn_error $? "ls -t appears to fail. Make sure there is not a broken ++alias in your environment" "$LINENO" 5 ++ fi ++ ++ test "$2" = conftest.file ++ ) ++then ++ # Ok. ++ : ++else ++ as_fn_error $? "newly created file is older than distributed files! ++Check your system clock" "$LINENO" 5 ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 ++$as_echo "yes" >&6; } ++test "$program_prefix" != NONE && ++ program_transform_name="s&^&$program_prefix&;$program_transform_name" ++# Use a double $ so make ignores it. ++test "$program_suffix" != NONE && ++ program_transform_name="s&\$&$program_suffix&;$program_transform_name" ++# Double any \ or $. ++# By default was `s,x,x', remove it if useless. ++ac_script='s/[\\$]/&&/g;s/;s,x,x,$//' ++program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"` ++ ++# expand $ac_aux_dir to an absolute path ++am_aux_dir=`cd $ac_aux_dir && pwd` ++ ++if test x"${MISSING+set}" != xset; then ++ case $am_aux_dir in ++ *\ * | *\ *) ++ MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; ++ *) ++ MISSING="\${SHELL} $am_aux_dir/missing" ;; ++ esac ++fi ++# Use eval to expand $SHELL ++if eval "$MISSING --run true"; then ++ am_missing_run="$MISSING --run " ++else ++ am_missing_run= ++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`missing' script is too old or missing" >&5 ++$as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;} ++fi ++ ++if test x"${install_sh}" != xset; then ++ case $am_aux_dir in ++ *\ * | *\ *) ++ install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; ++ *) ++ install_sh="\${SHELL} $am_aux_dir/install-sh" ++ esac ++fi ++ ++# Installed binaries are usually stripped using `strip' when the user ++# run `make install-strip'. However `strip' might not be the right ++# tool to use in cross-compilation environments, therefore Automake ++# will honor the `STRIP' environment variable to overrule this program. ++if test "$cross_compiling" != no; then ++ if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. ++set dummy ${ac_tool_prefix}strip; ac_word=$2 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if ${ac_cv_prog_STRIP+:} false; then : ++ $as_echo_n "(cached) " >&6 ++else ++ if test -n "$STRIP"; then ++ ac_cv_prog_STRIP="$STRIP" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_STRIP="${ac_tool_prefix}strip" ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++ done ++IFS=$as_save_IFS ++ ++fi ++fi ++STRIP=$ac_cv_prog_STRIP ++if test -n "$STRIP"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 ++$as_echo "$STRIP" >&6; } ++else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } ++fi ++ ++ ++fi ++if test -z "$ac_cv_prog_STRIP"; then ++ ac_ct_STRIP=$STRIP ++ # Extract the first word of "strip", so it can be a program name with args. ++set dummy strip; ac_word=$2 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if ${ac_cv_prog_ac_ct_STRIP+:} false; then : ++ $as_echo_n "(cached) " >&6 ++else ++ if test -n "$ac_ct_STRIP"; then ++ ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_ac_ct_STRIP="strip" ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++ done ++IFS=$as_save_IFS ++ ++fi ++fi ++ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP ++if test -n "$ac_ct_STRIP"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 ++$as_echo "$ac_ct_STRIP" >&6; } ++else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } ++fi ++ ++ if test "x$ac_ct_STRIP" = x; then ++ STRIP=":" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 ++$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ++ac_tool_warned=yes ;; ++esac ++ STRIP=$ac_ct_STRIP ++ fi ++else ++ STRIP="$ac_cv_prog_STRIP" ++fi ++ ++fi ++INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" ++ ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5 ++$as_echo_n "checking for a thread-safe mkdir -p... " >&6; } ++if test -z "$MKDIR_P"; then ++ if ${ac_cv_path_mkdir+:} false; then : ++ $as_echo_n "(cached) " >&6 ++else ++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_prog in mkdir gmkdir; do ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue ++ case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #( ++ 'mkdir (GNU coreutils) '* | \ ++ 'mkdir (coreutils) '* | \ ++ 'mkdir (fileutils) '4.1*) ++ ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext ++ break 3;; ++ esac ++ done ++ done ++ done ++IFS=$as_save_IFS ++ ++fi ++ ++ test -d ./--version && rmdir ./--version ++ if test "${ac_cv_path_mkdir+set}" = set; then ++ MKDIR_P="$ac_cv_path_mkdir -p" ++ else ++ # As a last resort, use the slow shell script. Don't cache a ++ # value for MKDIR_P within a source directory, because that will ++ # break other packages using the cache if that directory is ++ # removed, or if the value is a relative name. ++ MKDIR_P="$ac_install_sh -d" ++ fi ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5 ++$as_echo "$MKDIR_P" >&6; } ++ ++mkdir_p="$MKDIR_P" ++case $mkdir_p in ++ [\\/$]* | ?:[\\/]*) ;; ++ */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;; ++esac ++ ++for ac_prog in gawk mawk nawk awk ++do ++ # Extract the first word of "$ac_prog", so it can be a program name with args. ++set dummy $ac_prog; ac_word=$2 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if ${ac_cv_prog_AWK+:} false; then : ++ $as_echo_n "(cached) " >&6 ++else ++ if test -n "$AWK"; then ++ ac_cv_prog_AWK="$AWK" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_AWK="$ac_prog" ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++ done ++IFS=$as_save_IFS ++ ++fi ++fi ++AWK=$ac_cv_prog_AWK ++if test -n "$AWK"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5 ++$as_echo "$AWK" >&6; } ++else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } ++fi ++ ++ ++ test -n "$AWK" && break ++done ++ ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5 ++$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } ++set x ${MAKE-make} ++ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` ++if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then : ++ $as_echo_n "(cached) " >&6 ++else ++ cat >conftest.make <<\_ACEOF ++SHELL = /bin/sh ++all: ++ @echo '@@@%%%=$(MAKE)=@@@%%%' ++_ACEOF ++# GNU make sometimes prints "make[1]: Entering ...", which would confuse us. ++case `${MAKE-make} -f conftest.make 2>/dev/null` in ++ *@@@%%%=?*=@@@%%%*) ++ eval ac_cv_prog_make_${ac_make}_set=yes;; ++ *) ++ eval ac_cv_prog_make_${ac_make}_set=no;; ++esac ++rm -f conftest.make ++fi ++if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 ++$as_echo "yes" >&6; } ++ SET_MAKE= ++else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } ++ SET_MAKE="MAKE=${MAKE-make}" ++fi ++ ++rm -rf .tst 2>/dev/null ++mkdir .tst 2>/dev/null ++if test -d .tst; then ++ am__leading_dot=. ++else ++ am__leading_dot=_ ++fi ++rmdir .tst 2>/dev/null ++ ++if test "`cd $srcdir && pwd`" != "`pwd`"; then ++ # Use -I$(srcdir) only when $(srcdir) != ., so that make's output ++ # is not polluted with repeated "-I." ++ am__isrc=' -I$(srcdir)' ++ # test to see if srcdir already configured ++ if test -f $srcdir/config.status; then ++ as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5 ++ fi ++fi ++ ++# test whether we have cygpath ++if test -z "$CYGPATH_W"; then ++ if (cygpath --version) >/dev/null 2>/dev/null; then ++ CYGPATH_W='cygpath -w' ++ else ++ CYGPATH_W=echo ++ fi ++fi ++ ++ ++# Define the identity of the package. ++ PACKAGE='fcoe-utils' ++ VERSION='1.0.9' ++ ++ ++cat >>confdefs.h <<_ACEOF ++@%:@define PACKAGE "$PACKAGE" ++_ACEOF ++ ++ ++cat >>confdefs.h <<_ACEOF ++@%:@define VERSION "$VERSION" ++_ACEOF ++ ++# Some tools Automake needs. ++ ++ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"} ++ ++ ++AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"} ++ ++ ++AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"} ++ ++ ++AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"} ++ ++ ++MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} ++ ++# We need awk for the "check" target. The system "awk" is bad on ++# some platforms. ++# Always define AMTAR for backward compatibility. ++ ++AMTAR=${AMTAR-"${am_missing_run}tar"} ++ ++am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -' ++ ++ ++ ++ ++ ++ ++ac_ext=c ++ac_cpp='$CPP $CPPFLAGS' ++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_c_compiler_gnu ++if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. ++set dummy ${ac_tool_prefix}gcc; ac_word=$2 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if ${ac_cv_prog_CC+:} false; then : ++ $as_echo_n "(cached) " >&6 ++else ++ if test -n "$CC"; then ++ ac_cv_prog_CC="$CC" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_CC="${ac_tool_prefix}gcc" ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++ done ++IFS=$as_save_IFS ++ ++fi ++fi ++CC=$ac_cv_prog_CC ++if test -n "$CC"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 ++$as_echo "$CC" >&6; } ++else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } ++fi ++ ++ ++fi ++if test -z "$ac_cv_prog_CC"; then ++ ac_ct_CC=$CC ++ # Extract the first word of "gcc", so it can be a program name with args. ++set dummy gcc; ac_word=$2 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if ${ac_cv_prog_ac_ct_CC+:} false; then : ++ $as_echo_n "(cached) " >&6 ++else ++ if test -n "$ac_ct_CC"; then ++ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_ac_ct_CC="gcc" ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++ done ++IFS=$as_save_IFS ++ ++fi ++fi ++ac_ct_CC=$ac_cv_prog_ac_ct_CC ++if test -n "$ac_ct_CC"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 ++$as_echo "$ac_ct_CC" >&6; } ++else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } ++fi ++ ++ if test "x$ac_ct_CC" = x; then ++ CC="" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 ++$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ++ac_tool_warned=yes ;; ++esac ++ CC=$ac_ct_CC ++ fi ++else ++ CC="$ac_cv_prog_CC" ++fi ++ ++if test -z "$CC"; then ++ if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. ++set dummy ${ac_tool_prefix}cc; ac_word=$2 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if ${ac_cv_prog_CC+:} false; then : ++ $as_echo_n "(cached) " >&6 ++else ++ if test -n "$CC"; then ++ ac_cv_prog_CC="$CC" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_CC="${ac_tool_prefix}cc" ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++ done ++IFS=$as_save_IFS ++ ++fi ++fi ++CC=$ac_cv_prog_CC ++if test -n "$CC"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 ++$as_echo "$CC" >&6; } ++else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } ++fi ++ ++ ++ fi ++fi ++if test -z "$CC"; then ++ # Extract the first word of "cc", so it can be a program name with args. ++set dummy cc; ac_word=$2 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if ${ac_cv_prog_CC+:} false; then : ++ $as_echo_n "(cached) " >&6 ++else ++ if test -n "$CC"; then ++ ac_cv_prog_CC="$CC" # Let the user override the test. ++else ++ ac_prog_rejected=no ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then ++ ac_prog_rejected=yes ++ continue ++ fi ++ ac_cv_prog_CC="cc" ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++ done ++IFS=$as_save_IFS ++ ++if test $ac_prog_rejected = yes; then ++ # We found a bogon in the path, so make sure we never use it. ++ set dummy $ac_cv_prog_CC ++ shift ++ if test $@%:@ != 0; then ++ # We chose a different compiler from the bogus one. ++ # However, it has the same basename, so the bogon will be chosen ++ # first if we set CC to just the basename; use the full file name. ++ shift ++ ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" ++ fi ++fi ++fi ++fi ++CC=$ac_cv_prog_CC ++if test -n "$CC"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 ++$as_echo "$CC" >&6; } ++else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } ++fi ++ ++ ++fi ++if test -z "$CC"; then ++ if test -n "$ac_tool_prefix"; then ++ for ac_prog in cl.exe ++ do ++ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. ++set dummy $ac_tool_prefix$ac_prog; ac_word=$2 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if ${ac_cv_prog_CC+:} false; then : ++ $as_echo_n "(cached) " >&6 ++else ++ if test -n "$CC"; then ++ ac_cv_prog_CC="$CC" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_CC="$ac_tool_prefix$ac_prog" ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++ done ++IFS=$as_save_IFS ++ ++fi ++fi ++CC=$ac_cv_prog_CC ++if test -n "$CC"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 ++$as_echo "$CC" >&6; } ++else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } ++fi ++ ++ ++ test -n "$CC" && break ++ done ++fi ++if test -z "$CC"; then ++ ac_ct_CC=$CC ++ for ac_prog in cl.exe ++do ++ # Extract the first word of "$ac_prog", so it can be a program name with args. ++set dummy $ac_prog; ac_word=$2 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if ${ac_cv_prog_ac_ct_CC+:} false; then : ++ $as_echo_n "(cached) " >&6 ++else ++ if test -n "$ac_ct_CC"; then ++ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_ac_ct_CC="$ac_prog" ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++ done ++IFS=$as_save_IFS ++ ++fi ++fi ++ac_ct_CC=$ac_cv_prog_ac_ct_CC ++if test -n "$ac_ct_CC"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 ++$as_echo "$ac_ct_CC" >&6; } ++else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } ++fi ++ ++ ++ test -n "$ac_ct_CC" && break ++done ++ ++ if test "x$ac_ct_CC" = x; then ++ CC="" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 ++$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ++ac_tool_warned=yes ;; ++esac ++ CC=$ac_ct_CC ++ fi ++fi ++ ++fi ++ ++ ++test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 ++$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} ++as_fn_error $? "no acceptable C compiler found in \$PATH ++See \`config.log' for more details" "$LINENO" 5; } ++ ++# Provide some information about the compiler. ++$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 ++set X $ac_compile ++ac_compiler=$2 ++for ac_option in --version -v -V -qversion; do ++ { { ac_try="$ac_compiler $ac_option >&5" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" ++$as_echo "$ac_try_echo"; } >&5 ++ (eval "$ac_compiler $ac_option >&5") 2>conftest.err ++ ac_status=$? ++ if test -s conftest.err; then ++ sed '10a\ ++... rest of stderr output deleted ... ++ 10q' conftest.err >conftest.er1 ++ cat conftest.er1 >&5 ++ fi ++ rm -f conftest.er1 conftest.err ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; } ++done ++ ++cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++ac_clean_files_save=$ac_clean_files ++ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out" ++# Try to create an executable without -o first, disregard a.out. ++# It will help us diagnose broken compilers, and finding out an intuition ++# of exeext. ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5 ++$as_echo_n "checking whether the C compiler works... " >&6; } ++ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` ++ ++# The possible output files: ++ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*" ++ ++ac_rmfiles= ++for ac_file in $ac_files ++do ++ case $ac_file in ++ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; ++ * ) ac_rmfiles="$ac_rmfiles $ac_file";; ++ esac ++done ++rm -f $ac_rmfiles ++ ++if { { ac_try="$ac_link_default" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" ++$as_echo "$ac_try_echo"; } >&5 ++ (eval "$ac_link_default") 2>&5 ++ ac_status=$? ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; }; then : ++ # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. ++# So ignore a value of `no', otherwise this would lead to `EXEEXT = no' ++# in a Makefile. We should not override ac_cv_exeext if it was cached, ++# so that the user can short-circuit this test for compilers unknown to ++# Autoconf. ++for ac_file in $ac_files '' ++do ++ test -f "$ac_file" || continue ++ case $ac_file in ++ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ++ ;; ++ [ab].out ) ++ # We found the default executable, but exeext='' is most ++ # certainly right. ++ break;; ++ *.* ) ++ if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; ++ then :; else ++ ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` ++ fi ++ # We set ac_cv_exeext here because the later test for it is not ++ # safe: cross compilers may not add the suffix if given an `-o' ++ # argument, so we may need to know it at that point already. ++ # Even if this section looks crufty: it has the advantage of ++ # actually working. ++ break;; ++ * ) ++ break;; ++ esac ++done ++test "$ac_cv_exeext" = no && ac_cv_exeext= ++ ++else ++ ac_file='' ++fi ++if test -z "$ac_file"; then : ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } ++$as_echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 ++$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} ++as_fn_error 77 "C compiler cannot create executables ++See \`config.log' for more details" "$LINENO" 5; } ++else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 ++$as_echo "yes" >&6; } ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5 ++$as_echo_n "checking for C compiler default output file name... " >&6; } ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5 ++$as_echo "$ac_file" >&6; } ++ac_exeext=$ac_cv_exeext ++ ++rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out ++ac_clean_files=$ac_clean_files_save ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5 ++$as_echo_n "checking for suffix of executables... " >&6; } ++if { { ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" ++$as_echo "$ac_try_echo"; } >&5 ++ (eval "$ac_link") 2>&5 ++ ac_status=$? ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; }; then : ++ # If both `conftest.exe' and `conftest' are `present' (well, observable) ++# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will ++# work properly (i.e., refer to `conftest.exe'), while it won't with ++# `rm'. ++for ac_file in conftest.exe conftest conftest.*; do ++ test -f "$ac_file" || continue ++ case $ac_file in ++ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; ++ *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` ++ break;; ++ * ) break;; ++ esac ++done ++else ++ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 ++$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} ++as_fn_error $? "cannot compute suffix of executables: cannot compile and link ++See \`config.log' for more details" "$LINENO" 5; } ++fi ++rm -f conftest conftest$ac_cv_exeext ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5 ++$as_echo "$ac_cv_exeext" >&6; } ++ ++rm -f conftest.$ac_ext ++EXEEXT=$ac_cv_exeext ++ac_exeext=$EXEEXT ++cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++@%:@include ++int ++main () ++{ ++FILE *f = fopen ("conftest.out", "w"); ++ return ferror (f) || fclose (f) != 0; ++ ++ ; ++ return 0; ++} ++_ACEOF ++ac_clean_files="$ac_clean_files conftest.out" ++# Check that the compiler produces executables we can run. If not, either ++# the compiler is broken, or we cross compile. ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5 ++$as_echo_n "checking whether we are cross compiling... " >&6; } ++if test "$cross_compiling" != yes; then ++ { { ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" ++$as_echo "$ac_try_echo"; } >&5 ++ (eval "$ac_link") 2>&5 ++ ac_status=$? ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; } ++ if { ac_try='./conftest$ac_cv_exeext' ++ { { case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" ++$as_echo "$ac_try_echo"; } >&5 ++ (eval "$ac_try") 2>&5 ++ ac_status=$? ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; }; }; then ++ cross_compiling=no ++ else ++ if test "$cross_compiling" = maybe; then ++ cross_compiling=yes ++ else ++ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 ++$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} ++as_fn_error $? "cannot run C compiled programs. ++If you meant to cross compile, use \`--host'. ++See \`config.log' for more details" "$LINENO" 5; } ++ fi ++ fi ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5 ++$as_echo "$cross_compiling" >&6; } ++ ++rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out ++ac_clean_files=$ac_clean_files_save ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5 ++$as_echo_n "checking for suffix of object files... " >&6; } ++if ${ac_cv_objext+:} false; then : ++ $as_echo_n "(cached) " >&6 ++else ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.o conftest.obj ++if { { ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" ++$as_echo "$ac_try_echo"; } >&5 ++ (eval "$ac_compile") 2>&5 ++ ac_status=$? ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; }; then : ++ for ac_file in conftest.o conftest.obj conftest.*; do ++ test -f "$ac_file" || continue; ++ case $ac_file in ++ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;; ++ *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` ++ break;; ++ esac ++done ++else ++ $as_echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 ++$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} ++as_fn_error $? "cannot compute suffix of object files: cannot compile ++See \`config.log' for more details" "$LINENO" 5; } ++fi ++rm -f conftest.$ac_cv_objext conftest.$ac_ext ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5 ++$as_echo "$ac_cv_objext" >&6; } ++OBJEXT=$ac_cv_objext ++ac_objext=$OBJEXT ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5 ++$as_echo_n "checking whether we are using the GNU C compiler... " >&6; } ++if ${ac_cv_c_compiler_gnu+:} false; then : ++ $as_echo_n "(cached) " >&6 ++else ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++#ifndef __GNUC__ ++ choke me ++#endif ++ ++ ; ++ return 0; ++} ++_ACEOF ++if ac_fn_c_try_compile "$LINENO"; then : ++ ac_compiler_gnu=yes ++else ++ ac_compiler_gnu=no ++fi ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++ac_cv_c_compiler_gnu=$ac_compiler_gnu ++ ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5 ++$as_echo "$ac_cv_c_compiler_gnu" >&6; } ++if test $ac_compiler_gnu = yes; then ++ GCC=yes ++else ++ GCC= ++fi ++ac_test_CFLAGS=${CFLAGS+set} ++ac_save_CFLAGS=$CFLAGS ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 ++$as_echo_n "checking whether $CC accepts -g... " >&6; } ++if ${ac_cv_prog_cc_g+:} false; then : ++ $as_echo_n "(cached) " >&6 ++else ++ ac_save_c_werror_flag=$ac_c_werror_flag ++ ac_c_werror_flag=yes ++ ac_cv_prog_cc_g=no ++ CFLAGS="-g" ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++if ac_fn_c_try_compile "$LINENO"; then : ++ ac_cv_prog_cc_g=yes ++else ++ CFLAGS="" ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++if ac_fn_c_try_compile "$LINENO"; then : ++ ++else ++ ac_c_werror_flag=$ac_save_c_werror_flag ++ CFLAGS="-g" ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++if ac_fn_c_try_compile "$LINENO"; then : ++ ac_cv_prog_cc_g=yes ++fi ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++fi ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++fi ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++ ac_c_werror_flag=$ac_save_c_werror_flag ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5 ++$as_echo "$ac_cv_prog_cc_g" >&6; } ++if test "$ac_test_CFLAGS" = set; then ++ CFLAGS=$ac_save_CFLAGS ++elif test $ac_cv_prog_cc_g = yes; then ++ if test "$GCC" = yes; then ++ CFLAGS="-g -O2" ++ else ++ CFLAGS="-g" ++ fi ++else ++ if test "$GCC" = yes; then ++ CFLAGS="-O2" ++ else ++ CFLAGS= ++ fi ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 ++$as_echo_n "checking for $CC option to accept ISO C89... " >&6; } ++if ${ac_cv_prog_cc_c89+:} false; then : ++ $as_echo_n "(cached) " >&6 ++else ++ ac_cv_prog_cc_c89=no ++ac_save_CC=$CC ++cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++#include ++#include ++#include ++#include ++/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ ++struct buf { int x; }; ++FILE * (*rcsopen) (struct buf *, struct stat *, int); ++static char *e (p, i) ++ char **p; ++ int i; ++{ ++ return p[i]; ++} ++static char *f (char * (*g) (char **, int), char **p, ...) ++{ ++ char *s; ++ va_list v; ++ va_start (v,p); ++ s = g (p, va_arg (v,int)); ++ va_end (v); ++ return s; ++} ++ ++/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has ++ function prototypes and stuff, but not '\xHH' hex character constants. ++ These don't provoke an error unfortunately, instead are silently treated ++ as 'x'. The following induces an error, until -std is added to get ++ proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an ++ array size at least. It's necessary to write '\x00'==0 to get something ++ that's true only with -std. */ ++int osf4_cc_array ['\x00' == 0 ? 1 : -1]; ++ ++/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters ++ inside strings and character constants. */ ++#define FOO(x) 'x' ++int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; ++ ++int test (int i, double x); ++struct s1 {int (*f) (int a);}; ++struct s2 {int (*f) (double a);}; ++int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); ++int argc; ++char **argv; ++int ++main () ++{ ++return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; ++ ; ++ return 0; ++} ++_ACEOF ++for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ ++ -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" ++do ++ CC="$ac_save_CC $ac_arg" ++ if ac_fn_c_try_compile "$LINENO"; then : ++ ac_cv_prog_cc_c89=$ac_arg ++fi ++rm -f core conftest.err conftest.$ac_objext ++ test "x$ac_cv_prog_cc_c89" != "xno" && break ++done ++rm -f conftest.$ac_ext ++CC=$ac_save_CC ++ ++fi ++# AC_CACHE_VAL ++case "x$ac_cv_prog_cc_c89" in ++ x) ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 ++$as_echo "none needed" >&6; } ;; ++ xno) ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 ++$as_echo "unsupported" >&6; } ;; ++ *) ++ CC="$CC $ac_cv_prog_cc_c89" ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 ++$as_echo "$ac_cv_prog_cc_c89" >&6; } ;; ++esac ++if test "x$ac_cv_prog_cc_c89" != xno; then : ++ ++fi ++ ++ac_ext=c ++ac_cpp='$CPP $CPPFLAGS' ++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_c_compiler_gnu ++DEPDIR="${am__leading_dot}deps" ++ ++ac_config_commands="$ac_config_commands depfiles" ++ ++ ++am_make=${MAKE-make} ++cat > confinc << 'END' ++am__doit: ++ @echo this is the am__doit target ++.PHONY: am__doit ++END ++# If we don't find an include directive, just comment out the code. ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5 ++$as_echo_n "checking for style of include used by $am_make... " >&6; } ++am__include="#" ++am__quote= ++_am_result=none ++# First try GNU make style include. ++echo "include confinc" > confmf ++# Ignore all kinds of additional output from `make'. ++case `$am_make -s -f confmf 2> /dev/null` in #( ++*the\ am__doit\ target*) ++ am__include=include ++ am__quote= ++ _am_result=GNU ++ ;; ++esac ++# Now try BSD make style include. ++if test "$am__include" = "#"; then ++ echo '.include "confinc"' > confmf ++ case `$am_make -s -f confmf 2> /dev/null` in #( ++ *the\ am__doit\ target*) ++ am__include=.include ++ am__quote="\"" ++ _am_result=BSD ++ ;; ++ esac ++fi ++ ++ ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5 ++$as_echo "$_am_result" >&6; } ++rm -f confinc confmf ++ ++@%:@ Check whether --enable-dependency-tracking was given. ++if test "${enable_dependency_tracking+set}" = set; then : ++ enableval=$enable_dependency_tracking; ++fi ++ ++if test "x$enable_dependency_tracking" != xno; then ++ am_depcomp="$ac_aux_dir/depcomp" ++ AMDEPBACKSLASH='\' ++fi ++ if test "x$enable_dependency_tracking" != xno; then ++ AMDEP_TRUE= ++ AMDEP_FALSE='#' ++else ++ AMDEP_TRUE='#' ++ AMDEP_FALSE= ++fi ++ ++ ++ ++depcc="$CC" am_compiler_list= ++ ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 ++$as_echo_n "checking dependency style of $depcc... " >&6; } ++if ${am_cv_CC_dependencies_compiler_type+:} false; then : ++ $as_echo_n "(cached) " >&6 ++else ++ if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then ++ # We make a subdir and do the tests there. Otherwise we can end up ++ # making bogus files that we don't know about and never remove. For ++ # instance it was reported that on HP-UX the gcc test will end up ++ # making a dummy file named `D' -- because `-MD' means `put the output ++ # in D'. ++ mkdir conftest.dir ++ # Copy depcomp to subdir because otherwise we won't find it if we're ++ # using a relative directory. ++ cp "$am_depcomp" conftest.dir ++ cd conftest.dir ++ # We will build objects and dependencies in a subdirectory because ++ # it helps to detect inapplicable dependency modes. For instance ++ # both Tru64's cc and ICC support -MD to output dependencies as a ++ # side effect of compilation, but ICC will put the dependencies in ++ # the current directory while Tru64 will put them in the object ++ # directory. ++ mkdir sub ++ ++ am_cv_CC_dependencies_compiler_type=none ++ if test "$am_compiler_list" = ""; then ++ am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` ++ fi ++ am__universal=false ++ case " $depcc " in #( ++ *\ -arch\ *\ -arch\ *) am__universal=true ;; ++ esac ++ ++ for depmode in $am_compiler_list; do ++ # Setup a source with many dependencies, because some compilers ++ # like to wrap large dependency lists on column 80 (with \), and ++ # we should not choose a depcomp mode which is confused by this. ++ # ++ # We need to recreate these files for each test, as the compiler may ++ # overwrite some of them when testing with obscure command lines. ++ # This happens at least with the AIX C compiler. ++ : > sub/conftest.c ++ for i in 1 2 3 4 5 6; do ++ echo '#include "conftst'$i'.h"' >> sub/conftest.c ++ # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with ++ # Solaris 8's {/usr,}/bin/sh. ++ touch sub/conftst$i.h ++ done ++ echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf ++ ++ # We check with `-c' and `-o' for the sake of the "dashmstdout" ++ # mode. It turns out that the SunPro C++ compiler does not properly ++ # handle `-M -o', and we need to detect this. Also, some Intel ++ # versions had trouble with output in subdirs ++ am__obj=sub/conftest.${OBJEXT-o} ++ am__minus_obj="-o $am__obj" ++ case $depmode in ++ gcc) ++ # This depmode causes a compiler race in universal mode. ++ test "$am__universal" = false || continue ++ ;; ++ nosideeffect) ++ # after this tag, mechanisms are not by side-effect, so they'll ++ # only be used when explicitly requested ++ if test "x$enable_dependency_tracking" = xyes; then ++ continue ++ else ++ break ++ fi ++ ;; ++ msvisualcpp | msvcmsys) ++ # This compiler won't grok `-c -o', but also, the minuso test has ++ # not run yet. These depmodes are late enough in the game, and ++ # so weak that their functioning should not be impacted. ++ am__obj=conftest.${OBJEXT-o} ++ am__minus_obj= ++ ;; ++ none) break ;; ++ esac ++ if depmode=$depmode \ ++ source=sub/conftest.c object=$am__obj \ ++ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ ++ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ ++ >/dev/null 2>conftest.err && ++ grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && ++ grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && ++ grep $am__obj sub/conftest.Po > /dev/null 2>&1 && ++ ${MAKE-make} -s -f confmf > /dev/null 2>&1; then ++ # icc doesn't choke on unknown options, it will just issue warnings ++ # or remarks (even with -Werror). So we grep stderr for any message ++ # that says an option was ignored or not supported. ++ # When given -MP, icc 7.0 and 7.1 complain thusly: ++ # icc: Command line warning: ignoring option '-M'; no argument required ++ # The diagnosis changed in icc 8.0: ++ # icc: Command line remark: option '-MP' not supported ++ if (grep 'ignoring option' conftest.err || ++ grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else ++ am_cv_CC_dependencies_compiler_type=$depmode ++ break ++ fi ++ fi ++ done ++ ++ cd .. ++ rm -rf conftest.dir ++else ++ am_cv_CC_dependencies_compiler_type=none ++fi ++ ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5 ++$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; } ++CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type ++ ++ if ++ test "x$enable_dependency_tracking" != xno \ ++ && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then ++ am__fastdepCC_TRUE= ++ am__fastdepCC_FALSE='#' ++else ++ am__fastdepCC_TRUE='#' ++ am__fastdepCC_FALSE= ++fi ++ ++ ++if test "x$CC" != xcc; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC and cc understand -c and -o together" >&5 ++$as_echo_n "checking whether $CC and cc understand -c and -o together... " >&6; } ++else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether cc understands -c and -o together" >&5 ++$as_echo_n "checking whether cc understands -c and -o together... " >&6; } ++fi ++set dummy $CC; ac_cc=`$as_echo "$2" | ++ sed 's/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/'` ++if eval \${ac_cv_prog_cc_${ac_cc}_c_o+:} false; then : ++ $as_echo_n "(cached) " >&6 ++else ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++# Make sure it works both with $CC and with simple cc. ++# We do the test twice because some compilers refuse to overwrite an ++# existing .o file with -o, though they will create one. ++ac_try='$CC -c conftest.$ac_ext -o conftest2.$ac_objext >&5' ++rm -f conftest2.* ++if { { case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" ++$as_echo "$ac_try_echo"; } >&5 ++ (eval "$ac_try") 2>&5 ++ ac_status=$? ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; } && ++ test -f conftest2.$ac_objext && { { case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" ++$as_echo "$ac_try_echo"; } >&5 ++ (eval "$ac_try") 2>&5 ++ ac_status=$? ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; }; ++then ++ eval ac_cv_prog_cc_${ac_cc}_c_o=yes ++ if test "x$CC" != xcc; then ++ # Test first that cc exists at all. ++ if { ac_try='cc -c conftest.$ac_ext >&5' ++ { { case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" ++$as_echo "$ac_try_echo"; } >&5 ++ (eval "$ac_try") 2>&5 ++ ac_status=$? ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; }; }; then ++ ac_try='cc -c conftest.$ac_ext -o conftest2.$ac_objext >&5' ++ rm -f conftest2.* ++ if { { case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" ++$as_echo "$ac_try_echo"; } >&5 ++ (eval "$ac_try") 2>&5 ++ ac_status=$? ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; } && ++ test -f conftest2.$ac_objext && { { case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" ++$as_echo "$ac_try_echo"; } >&5 ++ (eval "$ac_try") 2>&5 ++ ac_status=$? ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; }; ++ then ++ # cc works too. ++ : ++ else ++ # cc exists but doesn't like -o. ++ eval ac_cv_prog_cc_${ac_cc}_c_o=no ++ fi ++ fi ++ fi ++else ++ eval ac_cv_prog_cc_${ac_cc}_c_o=no ++fi ++rm -f core conftest* ++ ++fi ++if eval test \$ac_cv_prog_cc_${ac_cc}_c_o = yes; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 ++$as_echo "yes" >&6; } ++else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } ++ ++$as_echo "@%:@define NO_MINUS_C_MINUS_O 1" >>confdefs.h ++ ++fi ++ ++# FIXME: we rely on the cache variable name because ++# there is no other way. ++set dummy $CC ++am_cc=`echo $2 | sed 's/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/'` ++eval am_t=\$ac_cv_prog_cc_${am_cc}_c_o ++if test "$am_t" != yes; then ++ # Losing compiler, so override with the script. ++ # FIXME: It is wrong to rewrite CC. ++ # But if we don't then we get into trouble of one sort or another. ++ # A longer-term fix would be to have automake use am__CC in this case, ++ # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" ++ CC="$am_aux_dir/compile $CC" ++fi ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then ++ if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}pkg-config", so it can be a program name with args. ++set dummy ${ac_tool_prefix}pkg-config; ac_word=$2 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if ${ac_cv_path_PKG_CONFIG+:} false; then : ++ $as_echo_n "(cached) " >&6 ++else ++ case $PKG_CONFIG in ++ [\\/]* | ?:[\\/]*) ++ ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a path. ++ ;; ++ *) ++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_path_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext" ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++ done ++IFS=$as_save_IFS ++ ++ ;; ++esac ++fi ++PKG_CONFIG=$ac_cv_path_PKG_CONFIG ++if test -n "$PKG_CONFIG"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PKG_CONFIG" >&5 ++$as_echo "$PKG_CONFIG" >&6; } ++else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } ++fi ++ ++ ++fi ++if test -z "$ac_cv_path_PKG_CONFIG"; then ++ ac_pt_PKG_CONFIG=$PKG_CONFIG ++ # Extract the first word of "pkg-config", so it can be a program name with args. ++set dummy pkg-config; ac_word=$2 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if ${ac_cv_path_ac_pt_PKG_CONFIG+:} false; then : ++ $as_echo_n "(cached) " >&6 ++else ++ case $ac_pt_PKG_CONFIG in ++ [\\/]* | ?:[\\/]*) ++ ac_cv_path_ac_pt_PKG_CONFIG="$ac_pt_PKG_CONFIG" # Let the user override the test with a path. ++ ;; ++ *) ++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_path_ac_pt_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext" ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++ done ++IFS=$as_save_IFS ++ ++ ;; ++esac ++fi ++ac_pt_PKG_CONFIG=$ac_cv_path_ac_pt_PKG_CONFIG ++if test -n "$ac_pt_PKG_CONFIG"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_pt_PKG_CONFIG" >&5 ++$as_echo "$ac_pt_PKG_CONFIG" >&6; } ++else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } ++fi ++ ++ if test "x$ac_pt_PKG_CONFIG" = x; then ++ PKG_CONFIG="" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 ++$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ++ac_tool_warned=yes ;; ++esac ++ PKG_CONFIG=$ac_pt_PKG_CONFIG ++ fi ++else ++ PKG_CONFIG="$ac_cv_path_PKG_CONFIG" ++fi ++ ++fi ++if test -n "$PKG_CONFIG"; then ++ _pkg_min_version=0.9.0 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking pkg-config is at least version $_pkg_min_version" >&5 ++$as_echo_n "checking pkg-config is at least version $_pkg_min_version... " >&6; } ++ if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 ++$as_echo "yes" >&6; } ++ else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } ++ PKG_CONFIG="" ++ fi ++fi ++ ++pkg_failed=no ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for HBAAPI" >&5 ++$as_echo_n "checking for HBAAPI... " >&6; } ++ ++if test -n "$HBAAPI_CFLAGS"; then ++ pkg_cv_HBAAPI_CFLAGS="$HBAAPI_CFLAGS" ++ elif test -n "$PKG_CONFIG"; then ++ if test -n "$PKG_CONFIG" && \ ++ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"HBAAPI\""; } >&5 ++ ($PKG_CONFIG --exists --print-errors "HBAAPI") 2>&5 ++ ac_status=$? ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; }; then ++ pkg_cv_HBAAPI_CFLAGS=`$PKG_CONFIG --cflags "HBAAPI" 2>/dev/null` ++ test "x$?" != "x0" && pkg_failed=yes ++else ++ pkg_failed=yes ++fi ++ else ++ pkg_failed=untried ++fi ++if test -n "$HBAAPI_LIBS"; then ++ pkg_cv_HBAAPI_LIBS="$HBAAPI_LIBS" ++ elif test -n "$PKG_CONFIG"; then ++ if test -n "$PKG_CONFIG" && \ ++ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"HBAAPI\""; } >&5 ++ ($PKG_CONFIG --exists --print-errors "HBAAPI") 2>&5 ++ ac_status=$? ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; }; then ++ pkg_cv_HBAAPI_LIBS=`$PKG_CONFIG --libs "HBAAPI" 2>/dev/null` ++ test "x$?" != "x0" && pkg_failed=yes ++else ++ pkg_failed=yes ++fi ++ else ++ pkg_failed=untried ++fi ++ ++ ++ ++if test $pkg_failed = yes; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } ++ ++if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then ++ _pkg_short_errors_supported=yes ++else ++ _pkg_short_errors_supported=no ++fi ++ if test $_pkg_short_errors_supported = yes; then ++ HBAAPI_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "HBAAPI" 2>&1` ++ else ++ HBAAPI_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "HBAAPI" 2>&1` ++ fi ++ # Put the nasty error message in config.log where it belongs ++ echo "$HBAAPI_PKG_ERRORS" >&5 ++ ++ as_fn_error $? "Package requirements (HBAAPI) were not met: ++ ++$HBAAPI_PKG_ERRORS ++ ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. ++ ++Alternatively, you may set the environment variables HBAAPI_CFLAGS ++and HBAAPI_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details." "$LINENO" 5 ++elif test $pkg_failed = untried; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } ++ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 ++$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} ++as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. ++ ++Alternatively, you may set the environment variables HBAAPI_CFLAGS ++and HBAAPI_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++ ++To get pkg-config, see . ++See \`config.log' for more details" "$LINENO" 5; } ++else ++ HBAAPI_CFLAGS=$pkg_cv_HBAAPI_CFLAGS ++ HBAAPI_LIBS=$pkg_cv_HBAAPI_LIBS ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 ++$as_echo "yes" >&6; } ++ ++fi ++ ++ ++ ++ ++@%:@ Check whether --with-dcb was given. ++if test "${with_dcb+set}" = set; then : ++ withval=$with_dcb; ++else ++ with_dcb=yes ++fi ++ ++ ++ if test "X$with_dcb" != Xno; then ++ WITH_DCB_TRUE= ++ WITH_DCB_FALSE='#' ++else ++ WITH_DCB_TRUE='#' ++ WITH_DCB_FALSE= ++fi ++ ++ ++if test "X$with_dcb" != Xno; then : ++ ++pkg_failed=no ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for DCBD" >&5 ++$as_echo_n "checking for DCBD... " >&6; } ++ ++if test -n "$DCBD_CFLAGS"; then ++ pkg_cv_DCBD_CFLAGS="$DCBD_CFLAGS" ++ elif test -n "$PKG_CONFIG"; then ++ if test -n "$PKG_CONFIG" && \ ++ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"dcbd\""; } >&5 ++ ($PKG_CONFIG --exists --print-errors "dcbd") 2>&5 ++ ac_status=$? ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; }; then ++ pkg_cv_DCBD_CFLAGS=`$PKG_CONFIG --cflags "dcbd" 2>/dev/null` ++ test "x$?" != "x0" && pkg_failed=yes ++else ++ pkg_failed=yes ++fi ++ else ++ pkg_failed=untried ++fi ++if test -n "$DCBD_LIBS"; then ++ pkg_cv_DCBD_LIBS="$DCBD_LIBS" ++ elif test -n "$PKG_CONFIG"; then ++ if test -n "$PKG_CONFIG" && \ ++ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"dcbd\""; } >&5 ++ ($PKG_CONFIG --exists --print-errors "dcbd") 2>&5 ++ ac_status=$? ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; }; then ++ pkg_cv_DCBD_LIBS=`$PKG_CONFIG --libs "dcbd" 2>/dev/null` ++ test "x$?" != "x0" && pkg_failed=yes ++else ++ pkg_failed=yes ++fi ++ else ++ pkg_failed=untried ++fi ++ ++ ++ ++if test $pkg_failed = yes; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } ++ ++if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then ++ _pkg_short_errors_supported=yes ++else ++ _pkg_short_errors_supported=no ++fi ++ if test $_pkg_short_errors_supported = yes; then ++ DCBD_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "dcbd" 2>&1` ++ else ++ DCBD_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "dcbd" 2>&1` ++ fi ++ # Put the nasty error message in config.log where it belongs ++ echo "$DCBD_PKG_ERRORS" >&5 ++ ++ as_fn_error $? "Package requirements (dcbd) were not met: ++ ++$DCBD_PKG_ERRORS ++ ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. ++ ++Alternatively, you may set the environment variables DCBD_CFLAGS ++and DCBD_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details." "$LINENO" 5 ++elif test $pkg_failed = untried; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } ++ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 ++$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} ++as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. ++ ++Alternatively, you may set the environment variables DCBD_CFLAGS ++and DCBD_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++ ++To get pkg-config, see . ++See \`config.log' for more details" "$LINENO" 5; } ++else ++ DCBD_CFLAGS=$pkg_cv_DCBD_CFLAGS ++ DCBD_LIBS=$pkg_cv_DCBD_LIBS ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 ++$as_echo "yes" >&6; } ++ ++fi ++ ++fi ++ ++ac_config_files="$ac_config_files Makefile fcoeplumb fcoe-utils.spec fcoe_utils.h" ++ ++cat >confcache <<\_ACEOF ++# This file is a shell script that caches the results of configure ++# tests run on this system so they can be shared between configure ++# scripts and configure runs, see configure's option --config-cache. ++# It is not useful on other systems. If it contains results you don't ++# want to keep, you may remove or edit it. ++# ++# config.status only pays attention to the cache file if you give it ++# the --recheck option to rerun configure. ++# ++# `ac_cv_env_foo' variables (set or unset) will be overridden when ++# loading this file, other *unset* `ac_cv_foo' will be assigned the ++# following values. ++ ++_ACEOF ++ ++# The following way of writing the cache mishandles newlines in values, ++# but we know of no workaround that is simple, portable, and efficient. ++# So, we kill variables containing newlines. ++# Ultrix sh set writes to stderr and can't be redirected directly, ++# and sets the high bit in the cache file unless we assign to the vars. ++( ++ for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do ++ eval ac_val=\$$ac_var ++ case $ac_val in #( ++ *${as_nl}*) ++ case $ac_var in #( ++ *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 ++$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; ++ esac ++ case $ac_var in #( ++ _ | IFS | as_nl) ;; #( ++ BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( ++ *) { eval $ac_var=; unset $ac_var;} ;; ++ esac ;; ++ esac ++ done ++ ++ (set) 2>&1 | ++ case $as_nl`(ac_space=' '; set) 2>&1` in #( ++ *${as_nl}ac_space=\ *) ++ # `set' does not quote correctly, so add quotes: double-quote ++ # substitution turns \\\\ into \\, and sed turns \\ into \. ++ sed -n \ ++ "s/'/'\\\\''/g; ++ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" ++ ;; #( ++ *) ++ # `set' quotes correctly as required by POSIX, so do not add quotes. ++ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" ++ ;; ++ esac | ++ sort ++) | ++ sed ' ++ /^ac_cv_env_/b end ++ t clear ++ :clear ++ s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ ++ t end ++ s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ ++ :end' >>confcache ++if diff "$cache_file" confcache >/dev/null 2>&1; then :; else ++ if test -w "$cache_file"; then ++ if test "x$cache_file" != "x/dev/null"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5 ++$as_echo "$as_me: updating cache $cache_file" >&6;} ++ if test ! -f "$cache_file" || test -h "$cache_file"; then ++ cat confcache >"$cache_file" ++ else ++ case $cache_file in #( ++ */* | ?:*) ++ mv -f confcache "$cache_file"$$ && ++ mv -f "$cache_file"$$ "$cache_file" ;; #( ++ *) ++ mv -f confcache "$cache_file" ;; ++ esac ++ fi ++ fi ++ else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5 ++$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;} ++ fi ++fi ++rm -f confcache ++ ++test "x$prefix" = xNONE && prefix=$ac_default_prefix ++# Let make expand exec_prefix. ++test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' ++ ++# Transform confdefs.h into DEFS. ++# Protect against shell expansion while executing Makefile rules. ++# Protect against Makefile macro expansion. ++# ++# If the first sed substitution is executed (which looks for macros that ++# take arguments), then branch to the quote section. Otherwise, ++# look for a macro that doesn't take arguments. ++ac_script=' ++:mline ++/\\$/{ ++ N ++ s,\\\n,, ++ b mline ++} ++t clear ++:clear ++s/^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\)/-D\1=\2/g ++t quote ++s/^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)/-D\1=\2/g ++t quote ++b any ++:quote ++s/[ `~#$^&*(){}\\|;'\''"<>?]/\\&/g ++s/\[/\\&/g ++s/\]/\\&/g ++s/\$/$$/g ++H ++:any ++${ ++ g ++ s/^\n// ++ s/\n/ /g ++ p ++} ++' ++DEFS=`sed -n "$ac_script" confdefs.h` ++ ++ ++ac_libobjs= ++ac_ltlibobjs= ++U= ++for ac_i in : $LIB@&t@OBJS; do test "x$ac_i" = x: && continue ++ # 1. Remove the extension, and $U if already installed. ++ ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' ++ ac_i=`$as_echo "$ac_i" | sed "$ac_script"` ++ # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR ++ # will be set to the directory where LIBOBJS objects are built. ++ as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext" ++ as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo' ++done ++LIB@&t@OBJS=$ac_libobjs ++ ++LTLIBOBJS=$ac_ltlibobjs ++ ++ ++ if test -n "$EXEEXT"; then ++ am__EXEEXT_TRUE= ++ am__EXEEXT_FALSE='#' ++else ++ am__EXEEXT_TRUE='#' ++ am__EXEEXT_FALSE= ++fi ++ ++if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then ++ as_fn_error $? "conditional \"AMDEP\" was never defined. ++Usually this means the macro was only invoked conditionally." "$LINENO" 5 ++fi ++if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then ++ as_fn_error $? "conditional \"am__fastdepCC\" was never defined. ++Usually this means the macro was only invoked conditionally." "$LINENO" 5 ++fi ++if test -z "${WITH_DCB_TRUE}" && test -z "${WITH_DCB_FALSE}"; then ++ as_fn_error $? "conditional \"WITH_DCB\" was never defined. ++Usually this means the macro was only invoked conditionally." "$LINENO" 5 ++fi ++ ++: "${CONFIG_STATUS=./config.status}" ++ac_write_fail=0 ++ac_clean_files_save=$ac_clean_files ++ac_clean_files="$ac_clean_files $CONFIG_STATUS" ++{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5 ++$as_echo "$as_me: creating $CONFIG_STATUS" >&6;} ++as_write_fail=0 ++cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1 ++#! $SHELL ++# Generated by $as_me. ++# Run this file to recreate the current configuration. ++# Compiler output produced by configure, useful for debugging ++# configure, is in config.log if it exists. ++ ++debug=false ++ac_cs_recheck=false ++ac_cs_silent=false ++ ++SHELL=\${CONFIG_SHELL-$SHELL} ++export SHELL ++_ASEOF ++cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1 ++## -------------------- ## ++## M4sh Initialization. ## ++## -------------------- ## ++ ++# Be more Bourne compatible ++DUALCASE=1; export DUALCASE # for MKS sh ++if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : ++ emulate sh ++ NULLCMD=: ++ # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which ++ # is contrary to our usage. Disable this feature. ++ alias -g '${1+"$@"}'='"$@"' ++ setopt NO_GLOB_SUBST ++else ++ case `(set -o) 2>/dev/null` in @%:@( ++ *posix*) : ++ set -o posix ;; @%:@( ++ *) : ++ ;; ++esac ++fi ++ ++ ++as_nl=' ++' ++export as_nl ++# Printing a long string crashes Solaris 7 /usr/bin/printf. ++as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' ++as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo ++as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo ++# Prefer a ksh shell builtin over an external printf program on Solaris, ++# but without wasting forks for bash or zsh. ++if test -z "$BASH_VERSION$ZSH_VERSION" \ ++ && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then ++ as_echo='print -r --' ++ as_echo_n='print -rn --' ++elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then ++ as_echo='printf %s\n' ++ as_echo_n='printf %s' ++else ++ if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then ++ as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' ++ as_echo_n='/usr/ucb/echo -n' ++ else ++ as_echo_body='eval expr "X$1" : "X\\(.*\\)"' ++ as_echo_n_body='eval ++ arg=$1; ++ case $arg in @%:@( ++ *"$as_nl"*) ++ expr "X$arg" : "X\\(.*\\)$as_nl"; ++ arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; ++ esac; ++ expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" ++ ' ++ export as_echo_n_body ++ as_echo_n='sh -c $as_echo_n_body as_echo' ++ fi ++ export as_echo_body ++ as_echo='sh -c $as_echo_body as_echo' ++fi ++ ++# The user is always right. ++if test "${PATH_SEPARATOR+set}" != set; then ++ PATH_SEPARATOR=: ++ (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { ++ (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || ++ PATH_SEPARATOR=';' ++ } ++fi ++ ++ ++# IFS ++# We need space, tab and new line, in precisely that order. Quoting is ++# there to prevent editors from complaining about space-tab. ++# (If _AS_PATH_WALK were called with IFS unset, it would disable word ++# splitting by setting IFS to empty value.) ++IFS=" "" $as_nl" ++ ++# Find who we are. Look in the path if we contain no directory separator. ++as_myself= ++case $0 in @%:@(( ++ *[\\/]* ) as_myself=$0 ;; ++ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break ++ done ++IFS=$as_save_IFS ++ ++ ;; ++esac ++# We did not find ourselves, most probably we were run as `sh COMMAND' ++# in which case we are not to be found in the path. ++if test "x$as_myself" = x; then ++ as_myself=$0 ++fi ++if test ! -f "$as_myself"; then ++ $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 ++ exit 1 ++fi ++ ++# Unset variables that we do not need and which cause bugs (e.g. in ++# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" ++# suppresses any "Segmentation fault" message there. '((' could ++# trigger a bug in pdksh 5.2.14. ++for as_var in BASH_ENV ENV MAIL MAILPATH ++do eval test x\${$as_var+set} = xset \ ++ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : ++done ++PS1='$ ' ++PS2='> ' ++PS4='+ ' ++ ++# NLS nuisances. ++LC_ALL=C ++export LC_ALL ++LANGUAGE=C ++export LANGUAGE ++ ++# CDPATH. ++(unset CDPATH) >/dev/null 2>&1 && unset CDPATH ++ ++ ++@%:@ as_fn_error STATUS ERROR [LINENO LOG_FD] ++@%:@ ---------------------------------------- ++@%:@ Output "`basename @S|@0`: error: ERROR" to stderr. If LINENO and LOG_FD are ++@%:@ provided, also output the error to LOG_FD, referencing LINENO. Then exit the ++@%:@ script with STATUS, using 1 if that was 0. ++as_fn_error () ++{ ++ as_status=$1; test $as_status -eq 0 && as_status=1 ++ if test "$4"; then ++ as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack ++ $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 ++ fi ++ $as_echo "$as_me: error: $2" >&2 ++ as_fn_exit $as_status ++} @%:@ as_fn_error ++ ++ ++@%:@ as_fn_set_status STATUS ++@%:@ ----------------------- ++@%:@ Set @S|@? to STATUS, without forking. ++as_fn_set_status () ++{ ++ return $1 ++} @%:@ as_fn_set_status ++ ++@%:@ as_fn_exit STATUS ++@%:@ ----------------- ++@%:@ Exit the shell with STATUS, even in a "trap 0" or "set -e" context. ++as_fn_exit () ++{ ++ set +e ++ as_fn_set_status $1 ++ exit $1 ++} @%:@ as_fn_exit ++ ++@%:@ as_fn_unset VAR ++@%:@ --------------- ++@%:@ Portably unset VAR. ++as_fn_unset () ++{ ++ { eval $1=; unset $1;} ++} ++as_unset=as_fn_unset ++@%:@ as_fn_append VAR VALUE ++@%:@ ---------------------- ++@%:@ Append the text in VALUE to the end of the definition contained in VAR. Take ++@%:@ advantage of any shell optimizations that allow amortized linear growth over ++@%:@ repeated appends, instead of the typical quadratic growth present in naive ++@%:@ implementations. ++if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : ++ eval 'as_fn_append () ++ { ++ eval $1+=\$2 ++ }' ++else ++ as_fn_append () ++ { ++ eval $1=\$$1\$2 ++ } ++fi # as_fn_append ++ ++@%:@ as_fn_arith ARG... ++@%:@ ------------------ ++@%:@ Perform arithmetic evaluation on the ARGs, and store the result in the ++@%:@ global @S|@as_val. Take advantage of shells that can avoid forks. The arguments ++@%:@ must be portable across @S|@(()) and expr. ++if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : ++ eval 'as_fn_arith () ++ { ++ as_val=$(( $* )) ++ }' ++else ++ as_fn_arith () ++ { ++ as_val=`expr "$@" || test $? -eq 1` ++ } ++fi # as_fn_arith ++ ++ ++if expr a : '\(a\)' >/dev/null 2>&1 && ++ test "X`expr 00001 : '.*\(...\)'`" = X001; then ++ as_expr=expr ++else ++ as_expr=false ++fi ++ ++if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then ++ as_basename=basename ++else ++ as_basename=false ++fi ++ ++if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then ++ as_dirname=dirname ++else ++ as_dirname=false ++fi ++ ++as_me=`$as_basename -- "$0" || ++$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ ++ X"$0" : 'X\(//\)$' \| \ ++ X"$0" : 'X\(/\)' \| . 2>/dev/null || ++$as_echo X/"$0" | ++ sed '/^.*\/\([^/][^/]*\)\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\/\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\/\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` ++ ++# Avoid depending upon Character Ranges. ++as_cr_letters='abcdefghijklmnopqrstuvwxyz' ++as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' ++as_cr_Letters=$as_cr_letters$as_cr_LETTERS ++as_cr_digits='0123456789' ++as_cr_alnum=$as_cr_Letters$as_cr_digits ++ ++ECHO_C= ECHO_N= ECHO_T= ++case `echo -n x` in @%:@((((( ++-n*) ++ case `echo 'xy\c'` in ++ *c*) ECHO_T=' ';; # ECHO_T is single tab character. ++ xy) ECHO_C='\c';; ++ *) echo `echo ksh88 bug on AIX 6.1` > /dev/null ++ ECHO_T=' ';; ++ esac;; ++*) ++ ECHO_N='-n';; ++esac ++ ++rm -f conf$$ conf$$.exe conf$$.file ++if test -d conf$$.dir; then ++ rm -f conf$$.dir/conf$$.file ++else ++ rm -f conf$$.dir ++ mkdir conf$$.dir 2>/dev/null ++fi ++if (echo >conf$$.file) 2>/dev/null; then ++ if ln -s conf$$.file conf$$ 2>/dev/null; then ++ as_ln_s='ln -s' ++ # ... but there are two gotchas: ++ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. ++ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. ++ # In both cases, we have to default to `cp -p'. ++ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || ++ as_ln_s='cp -p' ++ elif ln conf$$.file conf$$ 2>/dev/null; then ++ as_ln_s=ln ++ else ++ as_ln_s='cp -p' ++ fi ++else ++ as_ln_s='cp -p' ++fi ++rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file ++rmdir conf$$.dir 2>/dev/null ++ ++ ++@%:@ as_fn_mkdir_p ++@%:@ ------------- ++@%:@ Create "@S|@as_dir" as a directory, including parents if necessary. ++as_fn_mkdir_p () ++{ ++ ++ case $as_dir in #( ++ -*) as_dir=./$as_dir;; ++ esac ++ test -d "$as_dir" || eval $as_mkdir_p || { ++ as_dirs= ++ while :; do ++ case $as_dir in #( ++ *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( ++ *) as_qdir=$as_dir;; ++ esac ++ as_dirs="'$as_qdir' $as_dirs" ++ as_dir=`$as_dirname -- "$as_dir" || ++$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ ++ X"$as_dir" : 'X\(//\)[^/]' \| \ ++ X"$as_dir" : 'X\(//\)$' \| \ ++ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || ++$as_echo X"$as_dir" | ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)[^/].*/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` ++ test -d "$as_dir" && break ++ done ++ test -z "$as_dirs" || eval "mkdir $as_dirs" ++ } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" ++ ++ ++} @%:@ as_fn_mkdir_p ++if mkdir -p . 2>/dev/null; then ++ as_mkdir_p='mkdir -p "$as_dir"' ++else ++ test -d ./-p && rmdir ./-p ++ as_mkdir_p=false ++fi ++ ++if test -x / >/dev/null 2>&1; then ++ as_test_x='test -x' ++else ++ if ls -dL / >/dev/null 2>&1; then ++ as_ls_L_option=L ++ else ++ as_ls_L_option= ++ fi ++ as_test_x=' ++ eval sh -c '\'' ++ if test -d "$1"; then ++ test -d "$1/."; ++ else ++ case $1 in @%:@( ++ -*)set "./$1";; ++ esac; ++ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in @%:@(( ++ ???[sx]*):;;*)false;;esac;fi ++ '\'' sh ++ ' ++fi ++as_executable_p=$as_test_x ++ ++# Sed expression to map a string onto a valid CPP name. ++as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" ++ ++# Sed expression to map a string onto a valid variable name. ++as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" ++ ++ ++exec 6>&1 ++## ----------------------------------- ## ++## Main body of $CONFIG_STATUS script. ## ++## ----------------------------------- ## ++_ASEOF ++test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1 ++ ++cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 ++# Save the log message, to keep $0 and so on meaningful, and to ++# report actual input values of CONFIG_FILES etc. instead of their ++# values after options handling. ++ac_log=" ++This file was extended by fcoe-utils $as_me 1.0.9, which was ++generated by GNU Autoconf 2.68. Invocation command line was ++ ++ CONFIG_FILES = $CONFIG_FILES ++ CONFIG_HEADERS = $CONFIG_HEADERS ++ CONFIG_LINKS = $CONFIG_LINKS ++ CONFIG_COMMANDS = $CONFIG_COMMANDS ++ $ $0 $@ ++ ++on `(hostname || uname -n) 2>/dev/null | sed 1q` ++" ++ ++_ACEOF ++ ++case $ac_config_files in *" ++"*) set x $ac_config_files; shift; ac_config_files=$*;; ++esac ++ ++ ++ ++cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ++# Files that config.status was made for. ++config_files="$ac_config_files" ++config_commands="$ac_config_commands" ++ ++_ACEOF ++ ++cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 ++ac_cs_usage="\ ++\`$as_me' instantiates files and other configuration actions ++from templates according to the current configuration. Unless the files ++and actions are specified as TAGs, all are instantiated by default. ++ ++Usage: $0 [OPTION]... [TAG]... ++ ++ -h, --help print this help, then exit ++ -V, --version print version number and configuration settings, then exit ++ --config print configuration, then exit ++ -q, --quiet, --silent ++ do not print progress messages ++ -d, --debug don't remove temporary files ++ --recheck update $as_me by reconfiguring in the same conditions ++ --file=FILE[:TEMPLATE] ++ instantiate the configuration file FILE ++ ++Configuration files: ++$config_files ++ ++Configuration commands: ++$config_commands ++ ++Report bugs to ." ++ ++_ACEOF ++cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ++ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" ++ac_cs_version="\\ ++fcoe-utils config.status 1.0.9 ++configured by $0, generated by GNU Autoconf 2.68, ++ with options \\"\$ac_cs_config\\" ++ ++Copyright (C) 2010 Free Software Foundation, Inc. ++This config.status script is free software; the Free Software Foundation ++gives unlimited permission to copy, distribute and modify it." ++ ++ac_pwd='$ac_pwd' ++srcdir='$srcdir' ++INSTALL='$INSTALL' ++MKDIR_P='$MKDIR_P' ++AWK='$AWK' ++test -n "\$AWK" || AWK=awk ++_ACEOF ++ ++cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 ++# The default lists apply if the user does not specify any file. ++ac_need_defaults=: ++while test $# != 0 ++do ++ case $1 in ++ --*=?*) ++ ac_option=`expr "X$1" : 'X\([^=]*\)='` ++ ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` ++ ac_shift=: ++ ;; ++ --*=) ++ ac_option=`expr "X$1" : 'X\([^=]*\)='` ++ ac_optarg= ++ ac_shift=: ++ ;; ++ *) ++ ac_option=$1 ++ ac_optarg=$2 ++ ac_shift=shift ++ ;; ++ esac ++ ++ case $ac_option in ++ # Handling of the options. ++ -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) ++ ac_cs_recheck=: ;; ++ --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) ++ $as_echo "$ac_cs_version"; exit ;; ++ --config | --confi | --conf | --con | --co | --c ) ++ $as_echo "$ac_cs_config"; exit ;; ++ --debug | --debu | --deb | --de | --d | -d ) ++ debug=: ;; ++ --file | --fil | --fi | --f ) ++ $ac_shift ++ case $ac_optarg in ++ *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; ++ '') as_fn_error $? "missing file argument" ;; ++ esac ++ as_fn_append CONFIG_FILES " '$ac_optarg'" ++ ac_need_defaults=false;; ++ --he | --h | --help | --hel | -h ) ++ $as_echo "$ac_cs_usage"; exit ;; ++ -q | -quiet | --quiet | --quie | --qui | --qu | --q \ ++ | -silent | --silent | --silen | --sile | --sil | --si | --s) ++ ac_cs_silent=: ;; ++ ++ # This is an error. ++ -*) as_fn_error $? "unrecognized option: \`$1' ++Try \`$0 --help' for more information." ;; ++ ++ *) as_fn_append ac_config_targets " $1" ++ ac_need_defaults=false ;; ++ ++ esac ++ shift ++done ++ ++ac_configure_extra_args= ++ ++if $ac_cs_silent; then ++ exec 6>/dev/null ++ ac_configure_extra_args="$ac_configure_extra_args --silent" ++fi ++ ++_ACEOF ++cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ++if \$ac_cs_recheck; then ++ set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion ++ shift ++ \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6 ++ CONFIG_SHELL='$SHELL' ++ export CONFIG_SHELL ++ exec "\$@" ++fi ++ ++_ACEOF ++cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 ++exec 5>>config.log ++{ ++ echo ++ sed 'h;s/./-/g;s/^.../@%:@@%:@ /;s/...$/ @%:@@%:@/;p;x;p;x' <<_ASBOX ++@%:@@%:@ Running $as_me. @%:@@%:@ ++_ASBOX ++ $as_echo "$ac_log" ++} >&5 ++ ++_ACEOF ++cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ++# ++# INIT-COMMANDS ++# ++AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" ++ ++_ACEOF ++ ++cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 ++ ++# Handling of arguments. ++for ac_config_target in $ac_config_targets ++do ++ case $ac_config_target in ++ "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; ++ "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; ++ "fcoeplumb") CONFIG_FILES="$CONFIG_FILES fcoeplumb" ;; ++ "fcoe-utils.spec") CONFIG_FILES="$CONFIG_FILES fcoe-utils.spec" ;; ++ "fcoe_utils.h") CONFIG_FILES="$CONFIG_FILES fcoe_utils.h" ;; ++ ++ *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;; ++ esac ++done ++ ++ ++# If the user did not use the arguments to specify the items to instantiate, ++# then the envvar interface is used. Set only those that are not. ++# We use the long form for the default assignment because of an extremely ++# bizarre bug on SunOS 4.1.3. ++if $ac_need_defaults; then ++ test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files ++ test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands ++fi ++ ++# Have a temporary directory for convenience. Make it in the build tree ++# simply because there is no reason against having it here, and in addition, ++# creating and moving files from /tmp can sometimes cause problems. ++# Hook for its removal unless debugging. ++# Note that there is a small window in which the directory will not be cleaned: ++# after its creation but before its name has been assigned to `$tmp'. ++$debug || ++{ ++ tmp= ac_tmp= ++ trap 'exit_status=$? ++ : "${ac_tmp:=$tmp}" ++ { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status ++' 0 ++ trap 'as_fn_exit 1' 1 2 13 15 ++} ++# Create a (secure) tmp directory for tmp files. ++ ++{ ++ tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && ++ test -d "$tmp" ++} || ++{ ++ tmp=./conf$$-$RANDOM ++ (umask 077 && mkdir "$tmp") ++} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5 ++ac_tmp=$tmp ++ ++# Set up the scripts for CONFIG_FILES section. ++# No need to generate them if there are no CONFIG_FILES. ++# This happens for instance with `./config.status config.h'. ++if test -n "$CONFIG_FILES"; then ++ ++ ++ac_cr=`echo X | tr X '\015'` ++# On cygwin, bash can eat \r inside `` if the user requested igncr. ++# But we know of no other shell where ac_cr would be empty at this ++# point, so we can use a bashism as a fallback. ++if test "x$ac_cr" = x; then ++ eval ac_cr=\$\'\\r\' ++fi ++ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null` ++if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then ++ ac_cs_awk_cr='\\r' ++else ++ ac_cs_awk_cr=$ac_cr ++fi ++ ++echo 'BEGIN {' >"$ac_tmp/subs1.awk" && ++_ACEOF ++ ++ ++{ ++ echo "cat >conf$$subs.awk <<_ACEOF" && ++ echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && ++ echo "_ACEOF" ++} >conf$$subs.sh || ++ as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 ++ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'` ++ac_delim='%!_!# ' ++for ac_last_try in false false false false false :; do ++ . ./conf$$subs.sh || ++ as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 ++ ++ ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` ++ if test $ac_delim_n = $ac_delim_num; then ++ break ++ elif $ac_last_try; then ++ as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 ++ else ++ ac_delim="$ac_delim!$ac_delim _$ac_delim!! " ++ fi ++done ++rm -f conf$$subs.sh ++ ++cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ++cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK && ++_ACEOF ++sed -n ' ++h ++s/^/S["/; s/!.*/"]=/ ++p ++g ++s/^[^!]*!// ++:repl ++t repl ++s/'"$ac_delim"'$// ++t delim ++:nl ++h ++s/\(.\{148\}\)..*/\1/ ++t more1 ++s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/ ++p ++n ++b repl ++:more1 ++s/["\\]/\\&/g; s/^/"/; s/$/"\\/ ++p ++g ++s/.\{148\}// ++t nl ++:delim ++h ++s/\(.\{148\}\)..*/\1/ ++t more2 ++s/["\\]/\\&/g; s/^/"/; s/$/"/ ++p ++b ++:more2 ++s/["\\]/\\&/g; s/^/"/; s/$/"\\/ ++p ++g ++s/.\{148\}// ++t delim ++' >$CONFIG_STATUS || ac_write_fail=1 ++rm -f conf$$subs.awk ++cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ++_ACAWK ++cat >>"\$ac_tmp/subs1.awk" <<_ACAWK && ++ for (key in S) S_is_set[key] = 1 ++ FS = "" ++ ++} ++{ ++ line = $ 0 ++ nfields = split(line, field, "@") ++ substed = 0 ++ len = length(field[1]) ++ for (i = 2; i < nfields; i++) { ++ key = field[i] ++ keylen = length(key) ++ if (S_is_set[key]) { ++ value = S[key] ++ line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3) ++ len += length(value) + length(field[++i]) ++ substed = 1 ++ } else ++ len += 1 + keylen ++ } ++ ++ print line ++} ++ ++_ACAWK ++_ACEOF ++cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 ++if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then ++ sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" ++else ++ cat ++fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \ ++ || as_fn_error $? "could not setup config files machinery" "$LINENO" 5 ++_ACEOF ++ ++# VPATH may cause trouble with some makes, so we remove sole $(srcdir), ++# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and ++# trailing colons and then remove the whole line if VPATH becomes empty ++# (actually we leave an empty line to preserve line numbers). ++if test "x$srcdir" = x.; then ++ ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{ ++h ++s/// ++s/^/:/ ++s/[ ]*$/:/ ++s/:\$(srcdir):/:/g ++s/:\${srcdir}:/:/g ++s/:@srcdir@:/:/g ++s/^:*// ++s/:*$// ++x ++s/\(=[ ]*\).*/\1/ ++G ++s/\n// ++s/^[^=]*=[ ]*$// ++}' ++fi ++ ++cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 ++fi # test -n "$CONFIG_FILES" ++ ++ ++eval set X " :F $CONFIG_FILES :C $CONFIG_COMMANDS" ++shift ++for ac_tag ++do ++ case $ac_tag in ++ :[FHLC]) ac_mode=$ac_tag; continue;; ++ esac ++ case $ac_mode$ac_tag in ++ :[FHL]*:*);; ++ :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;; ++ :[FH]-) ac_tag=-:-;; ++ :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; ++ esac ++ ac_save_IFS=$IFS ++ IFS=: ++ set x $ac_tag ++ IFS=$ac_save_IFS ++ shift ++ ac_file=$1 ++ shift ++ ++ case $ac_mode in ++ :L) ac_source=$1;; ++ :[FH]) ++ ac_file_inputs= ++ for ac_f ++ do ++ case $ac_f in ++ -) ac_f="$ac_tmp/stdin";; ++ *) # Look for the file first in the build tree, then in the source tree ++ # (if the path is not absolute). The absolute path cannot be DOS-style, ++ # because $ac_f cannot contain `:'. ++ test -f "$ac_f" || ++ case $ac_f in ++ [\\/$]*) false;; ++ *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; ++ esac || ++ as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;; ++ esac ++ case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac ++ as_fn_append ac_file_inputs " '$ac_f'" ++ done ++ ++ # Let's still pretend it is `configure' which instantiates (i.e., don't ++ # use $as_me), people would be surprised to read: ++ # /* config.h. Generated by config.status. */ ++ configure_input='Generated from '` ++ $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g' ++ `' by configure.' ++ if test x"$ac_file" != x-; then ++ configure_input="$ac_file. $configure_input" ++ { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5 ++$as_echo "$as_me: creating $ac_file" >&6;} ++ fi ++ # Neutralize special characters interpreted by sed in replacement strings. ++ case $configure_input in #( ++ *\&* | *\|* | *\\* ) ++ ac_sed_conf_input=`$as_echo "$configure_input" | ++ sed 's/[\\\\&|]/\\\\&/g'`;; #( ++ *) ac_sed_conf_input=$configure_input;; ++ esac ++ ++ case $ac_tag in ++ *:-:* | *:-) cat >"$ac_tmp/stdin" \ ++ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; ++ esac ++ ;; ++ esac ++ ++ ac_dir=`$as_dirname -- "$ac_file" || ++$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ ++ X"$ac_file" : 'X\(//\)[^/]' \| \ ++ X"$ac_file" : 'X\(//\)$' \| \ ++ X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || ++$as_echo X"$ac_file" | ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)[^/].*/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` ++ as_dir="$ac_dir"; as_fn_mkdir_p ++ ac_builddir=. ++ ++case "$ac_dir" in ++.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; ++*) ++ ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` ++ # A ".." for each directory in $ac_dir_suffix. ++ ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` ++ case $ac_top_builddir_sub in ++ "") ac_top_builddir_sub=. ac_top_build_prefix= ;; ++ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; ++ esac ;; ++esac ++ac_abs_top_builddir=$ac_pwd ++ac_abs_builddir=$ac_pwd$ac_dir_suffix ++# for backward compatibility: ++ac_top_builddir=$ac_top_build_prefix ++ ++case $srcdir in ++ .) # We are building in place. ++ ac_srcdir=. ++ ac_top_srcdir=$ac_top_builddir_sub ++ ac_abs_top_srcdir=$ac_pwd ;; ++ [\\/]* | ?:[\\/]* ) # Absolute name. ++ ac_srcdir=$srcdir$ac_dir_suffix; ++ ac_top_srcdir=$srcdir ++ ac_abs_top_srcdir=$srcdir ;; ++ *) # Relative name. ++ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix ++ ac_top_srcdir=$ac_top_build_prefix$srcdir ++ ac_abs_top_srcdir=$ac_pwd/$srcdir ;; ++esac ++ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix ++ ++ ++ case $ac_mode in ++ :F) ++ # ++ # CONFIG_FILE ++ # ++ ++ case $INSTALL in ++ [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; ++ *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; ++ esac ++ ac_MKDIR_P=$MKDIR_P ++ case $MKDIR_P in ++ [\\/$]* | ?:[\\/]* ) ;; ++ */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;; ++ esac ++_ACEOF ++ ++cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 ++# If the template does not know about datarootdir, expand it. ++# FIXME: This hack should be removed a few years after 2.60. ++ac_datarootdir_hack=; ac_datarootdir_seen= ++ac_sed_dataroot=' ++/datarootdir/ { ++ p ++ q ++} ++/@datadir@/p ++/@docdir@/p ++/@infodir@/p ++/@localedir@/p ++/@mandir@/p' ++case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in ++*datarootdir*) ac_datarootdir_seen=yes;; ++*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) ++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 ++$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} ++_ACEOF ++cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ++ ac_datarootdir_hack=' ++ s&@datadir@&$datadir&g ++ s&@docdir@&$docdir&g ++ s&@infodir@&$infodir&g ++ s&@localedir@&$localedir&g ++ s&@mandir@&$mandir&g ++ s&\\\${datarootdir}&$datarootdir&g' ;; ++esac ++_ACEOF ++ ++# Neutralize VPATH when `$srcdir' = `.'. ++# Shell code in configure.ac might set extrasub. ++# FIXME: do we really want to maintain this feature? ++cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ++ac_sed_extra="$ac_vpsub ++$extrasub ++_ACEOF ++cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 ++:t ++/@[a-zA-Z_][a-zA-Z_0-9]*@/!b ++s|@configure_input@|$ac_sed_conf_input|;t t ++s&@top_builddir@&$ac_top_builddir_sub&;t t ++s&@top_build_prefix@&$ac_top_build_prefix&;t t ++s&@srcdir@&$ac_srcdir&;t t ++s&@abs_srcdir@&$ac_abs_srcdir&;t t ++s&@top_srcdir@&$ac_top_srcdir&;t t ++s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t ++s&@builddir@&$ac_builddir&;t t ++s&@abs_builddir@&$ac_abs_builddir&;t t ++s&@abs_top_builddir@&$ac_abs_top_builddir&;t t ++s&@INSTALL@&$ac_INSTALL&;t t ++s&@MKDIR_P@&$ac_MKDIR_P&;t t ++$ac_datarootdir_hack ++" ++eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \ ++ >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ++ ++test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && ++ { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } && ++ { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \ ++ "$ac_tmp/out"`; test -z "$ac_out"; } && ++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir' ++which seems to be undefined. Please make sure it is defined" >&5 ++$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' ++which seems to be undefined. Please make sure it is defined" >&2;} ++ ++ rm -f "$ac_tmp/stdin" ++ case $ac_file in ++ -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";; ++ *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";; ++ esac \ ++ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ++ ;; ++ ++ ++ :C) { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5 ++$as_echo "$as_me: executing $ac_file commands" >&6;} ++ ;; ++ esac ++ ++ ++ case $ac_file$ac_mode in ++ "depfiles":C) test x"$AMDEP_TRUE" != x"" || { ++ # Autoconf 2.62 quotes --file arguments for eval, but not when files ++ # are listed without --file. Let's play safe and only enable the eval ++ # if we detect the quoting. ++ case $CONFIG_FILES in ++ *\'*) eval set x "$CONFIG_FILES" ;; ++ *) set x $CONFIG_FILES ;; ++ esac ++ shift ++ for mf ++ do ++ # Strip MF so we end up with the name of the file. ++ mf=`echo "$mf" | sed -e 's/:.*$//'` ++ # Check whether this is an Automake generated Makefile or not. ++ # We used to match only the files named `Makefile.in', but ++ # some people rename them; so instead we look at the file content. ++ # Grep'ing the first line is not enough: some people post-process ++ # each Makefile.in and add a new line on top of each file to say so. ++ # Grep'ing the whole file is not good either: AIX grep has a line ++ # limit of 2048, but all sed's we know have understand at least 4000. ++ if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then ++ dirpart=`$as_dirname -- "$mf" || ++$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ ++ X"$mf" : 'X\(//\)[^/]' \| \ ++ X"$mf" : 'X\(//\)$' \| \ ++ X"$mf" : 'X\(/\)' \| . 2>/dev/null || ++$as_echo X"$mf" | ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)[^/].*/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` ++ else ++ continue ++ fi ++ # Extract the definition of DEPDIR, am__include, and am__quote ++ # from the Makefile without running `make'. ++ DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` ++ test -z "$DEPDIR" && continue ++ am__include=`sed -n 's/^am__include = //p' < "$mf"` ++ test -z "am__include" && continue ++ am__quote=`sed -n 's/^am__quote = //p' < "$mf"` ++ # When using ansi2knr, U may be empty or an underscore; expand it ++ U=`sed -n 's/^U = //p' < "$mf"` ++ # Find all dependency output files, they are included files with ++ # $(DEPDIR) in their names. We invoke sed twice because it is the ++ # simplest approach to changing $(DEPDIR) to its actual value in the ++ # expansion. ++ for file in `sed -n " ++ s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ ++ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do ++ # Make sure the directory exists. ++ test -f "$dirpart/$file" && continue ++ fdir=`$as_dirname -- "$file" || ++$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ ++ X"$file" : 'X\(//\)[^/]' \| \ ++ X"$file" : 'X\(//\)$' \| \ ++ X"$file" : 'X\(/\)' \| . 2>/dev/null || ++$as_echo X"$file" | ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)[^/].*/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` ++ as_dir=$dirpart/$fdir; as_fn_mkdir_p ++ # echo "creating $dirpart/$file" ++ echo '# dummy' > "$dirpart/$file" ++ done ++ done ++} ++ ;; ++ ++ esac ++done # for ac_tag ++ ++ ++as_fn_exit 0 ++_ACEOF ++ac_clean_files=$ac_clean_files_save ++ ++test $ac_write_fail = 0 || ++ as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5 ++ ++ ++# configure is writing to config.log, and then calls config.status. ++# config.status does its own redirection, appending to config.log. ++# Unfortunately, on DOS this fails, as config.log is still kept open ++# by configure, so config.status won't be able to write to it; its ++# output is simply discarded. So we exec the FD to /dev/null, ++# effectively closing config.log, so it can be properly (re)opened and ++# appended to by config.status. When coming back to configure, we ++# need to make the FD available again. ++if test "$no_create" != yes; then ++ ac_cs_success=: ++ ac_config_status_args= ++ test "$silent" = yes && ++ ac_config_status_args="$ac_config_status_args --quiet" ++ exec 5>/dev/null ++ $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false ++ exec 5>>config.log ++ # Use ||, not &&, to avoid exiting from the if with $? = 1, which ++ # would make configure fail if this is the last instruction. ++ $ac_cs_success || as_fn_exit 1 ++fi ++if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 ++$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;} ++fi ++ ++ +diff -Nur -x '*.orig' -x '*~' fcoe-utils-1.0.9//autom4te.cache/requests fcoe-utils-1.0.9.new//autom4te.cache/requests +--- fcoe-utils-1.0.9//autom4te.cache/requests 1969-12-31 19:00:00.000000000 -0500 ++++ fcoe-utils-1.0.9.new//autom4te.cache/requests 2011-09-14 11:57:05.000000000 -0400 +@@ -0,0 +1,151 @@ ++# This file was generated by Autom4te Sun May 1 09:53:53 UTC 2011. ++# It contains the lists of macros which have been traced. ++# It can be safely removed. ++ ++@request = ( ++ bless( [ ++ '0', ++ 1, ++ [ ++ '/usr/share/autoconf' ++ ], ++ [ ++ '/usr/share/autoconf/autoconf/autoconf.m4f', ++ '/usr/share/aclocal/pkg.m4', ++ '/usr/share/aclocal-1.11/amversion.m4', ++ '/usr/share/aclocal-1.11/auxdir.m4', ++ '/usr/share/aclocal-1.11/cond.m4', ++ '/usr/share/aclocal-1.11/depend.m4', ++ '/usr/share/aclocal-1.11/depout.m4', ++ '/usr/share/aclocal-1.11/init.m4', ++ '/usr/share/aclocal-1.11/install-sh.m4', ++ '/usr/share/aclocal-1.11/lead-dot.m4', ++ '/usr/share/aclocal-1.11/make.m4', ++ '/usr/share/aclocal-1.11/minuso.m4', ++ '/usr/share/aclocal-1.11/missing.m4', ++ '/usr/share/aclocal-1.11/mkdirp.m4', ++ '/usr/share/aclocal-1.11/options.m4', ++ '/usr/share/aclocal-1.11/runlog.m4', ++ '/usr/share/aclocal-1.11/sanity.m4', ++ '/usr/share/aclocal-1.11/silent.m4', ++ '/usr/share/aclocal-1.11/strip.m4', ++ '/usr/share/aclocal-1.11/substnot.m4', ++ '/usr/share/aclocal-1.11/tar.m4', ++ 'configure.ac' ++ ], ++ { ++ 'm4_pattern_forbid' => 1, ++ 'AM_SET_CURRENT_AUTOMAKE_VERSION' => 1, ++ '_AM_SET_OPTION' => 1, ++ 'AC_DEFUN' => 1, ++ 'AM_PROG_MKDIR_P' => 1, ++ 'AM_INIT_AUTOMAKE' => 1, ++ 'AM_AUTOMAKE_VERSION' => 1, ++ 'AM_MISSING_HAS_RUN' => 1, ++ 'AM_SUBST_NOTMAKE' => 1, ++ 'AM_MISSING_PROG' => 1, ++ 'AM_OUTPUT_DEPENDENCY_COMMANDS' => 1, ++ 'AC_DEFUN_ONCE' => 1, ++ 'AM_PROG_INSTALL_STRIP' => 1, ++ '_PKG_SHORT_ERRORS_SUPPORTED' => 1, ++ '_m4_warn' => 1, ++ 'AM_SANITY_CHECK' => 1, ++ 'PKG_CHECK_EXISTS' => 1, ++ 'AM_SILENT_RULES' => 1, ++ 'include' => 1, ++ '_AM_PROG_TAR' => 1, ++ 'AM_AUX_DIR_EXPAND' => 1, ++ 'AM_DEP_TRACK' => 1, ++ '_AM_SET_OPTIONS' => 1, ++ '_AM_OUTPUT_DEPENDENCY_COMMANDS' => 1, ++ 'AM_RUN_LOG' => 1, ++ '_AM_IF_OPTION' => 1, ++ '_AM_SUBST_NOTMAKE' => 1, ++ 'm4_pattern_allow' => 1, ++ '_AM_AUTOCONF_VERSION' => 1, ++ 'AM_PROG_CC_C_O' => 1, ++ '_AM_MANGLE_OPTION' => 1, ++ 'AM_SET_LEADING_DOT' => 1, ++ 'AM_CONDITIONAL' => 1, ++ 'AM_SET_DEPDIR' => 1, ++ '_AM_DEPENDENCIES' => 1, ++ 'AM_PROG_INSTALL_SH' => 1, ++ 'PKG_PROG_PKG_CONFIG' => 1, ++ 'm4_include' => 1, ++ 'PKG_CHECK_MODULES' => 1, ++ '_AC_AM_CONFIG_HEADER_HOOK' => 1, ++ 'AU_DEFUN' => 1, ++ 'AM_MAKE_INCLUDE' => 1 ++ } ++ ], 'Autom4te::Request' ), ++ bless( [ ++ '1', ++ 1, ++ [ ++ '/usr/share/autoconf' ++ ], ++ [ ++ '/usr/share/autoconf/autoconf/autoconf.m4f', ++ 'aclocal.m4', ++ 'configure.ac' ++ ], ++ { ++ '_LT_AC_TAGCONFIG' => 1, ++ 'AM_PROG_F77_C_O' => 1, ++ 'm4_pattern_forbid' => 1, ++ 'AC_INIT' => 1, ++ '_AM_COND_IF' => 1, ++ 'AC_CANONICAL_TARGET' => 1, ++ 'AC_SUBST' => 1, ++ 'AC_CONFIG_LIBOBJ_DIR' => 1, ++ 'AC_FC_SRCEXT' => 1, ++ 'AC_CANONICAL_HOST' => 1, ++ 'AC_PROG_LIBTOOL' => 1, ++ 'AM_INIT_AUTOMAKE' => 1, ++ 'AM_PATH_GUILE' => 1, ++ 'AC_CONFIG_SUBDIRS' => 1, ++ 'AM_AUTOMAKE_VERSION' => 1, ++ 'LT_CONFIG_LTDL_DIR' => 1, ++ 'AC_REQUIRE_AUX_FILE' => 1, ++ 'AC_CONFIG_LINKS' => 1, ++ 'm4_sinclude' => 1, ++ 'LT_SUPPORTED_TAG' => 1, ++ 'AM_MAINTAINER_MODE' => 1, ++ 'AM_NLS' => 1, ++ 'AM_GNU_GETTEXT_INTL_SUBDIR' => 1, ++ 'AM_MAKEFILE_INCLUDE' => 1, ++ '_m4_warn' => 1, ++ 'AM_PROG_CXX_C_O' => 1, ++ '_AM_COND_ENDIF' => 1, ++ '_AM_MAKEFILE_INCLUDE' => 1, ++ 'AM_ENABLE_MULTILIB' => 1, ++ 'AM_SILENT_RULES' => 1, ++ 'AM_PROG_MOC' => 1, ++ 'AC_CONFIG_FILES' => 1, ++ 'LT_INIT' => 1, ++ 'include' => 1, ++ 'AM_PROG_AR' => 1, ++ 'AM_GNU_GETTEXT' => 1, ++ 'AC_LIBSOURCE' => 1, ++ 'AM_PROG_FC_C_O' => 1, ++ 'AC_CANONICAL_BUILD' => 1, ++ 'AC_FC_FREEFORM' => 1, ++ 'AH_OUTPUT' => 1, ++ '_AM_SUBST_NOTMAKE' => 1, ++ 'AC_CONFIG_AUX_DIR' => 1, ++ 'sinclude' => 1, ++ 'AM_PROG_CC_C_O' => 1, ++ 'm4_pattern_allow' => 1, ++ 'AM_XGETTEXT_OPTION' => 1, ++ 'AC_CANONICAL_SYSTEM' => 1, ++ 'AM_CONDITIONAL' => 1, ++ 'AC_CONFIG_HEADERS' => 1, ++ 'AC_DEFINE_TRACE_LITERAL' => 1, ++ 'AM_POT_TOOLS' => 1, ++ 'm4_include' => 1, ++ '_AM_COND_ELSE' => 1, ++ 'AC_SUBST_TRACE' => 1 ++ } ++ ], 'Autom4te::Request' ) ++ ); ++ +diff -Nur -x '*.orig' -x '*~' fcoe-utils-1.0.9//autom4te.cache/traces.0 fcoe-utils-1.0.9.new//autom4te.cache/traces.0 +--- fcoe-utils-1.0.9//autom4te.cache/traces.0 1969-12-31 19:00:00.000000000 -0500 ++++ fcoe-utils-1.0.9.new//autom4te.cache/traces.0 2011-09-14 11:57:04.000000000 -0400 +@@ -0,0 +1,889 @@ ++m4trace:/usr/share/aclocal/pkg.m4:27: -1- AC_DEFUN([PKG_PROG_PKG_CONFIG], [m4_pattern_forbid([^_?PKG_[A-Z_]+$]) ++m4_pattern_allow([^PKG_CONFIG(_(PATH|LIBDIR|SYSROOT_DIR|ALLOW_SYSTEM_(CFLAGS|LIBS)))?$]) ++m4_pattern_allow([^PKG_CONFIG_(DISABLE_UNINSTALLED|TOP_BUILD_DIR|DEBUG_SPEW)$]) ++AC_ARG_VAR([PKG_CONFIG], [path to pkg-config utility]) ++AC_ARG_VAR([PKG_CONFIG_PATH], [directories to add to pkg-config's search path]) ++AC_ARG_VAR([PKG_CONFIG_LIBDIR], [path overriding pkg-config's built-in search path]) ++ ++if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then ++ AC_PATH_TOOL([PKG_CONFIG], [pkg-config]) ++fi ++if test -n "$PKG_CONFIG"; then ++ _pkg_min_version=m4_default([$1], [0.9.0]) ++ AC_MSG_CHECKING([pkg-config is at least version $_pkg_min_version]) ++ if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then ++ AC_MSG_RESULT([yes]) ++ else ++ AC_MSG_RESULT([no]) ++ PKG_CONFIG="" ++ fi ++fi[]dnl ++]) ++m4trace:/usr/share/aclocal/pkg.m4:60: -1- AC_DEFUN([PKG_CHECK_EXISTS], [AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl ++if test -n "$PKG_CONFIG" && \ ++ AC_RUN_LOG([$PKG_CONFIG --exists --print-errors "$1"]); then ++ m4_default([$2], [:]) ++m4_ifvaln([$3], [else ++ $3])dnl ++fi]) ++m4trace:/usr/share/aclocal/pkg.m4:86: -1- AC_DEFUN([_PKG_SHORT_ERRORS_SUPPORTED], [AC_REQUIRE([PKG_PROG_PKG_CONFIG]) ++if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then ++ _pkg_short_errors_supported=yes ++else ++ _pkg_short_errors_supported=no ++fi[]dnl ++]) ++m4trace:/usr/share/aclocal/pkg.m4:106: -1- AC_DEFUN([PKG_CHECK_MODULES], [AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl ++AC_ARG_VAR([$1][_CFLAGS], [C compiler flags for $1, overriding pkg-config])dnl ++AC_ARG_VAR([$1][_LIBS], [linker flags for $1, overriding pkg-config])dnl ++ ++pkg_failed=no ++AC_MSG_CHECKING([for $1]) ++ ++_PKG_CONFIG([$1][_CFLAGS], [cflags], [$2]) ++_PKG_CONFIG([$1][_LIBS], [libs], [$2]) ++ ++m4_define([_PKG_TEXT], [Alternatively, you may set the environment variables $1[]_CFLAGS ++and $1[]_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details.]) ++ ++if test $pkg_failed = yes; then ++ AC_MSG_RESULT([no]) ++ _PKG_SHORT_ERRORS_SUPPORTED ++ if test $_pkg_short_errors_supported = yes; then ++ $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "$2" 2>&1` ++ else ++ $1[]_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "$2" 2>&1` ++ fi ++ # Put the nasty error message in config.log where it belongs ++ echo "$$1[]_PKG_ERRORS" >&AS_MESSAGE_LOG_FD ++ ++ m4_default([$4], [AC_MSG_ERROR( ++[Package requirements ($2) were not met: ++ ++$$1_PKG_ERRORS ++ ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. ++ ++_PKG_TEXT])[]dnl ++ ]) ++elif test $pkg_failed = untried; then ++ AC_MSG_RESULT([no]) ++ m4_default([$4], [AC_MSG_FAILURE( ++[The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. ++ ++_PKG_TEXT ++ ++To get pkg-config, see .])[]dnl ++ ]) ++else ++ $1[]_CFLAGS=$pkg_cv_[]$1[]_CFLAGS ++ $1[]_LIBS=$pkg_cv_[]$1[]_LIBS ++ AC_MSG_RESULT([yes]) ++ $3 ++fi[]dnl ++]) ++m4trace:/usr/share/aclocal-1.11/amversion.m4:14: -1- AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version='1.11' ++dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to ++dnl require some minimum version. Point them to the right macro. ++m4_if([$1], [1.11.1], [], ++ [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl ++]) ++m4trace:/usr/share/aclocal-1.11/amversion.m4:33: -1- AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], [AM_AUTOMAKE_VERSION([1.11.1])dnl ++m4_ifndef([AC_AUTOCONF_VERSION], ++ [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl ++_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))]) ++m4trace:/usr/share/aclocal-1.11/auxdir.m4:47: -1- AC_DEFUN([AM_AUX_DIR_EXPAND], [dnl Rely on autoconf to set up CDPATH properly. ++AC_PREREQ([2.50])dnl ++# expand $ac_aux_dir to an absolute path ++am_aux_dir=`cd $ac_aux_dir && pwd` ++]) ++m4trace:/usr/share/aclocal-1.11/cond.m4:15: -1- AC_DEFUN([AM_CONDITIONAL], [AC_PREREQ(2.52)dnl ++ ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], ++ [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl ++AC_SUBST([$1_TRUE])dnl ++AC_SUBST([$1_FALSE])dnl ++_AM_SUBST_NOTMAKE([$1_TRUE])dnl ++_AM_SUBST_NOTMAKE([$1_FALSE])dnl ++m4_define([_AM_COND_VALUE_$1], [$2])dnl ++if $2; then ++ $1_TRUE= ++ $1_FALSE='#' ++else ++ $1_TRUE='#' ++ $1_FALSE= ++fi ++AC_CONFIG_COMMANDS_PRE( ++[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then ++ AC_MSG_ERROR([[conditional "$1" was never defined. ++Usually this means the macro was only invoked conditionally.]]) ++fi])]) ++m4trace:/usr/share/aclocal-1.11/depend.m4:28: -1- AC_DEFUN([_AM_DEPENDENCIES], [AC_REQUIRE([AM_SET_DEPDIR])dnl ++AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl ++AC_REQUIRE([AM_MAKE_INCLUDE])dnl ++AC_REQUIRE([AM_DEP_TRACK])dnl ++ ++ifelse([$1], CC, [depcc="$CC" am_compiler_list=], ++ [$1], CXX, [depcc="$CXX" am_compiler_list=], ++ [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'], ++ [$1], UPC, [depcc="$UPC" am_compiler_list=], ++ [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'], ++ [depcc="$$1" am_compiler_list=]) ++ ++AC_CACHE_CHECK([dependency style of $depcc], ++ [am_cv_$1_dependencies_compiler_type], ++[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then ++ # We make a subdir and do the tests there. Otherwise we can end up ++ # making bogus files that we don't know about and never remove. For ++ # instance it was reported that on HP-UX the gcc test will end up ++ # making a dummy file named `D' -- because `-MD' means `put the output ++ # in D'. ++ mkdir conftest.dir ++ # Copy depcomp to subdir because otherwise we won't find it if we're ++ # using a relative directory. ++ cp "$am_depcomp" conftest.dir ++ cd conftest.dir ++ # We will build objects and dependencies in a subdirectory because ++ # it helps to detect inapplicable dependency modes. For instance ++ # both Tru64's cc and ICC support -MD to output dependencies as a ++ # side effect of compilation, but ICC will put the dependencies in ++ # the current directory while Tru64 will put them in the object ++ # directory. ++ mkdir sub ++ ++ am_cv_$1_dependencies_compiler_type=none ++ if test "$am_compiler_list" = ""; then ++ am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` ++ fi ++ am__universal=false ++ m4_case([$1], [CC], ++ [case " $depcc " in #( ++ *\ -arch\ *\ -arch\ *) am__universal=true ;; ++ esac], ++ [CXX], ++ [case " $depcc " in #( ++ *\ -arch\ *\ -arch\ *) am__universal=true ;; ++ esac]) ++ ++ for depmode in $am_compiler_list; do ++ # Setup a source with many dependencies, because some compilers ++ # like to wrap large dependency lists on column 80 (with \), and ++ # we should not choose a depcomp mode which is confused by this. ++ # ++ # We need to recreate these files for each test, as the compiler may ++ # overwrite some of them when testing with obscure command lines. ++ # This happens at least with the AIX C compiler. ++ : > sub/conftest.c ++ for i in 1 2 3 4 5 6; do ++ echo '#include "conftst'$i'.h"' >> sub/conftest.c ++ # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with ++ # Solaris 8's {/usr,}/bin/sh. ++ touch sub/conftst$i.h ++ done ++ echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf ++ ++ # We check with `-c' and `-o' for the sake of the "dashmstdout" ++ # mode. It turns out that the SunPro C++ compiler does not properly ++ # handle `-M -o', and we need to detect this. Also, some Intel ++ # versions had trouble with output in subdirs ++ am__obj=sub/conftest.${OBJEXT-o} ++ am__minus_obj="-o $am__obj" ++ case $depmode in ++ gcc) ++ # This depmode causes a compiler race in universal mode. ++ test "$am__universal" = false || continue ++ ;; ++ nosideeffect) ++ # after this tag, mechanisms are not by side-effect, so they'll ++ # only be used when explicitly requested ++ if test "x$enable_dependency_tracking" = xyes; then ++ continue ++ else ++ break ++ fi ++ ;; ++ msvisualcpp | msvcmsys) ++ # This compiler won't grok `-c -o', but also, the minuso test has ++ # not run yet. These depmodes are late enough in the game, and ++ # so weak that their functioning should not be impacted. ++ am__obj=conftest.${OBJEXT-o} ++ am__minus_obj= ++ ;; ++ none) break ;; ++ esac ++ if depmode=$depmode \ ++ source=sub/conftest.c object=$am__obj \ ++ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ ++ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ ++ >/dev/null 2>conftest.err && ++ grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && ++ grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && ++ grep $am__obj sub/conftest.Po > /dev/null 2>&1 && ++ ${MAKE-make} -s -f confmf > /dev/null 2>&1; then ++ # icc doesn't choke on unknown options, it will just issue warnings ++ # or remarks (even with -Werror). So we grep stderr for any message ++ # that says an option was ignored or not supported. ++ # When given -MP, icc 7.0 and 7.1 complain thusly: ++ # icc: Command line warning: ignoring option '-M'; no argument required ++ # The diagnosis changed in icc 8.0: ++ # icc: Command line remark: option '-MP' not supported ++ if (grep 'ignoring option' conftest.err || ++ grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else ++ am_cv_$1_dependencies_compiler_type=$depmode ++ break ++ fi ++ fi ++ done ++ ++ cd .. ++ rm -rf conftest.dir ++else ++ am_cv_$1_dependencies_compiler_type=none ++fi ++]) ++AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type]) ++AM_CONDITIONAL([am__fastdep$1], [ ++ test "x$enable_dependency_tracking" != xno \ ++ && test "$am_cv_$1_dependencies_compiler_type" = gcc3]) ++]) ++m4trace:/usr/share/aclocal-1.11/depend.m4:163: -1- AC_DEFUN([AM_SET_DEPDIR], [AC_REQUIRE([AM_SET_LEADING_DOT])dnl ++AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl ++]) ++m4trace:/usr/share/aclocal-1.11/depend.m4:171: -1- AC_DEFUN([AM_DEP_TRACK], [AC_ARG_ENABLE(dependency-tracking, ++[ --disable-dependency-tracking speeds up one-time build ++ --enable-dependency-tracking do not reject slow dependency extractors]) ++if test "x$enable_dependency_tracking" != xno; then ++ am_depcomp="$ac_aux_dir/depcomp" ++ AMDEPBACKSLASH='\' ++fi ++AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) ++AC_SUBST([AMDEPBACKSLASH])dnl ++_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl ++]) ++m4trace:/usr/share/aclocal-1.11/depout.m4:14: -1- AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], [{ ++ # Autoconf 2.62 quotes --file arguments for eval, but not when files ++ # are listed without --file. Let's play safe and only enable the eval ++ # if we detect the quoting. ++ case $CONFIG_FILES in ++ *\'*) eval set x "$CONFIG_FILES" ;; ++ *) set x $CONFIG_FILES ;; ++ esac ++ shift ++ for mf ++ do ++ # Strip MF so we end up with the name of the file. ++ mf=`echo "$mf" | sed -e 's/:.*$//'` ++ # Check whether this is an Automake generated Makefile or not. ++ # We used to match only the files named `Makefile.in', but ++ # some people rename them; so instead we look at the file content. ++ # Grep'ing the first line is not enough: some people post-process ++ # each Makefile.in and add a new line on top of each file to say so. ++ # Grep'ing the whole file is not good either: AIX grep has a line ++ # limit of 2048, but all sed's we know have understand at least 4000. ++ if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then ++ dirpart=`AS_DIRNAME("$mf")` ++ else ++ continue ++ fi ++ # Extract the definition of DEPDIR, am__include, and am__quote ++ # from the Makefile without running `make'. ++ DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` ++ test -z "$DEPDIR" && continue ++ am__include=`sed -n 's/^am__include = //p' < "$mf"` ++ test -z "am__include" && continue ++ am__quote=`sed -n 's/^am__quote = //p' < "$mf"` ++ # When using ansi2knr, U may be empty or an underscore; expand it ++ U=`sed -n 's/^U = //p' < "$mf"` ++ # Find all dependency output files, they are included files with ++ # $(DEPDIR) in their names. We invoke sed twice because it is the ++ # simplest approach to changing $(DEPDIR) to its actual value in the ++ # expansion. ++ for file in `sed -n " ++ s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ ++ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do ++ # Make sure the directory exists. ++ test -f "$dirpart/$file" && continue ++ fdir=`AS_DIRNAME(["$file"])` ++ AS_MKDIR_P([$dirpart/$fdir]) ++ # echo "creating $dirpart/$file" ++ echo '# dummy' > "$dirpart/$file" ++ done ++ done ++} ++]) ++m4trace:/usr/share/aclocal-1.11/depout.m4:75: -1- AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], [AC_CONFIG_COMMANDS([depfiles], ++ [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS], ++ [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"]) ++]) ++m4trace:/usr/share/aclocal-1.11/init.m4:26: -1- AC_DEFUN([AM_INIT_AUTOMAKE], [AC_PREREQ([2.62])dnl ++dnl Autoconf wants to disallow AM_ names. We explicitly allow ++dnl the ones we care about. ++m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl ++AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl ++AC_REQUIRE([AC_PROG_INSTALL])dnl ++if test "`cd $srcdir && pwd`" != "`pwd`"; then ++ # Use -I$(srcdir) only when $(srcdir) != ., so that make's output ++ # is not polluted with repeated "-I." ++ AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl ++ # test to see if srcdir already configured ++ if test -f $srcdir/config.status; then ++ AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) ++ fi ++fi ++ ++# test whether we have cygpath ++if test -z "$CYGPATH_W"; then ++ if (cygpath --version) >/dev/null 2>/dev/null; then ++ CYGPATH_W='cygpath -w' ++ else ++ CYGPATH_W=echo ++ fi ++fi ++AC_SUBST([CYGPATH_W]) ++ ++# Define the identity of the package. ++dnl Distinguish between old-style and new-style calls. ++m4_ifval([$2], ++[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl ++ AC_SUBST([PACKAGE], [$1])dnl ++ AC_SUBST([VERSION], [$2])], ++[_AM_SET_OPTIONS([$1])dnl ++dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT. ++m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,, ++ [m4_fatal([AC_INIT should be called with package and version arguments])])dnl ++ AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl ++ AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl ++ ++_AM_IF_OPTION([no-define],, ++[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) ++ AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl ++ ++# Some tools Automake needs. ++AC_REQUIRE([AM_SANITY_CHECK])dnl ++AC_REQUIRE([AC_ARG_PROGRAM])dnl ++AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version}) ++AM_MISSING_PROG(AUTOCONF, autoconf) ++AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}) ++AM_MISSING_PROG(AUTOHEADER, autoheader) ++AM_MISSING_PROG(MAKEINFO, makeinfo) ++AC_REQUIRE([AM_PROG_INSTALL_SH])dnl ++AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl ++AC_REQUIRE([AM_PROG_MKDIR_P])dnl ++# We need awk for the "check" target. The system "awk" is bad on ++# some platforms. ++AC_REQUIRE([AC_PROG_AWK])dnl ++AC_REQUIRE([AC_PROG_MAKE_SET])dnl ++AC_REQUIRE([AM_SET_LEADING_DOT])dnl ++_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], ++ [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], ++ [_AM_PROG_TAR([v7])])]) ++_AM_IF_OPTION([no-dependencies],, ++[AC_PROVIDE_IFELSE([AC_PROG_CC], ++ [_AM_DEPENDENCIES(CC)], ++ [define([AC_PROG_CC], ++ defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl ++AC_PROVIDE_IFELSE([AC_PROG_CXX], ++ [_AM_DEPENDENCIES(CXX)], ++ [define([AC_PROG_CXX], ++ defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl ++AC_PROVIDE_IFELSE([AC_PROG_OBJC], ++ [_AM_DEPENDENCIES(OBJC)], ++ [define([AC_PROG_OBJC], ++ defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl ++]) ++_AM_IF_OPTION([silent-rules], [AC_REQUIRE([AM_SILENT_RULES])])dnl ++dnl The `parallel-tests' driver may need to know about EXEEXT, so add the ++dnl `am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This macro ++dnl is hooked onto _AC_COMPILER_EXEEXT early, see below. ++AC_CONFIG_COMMANDS_PRE(dnl ++[m4_provide_if([_AM_COMPILER_EXEEXT], ++ [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl ++]) ++m4trace:/usr/share/aclocal-1.11/init.m4:126: -1- AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], [# Compute $1's index in $config_headers. ++_am_arg=$1 ++_am_stamp_count=1 ++for _am_header in $config_headers :; do ++ case $_am_header in ++ $_am_arg | $_am_arg:* ) ++ break ;; ++ * ) ++ _am_stamp_count=`expr $_am_stamp_count + 1` ;; ++ esac ++done ++echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count]) ++m4trace:/usr/share/aclocal-1.11/install-sh.m4:11: -1- AC_DEFUN([AM_PROG_INSTALL_SH], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl ++if test x"${install_sh}" != xset; then ++ case $am_aux_dir in ++ *\ * | *\ *) ++ install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; ++ *) ++ install_sh="\${SHELL} $am_aux_dir/install-sh" ++ esac ++fi ++AC_SUBST(install_sh)]) ++m4trace:/usr/share/aclocal-1.11/lead-dot.m4:12: -1- AC_DEFUN([AM_SET_LEADING_DOT], [rm -rf .tst 2>/dev/null ++mkdir .tst 2>/dev/null ++if test -d .tst; then ++ am__leading_dot=. ++else ++ am__leading_dot=_ ++fi ++rmdir .tst 2>/dev/null ++AC_SUBST([am__leading_dot])]) ++m4trace:/usr/share/aclocal-1.11/make.m4:14: -1- AC_DEFUN([AM_MAKE_INCLUDE], [am_make=${MAKE-make} ++cat > confinc << 'END' ++am__doit: ++ @echo this is the am__doit target ++.PHONY: am__doit ++END ++# If we don't find an include directive, just comment out the code. ++AC_MSG_CHECKING([for style of include used by $am_make]) ++am__include="#" ++am__quote= ++_am_result=none ++# First try GNU make style include. ++echo "include confinc" > confmf ++# Ignore all kinds of additional output from `make'. ++case `$am_make -s -f confmf 2> /dev/null` in #( ++*the\ am__doit\ target*) ++ am__include=include ++ am__quote= ++ _am_result=GNU ++ ;; ++esac ++# Now try BSD make style include. ++if test "$am__include" = "#"; then ++ echo '.include "confinc"' > confmf ++ case `$am_make -s -f confmf 2> /dev/null` in #( ++ *the\ am__doit\ target*) ++ am__include=.include ++ am__quote="\"" ++ _am_result=BSD ++ ;; ++ esac ++fi ++AC_SUBST([am__include]) ++AC_SUBST([am__quote]) ++AC_MSG_RESULT([$_am_result]) ++rm -f confinc confmf ++]) ++m4trace:/usr/share/aclocal-1.11/minuso.m4:14: -1- AC_DEFUN([AM_PROG_CC_C_O], [AC_REQUIRE([AC_PROG_CC_C_O])dnl ++AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl ++AC_REQUIRE_AUX_FILE([compile])dnl ++# FIXME: we rely on the cache variable name because ++# there is no other way. ++set dummy $CC ++am_cc=`echo $[2] | sed ['s/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/']` ++eval am_t=\$ac_cv_prog_cc_${am_cc}_c_o ++if test "$am_t" != yes; then ++ # Losing compiler, so override with the script. ++ # FIXME: It is wrong to rewrite CC. ++ # But if we don't then we get into trouble of one sort or another. ++ # A longer-term fix would be to have automake use am__CC in this case, ++ # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" ++ CC="$am_aux_dir/compile $CC" ++fi ++dnl Make sure AC_PROG_CC is never called again, or it will override our ++dnl setting of CC. ++m4_define([AC_PROG_CC], ++ [m4_fatal([AC_PROG_CC cannot be called after AM_PROG_CC_C_O])]) ++]) ++m4trace:/usr/share/aclocal-1.11/missing.m4:14: -1- AC_DEFUN([AM_MISSING_PROG], [AC_REQUIRE([AM_MISSING_HAS_RUN]) ++$1=${$1-"${am_missing_run}$2"} ++AC_SUBST($1)]) ++m4trace:/usr/share/aclocal-1.11/missing.m4:24: -1- AC_DEFUN([AM_MISSING_HAS_RUN], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl ++AC_REQUIRE_AUX_FILE([missing])dnl ++if test x"${MISSING+set}" != xset; then ++ case $am_aux_dir in ++ *\ * | *\ *) ++ MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; ++ *) ++ MISSING="\${SHELL} $am_aux_dir/missing" ;; ++ esac ++fi ++# Use eval to expand $SHELL ++if eval "$MISSING --run true"; then ++ am_missing_run="$MISSING --run " ++else ++ am_missing_run= ++ AC_MSG_WARN([`missing' script is too old or missing]) ++fi ++]) ++m4trace:/usr/share/aclocal-1.11/mkdirp.m4:11: -1- AC_DEFUN([AM_PROG_MKDIR_P], [AC_PREREQ([2.60])dnl ++AC_REQUIRE([AC_PROG_MKDIR_P])dnl ++dnl Automake 1.8 to 1.9.6 used to define mkdir_p. We now use MKDIR_P, ++dnl while keeping a definition of mkdir_p for backward compatibility. ++dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile. ++dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of ++dnl Makefile.ins that do not define MKDIR_P, so we do our own ++dnl adjustment using top_builddir (which is defined more often than ++dnl MKDIR_P). ++AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl ++case $mkdir_p in ++ [[\\/$]]* | ?:[[\\/]]*) ;; ++ */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;; ++esac ++]) ++m4trace:/usr/share/aclocal-1.11/options.m4:13: -1- AC_DEFUN([_AM_MANGLE_OPTION], [[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) ++m4trace:/usr/share/aclocal-1.11/options.m4:19: -1- AC_DEFUN([_AM_SET_OPTION], [m4_define(_AM_MANGLE_OPTION([$1]), 1)]) ++m4trace:/usr/share/aclocal-1.11/options.m4:25: -1- AC_DEFUN([_AM_SET_OPTIONS], [m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) ++m4trace:/usr/share/aclocal-1.11/options.m4:31: -1- AC_DEFUN([_AM_IF_OPTION], [m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) ++m4trace:/usr/share/aclocal-1.11/runlog.m4:12: -1- AC_DEFUN([AM_RUN_LOG], [{ echo "$as_me:$LINENO: $1" >&AS_MESSAGE_LOG_FD ++ ($1) >&AS_MESSAGE_LOG_FD 2>&AS_MESSAGE_LOG_FD ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD ++ (exit $ac_status); }]) ++m4trace:/usr/share/aclocal-1.11/sanity.m4:14: -1- AC_DEFUN([AM_SANITY_CHECK], [AC_MSG_CHECKING([whether build environment is sane]) ++# Just in case ++sleep 1 ++echo timestamp > conftest.file ++# Reject unsafe characters in $srcdir or the absolute working directory ++# name. Accept space and tab only in the latter. ++am_lf=' ++' ++case `pwd` in ++ *[[\\\"\#\$\&\'\`$am_lf]]*) ++ AC_MSG_ERROR([unsafe absolute working directory name]);; ++esac ++case $srcdir in ++ *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*) ++ AC_MSG_ERROR([unsafe srcdir value: `$srcdir']);; ++esac ++ ++# Do `set' in a subshell so we don't clobber the current shell's ++# arguments. Must try -L first in case configure is actually a ++# symlink; some systems play weird games with the mod time of symlinks ++# (eg FreeBSD returns the mod time of the symlink's containing ++# directory). ++if ( ++ set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` ++ if test "$[*]" = "X"; then ++ # -L didn't work. ++ set X `ls -t "$srcdir/configure" conftest.file` ++ fi ++ rm -f conftest.file ++ if test "$[*]" != "X $srcdir/configure conftest.file" \ ++ && test "$[*]" != "X conftest.file $srcdir/configure"; then ++ ++ # If neither matched, then we have a broken ls. This can happen ++ # if, for instance, CONFIG_SHELL is bash and it inherits a ++ # broken ls alias from the environment. This has actually ++ # happened. Such a system could not be considered "sane". ++ AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken ++alias in your environment]) ++ fi ++ ++ test "$[2]" = conftest.file ++ ) ++then ++ # Ok. ++ : ++else ++ AC_MSG_ERROR([newly created file is older than distributed files! ++Check your system clock]) ++fi ++AC_MSG_RESULT(yes)]) ++m4trace:/usr/share/aclocal-1.11/silent.m4:14: -1- AC_DEFUN([AM_SILENT_RULES], [AC_ARG_ENABLE([silent-rules], ++[ --enable-silent-rules less verbose build output (undo: `make V=1') ++ --disable-silent-rules verbose build output (undo: `make V=0')]) ++case $enable_silent_rules in ++yes) AM_DEFAULT_VERBOSITY=0;; ++no) AM_DEFAULT_VERBOSITY=1;; ++*) AM_DEFAULT_VERBOSITY=m4_if([$1], [yes], [0], [1]);; ++esac ++AC_SUBST([AM_DEFAULT_VERBOSITY])dnl ++AM_BACKSLASH='\' ++AC_SUBST([AM_BACKSLASH])dnl ++_AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl ++]) ++m4trace:/usr/share/aclocal-1.11/strip.m4:17: -1- AC_DEFUN([AM_PROG_INSTALL_STRIP], [AC_REQUIRE([AM_PROG_INSTALL_SH])dnl ++# Installed binaries are usually stripped using `strip' when the user ++# run `make install-strip'. However `strip' might not be the right ++# tool to use in cross-compilation environments, therefore Automake ++# will honor the `STRIP' environment variable to overrule this program. ++dnl Don't test for $cross_compiling = yes, because it might be `maybe'. ++if test "$cross_compiling" != no; then ++ AC_CHECK_TOOL([STRIP], [strip], :) ++fi ++INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" ++AC_SUBST([INSTALL_STRIP_PROGRAM])]) ++m4trace:/usr/share/aclocal-1.11/substnot.m4:14: -1- AC_DEFUN([_AM_SUBST_NOTMAKE]) ++m4trace:/usr/share/aclocal-1.11/substnot.m4:19: -1- AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)]) ++m4trace:/usr/share/aclocal-1.11/tar.m4:24: -1- AC_DEFUN([_AM_PROG_TAR], [# Always define AMTAR for backward compatibility. ++AM_MISSING_PROG([AMTAR], [tar]) ++m4_if([$1], [v7], ++ [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'], ++ [m4_case([$1], [ustar],, [pax],, ++ [m4_fatal([Unknown tar format])]) ++AC_MSG_CHECKING([how to create a $1 tar archive]) ++# Loop over all known methods to create a tar archive until one works. ++_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' ++_am_tools=${am_cv_prog_tar_$1-$_am_tools} ++# Do not fold the above two line into one, because Tru64 sh and ++# Solaris sh will not grok spaces in the rhs of `-'. ++for _am_tool in $_am_tools ++do ++ case $_am_tool in ++ gnutar) ++ for _am_tar in tar gnutar gtar; ++ do ++ AM_RUN_LOG([$_am_tar --version]) && break ++ done ++ am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' ++ am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' ++ am__untar="$_am_tar -xf -" ++ ;; ++ plaintar) ++ # Must skip GNU tar: if it does not support --format= it doesn't create ++ # ustar tarball either. ++ (tar --version) >/dev/null 2>&1 && continue ++ am__tar='tar chf - "$$tardir"' ++ am__tar_='tar chf - "$tardir"' ++ am__untar='tar xf -' ++ ;; ++ pax) ++ am__tar='pax -L -x $1 -w "$$tardir"' ++ am__tar_='pax -L -x $1 -w "$tardir"' ++ am__untar='pax -r' ++ ;; ++ cpio) ++ am__tar='find "$$tardir" -print | cpio -o -H $1 -L' ++ am__tar_='find "$tardir" -print | cpio -o -H $1 -L' ++ am__untar='cpio -i -H $1 -d' ++ ;; ++ none) ++ am__tar=false ++ am__tar_=false ++ am__untar=false ++ ;; ++ esac ++ ++ # If the value was cached, stop now. We just wanted to have am__tar ++ # and am__untar set. ++ test -n "${am_cv_prog_tar_$1}" && break ++ ++ # tar/untar a dummy directory, and stop if the command works ++ rm -rf conftest.dir ++ mkdir conftest.dir ++ echo GrepMe > conftest.dir/file ++ AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) ++ rm -rf conftest.dir ++ if test -s conftest.tar; then ++ AM_RUN_LOG([$am__untar /dev/null 2>&1 && break ++ fi ++done ++rm -rf conftest.dir ++ ++AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) ++AC_MSG_RESULT([$am_cv_prog_tar_$1])]) ++AC_SUBST([am__tar]) ++AC_SUBST([am__untar]) ++]) ++m4trace:configure.ac:1: -1- m4_pattern_forbid([^_?A[CHUM]_]) ++m4trace:configure.ac:1: -1- m4_pattern_forbid([_AC_]) ++m4trace:configure.ac:1: -1- m4_pattern_forbid([^LIBOBJS$], [do not use LIBOBJS directly, use AC_LIBOBJ (see section `AC_LIBOBJ vs LIBOBJS']) ++m4trace:configure.ac:1: -1- m4_pattern_allow([^AS_FLAGS$]) ++m4trace:configure.ac:1: -1- m4_pattern_forbid([^_?m4_]) ++m4trace:configure.ac:1: -1- m4_pattern_forbid([^dnl$]) ++m4trace:configure.ac:1: -1- m4_pattern_forbid([^_?AS_]) ++m4trace:configure.ac:1: -1- m4_pattern_allow([^SHELL$]) ++m4trace:configure.ac:1: -1- m4_pattern_allow([^PATH_SEPARATOR$]) ++m4trace:configure.ac:1: -1- m4_pattern_allow([^PACKAGE_NAME$]) ++m4trace:configure.ac:1: -1- m4_pattern_allow([^PACKAGE_TARNAME$]) ++m4trace:configure.ac:1: -1- m4_pattern_allow([^PACKAGE_VERSION$]) ++m4trace:configure.ac:1: -1- m4_pattern_allow([^PACKAGE_STRING$]) ++m4trace:configure.ac:1: -1- m4_pattern_allow([^PACKAGE_BUGREPORT$]) ++m4trace:configure.ac:1: -1- m4_pattern_allow([^PACKAGE_URL$]) ++m4trace:configure.ac:1: -1- m4_pattern_allow([^exec_prefix$]) ++m4trace:configure.ac:1: -1- m4_pattern_allow([^prefix$]) ++m4trace:configure.ac:1: -1- m4_pattern_allow([^program_transform_name$]) ++m4trace:configure.ac:1: -1- m4_pattern_allow([^bindir$]) ++m4trace:configure.ac:1: -1- m4_pattern_allow([^sbindir$]) ++m4trace:configure.ac:1: -1- m4_pattern_allow([^libexecdir$]) ++m4trace:configure.ac:1: -1- m4_pattern_allow([^datarootdir$]) ++m4trace:configure.ac:1: -1- m4_pattern_allow([^datadir$]) ++m4trace:configure.ac:1: -1- m4_pattern_allow([^sysconfdir$]) ++m4trace:configure.ac:1: -1- m4_pattern_allow([^sharedstatedir$]) ++m4trace:configure.ac:1: -1- m4_pattern_allow([^localstatedir$]) ++m4trace:configure.ac:1: -1- m4_pattern_allow([^includedir$]) ++m4trace:configure.ac:1: -1- m4_pattern_allow([^oldincludedir$]) ++m4trace:configure.ac:1: -1- m4_pattern_allow([^docdir$]) ++m4trace:configure.ac:1: -1- m4_pattern_allow([^infodir$]) ++m4trace:configure.ac:1: -1- m4_pattern_allow([^htmldir$]) ++m4trace:configure.ac:1: -1- m4_pattern_allow([^dvidir$]) ++m4trace:configure.ac:1: -1- m4_pattern_allow([^pdfdir$]) ++m4trace:configure.ac:1: -1- m4_pattern_allow([^psdir$]) ++m4trace:configure.ac:1: -1- m4_pattern_allow([^libdir$]) ++m4trace:configure.ac:1: -1- m4_pattern_allow([^localedir$]) ++m4trace:configure.ac:1: -1- m4_pattern_allow([^mandir$]) ++m4trace:configure.ac:1: -1- m4_pattern_allow([^PACKAGE_NAME$]) ++m4trace:configure.ac:1: -1- m4_pattern_allow([^PACKAGE_TARNAME$]) ++m4trace:configure.ac:1: -1- m4_pattern_allow([^PACKAGE_VERSION$]) ++m4trace:configure.ac:1: -1- m4_pattern_allow([^PACKAGE_STRING$]) ++m4trace:configure.ac:1: -1- m4_pattern_allow([^PACKAGE_BUGREPORT$]) ++m4trace:configure.ac:1: -1- m4_pattern_allow([^PACKAGE_URL$]) ++m4trace:configure.ac:1: -1- m4_pattern_allow([^DEFS$]) ++m4trace:configure.ac:1: -1- m4_pattern_allow([^ECHO_C$]) ++m4trace:configure.ac:1: -1- m4_pattern_allow([^ECHO_N$]) ++m4trace:configure.ac:1: -1- m4_pattern_allow([^ECHO_T$]) ++m4trace:configure.ac:1: -1- m4_pattern_allow([^LIBS$]) ++m4trace:configure.ac:1: -1- m4_pattern_allow([^build_alias$]) ++m4trace:configure.ac:1: -1- m4_pattern_allow([^host_alias$]) ++m4trace:configure.ac:1: -1- m4_pattern_allow([^target_alias$]) ++m4trace:configure.ac:2: -1- AM_INIT_AUTOMAKE([-Wall -Werror foreign]) ++m4trace:configure.ac:2: -1- m4_pattern_allow([^AM_[A-Z]+FLAGS$]) ++m4trace:configure.ac:2: -1- AM_SET_CURRENT_AUTOMAKE_VERSION ++m4trace:configure.ac:2: -1- AM_AUTOMAKE_VERSION([1.11.1]) ++m4trace:configure.ac:2: -1- _AM_AUTOCONF_VERSION([2.68]) ++m4trace:configure.ac:2: -1- m4_pattern_allow([^INSTALL_PROGRAM$]) ++m4trace:configure.ac:2: -1- m4_pattern_allow([^INSTALL_SCRIPT$]) ++m4trace:configure.ac:2: -1- m4_pattern_allow([^INSTALL_DATA$]) ++m4trace:configure.ac:2: -1- m4_pattern_allow([^am__isrc$]) ++m4trace:configure.ac:2: -1- _AM_SUBST_NOTMAKE([am__isrc]) ++m4trace:configure.ac:2: -1- m4_pattern_allow([^CYGPATH_W$]) ++m4trace:configure.ac:2: -1- _AM_SET_OPTIONS([-Wall -Werror foreign]) ++m4trace:configure.ac:2: -1- _AM_SET_OPTION([-Wall]) ++m4trace:configure.ac:2: -2- _AM_MANGLE_OPTION([-Wall]) ++m4trace:configure.ac:2: -1- _AM_SET_OPTION([-Werror]) ++m4trace:configure.ac:2: -2- _AM_MANGLE_OPTION([-Werror]) ++m4trace:configure.ac:2: -1- _AM_SET_OPTION([foreign]) ++m4trace:configure.ac:2: -2- _AM_MANGLE_OPTION([foreign]) ++m4trace:configure.ac:2: -1- m4_pattern_allow([^PACKAGE$]) ++m4trace:configure.ac:2: -1- m4_pattern_allow([^VERSION$]) ++m4trace:configure.ac:2: -1- _AM_IF_OPTION([no-define], [], [AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) ++ AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])]) ++m4trace:configure.ac:2: -2- _AM_MANGLE_OPTION([no-define]) ++m4trace:configure.ac:2: -1- m4_pattern_allow([^PACKAGE$]) ++m4trace:configure.ac:2: -1- m4_pattern_allow([^VERSION$]) ++m4trace:configure.ac:2: -1- AM_SANITY_CHECK ++m4trace:configure.ac:2: -1- AM_MISSING_PROG([ACLOCAL], [aclocal-${am__api_version}]) ++m4trace:configure.ac:2: -1- AM_MISSING_HAS_RUN ++m4trace:configure.ac:2: -1- AM_AUX_DIR_EXPAND ++m4trace:configure.ac:2: -1- m4_pattern_allow([^ACLOCAL$]) ++m4trace:configure.ac:2: -1- AM_MISSING_PROG([AUTOCONF], [autoconf]) ++m4trace:configure.ac:2: -1- m4_pattern_allow([^AUTOCONF$]) ++m4trace:configure.ac:2: -1- AM_MISSING_PROG([AUTOMAKE], [automake-${am__api_version}]) ++m4trace:configure.ac:2: -1- m4_pattern_allow([^AUTOMAKE$]) ++m4trace:configure.ac:2: -1- AM_MISSING_PROG([AUTOHEADER], [autoheader]) ++m4trace:configure.ac:2: -1- m4_pattern_allow([^AUTOHEADER$]) ++m4trace:configure.ac:2: -1- AM_MISSING_PROG([MAKEINFO], [makeinfo]) ++m4trace:configure.ac:2: -1- m4_pattern_allow([^MAKEINFO$]) ++m4trace:configure.ac:2: -1- AM_PROG_INSTALL_SH ++m4trace:configure.ac:2: -1- m4_pattern_allow([^install_sh$]) ++m4trace:configure.ac:2: -1- AM_PROG_INSTALL_STRIP ++m4trace:configure.ac:2: -1- m4_pattern_allow([^STRIP$]) ++m4trace:configure.ac:2: -1- m4_pattern_allow([^INSTALL_STRIP_PROGRAM$]) ++m4trace:configure.ac:2: -1- AM_PROG_MKDIR_P ++m4trace:configure.ac:2: -1- m4_pattern_allow([^MKDIR_P$]) ++m4trace:configure.ac:2: -1- m4_pattern_allow([^mkdir_p$]) ++m4trace:configure.ac:2: -1- m4_pattern_allow([^AWK$]) ++m4trace:configure.ac:2: -1- m4_pattern_allow([^SET_MAKE$]) ++m4trace:configure.ac:2: -1- AM_SET_LEADING_DOT ++m4trace:configure.ac:2: -1- m4_pattern_allow([^am__leading_dot$]) ++m4trace:configure.ac:2: -1- _AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], ++ [_AM_PROG_TAR([v7])])]) ++m4trace:configure.ac:2: -2- _AM_MANGLE_OPTION([tar-ustar]) ++m4trace:configure.ac:2: -1- _AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], [_AM_PROG_TAR([v7])]) ++m4trace:configure.ac:2: -2- _AM_MANGLE_OPTION([tar-pax]) ++m4trace:configure.ac:2: -1- _AM_PROG_TAR([v7]) ++m4trace:configure.ac:2: -1- AM_MISSING_PROG([AMTAR], [tar]) ++m4trace:configure.ac:2: -1- m4_pattern_allow([^AMTAR$]) ++m4trace:configure.ac:2: -1- m4_pattern_allow([^am__tar$]) ++m4trace:configure.ac:2: -1- m4_pattern_allow([^am__untar$]) ++m4trace:configure.ac:2: -1- _AM_IF_OPTION([no-dependencies], [], [AC_PROVIDE_IFELSE([AC_PROG_CC], ++ [_AM_DEPENDENCIES(CC)], ++ [define([AC_PROG_CC], ++ defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl ++AC_PROVIDE_IFELSE([AC_PROG_CXX], ++ [_AM_DEPENDENCIES(CXX)], ++ [define([AC_PROG_CXX], ++ defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl ++AC_PROVIDE_IFELSE([AC_PROG_OBJC], ++ [_AM_DEPENDENCIES(OBJC)], ++ [define([AC_PROG_OBJC], ++ defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl ++]) ++m4trace:configure.ac:2: -2- _AM_MANGLE_OPTION([no-dependencies]) ++m4trace:configure.ac:2: -1- _AM_IF_OPTION([silent-rules], [AC_REQUIRE([AM_SILENT_RULES])]) ++m4trace:configure.ac:2: -2- _AM_MANGLE_OPTION([silent-rules]) ++m4trace:configure.ac:4: -1- m4_pattern_allow([^CC$]) ++m4trace:configure.ac:4: -1- m4_pattern_allow([^CFLAGS$]) ++m4trace:configure.ac:4: -1- m4_pattern_allow([^LDFLAGS$]) ++m4trace:configure.ac:4: -1- m4_pattern_allow([^LIBS$]) ++m4trace:configure.ac:4: -1- m4_pattern_allow([^CPPFLAGS$]) ++m4trace:configure.ac:4: -1- m4_pattern_allow([^CC$]) ++m4trace:configure.ac:4: -1- m4_pattern_allow([^CC$]) ++m4trace:configure.ac:4: -1- m4_pattern_allow([^CC$]) ++m4trace:configure.ac:4: -1- m4_pattern_allow([^CC$]) ++m4trace:configure.ac:4: -1- m4_pattern_allow([^ac_ct_CC$]) ++m4trace:configure.ac:4: -1- m4_pattern_allow([^EXEEXT$]) ++m4trace:configure.ac:4: -1- m4_pattern_allow([^OBJEXT$]) ++m4trace:configure.ac:4: -1- _AM_DEPENDENCIES([CC]) ++m4trace:configure.ac:4: -1- AM_SET_DEPDIR ++m4trace:configure.ac:4: -1- m4_pattern_allow([^DEPDIR$]) ++m4trace:configure.ac:4: -1- AM_OUTPUT_DEPENDENCY_COMMANDS ++m4trace:configure.ac:4: -1- AM_MAKE_INCLUDE ++m4trace:configure.ac:4: -1- m4_pattern_allow([^am__include$]) ++m4trace:configure.ac:4: -1- m4_pattern_allow([^am__quote$]) ++m4trace:configure.ac:4: -1- AM_DEP_TRACK ++m4trace:configure.ac:4: -1- AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) ++m4trace:configure.ac:4: -1- m4_pattern_allow([^AMDEP_TRUE$]) ++m4trace:configure.ac:4: -1- m4_pattern_allow([^AMDEP_FALSE$]) ++m4trace:configure.ac:4: -1- _AM_SUBST_NOTMAKE([AMDEP_TRUE]) ++m4trace:configure.ac:4: -1- _AM_SUBST_NOTMAKE([AMDEP_FALSE]) ++m4trace:configure.ac:4: -1- m4_pattern_allow([^AMDEPBACKSLASH$]) ++m4trace:configure.ac:4: -1- _AM_SUBST_NOTMAKE([AMDEPBACKSLASH]) ++m4trace:configure.ac:4: -1- m4_pattern_allow([^CCDEPMODE$]) ++m4trace:configure.ac:4: -1- AM_CONDITIONAL([am__fastdepCC], [ ++ test "x$enable_dependency_tracking" != xno \ ++ && test "$am_cv_CC_dependencies_compiler_type" = gcc3]) ++m4trace:configure.ac:4: -1- m4_pattern_allow([^am__fastdepCC_TRUE$]) ++m4trace:configure.ac:4: -1- m4_pattern_allow([^am__fastdepCC_FALSE$]) ++m4trace:configure.ac:4: -1- _AM_SUBST_NOTMAKE([am__fastdepCC_TRUE]) ++m4trace:configure.ac:4: -1- _AM_SUBST_NOTMAKE([am__fastdepCC_FALSE]) ++m4trace:configure.ac:5: -1- AM_PROG_CC_C_O ++m4trace:configure.ac:5: -1- m4_pattern_allow([^NO_MINUS_C_MINUS_O$]) ++m4trace:configure.ac:7: -1- PKG_CHECK_MODULES([HBAAPI], [HBAAPI]) ++m4trace:configure.ac:7: -1- PKG_PROG_PKG_CONFIG ++m4trace:configure.ac:7: -1- m4_pattern_forbid([^_?PKG_[A-Z_]+$]) ++m4trace:configure.ac:7: -1- m4_pattern_allow([^PKG_CONFIG(_(PATH|LIBDIR|SYSROOT_DIR|ALLOW_SYSTEM_(CFLAGS|LIBS)))?$]) ++m4trace:configure.ac:7: -1- m4_pattern_allow([^PKG_CONFIG_(DISABLE_UNINSTALLED|TOP_BUILD_DIR|DEBUG_SPEW)$]) ++m4trace:configure.ac:7: -1- m4_pattern_allow([^PKG_CONFIG$]) ++m4trace:configure.ac:7: -1- m4_pattern_allow([^PKG_CONFIG_PATH$]) ++m4trace:configure.ac:7: -1- m4_pattern_allow([^PKG_CONFIG_LIBDIR$]) ++m4trace:configure.ac:7: -1- m4_pattern_allow([^PKG_CONFIG$]) ++m4trace:configure.ac:7: -1- m4_pattern_allow([^HBAAPI_CFLAGS$]) ++m4trace:configure.ac:7: -1- m4_pattern_allow([^HBAAPI_LIBS$]) ++m4trace:configure.ac:7: -1- PKG_CHECK_EXISTS([HBAAPI], [pkg_cv_[]HBAAPI_CFLAGS=`$PKG_CONFIG --[]cflags "HBAAPI" 2>/dev/null` ++ test "x$?" != "x0" && pkg_failed=yes ], [pkg_failed=yes]) ++m4trace:configure.ac:7: -1- PKG_CHECK_EXISTS([HBAAPI], [pkg_cv_[]HBAAPI_LIBS=`$PKG_CONFIG --[]libs "HBAAPI" 2>/dev/null` ++ test "x$?" != "x0" && pkg_failed=yes ], [pkg_failed=yes]) ++m4trace:configure.ac:7: -1- _PKG_SHORT_ERRORS_SUPPORTED ++m4trace:configure.ac:8: -1- m4_pattern_allow([^HBAAPI_CFLAGS$]) ++m4trace:configure.ac:9: -1- m4_pattern_allow([^HBAAPI_LIBS$]) ++m4trace:configure.ac:16: -1- AM_CONDITIONAL([WITH_DCB], [test "X$with_dcb" != Xno]) ++m4trace:configure.ac:16: -1- m4_pattern_allow([^WITH_DCB_TRUE$]) ++m4trace:configure.ac:16: -1- m4_pattern_allow([^WITH_DCB_FALSE$]) ++m4trace:configure.ac:16: -1- _AM_SUBST_NOTMAKE([WITH_DCB_TRUE]) ++m4trace:configure.ac:16: -1- _AM_SUBST_NOTMAKE([WITH_DCB_FALSE]) ++m4trace:configure.ac:18: -1- PKG_CHECK_MODULES([DCBD], [dcbd]) ++m4trace:configure.ac:18: -1- m4_pattern_allow([^DCBD_CFLAGS$]) ++m4trace:configure.ac:18: -1- m4_pattern_allow([^DCBD_LIBS$]) ++m4trace:configure.ac:18: -1- PKG_CHECK_EXISTS([dcbd], [pkg_cv_[]DCBD_CFLAGS=`$PKG_CONFIG --[]cflags "dcbd" 2>/dev/null` ++ test "x$?" != "x0" && pkg_failed=yes ], [pkg_failed=yes]) ++m4trace:configure.ac:18: -1- PKG_CHECK_EXISTS([dcbd], [pkg_cv_[]DCBD_LIBS=`$PKG_CONFIG --[]libs "dcbd" 2>/dev/null` ++ test "x$?" != "x0" && pkg_failed=yes ], [pkg_failed=yes]) ++m4trace:configure.ac:18: -1- _PKG_SHORT_ERRORS_SUPPORTED ++m4trace:configure.ac:18: -1- m4_pattern_allow([^DCBD_CFLAGS$]) ++m4trace:configure.ac:23: -1- m4_pattern_allow([^LIB@&t@OBJS$]) ++m4trace:configure.ac:23: -1- m4_pattern_allow([^LTLIBOBJS$]) ++m4trace:configure.ac:23: -1- AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"]) ++m4trace:configure.ac:23: -1- m4_pattern_allow([^am__EXEEXT_TRUE$]) ++m4trace:configure.ac:23: -1- m4_pattern_allow([^am__EXEEXT_FALSE$]) ++m4trace:configure.ac:23: -1- _AM_SUBST_NOTMAKE([am__EXEEXT_TRUE]) ++m4trace:configure.ac:23: -1- _AM_SUBST_NOTMAKE([am__EXEEXT_FALSE]) ++m4trace:configure.ac:23: -1- _AM_OUTPUT_DEPENDENCY_COMMANDS +diff -Nur -x '*.orig' -x '*~' fcoe-utils-1.0.9//autom4te.cache/traces.1 fcoe-utils-1.0.9.new//autom4te.cache/traces.1 +--- fcoe-utils-1.0.9//autom4te.cache/traces.1 1969-12-31 19:00:00.000000000 -0500 ++++ fcoe-utils-1.0.9.new//autom4te.cache/traces.1 2011-09-14 11:57:05.000000000 -0400 +@@ -0,0 +1,382 @@ ++m4trace:configure.ac:1: -1- AC_INIT([fcoe-utils], [1.0.9], [devel@open-fcoe.org]) ++m4trace:configure.ac:1: -1- m4_pattern_forbid([^_?A[CHUM]_]) ++m4trace:configure.ac:1: -1- m4_pattern_forbid([_AC_]) ++m4trace:configure.ac:1: -1- m4_pattern_forbid([^LIBOBJS$], [do not use LIBOBJS directly, use AC_LIBOBJ (see section `AC_LIBOBJ vs LIBOBJS']) ++m4trace:configure.ac:1: -1- m4_pattern_allow([^AS_FLAGS$]) ++m4trace:configure.ac:1: -1- m4_pattern_forbid([^_?m4_]) ++m4trace:configure.ac:1: -1- m4_pattern_forbid([^dnl$]) ++m4trace:configure.ac:1: -1- m4_pattern_forbid([^_?AS_]) ++m4trace:configure.ac:1: -1- AC_SUBST([SHELL]) ++m4trace:configure.ac:1: -1- AC_SUBST_TRACE([SHELL]) ++m4trace:configure.ac:1: -1- m4_pattern_allow([^SHELL$]) ++m4trace:configure.ac:1: -1- AC_SUBST([PATH_SEPARATOR]) ++m4trace:configure.ac:1: -1- AC_SUBST_TRACE([PATH_SEPARATOR]) ++m4trace:configure.ac:1: -1- m4_pattern_allow([^PATH_SEPARATOR$]) ++m4trace:configure.ac:1: -1- AC_SUBST([PACKAGE_NAME], [m4_ifdef([AC_PACKAGE_NAME], ['AC_PACKAGE_NAME'])]) ++m4trace:configure.ac:1: -1- AC_SUBST_TRACE([PACKAGE_NAME]) ++m4trace:configure.ac:1: -1- m4_pattern_allow([^PACKAGE_NAME$]) ++m4trace:configure.ac:1: -1- AC_SUBST([PACKAGE_TARNAME], [m4_ifdef([AC_PACKAGE_TARNAME], ['AC_PACKAGE_TARNAME'])]) ++m4trace:configure.ac:1: -1- AC_SUBST_TRACE([PACKAGE_TARNAME]) ++m4trace:configure.ac:1: -1- m4_pattern_allow([^PACKAGE_TARNAME$]) ++m4trace:configure.ac:1: -1- AC_SUBST([PACKAGE_VERSION], [m4_ifdef([AC_PACKAGE_VERSION], ['AC_PACKAGE_VERSION'])]) ++m4trace:configure.ac:1: -1- AC_SUBST_TRACE([PACKAGE_VERSION]) ++m4trace:configure.ac:1: -1- m4_pattern_allow([^PACKAGE_VERSION$]) ++m4trace:configure.ac:1: -1- AC_SUBST([PACKAGE_STRING], [m4_ifdef([AC_PACKAGE_STRING], ['AC_PACKAGE_STRING'])]) ++m4trace:configure.ac:1: -1- AC_SUBST_TRACE([PACKAGE_STRING]) ++m4trace:configure.ac:1: -1- m4_pattern_allow([^PACKAGE_STRING$]) ++m4trace:configure.ac:1: -1- AC_SUBST([PACKAGE_BUGREPORT], [m4_ifdef([AC_PACKAGE_BUGREPORT], ['AC_PACKAGE_BUGREPORT'])]) ++m4trace:configure.ac:1: -1- AC_SUBST_TRACE([PACKAGE_BUGREPORT]) ++m4trace:configure.ac:1: -1- m4_pattern_allow([^PACKAGE_BUGREPORT$]) ++m4trace:configure.ac:1: -1- AC_SUBST([PACKAGE_URL], [m4_ifdef([AC_PACKAGE_URL], ['AC_PACKAGE_URL'])]) ++m4trace:configure.ac:1: -1- AC_SUBST_TRACE([PACKAGE_URL]) ++m4trace:configure.ac:1: -1- m4_pattern_allow([^PACKAGE_URL$]) ++m4trace:configure.ac:1: -1- AC_SUBST([exec_prefix], [NONE]) ++m4trace:configure.ac:1: -1- AC_SUBST_TRACE([exec_prefix]) ++m4trace:configure.ac:1: -1- m4_pattern_allow([^exec_prefix$]) ++m4trace:configure.ac:1: -1- AC_SUBST([prefix], [NONE]) ++m4trace:configure.ac:1: -1- AC_SUBST_TRACE([prefix]) ++m4trace:configure.ac:1: -1- m4_pattern_allow([^prefix$]) ++m4trace:configure.ac:1: -1- AC_SUBST([program_transform_name], [s,x,x,]) ++m4trace:configure.ac:1: -1- AC_SUBST_TRACE([program_transform_name]) ++m4trace:configure.ac:1: -1- m4_pattern_allow([^program_transform_name$]) ++m4trace:configure.ac:1: -1- AC_SUBST([bindir], ['${exec_prefix}/bin']) ++m4trace:configure.ac:1: -1- AC_SUBST_TRACE([bindir]) ++m4trace:configure.ac:1: -1- m4_pattern_allow([^bindir$]) ++m4trace:configure.ac:1: -1- AC_SUBST([sbindir], ['${exec_prefix}/sbin']) ++m4trace:configure.ac:1: -1- AC_SUBST_TRACE([sbindir]) ++m4trace:configure.ac:1: -1- m4_pattern_allow([^sbindir$]) ++m4trace:configure.ac:1: -1- AC_SUBST([libexecdir], ['${exec_prefix}/libexec']) ++m4trace:configure.ac:1: -1- AC_SUBST_TRACE([libexecdir]) ++m4trace:configure.ac:1: -1- m4_pattern_allow([^libexecdir$]) ++m4trace:configure.ac:1: -1- AC_SUBST([datarootdir], ['${prefix}/share']) ++m4trace:configure.ac:1: -1- AC_SUBST_TRACE([datarootdir]) ++m4trace:configure.ac:1: -1- m4_pattern_allow([^datarootdir$]) ++m4trace:configure.ac:1: -1- AC_SUBST([datadir], ['${datarootdir}']) ++m4trace:configure.ac:1: -1- AC_SUBST_TRACE([datadir]) ++m4trace:configure.ac:1: -1- m4_pattern_allow([^datadir$]) ++m4trace:configure.ac:1: -1- AC_SUBST([sysconfdir], ['${prefix}/etc']) ++m4trace:configure.ac:1: -1- AC_SUBST_TRACE([sysconfdir]) ++m4trace:configure.ac:1: -1- m4_pattern_allow([^sysconfdir$]) ++m4trace:configure.ac:1: -1- AC_SUBST([sharedstatedir], ['${prefix}/com']) ++m4trace:configure.ac:1: -1- AC_SUBST_TRACE([sharedstatedir]) ++m4trace:configure.ac:1: -1- m4_pattern_allow([^sharedstatedir$]) ++m4trace:configure.ac:1: -1- AC_SUBST([localstatedir], ['${prefix}/var']) ++m4trace:configure.ac:1: -1- AC_SUBST_TRACE([localstatedir]) ++m4trace:configure.ac:1: -1- m4_pattern_allow([^localstatedir$]) ++m4trace:configure.ac:1: -1- AC_SUBST([includedir], ['${prefix}/include']) ++m4trace:configure.ac:1: -1- AC_SUBST_TRACE([includedir]) ++m4trace:configure.ac:1: -1- m4_pattern_allow([^includedir$]) ++m4trace:configure.ac:1: -1- AC_SUBST([oldincludedir], ['/usr/include']) ++m4trace:configure.ac:1: -1- AC_SUBST_TRACE([oldincludedir]) ++m4trace:configure.ac:1: -1- m4_pattern_allow([^oldincludedir$]) ++m4trace:configure.ac:1: -1- AC_SUBST([docdir], [m4_ifset([AC_PACKAGE_TARNAME], ++ ['${datarootdir}/doc/${PACKAGE_TARNAME}'], ++ ['${datarootdir}/doc/${PACKAGE}'])]) ++m4trace:configure.ac:1: -1- AC_SUBST_TRACE([docdir]) ++m4trace:configure.ac:1: -1- m4_pattern_allow([^docdir$]) ++m4trace:configure.ac:1: -1- AC_SUBST([infodir], ['${datarootdir}/info']) ++m4trace:configure.ac:1: -1- AC_SUBST_TRACE([infodir]) ++m4trace:configure.ac:1: -1- m4_pattern_allow([^infodir$]) ++m4trace:configure.ac:1: -1- AC_SUBST([htmldir], ['${docdir}']) ++m4trace:configure.ac:1: -1- AC_SUBST_TRACE([htmldir]) ++m4trace:configure.ac:1: -1- m4_pattern_allow([^htmldir$]) ++m4trace:configure.ac:1: -1- AC_SUBST([dvidir], ['${docdir}']) ++m4trace:configure.ac:1: -1- AC_SUBST_TRACE([dvidir]) ++m4trace:configure.ac:1: -1- m4_pattern_allow([^dvidir$]) ++m4trace:configure.ac:1: -1- AC_SUBST([pdfdir], ['${docdir}']) ++m4trace:configure.ac:1: -1- AC_SUBST_TRACE([pdfdir]) ++m4trace:configure.ac:1: -1- m4_pattern_allow([^pdfdir$]) ++m4trace:configure.ac:1: -1- AC_SUBST([psdir], ['${docdir}']) ++m4trace:configure.ac:1: -1- AC_SUBST_TRACE([psdir]) ++m4trace:configure.ac:1: -1- m4_pattern_allow([^psdir$]) ++m4trace:configure.ac:1: -1- AC_SUBST([libdir], ['${exec_prefix}/lib']) ++m4trace:configure.ac:1: -1- AC_SUBST_TRACE([libdir]) ++m4trace:configure.ac:1: -1- m4_pattern_allow([^libdir$]) ++m4trace:configure.ac:1: -1- AC_SUBST([localedir], ['${datarootdir}/locale']) ++m4trace:configure.ac:1: -1- AC_SUBST_TRACE([localedir]) ++m4trace:configure.ac:1: -1- m4_pattern_allow([^localedir$]) ++m4trace:configure.ac:1: -1- AC_SUBST([mandir], ['${datarootdir}/man']) ++m4trace:configure.ac:1: -1- AC_SUBST_TRACE([mandir]) ++m4trace:configure.ac:1: -1- m4_pattern_allow([^mandir$]) ++m4trace:configure.ac:1: -1- AC_DEFINE_TRACE_LITERAL([PACKAGE_NAME]) ++m4trace:configure.ac:1: -1- m4_pattern_allow([^PACKAGE_NAME$]) ++m4trace:configure.ac:1: -1- AH_OUTPUT([PACKAGE_NAME], [/* Define to the full name of this package. */ ++@%:@undef PACKAGE_NAME]) ++m4trace:configure.ac:1: -1- AC_DEFINE_TRACE_LITERAL([PACKAGE_TARNAME]) ++m4trace:configure.ac:1: -1- m4_pattern_allow([^PACKAGE_TARNAME$]) ++m4trace:configure.ac:1: -1- AH_OUTPUT([PACKAGE_TARNAME], [/* Define to the one symbol short name of this package. */ ++@%:@undef PACKAGE_TARNAME]) ++m4trace:configure.ac:1: -1- AC_DEFINE_TRACE_LITERAL([PACKAGE_VERSION]) ++m4trace:configure.ac:1: -1- m4_pattern_allow([^PACKAGE_VERSION$]) ++m4trace:configure.ac:1: -1- AH_OUTPUT([PACKAGE_VERSION], [/* Define to the version of this package. */ ++@%:@undef PACKAGE_VERSION]) ++m4trace:configure.ac:1: -1- AC_DEFINE_TRACE_LITERAL([PACKAGE_STRING]) ++m4trace:configure.ac:1: -1- m4_pattern_allow([^PACKAGE_STRING$]) ++m4trace:configure.ac:1: -1- AH_OUTPUT([PACKAGE_STRING], [/* Define to the full name and version of this package. */ ++@%:@undef PACKAGE_STRING]) ++m4trace:configure.ac:1: -1- AC_DEFINE_TRACE_LITERAL([PACKAGE_BUGREPORT]) ++m4trace:configure.ac:1: -1- m4_pattern_allow([^PACKAGE_BUGREPORT$]) ++m4trace:configure.ac:1: -1- AH_OUTPUT([PACKAGE_BUGREPORT], [/* Define to the address where bug reports for this package should be sent. */ ++@%:@undef PACKAGE_BUGREPORT]) ++m4trace:configure.ac:1: -1- AC_DEFINE_TRACE_LITERAL([PACKAGE_URL]) ++m4trace:configure.ac:1: -1- m4_pattern_allow([^PACKAGE_URL$]) ++m4trace:configure.ac:1: -1- AH_OUTPUT([PACKAGE_URL], [/* Define to the home page for this package. */ ++@%:@undef PACKAGE_URL]) ++m4trace:configure.ac:1: -1- AC_SUBST([DEFS]) ++m4trace:configure.ac:1: -1- AC_SUBST_TRACE([DEFS]) ++m4trace:configure.ac:1: -1- m4_pattern_allow([^DEFS$]) ++m4trace:configure.ac:1: -1- AC_SUBST([ECHO_C]) ++m4trace:configure.ac:1: -1- AC_SUBST_TRACE([ECHO_C]) ++m4trace:configure.ac:1: -1- m4_pattern_allow([^ECHO_C$]) ++m4trace:configure.ac:1: -1- AC_SUBST([ECHO_N]) ++m4trace:configure.ac:1: -1- AC_SUBST_TRACE([ECHO_N]) ++m4trace:configure.ac:1: -1- m4_pattern_allow([^ECHO_N$]) ++m4trace:configure.ac:1: -1- AC_SUBST([ECHO_T]) ++m4trace:configure.ac:1: -1- AC_SUBST_TRACE([ECHO_T]) ++m4trace:configure.ac:1: -1- m4_pattern_allow([^ECHO_T$]) ++m4trace:configure.ac:1: -1- AC_SUBST([LIBS]) ++m4trace:configure.ac:1: -1- AC_SUBST_TRACE([LIBS]) ++m4trace:configure.ac:1: -1- m4_pattern_allow([^LIBS$]) ++m4trace:configure.ac:1: -1- AC_SUBST([build_alias]) ++m4trace:configure.ac:1: -1- AC_SUBST_TRACE([build_alias]) ++m4trace:configure.ac:1: -1- m4_pattern_allow([^build_alias$]) ++m4trace:configure.ac:1: -1- AC_SUBST([host_alias]) ++m4trace:configure.ac:1: -1- AC_SUBST_TRACE([host_alias]) ++m4trace:configure.ac:1: -1- m4_pattern_allow([^host_alias$]) ++m4trace:configure.ac:1: -1- AC_SUBST([target_alias]) ++m4trace:configure.ac:1: -1- AC_SUBST_TRACE([target_alias]) ++m4trace:configure.ac:1: -1- m4_pattern_allow([^target_alias$]) ++m4trace:configure.ac:2: -1- AM_INIT_AUTOMAKE([-Wall -Werror foreign]) ++m4trace:configure.ac:2: -1- m4_pattern_allow([^AM_[A-Z]+FLAGS$]) ++m4trace:configure.ac:2: -1- AM_AUTOMAKE_VERSION([1.11.1]) ++m4trace:configure.ac:2: -1- AC_REQUIRE_AUX_FILE([install-sh]) ++m4trace:configure.ac:2: -1- AC_SUBST([INSTALL_PROGRAM]) ++m4trace:configure.ac:2: -1- AC_SUBST_TRACE([INSTALL_PROGRAM]) ++m4trace:configure.ac:2: -1- m4_pattern_allow([^INSTALL_PROGRAM$]) ++m4trace:configure.ac:2: -1- AC_SUBST([INSTALL_SCRIPT]) ++m4trace:configure.ac:2: -1- AC_SUBST_TRACE([INSTALL_SCRIPT]) ++m4trace:configure.ac:2: -1- m4_pattern_allow([^INSTALL_SCRIPT$]) ++m4trace:configure.ac:2: -1- AC_SUBST([INSTALL_DATA]) ++m4trace:configure.ac:2: -1- AC_SUBST_TRACE([INSTALL_DATA]) ++m4trace:configure.ac:2: -1- m4_pattern_allow([^INSTALL_DATA$]) ++m4trace:configure.ac:2: -1- AC_SUBST([am__isrc], [' -I$(srcdir)']) ++m4trace:configure.ac:2: -1- AC_SUBST_TRACE([am__isrc]) ++m4trace:configure.ac:2: -1- m4_pattern_allow([^am__isrc$]) ++m4trace:configure.ac:2: -1- _AM_SUBST_NOTMAKE([am__isrc]) ++m4trace:configure.ac:2: -1- AC_SUBST([CYGPATH_W]) ++m4trace:configure.ac:2: -1- AC_SUBST_TRACE([CYGPATH_W]) ++m4trace:configure.ac:2: -1- m4_pattern_allow([^CYGPATH_W$]) ++m4trace:configure.ac:2: -1- AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME']) ++m4trace:configure.ac:2: -1- AC_SUBST_TRACE([PACKAGE]) ++m4trace:configure.ac:2: -1- m4_pattern_allow([^PACKAGE$]) ++m4trace:configure.ac:2: -1- AC_SUBST([VERSION], ['AC_PACKAGE_VERSION']) ++m4trace:configure.ac:2: -1- AC_SUBST_TRACE([VERSION]) ++m4trace:configure.ac:2: -1- m4_pattern_allow([^VERSION$]) ++m4trace:configure.ac:2: -1- AC_DEFINE_TRACE_LITERAL([PACKAGE]) ++m4trace:configure.ac:2: -1- m4_pattern_allow([^PACKAGE$]) ++m4trace:configure.ac:2: -1- AH_OUTPUT([PACKAGE], [/* Name of package */ ++@%:@undef PACKAGE]) ++m4trace:configure.ac:2: -1- AC_DEFINE_TRACE_LITERAL([VERSION]) ++m4trace:configure.ac:2: -1- m4_pattern_allow([^VERSION$]) ++m4trace:configure.ac:2: -1- AH_OUTPUT([VERSION], [/* Version number of package */ ++@%:@undef VERSION]) ++m4trace:configure.ac:2: -1- AC_REQUIRE_AUX_FILE([missing]) ++m4trace:configure.ac:2: -1- AC_SUBST([ACLOCAL]) ++m4trace:configure.ac:2: -1- AC_SUBST_TRACE([ACLOCAL]) ++m4trace:configure.ac:2: -1- m4_pattern_allow([^ACLOCAL$]) ++m4trace:configure.ac:2: -1- AC_SUBST([AUTOCONF]) ++m4trace:configure.ac:2: -1- AC_SUBST_TRACE([AUTOCONF]) ++m4trace:configure.ac:2: -1- m4_pattern_allow([^AUTOCONF$]) ++m4trace:configure.ac:2: -1- AC_SUBST([AUTOMAKE]) ++m4trace:configure.ac:2: -1- AC_SUBST_TRACE([AUTOMAKE]) ++m4trace:configure.ac:2: -1- m4_pattern_allow([^AUTOMAKE$]) ++m4trace:configure.ac:2: -1- AC_SUBST([AUTOHEADER]) ++m4trace:configure.ac:2: -1- AC_SUBST_TRACE([AUTOHEADER]) ++m4trace:configure.ac:2: -1- m4_pattern_allow([^AUTOHEADER$]) ++m4trace:configure.ac:2: -1- AC_SUBST([MAKEINFO]) ++m4trace:configure.ac:2: -1- AC_SUBST_TRACE([MAKEINFO]) ++m4trace:configure.ac:2: -1- m4_pattern_allow([^MAKEINFO$]) ++m4trace:configure.ac:2: -1- AC_SUBST([install_sh]) ++m4trace:configure.ac:2: -1- AC_SUBST_TRACE([install_sh]) ++m4trace:configure.ac:2: -1- m4_pattern_allow([^install_sh$]) ++m4trace:configure.ac:2: -1- AC_SUBST([STRIP]) ++m4trace:configure.ac:2: -1- AC_SUBST_TRACE([STRIP]) ++m4trace:configure.ac:2: -1- m4_pattern_allow([^STRIP$]) ++m4trace:configure.ac:2: -1- AC_SUBST([INSTALL_STRIP_PROGRAM]) ++m4trace:configure.ac:2: -1- AC_SUBST_TRACE([INSTALL_STRIP_PROGRAM]) ++m4trace:configure.ac:2: -1- m4_pattern_allow([^INSTALL_STRIP_PROGRAM$]) ++m4trace:configure.ac:2: -1- AC_REQUIRE_AUX_FILE([install-sh]) ++m4trace:configure.ac:2: -1- AC_SUBST([MKDIR_P]) ++m4trace:configure.ac:2: -1- AC_SUBST_TRACE([MKDIR_P]) ++m4trace:configure.ac:2: -1- m4_pattern_allow([^MKDIR_P$]) ++m4trace:configure.ac:2: -1- AC_SUBST([mkdir_p], ["$MKDIR_P"]) ++m4trace:configure.ac:2: -1- AC_SUBST_TRACE([mkdir_p]) ++m4trace:configure.ac:2: -1- m4_pattern_allow([^mkdir_p$]) ++m4trace:configure.ac:2: -1- AC_SUBST([AWK]) ++m4trace:configure.ac:2: -1- AC_SUBST_TRACE([AWK]) ++m4trace:configure.ac:2: -1- m4_pattern_allow([^AWK$]) ++m4trace:configure.ac:2: -1- AC_SUBST([SET_MAKE]) ++m4trace:configure.ac:2: -1- AC_SUBST_TRACE([SET_MAKE]) ++m4trace:configure.ac:2: -1- m4_pattern_allow([^SET_MAKE$]) ++m4trace:configure.ac:2: -1- AC_SUBST([am__leading_dot]) ++m4trace:configure.ac:2: -1- AC_SUBST_TRACE([am__leading_dot]) ++m4trace:configure.ac:2: -1- m4_pattern_allow([^am__leading_dot$]) ++m4trace:configure.ac:2: -1- AC_SUBST([AMTAR]) ++m4trace:configure.ac:2: -1- AC_SUBST_TRACE([AMTAR]) ++m4trace:configure.ac:2: -1- m4_pattern_allow([^AMTAR$]) ++m4trace:configure.ac:2: -1- AC_SUBST([am__tar]) ++m4trace:configure.ac:2: -1- AC_SUBST_TRACE([am__tar]) ++m4trace:configure.ac:2: -1- m4_pattern_allow([^am__tar$]) ++m4trace:configure.ac:2: -1- AC_SUBST([am__untar]) ++m4trace:configure.ac:2: -1- AC_SUBST_TRACE([am__untar]) ++m4trace:configure.ac:2: -1- m4_pattern_allow([^am__untar$]) ++m4trace:configure.ac:4: -1- AC_SUBST([CC]) ++m4trace:configure.ac:4: -1- AC_SUBST_TRACE([CC]) ++m4trace:configure.ac:4: -1- m4_pattern_allow([^CC$]) ++m4trace:configure.ac:4: -1- AC_SUBST([CFLAGS]) ++m4trace:configure.ac:4: -1- AC_SUBST_TRACE([CFLAGS]) ++m4trace:configure.ac:4: -1- m4_pattern_allow([^CFLAGS$]) ++m4trace:configure.ac:4: -1- AC_SUBST([LDFLAGS]) ++m4trace:configure.ac:4: -1- AC_SUBST_TRACE([LDFLAGS]) ++m4trace:configure.ac:4: -1- m4_pattern_allow([^LDFLAGS$]) ++m4trace:configure.ac:4: -1- AC_SUBST([LIBS]) ++m4trace:configure.ac:4: -1- AC_SUBST_TRACE([LIBS]) ++m4trace:configure.ac:4: -1- m4_pattern_allow([^LIBS$]) ++m4trace:configure.ac:4: -1- AC_SUBST([CPPFLAGS]) ++m4trace:configure.ac:4: -1- AC_SUBST_TRACE([CPPFLAGS]) ++m4trace:configure.ac:4: -1- m4_pattern_allow([^CPPFLAGS$]) ++m4trace:configure.ac:4: -1- AC_SUBST([CC]) ++m4trace:configure.ac:4: -1- AC_SUBST_TRACE([CC]) ++m4trace:configure.ac:4: -1- m4_pattern_allow([^CC$]) ++m4trace:configure.ac:4: -1- AC_SUBST([CC]) ++m4trace:configure.ac:4: -1- AC_SUBST_TRACE([CC]) ++m4trace:configure.ac:4: -1- m4_pattern_allow([^CC$]) ++m4trace:configure.ac:4: -1- AC_SUBST([CC]) ++m4trace:configure.ac:4: -1- AC_SUBST_TRACE([CC]) ++m4trace:configure.ac:4: -1- m4_pattern_allow([^CC$]) ++m4trace:configure.ac:4: -1- AC_SUBST([CC]) ++m4trace:configure.ac:4: -1- AC_SUBST_TRACE([CC]) ++m4trace:configure.ac:4: -1- m4_pattern_allow([^CC$]) ++m4trace:configure.ac:4: -1- AC_SUBST([ac_ct_CC]) ++m4trace:configure.ac:4: -1- AC_SUBST_TRACE([ac_ct_CC]) ++m4trace:configure.ac:4: -1- m4_pattern_allow([^ac_ct_CC$]) ++m4trace:configure.ac:4: -1- AC_SUBST([EXEEXT], [$ac_cv_exeext]) ++m4trace:configure.ac:4: -1- AC_SUBST_TRACE([EXEEXT]) ++m4trace:configure.ac:4: -1- m4_pattern_allow([^EXEEXT$]) ++m4trace:configure.ac:4: -1- AC_SUBST([OBJEXT], [$ac_cv_objext]) ++m4trace:configure.ac:4: -1- AC_SUBST_TRACE([OBJEXT]) ++m4trace:configure.ac:4: -1- m4_pattern_allow([^OBJEXT$]) ++m4trace:configure.ac:4: -1- AC_SUBST([DEPDIR], ["${am__leading_dot}deps"]) ++m4trace:configure.ac:4: -1- AC_SUBST_TRACE([DEPDIR]) ++m4trace:configure.ac:4: -1- m4_pattern_allow([^DEPDIR$]) ++m4trace:configure.ac:4: -1- AC_SUBST([am__include]) ++m4trace:configure.ac:4: -1- AC_SUBST_TRACE([am__include]) ++m4trace:configure.ac:4: -1- m4_pattern_allow([^am__include$]) ++m4trace:configure.ac:4: -1- AC_SUBST([am__quote]) ++m4trace:configure.ac:4: -1- AC_SUBST_TRACE([am__quote]) ++m4trace:configure.ac:4: -1- m4_pattern_allow([^am__quote$]) ++m4trace:configure.ac:4: -1- AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) ++m4trace:configure.ac:4: -1- AC_SUBST([AMDEP_TRUE]) ++m4trace:configure.ac:4: -1- AC_SUBST_TRACE([AMDEP_TRUE]) ++m4trace:configure.ac:4: -1- m4_pattern_allow([^AMDEP_TRUE$]) ++m4trace:configure.ac:4: -1- AC_SUBST([AMDEP_FALSE]) ++m4trace:configure.ac:4: -1- AC_SUBST_TRACE([AMDEP_FALSE]) ++m4trace:configure.ac:4: -1- m4_pattern_allow([^AMDEP_FALSE$]) ++m4trace:configure.ac:4: -1- _AM_SUBST_NOTMAKE([AMDEP_TRUE]) ++m4trace:configure.ac:4: -1- _AM_SUBST_NOTMAKE([AMDEP_FALSE]) ++m4trace:configure.ac:4: -1- AC_SUBST([AMDEPBACKSLASH]) ++m4trace:configure.ac:4: -1- AC_SUBST_TRACE([AMDEPBACKSLASH]) ++m4trace:configure.ac:4: -1- m4_pattern_allow([^AMDEPBACKSLASH$]) ++m4trace:configure.ac:4: -1- _AM_SUBST_NOTMAKE([AMDEPBACKSLASH]) ++m4trace:configure.ac:4: -1- AC_SUBST([CCDEPMODE], [depmode=$am_cv_CC_dependencies_compiler_type]) ++m4trace:configure.ac:4: -1- AC_SUBST_TRACE([CCDEPMODE]) ++m4trace:configure.ac:4: -1- m4_pattern_allow([^CCDEPMODE$]) ++m4trace:configure.ac:4: -1- AM_CONDITIONAL([am__fastdepCC], [ ++ test "x$enable_dependency_tracking" != xno \ ++ && test "$am_cv_CC_dependencies_compiler_type" = gcc3]) ++m4trace:configure.ac:4: -1- AC_SUBST([am__fastdepCC_TRUE]) ++m4trace:configure.ac:4: -1- AC_SUBST_TRACE([am__fastdepCC_TRUE]) ++m4trace:configure.ac:4: -1- m4_pattern_allow([^am__fastdepCC_TRUE$]) ++m4trace:configure.ac:4: -1- AC_SUBST([am__fastdepCC_FALSE]) ++m4trace:configure.ac:4: -1- AC_SUBST_TRACE([am__fastdepCC_FALSE]) ++m4trace:configure.ac:4: -1- m4_pattern_allow([^am__fastdepCC_FALSE$]) ++m4trace:configure.ac:4: -1- _AM_SUBST_NOTMAKE([am__fastdepCC_TRUE]) ++m4trace:configure.ac:4: -1- _AM_SUBST_NOTMAKE([am__fastdepCC_FALSE]) ++m4trace:configure.ac:5: -1- AM_PROG_CC_C_O ++m4trace:configure.ac:5: -1- AC_DEFINE_TRACE_LITERAL([NO_MINUS_C_MINUS_O]) ++m4trace:configure.ac:5: -1- m4_pattern_allow([^NO_MINUS_C_MINUS_O$]) ++m4trace:configure.ac:5: -1- AH_OUTPUT([NO_MINUS_C_MINUS_O], [/* Define to 1 if your C compiler doesn\'t accept -c and -o together. */ ++@%:@undef NO_MINUS_C_MINUS_O]) ++m4trace:configure.ac:5: -1- AC_REQUIRE_AUX_FILE([compile]) ++m4trace:configure.ac:7: -1- m4_pattern_forbid([^_?PKG_[A-Z_]+$]) ++m4trace:configure.ac:7: -1- m4_pattern_allow([^PKG_CONFIG(_(PATH|LIBDIR|SYSROOT_DIR|ALLOW_SYSTEM_(CFLAGS|LIBS)))?$]) ++m4trace:configure.ac:7: -1- m4_pattern_allow([^PKG_CONFIG_(DISABLE_UNINSTALLED|TOP_BUILD_DIR|DEBUG_SPEW)$]) ++m4trace:configure.ac:7: -1- AC_SUBST([PKG_CONFIG]) ++m4trace:configure.ac:7: -1- AC_SUBST_TRACE([PKG_CONFIG]) ++m4trace:configure.ac:7: -1- m4_pattern_allow([^PKG_CONFIG$]) ++m4trace:configure.ac:7: -1- AC_SUBST([PKG_CONFIG_PATH]) ++m4trace:configure.ac:7: -1- AC_SUBST_TRACE([PKG_CONFIG_PATH]) ++m4trace:configure.ac:7: -1- m4_pattern_allow([^PKG_CONFIG_PATH$]) ++m4trace:configure.ac:7: -1- AC_SUBST([PKG_CONFIG_LIBDIR]) ++m4trace:configure.ac:7: -1- AC_SUBST_TRACE([PKG_CONFIG_LIBDIR]) ++m4trace:configure.ac:7: -1- m4_pattern_allow([^PKG_CONFIG_LIBDIR$]) ++m4trace:configure.ac:7: -1- AC_SUBST([PKG_CONFIG]) ++m4trace:configure.ac:7: -1- AC_SUBST_TRACE([PKG_CONFIG]) ++m4trace:configure.ac:7: -1- m4_pattern_allow([^PKG_CONFIG$]) ++m4trace:configure.ac:7: -1- AC_SUBST([HBAAPI_CFLAGS]) ++m4trace:configure.ac:7: -1- AC_SUBST_TRACE([HBAAPI_CFLAGS]) ++m4trace:configure.ac:7: -1- m4_pattern_allow([^HBAAPI_CFLAGS$]) ++m4trace:configure.ac:7: -1- AC_SUBST([HBAAPI_LIBS]) ++m4trace:configure.ac:7: -1- AC_SUBST_TRACE([HBAAPI_LIBS]) ++m4trace:configure.ac:7: -1- m4_pattern_allow([^HBAAPI_LIBS$]) ++m4trace:configure.ac:8: -1- AC_SUBST([HBAAPI_CFLAGS]) ++m4trace:configure.ac:8: -1- AC_SUBST_TRACE([HBAAPI_CFLAGS]) ++m4trace:configure.ac:8: -1- m4_pattern_allow([^HBAAPI_CFLAGS$]) ++m4trace:configure.ac:9: -1- AC_SUBST([HBAAPI_LIBS]) ++m4trace:configure.ac:9: -1- AC_SUBST_TRACE([HBAAPI_LIBS]) ++m4trace:configure.ac:9: -1- m4_pattern_allow([^HBAAPI_LIBS$]) ++m4trace:configure.ac:16: -1- AM_CONDITIONAL([WITH_DCB], [test "X$with_dcb" != Xno]) ++m4trace:configure.ac:16: -1- AC_SUBST([WITH_DCB_TRUE]) ++m4trace:configure.ac:16: -1- AC_SUBST_TRACE([WITH_DCB_TRUE]) ++m4trace:configure.ac:16: -1- m4_pattern_allow([^WITH_DCB_TRUE$]) ++m4trace:configure.ac:16: -1- AC_SUBST([WITH_DCB_FALSE]) ++m4trace:configure.ac:16: -1- AC_SUBST_TRACE([WITH_DCB_FALSE]) ++m4trace:configure.ac:16: -1- m4_pattern_allow([^WITH_DCB_FALSE$]) ++m4trace:configure.ac:16: -1- _AM_SUBST_NOTMAKE([WITH_DCB_TRUE]) ++m4trace:configure.ac:16: -1- _AM_SUBST_NOTMAKE([WITH_DCB_FALSE]) ++m4trace:configure.ac:18: -1- AC_SUBST([DCBD_CFLAGS]) ++m4trace:configure.ac:18: -1- AC_SUBST_TRACE([DCBD_CFLAGS]) ++m4trace:configure.ac:18: -1- m4_pattern_allow([^DCBD_CFLAGS$]) ++m4trace:configure.ac:18: -1- AC_SUBST([DCBD_LIBS]) ++m4trace:configure.ac:18: -1- AC_SUBST_TRACE([DCBD_LIBS]) ++m4trace:configure.ac:18: -1- m4_pattern_allow([^DCBD_LIBS$]) ++m4trace:configure.ac:18: -1- AC_SUBST([DCBD_CFLAGS]) ++m4trace:configure.ac:18: -1- AC_SUBST_TRACE([DCBD_CFLAGS]) ++m4trace:configure.ac:18: -1- m4_pattern_allow([^DCBD_CFLAGS$]) ++m4trace:configure.ac:22: -1- AC_CONFIG_FILES([Makefile fcoeplumb fcoe-utils.spec fcoe_utils.h]) ++m4trace:configure.ac:23: -1- AC_SUBST([LIB@&t@OBJS], [$ac_libobjs]) ++m4trace:configure.ac:23: -1- AC_SUBST_TRACE([LIB@&t@OBJS]) ++m4trace:configure.ac:23: -1- m4_pattern_allow([^LIB@&t@OBJS$]) ++m4trace:configure.ac:23: -1- AC_SUBST([LTLIBOBJS], [$ac_ltlibobjs]) ++m4trace:configure.ac:23: -1- AC_SUBST_TRACE([LTLIBOBJS]) ++m4trace:configure.ac:23: -1- m4_pattern_allow([^LTLIBOBJS$]) ++m4trace:configure.ac:23: -1- AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"]) ++m4trace:configure.ac:23: -1- AC_SUBST([am__EXEEXT_TRUE]) ++m4trace:configure.ac:23: -1- AC_SUBST_TRACE([am__EXEEXT_TRUE]) ++m4trace:configure.ac:23: -1- m4_pattern_allow([^am__EXEEXT_TRUE$]) ++m4trace:configure.ac:23: -1- AC_SUBST([am__EXEEXT_FALSE]) ++m4trace:configure.ac:23: -1- AC_SUBST_TRACE([am__EXEEXT_FALSE]) ++m4trace:configure.ac:23: -1- m4_pattern_allow([^am__EXEEXT_FALSE$]) ++m4trace:configure.ac:23: -1- _AM_SUBST_NOTMAKE([am__EXEEXT_TRUE]) ++m4trace:configure.ac:23: -1- _AM_SUBST_NOTMAKE([am__EXEEXT_FALSE]) ++m4trace:configure.ac:23: -1- AC_SUBST_TRACE([top_builddir]) ++m4trace:configure.ac:23: -1- AC_SUBST_TRACE([top_build_prefix]) ++m4trace:configure.ac:23: -1- AC_SUBST_TRACE([srcdir]) ++m4trace:configure.ac:23: -1- AC_SUBST_TRACE([abs_srcdir]) ++m4trace:configure.ac:23: -1- AC_SUBST_TRACE([top_srcdir]) ++m4trace:configure.ac:23: -1- AC_SUBST_TRACE([abs_top_srcdir]) ++m4trace:configure.ac:23: -1- AC_SUBST_TRACE([builddir]) ++m4trace:configure.ac:23: -1- AC_SUBST_TRACE([abs_builddir]) ++m4trace:configure.ac:23: -1- AC_SUBST_TRACE([abs_top_builddir]) ++m4trace:configure.ac:23: -1- AC_SUBST_TRACE([INSTALL]) ++m4trace:configure.ac:23: -1- AC_SUBST_TRACE([MKDIR_P]) +diff -Nur -x '*.orig' -x '*~' fcoe-utils-1.0.9//configure fcoe-utils-1.0.9.new//configure +--- fcoe-utils-1.0.9//configure 2010-02-16 14:43:07.000000000 -0500 ++++ fcoe-utils-1.0.9.new//configure 2011-09-14 11:57:05.000000000 -0400 +@@ -1,13 +1,13 @@ + #! /bin/sh + # Guess values for system-dependent variables and create Makefiles. +-# Generated by GNU Autoconf 2.65 for fcoe-utils 1.0.9. ++# Generated by GNU Autoconf 2.68 for fcoe-utils 1.0.9. + # + # Report bugs to . + # + # + # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, +-# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, +-# Inc. ++# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software ++# Foundation, Inc. + # + # + # This configure script is free software; the Free Software Foundation +@@ -91,6 +91,7 @@ + IFS=" "" $as_nl" + + # Find who we are. Look in the path if we contain no directory separator. ++as_myself= + case $0 in #(( + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +@@ -215,11 +216,18 @@ + # We cannot yet assume a decent shell, so we have to provide a + # neutralization value for shells without unset; and this also + # works around shells that cannot unset nonexistent variables. ++ # Preserve -v and -x to the replacement shell. + BASH_ENV=/dev/null + ENV=/dev/null + (unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV + export CONFIG_SHELL +- exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"} ++ case $- in # (((( ++ *v*x* | *x*v* ) as_opts=-vx ;; ++ *v* ) as_opts=-v ;; ++ *x* ) as_opts=-x ;; ++ * ) as_opts= ;; ++ esac ++ exec "$CONFIG_SHELL" $as_opts "$as_myself" ${1+"$@"} + fi + + if test x$as_have_required = xno; then : +@@ -318,7 +326,7 @@ + test -d "$as_dir" && break + done + test -z "$as_dirs" || eval "mkdir $as_dirs" +- } || test -d "$as_dir" || as_fn_error "cannot create directory $as_dir" ++ } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" + + + } # as_fn_mkdir_p +@@ -358,19 +366,19 @@ + fi # as_fn_arith + + +-# as_fn_error ERROR [LINENO LOG_FD] +-# --------------------------------- ++# as_fn_error STATUS ERROR [LINENO LOG_FD] ++# ---------------------------------------- + # Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are + # provided, also output the error to LOG_FD, referencing LINENO. Then exit the +-# script with status $?, using 1 if that was 0. ++# script with STATUS, using 1 if that was 0. + as_fn_error () + { +- as_status=$?; test $as_status -eq 0 && as_status=1 +- if test "$3"; then +- as_lineno=${as_lineno-"$2"} as_lineno_stack=as_lineno_stack=$as_lineno_stack +- $as_echo "$as_me:${as_lineno-$LINENO}: error: $1" >&$3 ++ as_status=$1; test $as_status -eq 0 && as_status=1 ++ if test "$4"; then ++ as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack ++ $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 + fi +- $as_echo "$as_me: error: $1" >&2 ++ $as_echo "$as_me: error: $2" >&2 + as_fn_exit $as_status + } # as_fn_error + +@@ -532,7 +540,7 @@ + exec 6>&1 + + # Name of the host. +-# hostname on some systems (SVR3.2, Linux) returns a bogus exit status, ++# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status, + # so uname gets run too. + ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` + +@@ -566,6 +574,8 @@ + WITH_DCB_TRUE + HBAAPI_LIBS + HBAAPI_CFLAGS ++PKG_CONFIG_LIBDIR ++PKG_CONFIG_PATH + PKG_CONFIG + am__fastdepCC_FALSE + am__fastdepCC_TRUE +@@ -659,6 +669,8 @@ + LIBS + CPPFLAGS + PKG_CONFIG ++PKG_CONFIG_PATH ++PKG_CONFIG_LIBDIR + HBAAPI_CFLAGS + HBAAPI_LIBS + DCBD_CFLAGS +@@ -725,8 +737,9 @@ + fi + + case $ac_option in +- *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; +- *) ac_optarg=yes ;; ++ *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; ++ *=) ac_optarg= ;; ++ *) ac_optarg=yes ;; + esac + + # Accept the important Cygnus configure options, so we can diagnose typos. +@@ -771,7 +784,7 @@ + ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && +- as_fn_error "invalid feature name: $ac_useropt" ++ as_fn_error $? "invalid feature name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in +@@ -797,7 +810,7 @@ + ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && +- as_fn_error "invalid feature name: $ac_useropt" ++ as_fn_error $? "invalid feature name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in +@@ -1001,7 +1014,7 @@ + ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && +- as_fn_error "invalid package name: $ac_useropt" ++ as_fn_error $? "invalid package name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in +@@ -1017,7 +1030,7 @@ + ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && +- as_fn_error "invalid package name: $ac_useropt" ++ as_fn_error $? "invalid package name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in +@@ -1047,8 +1060,8 @@ + | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) + x_libraries=$ac_optarg ;; + +- -*) as_fn_error "unrecognized option: \`$ac_option' +-Try \`$0 --help' for more information." ++ -*) as_fn_error $? "unrecognized option: \`$ac_option' ++Try \`$0 --help' for more information" + ;; + + *=*) +@@ -1056,7 +1069,7 @@ + # Reject names that are not valid shell variable names. + case $ac_envvar in #( + '' | [0-9]* | *[!_$as_cr_alnum]* ) +- as_fn_error "invalid variable name: \`$ac_envvar'" ;; ++ as_fn_error $? "invalid variable name: \`$ac_envvar'" ;; + esac + eval $ac_envvar=\$ac_optarg + export $ac_envvar ;; +@@ -1066,7 +1079,7 @@ + $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2 + expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && + $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2 +- : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option} ++ : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}" + ;; + + esac +@@ -1074,13 +1087,13 @@ + + if test -n "$ac_prev"; then + ac_option=--`echo $ac_prev | sed 's/_/-/g'` +- as_fn_error "missing argument to $ac_option" ++ as_fn_error $? "missing argument to $ac_option" + fi + + if test -n "$ac_unrecognized_opts"; then + case $enable_option_checking in + no) ;; +- fatal) as_fn_error "unrecognized options: $ac_unrecognized_opts" ;; ++ fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;; + *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;; + esac + fi +@@ -1103,7 +1116,7 @@ + [\\/$]* | ?:[\\/]* ) continue;; + NONE | '' ) case $ac_var in *prefix ) continue;; esac;; + esac +- as_fn_error "expected an absolute directory name for --$ac_var: $ac_val" ++ as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val" + done + + # There might be people who depend on the old broken behavior: `$host' +@@ -1117,8 +1130,8 @@ + if test "x$host_alias" != x; then + if test "x$build_alias" = x; then + cross_compiling=maybe +- $as_echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host. +- If a cross compiler is detected then cross compile mode will be used." >&2 ++ $as_echo "$as_me: WARNING: if you wanted to set the --build type, don't use --host. ++ If a cross compiler is detected then cross compile mode will be used" >&2 + elif test "x$build_alias" != "x$host_alias"; then + cross_compiling=yes + fi +@@ -1133,9 +1146,9 @@ + ac_pwd=`pwd` && test -n "$ac_pwd" && + ac_ls_di=`ls -di .` && + ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || +- as_fn_error "working directory cannot be determined" ++ as_fn_error $? "working directory cannot be determined" + test "X$ac_ls_di" = "X$ac_pwd_ls_di" || +- as_fn_error "pwd does not report name of working directory" ++ as_fn_error $? "pwd does not report name of working directory" + + + # Find the source files, if location was not specified. +@@ -1174,11 +1187,11 @@ + fi + if test ! -r "$srcdir/$ac_unique_file"; then + test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." +- as_fn_error "cannot find sources ($ac_unique_file) in $srcdir" ++ as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir" + fi + ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" + ac_abs_confdir=`( +- cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error "$ac_msg" ++ cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg" + pwd)` + # When building in place, set srcdir=. + if test "$ac_abs_confdir" = "$ac_pwd"; then +@@ -1218,7 +1231,7 @@ + --help=short display options specific to this package + --help=recursive display the short help of all the included packages + -V, --version display version information and exit +- -q, --quiet, --silent do not print \`checking...' messages ++ -q, --quiet, --silent do not print \`checking ...' messages + --cache-file=FILE cache test results in FILE [disabled] + -C, --config-cache alias for \`--cache-file=config.cache' + -n, --no-create do not create output files +@@ -1295,6 +1308,10 @@ + CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I if + you have headers in a nonstandard directory + PKG_CONFIG path to pkg-config utility ++ PKG_CONFIG_PATH ++ directories to add to pkg-config's search path ++ PKG_CONFIG_LIBDIR ++ path overriding pkg-config's built-in search path + HBAAPI_CFLAGS + C compiler flags for HBAAPI, overriding pkg-config + HBAAPI_LIBS linker flags for HBAAPI, overriding pkg-config +@@ -1368,9 +1385,9 @@ + if $ac_init_version; then + cat <<\_ACEOF + fcoe-utils configure 1.0.9 +-generated by GNU Autoconf 2.65 ++generated by GNU Autoconf 2.68 + +-Copyright (C) 2009 Free Software Foundation, Inc. ++Copyright (C) 2010 Free Software Foundation, Inc. + This configure script is free software; the Free Software Foundation + gives unlimited permission to copy, distribute and modify it. + _ACEOF +@@ -1414,7 +1431,7 @@ + + ac_retval=1 + fi +- eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} ++ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval + + } # ac_fn_c_try_compile +@@ -1423,7 +1440,7 @@ + running configure, to aid debugging if configure makes a mistake. + + It was created by fcoe-utils $as_me 1.0.9, which was +-generated by GNU Autoconf 2.65. Invocation command line was ++generated by GNU Autoconf 2.68. Invocation command line was + + $ $0 $@ + +@@ -1533,11 +1550,9 @@ + { + echo + +- cat <<\_ASBOX +-## ---------------- ## ++ $as_echo "## ---------------- ## + ## Cache variables. ## +-## ---------------- ## +-_ASBOX ++## ---------------- ##" + echo + # The following way of writing the cache mishandles newlines in values, + ( +@@ -1571,11 +1586,9 @@ + ) + echo + +- cat <<\_ASBOX +-## ----------------- ## ++ $as_echo "## ----------------- ## + ## Output variables. ## +-## ----------------- ## +-_ASBOX ++## ----------------- ##" + echo + for ac_var in $ac_subst_vars + do +@@ -1588,11 +1601,9 @@ + echo + + if test -n "$ac_subst_files"; then +- cat <<\_ASBOX +-## ------------------- ## ++ $as_echo "## ------------------- ## + ## File substitutions. ## +-## ------------------- ## +-_ASBOX ++## ------------------- ##" + echo + for ac_var in $ac_subst_files + do +@@ -1606,11 +1617,9 @@ + fi + + if test -s confdefs.h; then +- cat <<\_ASBOX +-## ----------- ## ++ $as_echo "## ----------- ## + ## confdefs.h. ## +-## ----------- ## +-_ASBOX ++## ----------- ##" + echo + cat confdefs.h + echo +@@ -1665,7 +1674,12 @@ + ac_site_file1=NONE + ac_site_file2=NONE + if test -n "$CONFIG_SITE"; then +- ac_site_file1=$CONFIG_SITE ++ # We do not want a PATH search for config.site. ++ case $CONFIG_SITE in #(( ++ -*) ac_site_file1=./$CONFIG_SITE;; ++ */*) ac_site_file1=$CONFIG_SITE;; ++ *) ac_site_file1=./$CONFIG_SITE;; ++ esac + elif test "x$prefix" != xNONE; then + ac_site_file1=$prefix/share/config.site + ac_site_file2=$prefix/etc/config.site +@@ -1680,7 +1694,11 @@ + { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5 + $as_echo "$as_me: loading site script $ac_site_file" >&6;} + sed 's/^/| /' "$ac_site_file" >&5 +- . "$ac_site_file" ++ . "$ac_site_file" \ ++ || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 ++$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} ++as_fn_error $? "failed to load site script $ac_site_file ++See \`config.log' for more details" "$LINENO" 5; } + fi + done + +@@ -1756,7 +1774,7 @@ + $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5 + $as_echo "$as_me: error: changes in the environment can compromise the build" >&2;} +- as_fn_error "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5 ++ as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5 + fi + ## -------------------- ## + ## Main body of script. ## +@@ -1773,16 +1791,22 @@ + + ac_aux_dir= + for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do +- for ac_t in install-sh install.sh shtool; do +- if test -f "$ac_dir/$ac_t"; then +- ac_aux_dir=$ac_dir +- ac_install_sh="$ac_aux_dir/$ac_t -c" +- break 2 +- fi +- done ++ if test -f "$ac_dir/install-sh"; then ++ ac_aux_dir=$ac_dir ++ ac_install_sh="$ac_aux_dir/install-sh -c" ++ break ++ elif test -f "$ac_dir/install.sh"; then ++ ac_aux_dir=$ac_dir ++ ac_install_sh="$ac_aux_dir/install.sh -c" ++ break ++ elif test -f "$ac_dir/shtool"; then ++ ac_aux_dir=$ac_dir ++ ac_install_sh="$ac_aux_dir/shtool install -c" ++ break ++ fi + done + if test -z "$ac_aux_dir"; then +- as_fn_error "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5 ++ as_fn_error $? "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5 + fi + + # These three variables are undocumented and unsupported, +@@ -1811,7 +1835,7 @@ + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5 + $as_echo_n "checking for a BSD-compatible install... " >&6; } + if test -z "$INSTALL"; then +-if test "${ac_cv_path_install+set}" = set; then : ++if ${ac_cv_path_install+:} false; then : + $as_echo_n "(cached) " >&6 + else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +@@ -1898,11 +1922,11 @@ + ' + case `pwd` in + *[\\\"\#\$\&\'\`$am_lf]*) +- as_fn_error "unsafe absolute working directory name" "$LINENO" 5;; ++ as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;; + esac + case $srcdir in + *[\\\"\#\$\&\'\`$am_lf\ \ ]*) +- as_fn_error "unsafe srcdir value: \`$srcdir'" "$LINENO" 5;; ++ as_fn_error $? "unsafe srcdir value: \`$srcdir'" "$LINENO" 5;; + esac + + # Do `set' in a subshell so we don't clobber the current shell's +@@ -1924,7 +1948,7 @@ + # if, for instance, CONFIG_SHELL is bash and it inherits a + # broken ls alias from the environment. This has actually + # happened. Such a system could not be considered "sane". +- as_fn_error "ls -t appears to fail. Make sure there is not a broken ++ as_fn_error $? "ls -t appears to fail. Make sure there is not a broken + alias in your environment" "$LINENO" 5 + fi + +@@ -1934,7 +1958,7 @@ + # Ok. + : + else +- as_fn_error "newly created file is older than distributed files! ++ as_fn_error $? "newly created file is older than distributed files! + Check your system clock" "$LINENO" 5 + fi + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +@@ -1988,7 +2012,7 @@ + set dummy ${ac_tool_prefix}strip; ac_word=$2 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 + $as_echo_n "checking for $ac_word... " >&6; } +-if test "${ac_cv_prog_STRIP+set}" = set; then : ++if ${ac_cv_prog_STRIP+:} false; then : + $as_echo_n "(cached) " >&6 + else + if test -n "$STRIP"; then +@@ -2028,7 +2052,7 @@ + set dummy strip; ac_word=$2 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 + $as_echo_n "checking for $ac_word... " >&6; } +-if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then : ++if ${ac_cv_prog_ac_ct_STRIP+:} false; then : + $as_echo_n "(cached) " >&6 + else + if test -n "$ac_ct_STRIP"; then +@@ -2081,7 +2105,7 @@ + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5 + $as_echo_n "checking for a thread-safe mkdir -p... " >&6; } + if test -z "$MKDIR_P"; then +- if test "${ac_cv_path_mkdir+set}" = set; then : ++ if ${ac_cv_path_mkdir+:} false; then : + $as_echo_n "(cached) " >&6 + else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +@@ -2132,7 +2156,7 @@ + set dummy $ac_prog; ac_word=$2 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 + $as_echo_n "checking for $ac_word... " >&6; } +-if test "${ac_cv_prog_AWK+set}" = set; then : ++if ${ac_cv_prog_AWK+:} false; then : + $as_echo_n "(cached) " >&6 + else + if test -n "$AWK"; then +@@ -2172,7 +2196,7 @@ + $as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } + set x ${MAKE-make} + ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` +-if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then : ++if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then : + $as_echo_n "(cached) " >&6 + else + cat >conftest.make <<\_ACEOF +@@ -2180,7 +2204,7 @@ + all: + @echo '@@@%%%=$(MAKE)=@@@%%%' + _ACEOF +-# GNU make sometimes prints "make[1]: Entering...", which would confuse us. ++# GNU make sometimes prints "make[1]: Entering ...", which would confuse us. + case `${MAKE-make} -f conftest.make 2>/dev/null` in + *@@@%%%=?*=@@@%%%*) + eval ac_cv_prog_make_${ac_make}_set=yes;; +@@ -2214,7 +2238,7 @@ + am__isrc=' -I$(srcdir)' + # test to see if srcdir already configured + if test -f $srcdir/config.status; then +- as_fn_error "source directory already configured; run \"make distclean\" there first" "$LINENO" 5 ++ as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5 + fi + fi + +@@ -2281,7 +2305,7 @@ + set dummy ${ac_tool_prefix}gcc; ac_word=$2 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 + $as_echo_n "checking for $ac_word... " >&6; } +-if test "${ac_cv_prog_CC+set}" = set; then : ++if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 + else + if test -n "$CC"; then +@@ -2321,7 +2345,7 @@ + set dummy gcc; ac_word=$2 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 + $as_echo_n "checking for $ac_word... " >&6; } +-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then : ++if ${ac_cv_prog_ac_ct_CC+:} false; then : + $as_echo_n "(cached) " >&6 + else + if test -n "$ac_ct_CC"; then +@@ -2374,7 +2398,7 @@ + set dummy ${ac_tool_prefix}cc; ac_word=$2 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 + $as_echo_n "checking for $ac_word... " >&6; } +-if test "${ac_cv_prog_CC+set}" = set; then : ++if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 + else + if test -n "$CC"; then +@@ -2414,7 +2438,7 @@ + set dummy cc; ac_word=$2 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 + $as_echo_n "checking for $ac_word... " >&6; } +-if test "${ac_cv_prog_CC+set}" = set; then : ++if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 + else + if test -n "$CC"; then +@@ -2473,7 +2497,7 @@ + set dummy $ac_tool_prefix$ac_prog; ac_word=$2 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 + $as_echo_n "checking for $ac_word... " >&6; } +-if test "${ac_cv_prog_CC+set}" = set; then : ++if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 + else + if test -n "$CC"; then +@@ -2517,7 +2541,7 @@ + set dummy $ac_prog; ac_word=$2 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 + $as_echo_n "checking for $ac_word... " >&6; } +-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then : ++if ${ac_cv_prog_ac_ct_CC+:} false; then : + $as_echo_n "(cached) " >&6 + else + if test -n "$ac_ct_CC"; then +@@ -2571,8 +2595,8 @@ + + test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 + $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +-as_fn_error "no acceptable C compiler found in \$PATH +-See \`config.log' for more details." "$LINENO" 5; } ++as_fn_error $? "no acceptable C compiler found in \$PATH ++See \`config.log' for more details" "$LINENO" 5; } + + # Provide some information about the compiler. + $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 +@@ -2686,9 +2710,8 @@ + + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 + $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +-{ as_fn_set_status 77 +-as_fn_error "C compiler cannot create executables +-See \`config.log' for more details." "$LINENO" 5; }; } ++as_fn_error 77 "C compiler cannot create executables ++See \`config.log' for more details" "$LINENO" 5; } + else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 + $as_echo "yes" >&6; } +@@ -2730,8 +2753,8 @@ + else + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 + $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +-as_fn_error "cannot compute suffix of executables: cannot compile and link +-See \`config.log' for more details." "$LINENO" 5; } ++as_fn_error $? "cannot compute suffix of executables: cannot compile and link ++See \`config.log' for more details" "$LINENO" 5; } + fi + rm -f conftest conftest$ac_cv_exeext + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5 +@@ -2788,9 +2811,9 @@ + else + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 + $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +-as_fn_error "cannot run C compiled programs. ++as_fn_error $? "cannot run C compiled programs. + If you meant to cross compile, use \`--host'. +-See \`config.log' for more details." "$LINENO" 5; } ++See \`config.log' for more details" "$LINENO" 5; } + fi + fi + fi +@@ -2801,7 +2824,7 @@ + ac_clean_files=$ac_clean_files_save + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5 + $as_echo_n "checking for suffix of object files... " >&6; } +-if test "${ac_cv_objext+set}" = set; then : ++if ${ac_cv_objext+:} false; then : + $as_echo_n "(cached) " >&6 + else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +@@ -2841,8 +2864,8 @@ + + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 + $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +-as_fn_error "cannot compute suffix of object files: cannot compile +-See \`config.log' for more details." "$LINENO" 5; } ++as_fn_error $? "cannot compute suffix of object files: cannot compile ++See \`config.log' for more details" "$LINENO" 5; } + fi + rm -f conftest.$ac_cv_objext conftest.$ac_ext + fi +@@ -2852,7 +2875,7 @@ + ac_objext=$OBJEXT + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5 + $as_echo_n "checking whether we are using the GNU C compiler... " >&6; } +-if test "${ac_cv_c_compiler_gnu+set}" = set; then : ++if ${ac_cv_c_compiler_gnu+:} false; then : + $as_echo_n "(cached) " >&6 + else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +@@ -2889,7 +2912,7 @@ + ac_save_CFLAGS=$CFLAGS + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 + $as_echo_n "checking whether $CC accepts -g... " >&6; } +-if test "${ac_cv_prog_cc_g+set}" = set; then : ++if ${ac_cv_prog_cc_g+:} false; then : + $as_echo_n "(cached) " >&6 + else + ac_save_c_werror_flag=$ac_c_werror_flag +@@ -2967,7 +2990,7 @@ + fi + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 + $as_echo_n "checking for $CC option to accept ISO C89... " >&6; } +-if test "${ac_cv_prog_cc_c89+set}" = set; then : ++if ${ac_cv_prog_cc_c89+:} false; then : + $as_echo_n "(cached) " >&6 + else + ac_cv_prog_cc_c89=no +@@ -3128,7 +3151,7 @@ + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 + $as_echo_n "checking dependency style of $depcc... " >&6; } +-if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then : ++if ${am_cv_CC_dependencies_compiler_type+:} false; then : + $as_echo_n "(cached) " >&6 + else + if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then +@@ -3260,7 +3283,7 @@ + fi + set dummy $CC; ac_cc=`$as_echo "$2" | + sed 's/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/'` +-if { as_var=ac_cv_prog_cc_${ac_cc}_c_o; eval "test \"\${$as_var+set}\" = set"; }; then : ++if eval \${ac_cv_prog_cc_${ac_cc}_c_o+:} false; then : + $as_echo_n "(cached) " >&6 + else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +@@ -3380,13 +3403,18 @@ + + + ++ ++ ++ ++ ++ + if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}pkg-config", so it can be a program name with args. + set dummy ${ac_tool_prefix}pkg-config; ac_word=$2 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 + $as_echo_n "checking for $ac_word... " >&6; } +-if test "${ac_cv_path_PKG_CONFIG+set}" = set; then : ++if ${ac_cv_path_PKG_CONFIG+:} false; then : + $as_echo_n "(cached) " >&6 + else + case $PKG_CONFIG in +@@ -3429,7 +3457,7 @@ + set dummy pkg-config; ac_word=$2 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 + $as_echo_n "checking for $ac_word... " >&6; } +-if test "${ac_cv_path_ac_pt_PKG_CONFIG+set}" = set; then : ++if ${ac_cv_path_ac_pt_PKG_CONFIG+:} false; then : + $as_echo_n "(cached) " >&6 + else + case $ac_pt_PKG_CONFIG in +@@ -3492,53 +3520,52 @@ + $as_echo "no" >&6; } + PKG_CONFIG="" + fi +- + fi + + pkg_failed=no + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for HBAAPI" >&5 + $as_echo_n "checking for HBAAPI... " >&6; } + +-if test -n "$PKG_CONFIG"; then +- if test -n "$HBAAPI_CFLAGS"; then +- pkg_cv_HBAAPI_CFLAGS="$HBAAPI_CFLAGS" +- else +- if test -n "$PKG_CONFIG" && \ ++if test -n "$HBAAPI_CFLAGS"; then ++ pkg_cv_HBAAPI_CFLAGS="$HBAAPI_CFLAGS" ++ elif test -n "$PKG_CONFIG"; then ++ if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"HBAAPI\""; } >&5 + ($PKG_CONFIG --exists --print-errors "HBAAPI") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_HBAAPI_CFLAGS=`$PKG_CONFIG --cflags "HBAAPI" 2>/dev/null` ++ test "x$?" != "x0" && pkg_failed=yes + else + pkg_failed=yes + fi +- fi +-else +- pkg_failed=untried ++ else ++ pkg_failed=untried + fi +-if test -n "$PKG_CONFIG"; then +- if test -n "$HBAAPI_LIBS"; then +- pkg_cv_HBAAPI_LIBS="$HBAAPI_LIBS" +- else +- if test -n "$PKG_CONFIG" && \ ++if test -n "$HBAAPI_LIBS"; then ++ pkg_cv_HBAAPI_LIBS="$HBAAPI_LIBS" ++ elif test -n "$PKG_CONFIG"; then ++ if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"HBAAPI\""; } >&5 + ($PKG_CONFIG --exists --print-errors "HBAAPI") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_HBAAPI_LIBS=`$PKG_CONFIG --libs "HBAAPI" 2>/dev/null` ++ test "x$?" != "x0" && pkg_failed=yes + else + pkg_failed=yes + fi +- fi +-else +- pkg_failed=untried ++ else ++ pkg_failed=untried + fi + + + + if test $pkg_failed = yes; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } + + if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +@@ -3546,14 +3573,14 @@ + _pkg_short_errors_supported=no + fi + if test $_pkg_short_errors_supported = yes; then +- HBAAPI_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "HBAAPI"` ++ HBAAPI_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "HBAAPI" 2>&1` + else +- HBAAPI_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "HBAAPI"` ++ HBAAPI_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "HBAAPI" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$HBAAPI_PKG_ERRORS" >&5 + +- as_fn_error "Package requirements (HBAAPI) were not met: ++ as_fn_error $? "Package requirements (HBAAPI) were not met: + + $HBAAPI_PKG_ERRORS + +@@ -3562,12 +3589,13 @@ + + Alternatively, you may set the environment variables HBAAPI_CFLAGS + and HBAAPI_LIBS to avoid the need to call pkg-config. +-See the pkg-config man page for more details. +-" "$LINENO" 5 ++See the pkg-config man page for more details." "$LINENO" 5 + elif test $pkg_failed = untried; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 + $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +-as_fn_error "The pkg-config script could not be found or is too old. Make sure it ++as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it + is in your PATH or set the PKG_CONFIG environment variable to the full + path to pkg-config. + +@@ -3576,13 +3604,13 @@ + See the pkg-config man page for more details. + + To get pkg-config, see . +-See \`config.log' for more details." "$LINENO" 5; } ++See \`config.log' for more details" "$LINENO" 5; } + else + HBAAPI_CFLAGS=$pkg_cv_HBAAPI_CFLAGS + HBAAPI_LIBS=$pkg_cv_HBAAPI_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 + $as_echo "yes" >&6; } +- : ++ + fi + + +@@ -3611,46 +3639,46 @@ + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for DCBD" >&5 + $as_echo_n "checking for DCBD... " >&6; } + +-if test -n "$PKG_CONFIG"; then +- if test -n "$DCBD_CFLAGS"; then +- pkg_cv_DCBD_CFLAGS="$DCBD_CFLAGS" +- else +- if test -n "$PKG_CONFIG" && \ ++if test -n "$DCBD_CFLAGS"; then ++ pkg_cv_DCBD_CFLAGS="$DCBD_CFLAGS" ++ elif test -n "$PKG_CONFIG"; then ++ if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"dcbd\""; } >&5 + ($PKG_CONFIG --exists --print-errors "dcbd") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_DCBD_CFLAGS=`$PKG_CONFIG --cflags "dcbd" 2>/dev/null` ++ test "x$?" != "x0" && pkg_failed=yes + else + pkg_failed=yes + fi +- fi +-else +- pkg_failed=untried ++ else ++ pkg_failed=untried + fi +-if test -n "$PKG_CONFIG"; then +- if test -n "$DCBD_LIBS"; then +- pkg_cv_DCBD_LIBS="$DCBD_LIBS" +- else +- if test -n "$PKG_CONFIG" && \ ++if test -n "$DCBD_LIBS"; then ++ pkg_cv_DCBD_LIBS="$DCBD_LIBS" ++ elif test -n "$PKG_CONFIG"; then ++ if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"dcbd\""; } >&5 + ($PKG_CONFIG --exists --print-errors "dcbd") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_DCBD_LIBS=`$PKG_CONFIG --libs "dcbd" 2>/dev/null` ++ test "x$?" != "x0" && pkg_failed=yes + else + pkg_failed=yes + fi +- fi +-else +- pkg_failed=untried ++ else ++ pkg_failed=untried + fi + + + + if test $pkg_failed = yes; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } + + if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +@@ -3658,14 +3686,14 @@ + _pkg_short_errors_supported=no + fi + if test $_pkg_short_errors_supported = yes; then +- DCBD_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "dcbd"` ++ DCBD_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "dcbd" 2>&1` + else +- DCBD_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "dcbd"` ++ DCBD_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "dcbd" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$DCBD_PKG_ERRORS" >&5 + +- as_fn_error "Package requirements (dcbd) were not met: ++ as_fn_error $? "Package requirements (dcbd) were not met: + + $DCBD_PKG_ERRORS + +@@ -3674,12 +3702,13 @@ + + Alternatively, you may set the environment variables DCBD_CFLAGS + and DCBD_LIBS to avoid the need to call pkg-config. +-See the pkg-config man page for more details. +-" "$LINENO" 5 ++See the pkg-config man page for more details." "$LINENO" 5 + elif test $pkg_failed = untried; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 + $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +-as_fn_error "The pkg-config script could not be found or is too old. Make sure it ++as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it + is in your PATH or set the PKG_CONFIG environment variable to the full + path to pkg-config. + +@@ -3688,13 +3717,13 @@ + See the pkg-config man page for more details. + + To get pkg-config, see . +-See \`config.log' for more details." "$LINENO" 5; } ++See \`config.log' for more details" "$LINENO" 5; } + else + DCBD_CFLAGS=$pkg_cv_DCBD_CFLAGS + DCBD_LIBS=$pkg_cv_DCBD_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 + $as_echo "yes" >&6; } +- : ++ + fi + + fi +@@ -3765,10 +3794,21 @@ + :end' >>confcache + if diff "$cache_file" confcache >/dev/null 2>&1; then :; else + if test -w "$cache_file"; then +- test "x$cache_file" != "x/dev/null" && ++ if test "x$cache_file" != "x/dev/null"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5 + $as_echo "$as_me: updating cache $cache_file" >&6;} +- cat confcache >$cache_file ++ if test ! -f "$cache_file" || test -h "$cache_file"; then ++ cat confcache >"$cache_file" ++ else ++ case $cache_file in #( ++ */* | ?:*) ++ mv -f confcache "$cache_file"$$ && ++ mv -f "$cache_file"$$ "$cache_file" ;; #( ++ *) ++ mv -f confcache "$cache_file" ;; ++ esac ++ fi ++ fi + else + { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5 + $as_echo "$as_me: not updating unwritable cache $cache_file" >&6;} +@@ -3820,6 +3860,7 @@ + + ac_libobjs= + ac_ltlibobjs= ++U= + for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue + # 1. Remove the extension, and $U if already installed. + ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' +@@ -3843,19 +3884,19 @@ + fi + + if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then +- as_fn_error "conditional \"AMDEP\" was never defined. ++ as_fn_error $? "conditional \"AMDEP\" was never defined. + Usually this means the macro was only invoked conditionally." "$LINENO" 5 + fi + if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then +- as_fn_error "conditional \"am__fastdepCC\" was never defined. ++ as_fn_error $? "conditional \"am__fastdepCC\" was never defined. + Usually this means the macro was only invoked conditionally." "$LINENO" 5 + fi + if test -z "${WITH_DCB_TRUE}" && test -z "${WITH_DCB_FALSE}"; then +- as_fn_error "conditional \"WITH_DCB\" was never defined. ++ as_fn_error $? "conditional \"WITH_DCB\" was never defined. + Usually this means the macro was only invoked conditionally." "$LINENO" 5 + fi + +-: ${CONFIG_STATUS=./config.status} ++: "${CONFIG_STATUS=./config.status}" + ac_write_fail=0 + ac_clean_files_save=$ac_clean_files + ac_clean_files="$ac_clean_files $CONFIG_STATUS" +@@ -3956,6 +3997,7 @@ + IFS=" "" $as_nl" + + # Find who we are. Look in the path if we contain no directory separator. ++as_myself= + case $0 in #(( + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +@@ -4001,19 +4043,19 @@ + (unset CDPATH) >/dev/null 2>&1 && unset CDPATH + + +-# as_fn_error ERROR [LINENO LOG_FD] +-# --------------------------------- ++# as_fn_error STATUS ERROR [LINENO LOG_FD] ++# ---------------------------------------- + # Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are + # provided, also output the error to LOG_FD, referencing LINENO. Then exit the +-# script with status $?, using 1 if that was 0. ++# script with STATUS, using 1 if that was 0. + as_fn_error () + { +- as_status=$?; test $as_status -eq 0 && as_status=1 +- if test "$3"; then +- as_lineno=${as_lineno-"$2"} as_lineno_stack=as_lineno_stack=$as_lineno_stack +- $as_echo "$as_me:${as_lineno-$LINENO}: error: $1" >&$3 ++ as_status=$1; test $as_status -eq 0 && as_status=1 ++ if test "$4"; then ++ as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack ++ $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 + fi +- $as_echo "$as_me: error: $1" >&2 ++ $as_echo "$as_me: error: $2" >&2 + as_fn_exit $as_status + } # as_fn_error + +@@ -4209,7 +4251,7 @@ + test -d "$as_dir" && break + done + test -z "$as_dirs" || eval "mkdir $as_dirs" +- } || test -d "$as_dir" || as_fn_error "cannot create directory $as_dir" ++ } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" + + + } # as_fn_mkdir_p +@@ -4263,7 +4305,7 @@ + # values after options handling. + ac_log=" + This file was extended by fcoe-utils $as_me 1.0.9, which was +-generated by GNU Autoconf 2.65. Invocation command line was ++generated by GNU Autoconf 2.68. Invocation command line was + + CONFIG_FILES = $CONFIG_FILES + CONFIG_HEADERS = $CONFIG_HEADERS +@@ -4320,10 +4362,10 @@ + ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" + ac_cs_version="\\ + fcoe-utils config.status 1.0.9 +-configured by $0, generated by GNU Autoconf 2.65, ++configured by $0, generated by GNU Autoconf 2.68, + with options \\"\$ac_cs_config\\" + +-Copyright (C) 2009 Free Software Foundation, Inc. ++Copyright (C) 2010 Free Software Foundation, Inc. + This config.status script is free software; the Free Software Foundation + gives unlimited permission to copy, distribute and modify it." + +@@ -4341,11 +4383,16 @@ + while test $# != 0 + do + case $1 in +- --*=*) ++ --*=?*) + ac_option=`expr "X$1" : 'X\([^=]*\)='` + ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` + ac_shift=: + ;; ++ --*=) ++ ac_option=`expr "X$1" : 'X\([^=]*\)='` ++ ac_optarg= ++ ac_shift=: ++ ;; + *) + ac_option=$1 + ac_optarg=$2 +@@ -4367,6 +4414,7 @@ + $ac_shift + case $ac_optarg in + *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; ++ '') as_fn_error $? "missing file argument" ;; + esac + as_fn_append CONFIG_FILES " '$ac_optarg'" + ac_need_defaults=false;; +@@ -4377,7 +4425,7 @@ + ac_cs_silent=: ;; + + # This is an error. +- -*) as_fn_error "unrecognized option: \`$1' ++ -*) as_fn_error $? "unrecognized option: \`$1' + Try \`$0 --help' for more information." ;; + + *) as_fn_append ac_config_targets " $1" +@@ -4437,7 +4485,7 @@ + "fcoe-utils.spec") CONFIG_FILES="$CONFIG_FILES fcoe-utils.spec" ;; + "fcoe_utils.h") CONFIG_FILES="$CONFIG_FILES fcoe_utils.h" ;; + +- *) as_fn_error "invalid argument: \`$ac_config_target'" "$LINENO" 5;; ++ *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;; + esac + done + +@@ -4459,9 +4507,10 @@ + # after its creation but before its name has been assigned to `$tmp'. + $debug || + { +- tmp= ++ tmp= ac_tmp= + trap 'exit_status=$? +- { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status ++ : "${ac_tmp:=$tmp}" ++ { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status + ' 0 + trap 'as_fn_exit 1' 1 2 13 15 + } +@@ -4469,12 +4518,13 @@ + + { + tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && +- test -n "$tmp" && test -d "$tmp" ++ test -d "$tmp" + } || + { + tmp=./conf$$-$RANDOM + (umask 077 && mkdir "$tmp") +-} || as_fn_error "cannot create a temporary directory in ." "$LINENO" 5 ++} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5 ++ac_tmp=$tmp + + # Set up the scripts for CONFIG_FILES section. + # No need to generate them if there are no CONFIG_FILES. +@@ -4491,12 +4541,12 @@ + fi + ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null` + if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then +- ac_cs_awk_cr='\r' ++ ac_cs_awk_cr='\\r' + else + ac_cs_awk_cr=$ac_cr + fi + +-echo 'BEGIN {' >"$tmp/subs1.awk" && ++echo 'BEGIN {' >"$ac_tmp/subs1.awk" && + _ACEOF + + +@@ -4505,18 +4555,18 @@ + echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && + echo "_ACEOF" + } >conf$$subs.sh || +- as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5 +-ac_delim_num=`echo "$ac_subst_vars" | grep -c '$'` ++ as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 ++ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'` + ac_delim='%!_!# ' + for ac_last_try in false false false false false :; do + . ./conf$$subs.sh || +- as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5 ++ as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 + + ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` + if test $ac_delim_n = $ac_delim_num; then + break + elif $ac_last_try; then +- as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5 ++ as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 + else + ac_delim="$ac_delim!$ac_delim _$ac_delim!! " + fi +@@ -4524,7 +4574,7 @@ + rm -f conf$$subs.sh + + cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +-cat >>"\$tmp/subs1.awk" <<\\_ACAWK && ++cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK && + _ACEOF + sed -n ' + h +@@ -4572,7 +4622,7 @@ + rm -f conf$$subs.awk + cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 + _ACAWK +-cat >>"\$tmp/subs1.awk" <<_ACAWK && ++cat >>"\$ac_tmp/subs1.awk" <<_ACAWK && + for (key in S) S_is_set[key] = 1 + FS = "" + +@@ -4604,21 +4654,29 @@ + sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" + else + cat +-fi < "$tmp/subs1.awk" > "$tmp/subs.awk" \ +- || as_fn_error "could not setup config files machinery" "$LINENO" 5 ++fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \ ++ || as_fn_error $? "could not setup config files machinery" "$LINENO" 5 + _ACEOF + +-# VPATH may cause trouble with some makes, so we remove $(srcdir), +-# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and ++# VPATH may cause trouble with some makes, so we remove sole $(srcdir), ++# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and + # trailing colons and then remove the whole line if VPATH becomes empty + # (actually we leave an empty line to preserve line numbers). + if test "x$srcdir" = x.; then +- ac_vpsub='/^[ ]*VPATH[ ]*=/{ +-s/:*\$(srcdir):*/:/ +-s/:*\${srcdir}:*/:/ +-s/:*@srcdir@:*/:/ +-s/^\([^=]*=[ ]*\):*/\1/ ++ ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{ ++h ++s/// ++s/^/:/ ++s/[ ]*$/:/ ++s/:\$(srcdir):/:/g ++s/:\${srcdir}:/:/g ++s/:@srcdir@:/:/g ++s/^:*// + s/:*$// ++x ++s/\(=[ ]*\).*/\1/ ++G ++s/\n// + s/^[^=]*=[ ]*$// + }' + fi +@@ -4636,7 +4694,7 @@ + esac + case $ac_mode$ac_tag in + :[FHL]*:*);; +- :L* | :C*:*) as_fn_error "invalid tag \`$ac_tag'" "$LINENO" 5;; ++ :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;; + :[FH]-) ac_tag=-:-;; + :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; + esac +@@ -4655,7 +4713,7 @@ + for ac_f + do + case $ac_f in +- -) ac_f="$tmp/stdin";; ++ -) ac_f="$ac_tmp/stdin";; + *) # Look for the file first in the build tree, then in the source tree + # (if the path is not absolute). The absolute path cannot be DOS-style, + # because $ac_f cannot contain `:'. +@@ -4664,7 +4722,7 @@ + [\\/$]*) false;; + *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; + esac || +- as_fn_error "cannot find input file: \`$ac_f'" "$LINENO" 5;; ++ as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;; + esac + case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac + as_fn_append ac_file_inputs " '$ac_f'" +@@ -4690,8 +4748,8 @@ + esac + + case $ac_tag in +- *:-:* | *:-) cat >"$tmp/stdin" \ +- || as_fn_error "could not create $ac_file" "$LINENO" 5 ;; ++ *:-:* | *:-) cat >"$ac_tmp/stdin" \ ++ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; + esac + ;; + esac +@@ -4827,23 +4885,24 @@ + s&@MKDIR_P@&$ac_MKDIR_P&;t t + $ac_datarootdir_hack + " +-eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$tmp/subs.awk" >$tmp/out \ +- || as_fn_error "could not create $ac_file" "$LINENO" 5 ++eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \ ++ >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + + test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && +- { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } && +- { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } && ++ { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } && ++ { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \ ++ "$ac_tmp/out"`; test -z "$ac_out"; } && + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir' +-which seems to be undefined. Please make sure it is defined." >&5 ++which seems to be undefined. Please make sure it is defined" >&5 + $as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' +-which seems to be undefined. Please make sure it is defined." >&2;} ++which seems to be undefined. Please make sure it is defined" >&2;} + +- rm -f "$tmp/stdin" ++ rm -f "$ac_tmp/stdin" + case $ac_file in +- -) cat "$tmp/out" && rm -f "$tmp/out";; +- *) rm -f "$ac_file" && mv "$tmp/out" "$ac_file";; ++ -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";; ++ *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";; + esac \ +- || as_fn_error "could not create $ac_file" "$LINENO" 5 ++ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + ;; + + +@@ -4959,7 +5018,7 @@ + ac_clean_files=$ac_clean_files_save + + test $ac_write_fail = 0 || +- as_fn_error "write failure creating $CONFIG_STATUS" "$LINENO" 5 ++ as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5 + + + # configure is writing to config.log, and then calls config.status. +@@ -4980,7 +5039,7 @@ + exec 5>>config.log + # Use ||, not &&, to avoid exiting from the if with $? = 1, which + # would make configure fail if this is the last instruction. +- $ac_cs_success || as_fn_exit $? ++ $ac_cs_success || as_fn_exit 1 + fi + if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 +diff -Nur -x '*.orig' -x '*~' fcoe-utils-1.0.9//Makefile.in fcoe-utils-1.0.9.new//Makefile.in +--- fcoe-utils-1.0.9//Makefile.in 2011-09-14 08:24:28.000000000 -0400 ++++ fcoe-utils-1.0.9.new//Makefile.in 2011-09-14 11:57:05.000000000 -0400 +@@ -61,14 +61,15 @@ + am_fcoeadm_OBJECTS = fcoeadm-fcoeadm_display.$(OBJEXT) \ + fcoeadm-fcoeadm.$(OBJEXT) + fcoeadm_OBJECTS = $(am_fcoeadm_OBJECTS) +-fcoeadm_LDADD = $(LDADD) +-fcoeadm_LINK = $(CCLD) $(fcoeadm_CFLAGS) $(CFLAGS) $(fcoeadm_LDFLAGS) \ ++am__DEPENDENCIES_1 = ++fcoeadm_DEPENDENCIES = $(am__DEPENDENCIES_1) ++fcoeadm_LINK = $(CCLD) $(fcoeadm_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \ + $(LDFLAGS) -o $@ + am_fcoemon_OBJECTS = fcoemon-fcoemon_utils.$(OBJEXT) \ + fcoemon-fcoemon.$(OBJEXT) + fcoemon_OBJECTS = $(am_fcoemon_OBJECTS) +-fcoemon_LDADD = $(LDADD) +-fcoemon_LINK = $(CCLD) $(fcoemon_CFLAGS) $(CFLAGS) $(fcoemon_LDFLAGS) \ ++fcoemon_DEPENDENCIES = ++fcoemon_LINK = $(CCLD) $(fcoemon_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \ + $(LDFLAGS) -o $@ + am_fipvlan_OBJECTS = fipvlan.$(OBJEXT) log.$(OBJEXT) + fipvlan_OBJECTS = $(am_fipvlan_OBJECTS) +@@ -166,6 +167,8 @@ + PACKAGE_VERSION = @PACKAGE_VERSION@ + PATH_SEPARATOR = @PATH_SEPARATOR@ + PKG_CONFIG = @PKG_CONFIG@ ++PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ ++PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ + SET_MAKE = @SET_MAKE@ + SHELL = @SHELL@ + STRIP = @STRIP@ +@@ -218,7 +221,7 @@ + include/fc_scsi.h include/fc_types.h include/net_types.h + + fcoeadm_CFLAGS = $(HBAAPI_CFLAGS) +-fcoeadm_LDFLAGS = $(HBAAPI_LIBS) ++fcoeadm_LDADD = $(HBAAPI_LIBS) + + #fcping_SOURCES = fcping.c + +@@ -228,7 +231,7 @@ + fcoe_utils.h include/fc_scsi.h include/fc_types.h include/net_types.h + + fcoemon_CFLAGS = $(DCBD_CFLAGS) +-fcoemon_LDFLAGS = -lrt ++fcoemon_LDADD = -lrt + fipvlan_SOURCES = fipvlan.c fcoe_utils.h include/fip.h \ + log.c include/log.h include/list.h + +@@ -366,6 +369,40 @@ + test -n "$$list" || exit 0; \ + echo " ( cd '$(DESTDIR)$(fcoe_scriptsdir)' && rm -f" $$files ")"; \ + cd "$(DESTDIR)$(fcoe_scriptsdir)" && rm -f $$files ++install-init_dSCRIPTS: $(init_d_SCRIPTS) ++ @$(NORMAL_INSTALL) ++ test -z "$(init_ddir)" || $(MKDIR_P) "$(DESTDIR)$(init_ddir)" ++ @list='$(init_d_SCRIPTS)'; test -n "$(init_ddir)" || list=; \ ++ for p in $$list; do \ ++ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ ++ if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \ ++ done | \ ++ sed -e 'p;s,.*/,,;n' \ ++ -e 'h;s|.*|.|' \ ++ -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \ ++ $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \ ++ { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ ++ if ($$2 == $$4) { files[d] = files[d] " " $$1; \ ++ if (++n[d] == $(am__install_max)) { \ ++ print "f", d, files[d]; n[d] = 0; files[d] = "" } } \ ++ else { print "f", d "/" $$4, $$1 } } \ ++ END { for (d in files) print "f", d, files[d] }' | \ ++ while read type dir files; do \ ++ if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ ++ test -z "$$files" || { \ ++ echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(init_ddir)$$dir'"; \ ++ $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(init_ddir)$$dir" || exit $$?; \ ++ } \ ++ ; done ++ ++uninstall-init_dSCRIPTS: ++ @$(NORMAL_UNINSTALL) ++ @list='$(init_d_SCRIPTS)'; test -n "$(init_ddir)" || exit 0; \ ++ files=`for p in $$list; do echo "$$p"; done | \ ++ sed -e 's,.*/,,;$(transform)'`; \ ++ test -n "$$list" || exit 0; \ ++ echo " ( cd '$(DESTDIR)$(init_ddir)' && rm -f" $$files ")"; \ ++ cd "$(DESTDIR)$(init_ddir)" && rm -f $$files + + mostlyclean-compile: + -rm -f *.$(OBJEXT)